DATE: 2024-12-01 TIME: 17:16:06 run inlist_pulses_header DATE: 2024-12-01 TIME: 17:16:06 read /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/eosDT_data/helm_table.dat write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/eosDT_data/cache/helm_table.bin reading user weak rate file /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number c24d220 read inlist_pulses read inlist_ppisn read inlist_extra The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_LNuc' is log10 nuclear power (Lsun), 'lg_LNeu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_mg24_ag_si28 create rate data for r_si28_ga_mg24 create rate data for r_ne20_ag_mg24 create rate data for r_mg24_ga_ne20 create rate data for r_o16_ag_ne20 create rate data for r_ne20_ga_o16 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 create rate data for r34_pp3 create rate data for r1212 create rate data for r34_pp2 create rate data for r_h1_he3_wk_he4 create rate data for r_he3_he3_to_h1_h1_he4 create rate data for r1216_to_mg24 create rate data for r1216_to_si28 create rate data for r1616 create rate data for ral27pa_aux create rate data for ral27pg_aux create rate data for rbe7ec_li7_aux create rate data for rbe7pg_b8_aux create rate data for rc12_to_n14 create rate data for rc12ap_aux create rate data for rc12ap_to_o16 create rate data for rf19pa_aux create rate data for rf19pg_aux create rate data for rmg24ap_aux create rate data for rmg24ap_to_si28 create rate data for rmg24gp_aux create rate data for rmg24gp_to_ne20 create rate data for rn14_to_c12 create rate data for rn14_to_o16 create rate data for rn14ag_lite create rate data for rn14pg_aux create rate data for rn15pa_aux create rate data for rn15pg_aux create rate data for rna23pa_aux create rate data for rna23pg_aux create rate data for rne20ap_aux create rate data for rne20ap_to_mg24 create rate data for rne20gp_aux create rate data for rne20gp_to_o16 create rate data for ro16_to_n14 create rate data for ro16ap_aux create rate data for ro16ap_to_ne20 create rate data for ro16gp_aux create rate data for ro16gp_to_c12 create rate data for rpep_to_he3 create rate data for rpp_to_he3 create rate data for rsi28gp_aux create rate data for rsi28gp_to_mg24 number not already in cache: 52 write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_c12_ag_o16_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_o16_ga_c12_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_mg24_ag_si28_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_si28_ga_mg24_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_ne20_ag_mg24_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_mg24_ga_ne20_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_o16_ag_ne20_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_ne20_ga_o16_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r34_pp3_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r1212_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r34_pp2_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_h1_he3_wk_he4_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_he3_he3_to_h1_h1_he4_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r1216_to_mg24_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r1216_to_si28_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r1616_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ral27pa_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ral27pg_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rbe7ec_li7_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rbe7pg_b8_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rc12_to_n14_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rc12ap_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rc12ap_to_o16_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rf19pa_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rf19pg_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rmg24ap_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rmg24ap_to_si28_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rmg24gp_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rmg24gp_to_ne20_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn14_to_c12_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn14_to_o16_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn14ag_lite_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn14pg_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn15pa_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rn15pg_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rna23pa_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rna23pg_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rne20ap_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rne20ap_to_mg24_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rne20gp_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rne20gp_to_o16_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ro16_to_n14_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ro16ap_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ro16ap_to_ne20_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ro16gp_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/ro16gp_to_c12_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rpep_to_he3_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rpp_to_he3_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rsi28gp_aux_1.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/rsi28gp_to_mg24_1.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/eosDT_data/cache/mesa-FreeEOS_70z00x.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/eosDT_data/cache/mesa-FreeEOS_80z00x_CO.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/gs98_co_z0.004_x0.03.bin set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 16 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1578 1580 8.552300 1.571E+05 -11.720683 6.201394 51.891032 0.000000 0.000000 0.000000 0.224541 -4.771204 2680 0 2.0896E+00 8.552300 0.329328 0.743436 4.146266 -99.000000 51.891032 0.000446 0.800793 0.775459 0.153351 4 2.8410E+05 3.007828 6.398204 6.201393 -52.386746 -8.730420 49.084165 0.153191 0.039932 0.000000 -0.752E-08 lgRho_cntr log_rel_run_E_err -10.9702112876724609 rel_E_err 1.0709981294779287D-11 png/grid_001580.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9144870840046706E-002 1590 8.578522 1.611E+05 -13.303151 5.381696 51.891032 0.000000 0.000000 0.000000 0.224541 -4.686281 2680 0 1.2421E+00 8.578522 0.309657 -3.455826 4.339879 -99.000000 51.891032 0.000013 0.799875 0.775459 0.153736 5 2.8455E+05 3.086804 6.402565 5.381696 -47.673507 -8.734023 49.084165 0.152946 0.041287 0.000000 -0.182E-07 lg_XHe_cntr log_rel_run_E_err -10.9794876730040460 rel_E_err 1.0483645498931336D-11 png/grid_001590.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8868636371817348E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1600 8.587271 1.625E+05 -15.812678 4.348125 51.891032 0.000000 0.000000 0.000000 0.224540 -4.657955 2680 0 9.2773E-01 8.587271 0.303116 -6.904910 4.404364 -99.000000 51.891032 0.000001 0.799842 0.775460 0.153762 4 2.8466E+05 3.113187 6.403968 4.348125 -46.166266 -8.732859 49.084165 0.152941 0.041331 0.000000 -0.184E-07 max increase log_rel_run_E_err -10.9945350761471783 rel_E_err 1.0126629569639468D-11 save LOGS/profile2.data for model 1600 save photos/x600 for model 1600 png/grid_001600.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8776284986724691E-002 1610 8.603236 1.649E+05 -19.226672 0.882922 51.891032 0.000000 0.000000 0.000000 0.224540 -4.606339 2682 0 1.2858E+00 8.603236 0.291662 -6.643587 4.521972 -99.000000 51.891032 0.000000 0.799840 0.775460 0.153793 3 2.8484E+05 3.161342 6.406618 0.882922 -43.492410 -8.730082 49.084165 0.152941 0.041333 0.000000 -0.163E-07 lgRho_cntr log_rel_run_E_err -10.9918019223602261 rel_E_err 1.0190560639915426D-11 png/grid_001610.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8604181642653004E-002 1620 8.621416 1.675E+05 -20.718594 -0.380480 51.891032 0.000000 0.000000 0.000000 0.224540 -4.547701 2798 0 1.2910E+00 8.621416 0.279487 -5.948602 4.655973 -99.000000 51.891032 0.000000 0.799840 0.775460 0.153830 4 2.8505E+05 3.216194 6.409787 -0.380481 -40.562595 -8.727060 49.084165 0.152941 0.041333 0.000000 -0.139E-07 lgRho_cntr log_rel_run_E_err -10.9769726491619615 rel_E_err 1.0544533012721396D-11 png/grid_001620.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8401745545240897E-002 1630 8.640503 1.709E+05 -20.256098 -0.010408 51.886180 0.000000 0.000000 0.000000 0.224130 -4.486251 2875 0 1.4600E+00 8.640503 0.261367 -5.251048 4.797138 -4.178134 51.886180 0.000000 0.799840 0.775870 0.153874 5 2.8528E+05 3.273823 6.408760 -0.010411 -37.612928 -8.679623 49.084165 0.152941 0.041333 0.000000 -0.172E-07 lgRho_cntr log_rel_run_E_err -10.9676111762608457 rel_E_err 1.0774294042171110D-11 png/grid_001630.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8183611766809221E-002 1640 8.658922 1.739E+05 -20.454389 0.339932 51.870755 0.000000 0.000000 0.000000 0.222905 -4.426868 2930 0 1.3969E+00 8.658922 0.247875 -4.614640 4.934651 -4.172864 51.870755 0.000000 0.799840 0.777095 0.153930 5 2.8551E+05 3.329561 6.411218 0.339927 -34.884072 -8.663755 49.084165 0.152941 0.041333 0.000000 -0.125E-07 lgRho_cntr log_rel_run_E_err -10.9763175668797732 rel_E_err 1.0560450205463706D-11 png/grid_001640.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7969938918280150E-002 1650 8.677183 1.765E+05 -19.496390 0.682399 51.854951 0.000000 0.000000 0.000000 0.221453 -4.367887 2923 0 1.3647E+00 8.677183 0.236125 -4.008108 5.073990 -4.166869 51.854951 0.000000 0.799840 0.778547 0.154003 5 2.8574E+05 3.384957 6.413987 0.682390 -32.287882 -8.651879 49.084165 0.152941 0.041333 0.000000 -0.107E-07 lgRho_cntr log_rel_run_E_err -10.9622105005976316 rel_E_err 1.0909114483726965D-11 save photos/x650 for model 1650 png/grid_001650.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7750743727389494E-002 1660 8.695255 1.790E+05 -19.607894 1.016610 51.838865 0.000000 0.000000 0.000000 0.220467 -4.309261 2936 0 1.3687E+00 8.695255 0.225317 -3.430952 5.217952 -4.160835 51.838865 0.000000 0.799840 0.779533 0.154098 5 2.8598E+05 3.439981 6.416832 1.016594 -29.821069 -8.641267 49.084165 0.152941 0.041333 0.000000 -0.951E-08 lgRho_cntr log_rel_run_E_err -10.9695801350727820 rel_E_err 1.0725557239275334D-11 png/grid_001660.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7526421943352430E-002 1670 8.711744 1.812E+05 -19.084698 1.317534 51.823885 0.000000 0.000000 0.000000 0.219795 -4.255283 2950 0 1.3286E+00 8.711744 0.216088 -2.924029 5.358957 -4.155061 51.823885 0.000000 0.799840 0.780205 0.154220 5 2.8619E+05 3.490478 6.419462 1.317509 -27.655776 -8.632405 49.084165 0.152941 0.041333 0.000000 -0.863E-08 lgRho_cntr log_rel_run_E_err -10.9724711425522550 rel_E_err 1.0654396562956710D-11 png/grid_001670.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7315166934213324E-002 1680 8.727992 1.833E+05 -18.866872 1.610595 51.808967 0.000000 0.000000 0.000000 0.219494 -4.201186 2959 0 1.3218E+00 8.727992 0.207493 -2.442241 5.512616 -4.149170 51.808967 0.000000 0.799840 0.780506 0.154396 5 2.8641E+05 3.540708 6.422063 1.610557 -25.598696 -8.624470 49.084165 0.152941 0.041333 0.000000 -0.790E-08 lgRho_cntr log_rel_run_E_err -10.9636972089066358 rel_E_err 1.0871833461270884D-11 png/grid_001680.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7100637148020805E-002 1690 8.744082 1.852E+05 -19.148206 1.897524 51.794273 0.000000 0.000000 0.000000 0.219347 -4.145879 2976 0 1.3039E+00 8.744082 0.199451 -1.982173 5.685382 -4.143412 51.794273 0.000000 0.799840 0.780653 0.154669 5 2.8661E+05 3.591280 6.424624 1.897466 -23.633555 -8.617400 49.084165 0.152941 0.041333 0.000000 -0.745E-08 lgRho_cntr log_rel_run_E_err -10.9814392583867022 rel_E_err 1.0436640922338280D-11 png/grid_001690.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6881702025006890E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.759899 1.871E+05 -18.371182 2.175904 51.780286 0.000000 0.000000 0.000000 0.219217 -4.088399 2985 0 1.2680E+00 8.759899 0.191929 -1.546350 5.879985 -4.137929 51.780286 0.000000 0.799839 0.780783 0.155107 5 2.8680E+05 3.642414 6.427099 2.175822 -21.768799 -8.610982 49.084165 0.152941 0.041333 0.000000 -0.736E-08 lgRho_cntr log_rel_run_E_err -10.9798524132784276 rel_E_err 1.0474844552475409D-11 save LOGS/profile3.data for model 1700 save photos/x700 for model 1700 png/grid_001700.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6659855367539180E-002 1710 8.775281 1.889E+05 -18.525614 2.441794 51.767662 0.000000 0.000000 0.000000 0.219019 -4.027497 3000 0 1.2051E+00 8.775281 0.184830 -1.138168 6.094012 -4.132855 51.767662 0.000000 0.799839 0.780981 0.155802 4 2.8698E+05 3.694379 6.429427 2.441680 -20.016307 -8.604629 49.084165 0.152941 0.041334 0.000000 -0.790E-08 lgRho_cntr log_rel_run_E_err -10.9838879215708918 rel_E_err 1.0377962054536661D-11 png/grid_001710.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6437372371195530E-002 1720 8.790067 1.906E+05 -19.165910 2.692851 51.757055 0.000000 0.000000 0.000000 0.218716 -3.962091 3007 0 1.1089E+00 8.790067 0.177977 -0.760393 6.320071 -4.128258 51.757055 0.000000 0.799839 0.781284 0.156837 5 2.8712E+05 3.747364 6.431546 2.692698 -18.386104 -8.597367 49.084165 0.152940 0.041335 0.000000 -0.942E-08 lgRho_cntr log_rel_run_E_err -10.9807351866122964 rel_E_err 1.0453574372268777D-11 png/grid_001720.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6216756121065163E-002 1730 8.804175 1.924E+05 -19.486884 2.935989 51.748817 0.000000 0.000000 0.000000 0.218355 -3.891894 3008 0 9.7968E-01 8.804175 0.171139 -0.413041 6.549530 -4.124222 51.748817 0.000000 0.799837 0.781645 0.158247 4 2.8723E+05 3.801345 6.433420 2.935794 -16.878513 -8.588228 49.084165 0.152938 0.041339 0.000000 -0.126E-07 lgRho_cntr log_rel_run_E_err -10.9802620163602302 rel_E_err 1.0464969902606748D-11 png/grid_001730.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5999518041121394E-002 1740 8.817647 1.941E+05 -19.271693 3.189822 51.742846 0.000000 0.000000 0.000000 0.218020 -3.817563 3007 0 8.2462E-01 8.817647 0.164110 -0.092662 6.776386 -4.120766 51.742846 0.000000 0.799834 0.781980 0.159998 4 2.8731E+05 3.856099 6.435053 3.189595 -15.481132 -8.576586 49.084165 0.152933 0.041347 0.000000 -0.183E-07 lgRho_cntr log_rel_run_E_err -10.9816525125439721 rel_E_err 1.0431517415574834D-11 png/grid_001740.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5785248314151428E-002 1750 8.830619 1.959E+05 -19.277056 3.472722 51.738727 0.000000 0.000000 0.000000 0.217747 -3.740244 3014 0 6.5285E-01 8.830619 0.156774 0.206187 6.998141 -4.117796 51.738727 0.000000 0.799827 0.782253 0.162018 4 2.8736E+05 3.911345 6.436476 3.472487 -14.173891 -8.562283 49.084165 0.152923 0.041363 0.000000 -0.280E-07 lgRho_cntr log_rel_run_E_err -10.9824107366210271 rel_E_err 1.0413321174147582D-11 save photos/x750 for model 1750 png/grid_001750.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5571812805969586E-002 1760 8.843250 1.978E+05 -19.307072 3.791221 51.735969 0.000000 0.000000 0.000000 0.217547 -3.661058 3022 0 4.7182E-01 8.843250 0.149076 0.488938 7.214514 -4.115236 51.735969 0.000000 0.799815 0.782453 0.164228 4 2.8740E+05 3.966863 6.437729 3.791005 -12.936403 -8.545409 49.084165 0.152904 0.041394 0.000000 -0.439E-07 lgRho_cntr log_rel_run_E_err -10.9882337077276553 rel_E_err 1.0274632385549298D-11 png/grid_001760.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5356196419731064E-002 1770 8.855677 1.998E+05 -19.426995 4.141154 51.734153 0.000000 0.000000 0.000000 0.217410 -3.580880 3033 0 2.8641E-01 8.855677 0.141015 0.759942 7.426050 -4.112980 51.734153 0.000000 0.799794 0.782590 0.166565 4 2.8742E+05 4.022505 6.438850 4.140973 -11.752126 -8.526205 49.084165 0.152871 0.041448 0.000000 -0.691E-07 lgRho_cntr log_rel_run_E_err -11.0021694673752499 rel_E_err 9.9501707293910198D-12 png/grid_001770.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5135144179579631E-002 1780 8.868008 2.018E+05 -19.813738 4.514067 51.732964 0.000000 0.000000 0.000000 0.217317 -3.500319 3039 0 9.9569E-02 8.868008 0.132615 1.022297 7.633386 -4.110997 51.732964 0.000000 0.799756 0.782683 0.168982 4 2.8744E+05 4.078184 6.439868 4.513927 -10.609130 -8.505014 49.084165 0.152814 0.041542 0.000000 -0.109E-06 lgRho_cntr log_rel_run_E_err -10.9960533249363781 rel_E_err 1.0091289723631334D-11 png/grid_001780.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4905370340243528E-002 1790 8.880316 2.040E+05 -19.981122 4.901861 51.732187 0.000000 0.000000 0.000000 0.217254 -3.419789 3051 0 -8.6960E-02 8.880316 0.123903 1.278087 7.837014 -4.109219 51.732187 0.000000 0.799692 0.782746 0.171448 4 2.8745E+05 4.133848 6.440806 4.901758 -9.499258 -8.482178 49.084165 0.152716 0.041703 0.000000 -0.170E-06 lgRho_cntr log_rel_run_E_err -10.9979692344829463 rel_E_err 1.0046869600037523D-11 png/grid_001790.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4663489275604387E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.892653 2.062E+05 -19.862973 5.298537 51.731679 0.000000 0.000000 0.000000 0.217213 -3.339564 3056 0 -2.7210E-01 8.892653 0.114919 1.528680 8.037262 -4.107609 51.731679 0.000000 0.799581 0.782787 0.173946 4 2.8746E+05 4.189464 6.441681 5.298463 -8.416959 -8.458045 49.084165 0.152547 0.041979 0.000000 -0.264E-06 lgRho_cntr log_rel_run_E_err -10.9926064225421189 rel_E_err 1.0171700812033604D-11 save LOGS/profile4.data for model 1800 save photos/x800 for model 1800 png/grid_001800.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4405833643390534E-002 1810 8.905055 2.085E+05 -19.400664 5.700193 51.731346 0.000000 0.000000 0.000000 0.217184 -3.259841 3067 0 -4.5515E-01 8.905055 0.105698 1.774991 8.234349 -4.106162 51.731346 0.000000 0.799393 0.782816 0.176467 4 2.8746E+05 4.245010 6.442506 5.700141 -7.358236 -8.432919 49.084165 0.152261 0.042449 0.000000 -0.407E-06 lgRho_cntr log_rel_run_E_err -10.9893861326842472 rel_E_err 1.0247404209461146D-11 png/grid_001810.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4128237902506272E-002 1820 8.917552 2.109E+05 -19.436479 6.104450 51.731125 0.000000 0.000000 0.000000 0.217166 -3.180775 3074 0 -6.3559E-01 8.917552 0.096270 2.017674 8.428447 -4.104849 51.731125 0.000000 0.799073 0.782834 0.179013 4 2.8746E+05 4.300471 6.443295 6.104415 -6.319777 -8.407035 49.084165 0.151774 0.043251 0.000001 -0.624E-06 lgRho_cntr log_rel_run_E_err -11.0065646482461350 rel_E_err 9.8499800697049528D-12 png/grid_001820.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3825804767204268E-002 1830 8.930171 2.133E+05 -18.324549 6.509900 51.730979 0.000000 0.000000 0.000000 0.217154 -3.102514 3082 0 -8.1293E-01 8.930171 0.086654 2.257266 8.619740 -4.103690 51.730979 0.000000 0.798527 0.782846 0.181599 4 2.8746E+05 4.355831 6.444056 6.509875 -5.298187 -8.380339 49.084165 0.150942 0.044617 0.000001 -0.935E-06 lgRho_cntr log_rel_run_E_err -11.0035682244398725 rel_E_err 9.9181751982904080D-12 png/grid_001830.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3492637834372266E-002 1840 8.942947 2.158E+05 -17.175478 6.915707 51.730881 0.000000 0.000000 0.000000 0.217145 -3.025242 3086 0 -9.8661E-01 8.942947 0.076876 2.494324 8.808494 -4.102658 51.730881 0.000000 0.797594 0.782855 0.184257 4 2.8747E+05 4.411072 6.444802 6.915690 -4.289192 -8.352644 49.084165 0.149521 0.046951 0.000002 -0.140E-05 lgRho_cntr log_rel_run_E_err -11.0014879766248459 rel_E_err 9.9657966990594754D-12 png/grid_001840.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3121492529730153E-002 1850 8.955929 2.184E+05 -16.030323 7.321346 51.730815 0.000000 0.000000 0.000000 0.217139 -2.949223 3101 0 -1.1559E+00 8.955929 0.066933 2.729550 8.995135 -4.101665 51.730815 0.000000 0.796000 0.782861 0.187051 4 2.8747E+05 4.466168 6.445543 7.321335 -3.286719 -8.323674 49.084165 0.147091 0.050938 0.000003 -0.207E-05 lgRho_cntr log_rel_run_E_err -11.0155911562540663 rel_E_err 9.6473679709225347D-12 save photos/x850 for model 1850 png/grid_001850.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2703249707592768E-002 1860 8.969197 2.197E+05 -14.839752 7.726376 51.730810 0.000000 0.000000 0.000000 0.217139 -2.874872 3105 0 -1.3195E+00 8.969197 0.064787 2.964001 9.180370 -99.000000 51.730810 0.000000 0.793284 0.782861 0.190093 3 2.8747E+05 4.521080 6.451764 7.726368 -2.281857 -8.349828 49.084165 0.142941 0.057734 0.000006 -0.257E-05 lgRho_cntr log_rel_run_E_err -11.4167647283959646 rel_E_err -3.8303218825551507D-12 png/grid_001860.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2226008329548828E-002 1870 8.982869 2.223E+05 -13.768589 8.129967 51.730810 0.000000 0.000000 0.000000 0.217139 -2.802820 3115 0 -1.4757E+00 8.982869 0.055252 3.199159 9.365290 -99.000000 51.730810 0.000000 0.788696 0.782861 0.193580 3 2.8747E+05 4.575751 6.452807 8.129962 -1.262301 -8.321648 49.084165 0.135907 0.069212 0.000012 -0.401E-05 lgRho_cntr log_rel_run_E_err -11.4347016375961541 rel_E_err -3.6753471190407619D-12 png/grid_001870.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1673754919730771E-002 1880 8.997111 2.250E+05 -12.672488 8.529892 51.730810 0.000000 0.000000 0.000000 0.217139 -2.733887 3124 0 -1.6226E+00 8.997111 0.045060 3.437174 9.551464 -99.000000 51.730810 0.000000 0.781138 0.782861 0.197831 3 2.8747E+05 4.630120 6.453756 8.529889 -0.213305 -8.289408 49.084165 0.124249 0.088121 0.000024 -0.586E-05 lgRho_cntr log_rel_run_E_err -11.4493571379702033 rel_E_err -3.5533898872288710D-12 png/grid_001880.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1024165504714084E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_c12_ag_o16_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_o16_ga_c12_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net 1890 9.005149 2.266E+05 -15.351253 8.744235 51.730810 0.000000 0.000000 0.000000 0.217139 -2.697826 3127 0 -1.8093E+00 9.005149 0.039326 3.568505 9.653824 -99.000000 51.730810 0.000000 0.775414 0.782861 0.200599 3 2.8747E+05 4.659608 6.454274 8.744232 0.372981 -8.270814 49.084165 0.115358 0.102443 0.000034 -0.714E-05 max increase log_rel_run_E_err -11.8586594896862856 rel_E_err 1.3846515950656512D-12 png/grid_001890.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0619809023642588E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 9.019956 2.295E+05 -13.410241 9.110869 51.730810 0.000000 0.000000 0.000000 0.217139 -2.636256 3129 0 -1.8293E+00 9.019956 0.028681 3.806454 9.838121 -99.000000 51.730810 0.000000 0.761866 0.782861 0.206606 3 2.8747E+05 4.711878 6.455199 9.110867 1.443483 -8.235760 49.084165 0.094078 0.136342 0.000064 -0.993E-05 lgRho_cntr log_rel_run_E_err -11.7187010636017721 rel_E_err -1.9111683137060803D-12 save LOGS/profile5.data for model 1900 save photos/x900 for model 1900 png/grid_001900.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9791998680847811E-002 1910 9.035455 2.326E+05 -12.677701 9.451618 51.730810 0.000000 0.000000 0.000000 0.217139 -2.572990 3115 0 -1.9680E+00 9.035455 0.017384 4.053456 10.027992 -99.000000 51.730810 0.000000 0.745318 0.782861 0.214043 3 2.8747E+05 4.766121 6.456169 9.451616 2.544890 -8.198397 49.084165 0.067580 0.177752 0.000114 -0.137E-04 lgRho_cntr log_rel_run_E_err -12.8619188048169999 rel_E_err -1.3742988882913931D-13 png/grid_001910.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.8782164148531591E-002 1920 9.050222 2.357E+05 -13.803907 9.734193 51.730810 0.000000 0.000000 0.000000 0.217139 -2.505584 3077 0 -2.1242E+00 9.050222 0.006341 4.290542 10.208790 -99.000000 51.730810 0.000000 0.730682 0.782861 0.221632 3 2.8747E+05 4.820874 6.457121 9.734191 3.565145 -8.162162 49.084165 0.043591 0.214380 0.000176 -0.185E-04 lgRho_cntr log_rel_run_E_err -11.8699910764805345 rel_E_err 1.3489906002365024D-12 png/grid_001920.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.7644400688527556E-002 1930 9.063816 2.387E+05 -14.111948 9.961708 51.730810 0.000000 0.000000 0.000000 0.217139 -2.433220 3040 0 -2.2850E+00 9.063816 -0.004059 4.510152 10.374894 -99.000000 51.730810 0.000000 0.720609 0.782861 0.228334 3 2.8747E+05 4.875705 6.458033 9.961706 4.465330 -8.128461 49.084165 0.026692 0.239596 0.000235 -0.247E-04 lgRho_cntr log_rel_run_E_err -11.4634686278045024 rel_E_err 3.4397855851380626D-12 png/grid_001930.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6421807273009386E-002 1940 9.076541 2.415E+05 -12.984452 10.152068 51.730810 0.000000 0.000000 0.000000 0.217139 -2.357918 3015 0 -2.4382E+00 9.076541 -0.013816 4.713978 10.527839 -99.000000 51.730810 0.000000 0.714451 0.782861 0.233998 3 2.8747E+05 4.930277 6.458915 10.152066 5.265218 -8.097250 49.084165 0.016145 0.255009 0.000282 -0.328E-04 lgRho_cntr log_rel_run_E_err -11.2750512976041914 rel_E_err 5.3082174140389238D-12 png/grid_001940.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5124713524426442E-002 1950 9.088822 2.443E+05 -12.596412 10.320358 51.730810 0.000000 0.000000 0.000000 0.217139 -2.281472 2984 0 -2.5823E+00 9.088822 -0.023139 4.906609 10.671310 -99.000000 51.730810 0.000000 0.710800 0.782861 0.238871 3 2.8747E+05 4.984570 6.459785 10.320357 5.997362 -8.067796 49.084165 0.009776 0.264142 0.000318 -0.435E-04 lgRho_cntr log_rel_run_E_err -11.0459015175797663 rel_E_err 8.9970157846573271D-12 save photos/x950 for model 1950 png/grid_001950.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.3741918161908017E-002 1960 9.100954 2.469E+05 -11.896006 10.475615 51.730810 0.000000 0.000000 0.000000 0.217139 -2.204898 2948 0 -2.7197E+00 9.100954 -0.032167 5.091691 10.808211 -99.000000 51.730810 0.000000 0.708638 0.782861 0.243199 3 2.8747E+05 5.038663 6.460657 10.475614 6.685573 -8.039643 49.079779 0.005933 0.269543 0.000346 -0.575E-04 lgRho_cntr log_rel_run_E_err -10.8729547827371551 rel_E_err 1.3398161772630058D-11 png/grid_001960.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2259693054200907E-002 1970 9.113102 2.496E+05 -11.889354 10.622975 51.730810 0.000000 0.000000 0.000000 0.217139 -2.128727 2909 0 -2.8526E+00 9.113102 -0.041050 5.271611 10.940439 -99.000000 51.730810 0.000000 0.707361 0.782861 0.247147 3 2.8747E+05 5.092625 6.461546 10.622973 7.344604 -8.012328 49.079779 0.003602 0.272722 0.000368 -0.760E-04 lgRho_cntr log_rel_run_E_err -10.7359873064920119 rel_E_err 1.8365920222592833D-11 png/grid_001970.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.0667625420746462E-002 1980 9.125364 2.523E+05 -11.816451 10.765520 51.730810 0.000000 0.000000 0.000000 0.217139 -2.053246 2867 0 -2.9826E+00 9.125364 -0.049937 5.447925 11.069230 -99.000000 51.730810 0.000000 0.706644 0.782861 0.250818 3 2.8747E+05 5.146501 6.462460 10.765518 7.983346 -7.985401 49.079779 0.002182 0.274496 0.000390 -0.101E-03 lgRho_cntr log_rel_run_E_err -10.6651870956073864 rel_E_err 2.1617870175577108D-11 png/grid_001980.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.8959064822444369E-002 1990 9.137797 2.550E+05 -12.012640 10.905347 51.730810 0.000000 0.000000 0.000000 0.217139 -1.978646 2837 0 -3.1106E+00 9.137797 -0.058644 5.621742 11.195457 -99.000000 51.730810 0.000000 0.706375 0.782861 0.254275 3 2.8747E+05 5.200318 6.463401 10.905345 8.607220 -7.959535 49.079779 0.001315 0.275147 0.000419 -0.132E-03 lgRho_cntr log_rel_run_E_err -10.5833810268802662 rel_E_err 2.6098705880011182D-11 png/grid_001990.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7130394970625697E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 9.150456 2.577E+05 -10.958125 11.044287 51.730810 0.000000 0.000000 0.000000 0.217139 -1.905158 2802 0 -3.2368E+00 9.150456 -0.067324 5.794001 11.319845 -99.000000 51.730810 0.000000 0.706749 0.782861 0.257543 3 2.8747E+05 5.254074 6.464380 11.044285 9.219677 -7.934259 49.079779 0.000787 0.274204 0.000479 -0.175E-03 lgRho_cntr log_rel_run_E_err -10.5372627611530394 rel_E_err 2.9022661653053635D-11 save LOGS/profile6.data for model 2000 save photos/2000 for model 2000 png/grid_002000.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.5179584343911723E-002 2010 9.163428 2.605E+05 -14.425743 11.184784 51.730810 0.000000 0.000000 0.000000 0.217139 -1.833314 2779 0 -3.3593E+00 9.163428 -0.076149 5.965852 11.443247 -99.000000 51.730810 0.000000 0.708698 0.782861 0.260604 4 2.8747E+05 5.307704 6.465406 11.184781 9.823232 -7.909045 49.079779 0.000464 0.269396 0.000658 -0.231E-03 lgRho_cntr log_rel_run_E_err -11.0074548066251037 rel_E_err 9.8298115826153900D-12 png/grid_002010.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.3102491168446593E-002 retry: check_lgL_power_photo_change hard limit 2014 2020 9.172750 2.625E+05 -10.635456 11.286725 51.730810 0.000000 0.000000 0.000000 0.217139 -1.784991 2756 1 -3.6868E+00 9.172750 -0.082368 6.086268 11.529365 -99.000000 51.730810 0.000000 0.712342 0.782861 0.262558 3 2.8747E+05 5.344846 6.466160 11.286722 10.239603 -7.891613 49.079779 0.000316 0.260497 0.001028 -0.282E-03lgL_power_phot log_rel_run_E_err -10.8673728846984012 rel_E_err 1.3571477008881089D-11 png/grid_002020.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.1573748823895386E-002 2030 9.180643 2.641E+05 -10.218761 11.374335 51.730810 0.000000 0.000000 0.000000 0.217139 -1.747372 2740 1 -3.7518E+00 9.180643 -0.087462 6.185931 11.600424 -99.000000 51.730810 0.000000 0.718380 0.782861 0.263982 3 2.8747E+05 5.374898 6.466798 11.374332 10.577384 -7.877539 49.079779 0.000227 0.245927 0.001828 -0.324E-03lgL_power_phot log_rel_run_E_err -10.8757552966518443 rel_E_err 1.3312042741281363D-11 png/grid_002030.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0266447645629248E-002 2040 9.188756 2.658E+05 -10.166089 11.466021 51.730810 0.000000 0.000000 0.000000 0.217139 -1.713210 2723 1 -3.8101E+00 9.188756 -0.092609 6.285868 11.671464 -99.000000 51.730810 0.000000 0.729316 0.782861 0.265144 3 2.8747E+05 5.403874 6.467463 11.466018 10.905475 -7.863503 49.079779 0.000159 0.220035 0.003921 -0.382E-03lgL_power_phot log_rel_run_E_err -10.8038504332572352 rel_E_err 1.5709037149556946D-11 png/grid_002040.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.8920908842060234E-002 2050 9.197125 2.675E+05 -9.921420 11.562564 51.730810 0.000000 0.000000 0.000000 0.217139 -1.683823 2704 1 -3.8571E+00 9.197125 -0.097824 6.386300 11.742643 -99.000000 51.730810 0.000000 0.747491 0.782861 0.265976 3 2.8747E+05 5.431266 6.468120 11.562561 11.216989 -7.849308 49.079779 0.000107 0.178458 0.009361 -0.422E-03lgL_power_phot log_rel_run_E_err -10.7599366264567795 rel_E_err 1.7380544323206862D-11 save photos/x050 for model 2050 png/grid_002050.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.7537445232496767E-002 2060 9.205744 2.692E+05 -9.806861 11.662749 51.730810 0.000000 0.000000 0.000000 0.217139 -1.658617 2689 1 -3.8859E+00 9.205744 -0.103161 6.488304 11.814715 -99.000000 51.730810 0.000000 0.773469 0.782861 0.266568 3 2.8747E+05 5.457309 6.468787 11.662746 11.502476 -7.834862 49.079779 0.000068 0.122482 0.021781 -0.459E-03lgL_power_phot log_rel_run_E_err -10.6354263127129851 rel_E_err 2.3151209621572488D-11 png/grid_002060.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.6104537015418002E-002 2070 9.215546 2.713E+05 -12.891162 11.773677 51.730810 0.000000 0.000000 0.000000 0.217139 -1.628932 2664 1 -3.7595E+00 9.215546 -0.109560 6.606838 11.898182 -99.000000 51.730810 0.000000 0.805459 0.782861 0.267462 4 2.8747E+05 5.487352 6.469573 11.773674 11.777579 -7.817621 49.079779 0.000035 0.060239 0.045812 -0.521E-03lgL_power_phot log_rel_run_E_err -10.9992293272030128 rel_E_err 1.0017761151212293D-11 png/grid_002070.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.4410034023643759E-002 2080 9.228422 2.743E+05 -11.476206 11.913273 51.730810 0.000000 0.000000 0.000000 0.217139 -1.573512 2645 1 -3.7884E+00 9.228422 -0.118476 6.771628 12.013581 -99.000000 51.730810 0.000000 0.833277 0.782861 0.269873 4 2.8747E+05 5.533893 6.470669 11.913269 12.059818 -7.793877 49.079779 0.000009 0.014341 0.076678 -0.641E-03 lgRho_cntr log_rel_run_E_err -11.0064862040825435 rel_E_err 9.8517593767562665D-12 png/grid_002080.png/png Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.2015879000363817E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2088 2090 9.239197 2.758E+05 -10.723212 12.029114 51.730810 0.000000 0.000000 0.000000 0.217139 -1.515128 2667 1 -5.4199E+00 9.239197 -0.127299 6.913002 12.111989 -99.000000 51.730810 0.000000 0.841940 0.782861 0.272621 5 2.8747E+05 5.578046 6.462363 12.029111 12.239501 -7.435512 49.079779 0.000002 0.002355 0.088840 0.239E-02 max increase log_rel_run_E_err -8.2464660886258603 rel_E_err 1.0409961440882700D-11 png/grid_002090.png/png check gamma integral 9.9393688226557617E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.240443 2.745E+05 -10.438085 12.044041 51.730810 0.000000 0.000000 0.000000 0.217139 -1.508262 2787 1 -4.8001E+00 9.240443 -0.119384 6.929302 12.123319 -99.000000 51.730810 0.000000 0.842376 0.782861 0.272935 5 2.8747E+05 5.583203 6.470241 12.044038 12.258877 -7.479657 49.079779 0.000001 0.001786 0.089497 0.484E-02 max_dt log_rel_run_E_err -8.2389066208668638 rel_E_err 1.0045572191780030D-11 save LOGS/profile7.data for model 2100 save photos/x100 for model 2100 png/grid_002100.png/png check gamma integral 9.6989475647160997E-003 2110 9.242348 2.747E+05 -11.736575 12.065466 51.730810 0.000000 0.000000 0.000000 0.217139 -1.497644 2941 1 -4.8001E+00 9.242348 -0.119063 6.953835 12.140364 -99.000000 51.730810 0.000000 0.842889 0.782861 0.273421 5 2.8747E+05 5.591141 6.472023 12.065462 12.285996 -7.485715 49.079779 0.000001 0.001119 0.090283 -0.932E-03 max_dt log_rel_run_E_err -8.2320553120925926 rel_E_err 9.5268919594633767D-12 png/grid_002110.png/png check gamma integral 9.3369299438630978E-003 2120 9.244327 2.751E+05 -13.275875 12.087125 51.730810 0.000000 0.000000 0.000000 0.217139 -1.486505 3104 1 -4.8001E+00 9.244327 -0.120207 6.979196 12.157978 -99.000000 51.730810 0.000000 0.843252 0.782861 0.273931 5 2.8747E+05 5.599436 6.472350 12.087121 12.312500 -7.482123 49.079779 0.000001 0.000644 0.090855 -0.124E-02 max_dt log_rel_run_E_err -8.2256879442853421 rel_E_err 8.8540830047745563D-12 png/grid_002120.png/png check gamma integral 8.9624458708696276E-003 2130 9.246397 2.756E+05 -11.392800 12.109289 51.730810 0.000000 0.000000 0.000000 0.217139 -1.474806 3263 1 -4.8001E+00 9.246397 -0.121525 7.005532 12.176266 -99.000000 51.730810 0.000000 0.843486 0.782861 0.274467 5 2.8747E+05 5.608134 6.472597 12.109286 12.338744 -7.477633 49.079779 0.000000 0.000334 0.091241 -0.136E-02 max_dt log_rel_run_E_err -8.2197496832240518 rel_E_err 8.5205173576659414D-12 png/grid_002130.png/png check gamma integral 8.5733005898071830E-003 2140 9.248570 2.761E+05 -11.650160 12.132127 51.730810 0.000000 0.000000 0.000000 0.217139 -1.462518 3398 1 -4.8001E+00 9.248570 -0.122939 7.033006 12.195317 -99.000000 51.730810 0.000000 0.843616 0.782861 0.275028 5 2.8747E+05 5.617269 6.472829 12.132123 12.364959 -7.472721 49.079779 0.000000 0.000153 0.091479 -0.143E-02 max_dt log_rel_run_E_err -8.2142099916461753 rel_E_err 8.3376066376044175D-12 png/grid_002140.png/png check gamma integral 8.1676967194873953E-003 2150 9.250873 2.766E+05 -13.756307 12.156212 51.730810 0.000000 0.000000 0.000000 0.217139 -1.449569 3022 1 -4.8001E+00 9.250873 -0.124603 7.061855 12.215337 -99.000000 51.730810 0.000000 0.843671 0.782861 0.275615 5 2.8747E+05 5.626920 6.473063 12.156209 12.391882 -7.466828 49.079779 0.000000 0.000061 0.091615 -0.164E-02 max_dt log_rel_run_E_err -8.2096880939928010 rel_E_err 6.0372178686841472D-12 save photos/x150 for model 2150 png/grid_002150.png/png check gamma integral 7.7413465469540581E-003 2160 9.253316 2.772E+05 -11.616341 12.181530 51.730810 0.000000 0.000000 0.000000 0.217139 -1.435931 2837 1 -4.8001E+00 9.253316 -0.126315 7.092188 12.236392 -99.000000 51.730810 0.000000 0.843679 0.782861 0.276230 5 2.8747E+05 5.637119 6.473312 12.181527 12.419518 -7.460787 49.079779 0.000000 0.000023 0.091692 -0.175E-02 max_dt log_rel_run_E_err -8.2060413020807417 rel_E_err 5.6340428398830311D-12 png/grid_002160.png/png check gamma integral 7.2929883018498813E-003 2170 9.255922 2.778E+05 -11.306188 12.208378 51.730810 0.000000 0.000000 0.000000 0.217139 -1.421537 2693 1 -4.8001E+00 9.255922 -0.127949 7.124193 12.258634 -99.000000 51.730810 0.000000 0.843660 0.782861 0.276875 5 2.8747E+05 5.647933 6.473566 12.208374 12.448248 -7.455068 49.053519 0.000000 0.000011 0.091747 -0.176E-02 max_dt log_rel_run_E_err -8.2027775285835336 rel_E_err 4.8424150558389632D-12 png/grid_002170.png/png check gamma integral 6.8195364824539268E-003 2180 9.258706 2.784E+05 -10.794782 12.236808 51.730810 0.000000 0.000000 0.000000 0.217139 -1.406327 2608 1 -4.8001E+00 9.258706 -0.129755 7.158135 12.282171 -99.000000 51.730810 0.000000 0.843626 0.782861 0.277552 5 2.8747E+05 5.659416 6.473840 12.236805 12.478142 -7.448713 49.053519 0.000000 0.000008 0.091802 -0.181E-02 max_dt log_rel_run_E_err -8.1998786977050102 rel_E_err 4.4173750981304485D-12 png/grid_002180.png/png check gamma integral 6.3190129591916720E-003 2190 9.261696 2.791E+05 -10.497934 12.267191 51.730810 0.000000 0.000000 0.000000 0.217139 -1.390191 2603 1 -4.8001E+00 9.261696 -0.131656 7.194350 12.307214 -99.000000 51.730810 0.000000 0.843580 0.782861 0.278266 5 2.8747E+05 5.671666 6.474135 12.267187 12.509635 -7.442032 49.053519 0.000000 0.000007 0.091870 -0.192E-02 max_dt log_rel_run_E_err -8.1970462633936449 rel_E_err 4.5245627191437622D-12 png/grid_002190.png/png check gamma integral 5.7872327843632044E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.264919 2.798E+05 -10.080787 12.299772 51.730810 0.000000 0.000000 0.000000 0.217139 -1.373015 2601 1 -4.8001E+00 9.264919 -0.133685 7.233043 12.333962 -99.000000 51.730810 0.000000 0.843519 0.782861 0.279021 5 2.8747E+05 5.684782 6.474454 12.299768 12.542985 -7.434906 49.053519 0.000000 0.000007 0.091958 -0.205E-02 max_dt log_rel_run_E_err -8.1942192292512708 rel_E_err 4.5472259447965948D-12 save LOGS/profile8.data for model 2200 save photos/x200 for model 2200 png/grid_002200.png/png check gamma integral 5.2204521258072348E-003 2210 9.268412 2.805E+05 -10.096918 12.334889 51.730810 0.000000 0.000000 0.000000 0.217139 -1.354655 2602 1 -4.8001E+00 9.268412 -0.135864 7.274588 12.362673 -99.000000 51.730810 0.000000 0.843436 0.782861 0.279824 5 2.8747E+05 5.698891 6.474801 12.334885 12.578539 -7.427248 49.049212 0.000000 0.000007 0.092077 -0.221E-02 max_dt log_rel_run_E_err -8.1913446547478994 rel_E_err 4.6257174628116899D-12 png/grid_002210.png/png check gamma integral 4.6139236431726087E-003 2220 9.272219 2.813E+05 -9.457527 12.372955 51.730810 0.000000 0.000000 0.000000 0.217139 -1.334936 2603 1 -4.8001E+00 9.272219 -0.138220 7.319440 12.393661 -99.000000 51.730810 0.000000 0.843321 0.782861 0.280684 5 2.8747E+05 5.714146 6.475176 12.372951 12.616708 -7.418962 49.049212 0.000000 0.000007 0.092242 -0.239E-02 max_dt log_rel_run_E_err -8.1884245170435292 rel_E_err 4.7567592951306971D-12 png/grid_002220.png/png check gamma integral 3.9619240118834581E-003 2230 9.276394 2.822E+05 -8.683217 12.414493 51.730810 0.000000 0.000000 0.000000 0.217139 -1.313647 2604 1 -4.8001E+00 9.276394 -0.140776 7.368172 12.427323 -99.000000 51.730810 0.000000 0.843157 0.782861 0.281610 5 2.8747E+05 5.730740 6.475590 12.414489 12.658005 -7.409971 49.049212 0.000000 0.000006 0.092478 -0.259E-02 max_dt log_rel_run_E_err -8.1853991212563439 rel_E_err 4.7854287178671390D-12 png/grid_002230.png/png check gamma integral 3.2573836001524620E-003 2240 9.281011 2.832E+05 -8.086191 12.460173 51.730810 0.000000 0.000000 0.000000 0.217139 -1.290523 2604 1 -4.8001E+00 9.281011 -0.143572 7.421512 12.464168 -99.000000 51.730810 0.000000 0.842914 0.782861 0.282620 5 2.8747E+05 5.748918 6.476050 12.460169 12.703070 -7.400137 49.049212 0.000000 0.000006 0.092825 -0.284E-02 max_dt log_rel_run_E_err -8.1821355687522246 rel_E_err 5.4024742916735731D-12 png/grid_002240.png/png check gamma integral 2.4915313281952968E-003 2250 9.286165 2.843E+05 -7.134925 12.510851 51.730810 0.000000 0.000000 0.000000 0.217139 -1.265243 2604 1 -4.8001E+00 9.286165 -0.146656 7.480398 12.504853 -99.000000 51.730810 0.000000 0.842542 0.782861 0.283734 5 2.8747E+05 5.768989 6.476564 12.510847 12.752705 -7.389280 49.049212 0.000000 0.000006 0.093358 -0.314E-02 max_dt log_rel_run_E_err -8.1771926377005819 rel_E_err 1.1600082888834240D-11 save photos/x250 for model 2250 png/grid_002250.png/png check gamma integral 1.6533808186001131E-003 reached high velocities 0.39198985316371943 stopping in at least 1486.0921582506305 seconds 2260 9.292056 2.855E+05 -5.224527 12.567285 51.730810 0.000000 0.000000 0.000000 0.217139 -1.236982 2604 1 -4.7210E+00 9.292056 -0.150130 7.546799 12.550786 -99.000000 51.730810 0.000000 0.841925 0.782861 0.285015 5 2.8747E+05 5.791673 6.477162 12.567281 12.807309 -7.377051 49.049212 0.000000 0.000006 0.094242 -0.320E-02 max increase log_rel_run_E_err -8.1289882192289049 rel_E_err 1.1154019983313129D-10 png/grid_002260.png/png check gamma integral 7.1822523690194030E-004 save LOGS/gamma1_prof001.data for model 2264 retry: check_lgL_power_photo_change hard limit 2268 2270 9.299157 2.869E+05 -2.030757 12.505414 51.730810 0.000000 0.000000 0.000000 0.217139 -1.194994 2604 2 -4.6458E+00 9.299157 -0.153646 7.613455 12.600641 -99.000000 51.730810 0.000000 0.839381 0.782861 0.287873 5 2.8747E+05 5.822452 6.478401 12.505408 12.712430 -7.365949 49.049212 0.000000 0.000005 0.097879 0.159E-01 max increase log_rel_run_E_err -8.0901909348930854 rel_E_err 8.8263946261121665D-11 png/grid_002270.png/png check gamma integral -2.6883609805311960E-004 solver rejected trial model s% model_number 2271 s% solver_call_number 696 nz 2604 s% num_retries 2 dt 8.5603817686329216D+02 log dt/secyer -4.5666108336798636D+00 retry: max correction jumped -- give up in solver 2271 solver rejected trial model s% model_number 2272 s% solver_call_number 698 nz 2604 s% num_retries 3 dt 3.4241527074531689D+02 log dt/secyer -4.9645508423519011D+00 retry: max correction jumped -- give up in solver 2272 hydro_solver_step returned ierr -1 s% model_number 2273 nz 2604 s% num_retries 4 retry: some xa < min_xa_hard_limit 2273 retry: check_lgL_power_photo_change hard limit 2274 retry: check_lgL_power_photo_change hard limit 2276 retry: check_lgL_power_photo_change hard limit 2278 2280 9.296988 2.856E+05 -2.191560 12.420684 51.730810 0.000000 0.000000 0.000000 0.217139 -1.199599 2604 8 -6.1596E+00 9.296988 -0.151762 7.582067 12.581481 -99.000000 51.730810 0.000000 0.839227 0.782861 0.288062 5 2.8747E+05 5.816587 6.474298 12.420678 12.612713 -7.371042 49.049212 0.000000 0.000006 0.098098 -0.160E+00lgL_power_phot log_rel_run_E_err -8.0452132659386439 rel_E_err 4.9873341480327095D-12 png/grid_002280.png/png check gamma integral 1.2561668194396058E-004 retry: check_lgL_power_photo_change hard limit 2282 2290 9.307559 2.870E+05 -2.087655 12.758496 51.730810 0.000000 0.000000 0.000000 0.217139 -1.168155 2606 9 -6.4986E+00 9.307559 -0.158175 7.714929 12.669449 -99.000000 51.730810 0.000000 0.839183 0.782861 0.288242 5 2.8747E+05 5.849051 6.469644 12.758492 13.012314 -7.343850 49.049212 0.000000 0.000005 0.098162 -0.367E+00lgL_power_phot log_rel_run_E_err -8.0428891586291922 rel_E_err 4.8174243164756319D-12 png/grid_002290.png/png check gamma integral -1.6126539165589020E-003 retry: check_lgL_power_photo_change hard limit 2291 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.318634 2.878E+05 -1.946733 13.121916 51.730810 0.000000 0.000000 0.000000 0.217139 -1.135171 2610 10 -6.7663E+00 9.318634 -0.163899 7.850200 12.760318 -99.000000 51.730810 0.000000 0.839128 0.782861 0.288443 5 2.8747E+05 5.883107 6.463372 13.121914 13.420343 -7.319035 49.049212 0.000000 0.000005 0.098241 -0.582E+00lgL_power_phot log_rel_run_E_err -8.0404608322628484 rel_E_err 4.9351030129210143D-12 save LOGS/profile9.data for model 2300 save photos/x300 for model 2300 png/grid_002300.png/png check gamma integral -3.3295741187340175E-003 retry: check_lgL_power_photo_change hard limit 2303 2310 9.329376 2.883E+05 -1.794985 13.480054 51.730810 0.000000 0.000000 0.000000 0.217139 -1.103093 2612 11 -7.0235E+00 9.329376 -0.168718 7.977803 12.847204 -99.000000 51.730810 0.000000 0.839048 0.782861 0.288660 5 2.8747E+05 5.916205 6.456717 13.480052 13.804027 -7.298069 49.049212 0.000000 0.000004 0.098357 -0.793E+00lgL_power_phot log_rel_run_E_err -8.0378068321650851 rel_E_err 5.1923814586676809D-12 png/grid_002310.png/png check