DATE: 2026-11-10 TIME: 05:59:12 run inlist_pulses_header DATE: 2026-11-10 TIME: 05:59:12 reading user weak rate file /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number 35ae0c321 [WARNING]: Failed to read colors namelist from "inlist". Namelist colors is not found The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 create rate data for r1216_to_mg24 create rate data for r1216_to_si28 create rate data for ral27pa_aux create rate data for ral27pg_aux create rate data for rmg24ap_aux create rate data for rmg24ap_to_si28 create rate data for rmg24gp_aux create rate data for rmg24gp_to_ne20 create rate data for rne20gp_aux create rate data for rne20gp_to_o16 create rate data for ro16gp_to_c12 create rate data for rsi28gp_aux create rate data for rsi28gp_to_mg24 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r1216_to_mg24_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r1216_to_si28_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/ral27pa_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/ral27pg_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rmg24ap_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rmg24ap_to_si28_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rmg24gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rmg24gp_to_ne20_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rne20gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rne20gp_to_o16_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/ro16gp_to_c12_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rsi28gp_aux_1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/rsi28gp_to_mg24_1.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/eosDT_data/cache/mesa-FreeEOS_70z00x.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/eosDT_data/cache/mesa-FreeEOS_80z00x_CO.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_co_z0.004_x0.03.bin set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 4 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1593 1600 8.568992 1.596E+05 -12.330225 5.862413 51.835765 0.000000 0.000000 0.000000 0.225417 -4.716253 1305 0 1.6187E+00 8.568992 0.316761 -1.369628 4.268729 -99.000000 51.835765 0.000072 0.800235 0.774583 0.153711 4 2.8517E+05 3.058470 6.400492 5.862413 -49.361290 -8.594056 48.978830 0.152930 0.040954 0.000000 -0.164E-07 lgRho_cntr log_rel_run_E_err -10.5865798544827214 rel_E_err 2.5907180177237015D-11 save LOGS/profile2.data for model 1600 save photos/x600 for model 1600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8994029679962400E-002 1610 8.583643 1.619E+05 -15.278815 4.892809 51.835765 0.000000 0.000000 0.000000 0.225417 -4.668818 1294 0 1.0044E+00 8.583643 0.305543 -5.259386 4.376785 -99.000000 51.835765 0.000003 0.800059 0.774583 0.153791 5 2.8536E+05 3.102627 6.402833 4.892809 -46.797538 -8.576790 48.978830 0.152902 0.041187 0.000000 -0.204E-07 lg_XHe_cntr log_rel_run_E_err -11.6198177747573261 rel_E_err 2.3998396544234794D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8840207693481082E-002 1620 8.594002 1.635E+05 -18.775324 3.142436 51.835765 0.000000 0.000000 0.000000 0.225417 -4.635294 1296 0 1.3301E+00 8.594002 0.297874 -6.937970 4.453108 -99.000000 51.835765 0.000000 0.800051 0.774583 0.153813 4 2.8548E+05 3.133872 6.404515 3.142436 -45.036972 -8.564106 48.978830 0.152901 0.041198 0.000000 -0.197E-07 max increase log_rel_run_E_err -11.6180678998683593 rel_E_err 2.4095286809329632D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8729805990209228E-002 1630 8.613002 1.663E+05 -23.700284 -0.557197 51.835765 0.000000 0.000000 0.000000 0.225417 -4.573935 1384 0 1.3624E+00 8.613002 0.284532 -6.200456 4.593075 -99.000000 51.835765 0.000000 0.800051 0.774583 0.153850 5 2.8570E+05 3.191189 6.407737 -0.557198 -41.913328 -8.541094 48.978830 0.152901 0.041198 0.000000 -0.170E-07 lgRho_cntr log_rel_run_E_err -11.5723565931654875 rel_E_err 2.6769693998058243D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8521680595675167E-002 1640 8.631306 1.690E+05 -23.520233 -0.207969 51.835765 0.000000 0.000000 0.000000 0.225417 -4.514932 1578 0 1.3332E+00 8.631306 0.272614 -5.517323 4.728048 -99.000000 51.835765 0.000000 0.800051 0.774583 0.153891 5 2.8591E+05 3.246444 6.410983 -0.207971 -39.030014 -8.519751 48.978830 0.152901 0.041198 0.000000 -0.148E-07 lgRho_cntr log_rel_run_E_err -11.5290879652016010 rel_E_err 2.9574133896027230D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8314170305327260E-002 1650 8.649432 1.725E+05 -23.091790 0.140003 51.823762 0.000000 0.000000 0.000000 0.223711 -4.456535 1626 0 1.3184E+00 8.649432 0.253747 -4.877303 4.862564 -4.182292 51.823762 0.000000 0.800051 0.776289 0.153939 5 2.8614E+05 3.301233 6.409477 0.139998 -36.287365 -8.443289 48.978830 0.152901 0.041198 0.000000 -0.160E-07 lgRho_cntr log_rel_run_E_err -11.5123532448751025 rel_E_err 3.0735958075059582D-12 save photos/x650 for model 1650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8106287025536182E-002 1660 8.667554 1.752E+05 -23.357774 0.482677 51.808603 0.000000 0.000000 0.000000 0.220768 -4.398071 1609 0 1.3242E+00 8.667554 0.241651 -4.264470 4.998989 -4.178015 51.808603 0.000000 0.800051 0.779232 0.154002 5 2.8637E+05 3.356131 6.412160 0.482669 -33.654781 -8.412611 48.978830 0.152901 0.041198 0.000000 -0.132E-07 lgRho_cntr log_rel_run_E_err -11.5091297190772384 rel_E_err 3.0964942716368839D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7892405082594625E-002 1670 8.685651 1.777E+05 -22.632546 0.820163 51.793040 0.000000 0.000000 0.000000 0.218254 -4.339528 1623 0 1.3285E+00 8.685651 0.230610 -3.675816 5.139398 -4.173110 51.793040 0.000000 0.800051 0.781746 0.154084 5 2.8660E+05 3.411112 6.415013 0.820149 -31.130580 -8.385280 48.970093 0.152901 0.041198 0.000000 -0.119E-07 lgRho_cntr log_rel_run_E_err -11.5162881647871362 rel_E_err 3.0458733091169324D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7671519477837994E-002 1680 8.703881 1.802E+05 -25.238946 1.156289 51.775945 0.000000 0.000000 0.000000 0.216001 -4.279222 1656 0 1.4036E+00 8.703881 0.219403 -3.104884 5.289612 -4.047746 51.775945 0.000000 0.800051 0.783999 0.154245 5 2.8684E+05 3.467166 6.416317 1.156265 -28.683628 -8.575807 48.970093 0.152901 0.041198 0.000000 -0.230E-07 max increase log_rel_run_E_err -11.5239599017036340 rel_E_err 2.9925409243770852D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7441083323595507E-002 1690 8.721486 1.821E+05 -25.079184 1.475886 51.760226 0.000000 0.000000 0.000000 0.214633 -4.221121 1705 0 1.3256E+00 8.721486 0.212190 -2.575535 5.448289 -4.163100 51.760226 0.000000 0.800051 0.785367 0.154405 5 2.8707E+05 3.521332 6.420461 1.475848 -26.418451 -8.615306 48.970093 0.152901 0.041198 0.000000 -0.793E-08 lgRho_cntr log_rel_run_E_err -11.5020710928636483 rel_E_err 3.1472330781595289D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7211418834339124E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.737651 1.841E+05 -25.181675 1.765941 51.745810 0.000000 0.000000 0.000000 0.213988 -4.166386 1708 0 1.3125E+00 8.737651 0.204221 -2.107496 5.612815 -4.158224 51.745810 0.000000 0.800051 0.786012 0.154633 5 2.8728E+05 3.571748 6.423093 1.765883 -24.415362 -8.608290 48.970093 0.152901 0.041198 0.000000 -0.745E-08 lgRho_cntr log_rel_run_E_err -11.4909994787748335 rel_E_err 3.2284979964415614D-12 save LOGS/profile3.data for model 1700 save photos/x700 for model 1700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6993837938914707E-002 1710 8.753593 1.859E+05 -23.874558 2.048804 51.731899 0.000000 0.000000 0.000000 0.213734 -4.109917 1715 0 1.2849E+00 8.753593 0.196716 -1.662468 5.798562 -4.153383 51.731899 0.000000 0.800051 0.786266 0.154995 5 2.8748E+05 3.622623 6.425651 2.048719 -22.508922 -8.601948 48.970093 0.152901 0.041198 0.000000 -0.726E-08 lgRho_cntr log_rel_run_E_err -11.5303550076950447 rel_E_err 2.9487977894248623D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6772651683239817E-002 1720 8.769171 1.877E+05 -24.610529 2.321271 51.719058 0.000000 0.000000 0.000000 0.213603 -4.050541 1724 0 1.2339E+00 8.769171 0.189649 -1.243596 6.005409 -4.148640 51.719058 0.000000 0.800051 0.786397 0.155576 5 2.8766E+05 3.674225 6.428082 2.321153 -20.709671 -8.595920 48.970093 0.152901 0.041199 0.000000 -0.750E-08 lgRho_cntr log_rel_run_E_err -11.5059010422031509 rel_E_err 3.1196003313411859D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6549835507872755E-002 1730 8.784212 1.894E+05 -24.106809 2.579816 51.707946 0.000000 0.000000 0.000000 0.213532 -3.987037 1749 0 1.1515E+00 8.784212 0.182862 -0.854226 6.227668 -4.144247 51.707946 0.000000 0.800050 0.786468 0.156467 5 2.8781E+05 3.726787 6.430323 2.579656 -19.029506 -8.589295 48.970093 0.152900 0.041200 0.000000 -0.861E-08 lgRho_cntr log_rel_run_E_err -11.5235483395722227 rel_E_err 2.9953781703744701D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6327952261112172E-002 1740 8.798594 1.911E+05 -23.888147 2.826581 51.699047 0.000000 0.000000 0.000000 0.213490 -3.918737 1764 0 1.0351E+00 8.798594 0.176145 -0.495708 6.456651 -4.140328 51.699047 0.000000 0.800049 0.786510 0.157727 5 2.8794E+05 3.780384 6.432326 2.826374 -17.473412 -8.581032 48.970093 0.152898 0.041202 0.000000 -0.111E-07 lgRho_cntr log_rel_run_E_err -11.5151130865481974 rel_E_err 3.0541257415881055D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6109073265312848E-002 1750 8.812308 1.928E+05 -22.504514 3.075632 51.692431 0.000000 0.000000 0.000000 0.213462 -3.845945 1778 0 8.8941E-01 8.812308 0.169281 -0.165934 6.685001 -4.136927 51.692431 0.000000 0.800047 0.786538 0.159350 4 2.8803E+05 3.834858 6.434077 3.075383 -16.033911 -8.570318 48.970093 0.152895 0.041208 0.000000 -0.157E-07 lgRho_cntr log_rel_run_E_err -11.4973683596200562 rel_E_err 3.1814978961233907D-12 save photos/x750 for model 1750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5893604837576957E-002 1760 8.825461 1.946E+05 -22.184461 3.347057 51.687790 0.000000 0.000000 0.000000 0.213444 -3.769681 1782 0 7.2340E-01 8.825461 0.162138 0.139988 6.908892 -4.134044 51.687790 0.000000 0.800042 0.786556 0.161273 4 2.8809E+05 3.889935 6.435601 3.346787 -14.693076 -8.556844 48.970093 0.152887 0.041221 0.000000 -0.236E-07 lgRho_cntr log_rel_run_E_err -11.4928436215335488 rel_E_err 3.2148179049339791D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5680029541889537E-002 1770 8.838208 1.964E+05 -20.985401 3.652734 51.684653 0.000000 0.000000 0.000000 0.213431 -3.691122 1784 0 5.4545E-01 8.838208 0.154643 0.427691 7.127345 -4.131626 51.684653 0.000000 0.800032 0.786569 0.163417 4 2.8813E+05 3.945362 6.436938 3.652476 -13.429912 -8.540633 48.970093 0.152872 0.041245 0.000000 -0.368E-07 lgRho_cntr log_rel_run_E_err -11.5126466895835815 rel_E_err 3.0715197374127580D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5465574763058597E-002 1780 8.850698 1.984E+05 -17.831948 3.992132 51.682577 0.000000 0.000000 0.000000 0.213423 -3.611255 1788 0 3.6157E-01 8.850698 0.146785 0.702043 7.340716 -4.129571 51.682577 0.000000 0.800015 0.786577 0.165711 3 2.8816E+05 4.000960 6.438129 3.991910 -12.226089 -8.521908 48.970093 0.152846 0.041288 0.000000 -0.577E-07 lgRho_cntr log_rel_run_E_err -11.5012873927169963 rel_E_err 3.1529175017468738D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5247008818562633E-002 1790 8.863056 2.004E+05 -17.216144 4.357839 51.681216 0.000000 0.000000 0.000000 0.213418 -3.530776 1793 0 1.7495E-01 8.863056 0.138579 0.966663 7.549664 -4.127733 51.681216 0.000000 0.799985 0.786582 0.168102 3 2.8818E+05 4.056636 6.439209 4.357663 -11.067655 -8.501006 48.970093 0.152800 0.041363 0.000000 -0.913E-07 lgRho_cntr log_rel_run_E_err -11.5123715757955321 rel_E_err 3.0734660783625037D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5021045306617227E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.875364 2.025E+05 -22.076284 4.741252 51.680328 0.000000 0.000000 0.000000 0.213415 -3.450188 1801 0 -1.1811E-02 8.875364 0.130070 1.223949 7.754705 -4.126291 51.680328 0.000000 0.799933 0.786585 0.170554 5 2.8819E+05 4.112309 6.440204 4.741120 -9.945361 -8.478370 48.970093 0.152721 0.041493 0.000000 -0.144E-06 lgRho_cntr log_rel_run_E_err -11.5116740722022683 rel_E_err 3.0784062195449731D-12 save LOGS/profile4.data for model 1800 save photos/x800 for model 1800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4784401515650163E-002 1810 8.887680 2.046E+05 -21.968216 5.135773 51.679748 0.000000 0.000000 0.000000 0.213413 -3.369799 1816 0 -1.9749E-01 8.887680 0.121285 1.475667 7.956348 -4.125006 51.679748 0.000000 0.799844 0.786587 0.173043 5 2.8820E+05 4.167945 6.441135 5.135678 -8.852019 -8.454330 48.970093 0.152585 0.041717 0.000000 -0.223E-06 lgRho_cntr log_rel_run_E_err -11.5303474983282861 rel_E_err 2.9488487773983738D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4533399988305043E-002 1820 8.900052 2.069E+05 -20.817582 5.536640 51.679368 0.000000 0.000000 0.000000 0.213411 -3.289851 1835 0 -3.8155E-01 8.900052 0.112266 1.722697 8.154681 -4.124091 51.679368 0.000000 0.799692 0.786589 0.175557 5 2.8820E+05 4.223523 6.442019 5.536573 -7.784179 -8.429242 48.970093 0.152353 0.042097 0.000000 -0.345E-06 lgRho_cntr log_rel_run_E_err -11.5059159482351596 rel_E_err 3.1194932609860938D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4264306099770515E-002 1830 8.912507 2.092E+05 -18.876727 5.940458 51.679118 0.000000 0.000000 0.000000 0.213410 -3.210500 1851 0 -5.6309E-01 8.912507 0.103047 1.965891 8.349987 -4.122931 51.679118 0.000000 0.799433 0.786590 0.178094 5 2.8821E+05 4.279020 6.442860 5.940411 -6.737799 -8.403324 48.970093 0.151959 0.042745 0.000000 -0.524E-06 lgRho_cntr log_rel_run_E_err -11.5018490145241294 rel_E_err 3.1488428407899115D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3972420346234560E-002 1840 8.925074 2.116E+05 -19.556023 6.345846 51.678952 0.000000 0.000000 0.000000 0.213410 -3.131898 1860 0 -7.4172E-01 8.925074 0.093654 2.205770 8.542392 -4.121953 51.678952 0.000000 0.798991 0.786590 0.180663 5 2.8821E+05 4.334422 6.443676 6.345814 -5.709778 -8.376608 48.970093 0.151287 0.043849 0.000001 -0.792E-06 lgRho_cntr log_rel_run_E_err -11.5042571078183098 rel_E_err 3.1314313285612339D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3652349476869690E-002 1850 8.937784 2.140E+05 -18.394977 6.751812 51.678842 0.000000 0.000000 0.000000 0.213409 -3.054209 1864 0 -9.1693E-01 8.937784 0.084101 2.442881 8.732135 -4.121021 51.678842 0.000000 0.798238 0.786591 0.183288 5 2.8821E+05 4.389713 6.444473 6.751791 -4.696186 -8.348858 48.970093 0.150140 0.045734 0.000001 -0.119E-05 lgRho_cntr log_rel_run_E_err -11.5135097356034741 rel_E_err 3.0654219609215403D-12 save photos/x850 for model 1850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3297429093823156E-002 1860 8.950678 2.165E+05 -17.237937 7.157805 51.678768 0.000000 0.000000 0.000000 0.213409 -2.977656 1878 0 -1.0880E+00 8.950678 0.074388 2.677886 8.919599 -4.119802 51.678768 0.000000 0.796950 0.786591 0.186018 6 2.8821E+05 4.444870 6.445260 7.157790 -3.691696 -8.319765 48.970093 0.148177 0.048956 0.000003 -0.177E-05 lgRho_cntr log_rel_run_E_err -11.5047651020459174 rel_E_err 3.1277706349111558D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2899301234128502E-002 1870 8.963823 2.178E+05 -16.104135 7.563340 51.678740 0.000000 0.000000 0.000000 0.213409 -2.902592 1887 0 -1.2540E+00 8.963823 0.071992 2.911659 9.105347 -99.000000 51.678740 0.000000 0.794752 0.786591 0.188944 5 2.8821E+05 4.499860 6.451134 7.563330 -2.688719 -8.343088 48.970093 0.144822 0.054456 0.000005 -0.190E-05 lgRho_cntr log_rel_run_E_err -11.5210237118721377 rel_E_err 3.0128415227562403D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2447331277514697E-002 1880 8.977323 2.202E+05 -14.962496 7.967858 51.678740 0.000000 0.000000 0.000000 0.213409 -2.829562 1884 0 -1.4134E+00 8.977323 0.063120 3.145490 9.290304 -99.000000 51.678740 0.000000 0.791019 0.786591 0.192222 5 2.8821E+05 4.554632 6.452347 7.967851 -1.676184 -8.317156 48.970093 0.139109 0.063794 0.000009 -0.340E-05 lgRho_cntr log_rel_run_E_err -10.1386918997741748 rel_E_err 7.2662125935980909D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1927359467132441E-002 1890 8.991322 2.228E+05 -13.865955 8.370662 51.678740 0.000000 0.000000 0.000000 0.213409 -2.759310 1907 0 -1.5642E+00 8.991322 0.053340 3.381694 9.476203 -99.000000 51.678740 0.000000 0.784783 0.786591 0.196124 6 2.8821E+05 4.609126 6.453359 8.370658 -0.637829 -8.285530 48.970093 0.129518 0.079395 0.000018 -0.507E-05 lgRho_cntr log_rel_run_E_err -11.4854347326037587 rel_E_err 3.2701318790448948D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1318592721471335E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 9.001639 2.248E+05 -17.820699 8.651959 51.678740 0.000000 0.000000 0.000000 0.213409 -2.711684 1914 0 -2.1251E+00 9.001639 0.046101 3.551095 9.608929 -99.000000 51.678740 0.000000 0.778222 0.786591 0.199463 6 2.8821E+05 4.647536 6.454058 8.651956 0.117852 -8.261277 48.970093 0.119360 0.095810 0.000029 -0.661E-05 max increase log_rel_run_E_err -11.5053515304523799 rel_E_err 3.1235500523057591D-12 save LOGS/profile5.data for model 1900 save photos/x900 for model 1900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0820781694888494E-002 1910 9.013880 2.271E+05 -13.436400 8.964170 51.678740 0.000000 0.000000 0.000000 0.213409 -2.659578 1890 0 -1.7868E+00 9.013880 0.037506 3.747625 9.762147 -99.000000 51.678740 0.000000 0.768019 0.786591 0.204090 3 2.8821E+05 4.691256 6.454858 8.964168 1.003767 -8.231978 48.970093 0.103416 0.121340 0.000049 -0.873E-05 Lnuc log_rel_run_E_err -11.0975823627328190 rel_E_err -7.9876244424066419D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0168831639254499E-002 1920 9.029373 2.302E+05 -15.461662 9.321373 51.678740 0.000000 0.000000 0.000000 0.213409 -2.597137 1870 0 -1.9089E+00 9.029373 0.026487 3.993175 9.952218 -99.000000 51.678740 0.000000 0.752063 0.786591 0.211090 6 2.8821E+05 4.745123 6.455844 9.321371 2.110601 -8.194036 48.970093 0.078081 0.161264 0.000090 -0.121E-04 lgRho_cntr log_rel_run_E_err -11.4645731616405566 rel_E_err 3.4310483517736326D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9224780539552452E-002 1930 9.044558 2.332E+05 -15.294493 9.627492 51.678740 0.000000 0.000000 0.000000 0.213409 -2.531826 1832 0 -2.0592E+00 9.044558 0.015423 4.234379 10.137456 -99.000000 51.678740 0.000000 0.736107 0.786591 0.218787 6 2.8821E+05 4.799705 6.456821 9.627490 3.170828 -8.156032 48.970093 0.052172 0.201195 0.000148 -0.166E-04 lgRho_cntr log_rel_run_E_err -11.5122537448864701 rel_E_err 3.0743000710792257D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.8134054488374494E-002 1940 9.058595 2.362E+05 -16.779474 9.874580 51.678740 0.000000 0.000000 0.000000 0.213409 -2.461196 1775 0 -2.2198E+00 9.058595 0.004878 4.460057 10.309395 -99.000000 51.678740 0.000000 0.724179 0.786591 0.225911 6 2.8821E+05 4.854565 6.457750 9.874579 4.118040 -8.120084 48.970093 0.032342 0.231048 0.000208 -0.222E-04 lgRho_cntr log_rel_run_E_err -11.5520519503803705 rel_E_err 2.8050980715696924D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6943835566339567E-002 1950 9.071580 2.390E+05 -12.068141 10.077011 51.678740 0.000000 0.000000 0.000000 0.213409 -2.386690 1741 0 -2.3766E+00 9.071580 -0.005004 4.668442 10.466886 -99.000000 51.678740 0.000000 0.716674 0.786591 0.231968 3 2.8821E+05 4.909250 6.458635 10.077009 4.952342 -8.086689 48.970093 0.019592 0.249833 0.000258 -0.298E-04 lgRho_cntr log_rel_run_E_err -11.5042473849666500 rel_E_err -3.1315014348701498D-12 save photos/x950 for model 1950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5680357802308056E-002 1960 9.083929 2.418E+05 -12.179097 10.252214 51.678740 0.000000 0.000000 0.000000 0.213409 -2.310516 1679 0 -2.5239E+00 9.083929 -0.014368 4.863825 10.613447 -99.000000 51.678740 0.000000 0.712206 0.786591 0.237127 3 2.8821E+05 4.963541 6.459492 10.252212 5.706526 -8.055315 48.961286 0.011854 0.261013 0.000296 -0.396E-04 lgRho_cntr log_rel_run_E_err -11.8195456857773884 rel_E_err -1.5151454090028822D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.4337462989206841E-002 1970 9.096075 2.444E+05 -15.535949 10.411857 51.678740 0.000000 0.000000 0.000000 0.213409 -2.233683 1640 0 -2.6627E+00 9.096075 -0.023369 5.050916 10.752794 -99.000000 51.678740 0.000000 0.709560 0.786591 0.241663 5 2.8821E+05 5.017767 6.460366 10.411855 6.410428 -8.025571 48.961286 0.007189 0.267625 0.000325 -0.519E-04 lgRho_cntr log_rel_run_E_err -11.5454923306613342 rel_E_err 2.8477880896878285D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2896897451572503E-002 1980 9.108186 2.470E+05 -15.826723 10.561635 51.678740 0.000000 0.000000 0.000000 0.213409 -2.157181 1588 0 -2.7978E+00 9.108186 -0.032121 5.231713 10.886560 -99.000000 51.678740 0.000000 0.707995 0.786591 0.245756 6 2.8821E+05 5.071798 6.461262 10.561632 7.079030 -7.997063 48.961286 0.004370 0.271527 0.000347 -0.681E-04 lgRho_cntr log_rel_run_E_err -11.4502843421597049 rel_E_err 3.5458116112599835D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.1352989536883973E-002 1990 9.120369 2.496E+05 -11.122049 10.705509 51.678740 0.000000 0.000000 0.000000 0.213409 -2.081321 1556 0 -2.9284E+00 9.120369 -0.040767 5.408311 11.016416 -99.000000 51.678740 0.000000 0.707086 0.786591 0.249540 3 2.8821E+05 5.125694 6.462156 10.705507 7.724102 -7.969191 48.961286 0.002653 0.273783 0.000367 -0.942E-04 lgRho_cntr log_rel_run_E_err -11.1222744907350091 rel_E_err 7.5461513126417371D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.9695757937404085E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 9.132726 2.522E+05 -11.059251 10.845784 51.678740 0.000000 0.000000 0.000000 0.213409 -2.006243 1536 0 -3.0584E+00 9.132726 -0.049398 5.581856 11.143270 -99.000000 51.678740 0.000000 0.706638 0.786591 0.253086 3 2.8821E+05 5.179574 6.463029 10.845781 8.351869 -7.941577 48.965672 0.001605 0.274880 0.000390 -0.121E-03 lgRho_cntr log_rel_run_E_err -11.0396534820128132 rel_E_err 9.1273881146806509D-12 save LOGS/profile6.data for model 2000 save photos/2000 for model 2000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7921708439762993E-002 2010 9.145283 2.548E+05 -11.216034 10.983248 51.678740 0.000000 0.000000 0.000000 0.213409 -1.932396 1490 0 -3.1833E+00 9.145283 -0.057723 5.752011 11.266925 -99.000000 51.678740 0.000000 0.706698 0.786591 0.256421 3 2.8821E+05 5.233295 6.463982 10.983245 8.961538 -7.915700 48.965672 0.000965 0.274708 0.000427 -0.159E-03 lgRho_cntr log_rel_run_E_err -10.9273219683166172 rel_E_err 1.1821648217201806D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.6043679207202925E-002 2020 9.158036 2.575E+05 -14.912816 11.123684 51.678740 0.000000 0.000000 0.000000 0.213409 -1.859459 1460 0 -3.3059E+00 9.158036 -0.066295 5.924464 11.391643 -99.000000 51.678740 0.000000 0.707808 0.786591 0.259620 5 2.8821E+05 5.286994 6.464969 11.123681 9.574464 -7.889361 48.965672 0.000571 0.271943 0.000520 -0.209E-03 lgRho_cntr log_rel_run_E_err -11.5736724638345656 rel_E_err 2.6688707143293028D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.4004565151596699E-002 retry: check_lgL_power_photo_change hard limit 2029 2030 9.170045 2.599E+05 -10.724180 11.253876 51.678740 0.000000 0.000000 0.000000 0.213409 -1.795290 1418 1 -3.6466E+00 9.170045 -0.074100 6.080437 11.503834 -99.000000 51.678740 0.000000 0.711221 0.786591 0.262280 3 2.8821E+05 5.335654 6.465908 11.253873 10.119802 -7.865768 48.965672 0.000350 0.263531 0.000780 -0.252E-03lgL_power_phot log_rel_run_E_err -11.8958290397713284 rel_E_err 1.2710743657647900D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.2050340432811399E-002 2040 9.177870 2.615E+05 -10.662078 11.340339 51.678740 0.000000 0.000000 0.000000 0.213409 -1.756708 1400 1 -3.7275E+00 9.177870 -0.079072 6.179520 11.574883 -99.000000 51.678740 0.000000 0.716022 0.786591 0.263781 3 2.8821E+05 5.365994 6.466521 11.340336 10.459868 -7.850894 48.965672 0.000253 0.251799 0.001224 -0.312E-03lgL_power_phot log_rel_run_E_err -11.8996276588640146 rel_E_err 1.2600052107221844D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0757965191315488E-002 2050 9.185899 2.630E+05 -10.335002 11.430296 51.678740 0.000000 0.000000 0.000000 0.213409 -1.720996 1376 1 -3.7885E+00 9.185899 -0.083863 6.278875 11.645906 -99.000000 51.678740 0.000000 0.724843 0.786591 0.265056 3 2.8821E+05 5.395481 6.467093 11.430293 10.791978 -7.836542 48.965672 0.000179 0.230489 0.002334 -0.339E-03lgL_power_phot log_rel_run_E_err -11.4164229738203193 rel_E_err -3.8333372218457676D-12 save photos/x050 for model 2050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.9426447300562394E-002 2060 9.194172 2.647E+05 -9.921725 11.524834 51.678740 0.000000 0.000000 0.000000 0.213409 -1.689439 1358 1 -3.8404E+00 9.194172 -0.088812 6.378654 11.717024 -99.000000 51.678740 0.000000 0.739855 0.786591 0.266028 3 2.8821E+05 5.423633 6.467797 11.524830 11.110586 -7.822243 48.965672 0.000123 0.194955 0.005192 -0.397E-03lgL_power_phot log_rel_run_E_err -11.5691080306282377 rel_E_err -2.6970684539885060D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.8056688984880727E-002 2070 9.202695 2.663E+05 -9.462048 11.623490 51.678740 0.000000 0.000000 0.000000 0.213409 -1.662121 1345 1 -3.8770E+00 9.202695 -0.093824 6.479580 11.788748 -99.000000 51.678740 0.000000 0.762231 0.786591 0.266723 3 2.8821E+05 5.450416 6.468481 11.623487 11.407334 -7.807706 48.965672 0.000079 0.143919 0.012057 -0.461E-03lgL_power_phot log_rel_run_E_err -11.7386267297072919 rel_E_err -1.8254639901214594D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.6641981940705382E-002 2080 9.211523 2.680E+05 -8.875756 11.724221 51.678740 0.000000 0.000000 0.000000 0.213409 -1.635195 1330 1 -3.8928E+00 9.211523 -0.099206 6.584459 11.863068 -99.000000 51.678740 0.000000 0.789273 0.786591 0.267442 3 2.8821E+05 5.477566 6.469098 11.724218 11.674822 -7.791683 48.965672 0.000046 0.086131 0.025554 -0.440E-03lgL_power_phot log_rel_run_E_err -12.0330693484822859 rel_E_err 9.2668183828430222D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.5145070950269573E-002 2090 9.223887 2.707E+05 -11.604814 11.857423 51.678740 0.000000 0.000000 0.000000 0.213409 -1.587398 1303 1 -3.7833E+00 9.223887 -0.107172 6.736505 11.970289 -99.000000 51.678740 0.000000 0.819841 0.786591 0.269288 4 2.8821E+05 5.519923 6.470182 11.857420 11.976585 -7.768840 48.965672 0.000016 0.028611 0.050795 -0.609E-03lgL_power_phot log_rel_run_E_err -11.5809114097848465 rel_E_err 2.6247539031646556D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.2937965553154233E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.237469 2.738E+05 -10.839362 12.001839 51.678740 0.000000 0.000000 0.000000 0.213409 -1.518127 1280 1 -3.8940E+00 9.237469 -0.116491 6.910896 12.092559 -99.000000 51.678740 0.000000 0.835156 0.786591 0.272461 4 2.8821E+05 5.573706 6.471394 12.001836 12.231044 -7.742190 48.965672 0.000003 0.004975 0.069597 -0.791E-03 lgRho_cntr log_rel_run_E_err -11.5677606471773853 rel_E_err 2.7054490080663133D-12 save LOGS/profile7.data for model 2100 save photos/x100 for model 2100 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.0369864196087505E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2102 2110 9.240697 2.728E+05 -6.963219 12.044819 51.678740 0.000000 0.000000 0.000000 0.213409 -1.500589 2499 1 -4.9448E+00 9.240697 -0.114121 6.956145 12.124121 -99.000000 51.678740 0.000000 0.836719 0.786591 0.273264 3 2.8821E+05 5.586958 6.469690 12.044816 12.292035 -7.865160 48.965672 0.000001 0.002859 0.071862 0.639E-02 max increase log_rel_run_E_err -10.6850471417642101 rel_E_err 2.0388572616127027D-12 check gamma integral 9.7011425264255744E-003 2120 9.244981 2.735E+05 -9.989684 12.087980 51.678740 0.000000 0.000000 0.000000 0.213409 -1.476676 2502 1 -4.1530E+00 9.244981 -0.114863 7.010374 12.162033 -99.000000 51.678740 0.000000 0.837993 0.786591 0.274367 5 2.8821E+05 5.604827 6.472576 12.087976 12.349583 -7.875066 48.965672 0.000001 0.001170 0.073788 -0.865E-03 max increase log_rel_run_E_err -10.3323831357236013 rel_E_err 2.5293740700609038D-12 check gamma integral 8.8958825271074991E-003 2130 9.258639 2.765E+05 -8.172178 12.224981 51.678740 0.000000 0.000000 0.000000 0.213409 -1.400872 2503 1 -4.1332E+00 9.258639 -0.123861 7.179068 12.279481 -99.000000 51.678740 0.000000 0.838764 0.786591 0.277795 5 2.8821E+05 5.661648 6.473867 12.224977 12.511620 -7.853990 48.965672 0.000000 0.000025 0.075327 -0.117E-02 lgRho_cntr log_rel_run_E_err -10.1365701312727818 rel_E_err 2.7191854477045080D-12 check gamma integral 6.3966441304649053E-003 2140 9.271992 2.794E+05 -6.634951 12.360069 51.678740 0.000000 0.000000 0.000000 0.213409 -1.330802 2503 1 -4.2653E+00 9.271992 -0.132216 7.337788 12.389687 -99.000000 51.678740 0.000000 0.838466 0.786591 0.280850 5 2.8821E+05 5.715525 6.475167 12.360064 12.653125 -7.835221 48.965672 0.000000 0.000011 0.075782 -0.152E-02 lgRho_cntr log_rel_run_E_err -9.9996763761295728 rel_E_err 2.7148987740595754D-12 check gamma integral 4.0666134497322811E-003 2150 9.285706 2.823E+05 -6.870873 12.496768 51.678740 0.000000 0.000000 0.000000 0.213409 -1.262779 2506 1 -4.3901E+00 9.285706 -0.140472 7.495504 12.499171 -99.000000 51.678740 0.000000 0.837704 0.786591 0.283802 5 2.8821E+05 5.769233 6.476523 12.496763 12.789927 -7.817350 48.965672 0.000000 0.000011 0.076861 -0.197E-02 lgRho_cntr log_rel_run_E_err -9.8921269435907266 rel_E_err 2.8624372271880467D-12 save photos/x150 for model 2150 check gamma integral 1.7918424685617145E-003 reached high velocities 0.40073328536547548 stopping in at least 1481.7602369737490 seconds save LOGS/gamma1_prof001.data for model 2159 2160 9.299847 2.852E+05 -4.078344 12.635547 51.678740 0.000000 0.000000 0.000000 0.213409 -1.197145 2510 1 -4.5095E+00 9.299847 -0.148694 7.653086 12.608766 -99.000000 51.678740 0.000000 0.835771 0.786591 0.286820 5 2.8821E+05 5.822758 6.477930 12.635542 12.925537 -7.800198 48.965672 0.000000 0.000010 0.079581 -0.255E-02 lgRho_cntr log_rel_run_E_err -9.5370132723594185 rel_E_err -1.1513151451612594D-10 check gamma integral -4.2067803999310454E-004 retry: logT > hydro_mtx_max_allowed_logT 2397 2164 retry: get_T_tau -- L <= 0 2164 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 2480 2165 retry: check_lgL_power_photo_change hard limit 2165 retry: check_lgL_power_photo_change hard limit 2167 retry: check_lgL_power_photo_change hard limit 2168 2170 9.300228 2.845E+05 -6.081429 12.556849 51.678740 0.000000 0.000000 0.000000 0.213409 -1.189273 2510 7 -6.0058E+00 9.300228 -0.148176 7.649014 12.608469 -99.000000 51.678740 0.000000 0.834851 0.786591 0.287748 3 2.8821E+05 5.826831 6.474431 12.556843 12.826880 -7.786685 48.965672 0.000000 0.000010 0.080870 -0.878E-01lgL_power_phot log_rel_run_E_err -8.8371753817317433 rel_E_err 6.4997780227338500D-11 retry: check_lgL_power_photo_change hard limit 2170 2170 9.299392 2.844E+05 -6.139859 12.530768 51.678740 0.000000 0.000000 0.000000 0.213409 -1.191764 2510 8 -6.3068E+00 9.299392 -0.147676 7.638461 12.601491 -99.000000 51.678740 0.000000 0.834856 0.786591 0.287733 3 2.8821E+05 5.824262 6.474843 12.530762 12.795536 -7.789826 48.965672 0.000000 0.000010 0.080863 -0.763E-01 retry log_rel_run_E_err -8.8561344018837165 rel_E_err 2.8484009958178770D-12 check gamma integral -2.6470860592128304E-004 retry: check_lgL_power_photo_change hard limit 2173 retry: check_lgL_power_photo_change hard limit 2177 2180 9.309307 2.854E+05 -5.941659 12.843717 51.678740 0.000000 0.000000 0.000000 0.213409 -1.162205 2510 10 -6.5413E+00 9.309307 -0.153266 7.761809 12.683709 -99.000000 51.678740 0.000000 0.834802 0.786591 0.287913 3 2.8821E+05 5.854747 6.469729 12.843713 13.164077 -7.753258 48.965672 0.000000 0.000010 0.080939 -0.207E+00lgL_power_phot log_rel_run_E_err -8.8356695719244058 rel_E_err 6.0169147387706653D-12 check gamma integral -1.8763347070318618E-003 retry: check_lgL_power_photo_change hard limit 2184 2190 9.320336 2.860E+05 -5.712106 13.199368 51.678740 0.000000 0.000000 0.000000 0.213409 -1.129342 2511 11 -6.7974E+00 9.320336 -0.158622 7.895399 12.773930 -99.000000 51.678740 0.000000 0.834737 0.786591 0.288118 3 2.8821E+05 5.888673 6.462828 13.199365 13.564337 -7.712213 48.965672 0.000000 0.000010 0.081030 -0.354E+00lgL_power_phot log_rel_run_E_err -8.8157962030126367 rel_E_err 7.7415958286355154D-12 check gamma integral -3.5675641256273380E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.333928 2.864E+05 -5.422950 13.642289 51.678740 0.000000 0.000000 0.000000 0.213409 -1.088773 2510 11 -6.9562E+00 9.333928 -0.164272 8.055212 12.883375 -99.000000 51.678740 0.000000 0.834612 0.786591 0.288402 3 2.8821E+05 5.930556 6.454160 13.642288 14.039784 -7.666642 48.965672 0.000000 0.000009 0.081206 -0.540E+00lgL_power_phot log_rel_run_E_err -8.7946991722160490 rel_E_err 4.7875725272017777D-12 save LOGS/profile8.data for model 2200 save photos/x200 for model 2200 check gamma integral -5.4938507833763315E-003 2210 9.348777 2.866E+05 -5.101149 14.119583 51.678740 0.000000 0.000000 0.000000 0.213409 -1.044462 2512 11 -7.1334E+00 9.348777 -0.169534 8.224812 13.000876 -99.000000 51.678740 0.000000 0.834338 0.786591 0.288767 3 2.8821E+05 5.976372 6.444622 14.119582 14.529264 -7.622420 48.965672 0.000000 0.000009 0.081588 -0.744E+00lgL_power_phot log_rel_run_E_err -8.7851820701942742 rel_E_err 3.0077636351889521D-12 check gamma integral -7.3901210633916621E-003 2220 9.363716 2.865E+05 -4.774772 14.571283 51.678740 0.000000 0.000000 0.000000 0.213409 -1.000179 2512 11 -7.2818E+00 9.363716 -0.174123 8.391867 13.117132 -99.000000 51.678740 0.000000 0.833711 0.786591 0.289232 3 2.8821E+05 6.022416 6.434768 14.571283 14.974571 -7.582010 48.965672 0.000001 0.000009 0.082464 -0.951E+00lgL_power_phot log_rel_run_E_err -8.7787407285319130 rel_E_err 1.5412983464624813D-12 check gamma integral -9.0767830836081861E-003 2230 9.378908 2.862E+05 -4.458030 14.971461 51.678740 0.000000 0.000000 0.000000 0.213409 -0.956140 2512 11 -7.3832E+00 9.378908 -0.178273 8.560541 13.233558 -99.000000 51.678740 0.000000 0.832140 0.786591 0.289916 3 2.8821E+05 6.068897 6.424552 14.971461 15.353898 -7.544319 48.965672 0.000001 0.000010 0.084659 -0.116E+01lgL_power_phot log_rel_run_E_err -8.7713252523168865 rel_E_err 2.1343764459964931D-12 check gamma integral -1.0569977957534877E-002 2240 9.395452 2.857E+05 -4.182055 15.314884 51.678740 0.000000 0.000000 0.000000 0.213409 -0.911314 2506 11 -7.4315E+00 9.395452 -0.182384 8.745857 13.358127 -99.000000 51.678740 0.000000 0.827493 0.786591 0.291288 3 2.8821E+05 6.118233 6.413303 15.314884 15.658877 -7.506536 48.965672 0.000002 0.000010 0.091154 -0.140E+01 lgRho_cntr log_rel_run_E_err -8.7567498296267381 rel_E_err -7.6531084350132002D-13 check gamma integral -1.1947240961891172E-002 2250 9.414175 2.850E+05 -4.114735 15.606722 51.678740 0.000000 0.000000 0.000000 0.213409 -0.871281 2496 11 -7.4760E+00 9.414175 -0.186673 8.959392 13.494939 -99.000000 51.678740 0.000000 0.811292 0.786591 0.295213 3 2.8821E+05 6.169369 6.400521 15.606722 15.879982 -7.467256 48.965672 0.000004 0.000011 0.113571 -0.168E+01 lgRho_cntr log_rel_run_E_err -8.7344698008486361 rel_E_err 1.6939115821970911D-11 save photos/x250 for model 2250 check gamma integral -1.3189135181665737E-002 2260 9.442231 2.838E+05 -5.295265 15.957497 51.678740 0.000000 0.000000 0.000000 0.213409 -0.872583 2484 11 -7.5420E+00 9.442231 -0.192630 9.285616 13.686799 -99.000000 51.678740 0.000000 0.709088 0.786591 0.320322 4 2.8821E+05 6.217338 6.381282 15.957497 16.082472 -7.413770 48.965672 0.000010 0.000023 0.233258 -0.213E+01 XSi_cntr log_rel_run_E_err -8.6913472673827830 rel_E_err 3.8541825664031853D-12 check gamma integral -1.4461534949246234E-002 2270 9.455290 2.831E+05 -6.966788 16.104158 51.678740 0.000000 0.000000 0.000000 0.213409 -0.908153 2480 11 -7.8813E+00 9.455290 -0.195514 9.451174 13.774870 -99.000000 51.678740 0.000000 0.591126 0.786591 0.354823 4 2.8821E+05 6.221824 6.371478 16.104158 16.191086 -7.388576 48.965672 0.000017 0.000044 0.280772 -0.237E+01 XO_cntr log_rel_run_E_err -8.6594769591943983 rel_E_err 4.2941728874010155D-12 check gamma integral -1.4878616571277292E-002 2280 9.463156 2.826E+05 -5.097242 16.187896 51.678740 0.000000 0.000000 0.000000 0.213409 -0.939977 2477 11 -7.9793E+00 9.463156 -0.197515 9.566641 13.831728 -99.000000 51.678740 0.000000 0.486196 0.786591 0.390669 3 2.8821E+05 6.218373 6.364519 16.187896 16.316915 -7.371413 48.965672 0.000022 0.000051 0.306766 -0.254E+01 XO_cntr log_rel_run_E_err -8.6324225555559089 rel_E_err 3.2172631006186339D-12 check gamma integral -1.5103504280474226E-002 2290 9.469758 2.821E+05 -4.811516 16.253203 51.678740 0.000000 0.000000 0.000000 0.213409 -0.970933 2471 11 -7.9495E+00 9.469758 -0.199584 9.684648 13.885229 -99.000000 51.678740 0.000001 0.377014 0.786591 0.433712 3 2.8821E+05 6.212387 6.357190 16.253203 16.481849 -7.353940 48.965672 0.000028 0.000049 0.341710 -0.273E+01 dX_nuc o16 log_rel_run_E_err -8.6014139310476700 rel_E_err -9.9856037525169550D-12 check gamma integral -1.5292863318533606E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.475346 2.815E+05 -8.051638 16.299199 51.678740 0.000000 0.000000 0.000000 0.213409 -0.997710 2468 11 -7.8658E+00 9.475346 -0.201963 9.815407 13.938396 -99.000000 51.678740 0.000001 0.271596 0.786591 0.482075 4 2.8821E+05 6.206194 6.348617 16.299199 16.672921 -7.334221 48.965672 0.000033 0.000042 0.377062 -0.296E+01 max increase log_rel_run_E_err -8.5451242424964065 rel_E_err 5.1082996685597387D-12 save LOGS/profile9.data for model 2300 save photos/x300 for model 2300 check gamma integral -1.5468668286814704E-002 2310 9.479785 2.807E+05 -4.575227 16.316359 51.678740 0.000000 0.000000 0.000000 0.213409 -1.018603 2464 11 -7.8733E+00 9.479785 -0.204925 9.964563 13.990339 -99.000000 51.678740 0.000001 0.179916 0.786591 0.531063 3 2.8821E+05 6.200874 6.337744 16.316358 16.865948 -7.310238 48.965672 0.000037 0.000031 0.407286 -0.325E+01 dX_nuc o16 log_rel_run_E_err -8.4542110833061432 rel_E_err -7.5956072273371363D-11 check gamma integral -1.5643283819555119E-002 2320 9.482269 2.796E+05 -7.703117 16.280120 51.678740 0.000000 0.000000 0.000000 0.213409 -1.035025 2468 11 -7.7619E+00 9.482269 -0.208777 10.119886 14.032589 -99.000000 51.678740 0.000002 0.111518 0.786591 0.573148 4 2.8821E+05 6.194935 6.323283 16.280119 17.009608 -7.281792 48.965672 0.000037 0.000021 0.427780 -0.365E+01 dX_nuc o16 log_rel_run_E_err -8.3574896030513131 rel_E_err 6.9931288515929502D-12 check gamma integral -1.5834810725172350E-002 2330 9.479710 2.778E+05 -9.770608 16.096399 51.678740 0.000000 0.000000 0.000000 0.213409 -1.059289 2474 11 -7.5160E+00 9.479710 -0.214826 10.234330 14.040494 -99.000000 51.678740 0.000001 0.066297 0.786591 0.604279 5 2.8821E+05 6.177554 6.300027 16.096398 16.977128 -7.236109 48.965672 0.000032 0.000012 0.437698 -0.436E+01 max increase log_rel_run_E_err -8.2716602285600924 rel_E_err 8.2920633076431279D-12 check gamma integral -1.6160538705619214E-002 2340 9.460954 2.748E+05 -11.575686 15.478429 51.678740 0.000000 0.000000 0.000000 0.213409 -1.128937 2510 11 -7.6874E+00 9.460954 -0.224509 10.105790 13.923027 -99.000000 51.678740 0.000000 0.049970 0.786591 0.614290 5 2.8821E+05 6.112983 6.261606 15.478427 16.330052 -7.168106 48.996427 0.000019 0.000007 0.438347 -0.564E+01 lgRho_cntr log_rel_run_E_err -8.2112218889310782 rel_E_err 9.1309619121849031D-12 check gamma integral -1.6803223460040890E-002 2350 9.444316 2.730E+05 -12.370427 14.988481 51.678740 0.000000 0.000000 0.000000 0.213409 -1.187440 2517 11 -7.8666E+00 9.444316 -0.229912 9.927653 13.806607 -99.000000 51.678740 0.000000 0.048573 0.786591 0.613176 7 2.8821E+05 6.058157 6.239664 14.988477 15.715371 -7.132663 48.996427 0.000013 0.000005 0.437319 -0.643E+01 lgRho_cntr log_rel_run_E_err -8.1954505423564790 rel_E_err 8.9278723175392999D-12 save photos/x350 for model 2350 check gamma integral -1.7035670501087348E-002 retry: logT > hydro_mtx_max_allowed_logT 1254 2359 2360 9.429737 2.717E+05 -12.731720 14.578468 51.678740 0.000000 0.000000 0.000000 0.213409 -1.239261 2529 12 -8.1770E+00 9.429737 -0.233919 9.764793 13.702106 -99.000000 51.678740 0.000000 0.048323 0.786591 0.611399 8 2.8821E+05 6.010187 6.223207 14.578461 15.161261 -7.107387 48.996427 0.000009 0.000003 0.436664 -0.706E+01 max increase log_rel_run_E_err -8.1875523972164910 rel_E_err 9.0420941803197907D-12 check gamma integral -1.7018247195701757E-002 retry: logT > hydro_mtx_max_allowed_logT 1248 2361 retry: logT < hydro_mtx_min_allowed_logT 1480 2362 retry: logT < hydro_mtx_min_allowed_logT 1280 2364 retry: logT < hydro_mtx_min_allowed_logT 1237 2366 retry: logT < hydro_mtx_min_allowed_logT 1229 2369 2370 9.426831 2.714E+05 -12.765324 14.498709 51.678740 0.000000 0.000000 0.000000 0.213409 -1.249658 2529 17 -8.8904E+00 9.426831 -0.234673 9.732131 13.681070 -99.000000 51.678740 0.000000 0.048302 0.786591 0.611022 6 2.8821E+05 6.000629 6.220088 14.498702 15.049375 -7.102713 48.996427 0.000009 0.000003 0.436571 -0.718E+01 max increase log_rel_run_E_err -8.1816965874237919 rel_E_err 8.4401360242010346D-12 check gamma integral -1.6989213630182527E-002 retry: logT < hydro_mtx_min_allowed_logT 1231 2372 retry: logT < hydro_mtx_min_allowed_logT 1215 2377 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1208 2380 2380 9.424797 2.713E+05 -12.931745 14.443234 51.678740 0.000000 0.000000 0.000000 0.213409 -1.256953 2529 20 -9.0016E+00 9.424797 -0.235194 9.709234 13.666298 -99.000000 51.678740 0.000000 0.048290 0.786591 0.610755 6 2.8821E+05 5.993936 6.217931 14.443226 14.970765 -7.099500 48.996427 0.000008 0.000003 0.436513 -0.727E+01 retry log_rel_run_E_err -8.1759570421295980 rel_E_err 8.4821209618656756D-12 check gamma integral -1.6963653920304550E-002 retry: logT > hydro_mtx_max_allowed_logT 1203 2383 retry: logT < hydro_mtx_min_allowed_logT 1262 2388 2390 9.422832 2.711E+05 -13.050963 14.389915 51.678740 0.000000 0.000000 0.000000 0.213409 -1.264014 2529 22 -8.8119E+00 9.422832 -0.235692 9.687092 13.651992 -99.000000 51.678740 0.000000 0.048280 0.786591 0.610495 7 2.8821E+05 5.987469 6.215868 14.389906 14.894606 -7.096441 48.996427 0.000008 0.000003 0.436464 -0.735E+01 max increase log_rel_run_E_err -8.1702837502090606 rel_E_err 8.5849297996061927D-12 check gamma integral -1.6934810490643919E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1182 2391 retry: logT < hydro_mtx_min_allowed_logT 1187 2393 retry: logT > hydro_mtx_max_allowed_logT 1181 2396 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1174 2400 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.421577 2.710E+05 -13.234984 14.356001 51.678740 0.000000 0.000000 0.000000 0.213409 -1.268532 2529 26 -9.2242E+00 9.421577 -0.236008 9.672940 13.642836 -99.000000 51.678740 0.000000 0.048275 0.786591 0.610328 6 2.8821E+05 5.983337 6.214561 14.355992 14.845854 -7.094510 48.996427 0.000008 0.000003 0.436434 -0.740E+01 retry log_rel_run_E_err -8.1647818243004995 rel_E_err 8.5293797105314139D-12 save LOGS/profile10.data for model 2400 save photos/x400 for model 2400 check gamma integral -1.6914235819594302E-002 retry: logT < hydro_mtx_min_allowed_logT 1166 2405 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1160 2409 2410 9.420092 2.709E+05 -13.174376 14.316026 51.678740 0.000000 0.000000 0.000000 0.213409 -1.273882 2529 28 -9.0344E+00 9.420092 -0.236379 9.656192 13.631987 -99.000000 51.678740 0.000000 0.048270 0.786591 0.610129 6 2.8821E+05 5.978448 6.213025 14.316017 14.788082 -7.092248 48.996427 0.000007 0.000003 0.436402 -0.746E+01 max increase log_rel_run_E_err -8.1593731502486637 rel_E_err 8.6696640945954159D-12 check gamma integral -1.6887711772736024E-002 retry: logT < hydro_mtx_min_allowed_logT 1155 2413 retry: logT > hydro_mtx_max_allowed_logT 1152 2415 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin retry: adjust_correction failed in eval_equations -- give up in solver 2417 2420 9.418881 2.708E+05 -13.019229 14.283541 51.678740 0.000000 0.000000 0.000000 0.213409 -1.278251 2529 31 -9.1457E+00 9.418881 -0.236680 9.642528 13.623126 -99.000000 51.678740 0.000000 0.048266 0.786591 0.609966 7 2.8821E+05 5.974460 6.211777 14.283531 14.740887 -7.090418 48.996427 0.000007 0.000003 0.436378 -0.751E+01 max increase log_rel_run_E_err -8.1540155902295499 rel_E_err 8.1993689906466656D-12 check gamma integral -1.6864319066925489E-002 retry: logT > hydro_mtx_max_allowed_logT 1142 2421 retry: logT > hydro_mtx_max_allowed_logT 1136 2426 2430 9.417740 2.707E+05 -13.183379 14.253042 51.678740 0.000000 0.000000 0.000000 0.213409 -1.282371 2529 33 -8.9560E+00 9.417740 -0.236962 9.629657 13.614769 -99.000000 51.678740 0.000000 0.048262 0.786591 0.609813 6 2.8821E+05 5.970704 6.210609 14.253031 14.696376 -7.088708 48.996427 0.000007 0.000003 0.436357 -0.756E+01 max increase log_rel_run_E_err -8.1485341555198652 rel_E_err 8.7525487156454185D-12 check gamma integral -1.6840829640804689E-002 retry: logT < hydro_mtx_min_allowed_logT 1235 2431 retry: logT > hydro_mtx_max_allowed_logT 1126 2433 retry: logT < hydro_mtx_min_allowed_logT 1125 2437 2440 9.416666 2.706E+05 -13.190397 14.224399 51.678740 0.000000 0.000000 0.000000 0.213409 -1.286254 2529 36 -9.0672E+00 9.416666 -0.237226 9.617531 13.606888 -99.000000 51.678740 0.000000 0.048259 0.786591 0.609667 7 2.8821E+05 5.967166 6.209513 14.224388 14.654398 -7.087108 48.996427 0.000007 0.000003 0.436339 -0.760E+01 max increase log_rel_run_E_err -8.1433726601829992 rel_E_err 8.2645382146263223D-12 check gamma integral -1.6817407703711172E-002 retry: abs(dlogT) > hydro_mtx_max_allowed 1114 2441 retry: logT < hydro_mtx_min_allowed_logT 1142 2445 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1142 2449 2450 9.415559 2.705E+05 -13.384896 14.194961 51.678740 0.000000 0.000000 0.000000 0.213409 -1.290261 2529 39 -9.1785E+00 9.415559 -0.237497 9.605031 13.598756 -99.000000 51.678740 0.000000 0.048257 0.786591 0.609517 6 2.8821E+05 5.963519 6.208388 14.194950 14.611076 -7.085470 48.996427 0.000007 0.000002 0.436321 -0.765E+01 max increase log_rel_run_E_err -8.1382689096120675 rel_E_err 8.6580137726603426D-12 save photos/x450 for model 2450 check gamma integral -1.6791942585617902E-002 retry: logT < hydro_mtx_min_allowed_logT 1184 2453 retry: logT < hydro_mtx_min_allowed_logT 1092 2457 retry: logT < hydro_mtx_min_allowed_logT 1093 2459 2460 9.414403 2.704E+05 -13.674281 14.164324 51.678740 0.000000 0.000000 0.000000 0.213409 -1.294448 2529 42 -9.2898E+00 9.414403 -0.237779 9.591980 13.590256 -99.000000 51.678740 0.000000 0.048254 0.786591 0.609360 6 2.8821E+05 5.959711 6.207219 14.164312 14.565798 -7.083771 48.996427 0.000007 0.000002 0.436304 -0.769E+01 max increase log_rel_run_E_err -8.1333206989606435 rel_E_err 7.9331050054355858D-12 check gamma integral -1.6763917706860233E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1100 2462 retry: logT < hydro_mtx_min_allowed_logT 1098 2465 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1084 2469 2470 9.413690 2.704E+05 -13.668151 14.145458 51.678740 0.000000 0.000000 0.000000 0.213409 -1.297035 2529 45 -9.4803E+00 9.413690 -0.237952 9.583924 13.585004 -99.000000 51.678740 0.000000 0.048253 0.786591 0.609263 6 2.8821E+05 5.957361 6.206498 14.145446 14.537820 -7.082727 48.996427 0.000007 0.000002 0.436294 -0.772E+01 hold log_rel_run_E_err -8.1283606711719738 rel_E_err 7.9905721776357831D-12 check gamma integral -1.6745878560306106E-002 retry: logT > hydro_mtx_max_allowed_logT 1091 2477 retry: logT > hydro_mtx_max_allowed_logT 1088 2479 2480 9.412837 2.703E+05 -13.597604 14.122938 51.678740 0.000000 0.000000 0.000000 0.213409 -1.300131 2547 47 -9.3697E+00 9.412837 -0.238159 9.574286 13.578715 -99.000000 51.678740 0.000000 0.048251 0.786591 0.609147 6 2.8821E+05 5.954549 6.205636 14.122926 14.504326 -7.081484 48.996427 0.000007 0.000002 0.436282 -0.776E+01 max increase log_rel_run_E_err -8.1235403281601339 rel_E_err 8.2079228026102149D-12 k, q, energy_removed_layers before adjustment is 1121 0.99999907222897710 3.6177587775773083E+045 k, q, energy_removed_layers after adjustment is 1326 0.99998731943029429 1.7347592315748545E+047 Layers above q= 0.99998731943029429 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.2109375000000 max vel inside fraction of cutoff 1539.7157642254806 max c/cs inside fraction of cutoff 0.54010892836555346 average v/vesc outside cutoff 0.71800411115609353 Kinetic plus potential energy outside cutoff 1.7347592315748545E+047 mass inside cutoff 1326 51.678084617863327 relax counter 0 log max v [km/s]= 3.9311186758886998 check gamma integral -1.6723560542241840E-002 retry: logT > hydro_mtx_max_allowed_logT 1085 2482 retry: logT > hydro_mtx_max_allowed_logT 1080 2486 retry: logT > hydro_mtx_max_allowed_logT 1075 2490 2490 9.412137 2.702E+05 -13.538183 14.104513 51.678740 0.000000 0.000000 0.000000 0.213409 -1.302672 2547 50 -9.4810E+00 9.412137 -0.238327 9.566384 13.573556 -99.000000 51.678740 0.000000 0.048250 0.786591 0.609051 5 2.8821E+05 5.952243 6.204933 14.104501 14.476844 -7.080467 48.996427 0.000006 0.000002 0.436273 -0.779E+01 retry log_rel_run_E_err -8.1187019810850565 rel_E_err 8.5740414768904600D-12 k, q, energy_removed_layers before adjustment is 1133 0.99999888354174082 2.3411441580046747E+046 k, q, energy_removed_layers after adjustment is 1326 0.99998731943029429 1.8494025060679071E+047 Layers above q= 0.99998731943029429 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.3417968750000 max vel inside fraction of cutoff 1549.0097280601790 max c/cs inside fraction of cutoff 0.54393621865781550 average v/vesc outside cutoff 0.73687121081895834 Kinetic plus potential energy outside cutoff 1.8494025060679071E+047 mass inside cutoff 1326 51.678084617863327 relax counter 0 log max v [km/s]= 3.9441815510562455 check gamma integral -1.6704656506553877E-002 retry: logT > hydro_mtx_max_allowed_logT 1071 2494 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1072 2499 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.411312 2.702E+05 -13.484453 14.082825 51.678740 0.000000 0.000000 0.000000 0.213409 -1.305670 2547 52 -9.2912E+00 9.411312 -0.238526 9.557063 13.567465 -99.000000 51.678740 0.000000 0.048249 0.786591 0.608938 6 2.8821E+05 5.949523 6.204107 14.082813 14.444405 -7.079271 48.996427 0.000006 0.000002 0.436263 -0.782E+01 max increase log_rel_run_E_err -8.1140108378614695 rel_E_err 8.5559198684073641D-12 save LOGS/profile11.data for model 2500 save photos/x500 for model 2500 k, q, energy_removed_layers before adjustment is 1140 0.99999876787290143 3.9245450594848977E+046 k, q, energy_removed_layers after adjustment is 1328 0.99998702027876840 1.9803581321786949E+047 Layers above q= 0.99998702027876840 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.4980468750000 max vel inside fraction of cutoff 1559.8762211012727 max c/cs inside fraction of cutoff 0.54842598632182138 average v/vesc outside cutoff 0.75648013709720940 Kinetic plus potential energy outside cutoff 1.9803581321786949E+047 mass inside cutoff 1328 51.678069158089421 relax counter 0 log max