DATE: 2026-11-20 TIME: 14:12:51 run inlist_to_he_dep_header DATE: 2026-11-20 TIME: 14:12:53 reading user weak rate file /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number c1f8e3ab9 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. create pre-main-sequence model set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 species mass 8 7.2500000000000000D+01 write /mnt/home/bbarker/ceph/mesa_testing/work/data/eosDT_data/cache/mesa-FreeEOS_02z00x.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.002_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.002_x0.0.bin relax_num_steps 300 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.001_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.002_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.001_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.002_x0.1.bin 10 5.496775 7489.969 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401564 655 0 -5.0000E+00 5.496775 3.027373 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 9.8000E-05 -6.237990 6.507360 -99.000000 -99.000000 -7.613691 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 20 5.496781 7493.367 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401544 656 0 -5.0000E+00 5.496781 3.027379 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 1.9800E-04 -6.237972 6.508160 -99.000000 -99.000000 -7.614360 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 30 5.496775 7511.251 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401561 655 0 -5.0000E+00 5.496775 3.027412 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 2.9800E-04 -6.237989 6.512366 -99.000000 -99.000000 -7.617873 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 40 5.496769 7526.973 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401523 655 0 -5.0000E+00 5.496769 3.027440 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 3.9800E-04 -6.237982 6.516055 -99.000000 -99.000000 -7.620947 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 50 5.496764 7540.411 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401475 655 0 -5.0000E+00 5.496764 3.027464 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 4.9800E-04 -6.237968 6.519202 -99.000000 -99.000000 -7.623563 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 60 5.496762 7551.199 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401432 656 0 -5.0000E+00 5.496762 3.027484 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 5.9800E-04 -6.237952 6.521724 -99.000000 -99.000000 -7.625655 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 70 5.496762 7560.400 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401395 657 0 -5.0000E+00 5.496762 3.027500 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 6.9800E-04 -6.237936 6.523873 -99.000000 -99.000000 -7.627433 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 80 5.496764 7568.169 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401362 653 0 -5.0000E+00 5.496764 3.027514 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 7.9800E-04 -6.237919 6.525685 -99.000000 -99.000000 -7.628930 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 90 5.496766 7575.175 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401332 653 0 -5.0000E+00 5.496766 3.027527 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 8.9800E-04 -6.237903 6.527318 -99.000000 -99.000000 -7.630275 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 5.496769 7581.669 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401305 655 0 -5.0000E+00 5.496769 3.027538 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 9.9800E-04 -6.237887 6.528830 -99.000000 -99.000000 -7.631519 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 110 5.496772 7587.318 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401279 655 0 -5.0000E+00 5.496772 3.027549 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 1.0980E-03 -6.237871 6.530144 -99.000000 -99.000000 -7.632599 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 120 5.496776 7592.437 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401255 656 0 -5.0000E+00 5.496776 3.027558 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 1.1980E-03 -6.237854 6.531334 -99.000000 -99.000000 -7.633575 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 130 5.496781 7597.177 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401231 656 0 -5.0000E+00 5.496781 3.027566 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.2980E-03 -6.237837 6.532435 -99.000000 -99.000000 -7.634477 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 140 5.496786 7601.843 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401208 657 0 -5.0000E+00 5.496786 3.027574 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.3980E-03 -6.237820 6.533518 -99.000000 -99.000000 -7.635363 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 150 5.496791 7605.919 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401185 657 0 -5.0000E+00 5.496791 3.027581 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.4980E-03 -6.237802 6.534463 -99.000000 -99.000000 -7.636135 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 160 5.496796 7609.654 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401162 657 0 -5.0000E+00 5.496796 3.027588 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.5980E-03 -6.237784 6.535329 -99.000000 -99.000000 -7.636841 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 170 5.496802 7613.128 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401139 657 0 -5.0000E+00 5.496802 3.027593 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.6980E-03 -6.237765 6.536133 -99.000000 -99.000000 -7.637497 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 180 5.496808 7616.371 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401116 657 0 -5.0000E+00 5.496808 3.027599 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.7980E-03 -6.237747 6.536884 -99.000000 -99.000000 -7.638108 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 190 5.496814 7619.411 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401093 657 0 -5.0000E+00 5.496814 3.027604 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.8980E-03 -6.237728 6.537586 -99.000000 -99.000000 -7.638680 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 5.496819 7622.927 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401071 657 0 -5.0000E+00 5.496819 3.027609 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.9980E-03 -6.237710 6.538399 -99.000000 -99.000000 -7.639340 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 210 5.496825 7625.815 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401049 657 0 -5.0000E+00 5.496825 3.027614 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.0980E-03 -6.237691 6.539066 -99.000000 -99.000000 -7.639881 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 220 5.496832 7628.448 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401026 657 0 -5.0000E+00 5.496832 3.027617 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.1980E-03 -6.237671 6.539673 -99.000000 -99.000000 -7.640374 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 230 5.496838 7630.946 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401003 656 0 -5.0000E+00 5.496838 3.027621 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.2980E-03 -6.237651 6.540249 -99.000000 -99.000000 -7.640841 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 240 5.496845 7633.313 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400980 656 0 -5.0000E+00 5.496845 3.027624 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.3980E-03 -6.237631 6.540794 -99.000000 -99.000000 -7.641282 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 250 5.496852 7635.683 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400957 656 0 -5.0000E+00 5.496852 3.027627 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.4980E-03 -6.237612 6.541340 -99.000000 -99.000000 -7.641724 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 260 5.496858 7637.878 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400934 656 0 -5.0000E+00 5.496858 3.027630 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.5980E-03 -6.237591 6.541844 -99.000000 -99.000000 -7.642132 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 270 5.496865 7639.954 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400910 656 0 -5.0000E+00 5.496865 3.027632 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.6980E-03 -6.237571 6.542321 -99.000000 -99.000000 -7.642517 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 280 5.496872 7642.443 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400888 658 0 -5.0000E+00 5.496872 3.027635 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.7980E-03 -6.237551 6.542893 -99.000000 -99.000000 -7.642979 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 290 5.496879 7644.514 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400865 658 0 -5.0000E+00 5.496879 3.027638 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.8980E-03 -6.237531 6.543369 -99.000000 -99.000000 -7.643363 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 5.496886 7646.386 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400842 657 0 -5.0000E+00 5.496886 3.027640 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.9980E-03 -6.237510 6.543798 -99.000000 -99.000000 -7.643708 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt finished doing relax num steps relax_to_radiative_core 10 5.497680 7715.813 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.398302 654 0 -2.2907E+00 5.497680 3.027437 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 1.0230E-02 -6.235216 6.559095 -99.000000 -99.000000 -7.655943 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase waiting for fully convective core to develop 10 1.5286543361269040D-03 20 5.566472 7929.626 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.162434 666 0 -7.1821E-01 5.566472 2.978106 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015256 3 1.0633E+00 -6.029600 6.507917 -99.000000 -99.000000 -7.627198 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 20 7.8173674478154709D-08 30 5.678336 8189.867 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -14.758876 694 0 -4.9874E-01 5.678336 2.897168 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015344 4 3.6409E+00 -5.686549 6.402138 -99.000000 -99.000000 -7.557963 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 30 7.8173674922243919D-08 40 5.787666 8455.047 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -14.370773 701 0 -2.8766E-01 5.787666 2.814648 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015398 4 7.8284E+00 -5.354018 6.292454 -99.000000 -99.000000 -7.484746 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 40 7.8173673589976289D-08 50 5.894351 8727.101 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995953 734 0 -7.6738E-02 5.894351 2.731140 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 4 1.4610E+01 -5.031217 6.180454 -99.000000 -99.000000 -7.415382 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol finished relax to begin radiative core 50 3.8943397372090938D-01 finished doing relax_to_radiative_core set_initial_number_retries 0 new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name basic.net rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849134888689905E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1 10 5.894356 8693.872 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995933 737 0 -4.2874E+00 5.894356 2.731122 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 2.5959E-04 -5.031201 6.173790 -99.000000 -99.000000 -7.410688 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5140094489613229 rel_E_err 3.0618968151621745D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849114865274555E-002 20 5.894376 8690.935 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995857 736 0 -3.4956E+00 5.894376 2.731119 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 1.8669E-03 -5.031138 6.173197 -99.000000 -99.000000 -7.410255 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5308268730802101 rel_E_err 2.9455956304478646D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849099677116747E-002 30 5.894501 8694.464 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995413 736 0 -2.7037E+00 5.894501 2.731074 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 1.1819E-02 -5.030757 6.173813 -99.000000 -99.000000 -7.410714 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5255152012583313 rel_E_err 2.9818431750551238D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849157777192616E-002 40 5.895273 8697.400 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.992693 738 0 -1.9119E+00 5.895273 2.730608 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 7.3439E-02 -5.028418 6.173467 -99.000000 -99.000000 -7.410551 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5141411110631733 rel_E_err 3.0609687014390177D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849288967081180E-002 50 5.899992 8709.384 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.976082 739 0 -1.1201E+00 5.899992 2.727087 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015432 4 4.5497E-01 -5.014126 6.168817 -99.000000 -99.000000 -7.407836 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5070213078019847 rel_E_err 3.1115636706278478D-12 save photos/x050 for model 50 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849595157194506E-002 60 5.916881 8785.118 -99.000000 -99.000000 72.499973 0.000000 0.000000 0.000074 0.998580 -13.916510 741 0 -8.4820E-01 5.916881 2.713722 -99.000000 -99.000000 -4.736374 72.499973 0.998580 0.000610 0.001420 0.015438 4 1.8706E+00 -4.962920 6.157128 -99.000000 -99.000000 -7.402490 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5339260193749897 rel_E_err 2.9246505399342608D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9850879532610993E-002 70 5.936010 8832.358 -99.000000 -99.000000 72.499943 0.000000 0.000000 0.000074 0.998580 -13.848643 740 0 -7.4234E-01 5.936010 2.699466 -99.000000 -99.000000 -4.771361 72.499943 0.998580 0.000610 0.001420 0.015448 5 3.6030E+00 -4.904751 6.137933 -99.000000 -99.000000 -7.392030 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -8.9050301797571443 rel_E_err 1.2444281316402234D-09 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9852264753108897E-002 80 5.954021 8877.098 -99.000000 -99.000000 72.499914 0.000000 0.000000 0.000074 0.998580 -13.784333 741 0 -7.8033E-01 5.954021 2.686756 -99.000000 -99.000000 -4.802890 72.499914 0.998580 0.000610 0.001420 0.015459 5 5.3600E+00 -4.849803 6.121290 -99.000000 -99.000000 -7.383470 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -10.0755152928901985 rel_E_err 8.4039741351266603D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9853299069091634E-002 90 5.972792 8922.029 -99.000000 -99.000000 72.499884 0.000000 0.000000 0.000074 0.998580 -13.716943 748 0 -6.0389E-01 5.972792 2.674460 -99.000000 -99.000000 -4.831873 72.499884 0.998580 0.000610 0.001420 0.015472 5 7.3235E+00 -4.792376 6.105468 -99.000000 -99.000000 -7.375848 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -9.9710992023671920 rel_E_err 1.0688107115722932D-10 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854001264405543E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 5.991036 8964.961 -99.000000 -99.000000 72.499855 0.000000 0.000000 0.000074 0.998580 -13.651112 755 0 -7.1491E-01 5.991036 2.663643 -99.000000 -99.000000 -4.858320 72.499855 0.998580 0.000610 0.001420 0.015486 4 9.3605E+00 -4.736418 6.092174 -99.000000 -99.000000 -7.370089 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6109703588067124 rel_E_err 2.4492303994700332D-12 save LOGS/profile2.data for model 100 save photos/x100 for model 100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854350947595995E-002 110 6.009114 9006.030 -99.000000 -99.000000 72.499827 0.000000 0.000000 0.000074 0.998580 -13.585607 758 0 -6.2863E-01 6.009114 2.654242 -99.000000 -99.000000 -4.879573 72.499827 0.998580 0.000610 0.001420 0.015502 4 1.1501E+01 -4.680848 6.081310 -99.000000 -99.000000 -7.366111 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5980572392103287 rel_E_err 2.5231482042934599D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854565925602773E-002 120 6.027812 9047.864 -99.000000 -99.000000 72.499796 0.000000 0.000000 0.000074 0.998580 -13.517629 760 0 -6.1035E-01 6.027812 2.646109 -99.000000 -99.000000 -4.897045 72.499796 0.998580 0.000610 0.001420 0.015520 3 1.3837E+01 -4.623275 6.073097 -99.000000 -99.000000 -7.364244 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6263193198801762 rel_E_err 2.3641807679014258D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854946787544487E-002 130 6.045715 9086.368 -99.000000 -99.000000 72.499767 0.000000 0.000000 0.000074 0.998580 -13.452382 759 0 -6.4987E-01 6.045715 2.640025 -99.000000 -99.000000 -4.908408 72.499767 0.998580 0.000610 0.001420 0.015538 3 1.6180E+01 -4.568080 6.068305 -99.000000 -99.000000 -7.364635 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6280672206894380 rel_E_err 2.3546847943798192D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9855816014654985E-002 140 6.063471 9123.596 -99.000000 -99.000000 72.499738 0.000000 0.000000 0.000074 0.998580 -13.387595 760 0 -6.4843E-01 6.063471 2.635789 -99.000000 -99.000000 -4.914115 72.499738 0.998580 0.000610 0.001420 0.015556 3 1.8596E+01 -4.513304 6.066936 -99.000000 -99.000000 -7.367441 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6362561078253552 rel_E_err 2.3107017442479121D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9857570301427417E-002 150 6.081543 9160.937 -99.000000 -99.000000 72.499707 0.000000 0.000000 0.000074 0.998580 -13.321660 761 0 -5.5954E-01 6.081543 2.633418 -99.000000 -99.000000 -4.913747 72.499707 0.998580 0.000610 0.001420 0.015574 3 2.1135E+01 -4.457556 6.069290 -99.000000 -99.000000 -7.373020 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.6433326974914131 rel_E_err 2.2733552272923974D-12 save photos/x150 for model 150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9860722190062388E-002 160 6.100028 9199.230 -99.000000 -99.000000 72.499674 0.000000 0.000000 0.000074 0.998580 -13.254295 764 0 -4.7182E-01 6.100028 2.633023 -99.000000 -99.000000 -4.906961 72.499674 0.998580 0.000610 0.001420 0.015592 3 2.3798E+01 -4.400566 6.075746 -99.000000 -99.000000 -7.381774 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6536422222353391 rel_E_err 2.2200245534229435D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9865845250475350E-002 170 6.118173 9234.968 -99.000000 -99.000000 72.499640 0.000000 0.000000 0.000074 0.998580 -13.188317 767 0 -5.4250E-01 6.118173 2.634597 -99.000000 -99.000000 -4.893864 72.499640 0.998580 0.000610 0.001420 0.015609 3 2.6460E+01 -4.344690 6.085629 -99.000000 -99.000000 -7.392881 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6559850727903207 rel_E_err 2.2080806260302659D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9873152751975751E-002 180 6.136048 9269.023 -99.000000 -99.000000 72.499606 0.000000 0.000000 0.000074 0.998580 -13.123524 765 0 -5.3693E-01 6.136048 2.637872 -99.000000 -99.000000 -4.875741 72.499606 0.998580 0.000610 0.001420 0.015625 3 2.9116E+01 -4.289732 6.098574 -99.000000 -99.000000 -7.406203 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7046308046453049 rel_E_err 1.9741002129340937D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9882909065043260E-002 190 6.153979 9300.686 -99.000000 -99.000000 72.499569 0.000000 0.000000 0.000074 0.998580 -13.058782 768 0 -5.3290E-01 6.153979 2.642640 -99.000000 -99.000000 -4.853095 72.499569 0.998580 0.000610 0.001420 0.015640 3 3.1801E+01 -4.234713 6.114034 -99.000000 -99.000000 -7.421274 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7034383541886093 rel_E_err 1.9795279848545675D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9895518694199963E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 6.171634 9328.753 -99.000000 -99.000000 72.499531 0.000000 0.000000 0.000074 0.998580 -12.995307 770 0 -4.5119E-01 6.171634 2.648492 -99.000000 -99.000000 -4.828226 72.499531 0.998580 0.000610 0.001420 0.015653 3 3.4455E+01 -4.180656 6.130972 -99.000000 -99.000000 -7.437182 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7053678785530657 rel_E_err 1.9707526601261384D-12 save LOGS/profile3.data for model 200 save photos/x200 for model 200 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9910776869980788E-002 210 6.188944 9351.824 -99.000000 -99.000000 72.499490 0.000000 0.000000 0.000074 0.998580 -12.933354 777 0 -5.2805E-01 6.188944 2.655113 -99.000000 -99.000000 -4.800693 72.499490 0.998580 0.000610 0.001420 0.015665 3 3.7065E+01 -4.127779 6.148504 -99.000000 -99.000000 -7.453028 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7193841496552782 rel_E_err 1.9081646690995895D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9928330396668665E-002 220 6.206686 9370.085 -99.000000 -99.000000 72.499446 0.000000 0.000000 0.000074 0.998580 -12.870138 776 0 -6.0512E-01 6.206686 2.662536 -99.000000 -99.000000 -4.771599 72.499446 0.998580 0.000610 0.001420 0.015675 3 3.9745E+01 -4.073703 6.166740 -99.000000 -99.000000 -7.468827 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7185869807495884 rel_E_err 1.9116704158065720D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9948666965381411E-002 230 6.224794 9382.129 -99.000000 -99.000000 72.499398 0.000000 0.000000 0.000074 0.998580 -12.805913 777 0 -6.0261E-01 6.224794 2.670624 -99.000000 -99.000000 -4.742227 72.499398 0.998580 0.000610 0.001420 0.015684 3 4.2487E+01 -4.018641 6.185147 -99.000000 -99.000000 -7.483878 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7053047420233423 rel_E_err 1.9710391835196271D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9971455607816089E-002 240 6.242934 9387.451 -99.000000 -99.000000 72.499346 0.000000 0.000000 0.000074 0.998580 -12.741851 779 0 -5.9932E-01 6.242934 2.679130 -99.000000 -99.000000 -4.712991 72.499346 0.998580 0.000610 0.001420 0.015691 3 4.5245E+01 -3.963601 6.203145 -99.000000 -99.000000 -7.497585 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7499903306928246 rel_E_err 1.7783190028083265D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9995920397351660E-002 250 6.261110 9386.526 -99.000000 -99.000000 72.499291 0.000000 0.000000 0.000074 0.998580 -12.677928 779 0 -5.9607E-01 6.261110 2.687964 -99.000000 -99.000000 -4.684114 72.499291 0.998580 0.000610 0.001420 0.015697 3 4.8022E+01 -3.908567 6.220642 -99.000000 -99.000000 -7.509885 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7224898051379771 rel_E_err 1.8945679879415207D-12 save photos/x250 for model 250 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0021767648148205E-002 260 6.279315 9380.563 -99.000000 -99.000000 72.499231 0.000000 0.000000 0.000074 0.998580 -12.614155 785 0 -5.9226E-01 6.279315 2.697041 -99.000000 -99.000000 -4.655579 72.499231 0.998580 0.000610 0.001420 0.015702 3 5.0822E+01 -3.853553 6.237692 -99.000000 -99.000000 -7.520984 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7703417452316952 rel_E_err 1.6969078344626466D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0048836943680552E-002 270 6.297548 9370.370 -99.000000 -99.000000 72.499166 0.000000 0.000000 0.000074 0.998580 -12.550526 788 0 -5.8793E-01 6.297548 2.706275 -99.000000 -99.000000 -4.627491 72.499166 0.998580 0.000610 0.001420 0.015706 3 5.3648E+01 -3.798561 6.254270 -99.000000 -99.000000 -7.530988 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7447940762760705 rel_E_err 1.7997240644273598D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0076949909071586E-002 280 6.315807 9357.054 -99.000000 -99.000000 72.499096 0.000000 0.000000 0.000074 0.998580 -12.487035 787 0 -5.8311E-01 6.315807 2.715593 -99.000000 -99.000000 -4.599879 72.499096 0.998580 0.000610 0.001420 0.015708 3 5.6504E+01 -3.743587 6.270436 -99.000000 -99.000000 -7.540138 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7515140621528520 rel_E_err 1.7720906651446240D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0105765478566081E-002 290 6.334092 9342.110 -99.000000 -99.000000 72.499021 0.000000 0.000000 0.000074 0.998580 -12.423671 800 0 -5.7783E-01 6.334092 2.724894 -99.000000 -99.000000 -4.572668 72.499021 0.998580 0.000610 0.001420 0.015709 3 5.9393E+01 -3.688630 6.286262 -99.000000 -99.000000 -7.548758 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7504144683852072 rel_E_err 1.7765831209051626D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0134832918335948E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 6.352742 9325.355 -99.000000 -99.000000 72.498939 0.000000 0.000000 0.000074 0.998580 -12.359255 800 0 -4.9346E-01 6.352742 2.734267 -99.000000 -99.000000 -4.546124 72.498939 0.998580 0.000610 0.001420 0.015709 3 6.2374E+01 -3.632668 6.301888 -99.000000 -99.000000 -7.556923 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7727175031886073 rel_E_err 1.6876504393853438D-12 save LOGS/profile4.data for model 300 save photos/x300 for model 300 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0164191711657010E-002 310 6.371810 9308.630 -99.000000 -99.000000 72.498848 0.000000 0.000000 0.000074 0.998580 -12.293605 803 0 -4.0866E-01 6.371810 2.743582 -99.000000 -99.000000 -4.519788 72.498848 0.998580 0.000610 0.001420 0.015708 4 6.5462E+01 -3.575542 6.317400 -99.000000 -99.000000 -7.565031 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7679083686490635 rel_E_err 1.7064423915677617D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0193417029321586E-002 320 6.390498 9292.291 -99.000000 -99.000000 72.498752 0.000000 0.000000 0.000074 0.998580 -12.229450 807 0 -4.8102E-01 6.390498 2.752410 -99.000000 -99.000000 -4.493851 72.498752 0.998580 0.000610 0.001420 0.015707 3 6.8531E+01 -3.519634 6.332005 -99.000000 -99.000000 -7.572578 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7657213897843373 rel_E_err 1.7150572045595714D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0220817743074556E-002 330 6.409030 9276.670 -99.000000 -99.000000 72.498649 0.000000 0.000000 0.000074 0.998580 -12.166005 814 0 -5.1315E-01 6.409030 2.760858 -99.000000 -99.000000 -4.469372 72.498649 0.998580 0.000610 0.001420 0.015704 3 7.1623E+01 -3.464267 6.345978 -99.000000 -99.000000 -7.579821 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7602342737917596 rel_E_err 1.7368636503637434D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0246400329750378E-002 340 6.427497 9262.156 -99.000000 -99.000000 72.498540 0.000000 0.000000 0.000074 0.998580 -12.102945 828 0 -5.2496E-01 6.427497 2.768881 -99.000000 -99.000000 -4.446192 72.498540 0.998580 0.000610 0.001420 0.015700 3 7.4756E+01 -3.409165 6.359303 -99.000000 -99.000000 -7.586814 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7731239650750812 rel_E_err 1.6860716841676054D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0269929879937074E-002 350 6.445941 9248.402 -99.000000 -99.000000 72.498423 0.000000 0.000000 0.000074 0.998580 -12.040118 837 0 -5.2637E-01 6.445941 2.776549 -99.000000 -99.000000 -4.424000 72.498423 0.998580 0.000610 0.001420 0.015696 3 7.7941E+01 -3.354198 6.372058 -99.000000 -99.000000 -7.593549 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7588660021497464 rel_E_err 1.7423443759309253D-12 save photos/x350 for model 350 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0291215404426175E-002 360 6.464379 9236.152 -99.000000 -99.000000 72.498297 0.000000 0.000000 0.000074 0.998580 -11.977450 839 0 -5.2233E-01 6.464379 2.783796 -99.000000 -99.000000 -4.402881 72.498297 0.998580 0.000610 0.001420 0.015691 3 8.1187E+01 -3.299309 6.384250 -99.000000 -99.000000 -7.600157 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7597153311706517 rel_E_err 1.7389402857639353D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0310072018202154E-002 370 6.482821 9224.987 -99.000000 -99.000000 72.498163 0.000000 0.000000 0.000074 0.998580 -11.914902 836 0 -5.1535E-01 6.482821 2.790658 -99.000000 -99.000000 -4.382793 72.498163 0.998580 0.000610 0.001420 0.015685 3 8.4500E+01 -3.244465 6.395872 -99.000000 -99.000000 -7.606556 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7805692221733249 rel_E_err 1.6574131408059779D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0326306288709317E-002 380 6.501268 9215.280 -99.000000 -99.000000 72.498019 0.000000 0.000000 0.000074 0.998580 -11.852451 845 0 -5.0668E-01 6.501268 2.797134 -99.000000 -99.000000 -4.363686 72.498019 0.998580 0.000610 0.001420 0.015678 3 8.7887E+01 -3.189654 6.406996 -99.000000 -99.000000 -7.612857 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7586005297025888 rel_E_err 1.7434097494131891D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0339796231027441E-002 390 6.520057 9206.944 -99.000000 -99.000000 72.497863 0.000000 0.000000 0.000074 0.998580 -11.788956 852 0 -4.1814E-01 6.520057 2.803309 -99.000000 -99.000000 -4.345554 72.497863 0.998580 0.000610 0.001420 0.015671 3 9.1416E+01 -3.133877 6.417774 -99.000000 -99.000000 -7.619152 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7619837732099715 rel_E_err 1.7298809925282291D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0350567028624034E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 400 6.539591 9199.685 -99.000000 -99.000000 72.497689 0.000000 0.000000 0.000074 0.998580 -11.723044 854 0 -4.0731E-01 6.539591 2.809336 -99.000000 -99.000000 -4.327307 72.497689 0.998580 0.000610 0.001420 0.015664 3 9.5177E+01 -3.075930 6.428458 -99.000000 -99.000000 -7.625567 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7696488875533074 rel_E_err 1.6996171803503738D-12 save LOGS/profile5.data for model 400 save photos/x400 for model 400 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0358504306507875E-002 410 6.558308 9193.882 -99.000000 -99.000000 72.497511 0.000000 0.000000 0.000074 0.998580 -11.659962 852 0 -4.5547E-01 6.558308 2.814764 -99.000000 -99.000000 -4.310497 72.497511 0.998580 0.000610 0.001420 0.015656 3 9.8873E+01 -3.020438 6.438218 -99.000000 -99.000000 -7.631572 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7707586293845168 rel_E_err 1.6952797351066859D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0362983377078919E-002 420 6.576849 9190.038 -99.000000 -99.000000 72.497324 0.000000 0.000000 0.000074 0.998580 -11.597525 858 0 -4.5884E-01 6.576849 2.819751 -99.000000 -99.000000 -4.294884 72.497324 0.998580 0.000610 0.001420 0.015648 3 1.0263E+02 -2.965488 6.447465 -99.000000 -99.000000 -7.637543 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7210807340685683 rel_E_err 1.9007249079013678D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0364338102797274E-002 430 6.595687 9187.695 -99.000000 -99.000000 72.497121 0.000000 0.000000 0.000074 0.998580 -11.534133 872 0 -3.7160E-01 6.595687 2.824438 -99.000000 -99.000000 -4.280184 72.497121 0.998580 0.000610 0.001420 0.015639 3 1.0655E+02 -2.909679 6.456396 -99.000000 -99.000000 -7.643544 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7273919062703396 rel_E_err 1.8733032808378554D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0362549407040979E-002 440 6.615243 9186.768 -99.000000 -86.081516 72.496897 0.000000 0.000000 0.000074 0.998580 -11.468348 884 0 -3.6081E-01 6.615243 2.828929 -99.000000 -99.000000 -4.265502 72.496897 0.998580 0.000610 0.001420 0.015630 3 1.1073E+02 -2.851749 6.465203 -86.081516 -99.000000 -7.649701 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6985939983771097 rel_E_err 2.0017323212330004D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0357316381677149E-002 450 6.633963 9187.807 -99.000000 -84.115425 72.496670 0.000000 0.000000 0.000074 0.998580 -11.405387 892 0 -4.0775E-01 6.633963 2.832900 -99.000000 -99.000000 -4.251950 72.496670 0.998580 0.000610 0.001420 0.015622 3 1.1485E+02 -2.796301 6.473340 -84.115425 -99.000000 -7.655720 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7790499168783480 rel_E_err 1.6632214722668889D-12 save photos/x450 for model 450 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0349130934486905E-002 460 6.652500 9190.997 -99.000000 -82.553822 72.496431 0.000000 0.000000 0.000074 0.998580 -11.343051 903 0 -4.0988E-01 6.652500 2.836370 -99.000000 -99.000000 -4.239692 72.496431 0.998580 0.000610 0.001420 0.015613 3 1.1905E+02 -2.741398 6.480883 -82.553822 -99.000000 -7.661690 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7828596570606141 rel_E_err 1.6486950838392274D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0337964623349644E-002 470 6.671328 9196.062 -99.000000 -80.989695 72.496175 0.000000 0.000000 0.000074 0.998580 -11.279747 913 0 -3.2155E-01 6.671328 2.839611 -82.672962 -99.000000 -4.227976 72.496175 0.998580 0.000610 0.001420 0.015605 3 1.2344E+02 -2.685636 6.488323 -80.998795 -99.000000 -7.667928 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7490180226625203 rel_E_err 1.7823048025560104D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0323555794169960E-002 480 6.690869 9204.116 -99.000000 -79.397594 72.495892 0.000000 0.000000 0.000074 0.998580 -11.214062 932 0 -3.0939E-01 6.690869 2.842439 -81.025330 -99.000000 -4.216694 72.495892 0.998580 0.000610 0.001420 0.015595 3 1.2815E+02 -2.627768 6.495500 -79.407951 -99.000000 -7.674527 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7393916507584510 rel_E_err 1.8222516378266240D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0305295933313560E-002 490 6.709575 9214.335 -99.000000 -77.897183 72.495606 0.000000 0.000000 0.000074 0.998580 -11.151194 943 0 -3.5482E-01 6.709575 2.844786 -79.571042 -99.000000 -4.206338 72.495606 0.998580 0.000610 0.001420 0.015587 3 1.3279E+02 -2.572376 6.502122 -77.906485 -99.000000 -7.681153 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7735580135391427 rel_E_err 1.6843874094048192D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0284739797785730E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 500 6.728100 9227.657 -99.000000 -76.431633 72.495307 0.000000 0.000000 0.000074 0.998580 -11.088951 955 0 -3.5550E-01 6.728100 2.846588 -78.152893 -99.000000 -4.197203 72.495307 0.998580 0.000610 0.001420 0.015578 3 1.3754E+02 -2.517527 6.508236 -76.439964 -99.000000 -7.688030 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7857134218691026 rel_E_err 1.6378969648540720D-12 save LOGS/profile6.data for model 500 save photos/x500 for model 500 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0261435302439090E-002 510 6.746913 9244.927 -99.000000 -74.963541 72.494987 0.000000 0.000000 0.000074 0.998580 -11.025753 963 0 -2.6579E-01 6.746913 2.847842 -76.731684 -99.000000 -4.189001 72.494987 0.998580 0.000610 0.001420 0.015569 4 1.4253E+02 -2.461828 6.513992 -74.971012 -99.000000 -7.695464 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7670754607591554 rel_E_err 1.7097182175003057D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0234802698215135E-002 520 6.766437 9268.496 -99.000000 -73.461377 72.494637 0.000000 0.000000 0.000074 0.998580 -10.960184 982 0 -2.5211E-01 6.766437 2.848310 -75.276679 -99.000000 -4.181953 72.494637 0.998580 0.000610 0.001420 0.015560 4 1.4789E+02 -2.404032 6.519350 -73.468074 -99.000000 -7.703941 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7956165505930120 rel_E_err 1.6009709418649937D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0203807041338660E-002 530 6.785123 9297.092 -99.000000 -72.043701 72.494285 0.000000 0.000000 0.000074 0.998580 -10.897432 994 0 -2.9547E-01 6.785123 2.847865 -73.902708 -99.000000 -4.176534 72.494285 0.998580 0.000610 0.001420 0.015551 4 1.5320E+02 -2.348714 6.523812 -72.049752 -99.000000 -7.712951 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7664952306020183 rel_E_err 1.7120039777326247D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0171318361589905E-002 540 6.803623 9334.567 -99.000000 -70.659278 72.493920 0.000000 0.000000 0.000074 0.998580 -10.835308 1010 0 -2.9399E-01 6.803623 2.846167 -72.560173 -99.000000 -4.173252 72.493920 0.998580 0.000610 0.001420 0.015542 4 1.5866E+02 -2.293948 6.527405 -70.664769 -99.000000 -7.723437 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7483944150397619 rel_E_err 1.7848658694509644D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0136439163975819E-002 550 6.822399 9383.941 -99.000000 -69.273325 72.493533 0.000000 0.000000 0.000074 0.998580 -10.772247 1017 0 -2.0193E-01 6.822399 2.842657 -71.215328 -99.000000 -4.172607 72.493533 0.998580 0.000610 0.001420 0.015534 4 1.6442E+02 -2.238359 6.529549 -69.278317 -99.000000 -7.735878 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7508859794895688 rel_E_err 1.7746553411676802D-12 save photos/x550 for model 550 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0098260214039065E-002 560 6.841612 9456.220 -99.000000 -67.874801 72.493122 0.000000 0.000000 0.000074 0.998580 -10.707693 1022 0 -1.9724E-01 6.841612 2.835981 -69.857405 -99.000000 -4.177845 72.493122 0.998580 0.000610 0.001420 0.015525 4 1.7058E+02 -2.181462 6.529526 -67.879345 -99.000000 -7.752760 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7640457432743499 rel_E_err 1.7216872239395713D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0056741834853676E-002 570 6.859831 9549.903 -99.000000 -66.566829 72.492720 0.000000 0.000000 0.000074 0.998580 -10.646433 1035 0 -2.3507E-01 6.859831 2.826508 -68.586557 -99.000000 -4.187429 72.492720 0.998580 0.000610 0.001420 0.015517 5 1.7670E+02 -2.127489 6.527706 -66.570999 -99.000000 -7.775073 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7643225399394122 rel_E_err 1.7205902598573835D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0016112877057402E-002 580 6.877915 9688.173 -99.000000 -65.285746 72.492314 0.000000 0.000000 0.000074 0.998580 -10.585553 1055 0 -1.9113E-01 6.877915 2.811122 -67.340997 -99.000000 -4.206158 72.492314 0.998580 0.000610 0.001420 0.015509 5 1.8309E+02 -2.073880 6.521906 -65.289587 -99.000000 -7.809508 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7614598705335460 rel_E_err 1.7319690599150941D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9975120942274175E-002 590 6.895049 9901.976 -99.000000 -64.087669 72.491928 0.000000 0.000000 0.000074 0.998580 -10.527774 1059 0 -1.8529E-01 6.895049 2.787810 -66.175347 -99.000000 -4.234357 72.491928 0.998580 0.000610 0.001420 0.015502 5 1.8949E+02 -2.023046 6.513200 -64.091233 -99.000000 -7.873188 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7510229705535245 rel_E_err 1.7740956435554165D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9937181915949718E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 600 6.910029 1.030E+04 -99.000000 -63.052469 72.491599 0.000000 0.000000 0.000074 0.998580 -10.477162 1054 0 -2.9782E-01 6.910029 2.750506 -65.167519 -99.000000 -4.270671 72.491599 0.998580 0.000610 0.001420 0.015497 5 1.9539E+02 -1.978557 6.507875 -63.055814 -99.000000 -8.035634 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7644223257122729 rel_E_err 1.7201949734485648D-12 save LOGS/profile7.data for model 600 save photos/x600 for model 600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9904947609737379E-002 retry: eos evaluated at too low a density 605 610 6.918665 1.102E+04 -99.000000 -62.460879 72.491420 0.000000 0.000000 0.000074 0.998580 -10.447960 1033 1 -4.8273E-01 6.918665 2.691001 -64.591301 -99.000000 -4.317169 72.491420 0.998580 0.000610 0.001420 0.015494 7 1.9890E+02 -1.952899 6.505963 -62.464108 -99.000000 -8.397372 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7615518335830593 rel_E_err 1.7316023495364234D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9886520999805078E-002 620 6.926491 1.340E+04 -99.000000 -61.927997 72.491282 0.000000 0.000000 0.000074 0.998580 -10.421462 1056 1 -4.9383E-01 6.926491 2.515475 -64.072085 -99.000000 -4.434924 72.491282 0.998580 0.000610 0.001420 0.015491 5 2.0219E+02 -1.929632 6.494549 -61.931125 -99.000000 -9.930839 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7572667640271380 rel_E_err 1.7487721808095884D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9871913485352868E-002 630 6.933866 1.829E+04 -99.000000 -61.428666 72.491149 0.000000 0.000000 0.000074 0.998580 -10.396377 1044 1 -4.2808E-01 6.933866 2.225456 -63.585366 -99.000000 -4.371416 72.491149 0.998580 0.000610 0.001420 0.015490 5 2.0549E+02 -1.907655 6.454016 -61.431704 -99.000000 -9.860400 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7420144115627689 rel_E_err 1.8112799863796801D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9864286503503325E-002 640 6.949118 2.073E+04 -99.000000 -60.404595 72.490831 0.000000 0.000000 0.000074 0.998580 -10.344053 1041 1 -5.6998E-02 6.949118 2.100987 -62.586524 -99.000000 -4.382521 72.490831 0.998580 0.000610 0.001420 0.015488 3 2.1313E+02 -1.862011 6.423130 -60.407461 -99.000000 -9.609074 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7645512093430415 rel_E_err 1.7196845546219391D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9860056109622320E-002 650 6.967367 2.138E+04 -99.000000 -59.194374 72.490426 0.000000 0.000000 0.000074 0.998580 -10.281354 1039 1 -4.9392E-02 6.967367 2.073930 -61.405276 -99.000000 -4.369348 72.490426 0.998580 0.000610 0.001420 0.015487 3 2.2275E+02 -1.807356 6.422792 -59.197055 -99.000000 -9.554029 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7682126630303348 rel_E_err 1.7052471680910269D-12 save photos/x650 for model 650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9855681641247729E-002 660 6.986650 2.191E+04 -99.000000 -57.933101 72.489965 0.000000 0.000000 0.000074 0.998580 -10.215106 1040 1 1.2237E-01 6.986650 2.054069 -60.173241 -99.000000 -4.353437 72.489965 0.998580 0.000610 0.001420 0.015486 3 2.3332E+02 -1.749604 6.425212 -57.935607 -99.000000 -9.514901 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7401701775884639 rel_E_err 1.8189879514643089D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9850897167783225E-002 670 7.005369 2.237E+04 -99.000000 -51.679578 72.489483 0.000000 0.000000 0.000074 0.998580 -10.150807 1039 1 2.0137E-02 7.005369 2.037466 -58.992806 -13.459788 -4.336256 72.489483 0.998580 0.000610 0.001420 0.015485 3 2.4397E+02 -1.693542 6.428369 -51.679578 -99.000000 -9.482534 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7523071819996954 rel_E_err 1.7688573804632449D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9846082572588277E-002 680 7.023726 2.280E+04 -99.000000 -50.076406 72.488973 0.000000 0.000000 0.000074 0.998580 -10.087776 1037 1 6.2058E-03 7.023726 2.022704 -57.849932 -11.104916 -4.319567 72.488973 0.998580 0.000610 0.001420 0.015484 3 2.5479E+02 -1.638573 6.431882 -50.076406 -99.000000 -9.454171 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7500015220905105 rel_E_err 1.7782731776376682D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9841210026195323E-002 690 7.042004 2.322E+04 -99.000000 -48.990535 72.488427 0.000000 0.000000 0.000074 0.998580 -10.025046 1038 1 1.4014E-02 7.042004 2.008845 -56.726278 -10.147585 -4.302891 72.488427 0.998580 0.000610 0.001420 0.015482 3 2.6595E+02 -1.583851 6.435608 -48.990535 -99.000000 -9.428476 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7562445984016275 rel_E_err 1.7528929793179552D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9836216508951739E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 700 7.061318 2.366E+04 -99.000000 -47.891824 72.487821 0.000000 0.000000 0.000074 0.998580 -9.958794 1039 1 1.8459E-01 7.061318 1.994387 -55.554146 -9.475857 -4.185815 72.487821 0.998580 0.000610 0.001420 0.015481 3 2.7816E+02 -1.526039 6.439613 -47.891824 -99.000000 -9.403212 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7710876978929218 rel_E_err 1.6939956942044784D-12 save LOGS/profile8.data for model 700 save photos/x700 for model 700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9830782479876561E-002 710 7.080057 2.411E+04 -99.000000 -46.843599 72.486927 0.000000 0.000000 0.000074 0.998580 -9.894545 1036 1 8.1708E-02 7.080057 1.979998 -54.431693 -8.973234 -4.135432 72.486927 0.998580 0.000610 0.001420 0.015479 3 2.9044E+02 -1.469959 6.443410 -46.843599 -99.000000 -9.380194 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7651352165129488 rel_E_err 1.7173736038856018D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9825454662404569E-002 720 7.098428 2.457E+04 -99.000000 -45.830026 72.486008 0.000000 0.000000 0.000074 0.998580 -9.831584 1040 1 6.7678E-02 7.098428 1.965331 -53.345097 -8.560984 -4.129963 72.486008 0.998580 0.000610 0.001420 0.015477 3 3.0291E+02 -1.414988 6.447016 -45.830026 -99.000000 -9.359601 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7633251910097254 rel_E_err 1.7245461028361280D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9820068374543497E-002 730 7.116715 2.507E+04 -99.000000 -44.834556 72.485049 0.000000 0.000000 0.000074 0.998580 -9.768939 1044 1 7.5802E-02 7.116715 1.949639 -52.276853 -8.202234 -4.124907 72.485049 0.998580 0.000610 0.001420 0.015476 3 3.1576E+02 -1.360279 6.450350 -44.834556 -99.000000 -9.341495 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7810047416567354 rel_E_err 1.6557518857589712D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9814532180168759E-002 740 7.136030 2.564E+04 -99.000000 -43.797342 72.483986 0.000000 0.000000 0.000074 0.998580 -9.702793 1045 1 2.4689E-01 7.136030 1.931561 -51.162474 -7.862927 -4.120277 72.483986 0.998580 0.000610 0.001420 0.015474 4 3.2985E+02 -1.302497 6.453516 -43.797342 -99.000000 -9.326154 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7737985218221208 rel_E_err 1.6834548694153990D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9808478981634425E-002 750 7.154766 2.626E+04 -99.000000 -42.805111 72.482904 0.000000 0.000000 0.000074 0.998580 -9.638650 1042 1 1.4496E-01 7.154766 1.912230 -50.094685 -7.563083 -4.116091 72.482904 0.998580 0.000610 0.001420 0.015472 3 3.4404E+02 -1.246454 6.456180 -42.805111 -99.000000 -9.316403 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7742719917648309 rel_E_err 1.6816205588510012D-12 save photos/x750 for model 750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9802382985208881E-002 760 7.173129 2.693E+04 -99.000000 -41.845678 72.481793 0.000000 0.000000 0.000074 0.998580 -9.575799 1051 1 1.3215E-01 7.173129 1.891252 -49.059839 -7.291108 -4.112732 72.481793 0.998580 0.000610 0.001420 0.015470 3 3.5848E+02 -1.191530 6.458365 -41.845678 -99.000000 -9.327058 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7699765425386218 rel_E_err 1.6983353818352626D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9796175535868558E-002 770 7.191403 2.767E+04 -99.000000 -40.903534 72.480637 0.000000 0.000000 0.000074 0.998580 -9.513260 1049 1 1.4161E-01 7.191403 1.868714 -48.040357 -7.037765 -4.110067 72.480637 0.998580 0.000610 0.001420 0.015468 3 3.7342E+02 -1.136872 6.460096 -40.903534 -99.000000 -9.340059 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7596568697347106 rel_E_err 1.7391743844989597D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9789750855943138E-002 780 7.210700 2.853E+04 -99.000000 -39.922164 72.479360 0.000000 0.000000 0.000074 0.998580 -9.447229 1054 1 3.1383E-01 7.210700 1.842910 -46.973522 -6.785450 -4.108056 72.479360 0.998580 0.000610 0.001420 0.015466 4 3.8983E+02 -1.079154 6.461430 -39.922164 -99.000000 -9.386087 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7667416716906459 rel_E_err 1.7110327739572841D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9782678585009810E-002 790 7.229414 2.943E+04 -99.000000 -38.983449 72.478063 0.000000 0.000000 0.000074 0.998580 -9.383187 1057 1 2.1359E-01 7.229414 1.816264 -45.946791 -6.552861 -4.106693 72.478063 0.998580 0.000610 0.001420 0.015464 3 4.0643E+02 -1.023172 6.462269 -38.983449 -99.000000 -9.477655 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7826267126662891 rel_E_err 1.6495796386990667D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9775508677283651E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 800 7.247754 3.038E+04 -99.000000 -38.075803 72.476736 0.000000 0.000000 0.000074 0.998580 -9.320419 1062 1 2.0228E-01 7.247754 1.788814 -44.946791 -6.334337 -4.105996 72.476736 0.998580 0.000610 0.001420 0.015462 3 4.2338E+02 -0.968303 6.462695 -38.075803 -99.000000 -9.623157 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7603709183123186 rel_E_err 1.7363172571262305D-12 save LOGS/profile9.data for model 800 save photos/x800 for model 800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9768160271660077E-002 810 7.266004 3.139E+04 -99.000000 -37.184548 72.475359 0.000000 0.000000 0.000074 0.998580 -9.257950 1070 1 2.1307E-01 7.266004 1.760451 -43.956814 -6.124515 -4.105829 72.475359 0.998580 0.000610 0.001420 0.015460 3 4.4095E+02 -0.913696 6.462777 -37.184548 -99.000000 -9.809150 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7497073282425379 rel_E_err 1.7794781993122496D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9760505829532955E-002 820 7.285271 3.254E+04 -99.000000 -36.256273 72.473841 0.000000 0.000000 0.000074 0.998580 -9.191983 1070 1 3.8627E-01 7.285271 1.729224 -42.916420 -5.909925 -4.106097 72.473841 0.998580 0.000610 0.001420 0.015459 4 4.6033E+02 -0.856031 6.462556 -36.256273 -99.000000 -9.969929 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7682322915789186 rel_E_err 1.7051700987938163D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9752025992545546E-002 830 7.303959 3.371E+04 -99.000000 -35.368250 72.472303 0.000000 0.000000 0.000074 0.998580 -9.127985 1076 1 2.8721E-01 7.303959 1.698123 -41.911642 -5.707729 -4.106731 72.472303 0.998580 0.000610 0.001420 0.015457 4 4.7997E+02 -0.800090 6.462132 -35.368250 -99.000000 -10.052993 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7582122607025621 rel_E_err 1.7449690937421784D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9743376628334240E-002 840 7.322277 3.492E+04 -99.000000 -34.509351 72.470732 0.000000 0.000000 0.000074 0.998580 -9.065233 1081 1 2.7703E-01 7.322277 1.667193 -40.930225 -5.514661 -4.107539 72.470732 0.998580 0.000610 0.001420 0.015456 3 5.0008E+02 -0.745265 6.461588 -34.509351 -99.000000 -10.076738 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7332930465920704 rel_E_err 1.8480212186646252D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9734487737107808E-002 850 7.340519 3.617E+04 -99.000000 -33.665237 72.469102 0.000000 0.000000 0.000074 0.998580 -9.002718 1082 1 2.8903E-01 7.340519 1.636439 -39.955128 -5.327110 -4.108452 72.469102 0.998580 0.000610 0.001420 0.015454 3 5.2099E+02 -0.690703 6.460976 -33.665237 -99.000000 -10.065436 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7738367464261788 rel_E_err 1.6833067059762347D-12 save photos/x850 for model 850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9725400585022868E-002 860 7.359789 3.752E+04 -99.000000 -32.785543 72.467305 0.000000 0.000000 0.000074 0.998580 -8.936646 1084 1 4.6291E-01 7.359789 1.604330 -38.924755 -5.133863 -4.109413 72.467305 0.998580 0.000610 0.001420 0.015452 4 5.4409E+02 -0.633071 6.460304 -32.785543 -99.000000 -10.011293 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7449952353714462 rel_E_err 1.7988906505827227D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9715879971000384E-002 870 7.378476 3.884E+04 -99.000000 -31.944067 72.465485 0.000000 0.000000 0.000074 0.998580 -8.872535 1082 1 3.6410E-01 7.378476 1.573994 -37.920116 -4.951068 -4.110380 72.465485 0.998580 0.000610 0.001420 0.015450 3 5.6753E+02 -0.577133 6.459691 -31.944068 -99.000000 -9.946149 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7626604561138031 rel_E_err 1.7271877291717456D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9706878132758705E-002 880 7.396780 4.014E+04 -99.000000 -31.130891 72.463626 0.000000 0.000000 0.000074 0.998580 -8.809720 1087 1 3.5326E-01 7.396780 1.544988 -36.922512 -4.776263 -4.111203 72.463626 0.998580 0.000610 0.001420 0.015450 3 5.9152E+02 -0.522279 6.459152 -31.130891 -99.000000 -9.879812 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7617362001539636 rel_E_err 1.7308674062056432D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9698112271768029E-002 890 7.414987 4.145E+04 -99.000000 -30.332610 72.461701 0.000000 0.000000 0.000074 0.998580 -8.747224 1087 1 3.6434E-01 7.414987 1.516969 -35.903538 -4.606293 -4.111900 72.461701 0.998580 0.000610 0.001420 0.015449 3 6.1641E+02 -0.467682 6.458697 -30.332611 -99.000000 -9.812058 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7640004828533513 rel_E_err 1.7218666605947687D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9689108108986658E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 900 7.434214 4.284E+04 -99.000000 -29.500921 72.459581 0.000000 0.000000 0.000074 0.998580 -8.681222 1089 1 5.3761E-01 7.434214 1.488094 -34.780295 -4.430730 -4.112470 72.459581 0.998580 0.000610 0.001420 0.015449 3 6.4387E+02 -0.410019 6.458306 -29.500923 -99.000000 -9.684650 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7835087714054616 rel_E_err 1.6462327171826843D-12 save LOGS/profile10.data for model 900 save photos/x900 for model 900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9679052197518040E-002 910 7.452866 4.420E+04 -99.000000 -28.705009 72.457435 0.000000 0.000000 0.000074 0.998580 -8.617190 1089 1 4.3837E-01 7.452866 1.460891 -33.636524 -4.263988 -4.112925 72.457435 0.998580 0.000610 0.001420 0.015449 3 6.7169E+02 -0.354070 6.458029 -28.705014 -99.000000 -9.611696 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7667280305535655 rel_E_err 1.7110865181335454D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9668630924222484E-002 920 7.471151 4.554E+04 -99.000000 -27.935071 72.455241 0.000000 0.000000 0.000074 0.998580 -8.554422 1092 1 4.2756E-01 7.471151 1.434853 -32.483574 -4.103745 -4.113207 72.455241 0.998580 0.000610 0.001420 0.015449 3 7.0015E+02 -0.299217 6.457850 -27.935084 -99.000000 -9.543342 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7717419329212163 rel_E_err 1.6914457263405108D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9657704785752053E-002 930 7.489352 4.688E+04 -99.000000 -27.178683 72.452966 0.000000 0.000000 0.000074 0.998580 -8.491950 1093 1 4.3848E-01 7.489352 1.409499 -31.332726 -3.947278 -4.113366 72.452966 0.998580 0.000610 0.001420 0.015449 3 7.2968E+02 -0.244614 6.457752 -27.178714 -99.000000 -9.476233 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7648662074228572 rel_E_err 1.7184377026506803D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9646082530419732E-002 940 7.508575 4.831E+04 -99.000000 -26.390459 72.450458 0.000000 0.000000 0.000074 0.998580 -8.425979 1097 1 6.1157E-01 7.508575 1.383368 -30.126885 -3.785234 -4.113425 72.450458 0.998580 0.000610 0.001420 0.015449 3 7.6224E+02 -0.186940 6.457711 -26.390539 -99.000000 -9.484590 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7884301487811207 rel_E_err 1.6276830884935953D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9632962078271637E-002 950 7.527225 4.973E+04 -99.000000 -25.636003 72.447919 0.000000 0.000000 0.000074 0.998580 -8.361986 1101 1 5.1208E-01 7.527225 1.358349 -28.973136 -3.630933 -4.113393 72.447919 0.998580 0.000610 0.001420 0.015449 3 7.9522E+02 -0.130983 6.457744 -25.636203 -99.000000 -9.425468 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7663656745188803 rel_E_err 1.7125147685100692D-12 save photos/x950 for model 950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9619368729703692E-002 960 7.545508 5.114E+04 -99.000000 -24.905961 72.445322 0.000000 0.000000 0.000074 0.998580 -8.299263 1103 1 5.0107E-01 7.545508 1.334082 -27.864345 -3.481883 -4.113276 72.445322 0.998580 0.000610 0.001420 0.015449 3 8.2893E+02 -0.076122 6.457827 -24.906439 -99.000000 -9.367903 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7627958348064041 rel_E_err 1.7266494124622451D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9605192635172992E-002 970 7.563706 5.256E+04 -99.000000 -24.188392 72.442626 0.000000 0.000000 0.000074 0.998580 -8.236842 1107 1 5.1183E-01 7.563706 1.310357 -26.786711 -3.335155 -4.113101 72.442626 0.998580 0.000610 0.001420 0.015449 3 8.6391E+02 -0.021513 6.457946 -24.189488 -99.000000 -9.310793 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7769690025573652 rel_E_err 1.6712098914054711D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9590225367177119E-002 980 7.582928 5.408E+04 -99.000000 -23.439833 72.439655 0.000000 0.000000 0.000074 0.998580 -8.170930 1107 1 6.8479E-01 7.582928 1.285583 -25.678374 -3.181441 -4.112880 72.439655 0.998580 0.000610 0.001420 0.015450 3 9.0245E+02 0.036168 6.458095 -23.442348 -99.000000 -9.250403 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7640132179783574 rel_E_err 1.7218161698181766D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9573470328834498E-002 990 7.601576 5.559E+04 -99.000000 -22.721896 72.436645 0.000000 0.000000 0.000074 0.998580 -8.107001 1106 1 5.8516E-01 7.601576 1.261808 -24.632483 -3.033140 -4.112615 72.436645 0.998580 0.000610 0.001420 0.015450 3 9.4147E+02 0.092130 6.458277 -22.727265 -99.000000 -9.192175 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7710039196964154 rel_E_err 1.6943225083814354D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9556261411585876E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1000 7.619857 5.709E+04 -99.000000 -22.024656 72.433566 0.000000 0.000000 0.000074 0.998580 -8.044346 1107 1 5.7404E-01 7.619857 1.238747 -23.634684 -2.888245 -4.112305 72.433566 0.998580 0.000610 0.001420 0.015450 3 9.8136E+02 0.146994 6.458485 -22.035449 -99.000000 -9.135143 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7439119603822757 rel_E_err 1.8033832833424622D-12 save LOGS/profile11.data for model 1000 save photos/1000 for model 1000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9538459646109688E-002 1010 7.638054 5.861E+04 -99.000000 -21.335077 72.430370 0.000000 0.000000 0.000074 0.998580 -7.981997 1117 1 5.8470E-01 7.638054 1.216006 -22.667754 -2.744306 -4.111953 72.430370 0.998580 0.000610 0.001420 0.015450 3 1.0227E+03 0.201608 6.458722 -21.355750 -99.000000 -9.078087 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7106472758590954 rel_E_err 1.9469407008008467D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9519804130336196E-002 1020 7.657274 6.025E+04 -99.000000 -20.608346 72.426846 0.000000 0.000000 0.000074 0.998580 -7.916164 1119 1 7.5758E-01 7.657274 1.192231 -21.673974 -2.592482 -4.111560 72.426846 0.998580 0.000610 0.001420 0.015451 3 1.0683E+03 0.259293 6.458989 -20.647388 -99.000000 -9.017429 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5883438810923725 rel_E_err 2.5802163263383350D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9499062538761395E-002 1030 7.675921 6.187E+04 -99.000000 -19.900757 72.423276 0.000000 0.000000 0.000074 0.998580 -7.852314 1121 1 6.5780E-01 7.675921 1.169385 -20.735859 -2.445375 -4.111119 72.423276 0.998580 0.000610 0.001420 0.015451 3 1.1144E+03 0.315261 6.459285 -19.969392 -99.000000 -8.958656 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7554364614083617 rel_E_err 1.7561578065852038D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9477889001020273E-002 1040 7.694202 6.348E+04 -99.000000 -19.200378 72.419624 0.000000 0.000000 0.000074 0.998580 -7.789739 1123 1 6.4651E-01 7.694202 1.147230 -19.840156 -2.301380 -4.110641 72.419624 0.998580 0.000610 0.001420 0.015451 3 1.1616E+03 0.370132 6.459605 -19.313439 -99.000000 -8.902391 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7519360106500947 rel_E_err 1.7703697870204034D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9456097630166897E-002 1050 7.712397 6.511E+04 -99.000000 -13.742362 72.415833 0.000000 0.000000 0.000074 0.998580 -7.727471 1125 1 6.5700E-01 7.712397 1.125340 -18.971297 -2.158313 -4.110115 72.415833 0.998580 0.000610 0.001420 0.015452 3 1.2105E+03 0.424752 6.459959 -13.742365 -99.000000 -8.847569 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7374203483053385 rel_E_err 1.8305418056881489D-12 save photos/x050 for model 1050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9433362181694670E-002 1060 7.731616 6.686E+04 -99.000000 -12.343049 72.411653 0.000000 0.000000 0.000074 0.998580 -7.661728 1124 1 8.2975E-01 7.731616 1.102516 -18.077289 -2.007506 -4.109518 72.411653 0.998580 0.000610 0.001420 0.015452 3 1.2643E+03 0.482445 6.460371 -12.343049 -99.000000 -8.790421 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7530726476969303 rel_E_err 1.7657424269946127D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9408189306544193E-002 1070 7.750261 6.858E+04 -99.000000 -11.614105 72.407417 0.000000 0.000000 0.000074 0.998580 -7.597971 1125 1 7.2978E-01 7.750261 1.080660 -17.232322 -1.861446 -4.108812 72.407417 0.998580 0.000610 0.001420 0.015453 3 1.3187E+03 0.538419 6.460841 -11.614106 -99.000000 -8.735990 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7821581095126984 rel_E_err 1.6513604934763371D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9382594420231680E-002 1080 7.768541 7.029E+04 -99.000000 -11.109382 72.403083 0.000000 0.000000 0.000074 0.998580 -7.535492 1126 1 7.1832E-01 7.768541 1.059509 -16.424467 -1.718391 -4.108026 72.403083 0.998580 0.000610 0.001420 0.015453 3 1.3744E+03 0.593296 6.461369 -11.109384 -99.000000 -8.684207 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7486479111052997 rel_E_err 1.7838243539093709D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9356350088581478E-002 1090 7.786736 7.203E+04 -99.000000 -10.705758 72.398583 0.000000 0.000000 0.000074 0.998580 -7.473326 1130 1 7.2860E-01 7.786736 1.038574 -15.639379 -1.575996 -4.107151 72.398583 0.998580 0.000610 0.001420 0.015454 3 1.4320E+03 0.647924 6.461956 -10.705763 -99.000000 -8.633809 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7759505201231924 rel_E_err 1.6751337158641400D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9329058109236499E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1100 7.805956 7.390E+04 -27.738377 -10.247641 72.393619 0.000000 0.000000 0.000074 0.998580 -7.407694 1130 1 9.0116E-01 7.805956 1.016697 -14.828441 -1.425473 -4.106187 72.393619 0.998580 0.000610 0.001420 0.015454 3 1.4955E+03 0.705628 6.462622 -10.247652 -99.000000 -8.581592 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7757237980363296 rel_E_err 1.6760084425276403D-12 save LOGS/profile12.data for model 1100 save photos/x100 for model 1100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9298924907386925E-002 1110 7.824602 7.574E+04 -30.266281 -9.753548 72.388587 0.000000 0.000000 0.000074 0.998580 -7.344048 1129 1 8.0089E-01 7.824602 0.995638 -14.053721 -1.279282 -4.105126 72.388587 0.998580 0.000610 0.001420 0.015455 3 1.5596E+03 0.761614 6.463320 -9.753570 -99.000000 -8.531531 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7608459398109719 rel_E_err 1.7344191507557399D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9268359074447725E-002 1120 7.842882 7.759E+04 -29.564641 -9.251491 72.383438 0.000000 0.000000 0.000074 0.998580 -7.281685 1129 1 7.8917E-01 7.842882 0.975112 -13.290609 -1.135875 -4.104042 72.383438 0.998580 0.000610 0.001420 0.015455 3 1.6251E+03 0.816500 6.464042 -9.251531 -99.000000 -8.483552 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7565173269110925 rel_E_err 1.7517925420952690D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9237078609790869E-002 1130 7.861077 7.947E+04 -28.579841 -8.749819 72.378091 0.000000 0.000000 0.000074 0.998580 -7.219642 1131 1 7.9925E-01 7.861077 0.954690 -12.495912 -0.993192 -4.102916 72.378091 0.998580 0.000610 0.001420 0.015456 3 1.6930E+03 0.871136 6.464794 -8.749897 -99.000000 -8.437321 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7682824697948032 rel_E_err 1.7049730954834577D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9204605102617582E-002 1140 7.880296 8.150E+04 -28.021232 -8.223986 72.372192 0.000000 0.000000 0.000074 0.998580 -7.154146 1131 1 9.7167E-01 7.880296 0.933196 -11.574990 -0.842781 -4.101722 72.372192 0.998580 0.000610 0.001420 0.015456 3 1.7676E+03 0.928847 6.465617 -8.224180 -99.000000 -8.389818 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7647232766501748 rel_E_err 1.7190033512162467D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9168807888501707E-002 1150 7.898942 8.351E+04 -27.489553 -7.719563 72.366212 0.000000 0.000000 0.000074 0.998580 -7.090642 1131 1 8.7123E-01 7.898942 0.912375 -10.594883 -0.697366 -4.100431 72.366212 0.998580 0.000610 0.001420 0.015457 3 1.8431E+03 0.984838 6.466464 -7.720142 -99.000000 -8.344961 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7161053768212504 rel_E_err 1.9226251682733579D-12 save photos/x150 for model 1150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9132551844582666E-002 1160 7.917221 8.556E+04 -24.726621 -7.230357 72.360091 0.000000 0.000000 0.000074 0.998580 -7.028425 1132 1 8.5935E-01 7.917221 0.891800 -9.589379 -0.555414 -4.099122 72.360091 0.998580 0.000610 0.001420 0.015458 3 1.9201E+03 1.039731 6.467336 -7.232261 -99.000000 -8.302279 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7555240852281937 rel_E_err 1.7558035176428947D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9095496096588838E-002 1170 7.935416 8.768E+04 -26.008668 -6.746546 72.353734 0.000000 0.000000 0.000074 0.998580 -6.966534 1132 1 8.6927E-01 7.935416 0.871019 -8.589910 -0.414669 -4.097769 72.353734 0.998580 0.000610 0.001420 0.015458 3 1.9998E+03 1.094373 6.468239 -6.752820 -99.000000 -8.260044 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7581590572055852 rel_E_err 1.7451828752858508D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9057068879185465E-002 1180 7.954635 9.003E+04 -21.493341 -6.231963 72.346720 0.000000 0.000000 0.000074 0.998580 -6.901205 1132 1 1.0416E+00 7.954635 0.848465 -7.558657 -0.266382 -4.096348 72.346720 0.998580 0.000610 0.001420 0.015459 3 2.0875E+03 1.152091 6.469219 -6.252930 -99.000000 -8.215633 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7557062286718228 rel_E_err 1.7550672866801434D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9014747748754093E-002 1190 7.973280 9.244E+04 -20.778200 -5.712134 72.339607 0.000000 0.000000 0.000074 0.998580 -6.837870 1136 1 9.4093E-01 7.973280 0.825999 -6.590732 -0.122524 -4.094833 72.339607 0.998580 0.000610 0.001420 0.015460 3 2.1762E+03 1.208089 6.470210 -5.773740 -99.000000 -8.176070 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7604470319338787 rel_E_err 1.7360129801437323D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8971920564863493E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1200 7.991558 9.493E+04 -23.134847 -5.152681 72.332328 0.000000 0.000000 0.000074 0.998580 -6.775827 1135 1 9.2888E-01 7.991558 0.803419 -5.675511 0.018893 -4.093328 72.332328 0.998580 0.000610 0.001420 0.015461 3 2.2665E+03 1.262988 6.471209 -5.307604 -99.000000 -8.139147 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7601358092916310 rel_E_err 1.7372574817540203D-12 save LOGS/profile13.data for model 1200 save photos/x200 for model 1200 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8928179781352355E-002 1210 8.009752 9.749E+04 -19.879179 -4.518123 72.324766 0.000000 0.000000 0.000074 0.998580 -6.714115 1134 1 9.3865E-01 8.009752 0.780809 -4.797735 0.160116 -4.091805 72.324766 0.998580 0.000610 0.001420 0.015461 3 2.3601E+03 1.317636 6.472224 -4.841682 -99.000000 -8.105682 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7683459954238021 rel_E_err 1.7047237219090061D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8882847480070742E-002 1220 8.028970 1.002E+05 -18.321081 -3.767414 72.316423 0.000000 0.000000 0.000074 0.998580 -6.648981 1134 1 1.1108E+00 8.028970 0.757214 -3.905737 0.308866 -4.090240 72.316423 0.998580 0.000610 0.001420 0.015462 3 2.4630E+03 1.375361 6.473302 -4.331631 -99.000000 -8.075522 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.4979606131486189 rel_E_err 3.1771621994339094D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8832946049457380E-002 1230 8.047613 1.029E+05 -18.689540 -2.997085 72.307964 0.000000 0.000000 0.000074 0.998580 -6.585843 1134 1 1.0100E+00 8.047613 0.734832 -3.073747 0.452770 -4.088600 72.307964 0.998580 0.000610 0.001420 0.015463 3 2.5669E+03 1.431367 6.474372 -3.788057 -99.000000 -8.041817 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7723187613127926 rel_E_err 1.6892006454061625D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8782470642048737E-002 1240 8.065889 1.056E+05 -18.300281 -2.235791 72.299307 0.000000 0.000000 0.000074 0.998580 -6.523997 1133 1 9.9776E-01 8.065889 0.713438 -2.288839 0.593727 -4.086993 72.299307 0.998580 0.000610 0.001420 0.015464 3 2.6728E+03 1.486272 6.475439 -3.175166 -99.000000 -8.001636 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7318664615115509 rel_E_err 1.8541016418685319D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8730938600603952E-002 1250 8.084007 1.082E+05 -18.351212 -1.491305 72.290336 0.000000 0.000000 0.000074 0.998580 -6.462305 1137 1 1.0091E+00 8.084007 0.692706 -1.537645 0.733871 -4.085372 72.290336 0.998580 0.000610 0.001420 0.015467 3 2.7822E+03 1.540896 6.476520 -2.486098 -99.000000 -7.954681 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7070072031117434 rel_E_err 1.9633277132489488D-12 save photos/x250 for model 1250 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8677587162492890E-002 1260 8.103299 1.094E+05 -17.327041 -0.722631 72.280382 0.000000 0.000000 0.000074 0.998580 -6.397619 1147 1 1.1798E+00 8.103299 0.683401 -0.770372 0.882964 -4.083939 72.280382 0.998580 0.000610 0.001420 0.015466 3 2.9031E+03 1.598652 6.477515 -1.705175 -99.000000 -8.223434 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7602178213606621 rel_E_err 1.7369294494286575D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8618620429296060E-002 1270 8.121940 1.123E+05 -17.145965 -0.003823 72.270331 0.000000 0.000000 0.000074 0.998580 -6.334699 1151 1 1.0783E+00 8.121940 0.661613 -0.057083 1.027220 -4.082138 72.270331 0.998580 0.000610 0.001420 0.015467 5 3.0248E+03 1.654671 6.478691 -0.941568 -99.000000 -8.189860 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7654173100536461 rel_E_err 1.7162584557183445D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8559214415588715E-002 1280 8.140211 1.152E+05 -17.173666 0.677058 72.260047 0.000000 0.000000 0.000074 0.998580 -6.273082 1160 1 1.0659E+00 8.140211 0.640024 0.616111 1.168643 -4.080275 72.260047 0.998580 0.000610 0.001420 0.015468 3 3.1488E+03 1.709585 6.479933 -0.205887 -99.000000 -8.144830 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7558736992313850 rel_E_err 1.7543906365045535D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8498602136625867E-002 1290 8.158398 1.163E+05 -16.425110 1.331803 72.249367 0.000000 0.000000 0.000074 0.998580 -6.211811 1168 1 1.0752E+00 8.158398 0.632140 1.261702 1.309299 -4.078710 72.249367 0.998580 0.000610 0.001420 0.015469 3 3.2770E+03 1.764249 6.480978 0.505162 -99.000000 -8.423308 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7491806583704772 rel_E_err 1.7816374854537860D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8435840145347528E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1300 8.177608 1.192E+05 -14.881448 1.999198 72.237591 0.000000 0.000000 0.000074 0.998580 -6.147157 1168 1 1.2470E+00 8.177608 0.611200 1.918210 1.457598 -4.076721 72.237591 0.998580 0.000610 0.001420 0.015471 3 3.4178E+03 1.821996 6.482357 1.229970 -99.000000 -8.403310 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6042787328914319 rel_E_err 2.4872604667121975D-12 save LOGS/profile14.data for model 1300 save photos/x300 for model 1300 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8366811552113623E-002 1310 8.196244 1.224E+05 -14.750420 2.623663 72.225651 0.000000 0.000000 0.000074 0.998580 -6.084503 1179 1 1.1456E+00 8.196244 0.588664 2.531160 1.601105 -4.074490 72.225651 0.998580 0.000610 0.001420 0.015472 3 3.5598E+03 1.878022 6.483816 1.906605 -99.000000 -8.363114 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7297649395817860 rel_E_err 1.8630952578187621D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8297061373642829E-002 1320 8.214510 1.254E+05 -14.936630 3.214564 72.213430 0.000000 0.000000 0.000074 0.998580 -6.023157 1180 1 1.1329E+00 8.214510 0.568722 3.110053 1.741405 -4.072268 72.213430 0.998580 0.000610 0.001420 0.015474 3 3.7045E+03 1.932945 6.485295 2.544734 -99.000000 -8.316547 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7608727930464703 rel_E_err 1.7343119117094773D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8225932360320039E-002 1330 8.232687 1.266E+05 -13.256105 3.782362 72.200739 0.000000 0.000000 0.000074 0.998580 -5.962179 1189 1 1.1423E+00 8.232687 0.561319 3.665452 1.880692 -4.070464 72.200739 0.998579 0.000610 0.001420 0.015475 3 3.8541E+03 1.987605 6.486498 3.155288 -99.000000 -8.634664 0.000000 0.000253 0.000133 0.001421 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7339888313590617 rel_E_err 1.8450628675827210D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8152335099145781E-002 retry: check_lgL_nuc_change hard limit 1334 1340 8.245846 1.287E+05 -14.780086 4.181017 72.191191 0.000000 0.000000 0.000073 0.998580 -5.918074 1189 2 9.1898E-01 8.245846 0.547506 4.055173 1.981364 -4.068673 72.191191 0.998577 0.000610 0.001420 0.015477 3 3.9661E+03 2.027183 6.487637 3.581661 -99.000000 -8.618797 0.000000 0.000254 0.000133 0.001423 0.000E+00 Lnuc log_rel_run_E_err -11.7723182346312232 rel_E_err 1.6892026939502357D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8097234123783835E-002 1350 8.255077 1.305E+05 -14.354459 4.454285 72.184290 0.000000 0.000000 0.000073 0.998580 -5.887156 1200 2 8.9964E-01 8.255077 0.535536 4.322524 2.051909 -4.067353 72.184290 0.998575 0.000610 0.001420 0.015478 3 4.0468E+03 2.054949 6.488514 3.872069 -99.000000 -8.597714 0.000000 0.000256 0.000134 0.001425 0.000E+00 Lnuc log_rel_run_E_err -11.7736274036105844 rel_E_err 1.6841183053044434D-12 save photos/x350 for model 1350 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8057643889552722E-002 1360 8.264036 1.320E+05 -12.816506 4.714132 72.177405 0.000000 0.000000 0.000072 0.998580 -5.857166 1200 2 9.7385E-01 8.264036 0.525966 4.577376 2.120333 -4.066127 72.177405 0.998570 0.000610 0.001420 0.015479 3 4.1271E+03 2.081899 6.489345 4.145711 -99.000000 -8.578290 0.000000 0.000261 0.000135 0.001430 0.000E+00 max increase log_rel_run_E_err -11.7886320374723432 rel_E_err 1.6269266099887817D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8018463096100072E-002 1370 8.275170 1.339E+05 -12.820626 5.028492 72.168532 