DATE: 2026-11-20 TIME: 08:25:25 run inlist_to_he_dep_header DATE: 2026-11-20 TIME: 08:25:27 reading user weak rate file /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number 703aa83e7 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. create pre-main-sequence model set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 species mass 8 7.2500000000000000D+01 write /mnt/home/bbarker/ceph/mesa_testing/work/data/eosDT_data/cache/mesa-FreeEOS_02z00x.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.002_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.002_x0.0.bin relax_num_steps 300 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.001_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.002_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.001_x0.1.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_z0.002_x0.1.bin 10 5.496775 7489.969 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401564 655 0 -5.0000E+00 5.496775 3.027373 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 9.8000E-05 -6.237990 6.507360 -99.000000 -99.000000 -7.613691 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 20 5.496781 7493.367 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401544 656 0 -5.0000E+00 5.496781 3.027379 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 1.9800E-04 -6.237972 6.508160 -99.000000 -99.000000 -7.614360 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 30 5.496775 7511.251 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401561 655 0 -5.0000E+00 5.496775 3.027412 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 2.9800E-04 -6.237989 6.512366 -99.000000 -99.000000 -7.617873 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 40 5.496769 7526.973 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401523 655 0 -5.0000E+00 5.496769 3.027440 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 3.9800E-04 -6.237982 6.516055 -99.000000 -99.000000 -7.620947 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 50 5.496764 7540.411 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401475 655 0 -5.0000E+00 5.496764 3.027464 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 4.9800E-04 -6.237968 6.519202 -99.000000 -99.000000 -7.623563 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 60 5.496762 7551.199 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401432 656 0 -5.0000E+00 5.496762 3.027484 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 5.9800E-04 -6.237952 6.521724 -99.000000 -99.000000 -7.625655 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 70 5.496762 7560.400 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401395 657 0 -5.0000E+00 5.496762 3.027500 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 6.9800E-04 -6.237936 6.523873 -99.000000 -99.000000 -7.627433 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 80 5.496764 7568.169 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401362 653 0 -5.0000E+00 5.496764 3.027514 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 7.9800E-04 -6.237919 6.525685 -99.000000 -99.000000 -7.628930 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 90 5.496766 7575.175 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401332 653 0 -5.0000E+00 5.496766 3.027527 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 8.9800E-04 -6.237903 6.527318 -99.000000 -99.000000 -7.630275 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 5.496769 7581.669 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401305 655 0 -5.0000E+00 5.496769 3.027538 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 9.9800E-04 -6.237887 6.528830 -99.000000 -99.000000 -7.631519 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 110 5.496772 7587.318 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401279 655 0 -5.0000E+00 5.496772 3.027549 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 1.0980E-03 -6.237871 6.530144 -99.000000 -99.000000 -7.632599 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 120 5.496776 7592.437 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401255 656 0 -5.0000E+00 5.496776 3.027558 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 3 1.1980E-03 -6.237854 6.531334 -99.000000 -99.000000 -7.633575 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 130 5.496781 7597.177 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401231 656 0 -5.0000E+00 5.496781 3.027566 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.2980E-03 -6.237837 6.532435 -99.000000 -99.000000 -7.634477 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 140 5.496786 7601.843 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401208 657 0 -5.0000E+00 5.496786 3.027574 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.3980E-03 -6.237820 6.533518 -99.000000 -99.000000 -7.635363 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 150 5.496791 7605.919 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401185 657 0 -5.0000E+00 5.496791 3.027581 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.4980E-03 -6.237802 6.534463 -99.000000 -99.000000 -7.636135 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 160 5.496796 7609.654 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401162 657 0 -5.0000E+00 5.496796 3.027588 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.5980E-03 -6.237784 6.535329 -99.000000 -99.000000 -7.636841 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 170 5.496802 7613.128 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401139 657 0 -5.0000E+00 5.496802 3.027593 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.6980E-03 -6.237765 6.536133 -99.000000 -99.000000 -7.637497 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 180 5.496808 7616.371 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401116 657 0 -5.0000E+00 5.496808 3.027599 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.7980E-03 -6.237747 6.536884 -99.000000 -99.000000 -7.638108 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 190 5.496814 7619.411 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401093 657 0 -5.0000E+00 5.496814 3.027604 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.8980E-03 -6.237728 6.537586 -99.000000 -99.000000 -7.638680 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 5.496819 7622.927 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401071 657 0 -5.0000E+00 5.496819 3.027609 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 1.9980E-03 -6.237710 6.538399 -99.000000 -99.000000 -7.639340 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 210 5.496825 7625.815 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401049 657 0 -5.0000E+00 5.496825 3.027614 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.0980E-03 -6.237691 6.539066 -99.000000 -99.000000 -7.639881 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 220 5.496832 7628.448 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401026 657 0 -5.0000E+00 5.496832 3.027617 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.1980E-03 -6.237671 6.539673 -99.000000 -99.000000 -7.640374 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 230 5.496838 7630.946 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.401003 656 0 -5.0000E+00 5.496838 3.027621 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.2980E-03 -6.237651 6.540249 -99.000000 -99.000000 -7.640841 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 240 5.496845 7633.313 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400980 656 0 -5.0000E+00 5.496845 3.027624 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.3980E-03 -6.237631 6.540794 -99.000000 -99.000000 -7.641282 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 250 5.496852 7635.683 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400957 656 0 -5.0000E+00 5.496852 3.027627 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.4980E-03 -6.237612 6.541340 -99.000000 -99.000000 -7.641724 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 260 5.496858 7637.878 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400934 656 0 -5.0000E+00 5.496858 3.027630 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.5980E-03 -6.237591 6.541844 -99.000000 -99.000000 -7.642132 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 270 5.496865 7639.954 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400910 656 0 -5.0000E+00 5.496865 3.027632 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.6980E-03 -6.237571 6.542321 -99.000000 -99.000000 -7.642517 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 280 5.496872 7642.443 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400888 658 0 -5.0000E+00 5.496872 3.027635 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.7980E-03 -6.237551 6.542893 -99.000000 -99.000000 -7.642979 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt 290 5.496879 7644.514 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400865 658 0 -5.0000E+00 5.496879 3.027638 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.8980E-03 -6.237531 6.543369 -99.000000 -99.000000 -7.643363 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 5.496886 7646.386 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.400842 657 0 -5.0000E+00 5.496886 3.027640 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015266 2 2.9980E-03 -6.237510 6.543798 -99.000000 -99.000000 -7.643708 0.000000 0.000252 0.000133 0.001420 0.000E+00 max_dt finished doing relax num steps relax_to_radiative_core 10 5.497680 7715.813 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.398302 654 0 -2.2907E+00 5.497680 3.027437 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015265 3 1.0230E-02 -6.235216 6.559095 -99.000000 -99.000000 -7.655943 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase waiting for fully convective core to develop 10 1.5286543361269040D-03 20 5.566472 7929.626 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -15.162434 666 0 -7.1821E-01 5.566472 2.978106 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015256 3 1.0633E+00 -6.029600 6.507917 -99.000000 -99.000000 -7.627198 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 20 7.8173674478154709D-08 30 5.678336 8189.867 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -14.758876 694 0 -4.9874E-01 5.678336 2.897168 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015344 4 3.6409E+00 -5.686549 6.402138 -99.000000 -99.000000 -7.557963 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 30 7.8173674922243919D-08 40 5.787666 8455.047 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -14.370773 701 0 -2.8766E-01 5.787666 2.814648 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015398 4 7.8284E+00 -5.354018 6.292454 -99.000000 -99.000000 -7.484746 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol relative mass of radiative core still tiny 40 7.8173673589976289D-08 50 5.894351 8727.101 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995953 734 0 -7.6738E-02 5.894351 2.731140 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 4 1.4610E+01 -5.031217 6.180454 -99.000000 -99.000000 -7.415382 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol finished relax to begin radiative core 50 3.8943397372090938D-01 finished doing relax_to_radiative_core set_initial_number_retries 0 new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name basic.net rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849134888689905E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1 10 5.894356 8693.872 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995933 737 0 -4.2874E+00 5.894356 2.731122 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 2.5959E-04 -5.031201 6.173790 -99.000000 -99.000000 -7.410688 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5027650321794912 rel_E_err 3.1422082736984802D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849114865272980E-002 20 5.894376 8690.935 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995857 736 0 -3.4956E+00 5.894376 2.731119 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 1.8669E-03 -5.031138 6.173197 -99.000000 -99.000000 -7.410255 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5219909716699505 rel_E_err 3.0061387950895482D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849099677115561E-002 30 5.894501 8694.464 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.995413 736 0 -2.7037E+00 5.894501 2.731074 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 1.1819E-02 -5.030757 6.173813 -99.000000 -99.000000 -7.410714 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5062805508137220 rel_E_err 3.1168754566200421D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849157777190895E-002 40 5.895273 8697.400 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.992693 738 0 -1.9119E+00 5.895273 2.730608 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015430 3 7.3439E-02 -5.028418 6.173467 -99.000000 -99.000000 -7.410551 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5163053949054497 rel_E_err 3.0457524701041609D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849288967081624E-002 50 5.899992 8709.384 -99.000000 -99.000000 72.500000 0.000000 0.000000 0.000074 0.998580 -13.976082 739 0 -1.1201E+00 5.899992 2.727087 -99.000000 -99.000000 -99.000000 72.500000 0.998580 0.000610 0.001420 0.015432 4 4.5497E-01 -5.014126 6.168817 -99.000000 -99.000000 -7.407836 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5090862200053508 rel_E_err 3.0968044330096194D-12 save photos/x050 for model 50 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9849595149619225E-002 60 5.916881 8785.118 -99.000000 -99.000000 72.499973 0.000000 0.000000 0.000074 0.998580 -13.916510 741 0 -8.4820E-01 5.916881 2.713722 -99.000000 -99.000000 -4.736373 72.499973 0.998580 0.000610 0.001420 0.015438 4 1.8706E+00 -4.962920 6.157129 -99.000000 -99.000000 -7.402490 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5559311156224762 rel_E_err 2.7801541989991696D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9850879337538784E-002 70 5.936010 8832.358 -99.000000 -99.000000 72.499943 0.000000 0.000000 0.000074 0.998580 -13.848643 740 0 -7.4234E-01 5.936010 2.699466 -99.000000 -99.000000 -4.771360 72.499943 0.998580 0.000610 0.001420 0.015448 5 3.6030E+00 -4.904751 6.137933 -99.000000 -99.000000 -7.392030 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -9.6866490557407232 rel_E_err 2.0575525894625201D-10 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9852264929328131E-002 80 5.954021 8877.158 -99.000000 -99.000000 72.499914 0.000000 0.000000 0.000074 0.998580 -13.784333 741 0 -7.8034E-01 5.954021 2.686755 -99.000000 -99.000000 -4.802877 72.499914 0.998580 0.000610 0.001420 0.015459 5 5.3600E+00 -4.849802 6.121301 -99.000000 -99.000000 -7.383502 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -10.0604147560358506 rel_E_err 8.7013220714321165D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9853298553174339E-002 90 5.972792 8922.038 -99.000000 -99.000000 72.499884 0.000000 0.000000 0.000074 0.998580 -13.716943 748 0 -6.0389E-01 5.972792 2.674460 -99.000000 -99.000000 -4.831872 72.499884 0.998580 0.000610 0.001420 0.015472 5 7.3234E+00 -4.792376 6.105469 -99.000000 -99.000000 -7.375849 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -9.9714543815398500 rel_E_err 1.0679369631589307D-10 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854001386738576E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 5.991036 8964.905 -99.000000 -99.000000 72.499855 0.000000 0.000000 0.000074 0.998580 -13.651112 753 0 -7.1490E-01 5.991036 2.663644 -99.000000 -99.000000 -4.858332 72.499855 0.998580 0.000610 0.001420 0.015486 4 9.3605E+00 -4.736418 6.092164 -99.000000 -99.000000 -7.370078 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6111271265423941 rel_E_err 2.4483464577462865D-12 save LOGS/profile2.data for model 100 save photos/x100 for model 100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854351093068990E-002 110 6.009114 9006.044 -99.000000 -99.000000 72.499827 0.000000 0.000000 0.000074 0.998580 -13.585606 758 0 -6.2863E-01 6.009114 2.654241 -99.000000 -99.000000 -4.879575 72.499827 0.998580 0.000610 0.001420 0.015502 4 1.1501E+01 -4.680848 6.081312 -99.000000 -99.000000 -7.366113 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.5951371794370814 rel_E_err 2.5401702220389372D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854565986199648E-002 120 6.027812 9047.936 -99.000000 -99.000000 72.499796 0.000000 0.000000 0.000074 0.998580 -13.517629 763 0 -6.1035E-01 6.027812 2.646108 -99.000000 -99.000000 -4.897042 72.499796 0.998580 0.000610 0.001420 0.015520 3 1.3837E+01 -4.623275 6.073109 -99.000000 -99.000000 -7.364258 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6205295499540799 rel_E_err 2.3959097234260040D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854946883491196E-002 130 6.045715 9086.396 -99.000000 -99.000000 72.499767 0.000000 0.000000 0.000074 0.998580 -13.452382 758 0 -6.4988E-01 6.045715 2.640024 -99.000000 -99.000000 -4.908392 72.499767 0.998580 0.000610 0.001420 0.015538 3 1.6180E+01 -4.568079 6.068309 -99.000000 -99.000000 -7.364640 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6104011795026292 rel_E_err 2.4524424254619002D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9855816027289413E-002 140 6.063472 9124.060 -99.000000 -99.000000 72.499738 0.000000 0.000000 0.000074 0.998580 -13.387593 764 0 -6.4847E-01 6.063472 2.635780 -99.000000 -99.000000 -4.914039 72.499738 0.998580 0.000610 0.001420 0.015556 3 1.8596E+01 -4.513302 6.067006 -99.000000 -99.000000 -7.367535 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6305935756226777 rel_E_err 2.3410270094870359D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9857570453157080E-002 150 6.081543 9161.031 -99.000000 -99.000000 72.499707 0.000000 0.000000 0.000074 0.998580 -13.321660 762 0 -5.5953E-01 6.081543 2.633412 -99.000000 -99.000000 -4.913746 72.499707 0.998580 0.000610 0.001420 0.015574 3 2.1134E+01 -4.457556 6.069295 -99.000000 -99.000000 -7.373034 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.6361939445096265 rel_E_err 2.3110325132736982D-12 save photos/x150 for model 150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9860722323826138E-002 160 6.100029 9199.425 -99.000000 -99.000000 72.499674 0.000000 0.000000 0.000074 0.998580 -13.254295 765 0 -4.7182E-01 6.100029 2.633014 -99.000000 -99.000000 -4.906952 72.499674 0.998580 0.000610 0.001420 0.015592 3 2.3797E+01 -4.400565 6.075764 -99.000000 -99.000000 -7.381811 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6235370132537561 rel_E_err 2.3793755072620776D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9865844380112894E-002 170 6.118174 9235.113 -99.000000 -99.000000 72.499640 0.000000 0.000000 0.000074 0.998580 -13.188316 772 0 -5.4249E-01 6.118174 2.634589 -99.000000 -99.000000 -4.893851 72.499640 0.998580 0.000610 0.001420 0.015609 3 2.6460E+01 -4.344688 6.085641 -99.000000 -99.000000 -7.392908 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6578408250968018 rel_E_err 2.1986655663090361D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9873151345212622E-002 180 6.136049 9269.098 -99.000000 -99.000000 72.499606 0.000000 0.000000 0.000074 0.998580 -13.123522 770 0 -5.3694E-01 6.136049 2.637864 -99.000000 -99.000000 -4.875724 72.499606 0.998580 0.000610 0.001420 0.015625 3 2.9116E+01 -4.289730 6.098571 -99.000000 -99.000000 -7.406212 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6941736862132224 rel_E_err 2.0222102798709135D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9882906585856197E-002 190 6.153979 9300.774 -99.000000 -99.000000 72.499569 0.000000 0.000000 0.000074 0.998580 -13.058781 769 0 -5.3290E-01 6.153979 2.642632 -99.000000 -99.000000 -4.853099 72.499569 0.998580 0.000610 0.001420 0.015640 3 3.1800E+01 -4.234712 6.114034 -99.000000 -99.000000 -7.421288 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7053765284707669 rel_E_err 1.9707134086982017D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9895515364411608E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 6.171635 9328.786 -99.000000 -99.000000 72.499531 0.000000 0.000000 0.000074 0.998580 -12.995306 772 0 -4.5119E-01 6.171635 2.648486 -99.000000 -99.000000 -4.828235 72.499531 0.998580 0.000610 0.001420 0.015653 3 3.4455E+01 -4.180655 6.130967 -99.000000 -99.000000 -7.437184 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6874640935261542 rel_E_err 2.0536948142254081D-12 save LOGS/profile3.data for model 200 save photos/x200 for model 200 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9910773188268658E-002 210 6.188944 9351.938 -99.000000 -99.000000 72.499490 0.000000 0.000000 0.000074 0.998580 -12.933352 778 0 -5.2805E-01 6.188944 2.655104 -99.000000 -99.000000 -4.800696 72.499490 0.998580 0.000610 0.001420 0.015665 3 3.7065E+01 -4.127777 6.148508 -99.000000 -99.000000 -7.453049 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7050781380230138 rel_E_err 1.9720678908296816D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9928325888549530E-002 220 6.206687 9370.043 -99.000000 -99.000000 72.499446 0.000000 0.000000 0.000074 0.998580 -12.870137 776 0 -6.0512E-01 6.206687 2.662535 -99.000000 -99.000000 -4.771613 72.499446 0.998580 0.000610 0.001420 0.015675 3 3.9745E+01 -4.073702 6.166730 -99.000000 -99.000000 -7.468812 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7159287248232040 rel_E_err 1.9234073671624579D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9948662385843308E-002 230 6.224795 9382.191 -99.000000 -99.000000 72.499398 0.000000 0.000000 0.000074 0.998580 -12.805912 780 0 -6.0261E-01 6.224795 2.670618 -99.000000 -99.000000 -4.742235 72.499398 0.998580 0.000610 0.001420 0.015684 3 4.2487E+01 -4.018640 6.185147 -99.000000 -99.000000 -7.483889 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7154931762696943 rel_E_err 1.9253372961625803D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9971450235593575E-002 240 6.242935 9387.570 -99.000000 -99.000000 72.499346 0.000000 0.000000 0.000074 0.998580 -12.741850 781 0 -5.9932E-01 6.242935 2.679122 -99.000000 -99.000000 -4.713001 72.499346 0.998580 0.000610 0.001420 0.015691 3 4.5245E+01 -3.963600 6.203150 -99.000000 -99.000000 -7.497610 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7291184258292258 rel_E_err 1.8658708254472952D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9995914084484028E-002 250 6.261111 9386.793 -99.000000 -99.000000 72.499291 0.000000 0.000000 0.000074 0.998580 -12.677926 786 0 -5.9607E-01 6.261111 2.687948 -99.000000 -99.000000 -4.684106 72.499291 0.998580 0.000610 0.001420 0.015697 3 4.8022E+01 -3.908565 6.220659 -99.000000 -99.000000 -7.509945 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7318369913041636 rel_E_err 1.8542274611366052D-12 save photos/x250 for model 250 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0021759640473391E-002 260 6.279316 9380.581 -99.000000 -99.000000 72.499231 0.000000 0.000000 0.000074 0.998580 -12.614154 788 0 -5.9226E-01 6.279316 2.697038 -99.000000 -99.000000 -4.655584 72.499231 0.998580 0.000610 0.001420 0.015702 3 5.0822E+01 -3.853552 6.237689 -99.000000 -99.000000 -7.520985 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7508600127341936 rel_E_err 1.7747614521608056D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0048830443722945E-002 270 6.297549 9370.513 -99.000000 -99.000000 72.499166 0.000000 0.000000 0.000074 0.998580 -12.550525 792 0 -5.8793E-01 6.297549 2.706269 -99.000000 -99.000000 -4.627491 72.499166 0.998580 0.000610 0.001420 0.015706 3 5.3648E+01 -3.798560 6.254286 -99.000000 -99.000000 -7.531026 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7424408617717386 rel_E_err 1.8095022948584382D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0076944732621464E-002 280 6.315808 9356.956 -99.000000 -99.000000 72.499096 0.000000 0.000000 0.000074 0.998580 -12.487034 787 0 -5.8310E-01 6.315808 2.715600 -99.000000 -99.000000 -4.599882 72.499096 0.998580 0.000610 0.001420 0.015708 3 5.6504E+01 -3.743587 6.270432 -99.000000 -99.000000 -7.540117 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7632251549192848 rel_E_err 1.7249433833163776D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0105763424258135E-002 290 6.334092 9342.078 -99.000000 -99.000000 72.499021 0.000000 0.000000 0.000074 0.998580 -12.423670 793 0 -5.7783E-01 6.334092 2.724896 -99.000000 -99.000000 -4.572666 72.499021 0.998580 0.000610 0.001420 0.015709 3 5.9393E+01 -3.688629 6.286260 -99.000000 -99.000000 -7.548751 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7346209580477954 rel_E_err 1.8423792850328164D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0134830255191347E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 6.352742 9325.447 -99.000000 -99.000000 72.498939 0.000000 0.000000 0.000074 0.998580 -12.359254 797 0 -4.9346E-01 6.352742 2.734260 -99.000000 -99.000000 -4.546099 72.498939 0.998580 0.000610 0.001420 0.015709 3 6.2374E+01 -3.632667 6.301893 -99.000000 -99.000000 -7.556944 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7620091753285703 rel_E_err 1.7297798138145316D-12 save LOGS/profile4.data for model 300 save photos/x300 for model 300 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0164186446981641E-002 310 6.371810 9308.721 -99.000000 -99.000000 72.498848 0.000000 0.000000 0.000074 0.998580 -12.293604 801 0 -4.0865E-01 6.371810 2.743579 -99.000000 -99.000000 -4.519773 72.498848 0.998580 0.000610 0.001420 0.015708 4 6.5462E+01 -3.575540 6.317412 -99.000000 -99.000000 -7.565056 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7559386382572892 rel_E_err 1.7541283262371273D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0193413499567708E-002 320 6.390498 9292.332 -99.000000 -99.000000 72.498752 0.000000 0.000000 0.000074 0.998580 -12.229449 810 0 -4.8101E-01 6.390498 2.752412 -99.000000 -99.000000 -4.493850 72.498752 0.998580 0.000610 0.001420 0.015707 3 6.8531E+01 -3.519632 6.332017 -99.000000 -99.000000 -7.572594 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7642072331590146 rel_E_err 1.7210471435417108D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0220817739452245E-002 330 6.409031 9276.578 -99.000000 -99.000000 72.498649 0.000000 0.000000 0.000074 0.998580 -12.166003 821 0 -5.1316E-01 6.409031 2.760864 -99.000000 -99.000000 -4.469394 72.498649 0.998580 0.000610 0.001420 0.015704 3 7.1623E+01 -3.464266 6.345974 -99.000000 -99.000000 -7.579802 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7445290345094193 rel_E_err 1.8008227374423568D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0246401604260057E-002 340 6.427498 9261.923 -99.000000 -99.000000 72.498540 0.000000 0.000000 0.000074 0.998580 -12.102943 833 0 -5.2495E-01 6.427498 2.768896 -99.000000 -99.000000 -4.446205 72.498540 0.998580 0.000610 0.001420 0.015700 3 7.4756E+01 -3.409163 6.359291 -99.000000 -99.000000 -7.586765 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7711644128554145 rel_E_err 1.6936964886090882D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0269934804009578E-002 350 6.445942 9248.179 -99.000000 -99.000000 72.498423 0.000000 0.000000 0.000074 0.998580 -12.040116 837 0 -5.2636E-01 6.445942 2.776564 -99.000000 -99.000000 -4.424003 72.498423 0.998580 0.000610 0.001420 0.015696 3 7.7941E+01 -3.354197 6.372048 -99.000000 -99.000000 -7.593503 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7848999594745667 rel_E_err 1.6409677295736643D-12 save photos/x350 for model 350 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0291223598779767E-002 360 6.464380 9236.013 -99.000000 -99.000000 72.498297 0.000000 0.000000 0.000074 0.998580 -11.977448 835 0 -5.2233E-01 6.464380 2.783806 -99.000000 -99.000000 -4.402889 72.498297 0.998580 0.000610 0.001420 0.015691 3 8.1187E+01 -3.299306 6.384243 -99.000000 -99.000000 -7.600128 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7678254655630976 rel_E_err 1.7067681678547714D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0310077371647723E-002 370 6.482822 9224.808 -99.000000 -99.000000 72.498163 0.000000 0.000000 0.000074 0.998580 -11.914900 838 0 -5.1535E-01 6.482822 2.790673 -99.000000 -99.000000 -4.382812 72.498163 0.998580 0.000610 0.001420 0.015685 3 8.4500E+01 -3.244463 6.395869 -99.000000 -99.000000 -7.606523 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7746092833816274 rel_E_err 1.6803150476293143D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0326315456100510E-002 380 6.501269 9215.142 -99.000000 -99.000000 72.498019 0.000000 0.000000 0.000074 0.998580 -11.852448 844 0 -5.0667E-01 6.501269 2.797148 -99.000000 -99.000000 -4.363691 72.498019 0.998580 0.000610 0.001420 0.015678 3 8.7887E+01 -3.189652 6.406999 -99.000000 -99.000000 -7.612836 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7653161242623270 rel_E_err 1.7166583714651369D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0339807954824375E-002 390 6.520058 9206.701 -99.000000 -99.000000 72.497863 0.000000 0.000000 0.000074 0.998580 -11.788954 848 0 -4.1813E-01 6.520058 2.803327 -99.000000 -99.000000 -4.345546 72.497863 0.998580 0.000610 0.001420 0.015671 3 9.1416E+01 -3.133874 6.417763 -99.000000 -99.000000 -7.619103 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7514384465030624 rel_E_err 1.7723992333136147D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0350579498719380E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 400 6.539592 9199.483 -99.000000 -99.000000 72.497689 0.000000 0.000000 0.000074 0.998580 -11.723042 851 0 -4.0731E-01 6.539592 2.809354 -99.000000 -99.000000 -4.327310 72.497689 0.998580 0.000610 0.001420 0.015664 3 9.5177E+01 -3.075928 6.428455 -99.000000 -99.000000 -7.625531 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7708191971528535 rel_E_err 1.6950433237431555D-12 save LOGS/profile5.data for model 400 save photos/x400 for model 400 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0358518480989096E-002 410 6.558309 9193.734 -99.000000 -99.000000 72.497511 0.000000 0.000000 0.000074 0.998580 -11.659960 853 0 -4.5546E-01 6.558309 2.814783 -99.000000 -99.000000 -4.310513 72.497511 0.998580 0.000610 0.001420 0.015656 3 9.8873E+01 -3.020436 6.438228 -99.000000 -99.000000 -7.631554 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7625599016484053 rel_E_err 1.7275876802502050D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0363000573842245E-002 420 6.576850 9189.960 -99.000000 -99.000000 72.497324 0.000000 0.000000 0.000074 0.998580 -11.597522 859 0 -4.5885E-01 6.576850 2.819759 -99.000000 -99.000000 -4.294873 72.497324 0.998580 0.000610 0.001420 0.015648 3 1.0263E+02 -2.965485 6.447465 -99.000000 -99.000000 -7.637530 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7351870267374867 rel_E_err 1.8399794529171515D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0364346627174277E-002 430 6.595688 9187.516 -99.000000 -99.000000 72.497121 0.000000 0.000000 0.000074 0.998580 -11.534130 871 0 -3.7160E-01 6.595688 2.824450 -99.000000 -99.000000 -4.280188 72.497121 0.998580 0.000610 0.001420 0.015639 3 1.0655E+02 -2.909676 6.456386 -99.000000 -99.000000 -7.643507 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7397927001399225 rel_E_err 1.8205696556881987D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0362556471606155E-002 440 6.615244 9187.104 -99.000000 -86.081433 72.496897 0.000000 0.000000 0.000074 0.998580 -11.468345 887 0 -3.6082E-01 6.615244 2.828906 -99.000000 -99.000000 -4.265504 72.496897 0.998580 0.000610 0.001420 0.015630 3 1.1073E+02 -2.851747 6.465221 -86.081433 -99.000000 -7.649771 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7143853211214264 rel_E_err 1.9302549679280608D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0357303884001803E-002 450 6.633964 9187.956 -99.000000 -84.115355 72.496670 0.000000 0.000000 0.000074 0.998580 -11.405385 896 0 -4.0775E-01 6.633964 2.832883 -99.000000 -99.000000 -4.251972 72.496670 0.998580 0.000610 0.001420 0.015622 3 1.1485E+02 -2.796299 6.473336 -84.115355 -99.000000 -7.655742 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7877328525579621 rel_E_err 1.6302985693617292D-12 save photos/x450 for model 450 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0349113304720668E-002 460 6.652501 9191.209 -99.000000 -82.553747 72.496431 0.000000 0.000000 0.000074 0.998580 -11.343048 906 0 -4.0988E-01 6.652501 2.836353 -99.000000 -99.000000 -4.239704 72.496431 0.998580 0.000610 0.001420 0.015613 3 1.1905E+02 -2.741395 6.480889 -82.553747 -99.000000 -7.661731 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7659095063418047 rel_E_err 1.7143144808864238D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0337948574656741E-002 470 6.671329 9196.002 -99.000000 -80.989626 72.496174 0.000000 0.000000 0.000074 0.998580 -11.279745 917 0 -3.2154E-01 6.671329 2.839614 -82.672896 -99.000000 -4.227980 72.496174 0.998580 0.000610 0.001420 0.015605 3 1.2344E+02 -2.685634 6.488318 -80.998726 -99.000000 -7.667914 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7401492534974565 rel_E_err 1.8190755915055985D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0323550362106355E-002 480 6.690870 9203.993 -99.000000 -79.397527 72.495892 0.000000 0.000000 0.000074 0.998580 -11.214059 934 0 -3.0938E-01 6.690870 2.842449 -81.025265 -99.000000 -4.216692 72.495892 0.998580 0.000610 0.001420 0.015595 3 1.2815E+02 -2.627766 6.495496 -79.407883 -99.000000 -7.674502 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7462421047913619 rel_E_err 1.7937334010930717D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0305295420967554E-002 490 6.709576 9214.133 -99.000000 -77.897119 72.495606 0.000000 0.000000 0.000074 0.998580 -11.151191 944 0 -3.5482E-01 6.709576 2.844803 -79.570980 -99.000000 -4.206331 72.495606 0.998580 0.000610 0.001420 0.015587 3 1.3279E+02 -2.572374 6.502118 -77.906421 -99.000000 -7.681113 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7760800046834824 rel_E_err 1.6746343505026071D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0284743808432330E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 500 6.728101 9227.365 -99.000000 -76.431571 72.495307 0.000000 0.000000 0.000074 0.998580 -11.088948 955 0 -3.5550E-01 6.728101 2.846613 -78.152833 -99.000000 -4.197190 72.495307 0.998580 0.000610 0.001420 0.015578 3 1.3754E+02 -2.517525 6.508231 -76.439901 -99.000000 -7.687972 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7608868471342376 rel_E_err 1.7342557890128763D-12 save LOGS/profile6.data for model 500 save photos/x500 for model 500 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0261444494192448E-002 510 6.746914 9244.510 -99.000000 -74.963482 72.494987 0.000000 0.000000 0.000074 0.998580 -11.025750 963 0 -2.6578E-01 6.746914 2.847879 -76.731626 -99.000000 -4.188981 72.494987 0.998580 0.000610 0.001420 0.015569 4 1.4253E+02 -2.461826 6.513986 -74.970953 -99.000000 -7.695380 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7605746518869214 rel_E_err 1.7355029176042271D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0234818178156561E-002 520 6.766438 9268.180 -99.000000 -73.461320 72.494637 0.000000 0.000000 0.000074 0.998580 -10.960182 981 0 -2.5210E-01 6.766438 2.848347 -75.276624 -99.000000 -4.181926 72.494637 0.998580 0.000610 0.001420 0.015560 4 1.4789E+02 -2.404029 6.519365 -73.468016 -99.000000 -7.703890 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7526595584930966 rel_E_err 1.7674227526052640D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0203827344643392E-002 530 6.785124 9296.862 -99.000000 -72.043645 72.494285 0.000000 0.000000 0.000074 0.998580 -10.897430 992 0 -2.9548E-01 6.785124 2.847890 -73.902653 -99.000000 -4.176498 72.494285 0.998580 0.000610 0.001420 0.015551 4 1.5320E+02 -2.348712 6.523818 -72.049695 -99.000000 -7.712909 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7726106407530455 rel_E_err 1.6880657534951827D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0171333181296548E-002 540 6.803624 9334.291 -99.000000 -70.659236 72.493920 0.000000 0.000000 0.000074 0.998580 -10.835306 1002 0 -2.9399E-01 6.803624 2.846190 -72.560131 -99.000000 -4.173209 72.493920 0.998580 0.000610 0.001420 0.015542 4 1.5866E+02 -2.293946 6.527398 -70.664726 -99.000000 -7.723373 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7551424859312377 rel_E_err 1.7573469584663420D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0136449077158732E-002 550 6.822400 9384.265 -99.000000 -69.273276 72.493533 0.000000 0.000000 0.000074 0.998580 -10.772245 1015 0 -2.0194E-01 6.822400 2.842633 -71.215281 -99.000000 -4.172608 72.493533 0.998580 0.000610 0.001420 0.015534 4 1.6442E+02 -2.238357 6.529560 -69.278268 -99.000000 -7.735960 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7683440195410967 rel_E_err 1.7047314778025834D-12 save photos/x550 for model 550 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0098256138725346E-002 560 6.841615 9456.172 -99.000000 -67.874614 72.493121 0.000000 0.000000 0.000074 0.998580 -10.707685 1010 0 -1.9732E-01 6.841615 2.835981 -69.857223 -99.000000 -4.177858 72.493121 0.998580 0.000610 0.001420 0.015525 4 1.7058E+02 -2.181455 6.529517 -67.879158 -99.000000 -7.752742 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7517323369676969 rel_E_err 1.7712002426516048D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0056732731068894E-002 570 6.859838 9549.137 -99.000000 -66.566320 72.492720 0.000000 0.000000 0.000074 0.998580 -10.646410 1033 0 -2.3504E-01 6.859838 2.826556 -68.586062 -99.000000 -4.187430 72.492720 0.998580 0.000610 0.001420 0.015517 5 1.7670E+02 -2.127468 6.527661 -66.570489 -99.000000 -7.774835 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7484441792777705 rel_E_err 1.7846613598269426D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 6.0016096127223591E-002 580 6.877916 9686.904 -99.000000 -65.285677 72.492314 0.000000 0.000000 0.000074 0.998580 -10.585550 1043 0 -1.9160E-01 6.877916 2.811217 -67.340930 -99.000000 -4.206164 72.492314 0.998580 0.000610 0.001420 0.015509 5 1.8309E+02 -2.073878 6.521867 -65.289518 -99.000000 -7.809095 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7544086461614299 rel_E_err 1.7603189079188648D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9975118951030311E-002 590 6.895067 9901.056 -99.000000 -64.086401 72.491928 0.000000 0.000000 0.000074 0.998580 -10.527712 1061 0 -1.8275E-01 6.895067 2.787857 -66.174113 -99.000000 -4.234430 72.491928 0.998580 0.000610 0.001420 0.015502 5 1.8949E+02 -2.022991 6.513135 -64.089965 -99.000000 -7.872796 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7562390698055435 rel_E_err 1.7529152938979148D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9937137881309298E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 600 6.910064 1.031E+04 -99.000000 -63.050091 72.491598 0.000000 0.000000 0.000074 0.998580 -10.477045 1052 0 -2.9946E-01 6.910064 