gamma integral -4.8846882894210139E-003 2320 9.341446 2.885E+05 -1.641348 13.882491 51.730810 0.000000 0.000000 0.000000 0.217139 -1.067016 2613 11 -7.1409E+00 9.341446 -0.173469 8.117449 12.943442 -99.000000 51.730810 0.000000 0.838893 0.782861 0.288937 5 2.8747E+05 5.953448 6.448430 13.882490 14.217694 -7.277217 49.049212 0.000000 0.000004 0.098580 -0.103E+01lgL_power_phot log_rel_run_E_err -8.0349974648067466 rel_E_err 5.0071401962223333D-12 png/grid_002320.png/png check gamma integral -6.4973445639734326E-003 2330 9.354382 2.885E+05 -1.553814 14.301721 51.730810 0.000000 0.000000 0.000000 0.217139 -1.028436 2615 11 -7.2634E+00 9.354382 -0.177936 8.263888 13.045088 -99.000000 51.730810 0.000000 0.838568 0.782861 0.289286 5 2.8747E+05 5.993379 6.439609 14.301720 14.633204 -7.255280 49.049212 0.000000 0.000004 0.099051 -0.127E+01lgL_power_phot log_rel_run_E_err -8.0317019386519757 rel_E_err 5.3446430172069160D-12 png/grid_002330.png/png check gamma integral -8.0648827905144150E-003 2340 9.367796 2.884E+05 -1.539615 14.703510 51.730810 0.000000 0.000000 0.000000 0.217139 -0.988809 2618 11 -7.3669E+00 9.367796 -0.182048 8.413643 13.149028 -99.000000 51.730810 0.000000 0.837842 0.782861 0.289746 4 2.8747E+05 6.034688 6.430525 14.703510 15.019469 -7.237021 49.049212 0.000001 0.000004 0.100105 -0.152E+01lgL_power_phot log_rel_run_E_err -8.0275417240343128 rel_E_err 5.5250362529919178D-12 png/grid_002340.png/png check gamma integral -9.5164451906452324E-003 2350 9.381959 2.881E+05 -1.379722 15.066100 51.730810 0.000000 0.000000 0.000000 0.217139 -0.948080 2619 11 -7.4366E+00 9.381959 -0.185993 8.571586 13.257273 -99.000000 51.730810 0.000000 0.836056 0.782861 0.290457 3 2.8747E+05 6.077894 6.421123 15.066099 15.357742 -7.221146 49.049212 0.000001 0.000003 0.102709 -0.178E+01lgL_power_phot log_rel_run_E_err -8.0218020237047867 rel_E_err 5.0474423162710206D-12 save photos/x350 for model 2350 png/grid_002350.png/png check gamma integral -1.0862703078342407E-002 2360 9.397834 2.878E+05 -1.050370 15.382280 51.730810 0.000000 0.000000 0.000000 0.217139 -0.905831 2622 11 -7.4642E+00 9.397834 -0.190091 8.751104 13.376529 -99.000000 51.730810 0.000000 0.830827 0.782861 0.291940 4 2.8747E+05 6.124910 6.410767 15.382280 15.637456 -7.205471 49.049212 0.000002 0.000004 0.110364 -0.208E+01lgL_power_phot log_rel_run_E_err -8.0121415474672464 rel_E_err 5.9421258217580525D-12 png/grid_002360.png/png check gamma integral -1.2148497495239803E-002 2370 9.419340 2.873E+05 -0.568383 15.698747 51.730810 0.000000 0.000000 0.000000 0.217139 -0.864837 2632 11 -7.3981E+00 9.419340 -0.195262 9.000278 13.532463 -99.000000 51.730810 0.000000 0.806748 0.782861 0.297679 5 2.8747E+05 6.181388 6.397355 15.698747 15.874332 -7.186275 49.049212 0.000004 0.000004 0.145316 -0.248E+01 max increase log_rel_run_E_err -7.9934615003324900 rel_E_err 6.9619503836882480D-12 png/grid_002370.png/png check gamma integral -1.3508101601747919E-002 2380 9.443595 2.867E+05 -0.046071 15.991043 51.730810 0.000000 0.000000 0.000000 0.217139 -0.873119 2637 11 -7.6102E+00 9.443595 -0.200796 9.289338 13.697622 -99.000000 51.730810 0.000000 0.704226 0.782861 0.323809 5 2.8747E+05 6.219398 6.382628 15.991043 16.033994 -7.166306 49.049212 0.000010 0.000017 0.237997 -0.295E+01 XO_cntr log_rel_run_E_err -7.9599930778833663 rel_E_err 7.5088067093890213D-12 png/grid_002380.png/png check gamma integral -1.4553812719287426E-002 2390 9.455808 2.863E+05 0.195363 16.124252 51.730810 0.000000 0.000000 0.000000 0.217139 -0.906349 2639 11 -7.8937E+00 9.455808 -0.203746 9.448280 13.780317 -99.000000 51.730810 0.000000 0.588849 0.782861 0.359229 4 2.8747E+05 6.223563 6.374505 16.124252 16.132963 -7.155921 49.049212 0.000014 0.000019 0.273620 -0.321E+01 XO_cntr log_rel_run_E_err -7.9324137907127374 rel_E_err 8.0348800616820390D-12 png/grid_002390.png/png check gamma integral -1.4941927406371054E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.463540 2.860E+05 0.338308 16.203604 51.730810 0.000000 0.000000 0.000000 0.217139 -0.937944 2643 11 -7.9829E+00 9.463540 -0.205889 9.563727 13.835923 -99.000000 51.730810 0.000000 0.484409 0.782861 0.396636 4 2.8747E+05 6.220019 6.368420 16.203604 16.239037 -7.148509 49.049212 0.000018 0.000018 0.313435 -0.340E+01 XO_cntr log_rel_run_E_err -7.9069486849219297 rel_E_err 8.8009944753335923D-12 save LOGS/profile10.data for model 2400 save photos/x400 for model 2400 png/grid_002400.png/png check gamma integral -1.5163262740670851E-002 2410 9.470107 2.857E+05 0.448966 16.265684 51.730810 0.000000 0.000000 0.000000 0.217139 -0.968989 2645 11 -7.9648E+00 9.470107 -0.208158 9.683960 13.889042 -99.000000 51.730810 0.000000 0.375276 0.782861 0.442613 4 2.8747E+05 6.213943 6.361777 16.265684 16.380343 -7.140794 49.049212 0.000021 0.000016 0.351542 -0.361E+01 dX_nuc o16 log_rel_run_E_err -7.8758466304359960 rel_E_err 9.7241084455360291D-12 png/grid_002410.png/png check gamma integral -1.5354362495448460E-002 2420 9.475791 2.852E+05 0.515493 16.308379 51.730810 0.000000 0.000000 0.000000 0.217139 -0.996663 2651 11 -7.7831E+00 9.475791 -0.210895 9.822853 13.943484 -99.000000 51.730810 0.000000 0.268035 0.782861 0.497386 4 2.8747E+05 6.207408 6.353463 16.308379 16.562008 -7.131682 49.049212 0.000022 0.000013 0.380456 -0.387E+01 dX_nuc o16 log_rel_run_E_err -7.8339506624928132 rel_E_err 1.0525986619220060D-11 png/grid_002420.png/png check gamma integral -1.5540336507311115E-002 2430 9.479917 2.846E+05 0.482506 16.317561 51.730810 0.000000 0.000000 0.000000 0.217139 -1.017176 2659 11 -7.8685E+00 9.479917 -0.214113 9.970683 13.992441 -99.000000 51.730810 0.000000 0.182513 0.782861 0.551471 4 2.8747E+05 6.201860 6.343233 16.317561 16.743517 -7.121266 49.049212 0.000021 0.000010 0.392344 -0.419E+01 dX_nuc o16 log_rel_run_E_err -7.7808062799123530 rel_E_err 1.2118497621252014D-11 png/grid_002430.png/png check gamma integral -1.5715813221193326E-002 2440 9.482019 2.836E+05 0.165157 16.266379 51.730810 0.000000 0.000000 0.000000 0.217139 -1.035349 2669 11 -7.7545E+00 9.482019 -0.218550 10.128138 14.031624 -99.000000 51.730810 0.000001 0.116815 0.782861 0.603355 4 2.8747E+05 6.194413 6.328451 16.266378 16.882095 -7.107469 49.049212 0.000017 0.000007 0.388258 -0.465E+01 dX_nuc o16 log_rel_run_E_err -7.7083354058506472 rel_E_err 1.4175785470442953D-11 png/grid_002440.png/png check gamma integral -1.5924269979048326E-002 2450 9.476755 2.814E+05 -1.514828 15.994328 51.730810 0.000000 0.000000 0.000000 0.217139 -1.069922 2669 11 -7.4423E+00 9.476755 -0.226546 10.222458 14.020479 -99.000000 51.730810 0.000000 0.072473 0.782861 0.646122 5 2.8747E+05 6.167528 6.298872 15.994327 16.758071 -7.084423 49.049212 0.000011 0.000005 0.374603 -0.554E+01 dX_nuc o16 log_rel_run_E_err -7.6113153454752274 rel_E_err 1.8124332901503027D-11 save photos/x450 for model 2450 png/grid_002450.png/png check gamma integral -1.6347491220082618E-002 2460 9.459376 2.786E+05 -3.382057 15.432848 51.730810 0.000000 0.000000 0.000000 0.217139 -1.133583 2657 11 -7.7144E+00 9.459376 -0.235403 10.082901 13.907057 -99.000000 51.730810 0.000000 0.061535 0.782861 0.655793 5 2.8747E+05 6.108279 6.263847 15.432846 16.132249 -7.061444 49.084341 0.000007 0.000003 0.371182 -0.663E+01 lgRho_cntr log_rel_run_E_err -7.5675648825702435 rel_E_err 1.9908597044068141D-11 png/grid_002460.png/png check gamma integral -1.6872307206639545E-002 2470 9.442871 2.766E+05 -4.167673 14.944757 51.730810 0.000000 0.000000 0.000000 0.217139 -1.191749 2649 11 -7.8751E+00 9.442871 -0.241163 9.904187 13.790755 -99.000000 51.730810 0.000000 0.060178 0.782861 0.654956 8 2.8747E+05 6.053855 6.240085 14.944754 15.504687 -7.047864 49.084341 0.000005 0.000002 0.371575 -0.739E+01 lgRho_cntr log_rel_run_E_err -6.7106214828005504 rel_E_err 8.2792973268264463D-10 png/grid_002470.png/png check gamma integral -1.7066401994346062E-002 2480 9.426896 2.751E+05 -4.724569 14.494335 51.730810 0.000000 0.000000 0.000000 0.217139 -1.248665 2636 11 -7.9679E+00 9.426896 -0.245913 9.724553 13.675512 -99.000000 51.730810 0.000000 0.059910 0.782861 0.652932 7 2.8747E+05 6.001267 6.220570 14.494328 14.881586 -7.037367 49.084341 0.000004 0.000002 0.371828 -0.804E+01 lgRho_cntr log_rel_run_E_err -6.2269641067082029 rel_E_err 9.0288507895092958D-11 png/grid_002480.png/png check gamma integral -1.6997887688938076E-002 2490 9.411195 2.737E+05 -5.206822 14.070671 51.730810 0.000000 0.000000 0.000000 0.217139 -1.305435 2611 11 -8.0309E+00 9.411195 -0.250191 9.546871 13.560216 -99.000000 51.730810 0.000000 0.059850 0.782861 0.650671 8 2.8747E+05 5.949501 6.203382 14.070658 14.257520 -7.028329 49.084341 0.000003 0.000001 0.371885 -0.863E+01 lgRho_cntr log_rel_run_E_err -6.2257331621707941 rel_E_err 5.1850484409225755D-11 png/grid_002490.png/png check gamma integral -1.6669805236528848E-002 residual_norm > tol_residual_norm 2493 2.4387051606140910D+00 9.9999999999999995D-07 max_residual > tol_max_residual 2493 1.9363329016118185D+05 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 2493 8.0732820932606431D-01 3.7159608265197604D-02 1.2386536088399201D-01 solver rejected trial model s% model_number 2493 s% solver_call_number 927 nz 2605 s% num_retries 11 dt 2.8379428347819330D-01 log dt/secyer -8.0461003239513698D+00 retry: max corr, avg+max resid -- give up in solver 2493 residual_norm > tol_residual_norm 2494 3.5758477668770659D-05 9.9999999999999995D-07 max_residual > tol_max_residual 2494 1.4843930993017813D+00 1.0000000000000000D-03 solver rejected trial model s% model_number 2494 s% solver_call_number 929 nz 2607 s% num_retries 12 dt 1.7027657008691596D-01 log dt/secyer -8.2679490735677259D+00 retry: avg+max resid -- give up in solver 2494 write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin write /n/netscratch/conroy_lab/Lab/ebauer/mesa-git-tests/tmp.SyXWELQmEO/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin residual_norm > tol_residual_norm 2496 2.0701510927026729D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2496 1.7240756711190661D+03 1.0000000000000000D-03 solver rejected trial model s% model_number 2496 s% solver_call_number 932 nz 2607 s% num_retries 13 dt 1.2259913046257948D-01 log dt/secyer -8.4106165771364587D+00 retry: avg+max resid -- give up in solver 2496 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.403748 2.731E+05 -5.427196 13.875928 51.730810 0.000000 0.000000 0.000000 0.217139 -1.332624 2607 14 -8.3949E+00 9.403748 -0.252138 9.462553 13.504836 -99.000000 51.730810 0.000000 0.059840 0.782861 0.649568 12 2.8747E+05 5.924927 6.195403 13.875911 13.958534 -7.024345 49.084341 0.000002 0.000001 0.371889 -0.891E+01 max increase log_rel_run_E_err -6.2254234062791722 rel_E_err 1.9205916853766151D-11 save LOGS/profile11.data for model 2500 save photos/x500 for model 2500 png/grid_002500.png/png k, q, energy_removed_layers before adjustment is 199 0.99999739243233676 1.5712107372708507E+047 k, q, energy_removed_layers after adjustment is 212 0.99998772842591332 2.6368667318589915E+047 Layers above q= 0.99998772842591332 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10403.199218750000 max vel inside fraction of cutoff 1651.7424786851043 max c/cs inside fraction of cutoff 0.58767737151090482 average v/vesc outside cutoff 0.94250243663413635 Kinetic plus potential energy outside cutoff 2.6368667318589915E+047 mass inside cutoff 212 51.730174942547116 relax counter 0 log max v [km/s]= 4.0697979424561694 check gamma integral -1.6418590135509514E-002 residual_norm > tol_residual_norm 2501 5.0913510519948919D-03 9.9999999999999995D-07 max_residual > tol_max_residual 2501 5.4863278821225003D+02 1.0000000000000000D-03 solver rejected trial model s% model_number 2501 s% solver_call_number 938 nz 2607 s% num_retries 14 dt 1.5253293415632285D-01 log dt/secyer -8.3157403425623144D+00 retry: avg+max resid -- give up in solver 2501 residual_norm > tol_residual_norm 2504 4.1185711055402585D-03 9.9999999999999995D-07 max_residual > tol_max_residual 2504 4.6872822362234518D+02 1.0000000000000000D-03 solver rejected trial model s% model_number 2504 s% solver_call_number 942 nz 2607 s% num_retries 15 dt 1.3178845511106294D-01 log dt/secyer -8.3792266000834221D+00 retry: avg+max resid -- give up in solver 2504 residual_norm > tol_residual_norm 2507 2.4479332215750832D-01 9.9999999999999995D-07 max_residual > tol_max_residual 2507 1.4076450709966643D+04 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2507 1.3744125227946880D-04 9.9294968501275165D-05 3.3098322833758388D-02 max_abs_correction > tol_max_correction*coeff 2507 3.0213011245997561D+00 9.9294968501275165D-03 3.3098322833758388D-02 solver rejected trial model s% model_number 2507 s% solver_call_number 946 nz 2607 s% num_retries 16 dt 1.1386522521595836D-01 log dt/secyer -8.4427128576045281D+00 retry: avg+max corr+resid -- give up in solver 2507 2510 9.399086 2.726E+05 -5.563702 13.755866 51.730810 0.000000 0.000000 0.000000 0.217139 -1.349724 2607 17 -8.5062E+00 9.399086 -0.253339 9.409727 13.469917 -99.000000 51.730810 0.000000 0.059836 0.782861 0.648873 21 2.8747E+05 5.909536 6.190400 13.755847 13.770652 -7.021930 49.084341 0.000002 0.000001 0.371889 -0.909E+01 max increase log_rel_run_E_err -6.2251778096217993 rel_E_err 1.7320603252651165D-11 png/grid_002510.png/png k, q, energy_removed_layers before adjustment is 201 0.99999638071146946 2.1527991534395635E+047 k, q, energy_removed_layers after adjustment is 214 0.99998568607938154 3.1153188877027028E+047 Layers above q= 0.99998568607938154 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10404.021484375000 max vel inside fraction of cutoff 1706.7771479817909 max c/cs inside fraction of cutoff 0.61144579929628240 average v/vesc outside cutoff 0.99281641334281101 Kinetic plus potential energy outside cutoff 3.1153188877027028E+047 mass inside cutoff 214 51.730069290307213 relax counter 0 log max v [km/s]= 4.1789910258951579 check gamma integral -1.6228675773235321E-002 residual_norm > tol_residual_norm 2511 2.2406974914976716D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2511 1.4647537859587899D+03 1.0000000000000000D-03 solver rejected trial model s% model_number 2511 s% solver_call_number 951 nz 2607 s% num_retries 17 dt 1.1805546550390562D-01 log dt/secyer -8.4270178690780106D+00 retry: avg+max resid -- give up in solver 2511 hydro_solver_step returned ierr -1 s% model_number 2517 nz 2618 s% num_retries 18 retry: adjust_correction failed in eval_equations -- give up in solver 2517 residual_norm > tol_residual_norm 2520 1.9902661693315910D+01 9.9999999999999995D-07 max_residual > tol_max_residual 2520 1.4487664535037244D+06 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2520 2.1166512995936671D-04 9.0041132004679717D-05 3.0013710668226570D-02 max_abs_correction > tol_max_correction*coeff 2520 3.3318106216657526D+00 9.0041132004679714D-03 3.0013710668226570D-02 solver rejected trial model s% model_number 2520 s% solver_call_number 962 nz 2607 s% num_retries 19 dt 1.5228506783831647D-01 log dt/secyer -8.3164466459773490D+00 retry: avg+max corr+resid -- give up in solver 2520 2520 9.393348 2.722E+05 -5.730677 13.609970 51.730810 0.000000 0.000000 0.000000 0.217139 -1.370858 2607 20 -8.6175E+00 9.393348 -0.254801 9.344667 13.426680 -99.000000 51.730810 0.000000 0.059833 0.782861 0.648011 5 2.8747E+05 5.890586 6.184372 13.609947 13.538980 -7.019038 49.084341 0.000002 0.000001 0.371888 -0.930E+01 retry log_rel_run_E_err -6.2250296187187626 rel_E_err 1.7877443283362304D-11 png/grid_002520.png/png k, q, energy_removed_layers before adjustment is 203 0.99999504880661250 2.7807653484658726E+047 k, q, energy_removed_layers after adjustment is 215 0.99998449142678603 3.6193606338173514E+047 Layers above q= 0.99998449142678603 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10405.003906250000 max vel inside fraction of cutoff 1771.0951496881323 max c/cs inside fraction of cutoff 0.63982557349884539 average v/vesc outside cutoff 1.0494298725547111 Kinetic plus potential energy outside cutoff 3.6193606338173514E+047 mass inside cutoff 215 51.730007489961068 relax counter 0 log max v [km/s]= 4.3144198434017804 check gamma integral -1.5959683678615718E-002 residual_norm > tol_residual_norm 2522 6.3360849577676275D+00 9.9999999999999995D-07 max_residual > tol_max_residual 2522 8.2363842395546287D+05 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2522 1.5915795726330769D-03 6.6202711465687243D-06 2.2067570488562413D-03 max_abs_correction > tol_max_correction*coeff 2522 4.5315364485560316D+01 6.6202711465687236D-04 2.2067570488562413D-03 solver rejected trial model s% model_number 2522 s% solver_call_number 965 nz 2607 s% num_retries 20 dt 1.0964524884358785D-01 log dt/secyer -8.4591141495460818D+00 retry: avg+max corr+resid -- give up in solver 2522 hydro_solver_step returned ierr -1 s% model_number 2529 nz 2618 s% num_retries 21 retry: adjust_correction failed in eval_equations -- give up in solver 2529 residual_norm > tol_residual_norm 2530 6.7400678666158662D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2530 3.7333900091136898D+03 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2530 1.6813108981810537D-04 1.0071776908930199D-04 3.3572589696433994D-02 max_abs_correction > tol_max_correction*coeff 2530 2.9786203835988796D+00 1.0071776908930198D-02 3.3572589696433994D-02 solver rejected trial model s% model_number 2530 s% solver_call_number 975 nz 2621 s% num_retries 22 dt 9.0522978859144967D-02 log dt/secyer -8.5423451301454136D+00 retry: avg+max corr+resid -- give up in solver 2530 2530 9.388404 2.717E+05 -5.874196 13.485803 51.730810 0.000000 0.000000 0.000000 0.217139 -1.389145 2621 23 -8.8434E+00 9.388404 -0.256048 9.288551 13.389185 -99.000000 51.730810 0.000000 0.059832 0.782861 0.647264 5 2.8747E+05 5.874247 6.179163 13.485775 13.339102 -7.016611 49.084341 0.000002 0.000001 0.371887 -0.949E+01 retry log_rel_run_E_err -6.2248922942912239 rel_E_err 1.7283986149579895D-11 png/grid_002530.png/png k, q, energy_removed_layers before adjustment is 204 0.99999368606730243 3.2472827490743649E+047 k, q, energy_removed_layers after adjustment is 216 0.99998323229191388 3.9900159699763661E+047 Layers above q= 0.99998323229191388 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10405.830078125000 max vel inside fraction of cutoff 1823.8445368595228 max c/cs inside fraction of cutoff 0.66360133084200346 average v/vesc outside cutoff 1.0915599204414979 Kinetic plus potential energy outside cutoff 3.9900159699763661E+047 mass inside cutoff 216 51.729942353894529 relax counter 0 log max v [km/s]= 4.4485011694849454 check gamma integral -1.5696099673822798E-002 hydro_solver_step returned ierr -1 s% model_number 2531 nz 2621 s% num_retries 23 retry: adjust_correction failed in eval_equations -- give up in solver 2531 hydro_solver_step returned ierr -1 s% model_number 2535 nz 2621 s% num_retries 24 retry: adjust_correction failed in eval_equations -- give up in solver 2535 2540 9.385807 2.715E+05 -5.949597 13.421138 51.730810 0.000000 0.000000 0.000000 0.217139 -1.398775 2621 25 -8.6536E+00 9.385807 -0.256700 9.259055 13.369401 -99.000000 51.730810 0.000000 0.059831 0.782861 0.646872 10 2.8747E+05 5.865662 6.176440 13.421108 13.234099 -7.015357 49.084341 0.000002 0.000001 0.371887 -0.958E+01 max increase log_rel_run_E_err -6.2247654913024775 rel_E_err 1.7356099590476872D-11 png/grid_002540.png/png k, q, energy_removed_layers before adjustment is 205 0.99999326832797353 3.4388973923618982E+047 k, q, energy_removed_layers after adjustment is 216 0.99998323229191388 4.1714754757356157E+047 Layers above q= 0.99998323229191388 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10406.255859375000 max vel inside fraction of cutoff 1850.6568683261489 max c/cs inside fraction of cutoff 0.67586286748564361 average v/vesc outside cutoff 1.1175237878860684 Kinetic plus potential energy outside cutoff 4.1714754757356157E+047 mass inside cutoff 216 51.729942353894529 relax counter 0 log max v [km/s]= 4.5250832551764040 check gamma integral -1.5545699056720062E-002 residual_norm > tol_residual_norm 2545 2.4054123975502842D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2545 1.5028557096486782D+03 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 2545 1.9109740877433692D+00 1.5698799995465348D-02 5.2329333318217826D-02 solver rejected trial model s% model_number 2545 s% solver_call_number 993 nz 2600 s% num_retries 25 dt 1.7433618603483392D-01 log dt/secyer -8.2577164264229843D+00 retry: max corr, avg+max resid -- give up in solver 2545 hydro_solver_step returned ierr -1 s% model_number 2550 nz 2602 s% num_retries 26 retry: get_T_tau -- L <= 0 2550 2550 9.378246 2.709E+05 -6.169628 13.234931 51.730810 0.000000 0.000000 0.000000 0.217139 -1.426922 2602 27 -8.4639E+00 9.378246 -0.258563 9.173090 13.311463 -99.000000 51.730810 0.000000 0.059830 0.782861 0.645719 6 2.8747E+05 5.840656 6.168898 13.234894 12.928840 -7.008506 49.084341 0.000002 0.000001 0.371886 -0.988E+01 retry log_rel_run_E_err -6.2246437843710005 rel_E_err 1.6857791857473555D-11 save photos/x550 for model 2550 png/grid_002550.png/png k, q, energy_removed_layers before adjustment is 182 0.99999218229725262 3.9510901233184728E+047 k, q, energy_removed_layers after adjustment is 195 0.99998169670331449 4.6258700988495100E+047 Layers above q= 0.99998169670331449 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10407.466796875000 max vel inside fraction of cutoff 1925.1251581760762 max c/cs inside fraction of cutoff 0.71060618820178745 average v/vesc outside cutoff 1.1371071057157236 Kinetic plus potential energy outside cutoff 4.6258700988495100E+047 mass inside cutoff 195 51.729862916652827 relax counter 0 log max v [km/s]= 4.6238053088357720 check gamma integral -1.5060553013946751E-002 2560 9.363247 1.148E+06 -6.612248 12.873700 51.730810 0.000000 0.000000 0.000000 0.217139 -1.483216 2661 27 -8.1327E+00 9.363247 -0.065278 9.001977 13.194977 -99.000000 51.730810 0.000000 0.059829 0.782861 0.643406 5 2.8747E+05 5.790978 9.064076 12.873641 12.327770 -7.453243 49.084341 0.000002 0.000000 0.371884 0.368E+02 lgRho_cntr log_rel_run_E_err -6.2245260585513842 rel_E_err 1.6306978592027175D-11 png/grid_002560.png/png k, q, energy_removed_layers before adjustment is 241 0.99998918636578615 4.7918177604630886E+047 k, q, energy_removed_layers after adjustment is 257 0.99997837029841530 5.3369290161596263E+047 Layers above q= 0.99997837029841530 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10409.753906250000 max vel inside fraction of cutoff 2059.0308848264049 max c/cs inside fraction of cutoff 0.77577887761510744 average v/vesc outside cutoff 1.1639647688681132 Kinetic plus potential energy outside cutoff 5.3369290161596263E+047 mass inside cutoff 257 51.729690839033800 relax counter 0 log max v [km/s]= 5.1757714770224430 check gamma integral -1.3886793489983503E-002 2570 9.347943 6.879E+05 -7.076766 12.514666 51.730810 0.000000 0.000000 0.000000 0.217139 -1.541084 2752 27 -8.1631E+00 9.347943 0.145612 8.826366 13.073928 -99.000000 51.730810 0.000000 0.059829 0.782861 0.641044 5 2.8747E+05 5.740275 8.595946 12.514577 11.725691 -7.868484 49.084341 0.000002 0.000000 0.371884 0.760E+02 lgRho_cntr log_rel_run_E_err -6.2244311805440811 rel_E_err 1.5305682730868922D-11 png/grid_002570.png/png k, q, energy_removed_layers before adjustment is 347 0.99998723925547239 5.3904295135592500E+047 k, q, energy_removed_layers after adjustment is 360 0.99997746225141304 5.8882096735081397E+047 Layers above q= 0.99997746225141304 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10411.972656250000 max vel inside fraction of cutoff 2180.2491385405801 max c/cs inside fraction of cutoff 0.83795123339824218 average v/vesc outside cutoff 1.2283080065731566 Kinetic plus potential energy outside cutoff 5.8882096735081397E+047 mass inside cutoff 360 51.729643865027064 relax counter 0 log max v [km/s]= 5.2538537671746885 check gamma integral -1.2395804021317521E-002 2580 9.332710 5.196E+05 -7.554634 12.164202 51.730810 0.000000 0.000000 0.000000 0.217139 -1.598994 2823 27 -8.1796E+00 9.332710 0.294235 8.650017 12.951019 -99.000000 51.730810 0.000000 0.059829 0.782861 0.638705 5 2.8747E+05 5.689814 8.405693 12.164069 11.140103 -8.166311 49.084341 0.000002 0.000000 0.371884 0.102E+03 lgRho_cntr log_rel_run_E_err -6.2243386086253807 rel_E_err 1.4129641778094256D-11 png/grid_002580.png/png k, q, energy_removed_layers before adjustment is 424 0.99998509953265480 5.9108011657172982E+047 k, q, energy_removed_layers after adjustment is 437 0.99997542248197668 6.3275513556480778E+047 Layers above q= 0.99997542248197668 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10414.095703125000 max vel inside fraction of cutoff 2288.9806688968024 max c/cs inside fraction of cutoff 0.89645972061296286 average v/vesc outside cutoff 1.2683651250769286 Kinetic plus potential energy outside cutoff 6.3275513556480778E+047 mass inside cutoff 437 51.729538346102402 relax counter 0 log max v [km/s]= 5.2845969379699484 check gamma integral -1.0614727582279592E-002 2590 9.317496 4.271E+05 -8.048121 11.818918 51.730810 0.000000 0.000000 0.000000 0.217139 -1.656994 2861 27 -8.1923E+00 9.317496 0.406914 8.471774 12.825708 -99.000000 51.730810 0.000000 0.059829 0.782861 0.636399 5 2.8747E+05 5.639458 8.290629 11.818722 10.565890 -8.391890 49.084341 0.000002 0.000000 0.371884 0.121E+03 lgRho_cntr log_rel_run_E_err -6.2242469801563409 rel_E_err 1.4025985660034882D-11 png/grid_002590.png/png k, q, energy_removed_layers before adjustment is 471 0.99998323229191488 6.3368152316594815E+047 k, q, energy_removed_layers after adjustment is 483 0.99997263854948759 6.6947017344880695E+047 Layers above q= 0.99997263854948759 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10416.148437500000 max vel inside fraction of cutoff 2388.4534465328370 max c/cs inside fraction of cutoff 0.95234057066395217 average v/vesc outside cutoff 1.2788765730681286 Kinetic plus potential energy outside cutoff 6.6947017344880695E+047 mass inside cutoff 483 51.729394331020416 relax counter 0 log max v [km/s]= 5.3044098033986895 check gamma integral -8.5433165082425596E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.302285 3.681E+05 -8.558100 11.476414 51.730810 0.000000 0.000000 0.000000 0.217139 -1.714987 2891 27 -8.2018E+00 9.302285 0.497406 8.291006 12.697736 -99.000000 51.730810 0.000000 0.059829 0.782861 0.634142 5 2.8747E+05 5.589195 8.213361 11.476131 9.995387 -8.573014 49.084341 0.000002 0.000000 0.371884 0.137E+03 lgRho_cntr log_rel_run_E_err -6.2241563627596133 rel_E_err 1.3656609706138749D-11 save LOGS/profile12.data for model 2600 save photos/x600 for model 2600 png/grid_002600.png/png k, q, energy_removed_layers before adjustment is 501 0.99998169670331594 6.6578344943434283E+047 k, q, energy_removed_layers after adjustment is 514 0.99997116388364804 7.0066107912740596E+047 Layers above q= 0.99997116388364804 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10418.150390625000 max vel inside fraction of cutoff 2480.6455118874092 max c/cs inside fraction of cutoff 1.0062025121258438 average v/vesc outside cutoff 1.3033462821328792 Kinetic plus potential energy outside cutoff 7.0066107912740596E+047 mass inside cutoff 514 51.729318045362412 relax counter 0 log max v [km/s]= 5.3193584391389512 check gamma integral -6.1905639571963851E-003 2610 9.287061 3.263E+05 -9.085555 11.134467 51.730810 0.000000 0.000000 0.000000 0.217139 -1.772870 2917 27 -8.2085E+00 9.287061 0.573117 8.107163 12.566810 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631951 4 2.8747E+05 5.539012 8.155262 11.134059 9.420155 -8.724534 49.084341 0.000002 0.000000 0.371884 0.151E+03 lgRho_cntr log_rel_run_E_err -6.2240666491214025 rel_E_err 1.3136834660587661D-11 png/grid_002610.png/png k, q, energy_removed_layers before adjustment is 529 0.99998049951495782 6.9323946629539713E+047 k, q, energy_removed_layers after adjustment is 543 0.99996961414222763 7.2759099682316714E+047 Layers above q= 0.99996961414222763 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10420.115234375000 max vel inside fraction of cutoff 2567.3232914780019 max c/cs inside fraction of cutoff 1.0586717911739838 average v/vesc outside cutoff 1.3031316686823113 Kinetic plus potential energy outside cutoff 7.2759099682316714E+047 mass inside cutoff 543 51.729237875983820 relax counter 0 log max v [km/s]= 5.3315438635387062 check gamma integral -3.5722319267331780E-003 2620 9.271808 2.949E+05 -9.631346 10.791279 51.730810 0.000000 0.000000 0.000000 0.217139 -1.830526 2931 27 -8.2127E+00 9.271808 0.638381 7.919681 12.432648 -99.000000 51.730810 0.000000 0.059829 0.782861 0.629844 4 2.8747E+05 5.488902 8.110007 10.790695 8.832998 -8.855142 49.084341 0.000002 0.000000 0.371884 0.163E+03 lgRho_cntr log_rel_run_E_err -6.2239791030493743 rel_E_err 1.2269081531729338D-11 png/grid_002620.png/png k, q, energy_removed_layers before adjustment is 545 0.99997924136474892 7.1994521204944389E+047 k, q, energy_removed_layers after adjustment is 559 0.99996766360687728 7.5128880759728810E+047 Layers above q= 0.99996766360687728 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10422.056640625000 max vel inside fraction of cutoff 2649.8733111239867 max c/cs inside fraction of cutoff 1.1102861155642980 average v/vesc outside cutoff 1.3136628322818154 Kinetic plus potential energy outside cutoff 7.5128880759728810E+047 mass inside cutoff 559 51.729136973210679 relax counter 0 log max v [km/s]= 5.3419439366646868 check gamma integral -7.1248930628307026E-004 2630 9.256510 2.704E+05 -10.196181 10.445183 51.730810 0.000000 0.000000 0.000000 0.217139 -1.887831 2946 27 -8.2144E+00 9.256510 0.695960 7.727944 12.294931 -99.000000 51.730810 0.000000 0.059829 0.782861 0.627842 4 2.8747E+05 5.438862 8.074653 10.444349 8.227203 -8.970364 49.084341 0.000002 0.000000 0.371884 0.173E+03 lgRho_cntr log_rel_run_E_err -6.2238933211634979 rel_E_err 1.2186349013311256D-11 png/grid_002630.png/png k, q, energy_removed_layers before adjustment is 562 0.99997746225141448 7.4634546285635486E+047 k, q, energy_removed_layers after adjustment is 575 0.99996663839611455 7.7274981858936152E+047 Layers above q= 0.99996663839611455 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10423.990234375000 max vel inside fraction of cutoff 2729.2643482344806 max c/cs inside fraction of cutoff 1.1614712436928742 average v/vesc outside cutoff 1.3339015044642728 Kinetic plus potential energy outside cutoff 7.7274981858936152E+047 mass inside cutoff 575 51.729083938227738 relax counter 0 log max v [km/s]= 5.3511439795082811 check gamma integral 2.3563453265057796E-003 2640 9.239583 2.479E+05 -10.840766 10.058580 51.730810 0.000000 0.000000 0.000000 0.217139 -1.950445 2951 27 -8.2111E+00 9.239583 0.752731 7.510835 12.138608 -99.000000 51.730810 0.000000 0.059829 0.782861 0.625776 3 2.8747E+05 5.383785 8.037270 10.057348 7.527082 -9.083965 49.084341 0.000002 0.000000 0.371884 0.185E+03 lgRho_cntr log_rel_run_E_err -6.2238103334316870 rel_E_err 1.1783004395792833D-11 png/grid_002640.png/png k, q, energy_removed_layers before adjustment is 570 0.99997646336589552 7.6713863816456863E+047 k, q, energy_removed_layers after adjustment is 584 0.99996469365740315 7.9401616834315783E+047 Layers above q= 0.99996469365740315 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10426.113281250000 max vel inside fraction of cutoff 2813.9940258772285 max c/cs inside fraction of cutoff 1.2178432619317643 average v/vesc outside cutoff 1.3379285535973040 Kinetic plus potential energy outside cutoff 7.9401616834315783E+047 mass inside cutoff 584 51.728983335319427 relax counter 0 log max v [km/s]= 5.3602484989382493 check gamma integral 5.9316918896770354E-003 2650 9.222556 2.292E+05 -11.505677 9.665285 51.730810 0.000000 0.000000 0.000000 0.217139 -2.012340 2967 27 -8.2075E+00 9.222556 0.804163 7.286537 11.976965 -99.000000 51.730810 0.000000 0.059829 0.782861 0.623887 3 2.8747E+05 5.328766 8.004015 9.663465 6.766165 -9.186881 49.084341 0.000002 0.000000 0.371884 0.195E+03 lgRho_cntr log_rel_run_E_err -6.2237286206446303 rel_E_err 1.1640964384368064D-11 save photos/x650 for model 2650 png/grid_002650.png/png k, q, energy_removed_layers before adjustment is 592 0.99997475554297877 7.8767084137103483E+047 k, q, energy_removed_layers after adjustment is 605 0.99996378154023902 8.1324503601361502E+047 Layers above q= 0.99996378154023902 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10428.251953125000 max vel inside fraction of cutoff 2896.5716243585812 max c/cs inside fraction of cutoff 1.2745971280977617 average v/vesc outside cutoff 1.3583296447956377 Kinetic plus potential energy outside cutoff 8.1324503601361502E+047 mass inside cutoff 605 51.728936150759928 relax counter 0 log max v [km/s]= 5.3685053469106725 check gamma integral 9.6466665734703180E-003 2660 9.205413 2.139E+05 -12.175163 9.264636 51.730810 0.000000 0.000000 0.000000 0.217139 -2.073341 2975 27 -8.2024E+00 9.205413 0.851475 7.053806 11.809487 -99.000000 51.730810 0.000000 0.059829 0.782861 0.622203 3 2.8747E+05 5.273817 7.978237 9.261955 5.817727 -9.281552 49.084341 0.000002 0.000000 0.371884 0.205E+03 lgRho_cntr log_rel_run_E_err -6.2236497991302810 rel_E_err 1.0730444451228891D-11 png/grid_002660.png/png k, q, energy_removed_layers before adjustment is 605 0.99997336393175396 8.0735224543858341E+047 k, q, energy_removed_layers after adjustment is 618 0.99996187796515601 8.3102936666612291E+047 Layers above q= 0.99996187796515601 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10430.414062500000 max vel inside fraction of cutoff 2977.4238449665236 max c/cs inside fraction of cutoff 1.3320572694073947 average v/vesc outside cutoff 1.3646575115467054 Kinetic plus potential energy outside cutoff 8.3102936666612291E+047 mass inside cutoff 618 51.728837677279444 relax counter 0 log max v [km/s]= 5.3761683689814035 check gamma integral 1.3423960091530521E-002 2670 9.187837 1.999E+05 -12.799811 8.849970 51.730810 0.000000 0.000000 0.000000 0.217139 -2.134337 2970 27 -8.1151E+00 9.187837 0.896333 6.806880 11.632508 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620724 3 2.8747E+05 5.217988 7.950389 8.846019 5.113526 -9.371310 49.084341 0.000002 0.000000 0.371884 0.215E+03 max increase log_rel_run_E_err -6.2235743198026148 rel_E_err 1.0657251934273019D-11 png/grid_002670.png/png k, q, energy_removed_layers before adjustment is 607 0.99997263854948848 8.2298958532217297E+047 k, q, energy_removed_layers after adjustment is 620 0.99996091298628731 8.4788033337299039E+047 Layers above q= 0.99996091298628731 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10432.656250000000 max vel inside fraction of cutoff 3049.8281807151552 max c/cs inside fraction of cutoff 1.3846377007871808 average v/vesc outside cutoff 1.3826456283231445 Kinetic plus potential energy outside cutoff 8.4788033337299039E+047 mass inside cutoff 620 51.728787758141166 relax counter 0 log max v [km/s]= 5.3834829229586409 check gamma integral 1.7245010147660972E-002 2680 9.169425 1.870E+05 -13.240257 8.391268 51.730810 0.000000 0.000000 0.000000 0.217139 -2.196406 2967 27 -8.1033E+00 9.169425 0.940205 6.537690 11.441015 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619463 3 2.8747E+05 5.160100 7.922790 8.385140 4.420155 -9.459093 49.084341 0.000002 0.000000 0.371884 0.226E+03 lgRho_cntr log_rel_run_E_err -6.2235018124972195 rel_E_err 9.8237044063727214D-12 png/grid_002680.png/png k, q, energy_removed_layers before adjustment is 611 0.99997116388364859 8.4160736897874448E+047 k, q, energy_removed_layers after adjustment is 623 0.99995991307996102 8.6429015553527819E+047 Layers above q= 0.99995991307996102 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10435.041015625000 max vel inside fraction of cutoff 3131.9597113179248 max c/cs inside fraction of cutoff 1.4474480939389234 average v/vesc outside cutoff 1.4000889963746259 Kinetic plus potential energy outside cutoff 8.6429015553527819E+047 mass inside cutoff 623 51.728736032177224 relax counter 0 log max v [km/s]= 5.3906533695309715 check gamma integral 2.1094878559391038E-002 2690 9.151631 1.761E+05 -13.438111 7.960622 51.730810 0.000000 0.000000 0.000000 0.217139 -2.254511 2974 27 -8.1475E+00 9.151631 0.980208 6.265824 11.249661 -99.000000 51.730810 0.000000 0.059829 0.782861 0.618537 3 2.8747E+05 5.104771 7.897998 7.951763 3.548661 -9.539136 49.084341 0.000002 0.000000 0.371884 0.236E+03 lgRho_cntr log_rel_run_E_err -6.2234320096837727 rel_E_err 9.0190900532347557D-12 png/grid_002690.png/png k, q, energy_removed_layers before adjustment is 624 0.99996961414222785 8.5952999543040514E+047 k, q, energy_removed_layers after adjustment is 636 0.99995784245997532 8.7923507549209525E+047 Layers above q= 0.99995784245997532 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10437.402343750000 max vel inside fraction of cutoff 3209.6344003528638 max c/cs inside fraction of cutoff 1.5093452737372799 average v/vesc outside cutoff 1.4077430763872727 Kinetic plus potential energy outside cutoff 8.7923507549209525E+047 mass inside cutoff 636 51.728628917328656 relax counter 0 log max v [km/s]= 5.3972076955692936 check gamma integral 2.4583454018936610E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.133844 1.663E+05 -13.574695 7.534578 51.730810 0.000000 0.000000 0.000000 0.217139 -2.310745 2977 27 -8.1444E+00 9.133844 1.018361 5.980603 11.051804 -99.000000 51.730810 0.000000 0.059829 0.782861 0.617902 3 2.8747E+05 5.050071 7.874938 7.522277 2.642781 -9.615473 49.084341 0.000002 0.000000 0.371884 0.246E+03 lgRho_cntr log_rel_run_E_err -6.2233641253692822 rel_E_err 9.0585956630644673D-12 save LOGS/profile13.data for model 2700 save photos/x700 for model 2700 png/grid_002700.png/png k, q, energy_removed_layers before adjustment is 629 0.99996865955911463 8.7368526465171326E+047 k, q, energy_removed_layers after adjustment is 641 0.99995656108695707 8.9346746878949536E+047 Layers above q= 0.99995656108695707 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10439.830078125000 max vel inside fraction of cutoff 3285.7856632805792 max c/cs inside fraction of cutoff 1.5727714618128261 average v/vesc outside cutoff 1.4202563694085850 Kinetic plus potential energy outside cutoff 8.9346746878949536E+047 mass inside cutoff 641 51.728562630864815 relax counter 0 log max v [km/s]= 5.4034808950926347 check gamma integral 2.7780123629520023E-002 2710 9.114889 1.567E+05 -13.698541 7.092272 51.730810 0.000000 0.000000 0.000000 0.217139 -2.368708 2977 27 -7.9698E+00 9.114889 1.057464 5.659355 10.833302 -99.000000 51.730810 0.000000 0.059829 0.782861 0.617537 3 2.8747E+05 4.992435 7.850215 7.075941 1.637746 -9.693713 49.084341 0.000002 0.000000 0.371884 0.257E+03 lgRho_cntr log_rel_run_E_err -6.2232992393755868 rel_E_err 8.7627247562595842D-12 png/grid_002710.png/png k, q, energy_removed_layers before adjustment is 636 0.99996663839611477 8.9154486319519538E+047 k, q, energy_removed_layers after adjustment is 647 0.99995522288420691 9.0798334268228274E+047 Layers above q= 0.99995522288420691 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10442.507812500000 max vel inside fraction of cutoff 3365.1109642375736 max c/cs inside fraction of cutoff 1.6422728308180772 average v/vesc outside cutoff 1.4331547637458879 Kinetic plus potential energy outside cutoff 9.0798334268228274E+047 mass inside cutoff 647 51.728493404552921 relax counter 0 log max v [km/s]= 5.4099209413011655 check gamma integral 3.0823012752148056E-002 2720 9.096238 1.481E+05 -13.815774 6.673941 51.730810 0.000000 0.000000 0.000000 0.217139 -2.423880 2989 27 -8.0852E+00 9.096238 1.094747 5.323394 10.610192 -99.000000 51.730810 0.000000 0.059829 0.782861 0.617480 3 2.8747E+05 4.936363 7.826185 6.654120 0.607226 -9.768309 49.084341 0.000002 0.000000 0.371884 0.268E+03 lgRho_cntr log_rel_run_E_err -6.2232364132032059 rel_E_err 8.6532617539883269D-12 png/grid_002720.png/png k, q, energy_removed_layers before adjustment is 650 0.99996557370667694 9.0450626809171349E+047 k, q, energy_removed_layers after adjustment is 661 0.99995384734040116 9.2168541846539872E+047 Layers above q= 0.99995384734040116 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10445.257812500000 max vel inside fraction of cutoff 3441.2151756611424 max c/cs inside fraction of cutoff 1.7128316876999876 average v/vesc outside cutoff 1.4454249255103788 Kinetic plus potential energy outside cutoff 9.2168541846539872E+047 mass inside cutoff 661 51.728422246557990 relax counter 0 log max v [km/s]= 5.4160617253511107 check gamma integral 3.3433515307717050E-002 2730 9.077577 1.403E+05 -13.932497 6.272033 51.730810 0.000000 0.000000 0.000000 0.217139 -2.477426 2995 27 -7.9980E+00 9.077577 1.131164 4.964944 10.378601 -99.000000 51.730810 0.000000 0.059829 0.782861 0.617701 3 2.8747E+05 4.880847 7.805596 6.250074 -0.466680 -9.841174 49.084341 0.000002 0.000000 0.371884 0.278E+03 max increase log_rel_run_E_err -6.2231767373567646 rel_E_err 8.0745734485249459D-12 png/grid_002730.png/png k, q, energy_removed_layers before adjustment is 661 0.99996469365740348 9.1712545347884333E+047 k, q, energy_removed_layers after adjustment is 672 0.99995241327594919 9.3491711930203733E+047 Layers above q= 0.99995241327594919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10448.140625000000 max vel inside fraction of cutoff 3515.2024123337783 max c/cs inside fraction of cutoff 1.7858363574548139 average v/vesc outside cutoff 1.4547999391850992 Kinetic plus potential energy outside cutoff 9.3491711930203733E+047 mass inside cutoff 672 51.728348061242642 relax counter 0 log max v [km/s]= 5.4220791330152265 check gamma integral 3.5672034537055197E-002 2740 9.057941 1.326E+05 -14.055970 5.860660 51.730810 0.000000 0.000000 0.000000 0.217139 -2.532244 2999 27 -8.0128E+00 9.057941 1.168785 4.560611 10.125597 -99.000000 51.730810 0.000000 0.059829 0.782861 0.618203 3 2.8747E+05 4.822997 7.781946 5.838332 -1.644782 -9.916445 49.084341 0.000002 0.000000 0.371884 0.290E+03 lgRho_cntr log_rel_run_E_err -6.2231199582241192 rel_E_err 7.8151945519152722D-12 png/grid_002740.png/png k, q, energy_removed_layers before adjustment is 670 0.99996284513669287 9.3271333181335152E+047 k, q, energy_removed_layers after adjustment is 680 0.99995104032160942 9.4838650132944870E+047 Layers above q= 0.99995104032160942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10451.335937500000 max vel inside fraction of cutoff 3590.3118880606467 max c/cs inside fraction of cutoff 1.8654789242510346 average v/vesc outside cutoff 1.4688606414267371 Kinetic plus potential energy outside cutoff 9.4838650132944870E+047 mass inside cutoff 680 51.728277037202879 relax counter 0 log max v [km/s]= 5.4283141285282044 check gamma integral 3.7655089982177849E-002 2750 9.039236 1.256E+05 -14.174454 5.471316 51.730810 0.000000 0.000000 0.000000 0.217139 -2.583233 3003 27 -8.0190E+00 9.039236 1.204108 4.147110 9.875547 -99.000000 51.730810 0.000000 0.059829 0.782861 0.618913 3 2.8747E+05 4.768377 7.759204 5.450226 -2.814463 -9.987120 49.084341 0.000002 0.000000 0.371884 0.301E+03 lgRho_cntr log_rel_run_E_err -6.2230650947243902 rel_E_err 7.3748932473145438D-12 save photos/x750 for model 2750 png/grid_002750.png/png k, q, energy_removed_layers before adjustment is 675 0.99996187796515568 9.4470048182981846E+047 k, q, energy_removed_layers after adjustment is 685 0.99994960576682390 9.6103171089087814E+047 Layers above q= 0.99994960576682390 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10454.556640625000 max vel inside fraction of cutoff 3658.9432614368766 max c/cs inside fraction of cutoff 1.9442213964822503 average v/vesc outside cutoff 1.4807275590419671 Kinetic plus potential energy outside cutoff 9.6103171089087814E+047 mass inside cutoff 685 51.728202826522178 relax counter 0 log max v [km/s]= 5.4341661139096074 check gamma integral 3.9232111685643965E-002 2760 9.019109 1.186E+05 -14.303033 5.046855 51.730810 0.000000 0.000000 0.000000 0.217139 -2.637073 3007 27 -7.9164E+00 9.019109 1.241700 3.668333 9.596460 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619887 3 2.8747E+05 4.710043 7.734369 5.028298 -4.126683 -10.062332 49.084341 0.000002 0.000000 0.371884 0.314E+03 lgRho_cntr log_rel_run_E_err -6.2230125736244180 rel_E_err 7.1535130355132325D-12 png/grid_002760.png/png k, q, energy_removed_layers before adjustment is 682 0.99995991307996113 9.5980196041888142E+047 