DATE: 2026-11-02 TIME: 20:17:33 run inlist_pulses_header DATE: 2026-11-02 TIME: 20:17:34 reading user weak rate file /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number 69c020145 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 create rate data for r1216_to_mg24 create rate data for r1216_to_si28 create rate data for ral27pa_aux create rate data for ral27pg_aux create rate data for rmg24ap_aux create rate data for rmg24ap_to_si28 create rate data for rmg24gp_aux create rate data for rmg24gp_to_ne20 create rate data for rne20gp_aux create rate data for rne20gp_to_o16 create rate data for ro16gp_to_c12 create rate data for rsi28gp_aux create rate data for rsi28gp_to_mg24 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r1216_to_mg24_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r1216_to_si28_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/ral27pa_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/ral27pg_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rmg24ap_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rmg24ap_to_si28_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rmg24gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rmg24gp_to_ne20_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rne20gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rne20gp_to_o16_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/ro16gp_to_c12_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rsi28gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/rsi28gp_to_mg24_1.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/eosDT_data/cache/mesa-FreeEOS_70z00x.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/eosDT_data/cache/mesa-FreeEOS_80z00x_CO.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_co_z0.004_x0.03.bin set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9271523184879401E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1591 1600 8.573485 1.604E+05 -15.146670 5.678378 51.847958 0.000000 0.000000 0.000000 0.221655 -4.701836 1293 0 1.4416E+00 8.573485 0.312633 -2.223064 4.301971 -99.000000 51.847958 0.000035 0.799864 0.778345 0.153733 4 2.8470E+05 3.071950 6.401317 5.678378 -48.564577 -8.406569 49.154199 0.153094 0.041154 0.000000 -0.209E-07 lg_XHe_cntr log_rel_run_E_err -11.6103647697109924 rel_E_err 2.4526480386219802D-12 save LOGS/profile2.data for model 1600 save photos/x600 for model 1600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8942111152909570E-002 1610 8.585202 1.623E+05 -14.263404 4.683771 51.847958 0.000000 0.000000 0.000000 0.221655 -4.663901 1285 0 9.2080E-01 8.585202 0.303640 -5.974785 4.388361 -99.000000 51.847958 0.000002 0.799775 0.778345 0.153780 5 2.8484E+05 3.107272 6.403189 4.683771 -46.529004 -8.382493 49.154199 0.153082 0.041270 0.000000 -0.235E-07 lg_XHe_cntr log_rel_run_E_err -11.6421857345310027 rel_E_err 2.2793670476134778D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8818861848812706E-002 1620 8.598179 1.643E+05 -19.700087 2.304512 51.847958 0.000000 0.000000 0.000000 0.221655 -4.621925 1290 0 1.3418E+00 8.598179 0.294034 -6.792091 4.483962 -99.000000 51.847958 0.000000 0.799770 0.778345 0.153807 5 2.8499E+05 3.146412 6.405315 2.304512 -44.337898 -8.355703 49.154199 0.153082 0.041276 0.000000 -0.222E-07 lgRho_cntr log_rel_run_E_err -11.6344536345520861 rel_E_err 2.3203118897473052D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8679858596585121E-002 1630 8.616533 1.670E+05 -19.626192 -0.501095 51.847958 0.000000 0.000000 0.000000 0.221655 -4.562620 1398 0 1.3037E+00 8.616533 0.281264 -6.085034 4.619078 -99.000000 51.847958 0.000000 0.799770 0.778345 0.153847 5 2.8520E+05 3.201812 6.408464 -0.501096 -41.348594 -8.319104 49.154199 0.153082 0.041276 0.000000 -0.195E-07 lgRho_cntr log_rel_run_E_err -11.5776827361430090 rel_E_err 2.6443398135957957D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8477548211385925E-002 1640 8.634711 1.692E+05 -21.604767 -0.146468 51.847958 0.000000 0.000000 0.000000 0.221655 -4.504116 1567 0 1.3058E+00 8.634711 0.271943 -5.410115 4.753339 -99.000000 51.847958 0.000000 0.799770 0.778345 0.153884 5 2.8542E+05 3.256663 6.411720 -0.146470 -38.505326 -8.519591 49.154199 0.153082 0.041276 0.000000 -0.144E-07 lgRho_cntr log_rel_run_E_err -11.5260609448688580 rel_E_err 2.9780984813212649D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8269932343718541E-002 1650 8.652731 1.728E+05 -21.359662 0.198120 51.833222 0.000000 0.000000 0.000000 0.221550 -4.446035 1566 0 1.3165E+00 8.652731 0.252499 -4.780398 4.887298 -4.181423 51.833222 0.000000 0.799770 0.778450 0.153935 5 2.8564E+05 3.311159 6.410055 0.198115 -35.799229 -8.440490 49.154199 0.153082 0.041276 0.000000 -0.157E-07 lgRho_cntr log_rel_run_E_err -11.5276570093038231 rel_E_err 2.9671738352389329D-12 save photos/x650 for model 1650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8063112648838488E-002 1660 8.671171 1.756E+05 -20.673048 0.545906 51.817708 0.000000 0.000000 0.000000 0.221419 -4.386527 1580 0 1.4027E+00 8.671171 0.240022 -4.160712 5.026713 -4.177138 51.817708 0.000000 0.799770 0.778581 0.154002 5 2.8588E+05 3.367045 6.412848 0.545897 -33.141178 -8.409436 49.154199 0.153082 0.041276 0.000000 -0.135E-07 max increase log_rel_run_E_err -11.5196291701029132 rel_E_err 3.0225314599256937D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7844089878268041E-002 1670 8.689256 1.782E+05 -21.702694 0.882262 51.802073 0.000000 0.000000 0.000000 0.221268 -4.327968 1589 0 1.4074E+00 8.689256 0.228815 -3.576361 5.168279 -4.172112 51.802073 0.000000 0.799770 0.778732 0.154089 5 2.8611E+05 3.422032 6.415725 0.882247 -30.638876 -8.381860 49.154199 0.153082 0.041276 0.000000 -0.119E-07 max increase log_rel_run_E_err -11.5343402554589840 rel_E_err 2.9218622977389195D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7621884014392567E-002 1680 8.708160 1.807E+05 -19.356997 1.230024 51.785315 0.000000 0.000000 0.000000 0.221122 -4.265351 1615 0 1.4055E+00 8.708160 0.217909 -2.987734 5.326748 -4.166403 51.785315 0.000000 0.799770 0.778878 0.154263 5 2.8636E+05 3.480215 6.418803 1.229998 -28.123916 -8.355277 49.136726 0.153082 0.041276 0.000000 -0.108E-07 lgRho_cntr log_rel_run_E_err -11.4719353592222184 rel_E_err 3.3733751453877115D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7380790063128106E-002 1690 8.724728 1.829E+05 -20.934325 1.530002 51.770490 0.000000 0.000000 0.000000 0.221006 -4.210431 1666 0 1.3237E+00 8.724728 0.209040 -2.493279 5.479749 -4.161217 51.770490 0.000000 0.799770 0.778994 0.154428 5 2.8658E+05 3.531313 6.421508 1.529961 -26.009969 -8.334112 49.136726 0.153082 0.041276 0.000000 -0.982E-08 lgRho_cntr log_rel_run_E_err -11.5129874567859378 rel_E_err 3.0691106286048321D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7163173317843317E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.740857 1.849E+05 -20.478719 1.818803 51.756106 0.000000 0.000000 0.000000 0.220883 -4.155429 1678 0 1.3084E+00 8.740857 0.200940 -2.029230 5.648282 -4.156183 51.756106 0.000000 0.799770 0.779117 0.154677 5 2.8678E+05 3.581801 6.424136 1.818741 -24.025584 -8.315334 49.136726 0.153082 0.041276 0.000000 -0.924E-08 lgRho_cntr log_rel_run_E_err -11.5066198350014943 rel_E_err 3.1144414086848760D-12 save LOGS/profile3.data for model 1700 save photos/x700 for model 1700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6944795634653987E-002 1710 8.756740 1.868E+05 -20.837318 2.099891 51.742321 0.000000 0.000000 0.000000 0.220747 -4.098481 1676 0 1.2768E+00 8.756740 0.193392 -1.588785 5.838441 -4.151181 51.742321 0.000000 0.799770 0.779253 0.155075 5 2.8698E+05 3.632800 6.426685 2.099802 -22.139558 -8.298274 49.136726 0.153081 0.041277 0.000000 -0.908E-08 lgRho_cntr log_rel_run_E_err -11.5170434035679765 rel_E_err 3.0405811335700873D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6723139895819651E-002 1720 8.772224 1.886E+05 -20.455185 2.369748 51.729737 0.000000 0.000000 0.000000 0.220571 -4.038372 1690 0 1.2201E+00 8.772224 0.186296 -1.175255 6.048979 -4.146364 51.729737 0.000000 0.799770 0.779429 0.155711 5 2.8716E+05 3.684576 6.429098 2.369624 -20.363310 -8.282158 49.136726 0.153081 0.041277 0.000000 -0.963E-08 lgRho_cntr log_rel_run_E_err -11.3533643014241648 rel_E_err 4.4323668548959017D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6500344442519798E-002 1730 8.787140 1.903E+05 -19.988845 2.625389 51.719003 0.000000 0.000000 0.000000 0.220337 -3.973934 1727 0 1.1309E+00 8.787140 0.179478 -0.791734 6.273301 -4.141922 51.719003 0.000000 0.799770 0.779663 0.156673 5 2.8731E+05 3.737347 6.431311 2.625223 -18.707883 -8.265832 49.136726 0.153080 0.041278 0.000000 -0.113E-07 lgRho_cntr log_rel_run_E_err -11.5054696969190680 rel_E_err 3.1227002863534228D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6278969465163730E-002 1740 8.801385 1.920E+05 -20.652111 2.871198 51.710539 0.000000 0.000000 0.000000 0.220101 -3.904682 1722 0 1.0081E+00 8.801385 0.172707 -0.438960 6.502649 -4.138024 51.710539 0.000000 0.799768 0.779899 0.158008 4 2.8742E+05 3.791138 6.433279 2.870985 -17.176089 -8.248041 49.136726 0.153078 0.041281 0.000000 -0.150E-07 lgRho_cntr log_rel_run_E_err -10.9615508984225780 rel_E_err 1.0925695727720337D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6060839029067463E-002 1750 8.814975 1.937E+05 -20.566720 3.123686 51.704327 0.000000 0.000000 0.000000 0.219889 -3.831102 1734 0 8.5763E-01 8.814975 0.165767 -0.114118 6.730315 -4.134615 51.704327 0.000000 0.799766 0.780111 0.159697 5 2.8751E+05 3.845754 6.434996 3.123434 -15.757947 -8.227814 49.136726 0.153074 0.041289 0.000000 -0.217E-07 lgRho_cntr log_rel_run_E_err -11.5120932919105474 rel_E_err 3.0754361014686526D-12 save photos/x750 for model 1750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5845945057280089E-002 1760 8.828035 1.955E+05 -20.427720 3.402379 51.700008 0.000000 0.000000 0.000000 0.219724 -3.754288 1731 0 6.8855E-01 8.828035 0.158530 0.187994 6.953151 -4.131743 51.700008 0.000000 0.799760 0.780276 0.161670 4 2.8757E+05 3.900921 6.436489 3.402114 -14.434216 -8.204722 49.136726 0.153065 0.041303 0.000000 -0.331E-07 lgRho_cntr log_rel_run_E_err -11.5015898024443040 rel_E_err 3.1507228134061729D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5632452790659139E-002 1770 8.840720 1.974E+05 -19.326296 3.716314 51.697104 0.000000 0.000000 0.000000 0.219604 -3.675398 1736 0 5.0898E-01 8.840720 0.150945 0.472935 7.170549 -4.129251 51.697104 0.000000 0.799749 0.780396 0.163849 5 2.8761E+05 3.956395 6.437802 3.716066 -13.184181 -8.178660 49.136726 0.153049 0.041330 0.000000 -0.521E-07 lgRho_cntr log_rel_run_E_err -11.5302138415849278 rel_E_err 2.9497564430385583D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5417459967146911E-002 1780 8.853170 1.993E+05 -20.058663 4.062548 51.694837 0.000000 0.000000 0.000000 0.219506 -3.595366 1765 0 3.2479E-01 8.853170 0.142924 0.744949 7.382888 -4.136768 51.694837 0.000000 0.799730 0.780494 0.166166 5 2.8763E+05 4.012004 6.438412 4.062339 -11.990846 -8.459468 49.136726 0.153020 0.041378 0.000000 0.442E-06 lgRho_cntr log_rel_run_E_err -11.5161156774068321 rel_E_err 3.0470832693495638D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5197941149570861E-002 1790 8.865513 2.012E+05 -20.978235 4.433259 51.693445 0.000000 0.000000 0.000000 0.219443 -3.514818 1775 0 1.3764E-01 8.865513 0.135271 1.008069 7.591021 -4.127339 51.693445 0.000000 0.799696 0.780557 0.168573 5 2.8765E+05 4.067691 6.439390 4.433095 -10.840221 -8.491841 49.136726 0.152968 0.041462 0.000000 -0.960E-07 lgRho_cntr log_rel_run_E_err -11.5279417240859470 rel_E_err 2.9652292528615548D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4970188962229748E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.877820 2.032E+05 -21.034558 4.819976 51.692629 0.000000 0.000000 0.000000 0.219405 -3.434250 1774 0 -4.9007E-02 8.877820 0.126881 1.264354 7.795350 -4.125877 51.692629 0.000000 0.799638 0.780595 0.171033 4 2.8766E+05 4.123361 6.440414 4.819855 -9.724202 -8.469770 49.136726 0.152879 0.041608 0.000000 -0.154E-06 lgRho_cntr log_rel_run_E_err -11.5266711178698635 rel_E_err 2.9739172645851240D-12 save LOGS/profile4.data for model 1800 save photos/x800 for model 1800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4731004694902335E-002 1810 8.890145 2.054E+05 -20.922649 5.216284 51.692095 0.000000 0.000000 0.000000 0.219380 -3.353931 1791 0 -2.3449E-01 8.890145 0.118110 1.515331 7.996347 -4.124658 51.692095 0.000000 0.799539 0.780620 0.173528 5 2.8767E+05 4.178988 6.441347 5.216197 -8.636064 -8.445828 49.136726 0.152728 0.041857 0.000000 -0.240E-06 lgRho_cntr log_rel_run_E_err -11.5208343567104308 rel_E_err 3.0141554272744356D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4476704365311773E-002 1820 8.902530 2.077E+05 -20.886865 5.617808 51.691746 0.000000 0.000000 0.000000 0.219364 -3.274097 1799 0 -4.1794E-01 8.902530 0.109082 1.761770 8.194066 -4.123343 51.691746 0.000000 0.799369 0.780636 0.176046 5 2.8767E+05 4.234547 6.442223 5.617748 -7.572761 -8.420710 49.136726 0.152470 0.042281 0.000000 -0.372E-06 lgRho_cntr log_rel_run_E_err -11.5167691814957198 rel_E_err 3.0425016225161484D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4203462039554872E-002 1830 8.915007 2.100E+05 -20.178029 6.022210 51.691515 0.000000 0.000000 0.000000 0.219353 -3.194883 1811 0 -5.9903E-01 8.915007 0.099846 2.004486 8.388785 -4.122382 51.691515 0.000000 0.799081 0.780647 0.178587 5 2.8767E+05 4.290030 6.443061 6.022169 -6.530273 -8.394735 49.136726 0.152030 0.043003 0.000001 -0.567E-06 lgRho_cntr log_rel_run_E_err -11.5157087333887578 rel_E_err 3.0499397952623434D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3906421687052874E-002 1840 8.927600 2.124E+05 -19.247049 6.427866 51.691363 0.000000 0.000000 0.000000 0.219346 -3.116451 1821 0 -7.7703E-01 8.927600 0.090433 2.243985 8.580639 -4.121585 51.691363 0.000000 0.798588 0.780654 0.181164 5 2.8768E+05 4.345411 6.443873 6.427838 -5.505427 -8.367836 49.136726 0.151281 0.044234 0.000001 -0.855E-06 lgRho_cntr log_rel_run_E_err -11.5227242562590657 rel_E_err 3.0010673621842084D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3579979292767537E-002 1850 8.940343 2.148E+05 -18.160848 6.833914 51.691261 0.000000 0.000000 0.000000 0.219341 -3.038970 1829 0 -9.5148E-01 8.940343 0.080852 2.480834 8.769896 -4.120326 51.691261 0.000000 0.797748 0.780659 0.183806 5 2.8768E+05 4.400677 6.444663 6.833895 -4.494105 -8.339735 49.136726 0.150001 0.046336 0.000002 -0.128E-05 lgRho_cntr log_rel_run_E_err -11.5203419346266944 rel_E_err 3.0175749467996661D-12 save photos/x850 for model 1850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3217158385588227E-002 1860 8.953282 2.173E+05 -17.013567 7.239885 51.691192 0.000000 0.000000 0.000000 0.219337 -2.962685 1842 0 -1.1216E+00 8.953282 0.071109 2.715729 8.956971 -4.119225 51.691192 0.000000 0.796312 0.780663 0.186567 5 2.8768E+05 4.455803 6.445448 7.239872 -3.490597 -8.310217 49.136726 0.147812 0.049930 0.000003 -0.191E-05 lgRho_cntr log_rel_run_E_err -11.5374663526302186 rel_E_err 2.9009059403785955D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2809201535742969E-002 1870 8.966490 2.186E+05 -15.877748 7.645298 51.691176 0.000000 0.000000 0.000000 0.219336 -2.887982 1842 0 -1.2865E+00 8.966490 0.068898 2.949604 9.142479 -99.000000 51.691176 0.000000 0.793861 0.780664 0.189548 5 2.8768E+05 4.510755 6.451418 7.645289 -2.486622 -8.334455 49.136726 0.144070 0.056060 0.000006 -0.227E-05 lgRho_cntr log_rel_run_E_err -11.5293374678126046 rel_E_err 2.9557148406301444D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2344906188161530E-002 1880 8.980052 2.211E+05 -14.754446 8.049559 51.691176 0.000000 0.000000 0.000000 0.219336 -2.815519 1864 0 -1.4442E+00 8.980052 0.059738 3.183871 9.327450 -99.000000 51.691176 0.000000 0.789710 0.780664 0.192927 5 2.8768E+05 4.565401 6.452543 8.049553 -1.470248 -8.306560 49.136726 0.137712 0.066445 0.000011 -0.370E-05 lgRho_cntr log_rel_run_E_err -11.5243134241844771 rel_E_err 2.9901059405895314D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1809137523733164E-002 1890 8.994203 2.238E+05 -13.644227 8.451519 51.691176 0.000000 0.000000 0.000000 0.219336 -2.745878 1875 0 -1.5930E+00 8.994203 0.049819 3.420999 9.513710 -99.000000 51.691176 0.000000 0.782814 0.780664 0.197000 6 2.8768E+05 4.619906 6.453537 8.451515 -0.425304 -8.273972 49.136726 0.127090 0.083698 0.000021 -0.547E-05 lgRho_cntr log_rel_run_E_err -11.5369723219684932 rel_E_err 2.9042077366959793D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1179684720632347E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 9.003050 2.255E+05 -18.719828 8.690277 51.691176 0.000000 0.000000 0.000000 0.219336 -2.705643 1890 0 -1.9666E+00 9.003050 0.043613 3.565744 9.626959 -99.000000 51.691176 0.000000 0.776870 0.780664 0.199945 6 2.8768E+05 4.652589 6.454130 8.690274 0.221403 -8.253025 49.136726 0.117875 0.098569 0.000031 -0.683E-05 max increase log_rel_run_E_err -11.4727479557389209 rel_E_err 3.3670692167609516D-12 save LOGS/profile5.data for model 1900 save photos/x900 for model 1900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0744647701421513E-002 1910 9.016933 2.281E+05 -19.074571 9.038998 51.691176 0.000000 0.000000 0.000000 0.219336 -2.647403 1881 0 -1.8047E+00 9.016933 0.033839 3.788198 9.800022 -99.000000 51.691176 0.000000 0.764733 0.780664 0.205370 5 2.8768E+05 4.701813 6.455027 9.038996 1.224544 -8.219542 49.136726 0.098862 0.128938 0.000056 -0.934E-05 lgRho_cntr log_rel_run_E_err -11.5336496644587196 rel_E_err 2.9265121771361849D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9989521443601503E-002 1920 9.032491 2.312E+05 -19.613589 9.388400 51.691176 0.000000 0.000000 0.000000 0.219336 -2.584655 1862 0 -1.9379E+00 9.032491 0.022732 4.034589 9.990284 -99.000000 51.691176 0.000000 0.748324 0.780664 0.212627 5 2.8768E+05 4.755930 6.456011 9.388398 2.330941 -8.181240 49.136726 0.072694 0.169998 0.000102 -0.129E-04 lgRho_cntr log_rel_run_E_err -11.5202784342837319 rel_E_err 3.0180161936064807D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9011545543261555E-002 1930 9.047475 2.343E+05 -19.641982 9.682319 51.691176 0.000000 0.000000 0.000000 0.219336 -2.518333 1811 0 -2.0910E+00 9.047475 0.011730 4.273561 10.173368 -99.000000 51.691176 0.000000 0.732945 0.780664 0.220305 5 2.8768E+05 4.810597 6.456979 9.682318 3.371946 -8.143510 49.136726 0.047600 0.208486 0.000162 -0.176E-04 lgRho_cntr log_rel_run_E_err -11.5436575862954882 rel_E_err 2.8598444610279649D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.7896758043144116E-002 1940 9.061265 2.372E+05 -13.874217 9.918725 51.691176 0.000000 0.000000 0.000000 0.219336 -2.446747 1759 0 -2.2517E+00 9.061265 0.001284 4.495692 10.342182 -99.000000 51.691176 0.000000 0.721977 0.780664 0.227225 3 2.8768E+05 4.865437 6.457880 9.918724 4.294123 -8.107891 49.136726 0.029277 0.235939 0.000221 -0.238E-04 lgRho_cntr log_rel_run_E_err -11.4637390264721422 rel_E_err -3.4376445863773387D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6691464612416340E-002 1950 9.074092 2.400E+05 -12.526278 10.114388 51.691176 0.000000 0.000000 0.000000 0.219336 -2.371728 1718 0 -2.4067E+00 9.074092 -0.008462 4.701225 10.497142 -99.000000 51.691176 0.000000 0.715199 0.780664 0.233083 3 2.8768E+05 4.920065 6.458755 10.114386 5.109442 -8.075054 49.136726 0.017713 0.252903 0.000268 -0.312E-04 lgRho_cntr log_rel_run_E_err -11.4473283300983404 rel_E_err -3.5700283910524614D-12 save photos/x950 for model 1950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5413192268108046E-002 1960 9.086389 2.427E+05 -17.849876 10.285689 51.691176 0.000000 0.000000 0.000000 0.219336 -2.295287 1681 0 -2.5508E+00 9.086389 -0.017766 4.894779 10.641987 -99.000000 51.691176 0.000000 0.711177 0.780664 0.238100 5 2.8768E+05 4.974381 6.459608 10.285687 5.851446 -8.043995 49.136726 0.010721 0.262965 0.000304 -0.422E-04 lgRho_cntr log_rel_run_E_err -11.5468774098247184 rel_E_err 2.8387202131491740D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.4052144891228653E-002 1970 9.098499 2.454E+05 -12.775797 10.442861 51.691176 0.000000 0.000000 0.000000 0.219336 -2.218511 1645 0 -2.6905E+00 9.098499 -0.026737 5.080485 10.780004 -99.000000 51.691176 0.000000 0.708796 0.780664 0.242535 3 2.8768E+05 5.028521 6.460466 10.442859 6.546809 -8.014415 49.136726 0.006507 0.268912 0.000331 -0.539E-04 lgRho_cntr log_rel_run_E_err -11.7009197181371896 rel_E_err 1.9910413605551141D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2592264013785920E-002 1980 9.110602 2.480E+05 -18.074959 10.591189 51.691176 0.000000 0.000000 0.000000 0.219336 -2.142137 1584 0 -2.8240E+00 9.110602 -0.035424 5.260435 10.912880 -99.000000 51.691176 0.000000 0.707389 0.780664 0.246561 6 2.8768E+05 5.082485 6.461313 10.591187 7.209760 -7.986075 49.136726 0.003955 0.272419 0.000353 -0.631E-04 lgRho_cntr log_rel_run_E_err -11.2950646752235624 rel_E_err 5.0691521273570488D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.1026279279004636E-002 1990 9.122813 2.505E+05 -17.929392 10.734198 51.691176 0.000000 0.000000 0.000000 0.219336 -2.066398 1559 0 -2.9542E+00 9.122813 -0.043978 5.436520 11.042097 -99.000000 51.691176 0.000000 0.706581 0.780664 0.250294 5 2.8768E+05 5.136380 6.462246 10.734196 7.851160 -7.958863 49.136726 0.002400 0.274419 0.000373 -0.960E-04 lgRho_cntr log_rel_run_E_err -11.5616760596745021 rel_E_err 2.7436198754041649D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.9345461332101735E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 9.135282 2.531E+05 -16.795444 10.873558 51.691176 0.000000 0.000000 0.000000 0.219336 -1.991382 1522 0 -3.0897E+00 9.135282 -0.052409 5.609203 11.168042 -99.000000 51.691176 0.000000 0.706222 0.780664 0.253792 5 2.8768E+05 5.190435 6.463172 10.873556 8.473646 -7.932336 49.136726 0.001451 0.275293 0.000397 -0.122E-03 lgRho_cntr log_rel_run_E_err -11.5535732606790003 rel_E_err 2.7952891534223837D-12 save LOGS/profile6.data for model 2000 save photos/2000 for model 2000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7553369053039692E-002 2010 9.147807 2.557E+05 -12.284900 11.011273 51.691176 0.000000 0.000000 0.000000 0.219336 -1.917840 1458 0 -3.2086E+00 9.147807 -0.060882 5.779705 11.291734 -99.000000 51.691176 0.000000 0.706424 0.780664 0.257103 3 2.8768E+05 5.243974 6.464115 11.011270 9.083581 -7.906010 49.136726 0.000871 0.274770 0.000441 -0.167E-03 lgRho_cntr log_rel_run_E_err -10.9441004862848388 rel_E_err 1.1373640940948754D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.5645856210525161E-002 2020 9.162260 2.588E+05 -16.142210 11.169407 51.691176 0.000000 0.000000 0.000000 0.219336 -1.836335 1425 0 -3.3438E+00 9.162260 -0.070665 5.973788 11.431722 -99.000000 51.691176 0.000000 0.708276 0.780664 0.260637 5 2.8768E+05 5.304345 6.465232 11.169404 9.770029 -7.876052 49.136726 0.000481 0.270172 0.000584 -0.225E-03 lgRho_cntr log_rel_run_E_err -11.4275951009929155 rel_E_err 3.7359830656615099D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.3315251436314119E-002 retry: check_lgL_power_photo_change hard limit 2025 2030 9.172121 2.608E+05 -11.760192 11.277146 51.691176 0.000000 0.000000 0.000000 0.219336 -1.784770 1406 1 -3.6794E+00 9.172121 -0.077036 6.100984 11.523062 -99.000000 51.691176 0.000000 0.711862 0.780664 0.262738 3 2.8768E+05 5.343824 6.465994 11.277143 10.212250 -7.856843 49.136726 0.000321 0.261357 0.000868 -0.288E-03lgL_power_phot log_rel_run_E_err -12.0183937476721443 rel_E_err 9.5853119709690830D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.1700884589628822E-002 2040 9.179995 2.624E+05 -17.147298 11.364399 51.691176 0.000000 0.000000 0.000000 0.219336 -1.746849 1390 1 -3.7447E+00 9.179995 -0.081986 6.200161 11.594057 -99.000000 51.691176 0.000000 0.717553 0.780664 0.264187 6 2.8768E+05 5.373970 6.466631 11.364396 10.550421 -7.842175 49.136726 0.000231 0.247486 0.001433 -0.326E-03lgL_power_phot log_rel_run_E_err -11.5858887367206425 rel_E_err 2.5948440582907866D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0398491165336468E-002 2050 9.188081 2.639E+05 -10.864152 11.455482 51.691176 0.000000 0.000000 0.000000 0.219336 -1.712170 1363 1 -3.8036E+00 9.188081 -0.086578 6.299619 11.665036 -99.000000 51.691176 0.000000 0.727833 0.780664 0.265386 3 2.8768E+05 5.403121 6.467234 11.455479 10.879346 -7.828679 49.136726 0.000162 0.222761 0.002867 -0.354E-03lgL_power_phot log_rel_run_E_err -11.4982212250480025 rel_E_err -3.1752562164565173D-12 save photos/x050 for model 2050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.9057634939263806E-002 2060 9.196418 2.655E+05 -10.139698 11.551219 51.691176 0.000000 0.000000 0.000000 0.219336 -1.681877 1347 1 -3.8518E+00 9.196418 -0.091656 6.399618 11.736190 -99.000000 51.691176 0.000000 0.744828 0.780664 0.266271 3 2.8768E+05 5.430846 6.467877 11.551216 11.192781 -7.813712 49.136726 0.000110 0.182849 0.006532 -0.400E-03lgL_power_phot log_rel_run_E_err -11.5944610993533175 rel_E_err -2.5441276656524760D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.7677926087218493E-002 2070 9.205003 2.673E+05 -9.732616 11.650581 51.691176 0.000000 0.000000 0.000000 0.219336 -1.655300 1335 1 -3.8832E+00 9.205003 -0.096960 6.501222 11.808279 -99.000000 51.691176 0.000000 0.768960 0.780664 0.266927 3 2.8768E+05 5.457422 6.468533 11.650578 11.482037 -7.798094 49.136726 0.000070 0.128584 0.014982 -0.477E-03lgL_power_phot log_rel_run_E_err -12.3826211212394632 rel_E_err -4.1436100596850907D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.6247648427426150E-002 2080 9.214145 2.691E+05 -9.509120 11.753540 51.691176 0.000000 0.000000 0.000000 0.219336 -1.626516 1321 1 -3.8136E+00 9.214145 -0.102667 6.610426 11.885516 -99.000000 51.691176 0.000000 0.796741 0.780664 0.267765 3 2.8768E+05 5.485922 6.469236 11.753536 11.745845 -7.781372 49.136726 0.000038 0.070699 0.030792 -0.506E-03 max increase log_rel_run_E_err -11.2215623704114602 rel_E_err 6.0039577796900750D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.4683393788954278E-002 2090 9.227309 2.720E+05 -16.751409 11.894168 51.691176 0.000000 0.000000 0.000000 0.219336 -1.571278 1292 1 -3.7875E+00 9.227309 -0.111424 6.774735 12.001108 -99.000000 51.691176 0.000000 0.825118 0.780664 0.270049 6 2.8768E+05 5.532895 6.470306 11.894165 12.047783 -7.755906 49.136726 0.000011 0.019583 0.057019 -0.641E-03 lgRho_cntr log_rel_run_E_err -11.2991109107317733 rel_E_err 5.0221431694969367D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.2290959303922202E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2099 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.239475 2.740E+05 -12.017532 12.029061 51.691176 0.000000 0.000000 0.000000 0.219336 -1.506957 1668 1 -5.4991E+00 9.239475 -0.120212 6.934209 12.112746 -99.000000 51.691176 0.000000 0.836011 0.780664 0.273033 6 2.8768E+05 5.582058 6.465219 12.029058 12.269962 -7.554852 49.152015 0.000002 0.003514 0.071244 -0.287E-01 lgRho_cntr log_rel_run_E_err -11.5738849715852918 rel_E_err 2.6675651094938283D-12 save LOGS/profile7.data for model 2100 save photos/x100 for model 2100 check gamma integral 9.9389266105142406E-003 2110 9.240690 2.732E+05 -13.064231 12.045535 51.691176 0.000000 0.000000 0.000000 0.219336 -1.500779 2538 1 -4.7073E+00 9.240690 -0.114508 6.950804 12.124198 -99.000000 51.691176 0.000000 0.836501 0.780664 0.273294 5 2.8768E+05 5.586864 6.471480 12.045532 12.292122 -7.872762 49.152015 0.000001 0.002854 0.071960 0.916E-03 max increase log_rel_run_E_err -10.5461427786882780 rel_E_err 2.6139938670295401D-12 check gamma integral 9.6954185034169530E-003 2120 9.248292 2.748E+05 -10.060677 12.120069 51.691176 0.000000 0.000000 0.000000 0.219336 -1.457966 2538 1 -3.9155E+00 9.248292 -0.119083 7.046697 12.191104 -99.000000 51.691176 0.000000 0.838258 0.780664 0.275277 5 2.8768E+05 5.618739 6.472761 12.120066 12.390157 -7.864650 49.152015 0.000000 0.000524 0.074672 -0.925E-03 lgRho_cntr log_rel_run_E_err -10.2628961419304208 rel_E_err 2.6168190212001241D-12 check gamma integral 8.2731364367472152E-003 2130 9.261823 2.779E+05 -10.686381 12.257659 51.691176 0.000000 0.000000 0.000000 0.219336 -1.383849 2539 1 -4.1669E+00 9.261823 -0.127974 7.212469 12.306256 -99.000000 51.691176 0.000000 0.838501 0.780664 0.278588 5 2.8768E+05 5.674623 6.474021 12.257655 12.546317 -7.843950 49.152015 0.000000 0.000014 0.075508 -0.125E-02 lgRho_cntr log_rel_run_E_err -10.0888153607380247 rel_E_err 2.7707875482012719D-12 check gamma integral 5.8239228764253130E-003 2140 9.275252 2.808E+05 -8.198633 12.392933 51.691176 0.000000 0.000000 0.000000 0.219336 -1.314291 2542 1 -4.2953E+00 9.275252 -0.136345 7.370957 12.416128 -99.000000 51.691176 0.000000 0.838120 0.780664 0.281609 5 2.8768E+05 5.728431 6.475331 12.392929 12.685970 -7.825383 49.152015 0.000000 0.000011 0.076055 -0.162E-02 lgRho_cntr log_rel_run_E_err -9.9618282578891275 rel_E_err 2.8341709639144134D-12 check gamma integral 3.5082443410302433E-003 2150 9.289058 2.837E+05 -7.780157 12.530080 51.691176 0.000000 0.000000 0.000000 0.219336 -1.246769 2545 1 -4.4192E+00 9.289058 -0.144634 7.528780 12.525548 -99.000000 51.691176 0.000000 0.837170 0.780664 0.284559 5 2.8768E+05 5.782108 6.476702 12.530075 12.822316 -7.807728 49.152015 0.000000 0.000010 0.077399 -0.210E-02 lgRho_cntr log_rel_run_E_err -9.8657084573096512 rel_E_err 2.4601223586327997D-12 save photos/x150 for model 2150 check gamma integral 1.2479540911687693E-003 reached high velocities 0.40558708919477654 stopping in at least 1489.9435398298453 seconds save LOGS/gamma1_prof001.data for model 2156 2160 9.303312 2.866E+05 -5.412326 12.669087 51.691176 0.000000 0.000000 0.000000 0.219336 -1.181879 2548 1 -4.5364E+00 9.303312 -0.152909 7.686583 12.635214 -99.000000 51.691176 0.000000 0.834741 0.780664 0.287640 10 2.8768E+05 5.835536 6.478126 12.669082 12.957488 -7.790781 49.152015 0.000000 0.000010 0.080809 -0.269E-02 lgRho_cntr log_rel_run_E_err -9.1088285834850335 rel_E_err -2.1937886652545974D-10 check gamma integral -9.4692339826314058E-004 retry: check_lgL_power_photo_change hard limit 2162 retry: get_T_tau -- L <= 0 2162 residual_norm > tol_residual_norm 2163 9.2831876768036429D-04 9.9999999999999995D-07 max_residual > tol_max_residual 2163 1.4122864055600773D-01 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2163 6.9124907919380675D-03 3.0000000000000001D-03 1.0000000000000000D+00 retry: avg corr, avg+max resid -- give up in solver 2163 retry: check_lgL_power_photo_change hard limit 2164 retry: check_lgL_power_photo_change hard limit 2165 retry: check_lgL_power_photo_change hard limit 2166 retry: check_lgL_power_photo_change hard limit 2168 2170 9.297883 2.848E+05 -8.328065 12.475883 51.691176 0.000000 0.000000 0.000000 0.219336 -1.195872 2548 8 -6.1892E+00 9.297883 -0.149634 7.616715 12.588792 -99.000000 51.691176 0.000000 0.834541 0.780664 0.287822 3 2.8768E+05 5.819792 6.473886 12.475877 12.728103 -7.781644 49.152015 0.000000 0.000010 0.081090 -0.113E+00lgL_power_phot log_rel_run_E_err -8.8083071265952633 rel_E_err 2.3696360325805947D-12 check gamma integral -2.1137314367237009E-005 retry: check_lgL_power_photo_change hard limit 2172 retry: check_lgL_power_photo_change hard limit 2177 2180 9.307711 2.860E+05 -9.413895 12.785902 51.691176 0.000000 0.000000 0.000000 0.219336 -1.166646 2548 10 -6.6009E+00 9.307711 -0.155448 7.739650 12.670491 -99.000000 51.691176 0.000000 0.834500 0.780664 0.287989 3 2.8768E+05 5.849974 6.469312 12.785898 13.096404 -7.746789 49.152015 0.000000 0.000010 0.081147 -0.231E+00lgL_power_phot log_rel_run_E_err -8.8009010122720746 rel_E_err 2.6608779024777471D-12 check gamma integral -1.6323061221989539E-003 retry: check_lgL_power_photo_change hard limit 2187 2190 9.318783 2.868E+05 -8.608424 13.142617 51.691176 0.000000 0.000000 0.000000 0.219336 -1.133682 2550 11 -6.8668E+00 9.318783 -0.161055 7.874407 12.761274 -99.000000 51.691176 0.000000 0.834445 0.780664 0.288189 3 2.8768E+05 5.884019 6.462735 13.142614 13.501080 -7.706253 49.152015 0.000000 0.000010 0.081225 -0.374E+00lgL_power_phot log_rel_run_E_err -8.7876078744720960 rel_E_err 4.2766479839943742D-12 check gamma integral -3.3463467591644770E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.330737 2.874E+05 -9.034088 13.532520 51.691176 0.000000 0.000000 0.000000 0.219336 -1.098007 2551 11 -6.9830E+00 9.330737 -0.166281 8.015614 12.857812 -99.000000 51.691176 0.000000 0.834353 0.780664 0.288431 3 2.8768E+05 5.920845 6.455864 13.532519 13.923694 -7.667815 49.152015 0.000000 0.000009 0.081354 -0.533E+00lgL_power_phot log_rel_run_E_err -8.7724199348766074 rel_E_err 5.2520612927171526D-12 save LOGS/profile8.data for model 2200 save photos/x200 for model 2200 check gamma integral -5.0672023648462364E-003 2210 9.344204 2.877E+05 -8.473904 13.969649 51.691176 0.000000 0.000000 0.000000 0.219336 -1.057786 2553 11 -7.1318E+00 9.344204 -0.171349 8.170411 12.964864 -99.000000 51.691176 0.000000 0.834160 0.780664 0.288744 3 2.8768E+05 5.962397 6.447727 13.969648 14.377591 -7.627839 49.152015 0.000000 0.000009 0.081623 -0.713E+00lgL_power_phot log_rel_run_E_err -8.7622564918195849 rel_E_err 2.9014566711263376D-12 check gamma integral -6.8380685106310280E-003 2220 9.358136 2.877E+05 -8.361789 14.404552 51.691176 0.000000 0.000000 0.000000 0.219336 -1.016328 2553 11 -7.2702E+00 9.358136 -0.175895 8.326906 13.073858 -99.000000 51.691176 0.000000 0.833738 0.780664 0.289138 3 2.8768E+05 6.005380 6.438457 14.404552 14.812201 -7.588266 49.152015 0.000000 0.000009 0.082212 -0.904E+00lgL_power_phot log_rel_run_E_err -8.7541500353358259 rel_E_err 2.2804032666492019D-12 check gamma integral -8.4796116318231109E-003 2230 9.372349 2.874E+05 -8.779048 14.807103 51.691176 0.000000 0.000000 0.000000 0.219336 -0.974599 2553 11 -7.3766E+00 9.372349 -0.180003 8.484572 13.183431 -99.000000 51.691176 0.000000 0.832753 0.780664 0.289673 3 2.8768E+05 6.049063 6.428483 14.807103 15.200561 -7.550343 49.152015 0.000001 0.000009 0.083589 -0.110E+01lgL_power_phot log_rel_run_E_err -8.7475917022311922 rel_E_err 1.9268862334607784D-12 check gamma integral -9.9578245699777374E-003 2240 9.387446 2.869E+05 -7.327226 15.162589 51.691176 0.000000 0.000000 0.000000 0.219336 -0.931966 2556 11 -7.4397E+00 9.387446 -0.183951 8.652293 13.298075 -99.000000 51.691176 0.000000 0.830152 0.780664 0.290577 3 2.8768E+05 6.094807 6.417764 15.162588 15.528248 -7.513281 49.152015 0.000001 0.000010 0.087226 -0.132E+01lgL_power_phot log_rel_run_E_err -8.7378487537073202 rel_E_err 3.5338861430999798D-12 check gamma integral -1.1316809309262149E-002 2250 9.404747 2.863E+05 -6.406847 15.472709 51.691176 0.000000 0.000000 0.000000 0.219336 -0.888713 2543 11 -7.4682E+00 9.404747 -0.188109 8.847429 13.426672 -99.000000 51.691176 0.000000 0.821715 0.780664 0.292777 3 2.8768E+05 6.144843 6.405608 15.472709 15.787120 -7.474679 49.152015 0.000003 0.000011 0.098988 -0.158E+01 lgRho_cntr log_rel_run_E_err -8.7197968099632632 rel_E_err 1.5379595922257852D-12 save photos/x250 for model 2250 check gamma integral -1.2608381501053978E-002 2260 9.427251 2.854E+05 -9.433468 15.782141 51.691176 0.000000 0.000000 0.000000 0.219336 -0.857973 2534 11 -7.4252E+00 9.427251 -0.193088 9.105643 13.586409 -99.000000 51.691176 0.000000 0.782541 0.780664 0.302005 4 2.8768E+05 6.198383 6.390190 15.782141 15.990770 -7.429800 49.152015 0.000006 0.000014 0.151825 -0.193E+01 lgRho_cntr log_rel_run_E_err -8.6886010057006615 rel_E_err 3.7572611638573617D-12 check gamma integral -1.3861435947064826E-002 2270 9.450161 2.844E+05 -9.744052 16.052101 51.691176 0.000000 0.000000 0.000000 0.219336 -0.889699 2524 11 -7.7742E+00 9.450161 -0.197960 9.378175 13.739660 -99.000000 51.691176 0.000000 0.647501 0.780664 0.337585 4 2.8768E+05 6.222440 6.374347 16.052101 16.144179 -7.387504 49.152015 0.000014 0.000036 0.268031 -0.231E+01 XO_cntr log_rel_run_E_err -8.6496021389439495 rel_E_err 4.0743343563812111D-12 check gamma integral -1.4720608009051537E-002 2280 9.459764 2.839E+05 -5.618176 16.157718 51.691176 0.000000 0.000000 0.000000 0.219336 -0.923071 2518 11 -7.9526E+00 9.459764 -0.200228 9.508465 13.806433 -99.000000 51.691176 0.000000 0.538267 0.780664 0.372313 3 2.8768E+05 6.221593 6.366747 16.157718 16.258212 -7.368381 49.152015 0.000020 0.000049 0.292841 -0.251E+01 XO_cntr log_rel_run_E_err -8.6208527019765651 rel_E_err 3.2975897179239482D-12 check gamma integral -1.5002476355619108E-002 2290 9.466614 2.834E+05 -5.258550 16.229016 51.691176 0.000000 0.000000 0.000000 0.219336 -0.953241 2514 11 -8.0023E+00 9.466614 -0.202129 9.617623 13.858373 -99.000000 51.691176 0.000000 0.435981 0.780664 0.409729 3 2.8768E+05 6.216897 6.360263 16.229016 16.397195 -7.352609 49.152015 0.000025 0.000051 0.322576 -0.267E+01 XO_cntr log_rel_run_E_err -8.5959047517071951 rel_E_err 1.2225177016605606D-12 check gamma integral -1.5192995029481522E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.473047 2.829E+05 -8.918594 16.289477 51.691176 0.000000 0.000000 0.000000 0.219336 -0.983762 2510 11 -7.8260E+00 9.473047 -0.204420 9.746638 13.914323 -99.000000 51.691176 0.000001 0.322327 0.780664 0.457933 4 2.8768E+05 6.210423 6.352316 16.289476 16.586939 -7.333922 49.152015 0.000031 0.000046 0.360275 -0.289E+01 dX_nuc o16 log_rel_run_E_err -8.5456205023337244 rel_E_err 4.9627085750803411D-12 save LOGS/profile9.data for model 2300 save photos/x300 for model 2300 check gamma integral -1.5379523636437279E-002 2310 9.478112 2.822E+05 -5.214028 16.324592 51.691176 0.000000 0.000000 0.000000 0.219336 -1.007191 2507 11 -7.9263E+00 9.478112 -0.207006 9.885148 13.967193 -99.000000 51.691176 0.000001 0.223580 0.780664 0.506892 3 2.8768E+05 6.204911 6.343163 16.324592 16.783498 -7.313220 49.152015 0.000036 0.000037 0.393292 -0.314E+01 dX_nuc o16 log_rel_run_E_err -8.4706515543434833 rel_E_err -4.6420479317679688D-11 check gamma integral -1.5547338371519344E-002 2320 9.481896 2.814E+05 -5.541931 16.324297 51.691176 0.000000 0.000000 0.000000 0.219336 -1.024856 2505 11 -7.8312E+00 9.481896 -0.210311 10.041849 14.017042 -99.000000 51.691176 0.000002 0.142517 0.780664 0.553494 3 2.8768E+05 6.200237 6.331176 16.324297 16.966229 -7.289321 49.152015 0.000038 0.000026 0.419155 -0.346E+01 dX_nuc o16 log_rel_run_E_err -8.3726025704355749 rel_E_err -1.3589806978130190D-10 check gamma integral -1.5719413168606540E-002 2330 9.483112 2.801E+05 -9.043331 16.251540 51.691176 0.000000 0.000000 0.000000 0.219336 -1.040782 2509 11 -7.7140E+00 9.483112 -0.214778 10.193350 14.051335 -99.000000 51.691176 0.000002 0.085733 0.780664 0.590766 4 2.8768E+05 6.192746 6.314572 16.251539 17.068315 -7.255296 49.152015 0.000036 0.000017 0.434347 -0.395E+01 dX_nuc o16 log_rel_run_E_err -8.2872701922473517 rel_E_err 7.3448035364950515D-12 check gamma integral -1.5932257383623392E-002 2340 9.473988 2.775E+05 -11.616350 15.873928 51.691176 0.000000 0.000000 0.000000 0.219336 -1.083530 2512 11 -7.4123E+00 9.473988 -0.223434 10.234110 14.012643 -99.000000 51.691176 0.000001 0.050927 0.780664 0.615337 5 2.8768E+05 6.156045 6.281175 15.873927 16.798048 -7.192816 49.152015 0.000026 0.000009 0.439366 -0.502E+01 lgRho_cntr log_rel_run_E_err -8.1927199203917613 rel_E_err 8.9271000692764666D-12 check gamma integral -1.6461062489570345E-002 2350 9.456073 2.752E+05 -13.654869 15.318662 51.691176 0.000000 0.000000 0.000000 0.219336 -1.147003 2545 11 -7.7725E+00 9.456073 -0.230833 10.065915 13.892477 -99.000000 51.691176 0.000000 0.045426 0.780664 0.617335 5 2.8768E+05 6.096331 6.251664 15.318659 16.156739 -7.143071 49.152015 0.000017 0.000005 0.438392 -0.605E+01 lgRho_cntr log_rel_run_E_err -8.1600214332966203 rel_E_err 2.9009747259701723D-11 save photos/x350 for model 2350 check gamma integral -1.6944659510625345E-002 2360 9.439725 2.736E+05 -13.207718 14.845388 51.691176 0.000000 0.000000 0.000000 0.219336 -1.204591 2558 11 -7.9096E+00 9.439725 -0.235842 9.885684 13.777031 -99.000000 51.691176 0.000000 0.044702 0.780664 0.615718 7 2.8768E+05 6.042544 6.231357 14.845384 15.545795 -7.111184 49.152015 0.000011 0.000004 0.437396 -0.681E+01 lgRho_cntr log_rel_run_E_err -8.1463758267970920 rel_E_err 9.8679425939672574D-12 check gamma integral -1.7107754577772305E-002 retry: logT > hydro_mtx_max_allowed_logT 1620 2365 retry: logT > hydro_mtx_max_allowed_logT 1284 2368 retry: logT < hydro_mtx_min_allowed_logT 1294 1284 2369 2370 9.429821 2.727E+05 -13.602587 14.569166 51.691176 0.000000 0.000000 0.000000 0.219336 -1.239863 2565 14 -8.6210E+00 9.429821 -0.238538 9.774086 13.705857 -99.000000 51.691176 0.000000 0.044588 0.780664 0.614460 6 2.8768E+05 6.009959 6.220340 14.569159 15.167268 -7.094557 49.152015 0.000009 0.000003 0.436980 -0.724E+01 max increase log_rel_run_E_err -8.1399304606541527 rel_E_err 9.5534027833526235D-12 check gamma integral -1.7080124514861787E-002 retry: logT > hydro_mtx_max_allowed_logT 1272 2371 retry: logT < hydro_mtx_min_allowed_logT 1288 2374 retry: logT < hydro_mtx_min_allowed_logT 1264 2376 2380 9.427659 2.725E+05 -14.674407 14.509854 51.691176 0.000000 0.000000 0.000000 0.219336 -1.247598 2565 17 -8.7323E+00 9.427659 -0.239106 9.749643 13.690212 -99.000000 51.691176 0.000000 0.044573 0.780664 0.614177 9 2.8768E+05 6.002847 6.218011 14.509846 15.083886 -7.091097 49.152015 0.000009 0.000003 0.436909 -0.733E+01 max increase log_rel_run_E_err -8.1344166868286081 rel_E_err 9.2624051276363461D-12 check gamma integral -1.7060905990263539E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1252 2381 retry: logT < hydro_mtx_min_allowed_logT 1247 2384 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1240 2388 2390 9.425723 2.723E+05 -14.928654 14.457028 51.691176 0.000000 0.000000 0.000000 0.219336 -1.254537 2565 20 -8.8435E+00 9.425723 -0.239609 9.727734 13.676168 -99.000000 51.691176 0.000000 0.044563 0.780664 0.613921 7 2.8768E+05 5.996477 6.215947 14.457020 15.008999 -7.088048 49.152015 0.000008 0.000003 0.436851 -0.742E+01 max increase log_rel_run_E_err -8.1291222993333392 rel_E_err 8.8397323624067278D-12 check gamma integral -1.7039576107465548E-002 retry: logT > hydro_mtx_max_allowed_logT 1312 2393 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1227 2395 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1222 2398 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.423793 2.722E+05 -14.671015 14.404621 51.691176 0.000000 0.000000 0.000000 0.219336 -1.261470 2565 23 -8.9548E+00 9.423793 -0.240106 9.705871 13.662131 -99.000000 51.691176 0.000000 0.044554 0.780664 0.613664 7 2.8768E+05 5.990124 6.213910 14.404612 14.934122 -7.085050 49.152015 0.000008 0.000003 0.436800 -0.750E+01 max increase log_rel_run_E_err -8.1238573533911982 rel_E_err 9.2853700940690089D-12 save LOGS/profile10.data for model 2400 save photos/x400 for model 2400 check gamma integral -1.7014388129055563E-002 retry: logT > hydro_mtx_max_allowed_logT 1216 2402 retry: logT < hydro_mtx_min_allowed_logT 1211 2404 retry: logT > hydro_mtx_max_allowed_logT 1204 2409 2410 9.422398 2.721E+05 -15.170900 14.366927 51.691176 0.000000 0.000000 0.000000 0.219336 -1.266486 2565 26 -9.0661E+00 9.422398 -0.240462 9.690069 13.651971 -99.000000 51.691176 0.000000 0.044548 0.780664 0.613478 6 2.8768E+05 5.985534 6.212449 14.366918 14.879908 -7.082908 49.152015 0.000008 0.000003 0.436765 -0.756E+01 max increase log_rel_run_E_err -8.1187866976642322 rel_E_err 8.5210795805505908D-12 check gamma integral -1.6993735988305076E-002 retry: logT < hydro_mtx_min_allowed_logT 1200 2411 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1196 2414 retry: logT < hydro_mtx_min_allowed_logT 1192 2419 2420 9.421389 2.720E+05 -15.222343 14.339735 51.691176 0.000000 0.000000 0.000000 0.219336 -1.270120 2565 29 -9.1774E+00 9.421389 -0.240718 9.678629 13.644608 -99.000000 51.691176 0.000000 0.044545 0.780664 0.613342 6 2.8768E+05 5.982212 6.211397 14.339725 14.840612 -7.081371 49.152015 0.000008 0.000003 0.436742 -0.760E+01 max increase log_rel_run_E_err -8.1137127705404346 rel_E_err 8.8939937470197841D-12 check gamma integral -1.6977495747098306E-002 retry: logT < hydro_mtx_min_allowed_logT 1181 2423 retry: logT < hydro_mtx_min_allowed_logT 1176 2428 2430 9.420016 2.719E+05 -13.936089 14.302853 51.691176 0.000000 0.000000 0.000000 0.219336 -1.275070 2565 31 -8.9876E+00 9.420016 -0.241065 9.663061 13.634576 -99.000000 51.691176 0.000000 0.044540 0.780664 0.613157 6 2.8768E+05 5.977691 6.209973 14.302843 14.787063 -7.079296 49.152015 0.000007 0.000003 0.436713 -0.766E+01 max increase log_rel_run_E_err -8.1086972865978169 rel_E_err 8.7092505115363392D-12 check gamma integral -1.6953641820790406E-002 retry: logT > hydro_mtx_max_allowed_logT 1171 2432 retry: logT > hydro_mtx_max_allowed_logT 1168 2434 retry: logT < hydro_mtx_min_allowed_logT 1262 2437 retry: logT < hydro_mtx_min_allowed_logT 1158 2440 2440 9.418909 2.718E+05 -13.749719 14.273239 51.691176 0.000000 0.000000 0.000000 0.219336 -1.279062 2565 35 -9.3999E+00 9.418909 -0.241342 9.650516 13.626483 -99.000000 51.691176 0.000000 0.044537 0.780664 0.613007 6 2.8768E+05 5.974048 6.208832 14.273229 14.743857 -7.077638 49.152015 0.000007 0.000002 0.436691 -0.770E+01 retry log_rel_run_E_err -8.1038093987116131 rel_E_err 8.5055502589770891D-12 check gamma integral -1.6932945268794332E-002 retry: logT > hydro_mtx_max_allowed_logT 1189 2447 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1152 2450 2450 9.417618 2.717E+05 -14.557090 14.238771 51.691176 0.000000 0.000000 0.000000 0.219336 -1.283729 2572 37 -9.2102E+00 9.417618 -0.241665 9.635866 13.617020 -99.000000 51.691176 0.000000 0.044534 0.780664 0.612832 6 2.8768E+05 5.969794 6.207507 14.238760 14.693336 -7.075717 49.152015 0.000007 0.000002 0.436667 -0.776E+01 retry log_rel_run_E_err -8.0989850115111022 rel_E_err 8.8353137764472062D-12 save photos/x450 for model 2450 check gamma integral -1.6907097944865498E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1224 2453 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1144 2455 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1152 2459 2460 9.416693 2.716E+05 -14.843655 14.214152 51.691176 0.000000 0.000000 0.000000 0.219336 -1.287076 2572 40 -9.4006E+00 9.416693 -0.241895 9.625370 13.610233 -99.000000 51.691176 0.000000 0.044532 0.780664 0.612706 6 2.8768E+05 5.966746 6.206560 14.214141 14.657095 -7.074349 49.152015 0.000007 0.000002 0.436651 -0.780E+01 hold log_rel_run_E_err -8.0941847707940120 rel_E_err 8.7898895093642616D-12 check gamma integral -1.6887462570862634E-002 retry: logT < hydro_mtx_min_allowed_logT 1131 2465 retry: logT < hydro_mtx_min_allowed_logT 1126 2469 2470 9.415821 2.715E+05 -14.413987 14.191020 51.691176 0.000000 0.000000 0.000000 0.219336 -1.290230 2572 42 -9.2901E+00 9.415821 -0.242111 9.615484 13.603835 -99.000000 51.691176 0.000000 0.044530 0.780664 0.612587 6 2.8768E+05 5.963875 6.205672 14.191008 14.622928 -7.073065 49.152015 0.000007 0.000002 0.436637 -0.783E+01 max increase log_rel_run_E_err -8.0895135067890518 rel_E_err 8.5560223384987954D-12 check gamma integral -1.6868111537999896E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1123 2473 retry: logT > hydro_mtx_max_allowed_logT 1119 2477 2480 9.414792 2.714E+05 -14.017573 14.163770 51.691176 0.000000 0.000000 0.000000 0.219336 -1.293959 2572 44 -9.1003E+00 9.414792 -0.242365 9.603807 13.596271 -99.000000 51.691176 0.000000 0.044528 0.780664 0.612446 7 2.8768E+05 5.960484 6.204627 14.163758 14.582533 -7.071556 49.152015 0.000007 0.000002 0.436621 -0.788E+01 max increase log_rel_run_E_err -8.0849639576023531 rel_E_err 8.8040909252512222D-12 check gamma integral -1.6844181464706221E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1114 2481 retry: logT < hydro_mtx_min_allowed_logT 1110 2484 retry: logT > hydro_mtx_max_allowed_logT 1108 2487 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1104 2490 2490 9.413984 2.714E+05 -14.701502 14.142430 51.691176 0.000000 0.000000 0.000000 0.219336 -1.296889 2572 48 -9.5126E+00 9.413984 -0.242564 9.594641 13.590327 -99.000000 51.691176 0.000000 0.044527 0.780664 0.612335 6 2.8768E+05 5.957822 6.203809 14.142418 14.550790 -7.070379 49.152015 0.000007 0.000002 0.436610 -0.791E+01 retry log_rel_run_E_err -8.0803436536075921 rel_E_err 8.3848799371379203D-12 check gamma integral -1.6824576138835229E-002 retry: logT < hydro_mtx_min_allowed_logT 1150 2493 retry: adjust_correction failed in eval_equations -- give up in solver 2497 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.413360 2.713E+05 -15.105352 14.125982 51.691176 0.000000 0.000000 0.000000 0.219336 -1.299152 2572 50 -9.3229E+00 9.413360 -0.242717 9.587562 13.585733 -99.000000 51.691176 0.000000 0.044525 0.780664 0.612249 6 2.8768E+05 5.955766 6.203179 14.125969 14.526257 -7.069474 49.152015 0.000007 0.000002 0.436601 -0.794E+01 max increase log_rel_run_E_err -8.0758952479258213 rel_E_err 8.3049513420774935D-12 save LOGS/profile11.data for model 2500 save photos/x500 for model 2500 k, q, energy_removed_layers before adjustment is 1125 0.99999902500000049 2.8750780179016113E+045 k, q, energy_removed_layers after adjustment is 1352 0.99998490611919677 2.0587285826742813E+047 Layers above q= 0.99998490611919677 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.8496093750000 max vel inside fraction of cutoff 1567.7184105156286 max c/cs inside fraction of cutoff 0.54889504165774960 average v/vesc outside cutoff 0.72431792875277479 Kinetic plus potential energy outside cutoff 2.0587285826742813E+047 mass inside cutoff 1352 51.690395556759718 relax counter 0 log max v [km/s]= 3.9356433678554867 check gamma integral -1.6808939593471128E-002 retry: logT > hydro_mtx_max_allowed_logT 1094 2501 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1088 2506 retry: logT > hydro_mtx_max_allowed_logT 1086 2509 2510 9.412670 2.713E+05 -15.017493 14.107807 51.691176 0.000000 0.000000 0.000000 0.219336 -1.301660 2572 53 -9.4341E+00 9.412670 -0.242886 9.579726 13.580644 -99.000000 51.691176 0.000000 0.044524 0.780664 0.612154 6 2.8768E+05 5.953490 6.202484 14.107794 14.499084 -7.068478 49.152015 0.000007 0.000002 0.436592 -0.796E+01 max increase log_rel_run_E_err -8.0714089962635143 rel_E_err 8.9847966609142531D-12 k, q, energy_removed_layers before adjustment is 1140 0.99999881343543928 2.5590171060617053E+046 k, q, energy_removed_layers after adjustment is 1352 0.99998490611919677 2.1868167893582661E+047 Layers above q= 0.99998490611919677 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8315.9824218750000 max vel inside fraction of cutoff 1577.0170293603214 max c/cs inside fraction of cutoff 0.55272949771318047 average v/vesc outside cutoff 0.74207141227288120 Kinetic plus potential energy outside cutoff 2.1868167893582661E+047 mass inside cutoff 1352 51.690395556759718 relax counter 0 log max v [km/s]= 3.9472787271779191 check gamma integral -1.6791129777560143E-002 retry: logT > hydro_mtx_max_allowed_logT 1080 2513 retry: logT < hydro_mtx_min_allowed_logT 1076 2516 retry: logT < hydro_mtx_min_allowed_logT 1075 2520 2520 9.412010 2.712E+05 -15.701547 14.090474 51.691176 0.000000 0.000000 0.000000 0.219336 -1.304056 2572 56 -9.5454E+00 9.412010 -0.243047 9.572240 