0.000000 0.000000 0.000069 0.998580 -5.819930 1201 2 9.9209E-01 8.275170 0.514125 4.887847 2.205311 -4.064561 72.168532 0.998559 0.000610 0.001420 0.015480 3 4.2302E+03 2.115390 6.490392 4.470405 -99.000000 -8.549768 0.000000 0.000271 0.000139 0.001441 0.000E+00 Lnuc log_rel_run_E_err -11.7727880090506325 rel_E_err 1.6873764787530859D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7968709475526438E-002 1380 8.285028 1.356E+05 -12.645907 5.296738 72.160273 0.000000 0.000000 0.000065 0.998580 -5.786986 1201 2 9.7532E-01 8.285028 0.503721 5.157123 2.280514 -4.063128 72.160273 0.998538 0.000610 0.001420 0.015482 3 4.3259E+03 2.145046 6.491340 4.735948 -99.000000 -8.520605 0.000000 0.000290 0.000145 0.001462 0.000E+00 Lnuc log_rel_run_E_err -11.7828414026703836 rel_E_err 1.6487643837202853D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7923627134082778E-002 1390 8.296456 1.376E+05 -11.269555 5.590204 72.149950 0.000000 0.000000 0.000055 0.998580 -5.748836 1199 2 1.0900E+00 8.296456 0.491702 5.462785 2.367644 -4.061490 72.149950 0.998488 0.000610 0.001420 0.015484 3 4.4450E+03 2.179422 6.492450 4.995502 -99.000000 -8.482193 0.000000 0.000335 0.000160 0.001512 0.000E+00 Lnuc log_rel_run_E_err -11.7935848993441645 rel_E_err 1.6084779090803310D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7870081530664010E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1400 8.308446 1.378E+05 -10.550428 5.868055 72.137591 0.000000 0.000000 0.000035 0.998580 -5.708863 1207 2 1.2129E+00 8.308446 0.490795 5.776127 2.459006 -4.060581 72.137591 0.998370 0.000610 0.001420 0.015489 3 4.5871E+03 2.215483 6.493066 5.148562 -99.000000 -8.844485 0.000000 0.000445 0.000187 0.001630 0.000E+00 Lnuc log_rel_run_E_err -12.0757886319178986 rel_E_err 8.3986864525200496D-13 save LOGS/profile15.data for model 1400 save photos/x400 for model 1400 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7812214058223378E-002 1410 8.321603 1.405E+05 -9.589923 6.140325 72.120090 0.000000 0.000000 0.000010 0.998580 -5.665084 1216 2 1.3373E+00 8.321603 0.474554 6.111331 2.559186 -4.058665 72.120090 0.998032 0.000610 0.001420 0.015499 3 4.7878E+03 2.255039 6.494331 4.950427 -99.000000 -8.812412 0.000000 0.000772 0.000224 0.001968 0.000E+00 Lnuc log_rel_run_E_err -11.4406073572231257 rel_E_err -3.6257064801314071D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7745968773449841E-002 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.004_x0.03.bin 1420 8.333517 1.429E+05 -8.598830 6.407601 72.087628 0.000000 0.000000 0.000000 0.998580 -5.625565 1214 2 1.7639E+00 8.333517 0.460381 6.406280 2.649840 -4.057380 72.087628 0.996768 0.000611 0.001420 0.015534 3 5.1586E+03 2.290827 6.495068 3.890069 -99.000000 -8.772964 0.000000 0.002031 0.000237 0.003232 0.000E+00 max increase log_rel_run_E_err -11.7065208243770336 rel_E_err 1.9655277314623392D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7679287950217803E-002 num_steps_to_relax_rotation 100 1430 8.337121 1.444E+05 -7.773126 6.489839 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613676 1213 2 0.0000E+00 8.337121 0.450296 6.488802 2.677102 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3103E+03 2.301626 6.494014 3.867460 -99.000000 -8.731318 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8678765347209509 rel_E_err 5.4378160691380865D-12 relax to omega: wanted-current, current, wanted 1430 1.9004414443116405D-05 3.8784142167269194D-07 1.9392255864789097D-05 1440 8.337128 1.444E+05 -7.773049 6.490029 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613652 1213 2 0.0000E+00 8.337128 0.450260 6.488992 2.677162 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3203E+03 2.301649 6.494007 3.867622 -99.000000 -8.731127 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8677637880904214 rel_E_err 1.8985341905682726D-12 relax to omega: wanted-current, current, wanted 1440 1.7069973915338626D-05 2.3276762756649397D-06 1.9397650191003567D-05 1450 8.337135 1.444E+05 -7.772984 6.490191 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613632 1213 2 0.0000E+00 8.337135 0.450224 6.489153 2.677214 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3303E+03 2.301668 6.493996 3.867760 -99.000000 -8.730910 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8677110416268006 rel_E_err -4.4932116709585278D-12 relax to omega: wanted-current, current, wanted 1450 1.5135531471845588D-05 4.2688626421977794D-06 1.9404394114043368D-05 1460 8.337141 1.445E+05 -7.772929 6.490325 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613615 1213 2 0.0000E+00 8.337141 0.450189 6.489288 2.677257 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3403E+03 2.301684 6.493982 3.867875 -99.000000 -8.730683 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8674386250962458 rel_E_err -1.2385728298536362D-11 relax to omega: wanted-current, current, wanted 1460 1.3200522200408414D-05 6.2117332282416051D-06 1.9412255428650019D-05 1470 8.337145 1.445E+05 -7.772885 6.490434 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613602 1213 2 0.0000E+00 8.337145 0.450154 6.489396 2.677292 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3503E+03 2.301697 6.493967 3.867968 -99.000000 -8.730452 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8669057100119444 rel_E_err -2.0571264172786287D-11 relax to omega: wanted-current, current, wanted 1470 1.1264559090887896D-05 8.1565871416106021D-06 1.9421146232498498D-05 1480 8.337148 1.445E+05 -7.772851 6.490518 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613591 1213 2 0.0000E+00 8.337148 0.450121 6.489480 2.677319 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3603E+03 2.301707 6.493949 3.868040 -99.000000 -8.730219 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8661259383162285 rel_E_err -2.7821331328802856D-11 relax to omega: wanted-current, current, wanted 1480 9.3273103071549942D-06 1.0103709236201150D-05 1.9431019543356145D-05 1490 8.337151 1.445E+05 -7.772826 6.490578 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613583 1213 2 0.0000E+00 8.337151 0.450090 6.489541 2.677338 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3703E+03 2.301714 6.493931 3.868091 -99.000000 -8.729987 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8651474844170828 rel_E_err -3.3103900024959099D-11 relax to omega: wanted-current, current, wanted 1490 7.3884701193052243D-06 1.2053377019409122D-05 1.9441847138714347D-05 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1500 8.337152 1.445E+05 -7.772810 6.490617 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613578 1213 2 0.0000E+00 8.337152 0.450060 6.489580 2.677351 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3803E+03 2.301719 6.493911 3.868124 -99.000000 -8.729758 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8640500358907941 rel_E_err -3.5589216203658151D-11 relax to omega: wanted-current, current, wanted 1500 5.4477471418196265D-06 1.4005864062279040D-05 1.9453611204098667D-05 1510 8.337153 1.445E+05 -7.772803 6.490634 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613576 1213 2 0.0000E+00 8.337153 0.450032 6.489597 2.677356 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.3903E+03 2.301721 6.493890 3.868139 -99.000000 -8.729532 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8629420577659754 rel_E_err -3.4205667401786119D-11 relax to omega: wanted-current, current, wanted 1510 3.5048581400564669D-06 1.5961442166974884D-05 1.9466300307031351D-05 1520 8.337153 1.445E+05 -7.772804 6.490630 72.009003 0.000000 0.000000 0.000000 0.998580 -5.613576 1213 2 0.0000E+00 8.337153 0.450006 6.489593 2.677355 -99.000000 72.009003 0.992459 0.000620 0.001420 0.015651 2 6.4003E+03 2.301721 6.493868 3.868136 -99.000000 -8.729311 0.000000 0.006332 0.000238 0.007541 0.000E+00 max_dt log_rel_run_E_err -6.8619572991587265 rel_E_err -2.8266654419814980D-11 relax to omega: wanted-current, current, wanted 1520 1.5595256400052430D-06 1.7920381577342183D-05 1.9479907217347427D-05 final step: wanted-current, current, wanted 1528 1.3148965276347450D-09 1.9490135814561591D-05 1.9491450711089226D-05 finished doing relax uniform omega 1430 8.337118 1.448E+05 -7.175330 6.484319 71.926766 0.000000 0.000000 0.000000 0.998580 -5.613333 1213 2 2.5557E+00 8.337118 0.445943 6.482754 2.676657 -4.045378 71.926766 0.988008 0.000638 0.001420 0.015775 3 6.9675E+03 2.301771 6.489828 4.040157 -99.000000 -8.688419 0.000000 0.010764 0.000238 0.011992 0.000E+00 max increase log_rel_run_E_err -11.3892669162405138 rel_E_err 4.0806851141867623D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7615094367757351E-002 1440 8.339589 1.446E+05 -10.286936 6.478160 70.932688 0.000000 0.000000 0.000000 0.998580 -5.599241 1188 2 3.3476E+00 8.339589 0.444058 6.468649 2.689126 -4.055068 70.932688 0.934120 0.001640 0.001420 0.017350 5 1.8167E+04 2.311754 6.483894 4.813839 -99.000000 -8.693645 0.000000 0.063651 0.000238 0.065880 0.000E+00 max increase log_rel_run_E_err -11.7670344112448877 rel_E_err 1.7098798277031661D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7309130938833809E-002 1450 8.345416 1.439E+05 -9.827336 6.468352 68.889419 0.000000 0.000000 0.000000 0.998580 -5.567740 1226 2 3.4061E+00 8.345416 0.443167 6.438573 2.720178 -4.078256 68.889419 0.820997 0.008837 0.001420 0.021138 5 4.2083E+04 2.334549 6.473717 5.289676 -99.000000 -8.733206 0.000000 0.169576 0.000238 0.179003 0.000E+00 XHe_cntr log_rel_run_E_err -11.7410343308563085 rel_E_err 1.8153721524443242D-12 save photos/x450 for model 1450 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.6619136172644545E-002 1460 8.351952 1.435E+05 -10.869571 6.458739 66.923170 0.000000 0.000000 0.000000 0.998580 -5.534392 1235 2 3.3600E+00 8.351952 0.440959 6.402865 2.756863 -4.096418 66.923170 0.710174 0.024126 0.001420 0.025652 5 6.6188E+04 2.359260 6.463858 5.540528 -99.000000 -8.768964 0.000000 0.265111 0.000238 0.289826 0.000E+00 XHe_cntr log_rel_run_E_err -11.7235089764423215 rel_E_err 1.8901271637027038D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.5885404801128621E-002 1470 8.359436 1.435E+05 -10.172247 6.448898 64.963901 0.000000 0.000000 0.000000 0.998580 -5.497771 1241 2 3.3627E+00 8.359436 0.435760 6.358192 2.800506 -4.108264 64.963901 0.600711 0.050100 0.001420 0.031188 5 9.0914E+04 2.386886 6.453948 5.724188 -99.000000 -8.796126 0.000000 0.348599 0.000238 0.399289 0.000E+00 XHe_cntr log_rel_run_E_err -11.6915780279218744 rel_E_err 2.0343326627453021D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.5118702324056752E-002 1480 8.368805 1.429E+05 -9.420972 6.438106 62.880940 0.000000 0.000000 0.000000 0.851222 -5.453729 1249 2 3.5393E+00 8.368805 0.433974 6.295589 2.857097 -4.125566 62.880940 0.485777 0.093932 0.148778 0.038670 5 1.1826E+05 2.420700 6.443246 5.884876 -99.000000 -8.659381 0.000000 0.419700 0.000239 0.514223 0.000E+00 XHe_cntr log_rel_run_E_err -11.6599934312759217 rel_E_err 2.1877947141953028D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.4270542788548468E-002 1490 8.379579 1.428E+05 -10.390550 6.427623 60.885518 0.000000 0.000000 0.000000 0.728832 -5.405116 1266 2 3.4213E+00 8.379579 0.429310 6.213377 2.924386 -4.146272 60.885518 0.378752 0.157209 0.271168 0.047990 5 1.4562E+05 2.458717 6.432796 6.018023 -99.000000 -8.589049 0.000000 0.463444 0.000243 0.621248 0.000E+00 XHe_cntr log_rel_run_E_err -11.6781287503581837 rel_E_err 2.0983177269541275D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.3439089231162348E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1500 8.394447 1.427E+05 -10.267648 6.415216 58.641263 0.000000 0.000000 0.000000 0.592839 -5.340596 1261 2 3.4638E+00 8.394447 0.423796 6.080109 3.020174 -4.165540 58.641263 0.266054 0.261199 0.407161 0.061946 5 1.7776E+05 2.510096 6.420574 6.145784 -99.000000 -8.529148 0.000000 0.472132 0.000262 0.733946 0.000E+00 adjust_J_q log_rel_run_E_err -11.6775745550884285 rel_E_err 2.1009970611074777D-12 save LOGS/profile16.data for model 1500 save photos/x500 for model 1500 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.2515840092237989E-002 1510 8.409435 1.433E+05 -11.228676 6.404854 56.851521 0.000000 0.000000 0.000000 0.491270 -5.278093 1261 2 3.3538E+00 8.409435 0.415402 5.923325 3.119585 -4.179130 56.851521 0.184337 0.374402 0.508730 0.076761 5 2.0438E+05 2.560825 6.410582 6.230950 -99.000000 -8.491707 0.000000 0.440576 0.000332 0.815663 0.000E+00 XO_cntr log_rel_run_E_err -11.6913468405820424 rel_E_err 2.0354158843349932D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.1805116833108830E-002 1520 8.423604 1.438E+05 -11.092554 6.396922 55.522230 0.000000 0.000000 0.000000 0.418493 -5.221202 1262 2 3.2798E+00 8.423604 0.408922 5.756374 3.215822 -4.191556 55.522230 0.129205 0.478389 0.581507 0.090699 5 2.2478E+05 2.607863 6.403133 6.284090 -99.000000 -8.456626 0.000000 0.391516 0.000535 0.870795 0.000E+00 XO_cntr log_rel_run_E_err -11.6626382527441841 rel_E_err 2.1745116925834574D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.1290640665943903E-002 1530 8.439210 1.448E+05 -12.314991 6.389791 54.388784 0.000000 0.000000 0.000000 0.353304 -5.160850 1264 2 3.2227E+00 8.439210 0.399667 5.550626 3.324031 -4.199585 54.388784 0.086463 0.580598 0.646696 0.105131 5 2.4261E+05 2.658707 6.396869 6.321847 -99.000000 -8.425228 49.119111 0.331423 0.001153 0.913537 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6756401138306813 rel_E_err 2.1103762279083254D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0853559737237514E-002 1540 8.455948 1.461E+05 -12.795340 6.383812 53.482057 0.000000 0.000000 0.000000 0.304538 -5.098407 1278 2 3.1045E+00 8.455948 0.389219 5.295223 3.442151 -4.206717 53.482057 0.055128 0.669846 0.695462 0.118821 5 2.5708E+05 2.712295 6.392257 6.346868 -99.000000 -8.396927 49.136655 0.271757 0.002861 0.944872 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6465063170400942 rel_E_err 2.2568031688775436D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0489565283705982E-002 1550 8.473074 1.475E+05 -10.394158 6.378927 52.812780 0.000000 0.000000 0.000000 0.271716 -5.036640 1285 2 2.9738E+00 8.473074 0.379721 4.967357 3.564746 -4.212115 52.812780 0.033311 0.737202 0.728284 0.130596 4 2.6793E+05 2.766257 6.389446 6.361757 -99.000000 -8.374468 49.136655 0.222048 0.006838 0.966689 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6086354943856520 rel_E_err 2.4624334702815255D-12 save photos/x550 for model 1550 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0184997938027415E-002 1560 8.490640 1.494E+05 -7.864674 6.374057 52.330481 0.000000 0.000000 0.000000 0.248969 -4.975088 1299 2 2.8246E+00 8.490640 0.368149 4.493015 3.691830 -4.214608 52.330481 0.018015 0.780735 0.751031 0.140319 3 2.7581E+05 2.820880 6.388192 6.368308 -99.000000 -8.349247 49.136655 0.185454 0.014514 0.981985 0.000E+00 lgRho_cntr log_rel_run_E_err -11.1507435923338463 rel_E_err -7.0673468760458055D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9915605723683108E-002 set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 change to "co_burn.net" number of species 9 new net = co_burn.net 1570 8.506195 1.514E+05 -8.549552 6.366656 52.050062 0.000000 0.000000 0.000000 0.235860 -4.921930 1303 2 2.0162E+00 8.506195 0.356791 3.876847 3.805308 -4.214538 52.050062 0.009051 0.798680 0.764140 0.146703 3 2.8040E+05 2.868715 6.388286 6.365248 -61.591876 -8.322692 49.136655 0.166030 0.023683 0.000000 0.000E+00 max increase log_rel_run_E_err -10.2776117924686083 rel_E_err -5.2770135280972694D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9703686739034657E-002 1580 8.520825 1.533E+05 -7.723219 6.350825 51.897272 0.000000 0.000000 0.000000 0.226429 -4.872965 1313 2 2.4276E+00 8.520825 0.345960 3.101421 3.912751 -4.212896 51.897272 0.004098 0.803078 0.773571 0.150483 3 2.8290E+05 2.913304 6.389340 6.350580 -58.520013 -8.295066 49.119182 0.157354 0.031511 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -12.1939497758908200 rel_E_err 6.3980882207810677D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9527227576952437E-002 stop because have dropped below central lower limit for he4 0.9841738363E-03 0.1000000000E-02 1590 8.542183 1.566E+05 -10.806790 6.272308 51.797927 0.000000 0.000000 0.000000 0.220741 -4.802673 1312 2 1.9869E+00 8.542183 0.328919 1.606264 4.070262 -4.209302 51.797927 0.000984 0.801904 0.779259 0.152980 4 2.8452E+05 2.977959 6.391857 6.272298 -54.302856 -8.245535 49.119182 0.153467 0.038326 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.4325507787292970 rel_E_err -3.6935945545973329D-12 save LOGS/profile17.data for model 1590 solver retries 1 Lnuc retries 1 varcontrol dt limit 85 max increase dt limit 656 max decrease dt limit 1 Lnuc dt limit 78 lgRho_cntr dt limit 1140 XHe_cntr dt limit 40 XO_cntr dt limit 25 adjust_J_q dt limit 13 model saved to he_dep.mod save photos/x590 for model 1590 termination code: xa_central_lower_limit runtime (minutes), retries, steps 10.00 2 1590 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1590 8.542183 1.566E+05 -10.806790 6.272308 51.797927 0.000000 0.000000 0.000000 0.220741 -4.802673 1312 2 1.9869E+00 8.542183 0.328919 1.606264 4.070262 -4.209302 51.797927 0.000984 0.801904 0.779259 0.152980 4 2.8452E+05 2.977959 6.391857 6.272298 -54.302856 -8.245535 49.119182 0.153467 0.038326 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.4325507787292970 rel_E_err -3.6935945545973329D-12 DATE: 2026-11-20 TIME: 14:23:29 finished inlist_to_he_dep_header run inlist_pulses_header DATE: 2026-11-20 TIME: 14:23:30 reading user weak rate file /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number c1f8e3ab9 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9298625775278618E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 1.6398298417154462D+00 retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 1.3387998460514650D+00 retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 1.0377698503874837D+00 retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 7.3673985472350267D-01 retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 4.3570985905952148D-01 retry: logRho > hydro_mtx_max_allowed_logRho 2 1591 1st model retry log10(dt/yr) 1.3467986339554031D-01 save LOGS/profile18.data for model 1591 1600 8.543053 1.568E+05 -12.201516 6.266642 51.797927 0.000000 0.000000 0.000000 0.220741 -4.799848 1314 6 8.4731E-01 8.543053 0.329501 1.534698 4.076703 -99.000000 51.797927 0.000921 0.801831 0.779259 0.153031 3 2.8456E+05 2.980579 6.395124 6.266634 -54.136786 -7.095882 49.119182 0.153408 0.038489 0.000000 0.173E-08 max increase log_rel_run_E_err -11.6510882119131978 rel_E_err 2.2331185959047359D-12 save LOGS/profile19.data for model 1600 save photos/x600 for model 1600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9288780042213848E-002 1610 8.549441 1.575E+05 -12.087270 6.214993 51.797927 0.000000 0.000000 0.000000 0.220741 -4.779129 1312 6 1.6391E+00 8.549441 0.326217 0.973847 4.123951 -99.000000 51.797927 0.000552 0.801322 0.779259 0.153333 4 2.8478E+05 2.999804 6.396761 6.214991 -52.930425 -7.082340 49.119182 0.153094 0.039486 0.000000 -0.392E-07 max increase log_rel_run_E_err -11.3746706681978278 rel_E_err 4.2201640327804346D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9218115009310712E-002 1620 8.570174 1.607E+05 -14.783229 5.788054 51.797927 0.000000 0.000000 0.000000 0.220741 -4.711947 1304 6 1.4452E+00 8.570174 0.310600 -1.671105 4.277120 -99.000000 51.797927 0.000056 0.800360 0.779259 0.153760 4 2.8519E+05 3.062238 6.400346 5.788054 -49.151490 -7.012768 49.119182 0.152779 0.040985 0.000000 -0.985E-07 lgRho_cntr log_rel_run_E_err -11.6128881277901019 rel_E_err 2.4384388678238148D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8998505301842687E-002 1630 8.583565 1.629E+05 -15.553493 4.853241 51.797927 0.000000 0.000000 0.000000 0.220741 -4.668590 1299 6 9.9041E-01 8.583565 0.300169 -5.371227 4.375875 -99.000000 51.797927 0.000003 0.800222 0.779259 0.153825 3 2.8536E+05 3.102600 6.402479 4.853241 -46.811532 -6.966037 49.119182 0.152758 0.041167 0.000000 -0.120E-06 lg_XHe_cntr log_rel_run_E_err -11.4970872458693556 rel_E_err 3.1835579092284965D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8857926861570609E-002 1640 8.593837 1.645E+05 -19.035434 3.120913 51.797927 0.000000 0.000000 0.000000 0.220741 -4.635348 1303 6 1.3270E+00 8.593837 0.292438 -6.947090 4.451555 -99.000000 51.797927 0.000000 0.800215 0.779259 0.153847 4 2.8548E+05 3.133581 6.404148 3.120913 -45.065342 -6.931571 49.119182 0.152758 0.041177 0.000000 -0.117E-06 max increase log_rel_run_E_err -11.6188839117266642 rel_E_err 2.4050055796080612D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8748448113288469E-002 retry: logT < hydro_mtx_min_allowed_logT 80 1649 1650 8.610919 1.675E+05 -25.612403 -0.549215 51.782783 0.000000 0.000000 0.000000 0.219945 -4.580016 1369 7 1.2296E+00 8.610919 0.275813 -6.299519 4.577288 -4.120652 51.782783 0.000000 0.800215 0.780055 0.153889 5 2.8568E+05 3.185181 6.402346 -0.549216 -42.249907 -7.347612 49.119182 0.152758 0.041177 0.000000 -0.211E-06 max increase log_rel_run_E_err -11.5892544451713189 rel_E_err 2.5748121797745734D-12 save photos/x650 for model 1650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8568018434072158E-002 retry: logT < hydro_mtx_min_allowed_logT 96 1652 retry: logT < hydro_mtx_min_allowed_logT 60 1656 retry: logT < hydro_mtx_min_allowed_logT 4 1656 retry: logT < hydro_mtx_min_allowed_logT 18 1656 retry: logT < hydro_mtx_min_allowed_logT 16 1656 retry: logT < hydro_mtx_min_allowed_logT 16 1656 retry: logT < hydro_mtx_min_allowed_logT 4 1656 retry: logT < hydro_mtx_min_allowed_logT 18 1656 retry: logT < hydro_mtx_min_allowed_logT 18 1656 retry: logT < hydro_mtx_min_allowed_logT 6 1656 retry: logT < hydro_mtx_min_allowed_logT 4 1656 retry: logT < hydro_mtx_min_allowed_logT 8 1656 retry: logT < hydro_mtx_min_allowed_logT 18 1656 hydro_solver_step returned ierr -1 s% model_number 1656 nz 1414 s% num_retries 20 retry: logT < hydro_mtx_min_allowed_logT 8 1656 hydro_solver_step returned ierr -1 s% model_number 1656 nz 1414 s% num_retries 21 retry: logT < hydro_mtx_min_allowed_logT 6 1656 retry: logT < hydro_mtx_min_allowed_logT 4 1656 retry: logT < hydro_mtx_min_allowed_logT 2 1656 retry: logT < hydro_mtx_min_allowed_logT 6 1656 retry: logT < hydro_mtx_min_allowed_logT 2 1656 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin e00(i,j,k) equ_w_div_wc lnd 6 1 1 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 1 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 1 NaN em1(i,j,k) equ_w_div_wc lnd 6 1 3 NaN e00(i,j,k) equ_w_div_wc lnd 6 1 3 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 1 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 3 NaN em1(i,j,k) equ_w_div_wc lnT 6 2 3 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 1 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 3 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 1 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 3 NaN e00(i,j,k) equ_w_div_wc L 6 4 1 NaN em1(i,j,k) equ_w_div_wc lnR 6 3 3 NaN ep1(i,j,k) equ_w_div_wc L 6 4 1 NaN e00(i,j,k) equ_w_div_wc v 6 5 1 NaN ep1(i,j,k) equ_w_div_wc v 6 5 1 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 1 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 1 NaN em1(i,j,k) equ_w_div_wc lnd 6 1 2 NaN e00(i,j,k) equ_w_div_wc lnd 6 1 2 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 2 NaN em1(i,j,k) equ_w_div_wc lnT 6 2 2 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 2 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 2 NaN em1(i,j,k) equ_w_div_wc lnR 6 3 2 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 2 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 2 NaN em1(i,j,k) equ_w_div_wc L 6 4 2 NaN e00(i,j,k) equ_w_div_wc L 6 4 2 NaN ep1(i,j,k) equ_w_div_wc L 6 4 2 NaN em1(i,j,k) equ_w_div_wc v 6 5 2 NaN e00(i,j,k) equ_w_div_wc v 6 5 2 NaN ep1(i,j,k) equ_w_div_wc v 6 5 2 NaN em1(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 3 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 3 NaN em1(i,j,k) equ_w_div_wc L 6 4 3 NaN e00(i,j,k) equ_w_div_wc L 6 4 3 NaN ep1(i,j,k) equ_w_div_wc L 6 4 3 NaN em1(i,j,k) equ_w_div_wc v 6 5 3 NaN e00(i,j,k) equ_w_div_wc v 6 5 3 NaN ep1(i,j,k) equ_w_div_wc v 6 5 3 NaN em1(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN retry: error in do1_w_div_wc_eqn 1656 retry: logRho > hydro_mtx_max_allowed_logRho 1 1656 1660 8.618087 1.680E+05 -23.148300 -0.422882 51.776867 0.000000 0.000000 0.000000 0.219665 -4.556800 1424 28 -4.3002E+00 8.618087 0.273906 -6.034993 4.629966 -4.190419 51.776867 0.000000 0.800215 0.780335 0.153909 5 2.8577E+05 3.206853 6.403663 -0.422884 -41.102517 -8.154368 49.119182 0.152758 0.041177 0.000000 0.399E-06 max increase log_rel_run_E_err -8.5851521621293330 rel_E_err 2.5992487145824631D-09 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8490485858852336E-002 1670 8.618087 1.680E+05 -23.180230 -0.419923 51.776867 0.000000 0.000000 0.000000 0.219665 -4.556797 1432 28 -3.5084E+00 8.618087 0.273902 -6.035135 4.629966 -4.190528 51.776867 0.000000 0.800215 0.780335 0.153909 2 2.8577E+05 3.206854 6.403658 -0.419925 -41.102502 -8.154336 49.119182 0.152758 0.041177 0.000000 -0.553E-06 max increase log_rel_run_E_err -11.2072132267166769 rel_E_err 6.2056427932856431D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8490486137024433E-002 1680 8.618088 1.680E+05 -23.292420 -0.418933 51.776867 0.000000 0.000000 0.000000 0.219665 -4.556794 1437 28 -2.7166E+00 8.618088 0.273902 -6.035125 4.629972 -4.190659 51.776867 0.000000 0.800215 0.780335 0.153909 2 2.8577E+05 3.206857 6.403658 -0.418934 -41.102376 -8.154338 49.119182 0.152758 0.041177 0.000000 0.520E-07 max increase log_rel_run_E_err -11.5776911334561863 rel_E_err 2.6442886843832144D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8490477667141423E-002 1690 8.618093 1.680E+05 -23.834279 -0.418837 51.776863 0.000000 0.000000 0.000000 0.219664 -4.556778 1434 28 -1.9248E+00 8.618093 0.273903 -6.034943 4.630009 -4.191075 51.776863 0.000000 0.800215 0.780336 0.153909 2 2.8577E+05 3.206872 6.403663 -0.418838 -41.101585 -8.154359 49.119182 0.152758 0.041177 0.000000 -0.803E-08 max increase log_rel_run_E_err -11.5877450649430642 rel_E_err 2.5837764473008419D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8490423256687620E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.618123 1.680E+05 -24.380336 -0.418239 51.776839 0.000000 0.000000 0.000000 0.219663 -4.556679 1434 28 -1.1330E+00 8.618123 0.273884 -6.033816 4.630235 -4.191139 51.776839 0.000000 0.800215 0.780337 0.153909 2 2.8577E+05 3.206965 6.403671 -0.418241 -41.096695 -8.154322 49.119182 0.152758 0.041177 0.000000 -0.271E-07 max increase log_rel_run_E_err -11.5590671455784619 rel_E_err 2.7601510806651535D-12 save LOGS/profile20.data for model 1700 save photos/x700 for model 1700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8490086963797224E-002 1710 8.618314 1.680E+05 -24.363693 -0.413184 51.776691 0.000000 0.000000 0.000000 0.219657 -4.556063 1435 28 -3.4117E-01 8.618314 0.273751 -6.026844 4.631637 -4.190949 51.776691 0.000000 0.800215 0.780343 0.153909 3 2.8577E+05 3.207540 6.403701 -0.413185 -41.066432 -8.153971 49.119182 0.152758 0.041177 0.000000 -0.279E-07 max increase log_rel_run_E_err -11.5833055800315883 rel_E_err 2.6103240213835195D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8488004565498281E-002 1720 8.619491 1.682E+05 -24.674738 -0.390308 51.775776 0.000000 0.000000 0.000000 0.219604 -4.552257 1441 28 4.5064E-01 8.619491 0.272912 -5.983731 4.640311 -4.190674 51.775776 0.000000 0.800215 0.780396 0.153912 3 2.8578E+05 3.211097 6.403885 -0.390309 -40.879529 -8.151735 49.119182 0.152758 0.041177 0.000000 -0.282E-07 max increase log_rel_run_E_err -11.5653376567510069 rel_E_err 2.7205852757004753D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8475106825781392E-002 1730 8.626736 1.693E+05 -25.793797 -0.249842 51.770093 0.000000 0.000000 0.000000 0.219423 -4.528854 1479 28 1.2425E+00 8.626736 0.267695 -5.720439 4.693734 -4.188830 51.770093 0.000000 0.800215 0.780577 0.153931 4 2.8587E+05 3.232991 6.404991 -0.249844 -39.740066 -8.137467 49.119182 0.152758 0.041177 0.000000 -0.278E-07 max increase log_rel_run_E_err -11.5542841317848666 rel_E_err 2.7907174515340167D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8395083934529251E-002 1740 8.645096 1.721E+05 -22.642501 0.103123 51.755330 0.000000 0.000000 0.000000 0.218861 -4.469657 1504 28 1.4699E+00 8.645096 0.254928 -5.069626 4.829682 -4.184289 51.755330 0.000000 0.800215 0.781139 0.153980 4 2.8610E+05 3.288486 6.407847 0.103120 -36.934073 -8.101518 49.119182 0.152758 0.041177 0.000000 -0.251E-07 lgRho_cntr log_rel_run_E_err -11.5392795605373326 rel_E_err 2.8888197160212316D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8187269183548785E-002 1750 8.663545 1.748E+05 -21.852334 0.452954 51.740006 0.000000 0.000000 0.000000 0.218277 -4.410157 1524 28 1.3994E+00 8.663545 0.242889 -4.440588 4.967952 -4.179572 51.740006 0.000000 0.800215 0.781723 0.154041 4 2.8633E+05 3.344345 6.410806 0.452949 -34.228838 -8.066510 49.119182 0.152758 0.041177 0.000000 -0.226E-07 lgRho_cntr log_rel_run_E_err -11.5224972153598380 rel_E_err 3.0026366733183308D-12 save photos/x750 for model 1750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7971083657984664E-002 1760 8.681802 1.774E+05 -22.531717 0.794332 51.724395 0.000000 0.000000 0.000000 0.217635 -4.351138 1539 28 1.3663E+00 8.681802 0.231714 -3.841948 5.108415 -4.174697 51.724395 0.000000 0.800215 0.782365 0.154119 4 2.8656E+05 3.399774 6.413795 0.794322 -31.659728 -8.033028 49.119182 0.152758 0.041177 0.000000 -0.204E-07 lgRho_cntr log_rel_run_E_err -11.5353052696949359 rel_E_err 2.9153770475413348D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7749709289047072E-002 1770 8.699652 1.798E+05 -22.088453 1.124488 51.708716 0.000000 0.000000 0.000000 0.217029 -4.292192 1559 28 1.4086E+00 8.699652 0.221435 -3.277307 5.253201 -4.169618 51.708716 0.000000 0.800215 0.782971 0.154269 4 2.8680E+05 3.454595 6.416765 1.124471 -29.241717 -8.001421 49.119245 0.152758 0.041177 0.000000 -0.188E-07 lgRho_cntr log_rel_run_E_err -11.3008743357659025 rel_E_err 5.0017924220053675D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7525213964798294E-002 1780 8.716212 1.820E+05 -21.534843 1.425912 51.693982 0.000000 0.000000 0.000000 0.216506 -4.237779 1607 28 1.3275E+00 8.716212 0.212507 -2.774406 5.398230 -4.164811 51.693982 0.000000 0.800215 0.783494 0.154404 3 2.8701E+05 3.505418 6.419518 1.425884 -27.088505 -7.973406 49.119245 0.152758 0.041177 0.000000 -0.173E-07 lgRho_cntr log_rel_run_E_err -11.4964298348989118 rel_E_err 3.1883806524224378D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7310893973780056E-002 1790 8.732424 1.840E+05 -25.074696 1.717521 51.679495 0.000000 0.000000 0.000000 0.216001 -4.183417 1614 28 1.3181E+00 8.732424 0.204296 -2.299618 5.556580 -4.159927 51.679495 0.000000 0.800215 0.783999 0.154603 5 2.8722E+05 3.555725 6.422210 1.717480 -25.055967 -7.947305 49.119244 0.152758 0.041177 0.000000 -0.163E-07 lgRho_cntr log_rel_run_E_err -11.5286150246343269 rel_E_err 2.9606357253053271D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7094663826161433E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.748451 1.859E+05 -24.816293 2.002431 51.665364 0.000000 0.000000 0.000000 0.215540 -4.127620 1625 28 1.2961E+00 8.748451 0.196624 -1.847005 5.735143 -4.155030 51.665364 0.000000 0.800215 0.784460 0.154913 5 2.8743E+05 3.606426 6.424843 2.002370 -23.117224 -7.922602 49.119234 0.152757 0.041177 0.000000 -0.159E-07 lgRho_cntr log_rel_run_E_err -11.5316227472904576 rel_E_err 2.9402025689678433D-12 save LOGS/profile21.data for model 1800 save photos/x800 for model 1800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6874347406382098E-002 1810 8.764165 1.877E+05 -20.217762 2.277732 51.652103 0.000000 0.000000 0.000000 0.215150 -4.069327 1639 28 1.2537E+00 8.764165 0.189431 -1.419450 5.935446 -4.150191 51.652103 0.000000 0.800214 0.784850 0.155413 3 2.8762E+05 3.657761 6.427366 2.277644 -21.281930 -7.899022 49.119234 0.152757 0.041178 0.000000 -0.164E-07 lgRho_cntr log_rel_run_E_err -11.5400006730809128 rel_E_err 2.8840270333828354D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6651675759064676E-002 1820 8.779397 1.894E+05 -24.209297 2.539343 51.640358 0.000000 0.000000 0.000000 0.214823 -4.007274 1649 28 1.1821E+00 8.779397 0.182585 -1.020408 6.153534 -4.145576 51.640358 0.000000 0.800214 0.785177 0.156195 5 2.8778E+05 3.709992 6.429718 2.539224 -19.562193 -7.875875 49.119176 0.152757 0.041178 0.000000 -0.185E-07 lgRho_cntr log_rel_run_E_err -11.5287460494535416 rel_E_err 2.9597426486803937D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6429093015768676E-002 1830 8.793998 1.911E+05 -23.060811 2.786379 51.630704 0.000000 0.000000 0.000000 0.214567 -3.940542 1662 28 1.0766E+00 8.793998 0.175862 -0.652116 6.381222 -4.141428 51.630704 0.000000 0.800213 0.785433 0.157333 5 2.8791E+05 3.763259 6.431838 2.786221 -17.966129 -7.852027 49.119099 0.152756 0.041180 0.000000 -0.234E-07 lgRho_cntr log_rel_run_E_err -11.5218151039356140 rel_E_err 3.0073563787813614D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6208978428828137E-002 1840 8.807920 1.929E+05 -18.744582 3.028657 51.623361 0.000000 0.000000 0.000000 0.214384 -3.869115 1669 28 9.3959E-01 8.807920 0.169050 -0.313637 6.610315 -4.137778 51.623361 0.000000 0.800211 0.785616 0.158844 3 2.8802E+05 3.817475 6.433699 3.028460 -16.490527 -7.826491 49.119099 0.152753 0.041185 0.000000 -0.329E-07 lgRho_cntr log_rel_run_E_err -11.5220655346875258 rel_E_err 3.0056227223586445D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5992381615768053E-002 1850 8.821237 1.946E+05 -21.940330 3.285678 51.618121 0.000000 0.000000 0.000000 0.214256 -3.793841 1685 28 7.7922E-01 8.821237 0.161981 -0.000779 6.835814 -4.134604 51.618121 0.000000 0.800207 0.785744 0.160680 5 2.8809E+05 3.872385 6.435313 3.285453 -15.120157 -7.798604 49.119099 0.152747 0.041195 0.000000 -0.496E-07 lgRho_cntr log_rel_run_E_err -11.5251421335273854 rel_E_err 2.9844057390531953D-12 save photos/x850 for model 1850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5778351783303958E-002 retry: eos evaluated at too low a density 1851 1860 8.832970 1.960E+05 -21.804271 3.546484 51.614823 0.000000 0.000000 0.000000 0.214179 -3.722886 1696 29 6.2350E-01 8.832970 0.156318 0.266754 7.036684 -4.134213 51.614823 0.000000 0.800201 0.785821 0.162570 4 2.8813E+05 3.922805 6.436400 3.546256 -13.945294 -8.109952 49.119099 0.152736 0.041212 0.000000 -0.512E-07 lgRho_cntr log_rel_run_E_err -11.5251029819800301 rel_E_err 2.9846747946695621D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5583470405457224E-002 1870 8.845560 1.979E+05 -22.884817 3.866410 51.612362 0.000000 0.000000 0.000000 0.214122 -3.643379 1723 29 4.3814E-01 8.845560 0.148605 0.546185 7.252221 -4.131986 51.612362 0.000000 0.800187 0.785878 0.164813 5 2.8817E+05 3.978398 6.437662 3.866202 -12.718026 -8.082930 49.119099 0.152716 0.041246 0.000000 -0.814E-07 lgRho_cntr log_rel_run_E_err -11.5380274212931297 rel_E_err 2.8971606556057341D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5366722754408707E-002 1880 8.857958 1.999E+05 -20.513462 4.216679 51.610747 0.000000 0.000000 0.000000 0.214083 -3.563078 1726 29 2.5240E-01 8.857958 0.140522 0.814264 7.462846 -4.130148 51.610747 0.000000 0.800163 0.785917 0.167171 4 2.8819E+05 4.034049 6.438795 4.216507 -11.542522 -8.053830 49.119099 0.152679 0.041306 0.000000 -0.130E-06 lgRho_cntr log_rel_run_E_err -11.5275373330036803 rel_E_err 2.9679915967633609D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5144169795456546E-002 1890 8.870274 2.019E+05 -17.154472 4.589401 51.609691 0.000000 0.000000 0.000000 0.214059 -3.482481 1734 29 6.5616E-02 8.870274 0.132130 1.074142 7.669389 -4.128501 51.609691 0.000000 0.800122 0.785941 0.169603 3 2.8820E+05 4.089725 6.439828 4.589268 -10.406519 -8.023112 49.119099 0.152616 0.041410 0.000000 -0.207E-06 lgRho_cntr log_rel_run_E_err -11.5364022270043733 rel_E_err 2.9080225707438939D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4912301328014236E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 8.882572 2.041E+05 -21.838436 4.976866 51.609001 0.000000 0.000000 0.000000 0.214043 -3.401988 1752 29 -1.2015E-01 8.882572 0.123458 1.327788 7.872332 -4.127306 51.609001 0.000000 0.800050 0.785957 0.172081 5 2.8821E+05 4.145361 6.440789 4.976769 -9.302146 -7.990930 49.119099 0.152507 0.041589 0.000000 -0.325E-06 lgRho_cntr log_rel_run_E_err -11.5311386533125937 rel_E_err 2.9434817446973018D-12 save LOGS/profile22.data for model 1900 save photos/x900 for model 1900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4667670266849681E-002 1910 8.894919 2.063E+05 -21.250606 5.373265 51.608550 0.000000 0.000000 0.000000 0.214032 -3.321805 1756 29 -3.0539E-01 8.894919 0.114526 1.576515 8.072002 -4.125959 51.608550 0.000000 0.799928 0.785968 0.174588 5 2.8822E+05 4.200983 6.441689 5.373196 -8.224280 -7.957286 49.119099 0.152321 0.041894 0.000000 -0.510E-06 lgRho_cntr log_rel_run_E_err -11.5352144445392391 rel_E_err 2.9159868118263880D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4406496499887663E-002 1920 8.907334 2.086E+05 -18.937008 5.774543 51.608254 0.000000 0.000000 0.000000 0.214025 -3.242181 1773 29 -4.8794E-01 8.907334 0.105386 1.821032 8.268494 -4.125119 51.608254 0.000000 0.799721 0.785975 0.177117 5 2.8822E+05 4.256513 6.442549 5.774495 -7.169670 -7.922348 49.119099 0.152005 0.042413 0.000000 -0.788E-06 lgRho_cntr log_rel_run_E_err -11.5399760777612084 rel_E_err 2.8841903685816474D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4124644430650353E-002 1930 8.919848 2.109E+05 -19.899917 6.178450 51.608058 0.000000 0.000000 0.000000 0.214021 -3.163244 1775 29 -6.6779E-01 8.919848 0.096055 2.062021 8.462020 -4.123894 51.608058 0.000000 0.799367 0.785979 0.179672 5 2.8822E+05 4.311954 6.443372 6.178417 -6.134705 -7.886086 49.119099 0.151466 0.043298 0.000001 -0.122E-05 lgRho_cntr log_rel_run_E_err -11.5330079523415616 rel_E_err 2.9308395783221123D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3817020783182857E-002 retry: logT < hydro_mtx_min_allowed_logT 48 1938 1940 8.931030 2.129E+05 -19.010754 6.537073 51.607941 0.000000 0.000000 0.000000 0.214018 -3.094062 1788 30 -9.5206E-01 8.931030 0.088180 2.272788 8.631017 -4.124152 51.607941 0.000000 0.798853 0.785982 0.181970 5 2.8823E+05 4.360941 6.443851 6.537050 -5.232256 -8.106646 49.119099 0.150683 0.044585 0.000001 -0.130E-05 max increase log_rel_run_E_err -11.5412100236089188 rel_E_err 2.8760072492386057D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3518333061102414E-002 1950 8.943311 2.153E+05 -17.898783 6.926664 51.607852 0.000000 0.000000 0.000000 0.214016 -3.019874 1799 30 -9.9202E-01 8.943311 0.078934 2.499403 8.812232 -4.122691 51.607852 0.000000 0.797933 0.785984 0.184531 5 2.8823E+05 4.414004 6.444608 6.926648 -4.263335 -8.075002 49.119099 0.149283 0.046884 0.000002 -0.197E-05 lgRho_cntr log_rel_run_E_err -11.5427071817940075 rel_E_err 2.8661097610984544D-12 save photos/x950 for model 1950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3159845747529409E-002 1960 8.956297 2.178E+05 -16.732236 7.332085 51.607790 0.000000 0.000000 0.000000 0.214015 -2.943928 1808 30 -1.1599E+00 8.956297 0.069153 2.733509 8.998775 -4.121628 51.607790 0.000000 0.796312 0.785985 0.187332 5 2.8823E+05 4.469075 6.445394 7.332074 -3.261110 -8.040879 49.119099 0.146812 0.050940 0.000003 -0.293E-05 lgRho_cntr log_rel_run_E_err -11.4866816687712188 rel_E_err 3.2607562188421773D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2740257724798225E-002 1970 8.969579 2.190E+05 -15.620677 7.737014 51.607785 0.000000 0.000000 0.000000 0.214015 -2.869653 1821 30 -1.3233E+00 8.969579 0.067202 2.966968 9.184009 -99.000000 51.607785 0.000000 0.793549 0.785985 0.190386 5 2.8823E+05 4.523979 6.450996 7.737006 -2.255658 -8.056760 49.119099 0.142590 0.057853 0.000007 -0.367E-05 lgRho_cntr log_rel_run_E_err -11.5347481588741960 rel_E_err 2.9191192785925813D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2261202258057282E-002 1980 8.983263 2.215E+05 -14.499269 8.141113 51.607785 0.000000 0.000000 0.000000 0.214015 -2.797710 1834 30 -1.4780E+00 8.983263 0.057832 3.201508 9.369227 -99.000000 51.607785 0.000000 0.788878 0.785985 0.193897 5 2.8823E+05 4.578624 6.452080 8.141108 -1.233429 -8.024069 49.119099 0.135428 0.069539 0.000013 -0.578E-05 lgRho_cntr log_rel_run_E_err -11.5237090413108465 rel_E_err 2.9942699973450769D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1705842888951648E-002 1990 8.997544 2.242E+05 -13.395034 8.541276 51.607785 0.000000 0.000000 0.000000 0.214015 -2.728937 1835 30 -1.6255E+00 8.997544 0.047794 3.438936 9.555721 -99.000000 51.607785 0.000000 0.781196 0.785985 0.198179 5 2.8823E+05 4.632993 6.453072 8.541273 -0.181549 -7.987601 49.119099 0.123576 0.088759 0.000024 -0.851E-05 lgRho_cntr log_rel_run_E_err -11.5319059977428449 rel_E_err 2.9382855697484123D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1052320672083177E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 9.005614 2.258E+05 -16.478666 8.755546 51.607785 0.000000 0.000000 0.000000 0.214015 -2.692981 1849 30 -1.8122E+00 9.005614 0.042142 3.569931 9.658240 -99.000000 51.607785 0.000000 0.775387 0.785985 0.200970 4 2.8823E+05 4.662492 6.453613 8.755544 0.406232 -7.966670 49.119099 0.114550 0.103294 0.000035 -0.104E-04 max increase log_rel_run_E_err -11.3455854187651024 rel_E_err 4.5124726350664673D-12 save LOGS/profile23.data for model 2000 save photos/2000 for model 2000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0645486565655101E-002 2010 9.020502 2.286E+05 -13.951719 9.120912 51.607785 0.000000 0.000000 0.000000 0.214015 -2.631558 1838 30 -1.8347E+00 9.020502 0.031655 3.806925 9.842521 -99.000000 51.607785 0.000000 0.761681 0.785985 0.207022 4 2.8823E+05 4.714844 6.454574 9.120910 1.477028 -7.927223 49.119099 0.093013 0.137586 0.000064 -0.146E-04 lgRho_cntr log_rel_run_E_err -11.5443195277871293 rel_E_err 2.8554888731749000D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9813874460695113E-002 2020 9.036058 2.317E+05 -15.623295 9.459335 51.607785 0.000000 0.000000 0.000000 0.214015 -2.568251 1805 30 -1.9745E+00 9.036058 0.020499 4.052576 10.032074 -99.000000 51.607785 0.000000 0.745079 0.785985 0.214491 5 2.8823E+05 4.769207 6.455561 9.459334 2.576254 -7.884692 49.119099 0.066410 0.179130 0.000114 -0.203E-04 lgRho_cntr log_rel_run_E_err -11.5137078947769709 rel_E_err 3.0640235942662418D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.8801178047359670E-002 2030 9.050743 2.348E+05 -14.452510 9.738811 51.607785 0.000000 0.000000 0.000000 0.214015 -2.500829 1752 30 -2.1271E+00 9.050743 0.009659 4.287427 10.211880 -99.000000 51.607785 0.000000 0.730589 0.785985 0.222061 5 2.8823E+05 4.823823 6.456521 9.738810 3.589957 -7.843164 49.119099 0.042642 0.215394 0.000175 -0.276E-04 lgRho_cntr log_rel_run_E_err -11.5410443169077634 rel_E_err 2.8771048100514653D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.7665377292341519E-002 2040 9.064272 2.377E+05 -15.930369 9.964249 51.607785 0.000000 0.000000 0.000000 0.214015 -2.428207 1719 30 -2.2877E+00 9.064272 -0.000543 4.505201 10.377250 -99.000000 51.607785 0.000000 0.720703 0.785985 0.228732 5 2.8823E+05 4.878650 6.457445 9.964248 4.485110 -7.804071 49.119099 0.026048 0.240139 0.000231 -0.371E-04 lgRho_cntr log_rel_run_E_err -11.4501765542278537 rel_E_err 3.5466917585998837D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6444655172702838E-002 2050 9.076893 2.404E+05 -11.821483 10.153242 51.607785 0.000000 0.000000 0.000000 0.214015 -2.352791 1666 30 -2.4374E+00 9.076893 -0.010185 4.707428 10.529624 -99.000000 51.607785 0.000000 0.714691 0.785985 0.234373 3 2.8823E+05 4.933088 6.458307 10.153240 5.281453 -7.767053 49.119099 0.015749 0.255183 0.000276 -0.496E-04 lgRho_cntr log_rel_run_E_err -11.7160214897620616 rel_E_err -1.9229965728283930D-12 save photos/x050 for model 2050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5149615519563096E-002 2060 9.089152 2.431E+05 -15.863539 10.321180 51.607785 0.000000 0.000000 0.000000 0.214015 -2.275992 1605 30 -2.5843E+00 9.089152 -0.019416 4.899360 10.673165 -99.000000 51.607785 0.000000 0.711130 0.785985 0.239245 5 2.8823E+05 4.987493 6.459168 10.321178 6.013583 -7.731750 49.119099 0.009536 0.264090 0.000309 -0.661E-04 lgRho_cntr log_rel_run_E_err -11.3259414264888250 rel_E_err 4.7212671293262965D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.3763617905144941E-002 2070 9.101246 2.457E+05 -11.739766 10.475963 51.607785 0.000000 0.000000 0.000000 0.214015 -2.199304 1545 30 -2.7214E+00 9.101246 -0.028284 5.083442 10.809881 -99.000000 51.607785 0.000000 0.709026 0.785985 0.243568 3 2.8823E+05 5.041569 6.460049 10.475962 6.700696 -7.698048 49.119099 0.005795 0.269346 0.000335 -0.855E-04 lgRho_cntr log_rel_run_E_err -11.6138658911366921 rel_E_err 2.4329551825183316D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2280939083368647E-002 2080 9.113375 2.484E+05 -11.282091 10.622871 51.607785 0.000000 0.000000 0.000000 0.214015 -2.123059 1497 30 -2.8537E+00 9.113375 -0.037056 5.262294 10.941857 -99.000000 51.607785 0.000000 0.707782 0.785985 0.247516 3 2.8823E+05 5.095526 6.460910 10.622869 7.358298 -7.664755 49.119099 0.003523 0.272442 0.000355 -0.116E-03 lgRho_cntr log_rel_run_E_err -11.1314275822578335 rel_E_err 7.3887745907057745D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.0689731306401388E-002 2090 9.125638 2.509E+05 -11.149640 10.764998 51.607785 0.000000 0.000000 0.000000 0.214015 -2.047485 1463 30 -2.9837E+00 9.125638 -0.045563 5.437546 11.070381 -99.000000 51.607785 0.000000 0.707083 0.785985 0.251191 3 2.8823E+05 5.149445 6.461822 10.764996 7.995569 -7.632801 49.119099 0.002137 0.274168 0.000376 -0.157E-03 lgRho_cntr log_rel_run_E_err -11.0862960596014464 rel_E_err 8.1979249926559067D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.8982942154590356E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.138083 2.535E+05 -10.925474 10.903319 51.607785 0.000000 0.000000 0.000000 0.214015 -1.973034 1425 30 -3.1128E+00 9.138083 -0.054057 5.608902 11.195295 -99.000000 51.607785 0.000000 0.706829 0.785985 0.254632 3 2.8823E+05 5.203218 6.462748 10.903316 8.612609 -7.601044 49.119099 0.001291 0.274779 0.000402 -0.207E-03 lgRho_cntr log_rel_run_E_err -10.9523183126851613 rel_E_err 1.1160449516675704D-11 save LOGS/profile24.data for model 2100 save photos/x100 for model 2100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7172359211034648E-002 2110 9.150603 2.562E+05 -14.434323 11.041995 51.607785 0.000000 0.000000 0.000000 0.214015 -1.899714 1395 30 -3.2294E+00 9.150603 -0.062582 5.780274 11.319585 -99.000000 51.607785 0.000000 0.707222 0.785985 0.257922 4 2.8823E+05 5.256657 6.463695 11.041992 9.225341 -7.569266 49.119108 0.000771 0.273783 0.000455 -0.253E-03 lgRho_cntr log_rel_run_E_err -11.6005111249184001 rel_E_err 2.5089319096636173D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.5223717571264830E-002 2120 9.163629 2.588E+05 -10.251180 11.182920 51.607785 0.000000 0.000000 0.000000 0.214015 -1.827458 1365 30 -3.3591E+00 9.163629 -0.071086 5.952053 11.443446 -99.000000 51.607785 0.000000 0.709210 0.785985 0.261007 3 2.8823E+05 5.310558 6.464679 11.182918 9.831337 -7.537651 49.119108 0.000454 0.268857 0.000604 -0.370E-03 lgRho_cntr log_rel_run_E_err -12.1082574555805635 rel_E_err 7.7936795379800076D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.3139285056151891E-002 retry: check_lgL_power_photo_change hard limit 2124 2130 9.172951 2.608E+05 -10.831822 11.284719 51.607785 0.000000 0.000000 0.000000 0.214015 -1.779105 1354 31 -3.6862E+00 9.172951 -0.077091 6.071836 11.529472 -99.000000 51.607785 0.000000 0.712892 0.785985 0.262966 3 2.8823E+05 5.347712 6.465443 11.284717 10.247283 -7.515446 49.119108 0.000310 0.259810 0.000900 -0.455E-03lgL_power_phot log_rel_run_E_err -12.5113935466976898 rel_E_err 3.0803953086518068D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.1612450890241733E-002 2140 9.180843 2.624E+05 -10.356855 11.372197 51.607785 0.000000 0.000000 0.000000 0.214015 -1.741457 1338 31 -3.7509E+00 9.180843 -0.082176 6.170977 11.600456 -99.000000 51.607785 0.000000 0.718954 0.785985 0.264393 3 2.8823E+05 5.377777 6.466018 11.372194 10.584649 -7.496394 49.119123 0.000222 0.245050 0.001520 -0.531E-03lgL_power_phot log_rel_run_E_err -13.2959623270429983 rel_E_err 5.0586854176227204D-14 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0306887120132570E-002 2150 9.188958 2.639E+05 -10.161928 11.463698 51.607785 0.000000 0.000000 0.000000 0.214015 -1.707177 1322 31 -3.8089E+00 9.188958 -0.087098 6.270441 11.671451 -99.000000 51.607785 0.000000 0.729827 0.785985 0.265562 3 2.8823E+05 5.406808 6.466578 11.463695 10.912388 -7.477899 49.119123 0.000156 0.218946 0.003099 -0.593E-03lgL_power_phot log_rel_run_E_err -11.5252551538444497 rel_E_err -2.9836291816442429D-12 save photos/x150 for model 2150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.8962700450301177E-002 2160 9.197324 2.656E+05 -11.633843 11.559887 51.607785 0.000000 0.000000 0.000000 0.214015 -1.677349 1310 31 -3.8558E+00 9.197324 -0.092097 6.370511 11.742665 -99.000000 51.607785 0.000000 0.747582 0.785985 0.266415 5 2.8823E+05 5.434388 6.467317 11.559884 11.223782 -7.459483 49.119123 0.000105 0.177393 0.007119 -0.680E-03lgL_power_phot log_rel_run_E_err -11.3616533438781833 rel_E_err 4.3485719095691898D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.7579122715447849E-002 2170 9.205955 2.673E+05 -9.170176 11.659522 51.607785 0.000000 0.000000 0.000000 0.214015 -1.650903 1299 31 -3.8851E+00 9.205955 -0.097375 6.472429 11.814982 -99.000000 51.607785 0.000000 0.772287 0.785985 0.267064 3 2.8823E+05 5.460989 6.467997 11.659519 11.510093 -7.439675 49.119123 0.000066 0.122176 0.016224 -0.763E-03lgL_power_phot log_rel_run_E_err -11.6726134560273618 rel_E_err -2.1251350978157108D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.6141909193531902E-002 2180 9.215575 2.693E+05 -9.240186 11.766841 51.607785 0.000000 0.000000 0.000000 0.214015 -1.619928 1281 31 -3.7342E+00 9.215575 -0.103366 6.587534 11.896373 -99.000000 51.607785 0.000000 0.801072 0.785985 0.268007 4 2.8823E+05 5.491275 6.468748 11.766838 11.780866 -7.417029 49.119123 0.000034 0.062979 0.033618 -0.843E-03lgL_power_phot log_rel_run_E_err -11.5918787617393448 rel_E_err 2.5593002450597191D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.4490379132386240E-002 2190 9.228726 2.721E+05 -10.936656 11.908063 51.607785 0.000000 0.000000 0.000000 0.214015 -1.562611 1263 31 -3.7948E+00 9.228726 -0.112027 6.753655 12.013210 -99.000000 51.607785 0.000000 0.827450 0.785985 0.270445 4 2.8823E+05 5.539125 6.469822 11.908060 12.076126 -7.384042 49.119123 0.000009 0.016476 0.059221 -0.109E-02 lgRho_cntr log_rel_run_E_err -11.5746565837806497 rel_E_err 2.6628298470808665D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.2067950467711674E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2199 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.240830 2.739E+05 -10.658778 12.040831 51.607785 0.000000 0.000000 0.000000 0.214015 -1.497829 1637 31 -5.4991E+00 9.240830 -0.120209 6.911704 12.123788 -99.000000 51.607785 0.000000 0.836925 0.785985 0.273453 5 2.8823E+05 5.588382 6.464419 12.040828 12.288848 -7.536234 49.118533 0.000001 0.002764 0.071902 -0.638E-02 lgRho_cntr log_rel_run_E_err -11.5792253656834845 rel_E_err 2.6349636859816583D-12 save LOGS/profile25.data for model 2200 save photos/x200 for model 2200 check gamma integral 9.7356726802915149E-003 2210 9.242073 2.731E+05 -7.733032 12.056866 51.607785 0.000000 0.000000 0.000000 0.214015 -1.491440 2535 31 -4.7073E+00 9.242073 -0.114479 6.928340 12.135286 -99.000000 51.607785 0.000000 0.837349 0.785985 0.273725 5 2.8823E+05 5.593330 6.471057 12.056863 12.310030 -7.864664 49.117869 0.000001 0.002199 0.072532 0.822E-03 max increase log_rel_run_E_err -10.5488456559188499 rel_E_err 2.5773267948069497D-12 check gamma integral 9.4911837415043183E-003 2220 9.250016 2.748E+05 -8.440548 12.135580 51.607785 0.000000 0.000000 0.000000 0.214015 -1.446792 2534 31 -3.9155E+00 9.250016 -0.119229 7.028138 12.204870 -99.000000 51.607785 0.000000 0.838752 0.785985 0.275780 5 2.8823E+05 5.626602 6.472359 12.135577 12.410601 -7.855867 49.117869 0.000000 0.000331 0.074758 -0.960E-03 lgRho_cntr log_rel_run_E_err -10.2642945945411324 rel_E_err 2.6517773267404299D-12 check gamma integral 8.0117529084330411E-003 2230 9.263661 2.778E+05 -8.307935 12.274398 51.607785 0.000000 0.000000 0.000000 0.214015 -1.372593 2536 31 -4.1850E+00 9.263661 -0.128061 7.194442 12.320347 -99.000000 51.607785 0.000000 0.838822 0.785985 0.279078 5 2.8823E+05 5.682732 6.473660 12.274394 12.565373 -7.835112 49.117869 0.000000 0.000013 0.075399 -0.130E-02 lgRho_cntr log_rel_run_E_err -10.0934490935075303 rel_E_err 2.6517353483132546D-12 check gamma integral 5.5578217573634498E-003 2240 9.277142 2.807E+05 -6.566704 12.409911 51.607785 0.000000 0.000000 0.000000 0.214015 -1.303325 2537 31 -4.3126E+00 9.277142 -0.136380 7.352806 12.430132 -99.000000 51.607785 0.000000 0.838388 0.785985 0.282081 5 2.8823E+05 5.736516 6.474987 12.409907 12.704276 -7.816334 49.117869 0.000000 0.000011 0.076017 -0.170E-02 lgRho_cntr log_rel_run_E_err -9.9655547540577150 rel_E_err 2.9436630175656413D-12 check gamma integral 3.2494333410163349E-003 2250 9.291007 2.836E+05 -6.196290 12.547415 51.607785 0.000000 0.000000 0.000000 0.214015 -1.236129 2541 31 -4.4360E+00 9.291007 -0.144643 7.510670 12.539604 -99.000000 51.607785 0.000000 0.837304 0.785985 0.285033 5 2.8823E+05 5.790168 6.476365 12.547411 12.840474 -7.798301 49.117869 0.000000 0.000010 0.077549 -0.219E-02 lgRho_cntr log_rel_run_E_err -9.8716513231084342 rel_E_err 1.7704481383441381D-12 save photos/x250 for model 2250 check gamma integral 9.9664430138652672E-004 reached high velocities 0.39634684228071043 stopping in at least 1495.4106486361920 seconds save LOGS/gamma1_prof001.data for model 2255 2260 9.290403 2.836E+05 -4.272792 12.237726 51.607785 0.000000 0.000000 0.000000 0.214015 -1.216837 2544 31 -4.5515E+00 9.290403 -0.143966 7.483069 12.524870 -99.000000 51.607785 0.000000 0.834817 0.785985 0.287775 7 2.8823E+05 5.797382 6.477739 12.237718 12.432234 -7.818749 49.117869 0.000000 0.000011 0.081037 0.274E-01 lgRho_cntr log_rel_run_E_err -8.8885356050149724 rel_E_err 4.8278350201786465D-10 retry: check_lgL_power_photo_change hard limit 2260 2260 9.304464 2.864E+05 -4.939333 12.675181 51.607785 0.000000 0.000000 0.000000 0.214015 -1.175280 2544 32 -4.8525E+00 9.304464 -0.152370 7.658754 12.642685 -99.000000 51.607785 0.000000 0.834743 0.785985 0.287991 5 2.8823E+05 5.840441 6.477730 12.675177 12.963310 -7.794996 49.117869 0.000000 0.000010 0.081142 -0.199E-02 retry log_rel_run_E_err -9.0879308047641043 rel_E_err 5.6222472387327877D-12 check gamma integral -1.0575237955799759E-003 retry: some xa < min_xa_hard_limit 2264 residual_norm > tol_residual_norm 2266 7.7891820367854206D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2266 1.0708635922706530D+03 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2266 7.2106772189651312D-03 3.0000000000000003D-04 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 2266 1.2646934444908600D+00 2.9999999999999999D-02 1.0000000000000001D-01 retry: avg+max corr+resid -- give up in solver 2266 residual_norm > tol_residual_norm 2266 1.3211524681068516D-05 9.9999999999999995D-07 max_residual > tol_max_residual 2266 1.0907055507842014D-03 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2266 2.5246690606898037D-03 6.0000000000000006D-04 2.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 2266 9.3246541619825235D-02 5.9999999999999998D-02 2.0000000000000001D-01 retry: avg+max corr+resid -- give up in solver 2266 retry: get_T_tau -- L <= 0 2268 retry: check_lgL_power_photo_change hard limit 2269 2270 9.301277 2.847E+05 -4.087959 12.478301 51.607785 0.000000 0.000000 0.000000 0.214015 -1.177382 2544 37 -5.7568E+00 9.301277 -0.148940 7.604843 12.611846 -99.000000 51.607785 0.000000 0.833480 0.785985 0.289032 4 2.8823E+05 5.833828 6.474488 12.478295 12.724413 -7.790554 49.117869 0.000000 0.000010 0.082904 -0.675E-01lgL_power_phot log_rel_run_E_err -9.0337341528983846 rel_E_err 3.2162959879659802D-12 retry: check_lgL_power_photo_change hard limit 2270 2270 9.299925 2.846E+05 -4.128685 12.436534 51.607785 0.000000 0.000000 0.000000 0.214015 -1.181391 2544 38 -6.0578E+00 9.299925 -0.148150 7.587751 12.600578 -99.000000 51.607785 0.000000 0.833490 0.785985 0.289008 3 2.8823E+05 5.829680 6.475298 12.436528 12.673396 -7.796248 49.117869 0.000000 0.000010 0.082889 -0.471E-01 retry log_rel_run_E_err -9.0332476304001244 rel_E_err 4.2381420248402143D-12 check gamma integral -1.9927970727427283E-004 retry: check_lgL_power_photo_change hard limit 2272 retry: check_lgL_power_photo_change hard limit 2275 retry: check_lgL_power_photo_change hard limit 2279 2280 9.309454 2.855E+05 -3.839060 12.734113 51.607785 0.000000 0.000000 0.000000 0.214015 -1.153025 2544 41 -6.6111E+00 9.309454 -0.153452 7.706283 12.679539 -99.000000 51.607785 0.000000 0.833425 0.785985 0.289185 3 2.8823E+05 5.858972 6.469927 12.734109 13.030303 -7.759031 49.117869 0.000000 0.000010 0.082981 -0.183E+00 max increase log_rel_run_E_err -9.0082376467035790 rel_E_err 2.7826467156471591D-12 check gamma integral -1.7476853258947536E-003 retry: check_lgL_power_photo_change hard limit 2285 2290 9.320085 2.861E+05 -3.516931 13.074417 51.607785 0.000000 0.000000 0.000000 0.214015 -1.121452 2544 42 -6.7899E+00 9.320085 -0.158628 7.835316 12.766539 -99.000000 51.607785 0.000000 0.833357 0.785985 0.289379 3 2.8823E+05 5.891645 6.463381 13.074415 13.420447 -7.719387 49.117869 0.000000 0.000010 0.083076 -0.327E+00lgL_power_phot log_rel_run_E_err -8.9911184220308424 rel_E_err 4.9890305670492552D-12 check gamma integral -3.3829302124086273E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.333220 2.864E+05 -3.154308 13.501510 51.607785 0.000000 0.000000 0.000000 0.214015 -1.082395 2550 42 -6.9405E+00 9.333220 -0.164104 7.990098 12.872379 -99.000000 51.607785 0.000000 0.833233 0.785985 0.289644 3 2.8823E+05 5.932072 6.454674 13.501509 13.887134 -7.673571 49.117869 0.000000 0.000010 0.083249 -0.507E+00lgL_power_phot log_rel_run_E_err -8.9607640599851948 rel_E_err 6.9848007674587595D-12 save LOGS/profile26.data for model 2300 save photos/x300 for model 2300 check gamma integral -5.2560511572907354E-003 2310 9.347854 2.865E+05 -2.836462 13.976432 51.607785 0.000000 0.000000 0.000000 0.214015 -1.038885 2552 42 -7.1205E+00 9.347854 -0.169303 8.157388 12.988269 -99.000000 51.607785 0.000000 0.832967 0.785985 0.289993 3 2.8823E+05 5.977174 6.444838 13.976431 14.381885 -7.628024 49.117869 0.000000 0.000009 0.083619 -0.710E+00lgL_power_phot log_rel_run_E_err -8.9438261865998339 rel_E_err 2.9780037421500445D-12 check gamma integral -7.1419831483526229E-003 2320 9.362554 2.864E+05 -2.690025 14.435103 51.607785 0.000000 0.000000 0.000000 0.214015 -0.995446 2553 42 -7.2779E+00 9.362554 -0.173814 8.321249 13.102687 -99.000000 51.607785 0.000000 0.832377 0.785985 0.290435 3 2.8823E+05 6.022438 6.435120 14.435102 14.840355 -7.587763 49.117869 0.000000 0.000009 0.084440 -0.914E+00lgL_power_phot log_rel_run_E_err -8.9328139504034034 rel_E_err 1.7057452832651444D-12 check gamma integral -8.8192182096160816E-003 2330 9.377238 2.862E+05 -2.879943 14.849004 51.607785 0.000000 0.000000 0.000000 0.214015 -0.952911 2555 42 -7.3929E+00 9.377238 -0.177799 8.482711 13.215180 -99.000000 51.607785 0.000000 0.830983 0.785985 0.291061 3 2.8823E+05 6.067365 6.425620 14.849004 15.239019 -7.551945 49.117869 0.000001 0.000010 0.086383 -0.112E+01lgL_power_phot log_rel_run_E_err -8.9252105726713715 rel_E_err 1.7541949277850558D-12 check gamma integral -1.0281168621244782E-002 2340 9.392698 2.858E+05 -3.714921 15.208550 51.607785 0.000000 0.000000 0.000000 0.214015 -0.910569 2556 42 -7.4581E+00 9.392698 -0.181588 8.652852 13.331665 -99.000000 51.607785 0.000000 0.827253 0.785985 0.292205 3 2.8823E+05 6.113684 6.415792 15.208549 15.568757 -7.517846 49.117869 0.000002 0.000010 0.091580 -0.133E+01lgL_power_phot log_rel_run_E_err -8.9114195223909203 rel_E_err 3.7902814023146306D-12 check gamma integral -1.1597508758607900E-002 2350 9.410501 2.853E+05 -4.602217 15.522127 51.607785 0.000000 0.000000 0.000000 0.214015 -0.869936 2549 42 -7.4806E+00 9.410501 -0.185580 8.851428 13.462453 -99.000000 51.607785 0.000000 0.814877 0.785985 0.295264 3 2.8823E+05 6.163497 6.404616 15.522127 15.826096 -7.482073 49.117869 0.000003 0.000011 0.108710 -0.158E+01 lgRho_cntr log_rel_run_E_err -8.8929792567099124 rel_E_err 4.3847005622617355D-13 save photos/x350 for model 2350 check gamma integral -1.2833430035090812E-002 2360 9.435187 2.844E+05 -5.346383 15.857858 51.607785 0.000000 0.000000 0.000000 0.214015 -0.853685 2533 42 -7.4815E+00 9.435187 -0.190623 9.130925 13.633817 -99.000000 51.607785 0.000000 0.750769 0.785985 0.310552 4 2.8823E+05 6.214164 6.389335 15.857858 16.038040 -7.437346 49.117869 0.000008 0.000017 0.191205 -0.194E+01 XSi_cntr log_rel_run_E_err -8.8561822085163904 rel_E_err 3.8095604656624323D-12 check gamma integral -1.4062531218889578E-002 2370 9.451896 2.838E+05 -7.064120 16.060258 51.607785 0.000000 0.000000 0.000000 0.214015 -0.886941 2523 42 -7.8218E+00 9.451896 -0.193943 9.329064 13.744956 -99.000000 51.607785 0.000000 0.632976 0.785985 0.342784 4 2.8823E+05 6.226667 6.378627 16.060258 16.160424 -7.408348 49.117869 0.000015 0.000039 0.271712 -0.220E+01 XO_cntr log_rel_run_E_err -8.8205856452510911 rel_E_err 4.0097245493245143D-12 check gamma integral -1.4637628867337178E-002 2380 9.461068 2.833E+05 -5.010393 16.166008 51.607785 0.000000 0.000000 0.000000 0.214015 -0.920299 2519 42 -7.9765E+00 9.461068 -0.195959 9.452730 13.809109 -99.000000 51.607785 0.000000 0.524936 0.785985 0.377815 3 2.8823E+05 6.225078 6.371898 16.166008 16.281364 -7.390975 49.117869 0.000020 0.000050 0.295859 -0.236E+01 XO_cntr log_rel_run_E_err -8.7895811710434923 rel_E_err 2.7055909401693790D-12 check gamma integral -1.4903526860871735E-002 2390 9.467810 2.829E+05 -4.867691 16.240063 51.607785 0.000000 0.000000 0.000000 0.214015 -0.950287 2513 42 -8.0185E+00 9.467810 -0.197692 9.559890 13.860790 -99.000000 51.607785 0.000000 0.423070 0.785985 0.415779 3 2.8823E+05 6.220278 6.365975 16.240063 16.426492 -7.376173 49.117869 0.000026 0.000051 0.326460 -0.251E+01 XO_cntr log_rel_run_E_err -8.7626404878454771 rel_E_err -4.3048912014141822D-13 check gamma integral -1.5090943821218589E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.474248 2.824E+05 -7.814909 16.304812 51.607785 0.000000 0.000000 0.000000 0.214015 -0.980229 2509 42 -7.8402E+00 9.474248 -0.199797 9.689174 13.917560 -99.000000 51.607785 0.000001 0.310112 0.785985 0.464611 4 2.8823E+05 6.214096 6.358619 16.304812 16.623438 -7.358387 49.117869 0.000032 0.000045 0.364156 -0.270E+01 dX_nuc o16 log_rel_run_E_err -8.7106858272916234 rel_E_err 4.7309852687529651D-12 save LOGS/profile27.data for model 2400 save photos/x400 for model 2400 check gamma integral -1.5277289224436748E-002 2410 9.479373 2.818E+05 -4.698465 16.345034 51.607785 0.000000 0.000000 0.000000 0.214015 -1.002463 2504 42 -7.9365E+00 9.479373 -0.202146 9.829031 13.971552 -99.000000 51.607785 0.000001 0.213509 0.785985 0.513421 3 2.8823E+05 6.209320 6.350215 16.345034 16.826341 -7.338816 49.117869 0.000037 0.000036 0.396456 -0.292E+01 dX_nuc o16 log_rel_run_E_err -8.6248079879682606 rel_E_err -5.2546006740264788D-11 check gamma integral -1.5442920137144822E-002 2420 9.483386 2.810E+05 -7.849930 16.353809 51.607785 0.000000 0.000000 0.000000 0.214015 -1.018383 2499 42 -7.8204E+00 9.483386 -0.205087 9.989321 14.023512 -99.000000 51.607785 0.000002 0.135037 0.785985 0.559350 4 2.8823E+05 6.205951 6.339414 16.353809 17.019049 -7.314749 49.121146 0.000039 0.000026 0.421308 -0.322E+01 dX_nuc o16 log_rel_run_E_err -8.5191077218218769 rel_E_err 6.0378490171856530D-12 check gamma integral -1.5607187112626070E-002 2430 9.485336 2.799E+05 -7.418739 16.305234 51.607785 0.000000 0.000000 0.000000 0.214015 -1.030990 2494 42 -7.6492E+00 9.485336 -0.208850 10.149330 14.062981 -99.000000 51.607785 0.000002 0.080804 0.785985 0.595618 4 2.8823E+05 6.201358 6.325184 16.305234 17.146921 -7.284709 49.121146 0.000038 0.000017 0.435428 -0.362E+01 dX_nuc o16 log_rel_run_E_err -8.4031054549299569 rel_E_err 6.7712271358686350D-12 check gamma integral -1.5791562891568939E-002 2440 9.481115 2.780E+05 -9.383048 16.070387 51.607785 0.000000 0.000000 0.000000 0.214015 -1.057160 2496 42 -7.4600E+00 9.481115 -0.215245 10.254050 14.059885 -99.000000 51.607785 0.000002 0.045803 0.785985 0.621510 5 2.8823E+05 6.180629 6.300106 16.070386 17.054670 -7.235759 49.121146 0.000030 0.000009 0.440042 -0.436E+01 max increase log_rel_run_E_err -8.3039655679532274 rel_E_err 9.3053134663766918D-12 check gamma integral -1.6175348213775271E-002 2450 9.462935 2.752E+05 -10.276521 15.481269 51.607785 0.000000 0.000000 0.000000 0.214015 -1.122416 2524 42 -7.7206E+00 9.462935 -0.223485 10.113417 13.943706 -99.000000 51.607785 0.000001 0.036129 0.785985 0.627102 5 2.8823E+05 6.119289 6.266419 15.481268 16.419444 -7.177229 49.121146 0.000018 0.000005 0.438741 -0.544E+01 lgRho_cntr log_rel_run_E_err -8.2477976999661156 rel_E_err 1.2179910680379265D-11 save photos/x450 for model 2450 check gamma integral -1.6814909438094629E-002 2460 9.446341 2.735E+05 -10.828018 14.993042 51.607785 0.000000 0.000000 0.000000 0.214015 -1.180492 2548 42 -7.8880E+00 9.446341 -0.228451 9.931924 13.827790 -99.000000 51.607785 0.000000 0.035145 0.785985 0.625699 7 2.8823E+05 6.064706 6.245608 14.993038 15.804405 -7.143432 49.121146 0.000012 0.000004 0.437510 -0.617E+01 lgRho_cntr log_rel_run_E_err -8.2280533288369586 rel_E_err 9.7378623070698646D-12 check gamma integral -1.7093825969140820E-002 retry: logT < hydro_mtx_min_allowed_logT 1327 2469 2470 9.431773 2.722E+05 -11.256272 14.583565 51.607785 0.000000 0.000000 0.000000 0.214015 -1.232137 2557 43 -8.1961E+00 9.431773 -0.232156 9.766453 13.723670 -99.000000 51.607785 0.000000 0.034968 0.785985 0.623845 9 2.8823E+05 6.016803 6.229883 14.583558 15.248722 -7.119087 49.121146 0.000009 0.000003 0.436774 -0.674E+01 max increase log_rel_run_E_err -8.2191870157348301 rel_E_err 9.5295462396199009D-12 check gamma integral -1.7123335648436277E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1308 2471 retry: logT < hydro_mtx_min_allowed_logT 1306 2472 retry: logT > hydro_mtx_max_allowed_logT 1299 2474 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1293 2477 retry: logT < hydro_mtx_min_allowed_logT 1284 2480 2480 9.428529 2.719E+05 -11.351351 14.494586 51.607785 0.000000 0.000000 0.000000 0.214015 -1.243725 2557 48 -8.9094E+00 9.428529 -0.232935 9.729408 13.700246 -99.000000 51.607785 0.000000 0.034951 0.785985 0.623412 5 2.8823E+05 6.006133 6.226552 14.494579 15.123210 -7.114057 49.121146 0.000008 0.000002 0.436658 -0.687E+01 retry log_rel_run_E_err -8.2122664918438506 rel_E_err 9.6494543965109348D-12 check gamma integral -1.7101300923356287E-002 retry: logT > hydro_mtx_max_allowed_logT 1283 2482 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1278 2485 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1273 2489 2490 9.426883 2.718E+05 -11.395319 14.449727 51.607785 0.000000 0.000000 0.000000 0.214015 -1.249618 2557 51 -9.0207E+00 9.426883 -0.233326 9.710591 13.688325 -99.000000 51.607785 0.000000 0.034945 0.785985 0.623190 6 2.8823E+05 6.000718 6.224884 14.449719 15.059282 -7.111549 49.121146 0.000008 0.000002 0.436606 -0.693E+01 max increase log_rel_run_E_err -8.2056852808735812 rel_E_err 9.4648350557122297D-12 check gamma integral -1.7085989267827194E-002 retry: logT < hydro_mtx_min_allowed_logT 1268 2492 retry: logT < hydro_mtx_min_allowed_logT 1259 2496 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.425282 2.716E+05 -11.444827 14.406302 51.607785 0.000000 0.000000 0.000000 0.214015 -1.255356 2557 53 -8.8309E+00 9.425282 -0.233702 9.692287 13.676712 -99.000000 51.607785 0.000000 0.034939 0.785985 0.622973 7 2.8823E+05 5.995452 6.223275 14.406293 14.996983 -7.109142 49.121146 0.000008 0.000002 0.436559 -0.699E+01 max increase log_rel_run_E_err -8.1991351674528481 rel_E_err 9.2775195908777557D-12 save LOGS/profile28.data for model 2500 save photos/x500 for model 2500 check gamma integral -1.7068403148171683E-002 retry: logT > hydro_mtx_max_allowed_logT 1258 2502 retry: adjust_correction failed in eval_equations -- give up in solver 2504 retry: logT < hydro_mtx_min_allowed_logT 1240 2507 retry: adjust_correction failed in eval_equations -- give up in solver 2510 2510 9.423700 2.715E+05 -11.493505 14.363556 51.607785 0.000000 0.000000 0.000000 0.214015 -1.261037 2557 57 -9.2432E+00 9.423700 -0.234071 9.674187 13.665212 -99.000000 51.607785 0.000000 0.034934 0.785985 0.622758 6 2.8823E+05 5.990245 6.221695 14.363547 14.935262 -7.106788 49.121146 0.000008 0.000002 0.436516 -0.705E+01 retry log_rel_run_E_err -8.1927503407917648 rel_E_err 9.2218134835071914D-12 check gamma integral -1.7048381302975906E-002 retry: logT > hydro_mtx_max_allowed_logT 1232 2517 retry: logT > hydro_mtx_max_allowed_logT 1350 2520 2520 9.421843 2.714E+05 -11.538151 14.313629 51.607785 0.000000 0.000000 0.000000 0.214015 -1.267715 2565 59 -9.0535E+00 9.421843 -0.234501 9.652942 13.651691 -99.000000 51.607785 0.000000 0.034929 0.785985 0.622503 5 2.8823E+05 5.984135 6.219850 14.313619 14.862671 -7.104038 49.121146 0.000007 0.000002 0.436471 -0.712E+01 retry log_rel_run_E_err -8.1778111506955433 rel_E_err 9.1723762921809872D-12 check gamma integral -1.7021512303662164E-002 retry: logT > hydro_mtx_max_allowed_logT 1222 2523 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1218 2526 retry: logT > hydro_mtx_max_allowed_logT 1212 2530 2530 9.420303 2.712E+05 -11.587429 14.272393 51.607785 0.000000 0.000000 0.000000 0.214015 -1.273263 2565 62 -9.1648E+00 9.420303 -0.234854 9.635311 13.640452 -99.000000 51.607785 0.000000 0.034926 0.785985 0.622292 5 2.8823E+05 5.979064 6.218336 14.272383 14.802308 -7.101808 49.121146 0.000007 0.000002 0.436437 -0.718E+01 retry log_rel_run_E_err -8.1717676703475508 rel_E_err 8.9964313416550831D-12 check gamma integral -1.6996432588323854E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1209 2533 retry: logT > hydro_mtx_max_allowed_logT 1204 2537 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1198 2540 2540 9.419013 2.711E+05 -11.623752 14.237971 51.607785 0.000000 0.000000 0.000000 0.214015 -1.277919 2565 65 -9.2760E+00 9.419013 -0.235149 9.620536 13.631020 -99.000000 51.607785 0.000000 0.034924 0.785985 0.622114 5 2.8823E+05 5.974815 6.217075 14.237960 14.751637 -7.099955 49.121146 0.000007 0.000002 0.436411 -0.723E+01 retry log_rel_run_E_err -8.1657526235520148 rel_E_err 9.4772555432785353D-12 check gamma integral -1.6973455547535880E-002 retry: logT > hydro_mtx_max_allowed_logT 1294 2546 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1187 2549 2550 9.417477 2.710E+05 -11.670953 14.197164 51.607785 0.000000 0.000000 0.000000 0.214015 -1.283466 2565 67 -9.0863E+00 9.417477 -0.235497 9.602953 13.619778 -99.000000 51.607785 0.000000 0.034921 0.785985 0.621901 6 2.8823E+05 5.969758 6.215581 14.197153 14.691233 -7.097758 49.121146 0.000007 0.000002 0.436383 -0.729E+01 max increase log_rel_run_E_err -8.1599085120466022 rel_E_err 9.4873559021988671D-12 save photos/x550 for model 2550 check gamma integral -1.6943767802233056E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1184 2551 retry: logT < hydro_mtx_min_allowed_logT 1274 2554 retry: logT < hydro_mtx_min_allowed_logT 1175 2558 2560 9.416512 2.709E+05 -11.701567 14.171593 51.607785 0.000000 0.000000 0.000000 0.214015 -1.286957 2565 70 -9.1976E+00 9.416512 -0.235716 9.591898 13.612701 -99.000000 51.607785 0.000000 0.034919 0.785985 0.621767 6 2.8823E+05 5.966578 6.214646 14.171582 14.653198 -7.096385 49.121146 0.000007 0.000002 0.436366 -0.732E+01 max increase log_rel_run_E_err -8.1541204665280329 rel_E_err 9.0695908867180534D-12 check gamma integral -1.6923787389542613E-002 retry: logT > hydro_mtx_max_allowed_logT 1166 2563 retry: logT < hydro_mtx_min_allowed_logT 1164 2566 retry: logT < hydro_mtx_min_allowed_logT 1240 2570 2570 9.415362 2.708E+05 -11.732998 14.141235 51.607785 0.000000 0.000000 0.000000 0.214015 -1.291118 2565 73 -9.3088E+00 9.415362 -0.235974 9.578736 13.604265 -99.000000 51.607785 0.000000 0.034918 0.785985 0.621607 5 2.8823E+05 5.962791 6.213537 14.141223 14.607857 -7.094762 49.121146 0.000007 0.000002 0.436348 -0.737E+01 retry log_rel_run_E_err -8.1484288894944559 rel_E_err 9.0685335544446441D-12 check gamma integral -1.6898671851844408E-002 retry: logT < hydro_mtx_min_allowed_logT 1156 2572 retry: logT < hydro_mtx_min_allowed_logT 1153 2575 retry: logT < hydro_mtx_min_allowed_logT 1152 2580 2580 9.414580 2.708E+05 -11.754418 14.120635 51.607785 0.000000 0.000000 0.000000 0.214015 -1.293951 2565 76 -9.4201E+00 9.414580 -0.236149 9.569782 13.598520 -99.000000 51.607785 0.000000 0.034917 0.785985 0.621498 5 2.8823E+05 5.960215 6.212785 14.120622 14.576977 -7.093664 49.121146 0.000007 0.000002 0.436336 -0.740E+01 retry log_rel_run_E_err -8.1429342861558034 rel_E_err 9.0542407150929305D-12 check gamma integral -1.6880756070348991E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2583 retry: logT < hydro_mtx_min_allowed_logT 1138 2588 2590 9.413723 2.707E+05 -11.777440 14.098112 51.607785 0.000000 0.000000 0.000000 0.214015 -1.297058 2565 78 -9.2304E+00 9.413723 -0.236341 9.559971 13.592220 -99.000000 51.607785 0.000000 0.034916 0.785985 0.621379 6 2.8823E+05 5.957391 6.211963 14.098099 14.543110 -7.092466 49.121146 0.000006 0.000002 0.436323 -0.743E+01 max increase log_rel_run_E_err -8.1374132369560286 rel_E_err 9.0834313884074799D-12 Layers above q= 0.99999868490985200 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11740.923828125000 max vel inside fraction of cutoff 1629.1069230052512 max c/cs inside fraction of cutoff 0.56901889038349385 average v/vesc outside cutoff -7.3262323271930926E-002 Kinetic plus potential energy outside cutoff -6.5257837302772062E+045 mass inside cutoff 1161 51.607717054842453 relax counter 0 log max v [km/s]= 3.9318162488942776 check gamma integral -1.6860350037754601E-002 retry: logT > hydro_mtx_max_allowed_logT 1134 2592 retry: logT < hydro_mtx_min_allowed_logT 1244 2597 retry: logT < hydro_mtx_min_allowed_logT 1166 2600 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.412634 2.706E+05 -11.813898 14.069541 51.607785 0.000000 0.000000 0.000000 0.214015 -1.301013 2565 81 -9.3416E+00 9.412634 -0.236584 9.547493 13.584199 -99.000000 51.607785 0.000000 0.034915 0.785985 0.621227 5 2.8823E+05 5.953800 6.210921 14.069528 14.499992 -7.090951 49.121146 0.000006 0.000002 0.436309 -0.747E+01 retry