k, q, energy_removed_layers after adjustment is 691 0.99994813735112609 9.7440538489909939E+047 Layers above q= 0.99994813735112609 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10458.230468750000 max vel inside fraction of cutoff 3728.8267876171726 max c/cs inside fraction of cutoff 2.0320831250894971 average v/vesc outside cutoff 1.4952562838004770 Kinetic plus potential energy outside cutoff 9.7440538489909939E+047 mass inside cutoff 691 51.728126864189065 relax counter 0 log max v [km/s]= 5.4403790280406810 check gamma integral 4.0645564758244462E-002 2770 9.000009 1.124E+05 -14.426144 4.635975 51.730810 0.000000 0.000000 0.000000 0.217139 -2.687396 3007 27 -7.9558E+00 9.000009 1.277040 3.179535 9.321816 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620987 3 2.8747E+05 4.655056 7.711098 4.620520 -5.425226 -10.133039 49.084341 0.000002 0.000000 0.371884 0.327E+03 lgRho_cntr log_rel_run_E_err -6.2229623827937921 rel_E_err 6.8487620412451232D-12 png/grid_002770.png/png k, q, energy_removed_layers before adjustment is 683 0.99995889614883271 9.7152495521232684E+047 k, q, energy_removed_layers after adjustment is 693 0.99994545291871362 9.8682052438246338E+047 Layers above q= 0.99994545291871362 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10461.935546875000 max vel inside fraction of cutoff 3790.4241128647172 max c/cs inside fraction of cutoff 2.1181593498957283 average v/vesc outside cutoff 1.4887762979483252 Kinetic plus potential energy outside cutoff 9.8682052438246338E+047 mass inside cutoff 693 51.727987996326625 relax counter 0 log max v [km/s]= 5.4462058990935018 check gamma integral 4.1769389391313048E-002 2780 8.979964 1.062E+05 -14.556569 4.201070 51.730810 0.000000 0.000000 0.000000 0.217139 -2.739666 3007 27 -7.7791E+00 8.979964 1.313862 2.627882 9.023174 -99.000000 51.730810 0.000000 0.059829 0.782861 0.622291 3 2.8747E+05 4.597654 7.686462 4.189308 -6.846252 -10.206710 49.084341 0.000002 0.000000 0.371884 0.341E+03 lgRho_cntr log_rel_run_E_err -6.2229144858626233 rel_E_err 6.8504634522999016D-12 png/grid_002780.png/png k, q, energy_removed_layers before adjustment is 685 0.99995656108695752 9.8705599140014849E+047 k, q, energy_removed_layers after adjustment is 695 0.99994303505471382 9.9981695202693226E+047 Layers above q= 0.99994303505471382 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10466.076171875000 max vel inside fraction of cutoff 3849.7360601029486 max c/cs inside fraction of cutoff 2.2115313446998428 average v/vesc outside cutoff 1.4947772460715292 Kinetic plus potential energy outside cutoff 9.9981695202693226E+047 mass inside cutoff 695 51.727862918264016 relax counter 0 log max v [km/s]= 5.4522515304965689 check gamma integral 4.2774706716290994E-002 2790 8.960379 1.005E+05 -14.685234 3.788976 51.730810 0.000000 0.000000 0.000000 0.217139 -2.790373 3013 27 -7.8872E+00 8.960379 1.349614 2.048801 8.721150 -99.000000 51.730810 0.000000 0.059829 0.782861 0.623690 3 2.8747E+05 4.541823 7.662693 3.781003 -8.294689 -10.278241 49.084341 0.000002 0.000000 0.371884 0.356E+03 lgRho_cntr log_rel_run_E_err -6.2228692790430209 rel_E_err 5.9700512618130103D-12 png/grid_002790.png/png k, q, energy_removed_layers before adjustment is 694 0.99995522288420746 9.9912534110432383E+047 k, q, energy_removed_layers after adjustment is 704 0.99994176890518061 1.0123462857922210E+048 Layers above q= 0.99994176890518061 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10470.390625000000 max vel inside fraction of cutoff 3901.1991206414159 max c/cs inside fraction of cutoff 2.3050889944068795 average v/vesc outside cutoff 1.5112805020407882 Kinetic plus potential energy outside cutoff 1.0123462857922210E+048 mass inside cutoff 704 51.727797419323387 relax counter 0 log max v [km/s]= 5.4581039880174176 check gamma integral 4.3629163823497207E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 8.940889 9.514E+04 -14.814512 3.425022 51.730810 0.000000 0.000000 0.000000 0.217139 -2.840630 3016 27 -7.7961E+00 8.940889 1.385021 1.430912 8.410638 -99.000000 51.730810 0.000000 0.059829 0.782861 0.625182 3 2.8747E+05 4.486467 7.638103 3.420597 -9.797438 -10.349081 49.084341 0.000002 0.000000 0.371884 0.371E+03 max increase log_rel_run_E_err -6.2228256908197048 rel_E_err 6.0536120046062631D-12 save LOGS/profile14.data for model 2800 save photos/x800 for model 2800 png/grid_002800.png/png k, q, energy_removed_layers before adjustment is 701 0.99995241327594953 1.0137216450101960E+048 k, q, energy_removed_layers after adjustment is 711 0.99993920825402305 1.0246701699052197E+048 Layers above q= 0.99993920825402305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10474.957031250000 max vel inside fraction of cutoff 3946.7374735118847 max c/cs inside fraction of cutoff 2.4012094930236074 average v/vesc outside cutoff 1.5165088863247560 Kinetic plus potential energy outside cutoff 1.0246701699052197E+048 mass inside cutoff 711 51.727664954765487 relax counter 0 log max v [km/s]= 5.4638686372202905 check gamma integral 4.4389367673742706E-002 2810 8.920508 8.983E+04 -14.951103 3.137204 51.730810 0.000000 0.000000 0.000000 0.217139 -2.893106 3013 27 -7.8077E+00 8.920508 1.421937 0.737532 8.075563 -99.000000 51.730810 0.000000 0.059829 0.782861 0.626829 3 2.8747E+05 4.428751 7.612265 3.135470 -11.437615 -10.422939 49.084341 0.000002 0.000000 0.371884 0.387E+03 lgRho_cntr log_rel_run_E_err -6.2227847299881338 rel_E_err 5.7494283674273230D-12 png/grid_002810.png/png k, q, energy_removed_layers before adjustment is 704 0.99995104032160975 1.0258448004231045E+048 k, q, energy_removed_layers after adjustment is 715 0.99993649790769890 1.0376565331757566E+048 Layers above q= 0.99993649790769890 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10480.064453125000 max vel inside fraction of cutoff 3987.2602654754519 max c/cs inside fraction of cutoff 2.5044468913907290 average v/vesc outside cutoff 1.5238020856792331 Kinetic plus potential energy outside cutoff 1.0376565331757566E+048 mass inside cutoff 715 51.727524746355407 relax counter 0 log max v [km/s]= 5.4698382877126077 check gamma integral 4.5117261072171407E-002 2820 8.901202 8.506E+04 -15.081816 2.962863 51.730810 0.000000 0.000000 0.000000 0.217139 -2.942796 3013 27 -7.8113E+00 8.901202 1.456843 0.034131 7.749226 -99.000000 51.730810 0.000000 0.059829 0.782861 0.628463 4 2.8747E+05 4.374226 7.587221 2.962351 -13.058821 -10.492776 49.084341 0.000002 0.000000 0.371884 0.404E+03 lgRho_cntr log_rel_run_E_err -6.2227461291853716 rel_E_err 5.2907899277978050D-12 png/grid_002820.png/png k, q, energy_removed_layers before adjustment is 706 0.99994813735112642 1.0399392130850020E+048 k, q, energy_removed_layers after adjustment is 717 0.99993350772048550 1.0502359999389760E+048 Layers above q= 0.99993350772048550 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10485.240234375000 max vel inside fraction of cutoff 4018.7885602246474 max c/cs inside fraction of cutoff 2.6046456819901973 average v/vesc outside cutoff 1.5272617463072462 Kinetic plus potential energy outside cutoff 1.0502359999389760E+048 mass inside cutoff 717 51.727370061549522 relax counter 0 log max v [km/s]= 5.4754385708851059 check gamma integral 4.5763220688350321E-002 Warning: maximum velocity exceeds speed of light 1 0.3001696664E+11 0.1001258232E+01 Warning: maximum velocity exceeds speed of light 1 0.3005494180E+11 0.1002524947E+01 Warning: maximum velocity exceeds speed of light 1 0.3009129711E+11 0.1003737629E+01 Warning: maximum velocity exceeds speed of light 1 0.3012688839E+11 0.1004924827E+01 Warning: maximum velocity exceeds speed of light 1 0.3016211822E+11 0.1006099967E+01 Warning: maximum velocity exceeds speed of light 1 0.3020409606E+11 0.1007500197E+01 Warning: maximum velocity exceeds speed of light 1 0.3025404486E+11 0.1009166310E+01 Warning: maximum velocity exceeds speed of light 1 0.3029570912E+11 0.1010556080E+01 2830 8.880554 8.022E+04 -15.223140 2.848694 51.730810 0.000000 0.000000 0.000000 0.217139 -2.996022 3006 27 -7.7063E+00 8.880554 1.494209 -0.772166 7.392357 -99.000000 51.730810 0.000000 0.059829 0.782861 0.630271 4 2.8747E+05 4.316025 7.560197 2.848590 -14.869207 -10.567534 49.084341 0.000002 0.000000 0.371884 0.422E+03 lgRho_cntr log_rel_run_E_err -6.2227103489381825 rel_E_err 4.8586185933724736D-12 png/grid_002830.png/png k, q, energy_removed_layers before adjustment is 707 0.99994660689094439 1.0513828245096986E+048 k, q, energy_removed_layers after adjustment is 719 0.99993036291555160 1.0644342950169222E+048 Layers above q= 0.99993036291555160 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10491.183593750000 max vel inside fraction of cutoff 4045.0564945189763 max c/cs inside fraction of cutoff 2.7145599518705352 average v/vesc outside cutoff 1.5420543674569178 Kinetic plus potential energy outside cutoff 1.0644342950169222E+048 mass inside cutoff 719 51.727207378243747 relax counter 0 log max v [km/s]= 5.4813811223495694 check gamma integral 4.6422810454570716E-002 Warning: maximum velocity exceeds speed of light 1 0.3033380358E+11 0.1011826775E+01 Warning: maximum velocity exceeds speed of light 1 0.3037026400E+11 0.1013042963E+01 Warning: maximum velocity exceeds speed of light 1 0.3040595378E+11 0.1014233446E+01 Warning: maximum velocity exceeds speed of light 1 0.3044127883E+11 0.1015411763E+01 Warning: maximum velocity exceeds speed of light 1 0.3048336020E+11 0.1016815446E+01 Warning: maximum velocity exceeds speed of light 1 0.3053342046E+11 0.1018485277E+01 Warning: maximum velocity exceeds speed of light 1 0.3057521505E+11 0.1019879394E+01 Warning: maximum velocity exceeds speed of light 1 0.3061345504E+11 0.1021154943E+01 Warning: maximum velocity exceeds speed of light 1 0.3065006568E+11 0.1022376143E+01 Warning: maximum velocity exceeds speed of light 1 0.3068590873E+11 0.1023571738E+01 2840 8.861057 7.584E+04 -15.358061 2.773812 51.730810 0.000000 0.000000 0.000000 0.217139 -3.046363 3014 27 -7.7419E+00 8.861057 1.529585 -1.587679 7.051276 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632037 4 2.8747E+05 4.261179 7.533366 2.773793 -16.654620 -10.638310 49.084341 0.000002 0.000000 0.371884 0.441E+03 lgRho_cntr log_rel_run_E_err -6.2226763070829900 rel_E_err 4.6758059396585776D-12 png/grid_002840.png/png k, q, energy_removed_layers before adjustment is 771 0.99950899125950587 2.0396419699181287E+048 k, q, energy_removed_layers after adjustment is 811 0.99699152286707959 5.1151271071652493E+048 Layers above q= 0.99699152286707959 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10497.222656250000 max vel inside fraction of cutoff 3926.0740364462281 max c/cs inside fraction of cutoff 2.6638675851453146 average v/vesc outside cutoff 0.97431284173981936 Kinetic plus potential energy outside cutoff 5.1151271071652493E+048 mass inside cutoff 811 51.575178802778204 relax counter 0 log max v [km/s]= 5.4869389889233400 check gamma integral 4.7025709980435704E-002 Warning: maximum velocity exceeds speed of light 1 0.3072138928E+11 0.1024755242E+01 Warning: maximum velocity exceeds speed of light 1 0.3076365096E+11 0.1026164940E+01 Warning: maximum velocity exceeds speed of light 1 0.3081391696E+11 0.1027841633E+01 Warning: maximum velocity exceeds speed of light 1 0.3085589095E+11 0.1029241735E+01 Warning: maximum velocity exceeds speed of light 1 0.3089429950E+11 0.1030522906E+01 Warning: maximum velocity exceeds speed of light 1 0.3093107406E+11 0.1031749573E+01 Warning: maximum velocity exceeds speed of light 1 0.3096707909E+11 0.1032950572E+01 Warning: maximum velocity exceeds speed of light 1 0.3100272096E+11 0.1034139456E+01 Warning: maximum velocity exceeds speed of light 1 0.3104516585E+11 0.1035555266E+01 Warning: maximum velocity exceeds speed of light 1 0.3109563699E+11 0.1037238802E+01 2850 8.840691 7.148E+04 -15.500569 2.708887 51.730810 0.000000 0.000000 0.000000 0.217139 -3.099080 3015 27 -7.5616E+00 8.840691 1.566733 -2.500208 6.696972 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633932 5 2.8747E+05 4.203981 7.505002 2.708884 -18.601999 -10.712631 49.084341 0.000002 0.000000 0.371884 0.462E+03 lgRho_cntr log_rel_run_E_err -6.2226440302158910 rel_E_err 4.2674551101955072D-12 save photos/x850 for model 2850 png/grid_002850.png/png k, q, energy_removed_layers before adjustment is 788 0.99886250606280924 4.9243075438008275E+048 k, q, energy_removed_layers after adjustment is 822 0.99589939106174841 8.6745607608222841E+048 Layers above q= 0.99589939106174841 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10504.025390625000 max vel inside fraction of cutoff 3896.2930782087265 max c/cs inside fraction of cutoff 2.7297677971496714 average v/vesc outside cutoff 1.0068395743485574 Kinetic plus potential energy outside cutoff 8.6745607608222841E+048 mass inside cutoff 822 51.518681940122669 relax counter 0 log max v [km/s]= 5.4926994576386052 check gamma integral 4.7641745512217899E-002 Warning: maximum velocity exceeds speed of light 1 0.3113779140E+11 0.1038644921E+01 Warning: maximum velocity exceeds speed of light 1 0.3117637072E+11 0.1039931789E+01 Warning: maximum velocity exceeds speed of light 1 0.3121331235E+11 0.1041164029E+01 Warning: maximum velocity exceeds speed of light 1 0.3124948329E+11 0.1042370562E+01 Warning: maximum velocity exceeds speed of light 1 0.3128529101E+11 0.1043564979E+01 Warning: maximum velocity exceeds speed of light 1 0.3132792405E+11 0.1044987064E+01 Warning: maximum velocity exceeds speed of light 1 0.3137860584E+11 0.1046677627E+01 Warning: maximum velocity exceeds speed of light 1 0.3142094679E+11 0.1048089969E+01 Warning: maximum velocity exceeds speed of light 1 0.3145970334E+11 0.1049382748E+01 Warning: maximum velocity exceeds speed of light 1 0.3149681886E+11 0.1050620789E+01 2860 8.820867 6.743E+04 -15.640877 2.654150 51.730810 0.000000 0.000000 0.000000 0.217139 -3.150519 3017 27 -7.6631E+00 8.820867 1.603167 -3.452251 6.363401 -99.000000 51.730810 0.000000 0.059829 0.782861 0.635825 5 2.8747E+05 4.148394 7.476496 2.654149 -20.582421 -10.785525 49.084341 0.000002 0.000000 0.371884 0.483E+03 lgRho_cntr log_rel_run_E_err -6.2226131856347200 rel_E_err 4.0428621456244739D-12 png/grid_002860.png/png k, q, energy_removed_layers before adjustment is 800 0.99819469280563422 8.3268766627022337E+048 k, q, energy_removed_layers after adjustment is 833 0.99447398976524926 1.2842350459979554E+049 Layers above q= 0.99447398976524926 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10511.197265625000 max vel inside fraction of cutoff 3833.4148775155186 max c/cs inside fraction of cutoff 2.7603071124091705 average v/vesc outside cutoff 1.0160153824109943 Kinetic plus potential energy outside cutoff 1.2842350459979554E+049 mass inside cutoff 833 51.444944776820364 relax counter 0 log max v [km/s]= 5.4982666928487420 check gamma integral 4.8232282371986214E-002 Warning: maximum velocity exceeds speed of light 1 0.3153316383E+11 0.1051833126E+01 Warning: maximum velocity exceeds speed of light 1 0.3156914899E+11 0.1053033462E+01 Warning: maximum velocity exceeds speed of light 1 0.3161199238E+11 0.1054462564E+01 Warning: maximum velocity exceeds speed of light 1 0.3166294297E+11 0.1056162092E+01 Warning: maximum velocity exceeds speed of light 1 0.3170554202E+11 0.1057583044E+01 Warning: maximum velocity exceeds speed of light 1 0.3174455763E+11 0.1058884464E+01 Warning: maximum velocity exceeds speed of light 1 0.3178193731E+11 0.1060131316E+01 Warning: maximum velocity exceeds speed of light 1 0.3181855169E+11 0.1061352640E+01 Warning: maximum velocity exceeds speed of light 1 0.3185480936E+11 0.1062562066E+01 Warning: maximum velocity exceeds speed of light 1 0.3189796833E+11 0.1064001694E+01 2870 8.801196 6.362E+04 -15.781693 2.601105 51.730810 0.000000 0.000000 0.000000 0.217139 -3.201686 3014 27 -7.5657E+00 8.801196 1.639685 -4.464292 6.055253 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637750 5 2.8747E+05 4.093320 7.448419 2.601105 -22.634057 -10.858586 49.084341 0.000002 0.000000 0.371884 0.506E+03 max increase log_rel_run_E_err -6.2225838703912011 rel_E_err 4.0456979045958272D-12 png/grid_002870.png/png k, q, energy_removed_layers before adjustment is 806 0.99740196331636788 1.2562037746540644E+049 k, q, energy_removed_layers after adjustment is 837 0.99321215973471888 1.7514739435061767E+049 Layers above q= 0.99321215973471888 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10518.912109375000 max vel inside fraction of cutoff 3758.5471426859231 max c/cs inside fraction of cutoff 2.7809816935926066 average v/vesc outside cutoff 1.0142440059014881 Kinetic plus potential energy outside cutoff 1.7514739435061767E+049 mass inside cutoff 837 51.379669287560276 relax counter 0 log max v [km/s]= 5.5037630225180383 check gamma integral 4.8812125995858116E-002 Warning: maximum velocity exceeds speed of light 1 0.3194926631E+11 0.1065712811E+01 Warning: maximum velocity exceeds speed of light 1 0.3199215878E+11 0.1067143550E+01 Warning: maximum velocity exceeds speed of light 1 0.3203144337E+11 0.1068453943E+01 Warning: maximum velocity exceeds speed of light 1 0.3206907939E+11 0.1069709345E+01 Warning: maximum velocity exceeds speed of light 1 0.3210594418E+11 0.1070939022E+01 Warning: maximum velocity exceeds speed of light 1 0.3214245053E+11 0.1072156743E+01 Warning: maximum velocity exceeds speed of light 1 0.3218587350E+11 0.1073605177E+01 Warning: maximum velocity exceeds speed of light 1 0.3223745080E+11 0.1075325611E+01 Warning: maximum velocity exceeds speed of light 1 0.3228057524E+11 0.1076764087E+01 Warning: maximum velocity exceeds speed of light 1 0.3232007047E+11 0.1078081506E+01 2880 8.780689 5.978E+04 -15.930230 2.546189 51.730810 0.000000 0.000000 0.000000 0.217139 -3.255174 3016 27 -7.5687E+00 8.780689 1.678263 -5.597363 5.769647 -99.000000 51.730810 0.000000 0.059829 0.782861 0.639802 5 2.8747E+05 4.035982 7.417411 2.546189 -24.869147 -10.935766 49.084341 0.000002 0.000000 0.371884 0.531E+03 lgRho_cntr log_rel_run_E_err -6.2225563022383819 rel_E_err 3.6819634322504147D-12 png/grid_002880.png/png k, q, energy_removed_layers before adjustment is 817 0.99643707949039850 1.7726527059658234E+049 k, q, energy_removed_layers after adjustment is 844 0.99199600587429237 2.2794726769676379E+049 Layers above q= 0.99199600587429237 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10527.683593750000 max vel inside fraction of cutoff 3684.5847749810373 max c/cs inside fraction of cutoff 2.8202178931951387 average v/vesc outside cutoff 1.0335107152849385 Kinetic plus potential energy outside cutoff 2.2794726769676379E+049 mass inside cutoff 844 51.316756663566423 relax counter 0 log max v [km/s]= 5.5094722990745897 check gamma integral 4.9412066661070557E-002 Warning: maximum velocity exceeds speed of light 1 0.3235790665E+11 0.1079343585E+01 Warning: maximum velocity exceeds speed of light 1 0.3239496500E+11 0.1080579719E+01 Warning: maximum velocity exceeds speed of light 1 0.3243166039E+11 0.1081803745E+01 Warning: maximum velocity exceeds speed of light 1 0.3247531114E+11 0.1083259778E+01 Warning: maximum velocity exceeds speed of light 1 0.3252714809E+11 0.1084988872E+01 Warning: maximum velocity exceeds speed of light 1 0.3257050654E+11 0.1086435154E+01 Warning: maximum velocity exceeds speed of light 1 0.3261022642E+11 0.1087760067E+01 Warning: maximum velocity exceeds speed of light 1 0.3264828525E+11 0.1089029573E+01 Warning: maximum velocity exceeds speed of light 1 0.3268557034E+11 0.1090273270E+01 Warning: maximum velocity exceeds speed of light 1 0.3272249830E+11 0.1091505054E+01 2890 8.761288 5.628E+04 -16.072388 2.494344 51.730810 0.000000 0.000000 0.000000 0.217139 -3.305881 3017 27 -7.5626E+00 8.761288 1.715325 -6.748693 5.537131 -99.000000 51.730810 0.000000 0.059829 0.782861 0.641789 5 2.8747E+05 3.981820 7.386886 2.494344 -27.078189 -11.009915 49.084341 0.000002 0.000000 0.371884 0.557E+03 lgRho_cntr log_rel_run_E_err -6.2225304125280596 rel_E_err 3.4443259232672640D-12 png/grid_002890.png/png k, q, energy_removed_layers before adjustment is 825 0.99552427884244066 2.2777812334340293E+049 k, q, energy_removed_layers after adjustment is 851 0.99072318845016827 2.8044798923721406E+049 Layers above q= 0.99072318845016827 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10536.759765625000 max vel inside fraction of cutoff 3622.9959102702301 max c/cs inside fraction of cutoff 2.8759022360043063 average v/vesc outside cutoff 1.0575486898576185 Kinetic plus potential energy outside cutoff 2.8044798923721406E+049 mass inside cutoff 851 51.250912787538567 relax counter 0 log max v [km/s]= 5.5148464537529458 check gamma integral 4.9976387502011048E-002 Warning: maximum velocity exceeds speed of light 1 0.3276641920E+11 0.1092970097E+01 Warning: maximum velocity exceeds speed of light 1 0.3281856749E+11 0.1094709577E+01 Warning: maximum velocity exceeds speed of light 1 0.3286220994E+11 0.1096165333E+01 Warning: maximum velocity exceeds speed of light 1 0.3290220677E+11 0.1097499483E+01 Warning: maximum velocity exceeds speed of light 1 0.3294054361E+11 0.1098778263E+01 Warning: maximum velocity exceeds speed of light 1 0.3297810923E+11 0.1100031317E+01 Warning: maximum velocity exceeds speed of light 1 0.3302277362E+11 0.1101521160E+01 Warning: maximum velocity exceeds speed of light 1 0.3307577921E+11 0.1103289237E+01 Warning: maximum velocity exceeds speed of light 1 0.3311991990E+11 0.1104761611E+01 Warning: maximum velocity exceeds speed of light 1 0.3316027819E+11 0.1106107819E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 8.740391 5.268E+04 -16.227348 2.438522 51.730810 0.000000 0.000000 0.000000 0.217139 -3.360634 3012 27 -7.4847E+00 8.740391 1.756029 -8.085208 5.322520 -99.000000 51.730810 0.000000 0.059829 0.782861 0.643973 5 2.8747E+05 3.923557 7.353314 2.438522 -29.565328 -11.091350 49.084341 0.000002 0.000000 0.371884 0.586E+03 lgRho_cntr log_rel_run_E_err -6.2225057659866749 rel_E_err 3.2866571205258205D-12 save LOGS/profile15.data for model 2900 save photos/x900 for model 2900 png/grid_002900.png/png k, q, energy_removed_layers before adjustment is 827 0.99447398976524937 2.8868195622160610E+049 k, q, energy_removed_layers after adjustment is 851 0.98940396385423468 3.3847234863978841E+049 Layers above q= 0.98940396385423468 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10547.525390625000 max vel inside fraction of cutoff 3531.3397539081834 max c/cs inside fraction of cutoff 2.9060757317971198 average v/vesc outside cutoff 1.0654619556536846 Kinetic plus potential energy outside cutoff 3.3847234863978841E+049 mass inside cutoff 851 51.182668230934276 relax counter 0 log max v [km/s]= 5.5206181653418271 check gamma integral 5.0581776737220335E-002 Warning: maximum velocity exceeds speed of light 1 0.3319892030E+11 0.1107396781E+01 Warning: maximum velocity exceeds speed of light 1 0.3323676667E+11 0.1108659200E+01 Warning: maximum velocity exceeds speed of light 1 0.3328174847E+11 0.1110159632E+01 Warning: maximum velocity exceeds speed of light 1 0.3333510805E+11 0.1111939516E+01 Warning: maximum velocity exceeds speed of light 1 0.3337955699E+11 0.1113422173E+01 Warning: maximum velocity exceeds speed of light 1 0.3342021400E+11 0.1114778344E+01 Warning: maximum velocity exceeds speed of light 1 0.3345915472E+11 0.1116077267E+01 Warning: maximum velocity exceeds speed of light 1 0.3349730195E+11 0.1117349722E+01 Warning: maximum velocity exceeds speed of light 1 0.3354263368E+11 0.1118861825E+01 Warning: maximum velocity exceeds speed of light 1 0.3359639980E+11 0.1120655270E+01 2910 8.719824 4.928E+04 -16.381757 2.383590 51.730810 0.000000 0.000000 0.000000 0.217139 -3.414632 3019 27 -7.3197E+00 8.719824 1.797039 -9.509082 5.136721 -99.000000 51.730810 0.000000 0.059829 0.782861 0.646172 5 2.8747E+05 3.866297 7.319279 2.383590 -32.127694 -11.173395 49.084341 0.000002 0.000000 0.371884 0.618E+03 lgRho_cntr log_rel_run_E_err -6.2224822959220187 rel_E_err 3.0707608341854192D-12 png/grid_002910.png/png k, q, energy_removed_layers before adjustment is 837 0.99348455788305845 3.4602286775845842E+049 k, q, energy_removed_layers after adjustment is 860 0.98821170889210297 3.9578190816967040E+049 Layers above q= 0.98821170889210297 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10559.283203125000 max vel inside fraction of cutoff 3436.4448691403377 max c/cs inside fraction of cutoff 2.9339799813021945 average v/vesc outside cutoff 1.0905181049620378 Kinetic plus potential energy outside cutoff 3.9578190816967040E+049 mass inside cutoff 860 51.120991916301612 relax counter 0 log max v [km/s]= 5.5262927407380085 check gamma integral 5.1175835486493584E-002 Warning: maximum velocity exceeds speed of light 1 0.3364120559E+11 0.1122149830E+01 Warning: maximum velocity exceeds speed of light 1 0.3368219242E+11 0.1123517004E+01 Warning: maximum velocity exceeds speed of light 1 0.3372144887E+11 0.1124826458E+01 Warning: maximum velocity exceeds speed of light 1 0.3375990596E+11 0.1126109249E+01 Warning: maximum velocity exceeds speed of light 1 0.3380558352E+11 0.1127632888E+01 Warning: maximum velocity exceeds speed of light 1 0.3385973013E+11 0.1129439025E+01 Warning: maximum velocity exceeds speed of light 1 0.3390487962E+11 0.1130945049E+01 Warning: maximum velocity exceeds speed of light 1 0.3394620217E+11 0.1132323421E+01 Warning: maximum velocity exceeds speed of light 1 0.3398579521E+11 0.1133644103E+01 Warning: maximum velocity exceeds speed of light 1 0.3402459111E+11 0.1134938195E+01 2920 8.699908 4.609E+04 -16.533106 2.330405 51.730810 0.000000 0.000000 0.000000 0.217139 -3.467008 3024 27 -7.4198E+00 8.699908 1.837837 -11.003173 4.970833 -99.000000 51.730810 0.000000 0.059829 0.782861 0.648349 5 2.8747E+05 3.810930 7.284758 2.330405 -34.722510 -11.255018 49.084341 0.000002 0.000000 0.371884 0.651E+03 lgRho_cntr log_rel_run_E_err -6.2224604284158174 rel_E_err 2.9696183827356678D-12 png/grid_002920.png/png k, q, energy_removed_layers before adjustment is 847 0.99237963043238797 4.0261555181126615E+049 k, q, energy_removed_layers after adjustment is 868 0.98705934534544260 4.5079098940722206E+049 Layers above q= 0.98705934534544260 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10571.974609375000 max vel inside fraction of cutoff 3358.5528474008215 max c/cs inside fraction of cutoff 2.9861128783837096 average v/vesc outside cutoff 1.1027400031116206 Kinetic plus potential energy outside cutoff 4.5079098940722206E+049 mass inside cutoff 868 51.061379216893805 relax counter 0 log max v [km/s]= 5.5317929147796123 check gamma integral 5.1750020330872816E-002 Warning: maximum velocity exceeds speed of light 1 0.3407065580E+11 0.1136474748E+01 Warning: maximum velocity exceeds speed of light 1 0.3412523973E+11 0.1138295472E+01 Warning: maximum velocity exceeds speed of light 1 0.3417077893E+11 0.1139814496E+01 Warning: maximum velocity exceeds speed of light 1 0.3421247246E+11 0.1141205242E+01 Warning: maximum velocity exceeds speed of light 1 0.3425243084E+11 0.1142538110E+01 Warning: maximum velocity exceeds speed of light 1 0.3429159473E+11 0.1143844477E+01 Warning: maximum velocity exceeds speed of light 1 0.3433808572E+11 0.1145395249E+01 Warning: maximum velocity exceeds speed of light 1 0.3439316661E+11 0.1147232550E+01 Warning: maximum velocity exceeds speed of light 1 0.3443916554E+11 0.1148766909E+01 Warning: maximum velocity exceeds speed of light 1 0.3448131213E+11 0.1150172768E+01 2930 8.679005 4.286E+04 -16.693923 2.274589 51.730810 0.000000 0.000000 0.000000 0.217139 -3.522076 3024 27 -7.3377E+00 8.679005 1.882091 -12.708188 4.804257 -99.000000 51.730810 0.000000 0.059829 0.782861 0.650681 5 2.8747E+05 3.752900 7.247235 2.274589 -37.571683 -11.343554 49.084341 0.000002 0.000000 0.371884 0.689E+03 lgRho_cntr log_rel_run_E_err -6.2224400251388898 rel_E_err 2.7488064814050068D-12 png/grid_002930.png/png k, q, energy_removed_layers before adjustment is 852 0.99127190215040695 4.6339388766901776E+049 k, q, energy_removed_layers after adjustment is 871 0.98588808204870593 5.0707065298220165E+049 Layers above q= 0.98588808204870593 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10586.957031250000 max vel inside fraction of cutoff 3251.4118696234013 max c/cs inside fraction of cutoff 3.0150627246083639 average v/vesc outside cutoff 1.1214782038373314 Kinetic plus potential energy outside cutoff 5.0707065298220165E+049 mass inside cutoff 871 51.000788818110266 relax counter 0 log max v [km/s]= 5.5375837837844246 check gamma integral 5.2352219467072580E-002 Warning: maximum velocity exceeds speed of light 1 0.3452173125E+11 0.1151521005E+01 Warning: maximum velocity exceeds speed of light 1 0.3456136967E+11 0.1152843200E+01 Warning: maximum velocity exceeds speed of light 1 0.3460841351E+11 0.1154412414E+01 Warning: maximum velocity exceeds speed of light 1 0.3466412627E+11 0.1156270791E+01 Warning: maximum velocity exceeds speed of light 1 0.3471069677E+11 0.1157824216E+01 Warning: maximum velocity exceeds speed of light 1 0.3475339669E+11 0.1159248532E+01 Warning: maximum velocity exceeds speed of light 1 0.3479436676E+11 0.1160615147E+01 Warning: maximum velocity exceeds speed of light 1 0.3483456133E+11 0.1161955893E+01 Warning: maximum velocity exceeds speed of light 1 0.3488224723E+11 0.1163546524E+01 Warning: maximum velocity exceeds speed of light 1 0.3493869993E+11 0.1165429583E+01 2940 8.658534 3.982E+04 -16.853417 2.219935 51.730810 0.000000 0.000000 0.000000 0.217139 -3.576081 3027 27 -7.1637E+00 8.658534 1.927195 -14.515999 4.644455 -99.000000 51.730810 0.000000 0.059829 0.782861 0.653015 5 2.8747E+05 3.696151 7.209665 2.219935 -40.493257 -11.433791 49.084341 0.000002 0.000000 0.371884 0.729E+03 lgRho_cntr log_rel_run_E_err -6.2224205108160131 rel_E_err 2.5548399494875600D-12 png/grid_002940.png/png k, q, energy_removed_layers before adjustment is 859 0.99004148545073378 5.1930655825884064E+049 k, q, energy_removed_layers after adjustment is 876 0.98482545803474164 5.6048409106165300E+049 Layers above q= 0.98482545803474164 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10603.666015625000 max vel inside fraction of cutoff 3143.2169298832273 max c/cs inside fraction of cutoff 3.0518958833867065 average v/vesc outside cutoff 1.1464940980914728 Kinetic plus potential energy outside cutoff 5.6048409106165300E+049 mass inside cutoff 876 50.945818417396396 relax counter 0 log max v [km/s]= 5.5433067408411256 check gamma integral 5.2942243262887816E-002 Warning: maximum velocity exceeds speed of light 1 0.3498594673E+11 0.1167005566E+01 Warning: maximum velocity exceeds speed of light 1 0.3502930742E+11 0.1168451923E+01 Warning: maximum velocity exceeds speed of light 1 0.3507094269E+11 0.1169840727E+01 Warning: maximum velocity exceeds speed of light 1 0.3511181602E+11 0.1171204114E+01 Warning: maximum velocity exceeds speed of light 1 0.3516029275E+11 0.1172821124E+01 Warning: maximum velocity exceeds speed of light 1 0.3521766702E+11 0.1174734924E+01 Warning: maximum velocity exceeds speed of light 1 0.3526576688E+11 0.1176339362E+01 Warning: maximum velocity exceeds speed of light 1 0.3530996858E+11 0.1177813772E+01 Warning: maximum velocity exceeds speed of light 1 0.3535245382E+11 0.1179230927E+01 Warning: maximum velocity exceeds speed of light 1 0.3539419734E+11 0.1180623341E+01 2950 8.638744 3.698E+04 -17.009523 2.167116 51.730810 0.000000 0.000000 0.000000 0.217139 -3.628340 3033 27 -7.2473E+00 8.638744 1.972919 -16.325304 4.491139 -99.000000 51.730810 0.000000 0.059829 0.782861 0.655321 5 2.8747E+05 3.641373 7.172588 2.167116 -43.447040 -11.525266 49.084341 0.000002 0.000000 0.371884 0.771E+03 lgRho_cntr log_rel_run_E_err -6.2224024227733681 rel_E_err 2.4544537790494688D-12 save photos/x950 for model 2950 png/grid_002950.png/png k, q, energy_removed_layers before adjustment is 868 0.98897520234244440 5.7261009172524327E+049 k, q, energy_removed_layers after adjustment is 884 0.98377721934947582 6.0976018620770175E+049 Layers above q= 0.98377721934947582 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10622.228515625000 max vel inside fraction of cutoff 3030.0600420362939 max c/cs inside fraction of cutoff 3.0692924726766484 average v/vesc outside cutoff 1.1653611915614990 Kinetic plus potential energy outside cutoff 6.0976018620770175E+049 mass inside cutoff 884 50.891592181384780 relax counter 0 log max v [km/s]= 5.5489320679339214 check gamma integral 5.3513662704340784E-002 Warning: maximum velocity exceeds speed of light 1 0.3544369583E+11 0.1182274433E+01 Warning: maximum velocity exceeds speed of light 1 0.3550226258E+11 0.1184228009E+01 Warning: maximum velocity exceeds speed of light 1 0.3555145082E+11 0.1185868752E+01 Warning: maximum velocity exceeds speed of light 1 0.3559672439E+11 0.1187378916E+01 Warning: maximum velocity exceeds speed of light 1 0.3564029375E+11 0.1188832234E+01 Warning: maximum velocity exceeds speed of light 1 0.3568314627E+11 0.1190261640E+01 Warning: maximum velocity exceeds speed of light 1 0.3573393921E+11 0.1191955910E+01 Warning: maximum velocity exceeds speed of light 1 0.3579400257E+11 0.1193959408E+01 Warning: maximum velocity exceeds speed of light 1 0.3584455914E+11 0.1195645794E+01 Warning: maximum velocity exceeds speed of light 1 0.3589115738E+11 0.1197200144E+01 2960 8.618073 3.410E+04 -17.174663 2.111956 51.730810 0.000000 0.000000 0.000000 0.217139 -3.682990 3033 27 -7.1474E+00 8.618073 2.023682 -18.087005 4.331242 -99.000000 51.730810 0.000000 0.059829 0.782861 0.657777 5 2.8747E+05 3.584235 7.133013 2.111956 -46.674816 -11.626821 49.084341 0.000002 0.000000 0.371884 0.818E+03 lgRho_cntr log_rel_run_E_err -6.2223853231287958 rel_E_err 2.2640792589458220D-12 png/grid_002960.png/png k, q, energy_removed_layers before adjustment is 869 0.98787257871856049 6.2828327218679165E+049 k, q, energy_removed_layers after adjustment is 883 0.98306966181629607 6.5878388777556878E+049 Layers above q= 0.98306966181629607 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10644.949218750000 max vel inside fraction of cutoff 2928.5983109199756 max c/cs inside fraction of cutoff 3.1311954044577663 average v/vesc outside cutoff 1.1979288062954261 Kinetic plus potential energy outside cutoff 6.5878388777556878E+049 mass inside cutoff 883 50.854989657240878 relax counter 0 log max v [km/s]= 5.5549874632773459 check gamma integral 5.4112766724643123E-002 Warning: maximum velocity exceeds speed of light 1 0.3593605649E+11 0.1198697817E+01 Warning: maximum velocity exceeds speed of light 1 0.3598026380E+11 0.1200172414E+01 Warning: maximum velocity exceeds speed of light 1 0.3603262852E+11 0.1201919113E+01 Warning: maximum velocity exceeds speed of light 1 0.3609450585E+11 0.1203983119E+01 Warning: maximum velocity exceeds speed of light 1 0.3614672431E+11 0.1205724939E+01 Warning: maximum velocity exceeds speed of light 1 0.3619495447E+11 0.1207333724E+01 Warning: maximum velocity exceeds speed of light 1 0.3624150289E+11 0.1208886412E+01 Warning: maximum velocity exceeds speed of light 1 0.3629659884E+11 0.1210724215E+01 Warning: maximum velocity exceeds speed of light 1 0.3636165161E+11 0.1212894142E+01 Warning: maximum velocity exceeds speed of light 1 0.3641617603E+11 0.1214712881E+01 2970 8.597555 3.126E+04 -17.340738 2.059631 51.730810 0.000000 0.000000 0.000000 0.217139 -3.737279 3031 27 -7.0225E+00 8.597555 2.078327 -19.767325 4.172324 -99.000000 51.730810 0.000000 0.059829 0.782861 0.660266 5 2.8747E+05 3.527602 7.091266 2.059631 -50.029901 -11.736144 49.084341 0.000002 0.000000 0.371884 0.871E+03 lgRho_cntr log_rel_run_E_err -6.2223692049457791 rel_E_err 2.1797626212724442D-12 png/grid_002970.png/png k, q, energy_removed_layers before adjustment is 866 0.98678729773659657 6.7853511771773931E+049 k, q, energy_removed_layers after adjustment is 880 0.98202429824908244 7.0503132671703068E+049 Layers above q= 0.98202429824908244 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10672.173828125000 max vel inside fraction of cutoff 2802.2423893259352 max c/cs inside fraction of cutoff 3.1680246312414706 average v/vesc outside cutoff 1.2260948180911968 Kinetic plus potential energy outside cutoff 7.0503132671703068E+049 mass inside cutoff 880 50.800912153414259 relax counter 0 log max v [km/s]= 5.5612943396718348 check gamma integral 5.4711002462917865E-002 Warning: maximum velocity exceeds speed of light 1 0.3646640649E+11 0.1216388389E+01 Warning: maximum velocity exceeds speed of light 1 0.3651486581E+11 0.1218004817E+01 Warning: maximum velocity exceeds speed of light 1 0.3657217154E+11 0.1219916331E+01 Warning: maximum velocity exceeds speed of light 1 0.3663975461E+11 0.1222170660E+01 Warning: maximum velocity exceeds speed of light 1 0.3669657040E+11 0.1224065830E+01 Warning: maximum velocity exceeds speed of light 1 0.3674905843E+11 0.1225816642E+01 Warning: maximum velocity exceeds speed of light 1 0.3679980859E+11 0.1227509486E+01 Warning: maximum velocity exceeds speed of light 1 0.3685976382E+11 0.1229509377E+01 Warning: maximum velocity exceeds speed of light 1 0.3693039334E+11 0.1231865324E+01 Warning: maximum velocity exceeds speed of light 1 0.3699010863E+11 0.1233857212E+01 2980 8.577093 2.838E+04 -17.508557 2.011760 51.730810 0.000000 0.000000 0.000000 0.217139 -3.791453 3033 27 -6.9186E+00 8.577093 2.139402 -21.636211 4.013392 -99.000000 51.730810 0.000000 0.059829 0.782861 0.662800 5 2.8747E+05 3.471206 7.045602 2.011760 -53.533395 -11.858330 49.084341 0.000002 0.000000 0.371884 0.932E+03 lgRho_cntr log_rel_run_E_err -6.2223539663733263 rel_E_err 2.0050792761498370D-12 png/grid_002980.png/png k, q, energy_removed_layers before adjustment is 869 0.98562514992177497 7.2580289591105921E+049 k, q, energy_removed_layers after adjustment is 882 0.98111854954572075 7.4941031669243648E+049 Layers above q= 0.98111854954572075 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10706.416015625000 max vel inside fraction of cutoff 2661.2757932581953 max c/cs inside fraction of cutoff 3.2050865639480954 average v/vesc outside cutoff 1.2623327764065690 Kinetic plus potential energy outside cutoff 7.4941031669243648E+049 mass inside cutoff 882 50.754057039549380 relax counter 0 log max v [km/s]= 5.5680856066865392 check gamma integral 5.5313042677332579E-002 Warning: maximum velocity exceeds speed of light 1 0.3704552048E+11 0.1235705552E+01 Warning: maximum velocity exceeds speed of light 1 0.3709930569E+11 0.1237499633E+01 Warning: maximum velocity exceeds speed of light 1 0.3716277157E+11 0.1239616627E+01 Warning: maximum velocity exceeds speed of light 1 0.3723743883E+11 0.1242107259E+01 Warning: maximum velocity exceeds speed of light 1 0.3730110445E+11 0.1244230916E+01 Warning: maximum velocity exceeds speed of light 1 0.3736057234E+11 0.1246214551E+01 Warning: maximum velocity exceeds speed of light 1 0.3743058994E+11 0.1248550087E+01 Warning: maximum velocity exceeds speed of light 1 0.3751273724E+11 0.1251290225E+01 Warning: maximum velocity exceeds speed of light 1 0.3758216368E+11 0.1253606042E+01 Warning: maximum velocity exceeds speed of light 1 0.3764697574E+11 0.1255767940E+01 2990 8.557019 2.536E+04 -17.675404 1.964630 51.730810 0.000000 0.000000 0.000000 0.217139 -3.844616 3040 27 -6.8061E+00 8.557019 2.211251 -23.903537 3.856798 -99.000000 51.730810 0.000000 0.059829 0.782861 0.665338 5 2.8747E+05 3.415964 6.993782 1.964630 -57.130759 -12.002071 49.084341 0.000002 0.000000 0.371884 0.101E+04 lgRho_cntr log_rel_run_E_err -6.2223399575124994 rel_E_err 1.8787931970270985D-12 png/grid_002990.png/png k, q, energy_removed_layers before adjustment is 876 0.98449661014663181 7.7367417496518265E+049 k, q, energy_removed_layers after adjustment is 887 0.98039412584250063 7.9240780767508690E+049 Layers above q= 0.98039412584250063 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10752.597656250000 max vel inside fraction of cutoff 2514.4386922373433 max c/cs inside fraction of cutoff 3.2699606982775533 average v/vesc outside cutoff 1.3023885363091501 Kinetic plus potential energy outside cutoff 7.9240780767508690E+049 mass inside cutoff 887 50.716582014771724 relax counter 0 log max v [km/s]= 5.5757300941461168 check gamma integral 5.5912490785678691E-002 Warning: maximum velocity exceeds speed of light 1 0.3772310730E+11 0.1258307415E+01 Warning: maximum velocity exceeds speed of light 1 0.3781218968E+11 0.1261278884E+01 Warning: maximum velocity exceeds speed of light 1 0.3788855070E+11 0.1263826013E+01 Warning: maximum velocity exceeds speed of light 1 0.3796076478E+11 0.1266234816E+01 Warning: maximum velocity exceeds speed of light 1 0.3804533146E+11 0.1269055657E+01 Warning: maximum velocity exceeds speed of light 1 0.3814393149E+11 0.1272344599E+01 Warning: maximum velocity exceeds speed of light 1 0.3823122322E+11 0.1275256338E+01 Warning: maximum velocity exceeds speed of light 1 0.3833288416E+11 0.1278647382E+01 Warning: maximum velocity exceeds speed of light 1 0.3845061101E+11 0.1282574327E+01 Warning: maximum velocity exceeds speed of light 1 0.3855702761E+11 0.1286124003E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 8.537926 2.158E+04 -17.836343 1.919651 51.730810 0.000000 0.000000 0.000000 0.217139 -3.895184 3048 27 -6.4754E+00 8.537926 2.315302 -27.292939 3.706573 -99.000000 51.730810 0.000000 0.059829 0.782861 0.667802 5 2.8747E+05 3.363499 6.921835 1.919651 -60.707491 -12.210230 49.084341 0.000002 0.000000 0.371884 0.112E+04 lgRho_cntr log_rel_run_E_err -6.2223266398882666 rel_E_err 1.7770842327486885D-12 save LOGS/profile16.data for model 3000 save photos/3000 for model 3000 png/grid_003000.png/png k, q, energy_removed_layers before adjustment is 877 0.98306966181629496 8.2848475039547949E+049 k, q, energy_removed_layers after adjustment is 887 0.97976516709437322 8.4105438452031212E+049 Layers above q= 0.97976516709437322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10832.853515625000 max vel inside fraction of cutoff 2279.1824778838704 max c/cs inside fraction of cutoff 3.2935874673252581 average v/vesc outside cutoff 1.3871968655550764 Kinetic plus potential energy outside cutoff 8.4105438452031212E+049 mass inside cutoff 887 50.684045469424824 relax counter 0 log max v [km/s]= 5.5861035464572071 check gamma integral 5.6502036426597818E-002 Warning: maximum velocity exceeds speed of light 1 0.3867992802E+11 0.1290223519E+01 Warning: maximum velocity exceeds speed of light 1 0.3882093026E+11 0.1294926848E+01 Warning: maximum velocity exceeds speed of light 1 0.3898146297E+11 0.1300281643E+01 Warning: maximum velocity exceeds speed of light 1 0.3915926603E+11 0.1306212514E+01 Warning: maximum velocity exceeds speed of light 1 0.3930967588E+11 0.1311229647E+01 Warning: maximum velocity exceeds speed of light 1 0.3944962117E+11 0.1315897719E+01 Warning: maximum velocity exceeds speed of light 1 0.3960802959E+11 0.1321181655E+01 Warning: maximum velocity exceeds speed of light 1 0.3977306848E+11 0.1326686760E+01 Warning: maximum velocity exceeds speed of light 1 0.3989867604E+11 0.1330876577E+01 Warning: maximum velocity exceeds speed of light 1 0.3999526422E+11 0.1334098412E+01 3010 8.550220 1.639E+04 -17.734606 1.948396 51.730810 0.000000 0.000000 0.000000 0.217139 -3.863098 3098 27 -6.2970E+00 8.550220 2.496203 -32.149370 3.797749 -99.000000 51.730810 0.000000 0.059829 0.782861 0.666105 5 2.8747E+05 3.397068 6.805050 1.948396 -58.391406 -12.572127 49.084341 0.000002 0.000000 0.371884 0.133E+04 lgRho_cntr log_rel_run_E_err -6.2223136504628407 rel_E_err 1.6859633722603349D-12 png/grid_003010.png/png k, q, energy_removed_layers before adjustment is 884 0.98090499978014511 8.8971131597875799E+049 k, q, energy_removed_layers after adjustment is 892 0.97855469047153487 8.9512404033388458E+049 Layers above q= 0.97855469047153487 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11021.375000000000 max vel inside fraction of cutoff 1901.2272663595497 max c/cs inside fraction of cutoff 3.2120314190196266 average v/vesc outside cutoff 1.5192639074785692 Kinetic plus potential energy outside cutoff 8.9512404033388458E+049 mass inside cutoff 892 50.621426533528620 relax counter 0 log max v [km/s]= 5.6020085701946636 check gamma integral 5.6205932629723523E-002 Warning: maximum velocity exceeds speed of light 1 0.4007014325E+11 0.1336596108E+01 Warning: maximum velocity exceeds