2.750246 -65.165203 -99.000000 -4.270783 72.491598 0.998580 0.000610 0.001420 0.015497 5 1.9541E+02 -1.978454 6.507857 -63.053435 -99.000000 -8.036972 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7661031644540213 rel_E_err 1.7135502139864196D-12 save LOGS/profile7.data for model 600 save photos/x600 for model 600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9904870457311854E-002 610 6.920066 1.127E+04 -99.000000 -62.365251 72.491393 0.000000 0.000000 0.000074 0.998580 -10.443219 1024 0 -4.4699E-01 6.920066 2.671234 -64.498139 -99.000000 -4.332541 72.491393 0.998580 0.000610 0.001420 0.015493 7 1.9949E+02 -1.948735 6.504647 -62.368461 -99.000000 -8.548882 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7556569986605872 rel_E_err 1.7552662458728834D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9883641349604715E-002 620 6.927846 1.413E+04 -99.000000 -61.836012 72.491260 0.000000 0.000000 0.000074 0.998580 -10.416865 1052 0 -4.9481E-01 6.927846 2.467508 -63.982440 -99.000000 -4.419727 72.491260 0.998580 0.000610 0.001420 0.015491 5 2.0278E+02 -1.925598 6.490353 -61.839123 -99.000000 -10.142942 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7496541839535205 rel_E_err 1.7796959660444474D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9869970332655911E-002 630 6.935478 1.907E+04 -99.000000 -61.319855 72.491116 0.000000 0.000000 0.000074 0.998580 -10.390863 1043 0 -3.5046E-01 6.935478 2.183804 -63.479272 -99.000000 -4.372762 72.491116 0.998580 0.000610 0.001420 0.015489 5 2.0626E+02 -1.902838 6.443586 -61.322874 -99.000000 -9.771199 0.000000 0.000252 0.000133 0.001420 0.000E+00 varcontrol log_rel_run_E_err -11.7534216426670355 rel_E_err 1.7643240629188975D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9863587909849351E-002 640 6.951854 2.085E+04 -99.000000 -60.222131 72.490772 0.000000 0.000000 0.000074 0.998580 -10.334655 1041 0 -6.4763E-02 6.951854 2.095568 -62.408485 -99.000000 -4.380917 72.490772 0.998580 0.000610 0.001420 0.015488 3 2.1455E+02 -1.853818 6.422662 -60.224967 -99.000000 -9.597841 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7708573782108967 rel_E_err 1.6948943103307345D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9859406563358544E-002 650 6.971115 2.149E+04 -99.000000 -58.947850 72.490339 0.000000 0.000000 0.000074 0.998580 -10.268480 1035 0 1.0838E-01 6.971115 2.069666 -61.164545 -99.000000 -4.366784 72.490339 0.998580 0.000610 0.001420 0.015487 3 2.2477E+02 -1.796133 6.423156 -58.950494 -99.000000 -9.545562 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7098272846717002 rel_E_err 1.9506201910630895D-12 save photos/x650 for model 650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9854767690108522E-002 660 6.989825 2.199E+04 -99.000000 -57.727098 72.489886 0.000000 0.000000 0.000074 0.998580 -10.204197 1033 0 6.9151E-03 6.989825 2.051071 -59.971918 -99.000000 -4.350110 72.489886 0.998580 0.000610 0.001420 0.015486 3 2.3510E+02 -1.740093 6.425705 -57.729576 -99.000000 -9.509040 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7394930034885263 rel_E_err 1.8218264225939360D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9850092314935419E-002 670 7.008177 2.244E+04 -99.000000 -51.272621 72.489407 0.000000 0.000000 0.000074 0.998580 -10.141165 1032 0 -6.7145E-03 7.008177 2.035142 -58.817074 -12.806214 -4.333638 72.489407 0.998580 0.000610 0.001420 0.015485 3 2.4560E+02 -1.685134 6.428885 -51.272621 -99.000000 -9.478027 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7777738423837093 rel_E_err 1.6681156528945341D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9845346975753902E-002 680 7.026450 2.286E+04 -99.000000 -49.907166 72.488894 0.000000 0.000000 0.000074 0.998580 -10.078427 1034 0 1.2433E-03 7.026450 2.020620 -57.681601 -10.926437 -4.317077 72.488894 0.998580 0.000610 0.001420 0.015483 3 2.5643E+02 -1.630418 6.432430 -49.907166 -99.000000 -9.450238 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7522691784630666 rel_E_err 1.7690121735364962D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9840474954808189E-002 690 7.045760 2.330E+04 -99.000000 -48.774980 72.488310 0.000000 0.000000 0.000074 0.998580 -10.012162 1036 0 1.7187E-01 7.045760 2.005981 -56.497115 -9.998877 -4.300083 72.488310 0.998580 0.000610 0.001420 0.015482 3 2.6829E+02 -1.572608 6.436389 -48.774980 -99.000000 -9.423323 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7513711972823138 rel_E_err 1.7726737053620522D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9835175127674813E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 700 7.064497 2.374E+04 -99.000000 -47.712936 72.487647 0.000000 0.000000 0.000074 0.998580 -9.947893 1035 0 6.8894E-02 7.064497 1.991829 -55.362727 -9.382768 -4.140215 72.487647 0.998580 0.000610 0.001420 0.015481 3 2.8021E+02 -1.516525 6.440228 -47.712936 -99.000000 -9.398911 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7691600935715108 rel_E_err 1.7015311589216173D-12 save LOGS/profile8.data for model 700 save photos/x700 for model 700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9829900461901009E-002 710 7.082867 2.418E+04 -99.000000 -46.687686 72.486764 0.000000 0.000000 0.000074 0.998580 -9.884913 1034 0 5.4799E-02 7.082867 1.977792 -54.264617 -8.905938 -4.134547 72.486764 0.998580 0.000610 0.001420 0.015479 3 2.9232E+02 -1.461550 6.443975 -46.687686 -99.000000 -9.376896 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7675390421714887 rel_E_err 1.7078941770205834D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9824651857900757E-002 720 7.101153 2.464E+04 -99.000000 -45.680835 72.485842 0.000000 0.000000 0.000074 0.998580 -9.822247 1035 0 6.2743E-02 7.101153 1.963077 -53.185069 -8.504713 -4.129170 72.485842 0.998580 0.000610 0.001420 0.015477 3 3.0479E+02 -1.406834 6.447532 -45.680835 -99.000000 -9.356734 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7735127418801095 rel_E_err 1.6845630022117135D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9819265015462621E-002 730 7.120471 2.517E+04 -99.000000 -44.631701 72.484820 0.000000 0.000000 0.000074 0.998580 -9.756075 1037 0 2.3364E-01 7.120471 1.946257 -52.059026 -8.133433 -4.124112 72.484820 0.998580 0.000610 0.001420 0.015475 3 3.1846E+02 -1.349042 6.450995 -44.631701 -99.000000 -9.338173 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7702440135344428 rel_E_err 1.6972897420189006D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9813384353095453E-002 740 7.139210 2.574E+04 -99.000000 -43.628026 72.483780 0.000000 0.000000 0.000074 0.998580 -9.691908 1036 0 1.3140E-01 7.139210 1.928383 -50.980402 -7.810225 -4.119417 72.483780 0.998580 0.000610 0.001420 0.015473 3 3.3222E+02 -1.292988 6.453996 -43.628026 -99.000000 -9.324066 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7749883856003361 rel_E_err 1.6788489152197164D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9807471446201375E-002 750 7.157576 2.636E+04 -99.000000 -42.657495 72.482712 0.000000 0.000000 0.000074 0.998580 -9.629034 1040 0 1.1828E-01 7.157576 1.909102 -49.935639 -7.520191 -4.115513 72.482712 0.998580 0.000610 0.001420 0.015471 3 3.4621E+02 -1.238051 6.456541 -42.657495 -99.000000 -9.315508 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7722239845160583 rel_E_err 1.6895693226592106D-12 save photos/x750 for model 750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9801458918468671E-002 760 7.175854 2.704E+04 -99.000000 -41.704431 72.481599 0.000000 0.000000 0.000074 0.998580 -9.566475 1047 0 1.2743E-01 7.175854 1.887999 -48.907234 -7.252332 -4.112282 72.481599 0.998580 0.000610 0.001420 0.015470 3 3.6067E+02 -1.183381 6.458651 -41.704431 -99.000000 -9.327636 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7671536600943973 rel_E_err 1.7094103922862933D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9795244100798305E-002 770 7.195155 2.783E+04 -99.000000 -40.711636 72.480368 0.000000 0.000000 0.000074 0.998580 -9.500422 1050 0 2.9940E-01 7.195155 1.863791 -47.832192 -6.987580 -4.109690 72.480368 0.998580 0.000610 0.001420 0.015467 3 3.7656E+02 -1.125650 6.460387 -40.711636 -99.000000 -9.346372 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7536289151727065 rel_E_err 1.7634822179681226D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9788411848298195E-002 780 7.213875 2.867E+04 -99.000000 -39.761987 72.479118 0.000000 0.000000 0.000074 0.998580 -9.436363 1052 0 1.9882E-01 7.213875 1.838482 -46.798804 -6.745214 -4.107746 72.479118 0.998580 0.000610 0.001420 0.015465 3 3.9260E+02 -1.069656 6.461602 -39.761987 -99.000000 -9.397930 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7631466780731238 rel_E_err 1.7252551080869951D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9781495053878822E-002 790 7.232220 2.957E+04 -99.000000 -38.843772 72.477838 0.000000 0.000000 0.000074 0.998580 -9.373582 1058 0 1.8722E-01 7.232220 1.812153 -45.793398 -6.518864 -4.106541 72.477838 0.998580 0.000610 0.001420 0.015464 3 4.0898E+02 -1.014776 6.462360 -38.843772 -99.000000 -9.496092 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7515731542842499 rel_E_err 1.7718495626323735D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9774415735414338E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 800 7.250475 3.051E+04 -99.000000 -37.942148 72.476509 0.000000 0.000000 0.000074 0.998580 -9.311104 1060 0 1.9779E-01 7.250475 1.785170 -44.798862 -6.302600 -4.105940 72.476509 0.998580 0.000610 0.001420 0.015462 4 4.2595E+02 -0.960160 6.462727 -37.942148 -99.000000 -9.710599 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7685871216286291 rel_E_err 1.7037774988085144D-12 save LOGS/profile9.data for model 800 save photos/x800 for model 800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9767051352696957E-002 810 7.269749 3.160E+04 -99.000000 -37.003077 72.475043 0.000000 0.000000 0.000074 0.998580 -9.245129 1066 0 3.7082E-01 7.269749 1.754727 -43.754193 -6.082275 -4.105851 72.475043 0.998580 0.000610 0.001420 0.015460 4 4.4465E+02 -0.902487 6.462746 -37.003077 -99.000000 -9.902867 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7658064045164039 rel_E_err 1.7147215087016067D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9758902684929435E-002 820 7.288442 3.273E+04 -99.000000 -36.104762 72.473559 0.000000 0.000000 0.000074 0.998580 -9.181126 1066 0 2.7160E-01 7.288442 1.724057 -42.745664 -5.875228 -4.106212 72.473559 0.998580 0.000610 0.001420 0.015459 4 4.6360E+02 -0.846541 6.462492 -36.104762 -99.000000 -10.011103 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7455276568246187 rel_E_err 1.7966866595852752D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9750599491821314E-002 830 7.306762 3.390E+04 -99.000000 -35.236089 72.472042 0.000000 0.000000 0.000074 0.998580 -9.118384 1068 0 2.6105E-01 7.306762 1.693317 -41.761268 -5.677868 -4.106851 72.472042 0.998580 0.000610 0.001420 0.015457 3 4.8299E+02 -0.791699 6.462055 -35.236089 -99.000000 -10.041169 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7582035727967433 rel_E_err 1.7450040015741061D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9742051635346252E-002 840 7.324997 3.512E+04 -99.000000 -34.382786 72.470468 0.000000 0.000000 0.000074 0.998580 -9.055913 1074 0 2.7275E-01 7.324997 1.662353 -40.784737 -5.486405 -4.107666 72.470468 0.998580 0.000610 0.001420 0.015456 3 5.0314E+02 -0.737127 6.461504 -34.382786 -99.000000 -10.002737 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7608739211614726 rel_E_err 1.7343074067000289D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9733150515162356E-002 850 7.344264 3.643E+04 -99.000000 -33.493322 72.468733 0.000000 0.000000 0.000074 0.998580 -8.989882 1076 0 4.4674E-01 7.344264 1.630050 -39.755038 -5.289169 -4.108608 72.468733 0.998580 0.000610 0.001420 0.015453 3 5.2539E+02 -0.679504 6.460840 -33.493322 -99.000000 -10.005725 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7571941575864471 rel_E_err 1.7490645693691314D-12 save photos/x850 for model 850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9723546833679919E-002 860 7.362960 3.774E+04 -99.000000 -32.641957 72.466976 0.000000 0.000000 0.000074 0.998580 -8.925770 1072 0 3.4840E-01 7.362960 1.599090 -38.754850 -5.102531 -4.109609 72.466976 0.998580 0.000610 0.001420 0.015451 3 5.4799E+02 -0.623584 6.460201 -32.641957 -99.000000 -9.933044 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7708228320008281 rel_E_err 1.6950291370581626D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9714347615543735E-002 870 7.381278 3.904E+04 -99.000000 -31.818887 72.465180 0.000000 0.000000 0.000074 0.998580 -8.862920 1075 0 3.3788E-01 7.381278 1.569391 -37.768552 -4.924043 -4.110507 72.465180 0.998580 0.000610 0.001420 0.015450 3 5.7114E+02 -0.568740 6.459611 -31.818888 -99.000000 -9.855857 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7750671585349469 rel_E_err 1.6785444308930511D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9705551119568552E-002 880 7.399495 4.034E+04 -99.000000 -31.011177 72.463319 0.000000 0.000000 0.000074 0.998580 -8.800400 1077 0 3.4882E-01 7.399495 1.540700 -36.772629 -4.750675 -4.111305 72.463319 0.998580 0.000610 0.001420 0.015450 3 5.9516E+02 -0.514138 6.459087 -31.011178 -99.000000 -9.775370 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7540151780829820 rel_E_err 1.7619144684905638D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9696804792407424E-002 890 7.418724 4.173E+04 -99.000000 -30.170046 72.461270 0.000000 0.000000 0.000074 0.998580 -8.734395 1077 0 5.2209E-01 7.418724 1.511120 -35.689557 -4.571862 -4.111996 72.461270 0.998580 0.000610 0.001420 0.015449 3 6.2165E+02 -0.456475 6.458612 -30.170047 -99.000000 -9.686217 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7649708312368517 rel_E_err 1.7180237718740402D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9687214591420970E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 900 7.437378 4.308E+04 -99.000000 -29.365149 72.459197 0.000000 0.000000 0.000074 0.998580 -8.670360 1079 0 4.2291E-01 7.437378 1.483301 -34.589833 -4.402203 -4.112575 72.459197 0.998580 0.000610 0.001420 0.015449 3 6.4850E+02 -0.400528 6.458254 -29.365152 -99.000000 -9.603780 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7594124428267985 rel_E_err 1.7401534912655354D-12 save LOGS/profile10.data for model 900 save photos/x900 for model 900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9677343567186215E-002 910 7.455664 4.440E+04 -99.000000 -28.586543 72.457079 0.000000 0.000000 0.000074 0.998580 -8.607586 1091 0 4.1215E-01 7.455664 1.456980 -33.461327 -4.239267 -4.112978 72.457079 0.998580 0.000610 0.001420 0.015449 3 6.7597E+02 -0.345677 6.457996 -28.586548 -99.000000 -9.620480 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7829536490919331 rel_E_err 1.6483383041918063D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9667016053742493E-002 920 7.473865 4.573E+04 -99.000000 -27.821661 72.454882 0.000000 0.000000 0.000074 0.998580 -8.545106 1092 0 4.2312E-01 7.473865 1.431224 -32.311705 -4.080225 -4.113240 72.454882 0.998580 0.000610 0.001420 0.015449 3 7.0447E+02 -0.291076 6.457829 -27.821675 -99.000000 -9.554953 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7643499723690379 rel_E_err 1.7204815813396734D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9656029890142390E-002 930 7.493089 4.716E+04 -99.000000 -27.024619 72.452461 0.000000 0.000000 0.000074 0.998580 -8.479126 1094 0 5.9624E-01 7.493089 1.404448 -31.097363 -3.915524 -4.113386 72.452461 0.998580 0.000610 0.001420 0.015449 3 7.3590E+02 -0.233404 6.457730 -27.024656 -99.000000 -9.486392 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7553348857451034 rel_E_err 1.7565685964150009D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9643612990577230E-002 940 7.511739 4.856E+04 -99.000000 -26.261771 72.450010 0.000000 0.000000 0.000074 0.998580 -8.415122 1096 0 4.9680E-01 7.511739 1.378997 -29.929839 -3.758872 -4.113431 72.450010 0.998580 0.000610 0.001420 0.015449 3 7.6774E+02 -0.177448 6.457715 -26.261864 -99.000000 -9.420912 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7766080417776102 rel_E_err 1.6725994830535014D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9630726953576650E-002 950 7.530022 4.995E+04 -99.000000 -25.523696 72.447503 0.000000 0.000000 0.000074 0.998580 -8.352388 1100 0 4.8582E-01 7.530022 1.354473 -28.801914 -3.608000 -4.113373 72.447503 0.998580 0.000610 0.001420 0.015449 3 8.0029E+02 -0.122589 6.457759 -25.523925 -99.000000 -9.357339 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7660633615542114 rel_E_err 1.7137072673128405D-12 save photos/x950 for model 950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9617264415022943E-002 960 7.548221 5.135E+04 -99.000000 -24.798404 72.444901 0.000000 0.000000 0.000074 0.998580 -8.289954 1100 0 4.9660E-01 7.548221 1.330470 -27.701962 -3.459915 -4.113245 72.444901 0.998580 0.000610 0.001420 0.015449 3 8.3406E+02 -0.067980 6.457848 -24.798947 -99.000000 -9.293887 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7696061889776669 rel_E_err 1.6997842900037841D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9603025271432443E-002 970 7.567443 5.286E+04 -99.000000 -24.042155 72.442033 0.000000 0.000000 0.000074 0.998580 -8.224028 1100 0 6.6958E-01 7.567443 1.305388 -26.568849 -3.305188 -4.113065 72.442033 0.998580 0.000610 0.001420 0.015450 3 8.7127E+02 -0.010301 6.457969 -24.043448 -99.000000 -9.226357 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7493961418858319 rel_E_err 1.7807537112011006D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9587056748217050E-002 980 7.586091 5.433E+04 -99.000000 -23.317501 72.439128 0.000000 0.000000 0.000074 0.998580 -8.160084 1114 0 5.6997E-01 7.586091 1.281564 -25.498926 -3.156237 -4.112843 72.439128 0.998580 0.000610 0.001420 0.015450 3 9.0895E+02 0.045661 6.458122 -23.320371 -99.000000 -9.261122 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7647017125059321 rel_E_err 1.7190887074850325D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9570627664866670E-002 990 7.604373 5.582E+04 -99.000000 -22.614838 72.436156 0.000000 0.000000 0.000074 0.998580 -8.097413 1113 0 5.5887E-01 7.604373 1.258305 -24.478071 -3.010946 -4.112567 72.436156 0.998580 0.000610 0.001420 0.015450 3 9.4747E+02 0.100524 6.458308 -22.620829 -99.000000 -9.206087 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7424202452036646 rel_E_err 1.8095881965087927D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9553607339868572E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1000 7.622570 5.732E+04 -99.000000 -21.921621 72.433072 0.000000 0.000000 0.000074 0.998580 -8.035048 1115 0 5.6956E-01 7.622570 1.235358 -23.488876 -2.866770 -4.112252 72.433072 0.998580 0.000610 0.001420 0.015450 3 9.8742E+02 0.155137 6.458521 -21.933546 -99.000000 -9.151430 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7589018875355311 rel_E_err 1.7422004134363562D-12 save LOGS/profile11.data for model 1000 save photos/1000 for model 1000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9535747332801134E-002 1010 7.641790 5.893E+04 -99.000000 -21.193799 72.429672 0.000000 0.000000 0.000074 0.998580 -7.969198 1116 0 7.4246E-01 7.641790 1.211385 -22.472393 -2.714778 -4.111893 72.429672 0.998580 0.000610 0.001420 0.015450 3 1.0314E+03 0.212821 6.458765 -21.217289 -99.000000 -9.093578 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6799494842788452 rel_E_err 2.0895391651166380D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9515867750305700E-002 1020 7.660438 6.051E+04 -99.000000 -20.488614 72.426226 0.000000 0.000000 0.000074 0.998580 -7.905331 1131 0 6.4272E-01 7.660438 1.188473 -21.513057 -2.567514 -4.111490 72.426226 0.998580 0.000610 0.001420 0.015451 3 1.0760E+03 0.268787 6.459037 -20.531738 -99.000000 -9.114714 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7082084720669926 rel_E_err 1.9579046053766322D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9495554350098706E-002 1030 7.678718 6.210E+04 -99.000000 -19.794131 72.422702 0.000000 0.000000 0.000074 0.998580 -7.842739 1130 0 6.3148E-01 7.678718 1.166181 -20.597303 -2.423329 -4.111052 72.422702 0.998580 0.000610 0.001420 0.015451 3 1.1215E+03 0.323656 6.459328 -19.868476 -99.000000 -9.066938 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6987662646949993 rel_E_err 2.0009384758358891D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9474631335831203E-002 1040 7.696915 6.370E+04 -99.000000 -19.095646 72.419043 0.000000 0.000000 0.000074 0.998580 -7.780453 1130 0 6.4200E-01 7.696915 1.144222 -19.709199 -2.280032 -4.110571 72.419043 0.998580 0.000610 0.001420 0.015451 3 1.1687E+03 0.378275 6.459651 -19.216821 -99.000000 -9.020061 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7890961167027957 rel_E_err 1.6251890341678177D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9452784121092207E-002 1050 7.716133 6.543E+04 -99.000000 -13.358150 72.415010 0.000000 0.000000 0.000074 0.998580 -7.714690 1139 0 8.1477E-01 7.716133 1.121159 -18.795630 -2.128973 -4.110035 72.415010 0.998580 0.000610 0.001420 0.015452 3 1.2207E+03 0.435967 6.460020 -13.358152 -99.000000 -8.971831 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5765032591224184 rel_E_err 2.6515311947660866D-12 save photos/x050 for model 1050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9428574187183086E-002 1060 7.734779 6.712E+04 -99.000000 -12.195251 72.410922 0.000000 0.000000 0.000074 0.998580 -7.650911 1151 0 7.1484E-01 7.734779 1.099192 -17.932424 -1.982714 -4.109413 72.410922 0.998580 0.000610 0.001420 0.015452 3 1.2734E+03 0.491940 6.460436 -12.195252 -99.000000 -8.983122 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7480690417844027 rel_E_err 1.7862035913074847D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9403939364502181E-002 1070 7.753058 6.880E+04 -99.000000 -11.527105 72.406741 0.000000 0.000000 0.000074 0.998580 -7.588410 1152 0 7.0343E-01 7.753058 1.077890 -17.107432 -1.839554 -4.108709 72.406741 0.998580 0.000610 0.001420 0.015453 3 1.3271E+03 0.546815 6.460909 -11.527106 -99.000000 -8.945478 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7854372126904892 rel_E_err 1.6389389906855472D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9378663010244054E-002 1080 7.771253 7.051E+04 -99.000000 -11.045046 72.402399 0.000000 0.000000 0.000074 0.998580 -7.526222 1152 0 7.1377E-01 7.771253 1.056928 -16.306249 -1.697165 -4.107915 72.402399 0.998580 0.000610 0.001420 0.015453 3 1.3828E+03 0.601441 6.461443 -11.045049 -99.000000 -8.909732 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6877633092522206 rel_E_err 2.0522803680972808D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9352365084196584E-002 1090 7.790473 7.233E+04 -45.016711 -10.622285 72.397610 0.000000 0.000000 0.000074 0.998580 -7.460565 1157 0 8.8637E-01 7.790473 1.035016 -15.480368 -1.546746 -4.107020 72.397610 0.998580 0.000610 0.001420 0.015454 3 1.4441E+03 0.659142 6.462061 -10.622291 -99.000000 -8.873474 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6251551414300796 rel_E_err 2.3705267397902968D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9323317689253509E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1100 7.809119 7.413E+04 -31.476062 -10.166303 72.392756 0.000000 0.000000 0.000074 0.998580 -7.396894 1162 0 7.8616E-01 7.809119 1.013993 -14.696448 -1.400684 -4.106018 72.392756 0.998580 0.000610 0.001420 0.015454 3 1.5062E+03 0.715125 6.462721 -10.166316 -99.000000 -8.839596 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7686507746778890 rel_E_err 1.7035278002966812D-12 save LOGS/profile12.data for model 1100 save photos/x100 for model 1100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9293842616109586E-002 1110 7.827399 7.593E+04 -30.874306 -9.677316 72.387789 0.000000 0.000000 0.000074 0.998580 -7.334505 1167 0 7.7448E-01 7.827399 0.993561 -13.937779 -1.257345 -4.104987 72.387789 0.998580 0.000610 0.001420 0.015455 3 1.5695E+03 0.770011 6.463409 -9.677340 -99.000000 -8.850208 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7806300081665025 rel_E_err 1.6571811773391633D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9263667753994165E-002 1120 7.845594 7.774E+04 -28.554677 -9.176614 72.382632 0.000000 0.000000 0.000074 0.998580 -7.272433 1166 0 7.8458E-01 7.845594 0.973381 -13.175360 -1.114595 -4.103911 72.382632 0.998580 0.000610 0.001420 0.015455 3 1.6351E+03 0.824645 6.464128 -9.176658 -99.000000 -8.823601 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7646509045863876 rel_E_err 1.7192898346780018D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9232331660965420E-002 1130 7.864813 7.970E+04 -26.849400 -8.647172 72.376942 0.000000 0.000000 0.000074 0.998580 -7.206906 1169 0 9.5703E-01 7.864813 0.952177 -12.324518 -0.963919 -4.102771 72.376942 0.998580 0.000610 0.001420 0.015456 3 1.7073E+03 0.882355 6.464914 -8.647264 -99.000000 -8.797715 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7458394632402108 rel_E_err 1.7953971719420169D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9197778364658012E-002 1140 7.883459 8.163E+04 -28.524422 -8.138003 72.371174 0.000000 0.000000 0.000074 0.998580 -7.143370 1171 0 8.5663E-01 7.883459 0.931769 -11.413985 -0.818072 -4.101537 72.371174 0.998580 0.000610 0.001420 0.015457 3 1.7802E+03 0.938345 6.465723 -8.138234 -99.000000 -8.774489 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7692896092863020 rel_E_err 1.7010238023317686D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9162773255418591E-002 1150 7.901738 8.356E+04 -28.142908 -7.644408 72.365271 0.000000 0.000000 0.000074 0.998580 -7.081121 1178 0 8.4479E-01 7.901738 0.911969 -10.442868 -0.675610 -4.100288 72.365271 0.998580 0.000610 0.001420 0.015457 3 1.8547E+03 0.993236 6.466554 -7.645099 -99.000000 -8.781137 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7660042761713903 rel_E_err 1.7139404315419365D-12 save photos/x150 for model 1150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9126989028248748E-002 1160 7.919933 8.550E+04 -24.358660 -7.158120 72.359140 0.000000 0.000000 0.000074 0.998580 -7.019196 1178 0 8.5474E-01 7.919933 0.892380 -9.439524 -0.534400 -4.098996 72.359140 0.998580 0.000610 0.001420 0.015458 3 1.9318E+03 1.047877 6.467417 -7.160397 -99.000000 -8.763474 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7570686998945035 rel_E_err 1.7495699069011341D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9089873591091933E-002 1170 7.939152 8.760E+04 -24.205714 -6.647142 72.352376 0.000000 0.000000 0.000074 0.998580 -6.953830 1180 0 1.0271E+00 7.939152 0.871815 -8.387050 -0.385820 -4.097640 72.352376 0.998580 0.000610 0.001420 0.015459 3 2.0166E+03 1.105594 6.468353 -6.655120 -99.000000 -8.746960 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7717092592263892 rel_E_err 1.6915729852921347D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9048991075713771E-002 1180 7.957798 8.968E+04 -23.039859 -6.145901 72.345518 0.000000 0.000000 0.000074 0.998580 -6.890457 1183 0 9.2646E-01 7.957798 0.851940 -7.392074 -0.241988 -4.096197 72.345518 0.998580 0.000610 0.001420 0.015459 3 2.1023E+03 1.161591 6.469295 -6.171266 -99.000000 -8.733580 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7728421349931232 rel_E_err 1.6871661948212617D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.9007613428037481E-002 1190 7.976076 9.175E+04 -20.808585 -5.630627 72.338499 0.000000 0.000000 0.000074 0.998580 -6.828375 1185 0 9.1445E-01 7.976076 0.832587 -6.448538 -0.100924 -4.094770 72.338499 0.998580 0.000610 0.001420 0.015460 3 2.1898E+03 1.216488 6.470243 -5.702275 -99.000000 -8.722581 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7610102522520954 rel_E_err 1.7337630688761463D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8965348245331409E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1200 7.994271 9.385E+04 -21.046711 -5.063409 72.331210 0.000000 0.000000 0.000074 0.998580 -6.766624 1188 0 9.2425E-01 7.994271 0.813385 -5.542568 0.039930 -4.093331 72.331210 0.998580 0.000610 0.001420 0.015461 3 2.2803E+03 1.271135 6.471202 -5.238484 -99.000000 -8.731379 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7459592690774848 rel_E_err 1.7949019563586618D-12 save LOGS/profile13.data for model 1200 save photos/x200 for model 1200 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8921540793030205E-002 1210 8.013489 9.611E+04 -20.356878 -4.377729 72.323167 0.000000 0.000000 0.000074 0.998580 -6.701448 1188 0 1.0964E+00 8.013489 0.793187 -4.621515 0.189086 -4.091849 72.323167 0.998580 0.000610 0.001420 0.015462 3 2.3798E+03 1.328859 6.472223 -4.744711 -99.000000 -8.723595 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5946421751654594 rel_E_err 2.5430671318965424D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8873313870894076E-002 1220 8.032133 9.835E+04 -19.113796 -3.638478 72.315014 0.000000 0.000000 0.000074 0.998580 -6.638266 1193 0 9.9566E-01 8.032133 0.773707 -3.762309 0.333297 -4.090298 72.315014 0.998580 0.000610 0.001420 0.015462 3 2.4803E+03 1.384862 6.473234 -4.243880 -99.000000 -8.717026 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6857116749041943 rel_E_err 2.0619984054001357D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8824527970685055E-002 1230 8.050409 1.006E+05 -18.786007 -2.880383 72.306671 0.000000 0.000000 0.000074 0.998580 -6.576378 1196 0 9.8347E-01 8.050409 0.754629 -2.951727 0.474328 -4.088779 72.306671 0.998580 0.000610 0.001420 0.015463 3 2.5828E+03 1.439766 6.474242 -3.699996 -99.000000 -8.711771 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7387900303467365 rel_E_err 1.8247777198334692D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8774716340715641E-002 1240 8.068601 1.029E+05 -18.331104 -2.123601 72.298008 0.000000 0.000000 0.000074 0.998580 -6.514825 1196 0 9.9308E-01 8.068601 0.735782 -2.174887 0.614655 -4.087248 72.298008 0.998580 0.000610 0.001420 0.015464 3 2.6889E+03 1.494420 6.475263 -3.076775 -99.000000 -8.708613 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7802326813331195 rel_E_err 1.6586979910829179D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8723106825277871E-002 1250 8.088193 1.054E+05 -18.166482 -1.322483 72.288243 0.000000 0.000000 0.000074 0.998580 -6.448380 1205 0 1.0496E+00 8.088193 0.715551 -1.368592 0.766201 -4.085591 72.288243 0.998580 0.000610 0.001420 0.015466 3 2.8080E+03 1.553377 6.476379 -2.319331 -99.000000 -8.719752 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7537966806606970 rel_E_err 1.7628011263777923D-12 save photos/x250 for model 1250 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8664993171631062E-002 1260 8.106509 1.077E+05 -17.617171 -0.597078 72.278721 0.000000 0.000000 0.000074 0.998580 -6.386780 1207 0 1.0448E+00 8.106509 0.696832 -0.645546 0.907803 -4.083965 72.278721 0.998580 0.000610 0.001420 0.015466 3 2.9238E+03 1.608299 6.477461 -1.573412 -99.000000 -8.723527 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7670627076084156 rel_E_err 1.7097684244801448D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8608541555192330E-002 1270 8.124726 1.101E+05 -17.561347 0.101518 72.268840 0.000000 0.000000 0.000074 0.998580 -6.325302 1211 0 1.0470E+00 8.124726 0.678373 0.047207 1.048784 -4.082293 72.268840 0.998580 0.000610 0.001420 0.015467 3 3.0434E+03 1.663042 6.478577 -0.828248 -99.000000 -8.731080 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7776888798321977 rel_E_err 1.6684420241292808D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8550104802037921E-002 1280 8.143228 1.126E+05 -16.781168 0.787240 72.258368 0.000000 0.000000 0.000074 0.998580 -6.262918 1210 0 1.1388E+00 8.143228 0.659764 0.724865 1.191989 -4.080558 72.258368 0.998580 0.000610 0.001420 0.015468 3 3.1697E+03 1.718650 6.479756 -0.086346 -99.000000 -8.743515 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.7574215210435185 rel_E_err 1.7481491322495101D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8488335633912439E-002 1290 8.162430 1.151E+05 -15.911821 1.473935 72.247013 0.000000 0.000000 0.000074 0.998580 -6.198238 1212 0 1.1544E+00 8.162430 0.640649 1.401643 1.340456 -4.078651 72.247013 0.998580 0.000610 0.001420 0.015470 3 3.3060E+03 1.776367 6.481033 0.659598 -99.000000 -8.762404 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5972542089222834 rel_E_err 2.5278179362473873D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8421557413666114E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1300 8.180817 1.177E+05 -15.445400 2.108325 72.235656 0.000000 0.000000 0.000074 0.998580 -6.136367 1214 0 1.1122E+00 8.180817 0.622568 2.025415 1.482337 -4.076705 72.235656 0.998580 0.000610 0.001420 0.015471 3 3.4418E+03 1.831641 6.482321 1.348351 -99.000000 -8.786745 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7457705848937195 rel_E_err 1.7956819413798406D-12 save LOGS/profile14.data for model 1300 save photos/x300 for model 1300 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8354963980077355E-002 1310 8.199029 1.202E+05 -15.655555 2.715110 72.223920 0.000000 0.000000 0.000074 0.998580 -6.075148 1217 0 1.1141E+00 8.199029 0.604767 2.620816 1.622523 -4.074706 72.223920 0.998580 0.000610 0.001420 0.015472 3 3.5815E+03 1.886395 6.483655 2.005512 -99.000000 -8.816845 0.000000 0.000252 0.000133 0.001420 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7617495912547074 rel_E_err 1.7308140372050242D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8286353731602944E-002 1320 8.217525 1.229E+05 -13.433438 3.310148 72.211478 0.000000 0.000000 0.000074 0.998580 -6.013039 1208 0 1.2058E+00 8.217525 0.586405 3.203601 1.764535 -4.072639 72.211478 0.998580 0.000610 0.001420 0.015474 3 3.7289E+03 1.942011 6.485061 2.647720 -99.000000 -8.835915 0.000000 0.000252 0.000133 0.001420 0.000E+00 max increase log_rel_run_E_err -11.6692389909202419 rel_E_err 2.1417116994030167D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8213872712195629E-002 1330 8.236714 1.256E+05 -12.809313 3.905492 72.197979 0.000000 0.000000 0.000074 0.998580 -5.948682 1207 0 1.2215E+00 8.236714 0.567650 3.785823 1.911521 -4.070380 72.197979 0.998579 0.000610 0.001420 0.015476 3 3.8880E+03 1.999715 6.486569 3.287229 -99.000000 -8.879344 0.000000 0.000253 0.000133 0.001421 0.000E+00 lgRho_cntr log_rel_run_E_err -11.7305379405859735 rel_E_err 1.8597820829074827D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8135586006646874E-002 retry: check_lgL_nuc_change hard limit 1332 1340 8.248310 1.274E+05 -14.409080 4.254494 72.189504 0.000000 0.000000 0.000073 0.998580 -5.909822 1205 1 9.6661E-01 8.248310 0.556379 4.127026 2.000202 -4.068847 72.189504 0.998577 0.000610 0.001420 0.015477 3 3.9875E+03 2.034593 6.487524 3.659935 -99.000000 -8.910245 0.000000 0.000255 0.000133 0.001423 0.000E+00 Lnuc log_rel_run_E_err -11.7668012029779003 rel_E_err 1.7107982487517866D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8086687452215888E-002 1350 8.258303 1.289E+05 -13.872945 4.548479 72.181982 0.000000 0.000000 0.000072 0.998580 -5.876361 1208 1 9.3065E-01 8.258303 0.546542 4.414808 2.076552 -4.067579 72.181982 0.998573 0.000610 0.001420 0.015478 3 4.0755E+03 2.064649 6.488363 3.971612 -99.000000 -8.940124 0.000000 0.000258 0.000134 0.001427 0.000E+00 Lnuc log_rel_run_E_err -11.7649583453889353 rel_E_err 1.7180731652989693D-12 save photos/x350 for model 1350 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8043566160429425E-002 1360 8.267532 1.303E+05 -12.769749 4.813960 72.174821 0.000000 0.000000 0.000071 0.998580 -5.845474 1208 1 9.1719E-01 8.267532 0.537519 4.675615 2.147027 -4.066399 72.174821 0.998567 0.000610 0.001420 0.015479 3 4.1590E+03 2.092414 6.489144 4.249804 -99.000000 -8.968600 0.000000 0.000263 0.000136 0.001433 0.000E+00 Lnuc log_rel_run_E_err -11.7705035113134038 rel_E_err 1.6962758876480162D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.8002905028814854E-002 1370 8.278063 1.319E+05 -12.557894 5.108371 72.166330 0.000000 0.000000 0.000068 0.998580 -5.810260 1209 1 1.0343E+00 8.278063 0.527141 4.967444 2.227394 -4.065084 72.166330 0.998554 0.000610 0.001420 0.015480 3 4.2578E+03 2.124093 6.490040 4.551023 -99.000000 -8.999893 0.000000 0.000275 0.000140 0.001446 0.000E+00 Lnuc log_rel_run_E_err -11.7762759477958312 rel_E_err 1.6738789666129750D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7955507670999107E-002 1380 8.288559 1.336E+05 -12.204807 5.389770 72.157385 0.000000 0.000000 0.000062 0.998580 -5.775198 1209 1 1.0064E+00 8.288559 0.516684 5.252305 2.307442 -4.063714 72.157385 0.998527 0.000610 0.001420 0.015482 3 4.3615E+03 2.155665 6.490944 4.823256 -99.000000 -9.027259 0.000000 0.000300 0.000149 0.001473 0.000E+00 Lnuc log_rel_run_E_err -11.7662254855053376 rel_E_err 1.7130676525970912D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7907158055351883E-002 1390 8.300130 1.355E+05 -11.399274 5.679098 72.146605 0.000000 0.000000 0.000050 0.998580 -5.736587 1209 1 1.1236E+00 8.300130 0.504962 5.559595 2.395646 -4.062223 72.146605 0.998462 0.000610 0.001420 0.015485 3 4.4861E+03 2.190469 6.491954 5.060311 -99.000000 -9.050444 0.000000 0.000359 0.000167 0.001538 0.000E+00 Lnuc log_rel_run_E_err -11.8163757895288644 rel_E_err 1.5262448463216376D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7852460693148165E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1400 8.312669 1.376E+05 -10.259403 5.957492 72.132870 0.000000 0.000000 0.000027 0.998580 -5.694806 1211 1 1.2452E+00 8.312669 0.491935 5.884713 2.491173 -4.060582 72.132870 0.998297 0.000610 0.001420 0.015491 3 4.6443E+03 2.228179 6.493055 5.145835 -99.000000 -9.066008 0.000000 0.000514 0.000200 0.001703 0.000E+00 Lnuc log_rel_run_E_err -12.6699155077424752 rel_E_err 2.1383780718000528D-13 save LOGS/profile15.data for model 1400 save photos/x400 for model 1400 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7791231199922841E-002 1410 8.325707 1.399E+05 -9.102763 6.227508 72.112955 0.000000 0.000000 0.000004 0.998580 -5.651453 1211 1 1.4527E+00 8.325707 0.477933 6.214022 2.590430 -4.058937 72.112955 0.997813 0.000611 0.001420 0.015506 3 4.8727E+03 2.267373 6.494139 4.712886 -99.000000 -9.070610 0.000000 0.000988 0.000232 0.002187 0.000E+00 max increase log_rel_run_E_err -10.8387032407841168 rel_E_err -1.4497621569938620D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7724210159679351E-002 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/gs98_co_z0.004_x0.03.bin 1420 8.335658 1.421E+05 -8.499124 6.458323 72.067942 0.000000 0.000000 0.000000 0.998580 -5.618505 1212 1 1.9645E+00 8.335658 0.464533 6.457462 2.666111 -4.058548 72.067942 0.995728 0.000613 0.001420 0.015562 3 5.3877E+03 2.297242 6.494104 3.754991 -99.000000 -9.054328 0.000000 0.003069 0.000238 0.004272 0.000E+00 max increase log_rel_run_E_err -11.7416459038329890 rel_E_err 1.8128175466411036D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7662655734457995E-002 num_steps_to_relax_rotation 100 1430 8.337094 