log_rel_run_E_err -8.1319140749966010 rel_E_err 9.3543906462446292D-12 save LOGS/profile29.data for model 2600 save photos/x600 for model 2600 k, q, energy_removed_layers before adjustment is 1182 0.99999827116834661 3.8331459786370322E+046 k, q, energy_removed_layers after adjustment is 1390 0.99997868718966743 3.0564361618575499E+047 Layers above q= 0.99997868718966743 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.119140625000 max vel inside fraction of cutoff 1643.8339073030122 max c/cs inside fraction of cutoff 0.57513702449270665 average v/vesc outside cutoff 0.73531218054344860 Kinetic plus potential energy outside cutoff 3.0564361618575499E+047 mass inside cutoff 1390 51.606685016800199 relax counter 0 log max v [km/s]= 3.9460654152733983 check gamma integral -1.6833224025962233E-002 retry: logT < hydro_mtx_min_allowed_logT 1126 2602 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1130 2605 2610 9.411961 2.706E+05 -11.832708 14.051933 51.607785 0.000000 0.000000 0.000000 0.214015 -1.303457 2565 83 -9.3103E+00 9.411961 -0.236733 9.539785 13.579239 -99.000000 51.607785 0.000000 0.034914 0.785985 0.621132 7 2.8823E+05 5.951582 6.210279 14.051920 14.473331 -7.090019 49.121146 0.000006 0.000002 0.436300 -0.750E+01 max increase log_rel_run_E_err -8.1266554773343280 rel_E_err 9.5382646798181389D-12 k, q, energy_removed_layers before adjustment is 1193 0.99999800600396282 6.4126433381077843E+046 k, q, energy_removed_layers after adjustment is 1390 0.99997868718966743 3.2128318634012341E+047 Layers above q= 0.99997868718966743 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.242187500000 max vel inside fraction of cutoff 1652.8463117240146 max c/cs inside fraction of cutoff 0.57889573186020837 average v/vesc outside cutoff 0.75065290042387434 Kinetic plus potential energy outside cutoff 3.2128318634012341E+047 mass inside cutoff 1390 51.606685016800199 relax counter 0 log max v [km/s]= 3.9561992309107228 check gamma integral -1.6815809136265170E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1124 2611 retry: logT > hydro_mtx_max_allowed_logT 1109 2615 2620 9.411147 2.705E+05 -11.851184 14.030700 51.607785 0.000000 0.000000 0.000000 0.214015 -1.306413 2565 85 -9.1205E+00 9.411147 -0.236913 9.530473 13.573242 -99.000000 51.607785 0.000000 0.034913 0.785985 0.621018 9 2.8823E+05 5.948902 6.209505 14.030687 14.441094 -7.088898 49.121146 0.000006 0.000002 0.436291 -0.753E+01 max increase log_rel_run_E_err -8.1214269842467939 rel_E_err 8.8786871712017950D-12 k, q, energy_removed_layers before adjustment is 1202 0.99999770711142622 9.3054595056255516E+046 k, q, energy_removed_layers after adjustment is 1391 0.99997842464029485 3.3963983612176314E+047 Layers above q= 0.99997842464029485 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.388671875000 max vel inside fraction of cutoff 1663.6472954054723 max c/cs inside fraction of cutoff 0.58341544889992636 average v/vesc outside cutoff 0.76749858444885510 Kinetic plus potential energy outside cutoff 3.3963983612176314E+047 mass inside cutoff 1391 51.606671467208649 relax counter 0 log max v [km/s]= 3.9786563980132557 check gamma integral -1.6794093554053684E-002 retry: logT > hydro_mtx_max_allowed_logT 1107 2621 retry: logT < hydro_mtx_min_allowed_logT 1101 2623 retry: logT > hydro_mtx_max_allowed_logT 1097 2626 retry: logT < hydro_mtx_min_allowed_logT 1114 2629 2630 9.410480 2.704E+05 -11.873101 14.013301 51.607785 0.000000 0.000000 0.000000 0.214015 -1.308841 2565 89 -9.5328E+00 9.410480 -0.237061 9.522828 13.568314 -99.000000 51.607785 0.000000 0.034913 0.785985 0.620925 5 2.8823E+05 5.946700 6.208871 14.013287 14.414605 -7.087980 49.121146 0.000006 0.000002 0.436283 -0.755E+01 max increase log_rel_run_E_err -8.1162932066398117 rel_E_err 8.7905827303875298D-12 k, q, energy_removed_layers before adjustment is 1209 0.99999748004146571 1.1470999568108101E+047 k, q, energy_removed_layers after adjustment is 1391 0.99997842464029485 3.5433089645847397E+047 Layers above q= 0.99997842464029485 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.507812500000 max vel inside fraction of cutoff 1672.4465679142454 max c/cs inside fraction of cutoff 0.58710961409974072 average v/vesc outside cutoff 0.78175054922518750 Kinetic plus potential energy outside cutoff 3.5433089645847397E+047 mass inside cutoff 1391 51.606671467208649 relax counter 0 log max v [km/s]= 3.9772920085257040 check gamma integral -1.6775709717728307E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1088 2633 hydro_solver_step returned ierr -1 s% model_number 2636 nz 2565 s% num_retries 90 retry: logT > hydro_mtx_max_allowed_logT 1086 2636 2640 9.409886 2.704E+05 -11.887946 13.997870 51.607785 0.000000 0.000000 0.000000 0.214015 -1.311000 2565 91 -9.3431E+00 9.409886 -0.237192 9.516036 13.563933 -99.000000 51.607785 0.000000 0.034912 0.785985 0.620841 6 2.8823E+05 5.944745 6.208308 13.997855 14.391058 -7.087168 49.121146 0.000006 0.000002 0.436276 -0.757E+01 max increase log_rel_run_E_err -8.1111756036835114 rel_E_err 9.0512422795242783D-12 k, q, energy_removed_layers before adjustment is 1216 0.99999724391339051 1.3408719875007936E+047 k, q, energy_removed_layers after adjustment is 1391 0.99997842464029485 3.6708117610463401E+047 Layers above q= 0.99997842464029485 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.613281250000 max vel inside fraction of cutoff 1680.2115714527213 max c/cs inside fraction of cutoff 0.59037866544927764 average v/vesc outside cutoff 0.79412749865309362 Kinetic plus potential energy outside cutoff 3.6708117610463401E+047 mass inside cutoff 1391 51.606671467208649 relax counter 0 log max v [km/s]= 3.9967252683141492 check gamma integral -1.6758960066865999E-002 retry: logT < hydro_mtx_min_allowed_logT 1101 2641 retry: logT > hydro_mtx_max_allowed_logT 1082 2647 retry: logT < hydro_mtx_min_allowed_logT 1077 2650 2650 9.409073 2.703E+05 -11.913845 13.976761 51.607785 0.000000 0.000000 0.000000 0.214015 -1.313960 2565 94 -9.4543E+00 9.409073 -0.237370 9.506729 13.557925 -99.000000 51.607785 0.000000 0.034912 0.785985 0.620727 5 2.8823E+05 5.942065 6.207539 13.976746 14.358767 -7.086058 49.121146 0.000006 0.000002 0.436268 -0.760E+01 retry log_rel_run_E_err -8.1061576903737151 rel_E_err 9.0346412948959005D-12 save photos/x650 for model 2650 k, q, energy_removed_layers before adjustment is 1224 0.99999694635242153 1.5899787667688332E+047 k, q, energy_removed_layers after adjustment is 1392 0.99997815915277288 3.8414307720733242E+047 Layers above q= 0.99997815915277288 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.755859375000 max vel inside fraction of cutoff 1690.7729628165391 max c/cs inside fraction of cutoff 0.59483897645687711 average v/vesc outside cutoff 0.80919516356663623 Kinetic plus potential energy outside cutoff 3.8414307720733242E+047 mass inside cutoff 1392 51.606657765985716 relax counter 0 log max v [km/s]= 4.0108281828005126 check gamma integral -1.6735361775737350E-002 retry: logT > hydro_mtx_max_allowed_logT 1068 2654 retry: logT > hydro_mtx_max_allowed_logT 1066 2656 retry: logT > hydro_mtx_max_allowed_logT 1063 2659 2660 9.408391 2.703E+05 -11.932979 13.959077 51.607785 0.000000 0.000000 0.000000 0.214015 -1.316446 2565 97 -9.5656E+00 9.408391 -0.237520 9.498917 13.552877 -99.000000 51.607785 0.000000 0.034911 0.785985 0.620631 5 2.8823E+05 5.939815 6.206892 13.959062 14.331643 -7.085130 49.121146 0.000006 0.000002 0.436261 -0.763E+01 max increase log_rel_run_E_err -8.1012183074668513 rel_E_err 9.0725445183360943D-12 k, q, energy_removed_layers before adjustment is 1229 0.99999669749636089 1.7863201861408241E+047 k, q, energy_removed_layers after adjustment is 1393 0.99997789072115295 3.9809344325827322E+047 Layers above q= 0.99997789072115295 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.875000000000 max vel inside fraction of cutoff 1699.5694529982779 max c/cs inside fraction of cutoff 0.59856614872782044 average v/vesc outside cutoff 0.82103579427018580 Kinetic plus potential energy outside cutoff 3.9809344325827322E+047 mass inside cutoff 1393 51.606643912824410 relax counter 0 log max v [km/s]= 4.0158559148271067 check gamma integral -1.6714979906701989E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2662 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1055 2667 retry: logT > hydro_mtx_max_allowed_logT 1052 2670 2670 9.407870 2.702E+05 -11.950133 13.945605 51.607785 0.000000 0.000000 0.000000 0.214015 -1.318343 2565 100 -9.6769E+00 9.407870 -0.237634 9.492956 13.549024 -99.000000 51.607785 0.000000 0.034911 0.785985 0.620558 5 2.8823E+05 5.938099 6.206400 13.945590 14.310935 -7.084422 49.121146 0.000006 0.000002 0.436256 -0.765E+01 retry log_rel_run_E_err -8.0963114558709623 rel_E_err 8.8382589837015694D-12 k, q, energy_removed_layers before adjustment is 1233 0.99999649860577988 1.9342937337025737E+047 k, q, energy_removed_layers after adjustment is 1393 0.99997789072115295 4.0853985994512737E+047 Layers above q= 0.99997789072115295 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11741.966796875000 max vel inside fraction of cutoff 1706.2403734942609 max c/cs inside fraction of cutoff 0.60140011494554069 average v/vesc outside cutoff 0.83099617255879499 Kinetic plus potential energy outside cutoff 4.0853985994512737E+047 mass inside cutoff 1393 51.606643912824410 relax counter 0 log max v [km/s]= 4.0342995148872207 check gamma integral -1.6699073191849878E-002 retry: logT > hydro_mtx_max_allowed_logT 1048 2674 retry: logT > hydro_mtx_max_allowed_logT 1042 2679 2680 9.407301 2.702E+05 -11.963668 13.930887 51.607785 0.000000 0.000000 0.000000 0.214015 -1.320421 2565 102 -9.4871E+00 9.407301 -0.237759 9.486435 13.544805 -99.000000 51.607785 0.000000 0.034910 0.785985 0.620477 6 2.8823E+05 5.936220 6.205863 13.930872 14.288268 -7.083650 49.121146 0.000006 0.000002 0.436251 -0.767E+01 max increase log_rel_run_E_err -8.0915061921639300 rel_E_err 9.2358095551105251D-12 k, q, energy_removed_layers before adjustment is 1237 0.99999627518946244 2.1026406090336568E+047 k, q, energy_removed_layers after adjustment is 1393 0.99997789072115295 4.1974018673444249E+047 Layers above q= 0.99997789072115295 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.064453125000 max vel inside fraction of cutoff 1713.4975066791649 max c/cs inside fraction of cutoff 0.60449052215713661 average v/vesc outside cutoff 0.84168691664502326 Kinetic plus potential energy outside cutoff 4.1974018673444249E+047 mass inside cutoff 1393 51.606643912824410 relax counter 0 log max v [km/s]= 4.0533229852114179 check gamma integral -1.6681319154856541E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1040 2681 retry: logT > hydro_mtx_max_allowed_logT 1037 2685 retry: logT > hydro_mtx_max_allowed_logT 1033 2688 2690 9.406860 2.702E+05 -11.978751 13.919505 51.607785 0.000000 0.000000 0.000000 0.214015 -1.322030 2565 105 -9.5984E+00 9.406860 -0.237855 9.481385 13.541536 -99.000000 51.607785 0.000000 0.034910 0.785985 0.620415 6 2.8823E+05 5.934766 6.205447 13.919489 14.270707 -7.083054 49.121146 0.000006 0.000001 0.436247 -0.769E+01 max increase log_rel_run_E_err -8.0867572686382019 rel_E_err 9.0407472714640802D-12 k, q, energy_removed_layers before adjustment is 1239 0.99999615916719531 2.2078401592097853E+047 k, q, energy_removed_layers after adjustment is 1394 0.99997761963972487 4.2825987516689021E+047 Layers above q= 0.99997761963972487 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.140625000000 max vel inside fraction of cutoff 1719.0887924150738 max c/cs inside fraction of cutoff 0.60687677339901058 average v/vesc outside cutoff 0.84672103493184880 Kinetic plus potential energy outside cutoff 4.2825987516689021E+047 mass inside cutoff 1394 51.606629922912376 relax counter 0 log max v [km/s]= 4.0511018196377204 check gamma integral -1.6667316668741116E-002 retry: logT > hydro_mtx_max_allowed_logT 1029 2693 retry: logT < hydro_mtx_min_allowed_logT 1025 2697 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.406304 2.701E+05 -11.993936 13.905169 51.607785 0.000000 0.000000 0.000000 0.214015 -1.324061 2565 107 -9.4087E+00 9.406304 -0.237977 9.475017 13.537412 -99.000000 51.607785 0.000000 0.034910 0.785985 0.620337 9 2.8823E+05 5.932931 6.204924 13.905153 14.248551 -7.082304 49.121146 0.000006 0.000001 0.436243 -0.771E+01 max increase log_rel_run_E_err -8.0820500085362053 rel_E_err 8.9413302028052707D-12 save LOGS/profile30.data for model 2700 save photos/x700 for model 2700 k, q, energy_removed_layers before adjustment is 1242 0.99999598405015233 2.3437838777599771E+047 k, q, energy_removed_layers after adjustment is 1398 0.99997668261527728 4.3885391472526473E+047 Layers above q= 0.99997668261527728 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.236328125000 max vel inside fraction of cutoff 1726.1032897568211 max c/cs inside fraction of cutoff 0.60987699918580374 average v/vesc outside cutoff 0.85045835572122530 Kinetic plus potential energy outside cutoff 4.3885391472526473E+047 mass inside cutoff 1398 51.606581565156205 relax counter 0 log max v [km/s]= 4.0643083643720912 check gamma integral -1.6649343652976305E-002 retry: logT > hydro_mtx_max_allowed_logT 1021 2701 retry: logT > hydro_mtx_max_allowed_logT 1024 2707 retry: logT < hydro_mtx_min_allowed_logT 1014 2709 2710 9.405635 2.701E+05 -12.014513 13.887968 51.607785 0.000000 0.000000 0.000000 0.214015 -1.326502 2565 110 -9.5199E+00 9.405635 -0.238122 9.467365 13.532453 -99.000000 51.607785 0.000000 0.034910 0.785985 0.620242 5 2.8823E+05 5.930727 6.204294 13.887952 14.221912 -7.081405 49.121146 0.000006 0.000001 0.436237 -0.773E+01 max increase log_rel_run_E_err -8.0773847646484036 rel_E_err 8.7162514885746948D-12 k, q, energy_removed_layers before adjustment is 1248 0.99999576217171149 2.5057407494164060E+047 k, q, energy_removed_layers after adjustment is 1400 0.99997620258297371 4.5146030509482026E+047 Layers above q= 0.99997620258297371 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.353515625000 max vel inside fraction of cutoff 1734.4799367216856 max c/cs inside fraction of cutoff 0.61346948648562183 average v/vesc outside cutoff 0.85871920462818374 Kinetic plus potential energy outside cutoff 4.5146030509482026E+047 mass inside cutoff 1400 51.606556791752332 relax counter 0 log max v [km/s]= 4.0795251164678401 check gamma integral -1.6627279395888366E-002 retry: logT < hydro_mtx_min_allowed_logT 1018 2712 retry: logT > hydro_mtx_max_allowed_logT 1005 2717 2720 9.405003 2.700E+05 -12.031671 13.871743 51.607785 0.000000 0.000000 0.000000 0.214015 -1.328810 2565 112 -9.3302E+00 9.405003 -0.238259 9.460135 13.527763 -99.000000 51.607785 0.000000 0.034909 0.785985 0.620153 7 2.8823E+05 5.928643 6.203703 13.871726 14.196728 -7.080558 49.121146 0.000006 0.000001 0.436232 -0.776E+01 max increase log_rel_run_E_err -8.0727281226729275 rel_E_err 9.4653924531199768D-12 k, q, energy_removed_layers before adjustment is 1254 0.99999552014904014 2.6655086349776528E+047 k, q, energy_removed_layers after adjustment is 1402 0.99997571330054147 4.6324998209140696E+047 Layers above q= 0.99997571330054147 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.460937500000 max vel inside fraction of cutoff 1742.3430129376593 max c/cs inside fraction of cutoff 0.61685124165473615 average v/vesc outside cutoff 0.87067631124368206 Kinetic plus potential energy outside cutoff 4.6324998209140696E+047 mass inside cutoff 1402 51.606531540969804 relax counter 0 log max v [km/s]= 4.0909398337873659 check gamma integral -1.6605961128330737E-002 retry: logT > hydro_mtx_max_allowed_logT 1001 2721 retry: logT > hydro_mtx_max_allowed_logT 997 2725 retry: logT > hydro_mtx_max_allowed_logT 993 2729 2730 9.404314 2.700E+05 -12.052493 13.854072 51.607785 0.000000 0.000000 0.000000 0.214015 -1.331329 2565 115 -9.4415E+00 9.404314 -0.238409 9.452247 13.522643 -99.000000 51.607785 0.000000 0.034909 0.785985 0.620055 5 2.8823E+05 5.926370 6.203057 13.854054 14.169238 -7.079637 49.121146 0.000006 0.000001 0.436227 -0.778E+01 max increase log_rel_run_E_err -8.0681725365352737 rel_E_err 8.8437525635066930D-12 k, q, energy_removed_layers before adjustment is 1259 0.99999527495167051 2.8205585865923148E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 4.7578400057432885E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.582031250000 max vel inside fraction of cutoff 1750.8643536553320 max c/cs inside fraction of cutoff 0.62052664004641389 average v/vesc outside cutoff 0.87883762202032789 Kinetic plus potential energy outside cutoff 4.7578400057432885E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1052035102068540 check gamma integral -1.6582182923868632E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 991 2732 retry: logT < hydro_mtx_min_allowed_logT 988 2735 retry: logT > hydro_mtx_max_allowed_logT 985 2738 2740 9.403775 2.699E+05 -12.068134 13.840259 51.607785 0.000000 0.000000 0.000000 0.214015 -1.333303 2565 118 -9.5527E+00 9.403775 -0.238526 9.446073 13.518633 -99.000000 51.607785 0.000000 0.034909 0.785985 0.619979 6 2.8823E+05 5.924591 6.202552 13.840241 14.147707 -7.078918 49.121146 0.000006 0.000001 0.436223 -0.780E+01 max increase log_rel_run_E_err -8.0636935876737539 rel_E_err 8.9272921382996765D-12 k, q, energy_removed_layers before adjustment is 1263 0.99999504149673124 2.9676564842075868E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 4.8543116444375491E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.673828125000 max vel inside fraction of cutoff 1757.4949906645622 max c/cs inside fraction of cutoff 0.62339410629305703 average v/vesc outside cutoff 0.88727776315175011 Kinetic plus potential energy outside cutoff 4.8543116444375491E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1113444755045245 check gamma integral -1.6563188245111608E-002 retry: logT < hydro_mtx_min_allowed_logT 1042 2743 retry: logT < hydro_mtx_min_allowed_logT 978 2746 retry: logT < hydro_mtx_min_allowed_logT 975 2749 2750 9.403258 2.699E+05 -12.083549 13.827046 51.607785 0.000000 0.000000 0.000000 0.214015 -1.335194 2565 121 -9.6640E+00 9.403258 -0.238637 9.440158 13.514789 -99.000000 51.607785 0.000000 0.034908 0.785985 0.619906 6 2.8823E+05 5.922886 6.202068 13.827029 14.127075 -7.078231 49.121146 0.000006 0.000001 0.436220 -0.782E+01 max increase log_rel_run_E_err -8.0592408381278684 rel_E_err 8.8501397307506545D-12 save photos/x750 for model 2750 k, q, energy_removed_layers before adjustment is 1265 0.99999487588807190 3.0867032992748732E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 4.9449713460421671E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.763671875000 max vel inside fraction of cutoff 1763.8128546395681 max c/cs inside fraction of cutoff 0.62613254135106100 average v/vesc outside cutoff 0.89522212402786194 Kinetic plus potential energy outside cutoff 4.9449713460421671E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1259928017897494 check gamma integral -1.6544680472162152E-002 retry: logT < hydro_mtx_min_allowed_logT 974 2752 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 967 2757 2760 9.402799 2.698E+05 -12.095820 13.815312 51.607785 0.000000 0.000000 0.000000 0.214015 -1.336876 2565 123 -9.4743E+00 9.402799 -0.238737 9.434899 13.511369 -99.000000 51.607785 0.000000 0.034908 0.785985 0.619840 7 2.8823E+05 5.921371 6.201641 13.815294 14.108721 -7.077621 49.121146 0.000006 0.000001 0.436217 -0.784E+01 max increase log_rel_run_E_err -8.0548391731032751 rel_E_err 8.8251273263365551D-12 k, q, energy_removed_layers before adjustment is 1267 0.99999472525120803 3.1826972395678465E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 5.0241876108036789E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.841796875000 max vel inside fraction of cutoff 1769.4040490051789 max c/cs inside fraction of cutoff 0.62856108981385173 average v/vesc outside cutoff 0.90217446687853364 Kinetic plus potential energy outside cutoff 5.0241876108036789E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1410117965905995 check gamma integral -1.6527963168390020E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1010 2761 retry: adjust_correction failed in eval_equations -- give up in solver 2765 retry: logT > hydro_mtx_max_allowed_logT 957 2770 2770 9.402258 2.698E+05 -12.111408 13.801507 51.607785 0.000000 0.000000 0.000000 0.214015 -1.338858 2565 126 -9.5855E+00 9.402258 -0.238853 9.428704 13.507338 -99.000000 51.607785 0.000000 0.034908 0.785985 0.619764 5 2.8823E+05 5.919585 6.201136 13.801489 14.087093 -7.076904 49.121146 0.000006 0.000001 0.436214 -0.786E+01 retry log_rel_run_E_err -8.0505151909053367 rel_E_err 8.7575524751582070D-12 k, q, energy_removed_layers before adjustment is 1269 0.99999459334153973 3.2825830111332037E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 5.1158073941373045E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11742.933593750000 max vel inside fraction of cutoff 1775.9570994020492 max c/cs inside fraction of cutoff 0.63141358436972761 average v/vesc outside cutoff 0.91022873724437114 Kinetic plus potential energy outside cutoff 5.1158073941373045E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1527967240529220 check gamma integral -1.6507960420580656E-002 retry: logT < hydro_mtx_min_allowed_logT 958 2773 retry: logT < hydro_mtx_min_allowed_logT 951 2777 2780 9.401669 2.698E+05 -12.127309 13.786505 51.607785 0.000000 0.000000 0.000000 0.214015 -1.341017 2565 128 -9.3958E+00 9.401669 -0.238980 9.421963 13.502949 -99.000000 51.607785 0.000000 0.034908 0.785985 0.619680 8 2.8823E+05 5.917641 6.200590 13.786486 14.063548 -7.076127 49.121146 0.000006 0.000001 0.436210 -0.788E+01 max increase log_rel_run_E_err -8.0462482026892275 rel_E_err 8.7507896748411409D-12 k, q, energy_removed_layers before adjustment is 1273 0.99999432826340773 3.4261579202532420E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 5.2134930593865580E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.031250000000 max vel inside fraction of cutoff 1783.0487985295158 max c/cs inside fraction of cutoff 0.63450805871357463 average v/vesc outside cutoff 0.91883315002048660 Kinetic plus potential energy outside cutoff 5.2134930593865580E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1622917669228912 check gamma integral -1.6485806140767705E-002 retry: logT > hydro_mtx_max_allowed_logT 946 2781 retry: logT > hydro_mtx_max_allowed_logT 945 2783 retry: logT < hydro_mtx_min_allowed_logT 941 2787 retry: logT > hydro_mtx_max_allowed_logT 937 2790 2790 9.401241 2.697E+05 -12.142091 13.775620 51.607785 0.000000 0.000000 0.000000 0.214015 -1.342585 2565 132 -9.8081E+00 9.401241 -0.239072 9.417066 13.499759 -99.000000 51.607785 0.000000 0.034908 0.785985 0.619619 5 2.8823E+05 5.916230 6.200192 13.775601 14.046436 -7.075563 49.121146 0.000006 0.000001 0.436208 -0.790E+01 retry log_rel_run_E_err -8.0420549402893222 rel_E_err 9.0499116266629936D-12 k, q, energy_removed_layers before adjustment is 1275 0.99999419568747872 3.5118780634056016E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997529696451459 5.2831922228889961E+047 Layers above q= 0.99997529696451459 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.103515625000 max vel inside fraction of cutoff 1788.1755091209063 max c/cs inside fraction of cutoff 0.63674993727497664 average v/vesc outside cutoff 0.92498389720438923 Kinetic plus potential energy outside cutoff 5.2831922228889961E+047 mass inside cutoff 1403 51.606510054789673 relax counter 0 log max v [km/s]= 4.1724403629705433 check gamma integral -1.6469460181643854E-002 hydro_solver_step returned ierr -1 s% model_number 2793 nz 2565 s% num_retries 132 retry: logT < hydro_mtx_min_allowed_logT 966 2793 retry: logT < hydro_mtx_min_allowed_logT 996 2797 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 9.400886 2.697E+05 -12.151607 13.766609 51.607785 0.000000 0.000000 0.000000 0.214015 -1.343886 2565 134 -9.6183E+00 9.400886 -0.239149 9.413007 13.497113 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619569 8 2.8823E+05 5.915059 6.199864 13.766590 14.032252 -7.075097 49.121146 0.000006 0.000001 0.436206 -0.791E+01 max increase log_rel_run_E_err -8.0378539813168786 rel_E_err 8.7984020640357571D-12 save LOGS/profile31.data for model 2800 save photos/x800 for model 2800 k, q, energy_removed_layers before adjustment is 1277 0.99999407198180545 3.5791754070683341E+047 k, q, energy_removed_layers after adjustment is 1404 0.99997487451130085 5.3404129959812477E+047 Layers above q= 0.99997487451130085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.164062500000 max vel inside fraction of cutoff 1792.4081130664540 max c/cs inside fraction of cutoff 0.63860390945897905 average v/vesc outside cutoff 0.92403355171785695 Kinetic plus potential energy outside cutoff 5.3404129959812477E+047 mass inside cutoff 1404 51.606488252915078 relax counter 0 log max v [km/s]= 4.1847966486076009 check gamma integral -1.6455752406536510E-002 retry: logT < hydro_mtx_min_allowed_logT 931 2801 retry: logT < hydro_mtx_min_allowed_logT 952 2804 retry: logT < hydro_mtx_min_allowed_logT 930 2807 2810 9.400592 2.697E+05 -12.159959 13.759128 51.607785 0.000000 0.000000 0.000000 0.214015 -1.344966 2565 137 -9.7296E+00 9.400592 -0.239212 9.409635 13.494915 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619527 7 2.8823E+05 5.914087 6.199590 13.759109 14.020465 -7.074710 49.121146 0.000006 0.000001 0.436204 -0.792E+01 max increase log_rel_run_E_err -8.0337116068920018 rel_E_err 8.3602097192642810D-12 k, q, energy_removed_layers before adjustment is 1278 0.99999401513044317 3.6253243777311539E+047 k, q, energy_removed_layers after adjustment is 1404 0.99997487451130085 5.3874319703017191E+047 Layers above q= 0.99997487451130085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.212890625000 max vel inside fraction of cutoff 1795.9135167366946 max c/cs inside fraction of cutoff 0.64014147008368538 average v/vesc outside cutoff 0.92813122499530387 Kinetic plus potential energy outside cutoff 5.3874319703017191E+047 mass inside cutoff 1404 51.606488252915078 relax counter 0 log max v [km/s]= 4.1893731780520760 check gamma integral -1.6444252773703951E-002 retry: logT < hydro_mtx_min_allowed_logT 924 2812 retry: logT > hydro_mtx_max_allowed_logT 916 2817 retry: logT < hydro_mtx_min_allowed_logT 992 2820 2820 9.400218 2.696E+05 -12.171693 13.749647 51.607785 0.000000 0.000000 0.000000 0.214015 -1.346338 2565 140 -9.8409E+00 9.400218 -0.239292 9.405358 13.492125 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619474 5 2.8823E+05 5.912854 6.199243 13.749627 14.005509 -7.074220 49.121146 0.000006 0.000001 0.436202 -0.794E+01 retry log_rel_run_E_err -8.0295738890155519 rel_E_err 8.8802766205456872D-12 k, q, energy_removed_layers before adjustment is 1281 0.99999384199115859 3.7101491873994026E+047 k, q, energy_removed_layers after adjustment is 1404 0.99997487451130085 5.4463622053587198E+047 Layers above q= 0.99997487451130085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.275390625000 max vel inside fraction of cutoff 1800.3454605917054 max c/cs inside fraction of cutoff 0.64208822889985717 average v/vesc outside cutoff 0.93327395924457035 Kinetic plus potential energy outside cutoff 5.4463622053587198E+047 mass inside cutoff 1404 51.606488252915078 relax counter 0 log max v [km/s]= 4.2023645244385550 check gamma integral -1.6429521193092333E-002 retry: logT < hydro_mtx_min_allowed_logT 978 2823 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 944 2827 2830 9.399916 2.696E+05 -12.179273 13.741990 51.607785 0.000000 0.000000 0.000000 0.214015 -1.347446 2565 142 -9.8095E+00 9.399916 -0.239357 9.401902 13.489870 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619431 5 2.8823E+05 5.911857 6.198964 13.741971 13.993420 -7.073824 49.121146 0.000006 0.000001 0.436200 -0.795E+01 max increase log_rel_run_E_err -8.0255056745402502 rel_E_err 8.7032062942876788D-12 k, q, energy_removed_layers before adjustment is 1283 0.99999372422273980 3.7706103975041455E+047 k, q, energy_removed_layers after adjustment is 1404 0.99997487451130085 5.4934282642700568E+047 Layers above q= 0.99997487451130085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.324218750000 max vel inside fraction of cutoff 1803.9156427491539 max c/cs inside fraction of cutoff 0.64365869598876202 average v/vesc outside cutoff 0.93738714978904092 Kinetic plus potential energy outside cutoff 5.4934282642700568E+047 mass inside cutoff 1404 51.606488252915078 relax counter 0 log max v [km/s]= 4.2076647627770356 check gamma integral -1.6417496322757064E-002 retry: logT < hydro_mtx_min_allowed_logT 913 2833 retry: logT < hydro_mtx_min_allowed_logT 900 2837 2840 9.399560 2.696E+05 -12.190183 13.732971 51.607785 0.000000 0.000000 0.000000 0.214015 -1.348753 2565 144 -9.6198E+00 9.399560 -0.239433 9.397826 13.487210 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619380 5 2.8823E+05 5.910682 6.198634 13.732951 13.979164 -7.073358 49.121146 0.000006 0.000001 0.436199 -0.796E+01 max increase log_rel_run_E_err -8.0214680865546253 rel_E_err 8.7515139510533002D-12 k, q, energy_removed_layers before adjustment is 1284 0.99999366454459149 3.8290455986947704E+047 k, q, energy_removed_layers after adjustment is 1405 0.99997453693226990 5.5483459698112955E+047 Layers above q= 0.99997453693226990 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.384765625000 max vel inside fraction of cutoff 1808.1113156832430 max c/cs inside fraction of cutoff 0.64550690336869221 average v/vesc outside cutoff 0.93940770662871509 Kinetic plus potential energy outside cutoff 5.5483459698112955E+047 mass inside cutoff 1405 51.606470831209052 relax counter 0 log max v [km/s]= 4.2177903950208409 check gamma integral -1.6403182569825314E-002 retry: logT < hydro_mtx_min_allowed_logT 907 2843 retry: logT < hydro_mtx_min_allowed_logT 894 2846 retry: logT < hydro_mtx_min_allowed_logT 894 2850 2850 9.399077 2.696E+05 -12.203445 13.720750 51.607785 0.000000 0.000000 0.000000 0.214015 -1.350527 2565 147 -9.7310E+00 9.399077 -0.239537 9.392299 13.483600 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619311 5 2.8823E+05 5.909088 6.198187 13.720730 13.959823 -7.072728 49.121146 0.000005 0.000001 0.436196 -0.798E+01 retry log_rel_run_E_err -8.0175036435619287 rel_E_err 8.7491519815532605D-12 save photos/x850 for model 2850 k, q, energy_removed_layers before adjustment is 1286 0.99999350081068461 3.9240546235116034E+047 k, q, energy_removed_layers after adjustment is 1405 0.99997453693226990 5.6220121613390181E+047 Layers above q= 0.99997453693226990 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.464843750000 max vel inside fraction of cutoff 1813.7787984854119 max c/cs inside fraction of cutoff 0.64800794468065270 average v/vesc outside cutoff 0.94579101399264420 Kinetic plus potential energy outside cutoff 5.6220121613390181E+047 mass inside cutoff 1405 51.606470831209052 relax counter 0 log max v [km/s]= 4.2275085866595408 check gamma integral -1.6383530601209409E-002 retry: logT < hydro_mtx_min_allowed_logT 890 2854 retry: logT < hydro_mtx_min_allowed_logT 886 2858 2860 9.398586 2.695E+05 -12.217683 13.708337 51.607785 0.000000 0.000000 0.000000 0.214015 -1.352332 2565 149 -9.5413E+00 9.398586 -0.239642 9.386677 13.479927 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619241 9 2.8823E+05 5.907467 6.197733 13.708316 13.940148 -7.072088 49.121146 0.000005 0.000001 0.436194 -0.800E+01 max increase log_rel_run_E_err -8.0135832842833992 rel_E_err 8.7289132036472748D-12 k, q, energy_removed_layers before adjustment is 1288 0.99999333318665418 4.0100758593031921E+047 k, q, energy_removed_layers after adjustment is 1405 0.99997453693226990 5.6956673468559111E+047 Layers above q= 0.99997453693226990 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.544921875000 max vel inside fraction of cutoff 1819.5152421848318 max c/cs inside fraction of cutoff 0.65054465135144879 average v/vesc outside cutoff 0.95218767634068546 Kinetic plus potential energy outside cutoff 5.6956673468559111E+047 mass inside cutoff 1405 51.606470831209052 relax counter 0 log max v [km/s]= 4.2424688755406859 check gamma integral -1.6363265306984499E-002 retry: logT < hydro_mtx_min_allowed_logT 883 2861 retry: logT < hydro_mtx_min_allowed_logT 934 2863 retry: logT < hydro_mtx_min_allowed_logT 890 2866 retry: logT > hydro_mtx_max_allowed_logT 876 2870 2870 9.398295 2.695E+05 -12.226020 13.700997 51.607785 0.000000 0.000000 0.000000 0.214015 -1.353400 2565 153 -9.9536E+00 9.398295 -0.239704 9.383350 13.477752 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619200 5 2.8823E+05 5.906507 6.197463 13.700976 13.928500 -7.071709 49.121146 0.000005 0.000001 0.436193 -0.801E+01 retry log_rel_run_E_err -8.0096679202896084 rel_E_err 8.5691580785528315D-12 k, q, energy_removed_layers before adjustment is 1290 0.99999320172513839 4.0712803019775988E+047 k, q, energy_removed_layers after adjustment is 1406 0.99997419576963187 5.7387997095707045E+047 Layers above q= 0.99997419576963187 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.591796875000 max vel inside fraction of cutoff 1822.8978016241258 max c/cs inside fraction of cutoff 0.65204288854820847 average v/vesc outside cutoff 0.95305693354137577 Kinetic plus potential energy outside cutoff 5.7387997095707045E+047 mass inside cutoff 1406 51.606453224561008 relax counter 0 log max v [km/s]= 4.2465013229349298 check gamma integral -1.6351139360035471E-002 retry: logT > hydro_mtx_max_allowed_logT 873 2874 retry: logT > hydro_mtx_max_allowed_logT 870 2878 2880 9.398000 2.695E+05 -12.236022 13.693547 51.607785 0.000000 0.000000 0.000000 0.214015 -1.354486 2565 155 -9.7638E+00 9.398000 -0.239767 9.379971 13.475542 -99.000000 51.607785 0.000000 0.034907 0.785985 0.619157 6 2.8823E+05 5.905532 6.197191 13.693526 13.916667 -7.071325 49.121146 0.000005 0.000001 0.436191 -0.802E+01 max increase log_rel_run_E_err -8.0057862690529138 rel_E_err 8.6231706079416834D-12 k, q, energy_removed_layers before adjustment is 1292 0.99999306810030442 4.1337631648290707E+047 k, q, energy_removed_layers after adjustment is 1406 0.99997419576963187 5.7822931891505238E+047 Layers above q= 0.99997419576963187 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.640625000000 max vel inside fraction of cutoff 1826.3242868176135 max c/cs inside fraction of cutoff 0.65356246373048332 average v/vesc outside cutoff 0.95680190238016871 Kinetic plus potential energy outside cutoff 5.7822931891505238E+047 mass inside cutoff 1406 51.606453224561008 relax counter 0 log max v [km/s]= 4.2582090702306656 check gamma integral -1.6338720207403224E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 867 2882 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 864 2886 retry: logT < hydro_mtx_min_allowed_logT 863 2889 2890 9.397695 2.694E+05 -12.243281 13.685876 51.607785 0.000000 0.000000 0.000000 0.214015 -1.355604 2565 158 -9.8751E+00 9.397695 -0.239832 9.376489 13.473264 -99.000000 51.607785 0.000000 0.034906 0.785985 0.619114 5 2.8823E+05 5.904528 6.196910 13.685855 13.904472 -7.070929 49.121146 0.000005 0.000001 0.436190 -0.803E+01 max increase log_rel_run_E_err -8.0018894050602096 rel_E_err 8.9585844545570472D-12 k, q, energy_removed_layers before adjustment is 1293 0.99999299553842669 4.1786303788232113E+047 k, q, energy_removed_layers after adjustment is 1406 0.99997419576963187 5.8266461699126059E+047 Layers above q= 0.99997419576963187 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.687500000000 max vel inside fraction of cutoff 1829.8443625346190 max c/cs inside fraction of cutoff 0.65512552530957546 average v/vesc outside cutoff 0.96062655993593316 Kinetic plus potential energy outside cutoff 5.8266461699126059E+047 mass inside cutoff 1406 51.606453224561008 relax counter 0 log max v [km/s]= 4.2657970922871566 check gamma integral -1.6325817426453615E-002 retry: logT > hydro_mtx_max_allowed_logT 859 2892 retry: logT > hydro_mtx_max_allowed_logT 857 2896 retry: logT < hydro_mtx_min_allowed_logT 856 2900 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 9.397443 2.694E+05 -12.251980 13.679518 51.607785 0.000000 0.000000 0.000000 0.214015 -1.356532 2565 161 -9.9864E+00 9.397443 -0.239886 9.373601 13.471375 -99.000000 51.607785 0.000000 0.034906 0.785985 0.619078 5 2.8823E+05 5.903695 6.196676 13.679497 13.894356 -7.070601 49.121146 0.000005 0.000001 0.436189 -0.804E+01 retry log_rel_run_E_err -7.9980840775201170 rel_E_err 8.4660078122835353D-12 save LOGS/profile32.data for model 2900 save photos/x900 for model 2900 k, q, energy_removed_layers before adjustment is 1294 0.99999292252488736 4.2183120307672875E+047 k, q, energy_removed_layers after adjustment is 1407 0.99997385087461810 5.8632253980457011E+047 Layers above q= 0.99997385087461810 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.732421875000 max vel inside fraction of cutoff 1832.7563336469771 max c/cs inside fraction of cutoff 0.65642007299631977 average v/vesc outside cutoff 0.96084811165025430 Kinetic plus potential energy outside cutoff 5.8632253980457011E+047 mass inside cutoff 1407 51.606435425293313 relax counter 0 log max v [km/s]= 4.2720896883646695 check gamma integral -1.6315033019696994E-002 retry: logT > hydro_mtx_max_allowed_logT 857 2906 retry: logT < hydro_mtx_min_allowed_logT 847 2908 2910 9.397123 2.694E+05 -12.260134 13.671452 51.607785 0.000000 0.000000 0.000000 0.214015 -1.357711 2565 163 -9.7966E+00 9.397123 -0.239954 9.369934 13.468975 -99.000000 51.607785 0.000000 0.034906 0.785985 0.619032 6 2.8823E+05 5.902637 6.196382 13.671430 13.881510 -7.070186 49.121146 0.000005 0.000001 0.436188 -0.805E+01 max increase log_rel_run_E_err -7.9943277725395658 rel_E_err 9.0151920753864800D-12 k, q, energy_removed_layers before adjustment is 1296 0.99999277478371262 4.2804978105087751E+047 k, q, energy_removed_layers after adjustment is 1409 0.99997312750861800 5.9095470121932442E+047 Layers above q= 0.99997312750861800 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.783203125000 max vel inside fraction of cutoff 1836.4432875468535 max c/cs inside fraction of cutoff 0.65806114329315335 average v/vesc outside cutoff 0.95931893606224694 Kinetic plus potential energy outside cutoff 5.9095470121932442E+047 mass inside cutoff 1409 51.606398093976360 relax counter 0 log max v [km/s]= 4.2825495292762481 check gamma integral -1.6301232732750984E-002 retry: logT < hydro_mtx_min_allowed_logT 845 2912 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 900 2916 2920 9.396795 2.694E+05 -12.269663 13.663221 51.607785 0.000000 0.000000 0.000000 0.214015 -1.358915 2565 165 -9.6069E+00 9.396795 -0.240024 9.366190 13.466523 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618985 6 2.8823E+05 5.901557 6.196081 13.663199 13.868391 -7.069762 49.121146 0.000005 0.000001 0.436186 -0.807E+01 max increase log_rel_run_E_err -7.9905580156956644 rel_E_err 8.9344928590156053D-12 k, q, energy_removed_layers before adjustment is 1298 0.99999262473619877 4.3417978286127313E+047 k, q, energy_removed_layers after adjustment is 1410 0.99997274848690465 5.9566818964787524E+047 Layers above q= 0.99997274848690465 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.835937500000 max vel inside fraction of cutoff 1840.1963114154596 max c/cs inside fraction of cutoff 0.65973390019696765 average v/vesc outside cutoff 0.96011372578605858 Kinetic plus potential energy outside cutoff 5.9566818964787524E+047 mass inside cutoff 1410 51.606378533505293 relax counter 0 log max v [km/s]= 4.2918682926937821 check gamma integral -1.6287015841276342E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 844 2923 retry: logT < hydro_mtx_min_allowed_logT 840 2926 retry: logT > hydro_mtx_max_allowed_logT 838 2930 2930 9.396290 2.693E+05 -12.284573 13.650530 51.607785 0.000000 0.000000 0.000000 0.214015 -1.360773 2573 168 -9.7182E+00 9.396290 -0.240131 9.360410 13.462737 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618913 5 2.8823E+05 5.899890 6.195614 13.650508 13.848137 -7.069109 49.121146 0.000005 0.000001 0.436184 -0.809E+01 retry log_rel_run_E_err -7.9868877290110785 rel_E_err 8.5390419588697283D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999247165601768 4.4361602776955180E+047 k, q, energy_removed_layers after adjustment is 1419 0.99997236500714293 6.0287750742220687E+047 Layers above q= 0.99997236500714293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.917968750000 max vel inside fraction of cutoff 1845.9656375620571 max c/cs inside fraction of cutoff 0.66230990539937662 average v/vesc outside cutoff 0.96290664004593363 Kinetic plus potential energy outside cutoff 6.0287750742220687E+047 mass inside cutoff 1419 51.606358742964225 relax counter 0 log max v [km/s]= 4.3008971089785799 check gamma integral -1.6264824771623509E-002 retry: logT < hydro_mtx_min_allowed_logT 846 2932 retry: logT < hydro_mtx_min_allowed_logT 884 2935 retry: logT < hydro_mtx_min_allowed_logT 832 2938 2940 9.395992 2.693E+05 -12.293956 13.643047 51.607785 0.000000 0.000000 0.000000 0.214015 -1.361871 2573 171 -9.8294E+00 9.395992 -0.240194 9.356999 13.460501 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618871 6 2.8823E+05 5.898906 6.195338 13.643024 13.836179 -7.068722 49.121146 0.000005 0.000001 0.436183 -0.810E+01 max increase log_rel_run_E_err -7.9832152134122500 rel_E_err 8.5467953941547174D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999234015223437 4.4955962838820319E+047 k, q, energy_removed_layers after adjustment is 1419 0.99997236500714293 6.0708140873243781E+047 Layers above q= 0.99997236500714293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.966796875000 max vel inside fraction of cutoff 1849.3582843383927 max c/cs inside fraction of cutoff 0.66382723619980899 average v/vesc outside cutoff 0.96635630945687756 Kinetic plus potential energy outside cutoff 6.0708140873243781E+047 mass inside cutoff 1419 51.606358742964225 relax counter 0 log max v [km/s]= 4.3009258101910870 check gamma integral -1.6251586000315666E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 829 2941 retry: logT > hydro_mtx_max_allowed_logT 826 2946 retry: logT < hydro_mtx_min_allowed_logT 823 2950 2950 9.395727 2.693E+05 -12.301771 13.636382 51.607785 0.000000 0.000000 0.000000 0.214015 -1.362849 2573 174 -9.9407E+00 9.395727 -0.240251 9.353959 13.458508 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618833 5 2.8823E+05 5.898029 6.195092 13.636359 13.825521 -7.068375 49.121146 0.000005 0.000001 0.436182 -0.811E+01 retry log_rel_run_E_err -7.9796305082725798 rel_E_err 8.5046051662488779D-12 save photos/x950 for model 2950 k, q, energy_removed_layers before adjustment is 1309 0.99999234015223437 4.5178677511843968E+047 k, q, energy_removed_layers after adjustment is 1420 0.99997197687574224 6.1074295318689359E+047 Layers above q= 0.99997197687574224 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.009765625000 max vel inside fraction of cutoff 1852.3737189769847 max c/cs inside fraction of cutoff 0.66517745108818704 average v/vesc outside cutoff 0.96722558287988825 Kinetic plus potential energy outside cutoff 6.1074295318689359E+047 mass inside cutoff 1420 51.606338712362380 relax counter 0 log max v [km/s]= 4.3045409478397900 check gamma integral -1.6239699412289598E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2953 retry: logT < hydro_mtx_min_allowed_logT 822 2958 2960 9.395438 2.693E+05 -12.309216 13.629133 51.607785 0.000000 0.000000 0.000000 0.214015 -1.363914 2573 176 -9.7510E+00 9.395438 -0.240312 9.350650 13.456338 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618791 6 2.8823E+05 5.897074 6.194827 13.629111 13.813921 -7.067997 49.121146 0.000005 0.000001 0.436181 -0.812E+01 max increase log_rel_run_E_err -7.9760368323024853 rel_E_err 8.8536543525249188D-12 k, q, energy_removed_layers before adjustment is 1310 0.99999220656966792 4.5678782584063164E+047 k, q, energy_removed_layers after adjustment is 1420 0.99997197687574224 6.1465014437988615E+047 Layers above q= 0.99997197687574224 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.056640625000 max vel inside fraction of cutoff 1855.6466737932992 max c/cs inside fraction of cutoff 0.66664468319093828 average v/vesc outside cutoff 0.97047236880692678 Kinetic plus potential energy outside cutoff 6.1465014437988615E+047 mass inside cutoff 1420 51.606338712362380 relax counter 0 log max v [km/s]= 4.3060752318115778 check gamma integral -1.6226668540805893E-002 retry: logT < hydro_mtx_min_allowed_logT 814 2962 retry: logT < hydro_mtx_min_allowed_logT 811 2965 retry: logT > hydro_mtx_max_allowed_logT 809 2969 2970 9.395142 2.692E+05 -12.319019 13.621713 51.607785 0.000000 0.000000 0.000000 0.214015 -1.365005 2573 179 -9.8622E+00 9.395142 -0.240375 9.347261 13.454115 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618749 5 2.8823E+05 5.896096 6.194555 13.621690 13.802035 -7.067611 49.121146 0.000005 0.000001 0.436180 -0.813E+01 max increase log_rel_run_E_err -7.9725066117689343 rel_E_err 8.4108258129819357D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999209132242528 4.6165266871656277E+047 k, q, energy_removed_layers after adjustment is 1420 0.99997197687574224 6.1856237887791674E+047 Layers above q= 0.99997197687574224 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.103515625000 max vel inside fraction of cutoff 1858.9903289005374 max c/cs inside fraction of cutoff 0.66814544838043566 average v/vesc outside cutoff 0.97375993603475819 Kinetic plus potential energy outside cutoff 6.1856237887791674E+047 mass inside cutoff 1420 51.606338712362380 relax counter 0 log max v [km/s]= 4.3052694983020290 check gamma integral -1.6213216282694426E-002 retry: logT < hydro_mtx_min_allowed_logT 840 2972 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 804 2976 2980 9.394857 2.692E+05 -12.326357 13.614598 51.607785 0.000000 0.000000 0.000000 0.214015 -1.366052 2573 181 -9.6725E+00 9.394857 -0.240435 9.344008 13.451981 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618708 6 2.8823E+05 5.895158 6.194295 13.614575 13.790629 -7.067243 49.121146 0.000005 0.000001 0.436179 -0.814E+01 max increase log_rel_run_E_err -7.9689916107580876 rel_E_err 8.6251608432239497D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999197461911182 4.6651133825354976E+047 k, q, energy_removed_layers after adjustment is 1420 0.99997197687574224 6.2226375224947263E+047 Layers above q= 0.99997197687574224 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.150390625000 max vel inside fraction of cutoff 1862.1898118601248 max c/cs inside fraction of cutoff 0.66958324497211086 average v/vesc outside cutoff 0.97688576847603936 Kinetic plus potential energy outside cutoff 6.2226375224947263E+047 mass inside cutoff 1420 51.606338712362380 relax counter 0 log max v [km/s]= 4.3070326144130009 check gamma integral -1.6200210490685714E-002 retry: logT < hydro_mtx_min_allowed_logT 799 2982 retry: logT < hydro_mtx_min_allowed_logT 796 2986 2990 9.394417 2.692E+05 -12.339199 13.603573 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2573 183 -9.4827E+00 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 8 2.8823E+05 5.893703 6.193890 13.603549 13.772937 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9654541510426098 rel_E_err 8.5448261341126985D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999185264425672 4.7260895611569667E+047 k, q, energy_removed_layers after adjustment is 1420 0.99997197687574224 6.2785654220384672E+047 Layers above q= 0.99997197687574224 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1343175883026 max c/cs inside fraction of cutoff 0.67180864038818755 average v/vesc outside cutoff 0.98166718054444002 Kinetic plus potential energy outside cutoff 6.2785654220384672E+047 mass inside cutoff 1420 51.606338712362380 relax counter 0 log max v [km/s]= 4.3097144113920871 check gamma integral -1.6179851873957773E-002 retry: logT > hydro_mtx_max_allowed_logT 806 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: logT < hydro_mtx_min_allowed_logT 793 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2991 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 retry: adjust_correction failed in eval_equations -- give up in solver 2992 hydro_solver_step returned ierr -1 s% model_number 2992 nz 2573 s% num_retries 203 retry: logT < hydro_mtx_min_allowed_logT 793 2992 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 9.394417 2.692E+05 -12.340271 13.603573 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2215 204 -1.5013E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893703 6.193890 13.603549 13.772936 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9620138535911584 rel_E_err 8.7106839542361087D-12 save LOGS/profile33.data for model 3000 save photos/3000 for model 3000 k, q, energy_removed_layers before adjustment is 955 0.99999185264425683 4.7261369889675489E+047 k, q, energy_removed_layers after adjustment is 1062 0.99997197687574235 6.2786133816066109E+047 Layers above q= 0.99997197687574235 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1344333493985 max c/cs inside fraction of cutoff 0.67180869253780306 average v/vesc outside cutoff 0.98171148301799638 Kinetic plus potential energy outside cutoff 6.2786133816066109E+047 mass inside cutoff 1062 51.606338712362380 relax counter 0 log max v [km/s]= 4.3010300291198575 check gamma integral -1.6179851393973203E-002 3010 9.394417 2.692E+05 -12.340500 13.603572 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2528 204 -1.4221E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893703 6.193890 13.603549 13.772936 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9586093545626575 rel_E_err 8.4187736702834216D-12 k, q, energy_removed_layers before adjustment is 1268 0.99999185264425450 4.7266172793635333E+047 k, q, energy_removed_layers after adjustment is 1375 0.99997197687574002 6.2790939758776436E+047 Layers above q= 0.99997197687574002 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1344995733762 max c/cs inside fraction of cutoff 0.67180872237859035 average v/vesc outside cutoff 0.98178144502165032 Kinetic plus potential energy outside cutoff 6.2790939758776436E+047 mass inside cutoff 1375 51.606338712362259 relax counter 0 log max v [km/s]= 4.3008831758664101 check gamma integral -1.6179851118035233E-002 retry: logT < hydro_mtx_min_allowed_logT 796 3017 retry: logT < hydro_mtx_min_allowed_logT 796 3018 3020 9.394417 2.692E+05 -12.340640 13.603572 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2608 206 -1.4031E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603548 13.772935 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9551990445444831 rel_E_err 8.6176191239102910D-12 k, q, energy_removed_layers before adjustment is 1348 0.99999185264425461 4.7266190057388498E+047 k, q, energy_removed_layers after adjustment is 1455 0.99997197687574013 6.2790967676415701E+047 Layers above q= 0.99997197687574013 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1347315145210 max c/cs inside fraction of cutoff 0.67180882686696541 average v/vesc outside cutoff 0.98178167298470032 Kinetic plus potential energy outside cutoff 6.2790967676415701E+047 mass inside cutoff 1455 51.606338712362273 relax counter 0 log max v [km/s]= 4.3008838181632676 check gamma integral -1.6179850155309167E-002 retry: logT < hydro_mtx_min_allowed_logT 797 3022 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3023 retry: logT > hydro_mtx_max_allowed_logT 797 3025 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3026 retry: adjust_correction failed in eval_equations -- give up in solver 3027 retry: adjust_correction failed in eval_equations -- give up in solver 3028 retry: logT < hydro_mtx_min_allowed_logT 797 3028 3030 9.394417 2.692E+05 -12.340649 13.603572 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2608 213 -1.5346E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893702 6.193890 13.603548 13.772935 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9518224614721014 rel_E_err 8.6509750348503708D-12 k, q, energy_removed_layers before adjustment is 1348 0.99999185264425461 4.7266195520947430E+047 k, q, energy_removed_layers after adjustment is 1455 0.99997197687574013 6.2790976512134058E+047 Layers above q= 0.99997197687574013 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1348049148285 max c/cs inside fraction of cutoff 0.67180885993595718 average v/vesc outside cutoff 0.98178174513110561 Kinetic plus potential energy outside cutoff 6.2790976512134058E+047 mass inside cutoff 1455 51.606338712362273 relax counter 0 log max v [km/s]= 4.3008840214181241 check gamma integral -1.6179849850678482E-002 3040 9.394417 2.692E+05 -12.340652 13.603572 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2604 213 -1.4555E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603548 13.772935 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9484643869185234 rel_E_err 8.5475901434880517D-12 k, q, energy_removed_layers before adjustment is 1344 0.99999185264425472 4.7266197806557248E+047 k, q, energy_removed_layers after adjustment is 1451 0.99997197687574024 6.2790980208853428E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1348356179572 max c/cs inside fraction of cutoff 0.67180887377919118 average v/vesc outside cutoff 0.98178177532495559 Kinetic plus potential energy outside cutoff 6.2790980208853428E+047 mass inside cutoff 1451 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008841064380867 check gamma integral -1.6179849724026054E-002 3050 9.394417 2.692E+05 -12.340659 13.603571 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2602 213 -1.3763E+01 9.394417 -0.240529 9.338964 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603548 13.772934 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9450851536716822 rel_E_err 8.6800923507407299D-12 save photos/x050 for model 3050 k, q, energy_removed_layers before adjustment is 1342 0.99999185264425472 4.7266211956460585E+047 k, q, energy_removed_layers after adjustment is 1449 0.99997197687574024 6.2791003091148852E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1350257236275 max c/cs inside fraction of cutoff 0.67180895941511998 average v/vesc outside cutoff 0.98178196216784475 Kinetic plus potential energy outside cutoff 6.2791003091148852E+047 mass inside cutoff 1449 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008846328444132 check gamma integral -1.6179848936045606E-002 retry: logT > hydro_mtx_max_allowed_logT 797 3053 retry: logT > hydro_mtx_max_allowed_logT 796 3053 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 retry: adjust_correction failed in eval_equations -- give up in solver 3056 retry: logT < hydro_mtx_min_allowed_logT 796 3056 3060 9.394417 2.692E+05 -12.340660 13.603571 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2602 224 -1.6282E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772934 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9418074556199612 rel_E_err 9.0317115576962461D-12 k, q, energy_removed_layers before adjustment is 1342 0.99999185264425472 4.7266223834900111E+047 k, q, energy_removed_layers after adjustment is 1449 0.99997197687574024 6.2791022300289163E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1351853110341 max c/cs inside fraction of cutoff 0.67180903131082048 average v/vesc outside cutoff 0.98178211901795276 Kinetic plus potential energy outside cutoff 6.2791022300289163E+047 mass inside cutoff 1449 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008850747261205 check gamma integral -1.6179848273030647E-002 3070 9.394417 2.692E+05 -12.340660 13.603571 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2602 224 -1.5490E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772934 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9385183506546326 rel_E_err 8.8577448235828814D-12 k, q, energy_removed_layers before adjustment is 1342 0.99999185264425472 4.7266224100147622E+047 k, q, energy_removed_layers after adjustment is 1449 0.99997197687574024 6.2791022729906433E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1351888697227 max c/cs inside fraction of cutoff 0.67180903292157423 average v/vesc outside cutoff 0.98178212252877506 Kinetic plus potential energy outside cutoff 6.2791022729906433E+047 mass inside cutoff 1449 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008850845796314 check gamma integral -1.6179848258616836E-002 3080 9.394417 2.692E+05 -12.340660 13.603571 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 224 -1.4699E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9352821697701339 rel_E_err 8.9108194215143646D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266225740544817E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791025383261123E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1352109041850 max c/cs inside fraction of cutoff 0.67180904285466303 average v/vesc outside cutoff 0.98178214419696785 Kinetic plus potential energy outside cutoff 6.2791025383261123E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008851455897679 check gamma integral -1.6179848166121509E-002 3090 9.394417 2.692E+05 -12.340661 13.603571 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 224 -1.3907E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9320624852561998 rel_E_err 8.4959898460653473D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266235895499632E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791041805393673E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1353473357631 max c/cs inside fraction of cutoff 0.67180910432443586 average v/vesc outside cutoff 0.98178227829073761 Kinetic plus potential energy outside cutoff 6.2791041805393673E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008855233407370 check gamma integral -1.6179847600859023E-002 retry: logT < hydro_mtx_min_allowed_logT 796 3092 retry: logT < hydro_mtx_min_allowed_logT 796 3092 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3093 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3094 retry: logT < hydro_mtx_min_allowed_logT 796 3094 retry: logT < hydro_mtx_min_allowed_logT 796 3096 retry: logT < hydro_mtx_min_allowed_logT 797 3098 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: adjust_correction failed in eval_equations -- give up in solver 3100 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3100 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 240 -1.7932E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 9 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.9288336386347229 rel_E_err 8.9104508501053201D-12 save LOGS/profile34.data for model 3100 save photos/x100 for model 3100 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240119749906E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791048637056877E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354040855638 max c/cs inside fraction of cutoff 0.67180912988596386 average v/vesc outside cutoff 0.98178233407302995 Kinetic plus potential energy outside cutoff 6.2791048637056877E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856804655924 check gamma integral -1.6179847365032952E-002 3110 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 240 -1.7140E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9256934066041005 rel_E_err 8.2613927569963762D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240126062676E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791048647948003E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354041653744 max c/cs inside fraction of cutoff 0.67180912993070563 average v/vesc outside cutoff 0.98178233416490768 Kinetic plus potential energy outside cutoff 6.2791048647948003E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856806865650 check gamma integral -1.6179847365222735E-002 3120 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 240 -1.6348E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9224933438524152 rel_E_err 8.7346412486959602D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240163220407E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791048708729598E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354046595400 max c/cs inside fraction of cutoff 0.67180913016301558 average v/vesc outside cutoff 0.98178233466404707 Kinetic plus potential energy outside cutoff 6.2791048708729598E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856820547692 check gamma integral -1.6179847363481870E-002 3130 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 240 -1.5556E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9193624120417381 rel_E_err 8.5697045674293271D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240391331962E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049078295010E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354077192816 max c/cs inside fraction of cutoff 0.67180913154765987 average v/vesc outside cutoff 0.98178233768446288 Kinetic plus potential energy outside cutoff 6.2791049078295010E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856905263269 check gamma integral -1.6179847350298027E-002 retry: logT < hydro_mtx_min_allowed_logT 797 3132 hydro_solver_step returned ierr -1 s% model_number 3132 nz 2603 s% num_retries 241 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 hydro_solver_step returned ierr -1 s% model_number 3132 nz 2603 s% num_retries 245 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: logT < hydro_mtx_min_allowed_logT 797 3132 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3132 retry: logT > hydro_mtx_max_allowed_logT 797 3132 retry: logT > hydro_mtx_max_allowed_logT 797 3132 3140 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 254 -1.8979E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9162938607762392 rel_E_err 8.5322943486600707D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240446110532E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049167569951E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354084502113 max c/cs inside fraction of cutoff 0.67180913188199387 average v/vesc outside cutoff 0.98178233841581175 Kinetic plus potential energy outside cutoff 6.2791049167569951E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856925500636 check gamma integral -1.6179847347098431E-002 3150 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 254 -1.8187E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9131421137808617 rel_E_err 8.9764255268059677D-12 save photos/x150 for model 3150 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240447011955E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049169708804E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354084573707 max c/cs inside fraction of cutoff 0.67180913189468194 average v/vesc outside cutoff 0.98178233843620966 Kinetic plus potential energy outside cutoff 6.2791049169708804E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856925698860 check gamma integral -1.6179847346853526E-002 3160 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 254 -1.7395E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9100764836650743 rel_E_err 9.1830110254665394D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240450682998E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049176328423E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354085017010 max c/cs inside fraction of cutoff 0.67180913192227665 average v/vesc outside cutoff 0.98178233849317476 Kinetic plus potential energy outside cutoff 6.2791049176328423E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856926926242 check gamma integral -1.6179847346506862E-002 3170 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 254 -1.6603E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9070216035268546 rel_E_err 8.6439721490457785D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240471487210E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049210656855E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354087761833 max c/cs inside fraction of cutoff 0.67180913205892567 average v/vesc outside cutoff 0.98178233877638643 Kinetic plus potential energy outside cutoff 6.2791049210656855E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856934525879 check gamma integral -1.6179847346618738E-002 3180 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 254 -1.5811E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.9039551295270334 rel_E_err 8.7691028840540434D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240598356408E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049416502349E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354104757067 max c/cs inside fraction of cutoff 0.67180913282855748 average v/vesc outside cutoff 0.98178234046004942 Kinetic plus potential energy outside cutoff 6.2791049416502349E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008856981580825 check gamma integral -1.6179847338653512E-002 retry: logT < hydro_mtx_min_allowed_logT 797 3185 retry: logT > hydro_mtx_max_allowed_logT 797 3187 retry: logT < hydro_mtx_min_allowed_logT 796 3189 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3190 3190 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2603 258 -1.6224E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.9009198710800321 rel_E_err 8.6996267628695820D-12 k, q, energy_removed_layers before adjustment is 1343 0.99999185264425472 4.7266240905010710E+047 k, q, energy_removed_layers after adjustment is 1450 0.99997197687574024 6.2791049913072924E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354145907553 max c/cs inside fraction of cutoff 0.67180913468753312 average v/vesc outside cutoff 0.98178234451650315 Kinetic plus potential energy outside cutoff 6.2791049913072924E+047 mass inside cutoff 1450 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008857095514683 check gamma integral -1.6179847321235195E-002 retry: logT < hydro_mtx_min_allowed_logT 797 3191 retry: logT < hydro_mtx_min_allowed_logT 797 3191 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2604 260 -1.6034E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8978975804996825 rel_E_err 8.8746992195314606D-12 save LOGS/profile35.data for model 3200 save photos/x200 for model 3200 k, q, energy_removed_layers before adjustment is 1344 0.99999185264425472 4.7266240981162209E+047 k, q, energy_removed_layers after adjustment is 1451 0.99997197687574024 6.2791050036906941E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354156088123 max c/cs inside fraction of cutoff 0.67180913515517859 average v/vesc outside cutoff 0.98178234552992161 Kinetic plus potential energy outside cutoff 6.2791050036906941E+047 mass inside cutoff 1451 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008857123701736 check gamma integral -1.6179847316879024E-002 retry: logT < hydro_mtx_min_allowed_logT 798 3208 3210 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2605 261 -1.5543E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8949280335522900 rel_E_err 8.4114022159382210D-12 k, q, energy_removed_layers before adjustment is 1345 0.99999185264425472 4.7266241332842292E+047 k, q, energy_removed_layers after adjustment is 1452 0.99997197687574024 6.2791050606294271E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354203287658 max c/cs inside fraction of cutoff 0.67180913728650671 average v/vesc outside cutoff 0.98178235018151561 Kinetic plus potential energy outside cutoff 6.2791050606294271E+047 mass inside cutoff 1452 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008857254383486 check gamma integral -1.6179847297960060E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3217 3220 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2606 262 -1.5052E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8919980260943259 rel_E_err 8.4093750619524701D-12 k, q, energy_removed_layers before adjustment is 1346 0.99999185264425472 4.7266242337275902E+047 k, q, energy_removed_layers after adjustment is 1453 0.99997197687574024 6.2791052231246168E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354338187346 max c/cs inside fraction of cutoff 0.67180914337244801 average v/vesc outside cutoff 0.98178236345210135 Kinetic plus potential energy outside cutoff 6.2791052231246168E+047 mass inside cutoff 1453 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008857627880541 check gamma integral -1.6179847241709604E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3223 retry: adjust_correction failed in eval_equations -- give up in solver 3224 retry: logT < hydro_mtx_min_allowed_logT 800 3224 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3225 retry: logT > hydro_mtx_max_allowed_logT 800 3225 3230 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2606 267 -1.5766E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8890786892224138 rel_E_err 8.4213537044294484D-12 k, q, energy_removed_layers before adjustment is 1346 0.99999185264425472 4.7266242992355464E+047 k, q, energy_removed_layers after adjustment is 1453 0.99997197687574024 6.2791053291260167E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354426149628 max c/cs inside fraction of cutoff 0.67180914733902319 average v/vesc outside cutoff 0.98178237210936314 Kinetic plus potential energy outside cutoff 6.2791053291260167E+047 mass inside cutoff 1453 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008857871421240 check gamma integral -1.6179847204908032E-002 3240 9.394417 2.692E+05 -12.340661 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2614 267 -1.4974E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8861060792812951 rel_E_err 9.0072014288894911D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425472 4.7266243862808221E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574024 6.2791054699546480E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354543048944 max c/cs inside fraction of cutoff 0.67180915261455354 average v/vesc outside cutoff 0.98178238361129044 Kinetic plus potential energy outside cutoff 6.2791054699546480E+047 mass inside cutoff 1461 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008858195078998 check gamma integral -1.6179847155702275E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 799 3246 retry: logT > hydro_mtx_max_allowed_logT 798 3247 retry: logT > hydro_mtx_max_allowed_logT 799 3248 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3249 3250 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2615 271 -1.5386E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193890 13.603547 13.772933 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8833047079496348 rel_E_err 8.3822849053095642D-12 save photos/x250 for model 3250 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425472 4.7266246001347310E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574024 6.2791058158429367E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354830322505 max c/cs inside fraction of cutoff 0.67180916556211656 average v/vesc outside cutoff 0.98178241185522808 Kinetic plus potential energy outside cutoff 6.2791058158429367E+047 mass inside cutoff 1462 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008858990445837 check gamma integral -1.6179847037489020E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3254 retry: logT > hydro_mtx_max_allowed_logT 800 3255 retry: logT > hydro_mtx_max_allowed_logT 800 3256 retry: logT < hydro_mtx_min_allowed_logT 801 3256 retry: logT < hydro_mtx_min_allowed_logT 800 3257 3260 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2615 276 -1.6100E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603547 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8804438691865188 rel_E_err 8.5979004571158626D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425472 4.7266246457799466E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574024 6.2791058897242049E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354891598769 max c/cs inside fraction of cutoff 0.67180916832124082 average v/vesc outside cutoff 0.98178241788958964 Kinetic plus potential energy outside cutoff 6.2791058897242049E+047 mass inside cutoff 1462 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008859160099195 check gamma integral -1.6179847012072774E-002 3270 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2619 276 -1.5308E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603547 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8776081706880587 rel_E_err 8.5291614830429615D-12 k, q, energy_removed_layers before adjustment is 1359 0.99999185264425472 4.7266246861565418E+047 k, q, energy_removed_layers after adjustment is 1466 0.99997197687574024 6.2791059550857286E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1354945796290 max c/cs inside fraction of cutoff 0.67180917077128222 average v/vesc outside cutoff 0.98178242322931475 Kinetic plus potential energy outside cutoff 6.2791059550857286E+047 mass inside cutoff 1466 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008859310153689 check gamma integral -1.6179846989636485E-002 3280 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2621 276 -1.4516E+01 9.394417 -0.240529 9.338963 13.448669 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8747628718315310 rel_E_err 8.4160093912614381D-12 k, q, energy_removed_layers before adjustment is 1361 0.99999185264425472 4.7266249359629258E+047 k, q, energy_removed_layers after adjustment is 1468 0.99997197687574024 6.2791063591131963E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1355281373042 max c/cs inside fraction of cutoff 0.67180918590012018 average v/vesc outside cutoff 0.98178245622209925 Kinetic plus potential energy outside cutoff 6.2791063591131963E+047 mass inside cutoff 1468 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008860239246847 check gamma integral -1.6179846849835269E-002 retry: logT < hydro_mtx_min_allowed_logT 799 3282 retry: adjust_correction failed in eval_equations -- give up in solver 3283 retry: logT > hydro_mtx_max_allowed_logT 799 3283 retry: logT < hydro_mtx_min_allowed_logT 800 3284 retry: logT > hydro_mtx_max_allowed_logT 801 3288 retry: adjust_correction failed in eval_equations -- give up in solver 3289 3290 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367677 2621 282 -1.5530E+01 9.394417 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8719694318973223 rel_E_err 8.5870275385830862D-12 k, q, energy_removed_layers before adjustment is 1361 0.99999185264425472 4.7266250915442931E+047 k, q, energy_removed_layers after adjustment is 1468 0.99997197687574024 6.2791066107693296E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1355490354592 max c/cs inside fraction of cutoff 0.67180919531652417 average v/vesc outside cutoff 0.98178247677141284 Kinetic plus potential energy outside cutoff 6.2791066107693296E+047 mass inside cutoff 1468 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008860817838972 check gamma integral -1.6179846762877370E-002 retry: logT < hydro_mtx_min_allowed_logT 801 3293 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3295 retry: logT < hydro_mtx_min_allowed_logT 801 3295 retry: logT < hydro_mtx_min_allowed_logT 801 3296 retry: logT > hydro_mtx_max_allowed_logT 801 3296 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 9.394417 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2621 287 -1.6244E+01 9.394417 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8691682565286758 rel_E_err 8.6251749060811412D-12 save LOGS/profile36.data for model 3300 save photos/x300 for model 3300 k, q, energy_removed_layers before adjustment is 1361 0.99999185264425472 4.7266251182204719E+047 k, q, energy_removed_layers after adjustment is 1468 0.99997197687574024 6.2791066539756520E+047 Layers above q= 0.99997197687574024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1355526145348 max c/cs inside fraction of cutoff 0.67180919693271013 average v/vesc outside cutoff 0.98178248030070314 Kinetic plus potential energy outside cutoff 6.2791066539756520E+047 mass inside cutoff 1468 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008860916930001 check gamma integral -1.6179846747427482E-002 3310 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2618 287 -1.5452E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8663885161289482 rel_E_err 8.5802089286511264D-12 k, q, energy_removed_layers before adjustment is 1358 0.99999185264425483 4.7266251472079652E+047 k, q, energy_removed_layers after adjustment is 1465 0.99997197687574035 6.2791067009202106E+047 Layers above q= 0.99997197687574035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1355565040842 max c/cs inside fraction of cutoff 0.67180919869733513 average v/vesc outside cutoff 0.98178248413665314 Kinetic plus potential energy outside cutoff 6.2791067009202106E+047 mass inside cutoff 1465 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008861024616785 check gamma integral -1.6179846732182705E-002 3320 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2618 287 -1.4660E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8636515958063464 rel_E_err 8.6474736099620247D-12 k, q, energy_removed_layers before adjustment is 1358 0.99999185264425483 4.7266253264954899E+047 k, q, energy_removed_layers after adjustment is 1465 0.99997197687574035 6.2791069909132759E+047 Layers above q= 0.99997197687574035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1355805871492 max c/cs inside fraction of cutoff 0.67180920954935908 average v/vesc outside cutoff 0.98178250781810406 Kinetic plus potential energy outside cutoff 6.2791069909132759E+047 mass inside cutoff 1465 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008861691382556 check gamma integral -1.6179846632170945E-002 retry: logT < hydro_mtx_min_allowed_logT 799 3329 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3329 retry: logT > hydro_mtx_max_allowed_logT 804 3330 3330 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2618 290 -1.4771E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.8608998417874894 rel_E_err 8.6211205992336162D-12 k, q, energy_removed_layers before adjustment is 1358 0.99999185264425483 4.7266261054886466E+047 k, q, energy_removed_layers after adjustment is 1465 0.99997197687574035 6.2791082506810430E+047 Layers above q= 0.99997197687574035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1356852436891 max c/cs inside fraction of cutoff 0.67180925670311242 average v/vesc outside cutoff 0.98178261068335682 Kinetic plus potential energy outside cutoff 6.2791082506810430E+047 mass inside cutoff 1465 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008864588864633 check gamma integral -1.6179846198740293E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 799 3331 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3333 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3334 retry: logT < hydro_mtx_min_allowed_logT 800 3336 retry: logT < hydro_mtx_min_allowed_logT 800 3336 hydro_solver_step returned ierr -1 s% model_number 3336 nz 2618 s% num_retries 295 retry: logT < hydro_mtx_min_allowed_logT 800 3336 retry: logT < hydro_mtx_min_allowed_logT 800 3336 retry: adjust_correction failed in eval_equations -- give up in solver 3336 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3336 retry: logT < hydro_mtx_min_allowed_logT 800 3336 3340 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2618 300 -1.6990E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8582061826279377 rel_E_err 8.4777454727732226D-12 k, q, energy_removed_layers before adjustment is 1358 0.99999185264425483 4.7266261701621763E+047 k, q, energy_removed_layers after adjustment is 1465 0.99997197687574035 6.2791083553324077E+047 Layers above q= 0.99997197687574035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1356939278769 max c/cs inside fraction of cutoff 0.67180926062292146 average v/vesc outside cutoff 0.98178261922962218 Kinetic plus potential energy outside cutoff 6.2791083553324077E+047 mass inside cutoff 1465 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008864829288891 check gamma integral -1.6179846162336548E-002 3350 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 300 -1.6198E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8555040563144658 rel_E_err 8.6034290683381322D-12 save photos/x350 for model 3350 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425483 4.7266261753938105E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574035 6.2791083638616996E+047 Layers above q= 0.99997197687574035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1356946257222 max c/cs inside fraction of cutoff 0.67180926094362869 average v/vesc outside cutoff 0.98178261992890159 Kinetic plus potential energy outside cutoff 6.2791083638616996E+047 mass inside cutoff 1463 51.606338712362280 relax counter 0 log max v [km/s]= 4.3008864848608921 check gamma integral -1.6179846159140213E-002 3360 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 300 -1.5406E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8528165397212470 rel_E_err 9.2580157683238913D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266262075913236E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791084159967354E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1356989465964 max c/cs inside fraction of cutoff 0.67180926289681131 average v/vesc outside cutoff 0.98178262419503415 Kinetic plus potential energy outside cutoff 6.2791084159967354E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008864968233391 check gamma integral -1.6179846140684389E-002 3370 9.394416 2.692E+05 -12.340662 13.603570 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 300 -1.4614E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193890 13.603546 13.772932 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8501254085405128 rel_E_err 8.6865424149150249D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425494 4.7266264067560697E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574046 6.2791087381325959E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1357257003110 max c/cs inside fraction of cutoff 0.67180927495371845 average v/vesc outside cutoff 0.98178265050105473 Kinetic plus potential energy outside cutoff 6.2791087381325959E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008865708913593 check gamma integral -1.6179846030007994E-002 3380 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 300 -1.3823E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603546 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8474441924493128 rel_E_err 8.7009167862930443D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425494 4.7266276397357478E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574046 6.2791107320363552E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1358913522506 max c/cs inside fraction of cutoff 0.67180934958251592 average v/vesc outside cutoff 0.98178281331145445 Kinetic plus potential energy outside cutoff 6.2791107320363552E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008870294895223 check gamma integral -1.6179845342276743E-002 retry: logT < hydro_mtx_min_allowed_logT 799 3383 retry: logT < hydro_mtx_min_allowed_logT 799 3384 retry: logT > hydro_mtx_max_allowed_logT 800 3384 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3384 retry: logT > hydro_mtx_max_allowed_logT 800 3385 retry: adjust_correction failed in eval_equations -- give up in solver 3385 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3387 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 799 3388 3390 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 308 -1.5439E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8448075716299517 rel_E_err 8.3155730969631926D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425494 4.7266285730674063E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574046 6.2791122413832874E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360167450321 max c/cs inside fraction of cutoff 0.67180940607553874 average v/vesc outside cutoff 0.98178293655453086 Kinetic plus potential energy outside cutoff 6.2791122413832874E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008873766196949 check gamma integral -1.6179844822573196E-002 retry: logT < hydro_mtx_min_allowed_logT 801 3394 retry: logT > hydro_mtx_max_allowed_logT 801 3396 retry: logT < hydro_mtx_min_allowed_logT 802 3397 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 311 -1.5550E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8422090996455625 rel_E_err 8.4539724815263262D-12 save LOGS/profile37.data for model 3400 save photos/x400 for model 3400 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425494 4.7266286307163490E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574046 6.2791123346740485E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360244854907 max c/cs inside fraction of cutoff 0.67180940956574464 average v/vesc outside cutoff 0.98178294417331935 Kinetic plus potential energy outside cutoff 6.2791123346740485E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008873980476823 check gamma integral -1.6179844789467154E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3401 retry: logT < hydro_mtx_min_allowed_logT 801 3405 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 hydro_solver_step returned ierr -1 s% model_number 3407 nz 2614 s% num_retries 315 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 hydro_solver_step returned ierr -1 s% model_number 3407 nz 2614 s% num_retries 318 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT < hydro_mtx_min_allowed_logT 801 3407 retry: logT > hydro_mtx_max_allowed_logT 801 3407 3410 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 325 -1.8973E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8396174134178054 rel_E_err 8.7630214392483726D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425494 4.7266286518133366E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574046 6.2791123688585506E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360273149585 max c/cs inside fraction of cutoff 0.67180941084512047 average v/vesc outside cutoff 0.98178294696584301 Kinetic plus potential energy outside cutoff 6.2791123688585506E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874058805171 check gamma integral -1.6179844778347982E-002 3420 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 325 -1.8181E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8370139626158704 rel_E_err 8.6800923817783430D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266286519046821E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791123690745664E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360273222149 max c/cs inside fraction of cutoff 0.67180941085544632 average v/vesc outside cutoff 0.98178294698637625 Kinetic plus potential energy outside cutoff 6.2791123690745664E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874059006041 check gamma integral -1.6179844779283001E-002 3430 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 325 -1.7389E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8344615425909181 rel_E_err 8.3406361041297389D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266286522762137E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791123697435971E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360273671421 max c/cs inside fraction of cutoff 0.67180941088742840 average v/vesc outside cutoff 0.98178294704396596 Kinetic plus potential energy outside cutoff 6.2791123697435971E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874060249758 check gamma integral -1.6179844778021441E-002 3440 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 325 -1.6597E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8318736125976631 rel_E_err 8.4705582961135436D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266286543838335E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791123732206398E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360276453188 max c/cs inside fraction of cutoff 0.67180941101937308 average v/vesc outside cutoff 0.98178294733072380 Kinetic plus potential energy outside cutoff 6.2791123732206398E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874067950549 check gamma integral -1.6179844776741382E-002 3450 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 325 -1.5806E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8293496523156829 rel_E_err 8.0033912686825828D-12 save photos/x450 for model 3450 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266286672411620E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791123940810266E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360293677180 max c/cs inside fraction of cutoff 0.67180941180036913 average v/vesc outside cutoff 0.98178294903690733 Kinetic plus potential energy outside cutoff 6.2791123940810266E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874115631812 check gamma integral -1.6179844769381953E-002 retry: logT < hydro_mtx_min_allowed_logT 801 3458 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3459 retry: logT < hydro_mtx_min_allowed_logT 801 3460 3460 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 328 -1.5917E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.8268018744402577 rel_E_err 8.7316926877303991D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425494 4.7266287175108782E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574046 6.2791124754408217E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360361166192 max c/cs inside fraction of cutoff 0.67180941484650447 average v/vesc outside cutoff 0.98178295568191265 Kinetic plus potential energy outside cutoff 6.2791124754408217E+047 mass inside cutoff 1463 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874302461768 check gamma integral -1.6179844742102122E-002 3470 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 328 -1.5125E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772931 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8242477242847306 rel_E_err 8.5234486088715238D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425494 4.7266287789833301E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574046 6.2791125749163759E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360443707003 max c/cs inside fraction of cutoff 0.67180941857698750 average v/vesc outside cutoff 0.98178296380720664 Kinetic plus potential energy outside cutoff 6.2791125749163759E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008874530959256 check gamma integral -1.6179844707442378E-002 3480 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 328 -1.4333E+01 9.394416 -0.240529 9.338963 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8217129988451637 rel_E_err 8.3262617378751986D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425494 4.7266291594095572E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574046 6.2791131901688585E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1360954777977 max c/cs inside fraction of cutoff 0.67180944159971945 average v/vesc outside cutoff 0.98178301404695434 Kinetic plus potential energy outside cutoff 6.2791131901688585E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008875945744460 check gamma integral -1.6179844495325335E-002 retry: logT < hydro_mtx_min_allowed_logT 800 3481 retry: logT < hydro_mtx_min_allowed_logT 800 3482 retry: logT > hydro_mtx_max_allowed_logT 801 3483 retry: adjust_correction failed in eval_equations -- give up in solver 3485 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3487 retry: logT < hydro_mtx_min_allowed_logT 801 3489 3490 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 334 -1.5348E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8192448779858585 rel_E_err 9.1861439296816570D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425494 4.7266293229445068E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574046 6.2791134546875110E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1361174445524 max c/cs inside fraction of cutoff 0.67180945149914628 average v/vesc outside cutoff 0.98178303564594294 Kinetic plus potential energy outside cutoff 6.2791134546875110E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008876553839617 check gamma integral -1.6179844404467663E-002 retry: logT < hydro_mtx_min_allowed_logT 802 3494 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3495 retry: logT < hydro_mtx_min_allowed_logT 802 3495 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 337 -1.5459E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8167565510538273 rel_E_err 9.0149414968343031D-12 save LOGS/profile38.data for model 3500 save photos/x500 for model 3500 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425494 4.7266293851105709E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574046 6.2791135552849185E+047 Layers above q= 0.99997197687574046 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1361257918124 max c/cs inside fraction of cutoff 0.67180945526608660 average v/vesc outside cutoff 0.98178304386224979 Kinetic plus potential energy outside cutoff 6.2791135552849185E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008876784912049 check gamma integral -1.6179844369869946E-002 3510 9.394416 2.692E+05 -12.340663 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 337 -1.4667E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8142906978005184 rel_E_err 8.9633411947530176D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425505 4.7266295615056544E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574058 6.2791138406009551E+047 Layers above q= 0.99997197687574058 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1361494863718 max c/cs inside fraction of cutoff 0.67180946595289281 average v/vesc outside cutoff 0.98178306716190611 Kinetic plus potential energy outside cutoff 6.2791138406009551E+047 mass inside cutoff 1461 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008877440832274 check gamma integral -1.6179844271355676E-002 retry: logT < hydro_mtx_min_allowed_logT 800 3516 retry: logT < hydro_mtx_min_allowed_logT 800 3519 retry: logT < hydro_mtx_min_allowed_logT 800 3519 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3520 3520 9.394416 2.692E+05 -12.340664 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 341 -1.5079E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 10 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.8118443396970179 rel_E_err 7.5983288959816694D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425505 4.7266300997970125E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574058 6.2791147111333456E+047 Layers above q= 0.99997197687574058 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1362218036018 max c/cs inside fraction of cutoff 0.67180949853626459 average v/vesc outside cutoff 0.98178313824507035 Kinetic plus potential energy outside cutoff 6.2791147111333456E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008879442716124 check gamma integral -1.6179843971492112E-002 retry: logT < hydro_mtx_min_allowed_logT 801 3521 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3522 retry: logT < hydro_mtx_min_allowed_logT 801 3523 retry: logT < hydro_mtx_min_allowed_logT 801 3524 retry: logT < hydro_mtx_min_allowed_logT 798 3526 3530 9.394416 2.692E+05 -12.340664 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 346 -1.5793E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8094324509325439 rel_E_err 9.0473759756470510D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425505 4.7266301287603640E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574058 6.2791147580384988E+047 Layers above q= 0.99997197687574058 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1362256899490 max c/cs inside fraction of cutoff 0.67180950029074327 average v/vesc outside cutoff 0.98178314207620954 Kinetic plus potential energy outside cutoff 6.2791147580384988E+047 mass inside cutoff 1462 51.606338712362287 relax counter 0 log max v [km/s]= 4.3008879550297001 check gamma integral -1.6179843955588767E-002 3540 9.394416 2.692E+05 -12.340664 13.603569 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 346 -1.5001E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8069982507093991 rel_E_err 8.8785692710814724D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425516 4.7266302105614856E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574069 6.2791148903883024E+047 Layers above q= 0.99997197687574069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1362366753528 max c/cs inside fraction of cutoff 0.67180950524792815 average v/vesc outside cutoff 0.98178315289206264 Kinetic plus potential energy outside cutoff 6.2791148903883024E+047 mass inside cutoff 1462 51.606338712362302 relax counter 0 log max v [km/s]= 4.3008879854391617 check gamma integral -1.6179843909693185E-002 3550 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 346 -1.4209E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603545 13.772930 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.8045686209151439 rel_E_err 8.6229634856145535D-12 save photos/x550 for model 3550 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425516 4.7266307168598908E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574069 6.2791157091868659E+047 Layers above q= 0.99997197687574069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1363046940764 max c/cs inside fraction of cutoff 0.67180953589632098 average v/vesc outside cutoff 0.98178321975192728 Kinetic plus potential energy outside cutoff 6.2791157091868659E+047 mass inside cutoff 1462 51.606338712362302 relax counter 0 log max v [km/s]= 4.3008881737245730 check gamma integral -1.6179843627202161E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3554 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3556 retry: logT < hydro_mtx_min_allowed_logT 800 3556 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3557 retry: logT < hydro_mtx_min_allowed_logT 801 3558 retry: logT > hydro_mtx_max_allowed_logT 801 3560 3560 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 352 -1.5224E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 10 2.8823E+05 5.893702 6.193890 13.603545 13.772929 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.8021788476686229 rel_E_err 8.7637585990788235D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425516 4.7266314855520157E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574069 6.2791169522970737E+047 Layers above q= 0.99997197687574069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1364079668829 max c/cs inside fraction of cutoff 0.67180958242315691 average v/vesc outside cutoff 0.98178332125684320 Kinetic plus potential energy outside cutoff 6.2791169522970737E+047 mass inside cutoff 1463 51.606338712362302 relax counter 0 log max v [km/s]= 4.3008884595920707 check gamma integral -1.6179843198377276E-002 retry: logT < hydro_mtx_min_allowed_logT 798 3561 retry: logT < hydro_mtx_min_allowed_logT 802 3566 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3568 retry: logT < hydro_mtx_min_allowed_logT 802 3569 retry: adjust_correction failed in eval_equations -- give up in solver 3569 3570 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 357 -1.5937E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893702 6.193890 13.603544 13.772929 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7998554580121908 rel_E_err 8.3997921770823417D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425516 4.7266315535631473E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574069 6.2791170623452785E+047 Layers above q= 0.99997197687574069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1364170995721 max c/cs inside fraction of cutoff 0.67180958653881284 average v/vesc outside cutoff 0.98178333024365594 Kinetic plus potential energy outside cutoff 6.2791170623452785E+047 mass inside cutoff 1463 51.606338712362302 relax counter 0 log max v [km/s]= 4.3008884848717974 check gamma integral -1.6179843160537548E-002 retry: logT < hydro_mtx_min_allowed_logT 802 3571 3580 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2615 358 -1.5446E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193890 13.603544 13.772929 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7974850631955315 rel_E_err 8.7257955205739315D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425516 4.7266315829399549E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574069 6.2791171099187979E+047 Layers above q= 0.99997197687574069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1364210414749 max c/cs inside fraction of cutoff 0.67180958832707272 average v/vesc outside cutoff 0.98178333413103247 Kinetic plus potential energy outside cutoff 6.2791171099187979E+047 mass inside cutoff 1462 51.606338712362302 relax counter 0 log max v [km/s]= 4.3008884957831581 check gamma integral -1.6179843144729044E-002 3590 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2614 358 -1.4654E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603544 13.772929 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7951172793233896 rel_E_err 8.8415276295344256D-12 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425527 4.7266317646394598E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574080 6.2791174038117414E+047 Layers above q= 0.99997197687574080 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1364454486966 max c/cs inside fraction of cutoff 0.67180959932155659 average v/vesc outside cutoff 0.98178335813729878 Kinetic plus potential energy outside cutoff 6.2791174038117414E+047 mass inside cutoff 1461 51.606338712362309 relax counter 0 log max v [km/s]= 4.3008885633431762 check gamma integral -1.6179843043651616E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 9.394416 2.692E+05 -12.340664 13.603568 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 358 -1.3862E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193889 13.603544 13.772929 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7927377616709039 rel_E_err 8.5437201678257753D-12 save LOGS/profile39.data for model 3600 save photos/x600 for model 3600 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425527 4.7266328894789448E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574080 6.2791192228452227E+047 Layers above q= 0.99997197687574080 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1365965717719 max c/cs inside fraction of cutoff 0.67180966740961723 average v/vesc outside cutoff 0.98178350666911651 Kinetic plus potential energy outside cutoff 6.2791192228452227E+047 mass inside cutoff 1463 51.606338712362309 relax counter 0 log max v [km/s]= 4.3008889816472999 check gamma integral -1.6179842416135820E-002 retry: logT > hydro_mtx_max_allowed_logT 810 3606 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3607 retry: logT > hydro_mtx_max_allowed_logT 801 3607 retry: logT > hydro_mtx_max_allowed_logT 801 3607 retry: logT > hydro_mtx_max_allowed_logT 801 3608 retry: logT < hydro_mtx_min_allowed_logT 802 3609 retry: logT > hydro_mtx_max_allowed_logT 802 3609 retry: logT < hydro_mtx_min_allowed_logT 802 3610 3610 9.394416 2.692E+05 -12.340665 13.603567 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 366 -1.5479E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 9 2.8823E+05 5.893702 6.193889 13.603543 13.772927 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7903864330957262 rel_E_err 8.6802766857589330D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425527 4.7266353143555290E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574080 6.2791231441528188E+047 Layers above q= 0.99997197687574080 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1369223619565 max c/cs inside fraction of cutoff 0.67180981417442487 average v/vesc outside cutoff 0.98178382685592480 Kinetic plus potential energy outside cutoff 6.2791231441528188E+047 mass inside cutoff 1463 51.606338712362309 relax counter 0 log max v [km/s]= 4.3008898833687512 check gamma integral -1.6179841064475297E-002 retry: logT > hydro_mtx_max_allowed_logT 802 3612 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3613 retry: logT > hydro_mtx_max_allowed_logT 802 3613 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3614 3620 9.394416 2.692E+05 -12.340665 13.603567 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2616 370 -1.5891E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603543 13.772927 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7880500509005808 rel_E_err 8.4217223111030199D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425527 4.7266353346791801E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574080 6.2791231770866961E+047 Layers above q= 0.99997197687574080 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1369250875407 max c/cs inside fraction of cutoff 0.67180981540955786 average v/vesc outside cutoff 0.98178382954741683 Kinetic plus potential energy outside cutoff 6.2791231770866961E+047 mass inside cutoff 1463 51.606338712362309 relax counter 0 log max v [km/s]= 4.3008898909123632 check gamma integral -1.6179841052552612E-002 3630 9.394416 2.692E+05 -12.340665 13.603567 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2613 370 -1.5099E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603543 13.772927 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7857305342916812 rel_E_err 8.8299175660448686D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425550 4.7266353999024653E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574102 6.2791232826279864E+047 Layers above q= 0.99997197687574102 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1369338456059 max c/cs inside fraction of cutoff 0.67180981935360085 average v/vesc outside cutoff 0.98178383817418990 Kinetic plus potential energy outside cutoff 6.2791232826279864E+047 mass inside cutoff 1460 51.606338712362316 relax counter 0 log max v [km/s]= 4.3008899151520632 check gamma integral -1.6179841016896093E-002 3640 9.394416 2.692E+05 -12.340665 13.603567 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2610 370 -1.4308E+01 9.394416 -0.240529 9.338962 13.448668 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193889 13.603543 13.772927 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7834405183358637 rel_E_err 8.7528856860534608D-12 k, q, energy_removed_layers before adjustment is 1350 0.99999185264425550 4.7266358035531629E+047 k, q, energy_removed_layers after adjustment is 1457 0.99997197687574102 6.2791239354359019E+047 Layers above q= 0.99997197687574102 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1369880732334 max c/cs inside fraction of cutoff 0.67180984379765840 average v/vesc outside cutoff 0.98178389148055278 Kinetic plus potential energy outside cutoff 6.2791239354359019E+047 mass inside cutoff 1457 51.606338712362316 relax counter 0 log max v [km/s]= 4.3008900652366373 check gamma integral -1.6179840792416994E-002 3650 9.394416 2.692E+05 -12.340666 13.603566 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2609 370 -1.3516E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193889 13.603542 13.772926 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7811390481495399 rel_E_err 8.7473570840065436D-12 save photos/x650 for model 3650 k, q, energy_removed_layers before adjustment is 1349 0.99999185264425561 4.7266383026544031E+047 k, q, energy_removed_layers after adjustment is 1456 0.99997197687574113 6.2791279767732176E+047 Layers above q= 0.99997197687574113 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1373238363842 max c/cs inside fraction of cutoff 0.67180999504660954 average v/vesc outside cutoff 0.98178422147597233 Kinetic plus potential energy outside cutoff 6.2791279767732176E+047 mass inside cutoff 1456 51.606338712362330 relax counter 0 log max v [km/s]= 4.3008909944723168 check gamma integral -1.6179839399535899E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3652 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3653 retry: adjust_correction failed in eval_equations -- give up in solver 3653 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3654 retry: logT > hydro_mtx_max_allowed_logT 801 3655 retry: logT < hydro_mtx_min_allowed_logT 801 3655 retry: logT < hydro_mtx_min_allowed_logT 801 3655 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3659 retry: logT < hydro_mtx_min_allowed_logT 802 3659 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3660 3660 9.394416 2.692E+05 -12.340667 13.603566 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 380 -1.5734E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 8 2.8823E+05 5.893702 6.193889 13.603542 13.772925 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7788933035083172 rel_E_err 8.5842632703196852D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425572 4.7266394879427242E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574124 6.2791298935581801E+047 Layers above q= 0.99997197687574124 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1374830815444 max c/cs inside fraction of cutoff 0.67181006678591915 average v/vesc outside cutoff 0.98178437798738205 Kinetic plus potential energy outside cutoff 6.2791298935581801E+047 mass inside cutoff 1458 51.606338712362330 relax counter 0 log max v [km/s]= 4.3008914351609864 check gamma integral -1.6179838737997686E-002 hydro_solver_step returned ierr -1 s% model_number 3662 nz 2611 s% num_retries 380 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3662 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3663 3670 9.394416 2.692E+05 -12.340667 13.603566 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 382 -1.5544E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893702 6.193889 13.603542 13.772925 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7766360985549108 rel_E_err 8.6318092645908288D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425572 4.7266395151555861E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574124 6.2791299376327656E+047 Layers above q= 0.99997197687574124 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1374867326772 max c/cs inside fraction of cutoff 0.67181006843613333 average v/vesc outside cutoff 0.98178438158831849 Kinetic plus potential energy outside cutoff 6.2791299376327656E+047 mass inside cutoff 1458 51.606338712362330 relax counter 0 log max v [km/s]= 4.3008914452648517 check gamma integral -1.6179838723364141E-002 3680 9.394416 2.692E+05 -12.340667 13.603566 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 382 -1.4753E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603542 13.772925 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7743951158126592 rel_E_err 8.5936618985058277D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425572 4.7266396600211544E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574124 6.2791301719631584E+047 Layers above q= 0.99997197687574124 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1375061912247 max c/cs inside fraction of cutoff 0.67181007720771324 average v/vesc outside cutoff 0.98178440072491824 Kinetic plus potential energy outside cutoff 6.2791301719631584E+047 mass inside cutoff 1458 51.606338712362330 relax counter 0 log max v [km/s]= 4.3008914991127689 check gamma integral -1.6179838642047258E-002 3690 9.394416 2.692E+05 -12.340667 13.603565 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 382 -1.3961E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603542 13.772925 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7721664188065560 rel_E_err 8.6928081962080895D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425594 4.7266405567994762E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574146 6.2791316222029724E+047 Layers above q= 0.99997197687574146 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1376266734173 max c/cs inside fraction of cutoff 0.67181013149371904 average v/vesc outside cutoff 0.98178451915004294 Kinetic plus potential energy outside cutoff 6.2791316222029724E+047 mass inside cutoff 1458 51.606338712362337 relax counter 0 log max v [km/s]= 4.3008918325185901 check gamma integral -1.6179838142175461E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3697 retry: logT > hydro_mtx_max_allowed_logT 802 3697 retry: adjust_correction failed in eval_equations -- give up in solver 3698 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 804 3699 retry: logT > hydro_mtx_max_allowed_logT 