v [km/s]= 3.9604304102019614 check gamma integral -1.6681656654899187E-002 retry: logT < hydro_mtx_min_allowed_logT 1063 2502 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1102 2507 2510 9.410423 2.701E+05 -13.623663 14.059515 51.678740 0.000000 0.000000 0.000000 0.213409 -1.308902 2547 54 -9.2598E+00 9.410423 -0.238740 9.547022 13.560898 -99.000000 51.678740 0.000000 0.048247 0.786591 0.608817 6 2.8821E+05 5.946594 6.203220 14.059502 14.409433 -7.077988 48.996427 0.000006 0.000002 0.436253 -0.786E+01 max increase log_rel_run_E_err -8.1092769428066784 rel_E_err 8.5352489027459385D-12 k, q, energy_removed_layers before adjustment is 1152 0.99999855280771621 6.0259953529943521E+046 k, q, energy_removed_layers after adjustment is 1334 0.99998595941767887 2.1190486550816054E+047 Layers above q= 0.99998595941767887 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.6621093750000 max vel inside fraction of cutoff 1571.4693360419535 max c/cs inside fraction of cutoff 0.55323380358737884 average v/vesc outside cutoff 0.77066147317162514 Kinetic plus potential energy outside cutoff 2.1190486550816054E+047 mass inside cutoff 1334 51.678014334125074 relax counter 0 log max v [km/s]= 3.9733327354374124 check gamma integral -1.6656026019039233E-002 retry: logT > hydro_mtx_max_allowed_logT 1054 2511 retry: logT < hydro_mtx_min_allowed_logT 1054 2515 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1047 2518 2520 9.409730 2.700E+05 -13.565713 14.041385 51.678740 0.000000 0.000000 0.000000 0.213409 -1.311423 2547 57 -9.3711E+00 9.409730 -0.238906 9.539197 13.555775 -99.000000 51.678740 0.000000 0.048246 0.786591 0.608721 7 2.8821E+05 5.944310 6.202528 14.041372 14.382155 -7.076994 48.996427 0.000006 0.000002 0.436246 -0.789E+01 max increase log_rel_run_E_err -8.1046879451632989 rel_E_err 8.1179860917374585D-12 k, q, energy_removed_layers before adjustment is 1161 0.99999838661513929 7.5429282502874625E+046 k, q, energy_removed_layers after adjustment is 1335 0.99998580366707523 2.2239535087683509E+047 Layers above q= 0.99998580366707523 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.7929687500000 max vel inside fraction of cutoff 1580.4269289426645 max c/cs inside fraction of cutoff 0.55696122757181021 average v/vesc outside cutoff 0.78520735736449554 Kinetic plus potential energy outside cutoff 2.2239535087683509E+047 mass inside cutoff 1335 51.678006285130131 relax counter 0 log max v [km/s]= 3.9835204264060242 check gamma integral -1.6635434340803317E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1046 2521 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1037 2526 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1034 2530 2530 9.409061 2.700E+05 -13.578182 14.023900 51.678740 0.000000 0.000000 0.000000 0.213409 -1.313860 2547 60 -9.4824E+00 9.409061 -0.239065 9.531635 13.550822 -99.000000 51.678740 0.000000 0.048246 0.786591 0.608630 5 2.8821E+05 5.942103 6.201861 14.023886 14.355784 -7.076039 48.996427 0.000006 0.000002 0.436239 -0.791E+01 retry log_rel_run_E_err -8.1001179877167395 rel_E_err 8.5889088604678912D-12 k, q, energy_removed_layers before adjustment is 1172 0.99999820497000858 8.9940170993420667E+046 k, q, energy_removed_layers after adjustment is 1335 0.99998580366707523 2.3226294384305440E+047 Layers above q= 0.99998580366707523 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8357.9160156250000 max vel inside fraction of cutoff 1589.0174822532608 max c/cs inside fraction of cutoff 0.56054638285090141 average v/vesc outside cutoff 0.79986392450023558 Kinetic plus potential energy outside cutoff 2.3226294384305440E+047 mass inside cutoff 1335 51.678006285130131 relax counter 0 log max v [km/s]= 4.0074834832829351 check gamma integral -1.6615023383864020E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1034 2532 retry: logT < hydro_mtx_min_allowed_logT 1050 2536 retry: logT < hydro_mtx_min_allowed_logT 1026 2539 2540 9.408543 2.699E+05 -13.866694 14.010399 51.678740 0.000000 0.000000 0.000000 0.213409 -1.315745 2547 63 -9.5937E+00 9.408543 -0.239189 9.525788 13.546989 -99.000000 51.678740 0.000000 0.048245 0.786591 0.608558 6 2.8821E+05 5.940397 6.201346 14.010385 14.335379 -7.075303 48.996427 0.000006 0.000002 0.436234 -0.793E+01 max increase log_rel_run_E_err -8.0955853295547193 rel_E_err 8.4711097723457544D-12 k, q, energy_removed_layers before adjustment is 1179 0.99999807185393519 1.0106090324617892E+047 k, q, energy_removed_layers after adjustment is 1336 0.99998564673803436 2.3973101638099886E+047 Layers above q= 0.99998564673803436 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.0136718750000 max vel inside fraction of cutoff 1595.6185208803133 max c/cs inside fraction of cutoff 0.56330819440547086 average v/vesc outside cutoff 0.80959082366978929 Kinetic plus potential energy outside cutoff 2.3973101638099886E+047 mass inside cutoff 1336 51.677998175235039 relax counter 0 log max v [km/s]= 4.0098306999646125 check gamma integral -1.6598892885231583E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1080 2543 retry: abs(dlogT) > hydro_mtx_max_allowed 1019 2547 2550 9.408015 2.699E+05 -13.711651 13.996643 51.678740 0.000000 0.000000 0.000000 0.213409 -1.317670 2547 65 -9.4039E+00 9.408015 -0.239315 9.519822 13.543076 -99.000000 51.678740 0.000000 0.048244 0.786591 0.608486 7 2.8821E+05 5.938656 6.200822 13.996629 14.314552 -7.074554 48.996427 0.000006 0.000002 0.436229 -0.796E+01 max increase log_rel_run_E_err -8.0911876624601593 rel_E_err 7.8531191617071840D-12 save photos/x550 for model 2550 k, q, energy_removed_layers before adjustment is 1184 0.99999790592618931 1.1293616405344301E+047 k, q, energy_removed_layers after adjustment is 1336 0.99998564673803436 2.4719338118410952E+047 Layers above q= 0.99998564673803436 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.1093750000000 max vel inside fraction of cutoff 1602.3157604347757 max c/cs inside fraction of cutoff 0.56611651958733855 average v/vesc outside cutoff 0.82057633576283906 Kinetic plus potential energy outside cutoff 2.4719338118410952E+047 mass inside cutoff 1336 51.677998175235039 relax counter 0 log max v [km/s]= 4.0239277603763171 check gamma integral -1.6582121045412491E-002 retry: logT > hydro_mtx_max_allowed_logT 1012 2552 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1018 2555 retry: logT < hydro_mtx_min_allowed_logT 1038 2558 2560 9.407493 2.698E+05 -13.936645 13.983052 51.678740 0.000000 0.000000 0.000000 0.213409 -1.319575 2547 68 -9.6735E+00 9.407493 -0.239439 9.513919 13.539202 -99.000000 51.678740 0.000000 0.048244 0.786591 0.608414 6 2.8821E+05 5.936933 6.200303 13.983038 14.293936 -7.073816 48.996427 0.000006 0.000002 0.436224 -0.798E+01 hold log_rel_run_E_err -8.0868029355218685 rel_E_err 8.4300290096878771D-12 k, q, energy_removed_layers before adjustment is 1188 0.99999777338301443 1.2304295054474054E+047 k, q, energy_removed_layers after adjustment is 1337 0.99998548854007951 2.5443207239012754E+047 Layers above q= 0.99998548854007951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.2070312500000 max vel inside fraction of cutoff 1608.9044574060631 max c/cs inside fraction of cutoff 0.56888552386562963 average v/vesc outside cutoff 0.82976429670346441 Kinetic plus potential energy outside cutoff 2.5443207239012754E+047 mass inside cutoff 1337 51.677989999764065 relax counter 0 log max v [km/s]= 4.0320730570920338 check gamma integral -1.6565216176558994E-002 retry: logT < hydro_mtx_min_allowed_logT 1000 2563 retry: logT > hydro_mtx_max_allowed_logT 1004 2569 2570 9.406978 2.698E+05 -13.705393 13.969685 51.678740 0.000000 0.000000 0.000000 0.213409 -1.321452 2547 70 -9.4838E+00 9.406978 -0.239561 9.508106 13.535385 -99.000000 51.678740 0.000000 0.048243 0.786591 0.608343 6 2.8821E+05 5.935236 6.199794 13.969670 14.273623 -7.073092 48.996427 0.000006 0.000002 0.436219 -0.800E+01 max increase log_rel_run_E_err -8.0824350133452256 rel_E_err 8.1232758245329840D-12 k, q, energy_removed_layers before adjustment is 1192 0.99999764162446447 1.3316997766197510E+047 k, q, energy_removed_layers after adjustment is 1337 0.99998548854007951 2.6142940844356152E+047 Layers above q= 0.99998548854007951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.2988281250000 max vel inside fraction of cutoff 1615.3584034522364 max c/cs inside fraction of cutoff 0.57160387233068710 average v/vesc outside cutoff 0.83998406983329976 Kinetic plus potential energy outside cutoff 2.6142940844356152E+047 mass inside cutoff 1337 51.677989999764065 relax counter 0 log max v [km/s]= 4.0507155107437036 check gamma integral -1.6548263891949529E-002 retry: logT < hydro_mtx_min_allowed_logT 994 2573 retry: logT < hydro_mtx_min_allowed_logT 987 2578 2580 9.406239 2.697E+05 -13.828661 13.950525 51.678740 0.000000 0.000000 0.000000 0.213409 -1.324148 2547 72 -9.2940E+00 9.406239 -0.239736 9.499759 13.529901 -99.000000 51.678740 0.000000 0.048242 0.786591 0.608241 6 2.8821E+05 5.932800 6.199064 13.950509 14.244446 -7.072054 48.996427 0.000006 0.000002 0.436213 -0.803E+01 max increase log_rel_run_E_err -8.0780685106983388 rel_E_err 8.1621362235117620D-12 k, q, energy_removed_layers before adjustment is 1199 0.99999745188387501 1.4638893405033890E+047 k, q, energy_removed_layers after adjustment is 1337 0.99998548854007951 2.7122581984787210E+047 Layers above q= 0.99998548854007951 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.4355468750000 max vel inside fraction of cutoff 1624.5618362561261 max c/cs inside fraction of cutoff 0.57549068358084232 average v/vesc outside cutoff 0.85430975505461215 Kinetic plus potential energy outside cutoff 2.7122581984787210E+047 mass inside cutoff 1337 51.677989999764065 relax counter 0 log max v [km/s]= 4.0608581846990104 check gamma integral -1.6523397884238913E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 996 2581 retry: logT > hydro_mtx_max_allowed_logT 980 2586 retry: logT < hydro_mtx_min_allowed_logT 977 2589 2590 9.405686 2.697E+05 -13.838291 13.936196 51.678740 0.000000 0.000000 0.000000 0.213409 -1.326169 2547 75 -9.5637E+00 9.405686 -0.239867 9.493507 13.525791 -99.000000 51.678740 0.000000 0.048242 0.786591 0.608164 6 2.8821E+05 5.930975 6.198518 13.936181 14.222579 -7.071279 48.996427 0.000006 0.000002 0.436209 -0.805E+01 max increase log_rel_run_E_err -8.0738031899743916 rel_E_err 8.3419855563925902D-12 k, q, energy_removed_layers before adjustment is 1204 0.99999731023327865 1.5612375945524286E+047 k, q, energy_removed_layers after adjustment is 1338 0.99998532872475832 2.7840333522541238E+047 Layers above q= 0.99998532872475832 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.5351562500000 max vel inside fraction of cutoff 1631.4103796213260 max c/cs inside fraction of cutoff 0.57839080696091560 average v/vesc outside cutoff 0.86307457475703964 Kinetic plus potential energy outside cutoff 2.7840333522541238E+047 mass inside cutoff 1338 51.677981740709654 relax counter 0 log max v [km/s]= 4.0687445093046062 check gamma integral -1.6504361889163592E-002 retry: logT > hydro_mtx_max_allowed_logT 972 2593 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 990 2595 retry: logT < hydro_mtx_min_allowed_logT 967 2599 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.405242 2.697E+05 -13.903509 13.924728 51.678740 0.000000 0.000000 0.000000 0.213409 -1.327789 2547 78 -9.6750E+00 9.405242 -0.239971 9.488497 13.522494 -99.000000 51.678740 0.000000 0.048242 0.786591 0.608103 6 2.8821E+05 5.929512 6.198079 13.924712 14.205047 -7.070658 48.996427 0.000006 0.000002 0.436205 -0.807E+01 max increase log_rel_run_E_err -8.0696105192065932 rel_E_err 8.2214173124783725D-12 save LOGS/profile12.data for model 2600 save photos/x600 for model 2600 k, q, energy_removed_layers before adjustment is 1208 0.99999717762302631 1.6380573155403215E+047 k, q, energy_removed_layers after adjustment is 1338 0.99998532872475832 2.8404474367658156E+047 Layers above q= 0.99998532872475832 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.6152343750000 max vel inside fraction of cutoff 1636.8711032716201 max c/cs inside fraction of cutoff 0.58070806814349907 average v/vesc outside cutoff 0.87126631538732169 Kinetic plus potential energy outside cutoff 2.8404474367658156E+047 mass inside cutoff 1338 51.677981740709654 relax counter 0 log max v [km/s]= 4.0789388222449272 check gamma integral -1.6488854100080975E-002 retry: logT < hydro_mtx_min_allowed_logT 961 2604 retry: logT > hydro_mtx_max_allowed_logT 964 960 2608 2610 9.404730 2.696E+05 -14.012853 13.911487 51.678740 0.000000 0.000000 0.000000 0.213409 -1.329663 2547 80 -9.4852E+00 9.404730 -0.240092 9.482705 13.518682 -99.000000 51.678740 0.000000 0.048241 0.786591 0.608032 6 2.8821E+05 5.927821 6.197575 13.911471 14.184773 -7.069941 48.996427 0.000006 0.000002 0.436201 -0.809E+01 max increase log_rel_run_E_err -8.0653273519977517 rel_E_err 8.3222482389208937D-12 k, q, energy_removed_layers before adjustment is 1211 0.99999706199775695 1.7223613582650572E+047 k, q, energy_removed_layers after adjustment is 1339 0.99998516779559155 2.9044349503464258E+047 Layers above q= 0.99998516779559155 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.7070312500000 max vel inside fraction of cutoff 1643.1526788548415 max c/cs inside fraction of cutoff 0.58337903425937965 average v/vesc outside cutoff 0.87877475468718691 Kinetic plus potential energy outside cutoff 2.9044349503464258E+047 mass inside cutoff 1339 51.677973424093096 relax counter 0 log max v [km/s]= 4.0943438330818793 check gamma integral -1.6470644739399430E-002 retry: logT > hydro_mtx_max_allowed_logT 958 2612 retry: abs(dlogT) > hydro_mtx_max_allowe 950 2616 2620 9.404119 2.696E+05 -14.033563 13.895733 51.678740 0.000000 0.000000 0.000000 0.213409 -1.331896 2547 82 -9.2955E+00 9.404119 -0.240236 9.475803 13.514137 -99.000000 51.678740 0.000000 0.048241 0.786591 0.607947 10 2.8821E+05 5.925806 6.196976 13.895716 14.160606 -7.069090 48.996427 0.000006 0.000002 0.436197 -0.812E+01 max increase log_rel_run_E_err -8.0612326827723084 rel_E_err 8.2339776887445121D-12 k, q, energy_removed_layers before adjustment is 1214 0.99999691185237749 1.8177598884060894E+047 k, q, energy_removed_layers after adjustment is 1339 0.99998516779559155 2.9791970686992856E+047 Layers above q= 0.99998516779559155 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.8183593750000 max vel inside fraction of cutoff 1650.5943742120403 max c/cs inside fraction of cutoff 0.58655079002205046 average v/vesc outside cutoff 0.88955420903626947 Kinetic plus potential energy outside cutoff 2.9791970686992856E+047 mass inside cutoff 1339 51.677973424093096 relax counter 0 log max v [km/s]= 4.1086942444341865 check gamma integral -1.6448553641027527E-002 retry: logT < hydro_mtx_min_allowed_logT 947 2621 retry: logT < hydro_mtx_min_allowed_logT 988 2624 retry: logT < hydro_mtx_min_allowed_logT 934 2629 2630 9.403574 2.695E+05 -13.959568 13.881711 51.678740 0.000000 0.000000 0.000000 0.213409 -1.333888 2547 85 -9.5651E+00 9.403574 -0.240364 9.469651 13.510082 -99.000000 51.678740 0.000000 0.048240 0.786591 0.607872 6 2.8821E+05 5.924010 6.196441 13.881694 14.139056 -7.068333 48.996427 0.000006 0.000002 0.436193 -0.814E+01 max increase log_rel_run_E_err -8.0571603905895852 rel_E_err 8.1446729978296170D-12 k, q, energy_removed_layers before adjustment is 1217 0.99999676378911939 1.9104290650539133E+047 k, q, energy_removed_layers after adjustment is 1339 0.99998516779559155 3.0443027381041636E+047 Layers above q= 0.99998516779559155 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.9140625000000 max vel inside fraction of cutoff 1657.1890163795160 max c/cs inside fraction of cutoff 0.58936828411517650 average v/vesc outside cutoff 0.89895491120543336 Kinetic plus potential energy outside cutoff 3.0443027381041636E+047 mass inside cutoff 1339 51.677973424093096 relax counter 0 log max v [km/s]= 4.1192547079341564 check gamma integral -1.6428501224519158E-002 retry: logT > hydro_mtx_max_allowed_logT 937 2632 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 933 2635 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 930 2638 2640 9.403187 2.695E+05 -14.002539 13.871748 51.678740 0.000000 0.000000 0.000000 0.213409 -1.335306 2547 88 -9.6764E+00 9.403187 -0.240454 9.465275 13.507197 -99.000000 51.678740 0.000000 0.048240 0.786591 0.607818 6 2.8821E+05 5.922732 6.196061 13.871731 14.123720 -7.067796 48.996427 0.000006 0.000002 0.436191 -0.815E+01 max increase log_rel_run_E_err -8.0531243000121151 rel_E_err 8.3306076327621478D-12 k, q, energy_removed_layers before adjustment is 1219 0.99999666429359491 1.9730781292666520E+047 k, q, energy_removed_layers after adjustment is 1340 0.99998500526559109 3.0899143744747885E+047 Layers above q= 0.99998500526559109 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8358.9824218750000 max vel inside fraction of cutoff 1661.8588161739422 max c/cs inside fraction of cutoff 0.59136724815056918 average v/vesc outside cutoff 0.90359092290318621 Kinetic plus potential energy outside cutoff 3.0899143744747885E+047 mass inside cutoff 1340 51.677965024747465 relax counter 0 log max v [km/s]= 4.1266063328721732 check gamma integral -1.6414027921664281E-002 retry: logT < hydro_mtx_min_allowed_logT 927 2643 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 923 2647 2650 9.402735 2.695E+05 -13.916737 13.860141 51.678740 0.000000 0.000000 0.000000 0.213409 -1.336960 2547 90 -9.4866E+00 9.402735 -0.240560 9.460171 13.503830 -99.000000 51.678740 0.000000 0.048240 0.786591 0.607755 9 2.8821E+05 5.921242 6.195618 13.860124 14.105829 -7.067170 48.996427 0.000006 0.000002 0.436188 -0.817E+01 max increase log_rel_run_E_err -8.0491638567380193 rel_E_err 8.0790155671200439D-12 save photos/x650 for model 2650 k, q, energy_removed_layers before adjustment is 1221 0.99999656490963940 2.0393311639502146E+047 k, q, energy_removed_layers after adjustment is 1340 0.99998500526559109 3.1422428460392622E+047 Layers above q= 0.99998500526559109 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.0625000000000 max vel inside fraction of cutoff 1667.2824542510587 max c/cs inside fraction of cutoff 0.59369297035450586 average v/vesc outside cutoff 0.91109339012580914 Kinetic plus potential energy outside cutoff 3.1422428460392622E+047 mass inside cutoff 1340 51.677965024747465 relax counter 0 log max v [km/s]= 4.1404338289977263 check gamma integral -1.6396928426439538E-002 retry: logT > hydro_mtx_max_allowed_logT 924 2653 retry: logT < hydro_mtx_min_allowed_logT 915 2655 retry: logT < hydro_mtx_min_allowed_logT 912 2658 2660 9.402227 2.694E+05 -14.051112 13.847093 51.678740 0.000000 0.000000 0.000000 0.213409 -1.338822 2547 93 -9.5979E+00 9.402227 -0.240679 9.454427 13.500039 -99.000000 51.678740 0.000000 0.048239 0.786591 0.607685 6 2.8821E+05 5.919565 6.195121 13.847076 14.085687 -7.066468 48.996427 0.000006 0.000002 0.436185 -0.819E+01 max increase log_rel_run_E_err -8.0452355071983881 rel_E_err 8.4212859405574175D-12 k, q, energy_removed_layers before adjustment is 1224 0.99999644852248393 2.1028921981920801E+047 k, q, energy_removed_layers after adjustment is 1344 0.99998414606752506 3.2012052134862481E+047 Layers above q= 0.99998414606752506 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.1523437500000 max vel inside fraction of cutoff 1673.3572548952125 max c/cs inside fraction of cutoff 0.59630313966632131 average v/vesc outside cutoff 0.91305973759841863 Kinetic plus potential energy outside cutoff 3.2012052134862481E+047 mass inside cutoff 1344 51.677920622474062 relax counter 0 log max v [km/s]= 4.1494658814684335 check gamma integral -1.6377401660237094E-002 retry: logT < hydro_mtx_min_allowed_logT 908 2662 retry: logT < hydro_mtx_min_allowed_logT 904 2666 2670 9.401748 2.694E+05 -13.924008 13.834831 51.678740 0.000000 0.000000 0.000000 0.213409 -1.340575 2547 95 -9.4081E+00 9.401748 -0.240791 9.449021 13.496469 -99.000000 51.678740 0.000000 0.048239 0.786591 0.607618 7 2.8821E+05 5.917986 6.194655 13.834814 14.066729 -7.065808 48.996427 0.000006 0.000002 0.436182 -0.821E+01 max increase log_rel_run_E_err -8.0413316516718556 rel_E_err 8.2198150385230192D-12 k, q, energy_removed_layers before adjustment is 1227 0.99999633226417106 2.1740302230297795E+047 k, q, energy_removed_layers after adjustment is 1345 0.99998388349734157 3.2559502914762756E+047 Layers above q= 0.99998388349734157 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.2363281250000 max vel inside fraction of cutoff 1679.0458036032624 max c/cs inside fraction of cutoff 0.59875232893100849 average v/vesc outside cutoff 0.91738200868909769 Kinetic plus potential energy outside cutoff 3.2559502914762756E+047 mass inside cutoff 1345 51.677907053177840 relax counter 0 log max v [km/s]= 4.1667510514483981 check gamma integral -1.6358752998963898E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 900 2671 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 910 2675 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 942 2678 2680 9.401228 2.694E+05 -14.087967 13.821508 51.678740 0.000000 0.000000 0.000000 0.213409 -1.342482 2547 98 -9.5194E+00 9.401228 -0.240913 9.443141 13.492584 -99.000000 51.678740 0.000000 0.048239 0.786591 0.607546 6 2.8821E+05 5.916269 6.194145 13.821490 14.046097 -7.065091 48.996427 0.000006 0.000002 0.436179 -0.823E+01 max increase log_rel_run_E_err -8.0374387437963453 rel_E_err 8.0995649872126544D-12 k, q, energy_removed_layers before adjustment is 1230 0.99999616774450295 2.2581184534434498E+047 k, q, energy_removed_layers after adjustment is 1345 0.99998388349734157 3.3144503448302196E+047 Layers above q= 0.99998388349734157 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.3300781250000 max vel inside fraction of cutoff 1685.2043676479332 max c/cs inside fraction of cutoff 0.60140936492743213 average v/vesc outside cutoff 0.92530315999430135 Kinetic plus potential energy outside cutoff 3.3144503448302196E+047 mass inside cutoff 1345 51.677907053177840 relax counter 0 log max v [km/s]= 4.1761793080321228 check gamma integral -1.6338164315603573E-002 retry: logT < hydro_mtx_min_allowed_logT 888 2682 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 886 2687 2690 9.400611 2.693E+05 -14.041531 13.805726 51.678740 0.000000 0.000000 0.000000 0.213409 -1.344747 2547 100 -9.3297E+00 9.400611 -0.241057 9.436165 13.487972 -99.000000 51.678740 0.000000 0.048238 0.786591 0.607460 8 2.8821E+05 5.914232 6.193545 13.805707 14.021613 -7.064244 48.996427 0.000006 0.000002 0.436175 -0.826E+01 max increase log_rel_run_E_err -8.0336245764583705 rel_E_err 7.9658957503204034D-12 k, q, energy_removed_layers before adjustment is 1232 0.99999605032174055 2.3344266873887946E+047 k, q, energy_removed_layers after adjustment is 1346 0.99998361717373019 3.3825831846154484E+047 Layers above q= 0.99998361717373019 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.4375000000000 max vel inside fraction of cutoff 1692.4694225065557 max c/cs inside fraction of cutoff 0.60455117187536322 average v/vesc outside cutoff 0.92915099788378164 Kinetic plus potential energy outside cutoff 3.3825831846154484E+047 mass inside cutoff 1346 51.677893289909186 relax counter 0 log max v [km/s]= 4.1928532264666591 check gamma integral -1.6313333207651454E-002 retry: logT > hydro_mtx_max_allowed_logT 881 2691 retry: logT > hydro_mtx_max_allowed_logT 880 2693 retry: logT > hydro_mtx_max_allowed_logT 877 2696 retry: logT > hydro_mtx_max_allowed_logT 874 2699 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.400192 2.693E+05 -13.998590 13.795046 51.678740 0.000000 0.000000 0.000000 0.213409 -1.346281 2547 104 -9.7420E+00 9.400192 -0.241154 9.431438 13.484845 -99.000000 51.678740 0.000000 0.048238 0.786591 0.607402 6 2.8821E+05 5.912851 6.193137 13.795027 14.005018 -7.063671 48.996427 0.000005 0.000002 0.436173 -0.828E+01 max increase log_rel_run_E_err -8.0297778779145865 rel_E_err 8.3470673369828469D-12 save LOGS/profile13.data for model 2700 save photos/x700 for model 2700 k, q, energy_removed_layers before adjustment is 1234 0.99999591963059076 2.3974706632646745E+047 k, q, energy_removed_layers after adjustment is 1347 0.99998339429993444 3.4280819461155748E+047 Layers above q= 0.99998339429993444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.5097656250000 max vel inside fraction of cutoff 1697.3680695494818 max c/cs inside fraction of cutoff 0.60667407087498304 average v/vesc outside cutoff 0.93248611545634252 Kinetic plus potential energy outside cutoff 3.4280819461155748E+047 mass inside cutoff 1347 51.677881772072254 relax counter 0 log max v [km/s]= 4.1958100902637936 check gamma integral -1.6296254233612174E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 870 2702 retry: logT > hydro_mtx_max_allowed_logT 866 2707 2710 9.399820 2.692E+05 -14.057231 13.785564 51.678740 0.000000 0.000000 0.000000 0.213409 -1.347646 2547 106 -9.5522E+00 9.399820 -0.241240 9.427237 13.482064 -99.000000 51.678740 0.000000 0.048238 0.786591 0.607350 9 2.8821E+05 5.911624 6.192776 13.785545 13.990266 -7.063163 48.996427 0.000005 0.000002 0.436171 -0.829E+01 max increase log_rel_run_E_err -8.0260288561225615 rel_E_err 8.0648592653931264D-12 k, q, energy_removed_layers before adjustment is 1235 0.99999585291854043 2.4413091374693732E+047 k, q, energy_removed_layers after adjustment is 1347 0.99998339429993444 3.4679665612546638E+047 Layers above q= 0.99998339429993444 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.5781250000000 