1.430E+05 -7.937791 6.489648 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613788 1209 1 0.0000E+00 8.337094 0.458905 6.488664 2.676929 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2156E+03 2.301535 6.494280 3.844447 -99.000000 -9.049760 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8564167545621677 rel_E_err 5.1581511467880791D-12 relax to omega: wanted-current, current, wanted 1430 1.8129105180946230D-05 9.5414770911322676D-07 1.9083252890059456D-05 1440 8.337102 1.430E+05 -7.937706 6.489855 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613763 1209 1 0.0000E+00 8.337102 0.458863 6.488871 2.676995 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2256E+03 2.301560 6.494271 3.844624 -99.000000 -9.049574 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8563427584538958 rel_E_err 1.2825502414066876D-13 relax to omega: wanted-current, current, wanted 1440 1.6226514462092478D-05 2.8634233436267439D-06 1.9089937805719223D-05 1450 8.337109 1.430E+05 -7.937634 6.490032 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613740 1209 1 0.0000E+00 8.337109 0.458820 6.489048 2.677052 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2356E+03 2.301581 6.494258 3.844776 -99.000000 -9.049352 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8562274993468151 rel_E_err -7.7077811629231659D-12 relax to omega: wanted-current, current, wanted 1450 1.4323585813220668D-05 4.7743375762524498D-06 1.9097923389473117D-05 1460 8.337115 1.431E+05 -7.937572 6.490182 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613722 1209 1 0.0000E+00 8.337115 0.458777 6.489198 2.677100 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2456E+03 2.301599 6.494243 3.844904 -99.000000 -9.049109 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8558368507495207 rel_E_err -1.7130352360272648D-11 relax to omega: wanted-current, current, wanted 1460 1.2419800453876278D-05 6.6872141936250267D-06 1.9107014647501306D-05 1470 8.337121 1.431E+05 -7.937521 6.490306 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613706 1209 1 0.0000E+00 8.337121 0.458736 6.489322 2.677140 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2556E+03 2.301613 6.494227 3.845011 -99.000000 -9.048852 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8551449686764068 rel_E_err -2.6857299943599847D-11 relax to omega: wanted-current, current, wanted 1470 1.0514778344655126D-05 8.6023468766228149D-06 1.9117125221277941D-05 1480 8.337125 1.431E+05 -7.937480 6.490405 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613694 1209 1 0.0000E+00 8.337125 0.458696 6.489422 2.677172 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2656E+03 2.301625 6.494208 3.845096 -99.000000 -9.048583 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8541621687000021 rel_E_err -3.5824720941472607D-11 relax to omega: wanted-current, current, wanted 1480 8.6081912967288115D-06 1.0520015104299633D-05 1.9128206401028444D-05 1490 8.337128 1.431E+05 -7.937449 6.490481 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613684 1209 1 0.0000E+00 8.337128 0.458658 6.489497 2.677196 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2756E+03 2.301634 6.494188 3.845160 -99.000000 -9.048307 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8529322264478383 rel_E_err -4.2995451523794485D-11 relax to omega: wanted-current, current, wanted 1490 6.6997371517079656D-06 1.2440490572237854D-05 1.9140227723945820D-05 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1500 8.337130 1.431E+05 -7.937427 6.490534 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613677 1209 1 0.0000E+00 8.337130 0.458622 6.489550 2.677213 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2856E+03 2.301640 6.494167 3.845205 -99.000000 -9.048023 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8515282912560709 rel_E_err -4.7410822686853115D-11 relax to omega: wanted-current, current, wanted 1500 4.7891287437073549D-06 1.4364040467308827D-05 1.9153169211016182D-05 1510 8.337131 1.431E+05 -7.937414 6.490565 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613673 1209 1 0.0000E+00 8.337131 0.458587 6.489581 2.677223 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.2956E+03 2.301644 6.494145 3.845232 -99.000000 -9.047735 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8500502411249240 rel_E_err -4.8315968825255770D-11 relax to omega: wanted-current, current, wanted 1510 2.8760879406796823D-06 1.6290929570387219D-05 1.9167017511066901D-05 1520 8.337131 1.431E+05 -7.937409 6.490575 72.016220 0.000000 0.000000 0.000000 0.998580 -5.613672 1209 1 0.0000E+00 8.337131 0.458554 6.489591 2.677227 -99.000000 72.016220 0.992839 0.000619 0.001420 0.015641 2 6.3056E+03 2.301645 6.494122 3.845241 -99.000000 -9.047442 0.000000 0.005952 0.000238 0.007161 0.000E+00 max_dt log_rel_run_E_err -6.8486221625141779 rel_E_err -4.4800207078467929D-11 relax to omega: wanted-current, current, wanted 1520 9.6034227406131478D-07 1.8221421571642135D-05 1.9181763845703450D-05 final step: wanted-current, current, wanted 1525 1.3706681674164917D-09 1.9188101271245191D-05 1.9189471939412607D-05 finished doing relax uniform omega 1430 8.337366 1.437E+05 -9.435877 6.482805 71.811748 0.000000 0.000000 0.000000 0.998580 -5.611870 1203 1 2.7563E+00 8.337366 0.451633 6.480389 2.677843 -4.049390 71.811748 0.981745 0.000679 0.001420 0.015951 4 8.2582E+03 2.302795 6.487999 4.226848 -99.000000 -8.980875 0.000000 0.016986 0.000238 0.018255 0.000E+00 max increase log_rel_run_E_err -11.7868424603413970 rel_E_err 1.6336444424457214D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7580118093853466E-002 1440 8.341190 1.432E+05 -10.314721 6.475415 70.343316 0.000000 0.000000 0.000000 0.998580 -5.590419 1209 1 3.3951E+00 8.341190 0.451286 6.460611 2.697497 -4.063501 70.343316 0.901631 0.002981 0.001420 0.018367 5 2.4983E+04 2.318089 6.480436 5.000630 -99.000000 -9.004155 0.000000 0.094798 0.000238 0.098369 0.000E+00 XHe_cntr log_rel_run_E_err -11.7708450355332310 rel_E_err 1.6949424800227116D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.7116094459685469E-002 1450 8.347080 1.424E+05 -10.132783 6.465811 68.366681 0.000000 0.000000 0.000000 0.998580 -5.559165 1228 1 3.3703E+00 8.347080 0.450601 6.429747 2.729412 -4.084524 68.366681 0.791306 0.012037 0.001420 0.022259 5 4.8499E+04 2.340877 6.470484 5.367199 -99.000000 -9.041584 0.000000 0.196068 0.000238 0.208694 0.000E+00 XHe_cntr log_rel_run_E_err -11.6991496565957824 rel_E_err 1.9991728418643082D-12 save photos/x450 for model 1450 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.6424580752520152E-002 1460 8.353791 1.419E+05 -10.216348 6.456255 66.419378 0.000000 0.000000 0.000000 0.998580 -5.525329 1231 1 3.3641E+00 8.353791 0.448831 6.392335 2.767498 -4.098889 66.419378 0.681678 0.029707 0.001420 0.026974 5 7.2601E+04 2.366077 6.460713 5.592539 -99.000000 -9.082297 0.000000 0.288026 0.000238 0.318322 0.000E+00 XHe_cntr log_rel_run_E_err -11.6968946449415494 rel_E_err 2.0095802555207930D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.5686126381488898E-002 1470 8.361599 1.421E+05 -9.941382 6.446491 64.473562 0.000000 0.000000 0.000000 0.945919 -5.487681 1240 1 3.3679E+00 8.361599 0.442868 6.344702 2.813563 -4.116490 64.473562 0.572276 0.059116 0.054081 0.032851 5 9.7584E+04 2.394657 6.450883 5.766508 -99.000000 -8.973255 0.000000 0.368019 0.000238 0.427724 0.000E+00 XHe_cntr log_rel_run_E_err -11.6811268530428212 rel_E_err 2.0838821132228442D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.4902794760575767E-002 1480 8.371404 1.422E+05 -9.720020 6.435810 62.405115 0.000000 0.000000 0.000000 0.824067 -5.442207 1257 1 3.5446E+00 8.371404 0.437191 6.277296 2.873407 -4.132564 62.405115 0.457887 0.107954 0.175933 0.040830 5 1.2520E+05 2.429781 6.440624 5.921243 -99.000000 -8.873023 0.000000 0.433567 0.000240 0.542113 0.000E+00 XHe_cntr log_rel_run_E_err -11.6573655450435965 rel_E_err 2.2010730431235177D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.4043172957164792E-002 1490 8.382194 1.423E+05 -10.553369 6.425475 60.478386 0.000000 0.000000 0.000000 0.704772 -5.393845 1265 1 3.3436E+00 8.382194 0.431244 6.191796 2.941202 -4.147341 60.478386 0.356294 0.174228 0.295228 0.050349 5 1.5175E+05 2.467718 6.430514 6.044698 -99.000000 -8.771153 0.000000 0.468881 0.000245 0.643706 0.000E+00 adjust_J_q log_rel_run_E_err -11.6607850864835765 rel_E_err 2.1838103175760467D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.3248527713851856E-002 write /mnt/home/bbarker/ceph/mesa_testing/work/data/eosDT_data/cache/mesa-FreeEOS_50z00x.bin __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Z_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1500 8.393488 1.423E+05 -10.474790 6.416137 58.792156 0.000000 0.000000 0.000000 0.601723 -5.344907 1253 1 3.4100E+00 8.393488 0.426884 6.089252 3.014069 -4.163320 58.792156 0.272254 0.253643 0.398277 0.061003 5 1.7586E+05 2.506717 6.421336 6.139509 -99.000000 -8.706673 0.000000 0.473491 0.000259 0.727746 0.000E+00 max increase log_rel_run_E_err -11.6698587929258579 rel_E_err 2.1386573423053702D-12 save LOGS/profile16.data for model 1500 save photos/x500 for model 1500 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.2559400074219900E-002 1510 8.407979 1.430E+05 -11.124756 6.405969 57.027575 0.000000 0.000000 0.000000 0.507537 -5.284290 1251 1 3.3442E+00 8.407979 0.417973 5.939231 3.109977 -4.178404 57.027575 0.191079 0.362957 0.492463 0.075297 5 2.0204E+05 2.555842 6.411515 6.224592 -99.000000 -8.667796 0.000000 0.445291 0.000321 0.808921 0.000E+00 adjust_J_q log_rel_run_E_err -11.6557204153356242 rel_E_err 2.2094266322997783D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.1856547338999311E-002 1520 8.423327 1.434E+05 -11.189747 6.397281 55.566798 0.000000 0.000000 0.000000 0.412582 -5.222541 1256 1 3.2820E+00 8.423327 0.411411 5.759715 3.214087 -4.191848 55.566798 0.130114 0.476186 0.587418 0.090415 5 2.2446E+05 2.606844 6.403375 6.283560 -99.000000 -8.611903 0.000000 0.392816 0.000529 0.869886 0.000E+00 XO_cntr log_rel_run_E_err -11.6744776429161981 rel_E_err 2.1160326138660404D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.1289571182134029E-002 1530 8.438900 1.445E+05 -11.538285 6.390114 54.428694 0.000000 0.000000 0.000000 0.354271 -5.162268 1252 1 3.2241E+00 8.438900 0.401494 5.554749 3.322032 -4.199333 54.428694 0.087154 0.578548 0.645729 0.104845 5 2.4234E+05 2.657602 6.397066 6.321524 -99.000000 -8.585146 48.978758 0.332801 0.001134 0.912846 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6522975186177113 rel_E_err 2.2269090559709791D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0851740545364059E-002 1540 8.455641 1.460E+05 -12.649417 6.384192 53.520558 0.000000 0.000000 0.000000 0.310133 -5.099815 1267 1 3.1063E+00 8.455641 0.390418 5.300186 3.440162 -4.208426 53.520558 0.055595 0.668235 0.689867 0.118570 5 2.5687E+05 2.711198 6.392496 6.346840 -99.000000 -8.565193 48.978830 0.272951 0.002813 0.944405 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6491639575873975 rel_E_err 2.2430349592357688D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0484851060521196E-002 1550 8.472748 1.473E+05 -10.266659 6.379334 52.849993 0.000000 0.000000 0.000000 0.276363 -5.038100 1283 1 2.9763E+00 8.472748 0.380889 4.974330 3.562612 -4.212630 52.849993 0.033650 0.735985 0.723637 0.130371 4 2.6776E+05 2.765106 6.389674 6.361897 -99.000000 -8.547420 48.978830 0.223043 0.006728 0.966350 0.000E+00 lgRho_cntr log_rel_run_E_err -11.6140971341124430 rel_E_err 2.4316600842261934D-12 save photos/x550 for model 1550 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 5.0178756381170891E-002 1560 8.490312 1.489E+05 -7.438166 6.374440 52.365373 0.000000 0.000000 0.000000 0.247541 -4.976540 1291 1 2.8282E+00 8.490312 0.371091 4.503351 3.689669 -4.215045 52.365373 0.018243 0.780010 0.752459 0.140136 3 2.7570E+05 2.819728 6.388307 6.368556 -99.000000 -8.622843 48.978830 0.186158 0.014327 0.981757 0.000E+00 lgRho_cntr log_rel_run_E_err -10.7371282419022442 rel_E_err 1.8317734419836106D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9908299420480529E-002 set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 change to "co_burn.net" number of species 9 new net = co_burn.net 1570 8.505850 1.507E+05 -9.156645 6.367190 52.082810 0.000000 0.000000 0.000000 0.230652 -4.923418 1304 1 2.0207E+00 8.505850 0.360774 3.892551 3.803012 -4.215336 52.082810 0.009204 0.798321 0.769348 0.146560 3 2.8033E+05 2.867520 6.388364 6.365732 -61.666382 -8.619763 48.978830 0.166497 0.023459 0.000000 0.000E+00 max increase log_rel_run_E_err -12.0794583956042612 rel_E_err -8.3280170261951704D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9696009999013732E-002 1580 8.520430 1.529E+05 -7.611868 6.351815 51.928559 0.000000 0.000000 0.000000 0.228220 -4.874606 1315 1 2.4344E+00 8.520430 0.348800 3.124821 3.910077 -4.214332 51.928559 0.004194 0.802922 0.771780 0.150377 3 2.8286E+05 2.911961 6.389401 6.351558 -58.600921 -8.616589 48.978830 0.157661 0.031304 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.0793756838736641 rel_E_err 8.3296032547271003D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9519493368549349E-002 1590 8.541767 1.562E+05 -10.850157 6.275375 51.827638 0.000000 0.000000 0.000000 0.226499 -4.804367 1311 1 1.9959E+00 8.541767 0.331324 1.640772 4.067429 -4.210427 51.827638 0.001016 0.801816 0.773501 0.152923 4 2.8451E+05 2.976558 6.391859 6.275365 -54.382394 -8.604182 48.978830 0.153656 0.038217 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.4169890516088870 rel_E_err -3.8283439429795017D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9290543955523153E-002 stop because have dropped below central lower limit for he4 0.8607584648E-03 0.1000000000E-02 1591 8.543921 1.565E+05 -10.951671 6.260367 51.822147 0.000000 0.000000 0.000000 0.226058 -4.797324 1311 1 1.9498E+00 8.543921 0.329615 1.460622 4.083330 -4.210126 51.822147 0.000861 0.801624 0.773942 0.153051 4 2.8460E+05 2.983064 6.392141 6.260360 -53.971623 -8.602426 48.978830 0.153516 0.038624 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5707441175387906 rel_E_err -2.6869270930108328D-12 save LOGS/profile17.data for model 1591 Lnuc retries 1 varcontrol dt limit 85 max increase dt limit 656 max decrease dt limit 1 Lnuc dt limit 77 lgRho_cntr dt limit 1141 XHe_cntr dt limit 37 XO_cntr dt limit 18 adjust_J_q dt limit 24 model saved to he_dep.mod save photos/x591 for model 1591 termination code: xa_central_lower_limit runtime (minutes), retries, steps 10.03 1 1591 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1591 8.543921 1.565E+05 -10.951671 6.260367 51.822147 0.000000 0.000000 0.000000 0.226058 -4.797324 1311 1 1.9498E+00 8.543921 0.329615 1.460622 4.083330 -4.210126 51.822147 0.000861 0.801624 0.773942 0.153051 4 2.8460E+05 2.983064 6.392141 6.260360 -53.971623 -8.602426 48.978830 0.153516 0.038624 0.000000 0.000E+00 lgRho_cntr log_rel_run_E_err -11.5707441175387906 rel_E_err -2.6869270930108328D-12 DATE: 2026-11-20 TIME: 08:36:03 finished inlist_to_he_dep_header run inlist_pulses_header DATE: 2026-11-20 TIME: 08:36:04 reading user weak rate file /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number 703aa83e7 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile18.data for model 1592 1600 8.572427 1.604E+05 -15.117647 5.727899 51.822147 0.000000 0.000000 0.000000 0.226058 -4.704961 1308 0 1.4897E+00 8.572427 0.312638 -2.002883 4.293959 -99.000000 51.822147 0.000042 0.800150 0.773942 0.153744 4 2.8523E+05 3.068892 6.400854 5.727899 -48.752470 -7.927796 48.978830 0.152952 0.041033 0.000000 -0.411E-07 lg_XHe_cntr log_rel_run_E_err -11.6148261766084140 rel_E_err 2.4275815235421912D-12 save LOGS/profile19.data for model 1600 save photos/x600 for model 1600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8964583639478393E-002 1610 8.584854 1.623E+05 -15.383999 4.730853 51.822147 0.000000 0.000000 0.000000 0.226058 -4.664727 1299 0 9.3638E-01 8.584854 0.303199 -5.815682 4.385589 -99.000000 51.822147 0.000002 0.800044 0.773942 0.153798 3 2.8538E+05 3.106352 6.402848 4.730853 -46.589959 -7.896347 48.978830 0.152937 0.041172 0.000000 -0.479E-07 lg_XHe_cntr log_rel_run_E_err -11.6354812618891348 rel_E_err 2.3148280596514309D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8833907239751055E-002 1620 8.596169 1.641E+05 -19.409561 2.687859 51.822147 0.000000 0.000000 0.000000 0.226058 -4.628117 1304 0 1.3908E+00 8.596169 0.294863 -6.849943 4.468953 -99.000000 51.822147 0.000000 0.800039 0.773942 0.153821 4 2.8551E+05 3.140482 6.404702 2.687859 -44.674237 -7.867817 48.978830 0.152937 0.041179 0.000000 -0.466E-07 lgRho_cntr log_rel_run_E_err -11.6235557162657877 rel_E_err 2.3792730410038752D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8712933669421345E-002 retry: logT < hydro_mtx_min_allowed_logT 64 1626 retry: logT < hydro_mtx_min_allowed_logT 6 1626 retry: logT < hydro_mtx_min_allowed_logT 8 1626 retry: logT < hydro_mtx_min_allowed_logT 14 1626 retry: logT < hydro_mtx_min_allowed_logT 4 1626 retry: logT < hydro_mtx_min_allowed_logT 14 1626 retry: logT < hydro_mtx_min_allowed_logT 12 1626 retry: logT < hydro_mtx_min_allowed_logT 8 1626 retry: logT < hydro_mtx_min_allowed_logT 6 1626 retry: logT < hydro_mtx_min_allowed_logT 12 1626 retry: logT < hydro_mtx_min_allowed_logT 2 1626 retry: logT < hydro_mtx_min_allowed_logT 8 1626 retry: logT < hydro_mtx_min_allowed_logT 8 1626 retry: logT < hydro_mtx_min_allowed_logT 6 1626 retry: logT < hydro_mtx_min_allowed_logT 6 1626 retry: logT < hydro_mtx_min_allowed_logT 6 1626 retry: logT < hydro_mtx_min_allowed_logT 2 1626 retry: eos evaluated at too low a density 1626 write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin e00(i,j,k) equ_w_div_wc lnd 6 1 1 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 1 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 1 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 1 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 1 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 1 NaN e00(i,j,k) equ_w_div_wc L 6 4 1 NaN ep1(i,j,k) equ_w_div_wc L 6 4 1 NaN e00(i,j,k) equ_w_div_wc v 6 5 1 NaN ep1(i,j,k) equ_w_div_wc v 6 5 1 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 1 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 1 NaN em1(i,j,k) equ_w_div_wc lnd 6 1 3 NaN e00(i,j,k) equ_w_div_wc lnd 6 1 3 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 3 NaN em1(i,j,k) equ_w_div_wc lnT 6 2 3 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 3 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 3 NaN em1(i,j,k) equ_w_div_wc lnR 6 3 3 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 3 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 3 NaN em1(i,j,k) equ_w_div_wc L 6 4 3 NaN e00(i,j,k) equ_w_div_wc L 6 4 3 NaN ep1(i,j,k) equ_w_div_wc L 6 4 3 NaN em1(i,j,k) equ_w_div_wc v 6 5 3 NaN e00(i,j,k) equ_w_div_wc v 6 5 3 NaN ep1(i,j,k) equ_w_div_wc v 6 5 3 NaN em1(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 3 NaN em1(i,j,k) equ_w_div_wc lnd 6 1 2 NaN e00(i,j,k) equ_w_div_wc lnd 6 1 2 NaN ep1(i,j,k) equ_w_div_wc lnd 6 1 2 NaN em1(i,j,k) equ_w_div_wc lnT 6 2 2 NaN e00(i,j,k) equ_w_div_wc lnT 6 2 2 NaN ep1(i,j,k) equ_w_div_wc lnT 6 2 2 NaN em1(i,j,k) equ_w_div_wc lnR 6 3 2 NaN e00(i,j,k) equ_w_div_wc lnR 6 3 2 NaN ep1(i,j,k) equ_w_div_wc lnR 6 3 2 NaN em1(i,j,k) equ_w_div_wc L 6 4 2 NaN e00(i,j,k) equ_w_div_wc L 6 4 2 NaN ep1(i,j,k) equ_w_div_wc L 6 4 2 NaN em1(i,j,k) equ_w_div_wc v 6 5 2 NaN e00(i,j,k) equ_w_div_wc v 6 5 2 NaN ep1(i,j,k) equ_w_div_wc v 6 5 2 NaN em1(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN e00(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN ep1(i,j,k) equ_w_div_wc w_div_wc 6 6 2 NaN retry: error in do1_w_div_wc_eqn 1626 retry: logRho < hydro_mtx_min_allowed_logRho 1 1626 1630 8.604857 1.652E+05 -22.409891 0.354047 51.822147 0.000000 0.000000 0.000000 0.226058 -4.600046 1349 20 -4.4222E+00 8.604857 0.289889 -6.510942 4.532953 -99.000000 51.822147 0.000000 0.800038 0.773942 0.153839 5 2.8561E+05 3.166691 6.406170 0.354047 -43.236221 -8.201215 48.978830 0.152937 0.041179 0.000000 0.133E-04 max increase log_rel_run_E_err -10.4324373166237709 rel_E_err 3.6945596549644033D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8618284145442704E-002 1640 8.604858 1.652E+05 -22.410785 0.353989 51.822147 0.000000 0.000000 0.000000 0.226058 -4.600045 1348 20 -3.6304E+00 8.604858 0.289889 -6.510985 4.532954 -99.000000 51.822147 0.000000 0.800038 0.773942 0.153839 2 2.8561E+05 3.166692 6.406170 0.353989 -43.236204 -8.201212 48.978830 0.152937 0.041179 0.000000 -0.259E-07 max increase log_rel_run_E_err -11.6115679506389533 rel_E_err 2.4458625612499759D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8618283038370062E-002 1650 8.604858 1.652E+05 -22.413165 0.353542 51.822147 0.000000 0.000000 0.000000 0.226058 -4.600043 1346 20 -2.8386E+00 8.604858 0.289005 -6.510963 4.532959 -4.188574 51.822147 0.000000 0.800038 0.773942 0.153839 3 2.8561E+05 3.166694 6.405134 0.353542 -43.236101 -8.194051 48.978830 0.152937 0.041179 0.000000 -0.418E-04 max increase log_rel_run_E_err -11.4169015495106301 rel_E_err 3.8291153593593058D-12 save photos/x650 for model 1650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8618276313141501E-002 1660 8.604862 1.653E+05 -22.421700 0.350468 51.822144 0.000000 0.000000 0.000000 0.226058 -4.600031 1346 20 -2.0467E+00 8.604862 0.288010 -6.510817 4.532987 -4.190321 51.822144 0.000000 0.800038 0.773942 0.153839 3 2.8561E+05 3.166705 6.404272 0.350468 -43.235471 -8.187233 48.978830 0.152937 0.041179 0.000000 -0.461E-05 max increase log_rel_run_E_err -11.5982677649506272 rel_E_err 2.5219253959479598D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8618235376525550E-002 1670 8.604886 1.654E+05 -22.447220 0.333410 51.822126 0.000000 0.000000 0.000000 0.226058 -4.599954 1346 20 -1.2549E+00 8.604886 0.287252 -6.509919 4.533162 -4.191526 51.822126 0.000000 0.800038 0.773942 0.153839 3 2.8561E+05 3.166777 6.403775 0.333410 -43.231581 -8.182686 48.978830 0.152937 0.041179 0.000000 -0.655E-06 max increase log_rel_run_E_err -11.6258730820839222 rel_E_err 2.3666112132448923D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8617982173268674E-002 1680 8.605033 1.656E+05 -22.567797 0.231273 51.822015 0.000000 0.000000 0.000000 0.226042 -4.599478 1346 20 -4.6312E-01 8.605033 0.286414 -6.504367 4.534243 -4.191801 51.822015 0.000000 0.800038 0.773958 0.153839 3 2.8561E+05 3.167221 6.403402 0.231273 -43.207515 -8.178353 48.978830 0.152937 0.041179 0.000000 -0.143E-06 max increase log_rel_run_E_err -11.6043615213199853 rel_E_err 2.4867863719018371D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8616415643697633E-002 1690 8.605941 1.658E+05 -23.216148 -0.274296 51.821326 0.000000 0.000000 0.000000 0.225996 -4.596538 1369 20 3.2869E-01 8.605941 0.284838 -6.470016 4.540926 -4.192123 51.821326 0.000000 0.800038 0.774004 0.153841 3 2.8562E+05 3.169964 6.403145 -0.274296 -43.058915 -8.171944 48.978830 0.152937 0.041179 0.000000 -0.549E-07 max increase log_rel_run_E_err -11.6033230014024120 rel_E_err 2.4927400912827480D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8606721313319418E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.611548 1.669E+05 -24.338077 -0.561987 51.817057 0.000000 0.000000 0.000000 0.225692 -4.578300 1470 20 1.1205E+00 8.611548 0.279443 -6.260325 4.582073 -4.191560 51.817057 0.000000 0.800038 0.774308 0.153860 5 2.8569E+05 3.186943 6.403532 -0.561988 -42.150160 -8.154753 48.978830 0.152937 0.041179 0.000000 -0.355E-07 max increase log_rel_run_E_err -11.5541971029219219 rel_E_err 2.7912767432431594D-12 save LOGS/profile20.data for model 1700 save photos/x700 for model 1700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8546707630017283E-002 1710 8.629057 1.698E+05 -24.874076 -0.225709 51.803388 0.000000 0.000000 0.000000 0.224437 -4.521779 1551 20 1.3054E+00 8.629057 0.265860 -5.618502 4.711160 -4.188254 51.803388 0.000000 0.800038 0.775563 0.153902 5 2.8590E+05 3.239826 6.405880 -0.225711 -39.378529 -8.115067 48.978830 0.152937 0.041179 0.000000 -0.287E-07 lgRho_cntr log_rel_run_E_err -11.5447041209162737 rel_E_err 2.8529612903262144D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8354372134563596E-002 1720 8.647527 1.726E+05 -23.088094 0.128332 51.788489 0.000000 0.000000 0.000000 0.223035 -4.462233 1584 20 1.3928E+00 8.647527 0.252989 -4.966777 4.848064 -4.184180 51.788489 0.000000 0.800038 0.776965 0.153952 5 2.8613E+05 3.295662 6.408687 0.128328 -36.570834 -8.077360 48.978830 0.152937 0.041179 0.000000 -0.253E-07 max increase log_rel_run_E_err -11.5153887536325605 rel_E_err 3.0521877598121861D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8144431970424298E-002 1730 8.666364 1.753E+05 -23.611805 0.484438 51.772788 0.000000 0.000000 0.000000 0.221545 -4.401472 1603 20 1.4795E+00 8.666364 0.240813 -4.327691 4.989632 -4.179151 51.772788 0.000000 0.800038 0.778455 0.154016 5 2.8637E+05 3.352713 6.411683 0.484432 -33.824848 -8.040808 48.978830 0.152937 0.041179 0.000000 -0.227E-07 lgRho_cntr log_rel_run_E_err -11.5304096501345121 rel_E_err 2.9484267983685966D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7922666045851665E-002 1740 8.684457 1.778E+05 -23.009189 0.821652 51.757265 0.000000 0.000000 0.000000 0.220341 -4.342954 1626 20 1.4851E+00 8.684457 0.229864 -3.737666 5.129626 -4.174074 51.757265 0.000000 0.800038 0.779659 0.154096 5 2.8660E+05 3.407670 6.414631 0.821640 -31.294500 -8.007061 48.983269 0.152937 0.041179 0.000000 -0.206E-07 lgRho_cntr log_rel_run_E_err -11.5312600697366534 rel_E_err 2.9426589456758226D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7702239811423304E-002 1750 8.702764 1.803E+05 -22.778583 1.159210 51.741123 0.000000 0.000000 0.000000 0.219260 -4.282437 1678 20 1.4039E+00 8.702764 0.219423 -3.161807 5.279784 -4.168170 51.741123 0.000000 0.800038 0.780740 0.154255 5 2.8684E+05 3.463937 6.417655 1.159190 -28.830779 -7.974048 48.978883 0.152937 0.041179 0.000000 -0.190E-07 lgRho_cntr log_rel_run_E_err -11.4620743885430212 rel_E_err 3.4508462612526579D-12 save photos/x750 for model 1750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7470819195726786E-002 1760 8.719355 1.824E+05 -24.932612 1.460213 51.726308 0.000000 0.000000 0.000000 0.218372 -4.227764 1684 20 1.3264E+00 8.719355 0.210593 -2.661212 5.427775 -4.162837 51.726308 0.000000 0.800038 0.781628 0.154401 5 2.8706E+05 3.514940 6.420400 1.460180 -26.688403 -7.945662 48.978883 0.152937 0.041179 0.000000 -0.175E-07 lgRho_cntr log_rel_run_E_err -11.5069870208471805 rel_E_err 3.1118093340172282D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7254971402984777E-002 1770 8.735540 1.844E+05 -24.719307 1.750470 51.711818 0.000000 0.000000 0.000000 0.217597 -4.173189 1701 20 1.3151E+00 8.735540 0.202481 -2.190293 5.589732 -4.157586 51.711818 0.000000 0.800038 0.782403 0.154616 5 2.8727E+05 3.565309 6.423069 1.750420 -24.673415 -7.919257 48.978883 0.152937 0.041179 0.000000 -0.166E-07 lgRho_cntr log_rel_run_E_err -11.5239235046311972 rel_E_err 2.9927917318305522D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7037931766215089E-002 1780 8.751519 1.863E+05 -24.619974 2.033612 51.697758 0.000000 0.000000 0.000000 0.216886 -4.117005 1720 20 1.2898E+00 8.751519 0.194928 -1.742031 5.772549 -4.152329 51.697758 0.000000 0.800038 0.783114 0.154957 5 2.8747E+05 3.616111 6.425677 2.033539 -22.753804 -7.894412 48.978883 0.152936 0.041179 0.000000 -0.162E-07 lgRho_cntr log_rel_run_E_err -11.5009242006886065 rel_E_err 3.1555553281585274D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6817088296719059E-002 1790 8.767153 1.881E+05 -24.529162 2.306300 51.684677 0.000000 0.000000 0.000000 0.216315 -4.058083 1764 20 1.2423E+00 8.767153 0.187819 -1.319487 5.976793 -4.147033 51.684677 0.000000 0.800038 0.783685 0.155503 5 2.8765E+05 3.667600 6.428163 2.306198 -20.939920 -7.870554 48.978883 0.152936 0.041180 0.000000 -0.170E-07 lgRho_cntr log_rel_run_E_err -11.4984867354585774 rel_E_err 3.1733155840940745D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6594321369196716E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.782272 1.899E+05 -24.026269 2.564456 51.673232 0.000000 0.000000 0.000000 0.215889 -3.995174 1774 20 1.1644E+00 8.782272 0.180986 -0.926056 6.197461 -4.141942 51.673232 0.000000 0.800038 0.784111 0.156349 5 2.8781E+05 3.720027 6.430462 2.564316 -19.243746 -7.846798 48.978883 0.152936 0.041181 0.000000 -0.197E-07 lgRho_cntr log_rel_run_E_err -11.4863742073234807 rel_E_err 3.2630655085901620D-12 save LOGS/profile21.data for model 1800 save photos/x800 for model 1800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6372146063007651E-002 1810 8.796742 1.916E+05 -23.618768 2.809060 51.663958 0.000000 0.000000 0.000000 0.215555 -3.927503 1775 20 1.0524E+00 8.796742 0.174241 -0.563466 6.426008 -4.137435 51.663958 0.000000 0.800037 0.784445 0.157561 5 2.8794E+05 3.773492 6.432521 2.808876 -17.671631 -7.822189 48.978883 0.152934 0.041183 0.000000 -0.256E-07 lgRho_cntr log_rel_run_E_err -11.4946759531885832 rel_E_err 3.2012828411128849D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6152775286011534E-002 retry: eos evaluated at too low a density 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 2 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 2 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 2 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 2 1820 retry: logRho < hydro_mtx_min_allowed_logRho 4 1820 retry: logRho < hydro_mtx_min_allowed_logRho 3 1820 retry: eos evaluated at too low a density 1820 retry: logRho > hydro_mtx_max_allowed_logRho 26 1820 retry: eos evaluated at too low a density 1820 1820 8.809187 1.928E+05 -23.475300 3.028330 51.657591 0.000000 0.000000 0.000000 0.215334 -3.862656 1791 38 -4.5085E+00 8.809187 0.169656 -0.262227 6.631971 -4.145629 51.657591 0.000000 0.800035 0.784666 0.158966 14 2.8803E+05 3.822393 6.434121 3.028107 -16.358323 -8.137911 48.978883 0.152931 0.041188 0.000000 0.150E-01 retry log_rel_run_E_err -11.4939354993260530 rel_E_err 3.2067455495070275D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5958343890245737E-002 1830 8.809187 1.929E+05 -17.729595 3.028333 51.657591 0.000000 0.000000 0.000000 0.215334 -3.862655 1793 38 -3.7166E+00 8.809187 0.169074 -0.262223 6.631974 -4.136631 51.657591 0.000000 0.800035 0.784666 0.158966 3 2.8803E+05 3.822394 6.433926 3.028110 -16.358306 -8.134891 48.978883 0.152931 0.041188 0.000000 0.313E-07 max increase log_rel_run_E_err -11.5044904633301659 rel_E_err 3.1297491969522963D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5958341393148167E-002 1840 8.809188 1.929E+05 -20.904771 3.028351 51.657591 0.000000 0.000000 0.000000 0.215334 -3.862649 1792 38 -2.9248E+00 8.809188 0.169082 -0.262200 6.631990 -4.137458 51.657591 0.000000 0.800035 0.784666 0.158967 3 2.8803E+05 3.822398 6.433935 3.028128 -16.358204 -8.134958 48.978883 0.152931 0.041188 0.000000 0.293E-06 max increase log_rel_run_E_err -11.5141204884079293 rel_E_err 3.0611140562700500D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5958325870598192E-002 1850 8.809194 1.929E+05 -19.715825 3.028462 51.657588 0.000000 0.000000 0.000000 0.215334 -3.862616 1772 38 -2.1330E+00 8.809194 0.169096 -0.262057 6.632092 -4.138803 51.657588 0.000000 0.800035 0.784666 0.158967 3 2.8803E+05 3.822422 6.433953 3.028240 -16.357573 -8.135085 48.978883 0.152931 0.041188 0.000000 0.242E-07 max increase log_rel_run_E_err -11.5078288787325835 rel_E_err 3.1057830916967803D-12 save photos/x850 for model 1850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5958229738427385E-002 1860 8.809232 1.929E+05 -19.195021 3.029154 51.657571 0.000000 0.000000 0.000000 0.215333 -3.862411 1757 38 -1.3412E+00 8.809232 0.169086 -0.261164 6.632723 -4.138402 51.657571 0.000000 0.800035 0.784667 0.158972 3 2.8803E+05 3.822574 6.433962 3.028931 -16.353660 -8.135081 48.978883 0.152931 0.041188 0.000000 -0.227E-07 max increase log_rel_run_E_err -11.5081176446208939 rel_E_err 3.1037187179657172D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5957634190354264E-002 1870 8.809465 1.929E+05 -19.843909 3.033456 51.657468 0.000000 0.000000 0.000000 0.215328 -3.861135 1754 38 -5.4939E-01 8.809465 0.168973 -0.255622 6.636643 -4.137880 51.657468 0.000000 0.800035 0.784672 0.159002 3 2.8803E+05 3.823518 6.433992 3.033233 -16.329369 -8.134740 48.978883 0.152931 0.041188 0.000000 -0.252E-07 max increase log_rel_run_E_err -11.5084126891175647 rel_E_err 3.1016108759914291D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5953934301796742E-002 1880 8.810939 1.931E+05 -19.287934 3.060832 51.656827 0.000000 0.000000 0.000000 0.215307 -3.853030 1739 38 2.4242E-01 8.810939 0.168221 -0.220693 6.661437 -4.136163 51.656827 0.000000 0.800035 0.784693 0.159192 3 2.8804E+05 3.829495 6.434168 3.060605 -16.176275 -8.132351 48.978883 0.152931 0.041189 0.000000 -0.255E-07 max increase log_rel_run_E_err -11.5243953816524858 rel_E_err 2.9895417188451542D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5930523823455555E-002 1890 8.820720 1.944E+05 -18.148652 3.253666 51.653088 0.000000 0.000000 0.000000 0.215172 -3.797290 1739 38 8.6660E-01 8.820720 0.163039 0.008543 6.827398 -4.133449 51.653088 0.000000 0.800032 0.784828 0.160565 3 2.8809E+05 3.870026 6.435349 3.253419 -15.172464 -8.115628 48.978883 0.152926 0.041196 0.000000 -0.343E-07 lgRho_cntr log_rel_run_E_err -11.5144027308731207 rel_E_err 3.0591253234386645D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5772899525623405E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 8.833884 1.962E+05 -17.779150 3.550823 51.649376 0.000000 0.000000 0.000000 0.215036 -3.717639 1745 38 6.0755E-01 8.833884 0.155476 0.308909 7.052761 -4.130701 51.649376 0.000000 0.800024 0.784964 0.162688 3 2.8814E+05 3.926613 6.436794 3.550574 -13.854928 -8.089812 48.978883 0.152914 0.041216 0.000000 -0.547E-07 lgRho_cntr log_rel_run_E_err -11.5234528674380314 rel_E_err 2.9960367248673348D-12 save LOGS/profile22.data for model 1900 save photos/x900 for model 1900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5554198299276143E-002 1910 8.846447 1.981E+05 -17.730328 3.877246 51.646971 0.000000 0.000000 0.000000 0.214947 -3.638114 1753 38 4.2493E-01 8.846447 0.147740 0.587485 7.267768 -4.128406 51.646971 0.000000 0.800010 0.785053 0.164939 3 2.8817E+05 3.982173 6.438040 3.877023 -12.632681 -8.062327 48.978883 0.152893 0.041251 0.000000 -0.859E-07 lgRho_cntr log_rel_run_E_err -11.5248292512039097 rel_E_err 2.9865565935598272D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5337379632654759E-002 1920 8.858837 2.001E+05 -17.404045 4.233424 51.645390 0.000000 0.000000 0.000000 0.214887 -3.557775 1755 38 2.3902E-01 8.858837 0.139649 0.855235 7.478130 -4.126436 51.645390 0.000000 0.799985 0.785113 0.167303 3 2.8819E+05 4.037829 6.439161 4.233242 -11.460112 -8.032848 48.978883 0.152854 0.041314 0.000000 -0.137E-06 lgRho_cntr log_rel_run_E_err -11.5252012422162977 rel_E_err 2.9839995807579533D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5114289318254383E-002 1930 8.871152 2.022E+05 -17.321460 4.610597 51.644357 0.000000 0.000000 0.000000 0.214848 -3.477177 1766 38 5.2213E-02 8.871152 0.131235 1.114944 7.684432 -4.124751 51.644357 0.000000 0.799941 0.785152 0.169738 3 2.8821E+05 4.093505 6.440186 4.610458 -10.326482 -8.001689 48.978883 0.152788 0.041422 0.000000 -0.217E-06 lgRho_cntr log_rel_run_E_err -11.5440882728990317 rel_E_err 2.8570097803711834D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4881655520487861E-002 1940 8.883455 2.043E+05 -17.019480 5.001268 51.643683 0.000000 0.000000 0.000000 0.214822 -3.396694 1793 38 -1.3329E-01 8.883455 0.122538 1.368549 7.887171 -4.123342 51.643683 0.000000 0.799867 0.785178 0.172217 3 2.8822E+05 4.149148 6.441138 5.001167 -9.223928 -7.969017 48.978883 0.152675 0.041608 0.000000 -0.342E-06 lgRho_cntr log_rel_run_E_err -11.5259791978952464 rel_E_err 2.9786590996616367D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4635980908778516E-002 1950 8.895805 2.066E+05 -16.669552 5.399627 51.643241 0.000000 0.000000 0.000000 0.214806 -3.316559 1803 38 -3.1863E-01 8.895805 0.113593 1.617244 8.086604 -4.122059 51.643241 0.000000 0.799740 0.785194 0.174725 3 2.8822E+05 4.204757 6.442033 5.399555 -8.147901 -7.934918 48.978883 0.152482 0.041925 0.000000 -0.537E-06 lgRho_cntr log_rel_run_E_err -11.5347301261623549 rel_E_err 2.9192404883519389D-12 save photos/x950 for model 1950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4373528725823619E-002 1960 8.908227 2.088E+05 -19.069979 5.802265 51.642951 0.000000 0.000000 0.000000 0.214794 -3.236984 1815 38 -5.0102E-01 8.908227 0.104434 1.861816 8.282898 -4.120939 51.642951 0.000000 0.799524 0.785206 0.177254 4 2.8823E+05 4.260281 6.442886 5.802216 -7.094646 -7.899476 48.978883 0.152153 0.042466 0.000000 -0.832E-06 lgRho_cntr log_rel_run_E_err -11.5132623914766814 rel_E_err 3.0671683107002177D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4090023069610455E-002 1970 8.920751 2.112E+05 -16.104286 6.207087 51.642759 0.000000 0.000000 0.000000 0.214787 -3.158106 1826 38 -6.8068E-01 8.920751 0.095097 2.102896 8.476239 -4.120014 51.642759 0.000000 0.799156 0.785213 0.179811 3 2.8823E+05 4.315717 6.443709 6.207052 -6.060853 -7.862787 48.978883 0.151593 0.043387 0.000001 -0.128E-05 lgRho_cntr log_rel_run_E_err -11.6352899650548096 rel_E_err 2.3158479133187106D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3780331073029151E-002 retry: logT < hydro_mtx_min_allowed_logT 70 1971 1980 8.931481 2.131E+05 -16.046059 6.551438 51.642649 0.000000 0.000000 0.000000 0.214782 -3.091810 1837 39 -8.3658E-01 8.931481 0.087600 2.305118 8.638182 -4.120401 51.642649 0.000000 0.798648 0.785218 0.182016 3 2.8823E+05 4.362686 6.444158 6.551414 -5.196084 -8.092278 48.978883 0.150820 0.044657 0.000001 -0.137E-05 lgRho_cntr log_rel_run_E_err -11.7055852471777815 rel_E_err -1.9697665260005957D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3492335180002110E-002 1990 8.944256 2.156E+05 -17.464346 6.956747 51.642558 0.000000 0.000000 0.000000 0.214778 -3.014781 1843 39 -1.0036E+00 8.944256 0.077983 2.540847 8.826401 -4.119178 51.642558 0.000000 0.797661 0.785222 0.184683 4 2.8823E+05 4.417824 6.444945 6.956731 -4.189559 -8.059053 48.978883 0.149315 0.047127 0.000002 -0.205E-05 lgRho_cntr log_rel_run_E_err -11.5155863443808286 rel_E_err 3.0507994232875273D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3117399546085414E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 8.957266 2.181E+05 -16.662091 7.362490 51.642497 0.000000 0.000000 0.000000 0.214776 -2.938924 1849 39 -1.1722E+00 8.957266 0.068190 2.775231 9.012883 -4.118225 51.642497 0.000000 0.795972 0.785224 0.187499 4 2.8823E+05 4.472900 6.445731 7.362479 -3.187033 -8.024551 48.978883 0.146740 0.051353 0.000004 -0.306E-05 lgRho_cntr log_rel_run_E_err -11.5312727669587556 rel_E_err 2.9425729140784255D-12 save LOGS/profile23.data for model 2000 save photos/2000 for model 2000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2693742165319744E-002 