13.575779 -99.000000 51.691176 0.000000 0.044523 0.780664 0.612064 5 2.8768E+05 5.951316 6.201821 14.090461 14.473105 -7.067531 49.152015 0.000006 0.000002 0.436584 -0.799E+01 retry log_rel_run_E_err -8.0670058012950356 rel_E_err 8.8264911313084668D-12 k, q, energy_removed_layers before adjustment is 1155 0.99999860212925151 4.5613574445344016E+046 k, q, energy_removed_layers after adjustment is 1353 0.99998467496131871 2.3060024494295479E+047 Layers above q= 0.99998467496131871 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.1035156250000 max vel inside fraction of cutoff 1585.8337386534868 max c/cs inside fraction of cutoff 0.55637605192678086 average v/vesc outside cutoff 0.75513299504484221 Kinetic plus potential energy outside cutoff 2.3060024494295479E+047 mass inside cutoff 1353 51.690383607937214 relax counter 0 log max v [km/s]= 3.9606712624689373 check gamma integral -1.6773616714794184E-002 retry: logT < hydro_mtx_min_allowed_logT 1092 2526 retry: logT < hydro_mtx_min_allowed_logT 1062 2529 2530 9.411174 2.711E+05 -13.770958 14.068559 51.691176 0.000000 0.000000 0.000000 0.219336 -1.307095 2572 58 -9.3557E+00 9.411174 -0.243251 9.562755 13.569610 -99.000000 51.691176 0.000000 0.044522 0.780664 0.611948 6 2.8768E+05 5.948561 6.200982 14.068545 14.440168 -7.066337 49.152015 0.000006 0.000002 0.436574 -0.803E+01 max increase log_rel_run_E_err -8.0626570712465710 rel_E_err 8.6367228256491780D-12 k, q, energy_removed_layers before adjustment is 1166 0.99999835349100852 6.9554414929412162E+046 k, q, energy_removed_layers after adjustment is 1354 0.99998448915842719 2.4521188414711512E+047 Layers above q= 0.99998448915842719 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.2597656250000 max vel inside fraction of cutoff 1596.9092975073061 max c/cs inside fraction of cutoff 0.56097203478055846 average v/vesc outside cutoff 0.77389305717346013 Kinetic plus potential energy outside cutoff 2.4521188414711512E+047 mass inside cutoff 1354 51.690374003567285 relax counter 0 log max v [km/s]= 3.9753014647547142 check gamma integral -1.6750729763806954E-002 retry: logT < hydro_mtx_min_allowed_logT 1061 2533 retry: logT > hydro_mtx_max_allowed_logT 1056 2536 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1052 2540 2540 9.410375 2.711E+05 -14.185603 14.047647 51.691176 0.000000 0.000000 0.000000 0.219336 -1.310002 2572 61 -9.4669E+00 9.410375 -0.243445 9.553686 13.563706 -99.000000 51.691176 0.000000 0.044521 0.780664 0.611838 5 2.8768E+05 5.945926 6.200183 14.047633 14.408647 -7.065200 49.152015 0.000006 0.000002 0.436565 -0.806E+01 retry log_rel_run_E_err -8.0583221535506588 rel_E_err 8.9901510450187775D-12 k, q, energy_removed_layers before adjustment is 1181 0.99999810474095119 9.0634620099476187E+046 k, q, energy_removed_layers after adjustment is 1354 0.99998448915842719 2.5874064692162804E+047 Layers above q= 0.99998448915842719 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.4062500000000 max vel inside fraction of cutoff 1607.4051740335956 max c/cs inside fraction of cutoff 0.56534307074447199 average v/vesc outside cutoff 0.79211251863967025 Kinetic plus potential energy outside cutoff 2.5874064692162804E+047 mass inside cutoff 1354 51.690374003567285 relax counter 0 log max v [km/s]= 3.9885426542572167 check gamma integral -1.6728113057581855E-002 retry: logT > hydro_mtx_max_allowed_logT 1050 2543 retry: logT > hydro_mtx_max_allowed_logT 1047 2546 retry: logT < hydro_mtx_min_allowed_logT 1116 2549 2550 9.409791 2.710E+05 -14.455136 14.032407 51.691176 0.000000 0.000000 0.000000 0.219336 -1.312127 2572 64 -9.5782E+00 9.409791 -0.243586 9.547064 13.559392 -99.000000 51.691176 0.000000 0.044521 0.780664 0.611757 6 2.8768E+05 5.944002 6.199601 14.032393 14.385617 -7.064372 49.152015 0.000006 0.000002 0.436558 -0.809E+01 max increase log_rel_run_E_err -8.0540310050862249 rel_E_err 8.8463035528696277D-12 save photos/x550 for model 2550 k, q, energy_removed_layers before adjustment is 1186 0.99999793929516878 1.0487729384103759E+047 k, q, energy_removed_layers after adjustment is 1355 0.99998430132004523 2.6834008321427108E+047 Layers above q= 0.99998430132004523 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.5156250000000 max vel inside fraction of cutoff 1615.0119609268563 max c/cs inside fraction of cutoff 0.56852043181848544 average v/vesc outside cutoff 0.80365471478432915 Kinetic plus potential energy outside cutoff 2.6834008321427108E+047 mass inside cutoff 1355 51.690364293980473 relax counter 0 log max v [km/s]= 3.9984480148690422 check gamma integral -1.6711146704204389E-002 retry: logT > hydro_mtx_max_allowed_logT 1040 2553 retry: logT < hydro_mtx_min_allowed_logT 1035 2559 2560 9.409148 2.710E+05 -15.297724 14.015650 51.691176 0.000000 0.000000 0.000000 0.219336 -1.314467 2572 66 -9.3885E+00 9.409148 -0.243742 9.539772 13.554639 -99.000000 51.691176 0.000000 0.044520 0.780664 0.611669 6 2.8768E+05 5.941884 6.198960 14.015636 14.360240 -7.063463 49.152015 0.000006 0.000002 0.436552 -0.811E+01 max increase log_rel_run_E_err -8.0498457495150895 rel_E_err 8.3682858008678402D-12 k, q, energy_removed_layers before adjustment is 1192 0.99999774088919335 1.2083301527871091E+047 k, q, energy_removed_layers after adjustment is 1355 0.99998430132004523 2.7866272612343311E+047 Layers above q= 0.99998430132004523 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.6328125000000 max vel inside fraction of cutoff 1623.3333483226550 max c/cs inside fraction of cutoff 0.57200559497403669 average v/vesc outside cutoff 0.81739743190660441 Kinetic plus potential energy outside cutoff 2.7866272612343311E+047 mass inside cutoff 1355 51.690364293980473 relax counter 0 log max v [km/s]= 4.0247100553098578 check gamma integral -1.6692017560253850E-002 retry: logT > hydro_mtx_max_allowed_logT 1032 2561 retry: logT > hydro_mtx_max_allowed_logT 1029 2564 retry: logT > hydro_mtx_max_allowed_logT 1025 2568 2570 9.408657 2.709E+05 -15.908198 14.002847 51.691176 0.000000 0.000000 0.000000 0.219336 -1.316259 2572 69 -9.4997E+00 9.408657 -0.243860 9.534192 13.550999 -99.000000 51.691176 0.000000 0.044519 0.780664 0.611600 6 2.8768E+05 5.940262 6.198471 14.002832 14.340811 -7.062770 49.152015 0.000006 0.000002 0.436547 -0.813E+01 max increase log_rel_run_E_err -8.0456793082648641 rel_E_err 8.6952128508475488D-12 k, q, energy_removed_layers before adjustment is 1197 0.99999759238164698 1.3213933517258645E+047 k, q, energy_removed_layers after adjustment is 1356 0.99998411137893406 2.8639614951842395E+047 Layers above q= 0.99998411137893406 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.7226562500000 max vel inside fraction of cutoff 1629.6630939802101 max c/cs inside fraction of cutoff 0.57466309747498345 average v/vesc outside cutoff 0.82613824382595424 Kinetic plus potential energy outside cutoff 2.8639614951842395E+047 mass inside cutoff 1356 51.690354475701106 relax counter 0 log max v [km/s]= 4.0262852829834452 check gamma integral -1.6677062953728613E-002 retry: logT > hydro_mtx_max_allowed_logT 1021 2572 retry: logT > hydro_mtx_max_allowed_logT 1017 2576 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1022 2580 2580 9.408114 2.709E+05 -14.801504 13.988723 51.691176 0.000000 0.000000 0.000000 0.219336 -1.318239 2572 72 -9.6110E+00 9.408114 -0.243991 9.528028 13.546976 -99.000000 51.691176 0.000000 0.044519 0.780664 0.611525 6 2.8768E+05 5.938471 6.197932 13.988708 14.319340 -7.062005 49.152015 0.000006 0.000002 0.436542 -0.816E+01 retry log_rel_run_E_err -8.0415849511150377 rel_E_err 8.8764091496534413D-12 k, q, energy_removed_layers before adjustment is 1203 0.99999744202507668 1.4400869631165436E+047 k, q, energy_removed_layers after adjustment is 1357 0.99998391939875464 2.9476912223486647E+047 Layers above q= 0.99998391939875464 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.8203125000000 max vel inside fraction of cutoff 1636.6160816234719 max c/cs inside fraction of cutoff 0.57758883262037042 average v/vesc outside cutoff 0.83521915071443042 Kinetic plus potential energy outside cutoff 2.9476912223486647E+047 mass inside cutoff 1357 51.690344552019901 relax counter 0 log max v [km/s]= 4.0389315603318314 check gamma integral -1.6660227704607927E-002 retry: logT < hydro_mtx_min_allowed_logT 1009 2586 retry: logT < hydro_mtx_min_allowed_logT 1004 2589 2590 9.407594 2.709E+05 -14.796633 13.975247 51.691176 0.000000 0.000000 0.000000 0.219336 -1.320132 2572 74 -9.5796E+00 9.407594 -0.244116 9.522139 13.543129 -99.000000 51.691176 0.000000 0.044518 0.780664 0.611453 6 2.8768E+05 5.936760 6.197417 13.975231 14.298815 -7.061277 49.152015 0.000006 0.000002 0.436537 -0.818E+01 max increase log_rel_run_E_err -8.0375381924633444 rel_E_err 8.5951667337588852D-12 k, q, energy_removed_layers before adjustment is 1209 0.99999729420841266 1.5477970079255191E+047 k, q, energy_removed_layers after adjustment is 1360 0.99998335559943241 3.0264721219987843E+047 Layers above q= 0.99998335559943241 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.9160156250000 max vel inside fraction of cutoff 1643.2224098012971 max c/cs inside fraction of cutoff 0.58037507448643644 average v/vesc outside cutoff 0.84064222959575297 Kinetic plus potential energy outside cutoff 3.0264721219987843E+047 mass inside cutoff 1360 51.690315408570029 relax counter 0 log max v [km/s]= 4.0485380045163142 check gamma integral -1.6643828731391190E-002 retry: logT > hydro_mtx_max_allowed_logT 1001 2592 retry: logT < hydro_mtx_min_allowed_logT 1036 2596 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.407166 2.708E+05 -15.355372 13.964133 51.691176 0.000000 0.000000 0.000000 0.219336 -1.321696 2572 76 -9.5482E+00 9.407166 -0.244219 9.517276 13.539952 -99.000000 51.691176 0.000000 0.044518 0.780664 0.611394 6 2.8768E+05 5.935346 6.196993 13.964118 14.281861 -7.060676 49.152015 0.000006 0.000002 0.436533 -0.819E+01 max increase log_rel_run_E_err -8.0335158774684317 rel_E_err 8.6759043116357044D-12 save LOGS/profile12.data for model 2600 save photos/x600 for model 2600 k, q, energy_removed_layers before adjustment is 1214 0.99999715662932642 1.6385396425867912E+047 k, q, energy_removed_layers after adjustment is 1360 0.99998335559943241 3.0907640972073591E+047 Layers above q= 0.99998335559943241 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8316.9921875000000 max vel inside fraction of cutoff 1648.6502762439679 max c/cs inside fraction of cutoff 0.58266894843026618 average v/vesc outside cutoff 0.84879253028706614 Kinetic plus potential energy outside cutoff 3.0907640972073591E+047 mass inside cutoff 1360 51.690315408570029 relax counter 0 log max v [km/s]= 4.0575194303471722 check gamma integral -1.6630056923460434E-002 retry: logT > hydro_mtx_max_allowed_logT 995 2602 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1066 2608 2610 9.406555 2.708E+05 -15.006615 13.948306 51.691176 0.000000 0.000000 0.000000 0.219336 -1.323926 2572 78 -9.3585E+00 9.406555 -0.244366 9.510342 13.535418 -99.000000 51.691176 0.000000 0.044517 0.780664 0.611309 7 2.8768E+05 5.933331 6.196389 13.948291 14.257673 -7.059822 49.152015 0.000006 0.000002 0.436528 -0.822E+01 max increase log_rel_run_E_err -8.0295444797658817 rel_E_err 8.5715546002698386D-12 k, q, energy_removed_layers before adjustment is 1219 0.99999697812396438 1.7673901849904565E+047 k, q, energy_removed_layers after adjustment is 1363 0.99998286392502611 3.1809965625229434E+047 Layers above q= 0.99998286392502611 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.1015625000000 max vel inside fraction of cutoff 1656.3480618951676 max c/cs inside fraction of cutoff 0.58592947064527567 average v/vesc outside cutoff 0.85393917398874319 Kinetic plus potential energy outside cutoff 3.1809965625229434E+047 mass inside cutoff 1363 51.690289993341878 relax counter 0 log max v [km/s]= 4.0741145323305377 check gamma integral -1.6610057235353155E-002 retry: logT < hydro_mtx_min_allowed_logT 1054 2612 retry: logT < hydro_mtx_min_allowed_logT 979 2615 retry: logT > hydro_mtx_max_allowed_logT 977 2617 retry: logT < hydro_mtx_min_allowed_logT 990 2620 2620 9.405997 2.707E+05 -15.043712 13.933875 51.691176 0.000000 0.000000 0.000000 0.219336 -1.325965 2572 82 -9.7708E+00 9.405997 -0.244500 9.504009 13.531276 -99.000000 51.691176 0.000000 0.044517 0.780664 0.611231 5 2.8768E+05 5.931490 6.195838 13.933859 14.235574 -7.059045 49.152015 0.000006 0.000002 0.436523 -0.824E+01 retry log_rel_run_E_err -8.0256315470108657 rel_E_err 8.5140804379359471D-12 k, q, energy_removed_layers before adjustment is 1224 0.99999683487604873 1.8655254926730355E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998226341197494 3.2632648785126615E+047 Layers above q= 0.99998226341197494 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.1992187500000 max vel inside fraction of cutoff 1663.3350032554686 max c/cs inside fraction of cutoff 0.58889632096707434 average v/vesc outside cutoff 0.86416565055286976 Kinetic plus potential energy outside cutoff 3.2632648785126615E+047 mass inside cutoff 1366 51.690258952116189 relax counter 0 log max v [km/s]= 4.0766560072857176 check gamma integral -1.6591421915405621E-002 retry: logT < hydro_mtx_min_allowed_logT 970 2624 retry: logT < hydro_mtx_min_allowed_logT 967 2628 2630 9.405581 2.707E+05 -15.092314 13.923127 51.691176 0.000000 0.000000 0.000000 0.219336 -1.327485 2572 84 -9.5810E+00 9.405581 -0.244599 9.499287 13.528184 -99.000000 51.691176 0.000000 0.044516 0.780664 0.611173 6 2.8768E+05 5.930118 6.195426 13.923110 14.219086 -7.058466 49.152015 0.000006 0.000002 0.436520 -0.826E+01 max increase log_rel_run_E_err -8.0216872620172275 rel_E_err 8.8184216544499312D-12 k, q, energy_removed_layers before adjustment is 1228 0.99999670542501651 1.9521866419784464E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998226341197494 3.3231650653171031E+047 Layers above q= 0.99998226341197494 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.2734375000000 max vel inside fraction of cutoff 1668.5202240297574 max c/cs inside fraction of cutoff 0.59110265269338713 average v/vesc outside cutoff 0.87138398804249384 Kinetic plus potential energy outside cutoff 3.3231650653171031E+047 mass inside cutoff 1366 51.690258952116189 relax counter 0 log max v [km/s]= 4.0930422497515346 check gamma integral -1.6577290800012644E-002 retry: logT < hydro_mtx_min_allowed_logT 963 2631 retry: logRho > hydro_mtx_max_allowed_logRho 962 2634 retry: logT < hydro_mtx_min_allowed_logT 962 2640 2640 9.405203 2.707E+05 -14.462116 13.913372 51.691176 0.000000 0.000000 0.000000 0.219336 -1.328867 2572 87 -9.6923E+00 9.405203 -0.244690 9.494997 13.525375 -99.000000 51.691176 0.000000 0.044516 0.780664 0.611121 6 2.8768E+05 5.928870 6.195054 13.913355 14.204104 -7.057940 49.152015 0.000006 0.000002 0.436517 -0.828E+01 retry log_rel_run_E_err -8.0177866750569571 rel_E_err 8.5946893701057464D-12 k, q, energy_removed_layers before adjustment is 1230 0.99999662253736510 2.0154986696533683E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998226341197494 3.3767615595905093E+047 Layers above q= 0.99998226341197494 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.3417968750000 max vel inside fraction of cutoff 1673.2115881664201 max c/cs inside fraction of cutoff 0.59310222887629960 average v/vesc outside cutoff 0.87784966632649564 Kinetic plus potential energy outside cutoff 3.3767615595905093E+047 mass inside cutoff 1366 51.690258952116189 relax counter 0 log max v [km/s]= 4.1063237772657706 check gamma integral -1.6564282605310090E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1026 2643 retry: logT < hydro_mtx_min_allowed_logT 1028 2648 2650 9.404733 2.706E+05 -15.046663 13.901260 51.691176 0.000000 0.000000 0.000000 0.219336 -1.330585 2572 89 -9.5026E+00 9.404733 -0.244802 9.489664 13.521881 -99.000000 51.691176 0.000000 0.044516 0.780664 0.611055 6 2.8768E+05 5.927320 6.194591 13.901244 14.185474 -7.057289 49.152015 0.000006 0.000002 0.436514 -0.830E+01 max increase log_rel_run_E_err -8.0139259753811736 rel_E_err 8.3254714435690456D-12 save photos/x650 for model 2650 k, q, energy_removed_layers before adjustment is 1234 0.99999645909436286 2.1085283928137486E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998226341197494 3.4423081705658426E+047 Layers above q= 0.99998226341197494 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.4257812500000 max vel inside fraction of cutoff 1679.0174092872217 max c/cs inside fraction of cutoff 0.59558131432896932 average v/vesc outside cutoff 0.88576718766349449 Kinetic plus potential energy outside cutoff 3.4423081705658426E+047 mass inside cutoff 1366 51.690258952116189 relax counter 0 log max v [km/s]= 4.1155561791830806 check gamma integral -1.6547885429777854E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 944 2653 retry: logT < hydro_mtx_min_allowed_logT 996 2657 2660 9.404112 2.706E+05 -14.564387 13.885284 51.691176 0.000000 0.000000 0.000000 0.219336 -1.332856 2572 91 -9.4712E+00 9.404112 -0.244950 9.482621 13.517264 -99.000000 51.691176 0.000000 0.044515 0.780664 0.610969 6 2.8768E+05 5.925272 6.193982 13.885267 14.160856 -7.056430 49.152015 0.000006 0.000002 0.436509 -0.832E+01 max increase log_rel_run_E_err -8.0101139272381925 rel_E_err 8.4158419721859814D-12 k, q, energy_removed_layers before adjustment is 1239 0.99999624913650231 2.2291702252408475E+047 k, q, energy_removed_layers after adjustment is 1367 0.99998196333530476 3.5271992624560135E+047 Layers above q= 0.99998196333530476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.5351562500000 max vel inside fraction of cutoff 1686.6435952184895 max c/cs inside fraction of cutoff 0.59884531396800678 average v/vesc outside cutoff 0.89304417988218265 Kinetic plus potential energy outside cutoff 3.5271992624560135E+047 mass inside cutoff 1367 51.690243440800280 relax counter 0 log max v [km/s]= 4.1251922147159013 check gamma integral -1.6525836737701676E-002 retry: logT < hydro_mtx_min_allowed_logT 943 2663 retry: logT < hydro_mtx_min_allowed_logT 932 2666 retry: logT < hydro_mtx_min_allowed_logT 928 2670 2670 9.403471 2.705E+05 -15.418478 13.868810 51.691176 0.000000 0.000000 0.000000 0.219336 -1.335203 2572 94 -9.5825E+00 9.403471 -0.245102 9.475346 13.512491 -99.000000 51.691176 0.000000 0.044515 0.780664 0.610879 6 2.8768E+05 5.923157 6.193353 13.868793 14.135418 -7.055547 49.152015 0.000006 0.000002 0.436505 -0.835E+01 retry log_rel_run_E_err -8.0063249424453780 rel_E_err 8.7886265779084033D-12 k, q, energy_removed_layers before adjustment is 1242 0.99999605079732989 2.3433248366524060E+047 k, q, energy_removed_layers after adjustment is 1367 0.99998196333530476 3.6131959166831944E+047 Layers above q= 0.99998196333530476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.6503906250000 max vel inside fraction of cutoff 1694.4700533247499 max c/cs inside fraction of cutoff 0.60220401220306963 average v/vesc outside cutoff 0.90332202017073038 Kinetic plus potential energy outside cutoff 3.6131959166831944E+047 mass inside cutoff 1367 51.690243440800280 relax counter 0 log max v [km/s]= 4.1388700269088474 check gamma integral -1.6502598678311151E-002 retry: logT < hydro_mtx_min_allowed_logT 928 2672 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 922 2675 retry: logT < hydro_mtx_min_allowed_logT 920 2679 2680 9.403066 2.705E+05 -15.126337 13.858439 51.691176 0.000000 0.000000 0.000000 0.219336 -1.336682 2572 97 -9.6937E+00 9.403066 -0.245198 9.470760 13.509481 -99.000000 51.691176 0.000000 0.044515 0.780664 0.610823 6 2.8768E+05 5.921824 6.192955 13.858421 14.119377 -7.054991 49.152015 0.000006 0.000002 0.436502 -0.837E+01 max increase log_rel_run_E_err -8.0026515629307529 rel_E_err 8.1944482469295139D-12 k, q, energy_removed_layers before adjustment is 1243 0.99999598405015244 2.3980276653529898E+047 k, q, energy_removed_layers after adjustment is 1367 0.99998196333530476 3.6663901047558010E+047 Layers above q= 0.99998196333530476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.7226562500000 max vel inside fraction of cutoff 1699.3785883949151 max c/cs inside fraction of cutoff 0.60431509080445645 average v/vesc outside cutoff 0.90969197443189331 Kinetic plus potential energy outside cutoff 3.6663901047558010E+047 mass inside cutoff 1367 51.690243440800280 relax counter 0 log max v [km/s]= 4.1502119029104101 check gamma integral -1.6487706435267535E-002 retry: logT < hydro_mtx_min_allowed_logT 918 2683 retry: logT < hydro_mtx_min_allowed_logT 913 2686 retry: logT > hydro_mtx_max_allowed_logT 911 2690 2690 9.402680 2.705E+05 -15.488964 13.848540 51.691176 0.000000 0.000000 0.000000 0.219336 -1.338097 2572 100 -9.8050E+00 9.402680 -0.245290 9.466378 13.506603 -99.000000 51.691176 0.000000 0.044514 0.780664 0.610769 5 2.8768E+05 5.920550 6.192578 13.848522 14.104044 -7.054460 49.152015 0.000006 0.000002 0.436500 -0.838E+01 retry log_rel_run_E_err -7.9990098072704194 rel_E_err 8.4219658993364517D-12 k, q, energy_removed_layers before adjustment is 1245 0.99999585324657725 2.4728041622404876E+047 k, q, energy_removed_layers after adjustment is 1367 0.99998196333530476 3.7164803924054243E+047 Layers above q= 0.99998196333530476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.7910156250000 max vel inside fraction of cutoff 1704.0504087153608 max c/cs inside fraction of cutoff 0.60632771117212325 average v/vesc outside cutoff 0.91569945997269109 Kinetic plus potential energy outside cutoff 3.7164803924054243E+047 mass inside cutoff 1367 51.690243440800280 relax counter 0 log max v [km/s]= 4.1615343178008715 check gamma integral -1.6473299903309889E-002 retry: logT < hydro_mtx_min_allowed_logT 907 2694 retry: logT < hydro_mtx_min_allowed_logT 903 2698 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.402288 2.704E+05 -15.688063 13.838485 51.691176 0.000000 0.000000 0.000000 0.219336 -1.339535 2572 102 -9.6153E+00 9.402288 -0.245383 9.461923 13.503677 -99.000000 51.691176 0.000000 0.044514 0.780664 0.610714 6 2.8768E+05 5.919254 6.192194 13.838467 14.088453 -7.053922 49.152015 0.000006 0.000002 0.436497 -0.840E+01 max increase log_rel_run_E_err -7.9953921378178263 rel_E_err 8.4120357557558189D-12 save LOGS/profile13.data for model 2700 save photos/x700 for model 2700 k, q, energy_removed_layers before adjustment is 1246 0.99999578658227173 2.5262928625868356E+047 k, q, energy_removed_layers after adjustment is 1367 0.99998196333530476 3.7666725688876485E+047 Layers above q= 0.99998196333530476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.8613281250000 max vel inside fraction of cutoff 1708.7816381316047 max c/cs inside fraction of cutoff 0.60836927166666910 average v/vesc outside cutoff 0.92172843610398270 Kinetic plus potential energy outside cutoff 3.7666725688876485E+047 mass inside cutoff 1367 51.690243440800280 relax counter 0 log max v [km/s]= 4.1716475220393141 check gamma integral -1.6458477813010252E-002 retry: logT > hydro_mtx_max_allowed_logT 898 2702 retry: logT < hydro_mtx_min_allowed_logT 898 2705 retry: logT < hydro_mtx_min_allowed_logT 891 2710 2710 9.401882 2.704E+05 -14.960498 13.828103 51.691176 0.000000 0.000000 0.000000 0.219336 -1.341023 2572 105 -9.7265E+00 9.401882 -0.245479 9.457319 13.500650 -99.000000 51.691176 0.000000 0.044514 0.780664 0.610657 5 2.8768E+05 5.917915 6.191798 13.828084 14.072332 -7.053366 49.152015 0.000006 0.000002 0.436495 -0.841E+01 retry log_rel_run_E_err -7.9917499439075224 rel_E_err 8.6204825833903643D-12 k, q, energy_removed_layers before adjustment is 1248 0.99999565402390067 2.5975301129710585E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 3.8180749833492490E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8317.9316406250000 max vel inside fraction of cutoff 1713.6528644967605 max c/cs inside fraction of cutoff 0.61047477889458479 average v/vesc outside cutoff 0.92458794302123060 Kinetic plus potential energy outside cutoff 3.8180749833492490E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.1849746487686241 check gamma integral -1.6442969046246286E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 890 2714 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 904 2718 2720 9.401409 2.704E+05 -15.630633 13.816022 51.691176 0.000000 0.000000 0.000000 0.219336 -1.342756 2572 107 -9.5368E+00 9.401409 -0.245591 9.451955 13.497123 -99.000000 51.691176 0.000000 0.044514 0.780664 0.610591 6 2.8768E+05 5.916355 6.191336 13.816004 14.053548 -7.052721 49.152015 0.000006 0.000002 0.436492 -0.843E+01 max increase log_rel_run_E_err -7.9881213045307984 rel_E_err 8.7200973720941004D-12 k, q, energy_removed_layers before adjustment is 1250 0.99999552148955717 2.6711450610327386E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 3.8769866870012982E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.0136718750000 max vel inside fraction of cutoff 1719.3026559024245 max c/cs inside fraction of cutoff 0.61292133108433766 average v/vesc outside cutoff 0.93158512049557440 Kinetic plus potential energy outside cutoff 3.8769866870012982E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.1938466846576778 check gamma integral -1.6424661252822853E-002 retry: logT > hydro_mtx_max_allowed_logT 883 2722 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 928 2725 retry: logT < hydro_mtx_min_allowed_logT 877 2730 2730 9.400920 2.703E+05 -15.746895 13.803544 51.691176 0.000000 0.000000 0.000000 0.219336 -1.344549 2572 110 -9.6481E+00 9.400920 -0.245706 9.446408 13.493473 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610522 5 2.8768E+05 5.914742 6.190859 13.803525 14.034117 -7.052054 49.152015 0.000006 0.000002 0.436489 -0.846E+01 retry log_rel_run_E_err -7.9845660151319198 rel_E_err 8.6534778042063232D-12 k, q, energy_removed_layers before adjustment is 1252 0.99999538882970862 2.7464111007920051E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 3.9368288921628110E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.0996093750000 max vel inside fraction of cutoff 1725.1177896931654 max c/cs inside fraction of cutoff 0.61544456488812027 average v/vesc outside cutoff 0.93870736464964877 Kinetic plus potential energy outside cutoff 3.9368288921628110E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.2066930350300344 check gamma integral -1.6405456080617099E-002 retry: logT > hydro_mtx_max_allowed_logT 874 2733 retry: logT < hydro_mtx_min_allowed_logT 872 2735 retry: logT < hydro_mtx_min_allowed_logT 869 2739 2740 9.400538 2.703E+05 -15.478117 13.793794 51.691176 0.000000 0.000000 0.000000 0.219336 -1.345953 2572 113 -9.7593E+00 9.400538 -0.245797 9.442069 13.490617 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610469 6 2.8768E+05 5.913480 6.190485 13.793775 14.018913 -7.051534 49.152015 0.000006 0.000002 0.436487 -0.847E+01 max increase log_rel_run_E_err -7.9810457680440390 rel_E_err 8.2746726848200938D-12 k, q, energy_removed_layers before adjustment is 1253 0.99999532297736204 2.7949673970732639E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 3.9828969689747050E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.1640625000000 max vel inside fraction of cutoff 1729.6475704247518 max c/cs inside fraction of cutoff 0.61741362925078103 average v/vesc outside cutoff 0.94420062935774696 Kinetic plus potential energy outside cutoff 3.9828969689747050E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.2094720567133654 check gamma integral -1.6390240045313705E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 865 2743 retry: logT > hydro_mtx_max_allowed_logT 861 2747 2750 9.400152 2.703E+05 -14.748898 13.783974 51.691176 0.000000 0.000000 0.000000 0.219336 -1.347368 2572 115 -9.5696E+00 9.400152 -0.245888 9.437694 13.487736 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610415 19 2.8768E+05 5.912207 6.190108 13.783954 14.003581 -7.051010 49.152015 0.000006 0.000002 0.436485 -0.849E+01 max increase log_rel_run_E_err -7.9775378410138975 rel_E_err 9.0584658713171814D-12 save photos/x750 for model 2750 k, q, energy_removed_layers before adjustment is 1255 0.99999518879110305 2.8606378633417873E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 4.0286871573938178E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.2285156250000 max vel inside fraction of cutoff 1734.1976558759688 max c/cs inside fraction of cutoff 0.61939468734822167 average v/vesc outside cutoff 0.94967011933049150 Kinetic plus potential energy outside cutoff 4.0286871573938178E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.2269822311944445 check gamma integral -1.6374726695026081E-002 retry: logT > hydro_mtx_max_allowed_logT 857 2751 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 926 2753 retry: logT < hydro_mtx_min_allowed_logT 855 2757 2760 9.399853 2.702E+05 -15.683046 13.776365 51.691176 0.000000 0.000000 0.000000 0.219336 -1.348466 2572 118 -9.6809E+00 9.399853 -0.245958 9.434301 13.485501 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610373 6 2.8768E+05 5.911220 6.189815 13.776345 13.991688 -7.050603 49.152015 0.000006 0.000002 0.436484 -0.850E+01 max increase log_rel_run_E_err -7.9741250382544582 rel_E_err 8.0229272194587632D-12 k, q, energy_removed_layers before adjustment is 1256 0.99999512290968262 2.8995588408109941E+047 k, q, energy_removed_layers after adjustment is 1368 0.99998165907114689 4.0637543523649645E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.2792968750000 max vel inside fraction of cutoff 1737.7146723252461 max c/cs inside fraction of cutoff 0.62092812571439826 average v/vesc outside cutoff 0.95386537661944981 Kinetic plus potential energy outside cutoff 4.0637543523649645E+047 mass inside cutoff 1368 51.690227713028214 relax counter 0 log max v [km/s]= 4.2344812511946230 check gamma integral -1.6362576667907979E-002 retry: logT > hydro_mtx_max_allowed_logT 857 2764 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 854 2766 retry: logT > hydro_mtx_max_allowed_logT 853 2769 2770 9.399439 2.702E+05 -15.060100 13.765842 51.691176 0.000000 0.000000 0.000000 0.219336 -1.349985 2582 121 -9.7921E+00 9.399439 -0.246055 9.429606 13.482406 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610315 6 2.8768E+05 5.909854 6.189412 13.765822 13.975224 -7.050042 49.152015 0.000005 0.000002 0.436482 -0.852E+01 max increase log_rel_run_E_err -7.9707057128353433 rel_E_err 7.9296920602024653D-12 k, q, energy_removed_layers before adjustment is 1268 0.99999499104570899 2.9635155584580795E+047 k, q, energy_removed_layers after adjustment is 1378 0.99998165907114689 4.1116442932752868E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.3515625000000 max vel inside fraction of cutoff 1742.5657544740754 max c/cs inside fraction of cutoff 0.62304639759472902 average v/vesc outside cutoff 0.95960433685353430 Kinetic plus potential energy outside cutoff 4.1116442932752868E+047 mass inside cutoff 1378 51.690227713028214 relax counter 0 log max v [km/s]= 4.2453947995617094 check gamma integral -1.6345586249888241E-002 retry: logT > hydro_mtx_max_allowed_logT 851 2772 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 850 2776 2780 9.399123 2.702E+05 -15.585130 13.757813 51.691176 0.000000 0.000000 0.000000 0.219336 -1.351146 2582 123 -9.6024E+00 9.399123 -0.246130 9.426019 13.480041 -99.000000 51.691176 0.000000 0.044513 0.780664 0.610270 6 2.8768E+05 5.908811 6.189104 13.757793 13.962648 -7.049613 49.152015 0.000005 0.000002 0.436480 -0.853E+01 max increase log_rel_run_E_err -7.9673159164061618 rel_E_err 8.1808222895850521D-12 k, q, energy_removed_layers before adjustment is 1269 0.99999492515392052 3.0040689071913913E+047 k, q, energy_removed_layers after adjustment is 1378 0.99998165907114689 4.1477364046051334E+047 Layers above q= 0.99998165907114689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.4042968750000 max vel inside fraction of cutoff 1746.2577337664181 max c/cs inside fraction of cutoff 0.62466095705275959 average v/vesc outside cutoff 0.96393708867801065 Kinetic plus potential energy outside cutoff 4.1477364046051334E+047 mass inside cutoff 1378 51.690227713028214 relax counter 0 log max v [km/s]= 4.2570722640359868 check gamma integral -1.6332476550187085E-002 retry: logT < hydro_mtx_min_allowed_logT 842 2782 retry: logT < hydro_mtx_min_allowed_logT 840 2785 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 837 2790 2790 9.398698 2.702E+05 -15.305329 13.747005 51.691176 0.000000 0.000000 0.000000 0.219336 -1.352711 2582 126 -9.7137E+00 9.398698 -0.246230 9.421188 13.476854 -99.000000 51.691176 0.000000 0.044512 0.780664 0.610211 5 2.8768E+05 5.907406 6.188692 13.746985 13.945701 -7.049037 49.152015 0.000005 0.000002 0.436478 -0.855E+01 retry log_rel_run_E_err -7.9640161859575249 rel_E_err 8.3771902217367502D-12 k, q, energy_removed_layers before adjustment is 1271 0.99999479116157830 3.0675610496860169E+047 k, q, energy_removed_layers after adjustment is 1379 0.99998135048603665 4.1957159125654011E+047 Layers above q= 0.99998135048603665 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.4765625000000 max vel inside fraction of cutoff 1751.2141904986111 max c/cs inside fraction of cutoff 0.62683185639294781 average v/vesc outside cutoff 0.96097012032845841 Kinetic plus potential energy outside cutoff 4.1957159125654011E+047 mass inside cutoff 1379 51.690211761901040 relax counter 0 log max v [km/s]= 4.2659254811634151 check gamma integral -1.6314628725469616E-002 retry: logT < hydro_mtx_min_allowed_logT 856 2793 retry: logT > hydro_mtx_max_allowed_logT 831 2798 retry: logT < hydro_mtx_min_allowed_logT 902 2800 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 9.398260 2.701E+05 -15.115098 13.735919 51.691176 0.000000 0.000000 0.000000 0.219336 -1.354319 2582 129 -9.8249E+00 9.398260 -0.246332 9.416226 13.473580 -99.000000 51.691176 0.000000 0.044512 0.780664 0.610149 5 2.8768E+05 5.905962 6.188267 13.735898 13.928293 -7.048447 49.152015 0.000005 0.000002 0.436476 -0.857E+01 retry log_rel_run_E_err -7.9606841021103874 rel_E_err 8.2374061492270102D-12 save LOGS/profile14.data for model 2800 save photos/x800 for model 2800 k, q, energy_removed_layers before adjustment is 1272 0.99999472599048966 3.1136984242903884E+047 k, q, energy_removed_layers after adjustment is 1379 0.99998135048603665 4.2443889144335300E+047 Layers above q= 0.99998135048603665 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.5507812500000 max vel inside fraction of cutoff 1756.2829791200859 max c/cs inside fraction of cutoff 0.62905592578117919 average v/vesc outside cutoff 0.96674586387392869 Kinetic plus potential energy outside cutoff 4.2443889144335300E+047 mass inside cutoff 1379 51.690211761901040 relax counter 0 log max v [km/s]= 4.2788486553496883 check gamma integral -1.6296079856499040E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 900 2803 retry: logT > hydro_mtx_max_allowed_logT 823 2807 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 832 2809 2810 9.397964 2.701E+05 -15.153598 13.728413 51.691176 0.000000 0.000000 0.000000 0.219336 -1.355408 2582 132 -9.9362E+00 9.397964 -0.246402 9.412864 13.471360 -99.000000 51.691176 0.000000 0.044512 0.780664 0.610107 5 2.8768E+05 5.904984 6.187977 13.728392 13.916495 -7.048047 49.152015 0.000005 0.000002 0.436475 -0.858E+01 max increase log_rel_run_E_err -7.9573751340480019 rel_E_err 8.3345452556876862D-12 k, q, energy_removed_layers before adjustment is 1274 0.99999459345328856 3.1677633631617693E+047 k, q, energy_removed_layers after adjustment is 1379 0.99998135048603665 4.2769463202535045E+047 Layers above q= 0.99998135048603665 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.6035156250000 max vel inside fraction of cutoff 1759.7061643097802 max c/cs inside fraction of cutoff 0.63056019130394281 average v/vesc outside cutoff 0.97061668483769525 Kinetic plus potential energy outside cutoff 4.2769463202535045E+047 mass inside cutoff 1379 51.690211761901040 relax counter 0 log max v [km/s]= 4.2799579630293589 check gamma integral -1.6283382828730951E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 818 2813 retry: logT < hydro_mtx_min_allowed_logT 815 2818 2820 9.397684 2.701E+05 -15.366000 13.721337 51.691176 0.000000 0.000000 0.000000 0.219336 -1.356437 2582 134 -9.7465E+00 9.397684 -0.246468 9.409692 13.469266 -99.000000 51.691176 0.000000 0.044512 0.780664 0.610068 7 2.8768E+05 5.904061 6.187706 13.721316 13.905362 -7.047671 49.152015 0.000005 0.000002 0.436474 -0.859E+01 max increase log_rel_run_E_err -7.9541071543818997 rel_E_err 8.1870480313931699D-12 k, q, energy_removed_layers before adjustment is 1275 0.99999452607522843 3.2040469382028924E+047 k, q, energy_removed_layers after adjustment is 1380 0.99998116602371945 4.3074590359030355E+047 Layers above q= 0.99998116602371945 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.6503906250000 max vel inside fraction of cutoff 1762.9269015882521 max c/cs inside fraction of cutoff 0.63197717048519841 average v/vesc outside cutoff 0.97204072982134304 Kinetic plus potential energy outside cutoff 4.3074590359030355E+047 mass inside cutoff 1380 51.690202226826976 relax counter 0 log max v [km/s]= 4.2940858548092526 check gamma integral -1.6271309985800491E-002 retry: logT < hydro_mtx_min_allowed_logT 842 2821 retry: logT > hydro_mtx_max_allowed_logT 810 2825 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 836 2829 2830 9.397418 2.701E+05 -15.957993 13.714600 51.691176 0.000000 0.000000 0.000000 0.219336 -1.357416 2582 137 -9.8577E+00 9.397418 -0.246530 9.406670 13.467269 -99.000000 51.691176 0.000000 0.044512 0.780664 0.610031 5 2.8768E+05 5.903182 6.187448 13.714578 13.894754 -7.047312 49.152015 0.000005 0.000002 0.436472 -0.860E+01 max increase log_rel_run_E_err -7.9508396249436126 rel_E_err 8.5743170781256289D-12 k, q, energy_removed_layers before adjustment is 1276 0.99999446082475441 3.2396956246905585E+047 k, q, energy_removed_layers after adjustment is 1380 0.99998116602371945 4.3362592232497314E+047 Layers above q= 0.99998116602371945 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.6972656250000 max vel inside fraction of cutoff 1765.9877819305232 max c/cs inside fraction of cutoff 0.63332533171346528 average v/vesc outside cutoff 0.97544499587756295 Kinetic plus potential energy outside cutoff 4.3362592232497314E+047 mass inside cutoff 1380 51.690202226826976 relax counter 0 log max v [km/s]= 4.3001546927706951 check gamma integral -1.6259720840060984E-002 retry: logT < hydro_mtx_min_allowed_logT 803 2833 retry: logT < hydro_mtx_min_allowed_logT 800 2838 2840 9.397082 2.700E+05 -15.303428 13.706107 51.691176 0.000000 0.000000 0.000000 0.219336 -1.358653 2582 139 -9.6680E+00 9.397082 -0.246609 9.402857 13.464750 -99.000000 51.691176 0.000000 0.044512 0.780664 0.609983 7 2.8768E+05 5.902072 6.187123 13.706086 13.881370 -7.046861 49.152015 0.000005 0.000002 0.436471 -0.862E+01 max increase log_rel_run_E_err -7.9475805646965494 rel_E_err 8.7001564838392944D-12 k, q, energy_removed_layers before adjustment is 1277 0.99999439488408592 3.2798853582777469E+047 k, q, energy_removed_layers after adjustment is 1381 0.99998098003107327 4.3720786438045469E+047 Layers above q= 0.99998098003107327 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.7519531250000 max vel inside fraction of cutoff 1769.8377440185288 max c/cs inside fraction of cutoff 0.63502316014750848 average v/vesc outside cutoff 0.97746383774127621 Kinetic plus potential energy outside cutoff 4.3720786438045469E+047 mass inside cutoff 1381 51.690192612648417 relax counter 0 log max v [km/s]= 4.3044785950358335 check gamma integral -1.6244983493898277E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 826 2841 retry: logT < hydro_mtx_min_allowed_logT 840 2847 2850 9.396800 2.700E+05 -15.452250 13.698978 51.691176 0.000000 0.000000 0.000000 0.219336 -1.359692 2582 141 -9.7950E+00 9.396800 -0.246675 9.399654 13.462633 -99.000000 51.691176 0.000000 0.044512 0.780664 0.609944 6 2.8768E+05 5.901141 6.186851 13.698957 13.870125 -7.046482 49.152015 0.000005 0.000001 0.436470 -0.863E+01 max increase log_rel_run_E_err -7.9443762862159444 rel_E_err 8.5428576226133105D-12 save photos/x850 for model 2850 k, q, energy_removed_layers before adjustment is 1278 0.99999432824465928 3.3159967950480876E+047 k, q, energy_removed_layers after adjustment is 1382 0.99998079254013816 4.4015587595635140E+047 Layers above q= 0.99998079254013816 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.7988281250000 max vel inside fraction of cutoff 1773.0626040702900 max c/cs inside fraction of cutoff 0.63644711630020212 average v/vesc outside cutoff 0.97873908748220084 Kinetic plus potential energy outside cutoff 4.4015587595635140E+047 mass inside cutoff 1382 51.690182921021531 relax counter 0 log max v [km/s]= 4.3037473872418817 check gamma integral -1.6232500063249163E-002 retry: logT < hydro_mtx_min_allowed_logT 838 2853 retry: logT > hydro_mtx_max_allowed_logT 784 2859 2860 9.396470 2.700E+05 -14.609008 13.690666 51.691176 0.000000 0.000000 0.000000 0.219336 -1.360904 2582 143 -9.7636E+00 9.396470 -0.246752 9.395917 13.460161 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609897 6 2.8768E+05 5.900053 6.186533 13.690644 13.857001 -7.046041 49.152015 0.000005 0.000001 0.436469 -0.864E+01 max increase log_rel_run_E_err -7.9412638080584594 rel_E_err 8.4903795309110502D-12 k, q, energy_removed_layers before adjustment is 1279 0.99999426098887856 3.3508705235921068E+047 k, q, energy_removed_layers after adjustment is 1384 0.99998041287156647 4.4353217027441790E+047 Layers above q= 0.99998041287156647 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.8535156250000 max vel inside fraction of cutoff 1776.8150548967310 max c/cs inside fraction of cutoff 0.63810612350763662 average v/vesc outside cutoff 0.97826258096274255 Kinetic plus potential energy outside cutoff 4.4353217027441790E+047 mass inside cutoff 1384 51.690163295506657 relax counter 0 log max v [km/s]= 4.3064320271104011 check gamma integral -1.6217814152006897E-002 retry: logT > hydro_mtx_max_allowed_logT 781 2862 retry: logT > hydro_mtx_max_allowed_logT 777 2868 2870 9.396074 2.700E+05 -14.595520 13.680672 51.691176 0.000000 0.000000 0.000000 0.219336 -1.362364 2582 145 -9.5738E+00 9.396074 -0.246844 9.391420 13.457186 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609842 6 2.8768E+05 5.898744 6.186151 13.680650 13.841207 -7.045512 49.152015 0.000005 0.000001 0.436467 -0.866E+01 max increase log_rel_run_E_err -7.9381305889561631 rel_E_err 8.4137549755548235D-12 k, q, energy_removed_layers before adjustment is 1281 0.99999414770712558 3.4016367699669169E+047 k, q, energy_removed_layers after adjustment is 1385 0.99998022069884240 4.4751273457610690E+047 Layers above q= 0.99998022069884240 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.9179687500000 max vel inside fraction of cutoff 1781.3147877068648 max c/cs inside fraction of cutoff 0.64009849158540444 average v/vesc outside cutoff 0.98073184101715483 Kinetic plus potential energy outside cutoff 4.4751273457610690E+047 mass inside cutoff 1385 51.690153361872596 relax counter 0 log max v [km/s]= 4.3085785914633954 check gamma integral -1.6199974614371049E-002 retry: logT < hydro_mtx_min_allowed_logT 773 2872 retry: logT < hydro_mtx_min_allowed_logT 769 2875 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 780 2878 2880 9.395671 2.699E+05 -15.459176 13.670515 51.691176 0.000000 0.000000 0.000000 0.219336 -1.363849 2582 148 -9.6851E+00 9.395671 -0.246938 9.386845 13.454158 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609785 6 2.8768E+05 5.897413 6.185758 13.670493 13.825136 -7.044974 49.152015 0.000005 0.000001 0.436466 -0.867E+01 max increase log_rel_run_E_err -7.9350064210647773 rel_E_err 7.9771711351094855D-12 k, q, energy_removed_layers before adjustment is 1282 0.99999409047420751 3.4372619531785107E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.5154560433566177E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8318.9843750000000 max vel inside fraction of cutoff 1785.8754506790308 max c/cs inside fraction of cutoff 0.64212114144076260 average v/vesc outside cutoff 0.98128981621555278 Kinetic plus potential energy outside cutoff 4.5154560433566177E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3058485841434297 check gamma integral -1.6181634760926527E-002 retry: logT < hydro_mtx_min_allowed_logT 772 2881 retry: logT > hydro_mtx_max_allowed_logT 764 2884 retry: logT > hydro_mtx_max_allowed_logT 761 2888 2890 9.395402 2.699E+05 -16.054325 13.663741 51.691176 0.000000 0.000000 0.000000 0.219336 -1.364841 2582 151 -9.7964E+00 9.395402 -0.247001 9.383791 13.452136 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609747 6 2.8768E+05 5.896524 6.185498 13.663718 13.814407 -7.044615 49.152015 0.000005 0.000001 0.436465 -0.869E+01 max increase log_rel_run_E_err -7.9318818137952611 rel_E_err 8.7473230624271314D-12 k, q, energy_removed_layers before adjustment is 1284 0.99999397461602646 3.4765448310415981E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.5417420428483849E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.0292968750000 max vel inside fraction of cutoff 1788.9104342593105 max c/cs inside fraction of cutoff 0.64346897682071813 average v/vesc outside cutoff 0.98435170068466649 Kinetic plus potential energy outside cutoff 4.5417420428483849E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3065557018475573 check gamma integral -1.6169285243147077E-002 retry: logT > hydro_mtx_max_allowed_logT 758 2892 retry: logT > hydro_mtx_max_allowed_logT 822 2896 retry: logT < hydro_mtx_min_allowed_logT 751 2900 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 9.395105 2.699E+05 -16.024992 13.656278 51.691176 0.000000 0.000000 0.000000 0.219336 -1.365934 2582 154 -9.9077E+00 9.395105 -0.247070 9.380424 13.449907 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609705 5 2.8768E+05 5.895545 6.185211 13.656255 13.802578 -7.044219 49.152015 0.000005 0.000001 0.436464 -0.870E+01 retry log_rel_run_E_err -7.9287934700335407 rel_E_err 8.4939484354954535D-12 save LOGS/profile15.data for model 2900 save photos/x900 for model 2900 k, q, energy_removed_layers before adjustment is 1285 0.99999391599496334 3.5049778881266575E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.5700298755083899E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.0781250000000 max vel inside fraction of cutoff 1792.2474166802904 max c/cs inside fraction of cutoff 0.64495264614508530 average v/vesc outside cutoff 0.98768677550047534 Kinetic plus potential energy outside cutoff 4.5700298755083899E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3045814134837013 check gamma integral -1.6155572688053278E-002 retry: logT < hydro_mtx_min_allowed_logT 764 2905 retry: logT < hydro_mtx_min_allowed_logT 838 2908 2910 9.394757 2.698E+05 -15.358336 13.647539 51.691176 0.000000 0.000000 0.000000 0.219336 -1.367216 2582 156 -9.7179E+00 9.394757 -0.247151 9.376478 13.447293 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609656 6 2.8768E+05 5.894396 6.184876 13.647516 13.788714 -7.043756 49.152015 0.000005 0.000001 0.436462 -0.871E+01 max increase log_rel_run_E_err -7.9257236702026805 rel_E_err 7.9962849420810405D-12 k, q, energy_removed_layers before adjustment is 1286 0.99999385682317488 3.5355597237639412E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.6027229982362864E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.1347656250000 max vel inside fraction of cutoff 1796.1464225394336 max c/cs inside fraction of cutoff 0.64668848463561790 average v/vesc outside cutoff 0.99155652993634535 Kinetic plus potential energy outside cutoff 4.6027229982362864E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3061418574873578 check gamma integral -1.6139369383120168E-002 retry: logT > hydro_mtx_max_allowed_logT 742 2912 retry: logT > hydro_mtx_max_allowed_logT 739 2916 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 832 2920 2920 9.394400 2.698E+05 -15.727436 13.638581 51.691176 0.000000 0.000000 0.000000 0.219336 -1.368532 2582 159 -9.8292E+00 9.394400 -0.247235 9.372430 13.444610 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609606 6 2.8768E+05 5.893218 6.184532 13.638557 13.774487 -7.043281 49.152015 0.000005 0.000001 0.436461 -0.873E+01 retry log_rel_run_E_err -7.9226974480360353 rel_E_err 8.2880119649817069D-12 k, q, energy_removed_layers before adjustment is 1288 0.99999373578152329 3.5782424867085918E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.6354471420676888E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.1933593750000 max vel inside fraction of cutoff 1800.1336775938096 max c/cs inside fraction of cutoff 0.64846615732353374 average v/vesc outside cutoff 0.99547426995262411 Kinetic plus potential energy outside cutoff 4.6354471420676888E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3051536975067073 check gamma integral -1.6122596585821637E-002 retry: logT < hydro_mtx_min_allowed_logT 810 2924 retry: logT < hydro_mtx_min_allowed_logT 776 2928 2930 9.394031 2.698E+05 -16.105487 13.629305 51.691176 0.000000 0.000000 0.000000 0.219336 -1.369895 2582 161 -9.7978E+00 9.394031 -0.247321 9.368235 13.441828 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609553 5 2.8768E+05 5.891997 6.184177 13.629281 13.759742 -7.042791 49.152015 0.000005 0.000001 0.436460 -0.874E+01 hold log_rel_run_E_err -7.9197002088267379 rel_E_err 8.4862933190934697D-12 k, q, energy_removed_layers before adjustment is 1290 0.99999361149258947 3.6231796677924214E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.6687737479996787E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.2558593750000 max vel inside fraction of cutoff 1804.2519294925892 max c/cs inside fraction of cutoff 0.65030494555656593 average v/vesc outside cutoff 0.99948796770773307 Kinetic plus potential energy outside cutoff 4.6687737479996787E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3052245414719188 check gamma integral -1.6105055727729554E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 728 2934 retry: logT < hydro_mtx_min_allowed_logT 722 2939 2940 9.393579 2.698E+05 -15.445731 13.617985 51.691176 0.000000 0.000000 0.000000 0.219336 -1.371562 2582 163 -9.6080E+00 9.393579 -0.247426 9.363110 13.438429 -99.000000 51.691176 0.000000 0.044511 0.780664 0.609490 6 2.8768E+05 5.890506 6.183742 13.617960 13.741727 -7.042192 49.152015 0.000005 0.000001 0.436459 -0.876E+01 max increase log_rel_run_E_err -7.9167367419999604 rel_E_err 8.0232770183821068D-12 k, q, energy_removed_layers before adjustment is 1291 0.99999354856931344 3.6647976889399163E+047 k, q, energy_removed_layers after adjustment is 1388 0.99997952794110812 4.7087733097024536E+047 Layers above q= 0.99997952794110812 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.3320312500000 max vel inside fraction of cutoff 1809.2637617992184 max c/cs inside fraction of cutoff 0.65254646672124594 average v/vesc outside cutoff 1.0043309039284007 Kinetic plus potential energy outside cutoff 4.7087733097024536E+047 