speed of light 1 0.4012856318E+11 0.1338544787E+01 Warning: maximum velocity exceeds speed of light 1 0.4017635929E+11 0.1340139093E+01 Warning: maximum velocity exceeds speed of light 1 0.4021783444E+11 0.1341522556E+01 Warning: maximum velocity exceeds speed of light 1 0.4025514721E+11 0.1342767176E+01 Warning: maximum velocity exceeds speed of light 1 0.4028946850E+11 0.1343912010E+01 Warning: maximum velocity exceeds speed of light 1 0.4032148121E+11 0.1344979840E+01 Warning: maximum velocity exceeds speed of light 1 0.4035161297E+11 0.1345984927E+01 Warning: maximum velocity exceeds speed of light 1 0.4038015091E+11 0.1346936850E+01 Warning: maximum velocity exceeds speed of light 1 0.4040730086E+11 0.1347842475E+01 3020 8.572967 1.505E+04 -17.546077 2.001596 51.730810 0.000000 0.000000 0.000000 0.217139 -3.803433 3145 27 -6.7680E+00 8.572967 2.552604 -31.457255 3.972834 -99.000000 51.730810 0.000000 0.059829 0.782861 0.663086 5 2.8747E+05 3.459390 6.769484 2.001596 -54.266582 -12.684959 49.066765 0.000002 0.000000 0.371884 0.140E+04 lgRho_cntr log_rel_run_E_err -6.2223007114133670 rel_E_err 1.8237842264658967D-12 png/grid_003020.png/png k, q, energy_removed_layers before adjustment is 883 0.98039412584250019 9.0294869581842084E+049 k, q, energy_removed_layers after adjustment is 889 0.97855469047153487 9.0652179391442592E+049 Layers above q= 0.97855469047153487 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11096.552734375000 max vel inside fraction of cutoff 1794.0729702292176 max c/cs inside fraction of cutoff 3.2244913049692050 average v/vesc outside cutoff 1.5761866056027714 Kinetic plus potential energy outside cutoff 9.0652179391442592E+049 mass inside cutoff 889 50.621426533528620 relax counter 0 log max v [km/s]= 5.6064598412512412 check gamma integral 5.5574232993559403E-002 Warning: maximum velocity exceeds speed of light 1 0.4043321867E+11 0.1348707000E+01 Warning: maximum velocity exceeds speed of light 1 0.4045802791E+11 0.1349534547E+01 Warning: maximum velocity exceeds speed of light 1 0.4048182982E+11 0.1350328494E+01 Warning: maximum velocity exceeds speed of light 1 0.4050470943E+11 0.1351091675E+01 Warning: maximum velocity exceeds speed of light 1 0.4052673960E+11 0.1351826523E+01 Warning: maximum velocity exceeds speed of light 1 0.4054798361E+11 0.1352535147E+01 Warning: maximum velocity exceeds speed of light 1 0.4056849694E+11 0.1353219398E+01 Warning: maximum velocity exceeds speed of light 1 0.4058832881E+11 0.1353880917E+01 Warning: maximum velocity exceeds speed of light 1 0.4060752313E+11 0.1354521171E+01 Warning: maximum velocity exceeds speed of light 1 0.4062611929E+11 0.1355141472E+01 3030 8.592349 1.434E+04 -17.387368 2.046782 51.730810 0.000000 0.000000 0.000000 0.217139 -3.752563 3163 27 -6.8831E+00 8.592349 2.584150 -30.822256 4.122096 -99.000000 51.730810 0.000000 0.059829 0.782861 0.660577 5 2.8747E+05 3.512597 6.749437 2.046782 -50.914335 -12.748067 49.066765 0.000002 0.000000 0.371884 0.144E+04 lgRho_cntr log_rel_run_E_err -6.2222874667168808 rel_E_err 1.7901338500487663D-12 png/grid_003030.png/png k, q, energy_removed_layers before adjustment is 884 0.98039412584250030 9.0807949704968285E+049 k, q, energy_removed_layers after adjustment is 890 0.97855469047153498 9.1195626554656032E+049 Layers above q= 0.97855469047153498 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11142.712890625000 max vel inside fraction of cutoff 1734.0088278546957 max c/cs inside fraction of cutoff 3.2250272330390044 average v/vesc outside cutoff 1.6092272601131090 Kinetic plus potential energy outside cutoff 9.1195626554656032E+049 mass inside cutoff 890 50.621426533528634 relax counter 0 log max v [km/s]= 5.6088053393946966 check gamma integral 5.5027375085122614E-002 Warning: maximum velocity exceeds speed of light 1 0.4064415294E+11 0.1355743010E+01 Warning: maximum velocity exceeds speed of light 1 0.4066165661E+11 0.1356326870E+01 Warning: maximum velocity exceeds speed of light 1 0.4067866013E+11 0.1356894046E+01 Warning: maximum velocity exceeds speed of light 1 0.4069519078E+11 0.1357445449E+01 Warning: maximum velocity exceeds speed of light 1 0.4071127331E+11 0.1357981905E+01 Warning: maximum velocity exceeds speed of light 1 0.4072693011E+11 0.1358504159E+01 Warning: maximum velocity exceeds speed of light 1 0.4074218210E+11 0.1359012911E+01 Warning: maximum velocity exceeds speed of light 1 0.4075704823E+11 0.1359508792E+01 Warning: maximum velocity exceeds speed of light 1 0.4077154624E+11 0.1359992393E+01 Warning: maximum velocity exceeds speed of light 1 0.4078569268E+11 0.1360464267E+01 3040 8.611353 1.383E+04 -17.233488 2.093145 51.730810 0.000000 0.000000 0.000000 0.217139 -3.702704 3183 27 -6.9622E+00 8.611353 2.608147 -30.218735 4.268421 -99.000000 51.730810 0.000000 0.059829 0.782861 0.658165 5 2.8747E+05 3.564842 6.734245 2.093145 -47.765923 -12.796073 49.066765 0.000002 0.000000 0.371884 0.147E+04 lgRho_cntr log_rel_run_E_err -6.2222736022789356 rel_E_err 1.9589583679752581D-12 png/grid_003040.png/png k, q, energy_removed_layers before adjustment is 884 0.98008421228025189 9.1287295697989255E+049 k, q, energy_removed_layers after adjustment is 890 0.97823225888212462 9.1583315693288155E+049 Layers above q= 0.97823225888212462 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11179.970703125000 max vel inside fraction of cutoff 1673.7358809446762 max c/cs inside fraction of cutoff 3.1749467577149550 average v/vesc outside cutoff 1.6247736791990144 Kinetic plus potential energy outside cutoff 9.1583315693288155E+049 mass inside cutoff 890 50.604746886315901 relax counter 0 log max v [km/s]= 5.6105078424771850 check gamma integral 5.4486057273155870E-002 Warning: maximum velocity exceeds speed of light 1 0.4079950279E+11 0.1360924923E+01 Warning: maximum velocity exceeds speed of light 1 0.4081299067E+11 0.1361374831E+01 Warning: maximum velocity exceeds speed of light 1 0.4082616954E+11 0.1361814430E+01 Warning: maximum velocity exceeds speed of light 1 0.4083905182E+11 0.1362244137E+01 Warning: maximum velocity exceeds speed of light 1 0.4085164927E+11 0.1362664342E+01 Warning: maximum velocity exceeds speed of light 1 0.4086397295E+11 0.1363075416E+01 Warning: maximum velocity exceeds speed of light 1 0.4087603331E+11 0.1363477706E+01 Warning: maximum velocity exceeds speed of light 1 0.4088784015E+11 0.1363871540E+01 Warning: maximum velocity exceeds speed of light 1 0.4089940271E+11 0.1364257226E+01 Warning: maximum velocity exceeds speed of light 1 0.4091072978E+11 0.1364635056E+01 3050 8.630161 1.343E+04 -17.082875 2.143146 51.730810 0.000000 0.000000 0.000000 0.217139 -3.653386 3198 27 -7.0245E+00 8.630161 2.627674 -29.642754 4.413283 -99.000000 51.730810 0.000000 0.059829 0.782861 0.655822 5 2.8747E+05 3.616622 6.721838 2.143146 -44.778940 -12.835137 49.066765 0.000002 0.000000 0.371884 0.150E+04 lgRho_cntr log_rel_run_E_err -6.2222591341139992 rel_E_err 2.0309879467935523D-12 save photos/x050 for model 3050 png/grid_003050.png/png k, q, energy_removed_layers before adjustment is 886 0.98008421228025200 9.1560047416108354E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212473 9.1872310654572307E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11211.738281250000 max vel inside fraction of cutoff 1642.3392403320211 max c/cs inside fraction of cutoff 3.1806483954949658 average v/vesc outside cutoff 1.6459770523192523 Kinetic plus potential energy outside cutoff 9.1872310654572307E+049 mass inside cutoff 892 50.604746886315901 relax counter 0 log max v [km/s]= 5.6118372266310361 check gamma integral 5.3946510937593679E-002 Warning: maximum velocity exceeds speed of light 1 0.4092182968E+11 0.1365005309E+01 Warning: maximum velocity exceeds speed of light 1 0.4093271033E+11 0.1365368249E+01 Warning: maximum velocity exceeds speed of light 1 0.4094337924E+11 0.1365724125E+01 Warning: maximum velocity exceeds speed of light 1 0.4095384348E+11 0.1366073174E+01 Warning: maximum velocity exceeds speed of light 1 0.4096410970E+11 0.1366415619E+01 Warning: maximum velocity exceeds speed of light 1 0.4097418419E+11 0.1366751668E+01 Warning: maximum velocity exceeds speed of light 1 0.4098407288E+11 0.1367081519E+01 Warning: maximum velocity exceeds speed of light 1 0.4099378143E+11 0.1367405361E+01 Warning: maximum velocity exceeds speed of light 1 0.4100331524E+11 0.1367723375E+01 Warning: maximum velocity exceeds speed of light 1 0.4101267953E+11 0.1368035734E+01 3060 8.648842 1.309E+04 -16.934926 2.192827 51.730810 0.000000 0.000000 0.000000 0.217139 -3.604440 3205 27 -7.0769E+00 8.648842 2.644165 -29.092356 4.557409 -99.000000 51.730810 0.000000 0.059829 0.782861 0.653540 5 2.8747E+05 3.668121 6.711355 2.192827 -41.933804 -12.868128 49.066765 0.000002 0.000000 0.371884 0.152E+04 lgRho_cntr log_rel_run_E_err -6.2222441360582064 rel_E_err 2.1578422864956155D-12 png/grid_003060.png/png k, q, energy_removed_layers before adjustment is 887 0.97976516709437378 9.1855148416396123E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212462 9.2100645961449140E+049 Layers above q= 0.97823225888212462 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11239.623046875000 max vel inside fraction of cutoff 1608.3359530238624 max c/cs inside fraction of cutoff 3.1733292942031883 average v/vesc outside cutoff 1.6641980296479904 Kinetic plus potential energy outside cutoff 9.2100645961449140E+049 mass inside cutoff 892 50.604746886315901 relax counter 0 log max v [km/s]= 5.6129181444438148 check gamma integral 5.3407496516415839E-002 Warning: maximum velocity exceeds speed of light 1 0.4102187927E+11 0.1368342604E+01 Warning: maximum velocity exceeds speed of light 1 0.4103091929E+11 0.1368644147E+01 Warning: maximum velocity exceeds speed of light 1 0.4103980421E+11 0.1368940516E+01 Warning: maximum velocity exceeds speed of light 1 0.4104853846E+11 0.1369231859E+01 Warning: maximum velocity exceeds speed of light 1 0.4105712628E+11 0.1369518318E+01 Warning: maximum velocity exceeds speed of light 1 0.4106557174E+11 0.1369800028E+01 Warning: maximum velocity exceeds speed of light 1 0.4107387871E+11 0.1370077119E+01 Warning: maximum velocity exceeds speed of light 1 0.4108205090E+11 0.1370349714E+01 Warning: maximum velocity exceeds speed of light 1 0.4109009189E+11 0.1370617932E+01 Warning: maximum velocity exceeds speed of light 1 0.4109800508E+11 0.1370881888E+01 3070 8.667429 1.281E+04 -16.789328 2.242273 51.730810 0.000000 0.000000 0.000000 0.217139 -3.555784 3207 27 -7.1225E+00 8.667429 2.658432 -28.566402 4.701529 -99.000000 51.730810 0.000000 0.059829 0.782861 0.651311 4 2.8747E+05 3.719432 6.702275 2.242273 -39.217975 -12.896669 49.066765 0.000002 0.000000 0.371884 0.154E+04 lgRho_cntr log_rel_run_E_err -6.2222283298973915 rel_E_err 2.2294933967476987D-12 png/grid_003070.png/png k, q, energy_removed_layers before adjustment is 888 0.97976516709437378 9.2033927667476914E+049 k, q, energy_removed_layers after adjustment is 894 0.97823225888212473 9.2285967801916477E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11264.562500000000 max vel inside fraction of cutoff 1578.1989655334794 max c/cs inside fraction of cutoff 3.1650967193020185 average v/vesc outside cutoff 1.6801896547877444 Kinetic plus potential energy outside cutoff 9.2285967801916477E+049 mass inside cutoff 894 50.604746886315901 relax counter 0 log max v [km/s]= 5.6138207415031696 check gamma integral 5.2868479639894710E-002 Warning: maximum velocity exceeds speed of light 1 0.4110579376E+11 0.1371141690E+01 Warning: maximum velocity exceeds speed of light 1 0.4111346110E+11 0.1371397445E+01 Warning: maximum velocity exceeds speed of light 1 0.4112101018E+11 0.1371649255E+01 Warning: maximum velocity exceeds speed of light 1 0.4112844397E+11 0.1371897220E+01 Warning: maximum velocity exceeds speed of light 1 0.4113576535E+11 0.1372141435E+01 Warning: maximum velocity exceeds speed of light 1 0.4114297711E+11 0.1372381993E+01 Warning: maximum velocity exceeds speed of light 1 0.4115008192E+11 0.1372618984E+01 Warning: maximum velocity exceeds speed of light 1 0.4115708234E+11 0.1372852493E+01 Warning: maximum velocity exceeds speed of light 1 0.4116398083E+11 0.1373082602E+01 Warning: maximum velocity exceeds speed of light 1 0.4117077974E+11 0.1373309389E+01 3080 8.685940 1.257E+04 -16.645906 2.291530 51.730810 0.000000 0.000000 0.000000 0.217139 -3.507377 3238 27 -7.1633E+00 8.685940 2.670986 -28.064074 4.846772 -99.000000 51.730810 0.000000 0.059829 0.782861 0.649134 4 2.8747E+05 3.770604 6.694296 2.291530 -36.622398 -12.921785 49.066765 0.000002 0.000000 0.371884 0.155E+04 lgRho_cntr log_rel_run_E_err -6.2222115935170788 rel_E_err 2.3296925087551597D-12 png/grid_003080.png/png k, q, energy_removed_layers before adjustment is 888 0.97976516709437378 9.2185839875066296E+049 k, q, energy_removed_layers after adjustment is 895 0.97823225888212473 9.2442466942165661E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11287.150390625000 max vel inside fraction of cutoff 1552.5326311828042 max c/cs inside fraction of cutoff 3.1574986122580637 average v/vesc outside cutoff 1.6944644139801606 Kinetic plus potential energy outside cutoff 9.2442466942165661E+049 mass inside cutoff 895 50.604746886315901 relax counter 0 log max v [km/s]= 5.6145890922573534 check gamma integral 5.2329300657103610E-002 Warning: maximum velocity exceeds speed of light 1 0.4117748137E+11 0.1373532931E+01 Warning: maximum velocity exceeds speed of light 1 0.4118408791E+11 0.1373753302E+01 Warning: maximum velocity exceeds speed of light 1 0.4119060151E+11 0.1373970572E+01 Warning: maximum velocity exceeds speed of light 1 0.4119702428E+11 0.1374184813E+01 Warning: maximum velocity exceeds speed of light 1 0.4120335828E+11 0.1374396092E+01 Warning: maximum velocity exceeds speed of light 1 0.4120960550E+11 0.1374604477E+01 Warning: maximum velocity exceeds speed of light 1 0.4121576790E+11 0.1374810033E+01 Warning: maximum velocity exceeds speed of light 1 0.4122184738E+11 0.1375012822E+01 Warning: maximum velocity exceeds speed of light 1 0.4122784575E+11 0.1375212906E+01 Warning: maximum velocity exceeds speed of light 1 0.4123376474E+11 0.1375410343E+01 3090 8.704388 1.236E+04 -16.504534 2.340626 51.730810 0.000000 0.000000 0.000000 0.217139 -3.459200 3256 27 -7.2003E+00 8.704388 2.682180 -27.584221 4.995178 -99.000000 51.730810 0.000000 0.059829 0.782861 0.647005 4 2.8747E+05 3.821666 6.687197 2.340626 -34.139654 -12.944179 49.066765 0.000002 0.000000 0.371884 0.157E+04 lgRho_cntr log_rel_run_E_err -6.2221942641779853 rel_E_err 2.3605090605837467D-12 png/grid_003090.png/png k, q, energy_removed_layers before adjustment is 887 0.97976516709437378 9.2317356440770781E+049 k, q, energy_removed_layers after adjustment is 894 0.97823225888212473 9.2577549621987472E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11307.816406250000 max vel inside fraction of cutoff 1659.0765741882449 max c/cs inside fraction of cutoff 3.1503669056740713 average v/vesc outside cutoff 1.7073583473059657 Kinetic plus potential energy outside cutoff 9.2577549621987472E+049 mass inside cutoff 894 50.604746886315901 relax counter 0 log max v [km/s]= 5.6152529886984972 check gamma integral 5.1789830874577024E-002 Warning: maximum velocity exceeds speed of light 1 0.4123960601E+11 0.1375605187E+01 Warning: maximum velocity exceeds speed of light 1 0.4124537116E+11 0.1375797491E+01 Warning: maximum velocity exceeds speed of light 1 0.4125106173E+11 0.1375987308E+01 Warning: maximum velocity exceeds speed of light 1 0.4125667921E+11 0.1376174687E+01 Warning: maximum velocity exceeds speed of light 1 0.4126222508E+11 0.1376359678E+01 Warning: maximum velocity exceeds speed of light 1 0.4126770080E+11 0.1376542328E+01 Warning: maximum velocity exceeds speed of light 1 0.4127310780E+11 0.1376722686E+01 Warning: maximum velocity exceeds speed of light 1 0.4127844751E+11 0.1376900800E+01 Warning: maximum velocity exceeds speed of light 1 0.4128372133E+11 0.1377076715E+01 Warning: maximum velocity exceeds speed of light 1 0.4128893062E+11 0.1377250478E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 8.722778 1.217E+04 -16.365146 2.389576 51.730810 0.000000 0.000000 0.000000 0.217139 -3.411242 3261 27 -7.2341E+00 8.722778 2.692268 -27.125125 5.150299 -99.000000 51.730810 0.000000 0.059829 0.782861 0.644923 4 2.8747E+05 3.872637 6.680801 2.389576 -31.763511 -12.964358 49.066765 0.000002 0.000000 0.371884 0.158E+04 lgRho_cntr log_rel_run_E_err -6.2221761447188353 rel_E_err 2.5705467976833563D-12 save LOGS/profile17.data for model 3100 save photos/x100 for model 3100 png/grid_003100.png/png k, q, energy_removed_layers before adjustment is 887 0.97952426031688744 9.2506751781893988E+049 k, q, energy_removed_layers after adjustment is 893 0.97823225888212473 9.2694772750280101E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11326.876953125000 max vel inside fraction of cutoff 1833.7635676515811 max c/cs inside fraction of cutoff 3.1434974653754333 average v/vesc outside cutoff 1.7191048635484081 Kinetic plus potential energy outside cutoff 9.2694772750280101E+049 mass inside cutoff 893 50.604746886315901 relax counter 0 log max v [km/s]= 5.6158336348584008 check gamma integral 5.1249840158562820E-002 Warning: maximum velocity exceeds speed of light 1 0.4129407673E+11 0.1377422134E+01 Warning: maximum velocity exceeds speed of light 1 0.4129916095E+11 0.1377591726E+01 Warning: maximum velocity exceeds speed of light 1 0.4130418454E+11 0.1377759294E+01 Warning: maximum velocity exceeds speed of light 1 0.4130914871E+11 0.1377924881E+01 Warning: maximum velocity exceeds speed of light 1 0.4131405464E+11 0.1378088525E+01 Warning: maximum velocity exceeds speed of light 1 0.4131890345E+11 0.1378250264E+01 Warning: maximum velocity exceeds speed of light 1 0.4132369627E+11 0.1378410136E+01 Warning: maximum velocity exceeds speed of light 1 0.4132843420E+11 0.1378568176E+01 Warning: maximum velocity exceeds speed of light 1 0.4133311830E+11 0.1378724421E+01 Warning: maximum velocity exceeds speed of light 1 0.4133774965E+11 0.1378878906E+01 3110 8.741110 1.200E+04 -16.227708 2.438380 51.730810 0.000000 0.000000 0.000000 0.217139 -3.363509 3276 27 -7.2648E+00 8.741110 2.701443 -26.685120 5.317784 -99.000000 51.730810 0.000000 0.059829 0.782861 0.642887 4 2.8747E+05 3.923516 6.674989 2.438380 -29.488855 -12.982713 49.066765 0.000002 0.000000 0.371884 0.160E+04 lgRho_cntr log_rel_run_E_err -6.2221570657951553 rel_E_err 2.7526054085099797D-12 png/grid_003110.png/png k, q, energy_removed_layers before adjustment is 884 0.97952426031688744 9.2607536309911583E+049 k, q, energy_removed_layers after adjustment is 890 0.97823225888212473 9.2797815493646834E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11344.576171875000 max vel inside fraction of cutoff 2008.3237188041417 max c/cs inside fraction of cutoff 3.1367840427445155 average v/vesc outside cutoff 1.7298959290033920 Kinetic plus potential energy outside cutoff 9.2797815493646834E+049 mass inside cutoff 890 50.604746886315901 relax counter 0 log max v [km/s]= 5.6163468307903273 check gamma integral 5.0708815324483042E-002 Warning: maximum velocity exceeds speed of light 1 0.4134232931E+11 0.1379031667E+01 Warning: maximum velocity exceeds speed of light 1 0.4134685829E+11 0.1379182738E+01 Warning: maximum velocity exceeds speed of light 1 0.4135133763E+11 0.1379332152E+01 Warning: maximum velocity exceeds speed of light 1 0.4135576831E+11 0.1379479944E+01 Warning: maximum velocity exceeds speed of light 1 0.4136015127E+11 0.1379626144E+01 Warning: maximum velocity exceeds speed of light 1 0.4136448743E+11 0.1379770782E+01 Warning: maximum velocity exceeds speed of light 1 0.4136877767E+11 0.1379913889E+01 Warning: maximum velocity exceeds speed of light 1 0.4137302283E+11 0.1380055493E+01 Warning: maximum velocity exceeds speed of light 1 0.4137722371E+11 0.1380195619E+01 Warning: maximum velocity exceeds speed of light 1 0.4138138108E+11 0.1380334294E+01 3120 8.759387 1.185E+04 -16.092120 2.487039 51.730810 0.000000 0.000000 0.000000 0.217139 -3.316005 3296 27 -7.2924E+00 8.759387 2.709862 -26.262940 5.505290 -99.000000 51.730810 0.000000 0.059829 0.782861 0.640897 4 2.8747E+05 3.974306 6.669674 2.487039 -27.310703 -12.999556 49.066765 0.000002 0.000000 0.371884 0.161E+04 lgRho_cntr log_rel_run_E_err -6.2221370377865135 rel_E_err 2.8284164344512119D-12 png/grid_003120.png/png k, q, energy_removed_layers before adjustment is 883 0.97952426031688744 9.2696797653225052E+049 k, q, energy_removed_layers after adjustment is 889 0.97823225888212473 9.2889473393832910E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11361.130859375000 max vel inside fraction of cutoff 2192.4387514395748 max c/cs inside fraction of cutoff 3.1301734178714491 average v/vesc outside cutoff 1.7398898463599195 Kinetic plus potential energy outside cutoff 9.2889473393832910E+049 mass inside cutoff 889 50.604746886315901 relax counter 0 log max v [km/s]= 5.6168049809034724 check gamma integral 5.0165637382674745E-002 Warning: maximum velocity exceeds speed of light 1 0.4138549568E+11 0.1380471542E+01 Warning: maximum velocity exceeds speed of light 1 0.4138956823E+11 0.1380607388E+01 Warning: maximum velocity exceeds speed of light 1 0.4139359941E+11 0.1380741854E+01 Warning: maximum velocity exceeds speed of light 1 0.4139758990E+11 0.1380874962E+01 Warning: maximum velocity exceeds speed of light 1 0.4140154034E+11 0.1381006734E+01 Warning: maximum velocity exceeds speed of light 1 0.4140545136E+11 0.1381137192E+01 Warning: maximum velocity exceeds speed of light 1 0.4140932357E+11 0.1381266355E+01 Warning: maximum velocity exceeds speed of light 1 0.4141315753E+11 0.1381394242E+01 Warning: maximum velocity exceeds speed of light 1 0.4141695381E+11 0.1381520872E+01 Warning: maximum velocity exceeds speed of light 1 0.4142071291E+11 0.1381646262E+01 3130 8.777619 1.171E+04 -15.958178 2.535584 51.730810 0.000000 0.000000 0.000000 0.217139 -3.268710 3312 27 -7.3178E+00 8.777619 2.717648 -25.857695 5.720648 -99.000000 51.730810 0.000000 0.059829 0.782861 0.638950 4 2.8747E+05 4.025039 6.664785 2.535584 -25.223095 -13.015132 49.066765 0.000002 0.000000 0.371884 0.162E+04 lgRho_cntr log_rel_run_E_err -6.2221159048998578 rel_E_err 2.9450627539372092D-12 png/grid_003130.png/png k, q, energy_removed_layers before adjustment is 885 0.97952426031688744 9.2776777715873680E+049 k, q, energy_removed_layers after adjustment is 891 0.97823225888212473 9.2971848737003669E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11376.712890625000 max vel inside fraction of cutoff 2385.7641930505015 max c/cs inside fraction of cutoff 3.1236410363510414 average v/vesc outside cutoff 1.7492106738730870 Kinetic plus potential energy outside cutoff 9.2971848737003669E+049 mass inside cutoff 891 50.604746886315901 relax counter 0 log max v [km/s]= 5.6172175694129756 check gamma integral 4.9619228846633751E-002 Warning: maximum velocity exceeds speed of light 1 0.4142443528E+11 0.1381770427E+01 Warning: maximum velocity exceeds speed of light 1 0.4142812135E+11 0.1381893381E+01 Warning: maximum velocity exceeds speed of light 1 0.4143177151E+11 0.1382015137E+01 Warning: maximum velocity exceeds speed of light 1 0.4143538611E+11 0.1382135708E+01 Warning: maximum velocity exceeds speed of light 1 0.4143896551E+11 0.1382255104E+01 Warning: maximum velocity exceeds speed of light 1 0.4144251006E+11 0.1382373337E+01 Warning: maximum velocity exceeds speed of light 1 0.4144602009E+11 0.1382490419E+01 Warning: maximum velocity exceeds speed of light 1 0.4144949597E+11 0.1382606362E+01 Warning: maximum velocity exceeds speed of light 1 0.4145293807E+11 0.1382721178E+01 Warning: maximum velocity exceeds speed of light 1 0.4145634677E+11 0.1382834880E+01 3140 8.795825 1.159E+04 -15.825761 2.584064 51.730810 0.000000 0.000000 0.000000 0.217139 -3.221579 3319 27 -7.3428E+00 8.795825 2.724878 -25.469547 5.968133 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637045 4 2.8747E+05 4.075766 6.660260 2.584064 -23.219872 -13.029596 49.066765 0.000002 0.000000 0.371884 0.163E+04 lgRho_cntr log_rel_run_E_err -6.2220935670130384 rel_E_err 3.1915879863496856D-12 png/grid_003140.png/png k, q, energy_removed_layers before adjustment is 884 0.97952426031688744 9.2848966336529254E+049 k, q, energy_removed_layers after adjustment is 890 0.97823225888212473 9.3046374240995480E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11391.423828125000 max vel inside fraction of cutoff 2604.7369222743187 max c/cs inside fraction of cutoff 3.1171920402294444 average v/vesc outside cutoff 1.7579354497645607 Kinetic plus potential energy outside cutoff 9.3046374240995480E+049 mass inside cutoff 890 50.604746886315901 relax counter 0 log max v [km/s]= 5.6175910284240169 check gamma integral 4.9070090704735059E-002 Warning: maximum velocity exceeds speed of light 1 0.4145972248E+11 0.1382947482E+01 Warning: maximum velocity exceeds speed of light 1 0.4146306561E+11 0.1383058997E+01 Warning: maximum velocity exceeds speed of light 1 0.4146637659E+11 0.1383169439E+01 Warning: maximum velocity exceeds speed of light 1 0.4146965586E+11 0.1383278823E+01 Warning: maximum velocity exceeds speed of light 1 0.4147290385E+11 0.1383387165E+01 Warning: maximum velocity exceeds speed of light 1 0.4147612104E+11 0.1383494479E+01 Warning: maximum velocity exceeds speed of light 1 0.4147930788E+11 0.1383600780E+01 Warning: maximum velocity exceeds speed of light 1 0.4148246486E+11 0.1383706086E+01 Warning: maximum velocity exceeds speed of light 1 0.4148559247E+11 0.1383810411E+01 Warning: maximum velocity exceeds speed of light 1 0.4148869120E+11 0.1383913774E+01 3150 8.814001 1.147E+04 -15.695104 2.632466 51.730810 0.000000 0.000000 0.000000 0.217139 -3.174631 3338 27 -7.3675E+00 8.814001 2.731600 -25.099585 6.245212 -99.000000 51.730810 0.000000 0.059829 0.782861 0.635181 5 2.8747E+05 4.126476 6.656055 2.632466 -21.298398 -13.043043 49.066765 0.000002 0.000000 0.371884 0.164E+04 lgRho_cntr log_rel_run_E_err -6.2220702623369615 rel_E_err 3.2723144578578983D-12 save photos/x150 for model 3150 png/grid_003150.png/png k, q, energy_removed_layers before adjustment is 884 0.97952426031688755 9.2914368608118845E+049 k, q, energy_removed_layers after adjustment is 890 0.97823225888212484 9.3114033515659772E+049 Layers above q= 0.97823225888212484 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11405.310546875000 max vel inside fraction of cutoff 2836.9119056405252 max c/cs inside fraction of cutoff 3.1108516780374367 average v/vesc outside cutoff 1.7661080241575324 Kinetic plus potential energy outside cutoff 9.3114033515659772E+049 mass inside cutoff 890 50.604746886315908 relax counter 0 log max v [km/s]= 5.6179297348040107 check gamma integral 4.8520188489704262E-002 Warning: maximum velocity exceeds speed of light 1 0.4149176158E+11 0.1384016191E+01 Warning: maximum velocity exceeds speed of light 1 0.4149480414E+11 0.1384117680E+01 Warning: maximum velocity exceeds speed of light 1 0.4149781941E+11 0.1384218258E+01 Warning: maximum velocity exceeds speed of light 1 0.4150080794E+11 0.1384317945E+01 Warning: maximum velocity exceeds speed of light 1 0.4150377028E+11 0.1384416758E+01 Warning: maximum velocity exceeds speed of light 1 0.4150670699E+11 0.1384514716E+01 Warning: maximum velocity exceeds speed of light 1 0.4150961864E+11 0.1384611838E+01 Warning: maximum velocity exceeds speed of light 1 0.4151250578E+11 0.1384708143E+01 Warning: maximum velocity exceeds speed of light 1 0.4151536894E+11 0.1384803648E+01 Warning: maximum velocity exceeds speed of light 1 0.4151820866E+11 0.1384898371E+01 3160 8.832118 1.136E+04 -15.566351 2.680726 51.730810 0.000000 0.000000 0.000000 0.217139 -3.127938 3353 27 -7.3894E+00 8.832118 2.737880 -24.747520 6.543867 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633363 5 2.8747E+05 4.177093 6.652124 2.680726 -19.457820 -13.055606 49.066765 0.000002 0.000000 0.371884 0.165E+04 lgRho_cntr log_rel_run_E_err -6.2220452667049448 rel_E_err 3.5076859980289228D-12 png/grid_003160.png/png k, q, energy_removed_layers before adjustment is 885 0.97952426031688744 9.2974028887163739E+049 k, q, energy_removed_layers after adjustment is 891 0.97823225888212473 9.3175870847407211E+049 Layers above q= 0.97823225888212473 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11418.468750000000 max vel inside fraction of cutoff 3092.6466850523643 max c/cs inside fraction of cutoff 3.1046200401398085 average v/vesc outside cutoff 1.7737964834567794 Kinetic plus potential energy outside cutoff 9.3175870847407211E+049 mass inside cutoff 891 50.604746886315901 relax counter 0 log max v [km/s]= 5.6182386072409169 check gamma integral 4.7969185632428461E-002 Warning: maximum velocity exceeds speed of light 1 0.4152102544E+11 0.1384992328E+01 Warning: maximum velocity exceeds speed of light 1 0.4152381974E+11 0.1385085536E+01 Warning: maximum velocity exceeds speed of light 1 0.4152659204E+11 0.1385178010E+01 Warning: maximum velocity exceeds speed of light 1 0.4152934278E+11 0.1385269765E+01 Warning: maximum velocity exceeds speed of light 1 0.4153207235E+11 0.1385360814E+01 Warning: maximum velocity exceeds speed of light 1 0.4153478119E+11 0.1385451171E+01 Warning: maximum velocity exceeds speed of light 1 0.4153746968E+11 0.1385540849E+01 Warning: maximum velocity exceeds speed of light 1 0.4154013819E+11 0.1385629861E+01 Warning: maximum velocity exceeds speed of light 1 0.4154278710E+11 0.1385718219E+01 Warning: maximum velocity exceeds speed of light 1 0.4154541677E+11 0.1385805935E+01 3170 8.850169 1.126E+04 -15.439333 2.729805 51.730810 0.000000 0.000000 0.000000 0.217139 -3.081524 3356 27 -7.4072E+00 8.850169 2.743804 -24.380844 6.854812 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631590 5 2.8747E+05 4.227594 6.648414 2.729805 -17.694746 -13.067456 49.066765 0.000002 0.000000 0.371884 0.165E+04 lgRho_cntr log_rel_run_E_err -6.2220195861069776 rel_E_err 3.5577849524564867D-12 png/grid_003170.png/png k, q, energy_removed_layers before adjustment is 885 0.97928111249694849 9.3075553500584998E+049 k, q, energy_removed_layers after adjustment is 890 0.97823225888212462 9.3233027699061347E+049 Layers above q= 0.97823225888212462 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11431.048828125000 max vel inside fraction of cutoff 3368.7833339409949 max c/cs inside fraction of cutoff 3.3252762147989396 average v/vesc outside cutoff 1.7810973979982847 Kinetic plus potential energy outside cutoff 9.3233027699061347E+049 mass inside cutoff 890 50.604746886315901 relax counter 0 log max v [km/s]= 5.6185231200219521 check gamma integral 4.7413522073270431E-002 Warning: maximum velocity exceeds speed of light 1 0.4154802754E+11 0.1385893021E+01 Warning: maximum velocity exceeds speed of light 1 0.4155061975E+11 0.1385979488E+01 Warning: maximum velocity exceeds speed of light 1 0.4155319375E+11 0.1386065348E+01 Warning: maximum velocity exceeds speed of light 1 0.4155574985E+11 0.1386150610E+01 Warning: maximum velocity exceeds speed of light 1 0.4155828834E+11 0.1386235285E+01 Warning: maximum velocity exceeds speed of light 1 0.4156080952E+11 0.1386319382E+01 Warning: maximum velocity exceeds speed of light 1 0.4156331367E+11 0.1386402912E+01 Warning: maximum velocity exceeds speed of light 1 0.4156580109E+11 0.1386485883E+01 Warning: maximum velocity exceeds speed of light 1 0.4156827201E+11 0.1386568304E+01 Warning: maximum velocity exceeds speed of light 1 0.4157072666E+11 0.1386650183E+01 3180 8.868162 1.116E+04 -15.313936 2.783392 51.730810 0.000000 0.000000 0.000000 0.217139 -3.035359 3375 27 -7.4218E+00 8.868162 2.749441 -21.843647 7.170014 -99.000000 51.730810 0.000000 0.059829 0.782861 0.629865 5 2.8747E+05 4.278007 6.644881 2.783392 -16.004701 -13.078733 49.066765 0.000002 0.000000 0.371884 0.166E+04 lgRho_cntr log_rel_run_E_err -6.2219843379699604 rel_E_err 8.5094588249350147D-12 png/grid_003180.png/png k, q, energy_removed_layers before adjustment is 887 0.97928111249694838 9.3125907553408967E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212451 9.3285237547670078E+049 Layers above q= 0.97823225888212451 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11443.177734375000 max vel inside fraction of cutoff 3677.8343929527468 max c/cs inside fraction of cutoff 3.5813410802068302 average v/vesc outside cutoff 1.7880609126729137 Kinetic plus potential energy outside cutoff 9.3285237547670078E+049 mass inside cutoff 892 50.604746886315894 relax counter 0 log max v [km/s]= 5.6187876160819910 check gamma integral 4.6848833664531783E-002 Warning: maximum velocity exceeds speed of light 1 0.4157316533E+11 0.1386731528E+01 Warning: maximum velocity exceeds speed of light 1 0.4157558825E+11 0.1386812348E+01 Warning: maximum velocity exceeds speed of light 1 0.4157799570E+11 0.1386892651E+01 Warning: maximum velocity exceeds speed of light 1 0.4158038793E+11 0.1386972448E+01 Warning: maximum velocity exceeds speed of light 1 0.4158276525E+11 0.1387051747E+01 Warning: maximum velocity exceeds speed of light 1 0.4158511356E+11 0.1387130078E+01 Warning: maximum velocity exceeds speed of light 1 0.4158740822E+11 0.1387206619E+01 Warning: maximum velocity exceeds speed of light 1 0.4158964914E+11 0.1387281369E+01 Warning: maximum velocity exceeds speed of light 1 0.4159183968E+11 0.1387354437E+01 Warning: maximum velocity exceeds speed of light 1 0.4159397695E+11 0.1387425729E+01 3190 8.885737 1.108E+04 -15.192698 2.834974 51.730810 0.000000 0.000000 0.000000 0.217139 -2.990349 3399 27 -7.4672E+00 8.885737 2.754737 -18.856076 7.477155 -99.000000 51.730810 0.000000 0.059829 0.782861 0.628223 5 2.8747E+05 4.327332 6.641561 2.834974 -14.416396 -13.089328 49.066765 0.000002 0.000000 0.371884 0.167E+04 min_dr_div_cs log_rel_run_E_err -6.2219293481981834 rel_E_err 7.4416891403255749D-12 png/grid_003190.png/png k, q, energy_removed_layers before adjustment is 887 0.97928111249694838 9.3173374213332647E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212451 9.3334469442926376E+049 Layers above q= 0.97823225888212451 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11454.705078125000 max vel inside fraction of cutoff 3957.3394967766631 max c/cs inside fraction of cutoff 3.8608920622348983 average v/vesc outside cutoff 1.7946695560092214 Kinetic plus potential energy outside cutoff 9.3334469442926376E+049 mass inside cutoff 892 50.604746886315894 relax counter 0 log max v [km/s]= 5.6190304468299672 check gamma integral 4.6282519229980001E-002 Warning: maximum velocity exceeds speed of light 1 0.4159606589E+11 0.1387495408E+01 Warning: maximum velocity exceeds speed of light 1 0.4159810370E+11 0.1387563382E+01 Warning: maximum velocity exceeds speed of light 1 0.4160009765E+11 0.1387629893E+01 Warning: maximum velocity exceeds speed of light 1 0.4160205413E+11 0.1387695154E+01 Warning: maximum velocity exceeds speed of light 1 0.4160397072E+11 0.1387759085E+01 Warning: maximum velocity exceeds speed of light 1 0.4160584451E+11 0.1387821588E+01 Warning: maximum velocity exceeds speed of light 1 0.4160764476E+11 0.1387881638E+01 Warning: maximum velocity exceeds speed of light 1 0.4160934322E+11 0.1387938292E+01 Warning: maximum velocity exceeds speed of light 1 0.4161095565E+11 0.1387992077E+01 Warning: maximum velocity exceeds speed of light 1 0.4161251012E+11 0.1388043929E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 8.900433 1.100E+04 -15.092300 2.879305 51.730810 0.000000 0.000000 0.000000 0.217139 -2.952742 3400 27 -7.5933E+00 8.900433 2.759045 -16.834300 7.730672 -99.000000 51.730810 0.000000 0.059829 0.782861 0.626889 5 2.8747E+05 4.368650 6.638866 2.879305 -13.134153 -13.097946 49.066765 0.000002 0.000000 0.371884 0.167E+04 min_dr_div_cs log_rel_run_E_err -6.2218872290873835 rel_E_err 5.2677694253460595D-12 save LOGS/profile18.data for model 3200 save photos/x200 for model 3200 png/grid_003200.png/png k, q, energy_removed_layers before adjustment is 887 0.97928111249694838 9.3210497178645109E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212451 9.3373037199446302E+049 Layers above q= 0.97823225888212451 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11464.185546875000 max vel inside fraction of cutoff 4184.3058406585778 max c/cs inside fraction of cutoff 4.0957662088420834 average v/vesc outside cutoff 1.8000596234683395 Kinetic plus potential energy outside cutoff 9.3373037199446302E+049 mass inside cutoff 892 50.604746886315894 relax counter 0 log max v [km/s]= 5.6192239137998641 check gamma integral 4.5794028793067106E-002 Warning: maximum velocity exceeds speed of light 1 0.4161402385E+11 0.1388094421E+01 Warning: maximum velocity exceeds speed of light 1 0.4161550691E+11 0.1388143891E+01 Warning: maximum velocity exceeds speed of light 1 0.4161696739E+11 0.1388192607E+01 Warning: maximum velocity exceeds speed of light 1 0.4161841035E+11 0.1388240739E+01 Warning: maximum velocity exceeds speed of light 1 0.4162013720E+11 0.1388298341E+01 Warning: maximum velocity exceeds speed of light 1 0.4162220266E+11 0.1388367237E+01 Warning: maximum velocity exceeds speed of light 1 0.4162392935E+11 0.1388424833E+01 Warning: maximum velocity exceeds speed of light 1 0.4162551614E+11 0.1388477763E+01 Warning: maximum velocity exceeds speed of light 1 0.4162703750E+11 0.1388528510E+01 Warning: maximum velocity exceeds speed of light 1 0.4162852135E+11 0.1388578006E+01 3210 8.913542 1.094E+04 -15.003454 2.919971 51.730810 0.000000 0.000000 0.000000 0.217139 -2.919212 3414 27 -7.6025E+00 8.913542 2.762833 -15.361257 7.953263 -99.000000 51.730810 0.000000 0.059829 0.782861 0.625730 5 2.8747E+05 4.405568 6.636499 2.919971 -12.024333 -13.105524 49.066765 0.000002 0.000000 0.371884 0.168E+04 min_dr_div_cs log_rel_run_E_err -6.2192832134938945 rel_E_err 2.6989708659470259D-10 png/grid_003210.png/png k, q, energy_removed_layers before adjustment is 887 0.97928111249694838 9.3243424125851705E+049 k, q, energy_removed_layers after adjustment is 892 0.97823225888212451 9.3407236565369113E+049 Layers above q= 0.97823225888212451 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11472.591796875000 max vel inside fraction of cutoff 4328.9605047418027 max c/cs inside fraction of cutoff 4.2604945210206404 average v/vesc outside cutoff 1.8048328682929691 Kinetic plus potential energy outside cutoff 9.3407236565369113E+049 mass inside cutoff 892 50.604746886315894 relax counter 0 log max v [km/s]= 5.6193909850213002 check gamma integral 4.5342098154134411E-002 Warning: maximum velocity exceeds speed of light 1 0.4162997091E+11 0.1388626358E+01 Warning: maximum velocity exceeds speed of light 1 0.4163138240E+11 0.1388673440E+01 Warning: maximum velocity exceeds speed of light 1 0.4163276196E+11 0.1388719457E+01 Warning: maximum velocity exceeds speed of light 1 0.4163411911E+11 0.1388764727E+01 Warning: maximum velocity exceeds speed of light 1 0.4163546025E+11 0.1388809463E+01 Warning: maximum velocity exceeds speed of light 1 0.4163678639E+11 0.1388853698E+01 Warning: maximum velocity exceeds speed of light 1 0.4163809845E+11 0.1388897464E+01 Warning: maximum velocity exceeds speed of light 1 0.4163966886E+11 0.1388949847E+01 Warning: maximum velocity exceeds speed of light 1 0.4164154751E+11 0.1389012512E+01 Warning: maximum velocity exceeds speed of light 1 0.4164322942E+11 0.1389068614E+01 3220 8.925822 1.088E+04 -14.920628 2.959753 51.730810 0.000000 0.000000 0.000000 0.217139 -2.887807 3429 27 -7.5377E+00 8.925822 2.766371 -14.143012 8.158641 -99.000000 51.730810 0.000000 0.059829 0.782861 0.624673 5 2.8747E+05 4.440204 6.634292 2.959753 -11.012323 -13.112601 49.066765 0.000002 0.000000 0.371884 0.169E+04 min_dr_div_cs log_rel_run_E_err -6.2147289119226494 rel_E_err 2.8264330568833002D-09 png/grid_003220.png/png k, q, energy_removed_layers before adjustment is 888 0.97928111249694838 9.3272649095984618E+049 k, q, energy_removed_layers after adjustment is 894 0.97790656330742898 9.3437825698217850E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11480.509765625000 max vel inside fraction of cutoff 4413.2812830360917 max c/cs inside fraction of cutoff 4.4001443692197197 average v/vesc outside cutoff 1.7911560946797398 Kinetic plus potential energy outside cutoff 9.3437825698217850E+049 mass inside cutoff 894 50.587898390501309 relax counter 0 log max v [km/s]= 5.6195444015364000 check gamma integral 4.4900788335758765E-002 Warning: maximum velocity exceeds speed of light 1 0.4164524096E+11 0.1389135712E+01 Warning: maximum velocity exceeds speed of light 1 0.4164764511E+11 0.1389215906E+01 Warning: maximum velocity exceeds speed of light 1 0.4164970185E+11 0.1389284511E+01 Warning: maximum velocity exceeds speed of light 1 0.4165160106E+11 0.1389347862E+01 Warning: maximum velocity exceeds speed of light 1 0.4165337563E+11 0.1389407055E+01 Warning: maximum velocity exceeds speed of light 1 0.4165498479E+11 0.1389460731E+01 Warning: maximum velocity exceeds speed of light 1 0.4165645175E+11 0.1389509664E+01 Warning: maximum velocity exceeds speed of light 1 0.4165783218E+11 0.1389555710E+01 Warning: maximum velocity exceeds speed of light 1 0.4165916291E+11 0.1389600098E+01 Warning: maximum velocity exceeds speed of light 1 0.4166047411E+11 0.1389643835E+01 3230 8.940452 1.081E+04 -14.822599 3.010920 51.730810 0.000000 0.000000 0.000000 0.217139 -2.850399 3452 27 -7.6331E+00 8.940452 2.770595 -12.947478 8.398558 -99.000000 51.730810 0.000000 0.059829 0.782861 0.623448 6 2.8747E+05 4.481537 6.631664 3.010920 -9.840644 -13.121053 49.066765 0.000002 0.000000 0.371884 0.169E+04 min_dr_div_cs log_rel_run_E_err -6.1945486352396726 rel_E_err 4.9070607646450360D-12 png/grid_003230.png/png k, q, energy_removed_layers before adjustment is 888 0.97928111249694838 9.3308402112729133E+049 k, q, energy_removed_layers after adjustment is 896 0.97790656330742898 9.3472853000228507E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11490.044921875000 max vel inside fraction of cutoff 4535.8530146084013 max c/cs inside fraction of cutoff 4.5134240479056107 average v/vesc outside cutoff 1.7964276905914871 Kinetic plus potential energy outside cutoff 9.3472853000228507E+049 mass inside cutoff 896 50.587898390501309 relax counter 0 log max v [km/s]= 5.6197242080639320 check gamma integral 4.4351310139270184E-002 Warning: maximum velocity exceeds speed of light 1 0.4166204328E+11 0.1389696177E+01 Warning: maximum velocity exceeds speed of light 1 0.4166392016E+11 0.1389758783E+01 Warning: maximum velocity exceeds speed of light 1 0.4166541774E+11 0.1389808737E+01 Warning: maximum velocity exceeds speed of light 1 0.4166664154E+11 0.1389849559E+01 Warning: maximum velocity exceeds speed of light 1 0.4166776652E+11 0.1389887084E+01 Warning: maximum velocity exceeds speed of light 1 0.4166883183E+11 0.1389922619E+01 Warning: maximum velocity exceeds speed of light 1 0.4166983969E+11 0.1389956237E+01 Warning: maximum velocity exceeds speed of light 1 0.4167080064E+11 0.1389988291E+01 Warning: maximum velocity exceeds speed of light 1 0.4167174014E+11 0.1390019630E+01 Warning: maximum velocity exceeds speed of light 1 0.4167286530E+11 0.1390057161E+01 3240 8.951078 1.076E+04 -14.752177 3.052209 51.730810 0.000000 0.000000 0.000000 0.217139 -2.823178 3455 27 -7.6901E+00 8.951078 2.773683 -12.166682 8.568549 -99.000000 51.730810 0.000000 0.059829 0.782861 0.622592 6 2.8747E+05 4.511624 6.629752 3.052209 -9.013454 -13.127230 49.066765 0.000002 0.000000 0.371884 0.170E+04 max increase log_rel_run_E_err -6.1674910201338271 rel_E_err 1.4330411758411213D-11 png/grid_003240.