2010 8.970574 2.193E+05 -15.229491 7.767575 51.642497 0.000000 0.000000 0.000000 0.214776 -2.864804 1866 39 -1.3351E+00 8.970574 0.066396 3.008993 9.198070 -99.000000 51.642497 0.000000 0.793094 0.785224 0.190578 3 2.8823E+05 4.527787 6.451389 7.767568 -2.180804 -8.040987 48.978883 0.142341 0.058554 0.000007 -0.389E-05 lgRho_cntr log_rel_run_E_err -10.9916513773135769 rel_E_err -1.0194093736513674D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2209668075731850E-002 2020 8.984297 2.218E+05 -14.414756 8.171728 51.642497 0.000000 0.000000 0.000000 0.214776 -2.793065 1878 39 -1.4895E+00 8.984297 0.056947 3.244042 9.383401 -99.000000 51.642497 0.000000 0.788234 0.785224 0.194134 4 2.8823E+05 4.582416 6.452454 8.171723 -1.156420 -8.007579 48.978883 0.134887 0.070712 0.000013 -0.604E-05 lgRho_cntr log_rel_run_E_err -11.5297089524328769 rel_E_err 2.9531876771895698D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1647625571646862E-002 2030 8.998630 2.245E+05 -13.312879 8.571406 51.642497 0.000000 0.000000 0.000000 0.214776 -2.724579 1890 39 -1.6360E+00 8.998630 0.046884 3.482023 9.570030 -99.000000 51.642497 0.000000 0.780268 0.785224 0.198492 4 2.8823E+05 4.636758 6.453442 8.571402 -0.101835 -7.970657 48.978883 0.122589 0.090643 0.000026 -0.888E-05 lgRho_cntr log_rel_run_E_err -11.4704155628428595 rel_E_err 3.3852008180873573D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0985744523165744E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/bbarker/ceph/mesa_testing/work/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net 2040 9.006668 2.260E+05 -13.830917 8.783522 51.642497 0.000000 0.000000 0.000000 0.214776 -2.689057 1884 39 -1.7294E+00 9.006668 0.041252 3.612391 9.671894 -99.000000 51.642497 0.000000 0.774319 0.785224 0.201315 3 2.8823E+05 4.666015 6.453978 8.783519 0.483133 -7.949622 48.978883 0.113338 0.105527 0.000036 -0.109E-04 Lnuc log_rel_run_E_err -11.1108504199038070 rel_E_err -7.7472858457253433D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0576587173540367E-002 2050 9.021652 2.289E+05 -13.107573 9.148575 51.642497 0.000000 0.000000 0.000000 0.214776 -2.627556 1882 39 -1.8434E+00 9.021652 0.030696 3.851011 9.857144 -99.000000 51.642497 0.000000 0.760254 0.785224 0.207501 3 2.8823E+05 4.718573 6.454940 9.148573 1.560354 -7.909608 48.978883 0.091207 0.140718 0.000068 -0.152E-04 lgRho_cntr log_rel_run_E_err -11.1655049816454639 rel_E_err -6.8311688213108916D-12 save photos/x050 for model 2050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9730085687860163E-002 2060 9.037139 2.320E+05 -12.865042 9.483325 51.642497 0.000000 0.000000 0.000000 0.214776 -2.564169 1853 39 -1.9820E+00 9.037139 0.019544 4.096711 10.046454 -99.000000 51.642497 0.000000 0.743625 0.785224 0.215033 5 2.8823E+05 4.772849 6.455931 9.483323 2.656953 -7.866862 48.978883 0.064516 0.182329 0.000118 -0.211E-04 lgRho_cntr log_rel_run_E_err -10.6381986806186539 rel_E_err 2.3003891968307627D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.8705519909125241E-002 2070 9.051784 2.351E+05 -14.020217 9.758585 51.642497 0.000000 0.000000 0.000000 0.214776 -2.496184 1791 39 -2.1396E+00 9.051784 0.008675 4.331012 10.225533 -99.000000 51.642497 0.000000 0.729428 0.785224 0.222567 3 2.8823E+05 4.827638 6.456872 9.758584 3.663881 -7.824944 48.978883 0.041184 0.217861 0.000180 -0.290E-04 lgRho_cntr log_rel_run_E_err -11.7006808662412940 rel_E_err -1.9921366883158014D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.7559972555259481E-002 2080 9.065237 2.380E+05 -13.624276 9.980596 51.642497 0.000000 0.000000 0.000000 0.214776 -2.423287 1738 39 -2.2997E+00 9.065237 -0.001504 4.547719 10.389835 -99.000000 51.642497 0.000000 0.719874 0.785224 0.229156 5 2.8823E+05 4.882448 6.457775 9.980594 4.550467 -7.785698 48.978883 0.025120 0.241774 0.000235 -0.388E-04 lgRho_cntr log_rel_run_E_err -8.4849478849505537 rel_E_err 3.2737997790178188D-09 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6332925810653283E-002 2090 9.077860 2.407E+05 -15.905378 10.167393 51.642497 0.000000 0.000000 0.000000 0.214776 -2.347665 1697 39 -2.4517E+00 9.077860 -0.011082 4.749063 10.541295 -99.000000 51.642497 0.000000 0.714086 0.785224 0.234726 4 2.8823E+05 4.936980 6.458650 10.167392 5.339932 -7.748822 48.978883 0.015188 0.256259 0.000279 -0.521E-04 lgRho_cntr log_rel_run_E_err -11.5549428472376619 rel_E_err 2.7864878437906324D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5031940169542836E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.090053 2.434E+05 -11.370271 10.333630 51.642497 0.000000 0.000000 0.000000 0.214776 -2.271073 1660 39 -2.5929E+00 9.090053 -0.020225 4.939906 10.683831 -99.000000 51.642497 0.000000 0.710660 0.785224 0.239543 3 2.8823E+05 4.991181 6.459509 10.333629 6.065793 -7.713704 48.978883 0.009200 0.264828 0.000312 -0.661E-04 lgRho_cntr log_rel_run_E_err -12.5513566982308404 rel_E_err 2.8095922855981221D-13 save LOGS/profile24.data for model 2100 save photos/x100 for model 2100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.3642690931021554E-002 2110 9.102159 2.460E+05 -11.931204 10.487652 51.642497 0.000000 0.000000 0.000000 0.214776 -2.194333 1620 39 -2.7304E+00 9.102159 -0.029160 5.123640 10.820116 -99.000000 51.642497 0.000000 0.708631 0.785224 0.243838 3 2.8823E+05 5.045301 6.460372 10.487650 6.749908 -7.679505 48.978883 0.005588 0.269893 0.000337 -0.943E-04 lgRho_cntr log_rel_run_E_err -11.2731089255436174 rel_E_err 5.3320114635842561D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2152175372470435E-002 2120 9.114290 2.486E+05 -11.399283 10.634061 51.642497 0.000000 0.000000 0.000000 0.214776 -2.118118 1584 39 -2.8632E+00 9.114290 -0.037792 5.302251 10.951755 -99.000000 51.642497 0.000000 0.707435 0.785224 0.247765 3 2.8823E+05 5.099250 6.461249 10.634059 7.405572 -7.646668 48.978883 0.003396 0.272870 0.000357 -0.119E-03 lgRho_cntr log_rel_run_E_err -11.1046309321963470 rel_E_err 7.8590321934269720D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.0552795794156207E-002 2130 9.126543 2.512E+05 -15.162150 10.775894 51.642497 0.000000 0.000000 0.000000 0.214776 -2.042631 1545 39 -2.9930E+00 9.126543 -0.046406 5.477354 11.080036 -99.000000 51.642497 0.000000 0.706770 0.785224 0.251425 5 2.8823E+05 5.153116 6.462144 10.775892 8.041551 -7.614047 48.978883 0.002059 0.274511 0.000378 -0.160E-03 lgRho_cntr log_rel_run_E_err -11.3595583926825423 rel_E_err 4.3695992405855237D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.8837300419466246E-002 2140 9.139023 2.538E+05 -10.940542 10.914083 51.642497 0.000000 0.000000 0.000000 0.214776 -1.968174 1497 39 -3.1228E+00 9.139023 -0.054771 5.648666 11.204776 -99.000000 51.642497 0.000000 0.706553 0.785224 0.254853 3 2.8823E+05 5.206955 6.463085 10.914080 8.657543 -7.582668 48.978883 0.001244 0.275032 0.000405 -0.203E-03 lgRho_cntr log_rel_run_E_err -10.9865990192579144 rel_E_err 1.0313379073124417D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7017644096546129E-002 2150 9.152476 2.566E+05 -15.605042 11.062371 51.642497 0.000000 0.000000 0.000000 0.214776 -1.889664 1470 39 -3.0634E+00 9.152476 -0.063892 5.832446 11.337879 -99.000000 51.642497 0.000000 0.707108 0.785224 0.258363 5 2.8823E+05 5.264261 6.464141 11.062368 9.313520 -7.548553 48.978883 0.000715 0.273631 0.000469 -0.292E-03 lgRho_cntr log_rel_run_E_err -11.4887844347262948 rel_E_err 3.2450064567442133D-12 save photos/x150 for model 2150 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.4913229175554476E-002 2160 9.166270 2.595E+05 -10.568647 11.211847 51.642497 0.000000 0.000000 0.000000 0.214776 -1.813946 1432 39 -3.3823E+00 9.166270 -0.072931 6.013862 11.468506 -99.000000 51.642497 0.000000 0.709748 0.785224 0.261570 3 2.8823E+05 5.321003 6.465200 11.211844 9.951329 -7.514709 48.978883 0.000408 0.267105 0.000667 -0.380E-03 lgRho_cntr log_rel_run_E_err -11.9790332854735375 rel_E_err 1.0494619920373290D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.2689414416196003E-002 retry: check_lgL_power_photo_change hard limit 2162 2170 9.174507 2.612E+05 -10.743673 11.302462 51.642497 0.000000 0.000000 0.000000 0.214776 -1.771950 1415 40 -3.6998E+00 9.174507 -0.078224 6.119237 11.544108 -99.000000 51.642497 0.000000 0.713571 0.785224 0.263248 3 2.8823E+05 5.353525 6.465844 11.302459 10.315643 -7.494896 48.978883 0.000290 0.257727 0.000987 -0.447E-03lgL_power_phot log_rel_run_E_err -11.8496827248756524 rel_E_err 1.4135698551564674D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.1334902942594949E-002 2180 9.182441 2.627E+05 -13.638835 11.390723 51.642497 0.000000 0.000000 0.000000 0.214776 -1.734873 1401 40 -3.7634E+00 9.182441 -0.083067 6.218461 11.615083 -99.000000 51.642497 0.000000 0.720424 0.785224 0.264630 4 2.8823E+05 5.383422 6.466453 11.390720 10.651479 -7.476751 48.978883 0.000208 0.241080 0.001732 -0.475E-03lgL_power_phot log_rel_run_E_err -11.5661719816379147 rel_E_err 2.7153637654544097D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0021210967039790E-002 2190 9.190602 2.644E+05 -10.223065 11.483206 51.642497 0.000000 0.000000 0.000000 0.214776 -1.701441 1395 40 -3.8196E+00 9.190602 -0.088154 6.318035 11.686088 -99.000000 51.642497 0.000000 0.732532 0.785224 0.265737 3 2.8823E+05 5.412174 6.467108 11.483203 10.976507 -7.457662 48.978883 0.000145 0.212124 0.003644 -0.636E-03lgL_power_phot log_rel_run_E_err -11.7836477323351687 rel_E_err -1.6457060574070972D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.8669169300068542E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.199016 2.660E+05 -10.454277 11.580264 51.642497 0.000000 0.000000 0.000000 0.214776 -1.672509 1377 40 -3.8634E+00 9.199016 -0.093164 6.418320 11.757394 -99.000000 51.642497 0.000000 0.751800 0.785224 0.266531 4 2.8823E+05 5.439456 6.467742 11.580261 11.283529 -7.438749 48.978883 0.000096 0.167356 0.008445 -0.688E-03lgL_power_phot log_rel_run_E_err -11.5792986443867267 rel_E_err 2.6345191248804812D-12 save LOGS/profile25.data for model 2200 save photos/x200 for model 2200 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.7276806112025062E-002 2210 9.207684 2.677E+05 -9.080019 11.680293 51.642497 0.000000 0.000000 0.000000 0.214776 -1.646276 1362 40 -3.8885E+00 9.207684 -0.098335 6.520945 11.830166 -99.000000 51.642497 0.000000 0.777505 0.785224 0.267181 3 2.8823E+05 5.466029 6.468428 11.680290 11.563931 -7.419213 48.978883 0.000059 0.110629 0.018889 -0.722E-03lgL_power_phot log_rel_run_E_err -11.3847239888134339 rel_E_err 4.1235950648575648D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.5824127186260275E-002 2220 9.218051 2.698E+05 -10.900220 11.794973 51.642497 0.000000 0.000000 0.000000 0.214776 -1.611104 1336 40 -3.7613E+00 9.218051 -0.104694 6.646510 11.918861 -99.000000 51.642497 0.000000 0.807433 0.785224 0.268350 4 2.8823E+05 5.499436 6.469174 11.794970 11.844451 -7.394812 48.978883 0.000028 0.050630 0.038968 -0.808E-03lgL_power_phot log_rel_run_E_err -11.5530761502245980 rel_E_err 2.7984905826353771D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.4015974476028217E-002 2230 9.231422 2.727E+05 -11.002310 11.937830 51.642497 0.000000 0.000000 0.000000 0.214776 -1.549365 1311 40 -3.8214E+00 9.231422 -0.113544 6.816602 12.038337 -99.000000 51.642497 0.000000 0.830384 0.785224 0.271063 4 2.8823E+05 5.549583 6.470375 11.937827 12.128008 -7.361027 48.983269 0.000006 0.011776 0.063159 -0.112E-02 lgRho_cntr log_rel_run_E_err -11.5687060923592142 rel_E_err 2.6995657383674062D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.1527637201367779E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2236 2240 9.239696 2.732E+05 -11.446560 12.032554 51.642497 0.000000 0.000000 0.000000 0.214776 -1.505170 2533 40 -5.2616E+00 9.239696 -0.117347 6.925807 12.114636 -99.000000 51.642497 0.000000 0.836263 0.785224 0.273097 5 2.8823E+05 5.583218 6.466202 12.032550 12.275423 -7.812216 48.983269 0.000002 0.003443 0.071222 0.161E-01 max increase log_rel_run_E_err -10.9757408388536550 rel_E_err 2.5347000662269698D-12 check gamma integral 9.9159839140405253E-003 2250 9.241682 2.730E+05 -8.525606 12.053233 51.642497 0.000000 0.000000 0.000000 0.214776 -1.494238 2534 40 -4.4697E+00 9.241682 -0.113914 6.951049 12.132300 -99.000000 51.642497 0.000000 0.837067 0.785224 0.273600 5 2.8823E+05 5.591434 6.471778 12.053230 12.303884 -7.867086 48.983269 0.000001 0.002365 0.072407 -0.655E-03 max increase log_rel_run_E_err -10.4412461840631714 rel_E_err 2.6031936244297495D-12 save photos/x250 for model 2250 check gamma integral 9.5414248533044130E-003 2260 9.252576 2.755E+05 -8.575013 12.162077 51.642497 0.000000 0.000000 0.000000 0.214776 -1.433160 2534 40 -4.0498E+00 9.252576 -0.121066 7.087496 12.227376 -99.000000 51.642497 0.000000 0.838710 0.785224 0.276401 5 2.8823E+05 5.637003 6.472894 12.162073 12.441370 -7.850319 48.983269 0.000000 0.000158 0.075061 -0.103E-02 lgRho_cntr log_rel_run_E_err -10.2050222630348664 rel_E_err 2.6381048497886342D-12 check gamma integral 7.5191886540034308E-003 2270 9.265850 2.784E+05 -7.840638 12.297336 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361698 2535 40 -4.2064E+00 9.265850 -0.129516 7.248136 12.338899 -99.000000 51.642497 0.000000 0.838619 0.785224 0.279556 5 2.8823E+05 5.691308 6.474199 12.297332 12.588771 -7.830763 48.983269 0.000000 0.000012 0.075531 -0.136E-02 lgRho_cntr log_rel_run_E_err -10.0485462787631619 rel_E_err 2.6633887943370158D-12 check gamma integral 5.1513904265710732E-003 2280 9.279389 2.813E+05 -7.054335 12.433089 51.642497 0.000000 0.000000 0.000000 0.214776 -1.292745 2534 40 -4.3330E+00 9.279389 -0.137826 7.406270 12.448552 -99.000000 51.642497 0.000000 0.838116 0.785224 0.282543 5 2.8823E+05 5.745073 6.475529 12.433085 12.726880 -7.812073 48.983269 0.000000 0.000011 0.076246 -0.178E-02 lgRho_cntr log_rel_run_E_err -9.9316320438900298 rel_E_err 2.8464196427253275D-12 check gamma integral 2.8519258484564916E-003 reached high velocities 0.40535532036837152 stopping in at least 1480.1677183466643 seconds 2290 9.293322 2.842E+05 -5.516148 12.570870 51.642497 0.000000 0.000000 0.000000 0.214776 -1.225915 2540 40 -4.4554E+00 9.293322 -0.146088 7.563980 12.557991 -99.000000 51.642497 0.000000 0.836855 0.785224 0.285503 5 2.8823E+05 5.798702 6.476909 12.570866 12.862841 -7.807102 48.983269 0.000000 0.000010 0.078026 -0.227E-02 lgRho_cntr log_rel_run_E_err -9.8531390001275732 rel_E_err -7.1241253799735743D-13 check gamma integral 6.1010955852047288E-004 save LOGS/gamma1_prof001.data for model 2293 retry: check_lgL_power_photo_change hard limit 2299 residual_norm > tol_residual_norm 2299 4.6496068265618361D-05 9.9999999999999995D-07 max_residual > tol_max_residual 2299 5.0147635826945655D-03 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2299 1.4545116214126016D-03 1.2837291247800619D-03 4.2790970826002062D-01 retry: avg corr, avg+max resid -- give up in solver 2299 residual_norm > tol_residual_norm 2300 6.1910529183594590D-05 9.9999999999999995D-07 max_residual > tol_max_residual 2300 5.8277870386998403D-03 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2300 8.8247717893370475D-03 3.0000000000000003D-04 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 2300 3.2405620922120093D-01 2.9999999999999999D-02 1.0000000000000001D-01 retry: avg+max corr+resid -- give up in solver 2300 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.292767 2.837E+05 -7.707848 12.315653 51.642497 0.000000 0.000000 0.000000 0.214776 -1.210192 2544 43 -5.4682E+00 9.292767 -0.145024 7.538349 12.545113 -99.000000 51.642497 0.000000 0.834742 0.785224 0.287783 4 2.8823E+05 5.804471 6.476362 12.315646 12.531486 -7.807799 48.983269 0.000000 0.000011 0.080988 -0.182E-01 retry log_rel_run_E_err -9.1206597928231012 rel_E_err 3.0856919655618913D-12 save LOGS/profile26.data for model 2300 save photos/x300 for model 2300 check gamma integral 8.8413887955470416E-004 residual_norm > tol_residual_norm 2301 8.7609062075865089D-06 9.9999999999999995D-07 retry: avg resid -- give up in solver 2301 retry: check_lgL_power_photo_change hard limit 2301 retry: check_lgL_power_photo_change hard limit 2303 retry: check_lgL_power_photo_change hard limit 2305 retry: check_lgL_power_photo_change hard limit 2308 2310 9.301128 2.849E+05 -7.512457 12.573927 51.642497 0.000000 0.000000 0.000000 0.214776 -1.185133 2544 48 -6.2952E+00 9.301128 -0.150309 7.644039 12.615050 -99.000000 51.642497 0.000000 0.834693 0.785224 0.287946 3 2.8823E+05 5.830226 6.472647 12.573922 12.847074 -7.777091 48.983269 0.000000 0.000010 0.081058 -0.139E+00lgL_power_phot log_rel_run_E_err -9.0981877399665105 rel_E_err 2.4105708241962672D-12 check gamma integral -5.2281544355283166E-004 retry: check_lgL_power_photo_change hard limit 2312 retry: check_lgL_power_photo_change hard limit 2319 2320 9.311163 2.859E+05 -7.487606 12.892678 51.642497 0.000000 0.000000 0.000000 0.214776 -1.155297 2545 50 -6.7829E+00 9.311163 -0.155948 7.768501 12.698099 -99.000000 51.642497 0.000000 0.834648 0.785224 0.288119 3 2.8823E+05 5.861050 6.467555 12.892675 13.220119 -7.740925 48.983269 0.000000 0.000010 0.081121 -0.263E+00 max increase log_rel_run_E_err -9.0789285429111235 rel_E_err 2.9465574283842867D-12 check gamma integral -2.1397683865130505E-003 2330 9.323041 2.866E+05 -7.186500 13.277285 51.642497 0.000000 0.000000 0.000000 0.214776 -1.119919 2548 50 -6.8316E+00 9.323041 -0.161644 7.911613 12.794997 -99.000000 51.642497 0.000000 0.834579 0.785224 0.288341 3 2.8823E+05 5.897591 6.460598 13.277283 13.649646 -7.699260 48.983269 0.000000 0.000010 0.081219 -0.417E+00lgL_power_phot log_rel_run_E_err -9.0470476744041495 rel_E_err 9.9766848907075239D-12 check gamma integral -3.9369628417432346E-003 retry: check_lgL_power_photo_change hard limit 2336 2340 9.334837 2.870E+05 -7.218731 13.662280 51.642497 0.000000 0.000000 0.000000 0.214776 -1.084713 2550 51 -7.1103E+00 9.334837 -0.166498 8.049775 12.889751 -99.000000 51.642497 0.000000 0.834467 0.785224 0.288590 3 2.8823E+05 5.933946 6.453141 13.662279 14.060807 -7.660412 48.983269 0.000000 0.000009 0.081376 -0.574E+00lgL_power_phot log_rel_run_E_err -9.0194311966237279 rel_E_err 3.5466506517621431D-12 check gamma integral -5.5879431966956656E-003 2350 9.346435 2.871E+05 -7.281160 14.036844 51.642497 0.000000 0.000000 0.000000 0.214776 -1.050082 2551 51 -7.2079E+00 9.346435 -0.170676 8.182143 12.981587 -99.000000 51.642497 0.000000 0.834270 0.785224 0.288872 3 2.8823E+05 5.969742 6.445396 14.036844 14.446112 -7.624613 48.983269 0.000000 0.000009 0.081651 -0.732E+00lgL_power_phot log_rel_run_E_err -9.0046531995347472 rel_E_err 2.8810211793787893D-12 save photos/x350 for model 2350 check gamma integral -7.0768428478247339E-003 2360 9.359016 2.870E+05 -7.458041 14.426835 51.642497 0.000000 0.000000 0.000000 0.214776 -1.012682 2552 51 -7.3102E+00 9.359016 -0.174698 8.323088 13.079837 -99.000000 51.642497 0.000000 0.833852 0.785224 0.289237 3 2.8823E+05 6.008550 6.436780 14.426835 14.834330 -7.588716 48.983269 0.000000 0.000009 0.082233 -0.907E+00lgL_power_phot log_rel_run_E_err -8.9911611705811811 rel_E_err 2.6523306397045577D-12 check gamma integral -8.5404448561950917E-003 2370 9.372340 2.867E+05 -7.288918 14.802847 51.642497 0.000000 0.000000 0.000000 0.214776 -0.973604 2552 51 -7.3959E+00 9.372340 -0.178521 8.470833 13.182504 -99.000000 51.642497 0.000000 0.832901 0.785224 0.289745 3 2.8823E+05 6.049488 6.427644 14.802847 15.196700 -7.553988 48.983269 0.000001 0.000010 0.083563 -0.110E+01lgL_power_phot log_rel_run_E_err -8.9803194668272965 rel_E_err 2.0550783888350005D-12 check gamma integral -9.9215604793752576E-003 2380 9.386798 2.864E+05 -6.926824 15.145237 51.642497 0.000000 0.000000 0.000000 0.214776 -0.932747 2553 51 -7.4493E+00 9.386798 -0.182300 8.631425 13.292330 -99.000000 51.642497 0.000000 0.830452 0.785224 0.290600 3 2.8823E+05 6.093310 6.417822 15.145237 15.512734 -7.519613 48.983269 0.000001 0.000010 0.086987 -0.130E+01lgL_power_phot log_rel_run_E_err -8.9670223159703841 rel_E_err 2.8667944591223727D-12 check gamma integral -1.1228805627193684E-002 2390 9.405174 2.858E+05 -5.691931 15.475779 51.642497 0.000000 0.000000 0.000000 0.214776 -0.886995 2543 51 -7.3858E+00 9.405174 -0.186713 8.838746 13.428905 -99.000000 51.642497 0.000000 0.821359 0.785224 0.292962 3 2.8823E+05 6.146371 6.405487 15.475779 15.789367 -7.479892 48.983269 0.000003 0.000011 0.099657 -0.158E+01 lgRho_cntr log_rel_run_E_err -8.9451961369852118 rel_E_err -5.8715789521425376D-12 check gamma integral -1.2605148824703809E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.428346 2.850E+05 -7.789364 15.792312 51.642497 0.000000 0.000000 0.000000 0.214776 -0.857348 2528 51 -7.4166E+00 9.428346 -0.191825 9.105078 13.592963 -99.000000 51.642497 0.000000 0.778686 0.785224 0.303015 4 2.8823E+05 6.200582 6.390205 15.792312 15.995352 -7.434899 48.983269 0.000006 0.000014 0.156930 -0.193E+01 lgRho_cntr log_rel_run_E_err -8.9116739829203713 rel_E_err 3.8692408373438053D-12 save LOGS/profile27.data for model 2400 save photos/x400 for model 2400 check gamma integral -1.3882516486700240E-002 2410 9.448262 2.842E+05 -8.388814 16.028375 51.642497 0.000000 0.000000 0.000000 0.214776 -0.883392 2521 51 -7.7343E+00 9.448262 -0.196033 9.340312 13.725888 -99.000000 51.642497 0.000000 0.665299 0.785224 0.332530 4 2.8823E+05 6.222329 6.376967 16.028374 16.125396 -7.398942 48.983269 0.000013 0.000032 0.261393 -0.226E+01 XO_cntr log_rel_run_E_err -8.8720032665209505 rel_E_err 3.9616312313826224D-12 check gamma integral -1.4630384575907925E-002 2420 9.458526 2.837E+05 -8.777294 16.142505 51.642497 0.000000 0.000000 0.000000 0.214776 -0.917480 2517 51 -7.9373E+00 9.458526 -0.198404 9.476181 13.796538 -99.000000 51.642497 0.000000 0.554562 0.785224 0.366919 4 2.8823E+05 6.222418 6.369286 16.142504 16.237112 -7.379167 48.983269 0.000019 0.000048 0.288699 -0.245E+01 XO_cntr log_rel_run_E_err -8.8376758456742692 rel_E_err 4.2081198564777430D-12 check gamma integral -1.4938609737651026E-002 2430 9.465616 2.833E+05 -5.011355 16.216854 51.642497 0.000000 0.000000 0.000000 0.214776 -0.948322 2513 51 -7.9992E+00 9.465616 -0.200314 9.585779 13.849442 -99.000000 51.642497 0.000000 0.451606 0.785224 0.403791 3 2.8823E+05 6.217910 6.362990 16.216854 16.372033 -7.363490 48.983269 0.000024 0.000051 0.317407 -0.262E+01 XO_cntr log_rel_run_E_err -8.8078238942398208 rel_E_err 1.3443516324737656D-12 check gamma integral -1.5138691118535873E-002 2440 9.471863 2.828E+05 -4.885901 16.276747 51.642497 0.000000 0.000000 0.000000 0.214776 -0.978130 2508 51 -7.9815E+00 9.471863 -0.202432 9.705598 13.902387 -99.000000 51.642497 0.000001 0.343217 0.785224 0.448597 3 2.8823E+05 6.211698 6.355899 16.276747 16.546635 -7.346382 48.983269 0.000030 0.000047 0.353086 -0.281E+01 dX_nuc o16 log_rel_run_E_err -8.7590255400945747 rel_E_err -8.2856410424488512D-12 check gamma integral -1.5320442598485754E-002 2450 9.477364 2.822E+05 -4.474660 16.317670 51.642497 0.000000 0.000000 0.000000 0.214776 -1.004074 2503 51 -7.9025E+00 9.477364 -0.205068 9.848522 13.958094 -99.000000 51.642497 0.000001 0.236769 0.785224 0.500024 3 2.8823E+05 6.205580 6.346923 16.317670 16.751974 -7.325495 48.983269 0.000035 0.000038 0.388758 -0.306E+01 dX_nuc o16 log_rel_run_E_err -8.6754761970520349 rel_E_err -5.4579058462565253D-11 save photos/x450 for model 2450 check gamma integral -1.5501390478654200E-002 2460 9.481297 2.815E+05 -7.349422 16.323112 51.642497 0.000000 0.000000 0.000000 0.214776 -1.022406 2499 51 -7.7261E+00 9.481297 -0.208205 10.001291 14.007995 -99.000000 51.642497 0.000001 0.153657 0.785224 0.546795 4 2.8823E+05 6.200810 6.336029 16.323111 16.936028 -7.301217 48.983269 0.000038 0.000028 0.415615 -0.337E+01 dX_nuc o16 log_rel_run_E_err -8.5606143816561442 rel_E_err 5.9198802980266582D-12 check gamma integral -1.5672488845467018E-002 2470 9.482985 2.804E+05 -7.306247 16.264116 51.642497 0.000000 0.000000 0.000000 0.214776 -1.038212 2506 51 -7.6217E+00 9.482985 -0.212438 10.155691 14.045418 -99.000000 51.642497 0.000002 0.093255 0.785224 0.585672 4 2.8823E+05 6.194060 6.320960 16.264115 17.054194 -7.269412 48.983269 0.000037 0.000018 0.432494 -0.382E+01 dX_nuc o16 log_rel_run_E_err -8.4542503098234771 rel_E_err 6.8083061809140141D-12 check gamma integral -1.5876674117298251E-002 2480 9.476981 2.784E+05 -9.953690 15.978791 51.642497 0.000000 0.000000 0.000000 0.214776 -1.071522 2518 51 -7.4074E+00 9.476981 -0.219869 10.232523 14.028890 -99.000000 51.642497 0.000001 0.055215 0.785224 0.612520 5 2.8823E+05 6.166897 6.293500 15.978790 16.897071 -7.216108 48.983269 0.000029 0.000010 0.439069 -0.468E+01 max increase log_rel_run_E_err -8.3601392721759158 rel_E_err 8.6898787067863018D-12 check gamma integral -1.6309174917399496E-002 2490 9.457960 2.758E+05 -11.658045 15.377228 51.642497 0.000000 0.000000 0.000000 0.214776 -1.139688 2541 51 -7.7456E+00 9.457960 -0.228319 10.068743 13.903918 -99.000000 51.642497 0.000000 0.046524 0.785224 0.616837 5 2.8823E+05 6.102952 6.260684 15.377226 16.224398 -7.159705 48.983269 0.000017 0.000006 0.438379 -0.579E+01 lgRho_cntr log_rel_run_E_err -8.3156629572386880 rel_E_err 1.4162962176093697D-11 check gamma integral -1.6874794692875842E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.441521 2.742E+05 -12.531470 14.898139 51.642497 0.000000 0.000000 0.000000 0.214776 -1.197525 2561 51 -7.8948E+00 9.441521 -0.233420 9.889018 13.788197 -99.000000 51.642497 0.000000 0.045613 0.785224 0.615363 7 2.8823E+05 6.048849 6.240194 14.898135 15.612538 -7.126655 48.983269 0.000012 0.000004 0.437355 -0.654E+01 lgRho_cntr log_rel_run_E_err -8.2978870945323973 rel_E_err 9.3349102188767180D-12 save LOGS/profile28.data for model 2500 save photos/x500 for model 2500 check gamma integral -1.7062998629001375E-002 retry: logRho > hydro_mtx_max_allowed_logRho 1266 2507 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1264 2509 retry: logT > hydro_mtx_max_allowed_logT 1259 2510 2510 9.429256 2.731E+05 -12.753891 14.555077 51.642497 0.000000 0.000000 0.000000 0.214776 -1.241174 2568 54 -8.6255E+00 9.429256 -0.236737 9.751094 13.700121 -99.000000 51.642497 0.000000 0.045455 0.785224 0.613820 6 2.8823E+05 6.008497 6.226626 14.555071 15.144502 -7.105785 48.983269 0.000009 0.000003 0.436830 -0.706E+01 retry log_rel_run_E_err -8.2882375168347853 rel_E_err 8.8331869717131176D-12 check gamma integral -1.7032432005464289E-002 retry: logT < hydro_mtx_min_allowed_logT 1254 2512 retry: logT < hydro_mtx_min_allowed_logT 1402 2514 retry: logT < hydro_mtx_min_allowed_logT 1244 2517 2520 9.426771 2.729E+05 -12.918086 14.486943 51.642497 0.000000 0.000000 0.000000 0.214776 -1.250070 2568 57 -8.7368E+00 9.426771 -0.237380 9.723026 13.682122 -99.000000 51.642497 0.000000 0.045439 0.785224 0.613495 8 2.8823E+05 6.000321 6.223974 14.486936 15.048601 -7.101793 48.983269 0.000008 0.000003 0.436751 -0.716E+01 max increase log_rel_run_E_err -8.2806046205685231 rel_E_err 8.7160950129777832D-12 check gamma integral -1.7007717059588933E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1236 2521 retry: logT < hydro_mtx_min_allowed_logT 1234 2524 retry: logT < hydro_mtx_min_allowed_logT 1260 2527 2530 9.424975 2.727E+05 -13.078254 14.437986 51.642497 0.000000 0.000000 0.000000 0.214776 -1.256511 2568 60 -8.8480E+00 9.424975 -0.237839 9.702724 13.669082 -99.000000 51.642497 0.000000 0.045429 0.785224 0.613257 8 2.8823E+05 5.994412 6.222073 14.437978 14.979091 -7.098950 48.983269 0.000008 0.000003 0.436700 -0.723E+01 max increase log_rel_run_E_err -8.2732373789656926 rel_E_err 8.7429239161282092D-12 check gamma integral -1.6985852559280333E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1218 2531 retry: logT < hydro_mtx_min_allowed_logT 1213 2533 retry: logT < hydro_mtx_min_allowed_logT 1244 2537 2540 9.423774 2.726E+05 -13.120621 14.405377 51.642497 0.000000 0.000000 0.000000 0.214776 -1.260824 2568 63 -9.1177E+00 9.423774 -0.238144 9.689140 13.660346 -99.000000 51.642497 0.000000 0.045424 0.785224 0.613098 6 2.8823E+05 5.990460 6.220813 14.405368 14.932512 -7.097070 48.983269 0.000008 0.000003 0.436668 -0.728E+01 max increase log_rel_run_E_err -8.2661378942014263 rel_E_err 8.4202934887190641D-12 check gamma integral -1.6969336714502820E-002 retry: logT > hydro_mtx_max_allowed_logT 1314 2544 retry: logT < hydro_mtx_min_allowed_logT 1272 2547 retry: logT < hydro_mtx_min_allowed_logT 1201 2549 2550 9.422410 2.725E+05 -13.162178 14.368464 51.642497 0.000000 0.000000 0.000000 0.214776 -1.265729 2579 66 -9.2290E+00 9.422410 -0.238488 9.673705 13.650409 -99.000000 51.642497 0.000000 0.045418 0.785224 0.612916 6 2.8823E+05 5.985971 6.219388 14.368455 14.879518 -7.094946 48.983269 0.000008 0.000003 0.436635 -0.734E+01 max increase log_rel_run_E_err -8.2591809313896256 rel_E_err 8.6684991732214320D-12 save photos/x550 for model 2550 check gamma integral -1.6948724031825065E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1220 2553 2560 9.421212 2.724E+05 -12.840760 14.336140 51.642497 0.000000 0.000000 0.000000 0.214776 -1.270043 2580 67 -8.8965E+00 9.421212 -0.238788 9.660139 13.641665 -99.000000 51.642497 0.000000 0.045414 0.785224 0.612755 8 2.8823E+05 5.982026 6.218144 14.336131 14.832878 -7.093098 48.983269 0.000008 0.000003 0.436608 -0.739E+01 max increase log_rel_run_E_err -8.2521381115110657 rel_E_err 8.7812209582272044D-12 check gamma integral -1.6928973859389684E-002 retry: logT < hydro_mtx_min_allowed_logT 1185 2561 retry: logT < hydro_mtx_min_allowed_logT 1246 2565 retry: logT > hydro_mtx_max_allowed_logT 1172 2568 retry: logT < hydro_mtx_min_allowed_logT 1198 2570 2570 9.419792 2.723E+05 -13.127690 14.297983 51.642497 0.000000 0.000000 0.000000 0.214776 -1.275160 2580 71 -9.3089E+00 9.419792 -0.239142 9.644064 13.631291 -99.000000 51.642497 0.000000 0.045409 0.785224 0.612564 5 2.8823E+05 5.977352 6.216677 14.297973 14.777539 -7.090944 48.983269 0.000007 0.000003 0.436578 -0.745E+01 retry log_rel_run_E_err -8.2453679837588787 rel_E_err 9.2100531746916237D-12 check gamma integral -1.6903584027383105E-002 retry: logT > hydro_mtx_max_allowed_logT 1162 2575 retry: logT < hydro_mtx_min_allowed_logT 1160 2578 2580 9.418621 2.722E+05 -13.395289 14.266607 51.642497 0.000000 0.000000 0.000000 0.214776 -1.279387 2580 73 -9.1191E+00 9.418621 -0.239432 9.630798 13.622720 -99.000000 51.642497 0.000000 0.045406 0.785224 0.612405 6 2.8823E+05 5.973496 6.215472 14.266597 14.731806 -7.089175 48.983269 0.000007 0.000002 0.436555 -0.749E+01 max increase log_rel_run_E_err -8.2386908717899079 rel_E_err 8.5525909208262382D-12 check gamma integral -1.6880995439198361E-002 retry: logT > hydro_mtx_max_allowed_logT 1151 2582 retry: logT > hydro_mtx_max_allowed_logT 1149 2585 retry: logT < hydro_mtx_min_allowed_logT 1143 2590 2590 9.417487 2.721E+05 -13.113872 14.236320 51.642497 0.000000 0.000000 0.000000 0.214776 -1.283484 2580 76 -9.2304E+00 9.417487 -0.239711 9.617950 13.614410 -99.000000 51.642497 0.000000 0.045403 0.785224 0.612251 5 2.8823E+05 5.969761 6.214308 14.236309 14.687463 -7.087470 48.983269 0.000007 0.000002 0.436534 -0.754E+01 retry log_rel_run_E_err -8.2320949359040139 rel_E_err 8.5742234884487049D-12 check gamma integral -1.6857701129046623E-002 retry: logT > hydro_mtx_max_allowed_logT 1140 2592 retry: logT < hydro_mtx_min_allowed_logT 1134 2596 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.416468 2.720E+05 -13.208117 14.209178 51.642497 0.000000 0.000000 0.000000 0.214776 -1.287169 2580 78 -9.0406E+00 9.416468 -0.239961 9.606403 13.606933 -99.000000 51.642497 0.000000 0.045400 0.785224 0.612113 8 2.8823E+05 5.966404 6.213269 14.209167 14.647563 -7.085946 48.983269 0.000007 0.000002 0.436517 -0.758E+01 max increase log_rel_run_E_err -8.2256704789833961 rel_E_err 8.7146930655422047D-12 save LOGS/profile29.data for model 2600 save photos/x600 for model 2600 check gamma integral -1.6835571071523638E-002 retry: logT < hydro_mtx_min_allowed_logT 1210 2601 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1122 2605 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1121 2608 2610 9.415354 2.719E+05 -13.231894 14.179578 51.642497 0.000000 0.000000 0.000000 0.214776 -1.291204 2580 81 -9.1519E+00 9.415354 -0.240234 9.593773 13.598745 -99.000000 51.642497 0.000000 0.045398 0.785224 0.611961 6 2.8823E+05 5.962732 6.212136 14.179567 14.603872 -7.084290 48.983269 0.000007 0.000002 0.436499 -0.763E+01 max increase log_rel_run_E_err -8.2194152605903419 rel_E_err 8.3881031446690681D-12 check gamma integral -1.6810061738333965E-002 retry: logT > hydro_mtx_max_allowed_logT 1114 2613 retry: logT > hydro_mtx_max_allowed_logT 1110 2615 retry: logT > hydro_mtx_max_allowed_logT 1107 2618 2620 9.414330 2.719E+05 -13.740015 14.152462 51.642497 0.000000 0.000000 0.000000 0.214776 -1.294914 2580 84 -9.2632E+00 9.414330 -0.240483 9.582170 13.591215 -99.000000 51.642497 0.000000 0.045396 0.785224 0.611821 8 2.8823E+05 5.959359 6.211098 14.152450 14.563687 -7.082778 48.983269 0.000007 0.000002 0.436484 -0.767E+01 max increase log_rel_run_E_err -8.2132727329165043 rel_E_err 8.5506697335850412D-12 check gamma integral -1.6785420751327138E-002 retry: logT < hydro_mtx_min_allowed_logT 1102 2621 retry: logT < hydro_mtx_min_allowed_logT 1104 2624 2630 9.413521 2.718E+05 -13.353448 14.131100 51.642497 0.000000 0.000000 0.000000 0.214776 -1.297846 2585 86 -9.0734E+00 9.413521 -0.240679 9.573006 13.585263 -99.000000 51.642497 0.000000 0.045395 0.785224 0.611710 8 2.8823E+05 5.956695 6.210280 14.131088 14.531922 -7.081589 48.983269 0.000007 0.000002 0.436473 -0.770E+01 max increase log_rel_run_E_err -8.2071880731537199 rel_E_err 8.8507916104415334D-12 Layers above q= 0.99999905669123323 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.3378906250000 max vel inside fraction of cutoff 1557.2014097115987 max c/cs inside fraction of cutoff 0.54608045306351516 average v/vesc outside cutoff -4.7085966762833775E-002 Kinetic plus potential energy outside cutoff -3.0152408068217941E+045 mass inside cutoff 1123 51.642448211943652 relax counter 0 log max v [km/s]= 3.9358718191679190 check gamma integral -1.6765141423147091E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1097 2631 retry: logT < hydro_mtx_min_allowed_logT 1120 2633 retry: logT > hydro_mtx_max_allowed_logT 1088 2638 2640 9.412796 2.717E+05 -13.541113 14.111984 51.642497 0.000000 0.000000 0.000000 0.214776 -1.300477 2585 89 -9.3431E+00 9.412796 -0.240854 9.564790 13.579921 -99.000000 51.642497 0.000000 0.045393 0.785224 0.611611 8 2.8823E+05 5.954306 6.209547 14.111972 14.503416 -7.080528 48.983269 0.000007 0.000002 0.436463 -0.773E+01 max increase log_rel_run_E_err -8.2012437464930183 rel_E_err 8.4102150135082645D-12 k, q, energy_removed_layers before adjustment is 1137 0.99999883416732915 2.0589245807259362E+046 k, q, energy_removed_layers after adjustment is 1346 0.99998499214324943 2.0604703242648435E+047 Layers above q= 0.99998499214324943 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.4726562500000 max vel inside fraction of cutoff 1566.9598535292848 max c/cs inside fraction of cutoff 0.55010563371589172 average v/vesc outside cutoff 0.72992517010401192 Kinetic plus potential energy outside cutoff 2.0604703242648435E+047 mass inside cutoff 1346 51.641721883567627 relax counter 0 log max v [km/s]= 3.9386220943205146 check gamma integral -1.6746341172745177E-002 retry: logT < hydro_mtx_min_allowed_logT 1118 2641 retry: logT > hydro_mtx_max_allowed_logT 1080 2647 2650 9.412202 2.717E+05 -13.880831 14.096351 51.642497 0.000000 0.000000 0.000000 0.214776 -1.302634 2585 91 -9.3117E+00 9.412202 -0.240998 9.558058 13.575542 -99.000000 51.642497 0.000000 0.045393 0.785224 0.611529 6 2.8823E+05 5.952348 6.208948 14.096338 14.480046 -7.079660 48.983269 0.000006 0.000002 0.436455 -0.776E+01 max increase log_rel_run_E_err -8.1953153624885449 rel_E_err 8.5670714862273267D-12 save photos/x650 for model 2650 k, q, energy_removed_layers before adjustment is 1148 0.99999866464485276 3.7636071749124807E+046 k, q, energy_removed_layers after adjustment is 1346 0.99998499214324943 2.1659025639796660E+047 Layers above q= 0.99998499214324943 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.5820312500000 max vel inside fraction of cutoff 1574.8955522966583 max c/cs inside fraction of cutoff 0.55338844036305701 average v/vesc outside cutoff 0.74466994426413768 Kinetic plus potential energy outside cutoff 2.1659025639796660E+047 mass inside cutoff 1346 51.641721883567627 relax counter 0 log max v [km/s]= 3.9532449676665369 check gamma integral -1.6730501592760575E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1072 2652 retry: logT > hydro_mtx_max_allowed_logT 1068 2656 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1064 2660 2660 9.411388 2.716E+05 -13.818194 14.074958 51.642497 0.000000 0.000000 0.000000 0.214776 -1.305593 2585 94 -9.4230E+00 9.411388 -0.241194 9.548829 13.569533 -99.000000 51.642497 0.000000 0.045391 0.785224 0.611417 5 2.8823E+05 5.949665 6.208130 14.074945 14.447986 -7.078477 48.983269 0.000006 0.000002 0.436445 -0.779E+01 retry log_rel_run_E_err -8.1895200195701570 rel_E_err 8.3160589076847484D-12 k, q, energy_removed_layers before adjustment is 1160 0.99999845290518163 5.8684017126493796E+046 k, q, energy_removed_layers after adjustment is 1347 0.99998482607382977 2.3063153997634824E+047 Layers above q= 0.99998482607382977 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.7324218750000 max vel inside fraction of cutoff 1585.6874653507466 max c/cs inside fraction of cutoff 0.55786673830186473 average v/vesc outside cutoff 0.76242342942119523 Kinetic plus potential energy outside cutoff 2.3063153997634824E+047 mass inside cutoff 1347 51.641713307328125 relax counter 0 log max v [km/s]= 3.9676985140279171 check gamma integral -1.6708145556686590E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1062 2664 retry: logT > hydro_mtx_max_allowed_logT 1056 2668 retry: logT < hydro_mtx_min_allowed_logT 1080 2670 2670 9.410546 2.715E+05 -13.734846 14.052893 51.642497 0.000000 0.000000 0.000000 0.214776 -1.308653 2585 97 -9.5342E+00 9.410546 -0.241395 9.539289 13.563317 -99.000000 51.642497 0.000000 0.045390 0.785224 0.611301 5 2.8823E+05 5.946891 6.207285 14.052880 14.414820 -7.077259 48.983269 0.000006 0.000002 0.436436 -0.782E+01 retry log_rel_run_E_err -8.1838543977420475 rel_E_err 8.4786744103903562D-12 k, q, energy_removed_layers before adjustment is 1169 0.99999827041991862 7.7851073851604510E+046 k, q, energy_removed_layers after adjustment is 1348 0.99998467696288962 2.4465029582511857E+047 Layers above q= 0.99998467696288962 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.8906250000000 max vel inside fraction of cutoff 1596.7395448860168 max c/cs inside fraction of cutoff 0.56246966981000579 average v/vesc outside cutoff 0.78076824027418679 Kinetic plus potential energy outside cutoff 2.4465029582511857E+047 mass inside cutoff 1348 51.641705606866857 relax counter 0 log max v [km/s]= 3.9844292084599462 check gamma integral -1.6684257861082380E-002 retry: logT > hydro_mtx_max_allowed_logT 1051 2673 retry: logT < hydro_mtx_min_allowed_logT 1049 2676 2680 9.409979 2.715E+05 -13.582059 