mass inside cutoff 1388 51.690117552410783 relax counter 0 log max v [km/s]= 4.3079081673678985 check gamma integral -1.6083405434496961E-002 retry: logT < hydro_mtx_min_allowed_logT 722 2942 retry: logT < hydro_mtx_min_allowed_logT 716 2947 2950 9.393045 2.697E+05 -15.627152 13.604617 51.691176 0.000000 0.000000 0.000000 0.219336 -1.373532 2582 165 -9.4183E+00 9.393045 -0.247550 9.357051 13.434407 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609414 9 2.8768E+05 5.888742 6.183228 13.604593 13.720426 -7.041486 49.152015 0.000005 0.000001 0.436457 -0.878E+01 max increase log_rel_run_E_err -7.9137497247030337 rel_E_err 8.5813494250739750D-12 save photos/x950 for model 2950 k, q, energy_removed_layers before adjustment is 1293 0.99999337654297182 3.7272173979345577E+047 k, q, energy_removed_layers after adjustment is 1389 0.99997922096463865 4.7552884315913576E+047 Layers above q= 0.99997922096463865 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.4199218750000 max vel inside fraction of cutoff 1815.1619351293564 max c/cs inside fraction of cutoff 0.65518969222293344 average v/vesc outside cutoff 1.0045554533359367 Kinetic plus potential energy outside cutoff 4.7552884315913576E+047 mass inside cutoff 1389 51.690101684436137 relax counter 0 log max v [km/s]= 4.3106592231568364 check gamma integral -1.6057498155909799E-002 retry: logT < hydro_mtx_min_allowed_logT 713 2951 retry: adjust_correction failed in eval_equations -- give up in solver 2954 retry: logT > hydro_mtx_max_allowed_logT 706 2956 retry: logT < hydro_mtx_min_allowed_logT 705 2960 2960 9.392629 2.697E+05 -15.884408 13.594200 51.691176 0.000000 0.000000 0.000000 0.219336 -1.375071 2582 169 -9.8306E+00 9.392629 -0.247646 9.352323 13.431268 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609355 5 2.8768E+05 5.887367 6.182827 13.594175 13.703804 -7.040936 49.152015 0.000005 0.000001 0.436456 -0.880E+01 retry log_rel_run_E_err -7.9107947548506390 rel_E_err 8.3473949737007142D-12 k, q, energy_removed_layers before adjustment is 1294 0.99999328911831709 3.7634224035315620E+047 k, q, energy_removed_layers after adjustment is 1389 0.99997922096463865 4.7901330724501978E+047 Layers above q= 0.99997922096463865 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.4863281250000 max vel inside fraction of cutoff 1819.7439085531159 max c/cs inside fraction of cutoff 0.65724698215176047 average v/vesc outside cutoff 1.0088365799789492 Kinetic plus potential energy outside cutoff 4.7901330724501978E+047 mass inside cutoff 1389 51.690101684436137 relax counter 0 log max v [km/s]= 4.3047363108013883 check gamma integral -1.6037049304630270E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 700 2964 retry: logT > hydro_mtx_max_allowed_logT 697 2968 2970 9.392237 2.697E+05 -15.464044 13.584423 51.691176 0.000000 0.000000 0.000000 0.219336 -1.376516 2582 171 -9.6408E+00 9.392237 -0.247737 9.347882 13.428318 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609300 6 2.8768E+05 5.886074 6.182452 13.584397 13.688187 -7.040419 49.152015 0.000005 0.000001 0.436455 -0.882E+01 max increase log_rel_run_E_err -7.9078946772724690 rel_E_err 7.8862958518994204D-12 k, q, energy_removed_layers before adjustment is 1295 0.99999320064347930 3.7933384831608135E+047 k, q, energy_removed_layers after adjustment is 1389 0.99997922096463865 4.8228847793288408E+047 Layers above q= 0.99997922096463865 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.5507812500000 max vel inside fraction of cutoff 1824.0330112304971 max c/cs inside fraction of cutoff 0.65917590182700669 average v/vesc outside cutoff 1.0128302257299682 Kinetic plus potential energy outside cutoff 4.8228847793288408E+047 mass inside cutoff 1389 51.690101684436137 relax counter 0 log max v [km/s]= 4.3074321903994024 check gamma integral -1.6017650139668285E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2972 retry: logT > hydro_mtx_max_allowed_logT 690 2976 2980 9.391772 2.696E+05 -16.130023 13.572800 51.691176 0.000000 0.000000 0.000000 0.219336 -1.378237 2582 173 -9.4511E+00 9.391772 -0.247845 9.342597 13.424805 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609234 10 2.8768E+05 5.884536 6.182007 13.572775 13.669602 -7.039807 49.152015 0.000005 0.000001 0.436453 -0.884E+01 max increase log_rel_run_E_err -7.9050209436975223 rel_E_err 7.8049347719772618D-12 k, q, energy_removed_layers before adjustment is 1297 0.99999306917993847 3.8385150763747616E+047 k, q, energy_removed_layers after adjustment is 1390 0.99997895818028792 4.8612150987773477E+047 Layers above q= 0.99997895818028792 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.6289062500000 max vel inside fraction of cutoff 1829.1164943153453 max c/cs inside fraction of cutoff 0.66146604138545695 average v/vesc outside cutoff 1.0143513884937434 Kinetic plus potential energy outside cutoff 4.8612150987773477E+047 mass inside cutoff 1390 51.690088100804076 relax counter 0 log max v [km/s]= 4.3101581483830707 check gamma integral -1.5994328972239825E-002 retry: logT > hydro_mtx_max_allowed_logT 685 2981 retry: logT < hydro_mtx_min_allowed_logT 680 2985 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 677 2989 2990 9.391229 2.696E+05 -15.218381 13.559265 51.691176 0.000000 0.000000 0.000000 0.219336 -1.380244 2582 176 -9.5624E+00 9.391229 -0.247971 9.336434 13.420707 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609157 6 2.8768E+05 5.882742 6.181489 13.559239 13.647931 -7.039094 49.152015 0.000005 0.000001 0.436452 -0.886E+01 max increase log_rel_run_E_err -7.9021735030362450 rel_E_err 8.4830516023785369D-12 k, q, energy_removed_layers before adjustment is 1300 0.99999287094811429 3.8943805199379349E+047 k, q, energy_removed_layers after adjustment is 1390 0.99997895818028792 4.9047327179835741E+047 Layers above q= 0.99997895818028792 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.7167968750000 max vel inside fraction of cutoff 1835.0165440445053 max c/cs inside fraction of cutoff 0.66412945878609442 average v/vesc outside cutoff 1.0196999323507956 Kinetic plus potential energy outside cutoff 4.9047327179835741E+047 mass inside cutoff 1390 51.690088100804076 relax counter 0 log max v [km/s]= 4.3081221371187191 check gamma integral -1.5966808656192176E-002 retry: logT > hydro_mtx_max_allowed_logT 673 2993 retry: logT < hydro_mtx_min_allowed_logT 671 2997 retry: logT < hydro_mtx_min_allowed_logT 666 3000 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 9.390631 2.695E+05 -15.451405 13.544390 51.691176 0.000000 0.000000 0.000000 0.219336 -1.382453 2582 179 -9.6736E+00 9.390631 -0.248109 9.329653 13.416195 -99.000000 51.691176 0.000000 0.044510 0.780664 0.609073 5 2.8768E+05 5.880768 6.180915 13.544363 13.624079 -7.038313 49.152015 0.000005 0.000001 0.436451 -0.889E+01 retry log_rel_run_E_err -7.8993303444644845 rel_E_err 8.1720976361394855D-12 save LOGS/profile16.data for model 3000 save photos/3000 for model 3000 k, q, energy_removed_layers before adjustment is 1303 0.99999267437175610 3.9486931070884777E+047 k, q, energy_removed_layers after adjustment is 1390 0.99997895818028792 4.9516330345071797E+047 Layers above q= 0.99997895818028792 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.8164062500000 max vel inside fraction of cutoff 1841.4759086353642 max c/cs inside fraction of cutoff 0.66705205230566988 average v/vesc outside cutoff 1.0254963431059356 Kinetic plus potential energy outside cutoff 4.9516330345071797E+047 mass inside cutoff 1390 51.690088100804076 relax counter 0 log max v [km/s]= 4.3065075204573287 check gamma integral -1.5936114507032511E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 662 3004 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 854 3010 3010 9.389966 2.695E+05 -15.982198 13.527863 51.691176 0.000000 0.000000 0.000000 0.219336 -1.384913 2582 181 -9.4839E+00 9.389966 -0.248263 9.322107 13.411171 -99.000000 51.691176 0.000000 0.044510 0.780664 0.608978 5 2.8768E+05 5.878572 6.180279 13.527836 13.597539 -7.037443 49.152015 0.000005 0.000001 0.436449 -0.891E+01 retry log_rel_run_E_err -7.8964624028525092 rel_E_err 8.2401824721793044D-12 k, q, energy_removed_layers before adjustment is 1306 0.99999247348995168 4.0061354480764586E+047 k, q, energy_removed_layers after adjustment is 1391 0.99997869275944218 5.0030275151848588E+047 Layers above q= 0.99997869275944218 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8319.9238281250000 max vel inside fraction of cutoff 1848.6217457464263 max c/cs inside fraction of cutoff 0.67029344527202217 average v/vesc outside cutoff 1.0285950667318078 Kinetic plus potential energy outside cutoff 5.0030275151848588E+047 mass inside cutoff 1391 51.690074380888476 relax counter 0 log max v [km/s]= 4.3103991246139168 check gamma integral -1.5901462680064777E-002 retry: logT > hydro_mtx_max_allowed_logT 654 3014 retry: logT < hydro_mtx_min_allowed_logT 794 3018 3020 9.389084 2.694E+05 -15.806551 13.505968 51.691176 0.000000 0.000000 0.000000 0.219336 -1.388179 2582 183 -9.2941E+00 9.389084 -0.248466 9.312091 13.404496 -99.000000 51.691176 0.000000 0.044510 0.780664 0.608853 8 2.8768E+05 5.875656 6.179435 13.505941 13.562311 -7.036292 49.152015 0.000005 0.000001 0.436447 -0.895E+01 max increase log_rel_run_E_err -7.8936708536065394 rel_E_err 8.2198957591738786D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999227386456047 4.0876506113131039E+047 k, q, energy_removed_layers after adjustment is 1391 0.99997869275944218 5.0698482979836354E+047 Layers above q= 0.99997869275944218 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.0664062500000 max vel inside fraction of cutoff 1858.0394468792895 max c/cs inside fraction of cutoff 0.67457865453999744 average v/vesc outside cutoff 1.0368135611158324 Kinetic plus potential energy outside cutoff 5.0698482979836354E+047 mass inside cutoff 1391 51.690074380888476 relax counter 0 log max v [km/s]= 4.3128639629417354 check gamma integral -1.5854650068315008E-002 retry: logT < hydro_mtx_min_allowed_logT 646 3021 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 640 3025 retry: logT < hydro_mtx_min_allowed_logT 658 3029 3030 9.388294 2.694E+05 -15.902301 13.486397 51.691176 0.000000 0.000000 0.000000 0.219336 -1.391106 2582 186 -9.4054E+00 9.388294 -0.248648 9.303120 13.398513 -99.000000 51.691176 0.000000 0.044509 0.780664 0.608741 6 2.8768E+05 5.873045 6.178680 13.486368 13.530759 -7.035262 49.152015 0.000005 0.000001 0.436446 -0.898E+01 max increase log_rel_run_E_err -7.8908906298359183 rel_E_err 8.1296065928400662D-12 k, q, energy_removed_layers before adjustment is 1310 0.99999200869753702 4.1666399912537579E+047 k, q, energy_removed_layers after adjustment is 1391 0.99997869275944218 5.1273907263911125E+047 Layers above q= 0.99997869275944218 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.1933593750000 max vel inside fraction of cutoff 1866.4116271457708 max c/cs inside fraction of cutoff 0.67840075888071893 average v/vesc outside cutoff 1.0440004318880529 Kinetic plus potential energy outside cutoff 5.1273907263911125E+047 mass inside cutoff 1391 51.690074380888476 relax counter 0 log max v [km/s]= 4.3101219891734033 check gamma integral -1.5811929076741810E-002 retry: logT < hydro_mtx_min_allowed_logT 670 3034 retry: logT < hydro_mtx_min_allowed_logT 629 3036 retry: adjust_correction failed in eval_equations -- give up in solver 3039 3040 9.387465 2.693E+05 -16.040168 13.465880 51.691176 0.000000 0.000000 0.000000 0.219336 -1.394182 2582 189 -9.5167E+00 9.387464 -0.248839 9.293697 13.392224 -99.000000 51.691176 0.000000 0.044509 0.780664 0.608623 6 2.8768E+05 5.870303 6.177886 13.465851 13.497621 -7.034185 49.152015 0.000005 0.000001 0.436444 -0.902E+01 max increase log_rel_run_E_err -7.8881136884491729 rel_E_err 8.0326655334897846D-12 k, q, energy_removed_layers before adjustment is 1311 0.99999187521173005 4.2228479424564276E+047 k, q, energy_removed_layers after adjustment is 1392 0.99997842458329522 5.1866428764547112E+047 Layers above q= 0.99997842458329522 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.3300781250000 max vel inside fraction of cutoff 1875.1409752802053 max c/cs inside fraction of cutoff 0.68239875686668150 average v/vesc outside cutoff 1.0480382572359388 Kinetic plus potential energy outside cutoff 5.1866428764547112E+047 mass inside cutoff 1392 51.690060518548123 relax counter 0 log max v [km/s]= 4.3078998392424648 check gamma integral -1.5766250686993256E-002 retry: aogT > hydro hydro_mtx_max_allowe 618 622 3044 retry: logT < hydro_mtx_min_allowed_logT 620 3048 3050 9.386637 2.692E+05 -16.084964 13.445453 51.691176 0.000000 0.000000 0.000000 0.219336 -1.397253 2582 191 -9.3269E+00 9.386636 -0.249030 9.284297 13.385943 -99.000000 51.691176 0.000000 0.044509 0.780664 0.608506 6 2.8768E+05 5.867567 6.177097 13.445423 13.464566 -7.033112 49.152015 0.000005 0.000001 0.436443 -0.905E+01 max increase log_rel_run_E_err -7.8853659304482413 rel_E_err 8.0254953964814833D-12 save photos/x050 for model 3050 k, q, energy_removed_layers before adjustment is 1313 0.99999161357303457 4.3010982986028388E+047 k, q, energy_removed_layers after adjustment is 1392 0.99997842458329522 5.2447686692389489E+047 Layers above q= 0.99997842458329522 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.4609375000000 max vel inside fraction of cutoff 1883.7852577560250 max c/cs inside fraction of cutoff 0.68637073126426018 average v/vesc outside cutoff 1.0552494888938964 Kinetic plus potential energy outside cutoff 5.2447686692389489E+047 mass inside cutoff 1392 51.690060518548123 relax counter 0 log max v [km/s]= 4.3116293360408724 check gamma integral -1.5719854210613188E-002 retry: logT < hydro_mtx_min_allowed_logT 614 3052 retry: logT < hydro_mtx_min_allowed_logT 603 3057 3060 9.385582 2.691E+05 -16.057322 13.419434 51.691176 0.000000 0.000000 0.000000 0.219336 -1.401174 2582 193 -9.1372E+00 9.385579 -0.249272 9.272298 13.377919 -99.000000 51.691176 0.000000 0.044509 0.780664 0.608355 6 2.8768E+05 5.864074 6.176095 13.419403 13.422378 -7.031747 49.152015 0.000005 0.000001 0.436441 -0.910E+01 max increase log_rel_run_E_err -7.8826770821653840 rel_E_err 8.0557728044951758D-12 k, q, energy_removed_layers before adjustment is 1315 0.99999134503903031 4.3835746648692008E+047 k, q, energy_removed_layers after adjustment is 1393 0.99997815341469609 5.3173083158412693E+047 Layers above q= 0.99997815341469609 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.6289062500000 max vel inside fraction of cutoff 1894.7259499807108 max c/cs inside fraction of cutoff 0.69141669913377402 average v/vesc outside cutoff 1.0604059105793067 Kinetic plus potential energy outside cutoff 5.3173083158412693E+047 mass inside cutoff 1393 51.690046501524400 relax counter 0 log max v [km/s]= 4.3167744749777190 check gamma integral -1.5659430395081501E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 608 3062 retry: logT < hydro_mtx_min_allowed_logT 642 3065 retry: logT < hydro_mtx_min_allowed_logT 622 3069 3070 9.384341 2.691E+05 -16.044670 13.388952 51.691176 0.000000 0.000000 0.000000 0.219336 -1.405784 2582 196 -9.2485E+00 9.384338 -0.249557 9.258201 13.368481 -99.000000 51.691176 0.000000 0.044509 0.780664 0.608179 6 2.8768E+05 5.859972 6.174921 13.388920 13.372836 -7.030154 49.152015 0.000005 0.000001 0.436439 -0.915E+01 max increase log_rel_run_E_err -7.8799835654498933 rel_E_err 8.1992690106197966D-12 k, q, energy_removed_layers before adjustment is 1318 0.99999099918614043 4.4817592163296707E+047 k, q, energy_removed_layers after adjustment is 1395 0.99997762526437761 5.3991776318516679E+047 Layers above q= 0.99997762526437761 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8320.8261718750000 max vel inside fraction of cutoff 1907.4459774774468 max c/cs inside fraction of cutoff 0.69730989628146200 average v/vesc outside cutoff 1.0639664451196158 Kinetic plus potential energy outside cutoff 5.3991776318516679E+047 mass inside cutoff 1395 51.690019200813452 relax counter 0 log max v [km/s]= 4.3132720867525922 check gamma integral -1.5586724558883424E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 582 3073 retry: logT < hydro_mtx_min_allowed_logT 568 3077 3080 9.382981 2.689E+05 -15.522934 13.355614 51.691176 0.000000 0.000000 0.000000 0.219336 -1.410845 2582 198 -9.0587E+00 9.382976 -0.249868 9.242738 13.358114 -99.000000 51.691176 0.000000 0.044509 0.780664 0.607985 7 2.8768E+05 5.855471 6.173635 13.355580 13.318511 -7.028415 49.152015 0.000005 0.000001 0.436437 -0.921E+01 max increase log_rel_run_E_err -7.8772843129729981 rel_E_err 8.5258070848769153D-12 k, q, energy_removed_layers before adjustment is 1322 0.99999062670513927 4.5768459253142296E+047 k, q, energy_removed_layers after adjustment is 1398 0.99997672139852267 5.4889458458457655E+047 Layers above q= 0.99997672139852267 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8321.0410156250000 max vel inside fraction of cutoff 1921.2388756047844 max c/cs inside fraction of cutoff 0.70373271051329311 average v/vesc outside cutoff 1.0666664765274094 Kinetic plus potential energy outside cutoff 5.4889458458457655E+047 mass inside cutoff 1398 51.689972478924673 relax counter 0 log max v [km/s]= 4.3190834821716049 check gamma integral -1.5504821162400787E-002 retry: logT < hydro_mtx_min_allowed_logT 561 3081 retry: logT < hydro_mtx_min_allowed_logT 567 3086 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 546 3090 3090 9.381359 2.688E+05 -16.540755 13.316001 51.691176 0.000000 0.000000 0.000000 0.219336 -1.416884 2582 201 -9.1700E+00 9.381354 -0.250239 9.224299 13.345734 -99.000000 51.691176 0.000000 0.044509 0.780664 0.607753 5 2.8768E+05 5.850106 6.172077 13.315965 13.253784 -7.026342 49.152015 0.000005 0.000001 0.436435 -0.928E+01 retry log_rel_run_E_err -7.8746583618499120 rel_E_err 8.0046580257222478D-12 k, q, energy_removed_layers before adjustment is 1327 0.99999011501178026 4.7050160674763542E+047 k, q, energy_removed_layers after adjustment is 1399 0.99997635220294290 5.5916984583165656E+047 Layers above q= 0.99997635220294290 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8321.2968750000000 max vel inside fraction of cutoff 1937.4658434504249 max c/cs inside fraction of cutoff 0.71133307005168323 average v/vesc outside cutoff 1.0743914972562334 Kinetic plus potential energy outside cutoff 5.5916984583165656E+047 mass inside cutoff 1399 51.689953394771052 relax counter 0 log max v [km/s]= 4.3147866905545689 check gamma integral -1.5404227755222061E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 538 3094 retry: logT > hydro_mtx_max_allowed_logT 624 3099 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 9.379318 2.687E+05 -16.153808 13.266320 51.691176 0.000000 0.000000 0.000000 0.219336 -1.424497 2582 203 -8.9802E+00 9.379311 -0.250704 9.201077 13.330114 -99.000000 51.691176 0.000000 0.044508 0.780664 0.607461 6 2.8768E+05 5.843351 6.170145 13.266283 13.172353 -7.023735 49.152015 0.000005 0.000001 0.436433 -0.937E+01 max increase log_rel_run_E_err -7.8720172290523962 rel_E_err 8.0704364173927479D-12 save LOGS/profile17.data for model 3100 save photos/x100 for model 3100 k, q, energy_removed_layers before adjustment is 1332 0.99998956959476404 4.8540206905876504E+047 k, q, energy_removed_layers after adjustment is 1400 0.99997597825785045 5.7171222927713138E+047 Layers above q= 0.99997597825785045 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8321.6152343750000 max vel inside fraction of cutoff 1957.5695220326718 max c/cs inside fraction of cutoff 0.72081635399772259 average v/vesc outside cutoff 1.0845965648174898 Kinetic plus potential energy outside cutoff 5.7171222927713138E+047 mass inside cutoff 1400 51.689934065109554 relax counter 0 log max v [km/s]= 4.3208733450196810 check gamma integral -1.5272983122591550E-002 retry: logT < hydro_mtx_min_allowed_logT 532 3103 retry: logT > hydro_mtx_max_allowed_logT 544 3108 3110 9.376540 2.685E+05 -16.028856 13.199060 51.691176 0.000000 0.000000 0.000000 0.219336 -1.434872 2582 205 -8.7905E+00 9.376531 -0.251336 9.169465 13.308802 -99.000000 51.691176 0.000000 0.044508 0.780664 0.607063 6 2.8768E+05 5.834157 6.167531 13.199020 13.061707 -7.020238 49.152015 0.000005 0.000001 0.436431 -0.948E+01 max increase log_rel_run_E_err -7.8694049322241533 rel_E_err 8.3265912330900407D-12 k, q, energy_removed_layers before adjustment is 1338 0.99998900310551797 5.0346374753304306E+047 k, q, energy_removed_layers after adjustment is 1401 0.99997559892019050 5.8775738391478408E+047 Layers above q= 0.99997559892019050 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8322.0429687500000 max vel inside fraction of cutoff 1984.3497168863273 max c/cs inside fraction of cutoff 0.73356710684505022 average v/vesc outside cutoff 1.0944192775955723 Kinetic plus potential energy outside cutoff 5.8775738391478408E+047 mass inside cutoff 1401 51.689914456699896 relax counter 0 log max v [km/s]= 4.3288123868266384 check gamma integral -1.5086145992963896E-002 retry: logT < hydro_mtx_min_allowed_logT 476 3112 retry: logT < hydro_mtx_min_allowed_logT 436 3117 3120 9.372725 2.682E+05 -16.273027 13.107280 51.691176 0.000000 0.000000 0.000000 0.219336 -1.449154 2582 207 -8.6007E+00 9.372713 -0.252202 9.126008 13.279413 -99.000000 51.691176 0.000000 0.044508 0.780664 0.606515 7 2.8768E+05 5.821525 6.163958 13.107235 12.910101 -7.015484 49.152015 0.000005 0.000001 0.436429 -0.965E+01 max increase log_rel_run_E_err -7.8668202773624527 rel_E_err 8.0370852695554444D-12 k, q, energy_removed_layers before adjustment is 1344 0.99998815301889110 5.2872464356998502E+047 k, q, energy_removed_layers after adjustment is 1403 0.99997510753187324 6.0822102254080460E+047 Layers above q= 0.99997510753187324 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8322.6250000000000 max vel inside fraction of cutoff 2020.0897941147905 max c/cs inside fraction of cutoff 0.75079950270627493 average v/vesc outside cutoff 1.1126791486826952 Kinetic plus potential energy outside cutoff 6.0822102254080460E+047 mass inside cutoff 1403 51.689889056260007 relax counter 0 log max v [km/s]= 4.3395101396192661 check gamma integral -1.4813901405787987E-002 retry: logT > hydro_mtx_max_allowed_logT 417 3122 retry: logRho < hydro_mtx_min_allowed_logRho 3 3129 3130 9.365648 4.195E+05 -16.278595 12.938734 51.691176 0.000000 0.000000 0.000000 0.219336 -1.475745 2585 209 -8.4110E+00 9.365630 -0.253729 9.045252 13.224538 -99.000000 51.691176 0.000000 0.044508 0.780664 0.605493 8 2.8768E+05 5.798080 6.938216 12.938678 12.630451 -7.627943 49.152015 0.000005 0.000001 0.436426 -0.133E+01 max increase log_rel_run_E_err -7.8643295557043640 rel_E_err 7.7758524776827136D-12 k, q, energy_removed_layers before adjustment is 1355 0.99998687083224691 5.6854172304141223E+047 k, q, energy_removed_layers after adjustment is 1412 0.99997327346917886 6.4238105890462533E+047 Layers above q= 0.99997327346917886 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8323.6796875000000 max vel inside fraction of cutoff 2083.2933086372932 max c/cs inside fraction of cutoff 0.78190958968874813 average v/vesc outside cutoff 1.1365619860758998 Kinetic plus potential energy outside cutoff 6.4238105890462533E+047 mass inside cutoff 1412 51.689794251402887 relax counter 0 log max v [km/s]= 4.3532623765665210 check gamma integral -1.4260651250260343E-002 retry: logRho < hydro_mtx_min_allowed_logRho 1 3131 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 6 3140 3140 9.355093 1.756E+06 -16.602513 12.691072 51.691176 0.000000 0.000000 0.000000 0.219336 -1.515607 2585 211 -8.4122E+00 9.355067 -0.223521 8.924394 13.141822 -99.000000 51.691176 0.000000 0.044508 0.780664 0.603962 10 2.8768E+05 5.763091 9.485915 12.690998 12.218607 -7.255901 49.152015 0.000005 0.000001 0.436425 0.263E+01 retry log_rel_run_E_err -7.8619051941089646 rel_E_err 7.8914563777060223D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1365 0.99998490611919677 6.2015931058463024E+047 k, q, energy_removed_layers after adjustment is 1417 0.99997159560790549 6.8590869308054847E+047 Layers above q= 0.99997159560790549 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8325.2089843750000 max vel inside fraction of cutoff 2170.7539990632677 max c/cs inside fraction of cutoff 0.82636919921250840 average v/vesc outside cutoff 1.1616185629044391 Kinetic plus potential energy outside cutoff 6.8590869308054847E+047 mass inside cutoff 1417 51.689707520780871 relax counter 0 log max v [km/s]= 4.3785369938949454 check gamma integral -1.3318190248886282E-002 retry: logT < hydro_mtx_min_allowed_logT 534 3141 retry: logT < hydro_mtx_min_allowed_logT 10 3142 retry: logT > hydro_mtx_max_allowed_logT 146 3150 3150 9.348765 1.618E+06 -17.013838 12.544490 51.691176 0.000000 0.000000 0.000000 0.219336 -1.539580 2618 214 -8.5235E+00 9.348734 -0.205250 8.851663 13.091714 -99.000000 51.691176 0.000000 0.044508 0.780664 0.603049 8 2.8768E+05 5.742119 9.380253 12.544402 11.975099 -3.089303 49.152015 0.000005 0.000000 0.436424 0.162E+03 retry log_rel_run_E_err -7.8595143467694495 rel_E_err 7.7585053384848372D-12 Using fixed_vsurf 20000.000000000000 save photos/x150 for model 3150 k, q, energy_removed_layers before adjustment is 1403 0.99998391939875497 6.4514168485625590E+047 k, q, energy_removed_layers after adjustment is 1453 0.99997079347261608 7.0866567565533326E+047 Layers above q= 0.99997079347261608 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8326.1035156250000 max vel inside fraction of cutoff 2219.8998374907296 max c/cs inside fraction of cutoff 0.85207111734578100 average v/vesc outside cutoff 1.1792879888999097 Kinetic plus potential energy outside cutoff 7.0866567565533326E+047 mass inside cutoff 1453 51.689666057464635 relax counter 0 log max v [km/s]= 4.3463640311535148 check gamma integral -1.2685238350531196E-002 retry: logRho > hydro_mtx_max_allowed_logRho 158 3153 retry: get_T_tau -- L <= 0 3158 3160 9.339892 1.610E+06 -17.295666 12.340888 51.691176 0.000000 0.000000 0.000000 0.219336 -1.573289 2618 216 -8.3337E+00 9.339854 -0.181339 8.749206 13.020768 -99.000000 51.691176 0.000000 0.044508 0.780664 0.601769 8 2.8768E+05 5.712713 9.419289 12.340777 11.638408 -2.487759 49.152015 0.000004 0.000000 0.436424 0.174E+03 max increase log_rel_run_E_err -7.8571941519735260 rel_E_err 7.2150204880004010D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1411 0.99998255938613956 6.7931636514406920E+047 k, q, energy_removed_layers after adjustment is 1457 0.99996936840532002 7.3748898977389884E+047 Layers above q= 0.99996936840532002 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8327.3300781250000 max vel inside fraction of cutoff 2284.9787652969353 max c/cs inside fraction of cutoff 0.88696985206866130 average v/vesc outside cutoff 1.2000972015369842 Kinetic plus potential energy outside cutoff 7.3748898977389884E+047 mass inside cutoff 1457 51.689592394060540 relax counter 0 log max v [km/s]= 4.3525391899322328 check gamma integral -1.1711762244520620E-002 retry: get_T_tau -- L <= 0 3164 3170 9.325840 1.682E+06 -16.311002 12.021943 51.691176 0.000000 0.000000 0.000000 0.219336 -1.626867 2618 217 -8.1527E+00 9.325791 -0.146874 8.585523 12.906687 -99.000000 51.691176 0.000000 0.044508 0.780664 0.599749 9 2.8768E+05 5.666140 9.564111 12.021784 11.114724 -1.959207 49.152015 0.000004 0.000000 0.436424 0.174E+03 lgRho_cntr log_rel_run_E_err -7.8549490753847646 rel_E_err 7.2224898712723742D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1415 0.99998041287156614 7.2436953651120587E+047 k, q, energy_removed_layers after adjustment is 1462 0.99996690068416694 7.7676788030866980E+047 Layers above q= 0.99996690068416694 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8329.2226562500000 max vel inside fraction of cutoff 2380.1779336624531 max c/cs inside fraction of cutoff 0.93988161143240390 average v/vesc outside cutoff 1.2217527210184793 Kinetic plus potential energy outside cutoff 7.7676788030866980E+047 mass inside cutoff 1462 51.689464834652647 relax counter 0 log max v [km/s]= 4.3485042455753184 check gamma integral -9.9654832245336371E-003 3180 9.310496 1.653E+06 -17.995766 11.677278 51.691176 0.000000 0.000000 0.000000 0.219336 -1.685461 2621 217 -8.2049E+00 9.310434 -0.113036 8.404615 12.779637 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597577 6 2.8768E+05 5.615344 9.601919 11.677047 10.549940 -1.769946 49.152015 0.000004 0.000000 0.436424 0.178E+03 lgRho_cntr log_rel_run_E_err -7.8527560672332228 rel_E_err 6.8860037007545261D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1425 0.99997869275944185 7.6384921617634730E+047 k, q, energy_removed_layers after adjustment is 1468 0.99996552683275453 8.1273746164668330E+047 Layers above q= 0.99996552683275453 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8331.2324218750000 max vel inside fraction of cutoff 2475.5185605550505 max c/cs inside fraction of cutoff 0.99508922400869637 average v/vesc outside cutoff 1.2473687360692598 Kinetic plus potential energy outside cutoff 8.1273746164668330E+047 mass inside cutoff 1468 51.689393818657798 relax counter 0 log max v [km/s]= 4.3301036377294571 check gamma integral -7.7785157544423304E-003 3190 9.295293 1.609E+06 -18.025598 11.337802 51.691176 0.000000 0.000000 0.000000 0.219336 -1.743444 2623 217 -8.2132E+00 9.295219 -0.082590 8.222791 12.651043 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595479 6 2.8768E+05 5.565117 9.615420 11.337468 9.989003 -1.695683 49.152015 0.000004 0.000000 0.436424 0.183E+03 lgRho_cntr log_rel_run_E_err -7.8506699746981381 rel_E_err 6.6486094282325220D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1430 0.99997672139852223 8.0046418026982356E+047 k, q, energy_removed_layers after adjustment is 1471 0.99996369908760729 8.4308537409943683E+047 Layers above q= 0.99996369908760729 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8333.1796875000000 max vel inside fraction of cutoff 2563.2688641777154 max c/cs inside fraction of cutoff 1.0478667781505195 average v/vesc outside cutoff 1.2666110211628347 Kinetic plus potential energy outside cutoff 8.4308537409943683E+047 mass inside cutoff 1471 51.689299340362119 relax counter 0 log max v [km/s]= 4.3224677532098923 check gamma integral -5.3362184053248113E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 9.280070 1.551E+06 -18.793017 10.998265 51.691176 0.000000 0.000000 0.000000 0.219336 -1.801262 2617 217 -8.2186E+00 9.279985 -0.054561 8.037821 12.519414 -99.000000 51.691176 0.000000 0.044508 0.780664 0.593452 6 2.8768E+05 5.514968 9.607485 10.997789 9.418739 -1.661610 49.152015 0.000004 0.000000 0.436424 0.188E+03 lgRho_cntr log_rel_run_E_err -7.8486492754147559 rel_E_err 6.3822143613382238D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile18.data for model 3200 save photos/x200 for model 3200 k, q, energy_removed_layers before adjustment is 1427 0.99997510753187246 8.2940327804015486E+047 k, q, energy_removed_layers after adjustment is 1467 0.99996217891150097 8.6969486713069428E+047 Layers above q= 0.99996217891150097 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8335.0976562500000 max vel inside fraction of cutoff 2646.0979193787052 max c/cs inside fraction of cutoff 1.0994031931282005 average v/vesc outside cutoff 1.2856358744950103 Kinetic plus potential energy outside cutoff 8.6969486713069428E+047 mass inside cutoff 1467 51.689220760671788 relax counter 0 log max v [km/s]= 4.3179141163252996 check gamma integral -2.6373570766400401E-003 3210 9.264812 1.492E+06 -18.795921 10.656839 51.691176 0.000000 0.000000 0.000000 0.219336 -1.858797 2622 217 -8.2217E+00 9.264714 -0.028472 7.849143 12.384440 -99.000000 51.691176 0.000000 0.044508 0.780664 0.591512 6 2.8768E+05 5.464891 9.592759 10.656162 8.833364 -1.648722 49.152015 0.000004 0.000000 0.436424 0.193E+03 lgRho_cntr log_rel_run_E_err -7.8466743415363407 rel_E_err 6.4622697660445190D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1436 0.99997372420821351 8.5455768496027876E+047 k, q, energy_removed_layers after adjustment is 1474 0.99996016183398395 8.9345906669138769E+047 Layers above q= 0.99996016183398395 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8336.9941406250000 max vel inside fraction of cutoff 2725.2814826257695 max c/cs inside fraction of cutoff 1.1502280924782515 average v/vesc outside cutoff 1.3009774536762919 Kinetic plus potential energy outside cutoff 8.9345906669138769E+047 mass inside cutoff 1474 51.689116495563297 relax counter 0 log max v [km/s]= 4.3147743535172296 check gamma integral 2.9186451302271559E-004 3220 9.248520 1.444E+06 -19.393763 10.289689 51.691176 0.000000 0.000000 0.000000 0.219336 -1.919577 2624 217 -8.0640E+00 9.248409 -0.002435 7.643578 12.236779 -99.000000 51.691176 0.000000 0.044508 0.780664 0.589563 6 2.8768E+05 5.411675 9.588178 10.288707 8.188696 -1.642072 49.152015 0.000004 0.000000 0.436424 0.197E+03 lgRho_cntr log_rel_run_E_err -7.8447840935388387 rel_E_err 6.0606833933732678D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1436 0.99997221166466999 8.8016217129712139E+047 k, q, energy_removed_layers after adjustment is 1472 0.99995893988921869 9.1609693894965072E+047 Layers above q= 0.99995893988921869 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8339.0078125000000 max vel inside fraction of cutoff 2806.5350217966075 max c/cs inside fraction of cutoff 1.2040018858156147 average v/vesc outside cutoff 1.3201458177819587 Kinetic plus potential energy outside cutoff 9.1609693894965072E+047 mass inside cutoff 1472 51.689053331801645 relax counter 0 log max v [km/s]= 4.3171878811073920 check gamma integral 3.6223117561409329E-003 3230 9.231555 1.392E+06 -19.758620 9.903705 51.691176 0.000000 0.000000 0.000000 0.219336 -1.981918 2613 217 -8.0620E+00 9.231431 0.023040 7.424449 12.078922 -99.000000 51.691176 0.000000 0.044508 0.780664 0.587694 6 2.8768E+05 5.356607 9.575772 9.902262 7.490662 -1.649436 49.152015 0.000004 0.000000 0.436424 0.202E+03 lgRho_cntr log_rel_run_E_err -7.8429651002671719 rel_E_err 5.8158774744560147D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1430 0.99997052170456402 9.0484904359678127E+047 k, q, energy_removed_layers after adjustment is 1463 0.99995715558882081 9.3719896750598208E+047 Layers above q= 0.99995715558882081 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8341.0957031250000 max vel inside fraction of cutoff 2888.2565030071528 max c/cs inside fraction of cutoff 1.2598118287389835 average v/vesc outside cutoff 1.3303907910013921 Kinetic plus potential energy outside cutoff 9.3719896750598208E+047 mass inside cutoff 1463 51.688961099216144 relax counter 0 log max v [km/s]= 4.3144169594861737 check gamma integral 7.2503059202949083E-003 3240 9.214181 1.340E+06 -20.013792 9.504300 51.691176 0.000000 0.000000 0.000000 0.219336 -2.044536 2613 217 -8.1366E+00 9.214044 0.047719 7.193845 11.912626 -99.000000 51.691176 0.000000 0.044508 0.780664 0.585976 6 2.8768E+05 5.300629 9.558551 9.502170 6.736052 -1.664143 49.152015 0.000004 0.000000 0.436424 0.207E+03 lgRho_cntr log_rel_run_E_err -7.8412195572641661 rel_E_err 5.6760581378938394D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1432 0.99996897545522390 9.2606808227777452E+047 k, q, energy_removed_layers after adjustment is 1463 0.99995607325979452 9.5677693759984747E+047 Layers above q= 0.99995607325979452 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8343.2402343750000 max vel inside fraction of cutoff 2969.4422001172252 max c/cs inside fraction of cutoff 1.3170981162066053 average v/vesc outside cutoff 1.3491104826107787 Kinetic plus potential energy outside cutoff 9.5677693759984747E+047 mass inside cutoff 1463 51.688905152356192 relax counter 0 log max v [km/s]= 4.3104745341624859 check gamma integral 1.1056867310110598E-002 3250 9.196851 1.291E+06 -20.232319 9.102595 51.691176 0.000000 0.000000 0.000000 0.219336 -2.105544 2623 217 -8.1688E+00 9.196701 0.071182 6.956644 11.741787 -99.000000 51.691176 0.000000 0.044508 0.780664 0.584483 6 2.8768E+05 5.245277 9.540689 9.099480 5.900527 -1.684959 49.152015 0.000004 0.000000 0.436424 0.212E+03 lgRho_cntr log_rel_run_E_err -7.8395362180470594 rel_E_err 5.5726388574539431D-12 Using fixed_vsurf 20000.000000000000 save photos/x250 for model 3250 k, q, energy_removed_layers before adjustment is 1441 0.99996764624937695 9.4520258309396364E+047 k, q, energy_removed_layers after adjustment is 1472 0.99995445170771158 9.7462208700580019E+047 Layers above q= 0.99995445170771158 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8345.3964843750000 max vel inside fraction of cutoff 3048.2665606521964 max c/cs inside fraction of cutoff 1.3746399977073309 average v/vesc outside cutoff 1.3602577177246469 Kinetic plus potential energy outside cutoff 9.7462208700580019E+047 mass inside cutoff 1472 51.688821332422449 relax counter 0 log max v [km/s]= 4.3085245873407150 check gamma integral 1.4858106715539162E-002 3260 9.179463 1.244E+06 -20.371778 8.678624 51.691176 0.000000 0.000000 0.000000 0.219336 -2.165136 2632 217 -8.1783E+00 9.179301 0.093792 6.710279 11.565063 -99.000000 51.691176 0.000000 0.044508 0.780664 0.583227 6 2.8768E+05 5.190274 9.521980 8.673927 5.192707 -1.708850 49.152015 0.000004 0.000000 0.436424 0.217E+03 lgRho_cntr log_rel_run_E_err -7.8379145325307205 rel_E_err 5.0782044889426035D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1449 0.99996639508256724 9.6301874832290820E+047 k, q, energy_removed_layers after adjustment is 1480 0.99995335833688659 9.9111767030780979E+047 Layers above q= 0.99995335833688659 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8347.5859375000000 max vel inside fraction of cutoff 3125.4788390505587 max c/cs inside fraction of cutoff 1.4330392443778575 average v/vesc outside cutoff 1.3739215806334824 Kinetic plus potential energy outside cutoff 9.9111767030780979E+047 mass inside cutoff 1480 51.688764814798944 relax counter 0 log max v [km/s]= 4.3073688622108390 check gamma integral 1.8587461296985127E-002 3270 9.161934 1.201E+06 -20.535206 8.249009 51.691176 0.000000 0.000000 0.000000 0.219336 -2.223461 2635 217 -8.1798E+00 9.161762 0.115840 6.452041 11.381163 -99.000000 51.691176 0.000000 0.044508 0.780664 0.582217 6 2.8768E+05 5.135398 9.504472 8.242022 4.374584 -1.736139 49.152015 0.000004 0.000000 0.436424 0.222E+03 lgRho_cntr log_rel_run_E_err -7.8363424819100862 rel_E_err 5.1396026496997015D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1451 0.99996516755652387 9.7997508354787739E+047 k, q, energy_removed_layers after adjustment is 1484 0.99995205464953607 1.0065647962656346E+048 Layers above q= 0.99995205464953607 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8349.8378906250000 max vel inside fraction of cutoff 3201.6748932998153 max c/cs inside fraction of cutoff 1.4928676240706664 average v/vesc outside cutoff 1.3871390938320729 Kinetic plus potential energy outside cutoff 1.0065647962656346E+048 mass inside cutoff 1484 51.688697425666952 relax counter 0 log max v [km/s]= 4.3065594732543238 check gamma integral 2.2177441495854586E-002 3280 9.143966 1.160E+06 -20.765338 7.818689 51.691176 0.000000 0.000000 0.000000 0.219336 -2.281378 2640 217 -8.0889E+00 9.143783 0.137850 6.175339 11.186280 -99.000000 51.691176 0.000000 0.044508 0.780664 0.581456 6 2.8768E+05 5.079759 9.488812 7.808703 3.487068 -1.763804 49.152015 0.000004 0.000000 0.436424 0.227E+03 max increase log_rel_run_E_err -7.8348334868181242 rel_E_err 4.9459215603607103D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1460 0.99996369908760774 9.9682149309549323E+047 k, q, energy_removed_layers after adjustment is 1492 0.99995072181400435 1.0214911763125297E+048 Layers above q= 0.99995072181400435 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8352.2011718750000 max vel inside fraction of cutoff 3278.3116382008634 max c/cs inside fraction of cutoff 1.5555175288579643 average v/vesc outside cutoff 1.4000954651474424 Kinetic plus potential energy outside cutoff 1.0214911763125297E+048 mass inside cutoff 1492 51.688628529831192 relax counter 0 log max v [km/s]= 4.3070415900136974 check gamma integral 2.5606296444607917E-002 3290 9.125142 1.120E+06 -20.923135 7.375131 51.691176 0.000000 0.000000 0.000000 0.219336 -2.340045 2636 217 -8.0716E+00 9.124950 0.160447 5.870277 10.974765 -99.000000 51.691176 0.000000 0.044508 0.780664 0.580955 6 2.8768E+05 5.022136 9.472523 7.361333 2.518442 -1.793072 49.152015 0.000004 0.000000 0.436424 0.232E+03 lgRho_cntr log_rel_run_E_err -7.8333969030636599 rel_E_err 4.8174999313613222D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1458 0.99996217891150163 1.0134909790243849E+048 k, q, energy_removed_layers after adjustment is 1489 0.99994932951479343 1.0363000255115346E+048 Layers above q= 0.99994932951479343 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8354.7500000000000 max vel inside fraction of cutoff 3357.1939788216100 max c/cs inside fraction of cutoff 1.6229701741064431 average v/vesc outside cutoff 1.4137660136182901 Kinetic plus potential energy outside cutoff 1.0363000255115346E+048 mass inside cutoff 1489 51.688556560247953 relax counter 0 log max v [km/s]= 4.3063911636556096 check gamma integral 2.8865215832220317E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 9.106882 1.078E+06 -21.066534 6.958458 51.691176 0.000000 0.000000 0.000000 0.219336 -2.395070 2633 217 -8.1182E+00 9.106682 0.182070 5.557279 10.761986 -99.000000 51.691176 0.000000 0.044508 0.780664 0.580752 6 2.8768E+05 4.966877 9.449144 6.940863 1.539230 -1.826209 49.152015 0.000004 0.000000 0.436424 0.238E+03 lgRho_cntr log_rel_run_E_err -7.8320071547094905 rel_E_err 4.6540894842645587D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile19.data for model 3300 save photos/x300 for model 3300 k, q, energy_removed_layers before adjustment is 1457 0.99996078443713865 1.0282753662412940E+048 k, q, energy_removed_layers after adjustment is 1487 0.99994784687467131 1.0500358218655608E+048 Layers above q= 0.99994784687467131 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.3203125000000 max vel inside fraction of cutoff 3430.7938574317755 max c/cs inside fraction of cutoff 1.6882407077846830 average v/vesc outside cutoff 1.4272102832871911 Kinetic plus potential energy outside cutoff 1.0500358218655608E+048 mass inside cutoff 1487 51.688479920836784 relax counter 0 log max v [km/s]= 4.3054313789535748 check gamma integral 3.1666401657269798E-002 3310 9.087631 1.042E+06 -21.222991 6.537251 51.691176 0.000000 0.000000 0.000000 0.219336 -2.451261 2631 217 -7.9458E+00 9.087421 0.204701 5.206212 10.529144 -99.000000 51.691176 0.000000 0.044508 0.780664 0.580821 6 2.8768E+05 4.909249 9.435427 6.516497 0.462803 -1.859776 49.152015 0.000004 0.000000 0.436424 0.243E+03 lgRho_cntr log_rel_run_E_err -7.8306794600418037 rel_E_err 4.1943105302970280D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1458 0.99995955444549323 1.0426360605234651E+048 k, q, energy_removed_layers after adjustment is 1487 0.99994593709628043 1.0639615407662733E+048 Layers above q= 0.99994593709628043 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.1484375000000 max vel inside fraction of cutoff 3508.4275619181490 max c/cs inside fraction of cutoff 1.7619624116857246 average v/vesc outside cutoff 1.4356269897193001 Kinetic plus potential energy outside cutoff 1.0639615407662733E+048 mass inside cutoff 1487 51.688381202146282 relax counter 0 log max v [km/s]= 4.3065107937080871 check gamma integral 3.4226575696551492E-002 3320 9.068737 1.002E+06 -21.371697 6.140235 51.691176 0.000000 0.000000 0.000000 0.219336 -2.504785 2632 217 -8.0581E+00 9.068520 0.226856 4.838031 10.291852 -99.000000 51.691176 0.000000 0.044508 0.780664 0.581150 6 2.8768E+05 4.853281 9.411068 6.118020 -0.639212 -1.899128 49.152015 0.000004 0.000000 0.436424 0.249E+03 lgRho_cntr log_rel_run_E_err -7.8294194035657840 rel_E_err 4.3491404064709956D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1462 0.99995800477834862 1.0573147740965173E+048 k, q, energy_removed_layers after adjustment is 1488 0.99994470993314588 1.0771016827627578E+048 Layers above q= 0.99994470993314588 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8363.0625000000000 max vel inside fraction of cutoff 3582.7070071103544 max c/cs inside fraction of cutoff 1.8370809619949067 average v/vesc outside cutoff 1.4490262352378467 Kinetic plus potential energy outside cutoff 1.0771016827627578E+048 mass inside cutoff 1488 51.688317768640985 relax counter 0 log max v [km/s]= 4.3051344866958496 check gamma integral 3.6362062701214705E-002 3330 9.049844 9.635E+05 -21.521980 5.753123 51.691176 0.000000 0.000000 0.000000 0.219336 -2.556948 2637 217 -7.9692E+00 9.049622 0.249044 4.443720 10.045657 -99.000000 51.691176 0.000000 0.044508 0.780664 0.581708 6 2.8768E+05 4.797839 9.388203 5.731282 -1.787992 -1.937987 49.152015 0.000004 0.000000 0.436424 0.255E+03 max increase log_rel_run_E_err -7.8282242682855099 rel_E_err 4.0473451468625893D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1469 0.99995661745734088 1.0716144042203157E+048 k, q, energy_removed_layers after adjustment is 1495 0.99994294492424973 1.0898582278919300E+048 Layers above q= 0.99994294492424973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8366.1367187500000 max vel inside fraction of cutoff 3654.5705123413982 max c/cs inside fraction of cutoff 1.9150625820873104 average v/vesc outside cutoff 1.4604581636062235 Kinetic plus potential energy outside cutoff 1.0898582278919300E+048 mass inside cutoff 1495 51.688226533255886 relax counter 0 log max v [km/s]= 4.3053430346040438 check gamma integral 3.8158161358777636E-002 3340 9.029985 9.246E+05 -21.681234 5.349926 51.691176 0.000000 0.000000 0.000000 0.219336 -2.610607 2641 217 -7.9827E+00 9.029758 0.272475 3.998131 9.777034 -99.000000 51.691176 0.000000 0.044508 0.780664 0.582509 6 2.8768E+05 4.740040 9.363507 5.330164 -3.047976 -1.980850 49.152015 0.000004 0.000000 0.436424 0.261E+03 lgRho_cntr log_rel_run_E_err -7.8270699436584037 rel_E_err 3.8603189649310665D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1476 0.99995499014924760 1.0858453766686895E+048 k, q, energy_removed_layers after adjustment is 1501 0.99994152501533062 1.1029623080970195E+048 Layers above q= 0.99994152501533062 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8369.5605468750000 max vel inside fraction of cutoff 3726.8013666963107 max c/cs inside fraction of cutoff 2.0001759371644212 average v/vesc outside cutoff 1.4752032171503844 Kinetic plus potential energy outside cutoff 1.1029623080970195E+048 mass inside cutoff 1501 51.688153136494364 relax counter 0 log max v [km/s]= 4.3048714599025359 check gamma integral 3.9730795606968010E-002 3350 9.011087 8.850E+05 -21.835100 4.968543 51.691176 0.000000 0.000000 0.000000 0.219336 -2.660783 2644 217 -7.9883E+00 9.010857 0.294904 3.542378 9.511925 -99.000000 51.691176 0.000000 0.044508 0.780664 0.583449 5 2.8768E+05 4.685440 9.332191 4.951952 -4.298612 -2.025389 49.152015 0.000004 0.000000 0.436424 0.268E+03 lgRho_cntr log_rel_run_E_err -7.8259602522598675 rel_E_err 3.7348763894284818D-12 Using fixed_vsurf 20000.000000000000 save photos/x350 for model 3350 k, q, energy_removed_layers before adjustment is 1482 0.99995335833688659 1.0988154660415329E+048 k, q, energy_removed_layers after adjustment is 1506 0.99994007560989628 1.1151214713848251E+048 Layers above q= 0.99994007560989628 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8373.0136718750000 max vel inside fraction of cutoff 3791.6801865793127 max c/cs inside fraction of cutoff 2.0840388311061870 average v/vesc outside cutoff 1.4855364510875060 Kinetic plus potential energy outside cutoff 1.1151214713848251E+048 mass inside cutoff 1506 51.688078215023289 relax counter 0 log max v [km/s]= 4.3046385038083805 check gamma integral 4.0979641533034419E-002 3360 8.990780 8.470E+05 -22.004309 4.571924 51.691176 0.000000 0.000000 0.000000 0.219336 -2.714025 2638 217 -7.8855E+00 8.990548 0.319184 3.015370 9.216475 -99.000000 51.691176 0.000000 0.044508 0.780664 0.584616 5 2.8768E+05 4.627115 9.304637 4.559697 -5.700925 -2.072906 49.152015 0.000004 0.000000 0.436424 0.275E+03 lgRho_cntr log_rel_run_E_err -7.8249167995876956 rel_E_err 3.6005113031318366D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1478 0.99995205464953585 1.1114250571273845E+048 k, q, energy_removed_layers after adjustment is 1503 0.99993793270156262 1.1278894061861080E+048 Layers above q= 0.99993793270156262 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8376.9589843750000 max vel inside fraction of cutoff 3856.4155524290536 max c/cs inside fraction of cutoff 2.1772543290196711 average v/vesc outside cutoff 1.4950212613805203 Kinetic plus potential energy outside cutoff 1.1278894061861080E+048 mass inside cutoff 1503 51.687967445571935 relax counter 0 log max v [km/s]= 4.3045968891848965 check gamma integral 4.2109947630731552E-002 3370 8.971534 8.102E+05 -22.169465 4.235196 51.691176 0.000000 0.000000 0.000000 0.219336 -2.764018 2632 217 -7.9250E+00 8.971301 0.342370 2.478517 8.926410 -99.000000 51.691176 0.000000 0.044508 0.780664 0.585852 5 2.8768E+05 4.572123 9.273726 4.227523 -7.087952 -2.128032 49.152015 0.000004 0.000000 0.436424 0.282E+03 lgRho_cntr log_rel_run_E_err -7.8239289540082142 rel_E_err 3.3387817492682459D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1475 0.99995027056545460 1.1243598977330267E+048 k, q, energy_removed_layers after adjustment is 1500 0.99993572762530525 1.1397887222935860E+048 Layers above q= 0.99993572762530525 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8380.9355468750000 max vel inside fraction of cutoff 3912.4314841438786 max c/cs inside fraction of cutoff 2.2683874320028874 average v/vesc outside cutoff 1.5029812983840141 Kinetic plus potential energy outside cutoff 1.1397887222935860E+048 mass inside cutoff 1500 51.687853462587519 relax counter 0 log max v [km/s]= 4.3043315697162816 check gamma integral 4.3027226073376806E-002 3380 8.951362 7.715E+05 -22.349367 3.956976 51.691176 0.000000 0.000000 0.000000 0.219336 -2.816136 2627 217 -7.7483E+00 8.951128 0.366873 1.874241 8.611883 -99.000000 51.691176 0.000000 0.044508 0.780664 0.587253 5 2.8768E+05 4.514717 9.237809 3.953371 -8.604976 -2.181301 49.152015 0.000004 0.000000 0.436424 0.289E+03 lgRho_cntr log_rel_run_E_err -7.8229803668094551 rel_E_err 3.1536812544591944D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1473 0.99994834502499619 1.1376802153349357E+048 k, q, energy_removed_layers after adjustment is 1497 0.99993405874787666 1.1522021620514761E+048 Layers above q= 0.99993405874787666 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8385.3730468750000 max vel inside fraction of cutoff 3965.0184195338870 max c/cs inside fraction of cutoff 2.3668217423401066 average v/vesc outside cutoff 1.5179030470216508 Kinetic plus potential energy outside cutoff 1.1522021620514761E+048 mass inside cutoff 1497 51.687767196351011 relax counter 0 log max v [km/s]= 4.3046571206807176 check gamma integral 4.3871264903659397E-002 3390 8.931677 7.314E+05 -22.532870 3.773034 51.691176 0.000000 0.000000 0.000000 0.219336 -2.866841 2616 217 -7.8564E+00 8.931442 0.390996 1.241429 8.294709 -99.000000 51.691176 0.000000 0.044508 0.780664 0.588711 5 2.8768E+05 4.458890 9.193198 3.771756 -10.150539 -2.241217 49.152015 0.000004 0.000000 0.436424 0.298E+03 lgRho_cntr log_rel_run_E_err -7.8220970534160088 rel_E_err 2.9890503441938931D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1464 0.99994657984815782 1.1502841273488767E+048 k, q, energy_removed_layers after adjustment is 1489 0.99993161968362276 1.1641363382840890E+048 Layers above q= 0.99993161968362276 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8389.9960937500000 max vel inside fraction of cutoff 4009.9376368928456 max c/cs inside fraction of cutoff 2.4656368617086124 average v/vesc outside cutoff 1.5265584555271814 Kinetic plus potential energy outside cutoff 1.1641363382840890E+048 mass inside cutoff 1489 51.687641118251925 relax counter 0 log max v [km/s]= 4.3038409960320205 check gamma integral 4.4612375123473727E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 8.912108 6.949E+05 -22.724011 3.655744 51.691176 0.000000 0.000000 0.000000 0.219336 -2.917199 2616 217 -7.7651E+00 8.911872 0.415207 0.567562 7.969805 -99.000000 51.691176 0.000000 0.044508 0.780664 0.590234 5 2.8768E+05 4.403547 9.152891 3.655390 -11.753656 -2.304356 49.152015 0.000004 0.000000 0.436424 0.307E+03 max increase log_rel_run_E_err -7.8212599669360285 rel_E_err 2.8497788390912824D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile20.data for model 3400 save photos/x400 for model 3400 k, q, energy_removed_layers before adjustment is 1464 0.99994470993314544 1.1622826847229055E+048 k, q, energy_removed_layers after adjustment is 1489 0.99992923553716573 1.1761067361578708E+048 Layers above q= 0.99992923553716573 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8394.8984375000000 max vel inside fraction of cutoff 4048.0752982562767 max c/cs inside fraction of cutoff 2.5665702525490666 average v/vesc outside cutoff 1.5388618977653907 Kinetic plus potential energy outside cutoff 1.1761067361578708E+048 mass inside cutoff 1489 51.687517878918335 relax counter 0 log max v [km/s]= 4.3039603878688997 check gamma integral 4.5293051521428852E-002 3410 8.891663 6.575E+05 -22.932254 3.570615 51.691176 0.000000 0.000000 0.000000 0.219336 -2.969851 2607 217 -7.7761E+00 8.891428 0.440788 -0.187249 7.621216 -99.000000 51.691176 0.000000 0.044508 0.780664 0.591888 5 2.8768E+05 4.345860 9.107748 3.570540 -13.502632 -2.374371 49.152015 0.000004 0.000000 0.436424 0.316E+03 lgRho_cntr log_rel_run_E_err -7.8204576333058133 rel_E_err 2.8146125456822445D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1458 0.99994223864207255 1.1758672635422069E+048 k, q, energy_removed_layers after adjustment is 1482 0.99992650319522058 1.1887822664971126E+048 Layers above q= 0.99992650319522058 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8400.3906250000000 max vel inside fraction of cutoff 4080.8282756863882 max c/cs inside fraction of cutoff 2.6749954855156193 average v/vesc outside cutoff 1.5479841945242467 Kinetic plus potential energy outside cutoff 1.1887822664971126E+048 mass inside cutoff 1482 51.687376640950561 relax counter 0 log max v [km/s]= 4.3035994206495722 check gamma integral 4.5963676158779901E-002 3420 8.872308 6.242E+05 -23.135597 3.505722 51.691176 0.000000 0.000000 0.000000 0.219336 -3.019753 2598 217 -7.7787E+00 8.872076 0.465313 -0.952523 7.284606 -99.000000 51.691176 0.000000 0.044508 0.780664 0.593510 5 2.8768E+05 4.291371 9.066506 3.505707 -15.232381 -2.449385 49.152015 0.000004 0.000000 0.436424 0.326E+03 lgRho_cntr log_rel_run_E_err -7.8196971935710353 rel_E_err 2.4918269609422547D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1448 0.99994007560989639 1.1876359181483436E+048 k, q, energy_removed_layers after adjustment is 1474 0.99992238858147442 1.2011717844166067E+048 Layers above q= 0.99992238858147442 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8405.9687500000000 max vel inside fraction of cutoff 4105.1929749888886 max c/cs inside fraction of cutoff 2.7804572867116817 average v/vesc outside cutoff 1.5405037318269945 Kinetic plus potential energy outside cutoff 1.2011717844166067E+048 mass inside cutoff 1474 51.687163951728159 relax counter 0 log max v [km/s]= 4.3034260483115636 check gamma integral 4.6573053825812026E-002 3430 8.851611 5.889E+05 -23.356493 3.441408 51.691176 0.000000 0.000000 0.000000 0.219336 -3.073247 2596 217 -7.6733E+00 8.851382 0.491885 -1.828327 6.922550 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595295 5 2.8768E+05 4.233199 9.018650 3.441406 -17.162996 -2.526623 49.152015 0.000004 0.000000 0.436424 0.336E+03 lgRho_cntr log_rel_run_E_err -7.8189776142985172 rel_E_err 2.4444144349951277D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1687 0.99926842251865877 2.9189541723133885E+048 k, q, energy_removed_layers after adjustment is 1815 0.99639505664578554 6.3761633397725063E+048 Layers above q= 0.99639505664578554 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8412.3789062500000 max vel inside fraction of cutoff 3963.8792445156269 max c/cs inside fraction of cutoff 2.7068129710800055 average v/vesc outside cutoff 0.96408117967667339 Kinetic plus potential energy outside cutoff 6.3761633397725063E+048 mass inside cutoff 1815 51.504832016615914 relax counter 0 log max v [km/s]= 4.3034073847799892 check gamma integral 4.7205585804952557E-002 3440 8.832081 5.568E+05 -23.565564 3.386854 51.691176 0.000000 0.000000 0.000000 0.219336 -3.123828 2597 217 -7.7073E+00 8.831857 0.517382 -2.714454 6.585285 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597027 5 2.8768E+05 4.178411 8.972135 3.386854 -19.067503 -2.607373 49.152015 0.000004 0.000000 0.436424 0.348E+03 lgRho_cntr log_rel_run_E_err -7.8183071825556851 rel_E_err 2.2876577210722539D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1741 0.99859918254002256 5.9801175162711677E+048 k, q, energy_removed_layers after adjustment is 1839 0.99519610667312941 1.0173007485439083E+049 Layers above q= 0.99519610667312941 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8418.9082031250000 max vel inside fraction of cutoff 3916.6507304991819 max c/cs inside fraction of cutoff 2.7494634284994222 average v/vesc outside cutoff 0.98408363058222748 Kinetic plus potential energy outside cutoff 1.0173007485439083E+049 mass inside cutoff 1839 51.442856882831265 relax counter 0 log max v [km/s]= 4.3031020731013827 check gamma integral 4.7791241342953206E-002 3450 8.811683 5.275E+05 -23.782495 3.332041 51.691176 0.000000 0.000000 0.000000 0.219336 -3.176805 2595 217 -7.5260E+00 8.811464 0.544504 -3.706970 6.248758 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598879 5 2.8768E+05 4.121267 8.932452 3.332041 -21.145620 -2.693989 49.152015 0.000004 0.000000 0.436424 0.359E+03 lgRho_cntr log_rel_run_E_err -7.8176683531301414 rel_E_err 2.1051833427629318D-12 Using fixed_vsurf 20000.000000000000 save photos/x450 for model 3450 k, q, energy_removed_layers before adjustment is 1769 0.99780408294151002 1.0092207782478968E+049 k, q, energy_removed_layers after adjustment is 1858 0.99379599036261634 1.4841580755931020E+049 Layers above q= 0.99379599036261634 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8426.2851562500000 max vel inside fraction of cutoff 3861.0290499939342 max c/cs inside fraction of cutoff 2.7968055067988464 average v/vesc outside cutoff 0.99218934439781048 Kinetic plus potential energy outside cutoff 1.4841580755931020E+049 mass inside cutoff 1858 51.370483224516001 relax counter 0 log max v [km/s]= 4.3034621423047046 check gamma integral 4.8394886923279715E-002 3460 8.791826 4.995E+05 -23.991660 3.278872 51.691176 0.000000 0.000000 0.000000 0.219336 -3.228505 2590 217 -7.6262E+00 8.791610 0.571428 -4.742517 5.949207 -99.000000 51.691176 0.000000 0.044508 0.780664 0.600728 5 2.8768E+05 4.065721 8.891839 3.278872 -23.259723 -2.787236 49.152015 0.000004 0.000000 0.436424 0.371E+03 lgRho_cntr log_rel_run_E_err -7.8170658097436023 rel_E_err 2.0394013014212739D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1787 0.99696161541174633 1.4677099339135373E+049 k, q, energy_removed_layers after adjustment is 1868 0.99257023403341149 1.9916943069139555E+049 Layers above q= 0.99257023403341149 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8434.0781250000000 max vel inside fraction of cutoff 3793.5047639101281 max c/cs inside fraction of cutoff 2.8323411503809681 average v/vesc outside cutoff 1.0166671281003710 Kinetic plus potential energy outside cutoff 1.9916943069139555E+049 mass inside cutoff 1868 51.307122438643056 relax counter 0 log max v [km/s]= 4.3029409852417508 check gamma integral 4.8976559785826886E-002 3470 8.772128 4.736E+05 -24.198203 3.226181 51.691176 0.000000 0.000000 0.000000 0.219336 -3.279908 2595 217 -7.5277E+00 8.771917 0.598724 -5.843923 5.688432 -99.000000 51.691176 0.000000 0.044508 0.780664 0.602603 5 2.8768E+05 4.010703 8.853757 3.226181 -25.449972 -2.881734 49.152015 0.000004 0.000000 0.436424 0.383E+03 max increase log_rel_run_E_err -7.8164863907981834 rel_E_err 2.0796393870738831D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1813 0.99600608771709731 1.9890081040084471E+049 k, q, energy_removed_layers after adjustment is 1890 0.99114757558785249 2.5316310127438897E+049 Layers above q= 0.99114757558785249 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8442.4921875000000 max vel inside fraction of cutoff 3721.4742822920530 max c/cs inside fraction of cutoff 2.8674826450927342 average v/vesc outside cutoff 1.0223337235215870 Kinetic plus potential energy outside cutoff 2.5316310127438897E+049 mass inside cutoff 1890 51.233583550862740 relax counter 0 log max v [km/s]= 4.3030589218176880 check gamma integral 4.9549486992370814E-002 3480 8.751597 4.477E+05 -24.414240 3.171267 51.691176 0.000000 0.000000 0.000000 0.219336 -3.333616 2591 217 -7.5290E+00 8.751392 0.627904 -7.079051 5.456085 -99.000000 51.691176 0.000000 0.044508 0.780664 0.604599 5 2.8768E+05 3.953436 8.814537 3.171267 -27.836467 -2.985299 49.152015 0.000004 0.000000 0.436424 0.395E+03 lgRho_cntr log_rel_run_E_err -7.8159459892911549 rel_E_err 1.8355825992380912D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1825 0.99499850816309143 2.5571908071175049E+049 k, q, energy_removed_layers after adjustment is 1898 0.98983337540828842 3.1187052500393018E+049 Layers above q= 0.98983337540828842 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8452.0859375000000 max vel inside fraction of cutoff 3640.2271834018652 max c/cs inside fraction of cutoff 2.9030400388896354 average v/vesc outside cutoff 1.0411271631463708 Kinetic plus potential energy outside cutoff 3.1187052500393018E+049 mass inside cutoff 1898 51.165650998374453 relax counter 0 log max v [km/s]= 4.3028096826464513 check gamma integral 5.0143728348035863E-002 3490 8.730997 4.232E+05 -24.633458 3.116170 51.691176 0.000000 0.000000 0.000000 0.219336 -3.387619 2586 217 -7.3654E+00 8.730799 0.658026 -8.416536 5.255517 -99.000000 51.691176 0.000000 0.044508 0.780664 0.606646 5 2.8768E+05 3.896062 8.776962 3.116170 -30.342118 -3.094061 49.152015 0.000004 0.000000 0.436424 0.406E+03 lgRho_cntr log_rel_run_E_err -7.8154135413658645 rel_E_err 1.9071369637213856D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1839 0.99388458251940581 3.1778922781842018E+049 k, q, energy_removed_layers after adjustment is 1903 0.98859009548015697 3.7191688749577116E+049 Layers above q= 0.98859009548015697 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8462.6953125000000 max vel inside fraction of cutoff 3558.2595708067083 max c/cs inside fraction of cutoff 2.9441187496988261 average v/vesc outside cutoff 1.0632920872800145 Kinetic plus potential energy outside cutoff 3.7191688749577116E+049 mass inside cutoff 1903 51.101384397069147 relax counter 0 log max v [km/s]= 4.3031239624488151 check gamma integral 5.0737715664991856E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 8.711034 3.997E+05 -24.849512 3.062781 51.691176 0.000000 0.000000 0.000000 0.219336 -3.440040 2585 217 -7.4696E+00 8.710844 0.688140 -9.817046 5.081453 -99.000000 51.691176 0.000000 0.044508 0.780664 0.608676 5 2.8768E+05 3.840547 8.738123 3.062781 -32.881646 -3.210141 49.152015 0.000004 0.000000 0.436424 0.417E+03 lgRho_cntr log_rel_run_E_err -7.8149224272161639 rel_E_err 1.6499591211754007D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile21.data for model 3500 save photos/x500 for model 3500 k, q, energy_removed_layers before adjustment is 1853 0.99280050258231445 3.7687182430587050E+049 k, q, energy_removed_layers after adjustment is 1910 0.98738671599705663 4.3012268794081228E+049 Layers above q= 0.98738671599705663 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8474.0605468750000 max vel inside fraction of cutoff 3470.3994539436253 max c/cs inside fraction of cutoff 2.9771847019165412 average v/vesc outside cutoff 1.0833579003358655 Kinetic plus potential energy outside cutoff 4.3012268794081228E+049 mass inside cutoff 1910 51.039180296681522 relax counter 0 log max v [km/s]= 4.3025693734647215 check gamma integral 5.1311792130288594E-002 3510 8.690062 3.759E+05 -25.081363 3.006690 51.691176 0.000000 0.000000 0.000000 0.219336 -3.495215 2575 217 -7.3917E+00 8.689881 0.720930 -11.413022 4.910460 -99.000000 51.691176 0.000000 0.044508 0.780664 0.610851 5 2.8768E+05 3.782309 8.697056 3.006690 -35.673420 -3.335550 49.152015 0.000004 0.000000 0.436424 0.427E+03 lgRho_cntr log_rel_run_E_err -7.8144590744204958 rel_E_err 1.6132190994502647D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1860 0.99161177348641438 4.3997317799770074E+049 k, q, energy_removed_layers after adjustment is 1911 0.98605168406647714 4.9033531090929390E+049 Layers above q= 0.98605168406647714 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8487.3652343750000 max vel inside fraction of cutoff 3370.3025382670648 max c/cs inside fraction of cutoff 3.0172800079953648 average v/vesc outside cutoff 1.0990379712698815 Kinetic plus potential energy outside cutoff 4.9033531090929390E+049 mass inside cutoff 1911 50.970170926489750 relax counter 0 log max v [km/s]= 4.3025441095387000 check gamma integral 5.1913988618714414E-002 3520 8.669503 3.530E+05 -25.314154 2.951710 51.691176 0.000000 0.000000 0.000000 0.219336 -3.549376 2575 217 -7.2221E+00 8.669334 0.754414 -13.112480 4.748575 -99.000000 51.691176 0.000000 0.044508 0.780664 0.613031 6 2.8768E+05 3.725308 8.654553 2.951710 -38.539372 -3.466082 49.152015 0.000004 0.000000 0.436424 0.435E+03 lgRho_cntr log_rel_run_E_err -7.8140259689175187 rel_E_err 1.4024021768314060D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1869 0.99037167230519640 5.0351209497986125E+049 k, q, energy_removed_layers after adjustment is 1914 0.98496999688127085 5.4770181987687264E+049 Layers above q= 0.98496999688127085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8502.0292968750000 max vel inside fraction of cutoff 3278.3840705148705 max c/cs inside fraction of cutoff 3.0647198213542635 average v/vesc outside cutoff 1.1228193695983473 Kinetic plus potential energy outside cutoff 5.4770181987687264E+049 mass inside cutoff 1914 50.914257244063300 relax counter 0 log max v [km/s]= 4.3028286657816954 check gamma integral 5.2503985368439421E-002 3530 8.649610 3.306E+05 -25.545283 2.898517 51.691176 0.000000 0.000000 0.000000 0.219336 -3.601838 2575 217 -7.3139E+00 8.649454 0.788342 -14.875384 4.594192 -99.000000 51.691176 0.000000 0.044508 0.780664 0.615186 5 2.8768E+05 3.670240 8.608495 2.898517 -41.440529 -3.604098 49.152015 0.000004 0.000000 0.436424 0.443E+03 lgRho_cntr log_rel_run_E_err -7.8136100902833805 rel_E_err 1.3446683538362737D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1872 0.98930788755836929 5.5885283759775758E+049 k, q, energy_removed_layers after adjustment is 1914 0.98384484329265109 6.0117778099124721E+049 Layers above q= 0.98384484329265109 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8518.0859375000000 max vel inside fraction of cutoff 3175.1539981279998 max c/cs inside fraction of cutoff 3.0918467993870062 average v/vesc outside cutoff 1.1394191485104568 Kinetic plus potential energy outside cutoff 6.0117778099124721E+049 mass inside cutoff 1914 50.856096732137608 relax counter 0 log max v [km/s]= 4.3022723700917833 check gamma integral 5.3075438692745447E-002 3540 8.628765 3.071E+05 -25.794306 2.842781 51.691176 0.000000 0.000000 0.000000 0.219336 -3.656880 2573 217 -7.2237E+00 8.628623 0.825885 -16.736637 4.433321 -99.000000 51.691176 0.000000 0.044508 0.780664 0.617490 5 2.8768E+05 3.612617 8.555746 2.842781 -44.622134 -3.753170 49.152015 0.000004 0.000000 0.436424 0.454E+03 lgRho_cntr log_rel_run_E_err -7.8132234119255495 rel_E_err 1.3964534321084533D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1878 0.98804037676747947 6.1912084023865959E+049 k, q, energy_removed_layers after adjustment is 1916 0.98281925285063920 6.5465041949632903E+049 Layers above q= 0.98281925285063920 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8537.3769531250000 max vel inside fraction of cutoff 3069.0822040107078 max c/cs inside fraction of cutoff 3.1352048823984364 average v/vesc outside cutoff 1.1675636325808185 Kinetic plus potential energy outside cutoff 6.5465041949632903E+049 mass inside cutoff 1916 50.803082756324144 relax counter 0 log max v [km/s]= 4.3021673586027447 check gamma integral 5.3675456968196776E-002 3550 8.608397 2.846E+05 -26.045751 2.788336 51.691176 0.000000 0.000000 0.000000 0.219336 -3.710696 2577 217 -7.0387E+00 8.608273 0.865163 -18.397934 4.276007 -99.000000 51.691176 0.000000 0.044508 0.780664 0.619788 6 2.8768E+05 3.556407 8.502206 2.788336 -47.881416 -3.913006 49.156395 0.000004 0.000000 0.436424 0.467E+03 lgRho_cntr log_rel_run_E_err -7.8128647243824387 rel_E_err 1.2262252831562973D-12 Using fixed_vsurf 20000.000000000000 save photos/x550 for model 3550 k, q, energy_removed_layers before adjustment is 1884 0.98688335085770951 6.7232351421037900E+049 k, q, energy_removed_layers after adjustment is 1918 0.98199741843849608 7.0436226602232229E+049 Layers above q= 0.98199741843849608 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8559.4257812500000 max vel inside fraction of cutoff 2957.4622085253836 max c/cs inside fraction of cutoff 3.1819495366121817 average v/vesc outside cutoff 1.2004333992962444 Kinetic plus potential energy outside cutoff 7.0436226602232229E+049 mass inside cutoff 1918 50.760601169266302 relax counter 0 log max v [km/s]= 4.3023418887458043 check gamma integral 5.4265148654690884E-002 3560 8.588392 2.617E+05 -26.300834 2.740287 51.691176 0.000000 0.000000 0.000000 0.219336 -3.763578 2581 217 -7.0248E+00 8.588288 0.906946 -20.002220 4.121658 -99.000000 51.691176 0.000000 0.044508 0.780664 0.622093 5 2.8768E+05 3.501289 8.439709 2.740287 -51.227239 -4.086483 49.156395 0.000004 0.000000 0.436424 0.485E+03 max increase log_rel_run_E_err -7.8125342439728591 rel_E_err 1.1371755321076321D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1892 0.98580864882653862 7.2265959154363462E+049 k, q, energy_removed_layers after adjustment is 1922 0.98099688745867342 7.5056793137385728E+049 Layers above q= 0.98099688745867342 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8585.1796875000000 max vel inside fraction of cutoff 2836.6500480665518 max c/cs inside fraction of cutoff 3.2129643153814627 average v/vesc outside cutoff 1.2248495543592601 Kinetic plus potential energy outside cutoff 7.5056793137385728E+049 mass inside cutoff 1922 50.708882546517749 relax counter 0 log max v [km/s]= 4.3020577969529192 check gamma integral 5.4846859436952049E-002 3570 8.567933 2.367E+05 -26.572486 2.692217 51.691176 0.000000 0.000000 0.000000 0.219336 -3.817685 2584 217 -6.9297E+00 8.567853 0.954617 -21.836040 3.963474 -99.000000 51.691176 0.000000 0.044508 0.780664 0.624497 5 2.8768E+05 3.445009 8.361068 2.692217 -54.809911 -4.278597 49.156395 0.000004 0.000000 0.436424 0.510E+03 max increase log_rel_run_E_err -7.8122227078928113 rel_E_err 1.0801416882314456D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1897 0.98465146082647237 7.7262544379149999E+049 k, q, energy_removed_layers after adjustment is 1925 0.98018274566876085 7.9552206145750270E+049 Layers above q= 0.98018274566876085 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8617.7558593750000 max vel inside fraction of cutoff 2713.7767727610330 max c/cs inside fraction of cutoff 3.2717043001761899 average v/vesc outside cutoff 1.2564918830364922 Kinetic plus potential energy outside cutoff 7.9552206145750270E+049 mass inside cutoff 1925 50.666798600147807 relax counter 0 log max v [km/s]= 4.3019210963677574 check gamma integral 5.5447501756482442E-002 3580 8.547548 2.098E+05 -26.857838 2.644130 51.691176 0.000000 0.000000 0.000000 0.219336 -3.871592 2587 217 -6.7572E+00 8.547500 1.010566 -24.041911 3.805333 -99.000000 51.691176 0.000000 0.044508 0.780664 0.626940 6 2.8768E+05 3.389038 8.263457 2.644130 -58.549438 -4.495273 49.156395 0.000004 0.000000 0.436424 0.546E+03 lgRho_cntr log_rel_run_E_err -7.8119415232466478 rel_E_err 9.5592572430655800D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1902 0.98335003662551002 8.2204288091470139E+049 k, q, energy_removed_layers after adjustment is 1926 0.97922391500273176 8.3914774254449824E+049 Layers above q= 0.97922391500273176 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8660.8359375000000 max vel inside fraction of cutoff 2553.1627442765289 max c/cs inside fraction of cutoff 3.2967764850467565 average v/vesc outside cutoff 1.2965058075209082 Kinetic plus potential energy outside cutoff 8.3914774254449824E+049 mass inside cutoff 1926 50.617235515649526 relax counter 0 log max v [km/s]= 4.3018528728196763 check gamma integral 5.6055337200267688E-002 3590 8.528742 1.805E+05 -27.143453 2.599574 51.691176 0.000000 0.000000 0.000000 0.219336 -3.921283 2597 217 -6.6109E+00 8.528735 1.079583 -26.841446 3.658655 -99.000000 51.691176 0.000000 0.044508 0.780664 0.629241 6 2.8768E+05 3.337514 8.139925 2.599574 -62.159264 -4.747929 49.156395 0.000004 0.000000 0.436424 0.602E+03 varcontrol log_rel_run_E_err -7.8116816658800348 rel_E_err 9.2775873646382901D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1910 0.98212113509260335 8.6785186981352144E+049 k, q, energy_removed_layers after adjustment is 1931 0.97857529088994677 8.8132447456642699E+049 Layers above q= 0.97857529088994677 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8722.2265625000000 max vel inside fraction of cutoff 2391.5989460476981 max c/cs inside fraction of cutoff 3.3812603265872103 average v/vesc outside cutoff 1.3545836541671843 Kinetic plus potential energy outside cutoff 8.8132447456642699E+049 mass inside cutoff 1931 50.583707372622221 relax counter 0 log max v [km/s]= 4.3016488805554705 check gamma integral 5.6632194980256088E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 8.518079 1.426E+05 -27.366413 2.573853 51.691176 0.000000 0.000000 0.000000 0.219336 -3.949479 2569 217 -6.3394E+00 8.518079 1.188028 -31.280995 3.572196 -99.000000 51.691176 0.000000 0.044508 0.780664 0.630571 6 2.8768E+05 3.308298 7.947229 2.573853 -64.302948 -5.116378 49.156395 0.000004 0.000000 0.436424 0.718E+03 varcontrol log_rel_run_E_err -7.8114451805361309 rel_E_err 8.1054243568649637D-13 Using fixed_vsurf 20000.000000000000 save LOGS/profile22.data for model 3600 save photos/x600 for model 3600 k, q, energy_removed_layers before adjustment is 1871 0.98048270787207925 9.1984694167647049E+049 k, q, energy_removed_layers after adjustment is 1887 0.97776451074896520 9.2737627054348227E+049 Layers above q= 0.97776451074896520 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8840.7343750000000 max vel inside fraction of cutoff 2118.3998514758405 max c/cs inside fraction of cutoff 3.4380043320743590 average v/vesc outside cutoff 1.4515713970508106 Kinetic plus potential energy outside cutoff 9.2737627054348227E+049 mass inside cutoff 1887 50.541797193838079 relax counter 0 log max v [km/s]= 4.3014695590458372 check gamma integral 5.7006427038077706E-002 3610 8.537955 1.164E+05 -27.179030 2.620378 51.691176 0.000000 0.000000 0.000000 0.219336 -3.897326 2561 217 -6.5463E+00 8.537955 1.286649 -32.666287 3.720269 -99.000000 51.691176 0.000000 0.044508 0.780664 0.628010 5 2.8768E+05 3.362622 7.792096 2.620378 -60.445576 -5.464864 49.156395 0.000004 0.000000 0.436424 0.810E+03 lgRho_cntr log_rel_run_E_err -7.8112168474555803 rel_E_err 8.2156440688016451D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1847 0.97938607103092756 9.5034346458542136E+049 k, q, energy_removed_layers after adjustment is 1859 0.97735912067847430 9.5461395485641406E+049 Layers above q= 0.97735912067847430 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8977.4589843750000 max vel inside fraction of cutoff 1888.9562837425196 max c/cs inside fraction of cutoff 3.4779094091457905 average v/vesc outside cutoff 1.5552260988628193 Kinetic plus potential energy outside cutoff 9.5461395485641406E+049 mass inside cutoff 1859 50.520842104445997 relax counter 0 log max v [km/s]= 4.3011629300042191 check gamma integral 5.6495022817904687E-002 3620 8.558358 1.073E+05 -26.935849 2.668122 51.691176 0.000000 0.000000 0.000000 0.219336 -3.843770 2557 217 -6.7682E+00 8.558358 1.326851 -31.965709 3.875270 -99.000000 51.691176 0.000000 0.044508 0.780664 0.625436 5 2.8768E+05 3.418482 7.730912 2.668122 -56.640419 -5.617005 49.156395 0.000004 0.000000 0.436424 0.853E+03 lgRho_cntr log_rel_run_E_err -7.8109833942392104 rel_E_err 8.5812908777295878D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1832 0.97906218735538786 9.5951992690810974E+049 k, q, energy_removed_layers after adjustment is 1843 0.97711588663617999 9.6301299820219070E+049 Layers above q= 0.97711588663617999 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9042.7363281250000 max vel inside fraction of cutoff 1784.1305647972861 max c/cs inside fraction of cutoff 3.4520552883403330 average v/vesc outside cutoff 1.5922664039992214 Kinetic plus potential energy outside cutoff 9.6301299820219070E+049 mass inside cutoff 1843 50.508269050810760 relax counter 0 log max v [km/s]= 4.3010928323705926 check gamma integral 5.5932270632267897E-002 3630 8.577692 1.015E+05 -26.697639 2.713266 51.691176 0.000000 0.000000 0.000000 0.219336 -3.793019 2565 217 -6.8757E+00 8.577692 1.353470 -31.311005 4.022682 -99.000000 51.691176 0.000000 0.044508 0.780664 0.623048 5 2.8768E+05 3.471497 7.687646 2.713266 -53.188390 -5.716861 49.156395 0.000004 0.000000 0.436424 0.888E+03 lgRho_cntr log_rel_run_E_err -7.8107414057996793 rel_E_err 8.6740168095244013D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1823 0.97889960294633893 9.6470613129349320E+049 k, q, energy_removed_layers after adjustment is 1833 0.97711588663618010 9.6786800374133588E+049 Layers above q= 0.97711588663618010 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9089.4042968750000 max vel inside fraction of cutoff 1725.1566472090865 max c/cs inside fraction of cutoff 3.4518114705789222 average v/vesc outside cutoff 1.6243591337563841 Kinetic plus potential energy outside cutoff 9.6786800374133588E+049 mass inside cutoff 1833 50.508269050810775 relax counter 0 log max v [km/s]= 4.3010721491689674 check gamma integral 5.5388913517874484E-002 3640 8.596689 9.719E+04 -26.461850 2.757502 51.691176 0.000000 0.000000 0.000000 0.219336 -3.743163 2560 217 -6.9520E+00 8.596689 1.374026 -30.686967 4.167774 -99.000000 51.691176 0.000000 0.044508 0.780664 0.620745 5 2.8768E+05 3.523665 7.653155 2.757502 -49.937212 -5.792864 49.156395 0.000004 0.000000 0.436424 0.916E+03 lgRho_cntr log_rel_run_E_err -7.8104875135794094 rel_E_err 9.6309945584160532D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1810 0.97873744691814291 9.6849306406601276E+049 k, q, energy_removed_layers after adjustment is 1820 0.97695373060798407 9.7126996120301240E+049 Layers above q= 0.97695373060798407 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9127.4550781250000 max vel inside fraction of cutoff 1679.6589615259093 max c/cs inside fraction of cutoff 3.4484518512250451 average v/vesc outside cutoff 1.6446725647227771 Kinetic plus potential energy outside cutoff 9.7126996120301240E+049 mass inside cutoff 1820 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010613523141350 check gamma integral 5.4849274336866753E-002 3650 8.615503 9.379E+04 -26.228984 2.804551 51.691176 0.000000 0.000000 0.000000 0.219336 -3.693810 2566 217 -7.0128E+00 8.615503 1.390891 -30.090584 4.311680 -99.000000 51.691176 0.000000 0.044508 0.780664 0.618509 5 2.8768E+05 3.575403 7.625073 2.804551 -46.849534 -5.854464 49.167317 0.000004 0.000000 0.436424 0.939E+03 lgRho_cntr log_rel_run_E_err -7.8102250238654713 rel_E_err 9.5995052565057115D-13 Using fixed_vsurf 20000.000000000000 save photos/x650 for model 3650 k, q, energy_removed_layers before adjustment is 1807 0.97857529088994677 9.7147102504565846E+049 k, q, energy_removed_layers after adjustment is 1816 0.97695373060798418 9.7385742852621284E+049 Layers above q= 0.97695373060798418 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9160.0449218750000 max vel inside fraction of cutoff 1642.3568764687664 max c/cs inside fraction of cutoff 3.4435514844233137 average v/vesc outside cutoff 1.6657212238027677 Kinetic plus potential energy outside cutoff 9.7385742852621284E+049 mass inside cutoff 1816 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010545535120395 check gamma integral 5.4310727928553015E-002 3660 8.634195 9.103E+04 -25.999434 2.854237 51.691176 0.000000 0.000000 0.000000 0.219336 -3.644805 2568 217 -7.0643E+00 8.634195 1.405211 -29.520255 4.454912 -99.000000 51.691176 0.000000 0.044508 0.780664 0.616328 5 2.8768E+05 3.626879 7.601897 2.854237 -43.906778 -5.906834 49.167317 0.000004 0.000000 0.436424 0.957E+03 lgRho_cntr log_rel_run_E_err -7.8099488771522338 rel_E_err 9.9721502944551562D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1802 0.97857529088994677 9.7344558090099323E+049 k, q, energy_removed_layers after adjustment is 1811 0.97695373060798418 9.7591411510979294E+049 Layers above q= 0.97695373060798418 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9188.7246093750000 max vel inside fraction of cutoff 1610.7005592095331 max c/cs inside fraction of cutoff 3.4378198657384247 average v/vesc outside cutoff 1.6838718988107677 Kinetic plus potential energy outside cutoff 9.7591411510979294E+049 mass inside cutoff 1811 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010499163874369 check gamma integral 5.3772357018825524E-002 3670 8.652798 8.874E+04 -25.773576 2.903710 51.691176 0.000000 0.000000 0.000000 0.219336 -3.596076 2565 217 -7.1095E+00 8.652798 1.417647 -28.974707 4.597909 -99.000000 51.691176 0.000000 0.044508 0.780664 0.614198 5 2.8768E+05 3.678177 7.582369 2.903710 -41.096743 -5.952909 49.167317 0.000004 0.000000 0.436424 0.971E+03 lgRho_cntr log_rel_run_E_err -7.8096618295960392 rel_E_err 1.0589724489876558D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1797 0.97841313486175052 9.7554061102128173E+049 k, q, energy_removed_layers after adjustment is 1805 0.97695373060798418 9.7760140061170142E+049 Layers above q= 0.97695373060798418 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9214.4121093750000 max vel inside fraction of cutoff 1583.2209123069676 max c/cs inside fraction of cutoff 3.4316341116834046 average v/vesc outside cutoff 1.6998471802855433 Kinetic plus potential energy outside cutoff 9.7760140061170142E+049 mass inside cutoff 1805 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010465967522737 check gamma integral 5.3233809467725018E-002 3680 8.671327 8.678E+04 -25.551688 2.953011 51.691176 0.000000 0.000000 0.000000 0.219336 -3.547584 2578 217 -7.1500E+00 8.671327 1.428622 -28.453094 4.741337 -99.000000 51.691176 0.000000 0.044508 0.780664 0.612117 4 2.8768E+05 3.729343 7.565568 2.953011 -38.410449 -5.994074 49.167317 0.000004 0.000000 0.436424 0.983E+03 lgRho_cntr log_rel_run_E_err -7.8093567428676307 rel_E_err 1.1270284241956543D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1797 0.97841313486175052 9.7691030414415329E+049 k, q, energy_removed_layers after adjustment is 1805 0.97695373060798418 9.7901793720867718E+049 Layers above q= 0.97695373060798418 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9237.7011718750000 max vel inside fraction of cutoff 1558.9780932784297 max c/cs inside fraction of cutoff 3.4252145125547035 average v/vesc outside cutoff 1.7141133943561182 Kinetic plus potential energy outside cutoff 9.7901793720867718E+049 mass inside cutoff 1805 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010441333487694 check gamma integral 5.2694961101310556E-002 3690 8.689793 8.508E+04 -25.333835 3.002163 51.691176 0.000000 0.000000 0.000000 0.219336 -3.499312 2579 217 -7.1869E+00 8.689793 1.438428 -27.954299 4.886456 -99.000000 51.691176 0.000000 0.044508 0.780664 0.610082 4 2.8768E+05 3.780402 7.550941 3.002163 -35.840521 -6.031211 49.167317 0.000004 0.000000 0.436424 0.993E+03 lgRho_cntr log_rel_run_E_err -7.8090387789604137 rel_E_err 1.1474977442683805D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1794 0.97841313486175041 9.7808255914583348E+049 k, q, energy_removed_layers after adjustment is 1802 0.97695373060798407 9.8022875314559245E+049 Layers above q= 0.97695373060798407 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9259.0156250000000 max vel inside fraction of cutoff 1662.6084873885859 max c/cs inside fraction of cutoff 3.4186953401522411 average v/vesc outside cutoff 1.7269972115905161 Kinetic plus potential energy outside cutoff 9.8022875314559245E+049 mass inside cutoff 1802 50.499887015053957 relax counter 0 log max v [km/s]= 4.3010422388998784 check gamma integral 5.2155623359517803E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 8.708205 8.360E+04 -25.120229 3.051184 51.691176 0.000000 0.000000 0.000000 0.219336 -3.451247 2581 217 -7.2208E+00 8.708205 1.447279 -27.477290 5.035612 -99.000000 51.691176 0.000000 0.044508 0.780664 0.608091 4 2.8768E+05 3.831377 7.538100 3.051184 -33.380363 -6.065015 49.167317 0.000004 0.000000 0.436424 0.100E+04 lgRho_cntr log_rel_run_E_err -7.8087006492932449 rel_E_err 1.1922850772841532D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile23.data for model 3700 save photos/x700 for model 3700 k, q, energy_removed_layers before adjustment is 1792 0.97825138339562934 9.7953764770858618E+049 k, q, energy_removed_layers after adjustment is 1799 0.97695373060798396 9.8127892830607260E+049 Layers above q= 0.97695373060798396 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9278.6718750000000 max vel inside fraction of cutoff 1826.8350231453740 max c/cs inside fraction of cutoff 3.4121610566046479 average v/vesc outside cutoff 1.7387381906785710 Kinetic plus potential energy outside cutoff 9.8127892830607260E+049 mass inside cutoff 1799 50.499887015053950 relax counter 0 log max v [km/s]= 4.3010407340420347 check gamma integral 5.1615603654173517E-002 3710 8.726566 8.229E+04 -24.910993 3.100087 51.691176 0.000000 0.000000 0.000000 0.219336 -3.403381 2591 217 -7.2522E+00 8.726566 1.455333 -27.021472 5.192818 -99.000000 51.691176 0.000000 0.044508 0.780664 0.606143 4 2.8768E+05 3.882282 7.526721 3.100087 -31.024198 -6.096039 49.167317 0.000004 0.000000 0.436424 0.101E+04 lgRho_cntr log_rel_run_E_err -7.8083464880810380 rel_E_err 1.3058281920496629D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1791 0.97825138339562934 9.8043515839491572E+049 k, q, energy_removed_layers after adjustment is 1798 0.97695373060798396 9.8220066098294502E+049 Layers above q= 0.97695373060798396 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9296.9062500000000 max vel inside fraction of cutoff 2000.8446037948036 max c/cs inside fraction of cutoff 3.4056671479454916 average v/vesc outside cutoff 1.7495156175417290 Kinetic plus potential energy outside cutoff 9.8220066098294502E+049 mass inside cutoff 1798 50.499887015053950 relax counter 0 log max v [km/s]= 4.3010395095486347 check gamma integral 5.1074905167424162E-002 3720 8.744878 8.112E+04 -24.705931 3.148868 51.691176 0.000000 0.000000 0.000000 0.219336 -3.355724 2591 217 -7.2813E+00 8.744878 1.462715 -26.585745 5.364255 -99.000000 51.691176 0.000000 0.044508 0.780664 0.604238 4 2.8768E+05 3.933115 7.516535 3.148868 -28.767322 -6.124731 49.167317 0.000004 0.000000 0.436424 0.102E+04 lgRho_cntr log_rel_run_E_err -7.8079738958125811 rel_E_err 1.4013513518772148D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1784 0.97825138339562934 9.8123161701485915E+049 k, q, energy_removed_layers after adjustment is 1791 0.97695373060798396 9.8301804255813397E+049 Layers above q= 0.97695373060798396 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9313.9199218750000 max vel inside fraction of cutoff 2176.4265468161880 max c/cs inside fraction of cutoff 3.3992472141781755 average v/vesc outside cutoff 1.7594728305463103 Kinetic plus potential energy outside cutoff 9.8301804255813397E+049 mass inside cutoff 1791 50.499887015053950 relax counter 0 log max v [km/s]= 4.3010385028902576 check gamma integral 5.0533401823212497E-002 3730 8.763143 8.006E+04 -24.504772 3.197535 51.691176 0.000000 0.000000 0.000000 0.219336 -3.308274 2593 217 -7.3081E+00 8.763143 1.469527 -26.168568 5.557837 -99.000000 51.691176 0.000000 0.044508 0.780664 0.602374 4 2.8768E+05 3.983885 7.507333 3.197535 -26.604613 -6.151457 49.167317 0.000004 0.000000 0.436424 0.102E+04 lgRho_cntr log_rel_run_E_err -7.8075825300294257 rel_E_err 1.4389658026018008D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1782 0.97825138339562934 9.8194517346981424E+049 k, q, energy_removed_layers after adjustment is 1789 0.97695373060798396 9.8374991623422600E+049 Layers above q= 0.97695373060798396 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9329.8789062500000 max vel inside fraction of cutoff 2368.9573046713417 max c/cs inside fraction of cutoff 3.3929172898147866 average v/vesc outside cutoff 1.7687309626009480 Kinetic plus potential energy outside cutoff 9.8374991623422600E+049 mass inside cutoff 1789 50.499887015053950 relax counter 0 log max v [km/s]= 4.3010376637871452 check gamma integral 4.9990597631779848E-002 3740 8.781364 7.909E+04 -24.307554 3.246091 51.691176 0.000000 0.000000 0.000000 0.219336 -3.261032 2604 217 -7.3329E+00 8.781364 1.475850 -25.769036 5.780610 -99.000000 51.691176 0.000000 0.044508 0.780664 0.600551 4 2.8768E+05 4.034598 7.498969 3.246091 -24.531814 -6.176484 49.167317 0.000004 0.000000 0.436424 0.103E+04 lgRho_cntr log_rel_run_E_err -7.8071645117335597 rel_E_err 1.5644062558768994D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1779 0.97825138339562934 9.8258957201642641E+049 k, q, energy_removed_layers after adjustment is 1787 0.97679171286560984 9.8441086275739509E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9344.9199218750000 max vel inside fraction of cutoff 2577.5168958508966 max c/cs inside fraction of cutoff 3.3567835110714852 average v/vesc outside cutoff 1.7715774277858642 Kinetic plus potential energy outside cutoff 9.8441086275739509E+049 mass inside cutoff 1787 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010369549027354 check gamma integral 4.9446309752635975E-002 3750 8.799531 7.821E+04 -24.114238 3.294516 51.691176 0.000000 0.000000 0.000000 0.219336 -3.214026 2609 217 -7.3551E+00 8.799531 1.481757 -25.386228 6.035247 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598769 5 2.8768E+05 4.085231 7.491314 3.294516 -22.545611 -6.200037 49.167317 0.000004 0.000000 0.436424 0.103E+04 lgRho_cntr log_rel_run_E_err -7.8067297794445016 rel_E_err 1.6170666504497976D-12 Using fixed_vsurf 20000.000000000000 save photos/x750 for model 3750 k, q, energy_removed_layers before adjustment is 1778 0.97808882280535780 9.8357303519636624E+049 k, q, energy_removed_layers after adjustment is 1785 0.97679171286560984 9.8501389737433923E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9359.1699218750000 max vel inside fraction of cutoff 2808.1239458285850 max c/cs inside fraction of cutoff 3.3502297099438390 average v/vesc outside cutoff 1.7796599758851683 Kinetic plus potential energy outside cutoff 9.8501389737433923E+049 mass inside cutoff 1785 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010363638576683 check gamma integral 4.8899605151351583E-002 3760 8.817654 7.740E+04 -23.924612 3.342833 51.691176 0.000000 0.000000 0.000000 0.219336 -3.167239 2626 217 -7.3752E+00 8.817654 1.487312 -25.019162 6.318283 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597028 5 2.8768E+05 4.135806 7.484253 3.342833 -20.640956 -6.222322 49.167317 0.000004 0.000000 0.436424 0.104E+04 lgRho_cntr log_rel_run_E_err -7.8062548771516269 rel_E_err 1.7456566425463433D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1777 0.97808882280535780 9.8411349071948319E+049 k, q, energy_removed_layers after adjustment is 1784 0.97679171286560984 9.8556744892838477E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9372.7480468750000 max vel inside fraction of cutoff 3048.7947740179284 max c/cs inside fraction of cutoff 3.3437796442674834 average v/vesc outside cutoff 1.7873084935994603 Kinetic plus potential energy outside cutoff 9.8556744892838477E+049 mass inside cutoff 1784 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010358618333244 check gamma integral 4.8348854649279800E-002 3770 8.835745 7.664E+04 -23.739152 3.391073 51.691176 0.000000 0.000000 0.000000 0.219336 -3.120641 2638 217 -7.3945E+00 8.835745 1.492557 -24.668044 6.621288 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595327 5 2.8768E+05 4.186361 7.477707 3.391073 -18.813346 -6.243457 49.167317 0.000004 0.000000 0.436424 0.105E+04 lgRho_cntr log_rel_run_E_err -7.8057536644254393 rel_E_err 1.8572763462722696D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1776 0.97808882280535780 9.8461227389674545E+049 k, q, energy_removed_layers after adjustment is 1783 0.97679171286560984 9.8607820847099035E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9385.7265625000000 max vel inside fraction of cutoff 3326.8183320534613 max c/cs inside fraction of cutoff 3.3374321403880063 average v/vesc outside cutoff 1.7945711463090039 Kinetic plus potential energy outside cutoff 9.8607820847099035E+049 mass inside cutoff 1783 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010354161613655 check gamma integral 4.7793650405025159E-002 3780 8.853792 7.594E+04 -23.558691 3.441127 51.691176 0.000000 0.000000 0.000000 0.219336 -3.074264 2642 217 -7.4122E+00 8.853792 1.497524 -24.329928 6.934407 -99.000000 51.691176 0.000000 0.044508 0.780664 0.593668 5 2.8768E+05 4.236864 7.471612 3.441127 -17.060908 -6.263538 49.167317 0.000004 0.000000 0.436424 0.105E+04 lgRho_cntr log_rel_run_E_err -7.8051494633591050 rel_E_err 2.9498441261240454D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1774 0.97808882280535780 9.8507452450636980E+049 k, q, energy_removed_layers after adjustment is 1781 0.97679171286560984 9.8655147427662338E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9398.1621093750000 max vel inside fraction of cutoff 3624.1003911883608 max c/cs inside fraction of cutoff 3.5595457469914997 average v/vesc outside cutoff 1.8014856411617413 Kinetic plus potential energy outside cutoff 9.8655147427662338E+049 mass inside cutoff 1781 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010350279259875 check gamma integral 4.7233009255071970E-002 3790 8.871770 7.528E+04 -23.382943 3.494426 51.691176 0.000000 0.000000 0.000000 0.219336 -3.028160 2648 217 -7.4262E+00 8.871770 1.502259 -22.823199 7.249644 -99.000000 51.691176 0.000000 0.044508 0.780664 0.592053 5 2.8768E+05 4.287252 7.465890 3.494426 -15.382184 -6.282727 49.167317 0.000004 0.000000 0.436424 0.105E+04 lgRho_cntr log_rel_run_E_err -7.8028502071246004 rel_E_err 1.5112600610467262D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1773 0.97808882280535769 9.8550634845679486E+049 k, q, energy_removed_layers after adjustment is 1780 0.97679171286560973 9.8699352242158416E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9410.1562500000000 max vel inside fraction of cutoff 3884.1465897011949 max c/cs inside fraction of cutoff 3.8174299433867107 average v/vesc outside cutoff 1.8081124032250318 Kinetic plus potential energy outside cutoff 9.8699352242158416E+049 mass inside cutoff 1780 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010347106769951 check gamma integral 4.6663367909566753E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 8.889670 7.465E+04 -23.211936 3.546652 51.691176 0.000000 0.000000 0.000000 0.219336 -2.982344 2665 217 -7.4355E+00 8.889670 1.506822 -19.981734 7.561771 -99.000000 51.691176 0.000000 0.044508 0.780664 0.590488 5 2.8768E+05 4.337501 7.460452 3.546652 -13.774403 -6.301245 49.167317 0.000004 0.000000 0.436424 0.106E+04 lgRho_cntr log_rel_run_E_err -7.7808392859269855 rel_E_err 1.7275012680232382D-10 Using fixed_vsurf 20000.000000000000 save LOGS/profile24.data for model 3800 save photos/x800 for model 3800 k, q, energy_removed_layers before adjustment is 1771 0.97808882280535769 9.8591442903707124E+049 k, q, energy_removed_layers after adjustment is 1778 0.97679171286560973 9.8741121012266383E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9421.8359375000000 max vel inside fraction of cutoff 4119.7277391586676 max c/cs inside fraction of cutoff 4.0869314239864796 average v/vesc outside cutoff 1.8145302658992175 Kinetic plus potential energy outside cutoff 9.8741121012266383E+049 mass inside cutoff 1778 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010344636693381 check gamma integral 4.6079542176719716E-002 3810 8.907481 7.405E+04 -23.046212 3.599611 51.691176 0.000000 0.000000 0.000000 0.219336 -2.936821 2676 217 -7.4394E+00 8.907481 1.511271 -17.850599 7.867304 -99.000000 51.691176 0.000000 0.044508 0.780664 0.588975 5 2.8768E+05 4.387590 7.455222 3.599611 -12.235392 -6.319307 49.167317 0.000004 0.000000 0.436424 0.106E+04 lgRho_cntr log_rel_run_E_err -7.7456853685737608 rel_E_err 7.6837832696736406D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1769 0.97808882280535769 9.8630481524287771E+049 k, q, energy_removed_layers after adjustment is 1776 0.97679171286560973 9.8781073562780800E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9433.3417968750000 max vel inside fraction of cutoff 4232.8891250702645 max c/cs inside fraction of cutoff 4.2167167830493515 average v/vesc outside cutoff 1.8208181032149002 Kinetic plus potential energy outside cutoff 9.8781073562780800E+049 mass inside cutoff 1776 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010342820060492 check gamma integral 4.5475494610802809E-002 3820 8.927334 7.338E+04 -22.866903 3.659576 51.691176 0.000000 0.000000 0.000000 0.219336 -2.886136 2689 217 -7.3552E+00 8.927334 1.516218 -15.820870 8.200101 -99.000000 51.691176 0.000000 0.044508 0.780664 0.587343 5 2.8768E+05 4.443536 7.449491 3.659576 -10.587724 -6.339386 49.167317 0.000004 0.000000 0.436424 0.107E+04 max increase log_rel_run_E_err -7.6476275643442406 rel_E_err 6.8715484281679349D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1769 0.97792666677716145 9.8708570304955092E+049 k, q, energy_removed_layers after adjustment is 1775 0.97679171286560973 9.8824619538500080E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9446.2773437500000 max vel inside fraction of cutoff 4391.7124233185295 max c/cs inside fraction of cutoff 4.4133816271768893 average v/vesc outside cutoff 1.8278458753772078 Kinetic plus potential energy outside cutoff 9.8824619538500080E+049 mass inside cutoff 1775 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010349973921800 check gamma integral 4.4767787603221212E-002 3830 8.947719 7.270E+04 -22.695327 3.723025 51.691176 0.000000 0.000000 0.000000 0.219336 -2.834069 2700 217 -7.3401E+00 8.947719 1.521417 -14.256558 8.530752 -99.000000 51.691176 0.000000 0.044508 0.780664 0.585741 5 2.8768E+05 4.501134 7.443562 3.723025 -8.968643 -6.360466 49.167317 0.000004 0.000000 0.436424 0.107E+04 lgRho_cntr log_rel_run_E_err -7.5832837099596944 rel_E_err 8.9976897530230894D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1768 0.97792666677716134 9.8752456579099696E+049 k, q, energy_removed_layers after adjustment is 1774 0.97679171286560962 9.8869395102291875E+049 Layers above q= 0.97679171286560962 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9460.0253906250000 max vel inside fraction of cutoff 4501.0491783055895 max c/cs inside fraction of cutoff 4.5426421865470505 average v/vesc outside cutoff 1.8352715296151623 Kinetic plus potential energy outside cutoff 9.8869395102291875E+049 mass inside cutoff 1774 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010349727538886 check gamma integral 4.3993818793829513E-002 3840 8.966752 7.200E+04 -22.549523 3.785509 51.691176 0.000000 0.000000 0.000000 0.219336 -2.785316 2702 217 -7.3624E+00 8.966752 1.526760 -12.813361 8.828993 -99.000000 51.691176 0.000000 0.044508 0.780664 0.584332 6 2.8768E+05 4.555092 7.437568 3.785509 -7.519301 -6.382107 49.167317 0.000004 0.000000 0.436424 0.108E+04 min_dr_div_cs log_rel_run_E_err -7.5504926772320777 rel_E_err 2.5549949749381790D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1765 0.97792666677716134 9.8796571484979822E+049 k, q, energy_removed_layers after adjustment is 1771 0.97679171286560962 9.8914396886605030E+049 Layers above q= 0.97679171286560962 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9474.3300781250000 max vel inside fraction of cutoff 4572.4233346669616 max c/cs inside fraction of cutoff 4.6420194605850202 average v/vesc outside cutoff 1.8429481145845334 Kinetic plus potential energy outside cutoff 9.8914396886605030E+049 mass inside cutoff 1771 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010345390262508 check gamma integral 4.3210314128831313E-002 3850 8.984108 7.110E+04 -22.416086 3.847817 51.691176 0.000000 0.000000 0.000000 0.219336 -2.740632 2701 217 -7.0555E+00 8.984108 1.533833 -11.487385 9.091371 -99.000000 51.691176 0.000000 0.044508 0.780664 0.583134 6 2.8768E+05 4.604486 7.429801 3.847817 -6.246455 -6.410712 49.167317 0.000004 0.000000 0.436424 0.109E+04 max increase log_rel_run_E_err -7.5500696701705872 rel_E_err 2.9514354611385439D-12 Using fixed_vsurf 20000.000000000000 save photos/x850 for model 3850 k, q, energy_removed_layers before adjustment is 1764 0.97792666677716134 9.8853418936768144E+049 k, q, energy_removed_layers after adjustment is 1770 0.97679171286560962 9.8972373516431784E+049 Layers above q= 0.97679171286560962 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9493.5410156250000 max vel inside fraction of cutoff 4537.7948953073046 max c/cs inside fraction of cutoff 4.7283656513471417 