max vel inside fraction of cutoff 1701.7055415452653 max c/cs inside fraction of cutoff 0.60855680895426745 average v/vesc outside cutoff 0.93777596206939784 Kinetic plus potential energy outside cutoff 3.4679665612546638E+047 mass inside cutoff 1347 51.677881772072254 relax counter 0 log max v [km/s]= 4.2148730372593990 check gamma integral -1.6280903095750639E-002 retry: logT > hydro_mtx_max_allowed_logT 862 2711 retry: logT < hydro_mtx_min_allowed_logT 859 2715 2720 9.399343 2.692E+05 -14.115548 13.773410 51.678740 0.000000 0.000000 0.000000 0.213409 -1.349397 2547 108 -9.3625E+00 9.399343 -0.241351 9.421846 13.478495 -99.000000 51.678740 0.000000 0.048237 0.786591 0.607283 9 2.8821E+05 5.910050 6.192314 13.773390 13.971333 -7.062512 48.996427 0.000005 0.000002 0.436169 -0.831E+01 max increase log_rel_run_E_err -8.0222456209043784 rel_E_err 8.3464613541488374D-12 k, q, energy_removed_layers before adjustment is 1237 0.99999572032611328 2.5103029995896457E+047 k, q, energy_removed_layers after adjustment is 1348 0.99998316892272820 3.5184130813927396E+047 Layers above q= 0.99998316892272820 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.6621093750000 max vel inside fraction of cutoff 1707.2480305996860 max c/cs inside fraction of cutoff 0.61096681728676050 average v/vesc outside cutoff 0.94165612271508559 Kinetic plus potential energy outside cutoff 3.5184130813927396E+047 mass inside cutoff 1348 51.677870124862231 relax counter 0 log max v [km/s]= 4.2311977391959177 check gamma integral -1.6260971345408770E-002 retry: logT < hydro_mtx_min_allowed_logT 862 2721 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 850 2723 retry: adjust_correction failed in eval_equations -- give up in solver 2725 retry: logT < hydro_mtx_min_allowed_logT 918 2728 2730 9.398998 2.692E+05 -14.054623 13.764628 51.678740 0.000000 0.000000 0.000000 0.213409 -1.350665 2547 112 -9.7748E+00 9.398998 -0.241431 9.417947 13.475913 -99.000000 51.678740 0.000000 0.048237 0.786591 0.607235 6 2.8821E+05 5.908911 6.191978 13.764609 13.957636 -7.062042 48.996427 0.000005 0.000002 0.436167 -0.833E+01 max increase log_rel_run_E_err -8.0185715683058838 rel_E_err 8.0713827633406714D-12 k, q, energy_removed_layers before adjustment is 1238 0.99999565451228412 2.5521595849720366E+047 k, q, energy_removed_layers after adjustment is 1348 0.99998316892272820 3.5544617884547493E+047 Layers above q= 0.99998316892272820 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.7226562500000 max vel inside fraction of cutoff 1711.2413032737647 max c/cs inside fraction of cutoff 0.61270607298962798 average v/vesc outside cutoff 0.94639825399796185 Kinetic plus potential energy outside cutoff 3.5544617884547493E+047 mass inside cutoff 1348 51.677870124862231 relax counter 0 log max v [km/s]= 4.2307731268908215 check gamma integral -1.6246389725977806E-002 retry: logT < hydro_mtx_min_allowed_logT 851 2734 retry: logT < hydro_mtx_min_allowed_logT 839 2737 2740 9.398603 2.691E+05 -14.107684 13.754570 51.678740 0.000000 0.000000 0.000000 0.213409 -1.352118 2547 114 -9.5850E+00 9.398603 -0.241523 9.413478 13.472951 -99.000000 51.678740 0.000000 0.048237 0.786591 0.607180 6 2.8821E+05 5.907605 6.191595 13.754550 13.941931 -7.061504 48.996427 0.000005 0.000002 0.436165 -0.834E+01 max increase log_rel_run_E_err -8.0148790638074203 rel_E_err 8.3856030668228433D-12 k, q, energy_removed_layers before adjustment is 1239 0.99999558778830733 2.5974064334506636E+047 k, q, energy_removed_layers after adjustment is 1348 0.99998316892272820 3.5952195531406309E+047 Layers above q= 0.99998316892272820 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.7910156250000 max vel inside fraction of cutoff 1715.8034014082987 max c/cs inside fraction of cutoff 0.61469608458531433 average v/vesc outside cutoff 0.95176896022695079 Kinetic plus potential energy outside cutoff 3.5952195531406309E+047 mass inside cutoff 1348 51.677870124862231 relax counter 0 log max v [km/s]= 4.2452213441324860 check gamma integral -1.6229500658027037E-002 retry: logT < hydro_mtx_min_allowed_logT 836 2742 retry: logT < hydro_mtx_min_allowed_logT 833 2745 retry: logT < hydro_mtx_min_allowed_logT 830 2750 2750 9.398165 2.691E+05 -14.096209 13.743466 51.678740 0.000000 0.000000 0.000000 0.213409 -1.353724 2547 117 -9.6963E+00 9.398165 -0.241624 9.408538 13.469676 -99.000000 51.678740 0.000000 0.048237 0.786591 0.607119 5 2.8821E+05 5.906162 6.191169 13.743446 13.924570 -7.060910 48.996427 0.000005 0.000002 0.436163 -0.836E+01 retry log_rel_run_E_err -8.0112624370055929 rel_E_err 8.0005855285292479D-12 save photos/x750 for model 2750 k, q, energy_removed_layers before adjustment is 1241 0.99999547593238203 2.6474737042099033E+047 k, q, energy_removed_layers after adjustment is 1348 0.99998316892272820 3.6395685146283791E+047 Layers above q= 0.99998316892272820 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.8671875000000 max vel inside fraction of cutoff 1720.8254620113960 max c/cs inside fraction of cutoff 0.61689045629465522 average v/vesc outside cutoff 0.95762447667953710 Kinetic plus potential energy outside cutoff 3.6395685146283791E+047 mass inside cutoff 1348 51.677870124862231 relax counter 0 log max v [km/s]= 4.2581258098959456 check gamma integral -1.6210622465676762E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 827 2753 retry: logT < hydro_mtx_min_allowed_logT 824 2758 2760 9.397688 2.691E+05 -14.001375 13.731352 51.678740 0.000000 0.000000 0.000000 0.213409 -1.355480 2547 119 -9.5066E+00 9.397688 -0.241735 9.403143 13.466097 -99.000000 51.678740 0.000000 0.048237 0.786591 0.607052 7 2.8821E+05 5.904586 6.190707 13.731331 13.905605 -7.060262 48.996427 0.000005 0.000002 0.436161 -0.838E+01 max increase log_rel_run_E_err -8.0076828057098428 rel_E_err 7.9878736034136452D-12 k, q, energy_removed_layers before adjustment is 1243 0.99999538636353635 2.6975095964561553E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998294104192476 3.6874432639564814E+047 Layers above q= 0.99998294104192476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8359.9492187500000 max vel inside fraction of cutoff 1726.2869083173468 max c/cs inside fraction of cutoff 0.61928125572550541 average v/vesc outside cutoff 0.96098706252439337 Kinetic plus potential energy outside cutoff 3.6874432639564814E+047 mass inside cutoff 1349 51.677858348269453 relax counter 0 log max v [km/s]= 4.2710516429752756 check gamma integral -1.6189747703492213E-002 retry: logT < hydro_mtx_min_allowed_logT 820 2761 retry: logT > hydro_mtx_max_allowed_logT 817 2764 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 842 2767 2770 9.397348 2.690E+05 -14.199276 13.722743 51.678740 0.000000 0.000000 0.000000 0.213409 -1.356729 2547 122 -9.7762E+00 9.397348 -0.241813 9.399305 13.463550 -99.000000 51.678740 0.000000 0.048236 0.786591 0.607005 6 2.8821E+05 5.903465 6.190379 13.722723 13.892112 -7.059802 48.996427 0.000005 0.000002 0.436160 -0.839E+01 max increase log_rel_run_E_err -8.0041470781991286 rel_E_err 8.2246030129241926D-12 k, q, energy_removed_layers before adjustment is 1245 0.99999529526536279 2.7398967490210531E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998294104192476 3.7210039732961036E+047 Layers above q= 0.99998294104192476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.0078125000000 max vel inside fraction of cutoff 1730.1571854083181 max c/cs inside fraction of cutoff 0.62097827960155039 average v/vesc outside cutoff 0.96538478165329789 Kinetic plus potential energy outside cutoff 3.7210039732961036E+047 mass inside cutoff 1349 51.677858348269453 relax counter 0 log max v [km/s]= 4.2744630580728291 check gamma integral -1.6174735894299908E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 834 2773 retry: logT < hydro_mtx_min_allowed_logT 808 2776 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin retry: adjust_correction failed in eval_equations -- give up in solver 2779 2780 9.397044 2.690E+05 -14.202861 13.715024 51.678740 0.000000 0.000000 0.000000 0.213409 -1.357850 2547 125 -9.8875E+00 9.397044 -0.241884 9.395861 13.461264 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606962 5 2.8821E+05 5.902459 6.190085 13.715003 13.880001 -7.059390 48.996427 0.000005 0.000002 0.436159 -0.841E+01 max increase log_rel_run_E_err -8.0006188280516817 rel_E_err 8.2200346523273558D-12 k, q, energy_removed_layers before adjustment is 1246 0.99999524913636062 2.7693796437473835E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998294104192476 3.7507762910474143E+047 Layers above q= 0.99998294104192476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.0585937500000 max vel inside fraction of cutoff 1733.6204230238291 max c/cs inside fraction of cutoff 0.62249879710418887 average v/vesc outside cutoff 0.96929265525378261 Kinetic plus potential energy outside cutoff 3.7507762910474143E+047 mass inside cutoff 1349 51.677858348269453 relax counter 0 log max v [km/s]= 4.2856334694342424 check gamma integral -1.6161146722624965E-002 retry: logT < hydro_mtx_min_allowed_logT 804 2784 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 799 2788 2790 9.396714 2.690E+05 -14.245271 13.706677 51.678740 0.000000 0.000000 0.000000 0.213409 -1.359063 2547 127 -9.6977E+00 9.396714 -0.241960 9.392134 13.458789 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606916 6 2.8821E+05 5.901370 6.189765 13.706656 13.866893 -7.058945 48.996427 0.000005 0.000002 0.436157 -0.842E+01 max increase log_rel_run_E_err -7.9970695851639855 rel_E_err 8.3687413881587089D-12 k, q, energy_removed_layers before adjustment is 1248 0.99999515565531016 2.8127406046063234E+047 k, q, energy_removed_layers after adjustment is 1349 0.99998294104192476 3.7826254331051021E+047 Layers above q= 0.99998294104192476 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.1171875000000 max vel inside fraction of cutoff 1737.3570110488799 max c/cs inside fraction of cutoff 0.62414143197507377 average v/vesc outside cutoff 0.97348024746513151 Kinetic plus potential energy outside cutoff 3.7826254331051021E+047 mass inside cutoff 1349 51.677858348269453 relax counter 0 log max v [km/s]= 4.2970307699495294 check gamma integral -1.6146320260505186E-002 retry: logT < hydro_mtx_min_allowed_logT 796 2792 retry: logT < hydro_mtx_min_allowed_logT 793 2795 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 884 2800 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 9.396373 2.690E+05 -14.189668 13.698061 51.678740 0.000000 0.000000 0.000000 0.213409 -1.360317 2547 130 -9.8090E+00 9.396373 -0.242038 9.388283 13.456231 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606868 5 2.8821E+05 5.900245 6.189435 13.698040 13.853349 -7.058485 48.996427 0.000005 0.000002 0.436156 -0.843E+01 retry log_rel_run_E_err -7.9935912638201012 rel_E_err 7.9826866885478358D-12 save LOGS/profile14.data for model 2800 save photos/x800 for model 2800 k, q, energy_removed_layers before adjustment is 1249 0.99999509857925450 2.8451714932491894E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998271049865339 3.8152279148286663E+047 Layers above q= 0.99998271049865339 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.1738281250000 max vel inside fraction of cutoff 1741.2054157683410 max c/cs inside fraction of cutoff 0.62583551180706776 average v/vesc outside cutoff 0.97506102828050611 Kinetic plus potential energy outside cutoff 3.8152279148286663E+047 mass inside cutoff 1350 51.677846434083690 relax counter 0 log max v [km/s]= 4.3043032859126535 check gamma integral -1.6130867661165060E-002 retry: logT < hydro_mtx_min_allowed_logT 787 2804 retry: logT < hydro_mtx_min_allowed_logT 784 2808 2810 9.395976 2.689E+05 -14.212347 13.688039 51.678740 0.000000 0.000000 0.000000 0.213409 -1.361778 2547 132 -9.6192E+00 9.395976 -0.242130 9.383800 13.453251 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606813 6 2.8821E+05 5.898935 6.189051 13.688017 13.837579 -7.057951 48.996427 0.000005 0.000002 0.436155 -0.845E+01 max increase log_rel_run_E_err -7.9901623921165310 rel_E_err 7.8940060237812684D-12 k, q, energy_removed_layers before adjustment is 1251 0.99999498259428299 2.8935081248401944E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998271049865339 3.8521557924847348E+047 Layers above q= 0.99998271049865339 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.2421875000000 max vel inside fraction of cutoff 1745.6705177322854 max c/cs inside fraction of cutoff 0.62780399138339660 average v/vesc outside cutoff 0.97993614345256208 Kinetic plus potential energy outside cutoff 3.8521557924847348E+047 mass inside cutoff 1350 51.677846434083690 relax counter 0 log max v [km/s]= 4.3055255297990360 check gamma integral -1.6112703931526792E-002 retry: logT < hydro_mtx_min_allowed_logT 781 2812 retry: logT > hydro_mtx_max_allowed_logT 778 2816 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 862 2820 2820 9.395539 2.689E+05 -14.279404 13.676993 51.678740 0.000000 0.000000 0.000000 0.213409 -1.363390 2547 135 -9.7305E+00 9.395539 -0.242231 9.378854 13.449963 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606752 5 2.8821E+05 5.897490 6.188628 13.676971 13.820176 -7.057361 48.996427 0.000005 0.000002 0.436153 -0.847E+01 retry log_rel_run_E_err -7.9868119422898278 rel_E_err 7.9569018358386574D-12 k, q, energy_removed_layers before adjustment is 1253 0.99999485850808634 2.9472308102127850E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998271049865339 3.8915834683483342E+047 Layers above q= 0.99998271049865339 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.3164062500000 max vel inside fraction of cutoff 1750.5779022307056 max c/cs inside fraction of cutoff 0.62997109110980842 average v/vesc outside cutoff 0.98522097873710612 Kinetic plus potential energy outside cutoff 3.8915834683483342E+047 mass inside cutoff 1350 51.677846434083690 relax counter 0 log max v [km/s]= 4.3053178898303095 check gamma integral -1.6092449014140416E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 774 2823 retry: logT < hydro_mtx_min_allowed_logT 772 2826 retry: logT < hydro_mtx_min_allowed_logT 768 2829 2830 9.395196 2.689E+05 -14.231151 13.668369 51.678740 0.000000 0.000000 0.000000 0.213409 -1.364650 2547 138 -9.8418E+00 9.395196 -0.242309 9.374989 13.447392 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606704 6 2.8821E+05 5.896361 6.188297 13.668347 13.806575 -7.056902 48.996427 0.000005 0.000002 0.436152 -0.848E+01 max increase log_rel_run_E_err -7.9834376740031523 rel_E_err 7.8185962956447528D-12 k, q, energy_removed_layers before adjustment is 1254 0.99999479260427349 2.9793276772416170E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998271049865339 3.9215537746455032E+047 Layers above q= 0.99998271049865339 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.3750000000000 max vel inside fraction of cutoff 1754.3996439459490 max c/cs inside fraction of cutoff 0.63166138715644804 average v/vesc outside cutoff 0.98928822940877670 Kinetic plus potential energy outside cutoff 3.9215537746455032E+047 mass inside cutoff 1350 51.677846434083690 relax counter 0 log max v [km/s]= 4.3037086727458744 check gamma integral -1.6076462183292520E-002 retry: logT < hydro_mtx_min_allowed_logT 763 2833 retry: logT < hydro_mtx_min_allowed_logT 761 2837 retry: abs(dlogT) > hydro_mtx_max_allowed 758 2840 2840 9.394894 2.689E+05 -14.233759 13.660751 51.678740 0.000000 0.000000 0.000000 0.213409 -1.365764 2547 141 -9.9531E+00 9.394894 -0.242379 9.371571 13.445118 -99.000000 51.678740 0.000000 0.048236 0.786591 0.606661 5 2.8821E+05 5.895362 6.188005 13.660729 13.794548 -7.056495 48.996427 0.000005 0.000002 0.436151 -0.849E+01 retry log_rel_run_E_err -7.9800635452500037 rel_E_err 7.7623634344705791D-12 k, q, energy_removed_layers before adjustment is 1255 0.99999472598926276 3.0082406708093395E+047 k, q, energy_removed_layers after adjustment is 1350 0.99998271049865339 3.9474852821168519E+047 Layers above q= 0.99998271049865339 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.4257812500000 max vel inside fraction of cutoff 1757.7684834526485 max c/cs inside fraction of cutoff 0.63315328344687138 average v/vesc outside cutoff 0.99284014865724446 Kinetic plus potential energy outside cutoff 3.9474852821168519E+047 mass inside cutoff 1350 51.677846434083690 relax counter 0 log max v [km/s]= 4.3043345250767144 check gamma integral -1.6062214870260525E-002 retry: logT < hydro_mtx_min_allowed_logT 755 2844 retry: logT < hydro_mtx_min_allowed_logT 752 2849 2850 9.394585 2.688E+05 -14.343959 13.652967 51.678740 0.000000 0.000000 0.000000 0.213409 -1.366903 2547 143 -9.7633E+00 9.394585 -0.242450 9.368077 13.442792 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606618 6 2.8821E+05 5.894341 6.187709 13.652945 13.782249 -7.056081 48.996427 0.000005 0.000002 0.436150 -0.851E+01 max increase log_rel_run_E_err -7.9767905653659810 rel_E_err 8.1093725986000789D-12 save photos/x850 for model 2850 k, q, energy_removed_layers before adjustment is 1256 0.99999465861840409 3.0364103966545222E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998246930787282 3.9736397833272107E+047 Layers above q= 0.99998246930787282 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.4785156250000 max vel inside fraction of cutoff 1761.2037823992475 max c/cs inside fraction of cutoff 0.63467647014728767 average v/vesc outside cutoff 0.99315580474752474 Kinetic plus potential energy outside cutoff 3.9736397833272107E+047 mass inside cutoff 1351 51.677833969648070 relax counter 0 log max v [km/s]= 4.3064168525023963 check gamma integral -1.6047533977389596E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 749 2852 retry: logT < hydro_mtx_min_allowed_logT 750 2856 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 742 2860 2860 9.394268 2.688E+05 -14.198219 13.645009 51.678740 0.000000 0.000000 0.000000 0.213409 -1.368070 2547 146 -9.8746E+00 9.394268 -0.242523 9.364502 13.440411 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606574 5 2.8821E+05 5.893297 6.187404 13.644986 13.769665 -7.055657 48.996427 0.000005 0.000002 0.436149 -0.852E+01 retry log_rel_run_E_err -7.9735148175602069 rel_E_err 8.1098958281795728D-12 k, q, energy_removed_layers before adjustment is 1257 0.99999459341404717 3.0647618568245687E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998246930787282 3.9997698195980534E+047 Layers above q= 0.99998246930787282 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.5292968750000 max vel inside fraction of cutoff 1764.7087240554351 max c/cs inside fraction of cutoff 0.63623247474633260 average v/vesc outside cutoff 0.99675972624526921 Kinetic plus potential energy outside cutoff 3.9997698195980534E+047 mass inside cutoff 1351 51.677833969648070 relax counter 0 log max v [km/s]= 4.3049146019638460 check gamma integral -1.6032394303669713E-002 retry: logT < hydro_mtx_min_allowed_logT 740 2865 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 737 2868 2870 9.393898 2.688E+05 -14.205701 13.635689 51.678740 0.000000 0.000000 0.000000 0.213409 -1.369437 2547 148 -9.6848E+00 9.393898 -0.242608 9.360311 13.437620 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606522 6 2.8821E+05 5.892072 6.187048 13.635666 13.754913 -7.055162 48.996427 0.000005 0.000002 0.436147 -0.854E+01 max increase log_rel_run_E_err -7.9702651130664295 rel_E_err 7.8081150570980361D-12 k, q, energy_removed_layers before adjustment is 1259 0.99999446087615629 3.1077565189636613E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998246930787282 4.0299038780993477E+047 Layers above q= 0.99998246930787282 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.5917968750000 max vel inside fraction of cutoff 1768.8040447575504 max c/cs inside fraction of cutoff 0.63805307485406781 average v/vesc outside cutoff 1.0009372040834164 Kinetic plus potential energy outside cutoff 4.0299038780993477E+047 mass inside cutoff 1351 51.677833969648070 relax counter 0 log max v [km/s]= 4.3063726566369960 check gamma integral -1.6014497474327160E-002 retry: logT < hydro_mtx_min_allowed_logT 734 2873 retry: logT < hydro_mtx_min_allowed_logT 734 2876 2880 9.393459 2.687E+05 -14.111614 13.624683 51.678740 0.000000 0.000000 0.000000 0.213409 -1.371054 2547 150 -9.4951E+00 9.393459 -0.242708 9.355358 13.434319 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606460 9 2.8821E+05 5.890625 6.186627 13.624660 13.737474 -7.054577 48.996427 0.000005 0.000001 0.436146 -0.855E+01 max increase log_rel_run_E_err -7.9670734443363935 rel_E_err 7.6557034917872264D-12 k, q, energy_removed_layers before adjustment is 1260 0.99999439353205422 3.1397097915806472E+047 k, q, energy_removed_layers after adjustment is 1351 0.99998246930787282 4.0647992553054509E+047 Layers above q= 0.99998246930787282 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.6640625000000 max vel inside fraction of cutoff 1773.6270486218855 max c/cs inside fraction of cutoff 0.64020063823908302 average v/vesc outside cutoff 1.0058093708666722 Kinetic plus potential energy outside cutoff 4.0647992553054509E+047 mass inside cutoff 1351 51.677833969648070 relax counter 0 log max v [km/s]= 4.3089864435984939 check gamma integral -1.5993134312250062E-002 retry: logT < hydro_mtx_min_allowed_logT 728 2881 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 788 2885 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 722 2890 2890 9.392942 2.687E+05 -14.276319 13.611710 51.678740 0.000000 0.000000 0.000000 0.213409 -1.372962 2547 153 -9.6064E+00 9.392942 -0.242827 9.349512 13.430421 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606388 5 2.8821E+05 5.888917 6.186126 13.611686 13.716889 -7.053887 48.996427 0.000005 0.000001 0.436145 -0.857E+01 retry log_rel_run_E_err -7.9638251012174273 rel_E_err 8.1845449643211421D-12 k, q, energy_removed_layers before adjustment is 1262 0.99999426233512745 3.1865679174947404E+047 k, q, energy_removed_layers after adjustment is 1352 0.99998222520313940 4.1047588146543550E+047 Layers above q= 0.99998222520313940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.7519531250000 max vel inside fraction of cutoff 1779.2947150734076 max c/cs inside fraction of cutoff 0.64272911956286360 average v/vesc outside cutoff 1.0080692650985930 Kinetic plus potential energy outside cutoff 4.1047588146543550E+047 mass inside cutoff 1352 51.677821354623028 relax counter 0 log max v [km/s]= 4.3084059346241599 check gamma integral -1.5967627436656487E-002 retry: logT < hydro_mtx_min_allowed_logT 720 2893 retry: logT < hydro_mtx_min_allowed_logT 712 2897 retry: logT < hydro_mtx_min_allowed_logT 722 2900 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 9.392415 2.687E+05 -14.374343 13.598518 51.678740 0.000000 0.000000 0.000000 0.213409 -1.374906 2547 156 -9.7176E+00 9.392415 -0.242947 9.343560 13.426451 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606314 6 2.8821E+05 5.887177 6.185621 13.598494 13.695931 -7.053187 48.996427 0.000005 0.000001 0.436143 -0.860E+01 retry log_rel_run_E_err -7.9606093097047292 rel_E_err 8.2216068456275220D-12 save LOGS/profile15.data for model 2900 save photos/x900 for model 2900 k, q, energy_removed_layers before adjustment is 1264 0.99999412844570434 3.2328593304215778E+047 k, q, energy_removed_layers after adjustment is 1352 0.99998222520313940 4.1444936068718084E+047 Layers above q= 0.99998222520313940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.8398437500000 max vel inside fraction of cutoff 1785.0379395509312 max c/cs inside fraction of cutoff 0.64529660127921651 average v/vesc outside cutoff 1.0136847894583629 Kinetic plus potential energy outside cutoff 4.1444936068718084E+047 mass inside cutoff 1352 51.677821354623028 relax counter 0 log max v [km/s]= 4.3060437751728928 check gamma integral -1.5941333250582359E-002 retry: adjust_correction failed in eval_equations -- give up in solver 2902 retry: logT < hydro_mtx_min_allowed_logT 726 2907 2910 9.392005 2.686E+05 -14.340773 13.588247 51.678740 0.000000 0.000000 0.000000 0.213409 -1.376422 2547 158 -9.5279E+00 9.392005 -0.243041 9.338920 13.423354 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606256 12 2.8821E+05 5.885822 6.185229 13.588223 13.679592 -7.052641 48.996427 0.000005 0.000001 0.436142 -0.861E+01 max increase log_rel_run_E_err -7.9574201034137246 rel_E_err 8.1043665427131561D-12 k, q, energy_removed_layers before adjustment is 1266 0.99999399719387316 3.2714552807331190E+047 k, q, energy_removed_layers after adjustment is 1352 0.99998222520313940 4.1750961645765556E+047 Layers above q= 0.99998222520313940 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.9101562500000 max vel inside fraction of cutoff 1789.4967095308157 max c/cs inside fraction of cutoff 0.64729353110268251 average v/vesc outside cutoff 1.0180105976602967 Kinetic plus potential energy outside cutoff 4.1750961645765556E+047 mass inside cutoff 1352 51.677821354623028 relax counter 0 log max v [km/s]= 4.3094057197045039 check gamma integral -1.5920606752222125E-002 retry: logT < hydro_mtx_min_allowed_logT 714 2911 retry: logT < hydro_mtx_min_allowed_logT 698 2914 retry: logT < hydro_mtx_min_allowed_logT 694 2919 2920 9.391587 2.686E+05 -14.431751 13.577799 51.678740 0.000000 0.000000 0.000000 0.213409 -1.377966 2547 161 -9.6392E+00 9.391587 -0.243137 9.334196 13.420200 -99.000000 51.678740 0.000000 0.048235 0.786591 0.606197 6 2.8821E+05 5.884441 6.184830 13.577774 13.662954 -7.052087 48.996427 0.000005 0.000001 0.436141 -0.863E+01 max increase log_rel_run_E_err -7.9542734838152747 rel_E_err 8.1534881077051094D-12 k, q, energy_removed_layers before adjustment is 1268 0.99999386335935458 3.3106567567904718E+047 k, q, energy_removed_layers after adjustment is 1353 0.99998197828231117 4.2054484465749137E+047 Layers above q= 0.99998197828231117 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8360.9785156250000 max vel inside fraction of cutoff 1794.0200669339588 max c/cs inside fraction of cutoff 0.64932269415909560 average v/vesc outside cutoff 1.0188957911133083 Kinetic plus potential energy outside cutoff 4.2054484465749137E+047 mass inside cutoff 1353 51.677808594065759 relax counter 0 log max v [km/s]= 4.3077274947531015 check gamma integral -1.5899296947546722E-002 retry: logT < hydro_mtx_min_allowed_logT 768 2923 retry: logT < hydro_mtx_min_allowed_logT 685 2928 2930 9.391142 2.686E+05 -14.340540 13.566698 51.678740 0.000000 0.000000 0.000000 0.213409 -1.379609 2547 163 -9.6078E+00 9.391142 -0.243238 9.329171 13.416843 -99.000000 51.678740 0.000000 0.048234 0.786591 0.606135 6 2.8821E+05 5.882973 6.184403 13.566673 13.645256 -7.051500 48.996427 0.000005 0.000001 0.436140 -0.865E+01 max increase log_rel_run_E_err -7.9511760236794391 rel_E_err 8.3830772643674975D-12 k, q, energy_removed_layers before adjustment is 1269 0.99999378191604038 3.3409912711281227E+047 k, q, energy_removed_layers after adjustment is 1353 0.99998197828231117 4.2373172947294022E+047 Layers above q= 0.99998197828231117 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.0507812500000 max vel inside fraction of cutoff 1798.8130594961640 max c/cs inside fraction of cutoff 0.65147646624626843 average v/vesc outside cutoff 1.0234239138414722 Kinetic plus potential energy outside cutoff 4.2373172947294022E+047 mass inside cutoff 1353 51.677808594065759 relax counter 0 log max v [km/s]= 4.3074253819375112 check gamma integral -1.5876400137383170E-002 retry: logT < hydro_mtx_min_allowed_logT 802 2932 retry: abs(dlogT) > hydro_mtx_max_allowe 676 2937 2940 9.390610 2.685E+05 -14.388781 13.553421 51.678740 0.000000 0.000000 0.000000 0.213409 -1.381576 2547 165 -9.4180E+00 9.390610 -0.243360 9.323155 13.412822 -99.000000 51.678740 0.000000 0.048234 0.786591 0.606060 8 2.8821E+05 5.881215 6.183897 13.553395 13.624064 -7.050797 48.996427 0.000005 0.000001 0.436138 -0.867E+01 max increase log_rel_run_E_err -7.9480832489829680 rel_E_err 7.9832397314814800D-12 k, q, energy_removed_layers before adjustment is 1271 0.99999361622822502 3.3871943562291664E+047 k, q, energy_removed_layers after adjustment is 1353 0.99998197828231117 4.2749192963162904E+047 Layers above q= 0.99998197828231117 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.1386718750000 max vel inside fraction of cutoff 1804.5273477964463 max c/cs inside fraction of cutoff 0.65404918232312825 average v/vesc outside cutoff 1.0287770175333766 Kinetic plus potential energy outside cutoff 4.2749192963162904E+047 mass inside cutoff 1353 51.677808594065759 relax counter 0 log max v [km/s]= 4.3109931466362497 check gamma integral -1.5848675184303804E-002 retry: logT < hydro_mtx_min_allowed_logT 806 2941 retry: logT < hydro_mtx_min_allowed_logT 776 2944 retry: logT > hydro_mtx_max_allowed_logT 665 2949 2950 9.390068 2.685E+05 -14.380275 13.539911 51.678740 0.000000 0.000000 0.000000 0.213409 -1.383581 2547 168 -9.5293E+00 9.390068 -0.243483 9.317025 13.408722 -99.000000 51.678740 0.000000 0.048234 0.786591 0.605983 6 2.8821E+05 5.879423 6.183376 13.539885 13.602472 -7.050083 48.996427 0.000005 0.000001 0.436137 -0.869E+01 max increase log_rel_run_E_err -7.9450022960984192 rel_E_err 8.0007536124416869D-12 save photos/x950 for model 2950 k, q, energy_removed_layers before adjustment is 1273 0.99999341851179269 3.4452801158159084E+047 k, q, energy_removed_layers after adjustment is 1353 0.99998197828231117 4.3119703090262482E+047 Layers above q= 0.99998197828231117 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.2304687500000 max vel inside fraction of cutoff 1810.3217790605945 max c/cs inside fraction of cutoff 0.65666347093672772 average v/vesc outside cutoff 1.0341318134805890 Kinetic plus potential energy outside cutoff 4.3119703090262482E+047 mass inside cutoff 1353 51.677808594065759 relax counter 0 log max v [km/s]= 4.3089676514856281 check gamma integral -1.5820079114339122E-002 retry: logT < hydro_mtx_min_allowed_logT 836 2954 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 655 2958 2960 9.389286 2.684E+05 -14.449461 13.520471 51.678740 0.000000 0.000000 0.000000 0.213409 -1.386473 2547 170 -9.3396E+00 9.389286 -0.243661 9.308189 13.402809 -99.000000 51.678740 0.000000 0.048234 0.786591 0.605873 6 2.8821E+05 5.876841 6.182628 13.520444 13.571350 -7.049055 48.996427 0.000005 0.000001 0.436135 -0.873E+01 max increase log_rel_run_E_err -7.9419803911872995 rel_E_err 8.2123334413906278D-12 k, q, energy_removed_layers before adjustment is 1274 0.99999330341899129 3.4963157833574745E+047 k, q, energy_removed_layers after adjustment is 1354 0.99998172826732012 4.3646592519692385E+047 Layers above q= 0.99998172826732012 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.3593750000000 max vel inside fraction of cutoff 1818.6245400118330 max c/cs inside fraction of cutoff 0.66041924095390370 average v/vesc outside cutoff 1.0345635562378750 Kinetic plus potential energy outside cutoff 4.3646592519692385E+047 mass inside cutoff 1354 51.677795673606056 relax counter 0 log max v [km/s]= 4.3119101727203786 check gamma integral -1.5778242694456514E-002 retry: logT < hydro_mtx_min_allowed_logT 716 2961 retry: logT < hydro_mtx_min_allowed_logT 650 2965 retry: logT < hydro_mtx_min_allowed_logT 642 2968 2970 9.388634 2.684E+05 -14.505179 13.504268 51.678740 0.000000 0.000000 0.000000 0.213409 -1.388889 2547 173 -9.4508E+00 9.388634 -0.243809 9.300812 13.397868 -99.000000 51.678740 0.000000 0.048234 0.786591 0.605781 6 2.8821E+05 5.874685 6.182003 13.504241 13.545367 -7.048198 48.996427 0.000005 0.000001 0.436134 -0.875E+01 max increase log_rel_run_E_err -7.9390006151712447 rel_E_err 8.0023062266541697D-12 k, q, energy_removed_layers before adjustment is 1276 0.99999306810030530 3.5589913466400094E+047 k, q, energy_removed_layers after adjustment is 1356 0.99998139102154360 4.4073655933161733E+047 Layers above q= 0.99998139102154360 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.4687500000000 max vel inside fraction of cutoff 1825.5138203301667 max c/cs inside fraction of cutoff 0.66354426933606492 average v/vesc outside cutoff 1.0359568639314480 Kinetic plus potential energy outside cutoff 4.4073655933161733E+047 mass inside cutoff 1356 51.677778245169286 relax counter 0 log max v [km/s]= 4.3093471427280718 check gamma integral -1.5742755512828079E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 638 2972 retry: logT < hydro_mtx_min_allowed_logT 635 2975 retry: logT < hydro_mtx_min_allowed_logT 632 2979 2980 9.388050 2.683E+05 -14.485752 13.489788 51.678740 0.000000 0.000000 0.000000 0.213409 -1.391051 2547 176 -9.5621E+00 9.388050 -0.243942 9.294210 13.393444 -99.000000 51.678740 0.000000 0.048234 0.786591 0.605699 6 2.8821E+05 5.872756 6.181445 13.489760 13.522113 -7.047432 48.996427 0.000005 0.000001 0.436133 -0.878E+01 max increase log_rel_run_E_err -7.9360323831217237 rel_E_err 8.0237249856834715D-12 k, q, energy_removed_layers before adjustment is 1277 0.99999296930567272 3.5974403366625918E+047 k, q, energy_removed_layers after adjustment is 1359 0.99998081898632318 4.4454748657051309E+047 Layers above q= 0.99998081898632318 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.5644531250000 max vel inside fraction of cutoff 1831.6470587444257 max c/cs inside fraction of cutoff 0.66633300109250648 average v/vesc outside cutoff 1.0356692661866684 Kinetic plus potential energy outside cutoff 4.4454748657051309E+047 mass inside cutoff 1359 51.677748683109897 relax counter 0 log max v [km/s]= 4.3074220391706666 check gamma integral -1.5710558362582880E-002 retry: logT < hydro_mtx_min_allowed_logT 628 2983 2990 9.387156 2.683E+05 -14.506967 13.467673 51.678740 0.000000 0.000000 0.000000 0.213409 -1.394361 2551 177 -9.0713E+00 9.387156 -0.244145 9.284109 13.386669 -99.000000 51.678740 0.000000 0.048234 0.786591 0.605573 17 2.8821E+05 5.869804 6.180598 13.467644 13.486540 -7.046264 48.996427 0.000005 0.000001 0.436131 -0.881E+01 max increase log_rel_run_E_err -7.9331009432124082 rel_E_err 7.8040106638465624D-12 k, q, energy_removed_layers before adjustment is 1283 0.99999277957451715 3.6590948907064079E+047 k, q, energy_removed_layers after adjustment is 1364 0.99998058736772399 4.5040358491237004E+047 Layers above q= 0.99998058736772399 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.7128906250000 max vel inside fraction of cutoff 1840.9692899558663 max c/cs inside fraction of cutoff 0.67058408488070642 average v/vesc outside cutoff 1.0405059195642803 Kinetic plus potential energy outside cutoff 4.5040358491237004E+047 mass inside cutoff 1364 51.677736713352544 relax counter 0 log max v [km/s]= 4.3214227295693961 check gamma integral -1.5660505421929906E-002 retry: logT < hydro_mtx_min_allowed_logT 620 2991 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 642 2994 retry: logT < hydro_mtx_min_allowed_logT 616 2996 retry: logT < hydro_mtx_min_allowed_logT 606 3000 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 9.386217 2.682E+05 -14.599556 13.444460 51.678740 0.000000 0.000000 0.000000 0.213409 -1.397845 2551 181 -9.4836E+00 9.386217 -0.244357 9.273483 13.379535 -99.000000 51.678740 0.000000 0.048233 0.786591 0.605440 5 2.8821E+05 5.866699 6.179697 13.444431 13.449125 -7.045040 48.996427 0.000005 0.000001 0.436130 -0.885E+01 retry log_rel_run_E_err -7.9301811131497351 rel_E_err 7.9873746522246744D-12 save LOGS/profile16.data for model 3000 save photos/3000 for model 3000 k, q, energy_removed_layers before adjustment is 1286 0.99999250479181190 3.7315081319261954E+047 k, q, energy_removed_layers after adjustment is 1365 0.99998035334931157 4.5619838342518386E+047 Layers above q= 0.99998035334931157 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8361.8652343750000 max vel inside fraction of cutoff 1850.6987572914322 max c/cs inside fraction of cutoff 0.67503653321732937 average v/vesc outside cutoff 1.0454190800577086 Kinetic plus potential energy outside cutoff 4.5619838342518386E+047 mass inside cutoff 1365 51.677724619575862 relax counter 0 log max v [km/s]= 4.3088760128609183 check gamma integral -1.5606819415951228E-002 retry: logT < hydro_mtx_min_allowed_logT 603 3004 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 594 3009 3010 9.385264 2.681E+05 -14.578796 13.420953 51.678740 0.000000 0.000000 0.000000 0.213409 -1.401384 2551 183 -9.2939E+00 9.385263 -0.244573 9.262698 13.372288 -99.000000 51.678740 0.000000 0.048233 0.786591 0.605305 6 2.8821E+05 5.863548 6.178787 13.420923 13.411158 -7.043798 48.996427 0.000005 0.000001 0.436128 -0.889E+01 max increase log_rel_run_E_err -7.9272838001136936 rel_E_err 7.8099683392362343D-12 k, q, energy_removed_layers before adjustment is 1289 0.99999220825169111 3.8065191753592931E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998011694405631 4.6211617383475052E+047 Layers above q= 0.99998011694405631 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8362.0214843750000 max vel inside fraction of cutoff 1860.4945384242510 max c/cs inside fraction of cutoff 0.67953562406317114 average v/vesc outside cutoff 1.0534774637043456 Kinetic plus potential energy outside cutoff 4.6211617383475052E+047 mass inside cutoff 1366 51.677712402450162 relax counter 0 log max v [km/s]= 4.3121473449067498 check gamma integral -1.5551239180211290E-002 retry: logT < hydro_mtx_min_allowed_logT 594 3013 retry: adjust_correction failed in eval_equations -- give up in solver 3017 3020 9.384063 2.680E+05 -14.626318 13.391400 51.678740 0.000000 0.000000 0.000000 0.213409 -1.405846 2551 185 -9.1041E+00 9.384061 -0.244844 9.249105 13.363143 -99.000000 51.678740 0.000000 0.048233 0.786591 0.605135 6 2.8821E+05 5.859576 6.177646 13.391368 13.363322 -7.042233 48.996427 0.000005 0.000001 0.436126 -0.894E+01 max increase log_rel_run_E_err -7.9244105882170555 rel_E_err 7.8120092781809189D-12 k, q, energy_removed_layers before adjustment is 1291 0.99999198534496136 3.8844766576057629E+047 k, q, energy_removed_layers after adjustment is 1366 0.99998011694405631 4.6934516837748125E+047 Layers above q= 0.99998011694405631 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8362.2167968750000 max vel inside fraction of cutoff 1872.7270169154081 max c/cs inside fraction of cutoff 0.68517719686543033 average v/vesc outside cutoff 1.0633637904633215 Kinetic plus potential energy outside cutoff 4.6934516837748125E+047 mass inside cutoff 1366 51.677712402450162 relax counter 0 log max v [km/s]= 4.3174282146179666 check gamma integral -1.5479622932385834E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 580 3022 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 570 3026 retry: logT > hydro_mtx_max_allowed_logT 618 3030 3030 9.382539 2.679E+05 -14.667601 13.354010 51.678740 0.000000 0.000000 0.000000 0.213409 -1.411514 2551 188 -9.2154E+00 9.382536 -0.245188 9.231852 13.351521 -99.000000 51.678740 0.000000 0.048233 0.786591 0.604919 5 2.8821E+05 5.854535 6.176186 13.353977 13.302641 -7.040259 48.996427 0.000005 0.000001 0.436124 -0.901E+01 retry log_rel_run_E_err -7.9215477290245024 rel_E_err 8.0429456349105322D-12 k, q, energy_removed_layers before adjustment is 1294 0.99999161012538129 3.9875239160514322E+047 k, q, energy_removed_layers after adjustment is 1367 0.99997979468339571 4.7813076193844168E+047 Layers above q= 0.99997979468339571 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8362.4589843750000 max vel inside fraction of cutoff 1888.0718881923401 max c/cs inside fraction of cutoff 0.69229122972030332 average v/vesc outside cutoff 1.0709647790960157 Kinetic plus potential energy outside cutoff 4.7813076193844168E+047 mass inside cutoff 1367 51.677695748425286 relax counter 0 log max v [km/s]= 4.3134223921501897 check gamma integral -1.5386210955517596E-002 retry: logT < hydro_mtx_min_allowed_logT 596 3034 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 552 3038 3040 9.380869 2.678E+05 -14.479120 13.313165 51.678740 0.000000 0.000000 0.000000 0.213409 -1.417734 2551 190 -9.0257E+00 9.380865 -0.245564 9.212934 13.338757 -99.000000 51.678740 0.000000 0.048233 0.786591 0.604682 6 2.8821E+05 5.849009 6.174599 13.313130 13.236160 -7.038103 48.996427 0.000005 0.000001 0.436123 -0.907E+01 max increase log_rel_run_E_err -7.9187091373176273 rel_E_err 7.7569394587414120D-12 k, q, energy_removed_layers before adjustment is 1299 0.99999120100224947 4.1080050596951729E+047 k, q, energy_removed_layers after adjustment is 1368 0.99997946811475658 4.8747013394004578E+047 Layers above q= 0.99997946811475658 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8362.7265625000000 max vel inside fraction of cutoff 1904.6713170373127 max c/cs inside fraction of cutoff 0.70003357463535620 average v/vesc outside cutoff 1.0791609933387718 Kinetic plus potential energy outside cutoff 4.8747013394004578E+047 mass inside cutoff 1368 51.677678871769515 relax counter 0 log max v [km/s]= 4.3191314269708556 check gamma integral -1.5280542662922586E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 538 3042 retry: logT < hydro_mtx_min_allowed_logT 528 3046 3050 9.378870 2.676E+05 -14.653111 13.264471 51.678740 0.000000 0.000000 0.000000 0.213409 -1.425188 2551 192 -8.8359E+00 9.378864 -0.246013 9.190284 13.323447 -99.000000 51.678740 0.000000 0.048233 0.786591 0.604398 9 2.8821E+05 5.842394 6.172718 13.264434 13.156660 -7.035552 48.996427 0.000005 0.000001 0.436121 -0.916E+01 max increase log_rel_run_E_err -7.9159404562533693 rel_E_err 7.7086622346144051D-12 save photos/x050 for model 3050 k, q, energy_removed_layers before adjustment is 1303 0.99999083118082988 4.2330627520913404E+047 k, q, energy_removed_layers after adjustment is 1369 0.99997913727230170 4.9818643541870423E+047 Layers above q= 0.99997913727230170 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8363.0429687500000 max vel inside fraction of cutoff 1924.2378856744515 max c/cs inside fraction of cutoff 0.70922330943610279 average v/vesc outside cutoff 1.0891548649528602 Kinetic plus potential energy outside cutoff 4.9818643541870423E+047 mass inside cutoff 1369 51.677661774248335 relax counter 0 log max v [km/s]= 4.3271228262719621 check gamma integral -1.5149565810350861E-002 retry: logT < hydro_mtx_min_allowed_logT 516 3051 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 504 3055 retry: logT > hydro_mtx_max_allowed_logT 498 3060 3060 9.376333 2.674E+05 -14.394024 13.202957 51.678740 0.000000 0.000000 0.000000 0.213409 -1.434663 2551 195 -8.9472E+00 9.376325 -0.246582 9.161524 13.303964 -99.000000 51.678740 0.000000 0.048232 0.786591 0.604037 6 2.8821E+05 5.833997 6.170334 13.202917 13.055895 -7.032347 48.996427 0.000005 0.000001 0.436119 -0.926E+01 retry log_rel_run_E_err -7.9131489311169911 rel_E_err 7.8235069689097595D-12 k, q, energy_removed_layers before adjustment is 1308 0.99999029604448852 4.3844239435677368E+047 k, q, energy_removed_layers after adjustment is 1369 0.99997913727230170 5.1091470245616822E+047 Layers above q= 0.99997913727230170 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8363.4375000000000 max vel inside fraction of cutoff 1948.6109893130365 max c/cs inside fraction of cutoff 0.72076829229017114 average v/vesc outside cutoff 1.1067481056776596 Kinetic plus potential energy outside cutoff 5.1091470245616822E+047 mass inside cutoff 1369 51.677661774248335 relax counter 0 log max v [km/s]= 4.3199486676672922 check gamma integral -1.4976224229165846E-002 retry: logT > hydro_mtx_max_allowed_logT 470 3064 retry: logT < hydro_mtx_min_allowed_logT 434 3069 3070 9.372893 2.672E+05 -14.892432 13.120064 51.678740 0.000000 0.000000 0.000000 0.213409 -1.447532 2551 197 -8.7574E+00 9.372883 -0.247351 9.122507 13.277458 -99.000000 51.678740 0.000000 0.048232 0.786591 0.603546 6 2.8821E+05 5.822611 6.167121 13.120020 12.919603 -7.028041 48.996427 0.000005 0.000001 0.436117 -0.941E+01 max increase log_rel_run_E_err -7.9104182667916207 rel_E_err 7.5977872143484563D-12 k, q, energy_removed_layers before adjustment is 1313 0.99998960864064634 4.6002017384666717E+047 k, q, energy_removed_layers after adjustment is 1372 0.99997834849828759 5.2719293527196542E+047 Layers above q= 0.99997834849828759 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8363.9707031250000 max vel inside fraction of cutoff 1980.8515270505536 max c/cs inside fraction of cutoff 0.73621046874448226 average v/vesc outside cutoff 1.1136481059556140 Kinetic plus potential energy outside cutoff 5.2719293527196542E+047 mass inside cutoff 1372 51.677621011401193 relax counter 0 log max v [km/s]= 4.3273507493551833 check gamma integral -1.4728475141444632E-002 retry: logT < hydro_mtx_min_allowed_logT 407 3075 3080 9.366049 2.899E+05 -14.792875 12.956696 51.678740 0.000000 0.000000 0.000000 0.213409 -1.473231 2551 198 -8.2666E+00 9.366033 -0.248871 9.044735 13.224385 -99.000000 51.678740 0.000000 0.048232 0.786591 0.602564 8 2.8821E+05 5.799941 6.306047 12.956643 12.649851 -7.091524 48.996427 0.000005 0.000001 0.436114 -0.751E+01 max increase log_rel_run_E_err -7.9077790505239580 rel_E_err 7.4156705573858928D-12 k, q, energy_removed_layers before adjustment is 1322 0.99998842343997019 4.9359938894990318E+047 k, q, energy_removed_layers after adjustment is 1378 0.99997656551845870 5.5729355675642391E+047 Layers above q= 0.99997656551845870 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8365.0097656250000 max vel inside fraction of cutoff 2042.3255358100148 max c/cs inside fraction of cutoff 0.76622157418960768 average v/vesc outside cutoff 1.1325683133488282 Kinetic plus potential energy outside cutoff 5.5729355675642391E+047 mass inside cutoff 1378 51.677528869250310 relax counter 0 log max v [km/s]= 4.3675830790049543 check gamma integral -1.4191490376541552E-002 retry: logRho > hydro_mtx_max_allowed_logRho 4 3081 retry: logRho > hydro_mtx_max_allowed_logRho 1 3083 3090 9.356681 1.854E+06 -15.241915 12.736197 51.678740 0.000000 0.000000 0.000000 0.213409 -1.508570 2553 200 -8.1093E+00 9.356658 -0.226665 8.937952 13.151026 -99.000000 51.678740 0.000000 0.048232 0.786591 0.601216 7 2.8821E+05 5.768895 9.573471 12.736128 12.284755 -8.753334 48.996427 0.000004 0.000001 0.436113 0.421E+00 max increase log_rel_run_E_err -7.9051352277579712 rel_E_err 7.4312858807275363D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1334 0.99998702027876851 5.3319080012201361E+047 k, q, energy_removed_layers after adjustment is 1383 0.99997556085713057 5.9222216209152341E+047 Layers above q= 0.99997556085713057 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8366.3886718750000 max vel inside fraction of cutoff 2121.1799655797463 max c/cs inside fraction of cutoff 0.80584742533643494 average v/vesc outside cutoff 1.1635920241770559 Kinetic plus potential energy outside cutoff 5.9222216209152341E+047 mass inside cutoff 1383 51.677476949618807 relax counter 0 log max v [km/s]= 4.4592900999104925 check gamma integral -1.3360867612885472E-002 retry: logT < hydro_mtx_min_allowed_logT 7 3092 retry: logT > hydro_mtx_max_allowed_logT 314 3093 retry: logRho > hydro_mtx_max_allowed_logRho 2 3094 retry: logRho > hydro_mtx_max_allowed_logRho 2 3094 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 9.351327 1.631E+06 -15.308771 12.611626 51.678740 0.000000 0.000000 0.000000 0.213409 -1.528833 2574 204 -8.6745E+00 9.351300 -0.210748 8.876725 13.108725 -99.000000 51.678740 0.000000 0.048232 0.786591 0.600446 7 2.8821E+05 5.751150 9.382879 12.611546 12.078603 -3.688224 48.996427 0.000004 0.000001 0.436112 0.129E+03 max increase log_rel_run_E_err -7.9025875572656172 rel_E_err 7.4605722158937149D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile17.data for model 3100 save photos/x100 for model 3100 k, q, energy_removed_layers before adjustment is 1360 0.99998615159943927 5.5415356605787699E+047 k, q, energy_removed_layers after adjustment is 1406 0.99997496021589438 6.0918751495718709E+047 Layers above q= 0.99997496021589438 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8367.1582031250000 max vel inside fraction of cutoff 2163.7752152375911 max c/cs inside fraction of cutoff 0.82779710682832053 average v/vesc outside cutoff 1.1791780953820079 Kinetic plus potential energy outside cutoff 6.0918751495718709E+047 mass inside cutoff 1406 51.677445909236567 relax counter 0 log max v [km/s]= 4.3370912455312096 check gamma integral -1.2836276863964251E-002 retry: logT < hydro_mtx_min_allowed_logT 127 3105 retry: logT > hydro_mtx_max_allowed_logT 168 3110 3110 9.343175 1.566E+06 -15.175660 12.423690 51.678740 0.000000 0.000000 0.000000 0.213409 -1.559756 2584 206 -8.4847E+00 9.343142 -0.187993 8.783143 13.043761 -99.000000 51.678740 0.000000 0.048232 0.786591 0.599277 9 2.8821E+05 5.724137 9.357627 12.423590 11.768492 -2.854701 48.996427 0.000004 0.000000 0.436112 0.171E+03 retry log_rel_run_E_err -7.9000844968637844 rel_E_err 7.3299183230791535D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1377 0.99998500526559053 5.8174108645972132E+047 k, q, energy_removed_layers after adjustment is 1423 0.99997322496844421 6.3348464465202117E+047 Layers above q= 0.99997322496844421 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8368.3105468750000 max vel inside fraction of cutoff 2225.5681449837598 max c/cs inside fraction of cutoff 0.86033970961312467 average v/vesc outside cutoff 1.1867557437202474 Kinetic plus potential energy outside cutoff 6.3348464465202117E+047 mass inside cutoff 1423 51.677356233834871 relax counter 0 log max v [km/s]= 4.3426902885330065 check gamma integral -1.1967454133210077E-002 retry: get_T_tau -- L <= 0 3114 retry: logT > hydro_mtx_max_allowed_logT 256 3118 3120 9.332810 1.584E+06 -15.882811 12.187139 51.678740 0.000000 0.000000 0.000000 0.213409 -1.599191 2584 208 -8.2950E+00 9.332769 -0.161284 8.663360 12.960147 -99.000000 51.678740 0.000000 0.048232 0.786591 0.597795 8 2.8821E+05 5.689792 9.430749 12.187009 11.380295 -2.326269 48.996427 0.000004 0.000000 0.436111 0.177E+03 max increase log_rel_run_E_err -7.8976477728038903 rel_E_err 7.2537896532920699D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1383 0.99998361717372963 6.1372042761927794E+047 k, q, energy_removed_layers after adjustment is 1427 0.99997210471842235 6.6076118465161960E+047 Layers above q= 0.99997210471842235 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8369.7421875000000 max vel inside fraction of cutoff 2299.2480295027663 max c/cs inside fraction of cutoff 0.90029037995273598 average v/vesc outside cutoff 1.2115507632828197 Kinetic plus potential energy outside cutoff 6.6076118465161960E+047 mass inside cutoff 1427 51.677298340725329 relax counter 0 log max v [km/s]= 4.3470230873707552 check gamma integral -1.0740635405015348E-002 3130 9.316922 1.613E+06 -16.332117 11.828411 51.678740 0.000000 0.000000 0.000000 0.213409 -1.659810 2606 208 -8.1942E+00 9.316868 -0.124291 8.477718 12.829713 -99.000000 51.678740 0.000000 0.048232 0.786591 0.595541 7 2.8821E+05 5.637170 9.536678 11.828217 10.794336 -1.914906 48.996427 0.000004 0.000000 0.436111 0.180E+03 lgRho_cntr log_rel_run_E_err -7.8953001518736503 rel_E_err 