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3333257386697891E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3498863239571215E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11497.072265625000 max vel inside fraction of cutoff 4631.7597572418454 max c/cs inside fraction of cutoff 4.6381382600106535 average v/vesc outside cutoff 1.8002992768480233 Kinetic plus potential energy outside cutoff 9.3498863239571215E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6198533622926163 check gamma integral 4.3935749746649350E-002 Warning: maximum velocity exceeds speed of light 1 0.4167421226E+11 0.1390102091E+01 Warning: maximum velocity exceeds speed of light 1 0.4167534268E+11 0.1390139797E+01 Warning: maximum velocity exceeds speed of light 1 0.4167639711E+11 0.1390174969E+01 Warning: maximum velocity exceeds speed of light 1 0.4167743081E+11 0.1390209450E+01 Warning: maximum velocity exceeds speed of light 1 0.4167843559E+11 0.1390242966E+01 Warning: maximum velocity exceeds speed of light 1 0.4167942284E+11 0.1390275897E+01 Warning: maximum velocity exceeds speed of light 1 0.4168060500E+11 0.1390315329E+01 Warning: maximum velocity exceeds speed of light 1 0.4168201996E+11 0.1390362527E+01 Warning: maximum velocity exceeds speed of light 1 0.4168321032E+11 0.1390402233E+01 Warning: maximum velocity exceeds speed of light 1 0.4168432976E+11 0.1390439574E+01 3250 8.960831 1.072E+04 -14.688049 3.094552 51.730810 0.000000 0.000000 0.000000 0.217139 -2.798147 3466 27 -7.6834E+00 8.960831 2.776582 -11.577419 8.721481 -99.000000 51.730810 0.000000 0.059829 0.782861 0.621832 6 2.8747E+05 4.539292 6.627963 3.094552 -8.271211 -13.133029 49.066765 0.000002 0.000000 0.371884 0.170E+04 min_dr_div_cs log_rel_run_E_err -6.1607794200565431 rel_E_err 5.0632206498009955D-12 save photos/x250 for model 3250 png/grid_003250.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3357246971251269E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3523900380521646E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11503.708984375000 max vel inside fraction of cutoff 4670.1331732244125 max c/cs inside fraction of cutoff 4.7159793943787554 average v/vesc outside cutoff 1.8039573352082956 Kinetic plus potential energy outside cutoff 9.3523900380521646E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6199728229163695 check gamma integral 4.3538288214734239E-002 Warning: maximum velocity exceeds speed of light 1 0.4168543338E+11 0.1390476387E+01 Warning: maximum velocity exceeds speed of light 1 0.4168650844E+11 0.1390512247E+01 Warning: maximum velocity exceeds speed of light 1 0.4168754478E+11 0.1390546816E+01 Warning: maximum velocity exceeds speed of light 1 0.4168855546E+11 0.1390580528E+01 Warning: maximum velocity exceeds speed of light 1 0.4168955872E+11 0.1390613994E+01 Warning: maximum velocity exceeds speed of light 1 0.4169075998E+11 0.1390654063E+01 Warning: maximum velocity exceeds speed of light 1 0.4169219764E+11 0.1390702018E+01 Warning: maximum velocity exceeds speed of light 1 0.4169339120E+11 0.1390741831E+01 Warning: maximum velocity exceeds speed of light 1 0.4169450475E+11 0.1390778975E+01 Warning: maximum velocity exceeds speed of light 1 0.4169553173E+11 0.1390813232E+01 3260 8.970045 1.067E+04 -14.627683 3.139602 51.730810 0.000000 0.000000 0.000000 0.217139 -2.774450 3486 27 -7.7118E+00 8.970045 2.779455 -11.067729 8.863717 -99.000000 51.730810 0.000000 0.059829 0.782861 0.621137 6 2.8747E+05 4.565478 6.626198 3.139602 -7.583858 -13.138776 49.066765 0.000002 0.000000 0.371884 0.170E+04 min_dr_div_cs log_rel_run_E_err -6.1581452213276959 rel_E_err 3.6072648559579112D-10 png/grid_003260.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3380799912885391E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3548451100337493E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11510.332031250000 max vel inside fraction of cutoff 4720.7884259663961 max c/cs inside fraction of cutoff 4.7649614213211935 average v/vesc outside cutoff 1.8075944623604800 Kinetic plus potential energy outside cutoff 9.3548451100337493E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6200895166681644 check gamma integral 4.3144441273047708E-002 Warning: maximum velocity exceeds speed of light 1 0.4169641943E+11 0.1390842842E+01 Warning: maximum velocity exceeds speed of light 1 0.4169721005E+11 0.1390869214E+01 Warning: maximum velocity exceeds speed of light 1 0.4169795857E+11 0.1390894182E+01 Warning: maximum velocity exceeds speed of light 1 0.4169869098E+11 0.1390918613E+01 Warning: maximum velocity exceeds speed of light 1 0.4169941020E+11 0.1390942604E+01 Warning: maximum velocity exceeds speed of light 1 0.4170011956E+11 0.1390966265E+01 Warning: maximum velocity exceeds speed of light 1 0.4170096942E+11 0.1390994613E+01 Warning: maximum velocity exceeds speed of light 1 0.4170198728E+11 0.1391028565E+01 Warning: maximum velocity exceeds speed of light 1 0.4170284517E+11 0.1391057181E+01 Warning: maximum velocity exceeds speed of light 1 0.4170364404E+11 0.1391083829E+01 3270 8.976391 1.064E+04 -14.586220 3.173959 51.730810 0.000000 0.000000 0.000000 0.217139 -2.758082 3478 27 -7.8142E+00 8.976391 2.781561 -10.681694 8.960371 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620675 6 2.8747E+05 4.583548 6.624908 3.173959 -7.118069 -13.142990 49.068983 0.000002 0.000000 0.371884 0.171E+04 min_dr_div_cs log_rel_run_E_err -6.1564226543130403 rel_E_err 5.9454385886404990D-11 png/grid_003270.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3397936184301795E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3566290749603184E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11515.214843750000 max vel inside fraction of cutoff 4762.1954181552746 max c/cs inside fraction of cutoff 4.8470914282527753 average v/vesc outside cutoff 1.8102682641690724 Kinetic plus potential energy outside cutoff 9.3566290749603184E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6201740050739017 check gamma integral 4.2861241457054916E-002 Warning: maximum velocity exceeds speed of light 1 0.4170442563E+11 0.1391109900E+01 Warning: maximum velocity exceeds speed of light 1 0.4170518534E+11 0.1391135241E+01 Warning: maximum velocity exceeds speed of light 1 0.4170591621E+11 0.1391159620E+01 Warning: maximum velocity exceeds speed of light 1 0.4170663051E+11 0.1391183447E+01 Warning: maximum velocity exceeds speed of light 1 0.4170748625E+11 0.1391211991E+01 Warning: maximum velocity exceeds speed of light 1 0.4170851111E+11 0.1391246177E+01 Warning: maximum velocity exceeds speed of light 1 0.4170973802E+11 0.1391287102E+01 Warning: maximum velocity exceeds speed of light 1 0.4171080303E+11 0.1391322627E+01 Warning: maximum velocity exceeds speed of light 1 0.4171181587E+11 0.1391356412E+01 Warning: maximum velocity exceeds speed of light 1 0.4171280731E+11 0.1391389483E+01 3280 8.983088 1.060E+04 -14.542781 3.213350 51.730810 0.000000 0.000000 0.000000 0.217139 -2.740774 3462 27 -7.7127E+00 8.983088 2.783968 -10.314975 9.060639 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620201 6 2.8747E+05 4.602643 6.623438 3.213350 -6.633923 -13.147805 49.068983 0.000002 0.000000 0.371884 0.171E+04 min_dr_div_cs log_rel_run_E_err -6.1509455028935180 rel_E_err 4.2191484597916442D-10 png/grid_003280.png/png k, q, energy_removed_layers before adjustment is 890 0.97928111249694838 9.3416520800566365E+049 k, q, energy_removed_layers after adjustment is 898 0.97790656330742898 9.3585646185487795E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11520.820312500000 max vel inside fraction of cutoff 4754.4485251581846 max c/cs inside fraction of cutoff 4.8573877570221438 average v/vesc outside cutoff 1.8133182911050816 Kinetic plus potential energy outside cutoff 9.3585646185487795E+049 mass inside cutoff 898 50.587898390501309 relax counter 0 log max v [km/s]= 5.6202694192831766 check gamma integral 4.2551936091478379E-002 Warning: maximum velocity exceeds speed of light 1 0.4171376611E+11 0.1391421465E+01 Warning: maximum velocity exceeds speed of light 1 0.4171468955E+11 0.1391452268E+01 Warning: maximum velocity exceeds speed of light 1 0.4171559009E+11 0.1391482306E+01 Warning: maximum velocity exceeds speed of light 1 0.4171666844E+11 0.1391518276E+01 Warning: maximum velocity exceeds speed of light 1 0.4171795915E+11 0.1391561330E+01 Warning: maximum velocity exceeds speed of light 1 0.4171903045E+11 0.1391597065E+01 Warning: maximum velocity exceeds speed of light 1 0.4172003361E+11 0.1391630526E+01 Warning: maximum velocity exceeds speed of light 1 0.4172102014E+11 0.1391663433E+01 Warning: maximum velocity exceeds speed of light 1 0.4172196927E+11 0.1391695093E+01 Warning: maximum velocity exceeds speed of light 1 0.4172287783E+11 0.1391725399E+01 3290 8.989603 1.055E+04 -14.501108 3.255175 51.730810 0.000000 0.000000 0.000000 0.217139 -2.723893 3454 27 -7.7420E+00 8.989603 2.786649 -9.944780 9.155885 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619754 6 2.8747E+05 4.621248 6.621806 3.255175 -6.171154 -13.153168 49.075594 0.000002 0.000000 0.371884 0.171E+04 min_dr_div_cs log_rel_run_E_err -6.1485182647524201 rel_E_err 5.2180561044059144D-12 png/grid_003290.png/png k, q, energy_removed_layers before adjustment is 891 0.97928111249694838 9.3437924785467277E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742898 9.3607864685818997E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11527.099609375000 max vel inside fraction of cutoff 4779.1869173308196 max c/cs inside fraction of cutoff 4.9056944491717056 average v/vesc outside cutoff 1.8167336102486453 Kinetic plus potential energy outside cutoff 9.3607864685818997E+049 mass inside cutoff 899 50.587898390501309 relax counter 0 log max v [km/s]= 5.6203742561509609 check gamma integral 4.2240486994259849E-002 Warning: maximum velocity exceeds speed of light 1 0.4172396571E+11 0.1391761687E+01 Warning: maximum velocity exceeds speed of light 1 0.4172526774E+11 0.1391805118E+01 Warning: maximum velocity exceeds speed of light 1 0.4172682523E+11 0.1391857070E+01 Warning: maximum velocity exceeds speed of light 1 0.4172806807E+11 0.1391898527E+01 Warning: maximum velocity exceeds speed of light 1 0.4172906033E+11 0.1391931625E+01 Warning: maximum velocity exceeds speed of light 1 0.4172987556E+11 0.1391958818E+01 Warning: maximum velocity exceeds speed of light 1 0.4173060251E+11 0.1391983067E+01 Warning: maximum velocity exceeds speed of light 1 0.4173127340E+11 0.1392005445E+01 Warning: maximum velocity exceeds speed of light 1 0.4173190985E+11 0.1392026675E+01 Warning: maximum velocity exceeds speed of light 1 0.4173252982E+11 0.1392047355E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 8.994531 1.051E+04 -14.469762 3.290563 51.730810 0.000000 0.000000 0.000000 0.217139 -2.711088 3474 27 -7.8994E+00 8.994531 2.789255 -9.594169 9.227058 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619426 6 2.8747E+05 4.635343 6.620224 3.290563 -5.825773 -13.158381 49.075594 0.000002 0.000000 0.371884 0.172E+04 min_dr_div_cs log_rel_run_E_err -6.1428725547700669 rel_E_err 5.4848114038329025D-12 save LOGS/profile19.data for model 3300 save photos/x300 for model 3300 png/grid_003300.png/png k, q, energy_removed_layers before adjustment is 891 0.97928111249694838 9.3458645557412426E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742898 9.3629350974902625E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11533.240234375000 max vel inside fraction of cutoff 4811.9593767359574 max c/cs inside fraction of cutoff 4.9803199306004053 average v/vesc outside cutoff 1.8200691539191409 Kinetic plus potential energy outside cutoff 9.3629350974902625E+049 mass inside cutoff 899 50.587898390501309 relax counter 0 log max v [km/s]= 5.6204747123794743 check gamma integral 4.1989302130010980E-002 Warning: maximum velocity exceeds speed of light 1 0.4173327264E+11 0.1392072133E+01 Warning: maximum velocity exceeds speed of light 1 0.4173416238E+11 0.1392101811E+01 Warning: maximum velocity exceeds speed of light 1 0.4173522770E+11 0.1392137347E+01 Warning: maximum velocity exceeds speed of light 1 0.4173650268E+11 0.1392179875E+01 Warning: maximum velocity exceeds speed of light 1 0.4173802777E+11 0.1392230747E+01 Warning: maximum velocity exceeds speed of light 1 0.4173933334E+11 0.1392274296E+01 Warning: maximum velocity exceeds speed of light 1 0.4174053256E+11 0.1392314298E+01 Warning: maximum velocity exceeds speed of light 1 0.4174166636E+11 0.1392352117E+01 Warning: maximum velocity exceeds speed of light 1 0.4174274999E+11 0.1392388263E+01 Warning: maximum velocity exceeds speed of light 1 0.4174380201E+11 0.1392423355E+01 3310 8.998036 1.047E+04 -14.446812 3.321390 51.730810 0.000000 0.000000 0.000000 0.217139 -2.701959 3494 27 -7.6595E+00 8.998036 2.792346 -9.238765 9.279214 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619200 6 2.8747E+05 4.645379 6.618351 3.321390 -5.579882 -13.164565 49.075594 0.000002 0.000000 0.371884 0.172E+04 min_dr_div_cs log_rel_run_E_err -6.1272148286185200 rel_E_err 5.4324312580261380D-09 png/grid_003310.png/png k, q, energy_removed_layers before adjustment is 892 0.97928111249694838 9.3481967119845150E+049 k, q, energy_removed_layers after adjustment is 900 0.97790656330742898 9.3653629275479896E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11540.568359375000 max vel inside fraction of cutoff 4774.6018819287847 max c/cs inside fraction of cutoff 4.9760029961658514 average v/vesc outside cutoff 1.8240277484767458 Kinetic plus potential energy outside cutoff 9.3653629275479896E+049 mass inside cutoff 900 50.587898390501309 relax counter 0 log max v [km/s]= 5.6205920019602100 check gamma integral 4.1779232831784252E-002 Warning: maximum velocity exceeds speed of light 1 0.4174483837E+11 0.1392457924E+01 Warning: maximum velocity exceeds speed of light 1 0.4174607871E+11 0.1392499297E+01 Warning: maximum velocity exceeds speed of light 1 0.4174756235E+11 0.1392548786E+01 Warning: maximum velocity exceeds speed of light 1 0.4174879569E+11 0.1392589926E+01 Warning: maximum velocity exceeds speed of light 1 0.4174995756E+11 0.1392628682E+01 Warning: maximum velocity exceeds speed of light 1 0.4175109634E+11 0.1392666667E+01 Warning: maximum velocity exceeds speed of light 1 0.4175212137E+11 0.1392700859E+01 Warning: maximum velocity exceeds speed of light 1 0.4175303683E+11 0.1392731395E+01 Warning: maximum velocity exceeds speed of light 1 0.4175391354E+11 0.1392760639E+01 Warning: maximum velocity exceeds speed of light 1 0.4175476385E+11 0.1392789002E+01 3320 8.999073 1.042E+04 -14.439220 3.337276 51.730810 0.000000 0.000000 0.000000 0.217139 -2.699253 3481 27 -7.7416E+00 8.999073 2.795403 -8.929578 9.296965 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619134 7 2.8747E+05 4.648352 6.616510 3.337276 -5.504648 -13.170680 49.075594 0.000002 0.000000 0.371884 0.172E+04 min_dr_div_cs log_rel_run_E_err -6.1216886547905158 rel_E_err 5.1989635540727561D-12 png/grid_003320.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3505847638668265E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3678483812996581E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11547.861328125000 max vel inside fraction of cutoff 4792.8030600954480 max c/cs inside fraction of cutoff 5.0398921517061410 average v/vesc outside cutoff 1.8279685813825244 Kinetic plus potential energy outside cutoff 9.3678483812996581E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6207060318300845 check gamma integral 4.1678322561864482E-002 Warning: maximum velocity exceeds speed of light 1 0.4175578192E+11 0.1392822962E+01 Warning: maximum velocity exceeds speed of light 1 0.4175700029E+11 0.1392863602E+01 Warning: maximum velocity exceeds speed of light 1 0.4175801436E+11 0.1392897428E+01 Warning: maximum velocity exceeds speed of light 1 0.4175896889E+11 0.1392929267E+01 Warning: maximum velocity exceeds speed of light 1 0.4175990072E+11 0.1392960350E+01 Warning: maximum velocity exceeds speed of light 1 0.4176078240E+11 0.1392989760E+01 Warning: maximum velocity exceeds speed of light 1 0.4176162153E+11 0.1393017750E+01 Warning: maximum velocity exceeds speed of light 1 0.4176244091E+11 0.1393045082E+01 Warning: maximum velocity exceeds speed of light 1 0.4176325341E+11 0.1393072184E+01 Warning: maximum velocity exceeds speed of light 1 0.4176406277E+11 0.1393099181E+01 3330 8.998394 1.038E+04 -14.443018 3.338538 51.730810 0.000000 0.000000 0.000000 0.217139 -2.701026 3487 27 -7.7539E+00 8.998394 2.798038 -8.667936 9.288965 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619177 7 2.8747E+05 4.646405 6.614917 3.338538 -5.549833 -13.175952 49.075594 0.000002 0.000000 0.371884 0.173E+04 min_dr_div_cs log_rel_run_E_err -6.1199603011554133 rel_E_err 1.2872444801765952D-11 png/grid_003330.png/png k, q, energy_removed_layers before adjustment is 889 0.97928111249694838 9.3526260395922386E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3699736259361271E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11554.193359375000 max vel inside fraction of cutoff 4782.3970024021910 max c/cs inside fraction of cutoff 5.0678131009905050 average v/vesc outside cutoff 1.8313764817033442 Kinetic plus potential energy outside cutoff 9.3699736259361271E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6208027397808893 check gamma integral 4.1673851320172414E-002 Warning: maximum velocity exceeds speed of light 1 0.4176503184E+11 0.1393131506E+01 Warning: maximum velocity exceeds speed of light 1 0.4176619163E+11 0.1393170192E+01 Warning: maximum velocity exceeds speed of light 1 0.4176717405E+11 0.1393202962E+01 Warning: maximum velocity exceeds speed of light 1 0.4176811061E+11 0.1393234202E+01 Warning: maximum velocity exceeds speed of light 1 0.4176903424E+11 0.1393265011E+01 Warning: maximum velocity exceeds speed of light 1 0.4176991563E+11 0.1393294411E+01 Warning: maximum velocity exceeds speed of light 1 0.4177076108E+11 0.1393322612E+01 Warning: maximum velocity exceeds speed of light 1 0.4177159099E+11 0.1393350295E+01 Warning: maximum velocity exceeds speed of light 1 0.4177241565E+11 0.1393377803E+01 Warning: maximum velocity exceeds speed of light 1 0.4177323765E+11 0.1393405222E+01 3340 8.996509 1.034E+04 -14.454871 3.327708 51.730810 0.000000 0.000000 0.000000 0.217139 -2.705944 3504 27 -7.7379E+00 8.996509 2.800678 -8.437195 9.262623 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619297 7 2.8747E+05 4.641004 6.613321 3.327708 -5.680074 -13.181233 49.075594 0.000002 0.000000 0.371884 0.173E+04 min_dr_div_cs log_rel_run_E_err -6.1143516242091502 rel_E_err 4.0907534155195882D-10 png/grid_003340.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3589903121096888E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3720852029686852E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11560.572265625000 max vel inside fraction of cutoff 4762.1503079566155 max c/cs inside fraction of cutoff 5.0690513359028726 average v/vesc outside cutoff 1.8348011561522941 Kinetic plus potential energy outside cutoff 9.3720852029686852E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6208981367524782 check gamma integral 4.1737778685667547E-002 Warning: maximum velocity exceeds speed of light 1 0.4177422176E+11 0.1393438048E+01 Warning: maximum velocity exceeds speed of light 1 0.4177539938E+11 0.1393477329E+01 Warning: maximum velocity exceeds speed of light 1 0.4177638107E+11 0.1393510075E+01 Warning: maximum velocity exceeds speed of light 1 0.4177730625E+11 0.1393540936E+01 Warning: maximum velocity exceeds speed of light 1 0.4177821024E+11 0.1393571090E+01 Warning: maximum velocity exceeds speed of light 1 0.4177906294E+11 0.1393599533E+01 Warning: maximum velocity exceeds speed of light 1 0.4177986878E+11 0.1393626413E+01 Warning: maximum velocity exceeds speed of light 1 0.4178064315E+11 0.1393652243E+01 Warning: maximum velocity exceeds speed of light 1 0.4178139439E+11 0.1393677302E+01 Warning: maximum velocity exceeds speed of light 1 0.4178212957E+11 0.1393701825E+01 3350 8.993638 1.029E+04 -14.473135 3.305967 51.730810 0.000000 0.000000 0.000000 0.217139 -2.713429 3506 27 -7.7770E+00 8.993638 2.803277 -8.245478 9.221485 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619481 7 2.8747E+05 4.632779 6.611741 3.305967 -5.880131 -13.186432 49.075594 0.000002 0.000000 0.371884 0.174E+04 min_dr_div_cs log_rel_run_E_err -6.1037739090243566 rel_E_err 6.3971710579445514D-10 save photos/x350 for model 3350 png/grid_003350.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3609935648329437E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3741453519033768E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11566.886718750000 max vel inside fraction of cutoff 4737.2917552177614 max c/cs inside fraction of cutoff 5.0824389285208591 average v/vesc outside cutoff 1.8381824675801510 Kinetic plus potential energy outside cutoff 9.3741453519033768E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6209905715713999 check gamma integral 4.1856996353761382E-002 Warning: maximum velocity exceeds speed of light 1 0.4178285351E+11 0.1393725973E+01 Warning: maximum velocity exceeds speed of light 1 0.4178357158E+11 0.1393749925E+01 Warning: maximum velocity exceeds speed of light 1 0.4178443143E+11 0.1393778606E+01 Warning: maximum velocity exceeds speed of light 1 0.4178546063E+11 0.1393812937E+01 Warning: maximum velocity exceeds speed of light 1 0.4178631635E+11 0.1393841480E+01 Warning: maximum velocity exceeds speed of light 1 0.4178712224E+11 0.1393868362E+01 Warning: maximum velocity exceeds speed of light 1 0.4178790965E+11 0.1393894627E+01 Warning: maximum velocity exceeds speed of light 1 0.4178865539E+11 0.1393919502E+01 Warning: maximum velocity exceeds speed of light 1 0.4178954828E+11 0.1393949286E+01 Warning: maximum velocity exceeds speed of light 1 0.4179061685E+11 0.1393984930E+01 3360 8.990066 1.026E+04 -14.496020 3.276970 51.730810 0.000000 0.000000 0.000000 0.217139 -2.722730 3500 27 -7.6054E+00 8.990066 2.805797 -8.072769 9.169323 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619715 9 2.8747E+05 4.622555 6.610217 3.276970 -6.131063 -13.191473 49.075594 0.000002 0.000000 0.371884 0.174E+04 min_dr_div_cs log_rel_run_E_err -6.0945226941665620 rel_E_err 4.2637388834010225D-10 png/grid_003360.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3629196262994028E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3761245476082137E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11573.046875000000 max vel inside fraction of cutoff 4706.9639252132847 max c/cs inside fraction of cutoff 5.0872476910292335 average v/vesc outside cutoff 1.8414703156042944 Kinetic plus potential energy outside cutoff 9.3761245476082137E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6210787816263759 check gamma integral 4.2016369549574835E-002 Warning: maximum velocity exceeds speed of light 1 0.4179154634E+11 0.1394015934E+01 Warning: maximum velocity exceeds speed of light 1 0.4179235238E+11 0.1394042821E+01 Warning: maximum velocity exceeds speed of light 1 0.4179301251E+11 0.1394064840E+01 Warning: maximum velocity exceeds speed of light 1 0.4179359953E+11 0.1394084421E+01 Warning: maximum velocity exceeds speed of light 1 0.4179415538E+11 0.1394102962E+01 Warning: maximum velocity exceeds speed of light 1 0.4179468989E+11 0.1394120792E+01 Warning: maximum velocity exceeds speed of light 1 0.4179533026E+11 0.1394142152E+01 Warning: maximum velocity exceeds speed of light 1 0.4179609718E+11 0.1394167734E+01 Warning: maximum velocity exceeds speed of light 1 0.4179674244E+11 0.1394189257E+01 Warning: maximum velocity exceeds speed of light 1 0.4179734940E+11 0.1394209503E+01 3370 8.986744 1.022E+04 -14.517749 3.250129 51.730810 0.000000 0.000000 0.000000 0.217139 -2.731366 3499 27 -7.8436E+00 8.986744 2.807824 -7.944214 9.119388 -99.000000 51.730810 0.000000 0.059829 0.782861 0.619937 8 2.8747E+05 4.613053 6.608994 3.250129 -6.367607 -13.195528 49.075594 0.000002 0.000000 0.371884 0.174E+04 min_dr_div_cs log_rel_run_E_err -6.0772310514845582 rel_E_err 1.6054780367720339D-11 png/grid_003370.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3644572418545409E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3777031873530105E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11578.027343750000 max vel inside fraction of cutoff 4711.0302783464895 max c/cs inside fraction of cutoff 5.1363484197985851 average v/vesc outside cutoff 1.8441217444477707 Kinetic plus potential energy outside cutoff 9.3777031873530105E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6211487415999608 check gamma integral 4.2171098475282796E-002 Warning: maximum velocity exceeds speed of light 1 0.4179793584E+11 0.1394229065E+01 Warning: maximum velocity exceeds speed of light 1 0.4179848324E+11 0.1394247324E+01 Warning: maximum velocity exceeds speed of light 1 0.4179913900E+11 0.1394269198E+01 Warning: maximum velocity exceeds speed of light 1 0.4179992429E+11 0.1394295392E+01 Warning: maximum velocity exceeds speed of light 1 0.4180062454E+11 0.1394318750E+01 Warning: maximum velocity exceeds speed of light 1 0.4180128290E+11 0.1394340711E+01 Warning: maximum velocity exceeds speed of light 1 0.4180192153E+11 0.1394362013E+01 Warning: maximum velocity exceeds speed of light 1 0.4180254193E+11 0.1394382708E+01 Warning: maximum velocity exceeds speed of light 1 0.4180314045E+11 0.1394402672E+01 Warning: maximum velocity exceeds speed of light 1 0.4180372600E+11 0.1394422204E+01 3380 8.983159 1.020E+04 -14.541541 3.222636 51.730810 0.000000 0.000000 0.000000 0.217139 -2.740669 3488 27 -7.8519E+00 8.983159 2.809768 -7.839832 9.064500 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620180 8 2.8747E+05 4.602812 6.607822 3.222636 -6.625846 -13.199416 49.075594 0.000002 0.000000 0.371884 0.174E+04 min_dr_div_cs log_rel_run_E_err -6.0761874191566463 rel_E_err 8.6627981676972194D-12 png/grid_003380.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3659219978768362E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3792057117878755E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11582.826171875000 max vel inside fraction of cutoff 4662.6815179789292 max c/cs inside fraction of cutoff 5.1150442621948917 average v/vesc outside cutoff 1.8466702814475853 Kinetic plus potential energy outside cutoff 9.3792057117878755E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6212149925093460 check gamma integral 4.2338120203023549E-002 Warning: maximum velocity exceeds speed of light 1 0.4180430340E+11 0.1394441464E+01 Warning: maximum velocity exceeds speed of light 1 0.4180487425E+11 0.1394460505E+01 Warning: maximum velocity exceeds speed of light 1 0.4180544096E+11 0.1394479409E+01 Warning: maximum velocity exceeds speed of light 1 0.4180611977E+11 0.1394502052E+01 Warning: maximum velocity exceeds speed of light 1 0.4180693257E+11 0.1394529164E+01 Warning: maximum velocity exceeds speed of light 1 0.4180762789E+11 0.1394552357E+01 Warning: maximum velocity exceeds speed of light 1 0.4180828734E+11 0.1394574354E+01 Warning: maximum velocity exceeds speed of light 1 0.4180907700E+11 0.1394600694E+01 Warning: maximum velocity exceeds speed of light 1 0.4181002214E+11 0.1394632221E+01 Warning: maximum velocity exceeds speed of light 1 0.4181115281E+11 0.1394669936E+01 3390 8.978273 1.016E+04 -14.573765 3.188873 51.730810 0.000000 0.000000 0.000000 0.217139 -2.753335 3491 27 -7.5574E+00 8.978273 2.812063 -7.740210 8.989865 -99.000000 51.730810 0.000000 0.059829 0.782861 0.620518 9 2.8747E+05 4.588863 6.606439 3.188873 -6.980087 -13.204009 49.075594 0.000002 0.000000 0.371884 0.175E+04 max increase log_rel_run_E_err -6.0729981879699420 rel_E_err 8.7674390861367490D-11 png/grid_003390.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488147 9.3676390665174653E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742898 9.3809652822344912E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11588.517578125000 max vel inside fraction of cutoff 4589.2347504351419 max c/cs inside fraction of cutoff 5.1007779012676204 average v/vesc outside cutoff 1.8496872720236106 Kinetic plus potential energy outside cutoff 9.3809652822344912E+049 mass inside cutoff 897 50.587898390501309 relax counter 0 log max v [km/s]= 5.6212921420090645 check gamma integral 4.2555621862592305E-002 Warning: maximum velocity exceeds speed of light 1 0.4181250457E+11 0.1394715025E+01 Warning: maximum velocity exceeds speed of light 1 0.4181365811E+11 0.1394753503E+01 Warning: maximum velocity exceeds speed of light 1 0.4181472032E+11 0.1394788935E+01 Warning: maximum velocity exceeds speed of light 1 0.4181571771E+11 0.1394822204E+01 Warning: maximum velocity exceeds speed of light 1 0.4181666215E+11 0.1394853708E+01 Warning: maximum velocity exceeds speed of light 1 0.4181758658E+11 0.1394884543E+01 Warning: maximum velocity exceeds speed of light 1 0.4181848900E+11 0.1394914644E+01 Warning: maximum velocity exceeds speed of light 1 0.4181937110E+11 0.1394944068E+01 Warning: maximum velocity exceeds speed of light 1 0.4182023665E+11 0.1394972940E+01 Warning: maximum velocity exceeds speed of light 1 0.4182127225E+11 0.1395007484E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 8.970260 1.011E+04 -14.625844 3.141472 51.730810 0.000000 0.000000 0.000000 0.217139 -2.774077 3495 27 -7.5832E+00 8.970260 2.815250 -7.660498 8.868351 -99.000000 51.730810 0.000000 0.059829 0.782861 0.621084 9 2.8747E+05 4.566013 6.604525 3.141472 -7.565693 -13.210384 49.075594 0.000002 0.000000 0.371884 0.175E+04 max increase log_rel_run_E_err -6.0386015047545198 rel_E_err 1.6440184478282659D-10 save LOGS/profile20.data for model 3400 save photos/x400 for model 3400 png/grid_003400.png/png k, q, energy_removed_layers before adjustment is 889 0.97910098575488147 9.3699989234246874E+049 k, q, energy_removed_layers after adjustment is 896 0.97790656330742898 9.3833802686054705E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11596.468750000000 max vel inside fraction of cutoff 4534.3496181430301 max c/cs inside fraction of cutoff 5.0765443144699507 average v/vesc outside cutoff 1.8538877475242033 Kinetic plus potential energy outside cutoff 9.3833802686054705E+049 mass inside cutoff 896 50.587898390501309 relax counter 0 log max v [km/s]= 5.6213972403734429 check gamma integral 4.2886908178111798E-002 Warning: maximum velocity exceeds speed of light 1 0.4182251055E+11 0.1395048789E+01 Warning: maximum velocity exceeds speed of light 1 0.4182349837E+11 0.1395081739E+01 Warning: maximum velocity exceeds speed of light 1 0.4182428682E+11 0.1395108039E+01 Warning: maximum velocity exceeds speed of light 1 0.4182496264E+11 0.1395130582E+01 Warning: maximum velocity exceeds speed of light 1 0.4182556926E+11 0.1395150817E+01 Warning: maximum velocity exceeds speed of light 1 0.4182614138E+11 0.1395169900E+01 Warning: maximum velocity exceeds speed of light 1 0.4182669418E+11 0.1395188340E+01 Warning: maximum velocity exceeds speed of light 1 0.4182735627E+11 0.1395210425E+01 Warning: maximum velocity exceeds speed of light 1 0.4182814891E+11 0.1395236865E+01 Warning: maximum velocity exceeds speed of light 1 0.4182880173E+11 0.1395258640E+01 3410 8.963488 1.008E+04 -14.670123 3.106615 51.730810 0.000000 0.000000 0.000000 0.217139 -2.791568 3487 27 -7.7741E+00 8.963488 2.817666 -7.650238 8.764189 -99.000000 51.730810 0.000000 0.059829 0.782861 0.621579 9 2.8747E+05 4.546731 6.603078 3.106615 -8.069015 -13.215217 49.075594 0.000002 0.000000 0.371884 0.175E+04 min_dr_div_cs log_rel_run_E_err -6.0249680488260813 rel_E_err 5.0418613520076704D-12 png/grid_003410.png/png k, q, energy_removed_layers before adjustment is 889 0.97910098575488147 9.3717703766776547E+049 k, q, energy_removed_layers after adjustment is 896 0.97790656330742898 9.3851906374500513E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11602.529296875000 max vel inside fraction of cutoff 4504.6312431857059 max c/cs inside fraction of cutoff 5.0938396423314094 average v/vesc outside cutoff 1.8570817515437732 Kinetic plus potential energy outside cutoff 9.3851906374500513E+049 mass inside cutoff 896 50.587898390501309 relax counter 0 log max v [km/s]= 5.6214754234909048 check gamma integral 4.3152789678345307E-002 Warning: maximum velocity exceeds speed of light 1 0.4182939820E+11 0.1395278536E+01 Warning: maximum velocity exceeds speed of light 1 0.4182997109E+11 0.1395297646E+01 Warning: maximum velocity exceeds speed of light 1 0.4183051320E+11 0.1395315729E+01 Warning: maximum velocity exceeds speed of light 1 0.4183116248E+11 0.1395337386E+01 Warning: maximum velocity exceeds speed of light 1 0.4183193980E+11 0.1395363315E+01 Warning: maximum velocity exceeds speed of light 1 0.4183258311E+11 0.1395384773E+01 Warning: maximum velocity exceeds speed of light 1 0.4183317138E+11 0.1395404396E+01 Warning: maximum velocity exceeds speed of light 1 0.4183373738E+11 0.1395423276E+01 Warning: maximum velocity exceeds speed of light 1 0.4183427347E+11 0.1395441158E+01 Warning: maximum velocity exceeds speed of light 1 0.4183491552E+11 0.1395462574E+01 3420 8.957563 1.005E+04 -14.709193 3.079023 51.730810 0.000000 0.000000 0.000000 0.217139 -2.806841 3488 27 -7.7734E+00 8.957563 2.819657 -7.659694 8.671616 -99.000000 51.730810 0.000000 0.059829 0.782861 0.622022 8 2.8747E+05 4.529887 6.601888 3.079023 -8.516137 -13.219200 49.075594 0.000002 0.000000 0.371884 0.176E+04 max increase log_rel_run_E_err -6.0135792418483867 rel_E_err 3.0404382080701330D-09 png/grid_003420.png/png k, q, energy_removed_layers before adjustment is 889 0.97910098575488147 9.3732190146409425E+049 k, q, energy_removed_layers after adjustment is 896 0.97790656330742898 9.3866695306083579E+049 Layers above q= 0.97790656330742898 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11607.550781250000 max vel inside fraction of cutoff 4442.7597924579095 max c/cs inside fraction of cutoff 5.0637519528098895 average v/vesc outside cutoff 1.8597206821547532 Kinetic plus potential energy outside cutoff 9.3866695306083579E+049 mass inside cutoff 896 50.587898390501309 relax counter 0 log max v [km/s]= 5.6215388963385227 check gamma integral 4.3377168687539179E-002 Warning: maximum velocity exceeds speed of light 1 0.4183568419E+11 0.1395488214E+01 Warning: maximum velocity exceeds speed of light 1 0.4183634145E+11 0.1395510138E+01 Warning: maximum velocity exceeds speed of light 1 0.4183696983E+11 0.1395531099E+01 Warning: maximum velocity exceeds speed of light 1 0.4183772214E+11 0.1395556193E+01 Warning: maximum velocity exceeds speed of light 1 0.4183862241E+11 0.1395586223E+01 Warning: maximum velocity exceeds speed of light 1 0.4183934103E+11 0.1395610193E+01 Warning: maximum velocity exceeds speed of light 1 0.4183999981E+11 0.1395632168E+01 Warning: maximum velocity exceeds speed of light 1 0.4184063786E+11 0.1395653451E+01 Warning: maximum velocity exceeds speed of light 1 0.4184124421E+11 0.1395673677E+01 Warning: maximum velocity exceeds speed of light 1 0.4184197018E+11 0.1395697892E+01 3430 8.950252 1.001E+04 -14.757512 3.047970 51.730810 0.000000 0.000000 0.000000 0.217139 -2.825673 3484 27 -7.7106E+00 8.950252 2.821990 -7.696730 8.556148 -99.000000 51.730810 0.000000 0.059829 0.782861 0.622580 8 2.8747E+05 4.509123 6.600498 3.047970 -9.075525 -13.223867 49.075594 0.000002 0.000000 0.371884 0.176E+04 max increase log_rel_run_E_err -5.9976208409980867 rel_E_err 5.5498712607085731D-09 png/grid_003430.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488158 9.3748403235414827E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742909 9.3883242428164605E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11613.464843750000 max vel inside fraction of cutoff 4363.7677600327916 max c/cs inside fraction of cutoff 5.0330753527338095 average v/vesc outside cutoff 1.8628063344854993 Kinetic plus potential energy outside cutoff 9.3883242428164605E+049 mass inside cutoff 897 50.587898390501323 relax counter 0 log max v [km/s]= 5.6216121255930087 check gamma integral 4.3643346847429633E-002 Warning: maximum velocity exceeds speed of light 1 0.4184283896E+11 0.1395726872E+01 Warning: maximum velocity exceeds speed of light 1 0.4184356795E+11 0.1395751188E+01 Warning: maximum velocity exceeds speed of light 1 0.4184425433E+11 0.1395774083E+01 Warning: maximum velocity exceeds speed of light 1 0.4184491554E+11 0.1395796139E+01 Warning: maximum velocity exceeds speed of light 1 0.4184553863E+11 0.1395816923E+01 Warning: maximum velocity exceeds speed of light 1 0.4184628455E+11 0.1395841804E+01 Warning: maximum velocity exceeds speed of light 1 0.4184717710E+11 0.1395871577E+01 Warning: maximum velocity exceeds speed of light 1 0.4184790092E+11 0.1395895721E+01 Warning: maximum velocity exceeds speed of light 1 0.4184856948E+11 0.1395918021E+01 Warning: maximum velocity exceeds speed of light 1 0.4184920123E+11 0.1395939094E+01 3440 8.942278 9974.200 -14.810348 3.016987 51.730810 0.000000 0.000000 0.000000 0.217139 -2.846193 3497 27 -7.7609E+00 8.942278 2.824423 -7.797830 8.428687 -99.000000 51.730810 0.000000 0.059829 0.782861 0.623203 9 2.8747E+05 4.486504 6.599052 3.016987 -9.695379 -13.228734 49.075594 0.000002 0.000000 0.371884 0.176E+04 min_dr_div_cs log_rel_run_E_err -5.9941547918074907 rel_E_err 4.7242523746955918D-12 png/grid_003440.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488158 9.3765814023866610E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742909 9.3900979314374300E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11619.666015625000 max vel inside fraction of cutoff 4304.8135438777372 max c/cs inside fraction of cutoff 5.0234189132789151 average v/vesc outside cutoff 1.8660472866979649 Kinetic plus potential energy outside cutoff 9.3900979314374300E+049 mass inside cutoff 897 50.587898390501323 relax counter 0 log max v [km/s]= 5.6216871730460891 check gamma integral 4.3922030836023487E-002 Warning: maximum velocity exceeds speed of light 1 0.4184981616E+11 0.1395959606E+01 Warning: maximum velocity exceeds speed of light 1 0.4185042706E+11 0.1395979984E+01 Warning: maximum velocity exceeds speed of light 1 0.4185101546E+11 0.1395999610E+01 Warning: maximum velocity exceeds speed of light 1 0.4185171990E+11 0.1396023108E+01 Warning: maximum velocity exceeds speed of light 1 0.4185256289E+11 0.1396051227E+01 Warning: maximum velocity exceeds speed of light 1 0.4185326516E+11 0.1396074652E+01 Warning: maximum velocity exceeds speed of light 1 0.4185392432E+11 0.1396096640E+01 Warning: maximum velocity exceeds speed of light 1 0.4185455775E+11 0.1396117768E+01 Warning: maximum velocity exceeds speed of light 1 0.4185515232E+11 0.1396137601E+01 Warning: maximum velocity exceeds speed of light 1 0.4185586410E+11 0.1396161344E+01 3450 8.934567 9940.307 -14.861823 2.989112 51.730810 0.000000 0.000000 0.000000 0.217139 -2.866021 3486 27 -7.6996E+00 8.934567 2.826704 -7.950910 8.303493 -99.000000 51.730810 0.000000 0.059829 0.782861 0.623819 9 2.8747E+05 4.464656 6.597700 2.989112 -10.305649 -13.233297 49.075594 0.000002 0.000000 0.371884 0.177E+04 max increase log_rel_run_E_err -5.9911111404558355 rel_E_err 1.1754444225787395D-10 save photos/x450 for model 3450 png/grid_003450.png/png k, q, energy_removed_layers before adjustment is 890 0.97910098575488158 9.3781994466778408E+049 k, q, energy_removed_layers after adjustment is 897 0.97790656330742909 9.3917445780780652E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11625.509765625000 max vel inside fraction of cutoff 4226.6335318080119 max c/cs inside fraction of cutoff 4.9911610027551205 average v/vesc outside cutoff 1.8690934141378064 Kinetic plus potential energy outside cutoff 9.3917445780780652E+049 mass inside cutoff 897 50.587898390501323 relax counter 0 log max v [km/s]= 5.6217563122380811 check gamma integral 4.4182011291911051E-002 Warning: maximum velocity exceeds speed of light 1 0.4185671580E+11 0.1396189753E+01 Warning: maximum velocity exceeds speed of light 1 0.4185773432E+11 0.1396223727E+01 Warning: maximum velocity exceeds speed of light 1 0.4185858364E+11 0.1396252058E+01 Warning: maximum velocity exceeds speed of light 1 0.4185936591E+11 0.1396278151E+01 Warning: maximum velocity exceeds speed of light 1 0.4186010470E+11 0.1396302795E+01 Warning: maximum velocity exceeds speed of light 1 0.4186098857E+11 0.1396332278E+01 Warning: maximum velocity exceeds speed of light 1 0.4186204534E+11 0.1396367528E+01 Warning: maximum velocity exceeds speed of light 1 0.4186289242E+11 0.1396395783E+01 Warning: maximum velocity exceeds speed of light 1 0.4186368307E+11 0.1396422156E+01 Warning: maximum velocity exceeds speed of light 1 0.4186442145E+11 0.1396446786E+01 3460 8.924149 9896.094 -14.931748 2.953775 51.730810 0.000000 0.000000 0.000000 0.217139 -2.892813 3478 27 -7.6709E+00 8.924149 2.829692 -8.215409 8.131933 -99.000000 51.730810 0.000000 0.059829 0.782861 0.624667 8 2.8747E+05 4.435171 6.595934 2.953775 -11.146562 -13.239276 49.075594 0.000002 0.000000 0.371884 0.177E+04 min_dr_div_cs log_rel_run_E_err -5.9827063749599478 rel_E_err 3.0266308061549341D-09 png/grid_003460.png/png k, q, energy_removed_layers before adjustment is 891 0.97910098575488158 9.3802980790010959E+049 k, q, energy_removed_layers after adjustment is 898 0.97790656330742909 9.3938779424056484E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11633.210937500000 max vel inside fraction of cutoff 4101.9212305106357 max c/cs inside fraction of cutoff 4.9290103579193314 average v/vesc outside cutoff 1.8730960799791063 Kinetic plus potential energy outside cutoff 9.3938779424056484E+049 mass inside cutoff 898 50.587898390501323 relax counter 0 log max v [km/s]= 5.6218450938010145 check gamma integral 4.4518779943268590E-002 Warning: maximum velocity exceeds speed of light 1 0.4186510064E+11 0.1396469442E+01 Warning: maximum velocity exceeds speed of light 1 0.4186591334E+11 0.1396496550E+01 Warning: maximum velocity exceeds speed of light 1 0.4186688521E+11 0.1396528968E+01 Warning: maximum velocity exceeds speed of light 1 0.4186804663E+11 0.1396567709E+01 Warning: maximum velocity exceeds speed of light 1 0.4186943339E+11 0.1396613966E+01 Warning: maximum velocity exceeds speed of light 1 0.4187108753E+11 0.1396669143E+01 Warning: maximum velocity exceeds speed of light 1 0.4187241700E+11 0.1396713489E+01 Warning: maximum velocity exceeds speed of light 1 0.4187364948E+11 0.1396754600E+01 Warning: maximum velocity exceeds speed of light 1 0.4187480421E+11 0.1396793118E+01 Warning: maximum velocity exceeds speed of light 1 0.4187587499E+11 0.1396828835E+01 3470 8.909348 9835.604 -15.031296 2.906485 51.730810 0.000000 0.000000 0.000000 0.217139 -2.930915 3477 27 -7.4914E+00 8.909348 2.833807 -8.686820 7.884691 -99.000000 51.730810 0.000000 0.059829 0.782861 0.625897 9 2.8747E+05 4.393333 6.593512 2.906485 -12.372470 -13.247507 49.075594 0.000002 0.000000 0.371884 0.178E+04 min_dr_div_cs log_rel_run_E_err -5.9783847038865208 rel_E_err 1.9541493489058139D-11 png/grid_003470.png/png k, q, energy_removed_layers before adjustment is 892 0.97910098575488158 9.3830562398288794E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742909 9.3966791697749484E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11643.896484375000 max vel inside fraction of cutoff 3932.5949726409181 max c/cs inside fraction of cutoff 4.8371573884451822 average v/vesc outside cutoff 1.8786189233223436 Kinetic plus potential energy outside cutoff 9.3966791697749484E+049 mass inside cutoff 899 50.587898390501323 relax counter 0 log max v [km/s]= 5.6219638946192827 check gamma integral 4.4971070648310178E-002 Warning: maximum velocity exceeds speed of light 1 0.4187715375E+11 0.1396871490E+01 Warning: maximum velocity exceeds speed of light 1 0.4187867941E+11 0.1396922381E+01 Warning: maximum velocity exceeds speed of light 1 0.4187993550E+11 0.1396964279E+01 Warning: maximum velocity exceeds speed of light 1 0.4188096532E+11 0.1396998630E+01 Warning: maximum velocity exceeds speed of light 1 0.4188178656E+11 0.1397026024E+01 Warning: maximum velocity exceeds speed of light 1 0.4188250214E+11 0.1397049893E+01 Warning: maximum velocity exceeds speed of light 1 0.4188316283E+11 0.1397071931E+01 Warning: maximum velocity exceeds speed of light 1 0.4188379113E+11 0.1397092889E+01 Warning: maximum velocity exceeds speed of light 1 0.4188454286E+11 0.1397117964E+01 Warning: maximum velocity exceeds speed of light 1 0.4188544174E+11 0.1397147948E+01 3480 8.896494 9783.859 -15.118640 2.866979 51.730810 0.000000 0.000000 0.000000 0.217139 -2.964009 3484 27 -7.5514E+00 8.896494 2.837350 -9.155671 7.665524 -99.000000 51.730810 0.000000 0.059829 0.782861 0.626998 10 2.8747E+05 4.357059 6.591435 2.866979 -13.470232 -13.254595 49.075594 0.000002 0.000000 0.371884 0.178E+04 min_dr_div_cs log_rel_run_E_err -5.9703405750107050 rel_E_err 6.5282070272595421D-10 png/grid_003480.png/png k, q, energy_removed_layers before adjustment is 892 0.97910098575488158 