average v/vesc outside cutoff 1.8531790502363150 Kinetic plus potential energy outside cutoff 9.8972373516431784E+049 mass inside cutoff 1770 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010386014530226 check gamma integral 4.2399983063572087E-002 3860 8.984943 6.990E+04 -22.371152 3.854514 51.691176 0.000000 0.000000 0.000000 0.219336 -2.738497 2718 217 -7.0638E+00 8.984943 1.543454 -10.150453 9.111629 -99.000000 51.691176 0.000000 0.044508 0.780664 0.583074 6 2.8768E+05 4.606858 7.419490 3.854514 -6.169440 -6.449547 49.167317 0.000004 0.000000 0.436424 0.110E+04 min_dr_div_cs log_rel_run_E_err -7.5490804995520584 rel_E_err 2.7876863694883273D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1762 0.97792666677716089 9.8928017906452720E+049 k, q, energy_removed_layers after adjustment is 1768 0.97679171286560917 9.9048422999008763E+049 Layers above q= 0.97679171286560917 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9520.1757812500000 max vel inside fraction of cutoff 4477.0995537637100 max c/cs inside fraction of cutoff 4.8280306825604455 average v/vesc outside cutoff 1.8672244383930825 Kinetic plus potential energy outside cutoff 9.9048422999008763E+049 mass inside cutoff 1768 50.491512127453824 relax counter 0 log max v [km/s]= 4.3010378822440600 check gamma integral 4.2216867946159399E-002 3870 8.970538 6.888E+04 -22.476874 3.801001 51.691176 0.000000 0.000000 0.000000 0.219336 -2.775898 2726 217 -7.0534E+00 8.970534 1.551784 -9.356041 8.896508 -99.000000 51.691176 0.000000 0.044508 0.780664 0.584007 6 2.8768E+05 4.565713 7.410727 3.801001 -7.208011 -6.483039 49.167317 0.000004 0.000000 0.436424 0.110E+04 min_dr_div_cs log_rel_run_E_err -7.5459688103830560 rel_E_err 1.7376944372196063D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1758 0.97792666677716100 9.8990243644846943E+049 k, q, energy_removed_layers after adjustment is 1764 0.97679171286560929 9.9111822311421453E+049 Layers above q= 0.97679171286560929 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9543.7207031250000 max vel inside fraction of cutoff 4403.1041534608885 max c/cs inside fraction of cutoff 4.8384931329926415 average v/vesc outside cutoff 1.8795050284906056 Kinetic plus potential energy outside cutoff 9.9111822311421453E+049 mass inside cutoff 1764 50.491512127453838 relax counter 0 log max v [km/s]= 4.3010378159202167 check gamma integral 4.2791138729686644E-002 3880 8.951636 6.807E+04 -22.643697 3.736685 51.691176 0.000000 0.000000 0.000000 0.219336 -2.824840 2734 217 -7.2671E+00 8.951610 1.558573 -9.107964 8.602427 -99.000000 51.691176 0.000000 0.044508 0.780664 0.585308 6 2.8768E+05 4.511840 7.403673 3.736685 -8.628416 -6.510188 49.167317 0.000004 0.000000 0.436424 0.111E+04 lgRho_cntr log_rel_run_E_err -7.5455468915931183 rel_E_err 2.6946190246290332D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1758 0.97776451074896498 9.9070783092658204E+049 k, q, energy_removed_layers after adjustment is 1763 0.97679171286560951 9.9161874840231617E+049 Layers above q= 0.97679171286560951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9563.2421875000000 max vel inside fraction of cutoff 4274.3671972838010 max c/cs inside fraction of cutoff 4.8002498258804627 average v/vesc outside cutoff 1.8895969923669056 Kinetic plus potential energy outside cutoff 9.9161874840231617E+049 mass inside cutoff 1763 50.491512127453845 relax counter 0 log max v [km/s]= 4.3010346096759910 check gamma integral 4.3518450636117048E-002 3890 8.933330 6.745E+04 -22.804519 3.678911 51.691176 0.000000 0.000000 0.000000 0.219336 -2.872083 2737 217 -7.3410E+00 8.933287 1.563859 -9.223352 8.308860 -99.000000 51.691176 0.000000 0.044508 0.780664 0.586646 6 2.8768E+05 4.459849 7.398233 3.678911 -10.060822 -6.531206 49.167317 0.000004 0.000000 0.436424 0.112E+04 lgRho_cntr log_rel_run_E_err -7.5451504891747820 rel_E_err 2.6601543863910301D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1761 0.97776451074896498 9.9108198285089664E+049 k, q, energy_removed_layers after adjustment is 1766 0.97679171286560951 9.9199853788980094E+049 Layers above q= 0.97679171286560951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9578.6562500000000 max vel inside fraction of cutoff 4118.4906577210877 max c/cs inside fraction of cutoff 4.7198069628625934 average v/vesc outside cutoff 1.8975050229398387 Kinetic plus potential energy outside cutoff 9.9199853788980094E+049 mass inside cutoff 1766 50.491512127453845 relax counter 0 log max v [km/s]= 4.3010337452983727 check gamma integral 4.4150064756503050E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 8.915374 6.690E+04 -22.961276 3.624208 51.691176 0.000000 0.000000 0.000000 0.219336 -2.918364 2735 217 -7.3746E+00 8.915319 1.568505 -9.569921 8.013520 -99.000000 51.691176 0.000000 0.044508 0.780664 0.588022 6 2.8768E+05 4.408997 7.393487 3.624208 -11.521653 -6.549584 49.167317 0.000004 0.000000 0.436424 0.112E+04 lgRho_cntr log_rel_run_E_err -7.5447736842274464 rel_E_err 2.3924777949254092D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile25.data for model 3900 save photos/x900 for model 3900 k, q, energy_removed_layers before adjustment is 1758 0.97776451074896520 9.9140426563089811E+049 k, q, energy_removed_layers after adjustment is 1763 0.97679171286560973 9.9232552380675524E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9592.3613281250000 max vel inside fraction of cutoff 3957.4377583383493 max c/cs inside fraction of cutoff 4.6527849029154407 average v/vesc outside cutoff 1.9044954764487558 Kinetic plus potential energy outside cutoff 9.9232552380675524E+049 mass inside cutoff 1763 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010333443812057 check gamma integral 4.4713473370305401E-002 3910 8.897274 6.638E+04 -23.121767 3.570005 51.691176 0.000000 0.000000 0.000000 0.219336 -2.965020 2741 217 -7.3025E+00 8.897212 1.573006 -10.078330 7.707696 -99.000000 51.691176 0.000000 0.044508 0.780664 0.589462 6 2.8768E+05 4.357861 7.388920 3.570005 -13.054073 -6.567298 49.167317 0.000004 0.000000 0.436424 0.113E+04 max increase log_rel_run_E_err -7.5443865485541028 rel_E_err 3.7273692575182103D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1758 0.97776451074896520 9.9171054237328984E+049 k, q, energy_removed_layers after adjustment is 1763 0.97679171286560973 9.9263612892195881E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9605.7753906250000 max vel inside fraction of cutoff 3795.4988205300356 max c/cs inside fraction of cutoff 4.6026931786791438 average v/vesc outside cutoff 1.9113011948257079 Kinetic plus potential energy outside cutoff 9.9263612892195881E+049 mass inside cutoff 1763 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010337895741708 check gamma integral 4.5247863406280280E-002 3920 8.877018 6.581E+04 -23.306073 3.510408 51.691176 0.000000 0.000000 0.000000 0.219336 -3.017325 2739 217 -7.2181E+00 8.876950 1.578020 -10.790356 7.357331 -99.000000 51.691176 0.000000 0.044508 0.780664 0.591124 6 2.8768E+05 4.300743 7.383860 3.510408 -14.843391 -6.586933 49.167317 0.000004 0.000000 0.436424 0.113E+04 lgRho_cntr log_rel_run_E_err -7.5430699569682762 rel_E_err 2.3506657211608513D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1756 0.97776451074896542 9.9204488904049453E+049 k, q, energy_removed_layers after adjustment is 1761 0.97679171286560995 9.9297503017141503E+049 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9620.8867187500000 max vel inside fraction of cutoff 3560.9907750517314 max c/cs inside fraction of cutoff 4.4724456671871531 average v/vesc outside cutoff 1.9189224594226622 Kinetic plus potential energy outside cutoff 9.9297503017141503E+049 mass inside cutoff 1761 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010344034566064 check gamma integral 4.5819641024508993E-002 3930 8.857063 6.524E+04 -23.491183 3.451557 51.691176 0.000000 0.000000 0.000000 0.219336 -3.068949 2732 217 -7.3244E+00 8.856990 1.583018 -11.599154 7.008574 -99.000000 51.691176 0.000000 0.044508 0.780664 0.592814 6 2.8768E+05 4.244582 7.378853 3.451557 -16.684793 -6.606416 49.167317 0.000004 0.000000 0.436424 0.114E+04 lgRho_cntr log_rel_run_E_err -7.5427232907792554 rel_E_err 2.1304006138679772D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1754 0.97776451074896531 9.9237128902852505E+049 k, q, energy_removed_layers after adjustment is 1759 0.97679171286560984 9.9330569611471414E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9636.1250000000000 max vel inside fraction of cutoff 3360.8620580170054 max c/cs inside fraction of cutoff 4.3560194180444043 average v/vesc outside cutoff 1.9265627740926647 Kinetic plus potential energy outside cutoff 9.9330569611471414E+049 mass inside cutoff 1759 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010333314317819 check gamma integral 4.6361285182363467E-002 3940 8.837602 6.468E+04 -23.674444 3.396309 51.691176 0.000000 0.000000 0.000000 0.219336 -3.119403 2736 217 -7.3318E+00 8.837527 1.588054 -12.462300 6.670857 -99.000000 51.691176 0.000000 0.044508 0.780664 0.594508 6 2.8768E+05 4.189911 7.373815 3.396309 -18.559669 -6.625962 49.167317 0.000004 0.000000 0.436424 0.114E+04 lgRho_cntr log_rel_run_E_err -7.5424088913037952 rel_E_err 2.1071332415363283D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1750 0.97776451074896520 9.9269331355010739E+049 k, q, energy_removed_layers after adjustment is 1755 0.97679171286560973 9.9363174639351584E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9651.6582031250000 max vel inside fraction of cutoff 3180.4699653728862 max c/cs inside fraction of cutoff 4.2409278722090491 average v/vesc outside cutoff 1.9343038961790777 Kinetic plus potential energy outside cutoff 9.9363174639351584E+049 mass inside cutoff 1755 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010331430646156 check gamma integral 4.6874982573693331E-002 3950 8.817175 6.406E+04 -23.870303 3.341650 51.691176 0.000000 0.000000 0.000000 0.219336 -3.172502 2737 217 -7.1539E+00 8.817101 1.593636 -13.455506 6.328410 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596328 6 2.8768E+05 4.132616 7.368241 3.341650 -20.616140 -6.647534 49.167317 0.000004 0.000000 0.436424 0.115E+04 lgRho_cntr log_rel_run_E_err -7.5418712466669353 rel_E_err 1.7496005681074775D-11 Using fixed_vsurf 20000.000000000000 save photos/x950 for model 3950 k, q, energy_removed_layers before adjustment is 1750 0.97776451074896520 9.9304232171610891E+049 k, q, energy_removed_layers after adjustment is 1755 0.97679171286560973 9.9398490222959336E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9669.0878906250000 max vel inside fraction of cutoff 2985.8598839841288 max c/cs inside fraction of cutoff 4.1076594795263253 average v/vesc outside cutoff 1.9429354920675117 Kinetic plus potential energy outside cutoff 9.9398490222959336E+049 mass inside cutoff 1755 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010344728677179 check gamma integral 4.7403516177228905E-002 3960 8.797372 6.342E+04 -24.063370 3.288667 51.691176 0.000000 0.000000 0.000000 0.219336 -3.224100 2734 217 -7.2530E+00 8.797300 1.599437 -14.510045 6.021083 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598138 6 2.8768E+05 4.077161 7.362449 3.288667 -22.699503 -6.669845 49.167317 0.000004 0.000000 0.436424 0.115E+04 lgRho_cntr log_rel_run_E_err -7.5414379793212367 rel_E_err 1.8020175440729716D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1748 0.97776451074896531 9.9339637149270104E+049 k, q, energy_removed_layers after adjustment is 1753 0.97679171286560984 9.9434292466065753E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9687.4394531250000 max vel inside fraction of cutoff 2826.1930656237769 max c/cs inside fraction of cutoff 4.0331268183570970 average v/vesc outside cutoff 1.9519629854956491 Kinetic plus potential energy outside cutoff 9.9434292466065753E+049 mass inside cutoff 1753 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010333867232378 check gamma integral 4.7907029715667050E-002 3970 8.776727 6.269E+04 -24.269290 3.233417 51.691176 0.000000 0.000000 0.000000 0.219336 -3.278031 2738 217 -7.1435E+00 8.776660 1.606085 -15.714187 5.737734 -99.000000 51.691176 0.000000 0.044508 0.780664 0.600066 6 2.8768E+05 4.019435 7.355785 3.233417 -24.970553 -6.695259 49.167317 0.000004 0.000000 0.436424 0.116E+04 lgRho_cntr log_rel_run_E_err -7.5401064992532953 rel_E_err 1.8562538071773638D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1751 0.97776451074896498 9.9379126048203007E+049 k, q, energy_removed_layers after adjustment is 1756 0.97679171286560951 9.9474195758203770E+049 Layers above q= 0.97679171286560951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9708.7675781250000 max vel inside fraction of cutoff 2623.2536669663837 max c/cs inside fraction of cutoff 3.8877834615218552 average v/vesc outside cutoff 1.9623781053912119 Kinetic plus potential energy outside cutoff 9.9474195758203770E+049 mass inside cutoff 1756 50.491512127453845 relax counter 0 log max v [km/s]= 4.3010341142028885 check gamma integral 4.8425959583877132E-002 3980 8.757095 6.192E+04 -24.470980 3.180873 51.691176 0.000000 0.000000 0.000000 0.219336 -3.329416 2718 217 -7.0758E+00 8.757036 1.613237 -17.018071 5.506488 -99.000000 51.691176 0.000000 0.044508 0.780664 0.601943 6 2.8768E+05 3.964633 7.348559 3.180873 -27.228822 -6.722398 49.167317 0.000004 0.000000 0.436424 0.117E+04 max increase log_rel_run_E_err -7.5377870201859549 rel_E_err 1.7330867640208135D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1748 0.97760235472076917 9.9462506702737652E+049 k, q, energy_removed_layers after adjustment is 1752 0.97679171286560995 9.9515887938747392E+049 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9732.0898437500000 max vel inside fraction of cutoff 2417.4726795037318 max c/cs inside fraction of cutoff 3.7472839171224717 average v/vesc outside cutoff 1.9736734364206019 Kinetic plus potential energy outside cutoff 9.9515887938747392E+049 mass inside cutoff 1752 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010345305922906 check gamma integral 4.8918328813869802E-002 3990 8.737030 6.101E+04 -24.683430 3.127161 51.691176 0.000000 0.000000 0.000000 0.219336 -3.382044 2709 217 -7.0581E+00 8.736984 1.621783 -18.547116 5.303334 -99.000000 51.691176 0.000000 0.044508 0.780664 0.603901 6 2.8768E+05 3.908708 7.339838 3.127161 -29.640484 -6.754545 49.167317 0.000004 0.000000 0.436424 0.118E+04 lgRho_cntr log_rel_run_E_err -7.5373899226748211 rel_E_err 1.5320656632130732D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1744 0.97760235472076895 9.9510358551594638E+049 k, q, energy_removed_layers after adjustment is 1748 0.97679171286560973 9.9564023725863478E+049 Layers above q= 0.97679171286560973 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9760.4628906250000 max vel inside fraction of cutoff 2203.8305939134843 max c/cs inside fraction of cutoff 3.5628228944750151 average v/vesc outside cutoff 1.9872912949359585 Kinetic plus potential energy outside cutoff 9.9564023725863478E+049 mass inside cutoff 1748 50.491512127453852 relax counter 0 log max v [km/s]= 4.3010344160422225 check gamma integral 4.9421927911156162E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 8.716887 5.988E+04 -24.903649 3.073223 51.691176 0.000000 0.000000 0.000000 0.219336 -3.434971 2709 217 -6.9438E+00 8.716858 1.632475 -20.203747 5.122582 -99.000000 51.691176 0.000000 0.044508 0.780664 0.605909 6 2.8768E+05 3.852655 7.328790 3.073223 -32.172609 -6.794377 49.167317 0.000004 0.000000 0.436424 0.119E+04 lgRho_cntr log_rel_run_E_err -7.5349705723043376 rel_E_err 1.5030235243609127D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile26.data for model 4000 save photos/4000 for model 4000 k, q, energy_removed_layers before adjustment is 1747 0.97760235472076906 9.9567773442223186E+049 k, q, energy_removed_layers after adjustment is 1751 0.97679171286560984 9.9621734309422780E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9796.7539062500000 max vel inside fraction of cutoff 1978.6760000458830 max c/cs inside fraction of cutoff 3.3828921663823670 average v/vesc outside cutoff 2.0045136957352736 Kinetic plus potential energy outside cutoff 9.9621734309422780E+049 mass inside cutoff 1751 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010352594464765 check gamma integral 4.9930331957255741E-002 4010 8.698528 5.845E+04 -25.111797 3.024044 51.691176 0.000000 0.000000 0.000000 0.219336 -3.483253 2693 217 -6.8424E+00 8.698523 1.646224 -21.942577 4.969729 -99.000000 51.691176 0.000000 0.044508 0.780664 0.607780 6 2.8768E+05 3.801665 7.314369 3.024044 -34.582657 -6.845097 49.167317 0.000004 0.000000 0.436424 0.121E+04 min_dr_div_cs log_rel_run_E_err -7.5337498130850129 rel_E_err 1.4276186929300271D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1752 0.97760235472076906 9.9637789902833930E+049 k, q, energy_removed_layers after adjustment is 1756 0.97679171286560984 9.9692046381577120E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9844.7500000000000 max vel inside fraction of cutoff 1722.2895710927037 max c/cs inside fraction of cutoff 3.1091072836094775 average v/vesc outside cutoff 2.0269701086903473 Kinetic plus potential energy outside cutoff 9.9692046381577120E+049 mass inside cutoff 1756 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010359527789523 check gamma integral 5.0407145030133264E-002 4020 8.687558 5.690E+04 -25.244639 2.994569 51.691176 0.000000 0.000000 0.000000 0.219336 -3.512114 2695 217 -6.7155E+00 8.687558 1.661447 -23.684264 4.880752 -99.000000 51.691176 0.000000 0.044508 0.780664 0.608925 6 2.8768E+05 3.771223 7.298013 2.994569 -36.076802 -6.900400 49.167317 0.000004 0.000000 0.436424 0.124E+04 min_dr_div_cs log_rel_run_E_err -7.5331505495275541 rel_E_err 1.3224719103264186D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1751 0.97760235472076917 9.9710680396099709E+049 k, q, energy_removed_layers after adjustment is 1755 0.97679171286560995 9.9765170837693600E+049 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9899.7011718750000 max vel inside fraction of cutoff 1657.1167754074133 max c/cs inside fraction of cutoff 2.9756965829384563 average v/vesc outside cutoff 2.0522531437348972 Kinetic plus potential energy outside cutoff 9.9765170837693600E+049 mass inside cutoff 1755 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010370741976649 check gamma integral 5.0716392254435916E-002 4030 8.686850 5.510E+04 -25.269302 2.992468 51.691176 0.000000 0.000000 0.000000 0.219336 -3.513981 2695 217 -6.7481E+00 8.686850 1.679508 -25.574901 4.873488 -99.000000 51.691176 0.000000 0.044508 0.780664 0.608999 6 2.8768E+05 3.769257 7.278279 2.992468 -36.186279 -6.964968 49.167317 0.000004 0.000000 0.436424 0.126E+04 min_dr_div_cs log_rel_run_E_err -7.5320051056176931 rel_E_err 1.2703360667776098D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1744 0.97735912067847475 9.9822609301076232E+049 k, q, energy_removed_layers after adjustment is 1747 0.97679171286560995 9.9845813534025099E+049 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9967.4472656250000 max vel inside fraction of cutoff 1604.7816357140591 max c/cs inside fraction of cutoff 2.9154092515485077 average v/vesc outside cutoff 2.0828274954119235 Kinetic plus potential energy outside cutoff 9.9845813534025099E+049 mass inside cutoff 1747 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010358188942552 check gamma integral 5.0795394050711762E-002 4040 8.700893 5.322E+04 -25.130775 3.029691 51.691176 0.000000 0.000000 0.000000 0.219336 -3.477260 2697 217 -6.6086E+00 8.700893 1.698918 -27.055070 4.984039 -99.000000 51.691176 0.000000 0.044508 0.780664 0.607485 6 2.8768E+05 3.808144 7.256992 3.029691 -34.301054 -7.033527 49.167317 0.000004 0.000000 0.436424 0.130E+04 min_dr_div_cs log_rel_run_E_err -7.5310400663599602 rel_E_err 1.3170487900474681D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1739 0.97735912067847475 9.9902386661747887E+049 k, q, energy_removed_layers after adjustment is 1742 0.97679171286560995 9.9925608842101902E+049 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10043.460937500000 max vel inside fraction of cutoff 1660.0446526498795 max c/cs inside fraction of cutoff 2.8449676399300143 average v/vesc outside cutoff 2.1163937107745907 Kinetic plus potential energy outside cutoff 9.9925608842101902E+049 mass inside cutoff 1742 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010369658610728 check gamma integral 5.0516347020184128E-002 4050 8.721047 5.188E+04 -24.915095 3.083281 51.691176 0.000000 0.000000 0.000000 0.219336 -3.424658 2692 217 -6.8196E+00 8.721047 1.713264 -27.012646 5.151962 -99.000000 51.691176 0.000000 0.044508 0.780664 0.605345 6 2.8768E+05 3.864010 7.241095 3.083281 -31.685401 -7.083773 49.167317 0.000004 0.000000 0.436424 0.133E+04 lgRho_cntr log_rel_run_E_err -7.5308365388223928 rel_E_err 1.3865054337883789D-12 Using fixed_vsurf 20000.000000000000 save photos/x050 for model 4050 k, q, energy_removed_layers before adjustment is 1729 0.97735912067847464 9.9957373359314424E+049 k, q, energy_removed_layers after adjustment is 1732 0.97679171286560984 9.9980569348877655E+049 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10101.863281250000 max vel inside fraction of cutoff 1623.1709523436264 max c/cs inside fraction of cutoff 2.7889459104784127 average v/vesc outside cutoff 2.1416881515310893 Kinetic plus potential energy outside cutoff 9.9980569348877655E+049 mass inside cutoff 1732 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010339750658408 check gamma integral 5.0049532391686254E-002 4060 8.740134 5.096E+04 -24.709784 3.134090 51.691176 0.000000 0.000000 0.000000 0.219336 -3.374917 2691 217 -6.9275E+00 8.740134 1.723140 -26.604811 5.325359 -99.000000 51.691176 0.000000 0.044508 0.780664 0.603362 5 2.8768E+05 3.916996 7.229934 3.134090 -29.310707 -7.118143 49.167317 0.000004 0.000000 0.436424 0.134E+04 lgRho_cntr log_rel_run_E_err -7.5227998205367905 rel_E_err 4.2576302211666518D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1727 0.97735912067847464 9.9993379268454979E+049 k, q, energy_removed_layers after adjustment is 1730 0.97679171286560984 1.0001653929008673E+050 Layers above q= 0.97679171286560984 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10143.203125000000 max vel inside fraction of cutoff 1652.8986882271665 max c/cs inside fraction of cutoff 2.7483452878549919 average v/vesc outside cutoff 2.1593446305785431 Kinetic plus potential energy outside cutoff 1.0001653929008673E+050 mass inside cutoff 1730 50.491512127453859 relax counter 0 log max v [km/s]= 4.3010329295980494 check gamma integral 4.9581964396732958E-002 4070 8.758815 5.023E+04 -24.511362 3.183851 51.691176 0.000000 0.000000 0.000000 0.219336 -3.326320 2681 217 -6.9965E+00 8.758815 1.731105 -26.192357 5.516864 -99.000000 51.691176 0.000000 0.044508 0.780664 0.601461 5 2.8768E+05 3.968925 7.220807 3.183851 -27.079856 -7.145741 49.167317 0.000004 0.000000 0.436424 0.136E+04 lgRho_cntr log_rel_run_E_err -7.5184439581328855 rel_E_err 1.9471611700876367D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1720 0.97735912067847475 1.0002135235213280E+050 k, q, energy_removed_layers after adjustment is 1723 0.97679171286560995 1.0004447323952626E+050 Layers above q= 0.97679171286560995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10177.242187500000 max vel inside fraction of cutoff 1645.3961168860760 max c/cs inside fraction of cutoff 2.7143560878933926 average v/vesc outside cutoff 2.1737320489260190 Kinetic plus potential energy outside cutoff 1.0004447323952626E+050 mass inside cutoff 1723 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010323834449240 check gamma integral 4.9109738213311230E-002 4080 8.777265 4.961E+04 -24.318634 3.233022 51.691176 0.000000 0.000000 0.000000 0.219336 -3.278416 2669 217 -7.0452E+00 8.777265 1.737968 -25.794481 5.735293 -99.000000 51.691176 0.000000 0.044508 0.780664 0.599620 5 2.8768E+05 4.020281 7.212873 3.233022 -24.963734 -7.169436 49.167317 0.000004 0.000000 0.436424 0.137E+04 lgRho_cntr log_rel_run_E_err -7.5166078254702349 rel_E_err 9.0688832970725423D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1717 0.97735912067847486 1.0004471413206782E+050 k, q, energy_removed_layers after adjustment is 1720 0.97679171286561006 1.0006779433170759E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10207.074218750000 max vel inside fraction of cutoff 1645.0544634979838 max c/cs inside fraction of cutoff 2.6841572266440239 average v/vesc outside cutoff 2.1862358662284893 Kinetic plus potential energy outside cutoff 1.0006779433170759E+050 mass inside cutoff 1720 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010320439468739 check gamma integral 4.8631534142539019E-002 4090 8.795539 4.906E+04 -24.130994 3.281745 51.691176 0.000000 0.000000 0.000000 0.219336 -3.231069 2668 217 -7.0790E+00 8.795539 1.744129 -25.392451 5.984590 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597833 5 2.8768E+05 4.071215 7.205708 3.281745 -22.949843 -7.190642 49.167317 0.000004 0.000000 0.436424 0.138E+04 lgRho_cntr log_rel_run_E_err -7.5157182948540688 rel_E_err 2.6998811516441562D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1713 0.97735912067847497 1.0006508317574080E+050 k, q, energy_removed_layers after adjustment is 1716 0.97679171286561017 1.0008812158497259E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10234.257812500000 max vel inside fraction of cutoff 1633.0727730994004 max c/cs inside fraction of cutoff 2.6563147900845125 average v/vesc outside cutoff 2.1975427731285624 Kinetic plus potential energy outside cutoff 1.0008812158497259E+050 mass inside cutoff 1716 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010318200734137 check gamma integral 4.8147304045797555E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 8.813653 4.855E+04 -23.948090 3.330066 51.691176 0.000000 0.000000 0.000000 0.219336 -3.184236 2666 217 -7.1000E+00 8.813653 1.749843 -24.759459 6.261910 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596099 5 2.8768E+05 4.121773 7.199059 3.330066 -21.030776 -7.210259 49.167317 0.000004 0.000000 0.436424 0.140E+04 lgRho_cntr log_rel_run_E_err -7.5154119130976218 rel_E_err 1.9988430948128640D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile27.data for model 4100 save photos/x100 for model 4100 k, q, energy_removed_layers before adjustment is 1709 0.97735912067847508 1.0008353799315678E+050 k, q, energy_removed_layers after adjustment is 1712 0.97679171286561028 1.0010653333115315E+050 Layers above q= 0.97679171286561028 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10259.820312500000 max vel inside fraction of cutoff 1655.9304262191270 max c/cs inside fraction of cutoff 2.6298598161322762 average v/vesc outside cutoff 2.2081050021150301 Kinetic plus potential energy outside cutoff 1.0010653333115315E+050 mass inside cutoff 1712 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010316737299528 check gamma integral 4.7657018601221832E-002 4110 8.831603 4.807E+04 -23.770008 3.377973 51.691176 0.000000 0.000000 0.000000 0.219336 -3.137934 2662 217 -7.1076E+00 8.831603 1.755308 -23.353348 6.558893 -99.000000 51.691176 0.000000 0.044508 0.780664 0.594415 5 2.8768E+05 4.171938 7.192696 3.377973 -19.202058 -7.228978 49.167317 0.000004 0.000000 0.436424 0.141E+04 lgRho_cntr log_rel_run_E_err -7.5150138375176772 rel_E_err 3.0968512394007540D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1707 0.97735912067847508 1.0010077415469687E+050 k, q, energy_removed_layers after adjustment is 1710 0.97679171286561028 1.0012372453220711E+050 Layers above q= 0.97679171286561028 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10284.578125000000 max vel inside fraction of cutoff 1634.1454343370947 max c/cs inside fraction of cutoff 2.6039807786644777 average v/vesc outside cutoff 2.2182724445916278 Kinetic plus potential energy outside cutoff 1.0012372453220711E+050 mass inside cutoff 1710 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010315889297779 check gamma integral 4.7160914235551632E-002 4120 8.852236 4.752E+04 -23.569673 3.434541 51.691176 0.000000 0.000000 0.000000 0.219336 -3.084878 2665 217 -6.9391E+00 8.852236 1.761628 -21.372229 6.915707 -99.000000 51.691176 0.000000 0.044508 0.780664 0.592518 5 2.8768E+05 4.229673 7.185304 3.434541 -17.185754 -7.250577 49.167317 0.000004 0.000000 0.436424 0.142E+04 lgRho_cntr log_rel_run_E_err -7.5145546570208293 rel_E_err 3.6839953087670811D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1707 0.97735912067847497 1.0012017296174565E+050 k, q, energy_removed_layers after adjustment is 1710 0.97679171286561017 1.0014306691350612E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10313.601562500000 max vel inside fraction of cutoff 1655.1254950759587 max c/cs inside fraction of cutoff 2.5733371794646724 average v/vesc outside cutoff 2.2301081798127758 Kinetic plus potential energy outside cutoff 1.0014306691350612E+050 mass inside cutoff 1710 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010322341570593 check gamma integral 4.6575621256846354E-002 4130 8.872192 4.694E+04 -23.380432 3.493827 51.691176 0.000000 0.000000 0.000000 0.219336 -3.033681 2664 217 -6.9509E+00 8.872192 1.768301 -19.416127 7.265956 -99.000000 51.691176 0.000000 0.044508 0.780664 0.590734 5 2.8768E+05 4.285610 7.177451 3.493827 -15.318774 -7.273342 49.167317 0.000004 0.000000 0.436424 0.143E+04 max increase log_rel_run_E_err -7.5140321973662534 rel_E_err 6.4615583014656170D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1705 0.97735912067847497 1.0014013048818556E+050 k, q, energy_removed_layers after adjustment is 1708 0.97679171286561017 1.0016295990412050E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10344.708984375000 max vel inside fraction of cutoff 1649.5413422411234 max c/cs inside fraction of cutoff 2.5401298618890826 average v/vesc outside cutoff 2.2427039528603907 Kinetic plus potential energy outside cutoff 1.0016295990412050E+050 mass inside cutoff 1708 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010320862924480 check gamma integral 4.5991179092335993E-002 4140 8.891434 4.617E+04 -23.199544 3.550127 51.691176 0.000000 0.000000 0.000000 0.219336 -2.984410 2664 217 -6.7233E+00 8.891434 1.777313 -17.283865 7.602132 -99.000000 51.691176 0.000000 0.044508 0.780664 0.589063 5 2.8768E+05 4.339645 7.166761 3.550127 -13.590556 -7.304039 49.167317 0.000004 0.000000 0.436424 0.145E+04 lgRho_cntr log_rel_run_E_err -7.5114645629077765 rel_E_err 6.1296932501197829D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1700 0.97735912067847486 1.0016618172977705E+050 k, q, energy_removed_layers after adjustment is 1703 0.97679171286561006 1.0018891626641592E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10387.490234375000 max vel inside fraction of cutoff 1791.7860438082487 max c/cs inside fraction of cutoff 2.4938542267537507 average v/vesc outside cutoff 2.2598746463251627 Kinetic plus potential energy outside cutoff 1.0018891626641592E+050 mass inside cutoff 1703 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010332855043618 check gamma integral 4.5395212257519732E-002 4150 8.886768 4.471E+04 -23.232281 3.536749 51.691176 0.000000 0.000000 0.000000 0.219336 -2.996555 2669 217 -6.6202E+00 8.886768 1.794783 -15.575504 7.525211 -99.000000 51.691176 0.000000 0.044508 0.780664 0.589424 5 2.8768E+05 4.326444 7.145834 3.536749 -13.986931 -7.363422 49.167317 0.000004 0.000000 0.436424 0.149E+04 lgRho_cntr log_rel_run_E_err -7.5084597575713934 rel_E_err 6.6909010042195299D-11 Using fixed_vsurf 20000.000000000000 save photos/x150 for model 4150 k, q, energy_removed_layers before adjustment is 1690 0.97735912067847486 1.0021371141084942E+050 k, q, energy_removed_layers after adjustment is 1693 0.97679171286561006 1.0023623873757257E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10472.994140625000 max vel inside fraction of cutoff 1975.8408404408735 max c/cs inside fraction of cutoff 2.3992995842150426 average v/vesc outside cutoff 2.2936838756419875 Kinetic plus potential energy outside cutoff 1.0023623873757257E+050 mass inside cutoff 1693 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010337078749696 check gamma integral 4.5465808921047082E-002 4160 8.866032 4.396E+04 -23.421016 3.476251 51.691176 0.000000 0.000000 0.000000 0.219336 -3.050191 2674 217 -6.9471E+00 8.866024 1.803875 -16.101779 7.165008 -99.000000 51.691176 0.000000 0.044508 0.780664 0.591144 5 2.8768E+05 4.268012 7.134836 3.476251 -15.858312 -7.394287 49.167317 0.000004 0.000000 0.436424 0.152E+04 lgRho_cntr log_rel_run_E_err -7.5069983941489298 rel_E_err 4.6103905638024068D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1688 0.97711588663618054 1.0024951090041501E+050 k, q, energy_removed_layers after adjustment is 1690 0.97679171286561017 1.0025956559577990E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10518.869140625000 max vel inside fraction of cutoff 2002.6812865748966 max c/cs inside fraction of cutoff 2.3475563981654637 average v/vesc outside cutoff 2.3115495685732554 Kinetic plus potential energy outside cutoff 1.0025956559577990E+050 mass inside cutoff 1690 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010316870265655 check gamma integral 4.6045456537538006E-002 4170 8.847698 4.345E+04 -23.592724 3.421632 51.691176 0.000000 0.000000 0.000000 0.219336 -3.097697 2674 217 -7.0109E+00 8.847682 1.810184 -16.939131 6.844903 -99.000000 51.691176 0.000000 0.044508 0.780664 0.592715 5 2.8768E+05 4.216441 7.127130 3.421632 -17.587523 -7.415618 49.167317 0.000004 0.000000 0.436424 0.153E+04 lgRho_cntr log_rel_run_E_err -7.5062798939330513 rel_E_err 6.0373187475559883D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1686 0.97711588663618043 1.0026526094898163E+050 k, q, energy_removed_layers after adjustment is 1688 0.97679171286561006 1.0027525638720252E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10551.273437500000 max vel inside fraction of cutoff 1921.8209485964196 max c/cs inside fraction of cutoff 2.3105941555572618 average v/vesc outside cutoff 2.3240600262016535 Kinetic plus potential energy outside cutoff 1.0027525638720252E+050 mass inside cutoff 1688 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010314056945909 check gamma integral 4.6552918265317579E-002 4180 8.828681 4.296E+04 -23.774735 3.370473 51.691176 0.000000 0.000000 0.000000 0.219336 -3.147090 2673 217 -6.8645E+00 8.828660 1.816333 -18.055920 6.518611 -99.000000 51.691176 0.000000 0.044508 0.780664 0.594382 5 2.8768E+05 4.163035 7.119577 3.370473 -19.456706 -7.436366 49.167317 0.000004 0.000000 0.436424 0.155E+04 lgRho_cntr log_rel_run_E_err -7.5052036014032275 rel_E_err 2.0202486627218210D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1685 0.97711588663618054 1.0028021153209047E+050 k, q, energy_removed_layers after adjustment is 1687 0.97679171286561017 1.0029014716154042E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10583.316406250000 max vel inside fraction of cutoff 1726.9309031884143 max c/cs inside fraction of cutoff 2.2737020094165254 average v/vesc outside cutoff 2.3363449539174344 Kinetic plus potential energy outside cutoff 1.0029014716154042E+050 mass inside cutoff 1687 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010318859598309 check gamma integral 4.7072952240896519E-002 4190 8.808682 4.244E+04 -23.969941 3.316950 51.691176 0.000000 0.000000 0.000000 0.219336 -3.199163 2676 217 -6.9829E+00 8.808661 1.822901 -19.446629 6.192477 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596174 5 2.8768E+05 4.106962 7.111485 3.316950 -21.508696 -7.458489 49.167317 0.000004 0.000000 0.436424 0.156E+04 lgRho_cntr log_rel_run_E_err -7.5040555074002366 rel_E_err 3.5332027733019383D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1684 0.97711588663618054 1.0029575055358116E+050 k, q, energy_removed_layers after adjustment is 1686 0.97679171286561017 1.0030562023482554E+050 Layers above q= 0.97679171286561017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10618.039062500000 max vel inside fraction of cutoff 1637.5938672048705 max c/cs inside fraction of cutoff 2.2333438381921824 average v/vesc outside cutoff 2.3495639393624415 Kinetic plus potential energy outside cutoff 1.0030562023482554E+050 mass inside cutoff 1686 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010313880391084 check gamma integral 4.7614875381414803E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4200 8.788477 4.187E+04 -24.171432 3.262862 51.691176 0.000000 0.000000 0.000000 0.219336 -3.251904 2677 217 -6.7978E+00 8.788459 1.830118 -21.078345 5.893138 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598028 5 2.8768E+05 4.050400 7.102561 3.262862 -23.676068 -7.482783 49.167317 0.000004 0.000000 0.436424 0.158E+04 lgRho_cntr log_rel_run_E_err -7.5027613933271411 rel_E_err 2.2747741403943028D-11 Using fixed_vsurf 20000.000000000000 save LOGS/profile28.data for model 4200 save photos/x200 for model 4200 k, q, energy_removed_layers before adjustment is 1685 0.97711588663618065 1.0031222310907620E+050 k, q, energy_removed_layers after adjustment is 1687 0.97679171286561028 1.0032201795164250E+050 Layers above q= 0.97679171286561028 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10656.808593750000 max vel inside fraction of cutoff 1636.2462107011879 max c/cs inside fraction of cutoff 2.1878303803763233 average v/vesc outside cutoff 2.3642024932220354 Kinetic plus potential energy outside cutoff 1.0032201795164250E+050 mass inside cutoff 1687 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010320189851514 check gamma integral 4.8159503387503563E-002 4210 8.768148 4.120E+04 -24.380508 3.208428 51.691176 0.000000 0.000000 0.000000 0.219336 -3.305087 2677 217 -6.7057E+00 8.768139 1.838740 -22.914476 5.631075 -99.000000 51.691176 0.000000 0.044508 0.780664 0.599935 5 2.8768E+05 3.993587 7.091871 3.208428 -25.956990 -7.511838 49.167317 0.000004 0.000000 0.436424 0.160E+04 lgRho_cntr log_rel_run_E_err -7.5010643665332433 rel_E_err 2.4012491271294720D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1683 0.97711588663618043 1.0033082299969702E+050 k, q, energy_removed_layers after adjustment is 1685 0.97679171286561006 1.0034052544002919E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10703.974609375000 max vel inside fraction of cutoff 1636.5886492670049 max c/cs inside fraction of cutoff 2.1318224049535557 average v/vesc outside cutoff 2.3818332959245097 Kinetic plus potential energy outside cutoff 1.0034052544002919E+050 mass inside cutoff 1685 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010323588148340 check gamma integral 4.8708462007229524E-002 4220 8.748709 4.033E+04 -24.587350 3.156342 51.691176 0.000000 0.000000 0.000000 0.219336 -3.356043 2672 217 -6.6145E+00 8.748709 1.850223 -24.810085 5.416472 -99.000000 51.691176 0.000000 0.044508 0.780664 0.601801 5 2.8768E+05 3.939345 7.077633 3.156342 -28.237916 -7.550842 49.167317 0.000004 0.000000 0.436424 0.163E+04 lgRho_cntr log_rel_run_E_err -7.4980354332819816 rel_E_err 2.6276402508423926D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1687 0.97711588663618065 1.0035504536906184E+050 k, q, energy_removed_layers after adjustment is 1689 0.97679171286561028 1.0036462011848058E+050 Layers above q= 0.97679171286561028 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10768.267578125000 max vel inside fraction of cutoff 1636.0993135344222 max c/cs inside fraction of cutoff 2.0543724509450216 average v/vesc outside cutoff 2.4056198421829542 Kinetic plus potential energy outside cutoff 1.0036462011848058E+050 mass inside cutoff 1689 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010327018843899 check gamma integral 4.9241431758440188E-002 4230 8.740726 3.836E+04 -24.683182 3.134694 51.691176 0.000000 0.000000 0.000000 0.219336 -3.377067 2645 217 -6.0187E+00 8.740726 1.877211 -26.510983 5.335272 -99.000000 51.691176 0.000000 0.044508 0.780664 0.602568 6 2.8768E+05 3.917055 7.044434 3.134694 -29.216531 -7.645210 49.167317 0.000004 0.000000 0.436424 0.170E+04 max increase log_rel_run_E_err -7.4905240245350031 rel_E_err 1.4403997956859430D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1678 0.97711588663618043 1.0040713521687549E+050 k, q, energy_removed_layers after adjustment is 1680 0.97679171286561006 1.0041639319190633E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10926.234375000000 max vel inside fraction of cutoff 1625.0878213904916 max c/cs inside fraction of cutoff 1.9754651923614792 average v/vesc outside cutoff 2.4628645342894262 Kinetic plus potential energy outside cutoff 1.0041639319190633E+050 mass inside cutoff 1680 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010385010011705 check gamma integral 4.9517689585174801E-002 4240 8.776416 3.662E+04 -24.313631 3.229536 51.691176 0.000000 0.000000 0.000000 0.219336 -3.284703 2623 217 -6.7017E+00 8.776416 1.902484 -25.762715 5.728704 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598897 5 2.8768E+05 4.016165 7.014317 3.229536 -25.044205 -7.740387 49.167317 0.000004 0.000000 0.436424 0.175E+04 lgRho_cntr log_rel_run_E_err -7.4879391709249630 rel_E_err 1.5423981969403903D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1671 0.97711588663618043 1.0045043714138306E+050 k, q, energy_removed_layers after adjustment is 1673 0.97679171286561006 1.0045938348670951E+050 Layers above q= 0.97679171286561006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11083.332031250000 max vel inside fraction of cutoff 1584.7535073691756 max c/cs inside fraction of cutoff 2.1926055825024426 average v/vesc outside cutoff 2.5181573410773113 Kinetic plus potential energy outside cutoff 1.0045938348670951E+050 mass inside cutoff 1673 50.491512127453873 relax counter 0 log max v [km/s]= 4.3010316367728825 check gamma integral 4.8625157180348627E-002 4250 8.795093 3.606E+04 -24.123058 3.279349 51.691176 0.000000 0.000000 0.000000 0.219336 -3.236284 2621 217 -6.7924E+00 8.795093 1.910899 -25.237865 5.982624 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597078 5 2.8768E+05 4.068230 7.004526 3.279349 -22.983993 -7.774210 49.167317 0.000004 0.000000 0.436424 0.176E+04 lgRho_cntr log_rel_run_E_err -7.4877209151068316 rel_E_err 1.6485955331748306D-12 Using fixed_vsurf 20000.000000000000 save photos/x250 for model 4250 k, q, energy_removed_layers before adjustment is 1668 0.97711588663618065 1.0046354902027628E+050 k, q, energy_removed_layers after adjustment is 1670 0.97679171286561028 1.0047238864182961E+050 Layers above q= 0.97679171286561028 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11137.701171875000 max vel inside fraction of cutoff 1594.9374467454318 max c/cs inside fraction of cutoff 2.3217450868000649 average v/vesc outside cutoff 2.5369152985456980 Kinetic plus potential energy outside cutoff 1.0047238864182961E+050 mass inside cutoff 1670 50.491512127453881 relax counter 0 log max v [km/s]= 4.3010312770345802 check gamma integral 4.8131958566743120E-002 4260 8.814541 3.553E+04 -23.927935 3.331259 51.691176 0.000000 0.000000 0.000000 0.219336 -3.185996 2621 217 -6.7262E+00 8.814541 1.919053 -23.994268 6.281080 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595220 5 2.8768E+05 4.122515 6.995227 3.331259 -20.924777 -7.808099 49.167317 0.000004 0.000000 0.436424 0.177E+04 lgRho_cntr log_rel_run_E_err -7.4874913401869003 rel_E_err 1.8375463459481276D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1665 0.97711588663618076 1.0047624174493909E+050 k, q, energy_removed_layers after adjustment is 1667 0.97679171286561040 1.0048497679133478E+050 Layers above q= 0.97679171286561040 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11191.396484375000 max vel inside fraction of cutoff 1589.4174910571089 max c/cs inside fraction of cutoff 2.3380998298928080 average v/vesc outside cutoff 2.5552839119540560 Kinetic plus potential energy outside cutoff 1.0048497679133478E+050 mass inside cutoff 1667 50.491512127453888 relax counter 0 log max v [km/s]= 4.3010314250843305 check gamma integral 4.7603794646744829E-002 4270 8.834600 3.494E+04 -23.729677 3.384866 51.691176 0.000000 0.000000 0.000000 0.219336 -3.134266 2621 217 -6.5813E+00 8.834600 1.928368 -21.985398 6.615519 -99.000000 51.691176 0.000000 0.044508 0.780664 0.593347 5 2.8768E+05 4.178584 6.984855 3.384866 -18.888576 -7.848144 49.167317 0.000004 0.000000 0.436424 0.178E+04 lgRho_cntr log_rel_run_E_err -7.4872447497464778 rel_E_err 1.8548669753602707D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1661 0.97711588663618087 1.0048976621539036E+050 k, q, energy_removed_layers after adjustment is 1663 0.97679171286561051 1.0049838060006331E+050 Layers above q= 0.97679171286561051 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11253.988281250000 max vel inside fraction of cutoff 1592.8906575066087 max c/cs inside fraction of cutoff 2.4062497393844948 average v/vesc outside cutoff 2.5764758520175746 Kinetic plus potential energy outside cutoff 1.0049838060006331E+050 mass inside cutoff 1663 50.491512127453902 relax counter 0 log max v [km/s]= 4.3010318904379501 check gamma integral 4.7041579006838474E-002 4280 8.846926 3.387E+04 -23.605218 3.418149 51.691176 0.000000 0.000000 0.000000 0.219336 -3.102537 2625 217 -6.1461E+00 8.846926 1.946008 -19.666796 6.830466 -99.000000 51.691176 0.000000 0.044508 0.780664 0.592219 5 2.8768E+05 4.213085 6.966005 3.418149 -17.673366 -7.928030 49.167317 0.000004 0.000000 0.436424 0.180E+04 max increase log_rel_run_E_err -7.4867578156271888 rel_E_err 8.6775673313194674D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1656 0.97711588663618165 1.0051386251621125E+050 k, q, energy_removed_layers after adjustment is 1658 0.97679171286561128 1.0052224599586016E+050 Layers above q= 0.97679171286561128 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11376.257812500000 max vel inside fraction of cutoff 1604.5509759690126 max c/cs inside fraction of cutoff 2.4840746273603829 average v/vesc outside cutoff 2.6172728487289603 Kinetic plus potential energy outside cutoff 1.0052224599586016E+050 mass inside cutoff 1658 50.491512127453937 relax counter 0 log max v [km/s]= 4.3010345849728209 check gamma integral 4.6661997968996130E-002 4290 8.812131 3.256E+04 -23.936900 3.324870 51.691176 0.000000 0.000000 0.000000 0.219336 -3.193441 2634 217 -6.6409E+00 8.812131 1.968799 -21.255436 6.247416 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595209 5 2.8768E+05 4.115260 6.943038 3.324870 -21.154343 -8.037064 49.167317 0.000004 0.000000 0.436424 0.181E+04 lgRho_cntr log_rel_run_E_err -7.4860881748398302 rel_E_err 1.7595183004043774D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1654 0.97711588663618165 1.0054263746147429E+050 k, q, energy_removed_layers after adjustment is 1656 0.97679171286561128 1.0055072027399727E+050 Layers above q= 0.97679171286561128 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11541.773437500000 max vel inside fraction of cutoff 1603.4784479095188 max c/cs inside fraction of cutoff 2.5750948854550728 average v/vesc outside cutoff 2.6713019026857538 Kinetic plus potential energy outside cutoff 1.0055072027399727E+050 mass inside cutoff 1656 50.491512127453937 relax counter 0 log max v [km/s]= 4.3010313660292416 check gamma integral 4.7602167934541154E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4300 8.791961 3.196E+04 -24.138216 3.270863 51.691176 0.000000 0.000000 0.000000 0.219336 -3.246098 2630 217 -6.4624E+00 8.791961 1.979760 -22.913649 5.942436 -99.000000 51.691176 0.000000 0.044508 0.780664 0.597045 5 2.8768E+05 4.058764 6.932566 3.270863 -23.301894 -8.092256 49.167317 0.000004 0.000000 0.436424 0.182E+04 lgRho_cntr log_rel_run_E_err -7.4858444589234976 rel_E_err 2.2527158896630108D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile29.data for model 4300 save photos/x300 for model 4300 k, q, energy_removed_layers before adjustment is 1647 0.97711588663618143 1.0055532739990830E+050 k, q, energy_removed_layers after adjustment is 1649 0.97679171286561106 1.0056326449144699E+050 Layers above q= 0.97679171286561106 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11624.519531250000 max vel inside fraction of cutoff 1580.1442389143765 max c/cs inside fraction of cutoff 2.5993224935651207 average v/vesc outside cutoff 2.6977929608833260 Kinetic plus potential energy outside cutoff 1.0056326449144699E+050 mass inside cutoff 1649 50.491512127453930 relax counter 0 log max v [km/s]= 4.3010319389498797 check gamma integral 4.8159582242977457E-002 4310 8.773584 3.112E+04 -24.327903 3.221597 51.691176 0.000000 0.000000 0.000000 0.219336 -3.294169 2629 217 -6.2539E+00 8.773584 1.995523 -24.939343 5.696919 -99.000000 51.691176 0.000000 0.044508 0.780664 0.598759 5 2.8768E+05 4.007368 6.917814 3.221597 -25.346952 -8.173130 49.167317 0.000004 0.000000 0.436424 0.182E+04 max increase log_rel_run_E_err -7.4854558881507254 rel_E_err 5.7965981531732202D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1646 0.97711588663618132 1.0057200431446441E+050 k, q, energy_removed_layers after adjustment is 1648 0.97679171286561095 1.0057973520827503E+050 Layers above q= 0.97679171286561095 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11747.236328125000 max vel inside fraction of cutoff 1552.3631834308590 max c/cs inside fraction of cutoff 2.6164964592517284 average v/vesc outside cutoff 2.7365014098726501 Kinetic plus potential energy outside cutoff 1.0057973520827503E+050 mass inside cutoff 1648 50.491512127453916 relax counter 0 log max v [km/s]= 4.3010328429253821 check gamma integral 4.8681792625497558E-002 4320 8.796713 2.921E+04 -24.097957 3.283050 51.691176 0.000000 0.000000 0.000000 0.219336 -3.234531 2605 217 -6.2184E+00 8.796713 2.033393 -24.769215 6.009127 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596442 5 2.8768E+05 4.071701 6.883390 3.283050 -22.800300 -8.374866 49.167317 0.000004 0.000000 0.436424 0.180E+04 lgRho_cntr log_rel_run_E_err -7.4833571348671519 rel_E_err 2.0331482114091893D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1671 0.96877769788161128 9.9166366202503920E+049 k, q, energy_removed_layers after adjustment is 1713 0.95480250534850919 1.0367809188492032E+050 Layers above q= 0.95480250534850919 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12060.923828125000 max vel inside fraction of cutoff 1185.4319565389967 max c/cs inside fraction of cutoff 1.3386207535163872 average v/vesc outside cutoff 1.8468652587599383 Kinetic plus potential energy outside cutoff 1.0367809188492032E+050 mass inside cutoff 1713 49.354864136485965 relax counter 0 log max v [km/s]= 4.3010323460245754 check gamma integral 4.8111065381553068E-002 4330 8.815625 2.832E+04 -23.907600 3.333623 51.691176 0.000000 0.000000 0.000000 0.219336 -3.185614 2594 217 -6.1503E+00 8.815625 2.051640 -22.953950 6.302039 -99.000000 51.691176 0.000000 0.044508 0.780664 0.594645 5 2.8768E+05 4.124506 6.866299 