802 3699 retry: adjust_correction failed in eval_equations -- give up in solver 3700 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 9.394416 2.692E+05 -12.340668 13.603565 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2609 388 -1.4975E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893702 6.193889 13.603541 13.772924 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7699254221732765 rel_E_err 8.9428853810672077D-12 save LOGS/profile40.data for model 3700 save photos/x700 for model 3700 k, q, energy_removed_layers before adjustment is 1349 0.99999185264425594 4.7266429822331225E+047 k, q, energy_removed_layers after adjustment is 1456 0.99997197687574146 6.2791355444145570E+047 Layers above q= 0.99997197687574146 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1379525394254 max c/cs inside fraction of cutoff 0.67181027828875428 average v/vesc outside cutoff 0.98178483941080452 Kinetic plus potential energy outside cutoff 6.2791355444145570E+047 mass inside cutoff 1456 51.606338712362337 relax counter 0 log max v [km/s]= 4.3008927342218257 check gamma integral -1.6179836790261266E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3701 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 3702 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 3703 retry: adjust_correction failed in eval_equations -- give up in solver 3703 3710 9.394416 2.692E+05 -12.340668 13.603565 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2610 392 -1.5388E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893702 6.193889 13.603541 13.772924 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7677507720142280 rel_E_err 8.5210529042803143D-12 k, q, energy_removed_layers before adjustment is 1350 0.99999185264425594 4.7266430282661580E+047 k, q, energy_removed_layers after adjustment is 1457 0.99997197687574146 6.2791356189224812E+047 Layers above q= 0.99997197687574146 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1379587192514 max c/cs inside fraction of cutoff 0.67181028107858054 average v/vesc outside cutoff 0.98178484549638312 Kinetic plus potential energy outside cutoff 6.2791356189224812E+047 mass inside cutoff 1457 51.606338712362337 relax counter 0 log max v [km/s]= 4.3008927513213999 check gamma integral -1.6179836764662694E-002 3720 9.394416 2.692E+05 -12.340668 13.603565 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 392 -1.4596E+01 9.394416 -0.240529 9.338961 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603541 13.772924 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7655270230871976 rel_E_err 8.5962419181619330D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425616 4.7266432361795325E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574169 6.2791359552071219E+047 Layers above q= 0.99997197687574169 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1379866485631 max c/cs inside fraction of cutoff 0.67181029366556433 average v/vesc outside cutoff 0.98178487297025074 Kinetic plus potential energy outside cutoff 6.2791359552071219E+047 mass inside cutoff 1458 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008928286014383 check gamma integral -1.6179836648418430E-002 3730 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2613 392 -1.3804E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893701 6.193889 13.603541 13.772923 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7633092935288381 rel_E_err 8.7527014098741075D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425627 4.7266445233280528E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574180 6.2791380367111624E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1381595794887 max c/cs inside fraction of cutoff 0.67181037156991485 average v/vesc outside cutoff 0.98178504293360924 Kinetic plus potential energy outside cutoff 6.2791380367111624E+047 mass inside cutoff 1460 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008933070859845 check gamma integral -1.6179835931448242E-002 retry: logT < hydro_mtx_min_allowed_logT 803 3735 retry: logT < hydro_mtx_min_allowed_logT 803 3735 retry: logT < hydro_mtx_min_allowed_logT 803 3736 retry: adjust_correction failed in eval_equations -- give up in solver 3736 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 802 3737 retry: logT > hydro_mtx_max_allowed_logT 803 3740 3740 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2613 398 -1.4818E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 8 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7611351623404170 rel_E_err 8.5260286514930887D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266465072923978E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791412450297557E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384261319254 max c/cs inside fraction of cutoff 0.67181049165097229 average v/vesc outside cutoff 0.98178530491027172 Kinetic plus potential energy outside cutoff 6.2791412450297557E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008940445698336 check gamma integral -1.6179834825294788E-002 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT < hydro_mtx_min_allowed_logT 803 3743 retry: logT > hydro_mtx_max_allowed_logT 803 3743 3750 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2613 411 -1.7940E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7589545349674935 rel_E_err 8.9690541116841095D-12 save photos/x750 for model 3750 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266465727590744E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791413509637036E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384349227521 max c/cs inside fraction of cutoff 0.67181049561661155 average v/vesc outside cutoff 0.98178531356237664 Kinetic plus potential energy outside cutoff 6.2791413509637036E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008940688911466 check gamma integral -1.6179834789460248E-002 3760 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 411 -1.7148E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7568123099003765 rel_E_err 8.4921198823918470D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266465733790444E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791413520342968E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384350010480 max c/cs inside fraction of cutoff 0.67181049565970075 average v/vesc outside cutoff 0.98178531365267552 Kinetic plus potential energy outside cutoff 6.2791413520342968E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008940691077653 check gamma integral -1.6179834788755332E-002 3770 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 411 -1.6356E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7546808910104419 rel_E_err 8.2274840429266981D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266465770245511E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791413579977098E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384354858371 max c/cs inside fraction of cutoff 0.67181049589488695 average v/vesc outside cutoff 0.98178531414253256 Kinetic plus potential energy outside cutoff 6.2791413579977098E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008940704490151 check gamma integral -1.6179834786982962E-002 3780 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 411 -1.5564E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7525294773512803 rel_E_err 8.9812170426141034D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266465994033547E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791413942553736E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384384875214 max c/cs inside fraction of cutoff 0.67181049724991226 average v/vesc outside cutoff 0.98178531710604944 Kinetic plus potential energy outside cutoff 6.2791413942553736E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008940787536734 check gamma integral -1.6179834774517596E-002 3790 9.394416 2.692E+05 -12.340669 13.603564 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 411 -1.4773E+01 9.394416 -0.240529 9.338960 13.448667 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772922 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7504094180833896 rel_E_err 8.3258931939293615D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266467377718165E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791416180781931E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1384570731589 max c/cs inside fraction of cutoff 0.67181050562638567 average v/vesc outside cutoff 0.98178533538472568 Kinetic plus potential energy outside cutoff 6.2791416180781931E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008941301737771 check gamma integral -1.6179834696822843E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 9.394416 2.692E+05 -12.340670 13.603563 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367678 2611 411 -1.3981E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603540 13.772921 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7482663900676014 rel_E_err 8.7339041632464398D-12 save LOGS/profile41.data for model 3800 save photos/x800 for model 3800 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266475943199497E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791430032639485E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1385721505239 max c/cs inside fraction of cutoff 0.67181055746979856 average v/vesc outside cutoff 0.98178544849173932 Kinetic plus potential energy outside cutoff 6.2791430032639485E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008944485476661 check gamma integral -1.6179834218930707E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3805 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: logT < hydro_mtx_min_allowed_logT 800 3805 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3805 retry: adjust_correction failed in eval_equations -- give up in solver 3805 3810 9.394416 2.692E+05 -12.340670 13.603563 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 423 -1.6801E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603539 13.772921 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7461633361012643 rel_E_err 8.5461159184586848D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266486920515789E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791447784648386E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1387196324249 max c/cs inside fraction of cutoff 0.67181062391476531 average v/vesc outside cutoff 0.98178559344415195 Kinetic plus potential energy outside cutoff 6.2791447784648386E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008948565574840 check gamma integral -1.6179833607487305E-002 3820 9.394416 2.692E+05 -12.340670 13.603563 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 423 -1.6010E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603539 13.772921 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7440712206336562 rel_E_err 8.8492677000945080D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266487001056580E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791447915579851E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1387207095217 max c/cs inside fraction of cutoff 0.67181062440726091 average v/vesc outside cutoff 0.98178559451608449 Kinetic plus potential energy outside cutoff 6.2791447915579851E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008948595372392 check gamma integral -1.6179833603316405E-002 3830 9.394416 2.692E+05 -12.340670 13.603563 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 423 -1.5218E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603539 13.772921 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7419985553484274 rel_E_err 8.8564548859589673D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266487497805901E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791448719556816E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1387273786231 max c/cs inside fraction of cutoff 0.67181062742135766 average v/vesc outside cutoff 0.98178560108362234 Kinetic plus potential energy outside cutoff 6.2791448719556816E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008948779870799 check gamma integral -1.6179833574814961E-002 3840 9.394416 2.692E+05 -12.340670 13.603563 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 423 -1.4426E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603539 13.772921 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7399287823355003 rel_E_err 8.8667749474882211D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266490571605044E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791453690862519E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1387686719406 max c/cs inside fraction of cutoff 0.67181064603302065 average v/vesc outside cutoff 0.98178564167852278 Kinetic plus potential energy outside cutoff 6.2791453690862519E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008949922228767 check gamma integral -1.6179833404263287E-002 3850 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 423 -1.3634E+01 9.394416 -0.240529 9.338960 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 4 2.8823E+05 5.893701 6.193889 13.603539 13.772920 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7378665945871115 rel_E_err 8.5326629861975539D-12 save photos/x850 for model 3850 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266509601793752E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791484465112650E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1390243492594 max c/cs inside fraction of cutoff 0.67181076121309624 average v/vesc outside cutoff 0.98178589296169638 Kinetic plus potential energy outside cutoff 6.2791484465112650E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008956995118064 check gamma integral -1.6179832343668377E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3851 retry: adjust_correction failed in eval_equations -- give up in solver 3852 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 800 3853 retry: logT < hydro_mtx_min_allowed_logT 801 3855 retry: logT < hydro_mtx_min_allowed_logT 801 3856 retry: adjust_correction failed in eval_equations -- give up in solver 3856 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3856 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 801 3857 retry: logT > hydro_mtx_max_allowed_logT 801 3857 retry: adjust_correction failed in eval_equations -- give up in solver 3858 3860 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2611 433 -1.5853E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603538 13.772920 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7358534764518732 rel_E_err 8.7398013469947676D-12 k, q, energy_removed_layers before adjustment is 1351 0.99999185264425638 4.7266515680940017E+047 k, q, energy_removed_layers after adjustment is 1458 0.99997197687574191 6.2791494296334279E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391060213828 max c/cs inside fraction of cutoff 0.67181079800755650 average v/vesc outside cutoff 0.98178597323598882 Kinetic plus potential energy outside cutoff 6.2791494296334279E+047 mass inside cutoff 1458 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008959254348698 check gamma integral -1.6179832005232379E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3870 3870 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 434 -1.5362E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 10 2.8823E+05 5.893701 6.193889 13.603538 13.772920 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7338183912841245 rel_E_err 8.0669702519257250D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266516317835774E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791495326931946E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391145735276 max c/cs inside fraction of cutoff 0.67181080186186948 average v/vesc outside cutoff 0.98178598165348530 Kinetic plus potential energy outside cutoff 6.2791495326931946E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008959490917666 check gamma integral -1.6179831969292270E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3871 3880 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2612 435 -1.4871E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7318000444309680 rel_E_err 8.6117220246484284D-12 k, q, energy_removed_layers before adjustment is 1352 0.99999185264425638 4.7266517421051639E+047 k, q, energy_removed_layers after adjustment is 1459 0.99997197687574191 6.2791497111629828E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391293908453 max c/cs inside fraction of cutoff 0.67181080854285358 average v/vesc outside cutoff 0.98178599622847551 Kinetic plus potential energy outside cutoff 6.2791497111629828E+047 mass inside cutoff 1459 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008959900792272 check gamma integral -1.6179831907508008E-002 retry: logT < hydro_mtx_min_allowed_logT 802 3885 retry: logT < hydro_mtx_min_allowed_logT 803 3887 retry: adjust_correction failed in eval_equations -- give up in solver 3887 retry: logT > hydro_mtx_max_allowed_logT 803 3888 retry: logT < hydro_mtx_min_allowed_logT 803 3890 3890 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2612 440 -1.5584E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 9 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7297723425742220 rel_E_err 8.9882199518377088D-12 k, q, energy_removed_layers before adjustment is 1352 0.99999185264425638 4.7266519703692177E+047 k, q, energy_removed_layers after adjustment is 1459 0.99997197687574191 6.2791500803555402E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391600546401 max c/cs inside fraction of cutoff 0.67181082236231204 average v/vesc outside cutoff 0.98178602637543577 Kinetic plus potential energy outside cutoff 6.2791500803555402E+047 mass inside cutoff 1459 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008960749004759 check gamma integral -1.6179831780224772E-002 retry: logT < hydro_mtx_min_allowed_logT 803 3891 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3892 retry: logT < hydro_mtx_min_allowed_logT 803 3892 retry: logT > hydro_mtx_max_allowed_logT 803 3892 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2614 444 -1.5997E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7277690984928391 rel_E_err 8.6096948714717942D-12 save LOGS/profile42.data for model 3900 save photos/x900 for model 3900 k, q, energy_removed_layers before adjustment is 1354 0.99999185264425638 4.7266519806180897E+047 k, q, energy_removed_layers after adjustment is 1461 0.99997197687574191 6.2791500969977287E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391614266040 max c/cs inside fraction of cutoff 0.67181082298941663 average v/vesc outside cutoff 0.98178602773658230 Kinetic plus potential energy outside cutoff 6.2791500969977287E+047 mass inside cutoff 1461 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008960786955477 check gamma integral -1.6179831774766239E-002 3910 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 444 -1.5205E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7257807900564064 rel_E_err 8.4812469746764604D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266520317857202E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791501798087131E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1391682962922 max c/cs inside fraction of cutoff 0.67181082608596066 average v/vesc outside cutoff 0.98178603450121216 Kinetic plus potential energy outside cutoff 6.2791501798087131E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008960976981783 check gamma integral -1.6179831745354405E-002 3920 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 444 -1.4413E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7237709811885704 rel_E_err 8.7934288098149339D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266523484091074E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791506918874185E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392108315906 max c/cs inside fraction of cutoff 0.67181084525913237 average v/vesc outside cutoff 0.98178607631669301 Kinetic plus potential energy outside cutoff 6.2791506918874185E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962153566541 check gamma integral -1.6179831569416915E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 3921 retry: logT < hydro_mtx_min_allowed_logT 803 3922 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3923 retry: adjust_correction failed in eval_equations -- give up in solver 3925 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 3926 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 804 3928 retry: logT > hydro_mtx_max_allowed_logT 803 3929 retry: adjust_correction failed in eval_equations -- give up in solver 3930 3930 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 452 -1.6029E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 6 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.7218003204316892 rel_E_err 8.7534385756515977D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266524697515289E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791508881767428E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392271296111 max c/cs inside fraction of cutoff 0.67181085260666662 average v/vesc outside cutoff 0.98178609234418279 Kinetic plus potential energy outside cutoff 6.2791508881767428E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962604388934 check gamma integral -1.6179831501705596E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: adjust_correction failed in eval_equations -- give up in solver 3935 retry: logT < hydro_mtx_min_allowed_logT 803 3935 retry: logT < hydro_mtx_min_allowed_logT 803 3935 3940 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.8549E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7198333970003352 rel_E_err 8.8078031815602894D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266524796112090E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791509041887714E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392284493163 max c/cs inside fraction of cutoff 0.67181085320793121 average v/vesc outside cutoff 0.98178609365386393 Kinetic plus potential energy outside cutoff 6.2791509041887714E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962640893458 check gamma integral -1.6179831496093301E-002 3950 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.7757E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7178664722214991 rel_E_err 8.8301018847759355D-12 save photos/x950 for model 3950 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266524797912114E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791509045477416E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392284685746 max c/cs inside fraction of cutoff 0.67181085322209499 average v/vesc outside cutoff 0.98178609368605985 Kinetic plus potential energy outside cutoff 6.2791509045477416E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962641426161 check gamma integral -1.6179831496251577E-002 3960 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.6965E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7158862426653787 rel_E_err 8.5053885489668130D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266524807156341E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791509061103772E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392285878164 max c/cs inside fraction of cutoff 0.67181085328717294 average v/vesc outside cutoff 0.98178609381659987 Kinetic plus potential energy outside cutoff 6.2791509061103772E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962644724535 check gamma integral -1.6179831495630573E-002 3970 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.6174E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7139618107699031 rel_E_err 8.4340695591916943D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266524862480037E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791509151256941E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392293261313 max c/cs inside fraction of cutoff 0.67181085362524218 average v/vesc outside cutoff 0.98178609455560040 Kinetic plus potential energy outside cutoff 6.2791509151256941E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962665147159 check gamma integral -1.6179831492922854E-002 3980 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.5382E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7120130548855688 rel_E_err 8.8988408624376922D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266525203100917E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791509702753668E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392338975850 max c/cs inside fraction of cutoff 0.67181085568932064 average v/vesc outside cutoff 0.98178609906166470 Kinetic plus potential energy outside cutoff 6.2791509702753668E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008962791598560 check gamma integral -1.6179831473748189E-002 3990 9.394416 2.692E+05 -12.340671 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 463 -1.4590E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7100720888653056 rel_E_err 8.8711978437238131D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266527310204924E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791513110827821E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1392622028213 max c/cs inside fraction of cutoff 0.67181086845085547 average v/vesc outside cutoff 0.98178612689241984 Kinetic plus potential energy outside cutoff 6.2791513110827821E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008963574548753 check gamma integral -1.6179831356139564E-002 retry: logT < hydro_mtx_min_allowed_logT 803 3996 retry: logT < hydro_mtx_min_allowed_logT 802 3998 retry: logT > hydro_mtx_max_allowed_logT 803 3998 retry: adjust_correction failed in eval_equations -- give up in solver 3999 retry: logT > hydro_mtx_max_allowed_logT 802 3999 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 468 -1.5303E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 5 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7081531607983536 rel_E_err 8.9666584056924348D-12 save LOGS/profile43.data for model 4000 save photos/4000 for model 4000 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266532777932313E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791521953330611E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393356601939 max c/cs inside fraction of cutoff 0.67181090154320500 average v/vesc outside cutoff 0.98178619909512932 Kinetic plus potential energy outside cutoff 6.2791521953330611E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008965606422693 check gamma integral -1.6179831050989364E-002 retry: logT < hydro_mtx_min_allowed_logT 803 4004 retry: logT > hydro_mtx_max_allowed_logT 803 4005 retry: logT < hydro_mtx_min_allowed_logT 803 4006 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 retry: logT < hydro_mtx_min_allowed_logT 803 4009 4010 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2613 482 -1.8726E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7062735085185938 rel_E_err 8.6607423230631698D-12 k, q, energy_removed_layers before adjustment is 1353 0.99999185264425638 4.7266533376758920E+047 k, q, energy_removed_layers after adjustment is 1460 0.99997197687574191 6.2791522922360552E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393437009051 max c/cs inside fraction of cutoff 0.67181090517215591 average v/vesc outside cutoff 0.98178620700831420 Kinetic plus potential energy outside cutoff 6.2791522922360552E+047 mass inside cutoff 1460 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008965828831398 check gamma integral -1.6179831017357808E-002 4020 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2615 482 -1.7934E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7043672475116995 rel_E_err 8.8179389618712851D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425638 4.7266533378074437E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574191 6.2791522925172448E+047 Layers above q= 0.99997197687574191 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393437137203 max c/cs inside fraction of cutoff 0.67181090518219211 average v/vesc outside cutoff 0.98178620703424935 Kinetic plus potential energy outside cutoff 6.2791522925172448E+047 mass inside cutoff 1462 51.606338712362366 relax counter 0 log max v [km/s]= 4.3008965829185879 check gamma integral -1.6179831017751778E-002 4030 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2615 482 -1.7142E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7024453309944843 rel_E_err 8.7158440769556546D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425627 4.7266533384350180E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574180 6.2791522936002119E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393437930706 max c/cs inside fraction of cutoff 0.67181090522889197 average v/vesc outside cutoff 0.98178620711937270 Kinetic plus potential energy outside cutoff 6.2791522936002119E+047 mass inside cutoff 1462 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008965831380728 check gamma integral -1.6179831017258582E-002 4040 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2615 482 -1.6350E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.7005529675451259 rel_E_err 8.3314218185706526D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425627 4.7266533421295514E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574180 6.2791522996438459E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393442843848 max c/cs inside fraction of cutoff 0.67181090545737998 average v/vesc outside cutoff 0.98178620761571678 Kinetic plus potential energy outside cutoff 6.2791522996438459E+047 mass inside cutoff 1462 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008965844970621 check gamma integral -1.6179831015189220E-002 4050 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2615 482 -1.5559E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6986897770513458 rel_E_err 8.4659511813253376D-12 save photos/x050 for model 4050 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425627 4.7266533648087139E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574180 6.2791523363866251E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393473264718 max c/cs inside fraction of cutoff 0.67181090683731537 average v/vesc outside cutoff 0.98178621061875737 Kinetic plus potential energy outside cutoff 6.2791523363866251E+047 mass inside cutoff 1462 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008965929115615 check gamma integral -1.6179831002349609E-002 4060 9.394416 2.692E+05 -12.340672 13.603562 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2615 482 -1.4767E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 2 2.8823E+05 5.893701 6.193889 13.603538 13.772919 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6968023954419404 rel_E_err 8.6474736774830623D-12 k, q, energy_removed_layers before adjustment is 1355 0.99999185264425627 4.7266535050388673E+047 k, q, energy_removed_layers after adjustment is 1462 0.99997197687574180 6.2791525632203083E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1393661622724 max c/cs inside fraction of cutoff 0.67181091532697146 average v/vesc outside cutoff 0.98178622914334679 Kinetic plus potential energy outside cutoff 6.2791525632203083E+047 mass inside cutoff 1462 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008966450117665 check gamma integral -1.6179830924161805E-002 4070 9.394416 2.692E+05 -12.340672 13.603561 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2616 482 -1.3975E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603538 13.772918 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6949368905049331 rel_E_err 8.8124103622265698D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425627 4.7266543731133121E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574180 6.2791539670459040E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1394827885813 max c/cs inside fraction of cutoff 0.67181096786881955 average v/vesc outside cutoff 0.98178634377246032 Kinetic plus potential energy outside cutoff 6.2791539670459040E+047 mass inside cutoff 1463 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008969675964099 check gamma integral -1.6179830440820418E-002 retry: adjust_correction failed in eval_equations -- give up in solver 4072 retry: logT < hydro_mtx_min_allowed_logT 802 4073 retry: logT < hydro_mtx_min_allowed_logT 802 4075 retry: logT > hydro_mtx_max_allowed_logT 803 4075 retry: logT < hydro_mtx_min_allowed_logT 802 4075 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 4076 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 803 4077 4080 9.394416 2.692E+05 -12.340672 13.603561 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2616 489 -1.5290E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603537 13.772918 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6930859061549137 rel_E_err 8.4565525575103405D-12 k, q, energy_removed_layers before adjustment is 1356 0.99999185264425627 4.7266549072616318E+047 k, q, energy_removed_layers after adjustment is 1463 0.99997197687574180 6.2791548308808928E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1395545498769 max c/cs inside fraction of cutoff 0.67181100020327100 average v/vesc outside cutoff 0.98178641430798319 Kinetic plus potential energy outside cutoff 6.2791548308808928E+047 mass inside cutoff 1463 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008971660809845 check gamma integral -1.6179830142254947E-002 retry: logT > hydro_mtx_max_allowed_logT 804 4085 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 804 4088 retry: logT < hydro_mtx_min_allowed_logT 804 4088 retry: logT < hydro_mtx_min_allowed_logT 804 4089 4090 9.394416 2.692E+05 -12.340672 13.603561 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2618 493 -1.5703E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603537 13.772918 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6912353592853284 rel_E_err 8.8787536110882692D-12 k, q, energy_removed_layers before adjustment is 1358 0.99999185264425627 4.7266550092674977E+047 k, q, energy_removed_layers after adjustment is 1465 0.99997197687574180 6.2791549959029194E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1395682499356 max c/cs inside fraction of cutoff 0.67181100638473445 average v/vesc outside cutoff 0.98178642778498737 Kinetic plus potential energy outside cutoff 6.2791549959029194E+047 mass inside cutoff 1465 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008972039736415 check gamma integral -1.6179830085302081E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 9.394416 2.692E+05 -12.340672 13.603561 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2617 493 -1.4911E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 3 2.8823E+05 5.893701 6.193889 13.603537 13.772918 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 max increase log_rel_run_E_err -7.6893866438389189 rel_E_err 8.4945156393259810D-12 save LOGS/profile44.data for model 4100 save photos/x100 for model 4100 k, q, energy_removed_layers before adjustment is 1357 0.99999185264425627 4.7266551099163592E+047 k, q, energy_removed_layers after adjustment is 1464 0.99997197687574180 6.2791551587310286E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1395817676705 max c/cs inside fraction of cutoff 0.67181101247849218 average v/vesc outside cutoff 0.98178644108316371 Kinetic plus potential energy outside cutoff 6.2791551587310286E+047 mass inside cutoff 1464 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008972413618833 check gamma integral -1.6179830030385072E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 805 4101 retry: adjust_correction failed in eval_equations -- give up in solver 4106 retry: logT > hydro_mtx_max_allowed_logT 805 4110 4110 9.394416 2.692E+05 -12.340672 13.603561 51.607785 0.000000 0.000000 0.000000 0.214015 -1.367679 2617 496 -1.5022E+01 9.394416 -0.240529 9.338959 13.448666 -99.000000 51.607785 0.000000 0.034906 0.785985 0.618645 9 2.8823E+05 5.893701 6.193889 13.603537 13.772918 -7.066676 49.121146 0.000005 0.000001 0.436178 -0.816E+01 retry log_rel_run_E_err -7.6875495729107852 rel_E_err 8.9325653576002545D-12 k, q, energy_removed_layers before adjustment is 1357 0.99999185264425627 4.7266552948616483E+047 k, q, energy_removed_layers after adjustment is 1464 0.99997197687574180 6.2791554578737095E+047 Layers above q= 0.99997197687574180 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11744.220703125000 max vel inside fraction of cutoff 1867.1396066111215 max c/cs inside fraction of cutoff 0.67181102367292000 average v/vesc outside cutoff 0.98178646551058391 Kinetic plus potential energy outside cutoff 6.2791554578737095E+047 mass inside cutoff 1464 51.606338712362351 relax counter 0 log max v [km/s]= 4.3008973100751877 check gamma integral -1.6179829926175282E-002 retry: logT < hydro_mtx_min_allowed_logT 805 4112 retry: logT > hydro_mtx_max_allowed_logT 805 4113 retry: logT < hydro_mtx_min_allowed_logT 805 4116 retry: logT < hydro_mtx_min_allowed_logT 805 4116 retry: logT < hydro_mtx_min_allowed_logT 805 4116 num_retries 501 max_number_retries 500 stopping because of problems -- too many retries terminated evolution: nonzero_ierr termination code: max_number_retries runtime (minutes), retries, steps 57.79 501 4116 DATE: 2026-11-20 TIME: 15:21:20 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************