14.038036 51.642497 0.000000 0.000000 0.000000 0.214776 -1.310719 2585 99 -9.3445E+00 9.409979 -0.241531 9.532854 13.559121 -99.000000 51.642497 0.000000 0.045390 0.785224 0.611223 6 2.8823E+05 5.945019 6.206716 14.038022 14.392431 -7.076440 48.983269 0.000006 0.000002 0.436430 -0.785E+01 max increase log_rel_run_E_err -8.1782537343292621 rel_E_err 8.6452031555078295D-12 k, q, energy_removed_layers before adjustment is 1175 0.99999811809406935 9.1325377539559288E+046 k, q, energy_removed_layers after adjustment is 1348 0.99998467696288962 2.5384236994971313E+047 Layers above q= 0.99998467696288962 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8314.9960937500000 max vel inside fraction of cutoff 1604.1392340527118 max c/cs inside fraction of cutoff 0.56556085016377444 average v/vesc outside cutoff 0.79334342579769357 Kinetic plus potential energy outside cutoff 2.5384236994971313E+047 mass inside cutoff 1348 51.641705606866857 relax counter 0 log max v [km/s]= 3.9935761797070053 check gamma integral -1.6667693249966413E-002 retry: logT < hydro_mtx_min_allowed_logT 1046 2682 retry: logT > hydro_mtx_max_allowed_logT 1038 2686 retry: logT > hydro_mtx_max_allowed_logT 1033 2690 2690 9.409212 2.714E+05 -13.956825 14.018008 51.642497 0.000000 0.000000 0.000000 0.214776 -1.313510 2585 102 -9.4558E+00 9.409212 -0.241714 9.524164 13.553450 -99.000000 51.642497 0.000000 0.045389 0.785224 0.611117 5 2.8823E+05 5.942492 6.205948 14.017994 14.362179 -7.075337 48.983269 0.000006 0.000002 0.436422 -0.788E+01 retry log_rel_run_E_err -8.1726801035806638 rel_E_err 8.6301363586452294D-12 k, q, energy_removed_layers before adjustment is 1185 0.99999790592618742 1.0881755149721000E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998452647912794 2.6593003420402086E+047 Layers above q= 0.99998452647912794 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.1367187500000 max vel inside fraction of cutoff 1614.0573883927871 max c/cs inside fraction of cutoff 0.56971624264232767 average v/vesc outside cutoff 0.80869716166421524 Kinetic plus potential energy outside cutoff 2.6593003420402086E+047 mass inside cutoff 1349 51.641697835509660 relax counter 0 log max v [km/s]= 4.0101091970411993 check gamma integral -1.6644748479655684E-002 retry: logT > hydro_mtx_max_allowed_logT 1031 2692 retry: logT > hydro_mtx_max_allowed_logT 1028 2695 retry: logT > hydro_mtx_max_allowed_logT 1024 2699 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.408693 2.714E+05 -13.701158 14.004467 51.642497 0.000000 0.000000 0.000000 0.214776 -1.315401 2585 105 -9.5670E+00 9.408693 -0.241838 9.518279 13.549606 -99.000000 51.642497 0.000000 0.045388 0.785224 0.611045 5 2.8823E+05 5.940780 6.205428 14.004453 14.341679 -7.074592 48.983269 0.000006 0.000002 0.436416 -0.790E+01 max increase log_rel_run_E_err -8.1672116075761618 rel_E_err 8.6487730934465355D-12 save LOGS/profile30.data for model 2700 save photos/x700 for model 2700 k, q, energy_removed_layers before adjustment is 1189 0.99999777338301254 1.2009255609549156E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998452647912794 2.7391521650928021E+047 Layers above q= 0.99998452647912794 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.2324218750000 max vel inside fraction of cutoff 1620.7290129143632 max c/cs inside fraction of cutoff 0.57251916130182923 average v/vesc outside cutoff 0.81953300759525083 Kinetic plus potential energy outside cutoff 2.7391521650928021E+047 mass inside cutoff 1349 51.641697835509660 relax counter 0 log max v [km/s]= 4.0190411934861734 check gamma integral -1.6628832399931081E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1066 2702 retry: logT > hydro_mtx_max_allowed_logT 1016 2707 2710 9.408158 2.714E+05 -13.952314 13.990551 51.642497 0.000000 0.000000 0.000000 0.214776 -1.317348 2585 107 -9.3773E+00 9.408158 -0.241965 9.512223 13.545649 -99.000000 51.642497 0.000000 0.045387 0.785224 0.610972 7 2.8823E+05 5.939018 6.204895 13.990537 14.320573 -7.073827 48.983269 0.000006 0.000002 0.436411 -0.792E+01 max increase log_rel_run_E_err -8.1618279231084685 rel_E_err 8.5993572835550245D-12 k, q, energy_removed_layers before adjustment is 1194 0.99999760830849393 1.3238979424721968E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998437469575685 2.8197040066876499E+047 Layers above q= 0.99998437469575685 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.3320312500000 max vel inside fraction of cutoff 1624.7561022848915 max c/cs inside fraction of cutoff 0.57377892179525170 average v/vesc outside cutoff 0.82918025279714036 Kinetic plus potential energy outside cutoff 2.8197040066876499E+047 mass inside cutoff 1350 51.641689997037382 relax counter 0 log max v [km/s]= 4.0315185031400764 check gamma integral -1.6612134544970854E-002 retry: logT > hydro_mtx_max_allowed_logT 1012 2711 retry: logT > hydro_mtx_max_allowed_logT 1011 2717 retry: logT < hydro_mtx_min_allowed_logT 1002 2720 2720 9.407428 2.713E+05 -13.887014 13.971564 51.642497 0.000000 0.000000 0.000000 0.214776 -1.320011 2585 110 -9.4886E+00 9.407428 -0.242139 9.503945 13.540236 -99.000000 51.642497 0.000000 0.045387 0.785224 0.610870 5 2.8823E+05 5.936610 6.204164 13.971549 14.291711 -7.072784 48.983269 0.000006 0.000002 0.436405 -0.795E+01 retry log_rel_run_E_err -8.1564744201609116 rel_E_err 8.7461617165646421D-12 k, q, energy_removed_layers before adjustment is 1200 0.99999740944694226 1.4803262263978921E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998437469575685 2.9271942162498048E+047 Layers above q= 0.99998437469575685 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.4628906250000 max vel inside fraction of cutoff 1634.0024792580116 max c/cs inside fraction of cutoff 0.57767785049817322 average v/vesc outside cutoff 0.84366937581266144 Kinetic plus potential energy outside cutoff 2.9271942162498048E+047 mass inside cutoff 1350 51.641689997037382 relax counter 0 log max v [km/s]= 4.0457478670764404 check gamma integral -1.6588788446057323E-002 retry: logT > hydro_mtx_max_allowed_logT 999 2723 retry: logT > hydro_mtx_max_allowed_logT 995 2727 retry: logT < hydro_mtx_min_allowed_logT 1094 2730 2730 9.406785 2.712E+05 -14.012052 13.954882 51.642497 0.000000 0.000000 0.000000 0.214776 -1.322356 2585 113 -9.5998E+00 9.406785 -0.242291 9.496661 13.535469 -99.000000 51.642497 0.000000 0.045386 0.785224 0.610781 5 2.8823E+05 5.934491 6.203525 13.954867 14.266294 -7.071868 48.983269 0.000006 0.000002 0.436399 -0.798E+01 retry log_rel_run_E_err -8.1512452821193282 rel_E_err 8.5719024937040461D-12 k, q, energy_removed_layers before adjustment is 1207 0.99999722784201583 1.6048917429730085E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998422162377854 3.0193913058310797E+047 Layers above q= 0.99998422162377854 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.5820312500000 max vel inside fraction of cutoff 1642.0825533416651 max c/cs inside fraction of cutoff 0.58109497801769938 average v/vesc outside cutoff 0.85444409132348109 Kinetic plus potential energy outside cutoff 3.0193913058310797E+047 mass inside cutoff 1351 51.641682092018215 relax counter 0 log max v [km/s]= 4.0581536957849833 check gamma integral -1.6567740818941867E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2734 retry: logT < hydro_mtx_min_allowed_logT 984 2739 2740 9.406127 2.712E+05 -13.973371 13.937809 51.642497 0.000000 0.000000 0.000000 0.214776 -1.324761 2585 115 -9.4101E+00 9.406127 -0.242447 9.489192 13.530578 -99.000000 51.642497 0.000000 0.045386 0.785224 0.610690 5 2.8823E+05 5.932318 6.202871 13.937793 14.240222 -7.070934 48.983269 0.000006 0.000002 0.436394 -0.800E+01 max increase log_rel_run_E_err -8.1459999147386011 rel_E_err 8.6417973940610184D-12 k, q, energy_removed_layers before adjustment is 1214 0.99999702427670067 1.7384073855767646E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998422162377854 3.1116934053407361E+047 Layers above q= 0.99998422162377854 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.6992187500000 max vel inside fraction of cutoff 1650.3101801733487 max c/cs inside fraction of cutoff 0.58458420198504080 average v/vesc outside cutoff 0.86681700821150187 Kinetic plus potential energy outside cutoff 3.1116934053407361E+047 mass inside cutoff 1351 51.641682092018215 relax counter 0 log max v [km/s]= 4.0747919793048997 check gamma integral -1.6545672491189933E-002 retry: logT > hydro_mtx_max_allowed_logT 981 2742 retry: logT > hydro_mtx_max_allowed_logT 978 2745 retry: logT > hydro_mtx_max_allowed_logT 973 2750 2750 9.405493 2.711E+05 -13.733009 13.921430 51.642497 0.000000 0.000000 0.000000 0.214776 -1.327074 2585 118 -9.5214E+00 9.405493 -0.242596 9.482016 13.525875 -99.000000 51.642497 0.000000 0.045385 0.785224 0.610602 5 2.8823E+05 5.930230 6.202243 13.921414 14.215157 -7.070039 48.983269 0.000006 0.000002 0.436388 -0.803E+01 retry log_rel_run_E_err -8.1409139162468449 rel_E_err 8.4836225890585783D-12 save photos/x750 for model 2750 k, q, energy_removed_layers before adjustment is 1218 0.99999687516383484 1.8467497551502926E+047 k, q, energy_removed_layers after adjustment is 1352 0.99998407233286613 3.1983442286888149E+047 Layers above q= 0.99998407233286613 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.8164062500000 max vel inside fraction of cutoff 1658.1634137957519 max c/cs inside fraction of cutoff 0.58792381808832894 average v/vesc outside cutoff 0.87691113668291698 Kinetic plus potential energy outside cutoff 3.1983442286888149E+047 mass inside cutoff 1352 51.641674382262728 relax counter 0 log max v [km/s]= 4.0859232873124052 check gamma integral -1.6523999027232360E-002 retry: logT < hydro_mtx_min_allowed_logT 970 2753 retry: logT < hydro_mtx_min_allowed_logT 1038 2755 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 964 2759 2760 9.404998 2.711E+05 -13.809914 13.908624 51.642497 0.000000 0.000000 0.000000 0.214776 -1.328885 2585 121 -9.6326E+00 9.404998 -0.242713 9.476397 13.522191 -99.000000 51.642497 0.000000 0.045385 0.785224 0.610533 5 2.8823E+05 5.928595 6.201750 13.908608 14.195521 -7.069340 48.983269 0.000006 0.000002 0.436385 -0.805E+01 max increase log_rel_run_E_err -8.1358719948897313 rel_E_err 8.3889722307584308D-12 k, q, energy_removed_layers before adjustment is 1222 0.99999671798045697 1.9504695884778651E+047 k, q, energy_removed_layers after adjustment is 1353 0.99998392184060403 3.2648315011386493E+047 Layers above q= 0.99998392184060403 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.9042968750000 max vel inside fraction of cutoff 1664.2777297916514 max c/cs inside fraction of cutoff 0.59053015113707208 average v/vesc outside cutoff 0.88421206592676949 Kinetic plus potential energy outside cutoff 3.2648315011386493E+047 mass inside cutoff 1353 51.641666610466544 relax counter 0 log max v [km/s]= 4.0911264102234419 check gamma integral -1.6506708931757281E-002 retry: logT > hydro_mtx_max_allowed_logT 959 2764 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1000 2767 2770 9.404462 2.711E+05 -14.035512 13.894793 51.642497 0.000000 0.000000 0.000000 0.214776 -1.330845 2585 123 -9.4429E+00 9.404462 -0.242839 9.470321 13.518204 -99.000000 51.642497 0.000000 0.045384 0.785224 0.610458 6 2.8823E+05 5.926826 6.201220 13.894777 14.174279 -7.068585 48.983269 0.000006 0.000002 0.436381 -0.807E+01 max increase log_rel_run_E_err -8.1309452336935131 rel_E_err 8.1047012151965933D-12 k, q, energy_removed_layers before adjustment is 1225 0.99999658049443818 2.0378326908400825E+047 k, q, energy_removed_layers after adjustment is 1358 0.99998277305435468 3.3409990395514859E+047 Layers above q= 0.99998277305435468 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.0019531250000 max vel inside fraction of cutoff 1670.8550679509174 max c/cs inside fraction of cutoff 0.59333999846877672 average v/vesc outside cutoff 0.88699743863272362 Kinetic plus potential energy outside cutoff 3.3409990395514859E+047 mass inside cutoff 1358 51.641607284276198 relax counter 0 log max v [km/s]= 4.1089016975237405 check gamma integral -1.6487692921114919E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 951 2772 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 949 2775 retry: logT < hydro_mtx_min_allowed_logT 946 2779 2780 9.403910 2.710E+05 -14.182241 13.880583 51.642497 0.000000 0.000000 0.000000 0.214776 -1.332863 2585 126 -9.5542E+00 9.403910 -0.242969 9.464068 13.514099 -99.000000 51.642497 0.000000 0.045384 0.785224 0.610382 5 2.8823E+05 5.925007 6.200676 13.880566 14.152414 -7.067810 48.983269 0.000006 0.000002 0.436377 -0.809E+01 max increase log_rel_run_E_err -8.1260054412514808 rel_E_err 8.6713881412439338D-12 k, q, energy_removed_layers before adjustment is 1229 0.99999644795126319 2.1268765277846206E+047 k, q, energy_removed_layers after adjustment is 1359 0.99998248382988109 3.4138899816227536E+047 Layers above q= 0.99998248382988109 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.0996093750000 max vel inside fraction of cutoff 1677.5854358154202 max c/cs inside fraction of cutoff 0.59622184400483813 average v/vesc outside cutoff 0.88835299684883262 Kinetic plus potential energy outside cutoff 3.4138899816227536E+047 mass inside cutoff 1359 51.641592348002199 relax counter 0 log max v [km/s]= 4.1219876764810275 check gamma integral -1.6467782741079656E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 942 2784 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1008 2786 retry: logT > hydro_mtx_max_allowed_logT 936 2790 2790 9.403339 2.710E+05 -14.129515 13.865899 51.642497 0.000000 0.000000 0.000000 0.214776 -1.334951 2585 129 -9.6654E+00 9.403339 -0.243103 9.457599 13.509849 -99.000000 51.642497 0.000000 0.045383 0.785224 0.610302 5 2.8823E+05 5.923124 6.200112 13.865882 14.129778 -7.067012 48.983269 0.000006 0.000002 0.436373 -0.812E+01 retry log_rel_run_E_err -8.1211399837799405 rel_E_err 8.5592453215909048D-12 k, q, energy_removed_layers before adjustment is 1234 0.99999628415615538 2.2210768872032980E+047 k, q, energy_removed_layers after adjustment is 1359 0.99998248382988109 3.4879416389971290E+047 Layers above q= 0.99998248382988109 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.1992187500000 max vel inside fraction of cutoff 1684.5105985577000 max c/cs inside fraction of cutoff 0.59919412998225319 average v/vesc outside cutoff 0.89749117026975234 Kinetic plus potential energy outside cutoff 3.4879416389971290E+047 mass inside cutoff 1359 51.641592348002199 relax counter 0 log max v [km/s]= 4.1309558029251896 check gamma integral -1.6446809588259510E-002 retry: logT > hydro_mtx_max_allowed_logT 930 2795 retry: logT < hydro_mtx_min_allowed_logT 1004 2797 retry: logT < hydro_mtx_min_allowed_logT 926 2800 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 9.402827 2.709E+05 -14.017671 13.852735 51.642497 0.000000 0.000000 0.000000 0.214776 -1.336827 2585 132 -9.7767E+00 9.402827 -0.243223 9.451791 13.506031 -99.000000 51.642497 0.000000 0.045383 0.785224 0.610231 5 2.8823E+05 5.921433 6.199607 13.852718 14.109451 -7.066297 48.983269 0.000006 0.000002 0.436370 -0.814E+01 retry log_rel_run_E_err -8.1163170104438489 rel_E_err 8.6604405845466148D-12 save LOGS/profile31.data for model 2800 save photos/x800 for model 2800 k, q, energy_removed_layers before adjustment is 1238 0.99999612603693422 2.3149509297383227E+047 k, q, energy_removed_layers after adjustment is 1360 0.99998230954018363 3.5532010188254403E+047 Layers above q= 0.99998230954018363 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.2890625000000 max vel inside fraction of cutoff 1690.6938479943606 max c/cs inside fraction of cutoff 0.60185401657333348 average v/vesc outside cutoff 0.90370590004966456 Kinetic plus potential energy outside cutoff 3.5532010188254403E+047 mass inside cutoff 1360 51.641583347247042 relax counter 0 log max v [km/s]= 4.1461964167416197 check gamma integral -1.6427662829793459E-002 retry: logT > hydro_mtx_max_allowed_logT 923 2804 retry: logT < hydro_mtx_min_allowed_logT 920 2807 2810 9.402437 2.709E+05 -14.015844 13.842734 51.642497 0.000000 0.000000 0.000000 0.214776 -1.338255 2585 134 -9.5870E+00 9.402437 -0.243314 9.447374 13.503126 -99.000000 51.642497 0.000000 0.045383 0.785224 0.610176 8 2.8823E+05 5.920147 6.199224 13.842717 14.093986 -7.065753 48.983269 0.000006 0.000002 0.436367 -0.815E+01 max increase log_rel_run_E_err -8.1115434064773542 rel_E_err 8.6542516038149367D-12 k, q, energy_removed_layers before adjustment is 1240 0.99999601003825633 2.3852530784460030E+047 k, q, energy_removed_layers after adjustment is 1360 0.99998230954018363 3.6020681473011488E+047 Layers above q= 0.99998230954018363 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.3554687500000 max vel inside fraction of cutoff 1695.3763042456574 max c/cs inside fraction of cutoff 0.60387207482590144 average v/vesc outside cutoff 0.90970526612023073 Kinetic plus potential energy outside cutoff 3.6020681473011488E+047 mass inside cutoff 1360 51.641583347247042 relax counter 0 log max v [km/s]= 4.1577082352611203 check gamma integral -1.6412896845583339E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 915 2812 retry: logT < hydro_mtx_min_allowed_logT 913 2815 retry: logT < hydro_mtx_min_allowed_logT 909 2819 2820 9.402036 2.709E+05 -13.965613 13.832465 51.642497 0.000000 0.000000 0.000000 0.214776 -1.339722 2585 137 -9.6982E+00 9.402036 -0.243408 9.442834 13.500139 -99.000000 51.642497 0.000000 0.045383 0.785224 0.610120 5 2.8823E+05 5.918826 6.198830 13.832447 14.078084 -7.065196 48.983269 0.000006 0.000002 0.436365 -0.817E+01 max increase log_rel_run_E_err -8.1068333960143413 rel_E_err 8.1872407265446602D-12 k, q, energy_removed_layers before adjustment is 1242 0.99999591460796866 2.4369317549526008E+047 k, q, energy_removed_layers after adjustment is 1361 0.99998213380917078 3.6515771169658892E+047 Layers above q= 0.99998213380917078 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.4257812500000 max vel inside fraction of cutoff 1700.1705234753867 max c/cs inside fraction of cutoff 0.60594172461457052 average v/vesc outside cutoff 0.91389182475355102 Kinetic plus potential energy outside cutoff 3.6515771169658892E+047 mass inside cutoff 1361 51.641574272058747 relax counter 0 log max v [km/s]= 4.1686046881053640 check gamma integral -1.6397536019679380E-002 retry: logT < hydro_mtx_min_allowed_logT 905 2823 retry: logT > hydro_mtx_max_allowed_logT 900 2828 2830 9.401566 2.708E+05 -14.048808 13.820419 51.642497 0.000000 0.000000 0.000000 0.214776 -1.341446 2585 139 -9.5085E+00 9.401566 -0.243518 9.437502 13.496629 -99.000000 51.642497 0.000000 0.045382 0.785224 0.610055 6 2.8823E+05 5.917273 6.198368 13.820401 14.059406 -7.064543 48.983269 0.000006 0.000002 0.436362 -0.819E+01 max increase log_rel_run_E_err -8.1021892867063308 rel_E_err 8.5192685357355525D-12 k, q, energy_removed_layers before adjustment is 1245 0.99999580405325217 2.5029984544576712E+047 k, q, energy_removed_layers after adjustment is 1361 0.99998213380917078 3.7089217809568365E+047 Layers above q= 0.99998213380917078 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.5078125000000 max vel inside fraction of cutoff 1705.7761586270519 max c/cs inside fraction of cutoff 0.60836608746299259 average v/vesc outside cutoff 0.92089344034025722 Kinetic plus potential energy outside cutoff 3.7089217809568365E+047 mass inside cutoff 1361 51.641574272058747 relax counter 0 log max v [km/s]= 4.1839094210062227 check gamma integral -1.6379258735368152E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 897 2831 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 894 2835 retry: logT < hydro_mtx_min_allowed_logT 912 2839 2840 9.401117 2.708E+05 -14.123260 13.808941 51.642497 0.000000 0.000000 0.000000 0.214776 -1.343092 2585 142 -9.6198E+00 9.401117 -0.243622 9.432416 13.493279 -99.000000 51.642497 0.000000 0.045382 0.785224 0.609992 5 2.8823E+05 5.915793 6.197927 13.808922 14.041583 -7.063921 48.983269 0.000006 0.000002 0.436359 -0.821E+01 max increase log_rel_run_E_err -8.0975516651923733 rel_E_err 8.3132318506674988D-12 k, q, energy_removed_layers before adjustment is 1248 0.99999569100448416 2.5676474625870420E+047 k, q, energy_removed_layers after adjustment is 1361 0.99998213380917078 3.7626877138251157E+047 Layers above q= 0.99998213380917078 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.5839843750000 max vel inside fraction of cutoff 1711.0998633075862 max c/cs inside fraction of cutoff 0.61067292822297381 average v/vesc outside cutoff 0.92747026522310805 Kinetic plus potential energy outside cutoff 3.7626877138251157E+047 mass inside cutoff 1361 51.641574272058747 relax counter 0 log max v [km/s]= 4.1917230959136731 check gamma integral -1.6361583838203582E-002 retry: logT > hydro_mtx_max_allowed_logT 889 2843 hydro_solver_step returned ierr -1 s% model_number 2847 nz 2585 s% num_retries 143 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 888 2847 2850 9.400590 2.707E+05 -14.093427 13.795461 51.642497 0.000000 0.000000 0.000000 0.214776 -1.345027 2585 144 -9.4300E+00 9.400590 -0.243745 9.426435 13.489338 -99.000000 51.642497 0.000000 0.045382 0.785224 0.609918 6 2.8823E+05 5.914051 6.197409 13.795442 14.020619 -7.063191 48.983269 0.000006 0.000002 0.436357 -0.823E+01 max increase log_rel_run_E_err -8.0930479324499807 rel_E_err 8.5986797833305127D-12 save photos/x850 for model 2850 k, q, energy_removed_layers before adjustment is 1251 0.99999555427116882 2.6444845695706647E+047 k, q, energy_removed_layers after adjustment is 1362 0.99998195666700940 3.8248662249245261E+047 Layers above q= 0.99998195666700940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.6757812500000 max vel inside fraction of cutoff 1717.3296290359790 max c/cs inside fraction of cutoff 0.61337789105070928 average v/vesc outside cutoff 0.93308520857855104 Kinetic plus potential energy outside cutoff 3.8248662249245261E+047 mass inside cutoff 1362 51.641565123995228 relax counter 0 log max v [km/s]= 4.2044151256457916 check gamma integral -1.6340502841296792E-002 retry: logT < hydro_mtx_min_allowed_logT 882 2851 retry: logT < hydro_mtx_min_allowed_logT 880 2853 retry: logT > hydro_mtx_max_allowed_logT 877 2856 retry: logT > hydro_mtx_max_allowed_logT 875 2859 2860 9.400253 2.707E+05 -14.225385 13.786885 51.642497 0.000000 0.000000 0.000000 0.214776 -1.346260 2585 148 -9.8423E+00 9.400253 -0.243823 9.422626 13.486826 -99.000000 51.642497 0.000000 0.045382 0.785224 0.609871 5 2.8823E+05 5.912942 6.197078 13.786866 14.007265 -7.062726 48.983269 0.000006 0.000002 0.436355 -0.824E+01 max increase log_rel_run_E_err -8.0885787948034160 rel_E_err 8.3543543709004343D-12 k, q, energy_removed_layers before adjustment is 1253 0.99999545387745126 2.7000290433202564E+047 k, q, energy_removed_layers after adjustment is 1362 0.99998195666700940 3.8639131811256901E+047 Layers above q= 0.99998195666700940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.7343750000000 max vel inside fraction of cutoff 1721.2810445635023 max c/cs inside fraction of cutoff 0.61509663144949045 average v/vesc outside cutoff 0.93783890130261094 Kinetic plus potential energy outside cutoff 3.8639131811256901E+047 mass inside cutoff 1362 51.641565123995228 relax counter 0 log max v [km/s]= 4.2085283795708364 check gamma integral -1.6326907096824227E-002 retry: logT > hydro_mtx_max_allowed_logT 874 2864 hydro_solver_step returned ierr -1 s% model_number 2864 nz 2585 s% num_retries 149 retry: logT > hydro_mtx_max_allowed_logT 870 2864 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 873 2870 2870 9.399983 2.707E+05 -14.135487 13.779994 51.642497 0.000000 0.000000 0.000000 0.214776 -1.347252 2585 151 -9.9536E+00 9.399983 -0.243886 9.419564 13.484806 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609833 5 2.8823E+05 5.912051 6.196813 13.779975 13.996524 -7.062353 48.983269 0.000006 0.000002 0.436353 -0.825E+01 retry log_rel_run_E_err -8.0841766550523051 rel_E_err 8.1075962309078784D-12 k, q, energy_removed_layers before adjustment is 1254 0.99999538878711913 2.7366608101131813E+047 k, q, energy_removed_layers after adjustment is 1362 0.99998195666700940 3.8949620881577018E+047 Layers above q= 0.99998195666700940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.7792968750000 max vel inside fraction of cutoff 1724.4492679680579 max c/cs inside fraction of cutoff 0.61647643204235125 average v/vesc outside cutoff 0.94162404076681372 Kinetic plus potential energy outside cutoff 3.8949620881577018E+047 mass inside cutoff 1362 51.641565123995228 relax counter 0 log max v [km/s]= 4.2185770722389480 check gamma integral -1.6315879055704256E-002 retry: logT < hydro_mtx_min_allowed_logT 863 2875 retry: logT < hydro_mtx_min_allowed_logT 860 2878 2880 9.399680 2.707E+05 -14.202428 13.772273 51.642497 0.000000 0.000000 0.000000 0.214776 -1.348364 2585 153 -9.7639E+00 9.399680 -0.243957 9.416129 13.482541 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609791 6 2.8823E+05 5.911051 6.196516 13.772254 13.984478 -7.061935 48.983269 0.000005 0.000002 0.436352 -0.826E+01 max increase log_rel_run_E_err -8.0797694547426371 rel_E_err 8.5218688153999474D-12 k, q, energy_removed_layers before adjustment is 1255 0.99999532292738258 2.7748400334072168E+047 k, q, energy_removed_layers after adjustment is 1362 0.99998195666700940 3.9294097225916166E+047 Layers above q= 0.99998195666700940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.8320312500000 max vel inside fraction of cutoff 1727.9921666496477 max c/cs inside fraction of cutoff 0.61802123992045443 average v/vesc outside cutoff 0.94582907583387599 Kinetic plus potential energy outside cutoff 3.9294097225916166E+047 mass inside cutoff 1362 51.641565123995228 relax counter 0 log max v [km/s]= 4.2287652735296017 check gamma integral -1.6303411372397478E-002 retry: logT < hydro_mtx_min_allowed_logT 857 2882 retry: logT < hydro_mtx_min_allowed_logT 854 2887 retry: logT < hydro_mtx_min_allowed_logT 854 2890 2890 9.399346 2.706E+05 -14.336069 13.763758 51.642497 0.000000 0.000000 0.000000 0.214776 -1.349592 2585 156 -9.8751E+00 9.399346 -0.244034 9.412338 13.480039 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609744 5 2.8823E+05 5.909947 6.196189 13.763738 13.971180 -7.061475 48.983269 0.000005 0.000002 0.436350 -0.828E+01 retry log_rel_run_E_err -8.0753921897765757 rel_E_err 8.3223918373785255D-12 k, q, energy_removed_layers before adjustment is 1257 0.99999518879110139 2.8326928245783976E+047 k, q, energy_removed_layers after adjustment is 1363 0.99998177792292919 3.9670554961870360E+047 Layers above q= 0.99998177792292919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.8867187500000 max vel inside fraction of cutoff 1731.8905858520070 max c/cs inside fraction of cutoff 0.61972331199319119 average v/vesc outside cutoff 0.94833214681314404 Kinetic plus potential energy outside cutoff 3.9670554961870360E+047 mass inside cutoff 1363 51.641555893204611 relax counter 0 log max v [km/s]= 4.2388566899159761 check gamma integral -1.6289526093932895E-002 retry: logT < hydro_mtx_min_allowed_logT 860 2894 retry: logT < hydro_mtx_min_allowed_logT 848 2898 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 9.399007 2.706E+05 -14.203214 13.755133 51.642497 0.000000 0.000000 0.000000 0.214776 -1.350837 2585 158 -9.6854E+00 9.399007 -0.244113 9.408496 13.477502 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609697 6 2.8823E+05 5.908828 6.195857 13.755114 13.957698 -7.061009 48.983269 0.000005 0.000002 0.436349 -0.829E+01 max increase log_rel_run_E_err -8.0711065864677778 rel_E_err 8.5969111837962106D-12 save LOGS/profile32.data for model 2900 save photos/x900 for model 2900 k, q, energy_removed_layers before adjustment is 1258 0.99999512370039034 2.8741780133682942E+047 k, q, energy_removed_layers after adjustment is 1363 0.99998177792292919 4.0048164967976387E+047 Layers above q= 0.99998177792292919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.9453125000000 max vel inside fraction of cutoff 1735.8295981444526 max c/cs inside fraction of cutoff 0.62144549732283416 average v/vesc outside cutoff 0.95291591599727243 Kinetic plus potential energy outside cutoff 4.0048164967976387E+047 mass inside cutoff 1363 51.641555893204611 relax counter 0 log max v [km/s]= 4.2469804869889218 check gamma integral -1.6275317964749163E-002 retry: logT < hydro_mtx_min_allowed_logT 842 2903 retry: logT < hydro_mtx_min_allowed_logT 844 2906 retry: logT < hydro_mtx_min_allowed_logT 864 2910 2910 9.398605 2.706E+05 -14.333392 13.744933 51.642497 0.000000 0.000000 0.000000 0.214776 -1.352312 2585 161 -9.7967E+00 9.398605 -0.244206 9.403948 13.474498 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609640 5 2.8823E+05 5.907503 6.195465 13.744913 13.941736 -7.060458 48.983269 0.000005 0.000002 0.436347 -0.831E+01 retry log_rel_run_E_err -8.0668806404791304 rel_E_err 8.5060214568605235D-12 k, q, energy_removed_layers before adjustment is 1259 0.99999505782839881 2.9199542378595725E+047 k, q, energy_removed_layers after adjustment is 1363 0.99998177792292919 4.0489089737381248E+047 Layers above q= 0.99998177792292919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.0136718750000 max vel inside fraction of cutoff 1740.4758370984930 max c/cs inside fraction of cutoff 0.62348000750467791 average v/vesc outside cutoff 0.95827811646769900 Kinetic plus potential energy outside cutoff 4.0489089737381248E+047 mass inside cutoff 1363 51.641555893204611 relax counter 0 log max v [km/s]= 4.2562422188232070 check gamma integral -1.6258325337843715E-002 retry: logT < hydro_mtx_min_allowed_logT 833 2915 retry: logT < hydro_mtx_min_allowed_logT 830 2918 2920 9.398167 2.705E+05 -14.307207 13.733798 51.642497 0.000000 0.000000 0.000000 0.214776 -1.353924 2585 163 -9.6069E+00 9.398167 -0.244308 9.398977 13.471213 -99.000000 51.642497 0.000000 0.045381 0.785224 0.609579 6 2.8823E+05 5.906056 6.195037 13.733778 13.924289 -7.059858 48.983269 0.000005 0.000002 0.436345 -0.833E+01 max increase log_rel_run_E_err -8.0626900228369838 rel_E_err 8.2791837483563695D-12 k, q, energy_removed_layers before adjustment is 1261 0.99999492370475140 2.9841430096614874E+047 k, q, energy_removed_layers after adjustment is 1363 0.99998177792292919 4.0963592580643955E+047 Layers above q= 0.99998177792292919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.0878906250000 max vel inside fraction of cutoff 1745.5330029497572 max c/cs inside fraction of cutoff 0.62569829135147548 average v/vesc outside cutoff 0.96406109875258672 Kinetic plus potential energy outside cutoff 4.0963592580643955E+047 mass inside cutoff 1363 51.641555893204611 relax counter 0 log max v [km/s]= 4.2676775590966320 check gamma integral -1.6239539710099483E-002 retry: logT < hydro_mtx_min_allowed_logT 846 2922 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 825 2925 retry: logT < hydro_mtx_min_allowed_logT 823 2929 2930 9.397775 2.705E+05 -14.135592 13.723850 51.642497 0.000000 0.000000 0.000000 0.214776 -1.355366 2585 166 -9.7182E+00 9.397775 -0.244398 9.394532 13.468274 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609524 5 2.8823E+05 5.904761 6.194653 13.723830 13.908681 -7.059321 48.983269 0.000005 0.000002 0.436343 -0.834E+01 max increase log_rel_run_E_err -8.0585496817548119 rel_E_err 8.5221867291065799D-12 k, q, energy_removed_layers before adjustment is 1262 0.99999485854387216 3.0258288992484619E+047 k, q, energy_removed_layers after adjustment is 1364 0.99998159796736652 4.1383287116418546E+047 Layers above q= 0.99998159796736652 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.1542968750000 max vel inside fraction of cutoff 1750.0382774284483 max c/cs inside fraction of cutoff 0.62767785160165290 average v/vesc outside cutoff 0.96699953855527587 Kinetic plus potential energy outside cutoff 4.1383287116418546E+047 mass inside cutoff 1364 51.641546599850024 relax counter 0 log max v [km/s]= 4.2766867837802005 check gamma integral -1.6222547125448104E-002 retry: logT < hydro_mtx_min_allowed_logT 820 2933 retry: logT < hydro_mtx_min_allowed_logT 816 2936 retry: logT < hydro_mtx_min_allowed_logT 815 2939 2940 9.397423 2.705E+05 -14.245770 13.714935 51.642497 0.000000 0.000000 0.000000 0.214776 -1.356659 2585 169 -9.8295E+00 9.397423 -0.244480 9.390544 13.465637 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609474 5 2.8823E+05 5.903600 6.194307 13.714915 13.894680 -7.058840 48.983269 0.000005 0.000002 0.436342 -0.836E+01 max increase log_rel_run_E_err -8.0544581075460755 rel_E_err 8.3736183524609502D-12 k, q, energy_removed_layers before adjustment is 1264 0.99999472600645933 3.0797692927851608E+047 k, q, energy_removed_layers after adjustment is 1364 0.99998159796736652 4.1754756422471935E+047 Layers above q= 0.99998159796736652 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.2128906250000 max vel inside fraction of cutoff 1754.0650204855158 max c/cs inside fraction of cutoff 0.62944983878181748 average v/vesc outside cutoff 0.97150596858338722 Kinetic plus potential energy outside cutoff 4.1754756422471935E+047 mass inside cutoff 1364 51.641546599850024 relax counter 0 log max v [km/s]= 4.2860213375083402 check gamma integral -1.6207152690728147E-002 retry: logT > hydro_mtx_max_allowed_logT 814 2942 retry: logT < hydro_mtx_min_allowed_logT 809 2947 retry: logT < hydro_mtx_min_allowed_logT 828 2950 2950 9.397132 2.705E+05 -14.308112 13.707562 51.642497 0.000000 0.000000 0.000000 0.214776 -1.357730 2585 172 -9.9407E+00 9.397132 -0.244547 9.387244 13.463453 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609433 5 2.8823E+05 5.902638 6.194023 13.707541 13.883088 -7.058442 48.983269 0.000005 0.000002 0.436340 -0.837E+01 retry log_rel_run_E_err -8.0504076442217976 rel_E_err 8.7028602085938795D-12 save photos/x950 for model 2950 k, q, energy_removed_layers before adjustment is 1265 0.99999465861840175 3.1143330793737116E+047 k, q, energy_removed_layers after adjustment is 1364 0.99998159796736652 4.2058781259600940E+047 Layers above q= 0.99998159796736652 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.2636718750000 max vel inside fraction of cutoff 1757.3884911502307 max c/cs inside fraction of cutoff 0.63091426006069884 average v/vesc outside cutoff 0.97520071111808515 Kinetic plus potential energy outside cutoff 4.2058781259600940E+047 mass inside cutoff 1364 51.641546599850024 relax counter 0 log max v [km/s]= 4.2985587899028372 check gamma integral -1.6194299169840665E-002 retry: logT < hydro_mtx_min_allowed_logT 818 2954 retry: logT < hydro_mtx_min_allowed_logT 800 2959 2960 9.396814 2.704E+05 -14.310812 13.699515 51.642497 0.000000 0.000000 0.000000 0.214776 -1.358901 2585 174 -9.7510E+00 9.396814 -0.244620 9.383639 13.461068 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609389 5 2.8823E+05 5.901588 6.193714 13.699494 13.870427 -7.058008 48.983269 0.000005 0.000002 0.436339 -0.838E+01 max increase log_rel_run_E_err -8.0463245561578578 rel_E_err 8.6573327098084336D-12 k, q, energy_removed_layers before adjustment is 1266 0.99999459340945307 3.1504387855667232E+047 k, q, energy_removed_layers after adjustment is 1365 0.99998141641297600 4.2386473378052110E+047 Layers above q= 0.99998141641297600 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.3164062500000 max vel inside fraction of cutoff 1761.0076948890307 max c/cs inside fraction of cutoff 0.63251097859554750 average v/vesc outside cutoff 0.97697513082268728 Kinetic plus potential energy outside cutoff 4.2386473378052110E+047 mass inside cutoff 1365 51.641537223927962 relax counter 0 log max v [km/s]= 4.3046012318248268 check gamma integral -1.6180147722196465E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2962 retry: logT > hydro_mtx_max_allowed_logT 793 2966 retry: logT > hydro_mtx_max_allowed_logT 790 2970 2970 9.396488 2.704E+05 -14.284951 13.691288 51.642497 0.000000 0.000000 0.000000 0.214776 -1.360098 2585 177 -9.8623E+00 9.396488 -0.244695 9.379951 13.458626 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609343 6 2.8823E+05 5.900514 6.193396 13.691267 13.857469 -7.057565 48.983269 0.000005 0.000002 0.436338 -0.840E+01 retry log_rel_run_E_err -8.0423648633205715 rel_E_err 8.2217915508872937D-12 k, q, energy_removed_layers before adjustment is 1267 0.99999452749258977 3.1859088247128339E+047 k, q, energy_removed_layers after adjustment is 1365 0.99998141641297600 4.2714673823311961E+047 Layers above q= 0.99998141641297600 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.3710937500000 max vel inside fraction of cutoff 1764.6999390514793 max c/cs inside fraction of cutoff 0.63414205966061477 average v/vesc outside cutoff 0.98098875242779970 Kinetic plus potential energy outside cutoff 4.2714673823311961E+047 mass inside cutoff 1365 51.641537223927962 relax counter 0 log max v [km/s]= 4.3044995859884487 check gamma integral -1.6165544628853255E-002 retry: logT < hydro_mtx_min_allowed_logT 788 2973 retry: logT > hydro_mtx_max_allowed_logT 785 2977 2980 9.396178 2.704E+05 -14.335051 13.683464 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361238 2585 179 -9.6725E+00 9.396178 -0.244767 9.376441 13.456301 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609299 7 2.8823E+05 5.899491 6.193094 13.683442 13.845135 -7.057143 48.983269 0.000005 0.000002 0.436337 -0.841E+01 max increase log_rel_run_E_err -8.0384128693037411 rel_E_err 7.9966671659186693D-12 k, q, energy_removed_layers before adjustment is 1269 0.99999439353205188 3.2319061126072442E+047 k, q, energy_removed_layers after adjustment is 1365 0.99998141641297600 4.3019481793417173E+047 Layers above q= 0.99998141641297600 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4218750000000 max vel inside fraction of cutoff 1768.2036442455174 max c/cs inside fraction of cutoff 0.63569185038142140 average v/vesc outside cutoff 0.98475872523000085 Kinetic plus potential energy outside cutoff 4.3019481793417173E+047 mass inside cutoff 1365 51.641537223927962 relax counter 0 log max v [km/s]= 4.3058400770592478 check gamma integral -1.6151530202515047E-002 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: adjust_correction failed in eval_equations -- give up in solver 2982 retry: adjust_correction failed in eval_equations -- give up in solver 2982 retry: adjust_correction failed in eval_equations -- give up in solver 2982 retry: adjust_correction failed in eval_equations -- give up in solver 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 retry: logT < hydro_mtx_min_allowed_logT 780 2982 2990 9.396130 2.704E+05 -13.660233 13.682253 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361415 2312 191 -1.2493E+01 9.396130 -0.244778 9.375897 13.455941 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609293 3 2.8823E+05 5.899333 6.193046 13.682232 13.843226 -7.057078 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0339279149662026 rel_E_err 8.2848503024361369D-12 k, q, energy_removed_layers before adjustment is 996 0.99999439353205255 3.2347717118238491E+047 k, q, energy_removed_layers after adjustment is 1092 0.99998141641297666 