6.9275123575676226D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1408 0.99998172826731935 6.5332085575834560E+047 k, q, energy_removed_layers after adjustment is 1449 0.99997022369909960 6.9602128177121607E+047 Layers above q= 0.99997022369909960 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8371.8730468750000 max vel inside fraction of cutoff 2403.2016306335399 max c/cs inside fraction of cutoff 0.95888396899388573 average v/vesc outside cutoff 1.2367469469534424 Kinetic plus potential energy outside cutoff 6.9602128177121607E+047 mass inside cutoff 1449 51.677201132016940 relax counter 0 log max v [km/s]= 4.3361907213343240 check gamma integral -8.5988431558450748E-003 3140 9.301717 1.584E+06 -16.940324 11.487976 51.678740 0.000000 0.000000 0.000000 0.213409 -1.717819 2612 208 -8.2045E+00 9.301651 -0.092417 8.297487 12.702195 -99.000000 51.678740 0.000000 0.048232 0.786591 0.593432 6 2.8821E+05 5.586896 9.569002 11.487696 10.235626 -1.797410 48.996427 0.000004 0.000000 0.436111 0.183E+03 lgRho_cntr log_rel_run_E_err -7.8930057859877367 rel_E_err 6.4803363536411571D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1412 0.99998011694405553 6.8645106504008271E+047 k, q, energy_removed_layers after adjustment is 1450 0.99996840408611709 7.2458188342550011E+047 Layers above q= 0.99996840408611709 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8373.8632812500000 max vel inside fraction of cutoff 2494.9115869791272 max c/cs inside fraction of cutoff 1.0127182381936959 average v/vesc outside cutoff 1.2546440356765227 Kinetic plus potential energy outside cutoff 7.2458188342550011E+047 mass inside cutoff 1450 51.677107096710834 relax counter 0 log max v [km/s]= 4.3258480683921947 check gamma integral -6.2630192135272609E-003 3150 9.286501 1.532E+06 -17.137934 11.148340 51.678740 0.000000 0.000000 0.000000 0.213409 -1.775700 2616 208 -8.2112E+00 9.286424 -0.063252 8.114235 12.571783 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591386 6 2.8821E+05 5.536713 9.569271 11.147939 9.670439 -1.745066 48.996427 0.000004 0.000000 0.436111 0.188E+03 lgRho_cntr log_rel_run_E_err -7.8908120966411115 rel_E_err 6.1919018946848050D-12 Using fixed_vsurf 20000.000000000000 save photos/x150 for model 3150 k, q, energy_removed_layers before adjustment is 1417 0.99997857613787922 7.1366050640895080E+047 k, q, energy_removed_layers after adjustment is 1454 0.99996716322476509 7.4923352104032836E+047 Layers above q= 0.99996716322476509 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8375.8164062500000 max vel inside fraction of cutoff 2580.8437510982562 max c/cs inside fraction of cutoff 1.0650133920069254 average v/vesc outside cutoff 1.2763911912144266 Kinetic plus potential energy outside cutoff 7.4923352104032836E+047 mass inside cutoff 1454 51.677042970559732 relax counter 0 log max v [km/s]= 4.3200790763037586 check gamma integral -3.6635226959292680E-003 3160 9.271257 1.471E+06 -17.681153 10.807498 51.678740 0.000000 0.000000 0.000000 0.213409 -1.833347 2615 208 -8.2153E+00 9.271167 -0.036240 7.927382 12.438153 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589420 6 2.8821E+05 5.486605 9.552156 10.806926 9.092224 -1.719541 48.996427 0.000004 0.000000 0.436111 0.194E+03 lgRho_cntr log_rel_run_E_err -7.8887111942734531 rel_E_err 6.4072549037401502D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1421 0.99997725743528032 7.3816265796873176E+047 k, q, energy_removed_layers after adjustment is 1457 0.99996588295654376 7.7086007454846805E+047 Layers above q= 0.99996588295654376 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8377.7460937500000 max vel inside fraction of cutoff 2662.5030800139807 max c/cs inside fraction of cutoff 1.1163627711958646 average v/vesc outside cutoff 1.2968786497060261 Kinetic plus potential energy outside cutoff 7.7086007454846805E+047 mass inside cutoff 1457 51.676976807911274 relax counter 0 log max v [km/s]= 4.3161304259646123 check gamma integral -8.2287044234754516E-004 3170 9.255967 1.422E+06 -17.840538 10.463691 51.678740 0.000000 0.000000 0.000000 0.213409 -1.890637 2613 208 -8.2169E+00 9.255866 -0.010966 7.736326 12.300980 -99.000000 51.678740 0.000000 0.048232 0.786591 0.587553 6 2.8821E+05 5.436566 9.544874 10.462877 8.496111 -1.717605 48.996427 0.000004 0.000000 0.436111 0.199E+03 lgRho_cntr log_rel_run_E_err -7.8866603026525191 rel_E_err 5.8867956952700684D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1421 0.99997585627598062 7.6008748869510898E+047 k, q, energy_removed_layers after adjustment is 1458 0.99996461423608574 7.9026837516570518E+047 Layers above q= 0.99996461423608574 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8379.6601562500000 max vel inside fraction of cutoff 2740.9171497716693 max c/cs inside fraction of cutoff 1.1672174155585069 average v/vesc outside cutoff 1.3127740049112906 Kinetic plus potential energy outside cutoff 7.9026837516570518E+047 mass inside cutoff 1458 51.676911242036674 relax counter 0 log max v [km/s]= 4.3135958969791171 check gamma integral 2.2276317850839665E-003 3180 9.239047 1.370E+06 -18.248464 10.079627 51.678740 0.000000 0.000000 0.000000 0.213409 -1.953232 2608 208 -8.2137E+00 9.238932 0.015263 7.520038 12.145285 -99.000000 51.678740 0.000000 0.048232 0.786591 0.585627 6 2.8821E+05 5.381487 9.531593 10.078429 7.813057 -1.716541 48.996427 0.000004 0.000000 0.436111 0.204E+03 lgRho_cntr log_rel_run_E_err -7.8846741847635693 rel_E_err 5.9429856238451571D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1419 0.99997465528229501 7.8001953159470200E+047 k, q, energy_removed_layers after adjustment is 1456 0.99996302769175582 8.0953249609261245E+047 Layers above q= 0.99996302769175582 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8381.7714843750000 max vel inside fraction of cutoff 2824.4523748006059 max c/cs inside fraction of cutoff 1.2231405850157611 average v/vesc outside cutoff 1.3245207975505293 Kinetic plus potential energy outside cutoff 8.0953249609261245E+047 mass inside cutoff 1456 51.676829251424863 relax counter 0 log max v [km/s]= 4.3114481418877624 check gamma integral 5.7843438132920465E-003 3190 9.222026 1.318E+06 -18.742155 9.689000 51.678740 0.000000 0.000000 0.000000 0.213409 -2.015098 2601 208 -8.2101E+00 9.221898 0.040137 7.296692 11.984309 -99.000000 51.678740 0.000000 0.048232 0.786591 0.583869 6 2.8821E+05 5.326468 9.514658 9.687236 7.094419 -1.726369 48.996427 0.000004 0.000000 0.436111 0.209E+03 lgRho_cntr log_rel_run_E_err -7.8827973436582202 rel_E_err 5.5535511395298234D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1415 0.99997322496844410 7.9999790014474963E+047 k, q, energy_removed_layers after adjustment is 1449 0.99996188849184087 8.2697623603293441E+047 Layers above q= 0.99996188849184087 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8383.8945312500000 max vel inside fraction of cutoff 2905.6839097698148 max c/cs inside fraction of cutoff 1.2793467633632363 average v/vesc outside cutoff 1.3406710697694608 Kinetic plus potential energy outside cutoff 8.2697623603293441E+047 mass inside cutoff 1449 51.676770379008723 relax counter 0 log max v [km/s]= 4.3098157061232927 check gamma integral 9.4832424253975412E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 9.204889 1.271E+06 -18.988615 9.291519 51.678740 0.000000 0.000000 0.000000 0.213409 -2.076063 2610 208 -8.2049E+00 9.204748 0.063938 7.065085 11.817523 -99.000000 51.678740 0.000000 0.048232 0.786591 0.582303 6 2.8821E+05 5.271520 9.498985 9.288933 6.319321 -1.744423 48.996427 0.000004 0.000000 0.436111 0.214E+03 lgRho_cntr log_rel_run_E_err -7.8809902986330957 rel_E_err 5.3192432027555253D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile18.data for model 3200 save photos/x200 for model 3200 k, q, energy_removed_layers before adjustment is 1425 0.99997210471842191 8.1734740722658217E+047 k, q, energy_removed_layers after adjustment is 1458 0.99996063359555343 8.4300431973328199E+047 Layers above q= 0.99996063359555343 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8386.0390625000000 max vel inside fraction of cutoff 2985.0879671632288 max c/cs inside fraction of cutoff 1.3361854076906670 average v/vesc outside cutoff 1.3571544273785348 Kinetic plus potential energy outside cutoff 8.4300431973328199E+047 mass inside cutoff 1458 51.676705527549842 relax counter 0 log max v [km/s]= 4.3085976053081154 check gamma integral 1.3248504468017135E-002 3210 9.187316 1.228E+06 -19.149580 8.880777 51.678740 0.000000 0.000000 0.000000 0.213409 -2.137015 2610 208 -8.1176E+00 9.187164 0.087299 6.819473 11.641264 -99.000000 51.678740 0.000000 0.048232 0.786591 0.580930 6 2.8821E+05 5.215692 9.485874 8.876989 5.370025 -1.765299 48.996427 0.000004 0.000000 0.436111 0.219E+03 max increase log_rel_run_E_err -7.8792286172187493 rel_E_err 5.1929955350105051D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1429 0.99997077391931632 8.3399455838324108E+047 k, q, energy_removed_layers after adjustment is 1459 0.99995962877367039 8.5815245506971766E+047 Layers above q= 0.99995962877367039 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8388.2656250000000 max vel inside fraction of cutoff 3064.3750861751228 max c/cs inside fraction of cutoff 1.3950115184210148 average v/vesc outside cutoff 1.3735404360638537 Kinetic plus potential energy outside cutoff 8.5815245506971766E+047 mass inside cutoff 1459 51.676653599621069 relax counter 0 log max v [km/s]= 4.3089608616181003 check gamma integral 1.7062696626899562E-002 3220 9.168906 1.185E+06 -19.286186 8.417182 51.678740 0.000000 0.000000 0.000000 0.213409 -2.199032 2618 208 -8.1058E+00 9.168742 0.110876 6.551872 11.450532 -99.000000 51.678740 0.000000 0.048232 0.786591 0.579762 6 2.8821E+05 5.157805 9.471982 8.411219 4.719736 -1.788725 48.996427 0.000004 0.000000 0.436111 0.224E+03 lgRho_cntr log_rel_run_E_err -7.8775331421675192 rel_E_err 5.1212883378122067D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1437 0.99996953525097432 8.5052383366551117E+047 k, q, energy_removed_layers after adjustment is 1468 0.99995761052257304 8.7281469045354421E+047 Layers above q= 0.99995761052257304 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8390.6386718750000 max vel inside fraction of cutoff 3145.4248621581228 max c/cs inside fraction of cutoff 1.4575404704922239 average v/vesc outside cutoff 1.3749695888298159 Kinetic plus potential energy outside cutoff 8.7281469045354421E+047 mass inside cutoff 1468 51.676549298947485 relax counter 0 log max v [km/s]= 4.3080027285120046 check gamma integral 2.0911803924277543E-002 3230 9.151113 1.142E+06 -19.426236 7.988022 51.678740 0.000000 0.000000 0.000000 0.213409 -2.257085 2618 208 -8.1500E+00 9.150939 0.132991 6.281680 11.259903 -99.000000 51.678740 0.000000 0.048232 0.786591 0.578909 6 2.8821E+05 5.102476 9.451832 7.979397 3.854621 -1.817719 48.996427 0.000004 0.000000 0.436111 0.229E+03 lgRho_cntr log_rel_run_E_err -7.8758966872306608 rel_E_err 5.1929752315679284D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1437 0.99996840408611676 8.6450351595906352E+047 k, q, energy_removed_layers after adjustment is 1468 0.99995652376813082 8.8622702486340016E+047 Layers above q= 0.99995652376813082 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8392.9824218750000 max vel inside fraction of cutoff 3222.0413400037883 max c/cs inside fraction of cutoff 1.5191301514315230 average v/vesc outside cutoff 1.3890060980517558 Kinetic plus potential energy outside cutoff 8.8622702486340016E+047 mass inside cutoff 1468 51.676493136847299 relax counter 0 log max v [km/s]= 4.3065252880353446 check gamma integral 2.4405986547548546E-002 3240 9.133325 1.101E+06 -19.577797 7.562990 51.678740 0.000000 0.000000 0.000000 0.213409 -2.313266 2612 208 -8.1469E+00 9.133142 0.154614 5.998320 11.062747 -99.000000 51.678740 0.000000 0.048232 0.786591 0.578328 5 2.8821E+05 5.047776 9.431376 7.550992 2.954828 -1.847612 48.996427 0.000004 0.000000 0.436111 0.234E+03 lgRho_cntr log_rel_run_E_err -7.8743365113201929 rel_E_err 4.7840349139619450D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1435 0.99996716322476509 8.7840988836290085E+047 k, q, energy_removed_layers after adjustment is 1465 0.99995541310681635 8.9888114802976255E+047 Layers above q= 0.99995541310681635 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8395.3906250000000 max vel inside fraction of cutoff 3297.1096742756718 max c/cs inside fraction of cutoff 1.5821502976789306 average v/vesc outside cutoff 1.4022281464086692 Kinetic plus potential energy outside cutoff 8.9888114802976255E+047 mass inside cutoff 1465 51.676435739270076 relax counter 0 log max v [km/s]= 4.3059249263608805 check gamma integral 2.7613639019693562E-002 3250 9.114366 1.066E+06 -19.723216 7.121194 51.678740 0.000000 0.000000 0.000000 0.213409 -2.371176 2618 208 -7.9723E+00 9.114175 0.177297 5.679353 10.844956 -99.000000 51.678740 0.000000 0.048232 0.786591 0.578000 6 2.8821E+05 4.990137 9.420074 7.105202 1.955825 -1.878434 48.996427 0.000004 0.000000 0.436111 0.239E+03 lgRho_cntr log_rel_run_E_err -7.8728441987250397 rel_E_err 4.3754363812082927D-12 Using fixed_vsurf 20000.000000000000 save photos/x250 for model 3250 k, q, energy_removed_layers before adjustment is 1445 0.99996588295654365 8.9263140414768128E+047 k, q, energy_removed_layers after adjustment is 1475 0.99995396400097158 9.1165944646084403E+047 Layers above q= 0.99995396400097158 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8398.0566406250000 max vel inside fraction of cutoff 3375.5181910138394 max c/cs inside fraction of cutoff 1.6512754241824019 average v/vesc outside cutoff 1.4124358159763291 Kinetic plus potential energy outside cutoff 9.1165944646084403E+047 mass inside cutoff 1475 51.676360851305979 relax counter 0 log max v [km/s]= 4.3073546431961400 check gamma integral 3.0672606029411405E-002 3260 9.095709 1.024E+06 -19.876762 6.703294 51.678740 0.000000 0.000000 0.000000 0.213409 -2.426299 2612 208 -8.0879E+00 9.095513 0.199398 5.345971 10.622540 -99.000000 51.678740 0.000000 0.048232 0.786591 0.577961 5 2.8821E+05 4.934061 9.394758 6.683788 0.930831 -1.913575 48.996427 0.000004 0.000000 0.436111 0.245E+03 lgRho_cntr log_rel_run_E_err -7.8714139083119097 rel_E_err 4.2599054978636635D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1441 0.99996461423608574 9.0574203766817470E+047 k, q, energy_removed_layers after adjustment is 1471 0.99995290369504541 9.2365323757586333E+047 Layers above q= 0.99995290369504541 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8400.7890625000000 max vel inside fraction of cutoff 3451.0479187578107 max c/cs inside fraction of cutoff 1.7215855718781998 average v/vesc outside cutoff 1.4270639381808274 Kinetic plus potential energy outside cutoff 9.2365323757586333E+047 mass inside cutoff 1471 51.676306056031777 relax counter 0 log max v [km/s]= 4.3055064385929498 check gamma integral 3.3301060648760587E-002 3270 9.077043 9.870E+05 -20.033812 6.302337 51.678740 0.000000 0.000000 0.000000 0.213409 -2.479801 2606 208 -8.0008E+00 9.076840 0.221420 4.990323 10.391618 -99.000000 51.678740 0.000000 0.048232 0.786591 0.578181 6 2.8821E+05 4.878541 9.374822 6.280631 -0.138097 -1.950000 48.996427 0.000004 0.000000 0.436111 0.251E+03 max increase log_rel_run_E_err -7.8700500242954661 rel_E_err 4.1027515499419303D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1437 0.99996341597546634 9.1792577063183550E+047 k, q, energy_removed_layers after adjustment is 1467 0.99995182011150163 9.3521552551143059E+047 Layers above q= 0.99995182011150163 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8403.6523437500000 max vel inside fraction of cutoff 3524.8244482514065 max c/cs inside fraction of cutoff 1.7945121675537217 average v/vesc outside cutoff 1.4426587295950741 Kinetic plus potential energy outside cutoff 9.3521552551143059E+047 mass inside cutoff 1467 51.676250057799621 relax counter 0 log max v [km/s]= 4.3058151955645236 check gamma integral 3.5558166123227666E-002 3280 9.057401 9.501E+05 -20.205069 5.893400 51.678740 0.000000 0.000000 0.000000 0.213409 -2.534578 2603 208 -8.0156E+00 9.057193 0.244601 4.589221 10.139298 -99.000000 51.678740 0.000000 0.048232 0.786591 0.578664 6 2.8821E+05 4.820687 9.354963 5.871289 -1.311566 -1.990261 48.996427 0.000004 0.000000 0.436111 0.257E+03 lgRho_cntr log_rel_run_E_err -7.8687603301307991 rel_E_err 4.0898372908460618D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1436 0.99996188849184064 9.3111655350774024E+047 k, q, energy_removed_layers after adjustment is 1466 0.99995007527376167 9.4696746000600791E+047 Layers above q= 0.99995007527376167 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8406.8261718750000 max vel inside fraction of cutoff 3600.1005235546677 max c/cs inside fraction of cutoff 1.8742751172203163 average v/vesc outside cutoff 1.4509715661225404 Kinetic plus potential energy outside cutoff 9.4696746000600791E+047 mass inside cutoff 1466 51.676159886783829 relax counter 0 log max v [km/s]= 4.3052330850727323 check gamma integral 3.7559832993015296E-002 3290 9.038691 9.096E+05 -20.374701 5.509008 51.678740 0.000000 0.000000 0.000000 0.213409 -2.585533 2601 208 -8.0219E+00 9.038478 0.266755 4.179127 9.889881 -99.000000 51.678740 0.000000 0.048232 0.786591 0.579340 6 2.8821E+05 4.766064 9.323609 5.488198 -2.477413 -2.029921 48.996427 0.000004 0.000000 0.436111 0.264E+03 lgRho_cntr log_rel_run_E_err -7.8675029710382516 rel_E_err 3.7298319342339638D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1435 0.99996063359555321 9.4298670255613922E+047 k, q, energy_removed_layers after adjustment is 1465 0.99994881105249422 9.5792632892216345E+047 Layers above q= 0.99994881105249422 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8410.0234375000000 max vel inside fraction of cutoff 3669.0191646016260 max c/cs inside fraction of cutoff 1.9531847745442801 average v/vesc outside cutoff 1.4639048305283335 Kinetic plus potential energy outside cutoff 9.5792632892216345E+047 mass inside cutoff 1465 51.676094553421734 relax counter 0 log max v [km/s]= 4.3048455199667162 check gamma integral 3.9152659731927754E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 9.018558 8.746E+05 -20.564672 5.095305 51.678740 0.000000 0.000000 0.000000 0.213409 -2.639340 2602 208 -7.9194E+00 9.018343 0.290732 3.704314 9.611433 -99.000000 51.678740 0.000000 0.048232 0.786591 0.580263 5 2.8821E+05 4.707730 9.303354 5.077285 -3.786243 -2.075393 48.996427 0.000004 0.000000 0.436111 0.270E+03 lgRho_cntr log_rel_run_E_err -7.8663297371666205 rel_E_err 3.6394471161109675D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile19.data for model 3300 save photos/x300 for model 3300 k, q, energy_removed_layers before adjustment is 1439 0.99995911811567972 9.5506819558647711E+047 k, q, energy_removed_layers after adjustment is 1470 0.99994714665617923 9.6942386758977285E+047 Layers above q= 0.99994714665617923 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8413.6738281250000 max vel inside fraction of cutoff 3739.3237406716244 max c/cs inside fraction of cutoff 2.0413117637412905 average v/vesc outside cutoff 1.4746148378149493 Kinetic plus potential energy outside cutoff 9.6942386758977285E+047 mass inside cutoff 1470 51.676008539517426 relax counter 0 log max v [km/s]= 4.3049198338974692 check gamma integral 4.0580501757485822E-002 3310 8.999452 8.361E+05 -20.751926 4.705187 51.678740 0.000000 0.000000 0.000000 0.213409 -2.689643 2606 208 -7.9589E+00 8.999234 0.313638 3.219573 9.337354 -99.000000 51.678740 0.000000 0.048232 0.786591 0.581303 5 2.8821E+05 4.652739 9.271083 4.690754 -5.082337 -2.124449 48.996427 0.000004 0.000000 0.436111 0.277E+03 lgRho_cntr log_rel_run_E_err -7.8652013252402364 rel_E_err 3.5757357643102519D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1444 0.99995799186716416 9.6567276324386274E+047 k, q, energy_removed_layers after adjustment is 1476 0.99994546171151177 9.8008912623586111E+047 Layers above q= 0.99994546171151177 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8417.3535156250000 max vel inside fraction of cutoff 3801.5708547450936 max c/cs inside fraction of cutoff 2.1278235371211740 average v/vesc outside cutoff 1.4845300937135411 Kinetic plus potential energy outside cutoff 9.8008912623586111E+047 mass inside cutoff 1476 51.675921463700149 relax counter 0 log max v [km/s]= 4.3045684228208563 check gamma integral 4.1715227256644116E-002 3320 8.979400 7.997E+05 -20.955679 4.316833 51.678740 0.000000 0.000000 0.000000 0.213409 -2.741897 2603 208 -7.7822E+00 8.979181 0.337862 2.672505 9.039296 -99.000000 51.678740 0.000000 0.048232 0.786591 0.582533 5 2.8821E+05 4.595332 9.242108 4.306869 -6.501482 -2.174569 48.996427 0.000004 0.000000 0.436111 0.284E+03 lgRho_cntr log_rel_run_E_err -7.8641445082702246 rel_E_err 3.0157675589484637D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1444 0.99995615527309978 9.7808995566851116E+047 k, q, energy_removed_layers after adjustment is 1474 0.99994403852953462 9.9103665210708614E+047 Layers above q= 0.99994403852953462 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8421.4628906250000 max vel inside fraction of cutoff 3861.4370763778256 max c/cs inside fraction of cutoff 2.2215556630188948 average v/vesc outside cutoff 1.5000950178960566 Kinetic plus potential energy outside cutoff 9.9103665210708614E+047 mass inside cutoff 1474 51.675847915448877 relax counter 0 log max v [km/s]= 4.3050114252559410 check gamma integral 4.2729103933910696E-002 3330 8.959808 7.615E+05 -21.161626 3.989584 51.678740 0.000000 0.000000 0.000000 0.213409 -2.792592 2600 208 -7.8904E+00 8.959588 0.361721 2.098160 8.737835 -99.000000 51.678740 0.000000 0.048232 0.786591 0.583851 5 2.8821E+05 4.539497 9.204750 3.983972 -7.948715 -2.231905 48.996427 0.000004 0.000000 0.436111 0.292E+03 lgRho_cntr log_rel_run_E_err -7.8631206520636887 rel_E_err 3.1275558533343227D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1445 0.99995465998630251 9.8906661375419710E+047 k, q, energy_removed_layers after adjustment is 1474 0.99994252015319740 1.0015653104866401E+048 Layers above q= 0.99994252015319740 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8425.7382812500000 max vel inside fraction of cutoff 3913.9688730299385 max c/cs inside fraction of cutoff 2.3158635735371780 average v/vesc outside cutoff 1.5135371651288196 Kinetic plus potential energy outside cutoff 1.0015653104866401E+048 mass inside cutoff 1474 51.675769447673019 relax counter 0 log max v [km/s]= 4.3042623963350186 check gamma integral 4.3589491319407328E-002 3340 8.940312 7.253E+05 -21.373032 3.746824 51.678740 0.000000 0.000000 0.000000 0.213409 -2.842841 2599 208 -7.7994E+00 8.940091 0.385667 1.485283 8.427840 -99.000000 51.678740 0.000000 0.048232 0.786591 0.585256 5 2.8821E+05 4.484139 9.168023 3.744440 -9.450979 -2.290498 48.996427 0.000004 0.000000 0.436111 0.300E+03 max increase log_rel_run_E_err -7.8621606058555447 rel_E_err 2.8052682872848842D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1448 0.99995325888483422 9.9954413108245326E+047 k, q, energy_removed_layers after adjustment is 1477 0.99994035866088149 1.0119615691770956E+048 Layers above q= 0.99994035866088149 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8430.2734375000000 max vel inside fraction of cutoff 3959.9740798495354 max c/cs inside fraction of cutoff 2.4123269039525477 average v/vesc outside cutoff 1.5222740090387381 Kinetic plus potential energy outside cutoff 1.0119615691770956E+048 mass inside cutoff 1477 51.675657744473760 relax counter 0 log max v [km/s]= 4.3043787058763101 check gamma integral 4.4353752208562726E-002 3350 8.919924 6.870E+05 -21.600847 3.582554 51.678740 0.000000 0.000000 0.000000 0.213409 -2.895311 2593 208 -7.8111E+00 8.919703 0.410956 0.797569 8.093260 -99.000000 51.678740 0.000000 0.048232 0.786591 0.586805 5 2.8821E+05 4.426419 9.124324 3.581841 -11.091277 -2.354112 48.996427 0.000004 0.000000 0.436111 0.309E+03 lgRho_cntr log_rel_run_E_err -7.8612577953872176 rel_E_err 2.7923528808001432D-12 Using fixed_vsurf 20000.000000000000 save photos/x350 for model 3350 k, q, energy_removed_layers before adjustment is 1442 0.99995138913499415 1.0111368903045046E+048 k, q, energy_removed_layers after adjustment is 1470 0.99993797866991196 1.0228484335365583E+048 Layers above q= 0.99993797866991196 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8435.3417968750000 max vel inside fraction of cutoff 4001.1047346261034 max c/cs inside fraction of cutoff 2.5160263860276069 average v/vesc outside cutoff 1.5282621407512240 Kinetic plus potential energy outside cutoff 1.0228484335365583E+048 mass inside cutoff 1470 51.675534749539402 relax counter 0 log max v [km/s]= 4.3038477448866637 check gamma integral 4.5084369795292276E-002 3360 8.900613 6.526E+05 -21.822682 3.482794 51.678740 0.000000 0.000000 0.000000 0.213409 -2.944995 2586 208 -7.8147E+00 8.900393 0.435165 0.099770 7.767291 -99.000000 51.678740 0.000000 0.048232 0.786591 0.588340 5 2.8821E+05 4.371893 9.083631 3.482614 -12.713204 -2.422841 48.996427 0.000004 0.000000 0.436111 0.318E+03 lgRho_cntr log_rel_run_E_err -7.8603977804856902 rel_E_err 2.6336673781054191D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1436 0.99994965486810128 1.0216079010567185E+048 k, q, energy_removed_layers after adjustment is 1465 0.99993531027589388 1.0332471237068188E+048 Layers above q= 0.99993531027589388 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8440.4824218750000 