9.3854235260353663E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742909 9.3990796004152264E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11653.175781250000 max vel inside fraction of cutoff 3831.7119979474510 max c/cs inside fraction of cutoff 4.8069020333458994 average v/vesc outside cutoff 1.8833907404319756 Kinetic plus potential energy outside cutoff 9.3990796004152264E+049 mass inside cutoff 899 50.587898390501323 relax counter 0 log max v [km/s]= 5.6220631000528840 check gamma integral 4.5348495384953558E-002 Warning: maximum velocity exceeds speed of light 1 0.4188617346E+11 0.1397172355E+01 Warning: maximum velocity exceeds speed of light 1 0.4188686099E+11 0.1397195289E+01 Warning: maximum velocity exceeds speed of light 1 0.4188753766E+11 0.1397217860E+01 Warning: maximum velocity exceeds speed of light 1 0.4188817852E+11 0.1397239237E+01 Warning: maximum velocity exceeds speed of light 1 0.4188894517E+11 0.1397264809E+01 Warning: maximum velocity exceeds speed of light 1 0.4188986173E+11 0.1397295382E+01 Warning: maximum velocity exceeds speed of light 1 0.4189064542E+11 0.1397321524E+01 Warning: maximum velocity exceeds speed of light 1 0.4189135966E+11 0.1397345348E+01 Warning: maximum velocity exceeds speed of light 1 0.4189201447E+11 0.1397367190E+01 Warning: maximum velocity exceeds speed of light 1 0.4189263209E+11 0.1397387792E+01 3490 8.886598 9744.178 -15.186440 2.837167 51.730810 0.000000 0.000000 0.000000 0.217139 -2.989484 3482 27 -7.7017E+00 8.886598 2.840082 -9.528844 7.494420 -99.000000 51.730810 0.000000 0.059829 0.782861 0.627868 9 2.8747E+05 4.329177 6.589839 2.837167 -14.336862 -13.260060 49.075594 0.000002 0.000000 0.371884 0.178E+04 min_dr_div_cs log_rel_run_E_err -5.9674778876360106 rel_E_err 4.2216739086253860D-11 png/grid_003490.png/png k, q, energy_removed_layers before adjustment is 893 0.97892075989682281 9.3911937100229338E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742909 9.4009489540109978E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11660.382812500000 max vel inside fraction of cutoff 3741.1133476999767 max c/cs inside fraction of cutoff 4.7534561244479807 average v/vesc outside cutoff 1.8870938258026482 Kinetic plus potential energy outside cutoff 9.4009489540109978E+049 mass inside cutoff 899 50.587898390501323 relax counter 0 log max v [km/s]= 5.6221376477152560 check gamma integral 4.5630487838354279E-002 Warning: maximum velocity exceeds speed of light 1 0.4189337096E+11 0.1397412438E+01 Warning: maximum velocity exceeds speed of light 1 0.4189425434E+11 0.1397441904E+01 Warning: maximum velocity exceeds speed of light 1 0.4189503776E+11 0.1397468036E+01 Warning: maximum velocity exceeds speed of light 1 0.4189574834E+11 0.1397491739E+01 Warning: maximum velocity exceeds speed of light 1 0.4189642214E+11 0.1397514214E+01 Warning: maximum velocity exceeds speed of light 1 0.4189722792E+11 0.1397541092E+01 Warning: maximum velocity exceeds speed of light 1 0.4189819086E+11 0.1397573213E+01 Warning: maximum velocity exceeds speed of light 1 0.4189902899E+11 0.1397601170E+01 Warning: maximum velocity exceeds speed of light 1 0.4189981354E+11 0.1397627339E+01 Warning: maximum velocity exceeds speed of light 1 0.4190055360E+11 0.1397652025E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 8.875445 9699.573 -15.263078 2.804308 51.730810 0.000000 0.000000 0.000000 0.217139 -3.018226 3472 27 -7.6085E+00 8.875445 2.843168 -9.951219 7.300407 -99.000000 51.730810 0.000000 0.059829 0.782861 0.628863 9 2.8747E+05 4.297785 6.588041 2.804308 -15.335317 -13.266234 49.075594 0.000002 0.000000 0.371884 0.179E+04 min_dr_div_cs log_rel_run_E_err -5.9626805582277296 rel_E_err 1.4863693495873207D-10 save LOGS/profile21.data for model 3500 save photos/x500 for model 3500 png/grid_003500.png/png k, q, energy_removed_layers before adjustment is 893 0.97892075989682281 9.3932619327177979E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742909 9.4030360547486640E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11668.576171875000 max vel inside fraction of cutoff 3611.3521398917355 max c/cs inside fraction of cutoff 4.6579336745928179 average v/vesc outside cutoff 1.8912911732485276 Kinetic plus potential energy outside cutoff 9.4030360547486640E+049 mass inside cutoff 899 50.587898390501323 relax counter 0 log max v [km/s]= 5.6222197609670612 check gamma integral 4.5938615644400847E-002 Warning: maximum velocity exceeds speed of light 1 0.4190127345E+11 0.1397676036E+01 Warning: maximum velocity exceeds speed of light 1 0.4190213399E+11 0.1397704741E+01 Warning: maximum velocity exceeds speed of light 1 0.4190316194E+11 0.1397739030E+01 Warning: maximum velocity exceeds speed of light 1 0.4190399793E+11 0.1397766916E+01 Warning: maximum velocity exceeds speed of light 1 0.4190477244E+11 0.1397792750E+01 Warning: maximum velocity exceeds speed of light 1 0.4190569797E+11 0.1397823623E+01 Warning: maximum velocity exceeds speed of light 1 0.4190680301E+11 0.1397860483E+01 Warning: maximum velocity exceeds speed of light 1 0.4190812103E+11 0.1397904447E+01 Warning: maximum velocity exceeds speed of light 1 0.4190927182E+11 0.1397942834E+01 Warning: maximum velocity exceeds speed of light 1 0.4191034915E+11 0.1397978769E+01 3510 8.861405 9642.975 -15.360084 2.762902 51.730810 0.000000 0.000000 0.000000 0.217139 -3.054488 3466 27 -7.4261E+00 8.861405 2.847108 -10.505877 7.055204 -99.000000 51.730810 0.000000 0.059829 0.782861 0.630135 9 2.8747E+05 4.258294 6.585754 2.762902 -16.626753 -13.274115 49.075594 0.000002 0.000000 0.371884 0.179E+04 min_dr_div_cs log_rel_run_E_err -5.9567088569037185 rel_E_err 6.1254937134148688D-10 png/grid_003510.png/png k, q, energy_removed_layers before adjustment is 893 0.97892075989682281 9.3958676361456724E+049 k, q, energy_removed_layers after adjustment is 899 0.97790656330742909 9.4056623302451350E+049 Layers above q= 0.97790656330742909 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11679.117187500000 max vel inside fraction of cutoff 3437.9123999746971 max c/cs inside fraction of cutoff 4.5415920654751814 average v/vesc outside cutoff 1.8966705276047167 Kinetic plus potential energy outside cutoff 9.4056623302451350E+049 mass inside cutoff 899 50.587898390501323 relax counter 0 log max v [km/s]= 5.6223212789364378 check gamma integral 4.6316073521093043E-002 Warning: maximum velocity exceeds speed of light 1 0.4191137605E+11 0.1398013023E+01 Warning: maximum velocity exceeds speed of light 1 0.4191260116E+11 0.1398053888E+01 Warning: maximum velocity exceeds speed of light 1 0.4191406099E+11 0.1398102583E+01 Warning: maximum velocity exceeds speed of light 1 0.4191538577E+11 0.1398146773E+01 Warning: maximum velocity exceeds speed of light 1 0.4191665374E+11 0.1398189068E+01 Warning: maximum velocity exceeds speed of light 1 0.4191789433E+11 0.1398230450E+01 Warning: maximum velocity exceeds speed of light 1 0.4191910390E+11 0.1398270796E+01 Warning: maximum velocity exceeds speed of light 1 0.4192017307E+11 0.1398306460E+01 Warning: maximum velocity exceeds speed of light 1 0.4192111227E+11 0.1398337788E+01 Warning: maximum velocity exceeds speed of light 1 0.4192200164E+11 0.1398367455E+01 3520 8.844584 9573.320 -15.477591 2.713301 51.730810 0.000000 0.000000 0.000000 0.217139 -3.098033 3478 27 -7.4844E+00 8.844584 2.851993 -11.233345 6.762009 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631686 9 2.8747E+05 4.211037 6.582930 2.713301 -18.227465 -13.283887 49.075594 0.000002 0.000000 0.371884 0.180E+04 min_dr_div_cs log_rel_run_E_err -5.9480117009033941 rel_E_err 6.2390914330357001D-10 png/grid_003520.png/png k, q, energy_removed_layers before adjustment is 894 0.97892075989682292 9.3989742696857120E+049 k, q, energy_removed_layers after adjustment is 900 0.97790656330742920 9.4087894023791944E+049 Layers above q= 0.97790656330742920 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11692.320312500000 max vel inside fraction of cutoff 3296.8616008732934 max c/cs inside fraction of cutoff 4.4703279373954086 average v/vesc outside cutoff 1.9033616657503305 Kinetic plus potential energy outside cutoff 9.4087894023791944E+049 mass inside cutoff 900 50.587898390501330 relax counter 0 log max v [km/s]= 5.6224420106462265 check gamma integral 4.6760003522573312E-002 Warning: maximum velocity exceeds speed of light 1 0.4192284608E+11 0.1398395622E+01 Warning: maximum velocity exceeds speed of light 1 0.4192367161E+11 0.1398423159E+01 Warning: maximum velocity exceeds speed of light 1 0.4192465712E+11 0.1398456032E+01 Warning: maximum velocity exceeds speed of light 1 0.4192583239E+11 0.1398495235E+01 Warning: maximum velocity exceeds speed of light 1 0.4192684489E+11 0.1398529008E+01 Warning: maximum velocity exceeds speed of light 1 0.4192778168E+11 0.1398560256E+01 Warning: maximum velocity exceeds speed of light 1 0.4192867008E+11 0.1398589890E+01 Warning: maximum velocity exceeds speed of light 1 0.4192972998E+11 0.1398625244E+01 Warning: maximum velocity exceeds speed of light 1 0.4193099297E+11 0.1398667373E+01 Warning: maximum velocity exceeds speed of light 1 0.4193209569E+11 0.1398704156E+01 3530 8.829983 9510.687 -15.580554 2.674255 51.730810 0.000000 0.000000 0.000000 0.217139 -3.135889 3469 27 -7.3674E+00 8.829983 2.856421 -11.908915 6.512342 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633064 9 2.8747E+05 4.170072 6.580383 2.674255 -19.665476 -13.292745 49.075594 0.000002 0.000000 0.371884 0.181E+04 min_dr_div_cs log_rel_run_E_err -5.9402438335556109 rel_E_err 1.0672525212016205D-09 png/grid_003530.png/png k, q, energy_removed_layers before adjustment is 895 0.97892075989682292 9.4017517042561817E+049 k, q, energy_removed_layers after adjustment is 901 0.97790656330742920 9.4115810744318031E+049 Layers above q= 0.97790656330742920 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11704.412109375000 max vel inside fraction of cutoff 3138.7939444730741 max c/cs inside fraction of cutoff 4.3827678041160834 average v/vesc outside cutoff 1.9094568689892082 Kinetic plus potential energy outside cutoff 9.4115810744318031E+049 mass inside cutoff 901 50.587898390501330 relax counter 0 log max v [km/s]= 5.6225465682211277 check gamma integral 4.7137666546043434E-002 Warning: maximum velocity exceeds speed of light 1 0.4193340913E+11 0.1398747968E+01 Warning: maximum velocity exceeds speed of light 1 0.4193497116E+11 0.1398800071E+01 Warning: maximum velocity exceeds speed of light 1 0.4193621178E+11 0.1398841454E+01 Warning: maximum velocity exceeds speed of light 1 0.4193735436E+11 0.1398879566E+01 Warning: maximum velocity exceeds speed of light 1 0.4193842066E+11 0.1398915134E+01 Warning: maximum velocity exceeds speed of light 1 0.4193942869E+11 0.1398948758E+01 Warning: maximum velocity exceeds speed of light 1 0.4194062954E+11 0.1398988814E+01 Warning: maximum velocity exceeds speed of light 1 0.4194205793E+11 0.1399036460E+01 Warning: maximum velocity exceeds speed of light 1 0.4194331364E+11 0.1399078346E+01 Warning: maximum velocity exceeds speed of light 1 0.4194454839E+11 0.1399119533E+01 3540 8.812000 9429.889 -15.708299 2.626187 51.730810 0.000000 0.000000 0.000000 0.217139 -3.182648 3448 27 -7.2860E+00 8.812000 2.862185 -12.791418 6.218794 -99.000000 51.730810 0.000000 0.059829 0.782861 0.634788 9 2.8747E+05 4.119666 6.577091 2.626187 -21.500088 -13.304277 49.075594 0.000002 0.000000 0.371884 0.181E+04 lgRho_cntr log_rel_run_E_err -5.9339245645631431 rel_E_err 4.4224495343777911D-11 png/grid_003540.png/png k, q, energy_removed_layers before adjustment is 895 0.97892075989682314 9.4053152328959442E+049 k, q, energy_removed_layers after adjustment is 901 0.97790656330742942 9.4151577537633660E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11720.339843750000 max vel inside fraction of cutoff 2957.4538008239551 max c/cs inside fraction of cutoff 4.2889418823653083 average v/vesc outside cutoff 1.9174433104922231 Kinetic plus potential energy outside cutoff 9.4151577537633660E+049 mass inside cutoff 901 50.587898390501337 relax counter 0 log max v [km/s]= 5.6226755227961824 check gamma integral 4.7594149654331418E-002 Warning: maximum velocity exceeds speed of light 1 0.4194601622E+11 0.1399168495E+01 Warning: maximum velocity exceeds speed of light 1 0.4194775771E+11 0.1399226585E+01 Warning: maximum velocity exceeds speed of light 1 0.4194921192E+11 0.1399275092E+01 Warning: maximum velocity exceeds speed of light 1 0.4195054427E+11 0.1399319534E+01 Warning: maximum velocity exceeds speed of light 1 0.4195179018E+11 0.1399361093E+01 Warning: maximum velocity exceeds speed of light 1 0.4195295654E+11 0.1399399999E+01 Warning: maximum velocity exceeds speed of light 1 0.4195405690E+11 0.1399436703E+01 Warning: maximum velocity exceeds speed of light 1 0.4195510011E+11 0.1399471501E+01 Warning: maximum velocity exceeds speed of light 1 0.4195611004E+11 0.1399505188E+01 Warning: maximum velocity exceeds speed of light 1 0.4195709015E+11 0.1399537881E+01 3550 8.794210 9343.833 -15.835779 2.578654 51.730810 0.000000 0.000000 0.000000 0.217139 -3.229010 3458 27 -7.3492E+00 8.794210 2.868393 -13.743495 5.951558 -99.000000 51.730810 0.000000 0.059829 0.782861 0.636530 9 2.8747E+05 4.069868 6.573579 2.578654 -23.386795 -13.316694 49.075594 0.000002 0.000000 0.371884 0.182E+04 min_dr_div_cs log_rel_run_E_err -5.9211833814025452 rel_E_err 3.0105273832226653D-09 save photos/x550 for model 3550 png/grid_003550.png/png k, q, energy_removed_layers before adjustment is 898 0.97892075989682303 9.4090224397148358E+049 k, q, energy_removed_layers after adjustment is 904 0.97790656330742931 9.4188736006721138E+049 Layers above q= 0.97790656330742931 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11737.720703125000 max vel inside fraction of cutoff 2805.7524630335301 max c/cs inside fraction of cutoff 4.1673120556966099 average v/vesc outside cutoff 1.9260913113709928 Kinetic plus potential energy outside cutoff 9.4188736006721138E+049 mass inside cutoff 904 50.587898390501330 relax counter 0 log max v [km/s]= 5.6228053609571775 check gamma integral 4.8044141600237331E-002 Warning: maximum velocity exceeds speed of light 1 0.4195802852E+11 0.1399569182E+01 Warning: maximum velocity exceeds speed of light 1 0.4195892317E+11 0.1399599024E+01 Warning: maximum velocity exceeds speed of light 1 0.4195978191E+11 0.1399627669E+01 Warning: maximum velocity exceeds speed of light 1 0.4196062142E+11 0.1399655672E+01 Warning: maximum velocity exceeds speed of light 1 0.4196162113E+11 0.1399689018E+01 Warning: maximum velocity exceeds speed of light 1 0.4196280972E+11 0.1399728666E+01 Warning: maximum velocity exceeds speed of light 1 0.4196381436E+11 0.1399762177E+01 Warning: maximum velocity exceeds speed of light 1 0.4196472769E+11 0.1399792642E+01 Warning: maximum velocity exceeds speed of light 1 0.4196581407E+11 0.1399828880E+01 Warning: maximum velocity exceeds speed of light 1 0.4196710393E+11 0.1399871905E+01 3560 8.780506 9271.017 -15.935357 2.542044 51.730810 0.000000 0.000000 0.000000 0.217139 -3.264761 3438 27 -7.1960E+00 8.780506 2.873699 -14.579493 5.764615 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637904 9 2.8747E+05 4.031562 6.570602 2.542044 -24.892440 -13.327310 49.075594 0.000002 0.000000 0.371884 0.183E+04 max increase log_rel_run_E_err -5.9140051134397922 rel_E_err 3.1536048621363181D-09 png/grid_003560.png/png k, q, energy_removed_layers before adjustment is 899 0.97892075989682303 9.4122019907734099E+049 k, q, energy_removed_layers after adjustment is 905 0.97790656330742931 9.4220570860970121E+049 Layers above q= 0.97790656330742931 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11752.773437500000 max vel inside fraction of cutoff 2639.4504215123347 max c/cs inside fraction of cutoff 3.9652590501391862 average v/vesc outside cutoff 1.9335478675583204 Kinetic plus potential energy outside cutoff 9.4220570860970121E+049 mass inside cutoff 905 50.587898390501330 relax counter 0 log max v [km/s]= 5.6229090004347775 check gamma integral 4.8394732043211319E-002 Warning: maximum velocity exceeds speed of light 1 0.4196863197E+11 0.1399922875E+01 Warning: maximum velocity exceeds speed of light 1 0.4196999462E+11 0.1399968328E+01 Warning: maximum velocity exceeds speed of light 1 0.4197129826E+11 0.1400011813E+01 Warning: maximum velocity exceeds speed of light 1 0.4197284118E+11 0.1400063279E+01 Warning: maximum velocity exceeds speed of light 1 0.4197466192E+11 0.1400124013E+01 Warning: maximum velocity exceeds speed of light 1 0.4197620105E+11 0.1400175352E+01 Warning: maximum velocity exceeds speed of light 1 0.4197762031E+11 0.1400222694E+01 Warning: maximum velocity exceeds speed of light 1 0.4197894998E+11 0.1400267047E+01 Warning: maximum velocity exceeds speed of light 1 0.4198052041E+11 0.1400319431E+01 Warning: maximum velocity exceeds speed of light 1 0.4198236889E+11 0.1400381089E+01 3570 8.760321 9150.359 -16.083794 2.488088 51.730810 0.000000 0.000000 0.000000 0.217139 -3.317598 3410 27 -6.9776E+00 8.760321 2.882608 -16.035619 5.522170 -99.000000 51.730810 0.000000 0.059829 0.782861 0.639949 10 2.8747E+05 3.975178 6.565661 2.488088 -27.194695 -13.345131 49.075594 0.000002 0.000000 0.371884 0.184E+04 lgRho_cntr log_rel_run_E_err -5.9040594407204594 rel_E_err 4.3315091651603555D-09 png/grid_003570.png/png k, q, energy_removed_layers before adjustment is 899 0.97892075989682314 9.4173493763695076E+049 k, q, energy_removed_layers after adjustment is 905 0.97790656330742942 9.4272062046479525E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11778.453125000000 max vel inside fraction of cutoff 2384.1925414776219 max c/cs inside fraction of cutoff 3.6444211712784504 average v/vesc outside cutoff 1.9461746270040998 Kinetic plus potential energy outside cutoff 9.4272062046479525E+049 mass inside cutoff 905 50.587898390501337 relax counter 0 log max v [km/s]= 5.6230669403381004 check gamma integral 4.8914932479016841E-002 Warning: maximum velocity exceeds speed of light 1 0.4198392468E+11 0.1400432985E+01 Warning: maximum velocity exceeds speed of light 1 0.4198533047E+11 0.1400479877E+01 Warning: maximum velocity exceeds speed of light 1 0.4198665896E+11 0.1400524191E+01 Warning: maximum velocity exceeds speed of light 1 0.4198822428E+11 0.1400576404E+01 Warning: maximum velocity exceeds speed of light 1 0.4199006134E+11 0.1400637682E+01 Warning: maximum velocity exceeds speed of light 1 0.4199161264E+11 0.1400689428E+01 Warning: maximum velocity exceeds speed of light 1 0.4199286508E+11 0.1400731204E+01 Warning: maximum velocity exceeds speed of light 1 0.4199386328E+11 0.1400764501E+01 Warning: maximum velocity exceeds speed of light 1 0.4199477717E+11 0.1400794985E+01 Warning: maximum velocity exceeds speed of light 1 0.4199585759E+11 0.1400831024E+01 3580 8.742873 9030.504 -16.213015 2.441470 51.730810 0.000000 0.000000 0.000000 0.217139 -3.363342 3409 27 -7.1397E+00 8.742873 2.891605 -17.517235 5.341842 -99.000000 51.730810 0.000000 0.059829 0.782861 0.641758 9 2.8747E+05 3.926513 6.560752 2.441470 -29.267570 -13.363130 49.075594 0.000002 0.000000 0.371884 0.185E+04 max increase log_rel_run_E_err -5.8970008564034906 rel_E_err 2.5544918009650419D-09 png/grid_003580.png/png k, q, energy_removed_layers before adjustment is 899 0.97892075989682314 9.4224447002846224E+049 k, q, energy_removed_layers after adjustment is 905 0.97790656330742942 9.4323004729356797E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11804.919921875000 max vel inside fraction of cutoff 2200.3131600345459 max c/cs inside fraction of cutoff 3.4615663221530695 average v/vesc outside cutoff 1.9590764907457434 Kinetic plus potential energy outside cutoff 9.4323004729356797E+049 mass inside cutoff 905 50.587898390501337 relax counter 0 log max v [km/s]= 5.6232064543489777 check gamma integral 4.9360953498706998E-002 Warning: maximum velocity exceeds speed of light 1 0.4199713082E+11 0.1400873494E+01 Warning: maximum velocity exceeds speed of light 1 0.4199813459E+11 0.1400906976E+01 Warning: maximum velocity exceeds speed of light 1 0.4199892814E+11 0.1400933446E+01 Warning: maximum velocity exceeds speed of light 1 0.4199955695E+11 0.1400954421E+01 Warning: maximum velocity exceeds speed of light 1 0.4200010988E+11 0.1400972865E+01 Warning: maximum velocity exceeds speed of light 1 0.4200063346E+11 0.1400990330E+01 Warning: maximum velocity exceeds speed of light 1 0.4200114216E+11 0.1401007298E+01 Warning: maximum velocity exceeds speed of light 1 0.4200174668E+11 0.1401027463E+01 Warning: maximum velocity exceeds speed of light 1 0.4200246360E+11 0.1401051377E+01 Warning: maximum velocity exceeds speed of light 1 0.4200307816E+11 0.1401071876E+01 3590 8.733737 8959.162 -16.281151 2.417080 51.730810 0.000000 0.000000 0.000000 0.217139 -3.387284 3388 27 -7.3366E+00 8.733737 2.897035 -18.391724 5.255774 -99.000000 51.730810 0.000000 0.059829 0.782861 0.642729 8 2.8747E+05 3.901074 6.557834 2.417080 -30.385150 -13.373992 49.075594 0.000002 0.000000 0.371884 0.186E+04 min_dr_div_cs log_rel_run_E_err -5.8956721198906994 rel_E_err 2.7881592680555252D-12 png/grid_003590.png/png k, q, energy_removed_layers before adjustment is 899 0.97892075989682314 9.4254403514513753E+049 k, q, energy_removed_layers after adjustment is 905 0.97790656330742942 9.4352965778267763E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11821.156250000000 max vel inside fraction of cutoff 2096.9508411646161 max c/cs inside fraction of cutoff 3.3670689644386802 average v/vesc outside cutoff 1.9669287303693994 Kinetic plus potential energy outside cutoff 9.4352965778267763E+049 mass inside cutoff 905 50.587898390501337 relax counter 0 log max v [km/s]= 5.6232811184663181 check gamma integral 4.9593597004571575E-002 Warning: maximum velocity exceeds speed of light 1 0.4200367551E+11 0.1401091802E+01 Warning: maximum velocity exceeds speed of light 1 0.4200438354E+11 0.1401115419E+01 Warning: maximum velocity exceeds speed of light 1 0.4200522057E+11 0.1401143339E+01 Warning: maximum velocity exceeds speed of light 1 0.4200593442E+11 0.1401167151E+01 Warning: maximum velocity exceeds speed of light 1 0.4200656212E+11 0.1401188089E+01 Warning: maximum velocity exceeds speed of light 1 0.4200712054E+11 0.1401206716E+01 Warning: maximum velocity exceeds speed of light 1 0.4200765433E+11 0.1401224521E+01 Warning: maximum velocity exceeds speed of light 1 0.4200817498E+11 0.1401241888E+01 Warning: maximum velocity exceeds speed of light 1 0.4200879202E+11 0.1401262470E+01 Warning: maximum velocity exceeds speed of light 1 0.4200952137E+11 0.1401286798E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 8.725785 8889.250 -16.340689 2.395856 51.730810 0.000000 0.000000 0.000000 0.217139 -3.408131 3378 27 -7.2096E+00 8.725785 2.902409 -19.221526 5.184459 -99.000000 51.730810 0.000000 0.059829 0.782861 0.643583 7 2.8747E+05 3.878948 6.554972 2.395856 -31.376265 -13.384743 49.075594 0.000002 0.000000 0.371884 0.186E+04 min_dr_div_cs log_rel_run_E_err -5.8930988709452210 rel_E_err 1.0466128025051730D-09 save LOGS/profile22.data for model 3600 save photos/x600 for model 3600 png/grid_003600.png/png k, q, energy_removed_layers before adjustment is 901 0.97873801414978379 9.4316644219179290E+049 k, q, energy_removed_layers after adjustment is 906 0.97790656330742942 9.4381801036315360E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11837.421875000000 max vel inside fraction of cutoff 1985.3778464471263 max c/cs inside fraction of cutoff 3.2669780458592128 average v/vesc outside cutoff 1.9747364542717465 Kinetic plus potential energy outside cutoff 9.4381801036315360E+049 mass inside cutoff 906 50.587898390501337 relax counter 0 log max v [km/s]= 5.6233477334433575 check gamma integral 4.9796560704388773E-002 Warning: maximum velocity exceeds speed of light 1 0.4201009776E+11 0.1401306025E+01 Warning: maximum velocity exceeds speed of light 1 0.4201060895E+11 0.1401323076E+01 Warning: maximum velocity exceeds speed of light 1 0.4201108850E+11 0.1401339072E+01 Warning: maximum velocity exceeds speed of light 1 0.4201155494E+11 0.1401354631E+01 Warning: maximum velocity exceeds speed of light 1 0.4201210761E+11 0.1401373066E+01 Warning: maximum velocity exceeds speed of light 1 0.4201276068E+11 0.1401394850E+01 Warning: maximum velocity exceeds speed of light 1 0.4201352983E+11 0.1401420506E+01 Warning: maximum velocity exceeds speed of light 1 0.4201443199E+11 0.1401450599E+01 Warning: maximum velocity exceeds speed of light 1 0.4201523887E+11 0.1401477514E+01 Warning: maximum velocity exceeds speed of light 1 0.4201618239E+11 0.1401508986E+01 3610 8.717918 8807.897 -16.399902 2.374858 51.730810 0.000000 0.000000 0.000000 0.217139 -3.428772 3379 27 -7.0279E+00 8.717918 2.908731 -20.119253 5.116282 -99.000000 51.730810 0.000000 0.059829 0.782861 0.644435 8 2.8747E+05 3.857070 6.551644 2.374858 -32.374150 -13.397389 49.075594 0.000002 0.000000 0.371884 0.187E+04 max increase log_rel_run_E_err -5.8902966875428318 rel_E_err 3.4180008818768788D-09 png/grid_003610.png/png k, q, energy_removed_layers before adjustment is 901 0.97873801414978379 9.4349311992669658E+049 k, q, energy_removed_layers after adjustment is 906 0.97790656330742942 9.4414610611475865E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11856.816406250000 max vel inside fraction of cutoff 1861.6249969678202 max c/cs inside fraction of cutoff 3.1388392722354568 average v/vesc outside cutoff 1.9839920486472227 Kinetic plus potential energy outside cutoff 9.4414610611475865E+049 mass inside cutoff 906 50.587898390501337 relax counter 0 log max v [km/s]= 5.6234165896199935 check gamma integral 5.0002743471719402E-002 Warning: maximum velocity exceeds speed of light 1 0.4201727925E+11 0.1401545574E+01 Warning: maximum velocity exceeds speed of light 1 0.4201817654E+11 0.1401575504E+01 Warning: maximum velocity exceeds speed of light 1 0.4201897964E+11 0.1401602292E+01 Warning: maximum velocity exceeds speed of light 1 0.4201963135E+11 0.1401624031E+01 Warning: maximum velocity exceeds speed of light 1 0.4202014364E+11 0.1401641119E+01 Warning: maximum velocity exceeds speed of light 1 0.4202058142E+11 0.1401655722E+01 Warning: maximum velocity exceeds speed of light 1 0.4202097526E+11 0.1401668859E+01 Warning: maximum velocity exceeds speed of light 1 0.4202134179E+11 0.1401681085E+01 Warning: maximum velocity exceeds speed of light 1 0.4202169073E+11 0.1401692725E+01 Warning: maximum velocity exceeds speed of light 1 0.4202203074E+11 0.1401704066E+01 3620 8.711497 8724.872 -16.448757 2.357719 51.730810 0.000000 0.000000 0.000000 0.217139 -3.445624 3375 27 -7.3871E+00 8.711497 2.915268 -20.939634 5.061516 -99.000000 51.730810 0.000000 0.059829 0.782861 0.645136 6 2.8747E+05 3.839226 6.548265 2.357719 -33.202095 -13.410466 49.075594 0.000002 0.000000 0.371884 0.188E+04 min_dr_div_cs log_rel_run_E_err -5.8876939799812389 rel_E_err 9.1033944620058035D-11 png/grid_003620.png/png k, q, energy_removed_layers before adjustment is 901 0.97873801414978379 9.4383015998319798E+049 k, q, energy_removed_layers after adjustment is 906 0.97790656330742942 9.4448588620845370E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11877.167968750000 max vel inside fraction of cutoff 1760.6389610109150 max c/cs inside fraction of cutoff 3.0499244782098622 average v/vesc outside cutoff 1.9936502641408891 Kinetic plus potential energy outside cutoff 9.4448588620845370E+049 mass inside cutoff 906 50.587898390501337 relax counter 0 log max v [km/s]= 5.6234770361350623 check gamma integral 5.0180391490851579E-002 Warning: maximum velocity exceeds speed of light 1 0.4202243225E+11 0.1401717459E+01 Warning: maximum velocity exceeds speed of light 1 0.4202290471E+11 0.1401733219E+01 Warning: maximum velocity exceeds speed of light 1 0.4202345825E+11 0.1401751683E+01 Warning: maximum velocity exceeds speed of light 1 0.4202410328E+11 0.1401773199E+01 Warning: maximum velocity exceeds speed of light 1 0.4202484976E+11 0.1401798099E+01 Warning: maximum velocity exceeds speed of light 1 0.4202547376E+11 0.1401818913E+01 Warning: maximum velocity exceeds speed of light 1 0.4202605360E+11 0.1401838254E+01 Warning: maximum velocity exceeds speed of light 1 0.4202660813E+11 0.1401856751E+01 Warning: maximum velocity exceeds speed of light 1 0.4202714004E+11 0.1401874494E+01 Warning: maximum velocity exceeds speed of light 1 0.4202758304E+11 0.1401889271E+01 3630 8.705940 8627.907 -16.491491 2.342883 51.730810 0.000000 0.000000 0.000000 0.217139 -3.460213 3393 27 -7.1492E+00 8.705940 2.923006 -21.801173 5.014477 -99.000000 51.730810 0.000000 0.059829 0.782861 0.645748 7 2.8747E+05 3.823790 6.544327 2.342883 -33.928912 -13.425946 49.075594 0.000002 0.000000 0.371884 0.189E+04 min_dr_div_cs log_rel_run_E_err -5.8859725809031342 rel_E_err 3.3568798181950225D-10 png/grid_003630.png/png k, q, energy_removed_layers before adjustment is 903 0.97873801414978379 9.4420515391541112E+049 k, q, energy_removed_layers after adjustment is 908 0.97790656330742942 9.4486568946451633E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11901.652343750000 max vel inside fraction of cutoff 1732.3601599615401 max c/cs inside fraction of cutoff 2.9102578173417055 average v/vesc outside cutoff 2.0051593332160458 Kinetic plus potential energy outside cutoff 9.4486568946451633E+049 mass inside cutoff 908 50.587898390501337 relax counter 0 log max v [km/s]= 5.6235344149061337 check gamma integral 5.0343982435768930E-002 Warning: maximum velocity exceeds speed of light 1 0.4202792959E+11 0.1401900831E+01 Warning: maximum velocity exceeds speed of light 1 0.4202823506E+11 0.1401911020E+01 Warning: maximum velocity exceeds speed of light 1 0.4202852121E+11 0.1401920565E+01 Warning: maximum velocity exceeds speed of light 1 0.4202879476E+11 0.1401929690E+01 Warning: maximum velocity exceeds speed of light 1 0.4202905592E+11 0.1401938401E+01 Warning: maximum velocity exceeds speed of light 1 0.4202936136E+11 0.1401948589E+01 Warning: maximum velocity exceeds speed of light 1 0.4202971644E+11 0.1401960433E+01 Warning: maximum velocity exceeds speed of light 1 0.4203001676E+11 0.1401970451E+01 Warning: maximum velocity exceeds speed of light 1 0.4203029427E+11 0.1401979708E+01 Warning: maximum velocity exceeds speed of light 1 0.4203056048E+11 0.1401988588E+01 3640 8.703202 8561.822 -16.512480 2.335576 51.730810 0.000000 0.000000 0.000000 0.217139 -3.467399 3389 27 -7.2617E+00 8.703202 2.928343 -22.351994 4.991716 -99.000000 51.730810 0.000000 0.059829 0.782861 0.646052 6 2.8747E+05 3.816187 6.541644 2.335576 -34.290112 -13.436621 49.075594 0.000002 0.000000 0.371884 0.189E+04 min_dr_div_cs log_rel_run_E_err -5.8838422189527204 rel_E_err 2.1881755602805746D-09 png/grid_003640.png/png k, q, energy_removed_layers before adjustment is 903 0.97873801414978379 9.4446652495959692E+049 k, q, energy_removed_layers after adjustment is 908 0.97790656330742942 9.4513114380914830E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11918.794921875000 max vel inside fraction of cutoff 1759.0904871912321 max c/cs inside fraction of cutoff 2.8359648852415766 average v/vesc outside cutoff 2.0131766994524565 Kinetic plus potential energy outside cutoff 9.4513114380914830E+049 mass inside cutoff 908 50.587898390501337 relax counter 0 log max v [km/s]= 5.6235651813993330 check gamma integral 5.0429065823161111E-002 Warning: maximum velocity exceeds speed of light 1 0.4203086909E+11 0.1401998882E+01 Warning: maximum velocity exceeds speed of light 1 0.4203122387E+11 0.1402010716E+01 Warning: maximum velocity exceeds speed of light 1 0.4203150264E+11 0.1402020015E+01 Warning: maximum velocity exceeds speed of light 1 0.4203174878E+11 0.1402028225E+01 Warning: maximum velocity exceeds speed of light 1 0.4203198077E+11 0.1402035964E+01 Warning: maximum velocity exceeds speed of light 1 0.4203224752E+11 0.1402044861E+01 Warning: maximum velocity exceeds speed of light 1 0.4203255094E+11 0.1402054982E+01 Warning: maximum velocity exceeds speed of light 1 0.4203278638E+11 0.1402062836E+01 Warning: maximum velocity exceeds speed of light 1 0.4203299315E+11 0.1402069733E+01 Warning: maximum velocity exceeds speed of light 1 0.4203318835E+11 0.1402076244E+01 3650 8.701091 8482.847 -16.528507 2.329949 51.730810 0.000000 0.000000 0.000000 0.217139 -3.472938 3381 27 -7.2173E+00 8.701091 2.934787 -22.984303 4.974536 -99.000000 51.730810 0.000000 0.059829 0.782861 0.646287 6 2.8747E+05 3.810329 6.538433 2.329949 -34.569694 -13.449512 49.076694 0.000002 0.000000 0.371884 0.190E+04 min_dr_div_cs log_rel_run_E_err -5.8815373345373247 rel_E_err 2.3203833035456651D-10 save photos/x650 for model 3650 png/grid_003650.png/png k, q, energy_removed_layers before adjustment is 904 0.97873801414978401 9.4477508175750510E+049 k, q, energy_removed_layers after adjustment is 909 0.97790656330742964 9.4544518023188705E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11939.775390625000 max vel inside fraction of cutoff 1760.2576179515925 max c/cs inside fraction of cutoff 2.7157239285056929 average v/vesc outside cutoff 2.0229279691651234 Kinetic plus potential energy outside cutoff 9.4544518023188705E+049 mass inside cutoff 909 50.587898390501351 relax counter 0 log max v [km/s]= 5.6235923339009952 check gamma integral 5.0500325475148704E-002 Warning: maximum velocity exceeds speed of light 1 0.4203337460E+11 0.1402082457E+01 Warning: maximum velocity exceeds speed of light 1 0.4203354893E+11 0.1402088272E+01 Warning: maximum velocity exceeds speed of light 1 0.4203371098E+11 0.1402093677E+01 Warning: maximum velocity exceeds speed of light 1 0.4203386330E+11 0.1402098758E+01 Warning: maximum velocity exceeds speed of light 1 0.4203403470E+11 0.1402104475E+01 Warning: maximum velocity exceeds speed of light 1 0.4203422409E+11 0.1402110792E+01 Warning: maximum velocity exceeds speed of light 1 0.4203437356E+11 0.1402115778E+01 Warning: maximum velocity exceeds speed of light 1 0.4203450309E+11 0.1402120099E+01 Warning: maximum velocity exceeds speed of light 1 0.4203462091E+11 0.1402124029E+01 Warning: maximum velocity exceeds speed of light 1 0.4203472450E+11 0.1402127485E+01 3660 8.700372 8407.535 -16.533951 2.328033 51.730810 0.000000 0.000000 0.000000 0.217139 -3.474824 3376 27 -7.2067E+00 8.700372 2.941005 -23.564264 4.968681 -99.000000 51.730810 0.000000 0.059829 0.782861 0.646367 5 2.8747E+05 3.808335 6.535378 2.328033 -34.665226 -13.461952 49.075596 0.000002 0.000000 0.371884 0.191E+04 min_dr_div_cs log_rel_run_E_err -5.8796485529185665 rel_E_err 7.6895391981683606D-10 png/grid_003660.png/png k, q, energy_removed_layers before adjustment is 904 0.97873801414978401 9.4506591688983210E+049 k, q, energy_removed_layers after adjustment is 909 0.97790656330742964 9.4574155671082009E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11960.314453125000 max vel inside fraction of cutoff 1764.0199099107838 max c/cs inside fraction of cutoff 2.6813415251456489 average v/vesc outside cutoff 2.0324112020755769 Kinetic plus potential energy outside cutoff 9.4574155671082009E+049 mass inside cutoff 909 50.587898390501351 relax counter 0 log max v [km/s]= 5.6236082053716219 check gamma integral 5.0537084946890978E-002 Warning: maximum velocity exceeds speed of light 1 0.4203481520E+11 0.1402130510E+01 Warning: maximum velocity exceeds speed of light 1 0.4203491220E+11 0.1402133745E+01 Warning: maximum velocity exceeds speed of light 1 0.4203501160E+11 0.1402137061E+01 Warning: maximum velocity exceeds speed of light 1 0.4203510657E+11 0.1402140229E+01 Warning: maximum velocity exceeds speed of light 1 0.4203518574E+11 0.1402142870E+01 Warning: maximum velocity exceeds speed of light 1 0.4203522928E+11 0.1402144322E+01 Warning: maximum velocity exceeds speed of light 1 0.4203523972E+11 0.1402144670E+01 Warning: maximum velocity exceeds speed of light 1 0.4203519272E+11 0.1402143103E+01 Warning: maximum velocity exceeds speed of light 1 0.4203511753E+11 0.1402140595E+01 Warning: maximum velocity exceeds speed of light 1 0.4203502109E+11 0.1402137378E+01 3670 8.702280 8284.668 -16.519725 2.333116 51.730810 0.000000 0.000000 0.000000 0.217139 -3.469824 3372 27 -6.9356E+00 8.702280 2.951310 -24.451805 4.983424 -99.000000 51.730810 0.000000 0.059829 0.782861 0.646153 6 2.8747E+05 3.813626 6.530414 2.333116 -34.412765 -13.482566 49.075596 0.000002 0.000000 0.371884 0.192E+04 min_dr_div_cs log_rel_run_E_err -5.8775597411060270 rel_E_err 3.2108838456033165D-12 png/grid_003670.png/png k, q, energy_removed_layers before adjustment is 906 0.97873801414978401 9.4552882096467313E+049 k, q, energy_removed_layers after adjustment is 911 0.97790656330742964 9.4621339801892038E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11995.007812500000 max vel inside fraction of cutoff 1764.6956119542817 max c/cs inside fraction of cutoff 2.6490401673447637 average v/vesc outside cutoff 2.0482728853860781 Kinetic plus potential energy outside cutoff 9.4621339801892038E+049 mass inside cutoff 911 50.587898390501351 relax counter 0 log max v [km/s]= 5.6236112696461245 check gamma integral 5.0526854135149173E-002 Warning: maximum velocity exceeds speed of light 1 0.4203490452E+11 0.1402133489E+01 Warning: maximum velocity exceeds speed of light 1 0.4203477017E+11 0.1402129008E+01 Warning: maximum velocity exceeds speed of light 1 0.4203462171E+11 0.1402124056E+01 Warning: maximum velocity exceeds speed of light 1 0.4203446080E+11 0.1402118688E+01 Warning: maximum velocity exceeds speed of light 1 0.4203428568E+11 0.1402112847E+01 Warning: maximum velocity exceeds speed of light 1 0.4203409446E+11 0.1402106468E+01 Warning: maximum velocity exceeds speed of light 1 0.4203383982E+11 0.1402097975E+01 Warning: maximum velocity exceeds speed of light 1 0.4203349819E+11 0.1402086579E+01 Warning: maximum velocity exceeds speed of light 1 0.4203318019E+11 0.1402075972E+01 Warning: maximum velocity exceeds speed of light 1 0.4203285749E+11 0.1402065208E+01 3680 8.707252 8172.471 -16.482197 2.346368 51.730810 0.000000 0.000000 0.000000 0.217139 -3.456798 3365 27 -6.9746E+00 8.707252 2.960930 -25.174573 5.023389 -99.000000 51.730810 0.000000 0.059829 0.782861 0.645596 5 2.8747E+05 3.827421 6.525968 2.346368 -33.758406 -13.501811 49.075596 0.000002 0.000000 0.371884 0.193E+04 min_dr_div_cs log_rel_run_E_err -5.8714380383199405 rel_E_err 6.2652826541034099D-09 png/grid_003680.png/png k, q, energy_removed_layers before adjustment is 907 0.97873801414978401 9.4594830950692737E+049 k, q, energy_removed_layers after adjustment is 912 0.97790656330742964 9.4664024921424855E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12028.150390625000 max vel inside fraction of cutoff 1761.3402150135553 max c/cs inside fraction of cutoff 2.6174298256702979 average v/vesc outside cutoff 2.0632671427788281 Kinetic plus potential energy outside cutoff 9.4664024921424855E+049 mass inside cutoff 912 50.587898390501351 relax counter 0 log max v [km/s]= 5.6235889153041185 check gamma integral 5.0438603034958826E-002 Warning: maximum velocity exceeds speed of light 1 0.4203251843E+11 0.1402053898E+01 Warning: maximum velocity exceeds speed of light 1 0.4203216139E+11 0.1402041988E+01 Warning: maximum velocity exceeds speed of light 1 0.4203179275E+11 0.1402029692E+01 Warning: maximum velocity exceeds speed of light 1 0.4203141376E+11 0.1402017050E+01 Warning: maximum velocity exceeds speed of light 1 0.4203101818E+11 0.1402003855E+01 Warning: maximum velocity exceeds speed of light 1 0.4203051603E+11 0.1401987105E+01 Warning: maximum velocity exceeds speed of light 1 0.4202987409E+11 0.1401965692E+01 Warning: maximum velocity exceeds speed of light 1 0.4202929940E+11 0.1401946523E+01 Warning: maximum velocity exceeds speed of light 1 0.4202873119E+11 0.1401927569E+01 Warning: maximum velocity exceeds speed of light 1 0.4202814229E+11 0.1401907925E+01 3690 8.715429 8059.077 -16.420236 2.368162 51.730810 0.000000 0.000000 0.000000 0.217139 -3.435406 3377 27 -6.9518E+00 8.715429 2.970807 -25.765385 5.091434 -99.000000 51.730810 0.000000 0.059829 0.782861 0.644684 5 2.8747E+05 3.850108 6.521448 2.368162 -32.696949 -13.521568 49.075596 0.000002 0.000000 0.371884 0.194E+04 min_dr_div_cs log_rel_run_E_err -5.8659157213558384 rel_E_err 1.0097360204663703D-09 png/grid_003690.png/png k, q, energy_removed_layers before adjustment is 906 0.97873801414978401 9.4636515651633187E+049 k, q, energy_removed_layers after adjustment is 911 0.97790656330742964 9.4706319465064176E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12062.949218750000 max vel inside fraction of cutoff 1763.2703736196283 max c/cs inside fraction of cutoff 2.5836466360639267 average v/vesc outside cutoff 2.0788566901674956 Kinetic plus potential energy outside cutoff 9.4706319465064176E+049 mass inside cutoff 911 50.587898390501351 relax counter 0 log max v [km/s]= 5.6235401938846472 check gamma integral 5.0264023283107202E-002 Warning: maximum velocity exceeds speed of light 1 0.4202753956E+11 0.1401887821E+01 Warning: maximum velocity exceeds speed of light 1 0.4202693402E+11 0.1401867622E+01 Warning: maximum velocity exceeds speed of light 1 0.4202631967E+11 0.1401847130E+01 Warning: maximum velocity exceeds speed of light 1 0.4202555175E+11 0.1401821514E+01 Warning: maximum velocity exceeds speed of light 1 0.4202458617E+11 0.1401789306E+01 Warning: maximum velocity exceeds speed of light 1 0.4202374122E+11 0.1401761122E+01 Warning: maximum velocity exceeds speed of light 1 0.4202292056E+11 0.1401733748E+01 Warning: maximum velocity exceeds speed of light 1 0.4202208109E+11 0.1401705746E+01 Warning: maximum velocity exceeds speed of light 1 0.4202123102E+11 0.1401677391E+01 Warning: maximum velocity exceeds speed of light 1 0.4202038880E+11 0.1401649297E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 8.727551 7941.801 -16.328911 2.400460 51.730810 0.000000 0.000000 0.000000 0.217139 -3.403749 3376 27 -6.9547E+00 8.727551 2.981162 -26.141301 5.196401 -99.000000 51.730810 0.000000 0.059829 0.782861 0.643340 5 2.8747E+05 3.883753 6.516693 2.400460 -31.158175 -13.542282 49.075596 0.000002 0.000000 0.371884 0.195E+04 min_dr_div_cs log_rel_run_E_err -5.8619721406375911 rel_E_err 2.8255568200689169D-11 save LOGS/profile23.data for model 3700 save photos/x700 for model 3700 png/grid_003700.png/png k, q, energy_removed_layers before adjustment is 905 0.97855469047153543 9.4702417092708492E+049 k, q, energy_removed_layers after adjustment is 909 0.97790656330742953 9.4748935009061210E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12100.298828125000 max vel inside fraction of cutoff 1748.1640961933131 max c/cs inside fraction of cutoff 2.5469378523696768 average v/vesc outside cutoff 2.0954076046408896 Kinetic plus potential energy outside cutoff 9.4748935009061210E+049 mass inside cutoff 909 50.587898390501351 relax counter 0 log max v [km/s]= 5.6234600664424272 check gamma integral 4.9983929489394993E-002 Warning: maximum velocity exceeds speed of light 1 0.4201954049E+11 0.1401621000E+01 Warning: maximum velocity exceeds speed of light 1 0.4201848975E+11 0.1401585952E+01 Warning: maximum velocity exceeds speed of light 1 0.4201718181E+11 0.1401542323E+01 Warning: maximum velocity exceeds speed of light 1 0.4201603388E+11 0.1401504032E+01 Warning: maximum velocity exceeds speed of light 1 0.4201491662E+11 0.1401466765E+01 Warning: maximum velocity exceeds speed of light 1 0.4201353241E+11 0.1401420592E+01 Warning: maximum velocity exceeds speed of light 1 0.4201180928E+11 0.1401363115E+01 Warning: maximum velocity exceeds speed of light 1 0.4201038158E+11 0.1401315492E+01 Warning: maximum velocity exceeds speed of light 1 0.4200908708E+11 0.1401272312E+01 Warning: maximum velocity exceeds speed of light 1 0.4200784292E+11 0.1401230811E+01 3710 8.746109 7809.859 -16.190267 2.449885 51.730810 0.000000 0.000000 0.000000 0.217139 -3.355424 3394 27 -6.9142E+00 8.746109 2.992990 -26.130468 5.370584 -99.000000 51.730810 0.000000 0.059829 0.782861 0.641299 5 2.8747E+05 3.935289 6.511246 2.449885 -28.880354 -13.565944 49.063528 0.000002 0.000000 0.371884 0.196E+04 min_dr_div_cs log_rel_run_E_err -5.8568743479308587 rel_E_err 2.3346988806512738D-11 png/grid_003710.png/png k, q, energy_removed_layers before adjustment is 906 0.97855469047153543 9.4748462804800795E+049 k, q, energy_removed_layers after adjustment