3.333623 -20.802172 -8.473317 49.167317 0.000004 0.000000 0.436424 0.177E+04 max increase log_rel_run_E_err -7.4830973362291724 rel_E_err 2.7803796154168247D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1660 0.96844792171975547 1.0032019803785284E+050 k, q, energy_removed_layers after adjustment is 1700 0.95513753579975780 1.0435977724295896E+050 Layers above q= 0.95513753579975780 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12222.117187500000 max vel inside fraction of cutoff 1181.0974033746404 max c/cs inside fraction of cutoff 1.4946252653329704 average v/vesc outside cutoff 1.8895924771798014 Kinetic plus potential energy outside cutoff 1.0435977724295896E+050 mass inside cutoff 1700 49.372182254432175 relax counter 0 log max v [km/s]= 4.3010323091250457 check gamma integral 4.7590119257430258E-002 4340 8.797899 2.655E+04 -24.079579 3.286289 51.691176 0.000000 0.000000 0.000000 0.219336 -3.231999 2576 217 -6.1372E+00 8.797899 2.089342 -23.550357 6.028426 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596222 5 2.8768E+05 4.074780 6.829364 3.286289 -22.664499 -8.678441 49.167317 0.000004 0.000000 0.436424 0.167E+04 lgRho_cntr log_rel_run_E_err -7.4821206440856134 rel_E_err 2.0114538197344171D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1644 0.96778836939604274 1.0238017667516332E+050 k, q, energy_removed_layers after adjustment is 1675 0.95765338771255637 1.0551473376622372E+050 Layers above q= 0.95765338771255637 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12577.427734375000 max vel inside fraction of cutoff 1195.1045354380981 max c/cs inside fraction of cutoff 1.6223156203844638 average v/vesc outside cutoff 2.0370833693057699 Kinetic plus potential energy outside cutoff 1.0551473376622372E+050 mass inside cutoff 1675 49.502229597886064 relax counter 0 log max v [km/s]= 4.3010315687388436 check gamma integral 4.8072289718269400E-002 4350 8.800631 2.436E+04 -24.054631 3.293549 51.691176 0.000000 0.000000 0.000000 0.219336 -3.225096 2554 217 -5.6781E+00 8.800631 2.138682 -24.047417 6.068517 -99.000000 51.691176 0.000000 0.044508 0.780664 0.595927 5 2.8768E+05 4.082332 6.778638 3.293549 -22.375634 -8.938205 49.167317 0.000004 0.000000 0.436424 0.154E+04 lgRho_cntr log_rel_run_E_err -7.4811789709552041 rel_E_err 1.1378701705946550D-11 Using fixed_vsurf 20000.000000000000 save photos/x350 for model 4350 k, q, energy_removed_layers before adjustment is 1624 0.96671625429279240 1.0454876191595439E+050 k, q, energy_removed_layers after adjustment is 1651 0.95798865478283368 1.0675526927931601E+050 Layers above q= 0.95798865478283368 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13091.527343750000 max vel inside fraction of cutoff 1142.0812387381952 max c/cs inside fraction of cutoff 1.6954538615336525 average v/vesc outside cutoff 2.1486404365427307 Kinetic plus potential energy outside cutoff 1.0675526927931601E+050 mass inside cutoff 1651 49.519559946948071 relax counter 0 log max v [km/s]= 4.3010322848045774 check gamma integral 4.8037986219794084E-002 4360 8.799254 2.036E+04 -24.067874 3.290191 51.691176 0.000000 0.000000 0.000000 0.219336 -3.228721 2582 217 -5.1676E+00 8.799254 2.246407 -24.085715 6.048145 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596047 6 2.8768E+05 4.078463 6.682956 3.290191 -22.521756 -9.438444 49.167317 0.000004 0.000000 0.436424 0.143E+04 varcontrol log_rel_run_E_err -7.4807414823732632 rel_E_err 1.6454493046273847D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1626 0.96531093725551698 1.0731727055434427E+050 k, q, energy_removed_layers after adjustment is 1684 0.94582640485685832 1.1343085412884677E+050 Layers above q= 0.94582640485685832 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14439.191406250000 max vel inside fraction of cutoff 677.76927078105700 max c/cs inside fraction of cutoff 0.98407970089843921 average v/vesc outside cutoff 2.0397212014544857 Kinetic plus potential energy outside cutoff 1.1343085412884677E+050 mass inside cutoff 1684 48.890878948178177 relax counter 0 log max v [km/s]= 4.3010305964069229 check gamma integral 4.8116767377643394E-002 4370 8.798864 1.696E+04 -24.072002 3.289609 51.691176 0.000000 0.000000 0.000000 0.219336 -3.229736 2576 217 -5.1488E+00 8.798864 2.366840 -24.192416 6.042332 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596083 6 2.8768E+05 4.077373 6.606532 3.289609 -22.563545 -9.933804 49.167317 0.000004 0.000000 0.436424 0.122E+04 varcontrol log_rel_run_E_err -7.4805204506497933 rel_E_err 1.7418500595659887D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1600 0.95698383276314691 1.1365858011687339E+050 k, q, energy_removed_layers after adjustment is 1633 0.94582640485685776 1.1563837789515970E+050 Layers above q= 0.94582640485685776 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -16399.695312500000 max vel inside fraction of cutoff 537.30286897725409 max c/cs inside fraction of cutoff 0.91084524614316698 average v/vesc outside cutoff 2.2996337054281568 Kinetic plus potential energy outside cutoff 1.1563837789515970E+050 mass inside cutoff 1633 48.890878948178148 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8164893634582970E-002 4380 8.798668 1.384E+04 -24.074136 3.289854 51.691176 0.000000 0.000000 0.000000 0.219336 -3.230246 2577 217 -4.8877E+00 8.798668 2.515254 -24.262639 6.039404 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596102 6 2.8768E+05 4.076823 6.549535 3.289854 -22.584617 -10.593081 49.167317 0.000004 0.000000 0.436424 0.915E+03 min_dr_div_cs log_rel_run_E_err -7.4802967822264383 rel_E_err 1.6465004958991529D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1563 0.95513753579975702 1.1614878042691685E+050 k, q, energy_removed_layers after adjustment is 1591 0.94582640485685820 1.1751024786157907E+050 Layers above q= 0.94582640485685820 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -19697.615234375000 max vel inside fraction of cutoff 425.11505718387542 max c/cs inside fraction of cutoff 0.83927052765050447 average v/vesc outside cutoff 2.6716995998529005 Kinetic plus potential energy outside cutoff 1.1751024786157907E+050 mass inside cutoff 1591 48.890878948178177 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8201951473910487E-002 retry: eos evaluated at too low a density 4385 4390 8.798543 1.244E+04 -24.075492 3.290686 51.691176 0.000000 0.000000 0.000000 0.219336 -3.230571 2572 218 -4.6561E+00 8.798543 2.673899 -24.306837 6.037546 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596114 6 2.8768E+05 4.076474 6.681412 3.290686 -22.598016 -11.092798 49.167317 0.000004 0.000000 0.436424 0.644E+03 varcontrol log_rel_run_E_err -7.4800401046688778 rel_E_err 1.7712433467489845D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1561 0.95261061390096413 1.1793651079716849E+050 k, q, energy_removed_layers after adjustment is 1579 0.94650690349748745 1.1854485174291172E+050 Layers above q= 0.94650690349748745 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -24721.312500000000 max vel inside fraction of cutoff 336.51399215722154 max c/cs inside fraction of cutoff 0.77467072695639050 average v/vesc outside cutoff 3.1705123972054583 Kinetic plus potential energy outside cutoff 1.1854485174291172E+050 mass inside cutoff 1579 48.926054723027086 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8227263916936762E-002 retry: logRho > hydro_mtx_max_allowed_logRho 1 4391 retry: eos evaluated at too low a density 4397 max_abs_correction > tol_max_correction*coeff 4397 4.0447607526997394D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4397 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4400 8.798498 1.124E+04 -24.075982 3.291688 51.691176 0.000000 0.000000 0.000000 0.219336 -3.230689 2572 221 -4.9003E+00 8.798498 2.786689 -24.322845 6.036870 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596118 5 2.8768E+05 4.076347 6.731676 3.291688 -22.602894 -16.148060 49.167317 0.000004 0.000000 0.436424 0.230E+01 max increase log_rel_run_E_err -7.4797981745495861 rel_E_err 1.6690695771940992D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile30.data for model 4400 save photos/x400 for model 4400 k, q, energy_removed_layers before adjustment is 1563 0.95168173878728879 1.1855780627913502E+050 k, q, energy_removed_layers after adjustment is 1578 0.94684768580160716 1.1897310791778492E+050 Layers above q= 0.94684768580160716 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -29589.634765625000 max vel inside fraction of cutoff 253.09641150493346 max c/cs inside fraction of cutoff 0.64314204012262854 average v/vesc outside cutoff 3.5794900447439426 Kinetic plus potential energy outside cutoff 1.1897310791778492E+050 mass inside cutoff 1578 48.943670161011099 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8237767107578385E-002 4410 8.798480 8992.403 -24.076166 3.294125 51.691176 0.000000 0.000000 0.000000 0.219336 -3.230736 2476 221 -4.2649E+00 8.798480 2.966137 -24.329176 6.036602 -99.000000 51.691176 0.000000 0.044508 0.780664 0.596119 5 2.8768E+05 4.076297 6.702471 3.294125 -22.604829 -19.110369 49.167317 0.000004 0.000000 0.436424 0.119E+00 varcontrol log_rel_run_E_err -7.4795382202180161 rel_E_err 3.1502402762396403D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1368 0.95058342115166083 1.1917217471731849E+050 k, q, energy_removed_layers after adjustment is 1378 0.94710409203491752 1.1936734399001382E+050 Layers above q= 0.94710409203491752 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -40479.617187500000 max vel inside fraction of cutoff 124.28351362203101 max c/cs inside fraction of cutoff 0.37760086799043735 average v/vesc outside cutoff 4.3360692231014228 Kinetic plus potential energy outside cutoff 1.1936734399001382E+050 mass inside cutoff 1378 48.956924100687523 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8242771492920208E-002 4420 8.798522 6680.449 -24.075718 3.299307 51.691176 0.000000 0.000000 0.000000 0.219335 -3.230626 2497 221 -4.0630E+00 8.798522 3.197752 -24.314363 6.037234 -99.000000 51.691176 0.000000 0.044508 0.780665 0.596116 5 2.8768E+05 4.076415 6.649421 3.299307 -22.600285 -20.919214 49.160758 0.000004 0.000000 0.436424 0.268E-01 varcontrol log_rel_run_E_err -7.4793028947110729 rel_E_err 1.7490244626773029D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1377 0.94956565854375419 1.1956847609625749E+050 k, q, energy_removed_layers after adjustment is 1381 0.94761421216516639 1.1961774634871724E+050 Layers above q= 0.94761421216516639 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -63149.660156250000 max vel inside fraction of cutoff 73.610235452203838 max c/cs inside fraction of cutoff 0.24079314424173273 average v/vesc outside cutoff 5.6093790765325515 Kinetic plus potential energy outside cutoff 1.1961774634871724E+050 mass inside cutoff 1381 48.983292810007711 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8237524393671571E-002 4430 8.798601 4528.142 -24.074868 3.307279 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230421 2578 221 -3.8649E+00 8.798601 3.416828 -24.286550 6.038409 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596108 6 2.8768E+05 4.076636 6.412029 3.307279 -22.591838 -22.031221 49.153012 0.000004 0.000000 0.436424 0.162E-01 varcontrol log_rel_run_E_err -7.4790783114539670 rel_E_err 1.6323299655359513D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1358 0.94888685583244980 1.1966420918569662E+050 k, q, energy_removed_layers after adjustment is 1361 0.94761421216516495 1.1968449273238071E+050 Layers above q= 0.94761421216516495 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -99131.705078125000 max vel inside fraction of cutoff 59.082687040234617 max c/cs inside fraction of cutoff 0.16155994292232514 average v/vesc outside cutoff 7.1189199814819357 Kinetic plus potential energy outside cutoff 1.1968449273238071E+050 mass inside cutoff 1361 48.983292810007626 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8227766184901502E-002 retry: adjust_correction failed in eval_equations -- give up in solver 4431 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1168 4434 retry: adjust_correction failed in eval_equations -- give up in solver 4437 retry: logT < hydro_mtx_min_allowed_logT 1185 4440 4440 8.798632 4157.495 -24.074525 3.311683 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230339 2578 225 -4.3810E+00 8.798632 3.506051 -24.275436 6.038881 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076724 6.442122 3.311683 -22.588451 -22.414363 49.153012 0.000004 0.000000 0.436424 0.124E-01 retry log_rel_run_E_err -7.4788566645932235 rel_E_err 1.6681954560782616D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1358 0.94888685583244980 1.1968520359460495E+050 k, q, energy_removed_layers after adjustment is 1360 0.94803821803871380 1.1970251102518359E+050 Layers above q= 0.94803821803871380 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -119846.91406250000 max vel inside fraction of cutoff 29.265595027104961 max c/cs inside fraction of cutoff 7.5622554580207932E-002 average v/vesc outside cutoff 7.9109614539059327 Kinetic plus potential energy outside cutoff 1.1970251102518359E+050 mass inside cutoff 1360 49.005210172147805 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8223835039196972E-002 retry: logT < hydro_mtx_min_allowed_logT 1185 4443 retry: adjust_correction failed in eval_equations -- give up in solver 4443 4450 8.798642 4028.479 -24.074347 3.314329 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230313 2590 227 -4.1912E+00 8.798642 3.553304 -24.271926 6.039030 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596104 5 2.8768E+05 4.076752 6.481866 3.314329 -22.587385 -22.597814 49.169261 0.000004 0.000000 0.436424 0.107E-01 max increase log_rel_run_E_err -7.4786345691173794 rel_E_err 1.8027368545693029D-12 Using fixed_vsurf 20000.000000000000 save photos/x450 for model 4450 k, q, energy_removed_layers before adjustment is 1277 0.94888685583244992 1.1968587305206004E+050 k, q, energy_removed_layers after adjustment is 1281 0.94782483100117521 1.1970094983765795E+050 Layers above q= 0.94782483100117521 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -132668.09179687500 max vel inside fraction of cutoff 8.1651976268081672 max c/cs inside fraction of cutoff 2.0669025673921284E-002 average v/vesc outside cutoff 8.3017078039802659 Kinetic plus potential energy outside cutoff 1.1970094983765795E+050 mass inside cutoff 1281 48.994179945281822 relax counter 5 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8222831360650857E-002 4460 8.798636 4005.902 -24.074486 3.318846 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230329 2580 227 -4.2680E+00 8.798636 3.626066 -24.274245 6.038935 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076734 6.617627 3.318846 -22.588085 -22.864898 49.169261 0.000004 0.000000 0.436424 0.794E-02 min_dr_div_cs log_rel_run_E_err -7.4783869085198562 rel_E_err 1.8102597190930211D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1244 0.94871664292526292 1.1969708081078640E+050 k, q, energy_removed_layers after adjustment is 1248 0.94782483100117709 1.1970996963755041E+050 Layers above q= 0.94782483100117709 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -155351.40234375000 max vel inside fraction of cutoff 8.5637761586541643 max c/cs inside fraction of cutoff 2.1687613259692547E-002 average v/vesc outside cutoff 9.0095371859914497 Kinetic plus potential energy outside cutoff 1.1970996963755041E+050 mass inside cutoff 1248 48.994179945281921 relax counter 15 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8224310142882705E-002 4470 8.798629 3885.729 -24.074556 3.321730 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230345 2558 227 -4.2265E+00 8.798629 3.667822 -24.276444 6.038843 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596106 5 2.8768E+05 4.076716 6.648227 3.321730 -22.588750 -23.012183 49.169261 0.000004 0.000000 0.436424 0.712E-02 min_dr_div_cs log_rel_run_E_err -7.4781595701571026 rel_E_err 1.8041361242638117D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1208 0.94871664292526414 1.1970207502488827E+050 k, q, energy_removed_layers after adjustment is 1211 0.94803821803871702 1.1971373879052940E+050 Layers above q= 0.94803821803871702 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -170191.33593750000 max vel inside fraction of cutoff 11.759213866309413 max c/cs inside fraction of cutoff 3.0272175748202984E-002 average v/vesc outside cutoff 9.4776371786527527 Kinetic plus potential energy outside cutoff 1.1971373879052940E+050 mass inside cutoff 1211 49.005210172147976 relax counter 25 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8225541466076494E-002 4480 8.798621 3715.545 -24.074642 3.325091 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230366 2551 227 -4.1602E+00 8.798621 3.712764 -24.279271 6.038726 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596106 5 2.8768E+05 4.076694 6.660313 3.325091 -22.589605 -23.167116 49.169261 0.000004 0.000000 0.436424 0.652E-02 min_dr_div_cs log_rel_run_E_err -7.4779290574919175 rel_E_err 1.8041358424427742D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1184 0.94871664292526270 1.1970694750650316E+050 k, q, energy_removed_layers after adjustment is 1187 0.94803821803871557 1.1971766281996988E+050 Layers above q= 0.94803821803871557 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -187841.78710937500 max vel inside fraction of cutoff 5.0709292893607447 max c/cs inside fraction of cutoff 1.3172627484578796E-002 average v/vesc outside cutoff 9.9653093619410598 Kinetic plus potential energy outside cutoff 1.1971766281996988E+050 mass inside cutoff 1187 49.005210172147905 relax counter 35 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8226919888926058E-002 4490 8.798622 3518.279 -24.074613 3.328493 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230364 2526 227 -4.2212E+00 8.798622 3.754526 -24.279009 6.038739 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596106 5 2.8768E+05 4.076696 6.649068 3.328493 -22.589520 -23.308393 49.169261 0.000004 0.000000 0.436424 0.618E-02 max increase log_rel_run_E_err -7.4777023861466985 rel_E_err 1.7833158514719567D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1149 0.94854745447679922 1.1971327492269426E+050 k, q, energy_removed_layers after adjustment is 1153 0.94803821803871458 1.1971986126166156E+050 Layers above q= 0.94803821803871458 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -205963.55664062500 max vel inside fraction of cutoff 4.4070697982008840 max c/cs inside fraction of cutoff 1.1450181040263980E-002 average v/vesc outside cutoff 10.439956429621217 Kinetic plus potential energy outside cutoff 1.1971986126166156E+050 mass inside cutoff 1153 49.005210172147848 relax counter 45 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8226984952018319E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4500 8.798628 3381.716 -24.074569 3.331636 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230348 2533 227 -4.3412E+00 8.798628 3.790381 -24.276883 6.038831 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596106 5 2.8768E+05 4.076713 6.652003 3.331636 -22.588868 -23.427985 49.169261 0.000004 0.000000 0.436424 0.583E-02 min_dr_div_cs log_rel_run_E_err -7.4774810147039483 rel_E_err 1.7436007620318877D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile31.data for model 4500 save photos/x500 for model 4500 k, q, energy_removed_layers before adjustment is 1146 0.94854745447679878 1.1971597861864161E+050 k, q, energy_removed_layers after adjustment is 1150 0.94803821803871413 1.1972191965428019E+050 Layers above q= 0.94803821803871413 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -222974.39062500000 max vel inside fraction of cutoff 8.7786406762147990 max c/cs inside fraction of cutoff 2.2631925076192581E-002 average v/vesc outside cutoff 10.881375411239269 Kinetic plus potential energy outside cutoff 1.1972191965428019E+050 mass inside cutoff 1150 49.005210172147827 relax counter 55 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8226168763693365E-002 4510 8.798634 3245.655 -24.074498 3.334551 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230333 2559 227 -4.3113E+00 8.798634 3.821766 -24.274891 6.038917 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076729 6.643436 3.334551 -22.588258 -23.531579 49.171126 0.000004 0.000000 0.436424 0.561E-02 min_dr_div_cs log_rel_run_E_err -7.4772616394232658 rel_E_err 1.6480750857585519D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1159 0.94854745447679834 1.1971792143382449E+050 k, q, energy_removed_layers after adjustment is 1164 0.94793123396543066 1.1972337263027028E+050 Layers above q= 0.94793123396543066 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -239062.64257812500 max vel inside fraction of cutoff 8.2000747956323963 max c/cs inside fraction of cutoff 2.0852867104255424E-002 average v/vesc outside cutoff 11.245007202563709 Kinetic plus potential energy outside cutoff 1.1972337263027028E+050 mass inside cutoff 1164 48.999680039610375 relax counter 65 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8225304750296766E-002 4520 8.798638 3156.062 -24.074469 3.336455 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230323 2531 227 -4.4850E+00 8.798638 3.841400 -24.273620 6.038972 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076740 6.634076 3.336455 -22.587868 -23.595924 49.169231 0.000004 0.000000 0.436424 0.551E-02 min_dr_div_cs log_rel_run_E_err -7.4770400292116772 rel_E_err 1.6715188390409590D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1127 0.94854745447679789 1.1971916587062216E+050 k, q, energy_removed_layers after adjustment is 1132 0.94793123396543022 1.1972435812992284E+050 Layers above q= 0.94793123396543022 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -249734.23242187500 max vel inside fraction of cutoff 7.0405384289741200 max c/cs inside fraction of cutoff 1.7797524665984388E-002 average v/vesc outside cutoff 11.496842094508901 Kinetic plus potential energy outside cutoff 1.1972435812992284E+050 mass inside cutoff 1132 48.999680039610347 relax counter 75 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8224736103039630E-002 4530 8.798640 3071.964 -24.074438 3.338146 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230316 2540 227 -4.4649E+00 8.798640 3.858342 -24.272637 6.039015 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076747 6.621041 3.338146 -22.587566 -23.651188 49.169231 0.000004 0.000000 0.436424 0.546E-02 min_dr_div_cs log_rel_run_E_err -7.4768182850497737 rel_E_err 1.6881393868770530D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1130 0.94854745447679800 1.1972006746043524E+050 k, q, energy_removed_layers after adjustment is 1134 0.94803821803871335 1.1972506812813723E+050 Layers above q= 0.94803821803871335 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -259338.32421875000 max vel inside fraction of cutoff 5.3668188184376850 max c/cs inside fraction of cutoff 1.3553591162339345E-002 average v/vesc outside cutoff 11.740744721480644 Kinetic plus potential energy outside cutoff 1.1972506812813723E+050 mass inside cutoff 1134 49.005210172147791 relax counter 85 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8224293507204655E-002 4540 8.798642 3004.549 -24.074418 3.339836 51.691176 0.000000 0.000000 0.000000 0.219332 -3.230311 2536 227 -4.4523E+00 8.798642 3.874832 -24.271996 6.039043 -99.000000 51.691176 0.000000 0.044508 0.780668 0.596105 5 2.8768E+05 4.076753 6.615475 3.339836 -22.587365 -23.704767 49.169231 0.000004 0.000000 0.436424 0.537E-02 max increase log_rel_run_E_err -7.4765967059564025 rel_E_err 1.6860397216585663D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1120 0.94854745447679778 1.1972130337997872E+050 k, q, energy_removed_layers after adjustment is 1124 0.94803821803871313 1.1972612712192054E+050 Layers above q= 0.94803821803871313 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -269053.45898437500 max vel inside fraction of cutoff 3.2617764880763698 max c/cs inside fraction of cutoff 8.2124405276470715E-003 average v/vesc outside cutoff 12.016656902172265 Kinetic plus potential energy outside cutoff 1.1972612712192054E+050 mass inside cutoff 1124 49.005210172147770 relax counter 95 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8223989794160940E-002 Relaxing model to lower mass! save LOGS/prerelax_prof001.data for model 4544 removing cells 1133 49.005210172147770 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 change to "basic.net" number of species 8 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.7.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.8.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.7.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.8.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.5.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.5.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 relax_composition: num_steps_to_use 100 avg remaining difference, lambda 8.5942431039240999D-02 1.3504266882730922D-02 avg remaining difference, lambda 8.3082478193567552D-02 1.9205482423214584D-02 avg remaining difference, lambda 8.0711589049613466D-02 2.0198076212394986D-02 avg remaining difference, lambda 7.8930857559967080D-02 2.1982447931449961D-02 avg remaining difference, lambda 7.7175230617198567D-02 2.2242592782582997D-02 avg remaining difference, lambda 7.5516331251888905D-02 2.1495230175462093D-02 avg remaining difference, lambda 7.3851475510191333D-02 2.2046300400288588D-02 avg remaining difference, lambda 7.2129472665339631D-02 2.3317107961048206D-02 avg remaining difference, lambda 7.0397559462979598D-02 2.4011172147681933D-02 avg remaining difference, lambda 6.8678467014090999D-02 2.4419773146555458D-02 10 7.725851 6.375E+04 -99.000000 -99.000000 49.005210 49.005210 0.562291 0.004334 0.244718 -6.665043 1224 0 -4.1114E+00 7.725851 0.863803 -99.000000 -99.000000 -99.000000 0.000000 0.227908 0.015769 0.190566 0.014890 4 6.7313E-04 0.712670 5.900127 -99.000000 -99.000000 -8.772724 0.000000 0.000065 0.001682 0.084345 0.000E+00 varcontrol avg remaining difference, lambda 6.6965779255191524D-02 2.4937768960310965D-02 avg remaining difference, lambda 6.5226099193821885D-02 2.5978642606992421D-02 avg remaining difference, lambda 6.3455383861295289D-02 2.7147343467249826D-02 avg remaining difference, lambda 6.1686944641083027D-02 2.7869017543907811D-02 avg remaining difference, lambda 5.9944719198041431D-02 2.8243017058393903D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.35.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.35.bin avg remaining difference, lambda 5.8238116958810801D-02 2.8469600823160739D-02 avg remaining difference, lambda 5.6569607223684135D-02 2.8649788337470922D-02 avg remaining difference, lambda 5.4939372208101390D-02 2.8818213270959681D-02 avg remaining difference, lambda 5.3340417932107816D-02 2.8979329954723715D-02 avg remaining difference, lambda 5.1786039303894207D-02 2.9140728190042091D-02 20 7.864368 7.649E+04 -99.000000 -99.000000 49.005210 49.005210 0.424042 0.003269 0.208508 -6.401164 1227 0 -4.0346E+00 7.864368 0.749318 -99.000000 -99.000000 -99.000000 0.000000 0.171873 0.022835 0.365622 0.023612 4 1.5548E-03 1.077944 5.987776 -99.000000 -99.000000 -8.522932 0.000000 0.000050 0.001269 0.170909 0.000E+00 varcontrol avg remaining difference, lambda 5.0267982245406719D-02 2.9314021158433189D-02 avg remaining difference, lambda 4.8780421689565832D-02 2.9509879284218818D-02 avg remaining difference, lambda 4.7330096615050880D-02 2.9731704232902830D-02 avg remaining difference, lambda 4.5911441875166624D-02 2.9973628576736602D-02 avg remaining difference, lambda 4.4523606170261999D-02 3.0228536630703611D-02 avg remaining difference, lambda 4.3165909826590333D-02 3.0493853914075338D-02 avg remaining difference, lambda 4.1830448163100421D-02 3.0773431992701349D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.2.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.2.bin avg remaining difference, lambda 4.0525352266130875D-02 3.1077044691744087D-02 avg remaining difference, lambda 3.9250944646592706D-02 3.1406437485527579D-02 avg remaining difference, lambda 3.8004547926310549D-02 3.1754566269764112D-02 30 7.999589 9.126E+04 -99.000000 -99.000000 49.005210 49.005210 0.311326 0.002400 0.178985 -6.109144 1237 0 -3.9973E+00 7.999589 0.633004 -99.000000 -99.000000 -99.000000 0.000000 0.126187 0.028596 0.508346 0.035311 4 2.5189E-03 1.446944 6.061858 -99.000000 -99.000000 -8.326034 0.000000 0.000038 0.000931 0.241486 0.000E+00 varcontrol avg remaining difference, lambda 3.6777593541595016D-02 3.2122251046934940D-02 avg remaining difference, lambda 3.5580373143697171D-02 3.2512616794888823D-02 avg remaining difference, lambda 3.4400295163354057D-02 3.2925793253063995D-02 avg remaining difference, lambda 3.3251256581646120D-02 3.3362105889772828D-02 avg remaining difference, lambda 3.2118161361470464D-02 3.3838854412352647D-02 avg remaining difference, lambda 3.1010736254064215D-02 3.4361648052254938D-02 avg remaining difference, lambda 2.9928119869780254D-02 3.4911018722295822D-02 avg remaining difference, lambda 2.8861659997788995D-02 3.5516661060608683D-02 avg remaining difference, lambda 2.7818272143512981D-02 3.6151346324420450D-02 avg remaining difference, lambda 2.6791641443530724D-02 3.6788221785060533D-02 40 8.129277 1.074E+05 -99.000000 -99.000000 49.005210 1.921095 0.219716 0.001694 0.154990 -5.810549 1264 0 -3.9334E+00 8.129277 0.517698 -99.000000 -99.000000 -99.000000 0.000000 0.089056 0.033278 0.624346 0.051959 4 3.6042E-03 1.807172 6.114599 -99.000000 -99.000000 -8.269275 47.084116 0.000028 0.000657 0.298848 0.000E+00 varcontrol avg remaining difference, lambda 2.5787725378565156D-02 3.7471241957646742D-02 avg remaining difference, lambda 2.4802815316374786D-02 3.8192979911696408D-02 avg remaining difference, lambda 2.3835647158207504D-02 3.8955600921024763D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.1.bin avg remaining difference, lambda 2.2887648171991622D-02 3.9772320737488077D-02 avg remaining difference, lambda 2.1954700198726172D-02 4.0646570962832515D-02 avg remaining difference, lambda 2.1041563150534282D-02 4.1591871443441758D-02 avg remaining difference, lambda 2.0143357456456689D-02 4.2610663718009881D-02 avg remaining difference, lambda 1.9263016054117458D-02 4.3703807918751038D-02 avg remaining difference, lambda 1.8397985713403280D-02 4.4906278566658450D-02 avg remaining difference, lambda 1.7545557575132563D-02 4.6256664413501347D-02 50 8.254313 1.263E+05 -99.000000 -99.000000 49.005210 1.140820 0.143936 0.001110 0.135141 -5.508876 1272 0 -3.8339E+00 8.254313 0.406921 -99.000000 -99.000000 -99.000000 0.000000 0.058340 0.037151 0.720302 0.078300 4 4.9165E-03 2.159453 6.174518 -99.000000 -99.000000 -8.320011 47.864391 0.000020 0.000431 0.346298 0.000E+00 varcontrol avg remaining difference, lambda 1.6707199282076073D-02 4.7706122364455657D-02 avg remaining difference, lambda 1.5884194962838088D-02 4.9222768990972575D-02 avg remaining difference, lambda 1.5074954271796167D-02 5.0833747579781673D-02 avg remaining difference, lambda 1.4282268817671490D-02 5.2582944705014595D-02 avg remaining difference, lambda 1.3504338744688904D-02 5.4468244347469996D-02 avg remaining difference, lambda 1.2741280572005126D-02 5.6504670393990264D-02 avg remaining difference, lambda 1.1991832929382981D-02 5.8746318642864996D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.001_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/31753995/MESA/data/kap_data/cache/gs98_z0.002_x0.0.bin avg remaining difference, lambda 1.1257592938524168D-02 6.1191461838918423D-02 avg remaining difference, lambda 1.0538311583016715D-02 6.3893001259089130D-02 avg remaining difference, lambda 9.8333121097791288D-03 6.6898716633720740D-02 60 8.375623 1.488E+05 -99.000000 -99.000000 49.005210 0.000000 0.080697 0.000622 0.118577 -5.206328 1281 0 -3.6737E+00 8.375623 0.304778 -99.000000 -99.000000 -99.000000 49.005210 0.032708 0.040384 0.800378 0.126823 4 6.6975E-03 2.504980 6.254443 -99.000000 -99.000000 -8.735185 48.405304 0.000013 0.000242 0.385895 0.000E+00 varcontrol avg remaining difference, lambda 9.1429445856698339D-03 7.0207023501251256D-02 avg remaining difference, lambda 8.4671698592101875D-03 7.3839562864319835D-02 avg remaining difference, lambda 7.8076989204149492D-03 7.7849586574908425D-02 avg remaining difference, lambda 7.1645287356525691D-03 8.2412297553442787D-02 avg remaining difference, lambda 6.5370287579469399D-03 8.7584273367088586D-02 avg remaining difference, lambda 5.9246130178197392D-03 9.3507437246265132D-02 avg remaining difference, lambda 5.3310400907719147D-03 1.0025763942326828D-01 avg remaining difference, lambda 4.7542313252362028D-03 1.0809418810483440D-01 avg remaining difference, lambda 4.1966994006886645D-03 1.1720233160887081D-01 avg remaining difference, lambda 3.6596328561741163D-03 1.2797357859066272D-01 70 8.488085 1.728E+05 -99.000000 -99.000000 49.005210 0.000000 0.030044 0.000232 0.105310 -4.918673 1291 0 -3.3920E+00 8.488085 0.207658 -99.000000 -99.000000 -99.000000 49.005210 0.012178 0.042972 0.864516 0.236386 3 9.6728E-03 2.828397 6.320542 -99.000000 -99.000000 -9.060285 48.816928 0.000008 0.000090 0.417611 0.000E+00 varcontrol avg remaining difference, lambda 3.1441023015928034D-03 1.4086950238586332D-01 avg remaining difference, lambda 2.6519437201993961D-03 1.5653393208029576D-01 avg remaining difference, lambda 2.1852853747491791D-03 1.7596846720663886D-01 avg remaining difference, lambda 1.7467740200979506D-03 2.0066555098195468D-01 avg remaining difference, lambda 1.3397143051952691D-03 2.3297600098913790D-01 avg remaining difference, lambda 9.6914054010397463D-04 2.7660668664469812D-01 avg remaining difference, lambda 6.4114313711297261D-04 3.3839079046444714D-01 avg remaining difference, lambda 3.6500928640833635D-04 4.3069017187295949D-01 avg remaining difference, lambda 1.5301737613126944D-04 5.8078548742531377D-01 avg remaining difference, lambda 2.2194430309162476D-05 8.5495540681248805D-01 80 8.562955 1.711E+05 -99.000000 -99.000000 49.005210 0.000000 0.000182 0.000001 0.097489 -4.723848 1295 0 -2.5672E+00 8.562955 0.128876 -99.000000 -99.000000 -99.000000 0.000000 0.000074 0.044499 0.902328 0.462067 6 2.0410E-02 3.045385 6.145450 -99.000000 -99.000000 -7.719730 49.005210 0.000004 0.000001 0.436309 0.000E+00 varcontrol avg remaining difference, lambda 0.0000000000000000D+00 1.0000000000000000D+00 avg remaining difference, lambda 0.0000000000000000D+00 1.0000000000000000D+00 finished doing relax composition relax_angular_momentum: max_steps_to_use 1000 10 8.563524 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722170 1301 227 -9.0000E+00 8.563524 0.139816 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 1.0000E-08 3.047106 6.200940 -99.000000 -99.000000 -7.812255 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0528243169052330E-004 1.0000000000000001E-009 10 20 8.563524 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722169 1301 227 -9.0000E+00 8.563524 0.139824 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 2.0000E-08 3.047107 6.200936 -99.000000 -99.000000 -7.812261 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0612555779220572E-004 1.0000000000000001E-009 20 30 8.563525 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722168 1301 227 -9.0000E+00 8.563525 0.139830 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 3.0000E-08 3.047108 6.200930 -99.000000 -99.000000 -7.812264 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0739308907950633E-004 1.0000000000000001E-009 30 40 8.563525 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722167 1301 227 -9.0000E+00 8.563525 0.139837 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 4.0000E-08 3.047109 6.200926 -99.000000 -99.000000 -7.812268 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0791351688683371E-004 1.0000000000000001E-009 40 50 8.563525 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722166 1301 227 -9.0000E+00 8.563525 0.139842 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 5.0000E-08 3.047110 6.200922 -99.000000 -99.000000 -7.812272 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0812789493049910E-004 1.0000000000000001E-009 50 60 8.563526 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722165 1301 227 -9.0000E+00 8.563526 0.139848 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 6.0000E-08 3.047111 6.200918 -99.000000 -99.000000 -7.812277 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0820258281464824E-004 1.0000000000000001E-009 60 70 8.563526 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722165 1301 227 -9.0000E+00 8.563526 0.139853 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 7.0000E-08 3.047112 6.200916 -99.000000 -99.000000 -7.812283 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0821794832666713E-004 1.0000000000000001E-009 70 80 8.563526 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722164 1301 227 -9.0000E+00 8.563526 0.139858 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 8.0000E-08 3.047112 6.200914 -99.000000 -99.000000 -7.812290 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0832308647127044E-004 1.0000000000000001E-009 80 90 8.563526 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722163 1301 227 -9.0000E+00 8.563526 0.139863 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 9.0000E-08 3.047113 6.200912 -99.000000 -99.000000 -7.812297 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0841074773389384E-004 1.0000000000000001E-009 90 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 8.563527 1.744E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.722162 1301 227 -9.0000E+00 8.563527 0.139868 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.464756 3 1.0000E-07 3.047114 6.200911 -99.000000 -99.000000 -7.812305 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 5.0839393137644992E-004 1.0000000000000001E-009 100 finished doing relax angular momentum relax_entropy: max_steps_to_use 10000 10 8.629975 1.661E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.330049 1301 227 -1.6301E+01 8.629975 0.152443 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.493353 3 5.0000E-16 3.324256 6.141209 -99.000000 -99.000000 -7.737436 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.21104117141176684 4.9999999999999999E-017 10 20 8.674558 1.544E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -4.059193 1301 227 -1.6301E+01 8.674558 0.195775 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.515046 3 1.0000E-15 3.514070 6.100456 -99.000000 -99.000000 -7.752805 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.18206049793274315 4.9999999999999999E-017 20 30 8.704706 1.407E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.867252 1302 227 -1.6301E+01 8.704706 0.264547 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.531893 3 1.5000E-15 3.646449 6.077371 -99.000000 -99.000000 -7.822807 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.15675687505865504 4.9999999999999999E-017 30 40 8.725292 1.261E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.728404 1306 227 -1.6301E+01 8.725292 0.355162 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.545158 3 2.0000E-15 3.740302 6.068153 -99.000000 -99.000000 -7.931657 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.13481513357972780 4.9999999999999999E-017 40 50 8.739679 1.104E+05 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.625748 1309 227 -1.6301E+01 8.739679 0.464527 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.555675 3 2.5000E-15 3.808358 6.055279 -99.000000 -99.000000 -8.058490 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.11760114314832112 4.9999999999999999E-017 50 60 8.750193 9.421E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.547873 1322 227 -1.6301E+01 8.750193 0.589118 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.564029 3 3.0000E-15 3.859341 6.029371 -99.000000 -99.000000 -8.255888 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.10055196959800966 4.9999999999999999E-017 60 70 8.758338 8.050E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.487189 1342 227 -1.6301E+01 8.758338 0.724478 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.570659 3 3.5000E-15 3.899001 6.026797 -99.000000 -99.000000 -8.443908 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.7575393398478238E-002 4.9999999999999999E-017 70 80 8.765001 6.883E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.438779 1361 227 -1.6301E+01 8.765001 0.864982 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.575908 3 4.0000E-15 3.930922 6.035891 -99.000000 -99.000000 -8.645619 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.4197458391292978E-002 4.9999999999999999E-017 80 90 8.770631 5.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.399574 1386 227 -1.6301E+01 8.770631 1.004583 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.580059 3 4.5000E-15 3.957167 6.035892 -99.000000 -99.000000 -8.862899 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.2637353127002221E-002 4.9999999999999999E-017 90 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 8.775444 5.015E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.367574 1388 227 -1.6301E+01 8.775444 1.137078 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.583340 3 5.0000E-15 3.978957 6.030013 -99.000000 -99.000000 -9.064704 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.1608274653430201E-002 4.9999999999999999E-017 100 110 8.779548 4.426E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.341418 1399 227 -1.6301E+01 8.779548 1.257412 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.585936 3 5.5000E-15 3.997054 6.053698 -99.000000 -99.000000 -9.227563 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.1858054281560822E-002 4.9999999999999999E-017 110 120 8.783014 4.013E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.320075 1408 227 -1.6301E+01 8.783014 1.362755 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.587994 3 6.0000E-15 4.012020 6.093865 -99.000000 -99.000000 -9.342886 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.3806775892285638E-002 4.9999999999999999E-017 120 130 8.785915 3.725E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.302700 1416 227 -1.6301E+01 8.785915 1.451929 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.589628 3 6.5000E-15 4.024337 6.142896 -99.000000 -99.000000 -9.452844 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.6701007173406618E-002 4.9999999999999999E-017 130 140 8.788318 3.513E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.288601 1423 227 -1.6301E+01 8.788318 1.525482 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.590928 3 7.0000E-15 4.034417 6.188410 -99.000000 -99.000000 -9.538007 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.1080195239891054E-002 4.9999999999999999E-017 140 150 8.790297 3.354E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.277186 1429 227 -1.6301E+01 8.790297 1.584889 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.591963 3 7.5000E-15 4.042633 6.226484 -99.000000 -99.000000 -9.604766 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6448526288305620E-002 4.9999999999999999E-017 150 160 8.791917 3.234E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.267959 1435 227 -1.6301E+01 8.791917 1.632067 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.592789 3 8.0000E-15 4.049310 6.257676 -99.000000 -99.000000 -9.656953 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.2759264231348382E-002 4.9999999999999999E-017 160 170 8.793239 3.144E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.260509 1441 227 -1.6301E+01 8.793239 1.669040 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.593449 3 8.5000E-15 4.054726 6.282429 -99.000000 -99.000000 -9.697685 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 9.8421234335120868E-003 4.9999999999999999E-017 170 180 8.794315 3.075E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.254501 1441 227 -1.6301E+01 8.794315 1.697750 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.593975 3 9.0000E-15 4.059109 6.301613 -99.000000 -99.000000 -9.729309 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.5393564789531650E-003 4.9999999999999999E-017 180 190 8.795189 3.023E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.249659 1445 227 -1.6301E+01 8.795189 1.719882 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.594396 3 9.5000E-15 4.062653 6.316392 -99.000000 -99.000000 -9.753608 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.7801980399675599E-003 4.9999999999999999E-017 190 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 8.795897 2.984E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.245759 1448 227 -1.6301E+01 8.795897 1.736862 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.594733 3 1.0000E-14 4.065515 6.327746 -99.000000 -99.000000 -9.772153 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.4380295965256123E-003 4.9999999999999999E-017 200 210 8.796471 2.955E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.242618 1449 227 -1.6301E+01 8.796471 1.749819 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595002 3 1.0500E-14 4.067826 6.336432 -99.000000 -99.000000 -9.786224 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.3874719985846772E-003 4.9999999999999999E-017 210 220 8.796934 2.933E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.240091 1448 227 -1.6301E+01 8.796934 1.759674 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595218 3 1.1000E-14 4.069689 6.343053 -99.000000 -99.000000 -9.796874 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.5846347463080658E-003 4.9999999999999999E-017 220 230 8.797309 2.916E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.238057 1445 227 -1.6301E+01 8.797309 1.767150 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595390 3 1.1500E-14 4.071191 6.348087 -99.000000 -99.000000 -9.804924 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.9761790438098956E-003 4.9999999999999999E-017 230 240 8.797612 2.902E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.236421 1441 227 -1.6301E+01 8.797612 1.772823 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595528 3 1.2000E-14 4.072401 6.351414 -99.000000 -99.000000 -9.809857 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.5136587217733214E-003 4.9999999999999999E-017 240 250 8.797856 2.892E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.235106 1441 227 -1.6301E+01 8.797856 1.777119 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595639 3 1.2500E-14 4.073376 6.353593 -99.000000 -99.000000 -9.812766 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.1605448412157543E-003 4.9999999999999999E-017 250 260 8.798053 2.885E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.234048 1441 227 -1.6301E+01 8.798053 1.780362 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595727 3 1.3000E-14 4.074160 6.355809 -99.000000 -99.000000 -9.816305 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.8394218555691182E-004 4.9999999999999999E-017 260 270 8.798212 2.879E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.233197 1441 227 -1.6301E+01 8.798212 1.782810 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595798 3 1.3500E-14 4.074792 6.357483 -99.000000 -99.000000 -9.818973 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.7346042010152536E-004 4.9999999999999999E-017 270 280 8.798340 2.875E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.232514 1441 227 -1.6301E+01 8.798340 1.784657 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595855 3 1.4000E-14 4.075301 6.358747 -99.000000 -99.000000 -9.820983 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.1326989319805893E-004 4.9999999999999999E-017 280 290 8.798444 2.872E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.231964 1441 227 -1.6301E+01 8.798444 1.786049 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595900 3 1.4500E-14 4.075710 6.359700 -99.000000 -99.000000 -9.822497 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.9132902988693564E-004 4.9999999999999999E-017 290 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 8.798527 2.870E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.231523 1441 227 -1.6301E+01 8.798527 1.787099 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595937 3 1.5000E-14 4.076039 6.360419 -99.000000 -99.000000 -9.823638 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.9847839678897188E-004 4.9999999999999999E-017 300 310 8.798594 2.868E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.231168 1441 227 -1.6301E+01 8.798594 1.787890 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595966 3 1.5500E-14 4.076304 6.360961 -99.000000 -99.000000 -9.824497 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.2775555675976809E-004 4.9999999999999999E-017 310 320 8.798648 2.867E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230883 1441 227 -1.6301E+01 8.798648 1.788486 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595989 3 1.6000E-14 4.076516 6.361369 -99.000000 -99.000000 -9.825144 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.7386850727746134E-004 4.9999999999999999E-017 320 330 8.798691 2.866E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230654 1443 227 -1.6301E+01 8.798691 1.788936 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596008 3 1.6500E-14 4.076687 6.361677 -99.000000 -99.000000 -9.825633 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.3683310311144974E-004 4.9999999999999999E-017 330 340 8.798726 2.865E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230470 1443 227 -1.6301E+01 8.798726 1.789277 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596023 3 1.7000E-14 4.076825 6.361911 -99.000000 -99.000000 -9.826002 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.0447348842558364E-004 4.9999999999999999E-017 340 350 8.798754 2.865E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230323 1442 227 -1.6301E+01 8.798754 1.789534 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596035 3 1.7500E-14 4.076935 6.362087 -99.000000 -99.000000 -9.826281 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.9857570519482302E-005 4.9999999999999999E-017 350 360 8.798777 2.862E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230204 1440 227 -1.6301E+01 8.798777 1.789743 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596044 3 1.8000E-14 4.077024 6.360704 -99.000000 -99.000000 -9.822837 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.1132720893562927E-005 4.9999999999999999E-017 360 370 8.798795 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230109 1440 227 -1.6301E+01 8.798795 1.789888 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596052 3 1.8500E-14 4.077095 6.360806 -99.000000 -99.000000 -9.823001 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.6748017015621775E-005 