max vel inside fraction of cutoff 4033.3498648757486 max c/cs inside fraction of cutoff 2.6168375050011510 average v/vesc outside cutoff 1.5325402199694818 Kinetic plus potential energy outside cutoff 1.0332471237068188E+048 mass inside cutoff 1465 51.675396850298895 relax counter 0 log max v [km/s]= 4.3035927800809111 check gamma integral 4.5731939075374706E-002 3370 8.879960 6.175E+05 -22.066457 3.404876 51.678740 0.000000 0.000000 0.000000 0.213409 -2.998208 2577 208 -7.7096E+00 8.879743 0.461388 -0.700680 7.410631 -99.000000 51.678740 0.000000 0.048232 0.786591 0.590040 5 2.8821E+05 4.313701 9.039910 3.404842 -14.524694 -2.496521 48.996427 0.000004 0.000000 0.436111 0.328E+03 lgRho_cntr log_rel_run_E_err -7.8595793535504068 rel_E_err 2.5354690786593010D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1427 0.99994756003506824 1.0330625154326599E+048 k, q, energy_removed_layers after adjustment is 1456 0.99993284871526822 1.0445908113183256E+048 Layers above q= 0.99993284871526822 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8446.3808593750000 max vel inside fraction of cutoff 4060.5093980556280 max c/cs inside fraction of cutoff 2.7276688230588482 average v/vesc outside cutoff 1.5407800921732586 Kinetic plus potential energy outside cutoff 1.0445908113183256E+048 mass inside cutoff 1456 51.675269639947487 relax counter 0 log max v [km/s]= 4.3036341631699955 check gamma integral 4.6392609716628487E-002 3380 8.860453 5.849E+05 -22.303118 3.342334 51.678740 0.000000 0.000000 0.000000 0.213409 -3.048556 2578 208 -7.7454E+00 8.860236 0.486510 -1.510979 7.069295 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591700 5 2.8821E+05 4.258842 8.995904 3.342328 -16.312987 -2.574696 48.996427 0.000004 0.000000 0.436111 0.338E+03 lgRho_cntr log_rel_run_E_err -7.8588049092710870 rel_E_err 2.3727118726451834D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1624 0.99958723442695807 1.6238453078149335E+048 k, q, energy_removed_layers after adjustment is 1785 0.99704488043457296 4.6526482385663415E+048 Layers above q= 0.99704488043457296 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8452.3730468750000 max vel inside fraction of cutoff 3944.9054953175701 max c/cs inside fraction of cutoff 2.6790932971722103 average v/vesc outside cutoff 0.96132557613615854 Kinetic plus potential energy outside cutoff 4.6526482385663415E+048 mass inside cutoff 1785 51.526023078232591 relax counter 0 log max v [km/s]= 4.3032806291286514 check gamma integral 4.6996407202171214E-002 3390 8.840081 5.546E+05 -22.556541 3.281765 51.678740 0.000000 0.000000 0.000000 0.213409 -3.101266 2576 208 -7.5653E+00 8.839867 0.513151 -2.417250 6.714636 -99.000000 51.678740 0.000000 0.048232 0.786591 0.593480 5 2.8821E+05 4.201646 8.956797 3.281764 -18.262450 -2.658605 48.996427 0.000004 0.000000 0.436111 0.348E+03 lgRho_cntr log_rel_run_E_err -7.8580689402254862 rel_E_err 2.2683975763083353D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1700 0.99890780058474671 4.4214813013335547E+048 k, q, energy_removed_layers after adjustment is 1809 0.99582298356594190 8.1277158500843396E+048 Layers above q= 0.99582298356594190 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8459.1171875000000 max vel inside fraction of cutoff 3900.5507115828700 max c/cs inside fraction of cutoff 2.7257450351609611 average v/vesc outside cutoff 0.97144483381225688 Kinetic plus potential energy outside cutoff 8.1277158500843396E+048 mass inside cutoff 1809 51.462876987732770 relax counter 0 log max v [km/s]= 4.3036759820940107 check gamma integral 4.7612531487418411E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 8.820251 5.249E+05 -22.810013 3.228217 51.678740 0.000000 0.000000 0.000000 0.213409 -3.152696 2560 208 -7.6664E+00 8.820039 0.539578 -3.364057 6.379872 -99.000000 51.678740 0.000000 0.048232 0.786591 0.595259 5 2.8821E+05 4.146064 8.914082 3.228217 -20.246574 -2.747878 48.996427 0.000004 0.000000 0.436111 0.360E+03 lgRho_cntr log_rel_run_E_err -7.8573722245493789 rel_E_err 2.1452253514093303D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile20.data for model 3400 save photos/x400 for model 3400 k, q, energy_removed_layers before adjustment is 1722 0.99820193305705651 7.8968339372920541E+048 k, q, energy_removed_layers after adjustment is 1814 0.99459233440466965 1.2233985807858153E+049 Layers above q= 0.99459233440466965 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8466.2285156250000 max vel inside fraction of cutoff 3848.5624815294627 max c/cs inside fraction of cutoff 2.7689782392337463 average v/vesc outside cutoff 0.99034138871689470 Kinetic plus potential energy outside cutoff 1.2233985807858153E+049 mass inside cutoff 1814 51.399278589777715 relax counter 0 log max v [km/s]= 4.3030905288064103 check gamma integral 4.8203548903471304E-002 3410 8.800566 4.971E+05 -23.067963 3.175445 51.678740 0.000000 0.000000 0.000000 0.213409 -3.203875 2559 208 -7.5694E+00 8.800358 0.566322 -4.370533 6.070070 -99.000000 51.678740 0.000000 0.048232 0.786591 0.597068 5 2.8821E+05 4.090973 8.873134 3.175445 -22.302703 -2.837409 48.996427 0.000004 0.000000 0.436111 0.372E+03 max increase log_rel_run_E_err -7.8567064154097954 rel_E_err 2.0968056437625110D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1750 0.99741489745803691 1.2063455810755353E+049 k, q, energy_removed_layers after adjustment is 1832 0.99338396496735115 1.6854809177793286E+049 Layers above q= 0.99338396496735115 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8473.8808593750000 max vel inside fraction of cutoff 3785.4312117693462 max c/cs inside fraction of cutoff 2.8075658670910997 average v/vesc outside cutoff 1.0082004694897624 Kinetic plus potential energy outside cutoff 1.6854809177793286E+049 mass inside cutoff 1832 51.336831579882677 relax counter 0 log max v [km/s]= 4.3031925115717335 check gamma integral 4.8783625105818643E-002 3420 8.780048 4.700E+05 -23.344228 3.120548 51.678740 0.000000 0.000000 0.000000 0.213409 -3.257359 2558 208 -7.5726E+00 8.779845 0.594836 -5.497642 5.782544 -99.000000 51.678740 0.000000 0.048232 0.786591 0.598995 5 2.8821E+05 4.033633 8.832842 3.120548 -24.542563 -2.936591 48.996427 0.000004 0.000000 0.436111 0.385E+03 lgRho_cntr log_rel_run_E_err -7.8560872101735857 rel_E_err 1.9518874191746349D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1770 0.99651309134922295 1.7019794551879181E+049 k, q, energy_removed_layers after adjustment is 1849 0.99207541126995780 2.2088034721225847E+049 Layers above q= 0.99207541126995780 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8482.5761718750000 max vel inside fraction of cutoff 3716.7200117704838 max c/cs inside fraction of cutoff 2.8496061798238763 average v/vesc outside cutoff 1.0239428215277155 Kinetic plus potential energy outside cutoff 2.2088034721225847E+049 mass inside cutoff 1849 51.269207173665762 relax counter 0 log max v [km/s]= 4.3029232225168785 check gamma integral 4.9383524830201898E-002 3430 8.760638 4.455E+05 -23.613036 3.068643 51.678740 0.000000 0.000000 0.000000 0.213409 -3.308059 2560 208 -7.5664E+00 8.760440 0.622499 -6.643935 5.548261 -99.000000 51.678740 0.000000 0.048232 0.786591 0.600862 5 2.8821E+05 3.979472 8.794946 3.068643 -26.756993 -3.037153 48.996427 0.000004 0.000000 0.436111 0.397E+03 lgRho_cntr log_rel_run_E_err -7.8554918956302595 rel_E_err 1.9031280775742869D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1791 0.99559208047115511 2.2066206306409730E+049 k, q, energy_removed_layers after adjustment is 1864 0.99083274365396334 2.7301998851976688E+049 Layers above q= 0.99083274365396334 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8491.5761718750000 max vel inside fraction of cutoff 3641.7797139026620 max c/cs inside fraction of cutoff 2.8865059161272044 average v/vesc outside cutoff 1.0394270361651421 Kinetic plus potential energy outside cutoff 2.7301998851976688E+049 mass inside cutoff 1864 51.204987677114723 relax counter 0 log max v [km/s]= 4.3027759692597307 check gamma integral 4.9948039133666904E-002 3440 8.739727 4.205E+05 -23.911874 3.012726 51.678740 0.000000 0.000000 0.000000 0.213409 -3.362812 2556 208 -7.4886E+00 8.739536 0.653168 -7.975332 5.332218 -99.000000 51.678740 0.000000 0.048232 0.786591 0.602914 5 2.8821E+05 3.921203 8.756125 3.012726 -29.251000 -3.149273 48.996427 0.000004 0.000000 0.436111 0.409E+03 lgRho_cntr log_rel_run_E_err -7.8549104015672739 rel_E_err 1.7612680431682363D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1806 0.99452252183744694 2.7966993667253900E+049 k, q, energy_removed_layers after adjustment is 1871 0.98955793692920602 3.3073121093027760E+049 Layers above q= 0.98955793692920602 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8502.2500000000000 max vel inside fraction of cutoff 3554.0287703810673 max c/cs inside fraction of cutoff 2.9264141392150380 average v/vesc outside cutoff 1.0583573977516791 Kinetic plus potential energy outside cutoff 3.3073121093027760E+049 mass inside cutoff 1871 51.139107271920217 relax counter 0 log max v [km/s]= 4.3027459203960365 check gamma integral 5.0553812674808830E-002 3450 8.719144 3.966E+05 -24.216075 2.957687 51.678740 0.000000 0.000000 0.000000 0.213409 -3.416811 2569 208 -7.3237E+00 8.718962 0.684356 -9.394118 5.145570 -99.000000 51.678740 0.000000 0.048232 0.786591 0.604980 6 2.8821E+05 3.863935 8.716620 2.957687 -31.821106 -3.266274 48.996427 0.000004 0.000000 0.436111 0.419E+03 lgRho_cntr log_rel_run_E_err -7.8543681615560033 rel_E_err 1.6314687433051301D-12 Using fixed_vsurf 20000.000000000000 save photos/x450 for model 3450 k, q, energy_removed_layers before adjustment is 1833 0.99343124807348171 3.3806921932581317E+049 k, q, energy_removed_layers after adjustment is 1892 0.98831488514963017 3.8788094372101916E+049 Layers above q= 0.98831488514963017 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8513.9023437500000 max vel inside fraction of cutoff 3463.1647080558996 max c/cs inside fraction of cutoff 2.9616882094234116 average v/vesc outside cutoff 1.0742531929537358 Kinetic plus potential energy outside cutoff 3.8788094372101916E+049 mass inside cutoff 1892 51.074867922279367 relax counter 0 log max v [km/s]= 4.3030408079032680 check gamma integral 5.1148329213935181E-002 3460 8.699212 3.732E+05 -24.521293 2.904394 51.678740 0.000000 0.000000 0.000000 0.213409 -3.469181 2566 208 -7.4239E+00 8.699039 0.715665 -10.883563 4.979234 -99.000000 51.678740 0.000000 0.048232 0.786591 0.607025 5 2.8821E+05 3.808566 8.674015 2.904394 -34.424031 -3.389913 48.996427 0.000004 0.000000 0.436111 0.429E+03 lgRho_cntr log_rel_run_E_err -7.8538600254903406 rel_E_err 1.5320818941263584D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1844 0.99236274366497457 3.9546951578908974E+049 k, q, energy_removed_layers after adjustment is 1896 0.98717430593862432 4.4268891364639782E+049 Layers above q= 0.98717430593862432 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8526.4746093750000 max vel inside fraction of cutoff 3369.1889410789640 max c/cs inside fraction of cutoff 2.9982040245954971 average v/vesc outside cutoff 1.0913598816863590 Kinetic plus potential energy outside cutoff 4.4268891364639782E+049 mass inside cutoff 1896 51.015924225859983 relax counter 0 log max v [km/s]= 4.3024730606652239 check gamma integral 5.1723098163748191E-002 3470 8.678285 3.501E+05 -24.854989 2.848436 51.678740 0.000000 0.000000 0.000000 0.213409 -3.524262 2571 208 -7.3422E+00 8.678124 0.749940 -12.585334 4.812352 -99.000000 51.678740 0.000000 0.048232 0.786591 0.609216 5 2.8821E+05 3.750515 8.631306 2.848436 -37.284077 -3.527653 48.996427 0.000004 0.000000 0.436111 0.437E+03 lgRho_cntr log_rel_run_E_err -7.8533927276996787 rel_E_err 1.4719387534784223D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1859 0.99119493808787118 4.5573760351229310E+049 k, q, energy_removed_layers after adjustment is 1907 0.98599138404641240 4.9882655863484247E+049 Layers above q= 0.98599138404641240 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8541.3183593750000 max vel inside fraction of cutoff 3274.8807578075571 max c/cs inside fraction of cutoff 3.0449057177475223 average v/vesc outside cutoff 1.1142202068798441 Kinetic plus potential energy outside cutoff 4.9882655863484247E+049 mass inside cutoff 1907 50.954792313030445 relax counter 0 log max v [km/s]= 4.3024196355903621 check gamma integral 5.2326310441363599E-002 3480 8.657797 3.268E+05 -25.197179 2.793659 51.678740 0.000000 0.000000 0.000000 0.213409 -3.578253 2577 208 -7.1683E+00 8.657650 0.785177 -14.391230 4.652404 -99.000000 51.678740 0.000000 0.048232 0.786591 0.611409 6 2.8821E+05 3.693772 8.581999 2.793659 -40.216175 -3.667989 48.996427 0.000004 0.000000 0.436111 0.445E+03 lgRho_cntr log_rel_run_E_err -7.8529491057342922 rel_E_err 1.3431609300221213D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1871 0.99008305048808498 5.1224604705831749E+049 k, q, energy_removed_layers after adjustment is 1916 0.98490897252576082 5.5189607411593516E+049 Layers above q= 0.98490897252576082 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8557.8476562500000 max vel inside fraction of cutoff 3168.6538633587356 max c/cs inside fraction of cutoff 3.0761805471982098 average v/vesc outside cutoff 1.1377431044003663 Kinetic plus potential energy outside cutoff 5.5189607411593516E+049 mass inside cutoff 1916 50.898854649553414 relax counter 0 log max v [km/s]= 4.3026413853328238 check gamma integral 5.2917382937692083E-002 3490 8.637973 3.044E+05 -25.545777 2.740664 51.678740 0.000000 0.000000 0.000000 0.213409 -3.630543 2578 208 -7.2527E+00 8.637840 0.821222 -16.204818 4.498892 -99.000000 51.678740 0.000000 0.048232 0.786591 0.613576 5 2.8821E+05 3.638952 8.530952 2.740664 -43.184047 -3.817816 48.996427 0.000004 0.000000 0.436111 0.455E+03 lgRho_cntr log_rel_run_E_err -7.8525341576649552 rel_E_err 1.3103708219673138D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1879 0.98903406690332163 5.6501347736339143E+049 k, q, energy_removed_layers after adjustment is 1918 0.98406815318485830 6.0113704275860015E+049 Layers above q= 0.98406815318485830 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8576.2031250000000 max vel inside fraction of cutoff 3063.1853951871271 max c/cs inside fraction of cutoff 3.1099481640456830 average v/vesc outside cutoff 1.1648341566588791 Kinetic plus potential energy outside cutoff 6.0113704275860015E+049 mass inside cutoff 1918 50.855402165503669 relax counter 0 log max v [km/s]= 4.3021224978460921 check gamma integral 5.3490391600382901E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 8.617275 2.809E+05 -25.933326 2.685298 51.678740 0.000000 0.000000 0.000000 0.213409 -3.685194 2581 208 -7.1525E+00 8.617160 0.861564 -17.976314 4.338813 -99.000000 51.678740 0.000000 0.048232 0.786591 0.615884 5 2.8821E+05 3.581803 8.471796 2.685298 -46.429524 -3.983474 48.996427 0.000004 0.000000 0.436111 0.469E+03 lgRho_cntr log_rel_run_E_err -7.8521454958359511 rel_E_err 1.2053769198219246D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile21.data for model 3500 save photos/x500 for model 3500 k, q, energy_removed_layers before adjustment is 1887 0.98781255850620231 6.2001497529561572E+049 k, q, energy_removed_layers after adjustment is 1922 0.98307276071961480 6.5011281688543413E+049 Layers above q= 0.98307276071961480 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8598.6386718750000 max vel inside fraction of cutoff 2952.4431576956190 max c/cs inside fraction of cutoff 3.1575407453859108 average v/vesc outside cutoff 1.1917041094612288 Kinetic plus potential energy outside cutoff 6.5011281688543413E+049 mass inside cutoff 1922 50.803961537160362 relax counter 0 log max v [km/s]= 4.3020666633114679 check gamma integral 5.4091449678521246E-002 3510 8.596768 2.570E+05 -26.348431 2.633180 51.678740 0.000000 0.000000 0.000000 0.213409 -3.739373 2584 208 -7.0336E+00 8.596674 0.905200 -19.649627 4.180199 -99.000000 51.678740 0.000000 0.048232 0.786591 0.618218 6 2.8821E+05 3.525274 8.404823 2.633180 -49.794451 -4.164915 48.996427 0.000004 0.000000 0.436111 0.487E+03 lgRho_cntr log_rel_run_E_err -7.8517881872414321 rel_E_err 1.1025927220621536D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1893 0.98672752386878271 6.7063581500295027E+049 k, q, energy_removed_layers after adjustment is 1925 0.98210012813926773 6.9620276940113889E+049 Layers above q= 0.98210012813926773 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8625.3691406250000 max vel inside fraction of cutoff 2827.0295011368003 max c/cs inside fraction of cutoff 3.2008490027127459 average v/vesc outside cutoff 1.2181732119620121 Kinetic plus potential energy outside cutoff 6.9620276940113889E+049 mass inside cutoff 1925 50.753697110989528 relax counter 0 log max v [km/s]= 4.3020088740142519 check gamma integral 5.4690416284684712E-002 3520 8.576486 2.315E+05 -26.802839 2.585614 51.678740 0.000000 0.000000 0.000000 0.213409 -3.792972 2589 208 -6.9365E+00 8.576418 0.953826 -21.483941 4.022938 -99.000000 51.678740 0.000000 0.048232 0.786591 0.620574 5 2.8821E+05 3.469462 8.320491 2.585614 -53.279700 -4.359417 48.978890 0.000004 0.000000 0.436111 0.514E+03 lgRho_cntr log_rel_run_E_err -7.8514541156928814 rel_E_err 1.0562112908888095D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1901 0.98548522826627549 7.1917257044051442E+049 k, q, energy_removed_layers after adjustment is 1928 0.98126320087952024 7.3986226596698016E+049 Layers above q= 0.98126320087952024 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8658.4980468750000 max vel inside fraction of cutoff 2687.9001260217715 max c/cs inside fraction of cutoff 3.2397459320128354 average v/vesc outside cutoff 1.2504600421122580 Kinetic plus potential energy outside cutoff 7.3986226596698016E+049 mass inside cutoff 1928 50.710445764789597 relax counter 0 log max v [km/s]= 4.3018432759936545 check gamma integral 5.5288963916287570E-002 3530 8.556761 2.045E+05 -27.315740 2.539166 51.678740 0.000000 0.000000 0.000000 0.213409 -3.845098 2587 208 -6.8337E+00 8.556724 1.010364 -23.659413 3.869410 -99.000000 51.678740 0.000000 0.048232 0.786591 0.622913 6 2.8821E+05 3.415282 8.217953 2.539166 -56.827411 -4.573102 48.978890 0.000004 0.000000 0.436111 0.552E+03 lgRho_cntr log_rel_run_E_err -7.8511472390522385 rel_E_err 9.4561226404632948D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1901 0.98441965906350570 7.6478874132784332E+049 k, q, energy_removed_layers after adjustment is 1926 0.98055414606112168 7.8153577158541782E+049 Layers above q= 0.98055414606112168 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8701.9863281250000 max vel inside fraction of cutoff 2549.6522205550200 max c/cs inside fraction of cutoff 3.3064700693886553 average v/vesc outside cutoff 1.2946649261167844 Kinetic plus potential energy outside cutoff 7.8153577158541782E+049 mass inside cutoff 1926 50.673802705230820 relax counter 0 log max v [km/s]= 4.3016572252917511 check gamma integral 5.5880640136648681E-002 3540 8.538016 1.732E+05 -27.968578 2.494826 51.678740 0.000000 0.000000 0.000000 0.213409 -3.894615 2598 208 -6.5274E+00 8.538016 1.087055 -26.670693 3.722284 -99.000000 51.678740 0.000000 0.048232 0.786591 0.625179 6 2.8821E+05 3.363889 8.082936 2.494826 -60.355108 -4.850151 48.978890 0.000004 0.000000 0.436111 0.617E+03 lgRho_cntr log_rel_run_E_err -7.8508672970137399 rel_E_err 8.8835793135601178D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1906 0.98307276071961547 8.1363821399988302E+049 k, q, energy_removed_layers after adjustment is 1928 0.97978326216487877 8.2501613999851023E+049 Layers above q= 0.97978326216487877 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8770.7929687500000 max vel inside fraction of cutoff 2346.2749215889130 max c/cs inside fraction of cutoff 3.3513217849643175 average v/vesc outside cutoff 1.3614467476290828 Kinetic plus potential energy outside cutoff 8.2501613999851023E+049 mass inside cutoff 1928 50.633964396837790 relax counter 0 log max v [km/s]= 4.3016577851195246 check gamma integral 5.6462434427509749E-002 3550 8.533276 1.357E+05 -28.758780 2.483214 51.678740 0.000000 0.000000 0.000000 0.213409 -3.907169 2572 208 -6.3221E+00 8.533276 1.200067 -31.046707 3.680794 -99.000000 51.678740 0.000000 0.048232 0.786591 0.625758 6 2.8821E+05 3.350878 7.885348 2.483214 -61.303794 -5.235723 48.978890 0.000004 0.000000 0.436111 0.740E+03 varcontrol log_rel_run_E_err -7.8506092783258179 rel_E_err 8.4163797412412708D-13 Using fixed_vsurf 20000.000000000000 save photos/x550 for model 3550 k, q, energy_removed_layers before adjustment is 1863 0.98153101655616748 8.6166469253608694E+049 k, q, energy_removed_layers after adjustment is 1879 0.97897340140057865 8.6835104338588815E+049 Layers above q= 0.97897340140057865 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -8897.1230468750000 max vel inside fraction of cutoff 2069.4941986869203 max c/cs inside fraction of cutoff 3.4195839224767828 average v/vesc outside cutoff 1.4582267399971789 Kinetic plus potential energy outside cutoff 8.6835104338588815E+049 mass inside cutoff 1879 50.592111813016992 relax counter 0 log max v [km/s]= 4.3014116163543727 check gamma integral 5.6669118789789669E-002 3560 8.555912 1.144E+05 -29.081401 2.536027 51.678740 0.000000 0.000000 0.000000 0.213409 -3.847817 2568 208 -6.6354E+00 8.555912 1.283469 -32.024976 3.851455 -99.000000 51.678740 0.000000 0.048232 0.786591 0.622893 5 2.8821E+05 3.412803 7.755465 2.536027 -57.062073 -5.533418 48.978890 0.000004 0.000000 0.436111 0.816E+03 lgRho_cntr log_rel_run_E_err -7.8503556641349359 rel_E_err 8.3807050905675273D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1838 0.98070146392936253 8.8532239128742620E+049 k, q, energy_removed_layers after adjustment is 1850 0.97864857776569902 8.8957249188801773E+049 Layers above q= 0.97864857776569902 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9013.8613281250000 max vel inside fraction of cutoff 1869.2451236298086 max c/cs inside fraction of cutoff 3.4383870304785535 average v/vesc outside cutoff 1.5432439622606000 Kinetic plus potential energy outside cutoff 8.8957249188801773E+049 mass inside cutoff 1850 50.575325336865717 relax counter 0 log max v [km/s]= 4.3011324634009016 check gamma integral 5.6067474352377557E-002 3570 8.575886 1.064E+05 -29.092868 2.582631 51.678740 0.000000 0.000000 0.000000 0.213409 -3.795413 2577 208 -6.8114E+00 8.575886 1.319125 -31.363776 4.003796 -99.000000 51.678740 0.000000 0.048232 0.786591 0.620425 5 2.8821E+05 3.467552 7.700082 2.582631 -53.481576 -5.668777 48.978890 0.000004 0.000000 0.436111 0.855E+03 lgRho_cntr log_rel_run_E_err -7.8500975794444496 rel_E_err 8.6134579047437755D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1831 0.98040721728173597 8.9324012610317834E+049 k, q, energy_removed_layers after adjustment is 1841 0.97864857776569925 8.9672115169522221E+049 Layers above q= 0.97864857776569925 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9071.0312500000000 max vel inside fraction of cutoff 1789.2551414906002 max c/cs inside fraction of cutoff 3.4432798391032797 average v/vesc outside cutoff 1.5847382124160021 Kinetic plus potential energy outside cutoff 8.9672115169522221E+049 mass inside cutoff 1841 50.575325336865724 relax counter 0 log max v [km/s]= 4.3010850822101343 check gamma integral 5.5512250994645344E-002 3580 8.595105 1.009E+05 -29.022754 2.627364 51.678740 0.000000 0.000000 0.000000 0.213409 -3.744998 2574 208 -6.9094E+00 8.595105 1.344032 -30.736738 4.150743 -99.000000 51.678740 0.000000 0.048232 0.786591 0.618097 5 2.8821E+05 3.520313 7.658759 2.627364 -50.181509 -5.761812 48.978890 0.000004 0.000000 0.436111 0.888E+03 lgRho_cntr log_rel_run_E_err -7.8498279540123894 rel_E_err 9.3643754361705333D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1824 0.98025951032464165 8.9800381947758455E+049 k, q, energy_removed_layers after adjustment is 1834 0.97846678914250529 9.0113619399855988E+049 Layers above q= 0.97846678914250529 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9113.8437500000000 max vel inside fraction of cutoff 1721.2562347639430 max c/cs inside fraction of cutoff 3.4114247404824556 average v/vesc outside cutoff 1.6088569664462635 Kinetic plus potential energy outside cutoff 9.0113619399855988E+049 mass inside cutoff 1834 50.565930729884784 relax counter 0 log max v [km/s]= 4.3010677990097923 check gamma integral 5.4969090592138614E-002 3590 8.614039 9.682E+04 -28.896312 2.674208 51.678740 0.000000 0.000000 0.000000 0.213409 -3.695351 2569 208 -6.9815E+00 8.614039 1.363603 -30.138633 4.295720 -99.000000 51.678740 0.000000 0.048232 0.786591 0.615848 5 2.8821E+05 3.572365 7.625775 2.674208 -47.064667 -5.833612 48.978890 0.000004 0.000000 0.436111 0.916E+03 lgRho_cntr log_rel_run_E_err -7.8495465648397689 rel_E_err 9.2590448271724845D-13 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1811 0.98010223337953051 9.0155665696976117E+049 k, q, energy_removed_layers after adjustment is 1820 0.97846678914250529 9.0430104458192567E+049 Layers above q= 0.97846678914250529 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9149.2480468750000 max vel inside fraction of cutoff 1677.0535962123213 max c/cs inside fraction of cutoff 3.4060092934030446 average v/vesc outside cutoff 1.6325933506101595 Kinetic plus potential energy outside cutoff 9.0430104458192567E+049 mass inside cutoff 1820 50.565930729884784 relax counter 0 log max v [km/s]= 4.3010582577011629 