is 910 0.97790656330742953 9.4795174220086538E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12144.076171875000 max vel inside fraction of cutoff 1753.4512678713390 max c/cs inside fraction of cutoff 2.5035419825057943 average v/vesc outside cutoff 2.1145625418034832 Kinetic plus potential energy outside cutoff 9.4795174220086538E+049 mass inside cutoff 910 50.587898390501351 relax counter 0 log max v [km/s]= 5.6233303813236075 check gamma integral 4.9529977422865336E-002 Warning: maximum velocity exceeds speed of light 1 0.4200662877E+11 0.1401190312E+01 Warning: maximum velocity exceeds speed of light 1 0.4200545323E+11 0.1401151100E+01 Warning: maximum velocity exceeds speed of light 1 0.4200429681E+11 0.1401112526E+01 Warning: maximum velocity exceeds speed of light 1 0.4200313714E+11 0.1401073844E+01 Warning: maximum velocity exceeds speed of light 1 0.4200171653E+11 0.1401026457E+01 Warning: maximum velocity exceeds speed of light 1 0.4199997018E+11 0.1400968205E+01 Warning: maximum velocity exceeds speed of light 1 0.4199848297E+11 0.1400918597E+01 Warning: maximum velocity exceeds speed of light 1 0.4199710535E+11 0.1400872645E+01 Warning: maximum velocity exceeds speed of light 1 0.4199576771E+11 0.1400828026E+01 Warning: maximum velocity exceeds speed of light 1 0.4199445096E+11 0.1400784104E+01 3720 8.765470 7702.579 -16.047105 2.501451 51.730810 0.000000 0.000000 0.000000 0.217139 -3.305112 3413 27 -6.9720E+00 8.765470 3.002764 -25.762315 5.577661 -99.000000 51.730810 0.000000 0.059829 0.782861 0.639211 5 2.8747E+05 3.989122 6.506765 2.501451 -26.600899 -13.585496 49.063528 0.000002 0.000000 0.371884 0.197E+04 lgRho_cntr log_rel_run_E_err -5.8567525884428484 rel_E_err 2.6171267701476036D-11 png/grid_003720.png/png k, q, energy_removed_layers before adjustment is 911 0.97855469047153532 9.4784254050122427E+049 k, q, energy_removed_layers after adjustment is 915 0.97790656330742942 9.4831006956310283E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12181.173828125000 max vel inside fraction of cutoff 1752.3084283702356 max c/cs inside fraction of cutoff 2.4821404083725276 average v/vesc outside cutoff 2.1305953864123719 Kinetic plus potential energy outside cutoff 9.4831006956310283E+049 mass inside cutoff 915 50.587898390501337 relax counter 0 log max v [km/s]= 5.6231919076691499 check gamma integral 4.9036460428432994E-002 Warning: maximum velocity exceeds speed of light 1 0.4199314559E+11 0.1400740561E+01 Warning: maximum velocity exceeds speed of light 1 0.4199184676E+11 0.1400697237E+01 Warning: maximum velocity exceeds speed of light 1 0.4199055201E+11 0.1400654049E+01 Warning: maximum velocity exceeds speed of light 1 0.4198926004E+11 0.1400610953E+01 Warning: maximum velocity exceeds speed of light 1 0.4198797013E+11 0.1400567926E+01 Warning: maximum velocity exceeds speed of light 1 0.4198668187E+11 0.1400524955E+01 Warning: maximum velocity exceeds speed of light 1 0.4198539500E+11 0.1400482030E+01 Warning: maximum velocity exceeds speed of light 1 0.4198410930E+11 0.1400439143E+01 Warning: maximum velocity exceeds speed of light 1 0.4198282459E+11 0.1400396290E+01 Warning: maximum velocity exceeds speed of light 1 0.4198154070E+11 0.1400353464E+01 3730 8.784068 7616.797 -15.911175 2.550995 51.730810 0.000000 0.000000 0.000000 0.217139 -3.256871 3415 27 -7.0395E+00 8.784068 3.010674 -25.147241 5.808282 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637249 5 2.8747E+05 4.040911 6.503131 2.550995 -24.500791 -13.601319 49.063528 0.000002 0.000000 0.371884 0.197E+04 lgRho_cntr log_rel_run_E_err -5.8566499054689656 rel_E_err 3.2866040367023470D-11 png/grid_003730.png/png k, q, energy_removed_layers before adjustment is 911 0.97855469047153543 9.4812767483937587E+049 k, q, energy_removed_layers after adjustment is 915 0.97790656330742953 9.4859495503997004E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12211.824218750000 max vel inside fraction of cutoff 1745.4286026508430 max c/cs inside fraction of cutoff 2.4854091627630619 average v/vesc outside cutoff 2.1437205603486507 Kinetic plus potential energy outside cutoff 9.4859495503997004E+049 mass inside cutoff 915 50.587898390501351 relax counter 0 log max v [km/s]= 5.6230583729601866 check gamma integral 4.8551468356818180E-002 Warning: maximum velocity exceeds speed of light 1 0.4198025746E+11 0.1400310660E+01 Warning: maximum velocity exceeds speed of light 1 0.4197897469E+11 0.1400267871E+01 Warning: maximum velocity exceeds speed of light 1 0.4197769222E+11 0.1400225092E+01 Warning: maximum velocity exceeds speed of light 1 0.4197640990E+11 0.1400182319E+01 Warning: maximum velocity exceeds speed of light 1 0.4197512757E+11 0.1400139545E+01 Warning: maximum velocity exceeds speed of light 1 0.4197384505E+11 0.1400096765E+01 Warning: maximum velocity exceeds speed of light 1 0.4197256216E+11 0.1400053972E+01 Warning: maximum velocity exceeds speed of light 1 0.4197127870E+11 0.1400011160E+01 Warning: maximum velocity exceeds speed of light 1 0.4196999443E+11 0.1399968322E+01 Warning: maximum velocity exceeds speed of light 1 0.4196870910E+11 0.1399925448E+01 3740 8.802428 7542.720 -15.778458 2.599912 51.730810 0.000000 0.000000 0.000000 0.217139 -3.209346 3435 27 -7.0826E+00 8.802428 3.017576 -24.035744 6.069003 -99.000000 51.730810 0.000000 0.059829 0.782861 0.635352 5 2.8747E+05 4.092108 6.499957 2.599912 -22.509865 -13.615126 49.063528 0.000002 0.000000 0.371884 0.198E+04 lgRho_cntr log_rel_run_E_err -5.8565502456837706 rel_E_err 3.1758002398865586D-11 png/grid_003740.png/png k, q, energy_removed_layers before adjustment is 913 0.97855469047153543 9.4836741816302148E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.4883415456903296E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12239.035156250000 max vel inside fraction of cutoff 1742.4131661508427 max c/cs inside fraction of cutoff 2.4543794292443222 average v/vesc outside cutoff 2.1552834337868507 Kinetic plus potential energy outside cutoff 9.4883415456903296E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6229256111074051 check gamma integral 4.8063420567780672E-002 Warning: maximum velocity exceeds speed of light 1 0.4196742245E+11 0.1399882530E+01 Warning: maximum velocity exceeds speed of light 1 0.4196613420E+11 0.1399839558E+01 Warning: maximum velocity exceeds speed of light 1 0.4196484410E+11 0.1399796525E+01 Warning: maximum velocity exceeds speed of light 1 0.4196355190E+11 0.1399753422E+01 Warning: maximum velocity exceeds speed of light 1 0.4196225736E+11 0.1399710241E+01 Warning: maximum velocity exceeds speed of light 1 0.4196096025E+11 0.1399666974E+01 Warning: maximum velocity exceeds speed of light 1 0.4195966034E+11 0.1399623614E+01 Warning: maximum velocity exceeds speed of light 1 0.4195835740E+11 0.1399580152E+01 Warning: maximum velocity exceeds speed of light 1 0.4195705118E+11 0.1399536581E+01 Warning: maximum velocity exceeds speed of light 1 0.4195574142E+11 0.1399492893E+01 3750 8.820610 7475.860 -15.648427 2.648363 51.730810 0.000000 0.000000 0.000000 0.217139 -3.162389 3451 27 -7.1109E+00 8.820610 3.023847 -22.490034 6.355363 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633512 5 2.8747E+05 4.142873 6.497032 2.648363 -20.615637 -13.627671 49.063528 0.000002 0.000000 0.371884 0.199E+04 lgRho_cntr log_rel_run_E_err -5.8564517254942556 rel_E_err 3.4126284048562607D-11 save photos/x750 for model 3750 png/grid_003750.png/png k, q, energy_removed_layers before adjustment is 913 0.97855469047153543 9.4858531337896793E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.4905134741758358E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12264.146484375000 max vel inside fraction of cutoff 1747.2122647637170 max c/cs inside fraction of cutoff 2.4267321814259026 average v/vesc outside cutoff 2.1658866172438485 Kinetic plus potential energy outside cutoff 9.4905134741758358E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6227914001232353 check gamma integral 4.7570412547618797E-002 Warning: maximum velocity exceeds speed of light 1 0.4195442784E+11 0.1399449076E+01 Warning: maximum velocity exceeds speed of light 1 0.4195311016E+11 0.1399405123E+01 Warning: maximum velocity exceeds speed of light 1 0.4195178807E+11 0.1399361023E+01 Warning: maximum velocity exceeds speed of light 1 0.4195046121E+11 0.1399316764E+01 Warning: maximum velocity exceeds speed of light 1 0.4194912926E+11 0.1399272334E+01 Warning: maximum velocity exceeds speed of light 1 0.4194779182E+11 0.1399227722E+01 Warning: maximum velocity exceeds speed of light 1 0.4194644853E+11 0.1399182915E+01 Warning: maximum velocity exceeds speed of light 1 0.4194509900E+11 0.1399137899E+01 Warning: maximum velocity exceeds speed of light 1 0.4194374281E+11 0.1399092662E+01 Warning: maximum velocity exceeds speed of light 1 0.4194237955E+11 0.1399047188E+01 3760 8.838615 7413.635 -15.520986 2.696370 51.730810 0.000000 0.000000 0.000000 0.217139 -3.115994 3484 27 -7.1247E+00 8.838615 3.029745 -20.839228 6.658104 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631728 5 2.8747E+05 4.193215 6.494308 2.696370 -18.812457 -13.639470 49.059107 0.000002 0.000000 0.371884 0.199E+04 lgRho_cntr log_rel_run_E_err -5.8563599819111927 rel_E_err 3.0276780732656791D-11 png/grid_003760.png/png k, q, energy_removed_layers before adjustment is 912 0.97855469047153532 9.4878566952488869E+049 k, q, energy_removed_layers after adjustment is 916 0.97790656330742942 9.4925089667611026E+049 Layers above q= 0.97790656330742942 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12288.105468750000 max vel inside fraction of cutoff 1749.2836204384837 max c/cs inside fraction of cutoff 2.4007352613156954 average v/vesc outside cutoff 2.1759369043363996 Kinetic plus potential energy outside cutoff 9.4925089667611026E+049 mass inside cutoff 916 50.587898390501337 relax counter 0 log max v [km/s]= 5.6226530659480760 check gamma integral 4.7071257756175919E-002 Warning: maximum velocity exceeds speed of light 1 0.4194100877E+11 0.1399001464E+01 Warning: maximum velocity exceeds speed of light 1 0.4193963002E+11 0.1398955474E+01 Warning: maximum velocity exceeds speed of light 1 0.4193824281E+11 0.1398909202E+01 Warning: maximum velocity exceeds speed of light 1 0.4193656505E+11 0.1398853238E+01 Warning: maximum velocity exceeds speed of light 1 0.4193453294E+11 0.1398785454E+01 Warning: maximum velocity exceeds speed of light 1 0.4193282367E+11 0.1398728439E+01 Warning: maximum velocity exceeds speed of light 1 0.4193124912E+11 0.1398675917E+01 Warning: maximum velocity exceeds speed of light 1 0.4192973129E+11 0.1398625288E+01 Warning: maximum velocity exceeds speed of light 1 0.4192823409E+11 0.1398575347E+01 Warning: maximum velocity exceeds speed of light 1 0.4192673982E+11 0.1398525503E+01 3770 8.858210 7347.426 -15.383748 2.752253 51.730810 0.000000 0.000000 0.000000 0.217139 -3.065641 3493 27 -7.1157E+00 8.858210 3.036080 -19.067654 6.998738 -99.000000 51.730810 0.000000 0.059829 0.782861 0.629828 5 2.8747E+05 4.248077 6.491395 2.752253 -16.928596 -13.652144 49.059107 0.000002 0.000000 0.371884 0.200E+04 lgRho_cntr log_rel_run_E_err -5.8562663396805110 rel_E_err 1.8841105789752226D-11 png/grid_003770.png/png k, q, energy_removed_layers before adjustment is 912 0.97855469047153543 9.4899596232700037E+049 k, q, energy_removed_layers after adjustment is 916 0.97790656330742953 9.4946019117206548E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12314.212890625000 max vel inside fraction of cutoff 1752.4230067608589 max c/cs inside fraction of cutoff 2.3725015332716048 average v/vesc outside cutoff 2.1868179629440276 Kinetic plus potential energy outside cutoff 9.4946019117206548E+049 mass inside cutoff 916 50.587898390501351 relax counter 0 log max v [km/s]= 5.6224910934473149 check gamma integral 4.6513381762224477E-002 Warning: maximum velocity exceeds speed of light 1 0.4192523933E+11 0.1398475452E+01 Warning: maximum velocity exceeds speed of light 1 0.4192342529E+11 0.1398414942E+01 Warning: maximum velocity exceeds speed of light 1 0.4192122906E+11 0.1398341684E+01 Warning: maximum velocity exceeds speed of light 1 0.4191936921E+11 0.1398279646E+01 Warning: maximum velocity exceeds speed of light 1 0.4191764445E+11 0.1398222114E+01 Warning: maximum velocity exceeds speed of light 1 0.4191597105E+11 0.1398166296E+01 Warning: maximum velocity exceeds speed of light 1 0.4191430993E+11 0.1398110887E+01 Warning: maximum velocity exceeds speed of light 1 0.4191230157E+11 0.1398043895E+01 Warning: maximum velocity exceeds speed of light 1 0.4190986996E+11 0.1397962785E+01 Warning: maximum velocity exceeds speed of light 1 0.4190780236E+11 0.1397893818E+01 3780 8.878859 7274.594 -15.240785 2.813011 51.730810 0.000000 0.000000 0.000000 0.217139 -3.012721 3500 27 -7.0065E+00 8.878859 3.043105 -17.261921 7.360305 -99.000000 51.730810 0.000000 0.059829 0.782861 0.627877 5 2.8747E+05 4.305980 6.488139 2.813011 -15.028451 -13.666196 49.059107 0.000002 0.000000 0.371884 0.201E+04 lgRho_cntr log_rel_run_E_err -5.8561271878815502 rel_E_err 5.1426241800943302D-11 png/grid_003780.png/png k, q, energy_removed_layers before adjustment is 912 0.97855469047153543 9.4922327328703391E+049 k, q, energy_removed_layers after adjustment is 916 0.97790656330742953 9.4968626122475337E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12343.621093750000 max vel inside fraction of cutoff 1755.0308354359270 max c/cs inside fraction of cutoff 2.3406070267227581 average v/vesc outside cutoff 2.1989870634462765 Kinetic plus potential energy outside cutoff 9.4968626122475337E+049 mass inside cutoff 916 50.587898390501351 relax counter 0 log max v [km/s]= 5.6222948871157801 check gamma integral 4.5905323274183590E-002 Warning: maximum velocity exceeds speed of light 1 0.4190587247E+11 0.1397829443E+01 Warning: maximum velocity exceeds speed of light 1 0.4190398591E+11 0.1397766514E+01 Warning: maximum velocity exceeds speed of light 1 0.4190209782E+11 0.1397703535E+01 Warning: maximum velocity exceeds speed of light 1 0.4189981455E+11 0.1397627373E+01 Warning: maximum velocity exceeds speed of light 1 0.4189704939E+11 0.1397535137E+01 Warning: maximum velocity exceeds speed of light 1 0.4189464717E+11 0.1397455008E+01 Warning: maximum velocity exceeds speed of light 1 0.4189236199E+11 0.1397378782E+01 Warning: maximum velocity exceeds speed of light 1 0.4189008788E+11 0.1397302926E+01 Warning: maximum velocity exceeds speed of light 1 0.4188733603E+11 0.1397211134E+01 Warning: maximum velocity exceeds speed of light 1 0.4188400095E+11 0.1397099888E+01 3790 8.898240 7192.135 -15.108081 2.870825 51.730810 0.000000 0.000000 0.000000 0.217139 -2.963130 3514 27 -6.8323E+00 8.898240 3.051145 -15.502154 7.695985 -99.000000 51.730810 0.000000 0.059829 0.782861 0.626103 5 2.8747E+05 4.360438 6.484414 2.870825 -13.320591 -13.682279 49.059107 0.000002 0.000000 0.371884 0.201E+04 lgRho_cntr log_rel_run_E_err -5.8558986563742437 rel_E_err 1.4207020896217899D-10 png/grid_003790.png/png k, q, energy_removed_layers before adjustment is 913 0.97855469047153543 9.4947597593193331E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.4993739335954153E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12377.886718750000 max vel inside fraction of cutoff 1817.8490483569688 max c/cs inside fraction of cutoff 2.3031955950218981 average v/vesc outside cutoff 2.2130505592499121 Kinetic plus potential energy outside cutoff 9.4993739335954153E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6220481607261164 check gamma integral 4.5306571459977261E-002 Warning: maximum velocity exceeds speed of light 1 0.4188101954E+11 0.1397000439E+01 Warning: maximum velocity exceeds speed of light 1 0.4187809609E+11 0.1396902923E+01 Warning: maximum velocity exceeds speed of light 1 0.4187455322E+11 0.1396784746E+01 Warning: maximum velocity exceeds speed of light 1 0.4187025185E+11 0.1396641267E+01 Warning: maximum velocity exceeds speed of light 1 0.4186670513E+11 0.1396522962E+01 Warning: maximum velocity exceeds speed of light 1 0.4186240108E+11 0.1396379394E+01 Warning: maximum velocity exceeds speed of light 1 0.4185716745E+11 0.1396204819E+01 Warning: maximum velocity exceeds speed of light 1 0.4185275446E+11 0.1396057617E+01 Warning: maximum velocity exceeds speed of light 1 0.4184894160E+11 0.1395930434E+01 Warning: maximum velocity exceeds speed of light 1 0.4184566108E+11 0.1395821008E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 8.910782 7075.300 -15.022813 2.909422 51.730810 0.000000 0.000000 0.000000 0.217139 -2.931039 3557 27 -6.8830E+00 8.910782 3.062705 -13.771708 7.909962 -99.000000 51.730810 0.000000 0.059829 0.782861 0.624993 5 2.8747E+05 4.395753 6.479083 2.909422 -12.252452 -13.705404 49.059107 0.000002 0.000000 0.371884 0.202E+04 min_dr_div_cs log_rel_run_E_err -5.8556955936394655 rel_E_err 1.0634851262500451D-11 save LOGS/profile24.data for model 3800 save photos/x800 for model 3800 png/grid_003800.png/png k, q, energy_removed_layers before adjustment is 913 0.97855469047153543 9.4982198900882060E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.5028089342814287E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12428.322265625000 max vel inside fraction of cutoff 2102.9891832638045 max c/cs inside fraction of cutoff 2.2475434702220047 average v/vesc outside cutoff 2.2335222954331919 Kinetic plus potential energy outside cutoff 9.5028089342814287E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6216504332903723 check gamma integral 4.4879736456909153E-002 Warning: maximum velocity exceeds speed of light 1 0.4184279297E+11 0.1395725338E+01 Warning: maximum velocity exceeds speed of light 1 0.4184015289E+11 0.1395637274E+01 Warning: maximum velocity exceeds speed of light 1 0.4183696205E+11 0.1395530839E+01 Warning: maximum velocity exceeds speed of light 1 0.4183310044E+11 0.1395402030E+01 Warning: maximum velocity exceeds speed of light 1 0.4182999041E+11 0.1395298290E+01 Warning: maximum velocity exceeds speed of light 1 0.4182725768E+11 0.1395207136E+01 Warning: maximum velocity exceeds speed of light 1 0.4182395587E+11 0.1395097000E+01 Warning: maximum velocity exceeds speed of light 1 0.4181996146E+11 0.1394963761E+01 Warning: maximum velocity exceeds speed of light 1 0.4181668602E+11 0.1394854504E+01 Warning: maximum velocity exceeds speed of light 1 0.4181366444E+11 0.1394753715E+01 3810 8.905891 6988.886 -15.055827 2.894291 51.730810 0.000000 0.000000 0.000000 0.217139 -2.943616 3575 27 -6.9483E+00 8.905891 3.071383 -13.285118 7.827426 -99.000000 51.730810 0.000000 0.059829 0.782861 0.625409 5 2.8747E+05 4.381947 6.475091 2.894291 -12.664853 -13.722763 49.059107 0.000002 0.000000 0.371884 0.203E+04 min_dr_div_cs log_rel_run_E_err -5.8552202676938174 rel_E_err 2.5701314979536232D-11 png/grid_003810.png/png k, q, energy_removed_layers before adjustment is 914 0.97855469047153543 9.5007477449584105E+049 k, q, energy_removed_layers after adjustment is 918 0.97790656330742953 9.5053160731398404E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12467.103515625000 max vel inside fraction of cutoff 2278.9819752657845 max c/cs inside fraction of cutoff 2.2042529802240671 average v/vesc outside cutoff 2.2491041254814812 Kinetic plus potential energy outside cutoff 9.5053160731398404E+049 mass inside cutoff 918 50.587898390501351 relax counter 0 log max v [km/s]= 5.6213182296875672 check gamma integral 4.5006986668332610E-002 Warning: maximum velocity exceeds speed of light 1 0.4181065267E+11 0.1394653253E+01 Warning: maximum velocity exceeds speed of light 1 0.4180765856E+11 0.1394553380E+01 Warning: maximum velocity exceeds speed of light 1 0.4180464656E+11 0.1394452911E+01 Warning: maximum velocity exceeds speed of light 1 0.4180174667E+11 0.1394356180E+01 Warning: maximum velocity exceeds speed of light 1 0.4179898335E+11 0.1394264006E+01 Warning: maximum velocity exceeds speed of light 1 0.4179630550E+11 0.1394174683E+01 Warning: maximum velocity exceeds speed of light 1 0.4179370371E+11 0.1394087896E+01 Warning: maximum velocity exceeds speed of light 1 0.4179114857E+11 0.1394002666E+01 Warning: maximum velocity exceeds speed of light 1 0.4178864259E+11 0.1393919075E+01 Warning: maximum velocity exceeds speed of light 1 0.4178561980E+11 0.1393818246E+01 3820 8.893676 6919.705 -15.138874 2.857037 51.730810 0.000000 0.000000 0.000000 0.217139 -2.975076 3557 27 -6.9702E+00 8.893676 3.078425 -13.464193 7.618629 -99.000000 51.730810 0.000000 0.059829 0.782861 0.626459 6 2.8747E+05 4.347486 6.471893 2.857037 -13.714840 -13.736849 49.059107 0.000002 0.000000 0.371884 0.204E+04 max increase log_rel_run_E_err -5.8509948596617312 rel_E_err 1.9340992518467010D-10 png/grid_003820.png/png k, q, energy_removed_layers before adjustment is 915 0.97839430880916911 9.5046404467400682E+049 k, q, energy_removed_layers after adjustment is 918 0.97790656330742953 9.5072893099385824E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12499.171875000000 max vel inside fraction of cutoff 2325.3402280336772 max c/cs inside fraction of cutoff 2.1681174883767329 average v/vesc outside cutoff 2.2618788142430888 Kinetic plus potential energy outside cutoff 9.5072893099385824E+049 mass inside cutoff 918 50.587898390501351 relax counter 0 log max v [km/s]= 5.6210268484060570 check gamma integral 4.5363566052093560E-002 Warning: maximum velocity exceeds speed of light 1 0.4178197007E+11 0.1393696504E+01 Warning: maximum velocity exceeds speed of light 1 0.4177865190E+11 0.1393585822E+01 Warning: maximum velocity exceeds speed of light 1 0.4177535478E+11 0.1393475842E+01 Warning: maximum velocity exceeds speed of light 1 0.4177210158E+11 0.1393367327E+01 Warning: maximum velocity exceeds speed of light 1 0.4176916291E+11 0.1393269303E+01 Warning: maximum velocity exceeds speed of light 1 0.4176656455E+11 0.1393182631E+01 Warning: maximum velocity exceeds speed of light 1 0.4176343118E+11 0.1393078113E+01 Warning: maximum velocity exceeds speed of light 1 0.4175964912E+11 0.1392951957E+01 Warning: maximum velocity exceeds speed of light 1 0.4175655650E+11 0.1392848799E+01 Warning: maximum velocity exceeds speed of light 1 0.4175377954E+11 0.1392756169E+01 3830 8.874960 6847.153 -15.267265 2.801520 51.730810 0.000000 0.000000 0.000000 0.217139 -3.023405 3550 27 -7.0291E+00 8.874960 3.085892 -14.231715 7.293904 -99.000000 51.730810 0.000000 0.059829 0.782861 0.628096 6 2.8747E+05 4.294739 6.468517 2.801520 -15.378550 -13.751786 49.062920 0.000002 0.000000 0.371884 0.204E+04 lgRho_cntr log_rel_run_E_err -5.8491025657872635 rel_E_err 9.9494362116323264D-11 png/grid_003830.png/png k, q, energy_removed_layers before adjustment is 914 0.97839430880916911 9.5066899828806757E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.5093222110132670E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12533.771484375000 max vel inside fraction of cutoff 2212.0867717219280 max c/cs inside fraction of cutoff 2.1287707066535941 average v/vesc outside cutoff 2.2755560771410481 Kinetic plus potential energy outside cutoff 9.5093222110132670E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6206957938105759 check gamma integral 4.5901987903275890E-002 Warning: maximum velocity exceeds speed of light 1 0.4175043055E+11 0.1392644459E+01 Warning: maximum velocity exceeds speed of light 1 0.4174638786E+11 0.1392509610E+01 Warning: maximum velocity exceeds speed of light 1 0.4174300066E+11 0.1392396625E+01 Warning: maximum velocity exceeds speed of light 1 0.4173991171E+11 0.1392293588E+01 Warning: maximum velocity exceeds speed of light 1 0.4173696813E+11 0.1392195401E+01 Warning: maximum velocity exceeds speed of light 1 0.4173409839E+11 0.1392099677E+01 Warning: maximum velocity exceeds speed of light 1 0.4173126691E+11 0.1392005229E+01 Warning: maximum velocity exceeds speed of light 1 0.4172845504E+11 0.1391911435E+01 Warning: maximum velocity exceeds speed of light 1 0.4172570884E+11 0.1391819831E+01 Warning: maximum velocity exceeds speed of light 1 0.4172301326E+11 0.1391729917E+01 3840 8.855282 6782.068 -15.403735 2.743171 51.730810 0.000000 0.000000 0.000000 0.217139 -3.074334 3571 27 -7.0609E+00 8.855282 3.092661 -15.248117 6.949714 -99.000000 51.730810 0.000000 0.059829 0.782861 0.629865 6 2.8747E+05 4.239370 6.465463 2.743171 -17.202323 -13.765327 49.062920 0.000002 0.000000 0.371884 0.205E+04 min_dr_div_cs log_rel_run_E_err -5.8463295391187247 rel_E_err 1.2257969430818064D-09 png/grid_003840.png/png k, q, energy_removed_layers before adjustment is 914 0.97839430880916911 9.5084978292702617E+049 k, q, energy_removed_layers after adjustment is 917 0.97790656330742953 9.5111142236181482E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12565.683593750000 max vel inside fraction of cutoff 2067.1260721484832 max c/cs inside fraction of cutoff 2.0921649174059209 average v/vesc outside cutoff 2.2880723347908898 Kinetic plus potential energy outside cutoff 9.5111142236181482E+049 mass inside cutoff 917 50.587898390501351 relax counter 0 log max v [km/s]= 5.6203756659167317 check gamma integral 4.6455628403074531E-002 Warning: maximum velocity exceeds speed of light 1 0.4171976460E+11 0.1391621553E+01 Warning: maximum velocity exceeds speed of light 1 0.4171584616E+11 0.1391490848E+01 Warning: maximum velocity exceeds speed of light 1 0.4171267989E+11 0.1391385232E+01 Warning: maximum velocity exceeds speed of light 1 0.4170976073E+11 0.1391287860E+01 Warning: maximum velocity exceeds speed of light 1 0.4170687622E+11 0.1391191643E+01 Warning: maximum velocity exceeds speed of light 1 0.4170400098E+11 0.1391095735E+01 Warning: maximum velocity exceeds speed of light 1 0.4170112174E+11 0.1390999694E+01 Warning: maximum velocity exceeds speed of light 1 0.4169826527E+11 0.1390904413E+01 Warning: maximum velocity exceeds speed of light 1 0.4169482315E+11 0.1390789596E+01 Warning: maximum velocity exceeds speed of light 1 0.4169067199E+11 0.1390651128E+01 3850 8.835192 6718.221 -15.544676 2.686728 51.730810 0.000000 0.000000 0.000000 0.217139 -3.126461 3550 27 -6.8911E+00 8.835192 3.099373 -16.506299 6.602153 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631720 7 2.8747E+05 4.182931 6.462458 2.686728 -19.146717 -13.778755 49.062920 0.000002 0.000000 0.371884 0.205E+04 lgRho_cntr log_rel_run_E_err -5.8429472707191845 rel_E_err 1.1830505541298204D-10 save photos/x850 for model 3850 png/grid_003850.png/png k, q, energy_removed_layers before adjustment is 915 0.97839430880916922 9.5102445415168187E+049 k, q, energy_removed_layers after adjustment is 918 0.97790656330742964 9.5128445582075905E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12597.849609375000 max vel inside fraction of cutoff 1847.2826817279026 max c/cs inside fraction of cutoff 2.0549571731747753 average v/vesc outside cutoff 2.3005972709521507 Kinetic plus potential energy outside cutoff 9.5128445582075905E+049 mass inside cutoff 918 50.587898390501351 relax counter 0 log max v [km/s]= 5.6200388953618541 check gamma integral 4.7012071370986792E-002 Warning: maximum velocity exceeds speed of light 1 0.4168715350E+11 0.1390533764E+01 Warning: maximum velocity exceeds speed of light 1 0.4168389789E+11 0.1390425168E+01 Warning: maximum velocity exceeds speed of light 1 0.4168075037E+11 0.1390320178E+01 Warning: maximum velocity exceeds speed of light 1 0.4167763981E+11 0.1390216421E+01 Warning: maximum velocity exceeds speed of light 1 0.4167453157E+11 0.1390112741E+01 Warning: maximum velocity exceeds speed of light 1 0.4167078591E+11 0.1389987800E+01 Warning: maximum velocity exceeds speed of light 1 0.4166626850E+11 0.1389837115E+01 Warning: maximum velocity exceeds speed of light 1 0.4166244839E+11 0.1389709690E+01 Warning: maximum velocity exceeds speed of light 1 0.4165891019E+11 0.1389591668E+01 Warning: maximum velocity exceeds speed of light 1 0.4165548146E+11 0.1389477298E+01 3860 8.815380 6653.280 -15.685323 2.633729 51.730810 0.000000 0.000000 0.000000 0.217139 -3.177994 3552 27 -6.9914E+00 8.815380 3.106276 -17.919593 6.273318 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633597 6 2.8747E+05 4.127360 6.459388 2.633729 -21.149587 -13.792562 49.062920 0.000002 0.000000 0.371884 0.206E+04 lgRho_cntr log_rel_run_E_err -5.8420830406878261 rel_E_err 3.1861266757444908D-12 png/grid_003860.png/png k, q, energy_removed_layers before adjustment is 916 0.97839430880916922 9.5119567072915303E+049 k, q, energy_removed_layers after adjustment is 919 0.97790656330742964 9.5145392288690316E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12631.470703125000 max vel inside fraction of cutoff 1761.1731269047764 max c/cs inside fraction of cutoff 2.0157387292385298 average v/vesc outside cutoff 2.3135806835437474 Kinetic plus potential energy outside cutoff 9.5145392288690316E+049 mass inside cutoff 919 50.587898390501351 relax counter 0 log max v [km/s]= 5.6196721584628575 check gamma integral 4.7555934867025224E-002 Warning: maximum velocity exceeds speed of light 1 0.4165208326E+11 0.1389363947E+01 Warning: maximum velocity exceeds speed of light 1 0.4164798788E+11 0.1389227339E+01 Warning: maximum velocity exceeds speed of light 1 0.4164304830E+11 0.1389062573E+01 Warning: maximum velocity exceeds speed of light 1 0.4163886703E+11 0.1388923101E+01 Warning: maximum velocity exceeds speed of light 1 0.4163498435E+11 0.1388793588E+01 Warning: maximum velocity exceeds speed of light 1 0.4163120972E+11 0.1388667680E+01 Warning: maximum velocity exceeds speed of light 1 0.4162745550E+11 0.1388542453E+01 Warning: maximum velocity exceeds speed of light 1 0.4162293052E+11 0.1388391516E+01 Warning: maximum velocity exceeds speed of light 1 0.4161747186E+11 0.1388209434E+01 Warning: maximum velocity exceeds speed of light 1 0.4161280966E+11 0.1388053920E+01 3870 8.794908 6579.983 -15.832306 2.578982 51.730810 0.000000 0.000000 0.000000 0.217139 -3.231393 3548 27 -6.8765E+00 8.794908 3.114162 -19.558132 5.961271 -99.000000 51.730810 0.000000 0.059829 0.782861 0.635581 5 2.8747E+05 4.070017 6.455917 2.578982 -23.312293 -13.808339 49.062920 0.000002 0.000000 0.371884 0.207E+04 lgRho_cntr log_rel_run_E_err -5.8414383813503603 rel_E_err 1.9244224258316306D-09 png/grid_003870.png/png k, q, energy_removed_layers before adjustment is 921 0.97839430880916911 9.5137822212314834E+049 k, q, energy_removed_layers after adjustment is 924 0.97790656330742953 9.5163440172108495E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12670.583984375000 max vel inside fraction of cutoff 1747.1267613351056 max c/cs inside fraction of cutoff 1.9697026999792513 average v/vesc outside cutoff 2.3285281903860779 Kinetic plus potential energy outside cutoff 9.5163440172108495E+049 mass inside cutoff 924 50.587898390501351 relax counter 0 log max v [km/s]= 5.6192270399487940 check gamma integral 4.8111591543848017E-002 Warning: maximum velocity exceeds speed of light 1 0.4160844707E+11 0.1387908400E+01 Warning: maximum velocity exceeds speed of light 1 0.4160417661E+11 0.1387765953E+01 Warning: maximum velocity exceeds speed of light 1 0.4159902748E+11 0.1387594196E+01 Warning: maximum velocity exceeds speed of light 1 0.4159281335E+11 0.1387386915E+01 Warning: maximum velocity exceeds speed of light 1 0.4158749568E+11 0.1387209537E+01 Warning: maximum velocity exceeds speed of light 1 0.4158249455E+11 0.1387042717E+01 Warning: maximum velocity exceeds speed of light 1 0.4157756816E+11 0.1386878390E+01 Warning: maximum velocity exceeds speed of light 1 0.4157162662E+11 0.1386680202E+01 Warning: maximum velocity exceeds speed of light 1 0.4156445417E+11 0.1386440955E+01 Warning: maximum velocity exceeds speed of light 1 0.4155821929E+11 0.1386232982E+01 3880 8.774831 6493.455 -15.978183 2.525303 51.730810 0.000000 0.000000 0.000000 0.217139 -3.283888 3530 27 -6.7712E+00 8.774831 3.123597 -21.427693 5.692524 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637574 5 2.8747E+05 4.013863 6.451791 2.525303 -25.529641 -13.827212 49.062920 0.000002 0.000000 0.371884 0.207E+04 lgRho_cntr log_rel_run_E_err -5.8389499604130881 rel_E_err 1.6144832061242368D-11 png/grid_003880.png/png k, q, energy_removed_layers before adjustment is 922 0.97839430880916911 9.5159493124485754E+049 k, q, energy_removed_layers after adjustment is 925 0.97790656330742953 9.5184854306533266E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12718.373046875000 max vel inside fraction of cutoff 1751.0401907262440 max c/cs inside fraction of cutoff 1.9233764539273122 average v/vesc outside cutoff 2.3466637274817885 Kinetic plus potential energy outside cutoff 9.5184854306533266E+049 mass inside cutoff 925 50.587898390501351 relax counter 0 log max v [km/s]= 5.6186569303741996 check gamma integral 4.8657437275783470E-002 Warning: maximum velocity exceeds speed of light 1 0.4155227848E+11 0.1386034818E+01 Warning: maximum velocity exceeds speed of light 1 0.4154510911E+11 0.1385795673E+01 Warning: maximum velocity exceeds speed of light 1 0.4153644806E+11 0.1385506771E+01 Warning: maximum velocity exceeds speed of light 1 0.4152891657E+11 0.1385255548E+01 Warning: maximum velocity exceeds speed of light 1 0.4152168669E+11 0.1385014385E+01 Warning: maximum velocity exceeds speed of light 1 0.4151295532E+11 0.1384723138E+01 Warning: maximum velocity exceeds speed of light 1 0.4150239828E+11 0.1384370993E+01 Warning: maximum velocity exceeds speed of light 1 0.4149293401E+11 0.1384055299E+01 Warning: maximum velocity exceeds speed of light 1 0.4148148688E+11 0.1383673464E+01 Warning: maximum velocity exceeds speed of light 1 0.4146762081E+11 0.1383210941E+01 3890 8.755141 6364.816 -16.123039 2.472666 51.730810 0.000000 0.000000 0.000000 0.217139 -3.335485 3518 27 -6.4527E+00 8.755141 3.137942 -23.611751 5.466402 -99.000000 51.730810 0.000000 0.059829 0.782861 0.639572 5 2.8747E+05 3.958872 6.445722 2.472666 -27.801510 -13.855908 49.062920 0.000002 0.000000 0.371884 0.208E+04 lgRho_cntr log_rel_run_E_err -5.8388131968399311 rel_E_err 3.2880837047097873D-11 png/grid_003890.png/png k, q, energy_removed_layers before adjustment is 922 0.97839430880916911 9.5191720504147721E+049 k, q, energy_removed_layers after adjustment is 925 0.97790656330742953 9.5217428724719531E+049 Layers above q= 0.97790656330742953 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12793.189453125000 max vel inside fraction of cutoff 1759.4647174366266 max c/cs inside fraction of cutoff 1.9830648804766113 average v/vesc outside cutoff 2.3747305257209210 Kinetic plus potential energy outside cutoff 9.5217428724719531E+049 mass inside cutoff 925 50.587898390501351 relax counter 0 log max v [km/s]= 5.6177091185526722 check gamma integral 4.9204197213486393E-002 Warning: maximum velocity exceeds speed of light 1 0.4145490855E+11 0.1382786906E+01 Warning: maximum velocity exceeds speed of light 1 0.4143949957E+11 0.1382272918E+01 Warning: maximum velocity exceeds speed of light 1 0.4142078891E+11 0.1381648798E+01 Warning: maximum velocity exceeds speed of light 1 0.4140421408E+11 0.1381095921E+01 Warning: maximum velocity exceeds speed of light 1 0.4138854859E+11 0.1380573376E+01 Warning: maximum velocity exceeds speed of light 1 0.4136954415E+11 0.1379939456E+01 Warning: maximum velocity exceeds speed of light 1 0.4134644767E+11 0.1379169041E+01 Warning: maximum velocity exceeds speed of light 1 0.4132718263E+11 0.1378526428E+01 Warning: maximum velocity exceeds speed of light 1 0.4130916794E+11 0.1377925523E+01 Warning: maximum velocity exceeds speed of light 1 0.4128731413E+11 0.1377196558E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 8.753746 6147.400 -16.133630 2.468922 51.730810 0.000000 0.000000 0.000000 0.217139 -3.339209 3504 27 -6.3002E+00 8.753746 3.162840 -25.326282 5.451072 -99.000000 51.730810 0.000000 0.059829 0.782861 0.639702 5 2.8747E+05 3.954951 6.435139 2.468922 -27.966997 -13.905712 49.062920 0.000002 0.000000 0.371884 0.210E+04 max increase log_rel_run_E_err -5.8384803347131031 rel_E_err 2.7581580521760647D-10 save LOGS/profile25.data for model 3900 save photos/x900 for model 3900 png/grid_003900.png/png k, q, energy_removed_layers before adjustment is 925 0.97839430880916922 9.5242911052321377E+049 k, q, energy_removed_layers after adjustment is 928 0.97790656330742964 9.5267858093317453E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12929.507812500000 max vel inside fraction of cutoff 1747.5666761515631 max c/cs inside fraction of cutoff 2.1237996914863415 average v/vesc outside cutoff 2.4204315084457719 Kinetic plus potential energy outside cutoff 9.5267858093317453E+049 mass inside cutoff 928 50.587898390501351 relax counter 0 log max v [km/s]= 5.6158166315650195 check gamma integral 4.9302278770375185E-002 Warning: maximum velocity exceeds speed of light 1 0.4126075479E+11 0.1376310634E+01 Warning: maximum velocity exceeds speed of light 1 0.4123929601E+11 0.1375594846E+01 Warning: maximum velocity exceeds speed of light 1 0.4122122475E+11 0.1374992054E+01 Warning: maximum velocity exceeds speed of light 1 0.4120574802E+11 0.1374475806E+01 Warning: maximum velocity exceeds speed of light 1 0.4119212175E+11 0.1374021282E+01 Warning: maximum velocity exceeds speed of light 1 0.4117981304E+11 0.1373610708E+01 Warning: maximum velocity exceeds speed of light 1 0.4116846510E+11 0.1373232181E+01 Warning: maximum velocity exceeds speed of light 1 0.4115784078E+11 0.1372877792E+01 Warning: maximum velocity exceeds speed of light 1 0.4114777978E+11 0.1372542193E+01 Warning: maximum velocity exceeds speed of light 1 0.4113817070E+11 0.1372221669E+01 3910 8.777307 5995.755 -15.960646 2.531684 51.730810 0.000000 0.000000 0.000000 0.217139 -3.278074 3495 27 -6.6854E+00 8.777307 3.180834 -24.898233 5.722717 -99.000000 51.730810 0.000000 0.059829 0.782861 0.637185 5 2.8747E+05 4.020498 6.427737 2.531684 -25.252132 -13.941707 49.062920 0.000002 0.000000 0.371884 0.211E+04 lgRho_cntr log_rel_run_E_err -5.8382099289207066 rel_E_err 1.3798864168062733D-11 png/grid_003910.png/png k, q, energy_removed_layers before adjustment is 927 0.97839430880916922 9.5277976218289086E+049 k, q, energy_removed_layers after adjustment is 930 0.97790656330742964 9.5302352733687447E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13033.427734375000 max vel inside fraction of cutoff 1735.9662129274720 max c/cs inside fraction of cutoff 2.2936343914667607 average v/vesc outside cutoff 2.4577121030197087 Kinetic plus potential energy outside cutoff 9.5302352733687447E+049 mass inside cutoff 930 50.587898390501351 relax counter 0 log max v [km/s]= 5.6142449759311397 check gamma integral 4.8714157369997117E-002 Warning: maximum velocity exceeds speed of light 1 0.4112893359E+11 0.1371913552E+01 Warning: maximum velocity exceeds speed of light 1 0.4112000913E+11 0.1371615864E+01 Warning: maximum velocity exceeds speed of light 1 0.4111135181E+11 0.1371327087E+01 Warning: maximum velocity exceeds speed of light 1 0.4110292563E+11 0.1371046020E+01 Warning: maximum velocity exceeds speed of light 1 0.4109470137E+11 0.1370771688E+01 Warning: maximum velocity exceeds speed of light 1 0.4108665475E+11 0.1370503282E+01 Warning: maximum velocity exceeds speed of light 1 0.4107876523E+11 0.1370240116E+01 Warning: maximum velocity exceeds speed of light 1 0.4107101514E+11 0.1369981600E+01 Warning: maximum velocity exceeds speed of light 1 0.4106338902E+11 0.1369727221E+01 Warning: maximum velocity exceeds speed of light 1 0.4105587320E+11 0.1369476520E+01 3920 8.796362 5920.179 -15.822436 2.582475 51.730810 0.000000 0.000000 0.000000 0.217139 -3.228695 3500 27 -6.8054E+00 8.796362 3.190010 -23.847289 5.981668 -99.000000 51.730810 0.000000 0.059829 0.782861 0.635209 5 2.8747E+05 4.073616 6.424053 2.582475 -23.156689 -13.960062 49.062920 0.000002 0.000000 0.371884 0.212E+04 lgRho_cntr log_rel_run_E_err -5.8381863919899635 rel_E_err 4.0966121252851389D-12 png/grid_003920.png/png k, q, energy_removed_layers before adjustment is 929 0.97823225888212517 9.5308879411779448E+049 k, q, energy_removed_layers after adjustment is 931 0.97790656330742964 9.5318972150483162E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13088.248046875000 max vel inside fraction of cutoff 1741.4231537018516 max c/cs inside fraction of cutoff 2.3764767030565199 average v/vesc outside cutoff 2.4770790828294462 Kinetic plus potential energy outside cutoff 9.5318972150483162E+049 mass inside cutoff 931 50.587898390501351 relax counter 0 log max v [km/s]= 5.6133752934307166 check gamma integral 4.8214146827311941E-002 Warning: maximum velocity exceeds speed of light 1 0.4104845546E+11 0.1369229091E+01 Warning: maximum velocity exceeds speed of light 1 0.4104112477E+11 0.1368984565E+01 Warning: maximum velocity exceeds speed of light 1 0.4103387104E+11 0.1368742607E+01 Warning: maximum velocity exceeds speed of light 1 0.4102668501E+11 0.1368502906E+01 Warning: maximum velocity exceeds speed of light 1 0.4101955804E+11 0.1368265176E+01 Warning: maximum velocity exceeds speed of light 1 0.4101248205E+11 0.1368029147E+01 Warning: maximum velocity exceeds speed of light 1 0.4100544942E+11 0.1367794563E+01 Warning: maximum velocity exceeds speed of light 1 0.4099845285E+11 0.1367561183E+01 Warning: maximum velocity exceeds speed of light 1 0.4099148532E+11 0.1367328771E+01 Warning: maximum velocity exceeds speed of light 1 0.4098454002E+11 0.1367097101E+01 3930 8.814676 5858.548 -15.691009 2.631303 51.730810 0.000000 0.000000 0.000000 0.217139 -3.181340 3513 27 -6.8502E+00 8.814676 3.197590 -22.415783 6.261831 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633350 5 2.8747E+05 4.124737 6.421033 2.631303 -21.223484 -13.975225 49.062920 0.000002 0.000000 0.371884 0.212E+04 lgRho_cntr log_rel_run_E_err -5.8381752480301126 rel_E_err 3.5428731357183200D-12 png/grid_003930.png/png k, q, energy_removed_layers before adjustment is 929 0.97823225888212517 9.5322566400777579E+049 k, q, energy_removed_layers after adjustment is 931 0.97790656330742964 9.5332345142069642E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13134.503906250000 max vel inside fraction of cutoff 1756.7619419907164 max c/cs inside fraction of cutoff 2.4171822674389052 average v/vesc outside cutoff 2.4932843959760249 Kinetic plus potential energy outside cutoff 9.5332345142069642E+049 mass inside cutoff 931 50.587898390501351 relax counter 0 log max v [km/s]= 5.6126200652907183 check gamma integral 4.7719377551329586E-002 Warning: maximum velocity exceeds speed of light 1 0.4097761027E+11 0.1366865949E+01 Warning: maximum velocity exceeds speed of light 1 0.4097068946E+11 0.1366635096E+01 Warning: maximum velocity exceeds speed of light 1 0.4096377105E+11 0.1366404323E+01 Warning: maximum velocity exceeds speed of light 1 0.4095684847E+11 0.1366173410E+01 Warning: maximum velocity exceeds speed of light 1 0.4094991507E+11 0.1365942137E+01 Warning: maximum velocity exceeds speed of light 1 0.4094157273E+11 0.1365663866E+01 Warning: maximum velocity exceeds speed of light 1 0.4093153010E+11 0.1365328880E+01 Warning: maximum velocity exceeds speed of light 1 0.4092309891E+11 0.1365047646E+01 Warning: maximum velocity exceeds speed of light 1 0.4091533713E+11 0.1364788741E+01 Warning: maximum velocity exceeds speed of light 1 0.4090785340E+11 0.1364539111E+01 3940 8.834200 5795.659 -15.552379 2.683381 51.730810 0.000000 0.000000 0.000000 0.217139 -3.130991 3526 27 -6.8284E+00 8.834200 3.205388 -20.645454 6.585446 -99.000000 51.730810 0.000000 0.059829 0.782861 0.631407 5 2.8747E+05 4.179310 6.417882 2.683381 -19.245738 -13.990825 49.062920 0.000002 0.000000 0.371884 0.212E+04 lgRho_cntr log_rel_run_E_err -5.8381629171488765 rel_E_err 4.0088917726963457D-12 png/grid_003940.png/png k, q, energy_removed_layers before adjustment is 931 0.97823225888212528 9.5335981606241525E+049 k, q, energy_removed_layers after adjustment is 933 0.97790656330742975 9.5345460276368318E+049 Layers above q= 0.97790656330742975 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13183.031250000000 max vel inside fraction of cutoff 1761.2471979676939 max c/cs inside fraction of cutoff 2.4457723998769350 average v/vesc outside cutoff 2.5101248061253010 Kinetic plus potential energy outside cutoff 9.5345460276368318E+049 mass inside cutoff 933 50.587898390501358 relax counter 0 log max v [km/s]= 5.6118066909263344 check gamma integral 4.7176971668438879E-002 Warning: maximum velocity exceeds speed of light 1 0.4090046457E+11 0.1364292646E+01 Warning: maximum velocity exceeds speed of light 1 0.4089157423E+11 0.1363996096E+01 Warning: maximum velocity exceeds speed of light 1 0.4088087163E+11 0.1363639095E+01 Warning: maximum velocity exceeds speed of light 1 0.4087180547E+11 0.1363336681E+01 Warning: maximum velocity exceeds speed of light 1 0.4086336079E+11 0.1363054997E+01 Warning: maximum velocity exceeds speed of light 1 0.4085511337E+11 0.1362779893E+01 Warning: maximum velocity exceeds speed of light 1 0.4084518775E+11 0.1362448810E+01 Warning: maximum velocity exceeds speed of light 1 0.4083323583E+11 0.1362050136E+01 Warning: maximum velocity exceeds speed of light 1 0.4082291465E+11 0.1361705859E+01 Warning: maximum velocity exceeds speed of light 1 0.4081309161E+11 0.1361378198E+01 3950 8.854354 5722.479 -15.410885 2.739537 51.730810 0.000000 0.000000 0.000000 0.217139 -3.079158 3550 27 -6.7224E+00 8.854354 3.214574 -18.621213 6.934295 -99.000000 51.730810 0.000000 0.059829 0.782861 0.629449 5 2.8747E+05 4.235725 6.414178 2.739537 -17.290554 -14.009199 49.062920 0.000002 0.000000 0.371884 0.213E+04 lgRho_cntr log_rel_run_E_err -5.8381441535853256 rel_E_err 5.6239815549363547D-12 save photos/x950 for model 3950 png/grid_003950.png/png k, q, energy_removed_layers before adjustment is 932 0.97823225888212528 9.5351447755260666E+049 k, q, energy_removed_layers after adjustment is 934 0.97790656330742975 9.5360608015242051E+049 Layers above q= 0.97790656330742975 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13241.437500000000 max vel inside fraction of cutoff 1758.7727541509330 max c/cs inside fraction of cutoff 2.4717200724547581 average v/vesc outside cutoff 2.5302281699761826 Kinetic plus potential energy outside cutoff 9.5360608015242051E+049 mass inside cutoff 934 50.587898390501358 relax counter 0 log max v [km/s]= 5.6107994940196750 check gamma integral 4.6598395894944231E-002 Warning: maximum velocity exceeds speed of light 1 0.4080126492E+11 0.1360983701E+01 Warning: maximum velocity exceeds speed of light 1 0.4078701693E+11 0.1360508440E+01 Warning: maximum velocity exceeds speed of light 1 0.4077431426E+11 0.1360084724E+01 Warning: maximum velocity exceeds speed of light 1 0.4075900814E+11 0.1359574167E+01 Warning: maximum velocity exceeds speed of light 1 0.4074055087E+11 0.1358958499E+01 Warning: maximum velocity exceeds speed of light 1 0.4072298209E+11 0.1358372467E+01 Warning: maximum velocity exceeds speed of light 1 0.4070178555E+11 0.1357665427E+01 Warning: maximum velocity exceeds speed of light 1 0.4067618762E+11 0.1356811572E+01 Warning: maximum velocity exceeds speed of light 1 0.4065339629E+11 0.1356051335E+01 Warning: maximum velocity exceeds speed of light 1 0.4062586830E+11 0.1355133100E+01 3960 8.865366 5590.727 -15.334151 2.772397 51.730810 0.000000 0.000000 0.000000 0.217139 -3.050891 3597 27 -6.2957E+00 8.865366 3.231441 -16.641328 7.127545 -99.000000 51.730810 0.000000 0.059829 0.782861 0.628401 5 2.8747E+05 4.266589 6.407449 2.772397 -16.257494 -14.042939 49.062920 0.000002 0.000000 0.371884 0.213E+04 max increase log_rel_run_E_err -5.8380948364896907 rel_E_err 4.2533405010035680D-12 png/grid_003960.png/png k, q, energy_removed_layers before adjustment is 932 0.97823225888212517 9.5377584461191689E+049 k, q, energy_removed_layers after adjustment is 934 0.97790656330742964 9.5386258371384116E+049 Layers above q= 0.97790656330742964 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13352.357421875000 max vel inside fraction of cutoff 1744.0223907193601 max c/cs inside fraction of cutoff 2.5263885295022681 average v/vesc outside cutoff 2.5678607937631925 Kinetic plus potential energy outside cutoff 9.5386258371384116E+049 mass inside cutoff 934 50.587898390501351 relax counter 0 log max v [km/s]= 5.6088026562646451 check gamma integral 4.6248286300073799E-002 Warning: maximum velocity exceeds speed of light 1 0.4059258295E+11 0.1354022820E+01 Warning: maximum velocity exceeds speed of light 1 0.4056500635E+11 0.1353102964E+01 Warning: maximum velocity exceeds speed of light 1 0.4054118575E+11 0.1352308394E+01 Warning: maximum velocity exceeds speed of light 1 0.4052103327E+11 0.1351636180E+01 Warning: maximum velocity exceeds speed of light 1 0.4050375522E+11 0.1351059846E+01 Warning: maximum velocity exceeds speed of light 1 0.4048847551E+11 0.1350550170E+01 Warning: maximum velocity exceeds speed of light 1 0.4047455809E+11 0.1350085935E+01 Warning: maximum velocity exceeds speed of light 1 0.4046158238E+11 0.1349653112E+01 Warning: maximum velocity exceeds speed of light 1 0.4044927376E+11 0.1349242540E+01 Warning: maximum velocity exceeds speed of light 1 0.4043744978E+11 0.1348848135E+01 3970 8.842357 5472.402 -15.494687 2.705026 51.730810 0.000000 0.000000 0.000000 0.217139 -3.110587 3622 27 -6.6803E+00 8.842357 3.247021 -17.496253 6.726638 -99.000000 51.730810 0.000000 0.059829 0.782861 0.630487 5 2.8747E+05 4.201879 6.401448 2.705026 -18.442685 -14.074104 49.062920 0.000002 0.000000 0.371884 0.214E+04 lgRho_cntr log_rel_run_E_err -5.8379775049748348 rel_E_err 3.6650041534919335D-12 png/grid_003970.png/png k, q, energy_removed_layers before adjustment is 1012 0.96910802534991947 9.2084790118164801E+049 k, q, energy_removed_layers after adjustment is 1063 0.95035581314850337 1.0183101915243705E+050 Layers above q= 0.95035581314850337 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13459.205078125000 max vel inside fraction of cutoff 1373.4692202106348 max c/cs inside fraction of cutoff 1.0707540348783531 average v/vesc outside cutoff 1.5806177693721879 Kinetic plus potential energy outside cutoff 1.0183101915243705E+050 mass inside cutoff 1063 49.162675775256773 relax counter 0 log max v [km/s]= 5.6067837586521927 check gamma integral 4.6882502953550120E-002 Warning: maximum velocity exceeds speed of light 1 0.4042598539E+11 0.1348465724E+01 Warning: maximum velocity exceeds speed of light 1 0.4041479159E+11 0.1348092339E+01 Warning: maximum velocity exceeds speed of light 1 0.4040380245E+11 0.1347725781E+01 Warning: maximum velocity exceeds speed of light 1 0.4039296709E+11 0.1347364352E+01 Warning: maximum velocity exceeds speed of light 1 0.4038224473E+11 0.1347006693E+01 Warning: maximum velocity exceeds speed of light 1 0.4037160147E+11 0.1346651672E+01 Warning: maximum velocity exceeds speed of light 1 0.4036100822E+11 0.1346298319E+01 Warning: maximum velocity exceeds speed of light 1 0.4035043930E+11 0.1345945778E+01 Warning: maximum velocity exceeds speed of light 1 0.4033987143E+11 0.1345593271E+01 Warning: maximum velocity exceeds speed of light 1 0.4032716048E+11 0.1345169280E+01 3980 8.823798 5408.473 -15.625787 2.655353 51.730810 0.000000 0.000000 0.000000 0.217139 -3.158816 3611 27 -6.6579E+00 8.823798 3.255606 -18.746268 6.412087 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632225 5 2.8747E+05 4.149790 6.398203 2.655353 -20.287161 -14.091275 49.071144 0.000002 0.000000 0.371884 0.214E+04 max increase log_rel_run_E_err -5.8379666774021395 rel_E_err 3.5806858272526367D-12 png/grid_003980.png/png k, q, energy_removed_layers before adjustment is 1011 0.96910802534991947 9.2936408477197492E+049 k, q, energy_removed_layers after adjustment is 1062 0.95035581314850337 1.0233481055927541E+050 Layers above q= 0.95035581314850337 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13519.957031250000 max vel inside fraction of cutoff 1362.3877505018727 max c/cs inside fraction of cutoff 1.1741124699330767 average v/vesc outside cutoff 1.5947610448480658 Kinetic plus potential energy outside cutoff 1.0233481055927541E+050 mass inside cutoff 1062 49.162675775256773 relax counter 0 log max v [km/s]= 5.6055976434696504 check gamma integral 4.7400608020613397E-002 Warning: maximum velocity exceeds speed of light 1 0.4031186485E+11 0.1344659073E+01 Warning: maximum velocity exceeds speed of light 1 0.4029901153E+11 0.1344230332E+01 Warning: maximum velocity exceeds speed of light 1 0.4028715454E+11 0.1343834825E+01 Warning: maximum velocity exceeds speed of light 1 0.4027568699E+11 0.1343452309E+01 Warning: maximum velocity exceeds speed of light 1 0.4026432410E+11 0.1343073284E+01 Warning: maximum velocity exceeds speed of light 1 0.4025065618E+11 0.1342617371E+01 Warning: maximum velocity exceeds speed of light 1 0.4023420826E+11 0.1342068728E+01 Warning: maximum velocity exceeds speed of light 1 0.4022015734E+11 0.1341600039E+01 Warning: maximum velocity exceeds speed of light 1 0.4020698085E+11 0.1341160519E+01 Warning: maximum velocity exceeds speed of light 1 0.4019403507E+11 0.1340728694E+01 3990 8.803617 5335.832 -15.769974 2.601366 51.730810 0.000000 0.000000 0.000000 0.217139 -3.211411 3596 27 -6.6601E+00 8.803617 3.265496 -20.451149 6.091156 -99.000000 51.730810 0.000000 0.059829 0.782861 0.634156 5 2.8747E+05 4.093222 6.394495 2.601366 -22.379530 -14.111060 49.071144 0.000002 0.000000 0.371884 0.214E+04 lgRho_cntr log_rel_run_E_err -5.8379544866624684 rel_E_err 4.6989413492529365D-12 png/grid_003990.png/png k, q, energy_removed_layers before adjustment is 1014 0.96851495672906851 9.4252448216264897E+049 k, q, energy_removed_layers after adjustment is 1067 0.95035581314850326 1.0286902332988180E+050 Layers above q= 0.95035581314850326 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13591.671875000000 max vel inside fraction of cutoff 1262.4969490078940 max c/cs inside fraction of cutoff 1.1986449461152218 average v/vesc outside cutoff 1.6110467231935963 Kinetic plus potential energy outside cutoff 1.0286902332988180E+050 mass inside cutoff 1067 49.162675775256766 relax counter 0 log max v [km/s]= 5.6041616070888249 check gamma integral 4.7965156729221692E-002 Warning: maximum velocity exceeds speed of light 1 0.4017846009E+11 0.1340209169E+01 Warning: maximum velocity exceeds speed of light 1 0.4015971289E+11 0.1339583829E+01 Warning: maximum velocity exceeds speed of light 1 0.4014337823E+11 0.1339038964E+01 Warning: maximum velocity exceeds speed of light 1 0.4012774157E+11 0.1338517381E+01 Warning: maximum velocity exceeds speed of light 1 0.4010892201E+11 0.1337889628E+01 Warning: maximum velocity exceeds speed of light 1 0.4008625921E+11 0.1337133678E+01 Warning: maximum velocity exceeds speed of light 1 0.4006601778E+11 0.1336458497E+01 Warning: maximum velocity exceeds speed of light 1 0.4004163934E+11 0.1335645320E+01 Warning: maximum velocity exceeds speed of light 1 0.4001225888E+11 0.1334665293E+01 Warning: maximum velocity exceeds speed of light 1 0.3998502696E+11 0.1333756934E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 8.784423 5230.727 -15.908742 2.550041 51.730810 0.000000 0.000000 0.000000 0.217139 -3.261551 3594 27 -6.3511E+00 8.784423 3.280106 -22.679207 5.816990 -99.000000 51.730810 0.000000 0.059829 0.782861 0.636038 5 2.8747E+05 4.039498 6.389155 2.550041 -24.457437 -14.140284 49.071144 0.000002 0.000000 0.371884 0.214E+04 lgRho_cntr log_rel_run_E_err -5.8379301274352038 rel_E_err 1.3427761723089780D-11 save LOGS/profile26.data for model 4000 save photos/4000 for model 4000 png/grid_004000.png/png k, q, energy_removed_layers before adjustment is 1017 0.96808869516379792 9.5858533991553298E+049 k, q, energy_removed_layers after adjustment is 1071 0.95077512455788149 1.0359420211470712E+050 Layers above q= 0.95077512455788149 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13701.115234375000 max vel inside fraction of cutoff 1278.6977585206353 max c/cs inside fraction of cutoff 1.2434752050235887 average v/vesc outside cutoff 1.6445287537297049 Kinetic plus potential energy outside cutoff 1.0359420211470712E+050 mass inside cutoff 1071 49.184367094005935 relax counter 0 log max v [km/s]= 5.6018973931576941 check gamma integral 4.8513268584339804E-002 Warning: maximum velocity exceeds speed of light 1 0.3995219782E+11 0.1332661872E+01 Warning: maximum velocity exceeds speed of light 1 0.3991258987E+11 0.1331340693E+01 Warning: maximum velocity exceeds speed of light 1 0.3986475950E+11 0.1329745243E+01 Warning: maximum velocity exceeds speed of light 1 0.3980693789E+11 0.1327816522E+01 Warning: maximum velocity exceeds speed of light 1 0.3973694737E+11 0.1325481889E+01 Warning: maximum velocity exceeds speed of light 1 0.3967742249E+11 0.1323496353E+01 Warning: maximum velocity exceeds speed of light 1 0.3962553330E+11 0.1321765516E+01 Warning: maximum velocity exceeds speed of light 1 0.3958253315E+11 0.1320331185E+01 Warning: maximum velocity exceeds speed of light 1 0.3954693185E+11 0.1319143654E+01 Warning: maximum velocity exceeds speed of light 1 0.3951640016E+11 0.1318125226E+01 4010 8.797499 5026.594 -15.814308 2.584896 51.730810 0.000000 0.000000 0.000000 0.217139 -3.227788 3602 27 -6.3266E+00 8.797499 3.309546 -23.179231 5.999741 -99.000000 51.730810 0.000000 0.059829 0.782861 0.634667 5 2.8747E+05 4.075915 6.378880 2.584896 -23.032972 -14.199171 49.071144 0.000002 0.000000 0.371884 0.214E+04 lgRho_cntr log_rel_run_E_err -5.8378504052616744 rel_E_err 4.0332823157925953D-12 png/grid_004010.png/png k, q, energy_removed_layers before adjustment is 1018 0.96694500021820284 9.8854628778864504E+049 k, q, energy_removed_layers after adjustment is 1065 0.95251787655128317 1.0490205221011549E+050 Layers above q= 0.95251787655128317 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13935.203125000000 max vel inside fraction of cutoff 1282.4994835616778 max c/cs inside fraction of cutoff 1.3369714128301657 average v/vesc outside cutoff 1.7360309201894637 Kinetic plus potential energy outside cutoff 1.0490205221011549E+050 mass inside cutoff 1065 49.274521065837220 relax counter 0 log max v [km/s]= 5.5967773745893696 check gamma integral 4.8210775177276073E-002 Warning: maximum velocity exceeds speed of light 1 0.3948922233E+11 0.1317218672E+01 Warning: maximum velocity exceeds speed of light 1 0.3946428980E+11 0.1316387012E+01 Warning: maximum velocity exceeds speed of light 1 0.3944089832E+11 0.1315606756E+01 Warning: maximum velocity exceeds speed of light 1 0.3941859068E+11 0.1314862653E+01 Warning: maximum velocity exceeds speed of light 1 0.3939705812E+11 0.1314144404E+01 Warning: maximum velocity exceeds speed of light 1 0.3937608140E+11 0.1313444696E+01 Warning: maximum velocity exceeds speed of light 1 0.3935549584E+11 0.1312758036E+01 Warning: maximum velocity exceeds speed of light 1 0.3933517009E+11 0.1312080042E+01 Warning: maximum velocity exceeds speed of light 1 0.3931499290E+11 0.1311407003E+01 Warning: maximum velocity exceeds speed of light 1 0.3929486437E+11 0.1310735588E+01 4020 8.816789 4941.439 -15.676014 2.636359 51.730810 0.000000 0.000000 0.000000 0.217139 -3.177916 3619 27 -6.5177E+00 8.816789 3.322206 -21.652919 6.297447 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632714 5 2.8747E+05 4.129769 6.374519 2.636359 -21.003917 -14.224495 49.071144 0.000002 0.000000 0.371884 0.214E+04 lgRho_cntr log_rel_run_E_err -5.8378403237443282 rel_E_err 3.3407770433566033D-12 png/grid_004020.png/png k, q, energy_removed_layers before adjustment is 1018 0.96659378668658702 1.0004208015822727E+050 k, q, energy_removed_layers after adjustment is 1062 0.95291839063453454 1.0541291623438836E+050 Layers above q= 0.95291839063453454 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14041.748046875000 max vel inside fraction of cutoff 1275.1660555484173 max c/cs inside fraction of cutoff 1.3672760230671637 average v/vesc outside cutoff 1.7685504083022323 Kinetic plus potential energy outside cutoff 1.0541291623438836E+050 mass inside cutoff 1062 49.295239983684503 relax counter 0 log max v [km/s]= 5.5943357940982370 check gamma integral 4.7687956874229880E-002 Warning: maximum velocity exceeds speed of light 1 0.3927065215E+11 0.1309927955E+01 Warning: maximum velocity exceeds speed of light 1 0.3924151459E+11 0.1308956031E+01 Warning: maximum velocity exceeds speed of light 1 0.3921673966E+11 0.1308129628E+01 Warning: maximum velocity exceeds speed of light 1 0.3919351095E+11 0.1307354802E+01 Warning: maximum velocity exceeds speed of light 1 0.3917059383E+11 0.1306590369E+01 Warning: maximum velocity exceeds speed of light 1 0.3914302238E+11 0.1305670684E+01 Warning: maximum velocity exceeds speed of light 1 0.3910983544E+11 0.1304563687E+01 Warning: maximum velocity exceeds speed of light 1 0.3907965935E+11 0.1303557121E+01 Warning: maximum velocity exceeds speed of light 1 0.3904333031E+11 0.1302345315E+01 Warning: maximum velocity exceeds speed of light 1 0.3899956793E+11 0.1300885559E+01 4030 8.835710 4837.391 -15.541790 2.686890 51.730810 0.000000 0.000000 0.000000 0.217139 -3.129116 3640 27 -6.1923E+00 8.835710 3.338016 -19.574129 6.612986 -99.000000 51.730810 0.000000 0.059829 0.782861 0.630842 5 2.8747E+05 4.182671 6.369171 2.686890 -19.094739 -14.256120 49.071144 0.000002 0.000000 0.371884 0.214E+04 max increase log_rel_run_E_err -5.8378258179225950 rel_E_err 9.6805221607969398D-12 png/grid_004030.png/png k, q, energy_removed_layers before adjustment is 1019 0.96606334195814247 1.0117862362650031E+050 k, q, energy_removed_layers after adjustment is 1061 0.95352716536700199 1.0599637647078347E+050 Layers above q= 0.95352716536700199 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14180.160156250000 max vel inside fraction of cutoff 1264.5231220372691 max c/cs inside fraction of cutoff 1.4920163165384008 average v/vesc outside cutoff 1.8132142771026787 Kinetic plus potential energy outside cutoff 1.0599637647078347E+050 mass inside cutoff 1061 49.326732393557087 relax counter 0 log max v [km/s]= 5.5910597956208106 check gamma integral 4.7150411917881427E-002 Warning: maximum velocity exceeds speed of light 1 0.3894681536E+11 0.1299125923E+01 Warning: maximum velocity exceeds speed of light 1 0.3888317509E+11 0.1297003112E+01 Warning: maximum velocity exceeds speed of light 1 0.3880632955E+11 0.1294439821E+01 Warning: maximum velocity exceeds speed of light 1 0.3871344372E+11 0.1291341483E+01 Warning: maximum velocity exceeds speed of light 1 0.3860104965E+11 0.1287592420E+01 Warning: maximum velocity exceeds speed of light 1 0.3851056525E+11 0.1284574185E+01 Warning: maximum velocity exceeds speed of light 1 0.3843782429E+11 0.1282147808E+01 Warning: maximum velocity exceeds speed of light 1 0.3837941087E+11 0.1280199346E+01 Warning: maximum velocity exceeds speed of light 1 0.3833254107E+11 0.1278635938E+01 Warning: maximum velocity exceeds speed of light 1 0.3829100552E+11 0.1277250461E+01 4040 8.812604 4623.580 -15.705789 2.625017 51.730810 0.000000 0.000000 0.000000 0.217139 -3.189502 3717 27 -6.2376E+00 8.812604 3.371892 -20.651489 6.231352 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632972 5 2.8747E+05 4.117746 6.358391 2.625017 -21.435926 -14.323878 49.071144 0.000002 0.000000 0.371884 0.213E+04 lgRho_cntr log_rel_run_E_err -5.8377765720979786 rel_E_err 4.1132537742148532D-12 png/grid_004040.png/png k, q, energy_removed_layers before adjustment is 1029 0.96541689957515520 1.0325485676690044E+050 k, q, energy_removed_layers after adjustment is 1070 0.95413844748350862 1.0706289449732845E+050 Layers above q= 0.95413844748350862 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14498.501953125000 max vel inside fraction of cutoff 1199.1133666665451 max c/cs inside fraction of cutoff 1.5029456991491650 average v/vesc outside cutoff 1.8940475663195788 Kinetic plus potential energy outside cutoff 1.0706289449732845E+050 mass inside cutoff 1070 49.358354512436399 relax counter 0 log max v [km/s]= 5.5830967710021620 check gamma integral 4.7787139403964819E-002 Warning: maximum velocity exceeds speed of light 1 0.3825106099E+11 0.1275918055E+01 Warning: maximum velocity exceeds speed of light 1 0.3820298993E+11 0.1274314577E+01 Warning: maximum velocity exceeds speed of light 1 0.3814511007E+11 0.1272383913E+01 Warning: maximum velocity exceeds speed of light 1 0.3809159856E+11 0.1270598961E+01 Warning: maximum velocity exceeds speed of light 1 0.3802715455E+11 0.1268449340E+01 Warning: maximum velocity exceeds speed of light 1 0.3794949855E+11 0.1265859015E+01 Warning: maximum velocity exceeds speed of light 1 0.3785585784E+11 0.1262735497E+01 Warning: maximum velocity exceeds speed of light 1 0.3774286168E+11 0.1258966351E+01 Warning: maximum velocity exceeds speed of light 1 0.3760640489E+11 0.1254414642E+01 Warning: maximum velocity exceeds speed of light 1 0.3744148903E+11 0.1248913641E+01 4050 8.809098 4416.102 -15.730985 2.615657 51.730810 0.000000 0.000000 0.000000 0.217139 -3.198797 3729 27 -5.6576E+00 8.809098 3.406942 -21.748834 6.176091 -99.000000 51.730810 0.000000 0.059829 0.782861 0.633277 5 2.8747E+05 4.107854 6.348734 2.615657 -21.801931 -14.393983 49.071144 0.000002 0.000000 0.371884 0.210E+04 min_dr_div_cs log_rel_run_E_err -5.8375519085238077 rel_E_err 2.9571851427193237D-10 save photos/x050 for model 4050 png/grid_004050.png/png k, q, energy_removed_layers before adjustment is 1026 0.96508877513803881 1.0484025830915153E+050 k, q, energy_removed_layers after adjustment is 1148 0.93711265431733815 1.1483852865476654E+050 Layers above q= 0.93711265431733815 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14862.546875000000 max vel inside fraction of cutoff 838.99178213374341 max c/cs inside fraction of cutoff 0.81526994273638120 average v/vesc outside cutoff 1.6118245040337478 Kinetic plus potential energy outside cutoff 1.1483852865476654E+050 mass inside cutoff 1148 48.477596445126906 relax counter 0 log max v [km/s]= 5.5733531121149262 check gamma integral 4.7925891302519660E-002 Warning: maximum velocity exceeds speed of light 1 0.3730884336E+11 0.1244489058E+01 Warning: maximum velocity exceeds speed of light 1 0.3720228740E+11 0.1240934734E+01 Warning: maximum velocity exceeds speed of light 1 0.3710886517E+11 0.1237818503E+01 Warning: maximum velocity exceeds speed of light 1 0.3701793940E+11 0.1234785546E+01 Warning: maximum velocity exceeds speed of light 1 0.3692634532E+11 0.1231730297E+01 Warning: maximum velocity exceeds speed of light 1 0.3681602181E+11 0.1228050300E+01 Warning: maximum velocity exceeds speed of light 1 0.3668305321E+11 0.1223614945E+01 Warning: maximum velocity exceeds speed of light 1 0.3656132251E+11 0.1219554446E+01 Warning: maximum velocity exceeds speed of light 1 0.3644321091E+11 0.1215614667E+01 Warning: maximum velocity exceeds speed of light 1 0.3630088281E+11 0.1210867113E+01 4060 8.816515 4193.038 -15.677951 2.635552 51.730810 0.000000 0.000000 0.000000 0.217139 -3.179691 3746 27 -5.7386E+00 8.816515 3.447273 -20.857244 6.294021 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632519 5 2.8747E+05 4.128546 6.339354 2.635552 -21.031190 -14.474649 49.071144 0.000002 0.000000 0.371884 0.206E+04 max increase log_rel_run_E_err -5.8374784157253217 rel_E_err 4.5976682128437280D-11 png/grid_004060.png/png k, q, energy_removed_layers before adjustment is 1023 0.96445785059934586 1.0647164942331398E+050 k, q, energy_removed_layers after adjustment is 1137 0.93941623669592345 1.1627831845242424E+050 Layers above q= 0.93941623669592345 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -15331.896484375000 max vel inside fraction of cutoff 768.83802059889456 max c/cs inside fraction of cutoff 0.84130757124936328 average v/vesc outside cutoff 1.7328267146887735 Kinetic plus potential energy outside cutoff 1.1627831845242424E+050 mass inside cutoff 1137 48.596762626922320 relax counter 0 log max v [km/s]= 5.5599171868527435 check gamma integral 4.7732044928735083E-002 Warning: maximum velocity exceeds speed of light 1 0.3612928096E+11 0.1205143091E+01 Warning: maximum velocity exceeds speed of light 2 0.3592344585E+11 0.1198277171E+01 Warning: maximum velocity exceeds speed of light 2 0.3575426199E+11 0.1192633805E+01 Warning: maximum velocity exceeds speed of light 2 0.3559531582E+11 0.1187331931E+01 Warning: maximum velocity exceeds speed of light 2 0.3543881068E+11 0.1182111482E+01 Warning: maximum velocity exceeds speed of light 2 0.3524999558E+11 0.1175813288E+01 Warning: maximum velocity exceeds speed of light 3 0.3502606676E+11 0.1168343827E+01 Warning: maximum velocity exceeds speed of light 3 0.3483957009E+11 0.1162122967E+01 Warning: maximum velocity exceeds speed of light 3 0.3461392011E+11 0.1154596094E+01 Warning: maximum velocity exceeds speed of light 3 0.3434056500E+11 0.1145477949E+01 4070 8.814434 3883.096 -15.692820 2.630194 51.730810 0.000000 0.000000 0.000000 0.217139 -3.185140 3744 27 -5.4146E+00 8.814434 3.508113 -21.203916 6.260593 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632713 5 2.8747E+05 4.122701 6.327633 2.630194 -21.246136 -14.596330 49.071144 0.000002 0.000000 0.371884 0.197E+04 min_dr_div_cs log_rel_run_E_err -5.8372917742024057 rel_E_err 1.1506809244680845D-10 png/grid_004070.png/png k, q, energy_removed_layers before adjustment is 1051 0.95625744367181353 1.1286737999378479E+050 k, q, energy_removed_layers after adjustment is 1183 0.93237258147257973 1.1948652286180473E+050 Layers above q= 0.93237258147257973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -16165.720703125000 max vel inside fraction of cutoff 409.56178427825824 max c/cs inside fraction of cutoff 0.42037094660835123 average v/vesc outside cutoff 1.7161403862218176 Kinetic plus potential energy outside cutoff 1.1948652286180473E+050 mass inside cutoff 1183 48.232388638541373 relax counter 0 log max v [km/s]= 5.5358074362309058 check gamma integral 4.7824850153595180E-002 Warning: maximum velocity exceeds speed of light 4 0.3411868742E+11 0.1138076910E+01 Warning: maximum velocity exceeds speed of light 4 0.3391591874E+11 0.1131313275E+01 Warning: maximum velocity exceeds speed of light 4 0.3371576792E+11 0.1124636962E+01 Warning: maximum velocity exceeds speed of light 4 0.3351748255E+11 0.1118022874E+01 Warning: maximum velocity exceeds speed of light 5 0.3329204169E+11 0.1110502976E+01 Warning: maximum velocity exceeds speed of light 5 0.3302670168E+11 0.1101652186E+01 Warning: maximum velocity exceeds speed of light 5 0.3278431523E+11 0.1093567045E+01 Warning: maximum velocity exceeds speed of light 6 0.3255679985E+11 0.1085977948E+01 Warning: maximum velocity exceeds speed of light 6 0.3229466200E+11 0.1077233971E+01 Warning: maximum velocity exceeds speed of light 6 0.3197398439E+11 0.1066537317E+01 4080 8.813591 3560.698 -15.698844 2.628261 51.730810 0.000000 0.000000 0.000000 0.217139 -3.187328 3743 27 -5.2672E+00 8.813591 3.577335 -21.326577 6.247128 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632795 5 2.8747E+05 4.120342 6.315505 2.628261 -21.333492 -14.734759 49.071144 0.000002 0.000000 0.371884 0.181E+04 min_dr_div_cs log_rel_run_E_err -5.8371825280719980 rel_E_err 9.6488027467582310D-11 png/grid_004080.png/png k, q, energy_removed_layers before adjustment is 1054 0.95508133935382611 1.1632810590569308E+050 k, q, energy_removed_layers after adjustment is 1150 0.93689599712559812 1.2127617830902572E+050 Layers above q= 0.93689599712559812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -17359.371093750000 max vel inside fraction of cutoff 430.75496907745463 max c/cs inside fraction of cutoff 0.54172426947095509 average v/vesc outside cutoff 1.9707066967598192 Kinetic plus potential energy outside cutoff 1.2127617830902572E+050 mass inside cutoff 1150 48.466388593157646 relax counter 0 log max v [km/s]= 5.5047967586016844 check gamma integral 4.7879491655090409E-002 Warning: maximum velocity exceeds speed of light 7 0.3171046747E+11 0.1057747339E+01 Warning: maximum velocity exceeds speed of light 7 0.3145983596E+11 0.1049387172E+01 Warning: maximum velocity exceeds speed of light 7 0.3121220939E+11 0.1041127238E+01 Warning: maximum velocity exceeds speed of light 8 0.3093783452E+11 0.1031975078E+01 Warning: maximum velocity exceeds speed of light 8 0.3060067267E+11 0.1020728569E+01 Warning: maximum velocity exceeds speed of light 9 0.3032534063E+11 0.1011544481E+01 Warning: maximum velocity exceeds speed of light 9 0.3006664338E+11 0.1002915269E+01 4090 8.813380 3239.006 -15.700356 2.628186 51.730810 0.000000 0.000000 0.000000 0.217139 -3.187877 3748 27 -5.0573E+00 8.813380 3.655154 -21.391816 6.243756 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632816 5 2.8747E+05 4.119751 6.306648 2.628186 -21.355411 -14.890338 49.071144 0.000002 0.000000 0.371884 0.153E+04 min_dr_div_cs log_rel_run_E_err -5.8370964546393145 rel_E_err 4.1784597207605016D-11 png/grid_004090.png/png k, q, energy_removed_layers before adjustment is 1058 0.95352716536700177 1.1898156364269758E+050 k, q, energy_removed_layers after adjustment is 1135 0.93883944586349699 1.2290626373068644E+050 Layers above q= 0.93883944586349699 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -19185.400390625000 max vel inside fraction of cutoff 395.34618559508101 max c/cs inside fraction of cutoff 0.56386623480704889 average v/vesc outside cutoff 2.2417359368838921 Kinetic plus potential energy outside cutoff 1.2290626373068644E+050 mass inside cutoff 1135 48.566924770098169 relax counter 0 log max v [km/s]= 5.4616236779343348 check gamma integral 4.7914625215560037E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 8.813198 2999.766 -15.701658 2.628649 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188349 3785 27 -4.8608E+00 8.813198 3.746835 -21.454823 6.240853 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632833 5 2.8747E+05 4.119242 6.356714 2.628649 -21.374294 -15.073396 49.071144 0.000002 0.000000 0.371884 0.936E+03 max increase log_rel_run_E_err -5.8370370733248631 rel_E_err 9.3952441405668604D-12 save LOGS/profile27.data for model 4100 save photos/x100 for model 4100 png/grid_004100.png/png k, q, energy_removed_layers before adjustment is 1074 0.94909815496528804 1.2279981657598072E+050 k, q, energy_removed_layers after adjustment is 1135 0.93883944586349699 1.2448175738593356E+050 Layers above q= 0.93883944586349699 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -22746.664062500000 max vel inside fraction of cutoff 307.74045602273742 max c/cs inside fraction of cutoff 0.50380887023765109 average v/vesc outside cutoff 2.6140074093393042 Kinetic plus potential energy outside cutoff 1.2448175738593356E+050 mass inside cutoff 1135 48.566924770098169 relax counter 0 log max v [km/s]= 5.3782200822929447 check gamma integral 4.7951206930096892E-002 4110 8.813076 3031.853 -15.702533 2.629799 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188666 3844 27 -4.6808E+00 8.813076 3.818262 -21.497305 6.238906 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632845 5 2.8747E+05 4.118900 6.518050 2.629799 -21.386980 -15.215115 49.071144 0.000002 0.000000 0.371884 0.496E+03 min_dr_div_cs log_rel_run_E_err -5.8370183643194036 rel_E_err 4.0601311345240661D-12 png/grid_004110.png/png k, q, energy_removed_layers before adjustment is 1073 0.94725307789522195 1.2453463896544175E+050 k, q, energy_removed_layers after adjustment is 1123 0.93941623669592256 1.2547682780029035E+050 Layers above q= 0.93941623669592256 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -28326.015625000000 max vel inside fraction of cutoff 234.51868481170885 max c/cs inside fraction of cutoff 0.46216628357234751 average v/vesc outside cutoff 3.1199774123436113 Kinetic plus potential energy outside cutoff 1.2547682780029035E+050 mass inside cutoff 1123 48.596762626922278 relax counter 0 log max v [km/s]= 5.2539093244694222 check gamma integral 4.7977424510457667E-002 4120 8.813009 2786.013 -15.703011 2.631776 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188839 3924 27 -4.5699E+00 8.813009 3.906976 -21.520474 6.237843 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632852 6 2.8747E+05 4.118713 6.548579 2.631776 -21.393907 -15.392382 49.071144 0.000002 0.000000 0.371884 0.643E+03 min_dr_div_cs log_rel_run_E_err -5.8370064397613479 rel_E_err 3.1893467185247967D-12 png/grid_004120.png/png k, q, energy_removed_layers before adjustment is 1087 0.94555158616867774 1.2554514047998318E+050 k, q, energy_removed_layers after adjustment is 1133 0.93979631190565160 1.2603201355122674E+050 Layers above q= 0.93979631190565160 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -36556.019531250000 max vel inside fraction of cutoff 156.19646946599391 max c/cs inside fraction of cutoff 0.34793261735166353 average v/vesc outside cutoff 3.7316668245965721 Kinetic plus potential energy outside cutoff 1.2603201355122674E+050 mass inside cutoff 1133 48.616424225291638 relax counter 0 log max v [km/s]= 5.1760369247156399 check gamma integral 4.7992582393690954E-002 4130 8.812979 2396.953 -15.703226 2.634602 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188916 3978 27 -4.3445E+00 8.812979 4.014368 -21.530925 6.237364 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632855 6 2.8747E+05 4.118629 6.502069 2.634602 -21.397028 -15.607010 49.071144 0.000002 0.000000 0.371884 0.595E+03 max increase log_rel_run_E_err -5.8369964240616028 rel_E_err 3.2148687764117729D-12 png/grid_004130.png/png k, q, energy_removed_layers before adjustment is 1083 0.94455987610630221 1.2605146462532209E+050 k, q, energy_removed_layers after adjustment is 1131 0.94029878628075925 1.2632954231398433E+050 Layers above q= 0.94029878628075925 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -47813.740234375000 max vel inside fraction of cutoff 83.846116591313631 max c/cs inside fraction of cutoff 0.21568344502358100 average v/vesc outside cutoff 4.4405036597089529 Kinetic plus potential energy outside cutoff 1.2632954231398433E+050 mass inside cutoff 1131 48.642417631600125 relax counter 0 log max v [km/s]= 5.1591170007348133 check gamma integral 4.7998170041879659E-002 4140 8.812973 2188.206 -15.703271 2.639492 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188932 4011 27 -4.0534E+00 8.812973 4.089949 -21.533130 6.237264 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632856 11 2.8747E+05 4.118612 6.494944 2.639492 -21.397680 -15.754146 49.071144 0.000002 0.000000 0.371884 0.118E+03 min_dr_div_cs log_rel_run_E_err -5.8369812335899720 rel_E_err 3.2591069927288592D-12 png/grid_004140.png/png k, q, energy_removed_layers before adjustment is 1088 0.94359615279346754 1.2638475598888802E+050 k, q, energy_removed_layers after adjustment is 1124 0.94086631256433761 1.2651943504271832E+050 Layers above q= 0.94086631256433761 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -67237.683593750000 max vel inside fraction of cutoff 6.5544656701490469 max c/cs inside fraction of cutoff 1.8748692804246410E-002 average v/vesc outside cutoff 5.4551322289220270 Kinetic plus potential energy outside cutoff 1.2651943504271832E+050 mass inside cutoff 1124 48.671776225810291 relax counter 1 log max v [km/s]= 5.1257746082744156 check gamma integral 4.8000880423838210E-002 max_residual > tol_max_residual 4142 3.9552900830630263D-03 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4142 1.3000686221557430D-02 1.0950191456306061D-03 3.6500638187686868D-01 solver rejected trial model s% model_number 4142 s% solver_call_number 2592 nz 4008 s% num_retries 27 dt 3.0406372146011695D+03 log dt/secyer -4.0161393605207136D+00 retry: max corr+resid -- give up in solver 4142 solver rejected trial model s% model_number 4144 s% solver_call_number 2595 nz 4008 s% num_retries 28 dt 2.1892587945128421D+03 log dt/secyer -4.1588068640894447D+00 retry: max correction jumped -- give up in solver 4144 residual_norm > tol_residual_norm 4147 4.0818035814721459D-01 9.9999999999999995D-07 max_residual > tol_max_residual 4147 4.0741727714177818D+04 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4147 6.0795786743645538D-02 3.0000000000000001D-03 1.0000000000000000D+00 solver rejected trial model s% model_number 4147 s% solver_call_number 2599 nz 4008 s% num_retries 29 dt 1.8915195984590953D+03 log dt/secyer -4.2222931216105515D+00 retry: max corr, avg+max resid -- give up in solver 4147 4150 8.812979 2117.406 -15.703225 2.643195 51.730810 0.000000 0.000000 0.000000 0.217139 -3.188916 4008 30 -4.2858E+00 8.812979 4.113929 -21.530931 6.237366 -99.000000 51.730810 0.000000 0.059829 0.782861 0.632855 7 2.8747E+05 4.118630 6.485767 2.643195 -21.397018 -12.341747 49.071144 0.000002 0.000000 0.371884 0.167E+05 max increase log_rel_run_E_err -5.8369715276781040 rel_E_err 3.1152361342684939D-12 save photos/x150 for model 4150 png/grid_004150.png/png k, q, energy_removed_layers before adjustment is 1086 0.94323032262794781 1.2649631870344312E+050 k, q, energy_removed_layers after adjustment is 1116 0.94100889194997794 1.2658330754539666E+050 Layers above q= 0.94100889194997794 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -82177.539062500000 max vel inside fraction of cutoff 21.810787389741702 max c/cs inside fraction of cutoff 6.2705392960479764E-002 average v/vesc outside cutoff 6.1106160180923998 Kinetic plus potential energy outside cutoff 1.2658330754539666E+050 mass inside cutoff 1116 48.679151972884689 relax counter 11 log max v [km/s]= 5.0834852303865574 check gamma integral 4.8001296831888911E-002 residual_norm > tol_residual_norm 4151 1.8422664132906346D+00 9.9999999999999995D-07 max_residual > tol_max_residual 4151 1.9621049275963538D+05 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4151 3.3367144456532459D-02 3.0000000000000001D-03 1.0000000000000000D+00 solver rejected trial model s% model_number 4151 s% solver_call_number 2604 nz 4008 s% num_retries 30 dt 1.9611275196823897D+03 log dt/secyer -4.2065981330840332D+00 retry: max corr, avg+max resid -- give up in solver 4151 retry 4151 retry 4151 residual_norm > tol_residual_norm 4151 1.2908703051653775D-03 9.9999999999999995D-07 max_residual > tol_max_residual 4151 1.2946901953820739D+02 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4151 1.1706617204290887D-01 2.5626531966043910D-03 8.5421773220146369D-01 retry: max corr, avg+max resid -- give up in solver 4151 retry 4151 retry 4151 retry 4151 retry 4151 retry 4151 retry 4151 retry 4151 after hydro, negative cell volume in cell k 6 0.0000000000000000D+00 3.4438286502314405D+01 3.4438286502314405D+01 1.4210854715202004D-14 3.4438277584264505D+01 3.4438277584264490D+01 solver rejected trial model s% model_number 4152 s% solver_call_number 2616 nz 4008 s% num_retries 41 dt 1.1490981560639002D+00 log dt/secyer -7.4387468393402019D+00 retry 4152 retry 4152 retry 4152 retry 4152 retry 4152 retry 4152 retry 4152 retry 4152 retry 4152 after hydro, negative cell volume in cell k 29 0.0000000000000000D+00 3.4438155049826186D+01 3.4438155049826186D+01 2.1316282072803006D-14 3.4438155017458655D+01 3.4438155017458634D+01 solver rejected trial model s% model_number 4154 s% solver_call_number 2627 nz 4008 s% num_retries 50 dt 3.2318385639297192D-03 log dt/secyer -9.9896543082207820D+00 retry 4154 retry 4154 max_abs_correction > tol_max_correction*coeff 4154 4.0630517581487892D-03 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 9.3132801555830622D-03 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 7.7303247119029535D-03 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.9577904905312634D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 5.1640099545211413D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.6537249079707474D-02 1.5044598997076262D-03 5.0148663323587539D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.9744794907807239D-02 1.2599751939582967D-03 4.1999173131943218D-01 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 3.8705959453967297D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.0320465678294035D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.6920790953424999D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.6788052185143486D-02 6.3980496329423756D-04 2.1326832109807917D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.8929971328490676D-02 7.1074608676401237D-04 2.3691536225467080D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.2167935621604337D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.7393297818592207D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.7508372448949037D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.8389252937024047D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.3038843779564517D-02 1.2518142188337512D-03 4.1727140627791709D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.2611277058261006D-02 1.0931887823204057D-03 3.6439626077346854D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.5494871657035654D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.1726008450434993D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.1798711279492480D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.3348227116176009D-02 1.5130800567322510D-03 5.0436001891075033D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.6139079136388384D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.3010424343313201D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.1321559696403695D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 6.3196469711106082D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.9514754067955111D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.3887391067611577D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.5140713607147523D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.0636392902301234D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 5.4923452846556302D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.5333999822553253D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.1244902724748271D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.9673666341070215D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.8571673918867731D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.1672048219104514D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 3.9416354736918624D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 3.2340371092324742D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.8097028934148473D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 4.7502236106702154D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 7.6193069654795942D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 3.7796115899417712D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.7720667126849830D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.0265160157021622D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 5.7484623285564217D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.0906565802191190D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 7.0404555822418238D-02 1.4999694838726094D-03 4.9998982795753644D-01 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 3.9947643071139688D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.3993247127648713D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.3748677109337581D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 5.1069339637689558D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.7447228829220870D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.6154226176971018D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.3829114585608435D-02 1.5000241065527961D-03 5.0000803551759865D-01 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 3.2659112255959248D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 2.4513228643681988D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.5444243696762125D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.0112567399837480D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 4.1694421830233759D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.4894659892876748D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 1.4715895892027330D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 correction_norm > tol_correction_norm*coeff 4154 4.8092199695126857D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4154 5.2406162098709144D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 2.3367809557160113D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 max_abs_correction > tol_max_correction*coeff 4154 4.0296786906498613D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4154 dt 5.6063462274160550D-21 min_timestep_limit 9.9999999999999995D-21 stopping because of problems dt < min_timestep_limit terminated evolution: cannot find acceptable model termination code: min_timestep_limit runtime (minutes), retries, steps 42.43 108 4154 DATE: 2024-12-01 TIME: 17:59:56 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************