4.3066127978842314E+047 Layers above q= 0.99998141641297666 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7450059106616 max c/cs inside fraction of cutoff 0.63593148925980703 average v/vesc outside cutoff 0.98535869439102508 Kinetic plus potential energy outside cutoff 4.3066127978842314E+047 mass inside cutoff 1092 51.641537223928005 relax counter 0 log max v [km/s]= 4.3010383546085853 check gamma integral -1.6149350916547012E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 786 2999 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 786 3000 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 9.396129 2.704E+05 -5.181076 13.682217 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361420 2455 193 -1.2303E+01 9.396129 -0.244778 9.375881 13.455930 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609293 9 2.8823E+05 5.899328 6.193048 13.682196 13.843169 -7.057076 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -8.0303069034499668 rel_E_err 3.7350927748556400D-12 save LOGS/profile33.data for model 3000 save photos/3000 for model 3000 k, q, energy_removed_layers before adjustment is 1139 0.99999439353205299 3.2351778969434216E+047 k, q, energy_removed_layers after adjustment is 1235 0.99998141641297711 4.3070728777384538E+047 Layers above q= 0.99998141641297711 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7612240835097 max c/cs inside fraction of cutoff 0.63593866868646287 average v/vesc outside cutoff 0.98543258046854176 Kinetic plus potential energy outside cutoff 4.3070728777384538E+047 mass inside cutoff 1235 51.641537223928019 relax counter 0 log max v [km/s]= 4.2958662535544949 check gamma integral -1.6149285589550966E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 791 3003 retry: logT > hydro_mtx_max_allowed_logT 792 3004 retry: adjust_correction failed in eval_equations -- give up in solver 3004 retry: logT > hydro_mtx_max_allowed_logT 790 3005 3010 9.396129 2.704E+05 -12.768796 13.682205 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361422 2455 197 -1.2716E+01 9.396129 -0.244778 9.375876 13.455926 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899327 6.193048 13.682183 13.843150 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0243680492813017 rel_E_err 8.2207717538641384D-12 k, q, energy_removed_layers before adjustment is 1139 0.99999439353205299 3.2352085141376921E+047 k, q, energy_removed_layers after adjustment is 1235 0.99998141641297711 4.3071216770603016E+047 Layers above q= 0.99998141641297711 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7666955206103 max c/cs inside fraction of cutoff 0.63594109078358552 average v/vesc outside cutoff 0.98543849928974747 Kinetic plus potential energy outside cutoff 4.3071216770603016E+047 mass inside cutoff 1235 51.641537223928019 relax counter 0 log max v [km/s]= 4.2958717226902516 check gamma integral -1.6149263550356969E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 789 3013 retry: logT < hydro_mtx_min_allowed_logT 789 3013 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: logT < hydro_mtx_min_allowed_logT 790 3016 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3016 3020 9.396128 2.704E+05 -14.551373 13.682201 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361422 2554 210 -1.5837E+01 9.396128 -0.244778 9.375874 13.455925 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682180 13.843144 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0205892678144437 rel_E_err 8.2834649324209333D-12 k, q, energy_removed_layers before adjustment is 1238 0.99999439353205311 3.2352180913415396E+047 k, q, energy_removed_layers after adjustment is 1334 0.99998141641297722 4.3071369418084730E+047 Layers above q= 0.99998141641297722 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7684070288512 max c/cs inside fraction of cutoff 0.63594184843953827 average v/vesc outside cutoff 0.98544035075204883 Kinetic plus potential energy outside cutoff 4.3071369418084730E+047 mass inside cutoff 1334 51.641537223928033 relax counter 0 log max v [km/s]= 4.2958734265877032 check gamma integral -1.6149256655403208E-002 3030 9.396128 2.704E+05 -14.552195 13.682201 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361422 2625 210 -1.5045E+01 9.396128 -0.244778 9.375874 13.455925 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682180 13.843143 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0168630989502034 rel_E_err 8.2789621088078496D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353205100 3.2352181448633729E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297511 4.3071370271624133E+047 Layers above q= 0.99998141641297511 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7684165886310 max c/cs inside fraction of cutoff 0.63594185268171555 average v/vesc outside cutoff 0.98544036099375687 Kinetic plus potential energy outside cutoff 4.3071370271624133E+047 mass inside cutoff 1405 51.641537223927919 relax counter 0 log max v [km/s]= 4.2958734360975548 check gamma integral -1.6149256617129942E-002 3040 9.396128 2.704E+05 -14.553267 13.682201 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2628 210 -1.4254E+01 9.396128 -0.244778 9.375874 13.455925 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682179 13.843143 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0131465717014745 rel_E_err 7.8737079189803385D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205100 3.2352184761085293E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297511 4.3071375551702611E+047 Layers above q= 0.99998141641297511 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7684757802672 max c/cs inside fraction of cutoff 0.63594187888872278 average v/vesc outside cutoff 0.98544042503950691 Kinetic plus potential energy outside cutoff 4.3071375551702611E+047 mass inside cutoff 1408 51.641537223927919 relax counter 0 log max v [km/s]= 4.2958734949774149 check gamma integral -1.6149256378197814E-002 3050 9.396128 2.704E+05 -14.553331 13.682200 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2628 210 -1.3462E+01 9.396128 -0.244778 9.375873 13.455925 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682179 13.843142 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0094352367387334 rel_E_err 8.6100928870373449D-12 save photos/x050 for model 3050 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205100 3.2352205269682832E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297511 4.3071408239988752E+047 Layers above q= 0.99998141641297511 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7688422792467 max c/cs inside fraction of cutoff 0.63594204113944208 average v/vesc outside cutoff 0.98544082151688150 Kinetic plus potential energy outside cutoff 4.3071408239988752E+047 mass inside cutoff 1408 51.641537223927919 relax counter 0 log max v [km/s]= 4.2958738594451384 check gamma integral -1.6149254902004313E-002 retry: logT > hydro_mtx_max_allowed_logT 790 3055 retry: logT < hydro_mtx_min_allowed_logT 791 3056 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 3057 retry: logT < hydro_mtx_min_allowed_logT 791 3058 3060 9.396128 2.704E+05 -14.553333 13.682198 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2628 214 -1.3874E+01 9.396128 -0.244778 9.375873 13.455924 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899326 6.193048 13.682177 13.843139 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0058144287034683 rel_E_err 8.4500694415208901D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205088 3.2352245456687313E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297500 4.3071472292916355E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7695604471994 max c/cs inside fraction of cutoff 0.63594235906335506 average v/vesc outside cutoff 0.98544159840307066 Kinetic plus potential energy outside cutoff 4.3071472292916355E+047 mass inside cutoff 1408 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958745731504937 check gamma integral -1.6149252009237985E-002 retry: logT < hydro_mtx_min_allowed_logT 792 3062 retry: logT < hydro_mtx_min_allowed_logT 792 3064 retry: logT < hydro_mtx_min_allowed_logT 792 3064 hydro_solver_step returned ierr -1 s% model_number 3064 nz 2628 s% num_retries 217 retry: logT < hydro_mtx_min_allowed_logT 792 3064 retry: logT < hydro_mtx_min_allowed_logT 792 3064 retry: logT < hydro_mtx_min_allowed_logT 792 3064 retry: adjust_correction failed in eval_equations -- give up in solver 3064 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3064 retry: adjust_correction failed in eval_equations -- give up in solver 3064 3070 9.396128 2.704E+05 -14.553333 13.682198 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2629 223 -1.5792E+01 9.396128 -0.244778 9.375873 13.455924 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682177 13.843139 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -8.0022352391625375 rel_E_err 8.4996005104148810D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205077 3.2352249930018285E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297489 4.3071479423253447E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7696403842920 max c/cs inside fraction of cutoff 0.63594239445638068 average v/vesc outside cutoff 0.98544168488874984 Kinetic plus potential energy outside cutoff 4.3071479423253447E+047 mass inside cutoff 1409 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958746525567326 check gamma integral -1.6149251686949046E-002 3080 9.396128 2.704E+05 -14.553333 13.682198 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2628 223 -1.5000E+01 9.396128 -0.244778 9.375873 13.455924 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682177 13.843139 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9986689220062903 rel_E_err 8.0562454985608285D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205066 3.2352250524558318E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297478 4.3071480371349654E+047 Layers above q= 0.99998141641297478 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7696510041826 max c/cs inside fraction of cutoff 0.63594239916534312 average v/vesc outside cutoff 0.98544169638205692 Kinetic plus potential energy outside cutoff 4.3071480371349654E+047 mass inside cutoff 1408 51.641537223927898 relax counter 0 log max v [km/s]= 4.2958746631056925 check gamma integral -1.6149251644382294E-002 3090 9.396128 2.704E+05 -14.553333 13.682198 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2628 223 -1.4208E+01 9.396128 -0.244778 9.375873 13.455924 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899326 6.193048 13.682177 13.843139 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9950968460112595 rel_E_err 8.2403417411212055D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205055 3.2352254204333053E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297467 4.3071486236872908E+047 Layers above q= 0.99998141641297467 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7697167597473 max c/cs inside fraction of cutoff 0.63594242827964509 average v/vesc outside cutoff 0.98544176752807167 Kinetic plus potential energy outside cutoff 4.3071486236872908E+047 mass inside cutoff 1408 51.641537223927898 relax counter 0 log max v [km/s]= 4.2958747284188572 check gamma integral -1.6149251380014159E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 9.396128 2.704E+05 -14.553334 13.682197 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361423 2627 223 -1.3416E+01 9.396128 -0.244778 9.375872 13.455924 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899326 6.193047 13.682176 13.843137 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9915489242851478 rel_E_err 8.6102660825659068D-12 save LOGS/profile34.data for model 3100 save photos/x100 for model 3100 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205055 3.2352276987064660E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297467 4.3071522549853628E+047 Layers above q= 0.99998141641297467 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7701239008370 max c/cs inside fraction of cutoff 0.63594260852086282 average v/vesc outside cutoff 0.98544220796931947 Kinetic plus potential energy outside cutoff 4.3071522549853628E+047 mass inside cutoff 1407 51.641537223927898 relax counter 0 log max v [km/s]= 4.2958751326976756 check gamma integral -1.6149249739506780E-002 retry: logT < hydro_mtx_min_allowed_logT 790 3109 retry: adjust_correction failed in eval_equations -- give up in solver 3109 retry: logT < hydro_mtx_min_allowed_logT 789 3110 3110 9.396128 2.704E+05 -14.553339 13.682193 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2626 226 -1.3527E+01 9.396128 -0.244778 9.375870 13.455923 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899325 6.193047 13.682172 13.843131 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9880192156911729 rel_E_err 7.8995125864768309D-12 k, q, energy_removed_layers before adjustment is 1310 0.99999439353205088 3.2352375991429060E+047 k, q, energy_removed_layers after adjustment is 1406 0.99998141641297500 4.3071680349716467E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7718931923448 max c/cs inside fraction of cutoff 0.63594339175930026 average v/vesc outside cutoff 0.98544412192780528 Kinetic plus potential energy outside cutoff 4.3071680349716467E+047 mass inside cutoff 1406 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958768871382924 check gamma integral -1.6149242611988884E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3111 hydro_solver_step returned ierr -1 s% model_number 3111 nz 2626 s% num_retries 227 retry: logT < hydro_mtx_min_allowed_logT 791 3111 retry: logT < hydro_mtx_min_allowed_logT 791 3112 retry: adjust_correction failed in eval_equations -- give up in solver 3112 retry: adjust_correction failed in eval_equations -- give up in solver 3113 3120 9.396128 2.704E+05 -14.553339 13.682193 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 231 -1.4241E+01 9.396128 -0.244778 9.375870 13.455923 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682172 13.843131 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9846017868286339 rel_E_err 8.6376294104961565D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205077 3.2352380447361830E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297489 4.3071687452338352E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7719728191450 max c/cs inside fraction of cutoff 0.63594342701244733 average v/vesc outside cutoff 0.98544420807678734 Kinetic plus potential energy outside cutoff 4.3071687452338352E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958769660213143 check gamma integral -1.6149242291704172E-002 retry: logT < hydro_mtx_min_allowed_logT 792 3123 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3124 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3129 3130 9.396128 2.704E+05 -14.553339 13.682193 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2628 234 -1.4352E+01 9.396128 -0.244778 9.375870 13.455923 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899325 6.193047 13.682171 13.843131 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9811039169857612 rel_E_err 8.2656268458118715D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205077 3.2352386402316974E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297489 4.3071696944208422E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7720792348107 max c/cs inside fraction of cutoff 0.63594347412562757 average v/vesc outside cutoff 0.98544432320550190 Kinetic plus potential energy outside cutoff 4.3071696944208422E+047 mass inside cutoff 1408 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958770714315229 check gamma integral -1.6149241862451955E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3140 3140 9.396128 2.704E+05 -14.553340 13.682192 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 235 -1.3861E+01 9.396128 -0.244778 9.375870 13.455923 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899325 6.193047 13.682171 13.843130 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9777148842666090 rel_E_err 8.1054302120118437D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205088 3.2352401127628471E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297500 4.3071720414837900E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7723423851355 max c/cs inside fraction of cutoff 0.63594359062230055 average v/vesc outside cutoff 0.98544460788243304 Kinetic plus potential energy outside cutoff 4.3071720414837900E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958773320367225 check gamma integral -1.6149240802329712E-002 retry: logT < hydro_mtx_min_allowed_logT 793 3142 hydro_solver_step returned ierr -1 s% model_number 3144 nz 2627 s% num_retries 236 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3144 retry: adjust_correction failed in eval_equations -- give up in solver 3145 retry: logT < hydro_mtx_min_allowed_logT 795 3150 3150 9.396128 2.704E+05 -14.553340 13.682192 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 239 -1.4273E+01 9.396128 -0.244778 9.375870 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 6 2.8823E+05 5.899325 6.193047 13.682170 13.843129 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9743934372936174 rel_E_err 8.0529549911779075D-12 save photos/x150 for model 3150 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205088 3.2352410793576163E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297500 4.3071735821526104E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7725151199925 max c/cs inside fraction of cutoff 0.63594366709595307 average v/vesc outside cutoff 0.98544479475160163 Kinetic plus potential energy outside cutoff 4.3071735821526104E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958775030588106 check gamma integral -1.6149240106756609E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3151 3160 9.396128 2.704E+05 -14.553341 13.682191 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 240 -1.3783E+01 9.396128 -0.244778 9.375870 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682170 13.843128 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9710503634302645 rel_E_err 8.1004078339680080D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205077 3.2352420587878050E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297489 4.3071751432799510E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7726901487345 max c/cs inside fraction of cutoff 0.63594374458674019 average v/vesc outside cutoff 0.98544498410345072 Kinetic plus potential energy outside cutoff 4.3071751432799510E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958776763170956 check gamma integral -1.6149239402037285E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 793 3166 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 retry: adjust_correction failed in eval_equations -- give up in solver 3168 retry: logT < hydro_mtx_min_allowed_logT 792 3168 3170 9.396128 2.704E+05 -14.553342 13.682191 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 250 -1.6001E+01 9.396128 -0.244778 9.375869 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682169 13.843127 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9676676895306020 rel_E_err 8.5254051819423182D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205077 3.2352444396438786E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297489 4.3071789380922122E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7731156264215 max c/cs inside fraction of cutoff 0.63594393294169116 average v/vesc outside cutoff 0.98544544437674075 Kinetic plus potential energy outside cutoff 4.3071789380922122E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958780973350574 check gamma integral -1.6149237688549461E-002 3180 9.396128 2.704E+05 -14.553342 13.682191 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2627 250 -1.5209E+01 9.396128 -0.244778 9.375869 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682169 13.843127 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9643348746756670 rel_E_err 8.3972478739862724D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205077 3.2352444763398534E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297489 4.3071789966289906E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7731221793324 max c/cs inside fraction of cutoff 0.63594393585181874 average v/vesc outside cutoff 0.98544545148009077 Kinetic plus potential energy outside cutoff 4.3071789966289906E+047 mass inside cutoff 1407 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958781038179055 check gamma integral -1.6149237661415353E-002 3190 9.396128 2.704E+05 -14.553342 13.682190 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2628 250 -1.4418E+01 9.396128 -0.244778 9.375869 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682169 13.843127 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9610677836835553 rel_E_err 8.3596666100219140D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205077 3.2352447034054882E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297489 4.3071793585894922E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7731627532285 max c/cs inside fraction of cutoff 0.63594395381948832 average v/vesc outside cutoff 0.98544549538553894 Kinetic plus potential energy outside cutoff 4.3071793585894922E+047 mass inside cutoff 1408 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958781439568003 check gamma integral -1.6149237497980626E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 9.396128 2.704E+05 -14.553343 13.682190 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2629 250 -1.3626E+01 9.396128 -0.244778 9.375869 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682168 13.843126 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9578045431309308 rel_E_err 8.0578041941897540D-12 save LOGS/profile35.data for model 3200 save photos/x200 for model 3200 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205088 3.2352461091894727E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297500 4.3071815992689138E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7734139760885 max c/cs inside fraction of cutoff 0.63594406503761558 average v/vesc outside cutoff 0.98544576715999521 Kinetic plus potential energy outside cutoff 4.3071815992689138E+047 mass inside cutoff 1409 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958783924407973 check gamma integral -1.6149236485695530E-002 retry: logT < hydro_mtx_min_allowed_logT 792 3204 retry: logT < hydro_mtx_min_allowed_logT 792 3205 retry: logT > hydro_mtx_max_allowed_logT 792 3205 retry: adjust_correction failed in eval_equations -- give up in solver 3206 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 793 3209 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 3210 3210 9.396128 2.704E+05 -14.553343 13.682189 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2629 256 -1.4640E+01 9.396128 -0.244778 9.375868 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899325 6.193047 13.682168 13.843125 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9545788629821672 rel_E_err 7.4476714953150275D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205088 3.2352479660041570E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297500 4.3071845588312862E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7737458031124 max c/cs inside fraction of cutoff 0.63594421193671358 average v/vesc outside cutoff 0.98544612612557347 Kinetic plus potential energy outside cutoff 4.3071845588312862E+047 mass inside cutoff 1409 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958787205353035 check gamma integral -1.6149235149396174E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 793 3212 retry: logT > hydro_mtx_max_allowed_logT 793 3212 3220 9.396128 2.704E+05 -14.553344 13.682189 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2630 258 -1.4450E+01 9.396128 -0.244778 9.375868 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682168 13.843125 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9513394694916482 rel_E_err 7.9182166420317884D-12 k, q, energy_removed_layers before adjustment is 1314 0.99999439353205088 3.2352482008820941E+047 k, q, energy_removed_layers after adjustment is 1410 0.99998141641297500 4.3071849332433651E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7737877732309 max c/cs inside fraction of cutoff 0.63594423052236393 average v/vesc outside cutoff 0.98544617154121683 Kinetic plus potential energy outside cutoff 4.3071849332433651E+047 mass inside cutoff 1410 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958787620257262 check gamma integral -1.6149234980380189E-002 retry: logT < hydro_mtx_min_allowed_logT 794 3223 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3224 retry: logT < hydro_mtx_min_allowed_logT 794 3225 retry: adjust_correction failed in eval_equations -- give up in solver 3225 retry: logT < hydro_mtx_min_allowed_logT 794 3225 3230 9.396128 2.704E+05 -14.553344 13.682189 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2630 263 -1.5164E+01 9.396128 -0.244778 9.375868 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682167 13.843124 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9481883802233577 rel_E_err 7.9641108142373298D-12 k, q, energy_removed_layers before adjustment is 1314 0.99999439353205088 3.2352484015374590E+047 k, q, energy_removed_layers after adjustment is 1410 0.99998141641297500 4.3071852531089856E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7738236274702 max c/cs inside fraction of cutoff 0.63594424639955327 average v/vesc outside cutoff 0.98544621033924107 Kinetic plus potential energy outside cutoff 4.3071852531089856E+047 mass inside cutoff 1410 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958787974685473 check gamma integral -1.6149234835971551E-002 3240 9.396128 2.704E+05 -14.553344 13.682189 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2629 263 -1.4372E+01 9.396128 -0.244778 9.375868 13.455922 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899325 6.193047 13.682167 13.843124 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9449992519010415 rel_E_err 8.1750508179958300D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205088 3.2352486537794566E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297500 4.3071856551973624E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7738687007293 max c/cs inside fraction of cutoff 0.63594426636061530 average v/vesc outside cutoff 0.98544625911179651 Kinetic plus potential energy outside cutoff 4.3071856551973624E+047 mass inside cutoff 1409 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958788420225806 check gamma integral -1.6149234653128727E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3242 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 3244 3250 9.396128 2.704E+05 -14.553344 13.682189 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2629 265 -1.4182E+01 9.396128 -0.244778 9.375868 13.455921 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682167 13.843124 -7.057075 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9418301743317379 rel_E_err 8.2642413786053401D-12 save photos/x250 for model 3250 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205088 3.2352491290418127E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297500 4.3071864127507992E+047 Layers above q= 0.99998141641297500 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7739536300708 max c/cs inside fraction of cutoff 0.63594430396332902 average v/vesc outside cutoff 0.98544635099801337 Kinetic plus potential energy outside cutoff 4.3071864127507992E+047 mass inside cutoff 1409 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958789259671519 check gamma integral -1.6149234311784069E-002 retry: logT < hydro_mtx_min_allowed_logT 794 3260 3260 9.396128 2.704E+05 -14.553345 13.682188 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2628 266 -1.3691E+01 9.396128 -0.244778 9.375868 13.455921 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899325 6.193047 13.682166 13.843123 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9387091405615928 rel_E_err 7.9594348087093064D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205077 3.2352513061417698E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297489 4.3071898828072221E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7743426960628 max c/cs inside fraction of cutoff 0.63594447620073180 average v/vesc outside cutoff 0.98544677188267371 Kinetic plus potential energy outside cutoff 4.3071898828072221E+047 mass inside cutoff 1408 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958793104097595 check gamma integral -1.6149232744945764E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3261 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3262 retry: logT < hydro_mtx_min_allowed_logT 795 3265 retry: logT < hydro_mtx_min_allowed_logT 795 3266 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3268 3270 9.396128 2.704E+05 -14.553345 13.682187 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361424 2628 271 -1.4405E+01 9.396128 -0.244778 9.375868 13.455921 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682166 13.843122 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9355585838791489 rel_E_err 8.0697540069777203D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205077 3.2352520559975084E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297489 4.3071910780260154E+047 Layers above q= 0.99998141641297489 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7744766984179 max c/cs inside fraction of cutoff 0.63594453553172736 average v/vesc outside cutoff 0.98544691685324926 Kinetic plus potential energy outside cutoff 4.3071910780260154E+047 mass inside cutoff 1408 51.641537223927912 relax counter 0 log max v [km/s]= 4.2958794427824829 check gamma integral -1.6149232204685126E-002 3280 9.396128 2.704E+05 -14.553346 13.682187 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 271 -1.3613E+01 9.396128 -0.244778 9.375867 13.455921 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899325 6.193047 13.682165 13.843121 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9324485185693767 rel_E_err 8.4014043420936165D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205044 3.2352535040519768E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297456 4.3071933860840235E+047 Layers above q= 0.99998141641297456 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7747354772343 max c/cs inside fraction of cutoff 0.63594465009030654 average v/vesc outside cutoff 0.98544719678167803 Kinetic plus potential energy outside cutoff 4.3071933860840235E+047 mass inside cutoff 1408 51.641537223927891 relax counter 0 log max v [km/s]= 4.2958796983548115 check gamma integral -1.6149231162178652E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 3285 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3288 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3289 3290 9.396128 2.704E+05 -14.553348 13.682186 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 274 -1.3883E+01 9.396128 -0.244778 9.375867 13.455921 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899324 6.193047 13.682164 13.843119 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9293685571094770 rel_E_err 8.3125601572697523D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205044 3.2352569308863324E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297456 4.3071988480560678E+047 Layers above q= 0.99998141641297456 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7753478858781 max c/cs inside fraction of cutoff 0.63594492119775359 average v/vesc outside cutoff 0.98544785926490341 Kinetic plus potential energy outside cutoff 4.3071988480560678E+047 mass inside cutoff 1408 51.641537223927891 relax counter 0 log max v [km/s]= 4.2958803028631953 check gamma integral -1.6149228694735333E-002 retry: logT < hydro_mtx_min_allowed_logT 794 3291 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 9.396128 2.704E+05 -14.553349 13.682185 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 275 -1.3392E+01 9.396128 -0.244778 9.375866 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899324 6.193047 13.682163 13.843118 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9263222499645138 rel_E_err 8.1953135408451081D-12 save LOGS/profile36.data for model 3300 save photos/x300 for model 3300 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205055 3.2352593403677354E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297467 4.3072026885027422E+047 Layers above q= 0.99998141641297467 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7757784829087 max c/cs inside fraction of cutoff 0.63594511182110602 average v/vesc outside cutoff 0.98544832508394575 Kinetic plus potential energy outside cutoff 4.3072026885027422E+047 mass inside cutoff 1407 51.641537223927898 relax counter 0 log max v [km/s]= 4.2958807276589708 check gamma integral -1.6149226960734273E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3304 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 791 3305 retry: adjust_correction failed in eval_equations -- give up in solver 3306 retry: adjust_correction failed in eval_equations -- give up in solver 3307 retry: logT > hydro_mtx_max_allowed_logT 795 3310 3310 9.396128 2.704E+05 -14.553350 13.682183 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2626 280 -1.4105E+01 9.396128 -0.244778 9.375866 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899324 6.193047 13.682162 13.843115 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.9233593899101464 rel_E_err 7.9850662834277304D-12 k, q, energy_removed_layers before adjustment is 1310 0.99999439353205055 3.2352628886419866E+047 k, q, energy_removed_layers after adjustment is 1406 0.99998141641297467 4.3072083440402133E+047 Layers above q= 0.99998141641297467 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7764125964204 max c/cs inside fraction of cutoff 0.63594539253716686 average v/vesc outside cutoff 0.98544901104453464 Kinetic plus potential energy outside cutoff 4.3072083440402133E+047 mass inside cutoff 1406 51.641537223927898 relax counter 0 log max v [km/s]= 4.2958813528398272 check gamma integral -1.6149224405606843E-002 retry: logT > hydro_mtx_max_allowed_logT 795 3311 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3312 3320 9.396128 2.704E+05 -14.553351 13.682183 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 282 -1.3915E+01 9.396128 -0.244778 9.375866 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899324 6.193047 13.682161 13.843115 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9203767068384767 rel_E_err 7.8269478749666529D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205022 3.2352636381292089E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297433 4.3072095386737187E+047 Layers above q= 0.99998141641297433 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7765465338209 max c/cs inside fraction of cutoff 0.63594545183817952 average v/vesc outside cutoff 0.98544915592512861 Kinetic plus potential energy outside cutoff 4.3072095386737187E+047 mass inside cutoff 1407 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958814848395379 check gamma integral -1.6149223866135778E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3325 retry: logT < hydro_mtx_min_allowed_logT 794 3325 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3328 retry: logT > hydro_mtx_max_allowed_logT 794 3328 retry: logT > hydro_mtx_max_allowed_logT 794 3328 retry: logT < hydro_mtx_min_allowed_logT 794 3328 retry: adjust_correction failed in eval_equations -- give up in solver 3328 retry: logT < hydro_mtx_min_allowed_logT 794 3328 3330 9.396128 2.704E+05 -14.553351 13.682182 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 295 -1.7037E+01 9.396128 -0.244778 9.375865 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682161 13.843114 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9173985794265764 rel_E_err 8.3572420395353946D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205022 3.2352648872448419E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297433 4.3072115296513486E+047 Layers above q= 0.99998141641297433 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7767697609211 max c/cs inside fraction of cutoff 0.63594555066133907 average v/vesc outside cutoff 0.98544939741259663 Kinetic plus potential energy outside cutoff 4.3072115296513486E+047 mass inside cutoff 1407 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958817047906681 check gamma integral -1.6149222967405313E-002 3340 9.396128 2.704E+05 -14.553351 13.682182 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 295 -1.6245E+01 9.396128 -0.244778 9.375865 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682161 13.843114 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9144241148214522 rel_E_err 7.8783839864936904D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205022 3.2352648906497879E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297433 4.3072115351257713E+047 Layers above q= 0.99998141641297433 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7767703644815 max c/cs inside fraction of cutoff 0.63594555093477778 average v/vesc outside cutoff 0.98544939808008325 Kinetic plus potential energy outside cutoff 4.3072115351257713E+047 mass inside cutoff 1407 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958817053853089 check gamma integral -1.6149222965405149E-002 3350 9.396128 2.704E+05 -14.553351 13.682182 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 295 -1.5453E+01 9.396128 -0.244778 9.375865 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682161 13.843114 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9114535115279487 rel_E_err 8.2216377530256785D-12 save photos/x350 for model 3350 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205022 3.2352649115886965E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297433 4.3072115685470488E+047 Layers above q= 0.99998141641297433 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7767741015684 max c/cs inside fraction of cutoff 0.63594555259737395 average v/vesc outside cutoff 0.98544940213726140 Kinetic plus potential energy outside cutoff 4.3072115685470488E+047 mass inside cutoff 1407 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958817090671584 check gamma integral -1.6149222950432807E-002 3360 9.396128 2.704E+05 -14.553351 13.682182 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2627 295 -1.4661E+01 9.396128 -0.244778 9.375865 13.455920 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682161 13.843114 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9085157864505859 rel_E_err 8.6393613074663810D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353205022 3.2352650410931685E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297433 4.3072117750082920E+047 Layers above q= 0.99998141641297433 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7767972406277 max c/cs inside fraction of cutoff 0.63594556284801496 average