4.9999999999999999E-017 370 380 8.798809 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.230033 1439 227 -1.6301E+01 8.798809 1.789998 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596058 3 1.9000E-14 4.077153 6.360882 -99.000000 -99.000000 -9.823124 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.5793945291035966E-005 4.9999999999999999E-017 380 390 8.798821 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229971 1439 227 -1.6301E+01 8.798821 1.790081 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596063 3 1.9500E-14 4.077199 6.360940 -99.000000 -99.000000 -9.823216 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.7402152095379859E-005 4.9999999999999999E-017 390 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 400 8.798830 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229922 1439 227 -1.6301E+01 8.798830 1.790143 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596067 3 2.0000E-14 4.077236 6.360983 -99.000000 -99.000000 -9.823286 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.0989937210818405E-005 4.9999999999999999E-017 400 410 8.798838 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229883 1439 227 -1.6301E+01 8.798838 1.790190 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596071 3 2.0500E-14 4.077265 6.361016 -99.000000 -99.000000 -9.823339 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6087735114495230E-005 4.9999999999999999E-017 410 420 8.798844 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229851 1439 227 -1.6301E+01 8.798844 1.790225 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596073 3 2.1000E-14 4.077289 6.361041 -99.000000 -99.000000 -9.823378 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.2337916686690284E-005 4.9999999999999999E-017 420 430 8.798849 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229825 1440 227 -1.6301E+01 8.798849 1.790216 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596075 3 2.1500E-14 4.077308 6.361035 -99.000000 -99.000000 -9.823369 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6432212244897369E-005 4.9999999999999999E-017 430 440 8.798853 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229805 1440 227 -1.6301E+01 8.798853 1.790211 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596077 3 2.2000E-14 4.077324 6.361031 -99.000000 -99.000000 -9.823363 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.2478082375484799E-005 4.9999999999999999E-017 440 450 8.798856 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229789 1440 227 -1.6301E+01 8.798856 1.790207 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596078 3 2.2500E-14 4.077336 6.361028 -99.000000 -99.000000 -9.823358 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 9.4831015082864639E-006 4.9999999999999999E-017 450 460 8.798859 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229775 1440 227 -1.6301E+01 8.798859 1.790204 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596079 3 2.3000E-14 4.077346 6.361026 -99.000000 -99.000000 -9.823355 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.2123858197902098E-006 4.9999999999999999E-017 460 470 8.798861 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229765 1440 227 -1.6301E+01 8.798861 1.790202 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596080 3 2.3500E-14 4.077354 6.361025 -99.000000 -99.000000 -9.823353 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.4893902329557272E-006 4.9999999999999999E-017 470 480 8.798862 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229756 1440 227 -1.6301E+01 8.798862 1.790200 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596081 3 2.4000E-14 4.077360 6.361024 -99.000000 -99.000000 -9.823352 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.1809076947527804E-006 4.9999999999999999E-017 480 490 8.798863 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229750 1440 227 -1.6301E+01 8.798863 1.790199 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596081 3 2.4500E-14 4.077365 6.361023 -99.000000 -99.000000 -9.823350 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.1864972688530873E-006 4.9999999999999999E-017 490 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 500 8.798865 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229744 1440 227 -1.6301E+01 8.798865 1.790199 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596082 3 2.5000E-14 4.077369 6.361022 -99.000000 -99.000000 -9.823349 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.4302833165879881E-006 4.9999999999999999E-017 500 510 8.798865 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229740 1440 227 -1.6301E+01 8.798865 1.790198 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596082 3 2.5500E-14 4.077373 6.361022 -99.000000 -99.000000 -9.823349 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.8548335949907186E-006 4.9999999999999999E-017 510 520 8.798866 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229736 1440 227 -1.6301E+01 8.798866 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596082 3 2.6000E-14 4.077375 6.361022 -99.000000 -99.000000 -9.823348 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.4166360328007701E-006 4.9999999999999999E-017 520 530 8.798867 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229733 1440 227 -1.6301E+01 8.798867 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596082 3 2.6500E-14 4.077377 6.361022 -99.000000 -99.000000 -9.823348 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.0827155650226110E-006 4.9999999999999999E-017 530 540 8.798867 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229731 1440 227 -1.6301E+01 8.798867 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.7000E-14 4.077379 6.361021 -99.000000 -99.000000 -9.823348 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.2809338967190011E-007 4.9999999999999999E-017 540 550 8.798867 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229729 1440 227 -1.6301E+01 8.798867 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.7500E-14 4.077380 6.361021 -99.000000 -99.000000 -9.823348 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.3381128448157405E-007 4.9999999999999999E-017 550 560 8.798868 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229728 1440 227 -1.6301E+01 8.798868 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.8000E-14 4.077382 6.361021 -99.000000 -99.000000 -9.823347 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.8547207057282092E-007 4.9999999999999999E-017 560 570 8.798868 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229727 1440 227 -1.6301E+01 8.798868 1.790197 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.8500E-14 4.077382 6.361021 -99.000000 -99.000000 -9.823347 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.7213480897394941E-007 4.9999999999999999E-017 570 580 8.798868 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229726 1440 227 -1.6301E+01 8.798868 1.790196 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.9000E-14 4.077383 6.361021 -99.000000 -99.000000 -9.823347 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.8548062661947250E-007 4.9999999999999999E-017 580 590 8.798868 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229725 1440 227 -1.6301E+01 8.798868 1.790196 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 2.9500E-14 4.077384 6.361021 -99.000000 -99.000000 -9.823347 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.1918045445476914E-007 4.9999999999999999E-017 590 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 600 8.798868 2.861E+04 -99.000000 -99.000000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.229724 1440 227 -1.6301E+01 8.798868 1.790196 -99.000000 -99.000000 -99.000000 0.000000 0.000000 0.044508 0.902559 0.596083 3 3.0000E-14 4.077384 6.361021 -99.000000 -99.000000 -9.823347 49.005210 0.000004 0.000000 0.436424 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6841822613189501E-007 4.9999999999999999E-017 600 finished doing relax entropy save LOGS/postrelax_prof001.data for model 4544 residual_norm > tol_residual_norm 4550 2.0861337462756712D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4550 6.6393240524046229D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4550 4550 8.800022 2.391E+04 -11.881018 3.334667 49.005210 0.000000 0.000000 0.000000 0.097441 -3.226727 1434 228 -5.4042E+00 8.800022 1.790504 -24.087831 6.056057 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595975 12 2.8768E+05 4.080608 6.050248 3.334667 -22.460247 -9.268511 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.5010461763860858 rel_E_err 6.0533590694395488D-12 save photos/x550 for model 4550 check gamma integral 4.8223862181073954E-002 residual_norm > tol_residual_norm 4554 3.8732705384371303D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4554 9.0637390541815271D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4554 residual_norm > tol_residual_norm 4554 4.4889895780632994D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4554 1.0441313618188917D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4554 max_residual > tol_max_residual 4554 4.6498925710854427D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4554 residual_norm > tol_residual_norm 4555 1.6001713898805319D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4555 7.2930249823024249D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4555 residual_norm > tol_residual_norm 4556 1.5248600800687194D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4556 1.0492838184046013D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4556 4560 8.800217 2.377E+04 -19.291926 3.335375 49.005210 0.000000 0.000000 0.000000 0.097441 -3.226218 1433 233 -6.1176E+00 8.800217 1.792086 -24.048993 6.058895 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595957 12 2.8768E+05 4.081155 6.042833 3.335375 -22.439295 -9.263393 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.5006103567380427 rel_E_err 3.3593386349927066D-12 check gamma integral 4.8225245433149433E-002 residual_norm > tol_residual_norm 4561 2.0155027467388626D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4561 1.1040304444374351D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4561 residual_norm > tol_residual_norm 4562 1.2292618050354850D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4562 5.0489591469901465D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4562 residual_norm > tol_residual_norm 4562 1.2838242788501281D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4562 8.8258920679210887D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4562 max_residual > tol_max_residual 4566 6.0713937963027119D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4566 4570 8.800323 2.375E+04 -14.160871 3.335724 49.005210 0.000000 0.000000 0.000000 0.097441 -3.225944 1433 237 -6.5299E+00 8.800323 1.792420 -24.074167 6.060418 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595947 10 2.8768E+05 4.081450 6.042214 3.335724 -22.427997 -9.263105 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.5001472888048593 rel_E_err 2.1458692950168370D-12 check gamma integral 4.8225742088379805E-002 4580 8.800720 2.367E+04 -17.860730 3.337014 49.005210 0.000000 0.000000 0.000000 0.097441 -3.224912 1433 237 -5.7381E+00 8.800720 1.793929 -23.988324 6.066203 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595910 15 2.8768E+05 4.082560 6.039494 3.337014 -22.385596 -9.261898 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4998461432857422 rel_E_err 2.2126808669939696D-12 check gamma integral 4.8228101729262632E-002 max_residual > tol_max_residual 4582 1.6025867743019364D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4582 max_residual > tol_max_residual 4586 5.2160686134415914D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4586 4590 8.801159 2.353E+04 -14.695618 3.338581 49.005210 0.000000 0.000000 0.000000 0.097441 -3.223772 1432 239 -5.5483E+00 8.801159 1.796497 -23.819365 6.072615 -99.000000 0.000000 0.000000 0.044508 0.902559 0.595869 12 2.8768E+05 4.083786 6.034311 3.338581 -22.338732 -9.259529 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4995433422339062 rel_E_err 2.1940855215505101D-12 check gamma integral 4.8233206166046844E-002 residual_norm > tol_residual_norm 4592 2.6183354399062218D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4592 9.1717664883816205D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4592 residual_norm > tol_residual_norm 4598 3.5211760612190365D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4598 9.0356897282234408D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4598 residual_norm > tol_residual_norm 4598 2.2196223257179120D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4598 8.5516201403954620D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4598 residual_norm > tol_residual_norm 4598 1.5254640677389537D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4598 1.0256951378538241D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4598 residual_norm > tol_residual_norm 4599 2.0731285392162865D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4599 1.3900075492164576D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4599 max_residual > tol_max_residual 4599 1.5172090623698739D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4599 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4600 8.801357 2.340E+04 -19.883836 3.339579 49.005210 0.000000 0.000000 0.000000 0.097441 -3.223256 1384 245 -6.5627E+00 8.801357 1.799565 -23.703190 6.075481 -4.964042 0.000000 0.000000 0.044508 0.902559 0.595850 10 2.8768E+05 4.084341 6.030935 3.339579 -22.317548 -9.259009 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4992167396283538 rel_E_err 1.9469156018155490D-12 save LOGS/profile32.data for model 4600 save photos/x600 for model 4600 check gamma integral 4.8238284447797292E-002 max_residual > tol_max_residual 4603 4.8347869083756448D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4603 max_residual > tol_max_residual 4607 4.7993129634251994D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4607 4610 8.801371 2.339E+04 -19.512736 3.339694 49.005210 0.000000 0.000000 0.000000 0.097441 -3.223220 1384 247 -6.3729E+00 8.801371 1.799988 -23.690973 6.075676 -4.964915 0.000000 0.000000 0.044508 0.902559 0.595849 12 2.8768E+05 4.084379 6.030660 3.339694 -22.316101 -9.259088 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4989493268372405 rel_E_err 1.9321051535049843D-12 check gamma integral 4.8238895850597326E-002 max_residual > tol_max_residual 4611 4.7647485688005850D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4611 4620 8.801393 2.336E+04 -16.034860 3.339852 49.005210 0.000000 0.000000 0.000000 0.097441 -3.223164 1386 248 -5.8821E+00 8.801393 1.800818 -23.657925 6.075992 -4.966305 0.000000 0.000000 0.044508 0.902559 0.595847 12 2.8768E+05 4.084440 6.030210 3.339852 -22.313779 -9.259313 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4983626373514669 rel_E_err 1.9500422493443492D-12 check gamma integral 4.8239949279038540E-002 residual_norm > tol_residual_norm 4630 3.1501346602468293D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4630 9.0750041054581190D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4630 4630 8.801451 2.323E+04 -20.887834 3.340354 49.005210 0.000000 0.000000 0.000000 0.097441 -3.223013 1385 249 -5.3914E+00 8.801451 1.805284 -23.575240 6.076835 -4.970276 0.000000 0.000000 0.044508 0.902559 0.595841 12 2.8768E+05 4.084603 6.029628 3.340354 -22.307572 -9.261938 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4980740093890041 rel_E_err 2.4965477483568532D-12 check gamma integral 4.8243780685064651E-002 max_residual > tol_max_residual 4633 1.2371364928685558D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4633 residual_norm > tol_residual_norm 4633 1.9371753520266421D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4633 3.3398376312729028D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4633 max_residual > tol_max_residual 4634 2.6095656698470544D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4634 residual_norm > tol_residual_norm 4638 2.8189384525460160D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4638 1.6091909910860117D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4638 4640 8.801466 2.317E+04 -16.001989 3.340561 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222972 1386 253 -5.8037E+00 8.801466 1.807907 -23.549781 6.077061 -4.970601 0.000000 0.000000 0.044508 0.902559 0.595840 12 2.8768E+05 4.084647 6.030128 3.340561 -22.305898 -9.264119 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4977917961888201 rel_E_err 1.9776884022501786D-12 check gamma integral 4.8245273179742400E-002 max_residual > tol_max_residual 4641 3.1335070883346292D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4641 max_residual > tol_max_residual 4645 4.5763660394928143D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4645 residual_norm > tol_residual_norm 4648 1.2040929052266381D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4648 5.3584266040208731D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4648 max_residual > tol_max_residual 4648 1.7496787579779523D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4648 4650 8.801472 2.314E+04 -21.262774 3.340645 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222959 1386 257 -6.2160E+00 8.801472 1.809103 -23.540800 6.077136 -4.970424 0.000000 0.000000 0.044508 0.902559 0.595840 12 2.8768E+05 4.084661 6.030457 3.340645 -22.305345 -9.265189 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4975185315291473 rel_E_err 1.9205858970982602D-12 save photos/x650 for model 4650 check gamma integral 4.8245847617874503E-002 residual_norm > tol_residual_norm 4656 1.4670924242475991D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4656 5.2806436640411174D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4656 residual_norm > tol_residual_norm 4656 5.5624779926072999D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4656 7.6482535630253357D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4656 max_residual > tol_max_residual 4656 3.4295374600830521D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4656 4660 8.801475 2.312E+04 -17.975220 3.340701 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222951 1386 260 -6.3273E+00 8.801475 1.809934 -23.535325 6.077179 -4.970310 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084670 6.030688 3.340701 -22.305025 -9.268127 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4972494741015110 rel_E_err 1.8447234929398017D-12 check gamma integral 4.8246216041567987E-002 residual_norm > tol_residual_norm 4667 1.3447682653972947D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4667 5.9283436684001697D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4667 residual_norm > tol_residual_norm 4670 1.5604844588623556D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4670 6.8831218494891835D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4670 max_residual > tol_max_residual 4670 2.9956363653518680D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4670 4670 8.801478 2.310E+04 -15.267243 3.340770 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222943 1386 263 -6.4385E+00 8.801478 1.810985 -23.529185 6.077224 -4.969964 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084679 6.031049 3.340770 -22.304684 -9.269111 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4969791065932787 rel_E_err 1.9362191428841016D-12 check gamma integral 4.8246649931908143E-002 residual_norm > tol_residual_norm 4678 1.5224813264369467D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4678 6.7095247621396473D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4678 max_residual > tol_max_residual 4678 2.8517690946830036D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4678 max_residual > tol_max_residual 4678 6.3117476548794668D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4678 4680 8.801480 2.308E+04 -14.085330 3.340816 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222938 1386 266 -6.5498E+00 8.801480 1.811720 -23.525321 6.077252 -4.969747 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084684 6.031294 3.340816 -22.304480 -9.269793 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4967123388604326 rel_E_err 1.9072564887888905D-12 check gamma integral 4.8246934420397784E-002 residual_norm > tol_residual_norm 4689 1.6634964108632339D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4689 5.1973973671937741D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4689 max_residual > tol_max_residual 4689 3.0970261837817568D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4689 4690 8.801481 2.307E+04 -21.473949 3.340861 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222933 1387 268 -6.3601E+00 8.801481 1.812450 -23.521766 6.077276 -4.969541 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084689 6.031538 3.340861 -22.304299 -9.270471 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4964435359005321 rel_E_err 1.9368773817109081D-12 check gamma integral 4.8247204006061632E-002 residual_norm > tol_residual_norm 4693 1.1009704842831538D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4693 4.6880144619965695D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4693 residual_norm > tol_residual_norm 4693 1.4523545691740588D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4693 6.7210257118388503D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4693 residual_norm > tol_residual_norm 4698 1.5881669585882346D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4698 6.4564898263830689D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4698 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4700 8.801482 2.306E+04 -16.960691 3.340885 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222931 1387 271 -6.4713E+00 8.801482 1.812840 -23.519982 6.077288 -4.969415 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084691 6.031671 3.340885 -22.304211 -9.270836 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4961769913789373 rel_E_err 1.8982056574445849D-12 save LOGS/profile33.data for model 4700 save photos/x700 for model 4700 check gamma integral 4.8247342360630822E-002 residual_norm > tol_residual_norm 4701 1.7766510716751843D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4701 7.1033252596859914D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4701 residual_norm > tol_residual_norm 4705 1.7609138618500339D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4705 7.1005901056326606D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4705 residual_norm > tol_residual_norm 4709 2.2279299321376755D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4709 7.0978560041074265D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4709 4710 8.801483 2.305E+04 -15.282108 3.340904 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222929 1387 274 -6.5826E+00 8.801483 1.813147 -23.518624 6.077296 -4.969317 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084693 6.031776 3.340904 -22.304145 -9.271123 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4959136148209673 rel_E_err 1.9479029353610328D-12 check gamma integral 4.8247449025320639E-002 residual_norm > tol_residual_norm 4712 2.4765959337163875D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4712 7.7734429867079111D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4712 residual_norm > tol_residual_norm 4716 2.4608059473127033D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4716 7.7578267125903419D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4716 residual_norm > tol_residual_norm 4720 2.4482145839405384D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4720 7.7422092048403210D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4720 4720 8.801483 2.304E+04 -21.320317 3.340922 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222928 1387 277 -6.6939E+00 8.801483 1.813440 -23.517369 6.077304 -4.969225 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084694 6.031876 3.340922 -22.304086 -9.271397 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4956466456350768 rel_E_err 1.9691312424459346D-12 check gamma integral 4.8247548680867558E-002 residual_norm > tol_residual_norm 4723 2.7100815492185294D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4723 8.4429243091075565D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4723 residual_norm > tol_residual_norm 4727 2.6894092251311672D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4727 8.4153285030948960D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4727 4730 8.801484 2.304E+04 -21.620904 3.340938 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222926 1387 279 -6.5041E+00 8.801484 1.813718 -23.516212 6.077311 -4.969144 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084696 6.031970 3.340938 -22.304031 -9.271656 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4953803838228561 rel_E_err 1.9334216079112303D-12 check gamma integral 4.8247641441705742E-002 residual_norm > tol_residual_norm 4731 2.6363616717234452D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4731 8.3878740237080140D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4731 residual_norm > tol_residual_norm 4735 2.6187857178346332D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4735 8.3603165757860115D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4735 residual_norm > tol_residual_norm 4738 2.9325568571804610D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4738 9.0935378160255723D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4738 4740 8.801484 2.303E+04 -15.322462 3.340954 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222924 1387 282 -6.6154E+00 8.801484 1.813982 -23.515141 6.077318 -4.969062 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084697 6.032059 3.340954 -22.303982 -9.271902 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4951149488608424 rel_E_err 1.9426369967321355D-12 check gamma integral 4.8247728141280075E-002 residual_norm > tol_residual_norm 4742 2.8716997614725815D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4742 9.0545639819643767D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4742 residual_norm > tol_residual_norm 4746 2.8495006222595626D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4746 9.0156831408922916D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4746 residual_norm > tol_residual_norm 4750 2.8239796432459576D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4750 8.9768330534083146D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4750 4750 8.801485 2.303E+04 -17.753535 3.340970 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222923 1387 285 -6.7267E+00 8.801485 1.814252 -23.514075 6.077324 -4.968980 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084699 6.032150 3.340970 -22.303934 -9.272153 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4948494571636832 rel_E_err 2.0054991166422545D-12 save photos/x750 for model 4750 check gamma integral 4.8247815263030472E-002 residual_norm > tol_residual_norm 4753 3.1153615380427424D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4753 9.7404042855513448D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4753 residual_norm > tol_residual_norm 4757 3.0860967412108362D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4757 9.6906815571158281D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4757 4760 8.801485 2.302E+04 -15.434136 3.340986 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222921 1387 287 -6.5369E+00 8.801485 1.814507 -23.513088 6.077330 -4.968908 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084700 6.032235 3.340986 -22.303890 -9.272391 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4945841254283350 rel_E_err 1.9658400295796556D-12 check gamma integral 4.8247896524712161E-002 residual_norm > tol_residual_norm 4761 3.0451941617428292D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4761 9.6409389298206860D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4761 residual_norm > tol_residual_norm 4765 3.0081823154756829D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4765 9.5912943280248478D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4765 residual_norm > tol_residual_norm 4768 3.2993466351673612D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4768 1.0383031181196924D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4768 4770 8.801486 2.302E+04 -14.115235 3.341000 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222920 1387 290 -6.6482E+00 8.801486 1.814750 -23.512172 6.077336 -4.968835 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084701 6.032316 3.341000 -22.303850 -9.272617 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4943230333159114 rel_E_err 1.9195985215763802D-12 check gamma integral 4.8247972640647584E-002 residual_norm > tol_residual_norm 4772 3.2573356977016045D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4772 1.0323187047508590D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4772 residual_norm > tol_residual_norm 4776 3.2164807954663564D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4776 1.0263223739587056D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4776 residual_norm > tol_residual_norm 4780 3.1730242600793961D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4780 1.0203251428594874D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4780 4780 8.801486 2.301E+04 -19.520074 3.341015 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222919 1389 293 -6.7595E+00 8.801486 1.814996 -23.511256 6.077341 -4.968767 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084702 6.032394 3.341015 -22.303810 -9.272842 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4940620780136644 rel_E_err 1.9938153176914063D-12 check gamma integral 4.8248048808773904E-002 residual_norm > tol_residual_norm 4783 3.4739314789745706D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4783 1.1021158518495761D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4783 residual_norm > tol_residual_norm 4787 3.4306470002408594D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4787 1.0951660382182389D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4787 residual_norm > tol_residual_norm 4790 1.9764042756984847D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4790 7.5592123472328340D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4790 4790 8.801486 2.301E+04 -21.689373 3.341028 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222918 1389 296 -6.8708E+00 8.801486 1.815216 -23.510461 6.077345 -4.968708 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084703 6.032467 3.341028 -22.303776 -9.273047 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4937982203979612 rel_E_err 1.9454345229368479D-12 check gamma integral 4.8248115843782836E-002 residual_norm > tol_residual_norm 4794 1.9405056281333767D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4794 7.3767572663138964D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4794 residual_norm > tol_residual_norm 4798 3.6431378286258243D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4798 1.1615416984796637D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4798 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4800 8.801486 2.300E+04 -17.307169 3.341040 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222917 1389 298 -6.6810E+00 8.801486 1.815424 -23.509723 6.077349 -4.968650 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084704 6.032536 3.341040 -22.303745 -9.273240 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4935343760305901 rel_E_err 1.9699540406551484D-12 save LOGS/profile34.data for model 4800 save photos/x800 for model 4800 check gamma integral 4.8248178426608494E-002 residual_norm > tol_residual_norm 4804 2.9065970116122639D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4804 9.7018653870642346D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4804 residual_norm > tol_residual_norm 4808 2.8717842136711758D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4808 9.6459899607932845D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4808 residual_norm > tol_residual_norm 4809 2.0301617777938556D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4809 7.7308925289072045D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4809 4810 8.801487 2.299E+04 -15.832298 3.341057 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222916 1389 301 -6.7923E+00 8.801487 1.815713 -23.508723 6.077355 -4.968569 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084705 6.032631 3.341057 -22.303704 -9.273507 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4932708721465842 rel_E_err 1.9013323012416826D-12 check gamma integral 4.8248263902684045E-002 residual_norm > tol_residual_norm 4813 3.8403593540831696D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4813 1.2320242330553090D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4813 max_residual > tol_max_residual 4813 1.0111457782757261D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4813 max_residual > tol_max_residual 4820 6.0553353308957780D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4820 4820 8.801487 2.299E+04 -17.013326 3.341066 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222916 1389 304 -6.9036E+00 8.801487 1.815874 -23.508175 6.077358 -4.968524 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084706 6.032683 3.341066 -22.303681 -9.273656 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4930092203773819 rel_E_err 1.9469155662083660D-12 check gamma integral 4.8248311081605384E-002 max_residual > tol_max_residual 4823 6.4325110576010147D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4823 max_residual > tol_max_residual 4827 6.3720317263731577D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4827 residual_norm > tol_residual_norm 4830 3.6380297756129751D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4830 4.9672986121767104D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4830 4830 8.801487 2.299E+04 -14.988295 3.341075 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 307 -7.0148E+00 8.801487 1.816031 -23.507649 6.077361 -4.968482 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084706 6.032734 3.341075 -22.303660 -9.273801 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4927472794112582 rel_E_err 1.9990812521506634D-12 check gamma integral 4.8248356539924354E-002 residual_norm > tol_residual_norm 4833 1.0642968042864485D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4833 7.0931418854242728D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4833 residual_norm > tol_residual_norm 4836 1.1143686113051134D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4836 7.4269790662466792D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4836 residual_norm > tol_residual_norm 4839 1.1613726608884212D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4839 7.7403631586493687D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4839 4840 8.801487 2.299E+04 -16.527201 3.341082 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 310 -7.1261E+00 8.801487 1.816138 -23.507297 6.077363 -4.968454 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084707 6.032768 3.341082 -22.303646 -9.273899 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4924889014849327 rel_E_err 1.9801567916060398D-12 check gamma integral 4.8248387120540311E-002 residual_norm > tol_residual_norm 4843 1.1532769205400639D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4843 7.6863852831775728D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4843 residual_norm > tol_residual_norm 4846 1.1979552691940377D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4846 7.9842636118528196D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4846 residual_norm > tol_residual_norm 4849 1.2393036761238408D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4849 8.2599407300569166D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4849 4850 8.801488 2.298E+04 -15.854215 3.341086 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 313 -7.2374E+00 8.801488 1.816220 -23.507026 6.077364 -4.968432 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084707 6.032794 3.341086 -22.303635 -9.273974 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4922272407240902 rel_E_err 1.9243707736334955D-12 save photos/x850 for model 4850 check gamma integral 4.8248410655877427E-002 residual_norm > tol_residual_norm 4852 1.2772690704646139D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4852 8.5130627621526692D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4852 residual_norm > tol_residual_norm 4856 1.2705408285497621D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4856 8.4682029207940671D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4856 residual_norm > tol_residual_norm 4859 1.3060577994152124D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4859 8.7050009111252311D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4859 4860 8.801488 2.298E+04 -19.659857 3.341090 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 316 -7.3487E+00 8.801488 1.816279 -23.506834 6.077365 -4.968418 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084707 6.032813 3.341090 -22.303627 -9.274028 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4919642399644131 rel_E_err 1.9850936070716366D-12 check gamma integral 4.8248427469818812E-002 residual_norm > tol_residual_norm 4863 1.2997271874921133D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4863 8.6627922318658984D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4863 residual_norm > tol_residual_norm 4866 1.3328232729754106D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4866 8.8834497975026280D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4866 residual_norm > tol_residual_norm 4870 1.3268936709770782D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4870 8.8439148440869197D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4870 4870 8.801488 2.298E+04 -13.769414 3.341093 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 319 -7.4600E+00 8.801488 1.816331 -23.506663 6.077366 -4.968405 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084707 6.032829 3.341093 -22.303621 -9.274076 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4917027242808452 rel_E_err 2.0038535067732778D-12 check gamma integral 4.8248442353441806E-002 residual_norm > tol_residual_norm 4873 1.3576261865334087D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4873 9.0488140806474146D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4873 residual_norm > tol_residual_norm 4877 1.3520955332608139D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4877 9.0119391273684998D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4877 4880 8.801488 2.298E+04 -17.829863 3.341096 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 321 -7.2702E+00 8.801488 1.816378 -23.506513 6.077367 -4.968394 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084707 6.032844 3.341096 -22.303615 -9.274119 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4914396951842193 rel_E_err 1.8909649868973936D-12 check gamma integral 4.8248455494259754E-002 residual_norm > tol_residual_norm 4881 1.3464240534286226D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4881 8.9741252284041326D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4881 residual_norm > tol_residual_norm 4885 1.3406099261839626D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4885 8.9353602173470659D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4885 residual_norm > tol_residual_norm 4886 1.4296079769142880D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4886 9.5287282992693789D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4886 4890 8.801488 2.298E+04 -16.732603 3.341098 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222915 1389 324 -7.3815E+00 8.801488 1.816417 -23.506386 6.077367 -4.968384 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084707 6.032856 3.341098 -22.303610 -9.274155 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4911796887215774 rel_E_err 1.9349026468776942D-12 check gamma integral 4.8248466606339607E-002 residual_norm > tol_residual_norm 4892 1.3648120651564761D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4892 9.0967194703334461D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4892 residual_norm > tol_residual_norm 4894 1.4216290197220001D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4894 9.4755293813443220D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4894 residual_norm > tol_residual_norm 4896 1.4655100528607331D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4896 9.7680929624376286D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4896 residual_norm > tol_residual_norm 4899 1.4818979463301242D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4899 9.8773540818277494D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4899 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4900 8.801488 2.298E+04 -16.133948 3.341099 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222914 1389 328 -7.7938E+00 8.801488 1.816444 -23.506298 6.077368 -4.968377 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084707 6.032865 3.341099 -22.303606 -9.274180 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4909215774374989 rel_E_err 1.9223960469863990D-12 save LOGS/profile35.data for model 4900 save photos/x900 for model 4900 check gamma integral 4.8248474376327274E-002 residual_norm > tol_residual_norm 4903 1.4788913716056769D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4903 9.8573082066261072D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4903 residual_norm > tol_residual_norm 4907 1.4757907430283444D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4907 9.8366352401203463D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4907 residual_norm > tol_residual_norm 4910 1.4911878081518074D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4910 9.9392903241394548D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4910 4910 8.801488 2.298E+04 -15.854109 3.341101 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222914 1389 331 -7.9051E+00 8.801488 1.816464 -23.506233 6.077368 -4.968372 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084708 6.032871 3.341101 -22.303604 -9.274199 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4906633518150558 rel_E_err 1.8466982057127120D-12 check gamma integral 4.8248480041628253E-002 residual_norm > tol_residual_norm 4914 1.4883594375709882D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4914 9.9204326024800990D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4914 residual_norm > tol_residual_norm 4918 1.4854417167884741D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4918 9.9009791506611447D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4918 4920 8.801488 2.298E+04 -20.505584 3.341102 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222914 1389 333 -7.7153E+00 8.801488 1.816484 -23.506172 6.077368 -4.968367 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084708 6.032877 3.341102 -22.303601 -9.274216 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4904028391141004 rel_E_err 1.9421433099006438D-12 check gamma integral 4.8248485400653296E-002 residual_norm > tol_residual_norm 4922 1.4824320661886904D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4922 9.8809127699254748D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4922 residual_norm > tol_residual_norm 4926 1.4793282502509546D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4926 9.8602185542141660D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4926 residual_norm > tol_residual_norm 4929 1.4947335745982817D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4929 9.9629287085434989D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4929 4930 8.801488 2.298E+04 -21.172504 3.341103 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222913 1389 336 -7.8266E+00 8.801488 1.816503 -23.506109 6.077369 -4.968362 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084708 6.032883 3.341103 -22.303599 -9.274234 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4901460528142074 rel_E_err 1.9612323307278944D-12 check gamma integral 4.8248490907443209E-002 residual_norm > tol_residual_norm 4933 1.4919026054165815D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4933 9.9440536594622403D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4933 residual_norm > tol_residual_norm 4937 1.4889819876408836D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4937 9.9245808959420284D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4937 4940 8.801488 2.298E+04 -21.788488 3.341104 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222913 1389 338 -7.6368E+00 8.801488 1.816523 -23.506046 6.077369 -4.968358 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084708 6.032889 3.341104 -22.303596 -9.274252 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4898849051233354 rel_E_err 1.9999040539675846D-12 check gamma integral 4.8248496498255952E-002 residual_norm > tol_residual_norm 4941 1.4859695065029270D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4941 9.9044956439463663D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4941 residual_norm > tol_residual_norm 4947 1.4372997096707435D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4947 9.5800033047948874D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4947 residual_norm > tol_residual_norm 4948 1.4985968297082591D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4948 9.9886836720761679D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4948 4950 8.801488 2.298E+04 -20.467030 3.341105 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222913 1389 341 -7.7481E+00 8.801488 1.816545 -23.505974 6.077370 -4.968352 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084708 6.032896 3.341105 -22.303593 -9.274273 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4896250750720998 rel_E_err 2.0171829090183315D-12 save photos/x950 for model 4950 check gamma integral 4.8248502797347506E-002 residual_norm > tol_residual_norm 4952 1.4957626813830389D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4952 9.9697874331880418D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4952 max_residual > tol_max_residual 4957 3.9351435978920296D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4957 4960 8.801488 2.298E+04 -13.391140 3.341107 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222913 1389 343 -7.5584E+00 8.801488 1.816568 -23.505902 6.077370 -4.968347 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084708 6.032903 3.341107 -22.303591 -9.274293 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4893656341452584 rel_E_err 1.9470801255732191D-12 check gamma integral 4.8248509082549310E-002 max_residual > tol_max_residual 4961 3.9443933724854642D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4961 4970 8.801488 2.297E+04 -15.925361 3.341109 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222912 1389 344 -7.0676E+00 8.801488 1.816615 -23.505752 6.077371 -4.968337 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084708 6.032918 3.341109 -22.303585 -9.274337 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4891071856552998 rel_E_err 1.9395103413690128D-12 check gamma integral 4.8248522375961118E-002 residual_norm > tol_residual_norm 4979 3.9109503980498574D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4979 1.0918370805961243D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4979 4980 8.801488 2.297E+04 -16.602929 3.341123 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222912 1389 345 -6.5768E+00 8.801488 1.816856 -23.504998 6.077374 -4.968281 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084709 6.032995 3.341123 -22.303556 -9.274558 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4888459173204751 rel_E_err 2.0588167210368242D-12 check gamma integral 4.8248589022027291E-002 residual_norm > tol_residual_norm 4983 3.8970543609631222D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4983 1.0837411096513649D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4983 residual_norm > tol_residual_norm 4987 3.8809333816788074D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4987 1.0756903801648290D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4987 4990 8.801489 2.296E+04 -17.102671 3.341144 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222911 1389 347 -6.3870E+00 8.801489 1.817208 -23.503922 6.077380 -4.968203 0.000000 0.000000 0.044508 0.902559 0.595839 16 2.8768E+05 4.084710 6.033103 3.341144 -22.303515 -9.274879 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4885868578186994 rel_E_err 1.8514704594948737D-12 check gamma integral 4.8248685054584080E-002 residual_norm > tol_residual_norm 4991 3.8659851012856398D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4991 1.0676826405484081D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4991 residual_norm > tol_residual_norm 4994 4.2292107942223835D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4994 1.1677232741150875D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4994 residual_norm > tol_residual_norm 4998 4.2069119510281115D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4998 1.1582617920834747D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4998 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5000 8.801489 2.295E+04 -20.853689 3.341162 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222910 1389 350 -6.4983E+00 8.801489 1.817519 -23.502997 6.077384 -4.968132 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084711 6.033198 3.341162 -22.303481 -9.275162 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4883238584095952 rel_E_err 2.0519051774048446D-12 save LOGS/profile36.data for model 5000 save photos/5000 for model 5000 check gamma integral 4.8248768427193646E-002 residual_norm > tol_residual_norm 5003 7.6091659151009799D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5003 1.2107903250717685D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5003 residual_norm > tol_residual_norm 5003 1.2275657143276188D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5003 8.1815882743278515D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5003 residual_norm > tol_residual_norm 5010 4.1363907561806720D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5010 1.1272522502487090D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5010 5010 8.801489 2.295E+04 -14.260814 3.341180 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222909 1389 353 -6.6096E+00 8.801489 1.817830 -23.502092 6.077389 -4.968066 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084712 6.033292 3.341180 -22.303448 -9.275444 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4880631619348383 rel_E_err 1.9609032067470345D-12 check gamma integral 4.8248850646625839E-002 residual_norm > tol_residual_norm 5014 4.1188497332528242D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5014 1.1180649385936095D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5014 residual_norm > tol_residual_norm 5018 6.1583995981105156D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5018 1.1089339644074526D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5018 residual_norm > tol_residual_norm 5018 1.2546433844103119D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5018 8.3620955028828395D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5018 5020 8.801490 2.294E+04 -17.848383 3.341198 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222908 1389 356 -6.7209E+00 8.801490 1.818148 -23.501193 6.077393 -4.968002 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084713 6.033386 3.341198 -22.303416 -9.275731 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4877996004212877 rel_E_err 1.9686375506420260D-12 check gamma integral 4.8248933136852044E-002 residual_norm > tol_residual_norm 5025 4.4394134835968255D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5025 1.1993793850409401D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5025 residual_norm > tol_residual_norm 5030 4.0215001899049921D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5030 1.0729050806688233D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5030 residual_norm > tol_residual_norm 5030 1.2051004388123196D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5030 8.0317634272649846D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5030 5030 8.801490 2.293E+04 -14.739000 3.341218 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222908 1389 359 -6.8322E+00 8.801490 1.818488 -23.500256 6.077397 -4.967938 0.000000 0.000000 0.044508 0.902559 0.595839 10 2.8768E+05 4.084714 6.033484 3.341218 -22.303383 -9.276037 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4875397124981315 rel_E_err 1.8873446509336964D-12 check gamma integral 4.8249019825577888E-002 residual_norm > tol_residual_norm 5038 5.6694306780336772D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5038 1.1351275731904151D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5038 residual_norm > tol_residual_norm 5038 6.4617789341035224D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5038 8.5974141047590646D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5038 5040 8.801490 2.293E+04 -15.610875 3.341235 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222907 1389 361 -6.6424E+00 8.801490 1.818797 -23.499426 6.077401 -4.967886 0.000000 0.000000 0.044508 0.902559 0.595839 12 2.8768E+05 4.084715 6.033573 3.341235 -22.303354 -9.276314 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4872777896066465 rel_E_err 2.0204741141866129D-12 check gamma integral 4.8249097351937442E-002 residual_norm > tol_residual_norm 5045 2.6023688032090442D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5045 6.7055917572611853D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5045 residual_norm > tol_residual_norm 5045 1.2365523879048922D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5045 8.2414356898210556D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5045 5050 8.801490 2.292E+04 -15.756801 3.341253 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222906 1389 363 -6.4527E+00 8.801490 1.819107 -23.498613 6.077404 -4.967838 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084715 6.033660 3.341253 -22.303327 -9.276591 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4870162877998174 rel_E_err 1.9739034851491813D-12 save photos/x050 for model 5050 check gamma integral 4.8249173930601540E-002 residual_norm > tol_residual_norm 5052 2.8144551080020516D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5052 7.1446165392799549D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5052 residual_norm > tol_residual_norm 5052 1.2748810287595432D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5052 8.4969709144977146D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5052 residual_norm > tol_residual_norm 5060 2.7804149122728708D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5060 7.0869085234716259D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5060 residual_norm > tol_residual_norm 5060 1.2702733123523883D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5060 8.4662389749625117D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5060 5060 8.801491 2.291E+04 -16.182112 3.341270 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222906 1389 367 -6.8650E+00 8.801491 1.819392 -23.497882 6.077408 -4.967792 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084716 6.033738 3.341270 -22.303302 -9.276844 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4867566575873461 rel_E_err 1.9806504659545582D-12 check gamma integral 4.8249243402468216E-002 residual_norm > tol_residual_norm 5067 2.9940162922635775D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5067 7.5288831629580499D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5067 5070 8.801491 2.290E+04 -16.816254 3.341288 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 368 -6.3742E+00 8.801491 1.819707 -23.497093 6.077411 -4.967753 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084716 6.033824 3.341288 -22.303277 -9.277123 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4864958242036268 rel_E_err 1.8740152457380830D-12 check gamma integral 4.8249318970656783E-002 residual_norm > tol_residual_norm 5071 2.9844624798226735D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5071 7.5192522704447498D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5071 residual_norm > tol_residual_norm 5071 1.2684650182609026D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5071 8.4541669453784524D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5071 residual_norm > tol_residual_norm 5072 1.2377823246543498D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5072 8.2496255759162973D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5072 residual_norm > tol_residual_norm 5075 1.2805718801393260D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5075 8.5349115248631521D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5075 residual_norm > tol_residual_norm 5078 1.3195623391862042D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5078 8.7948678690141599D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5078 5080 8.801491 2.290E+04 -15.249967 3.341293 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 373 -7.0875E+00 8.801491 1.819798 -23.496869 6.077412 -4.967737 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084717 6.033848 3.341293 -22.303269 -9.277204 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4862390117435007 rel_E_err 1.9288138999959848D-12 check gamma integral 4.8249340570016827E-002 residual_norm > tol_residual_norm 5082 1.3200851191868152D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5082 8.7983518371241354D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5082 residual_norm > tol_residual_norm 5086 1.3206269305045606D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5086 8.8019626583884583D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5086 5090 8.801491 2.290E+04 -16.296331 3.341298 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 375 -6.8978E+00 8.801491 1.819891 -23.496642 6.077413 -4.967726 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084717 6.033873 3.341298 -22.303262 -9.277285 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4859793159962846 rel_E_err 1.9957900330022785D-12 check gamma integral 4.8249362529043806E-002 residual_norm > tol_residual_norm 5091 1.2795447081426030D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5091 8.5280566919154893D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5091 residual_norm > tol_residual_norm 5094 1.3234592543661900D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5094 8.8208427893860103D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5094 residual_norm > tol_residual_norm 5097 1.3634741189090873D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5097 9.0876290762814879D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5097 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5100 8.801491 2.290E+04 -16.228776 3.341303 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 378 -7.0090E+00 8.801491 1.819978 -23.496429 6.077414 -4.967715 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084717 6.033896 3.341303 -22.303255 -9.277363 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4857213762610213 rel_E_err 1.9890430513396351D-12 save LOGS/profile37.data for model 5100 save photos/x100 for model 5100 check gamma integral 4.8249383150784982E-002 residual_norm > tol_residual_norm 5101 1.3637613072140043D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5101 9.0895423207310061D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5101 residual_norm > tol_residual_norm 5105 1.3642840135310828D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5105 9.0930257764607739D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5105 residual_norm > tol_residual_norm 5110 1.3215725048390954D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5110 8.8082570356968537D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5110 5110 8.801491 2.290E+04 -14.409547 3.341308 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 381 -7.1203E+00 8.801491 1.820068 -23.496211 6.077415 -4.967704 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084717 6.033920 3.341308 -22.303248 -9.277442 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4854632902049314 rel_E_err 1.9424724229124664D-12 check gamma integral 4.8249404297367432E-002 residual_norm > tol_residual_norm 5114 1.3222846671204726D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5114 8.8130031710106402D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5114 residual_norm > tol_residual_norm 5118 1.3235067522393544D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5118 8.8211490243316704D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5118 5120 8.801491 2.289E+04 -15.412780 3.341315 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222905 1389 383 -6.9306E+00 8.801491 1.820180 -23.495942 6.077416 -4.967691 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084717 6.033949 3.341315 -22.303240 -9.277540 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4852066920601406 rel_E_err 1.9827897509960771D-12 check gamma integral 4.8249430421103599E-002 residual_norm > tol_residual_norm 5123 1.2721892320716892D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5123 8.4790014691113816D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5123 residual_norm > tol_residual_norm 5127 1.2735851735555239D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5127 8.4883058152211407D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5127 5130 8.801491 2.289E+04 -15.611579 3.341323 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222904 1389 385 -6.7408E+00 8.801491 1.820331 -23.495584 6.077417 -4.967675 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084718 6.033988 3.341323 -22.303228 -9.277673 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4849469840173537 rel_E_err 1.9664982587990319D-12 check gamma integral 4.8249465449751033E-002 residual_norm > tol_residual_norm 5131 1.2750241995998756D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5131 8.4979131570310493D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5131 residual_norm > tol_residual_norm 5135 1.2765091748781114D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5135 8.5077952068243465D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5135 residual_norm > tol_residual_norm 5138 1.3364203333551787D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5138 8.9072334332846378D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5138 5140 8.801491 2.289E+04 -15.701741 3.341332 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222904 1389 388 -6.8521E+00 8.801491 1.820475 -23.495246 6.077419 -4.967660 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084718 6.034025 3.341332 -22.303218 -9.277799 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4846912361057170 rel_E_err 1.9760427688487947D-12 check gamma integral 4.8249498558757799E-002 residual_norm > tol_residual_norm 5142 1.3375724066904110D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5142 8.9149120211213961D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5142 residual_norm > tol_residual_norm 5150 3.5276239654679157D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5150 8.9473071552201758D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5150 5150 8.801492 2.288E+04 -22.033703 3.341344 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222904 1389 390 -6.6623E+00 8.801492 1.820693 -23.494741 6.077421 -4.967640 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084718 6.034081 3.341344 -22.303202 -9.277990 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4844340557501106 rel_E_err 1.9757136472857546D-12 save photos/x150 for model 5150 check gamma integral 4.8249548407529458E-002 residual_norm > tol_residual_norm 5151 1.1946689201857978D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5151 7.9621256929037057D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5151 residual_norm > tol_residual_norm 5155 1.1817911885028247D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5155 7.8762636688042065D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5155 residual_norm > tol_residual_norm 5159 1.1188135367344391D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5159 7.4672322645862155D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5159 5160 8.801492 2.288E+04 -21.262136 3.341355 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222904 1391 393 -6.7736E+00 8.801492 1.820875 -23.494321 6.077422 -4.967630 0.000000 0.000000 0.044508 0.902559 0.595838 10 2.8768E+05 4.084719 6.034124 3.341355 -22.303190 -9.278147 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4841757288112634 rel_E_err 1.9584347918747104D-12 check gamma integral 4.8249589550912970E-002 residual_norm > tol_residual_norm 5162 4.5357512130095713D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5162 2.0033635193336069D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5162 5170 8.801492 2.287E+04 -15.801272 3.341371 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222903 1391 394 -6.2828E+00 8.801492 1.821162 -23.493676 6.077425 -4.967608 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084719 6.034196 3.341371 -22.303170 -9.278397 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4839201645674436 rel_E_err 1.9964482721330040D-12 check gamma integral 4.8249653991188780E-002 residual_norm > tol_residual_norm 5172 1.9174123206825555D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5172 1.0952482212507345D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5172 max_residual > tol_max_residual 5175 4.2463893994249456D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5175 residual_norm > tol_residual_norm 5179 2.7614288930786492D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5179 1.2128717749306443D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5179 5180 8.801492 2.286E+04 -16.027135 3.341398 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222902 1391 397 -6.3941E+00 8.801492 1.821632 -23.492650 6.077429 -4.967578 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084720 6.034309 3.341398 -22.303140 -9.278804 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4836637277359497 rel_E_err 1.8656226547822229D-12 check gamma integral 4.8249757579951445E-002 residual_norm > tol_residual_norm 5183 2.8553072341719936D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5183 1.1867200265979641D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5183 residual_norm > tol_residual_norm 5185 1.3773239900557546D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5185 5.4163131255090174D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5185 residual_norm > tol_residual_norm 5190 1.3396586525584268D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5190 4.4784037867952133D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5190 5190 8.801492 2.285E+04 -14.494295 3.341422 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222902 1392 400 -6.5054E+00 8.801492 1.822051 -23.491763 6.077432 -4.967564 0.000000 0.000000 0.044508 0.902559 0.595838 13 2.8768E+05 4.084720 6.034405 3.341422 -22.303115 -9.279162 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4834076575598649 rel_E_err 1.8769773299124964D-12 check gamma integral 4.8249848086129303E-002 max_residual > tol_max_residual 5194 4.3499563243157915D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5194 max_residual > tol_max_residual 5198 4.2520355509381338D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5198 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5200 8.801493 2.284E+04 -16.176814 3.341448 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222901 1392 402 -6.3156E+00 8.801493 1.822501 -23.490841 6.077435 -4.967555 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084721 6.034505 3.341448 -22.303089 -9.279546 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4831453771890324 rel_E_err 1.9329279067680179D-12 save LOGS/profile38.data for model 5200 save photos/x200 for model 5200 check gamma integral 4.8249943525672044E-002 max_residual > tol_max_residual 5202 4.1302321629103460D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5202 max_residual > tol_max_residual 5205 4.7220979009126959D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5205 max_residual > tol_max_residual 5209 4.5865127480939002D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5209 5210 8.801493 2.283E+04 -14.599196 3.341473 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222901 1392 405 -6.4269E+00 8.801493 1.822931 -23.489989 6.077438 -4.967555 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084722 6.034598 3.341473 -22.303065 -9.279910 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4828888084828966 rel_E_err 1.8702303463667929D-12 check gamma integral 4.8250032935973838E-002 max_residual > tol_max_residual 5213 4.4548908520750795D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5213 max_residual > tol_max_residual 5217 4.3271478526308596D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5217 5220 8.801493 2.282E+04 -14.797382 3.341500 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222900 1393 407 -6.2372E+00 8.801493 1.823395 -23.489092 6.077442 -4.967568 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084722 6.034692 3.341500 -22.303041 -9.280300 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4826324216829549 rel_E_err 1.9207504258476563D-12 check gamma integral 4.8250128078457827E-002 max_residual > tol_max_residual 5221 4.2184510085557174D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5221 max_residual > tol_max_residual 5224 4.8209725926060432D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5224 max_residual > tol_max_residual 5228 4.6825674049206949D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5228 5230 8.801493 2.281E+04 -14.697204 3.341524 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222900 1393 410 -6.3484E+00 8.801493 1.823806 -23.488325 6.077444 -4.967584 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084723 6.034774 3.341524 -22.303021 -9.280644 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4823714118579510 rel_E_err 1.9783466078966644D-12 check gamma integral 4.8250210768585509E-002 max_residual > tol_max_residual 5232 4.5697061048703642D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5232 max_residual > tol_max_residual 5236 4.4385626703198379D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5236 max_residual > tol_max_residual 5239 5.0678855513535792D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5239 5240 8.801493 2.280E+04 -18.912421 3.341548 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222899 1393 413 -6.4597E+00 8.801493 1.824227 -23.487562 6.077447 -4.967610 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084723 6.034855 3.341548 -22.303001 -9.280993 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4821153085212631 rel_E_err 1.8861927139744721D-12 check gamma integral 4.8250294449538281E-002 max_residual > tol_max_residual 5243 4.9224061380015817D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5243 max_residual > tol_max_residual 5247 4.7810970323955648D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5247 5250 8.801494 2.279E+04 -17.026202 3.341573 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222899 1393 415 -6.2700E+00 8.801494 1.824653 -23.486813 6.077449 -4.967642 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084724 6.034933 3.341573 -22.302982 -9.281344 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4818591892227486 rel_E_err 1.9051171730601292D-12 save photos/x250 for model 5250 check gamma integral 4.8250378121105886E-002 max_residual > tol_max_residual 5251 4.6586096416190277D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5251 residual_norm > tol_residual_norm 5254 1.3198412602247401D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5254 5.3142372454329172D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5254 residual_norm > tol_residual_norm 5258 1.2841759741715015D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5258 5.1618208736371365D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5258 5260 8.801494 2.278E+04 -15.796844 3.341595 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222899 1393 418 -6.3812E+00 8.801494 1.825029 -23.486170 6.077451 -4.967680 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084724 6.034999 3.341595 -22.302967 -9.281653 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4816011628956698 rel_E_err 1.9831188599250791D-12 check gamma integral 4.8250451049557823E-002 residual_norm > tol_residual_norm 5262 1.9280533843618373D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5262 5.0310658026012554D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5262 residual_norm > tol_residual_norm 5266 1.2182289358534091D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5266 4.8866279130915104D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5266 residual_norm > tol_residual_norm 5269 1.3838322869283706D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5269 5.5691467005132569D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5269 5270 8.801494 2.277E+04 -15.903908 3.341617 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222898 1393 421 -6.4925E+00 8.801494 1.825414 -23.485528 6.077453 -4.967726 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084725 6.035064 3.341617 -22.302951 -9.281966 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4813490400014686 rel_E_err 1.8881674373367754D-12 check gamma integral 4.8250524778183083E-002 residual_norm > tol_residual_norm 5273 1.3465983994787974D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5273 5.4096448060958195D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5273 residual_norm > tol_residual_norm 5277 1.3123052077225717D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5277 5.2688285200708757D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5277 5280 8.801494 2.276E+04 -15.867477 3.341640 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222898 1393 423 -6.3028E+00 8.801494 1.825804 -23.484895 6.077455 -4.967776 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084725 6.035127 3.341640 -22.302936 -9.282282 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4810926104181741 rel_E_err 1.9620551110214072D-12 check gamma integral 4.8250598522604576E-002 residual_norm > tol_residual_norm 5281 1.2768677602572367D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5281 5.1176934664011978D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5281 residual_norm > tol_residual_norm 5285 1.2460482240669472D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5285 4.9953499020865863D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5285 residual_norm > tol_residual_norm 5288 1.4147881073517666D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5288 5.6908349804526796D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5288 5290 8.801494 2.275E+04 -18.855524 3.341661 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222898 1393 426 -6.4140E+00 8.801494 1.826174 -23.484310 6.077457 -4.967833 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084725 6.035184 3.341661 -22.302923 -9.282580 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4808366370496922 rel_E_err 2.0390694346096381D-12 check gamma integral 4.8250667591014609E-002 residual_norm > tol_residual_norm 5292 1.3766316815420796D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5292 5.5279224591627242D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5292 residual_norm > tol_residual_norm 5296 1.3394740574598087D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5296 5.3695286873343809D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5296 residual_norm > tol_residual_norm 5300 1.3032991586925153D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5300 5.2155655728629784D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5300 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5300 8.801494 2.274E+04 -16.685601 3.341683 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222897 1393 429 -6.5253E+00 8.801494 1.826552 -23.483727 6.077458 -4.967898 0.000000 0.000000 0.044508 0.902559 0.595838 13 2.8768E+05 4.084726 6.035240 3.341683 -22.302910 -9.282882 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4805820333756632 rel_E_err 1.9824606138725790D-12 save LOGS/profile39.data for model 5300 save photos/x300 for model 5300 check gamma integral 4.8250737093770001E-002 residual_norm > tol_residual_norm 5303 1.4781327957138107D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5303 5.9360953799413280D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5303 residual_norm > tol_residual_norm 5307 1.4404099731924182D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5307 5.7803423943886149D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5307 max_residual > tol_max_residual 5308 5.6571472646136968D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5308 residual_norm > tol_residual_norm 5309 1.1785485995366752D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5309 7.8778920842314790D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5309 5310 8.801494 2.274E+04 -16.398045 3.341700 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222897 1393 433 -6.9376E+00 8.801494 1.826830 -23.483307 6.077459 -4.967952 0.000000 0.000000 0.044508 0.902559 0.595838 14 2.8768E+05 4.084726 6.035279 3.341700 -22.302900 -9.283104 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4803289698070357 rel_E_err 1.9579410953151134D-12 check gamma integral 4.8250787787461565E-002 residual_norm > tol_residual_norm 5311 1.4115417250949452D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5311 9.4357747832220479D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5311 5320 8.801494 2.273E+04 -15.960690 3.341710 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222897 1393 434 -6.4468E+00 8.801494 1.827008 -23.483042 6.077460 -4.967981 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084726 6.035304 3.341710 -22.302894 -9.283245 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4800717729336750 rel_E_err 1.9357254243558303D-12 check gamma integral 4.8250819873071164E-002 residual_norm > tol_residual_norm 5322 1.4957894561129957D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5322 6.0010170927241591D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5322 residual_norm > tol_residual_norm 5326 1.4575950089437587D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5326 5.8434091744492531D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5326 residual_norm > tol_residual_norm 5330 1.4183266958496018D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5330 5.6764038099013349D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5330 5330 8.801495 2.272E+04 -18.501821 3.341731 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222897 1393 437 -6.5581E+00 8.801495 1.827355 -23.482535 6.077462 -4.968054 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084726 6.035350 3.341731 -22.302883 -9.283520 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4798164672326815 rel_E_err 1.9105476635566982D-12 check gamma integral 4.8250881885336987E-002 residual_norm > tol_residual_norm 5334 1.3835850987023605D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5334 5.5374678065357924D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5334 residual_norm > tol_residual_norm 5337 1.5669758584186101D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5337 6.2948107434236608D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5337 5340 8.801495 2.272E+04 -18.750125 3.341751 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222897 1393 439 -6.3684E+00 8.801495 1.827707 -23.482033 6.077463 -4.968128 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084727 6.035395 3.341751 -22.302872 -9.283796 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4795602485704960 rel_E_err 2.0091194154534846D-12 check gamma integral 4.8250943985566071E-002 residual_norm > tol_residual_norm 5341 1.5249287261988965D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5341 6.1156517638832932D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5341 residual_norm > tol_residual_norm 5345 1.4839359196298065D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5345 5.9412849953975555D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5345 residual_norm > tol_residual_norm 5349 1.4439807831954922D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5349 5.7716348686997133D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5349 5350 8.801495 2.271E+04 -15.944949 3.341771 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 442 -6.4796E+00 8.801495 1.828041 -23.481567 6.077464 -4.968209 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084727 6.035435 3.341771 -22.302862 -9.284057 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4793027609352496 rel_E_err 1.9179528853021997D-12 save photos/x350 for model 5350 check gamma integral 4.8251002281276746E-002 residual_norm > tol_residual_norm 5353 1.4085113704914562D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5353 5.6297483827771076D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5353 residual_norm > tol_residual_norm 5356 1.5945263167076711D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5356 6.3973702243933492D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5356 residual_norm > tol_residual_norm 5360 1.5517826594930555D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5360 6.2155153248881795D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5360 5360 8.801495 2.270E+04 -18.435170 3.341791 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 445 -6.5909E+00 8.801495 1.828383 -23.481101 6.077465 -4.968297 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084727 6.035474 3.341791 -22.302852 -9.284323 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4790467955373989 rel_E_err 1.9811441248878735D-12 check gamma integral 4.8251061125704084E-002 residual_norm > tol_residual_norm 5364 1.5101009478980348D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5364 6.0384963414047865D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5364 residual_norm > tol_residual_norm 5368 1.4694685774516281D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5368 5.8662242047924612D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5368 5370 8.801495 2.269E+04 -22.125967 3.341812 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 447 -6.4012E+00 8.801495 1.828728 -23.480641 6.077467 -4.968384 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084727 6.035512 3.341812 -22.302843 -9.284590 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4787917471314564 rel_E_err 1.9042943602076057D-12 check gamma integral 4.8251119889943857E-002 residual_norm > tol_residual_norm 5371 1.6649911283534992D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5371 6.6817956889968555D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5371 residual_norm > tol_residual_norm 5375 1.6204775020467254D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5375 6.4925202144070215D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5375 residual_norm > tol_residual_norm 5379 1.5770871441710721D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5379 6.3081938901560108D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5379 5380 8.801495 2.268E+04 -16.191946 3.341830 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 450 -6.5125E+00 8.801495 1.829034 -23.480241 6.077468 -4.968472 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035543 3.341830 -22.302834 -9.284826 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4785383111016621 rel_E_err 1.9762073074913582D-12 check gamma integral 4.8251171558364440E-002 residual_norm > tol_residual_norm 5383 1.5347676528613720D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5383 6.1287388402194165D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5383 residual_norm > tol_residual_norm 5387 1.4935053614184481D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5387 5.9540762320779844D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5387 residual_norm > tol_residual_norm 5390 1.6903850881744713D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5390 6.7721418364453209D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5390 5390 8.801495 2.267E+04 -18.827217 3.341850 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 453 -6.6237E+00 8.801495 1.829369 -23.479813 6.077469 -4.968572 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035576 3.341850 -22.302826 -9.285083 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4782846724839747 rel_E_err 1.9306240420466184D-12 check gamma integral 4.8251227456364607E-002 residual_norm > tol_residual_norm 5394 1.6452961388760717D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5394 6.5805961478489577D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5394 residual_norm > tol_residual_norm 5398 1.6012970409942332D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5398 6.3940257443357823D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5398 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5400 8.801495 2.267E+04 -16.008162 3.341869 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 455 -6.4340E+00 8.801495 1.829686 -23.479417 6.077470 -4.968665 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035605 3.341869 -22.302817 -9.285324 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4780320305699828 rel_E_err 1.9141679890410667D-12 save LOGS/profile40.data for model 5400 save photos/x400 for model 5400 check gamma integral 4.8251279664005525E-002 residual_norm > tol_residual_norm 5402 1.5611318843012348D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5402 6.2307889182682631D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5402 residual_norm > tol_residual_norm 5406 1.5191899796400676D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5406 6.0533732224636684D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5406 residual_norm > tol_residual_norm 5409 1.7164327929086509D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5409 6.8671065449044513D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5409 5410 8.801495 2.266E+04 -15.637244 3.341888 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222896 1393 458 -6.5453E+00 8.801495 1.830010 -23.479020 6.077471 -4.968771 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035634 3.341888 -22.302809 -9.285570 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4777826254985831 rel_E_err 1.8881674257668608D-12 check gamma integral 4.8251332624783129E-002 residual_norm > tol_residual_norm 5413 1.6707148832876404D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5413 6.6731724819873592D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5413 residual_norm > tol_residual_norm 5417 1.6288044152987242D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5417 6.5023692599981878D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5417 5420 8.801495 2.265E+04 -16.514585 3.341908 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 460 -6.3555E+00 8.801495 1.830339 -23.478626 6.077472 -4.968875 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035660 3.341908 -22.302801 -9.285818 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4775298891068367 rel_E_err 1.8791165962275275D-12 check gamma integral 4.8251385725481218E-002 residual_norm > tol_residual_norm 5421 1.5851840207486593D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5421 6.3178117050201876D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5421 residual_norm > tol_residual_norm 5424 1.7889061145975945D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5424 7.1598206439346973D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5424 residual_norm > tol_residual_norm 5428 1.7414757811504188D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5428 6.9584904254380284D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5428 5430 8.801495 2.264E+04 -16.851055 3.341925 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 463 -6.4668E+00 8.801495 1.830629 -23.478285 6.077473 -4.968978 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084728 6.035683 3.341925 -22.302795 -9.286036 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4772786552030119 rel_E_err 1.9949672026458421D-12 check gamma integral 4.8251432198419875E-002 residual_norm > tol_residual_norm 5432 1.6978239826980229D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5432 6.7800953791326862D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5432 max_residual > tol_max_residual 5436 4.4583863330946542D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5436 residual_norm > tol_residual_norm 5440 1.6083212830559045D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5440 6.4015998919342468D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5440 5440 8.801496 2.263E+04 -16.232079 3.341944 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 466 -6.5781E+00 8.801496 1.830948 -23.477918 6.077474 -4.969095 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084729 6.035705 3.341944 -22.302787 -9.286275 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4770243683756190 rel_E_err 1.9146616672922890D-12 check gamma integral 4.8251482701576087E-002 residual_norm > tol_residual_norm 5443 1.8142930132138950D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5443 7.2522708470410591D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5443 residual_norm > tol_residual_norm 5447 1.7684565273603579D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5447 7.0633090324652703D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5447 5450 8.801496 2.263E+04 -16.921877 3.341963 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 468 -6.3883E+00 8.801496 1.831249 -23.477578 6.077474 -4.969201 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084729 6.035725 3.341963 -22.302781 -9.286499 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4767711986610585 rel_E_err 1.9319405212421494D-12 save photos/x450 for model 5450 check gamma integral 4.8251530067728039E-002 residual_norm > tol_residual_norm 5451 1.7214815609492474D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5451 6.8643999612459233D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5451 residual_norm > tol_residual_norm 5455 1.6756163504850955D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5455 6.6705596001915793D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5455 residual_norm > tol_residual_norm 5458 1.8905417915535750D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5458 7.5663449874004210D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5458 5460 8.801496 2.262E+04 -21.455959 3.341980 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 471 -6.4996E+00 8.801496 1.831536 -23.477261 6.077475 -4.969313 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084729 6.035743 3.341980 -22.302774 -9.286712 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4765180693829913 rel_E_err 1.9367127755960460D-12 check gamma integral 4.8251574654874792E-002 residual_norm > tol_residual_norm 5462 1.8407550511770969D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5462 7.3549505790638570D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5462 residual_norm > tol_residual_norm 5466 1.7921004123117562D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5466 7.1487777918957718D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5466 residual_norm > tol_residual_norm 5470 1.7445690318113256D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5470 6.9477638119234478D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5470 5470 8.801496 2.261E+04 -19.016556 3.341998 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222895 1393 474 -6.6109E+00 8.801496 1.831828 -23.476943 6.077476 -4.969430 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084729 6.035760 3.341998 -22.302768 -9.286928 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4762653871338012 rel_E_err 1.9097248493217079D-12 check gamma integral 4.8251619779850832E-002 residual_norm > tol_residual_norm 5474 1.6999644117450000D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5474 6.7639652796356156D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5474 residual_norm > tol_residual_norm 5477 1.9146681764621228D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5477 7.6522601331521639D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5477 5480 8.801496 2.261E+04 -17.610893 3.342016 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 476 -6.4211E+00 8.801496 1.832125 -23.476627 6.077477 -4.969544 0.000000 0.000000 0.044508 0.902559 0.595838 12 2.8768E+05 4.084729 6.035776 3.342016 -22.302762 -9.287147 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4760127919388495 rel_E_err 1.9474092078872447D-12 check gamma integral 4.8251665173813650E-002 residual_norm > tol_residual_norm 5481 1.8643398562381489D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5481 7.4388517211301339D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5481 residual_norm > tol_residual_norm 5485 1.8169236068331234D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5485 7.2425615382548936D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5485 residual_norm > tol_residual_norm 5489 1.7688049667484016D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5489 7.0392137519764073D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5489 5490 8.801496 2.260E+04 -16.785108 3.342033 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 479 -6.5324E+00 8.801496 1.832407 -23.476331 6.077477 -4.969664 0.000000 0.000000 0.044508 0.902559 0.595838 15 2.8768E+05 4.084729 6.035790 3.342033 -22.302756 -9.287354 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4757598519808237 rel_E_err 1.9811441139537297D-12 check gamma integral 4.8251707965025717E-002 residual_norm > tol_residual_norm 5493 1.7243744110320324D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5493 6.8581614582540223D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5493 residual_norm > tol_residual_norm 5496 1.9414201048926235D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5496 7.7562049947739117D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5496 residual_norm > tol_residual_norm 5500 1.8904754669677842D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5500 7.5402566784555702D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5500 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5500 8.801496 2.259E+04 -21.465910 3.342051 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 482 -6.6437E+00 8.801496 1.832695 -23.476035 6.077478 -4.969789 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035803 3.342051 -22.302751 -9.287564 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4755083409063596 rel_E_err 1.9126869363890078D-12 save LOGS/profile41.data for model 5500 save photos/x500 for model 5500 check gamma integral 4.8251751311292598E-002 residual_norm > tol_residual_norm 5504 1.8406687139440404D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5504 7.3295651825447367D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5504 residual_norm > tol_residual_norm 5508 1.7941053735251888D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5508 7.1381977006031050D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5508 5510 8.801496 2.258E+04 -22.439372 3.342068 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 484 -6.4539E+00 8.801496 1.832987 -23.475742 6.077479 -4.969911 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035815 3.342068 -22.302745 -9.287776 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4752573724888673 rel_E_err 1.9298012297892417D-12 check gamma integral 4.8251794777766477E-002 max_residual > tol_max_residual 5511 5.4225675424684774D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5511 residual_norm > tol_residual_norm 5515 1.9648816665104316D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5515 7.8410762913726006D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5515 residual_norm > tol_residual_norm 5519 1.9163863027060854D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5519 7.6430145365716087D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5519 5520 8.801496 2.258E+04 -16.782469 3.342084 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 487 -6.5652E+00 8.801496 1.833246 -23.475485 6.077479 -4.970029 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035824 3.342084 -22.302740 -9.287964 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4750071272069061 rel_E_err 1.8638124601904044D-12 check gamma integral 4.8251833133237734E-002 residual_norm > tol_residual_norm 5523 1.8659732060227240D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5523 7.4297754473268030D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5523 residual_norm > tol_residual_norm 5527 1.8166991526952677D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5527 7.2217760188576743D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5527 max_residual > tol_max_residual 5530 5.4955670868010495D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5530 5530 8.801496 2.257E+04 -22.308028 3.342102 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 490 -6.6765E+00 8.801496 1.833529 -23.475209 6.077480 -4.970161 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035833 3.342102 -22.302735 -9.288169 49.005210 0.000004 0.000000 0.436424 0.000E+00 retry log_rel_run_E_err -7.4747540129933885 rel_E_err 2.0073092336475313D-12 check gamma integral 4.8251874769318123E-002 max_residual > tol_max_residual 5534 5.3655277604419072D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5534 residual_norm > tol_residual_norm 5538 1.9398181764228570D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5538 7.7296168806748028D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5538 5540 8.801496 2.256E+04 -16.865586 3.342118 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1393 492 -6.4867E+00 8.801496 1.833797 -23.474953 6.077481 -4.970280 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035841 3.342118 -22.302730 -9.288361 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4745041832460926 rel_E_err 1.9131806149825593D-12 check gamma integral 4.8251913797357597E-002 residual_norm > tol_residual_norm 5542 1.8875204882756242D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5542 7.5143148494498532D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5542 residual_norm > tol_residual_norm 5546 1.8377551764287897D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5546 7.3042700107338529D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5546 max_residual > tol_max_residual 5549 5.5681092072845766D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5549 5550 8.801496 2.256E+04 -16.767111 3.342135 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1394 495 -6.5980E+00 8.801496 1.834071 -23.474695 6.077481 -4.970415 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035847 3.342135 -22.302725 -9.288557 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4742561371830414 rel_E_err 2.0091193978331974D-12 save photos/x550 for model 5550 check gamma integral 4.8251953485776156E-002 max_residual > tol_max_residual 5553 5.4366142855591590D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5553 residual_norm > tol_residual_norm 5557 1.9601271044328806D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5557 7.8150699320896813D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5557 5560 8.801496 2.255E+04 -16.951927 3.342152 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1395 497 -6.4082E+00 8.801496 1.834349 -23.474438 6.077482 -4.970543 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035853 3.342152 -22.302720 -9.288756 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4740037901004142 rel_E_err 1.9335861180427028D-12 check gamma integral 4.8251993369183677E-002 residual_norm > tol_residual_norm 5561 1.9087461007489296D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5561 7.5977515014657160D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5561 residual_norm > tol_residual_norm 5564 1.5781662449275298D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5564 5.7730606541335036D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5564 residual_norm > tol_residual_norm 5568 1.6459340668852419D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5568 5.6378546419141966D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5568 5570 8.801496 2.254E+04 -16.840840 3.342168 49.005210 0.000000 0.000000 0.000000 0.097441 -3.222894 1395 500 -6.5195E+00 8.801496 1.834595 -23.474214 6.077482 -4.970667 0.000000 0.000000 0.044508 0.902559 0.595837 12 2.8768E+05 4.084730 6.035858 3.342168 -22.302716 -9.288931 49.005210 0.000004 0.000000 0.436424 0.000E+00 max increase log_rel_run_E_err -7.4737523660627403 rel_E_err 1.8949143950197892D-12 check gamma integral 4.8252028435888744E-002 residual_norm > tol_residual_norm 5572 1.7163892834296210D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5572 5.9855001218338338D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5572 num_retries 501 max_number_retries 500 stopping because of problems -- too many retries terminated evolution: hydro_failed termination code: max_number_retries runtime (minutes), retries, steps 102.98 501 5572 DATE: 2026-11-02 TIME: 22:00:41 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************