v/vesc outside cutoff 0.98544942718239692 Kinetic plus potential energy outside cutoff 4.3072117750082920E+047 mass inside cutoff 1407 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958817318638225 check gamma integral -1.6149222857143715E-002 3370 9.396128 2.704E+05 -14.553352 13.682182 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 295 -1.3870E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899324 6.193046 13.682161 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9055699557054782 rel_E_err 8.3420017144984704D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352658428060756E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072130528830618E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7769405115791 max c/cs inside fraction of cutoff 0.63594562627961670 average v/vesc outside cutoff 0.98544958217907608 Kinetic plus potential energy outside cutoff 4.3072130528830618E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958818730004484 check gamma integral -1.6149222279245840E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3373 retry: logT < hydro_mtx_min_allowed_logT 795 3376 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: logT < hydro_mtx_min_allowed_logT 794 3378 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3378 retry: logT > hydro_mtx_max_allowed_logT 794 3378 retry: logT > hydro_mtx_max_allowed_logT 794 3378 3380 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.8195E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.9026817101493059 rel_E_err 8.1523635356995253D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352670263856787E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072149394053524E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7771520268798 max c/cs inside fraction of cutoff 0.63594571991756377 average v/vesc outside cutoff 0.98544981099672002 Kinetic plus potential energy outside cutoff 4.3072149394053524E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958820813219667 check gamma integral -1.6149221427205155E-002 3390 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.7404E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8998292972432154 rel_E_err 8.5037570234089807D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352670266480390E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072149398710674E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7771520687852 max c/cs inside fraction of cutoff 0.63594571994224292 average v/vesc outside cutoff 0.98544981105668239 Kinetic plus potential energy outside cutoff 4.3072149398710674E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958820813632350 check gamma integral -1.6149221427001332E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.6612E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8969896998579072 rel_E_err 8.4348291740130849D-12 save LOGS/profile37.data for model 3400 save photos/x400 for model 3400 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352670281278683E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072149422776126E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7771523282540 max c/cs inside fraction of cutoff 0.63594572006150207 average v/vesc outside cutoff 0.98544981135205267 Kinetic plus potential energy outside cutoff 4.3072149422776126E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958820816187604 check gamma integral -1.6149221425867260E-002 3410 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.5820E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8941569241267393 rel_E_err 8.4421029679479317D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352670371454743E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072149566984683E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7771539348182 max c/cs inside fraction of cutoff 0.63594572078436884 average v/vesc outside cutoff 0.98544981310466673 Kinetic plus potential energy outside cutoff 4.3072149566984683E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958820832009055 check gamma integral -1.6149221418809184E-002 3420 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.5028E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843113 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8913834332644655 rel_E_err 8.2339339339280177D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352670928349196E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072150455081093E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7771638822383 max c/cs inside fraction of cutoff 0.63594572519460679 average v/vesc outside cutoff 0.98544982387981161 Kinetic plus potential energy outside cutoff 4.3072150455081093E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958820929970605 check gamma integral -1.6149221379320899E-002 3430 9.396128 2.704E+05 -14.553352 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 312 -1.4236E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682160 13.843112 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8885665760007520 rel_E_err 8.4765668947554648D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352674375047591E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072155949160094E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7772254740437 max c/cs inside fraction of cutoff 0.63594575246751228 average v/vesc outside cutoff 0.98544989052077037 Kinetic plus potential energy outside cutoff 4.3072155949160094E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958821536496306 check gamma integral -1.6149221131167176E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3437 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3440 3440 9.396128 2.704E+05 -14.553353 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 314 -1.4047E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 11 2.8823E+05 5.899324 6.193046 13.682159 13.843112 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8858053968724198 rel_E_err 8.2625095530270984D-12 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352688066022217E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072177771303452E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7774701439578 max c/cs inside fraction of cutoff 0.63594586078384452 average v/vesc outside cutoff 0.98545015520362977 Kinetic plus potential energy outside cutoff 4.3072177771303452E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958823945449627 check gamma integral -1.6149220145925441E-002 retry: logT < hydro_mtx_min_allowed_logT 794 3441 retry: adjust_correction failed in eval_equations -- give up in solver 3441 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3442 retry: logT < hydro_mtx_min_allowed_logT 796 3449 retry: logT > hydro_mtx_max_allowed_logT 796 3449 retry: logT < hydro_mtx_min_allowed_logT 796 3450 3450 9.396128 2.704E+05 -14.553353 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2628 320 -1.5061E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 6 2.8823E+05 5.899324 6.193046 13.682159 13.843111 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8830714819480328 rel_E_err 8.4543991468297854D-12 save photos/x450 for model 3450 k, q, energy_removed_layers before adjustment is 1312 0.99999439353205033 3.2352691104908230E+047 k, q, energy_removed_layers after adjustment is 1408 0.99998141641297444 4.3072182615373762E+047 Layers above q= 0.99998141641297444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7775244477498 max c/cs inside fraction of cutoff 0.63594588482887748 average v/vesc outside cutoff 0.98545021395903953 Kinetic plus potential energy outside cutoff 4.3072182615373762E+047 mass inside cutoff 1408 51.641537223927884 relax counter 0 log max v [km/s]= 4.2958824480026925 check gamma integral -1.6149219926438869E-002 retry: logT < hydro_mtx_min_allowed_logT 796 3452 3460 9.396128 2.704E+05 -14.553353 13.682181 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361425 2629 321 -1.4570E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682159 13.843111 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8803456932863369 rel_E_err 7.9007249342817734D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205011 3.2352692764585174E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297422 4.3072185261163429E+047 Layers above q= 0.99998141641297422 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7775541033227 max c/cs inside fraction of cutoff 0.63594589796410139 average v/vesc outside cutoff 0.98545024604371423 Kinetic plus potential energy outside cutoff 4.3072185261163429E+047 mass inside cutoff 1409 51.641537223927870 relax counter 0 log max v [km/s]= 4.2958824771949136 check gamma integral -1.6149219806918372E-002 hydro_solver_step returned ierr -1 s% model_number 3466 nz 2630 s% num_retries 321 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3466 retry: logT < hydro_mtx_min_allowed_logT 792 3467 3470 9.396128 2.704E+05 -14.553353 13.682180 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2630 323 -1.4380E+01 9.396128 -0.244778 9.375865 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682159 13.843111 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8776296596260407 rel_E_err 8.3657281455776746D-12 k, q, energy_removed_layers before adjustment is 1314 0.99999439353205011 3.2352697602397829E+047 k, q, energy_removed_layers after adjustment is 1410 0.99998141641297422 4.3072192972519610E+047 Layers above q= 0.99998141641297422 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7776405568445 max c/cs inside fraction of cutoff 0.63594593624000217 average v/vesc outside cutoff 0.98545033957763073 Kinetic plus potential energy outside cutoff 4.3072192972519610E+047 mass inside cutoff 1410 51.641537223927870 relax counter 0 log max v [km/s]= 4.2958825622918893 check gamma integral -1.6149219459540287E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 3480 3480 9.396128 2.704E+05 -14.553354 13.682180 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 324 -1.3890E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 7 2.8823E+05 5.899324 6.193046 13.682158 13.843110 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8749344875865734 rel_E_err 8.1892520687563406D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205000 3.2352711395053350E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297411 4.3072214956743573E+047 Layers above q= 0.99998141641297411 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7778870441821 max c/cs inside fraction of cutoff 0.63594604536325250 average v/vesc outside cutoff 0.98545060621776959 Kinetic plus potential energy outside cutoff 4.3072214956743573E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958828048641164 check gamma integral -1.6149218465864004E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3482 retry: adjust_correction failed in eval_equations -- give up in solver 3482 retry: logT < hydro_mtx_min_allowed_logT 798 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT < hydro_mtx_min_allowed_logT 799 3488 retry: logT > hydro_mtx_max_allowed_logT 799 3488 3490 9.396128 2.704E+05 -14.553354 13.682180 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 337 -1.7011E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682158 13.843110 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8722534050238204 rel_E_err 8.3755997253289124D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353205000 3.2352718665497202E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297411 4.3072226545388834E+047 Layers above q= 0.99998141641297411 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7780169713722 max c/cs inside fraction of cutoff 0.63594610288356557 average v/vesc outside cutoff 0.98545074677870892 Kinetic plus potential energy outside cutoff 4.3072226545388834E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958829327014838 check gamma integral -1.6149217942476861E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 9.396128 2.704E+05 -14.553354 13.682180 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 337 -1.6219E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682158 13.843110 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8695889395545224 rel_E_err 8.0247257951499261D-12 save LOGS/profile38.data for model 3500 save photos/x500 for model 3500 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204989 3.2352718701607152E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297400 4.3072226603419436E+047 Layers above q= 0.99998141641297400 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7780176117847 max c/cs inside fraction of cutoff 0.63594610317386380 average v/vesc outside cutoff 0.98545074748602701 Kinetic plus potential energy outside cutoff 4.3072226603419436E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958829333315585 check gamma integral -1.6149217939326242E-002 3510 9.396128 2.704E+05 -14.553354 13.682180 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 337 -1.5428E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682158 13.843110 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8669375434232167 rel_E_err 8.1159945823997532D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204989 3.2352718923763127E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297400 4.3072226957982867E+047 Layers above q= 0.99998141641297400 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7780215770529 max c/cs inside fraction of cutoff 0.63594610493649473 average v/vesc outside cutoff 0.98545075179003805 Kinetic plus potential energy outside cutoff 4.3072226957982867E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958829372328005 check gamma integral -1.6149217923621412E-002 3520 9.396128 2.704E+05 -14.553354 13.682179 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 337 -1.4636E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682158 13.843110 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8643353597803243 rel_E_err 8.1999895765174510D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204989 3.2352720297859573E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297400 4.3072229148598097E+047 Layers above q= 0.99998141641297400 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7780461289492 max c/cs inside fraction of cutoff 0.63594611581195559 average v/vesc outside cutoff 0.98545077836342188 Kinetic plus potential energy outside cutoff 4.3072229148598097E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958829613878482 check gamma integral -1.6149217824981115E-002 3530 9.396128 2.704E+05 -14.553355 13.682179 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 337 -1.3844E+01 9.396128 -0.244778 9.375864 13.455919 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899324 6.193046 13.682158 13.843109 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8617241941263121 rel_E_err 8.1925425991278435D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204989 3.2352728804450722E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297400 4.3072242707504738E+047 Layers above q= 0.99998141641297400 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7781981478161 max c/cs inside fraction of cutoff 0.63594618311818873 average v/vesc outside cutoff 0.98545094282264967 Kinetic plus potential energy outside cutoff 4.3072242707504738E+047 mass inside cutoff 1409 51.641537223927862 relax counter 0 log max v [km/s]= 4.2958831109336053 check gamma integral -1.6149217212301423E-002 hydro_solver_step returned ierr -1 s% model_number 3535 nz 2629 s% num_retries 337 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3535 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3536 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3537 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3538 3540 9.396128 2.704E+05 -14.553356 13.682178 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 341 -1.4256E+01 9.396128 -0.244778 9.375864 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 4 2.8823E+05 5.899323 6.193046 13.682157 13.843108 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8592334933203309 rel_E_err 7.7822660253137485D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204966 3.2352745247271114E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297378 4.3072268915761279E+047 Layers above q= 0.99998141641297378 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7784919976332 max c/cs inside fraction of cutoff 0.63594631320383377 average v/vesc outside cutoff 0.98545126069504374 Kinetic plus potential energy outside cutoff 4.3072268915761279E+047 mass inside cutoff 1409 51.641537223927855 relax counter 0 log max v [km/s]= 4.2958833999282033 check gamma integral -1.6149216029109379E-002 retry: logT < hydro_mtx_min_allowed_logT 794 3543 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3544 retry: logT > hydro_mtx_max_allowed_logT 797 3546 3550 9.396128 2.704E+05 -14.553356 13.682178 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 344 -1.4368E+01 9.396128 -0.244778 9.375864 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899323 6.193046 13.682157 13.843108 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8566664553437704 rel_E_err 8.3234708806344566D-12 save photos/x550 for model 3550 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204966 3.2352750103848077E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297378 4.3072276657015679E+047 Layers above q= 0.99998141641297378 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7785787860780 max c/cs inside fraction of cutoff 0.63594635163043711 average v/vesc outside cutoff 0.98545135459095434 Kinetic plus potential energy outside cutoff 4.3072276657015679E+047 mass inside cutoff 1409 51.641537223927855 relax counter 0 log max v [km/s]= 4.2958834852662200 check gamma integral -1.6149215679125140E-002 retry: logT < hydro_mtx_min_allowed_logT 797 3560 3560 9.396128 2.704E+05 -14.553356 13.682178 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 345 -1.3877E+01 9.396128 -0.244778 9.375863 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899323 6.193046 13.682156 13.843107 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8541072017892697 rel_E_err 8.0818770355406072D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204955 3.2352764311289202E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297367 4.3072299302372132E+047 Layers above q= 0.99998141641297367 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7788326869738 max c/cs inside fraction of cutoff 0.63594646403345978 average v/vesc outside cutoff 0.98545162924964380 Kinetic plus potential energy outside cutoff 4.3072299302372132E+047 mass inside cutoff 1409 51.641537223927841 relax counter 0 log max v [km/s]= 4.2958837348743373 check gamma integral -1.6149214657075615E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3566 retry: logT < hydro_mtx_min_allowed_logT 797 3569 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3570 3570 9.396127 2.704E+05 -14.553358 13.682177 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 348 -1.3988E+01 9.396127 -0.244778 9.375863 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 7 2.8823E+05 5.899323 6.193046 13.682155 13.843105 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8515695143502970 rel_E_err 8.0487985976586736D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204955 3.2352790067644356E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297367 4.3072340355245128E+047 Layers above q= 0.99998141641297367 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7792929822988 max c/cs inside fraction of cutoff 0.63594666780443454 average v/vesc outside cutoff 0.98545212718212249 Kinetic plus potential energy outside cutoff 4.3072340355245128E+047 mass inside cutoff 1409 51.641537223927841 relax counter 0 log max v [km/s]= 4.2958841872049307 check gamma integral -1.6149212802409604E-002 retry: logT < hydro_mtx_min_allowed_logT 800 3572 retry: logT < hydro_mtx_min_allowed_logT 800 3574 retry: logT > hydro_mtx_max_allowed_logT 801 3579 3580 9.396127 2.704E+05 -14.553358 13.682176 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 351 -1.4099E+01 9.396127 -0.244778 9.375863 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899323 6.193046 13.682155 13.843105 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8490591400201994 rel_E_err 8.2751521175663491D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204955 3.2352799848832538E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297367 4.3072355945715629E+047 Layers above q= 0.99998141641297367 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7794677803697 max c/cs inside fraction of cutoff 0.63594674519071570 average v/vesc outside cutoff 0.98545231628107788 Kinetic plus potential energy outside cutoff 4.3072355945715629E+047 mass inside cutoff 1409 51.641537223927841 relax counter 0 log max v [km/s]= 4.2958843589215663 check gamma integral -1.6149212097339830E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3582 retry: adjust_correction failed in eval_equations -- give up in solver 3583 retry: logT > hydro_mtx_max_allowed_logT 802 3583 retry: adjust_correction failed in eval_equations -- give up in solver 3585 3590 9.396127 2.704E+05 -14.553358 13.682176 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2629 355 -1.4512E+01 9.396127 -0.244779 9.375863 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899323 6.193046 13.682155 13.843104 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8464939156051337 rel_E_err 8.4706786085101424D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204955 3.2352803548853746E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297367 4.3072361843567892E+047 Layers above q= 0.99998141641297367 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7795338998533 max c/cs inside fraction of cutoff 0.63594677446422199 average v/vesc outside cutoff 0.98545238781834388 Kinetic plus potential energy outside cutoff 4.3072361843567892E+047 mass inside cutoff 1409 51.641537223927841 relax counter 0 log max v [km/s]= 4.2958844238671787 check gamma integral -1.6149211831814850E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 9.396127 2.704E+05 -14.553359 13.682176 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361426 2621 355 -1.3720E+01 9.396127 -0.244779 9.375862 13.455918 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899323 6.193046 13.682154 13.843104 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8439784224066429 rel_E_err 8.1975649922452138D-12 save LOGS/profile39.data for model 3600 save photos/x600 for model 3600 k, q, energy_removed_layers before adjustment is 1305 0.99999439353204900 3.2352814870174556E+047 k, q, energy_removed_layers after adjustment is 1401 0.99998141641297311 4.3072379888826394E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7797362225283 max c/cs inside fraction of cutoff 0.63594686403568967 average v/vesc outside cutoff 0.98545260666409662 Kinetic plus potential energy outside cutoff 4.3072379888826394E+047 mass inside cutoff 1401 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958846225671170 check gamma integral -1.6149211015998234E-002 3610 9.396127 2.704E+05 -14.553362 13.682173 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2623 355 -1.2928E+01 9.396127 -0.244779 9.375861 13.455917 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899323 6.193046 13.682151 13.843099 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8414613653714174 rel_E_err 8.4182033943301165D-12 k, q, energy_removed_layers before adjustment is 1307 0.99999439353204911 3.2352884967151719E+047 k, q, energy_removed_layers after adjustment is 1403 0.99998141641297322 4.3072491615278076E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7809889508615 max c/cs inside fraction of cutoff 0.63594741860462733 average v/vesc outside cutoff 0.98545396180732980 Kinetic plus potential energy outside cutoff 4.3072491615278076E+047 mass inside cutoff 1403 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958858518034724 check gamma integral -1.6149205969866316E-002 retry: logT > hydro_mtx_max_allowed_logT 790 3612 retry: logT > hydro_mtx_max_allowed_logT 792 3613 retry: adjust_correction failed in eval_equations -- give up in solver 3613 retry: logT < hydro_mtx_min_allowed_logT 791 3619 retry: adjust_correction failed in eval_equations -- give up in solver 3619 3620 9.396127 2.704E+05 -14.553365 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2623 360 -1.3641E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899322 6.193046 13.682149 13.843095 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8389676478001746 rel_E_err 8.2259674356810000D-12 k, q, energy_removed_layers before adjustment is 1307 0.99999439353204911 3.2352946545635581E+047 k, q, energy_removed_layers after adjustment is 1403 0.99998141641297322 4.3072589764411703E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7820894457550 max c/cs inside fraction of cutoff 0.63594790578034321 average v/vesc outside cutoff 0.98545515226112501 Kinetic plus potential energy outside cutoff 4.3072589764411703E+047 mass inside cutoff 1403 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958869302884750 check gamma integral -1.6149201536552360E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3621 retry: logT < hydro_mtx_min_allowed_logT 790 3621 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 791 3623 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 3625 retry: logT < hydro_mtx_min_allowed_logT 791 3626 retry: logT > hydro_mtx_max_allowed_logT 791 3627 3630 9.396127 2.704E+05 -14.553365 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2623 366 -1.4656E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193046 13.682149 13.843095 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8364961940494080 rel_E_err 8.1682966473184565D-12 k, q, energy_removed_layers before adjustment is 1307 0.99999439353204911 3.2352951087376662E+047 k, q, energy_removed_layers after adjustment is 1403 0.99998141641297322 4.3072597003875599E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7821706085704 max c/cs inside fraction of cutoff 0.63594794171360636 average v/vesc outside cutoff 0.98545524006996010 Kinetic plus potential energy outside cutoff 4.3072597003875599E+047 mass inside cutoff 1403 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958870097840141 check gamma integral -1.6149201209513308E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3632 retry: logT < hydro_mtx_min_allowed_logT 792 3640 3640 9.396127 2.704E+05 -14.553365 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 368 -1.4466E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193046 13.682149 13.843095 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8340501965780085 rel_E_err 8.1213633632165209D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204889 3.2352954902720021E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297300 4.3072603085552995E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7822387896090 max c/cs inside fraction of cutoff 0.63594797190620511 average v/vesc outside cutoff 0.98545531381906470 Kinetic plus potential energy outside cutoff 4.3072603085552995E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958870765592376 check gamma integral -1.6149200935032054E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 791 3642 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3644 retry: logT < hydro_mtx_min_allowed_logT 792 3650 retry: logT < hydro_mtx_min_allowed_logT 793 3650 3650 9.396127 2.704E+05 -14.553365 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 372 -1.4878E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899322 6.193046 13.682149 13.843095 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8315777567324671 rel_E_err 8.3761193139542850D-12 save photos/x650 for model 3650 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204889 3.2352958256063260E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297300 4.3072608430854721E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7822987140069 max c/cs inside fraction of cutoff 0.63594799843753413 average v/vesc outside cutoff 0.98545537865411836 Kinetic plus potential energy outside cutoff 4.3072608430854721E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958871352440786 check gamma integral -1.6149200693237348E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3651 retry: logT < hydro_mtx_min_allowed_logT 794 3652 3660 9.396127 2.704E+05 -14.553365 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2624 374 -1.4688E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193046 13.682148 13.843094 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8291776917210960 rel_E_err 8.2722079824040662D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999439353204878 3.2352959509857100E+047 k, q, energy_removed_layers after adjustment is 1404 0.99998141641297289 4.3072610429731385E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7823211162570 max c/cs inside fraction of cutoff 0.63594800835993626 average v/vesc outside cutoff 0.98545540290077283 Kinetic plus potential energy outside cutoff 4.3072610429731385E+047 mass inside cutoff 1404 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958871571820110 check gamma integral -1.6149200603634135E-002 3670 9.396127 2.704E+05 -14.553366 13.682170 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2624 374 -1.3897E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193046 13.682148 13.843094 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8267482125414123 rel_E_err 8.3496219263499164D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999439353204900 3.2352967043677882E+047 k, q, energy_removed_layers after adjustment is 1404 0.99998141641297311 4.3072622438211904E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7824557523352 max c/cs inside fraction of cutoff 0.63594806796937342 average v/vesc outside cutoff 0.98545554856478368 Kinetic plus potential energy outside cutoff 4.3072622438211904E+047 mass inside cutoff 1404 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958872890155115 check gamma integral -1.6149200060744308E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3673 retry: logT > hydro_mtx_max_allowed_logT 792 3674 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3675 retry: adjust_correction failed in eval_equations -- give up in solver 3675 retry: logT < hydro_mtx_min_allowed_logT 793 3677 3680 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2624 379 -1.4610E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193046 13.682148 13.843094 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8243419656382720 rel_E_err 8.3828735540490481D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999439353204900 3.2352974479650649E+047 k, q, energy_removed_layers after adjustment is 1404 0.99998141641297311 4.3072634290742980E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7825886397072 max c/cs inside fraction of cutoff 0.63594812679967727 average v/vesc outside cutoff 0.98545569232538099 Kinetic plus potential energy outside cutoff 4.3072634290742980E+047 mass inside cutoff 1404 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958874191175571 check gamma integral -1.6149199525376572E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3681 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3682 retry: logT < hydro_mtx_min_allowed_logT 794 3685 hydro_solver_step returned ierr -1 s% model_number 3685 nz 2624 s% num_retries 382 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 hydro_solver_step returned ierr -1 s% model_number 3685 nz 2624 s% num_retries 387 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: logT < hydro_mtx_min_allowed_logT 794 3685 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3685 3690 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2624 392 -1.7732E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682148 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8219684402788721 rel_E_err 8.3681527826976879D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999439353204900 3.2352975015651989E+047 k, q, energy_removed_layers after adjustment is 1404 0.99998141641297311 4.3072635145533855E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7825982140166 max c/cs inside fraction of cutoff 0.63594813104268733 average v/vesc outside cutoff 0.98545570269483185 Kinetic plus potential energy outside cutoff 4.3072635145533855E+047 mass inside cutoff 1404 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958874284905884 check gamma integral -1.6149199486704447E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 392 -1.6940E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682148 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8195789071356261 rel_E_err 7.6780083507313539D-12 save LOGS/profile40.data for model 3700 save photos/x700 for model 3700 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204878 3.2352975022712989E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297289 4.3072635157286108E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7825983359321 max c/cs inside fraction of cutoff 0.63594813110532455 average v/vesc outside cutoff 0.98545570283195272 Kinetic plus potential energy outside cutoff 4.3072635157286108E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958874286099409 check gamma integral -1.6149199486356989E-002 3710 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 392 -1.6148E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682148 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8172163090467448 rel_E_err 8.0908827121231917D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204878 3.2352975065230108E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297289 4.3072635225532904E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7825990908011 max c/cs inside fraction of cutoff 0.63594813144587725 average v/vesc outside cutoff 0.98545570366319046 Kinetic plus potential energy outside cutoff 4.3072635225532904E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958874293489364 check gamma integral -1.6149199482947772E-002 3720 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 392 -1.5356E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682148 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8148535246414985 rel_E_err 8.1366036990795043D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204878 3.2352975327040603E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297289 4.3072635643308192E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7826037647483 max c/cs inside fraction of cutoff 0.63594813352365442 average v/vesc outside cutoff 0.98545570873383692 Kinetic plus potential energy outside cutoff 4.3072635643308192E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958874339245909 check gamma integral -1.6149199464275323E-002 3730 9.396127 2.704E+05 -14.553366 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 392 -1.4564E+01 9.396127 -0.244779 9.375860 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682148 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8125452049209345 rel_E_err 8.4684272214204729D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204878 3.2352976946642778E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297289 4.3072638225237240E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7826327045968 max c/cs inside fraction of cutoff 0.63594814634043484 average v/vesc outside cutoff 0.98545574005358771 Kinetic plus potential energy outside cutoff 4.3072638225237240E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958874622552825 check gamma integral -1.6149199347502335E-002 3740 9.396127 2.704E+05 -14.553367 13.682169 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2625 392 -1.3773E+01 9.396127 -0.244779 9.375859 13.455916 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193046 13.682147 13.843093 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8102136056024314 rel_E_err 8.2115930463183955D-12 k, q, energy_removed_layers before adjustment is 1309 0.99999439353204878 3.2352986973345091E+047 k, q, energy_removed_layers after adjustment is 1405 0.99998141641297289 4.3072654207083339E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7828118925027 max c/cs inside fraction of cutoff 0.63594822567135434 average v/vesc outside cutoff 0.98545593390099517 Kinetic plus potential energy outside cutoff 4.3072654207083339E+047 mass inside cutoff 1405 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958876376502415 check gamma integral -1.6149198625392439E-002 retry: logT > hydro_mtx_max_allowed_logT 792 3743 retry: logT < hydro_mtx_min_allowed_logT 793 3743 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3744 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 793 3745 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 3748 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3750 retry: logT < hydro_mtx_min_allowed_logT 795 3750 3750 9.396127 2.704E+05 -14.553367 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2626 399 -1.5088E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.8079128653157781 rel_E_err 7.2677317778640446D-12 save photos/x750 for model 3750 k, q, energy_removed_layers before adjustment is 1310 0.99999439353204889 3.2352995417775680E+047 k, q, energy_removed_layers after adjustment is 1406 0.99998141641297300 4.3072667666975783E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7829628028253 max c/cs inside fraction of cutoff 0.63594829247992535 average v/vesc outside cutoff 0.98545609715688032 Kinetic plus potential energy outside cutoff 4.3072667666975783E+047 mass inside cutoff 1406 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958877853394188 check gamma integral -1.6149198017295145E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3752 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3752 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3752 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3752 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3752 retry: logT < hydro_mtx_min_allowed_logT 795 3752 retry: adjust_correction failed in eval_equations -- give up in solver 3752 hydro_solver_step returned ierr -1 s% model_number 3752 nz 2626 s% num_retries 406 retry: adjust_correction failed in eval_equations -- give up in solver 3752 retry: adjust_correction failed in eval_equations -- give up in solver 3752 3760 9.396127 2.704E+05 -14.553367 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2627 408 -1.7005E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8056082935474338 rel_E_err 7.8839259800196309D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999439353204878 3.2352995539378513E+047 k, q, energy_removed_layers after adjustment is 1407 0.99998141641297289 4.3072667861275856E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7829649710873 max c/cs inside fraction of cutoff 0.63594829344766779 average v/vesc outside cutoff 0.98545609951640534 Kinetic plus potential energy outside cutoff 4.3072667861275856E+047 mass inside cutoff 1407 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958877874612629 check gamma integral -1.6149198009325828E-002 3770 9.396127 2.704E+05 -14.553367 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2629 408 -1.6214E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8033230403719340 rel_E_err 8.7727142444701010D-12 k, q, energy_removed_layers before adjustment is 1313 0.99999439353204878 3.2352995575932425E+047 k, q, energy_removed_layers after adjustment is 1409 0.99998141641297289 4.3072667920033056E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7829656201193 max c/cs inside fraction of cutoff 0.63594829374109851 average v/vesc outside cutoff 0.98545610023314845 Kinetic plus potential energy outside cutoff 4.3072667920033056E+047 mass inside cutoff 1409 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958877880963993 check gamma integral -1.6149198006115299E-002 3780 9.396127 2.704E+05 -14.553367 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2632 408 -1.5422E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.8010597203328018 rel_E_err 8.3137725267275755D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2352995801072007E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072668279358642E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7829696387548 max c/cs inside fraction of cutoff 0.63594829552665955 average v/vesc outside cutoff 0.98545610459487620 Kinetic plus potential energy outside cutoff 4.3072668279358642E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958877920289895 check gamma integral -1.6149197990828770E-002 3790 9.396127 2.704E+05 -14.553367 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2632 408 -1.4630E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7987888114570501 rel_E_err 8.0087927666583458D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2352997193634342E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072670499415972E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7829945210826 max c/cs inside fraction of cutoff 0.63594830654868650 average v/vesc outside cutoff 0.98545613152543110 Kinetic plus potential energy outside cutoff 4.3072670499415972E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958878163781442 check gamma integral -1.6149197890458784E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 9.396127 2.704E+05 -14.553368 13.682168 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2632 408 -1.3838E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682147 13.843092 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7965139018078826 rel_E_err 8.3851249773049329D-12 save LOGS/profile41.data for model 3800 save photos/x800 for model 3800 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2353005814570390E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072684240646523E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7831485858972 max c/cs inside fraction of cutoff 0.63594837475791754 average v/vesc outside cutoff 0.98545629819645442 Kinetic plus potential energy outside cutoff 4.3072684240646523E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958879671260561 check gamma integral -1.6149197269213246E-002 retry: logT < hydro_mtx_min_allowed_logT 793 3807 retry: logT < hydro_mtx_min_allowed_logT 792 3809 retry: logT < hydro_mtx_min_allowed_logT 792 3809 hydro_solver_step returned ierr -1 s% model_number 3809 nz 2632 s% num_retries 411 retry: logT < hydro_mtx_min_allowed_logT 792 3809 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3809 3810 9.396127 2.704E+05 -14.553369 13.682167 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361427 2632 413 -1.4551E+01 9.396127 -0.244779 9.375859 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682146 13.843090 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7943445260491488 rel_E_err 8.4017507936111404D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2353033386060224E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072728186823674E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7836413276523 max c/cs inside fraction of cutoff 0.63594859289170480 average v/vesc outside cutoff 0.98545683122336647 Kinetic plus potential energy outside cutoff 4.3072728186823674E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958884490827254 check gamma integral -1.6149195284695019E-002 3820 9.396127 2.704E+05 -14.553369 13.682167 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2632 413 -1.3760E+01 9.396127 -0.244779 9.375858 13.455915 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682145 13.843089 -7.057074 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7921183066525312 rel_E_err 8.0250722146305058D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2353043714294467E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072744649293328E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7838259049608 max c/cs inside fraction of cutoff 0.63594867460814419 average v/vesc outside cutoff 0.98545703090053227 Kinetic plus potential energy outside cutoff 4.3072744649293328E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958886295592720 check gamma integral -1.6149194539942003E-002 retry: logT < hydro_mtx_min_allowed_logT 792 3828 retry: logT > hydro_mtx_max_allowed_logT 792 3830 3830 9.396127 2.704E+05 -14.553371 13.682165 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2632 415 -1.3570E+01 9.396127 -0.244779 9.375858 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 9 2.8823E+05 5.899322 6.193045 13.682143 13.843086 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7898902126465304 rel_E_err 8.2412077909052539D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204878 3.2353088419616118E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297289 4.3072815904830236E+047 Layers above q= 0.99998141641297289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7846248579324 max c/cs inside fraction of cutoff 0.63594902829716105 average v/vesc outside cutoff 0.98545789516291304 Kinetic plus potential energy outside cutoff 4.3072815904830236E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958894103306511 check gamma integral -1.6149191322927286E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3832 retry: logT > hydro_mtx_max_allowed_logT 792 3832 retry: adjust_correction failed in eval_equations -- give up in solver 3833 retry: logT < hydro_mtx_min_allowed_logT 793 3834 hydro_solver_step returned ierr -1 s% model_number 3834 nz 2632 s% num_retries 419 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 793 3834 retry: logT < hydro_mtx_min_allowed_logT 793 3834 3840 9.396127 2.704E+05 -14.553372 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 421 -1.4584E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 8 2.8823E+05 5.899322 6.193045 13.682143 13.843086 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7876682605057423 rel_E_err 8.6449033195210250D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204889 3.2353095363409532E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297300 4.3072826972907845E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7847489502203 max c/cs inside fraction of cutoff 0.63594908323731125 average v/vesc outside cutoff 0.98545802940947969 Kinetic plus potential energy outside cutoff 4.3072826972907845E+047 mass inside cutoff 1413 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958895315431329 check gamma integral -1.6149190822125254E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3844 retry: logT < hydro_mtx_min_allowed_logT 794 3846 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3850 3850 9.396127 2.704E+05 -14.553372 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 424 -1.4696E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899322 6.193045 13.682143 13.843086 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7854958359777413 rel_E_err 7.0221546755235869D-12 save photos/x850 for model 3850 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204889 3.2353098852098348E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297300 4.3072832533949448E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7848112940189 max c/cs inside fraction of cutoff 0.63594911083958083 average v/vesc outside cutoff 0.98545809686175601 Kinetic plus potential energy outside cutoff 4.3072832533949448E+047 mass inside cutoff 1413 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958895924353193 check gamma integral -1.6149190570861043E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3851 retry: logT > hydro_mtx_max_allowed_logT 796 3851 retry: logT < hydro_mtx_min_allowed_logT 797 3854 3860 9.396127 2.704E+05 -14.553372 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2634 427 -1.4807E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 4 2.8823E+05 5.899322 6.193045 13.682143 13.843086 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7833111296181396 rel_E_err 8.5505171941802353D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204866 3.2353099908787193E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297278 4.3072834218666231E+047 Layers above q= 0.99998141641297278 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7848301738356 max c/cs inside fraction of cutoff 0.63594911920138497 average v/vesc outside cutoff 0.98545811728852772 Kinetic plus potential energy outside cutoff 4.3072834218666231E+047 mass inside cutoff 1414 51.641537223927799 relax counter 0 log max v [km/s]= 4.2958896108747995 check gamma integral -1.6149190495542021E-002 3870 9.396127 2.704E+05 -14.553372 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 427 -1.4015E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899322 6.193045 13.682143 13.843085 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7811414115763444 rel_E_err 8.3418286022575530D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204889 3.2353105645669361E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297300 4.3072843363073199E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7849326966461 max c/cs inside fraction of cutoff 0.63594916459552453 average v/vesc outside cutoff 0.98545822821420503 Kinetic plus potential energy outside cutoff 4.3072843363073199E+047 mass inside cutoff 1413 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958897109995293 check gamma integral -1.6149190081366869E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3872 retry: logT < hydro_mtx_min_allowed_logT 794 3876 retry: logT > hydro_mtx_max_allowed_logT 794 3876 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3878 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 790 3880 3880 9.396127 2.704E+05 -14.553372 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 432 -1.4728E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899322 6.193045 13.682142 13.843085 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7790255394623360 rel_E_err 7.1364571442741848D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204889 3.2353113170145627E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297300 4.3072855356690387E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7850671668914 max c/cs inside fraction of cutoff 0.63594922412988586 average v/vesc outside cutoff 0.98545837368689559 Kinetic plus potential energy outside cutoff 4.3072855356690387E+047 mass inside cutoff 1413 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958898423077869 check gamma integral -1.6149189539996674E-002 retry: logT < hydro_mtx_min_allowed_logT 795 3881 retry: logT < hydro_mtx_min_allowed_logT 796 3886 retry: adjust_correction failed in eval_equations -- give up in solver 3887 retry: logT > hydro_mtx_max_allowed_logT 796 3887 3890 9.396127 2.704E+05 -14.553373 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 436 -1.5141E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899322 6.193045 13.682142 13.843085 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7769146833845566 rel_E_err 8.3305715433483893D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204889 3.2353114564001963E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297300 4.3072857578804046E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7850920725884 max c/cs inside fraction of cutoff 0.63594923516170376 average v/vesc outside cutoff 0.98545840064129664 Kinetic plus potential energy outside cutoff 4.3072857578804046E+047 mass inside cutoff 1413 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958898666260055 check gamma integral -1.6149189440601400E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 9.396127 2.704E+05 -14.553373 13.682164 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2632 436 -1.4349E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682142 13.843085 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7747902091476915 rel_E_err 7.9770998274552481D-12 save LOGS/profile42.data for model 3900 save photos/x900 for model 3900 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204889 3.2353117223916033E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297300 4.3072861818880675E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7851396047852 max c/cs inside fraction of cutoff 0.63594925621014298 average v/vesc outside cutoff 0.98545845207265803 Kinetic plus potential energy outside cutoff 4.3072861818880675E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958899130351842 check gamma integral -1.6149189248630701E-002 retry: logT > hydro_mtx_max_allowed_logT 794 3910 3910 9.396127 2.704E+05 -14.553373 13.682163 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 437 -1.3858E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899321 6.193045 13.682142 13.843084 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7727224155795138 rel_E_err 5.5237532632029642D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204900 3.2353131890201722E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297311 4.3072885195726879E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7854017114828 max c/cs inside fraction of cutoff 0.63594937224437154 average v/vesc outside cutoff 0.98545873562348796 Kinetic plus potential energy outside cutoff 4.3072885195726879E+047 mass inside cutoff 1413 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958901689044522 check gamma integral -1.6149188191415937E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3911 retry: logT < hydro_mtx_min_allowed_logT 794 3912 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3913 retry: logT < hydro_mtx_min_allowed_logT 795 3915 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3916 retry: logT < hydro_mtx_min_allowed_logT 795 3916 3920 9.396127 2.704E+05 -14.553373 13.682163 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 443 -1.4872E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682141 13.843083 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7706265416797651 rel_E_err 8.2117662567195162D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204900 3.2353135062146244E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297311 4.3072890251921565E+047 Layers above q= 0.99998141641297311 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7854583945923 max c/cs inside fraction of cutoff 0.63594939734247780 average v/vesc outside cutoff 0.98545879695187799 Kinetic plus potential energy outside cutoff 4.3072890251921565E+047 mass inside cutoff 1413 51.641537223927820 relax counter 0 log max v [km/s]= 4.2958902242300949 check gamma integral -1.6149187964441574E-002 3930 9.396127 2.704E+05 -14.553374 13.682163 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2632 443 -1.4081E+01 9.396127 -0.244779 9.375857 13.455914 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899321 6.193045 13.682141 13.843083 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7685509126559946 rel_E_err 8.1284640060370248D-12 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204889 3.2353139994718788E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297300 4.3072898114361034E+047 Layers above q= 0.99998141641297300 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7855465431574 max c/cs inside fraction of cutoff 0.63594943637163626 average v/vesc outside cutoff 0.98545889230949646 Kinetic plus potential energy outside cutoff 4.3072898114361034E+047 mass inside cutoff 1412 51.641537223927806 relax counter 0 log max v [km/s]= 4.2958903102611030 check gamma integral -1.6149187608341449E-002 3940 9.396127 2.704E+05 -14.553375 13.682161 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 443 -1.3289E+01 9.396127 -0.244779 9.375856 13.455913 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899321 6.193045 13.682140 13.843081 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7664487427063893 rel_E_err 8.0313069131150022D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204911 3.2353170534410064E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297322 4.3072946791618833E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7860923357734 max c/cs inside fraction of cutoff 0.63594967799340396 average v/vesc outside cutoff 0.98545948274005291 Kinetic plus potential energy outside cutoff 4.3072946791618833E+047 mass inside cutoff 1413 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958908427510547 check gamma integral -1.6149185410533701E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 3941 retry: logT > hydro_mtx_max_allowed_logT 795 3943 retry: adjust_correction failed in eval_equations -- give up in solver 3946 retry: logT < hydro_mtx_min_allowed_logT 794 3946 retry: adjust_correction failed in eval_equations -- give up in solver 3946 3950 9.396127 2.704E+05 -14.553376 13.682161 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361428 2633 448 -1.4002E+01 9.396127 -0.244779 9.375856 13.455913 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682139 13.843080 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7643719349182705 rel_E_err 8.3160239675914471D-12 save photos/x950 for model 3950 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204911 3.2353192307984471E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297322 4.3072981496696839E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7864814632248 max c/cs inside fraction of cutoff 0.63594985025784145 average v/vesc outside cutoff 0.98545990368225111 Kinetic plus potential energy outside cutoff 4.3072981496696839E+047 mass inside cutoff 1413 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958912222131049 check gamma integral -1.6149183842915908E-002 3960 9.396127 2.704E+05 -14.553378 13.682159 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2633 448 -1.3210E+01 9.396127 -0.244779 9.375855 13.455913 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899321 6.193045 13.682138 13.843077 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7622660094822891 rel_E_err 8.2412078117734698D-12 k, q, energy_removed_layers before adjustment is 1317 0.99999439353204911 3.2353228895876215E+047 k, q, energy_removed_layers after adjustment is 1413 0.99998141641297322 4.3073039814157669E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7871353498476 max c/cs inside fraction of cutoff 0.63595013973004655 average v/vesc outside cutoff 0.98546061102043381 Kinetic plus potential energy outside cutoff 4.3073039814157669E+047 mass inside cutoff 1413 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958918595062832 check gamma integral -1.6149181209195798E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 3962 retry: adjust_correction failed in eval_equations -- give up in solver 3963 hydro_solver_step returned ierr -1 s% model_number 3963 nz 2634 s% num_retries 450 retry: adjust_correction failed in eval_equations -- give up in solver 3963 retry: adjust_correction failed in eval_equations -- give up in solver 3964 retry: logT > hydro_mtx_max_allowed_logT 795 3965 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 3967 retry: logT > hydro_mtx_max_allowed_logT 797 3969 retry: logT < hydro_mtx_min_allowed_logT 797 3969 retry: logT < hydro_mtx_min_allowed_logT 798 3970 3970 9.396127 2.704E+05 -14.553379 13.682158 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2634 457 -1.5128E+01 9.396127 -0.244779 9.375855 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899321 6.193045 13.682137 13.843076 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7602016733600356 rel_E_err 8.5186510729734116D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204911 3.2353247747032423E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297322 4.3073069861292632E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7874722501836 max c/cs inside fraction of cutoff 0.63595028887423777 average v/vesc outside cutoff 0.98546097546585854 Kinetic plus potential energy outside cutoff 4.3073069861292632E+047 mass inside cutoff 1414 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958921876867651 check gamma integral -1.6149179850635294E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3979 3980 9.396127 2.704E+05 -14.553379 13.682158 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2635 458 -1.4637E+01 9.396127 -0.244779 9.375855 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899321 6.193045 13.682137 13.843076 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7581157689246991 rel_E_err 8.3487560445383960D-12 k, q, energy_removed_layers before adjustment is 1319 0.99999439353204922 3.2353249987747870E+047 k, q, energy_removed_layers after adjustment is 1415 0.99998141641297333 4.3073073433224778E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7875122908988 max c/cs inside fraction of cutoff 0.63595030660964014 average v/vesc outside cutoff 0.98546101879288839 Kinetic plus potential energy outside cutoff 4.3073073433224778E+047 mass inside cutoff 1415 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958922266855462 check gamma integral -1.6149179689153435E-002 3990 9.396127 2.704E+05 -14.553379 13.682158 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 458 -1.3845E+01 9.396127 -0.244779 9.375855 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 4 2.8823E+05 5.899321 6.193045 13.682137 13.843076 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7560498109963927 rel_E_err 8.3028618739176131D-12 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204911 3.2353258469480925E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297322 4.3073086952641242E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7876638701528 max c/cs inside fraction of cutoff 0.63595037371855290 average v/vesc outside cutoff 0.98546118277393691 Kinetic plus potential energy outside cutoff 4.3073086952641242E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958923743048487 check gamma integral -1.6149179079760163E-002 retry: adjust_correction failed in eval_equations -- give up in solver 3991 retry: logT > hydro_mtx_max_allowed_logT 797 3992 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 794 3995 retry: logT < hydro_mtx_min_allowed_logT 797 3996 retry: logT < hydro_mtx_min_allowed_logT 798 3998 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 9.396127 2.704E+05 -14.553379 13.682158 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 463 -1.4559E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 5 2.8823E+05 5.899321 6.193045 13.682136 13.843075 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7540266493460743 rel_E_err 8.0333851515621253D-12 save LOGS/profile43.data for model 4000 save photos/4000 for model 4000 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204911 3.2353263692154465E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297322 4.3073095277478485E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7877572040713 max c/cs inside fraction of cutoff 0.63595041504143901 average v/vesc outside cutoff 0.98546128374801722 Kinetic plus potential energy outside cutoff 4.3073095277478485E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958924651894126 check gamma integral -1.6149178703101362E-002 retry: logT > hydro_mtx_max_allowed_logT 799 4003 retry: logT < hydro_mtx_min_allowed_logT 800 4004 retry: logT < hydro_mtx_min_allowed_logT 799 4005 4010 9.396127 2.704E+05 -14.553379 13.682158 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 466 -1.4670E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682136 13.843075 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7520111777404415 rel_E_err 8.1807660596863244D-12 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204911 3.2353266001196490E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297322 4.3073098958310376E+047 Layers above q= 0.99998141641297322 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7877984660058 max c/cs inside fraction of cutoff 0.63595043331361678 average v/vesc outside cutoff 0.98546132839469835 Kinetic plus potential energy outside cutoff 4.3073098958310376E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958925053658845 check gamma integral -1.6149178536027341E-002 4020 9.396127 2.704E+05 -14.553380 13.682157 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 466 -1.3878E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682136 13.843075 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7499908557840111 rel_E_err 7.9204681718827438D-12 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204922 3.2353273865896515E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297333 4.3073111494254501E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7879390180417 max c/cs inside fraction of cutoff 0.63595049553733529 average v/vesc outside cutoff 0.98546148044729376 Kinetic plus potential energy outside cutoff 4.3073111494254501E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958926422068950 check gamma integral -1.6149177971002328E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 4024 retry: logT < hydro_mtx_min_allowed_logT 796 4027 retry: logT < hydro_mtx_min_allowed_logT 796 4027 retry: logT < hydro_mtx_min_allowed_logT 796 4027 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 798 4030 4030 9.396127 2.704E+05 -14.553380 13.682157 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 471 -1.4591E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 10 2.8823E+05 5.899321 6.193045 13.682135 13.843074 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7479613948878194 rel_E_err 8.3272810424872802D-12 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204922 3.2353288170453533E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297333 4.3073134294610978E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7881946623222 max c/cs inside fraction of cutoff 0.63595060871355846 average v/vesc outside cutoff 0.98546175699629945 Kinetic plus potential energy outside cutoff 4.3073134294610978E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958928910488261 check gamma integral -1.6149176940753660E-002 retry: logT < hydro_mtx_min_allowed_logT 799 4034 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 4037 retry: logT < hydro_mtx_min_allowed_logT 800 4039 retry: logT < hydro_mtx_min_allowed_logT 800 4040 retry: logT > hydro_mtx_max_allowed_logT 800 4040 4040 9.396127 2.704E+05 -14.553381 13.682157 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2636 476 -1.5305E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 11 2.8823E+05 5.899321 6.193045 13.682135 13.843074 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 retry log_rel_run_E_err -7.7459508897355853 rel_E_err 8.2583531925551225D-12 k, q, energy_removed_layers before adjustment is 1320 0.99999439353204922 3.2353291483097711E+047 k, q, energy_removed_layers after adjustment is 1416 0.99998141641297333 4.3073139575080566E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7882538605211 max c/cs inside fraction of cutoff 0.63595063492625425 average v/vesc outside cutoff 0.98546182104512503 Kinetic plus potential energy outside cutoff 4.3073139575080566E+047 mass inside cutoff 1416 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958929486634432 check gamma integral -1.6149176702909038E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 796 4042 4050 9.396127 2.704E+05 -14.553381 13.682157 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2635 477 -1.4814E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682135 13.843073 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7439515719313281 rel_E_err 8.7231832231175920D-12 save photos/x050 for model 4050 k, q, energy_removed_layers before adjustment is 1319 0.99999439353204922 3.2353292430028909E+047 k, q, energy_removed_layers after adjustment is 1415 0.99998141641297333 4.3073141084864909E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7882707789697 max c/cs inside fraction of cutoff 0.63595064242338117 average v/vesc outside cutoff 0.98546183936078624 Kinetic plus potential energy outside cutoff 4.3073141084864909E+047 mass inside cutoff 1415 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958929651287159 check gamma integral -1.6149176634362914E-002 4060 9.396127 2.704E+05 -14.553381 13.682156 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2634 477 -1.4022E+01 9.396127 -0.244779 9.375854 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899321 6.193045 13.682135 13.843073 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7419819107602628 rel_E_err 8.0914023193761692D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204933 3.2353298074299068E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297345 4.3073150081685317E+047 Layers above q= 0.99998141641297345 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7883716477936 max c/cs inside fraction of cutoff 0.63595068708280944 average v/vesc outside cutoff 0.98546194849663782 Kinetic plus potential energy outside cutoff 4.3073150081685317E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958930632892711 check gamma integral -1.6149176227917932E-002 retry: logT > hydro_mtx_max_allowed_logT 796 4069 4070 9.396127 2.704E+05 -14.553382 13.682155 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2635 478 -1.3531E+01 9.396127 -0.244779 9.375853 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 6 2.8823E+05 5.899320 6.193045 13.682134 13.843071 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7399865875771798 rel_E_err 8.7425800098480166D-12 k, q, energy_removed_layers before adjustment is 1319 0.99999439353204944 3.2353326653307060E+047 k, q, energy_removed_layers after adjustment is 1415 0.99998141641297356 4.3073195633959820E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7888824042664 max c/cs inside fraction of cutoff 0.63595091318879060 average v/vesc outside cutoff 0.98546250100545674 Kinetic plus potential energy outside cutoff 4.3073195633959820E+047 mass inside cutoff 1415 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958935601666246 check gamma integral -1.6149174169468889E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 797 4071 retry: logT < hydro_mtx_min_allowed_logT 798 4072 retry: logT < hydro_mtx_min_allowed_logT 796 4072 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: logT < hydro_mtx_min_allowed_logT 796 4074 retry: adjust_correction failed in eval_equations -- give up in solver 4074 retry: logT > hydro_mtx_max_allowed_logT 798 4075 4080 9.396127 2.704E+05 -14.553382 13.682155 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2635 489 -1.6051E+01 9.396127 -0.244779 9.375853 13.455912 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193045 13.682134 13.843071 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7380325485023533 rel_E_err 8.0879386123162932D-12 k, q, energy_removed_layers before adjustment is 1319 0.99999439353204944 3.2353330161723128E+047 k, q, energy_removed_layers after adjustment is 1415 0.99998141641297356 4.3073201226468398E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7889451014325 max c/cs inside fraction of cutoff 0.63595094095421689 average v/vesc outside cutoff 0.98546256883921846 Kinetic plus potential energy outside cutoff 4.3073201226468398E+047 mass inside cutoff 1415 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958936211433141 check gamma integral -1.6149173917961310E-002 4090 9.396127 2.704E+05 -14.553382 13.682155 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2634 489 -1.5259E+01 9.396127 -0.244779 9.375853 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193045 13.682134 13.843071 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7360814085055951 rel_E_err 8.0917486952237826D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353330489090062E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073201748734474E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7889509471024 max c/cs inside fraction of cutoff 0.63595094354579496 average v/vesc outside cutoff 0.98546257517729452 Kinetic plus potential energy outside cutoff 4.3073201748734474E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958936268284518 check gamma integral -1.6149173893647239E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 9.396127 2.704E+05 -14.553383 13.682155 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2634 489 -1.4467E+01 9.396127 -0.244779 9.375853 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193045 13.682134 13.843071 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7341267127135573 rel_E_err 8.3331693600271328D-12 save LOGS/profile44.data for model 4100 save photos/x100 for model 4100 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353332514601319E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073204977653072E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7889871419495 max c/cs inside fraction of cutoff 0.63595095957773318 average v/vesc outside cutoff 0.98546261434450499 Kinetic plus potential energy outside cutoff 4.3073204977653072E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958936620285044 check gamma integral -1.6149173747868076E-002 4110 9.396127 2.704E+05 -14.553383 13.682155 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361429 2634 489 -1.3675E+01 9.396127 -0.244779 9.375853 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193045 13.682133 13.843070 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7321784978715709 rel_E_err 8.3885887394857549D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353345054594267E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073224965511869E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7892112508935 max c/cs inside fraction of cutoff 0.63595105879336711 average v/vesc outside cutoff 0.98546285678173795 Kinetic plus potential energy outside cutoff 4.3073224965511869E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958938799466759 check gamma integral -1.6149172845418454E-002 retry: logT < hydro_mtx_min_allowed_logT 795 4117 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: logT < hydro_mtx_min_allowed_logT 795 4119 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 795 4119 4120 9.396127 2.704E+05 -14.553385 13.682153 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361430 2634 498 -1.5593E+01 9.396127 -0.244779 9.375852 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193045 13.682131 13.843068 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7302125573460216 rel_E_err 8.3459850970379709D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353384634728648E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073288052429841E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7899186207185 max c/cs inside fraction of cutoff 0.63595137194085138 average v/vesc outside cutoff 0.98546362196917514 Kinetic plus potential energy outside cutoff 4.3073288052429841E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958945674305582 check gamma integral -1.6149169995268789E-002 4130 9.396127 2.704E+05 -14.553385 13.682153 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361430 2634 498 -1.4801E+01 9.396127 -0.244779 9.375852 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193044 13.682131 13.843068 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7282817955672307 rel_E_err 7.9244514560928567D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353385573952908E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073289549930499E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7899354015715 max c/cs inside fraction of cutoff 0.63595137937445168 average v/vesc outside cutoff 0.98546364013591115 Kinetic plus potential energy outside cutoff 4.3073289549930499E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958945837344817 check gamma integral -1.6149169927497702E-002 4140 9.396127 2.704E+05 -14.553385 13.682153 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361430 2634 498 -1.4009E+01 9.396127 -0.244779 9.375852 13.455911 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 2 2.8823E+05 5.899320 6.193044 13.682131 13.843067 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7263370892197702 rel_E_err 8.6526967175843781D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999439353204944 3.2353391387943646E+047 k, q, energy_removed_layers after adjustment is 1414 0.99998141641297356 4.3073298817277654E+047 Layers above q= 0.99998141641297356 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7900393041864 max c/cs inside fraction of cutoff 0.63595142537903715 average v/vesc outside cutoff 0.98546375254361585 Kinetic plus potential energy outside cutoff 4.3073298817277654E+047 mass inside cutoff 1414 51.641537223927834 relax counter 0 log max v [km/s]= 4.2958946846774166 check gamma integral -1.6149169509482156E-002 4150 9.396126 2.704E+05 -14.553387 13.682151 51.642497 0.000000 0.000000 0.000000 0.214776 -1.361430 2632 498 -1.3217E+01 9.396126 -0.244779 9.375851 13.455910 -99.000000 51.642497 0.000000 0.045380 0.785224 0.609292 3 2.8823E+05 5.899320 6.193044 13.682130 13.843065 -7.057073 48.983269 0.000005 0.000002 0.436336 -0.841E+01 max increase log_rel_run_E_err -7.7244118781429245 rel_E_err 8.3575885350589853D-12 save photos/x150 for model 4150 k, q, energy_removed_layers before adjustment is 1316 0.99999439353204922 3.2353427385153128E+047 k, q, energy_removed_layers after adjustment is 1412 0.99998141641297333 4.3073356193453970E+047 Layers above q= 0.99998141641297333 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4296875000000 max vel inside fraction of cutoff 1768.7906826417050 max c/cs inside fraction of cutoff 0.63595171017914265 average v/vesc outside cutoff 0.98546444845667303 Kinetic plus potential energy outside cutoff 4.3073356193453970E+047 mass inside cutoff 1412 51.641537223927827 relax counter 0 log max v [km/s]= 4.2958953094346395 check gamma integral -1.6149166917781142E-002 retry: logT < hydro_mtx_min_allowed_logT 793 4152 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 792 4153 retry: adjust_correction failed in eval_equations -- give up in solver 4153 num_retries 501 max_number_retries 500 stopping because of problems -- too many retries terminated evolution: nonzero_ierr termination code: max_number_retries runtime (minutes), retries, steps 58.60 501 4153 DATE: 2026-11-20 TIME: 09:34:43 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************