check gamma integral 5.4428577904126710E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 8.632809 9.358E+04 -28.734662 2.724073 51.678740 0.000000 0.000000 0.000000 0.213409 -3.646163 2578 208 -7.0400E+00 8.632809 1.379804 -29.567123 4.439644 -99.000000 51.678740 0.000000 0.048232 0.786591 0.613660 5 2.8821E+05 3.624038 7.599040 2.724073 -44.101258 -5.892562 48.978890 0.000004 0.000000 0.436111 0.938E+03 lgRho_cntr log_rel_run_E_err -7.8492529882967856 rel_E_err 9.8366757624265995D-13 Using fixed_vsurf 20000.000000000000 save LOGS/profile22.data for model 3600 save photos/x600 for model 3600 k, q, energy_removed_layers before adjustment is 1811 0.97994477626994125 9.0439453662583420E+049 k, q, energy_removed_layers after adjustment is 1819 0.97846678914250507 9.0673092545437430E+049 Layers above q= 0.97846678914250507 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9179.7910156250000 max vel inside fraction of cutoff 1640.3988795044879 max c/cs inside fraction of cutoff 3.3993969048637913 average v/vesc outside cutoff 1.6525854748555600 Kinetic plus potential energy outside cutoff 9.0673092545437430E+049 mass inside cutoff 1819 50.565930729884762 relax counter 0 log max v [km/s]= 4.3010521639853723 check gamma integral 5.3888951296649938E-002 3610 8.651463 9.094E+04 -28.543317 2.773662 51.678740 0.000000 0.000000 0.000000 0.213409 -3.597315 2585 208 -7.0898E+00 8.651463 1.393639 -29.020519 4.583085 -99.000000 51.678740 0.000000 0.048232 0.786591 0.611527 5 2.8821E+05 3.675465 7.576937 2.773662 -41.275592 -5.943381 48.978890 0.000004 0.000000 0.436111 0.955E+03 lgRho_cntr log_rel_run_E_err -7.8489396043482014 rel_E_err 1.0886602963603214D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1809 0.97994477626994125 9.0626449026492103E+049 k, q, energy_removed_layers after adjustment is 1817 0.97846678914250507 9.0867865729608151E+049 Layers above q= 0.97846678914250507 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9206.7929687500000 max vel inside fraction of cutoff 1609.0875532228411 max c/cs inside fraction of cutoff 3.3921944869636715 average v/vesc outside cutoff 1.6699128811390243 Kinetic plus potential energy outside cutoff 9.0867865729608151E+049 mass inside cutoff 1817 50.565930729884762 relax counter 0 log max v [km/s]= 4.3010480101230408 check gamma integral 5.3349436856306047E-002 3620 8.670030 8.872E+04 -28.323756 2.823043 51.678740 0.000000 0.000000 0.000000 0.213409 -3.548742 2590 208 -7.1335E+00 8.670030 1.405709 -28.497424 4.726809 -99.000000 51.678740 0.000000 0.048232 0.786591 0.609444 5 2.8821E+05 3.726721 7.558143 2.823043 -38.576559 -5.988225 48.978890 0.000004 0.000000 0.436111 0.969E+03 lgRho_cntr log_rel_run_E_err -7.8486178077333681 rel_E_err 1.0419405752611849D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1806 0.97978326216487965 9.0853904749873929E+049 k, q, energy_removed_layers after adjustment is 1813 0.97846678914250529 9.1028734296199193E+049 Layers above q= 0.97846678914250529 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9231.0566406250000 max vel inside fraction of cutoff 1581.7855576255336 max c/cs inside fraction of cutoff 3.3847213569547634 average v/vesc outside cutoff 1.6852260333703482 Kinetic plus potential energy outside cutoff 9.1028734296199193E+049 mass inside cutoff 1813 50.565930729884784 relax counter 0 log max v [km/s]= 4.3010450436607686 check gamma integral 5.2809398719698891E-002 3630 8.688529 8.682E+04 -28.072649 2.872260 51.678740 0.000000 0.000000 0.000000 0.213409 -3.500401 2598 208 -7.1730E+00 8.688529 1.416400 -27.996941 4.872052 -99.000000 51.678740 0.000000 0.048232 0.786591 0.607408 5 2.8821E+05 3.777856 7.541894 2.872260 -35.995391 -6.028278 48.978890 0.000004 0.000000 0.436111 0.980E+03 lgRho_cntr log_rel_run_E_err -7.8482815244120792 rel_E_err 1.1430259896107023D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1804 0.97978326216487965 9.0985373450128911E+049 k, q, energy_removed_layers after adjustment is 1812 0.97828363890540504 9.1164656848529625E+049 Layers above q= 0.97828363890540504 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9253.1210937500000 max vel inside fraction of cutoff 1559.3271698601250 max c/cs inside fraction of cutoff 3.3320419866417699 average v/vesc outside cutoff 1.6907286802603814 Kinetic plus potential energy outside cutoff 9.1164656848529625E+049 mass inside cutoff 1812 50.556465756412877 relax counter 0 log max v [km/s]= 4.3010428241463021 check gamma integral 5.2268622059992179E-002 3640 8.706968 8.517E+04 -27.784173 2.921338 51.678740 0.000000 0.000000 0.000000 0.213409 -3.452276 2597 208 -7.2092E+00 8.706968 1.425978 -27.518379 5.021029 -99.000000 51.678740 0.000000 0.048232 0.786591 0.605417 4 2.8821E+05 3.828896 7.527740 2.921338 -33.525179 -6.064462 48.978890 0.000004 0.000000 0.436111 0.990E+03 lgRho_cntr log_rel_run_E_err -7.8479274883614316 rel_E_err 1.2099631085024869D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1800 0.97978326216487943 9.1098290917792821E+049 k, q, energy_removed_layers after adjustment is 1808 0.97828363890540482 9.1281549121105192E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9273.3515625000000 max vel inside fraction of cutoff 1724.6326388283753 max c/cs inside fraction of cutoff 3.3235020365427581 average v/vesc outside cutoff 1.7030498218404371 Kinetic plus potential energy outside cutoff 9.1281549121105192E+049 mass inside cutoff 1808 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010410977169764 check gamma integral 5.1727161888401922E-002 3650 8.725355 8.372E+04 -27.444490 2.970289 51.678740 0.000000 0.000000 0.000000 0.213409 -3.404357 2600 208 -7.2426E+00 8.725355 1.434638 -27.061023 5.177596 -99.000000 51.678740 0.000000 0.048232 0.786591 0.603469 4 2.8821E+05 3.879859 7.515313 2.970289 -31.159884 -6.097487 48.978890 0.000004 0.000000 0.436111 0.998E+03 lgRho_cntr log_rel_run_E_err -7.8475521410578004 rel_E_err 1.2762208035218604D-12 Using fixed_vsurf 20000.000000000000 save photos/x650 for model 3650 k, q, energy_removed_layers before adjustment is 1797 0.97954065053530770 9.1259591293147044E+049 k, q, energy_removed_layers after adjustment is 1804 0.97828363890540482 9.1383206364399528E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9292.0312500000000 max vel inside fraction of cutoff 1892.4966583967191 max c/cs inside fraction of cutoff 3.3151217236272319 average v/vesc outside cutoff 1.7142939499571412 Kinetic plus potential energy outside cutoff 9.1383206364399528E+049 mass inside cutoff 1804 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010397175247634 check gamma integral 5.1185134376195311E-002 3660 8.743691 8.244E+04 -27.035825 3.019116 51.678740 0.000000 0.000000 0.000000 0.213409 -3.356650 2606 208 -7.2735E+00 8.743691 1.442530 -26.624177 5.347739 -99.000000 51.678740 0.000000 0.048232 0.786591 0.601564 4 2.8821E+05 3.930746 7.504299 3.019116 -28.894555 -6.127918 48.978890 0.000004 0.000000 0.436111 0.101E+04 lgRho_cntr log_rel_run_E_err -7.8471594101790343 rel_E_err 1.3401002450001295D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1793 0.97954065053530748 9.1346669402829885E+049 k, q, energy_removed_layers after adjustment is 1800 0.97828363890540460 9.1472631957769040E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9309.3867187500000 max vel inside fraction of cutoff 2075.8947993754232 max c/cs inside fraction of cutoff 3.3069282794350539 average v/vesc outside cutoff 1.7246278071565722 Kinetic plus potential energy outside cutoff 9.1472631957769040E+049 mass inside cutoff 1800 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010385974001224 check gamma integral 5.0642553920392262E-002 3670 8.761976 8.129E+04 -26.538188 3.067816 51.678740 0.000000 0.000000 0.000000 0.213409 -3.309161 2601 208 -7.3019E+00 8.761976 1.449776 -26.206437 5.539253 -99.000000 51.678740 0.000000 0.048232 0.786591 0.599700 4 2.8821E+05 3.981559 7.494446 3.067816 -26.724512 -6.156216 48.978890 0.000004 0.000000 0.436111 0.101E+04 lgRho_cntr log_rel_run_E_err -7.8467353884137783 rel_E_err 1.4267446519755946D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1788 0.97954065053530748 9.1424130857784357E+049 k, q, energy_removed_layers after adjustment is 1795 0.97828363890540460 9.1552128950650893E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9325.5976562500000 max vel inside fraction of cutoff 2263.4392034089096 max c/cs inside fraction of cutoff 3.2989280154499889 average v/vesc outside cutoff 1.7341907578653961 Kinetic plus potential energy outside cutoff 9.1552128950650893E+049 mass inside cutoff 1795 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010376794384504 check gamma integral 5.0098985329536834E-002 3680 8.780211 8.026E+04 -25.975210 3.116395 51.678740 0.000000 0.000000 0.000000 0.213409 -3.261891 2601 208 -7.3278E+00 8.780211 1.456477 -25.805993 5.759508 -99.000000 51.678740 0.000000 0.048232 0.786591 0.597879 4 2.8821E+05 4.032301 7.485559 3.116395 -24.645111 -6.182717 48.978890 0.000004 0.000000 0.436111 0.102E+04 lgRho_cntr log_rel_run_E_err -7.8462993610905478 rel_E_err 1.4112846141049277D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1786 0.97954065053530770 9.1493707810758591E+049 k, q, energy_removed_layers after adjustment is 1793 0.97828363890540482 9.1623491951145487E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9340.8339843750000 max vel inside fraction of cutoff 2458.5166586563405 max c/cs inside fraction of cutoff 3.2911152329468654 average v/vesc outside cutoff 1.7430988147696918 Kinetic plus potential energy outside cutoff 9.1623491951145487E+049 mass inside cutoff 1793 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010369530753980 check gamma integral 4.9553704231801075E-002 3690 8.798400 7.931E+04 -25.405858 3.164857 51.678740 0.000000 0.000000 0.000000 0.213409 -3.214841 2616 208 -7.3515E+00 8.798400 1.462714 -25.422018 6.011713 -99.000000 51.678740 0.000000 0.048232 0.786591 0.596098 4 2.8821E+05 4.082980 7.477480 3.164857 -22.652071 -6.207651 48.978890 0.000004 0.000000 0.436111 0.102E+04 lgRho_cntr log_rel_run_E_err -7.8458306355654104 rel_E_err 1.5883122601425654D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1786 0.97954065053530770 9.1556739945790483E+049 k, q, energy_removed_layers after adjustment is 1793 0.97828363890540482 9.1688107930997680E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9355.2285156250000 max vel inside fraction of cutoff 2672.7223388632892 max c/cs inside fraction of cutoff 3.2834795045957148 average v/vesc outside cutoff 1.7514461636503380 Kinetic plus potential energy outside cutoff 9.1688107930997680E+049 mass inside cutoff 1793 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010363659093400 check gamma integral 4.9005976209497877E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 8.816539 7.845E+04 -24.882518 3.213197 51.678740 0.000000 0.000000 0.000000 0.213409 -3.168022 2621 208 -7.3728E+00 8.816539 1.468555 -25.053994 6.292671 -99.000000 51.678740 0.000000 0.048232 0.786591 0.594358 5 2.8821E+05 4.133589 7.470077 3.213197 -20.741698 -6.231200 48.978890 0.000004 0.000000 0.436111 0.103E+04 lgRho_cntr log_rel_run_E_err -7.8453336272028675 rel_E_err 1.7072366838496261D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile23.data for model 3700 save photos/x700 for model 3700 k, q, energy_removed_layers before adjustment is 1784 0.97954065053530748 9.1614296004741770E+049 k, q, energy_removed_layers after adjustment is 1791 0.97828363890540460 9.1747081876724370E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9368.8984375000000 max vel inside fraction of cutoff 2907.3809934544720 max c/cs inside fraction of cutoff 3.2760044675654796 average v/vesc outside cutoff 1.7593134588377795 Kinetic plus potential energy outside cutoff 9.1747081876724370E+049 mass inside cutoff 1791 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010358713679517 check gamma integral 4.8454674259896524E-002 3710 8.834638 7.764E+04 -24.418922 3.261445 51.678740 0.000000 0.000000 0.000000 0.213409 -3.121412 2622 208 -7.3925E+00 8.834638 1.474058 -24.701181 6.594512 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592658 5 2.8821E+05 4.184156 7.463237 3.261445 -18.909059 -6.253519 48.978890 0.000004 0.000000 0.436111 0.103E+04 lgRho_cntr log_rel_run_E_err -7.8448103628568200 rel_E_err 1.8436597068905996D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1781 0.97954065053530748 9.1667240963262638E+049 k, q, energy_removed_layers after adjustment is 1788 0.97828363890540460 9.1801307517328524E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9381.9414062500000 max vel inside fraction of cutoff 3175.9317867429286 max c/cs inside fraction of cutoff 3.2686715633729122 average v/vesc outside cutoff 1.7667690400642255 Kinetic plus potential energy outside cutoff 9.1801307517328524E+049 mass inside cutoff 1788 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010354444961800 check gamma integral 4.7898418918386879E-002 3720 8.852710 7.690E+04 -24.006105 3.311210 51.678740 0.000000 0.000000 0.000000 0.213409 -3.074979 2623 208 -7.4120E+00 8.852710 1.479253 -24.242890 6.907569 -99.000000 51.678740 0.000000 0.048232 0.786591 0.590998 5 2.8821E+05 4.234717 7.456891 3.311210 -17.150242 -6.274687 48.978890 0.000004 0.000000 0.436111 0.104E+04 lgRho_cntr log_rel_run_E_err -7.8442514780737618 rel_E_err 2.0186479398903005D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1778 0.97954065053530748 9.1716123925727814E+049 k, q, energy_removed_layers after adjustment is 1785 0.97828363890540460 9.1851353019495980E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9394.4160156250000 max vel inside fraction of cutoff 3445.0812585086596 max c/cs inside fraction of cutoff 3.3884788740753415 average v/vesc outside cutoff 1.7738486645293861 Kinetic plus potential energy outside cutoff 9.1851353019495980E+049 mass inside cutoff 1785 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010350578745919 check gamma integral 4.7337127023945387E-002 3730 8.870718 7.620E+04 -23.638865 3.364643 51.678740 0.000000 0.000000 0.000000 0.213409 -3.028811 2654 208 -7.4285E+00 8.870718 1.484177 -21.237684 7.223101 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589383 5 2.8821E+05 4.285175 7.450966 3.364643 -15.465553 -6.294798 48.978890 0.000004 0.000000 0.436111 0.104E+04 lgRho_cntr log_rel_run_E_err -7.8433855325337465 rel_E_err 4.5304980784954070D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1775 0.97954065053530748 9.1761483246404275E+049 k, q, energy_removed_layers after adjustment is 1782 0.97828363890540460 9.1897774368006922E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9406.3710937500000 max vel inside fraction of cutoff 3743.7918095739860 max c/cs inside fraction of cutoff 3.6140175935484944 average v/vesc outside cutoff 1.7805942868871689 Kinetic plus potential energy outside cutoff 9.1897774368006922E+049 mass inside cutoff 1782 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010347361364847 check gamma integral 4.6768643949018876E-002 3740 8.888641 7.555E+04 -23.323985 3.416956 51.678740 0.000000 0.000000 0.000000 0.213409 -2.982946 2656 208 -7.4396E+00 8.888641 1.488898 -18.329423 7.535927 -99.000000 51.678740 0.000000 0.048232 0.786591 0.587817 5 2.8821E+05 4.335478 7.445365 3.416956 -13.852437 -6.314110 48.978890 0.000004 0.000000 0.436111 0.105E+04 lgRho_cntr log_rel_run_E_err -7.8354686083250042 rel_E_err 6.1127859245829132D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1773 0.97929735796177764 9.1839304934112208E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540437 9.1941367428211982E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9417.9609375000000 max vel inside fraction of cutoff 3998.4722303530343 max c/cs inside fraction of cutoff 3.8798806649964144 average v/vesc outside cutoff 1.7870943551736076 Kinetic plus potential energy outside cutoff 9.1941367428211982E+049 mass inside cutoff 1779 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010344937050267 check gamma integral 4.6186451990778178E-002 3750 8.906493 7.492E+04 -23.064435 3.470107 51.678740 0.000000 0.000000 0.000000 0.213409 -2.937328 2659 208 -7.4468E+00 8.906493 1.493474 -16.073295 7.842787 -99.000000 51.678740 0.000000 0.048232 0.786591 0.586302 5 2.8821E+05 4.385671 7.440008 3.470107 -12.306694 -6.332839 48.978890 0.000004 0.000000 0.436111 0.105E+04 lgRho_cntr log_rel_run_E_err -7.8011467222595767 rel_E_err 1.7007908189690788D-10 Using fixed_vsurf 20000.000000000000 save photos/x750 for model 3750 k, q, energy_removed_layers before adjustment is 1772 0.97929735796177764 9.1879943096828091E+049 k, q, energy_removed_layers after adjustment is 1778 0.97828363890540437 9.1982791111303696E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9429.3203125000000 max vel inside fraction of cutoff 4172.0522914842386 max c/cs inside fraction of cutoff 4.0719540918733452 average v/vesc outside cutoff 1.7934261696601437 Kinetic plus potential energy outside cutoff 9.1982791111303696E+049 mass inside cutoff 1778 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010343029594837 check gamma integral 4.5583700835466250E-002 3760 8.925894 7.426E+04 -22.829463 3.528923 51.678740 0.000000 0.000000 0.000000 0.213409 -2.887809 2664 208 -7.4081E+00 8.925894 1.498374 -14.310608 8.168443 -99.000000 51.678740 0.000000 0.048232 0.786591 0.584709 5 2.8821E+05 4.440328 7.434350 3.528923 -10.693341 -6.352888 48.978890 0.000004 0.000000 0.436111 0.106E+04 lgRho_cntr log_rel_run_E_err -7.7443089166994676 rel_E_err 2.1537355562468222D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1768 0.97929735796177764 9.1922596612176780E+049 k, q, energy_removed_layers after adjustment is 1774 0.97828363890540437 9.2026257361977219E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9441.6152343750000 max vel inside fraction of cutoff 4353.0539872083673 max c/cs inside fraction of cutoff 4.2929397725554921 average v/vesc outside cutoff 1.8002416602503402 Kinetic plus potential energy outside cutoff 9.2026257361977219E+049 mass inside cutoff 1774 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010345591199703 check gamma integral 4.4895085574768956E-002 3770 8.945366 7.359E+04 -22.629318 3.590136 51.678740 0.000000 0.000000 0.000000 0.213409 -2.838087 2677 208 -7.4187E+00 8.945366 1.503331 -12.786203 8.486054 -99.000000 51.678740 0.000000 0.048232 0.786591 0.583178 5 2.8821E+05 4.495328 7.428704 3.590136 -9.140251 -6.373138 48.978890 0.000004 0.000000 0.436111 0.106E+04 lgRho_cntr log_rel_run_E_err -7.6825960019222368 rel_E_err 3.0663956270922298D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1766 0.97929735796177764 9.1964853042147847E+049 k, q, energy_removed_layers after adjustment is 1772 0.97828363890540437 9.2069306992085743E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9454.1933593750000 max vel inside fraction of cutoff 4469.8419158124061 max c/cs inside fraction of cutoff 4.4371273859698661 average v/vesc outside cutoff 1.8071722284842213 Kinetic plus potential energy outside cutoff 9.2069306992085743E+049 mass inside cutoff 1772 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010343176021850 check gamma integral 4.4157196993667491E-002 3780 8.964821 7.291E+04 -22.450136 3.655735 51.678740 0.000000 0.000000 0.000000 0.213409 -2.788289 2684 208 -7.3245E+00 8.964821 1.508526 -11.441423 8.792577 -99.000000 51.678740 0.000000 0.048232 0.786591 0.581730 6 2.8821E+05 4.550457 7.422870 3.655735 -7.652920 -6.394313 48.978890 0.000004 0.000000 0.436111 0.107E+04 max increase log_rel_run_E_err -7.6602648620181757 rel_E_err 2.4653061734385612D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1764 0.97929735796177764 9.2008199241304182E+049 k, q, energy_removed_layers after adjustment is 1770 0.97828363890540437 9.2113454089530293E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9467.5312500000000 max vel inside fraction of cutoff 4568.2315245960417 max c/cs inside fraction of cutoff 4.5125133231022039 average v/vesc outside cutoff 1.8144760647040092 Kinetic plus potential energy outside cutoff 9.2113454089530293E+049 mass inside cutoff 1770 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010351657736745 check gamma integral 4.3358390243491640E-002 3790 8.984542 7.210E+04 -22.264179 3.730267 51.678740 0.000000 0.000000 0.000000 0.213409 -2.737574 2692 208 -7.2151E+00 8.984542 1.514771 -10.259673 9.092087 -99.000000 51.678740 0.000000 0.048232 0.786591 0.580362 6 2.8821E+05 4.606552 7.415977 3.730267 -6.206577 -6.419692 48.978890 0.000004 0.000000 0.436111 0.107E+04 max increase log_rel_run_E_err -7.6242190254826934 rel_E_err 2.7128422907895483D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1761 0.97929735796177786 9.2059046416065836E+049 k, q, energy_removed_layers after adjustment is 1767 0.97828363890540460 9.2165223752978432E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9483.7792968750000 max vel inside fraction of cutoff 4606.5337568844097 max c/cs inside fraction of cutoff 4.6485506209484164 average v/vesc outside cutoff 1.8233109319559693 Kinetic plus potential energy outside cutoff 9.2165223752978432E+049 mass inside cutoff 1767 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010363355158825 check gamma integral 4.2458104971132449E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 8.996140 7.121E+04 -22.107141 3.782600 51.678740 0.000000 0.000000 0.000000 0.213409 -2.707528 2705 208 -7.1482E+00 8.996140 1.521732 -9.206973 9.264755 -99.000000 51.678740 0.000000 0.048232 0.786591 0.579621 6 2.8821E+05 4.639680 7.408425 3.782600 -5.378623 -6.447883 48.978890 0.000004 0.000000 0.436111 0.108E+04 min_dr_div_cs log_rel_run_E_err -7.6237134926686689 rel_E_err 2.7381594288091051D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile24.data for model 3800 save photos/x800 for model 3800 k, q, energy_removed_layers before adjustment is 1759 0.97929735796177764 9.2114153538357892E+049 k, q, energy_removed_layers after adjustment is 1765 0.97828363890540437 9.2221309128578813E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9502.1718750000000 max vel inside fraction of cutoff 4580.6661362356972 max c/cs inside fraction of cutoff 4.7295146550526548 average v/vesc outside cutoff 1.8332301627819672 Kinetic plus potential energy outside cutoff 9.2221309128578813E+049 mass inside cutoff 1765 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010370161241909 check gamma integral 4.1826120788676299E-002 3810 8.990866 7.004E+04 -22.000156 3.763484 51.678740 0.000000 0.000000 0.000000 0.213409 -2.721292 2710 208 -6.9797E+00 8.990866 1.531156 -8.284122 9.194560 -99.000000 51.678740 0.000000 0.048232 0.786591 0.579937 6 2.8821E+05 4.624568 7.398424 3.763484 -5.733701 -6.485917 48.978890 0.000004 0.000000 0.436111 0.109E+04 min_dr_div_cs log_rel_run_E_err -7.6148686226263402 rel_E_err 4.4902990383477760D-10 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1759 0.97929735796177764 9.2186156993859718E+049 k, q, energy_removed_layers after adjustment is 1765 0.97828363890540437 9.2294554735757564E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9527.5410156250000 max vel inside fraction of cutoff 4457.1580506796727 max c/cs inside fraction of cutoff 4.7604328164791783 average v/vesc outside cutoff 1.8467791246959253 Kinetic plus potential energy outside cutoff 9.2294554735757564E+049 mass inside cutoff 1765 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010395667200783 check gamma integral 4.1956288147645460E-002 3820 8.971524 6.894E+04 -22.091604 3.682036 51.678740 0.000000 0.000000 0.000000 0.213409 -2.771630 2726 208 -7.2026E+00 8.971512 1.540176 -7.772479 8.904911 -99.000000 51.678740 0.000000 0.048232 0.786591 0.581156 6 2.8821E+05 4.569242 7.389034 3.682036 -7.121963 -6.522171 48.978890 0.000004 0.000000 0.436111 0.110E+04 lgRho_cntr log_rel_run_E_err -7.6139833428126300 rel_E_err 2.8363615393613518D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1765 0.97929735796177741 9.2252443546388615E+049 k, q, energy_removed_layers after adjustment is 1771 0.97828363890540415 9.2361946876944659E+049 Layers above q= 0.97828363890540415 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9552.3398437500000 max vel inside fraction of cutoff 4388.8605378913144 max c/cs inside fraction of cutoff 4.8084717053600965 average v/vesc outside cutoff 1.8598771937390153 Kinetic plus potential energy outside cutoff 9.2361946876944659E+049 mass inside cutoff 1771 50.556465756412834 relax counter 0 log max v [km/s]= 4.3010354709858367 check gamma integral 4.2790189584671220E-002 3830 8.953450 6.824E+04 -22.259748 3.617733 51.678740 0.000000 0.000000 0.000000 0.213409 -2.818412 2736 208 -7.3159E+00 8.953419 1.546026 -7.730787 8.624761 -99.000000 51.678740 0.000000 0.048232 0.786591 0.582392 6 2.8821E+05 4.517732 7.383019 3.617733 -8.475388 -6.545587 48.978890 0.000004 0.000000 0.436111 0.111E+04 lgRho_cntr log_rel_run_E_err -7.6135067739702675 rel_E_err 2.6730956551150853D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1769 0.97929735796177741 9.2294154655262785E+049 k, q, energy_removed_layers after adjustment is 1775 0.97828363890540415 9.2404333971975820E+049 Layers above q= 0.97828363890540415 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9568.7050781250000 max vel inside fraction of cutoff 4216.5858146531573 max c/cs inside fraction of cutoff 4.7395120007098201 average v/vesc outside cutoff 1.8684415616716918 Kinetic plus potential energy outside cutoff 9.2404333971975820E+049 mass inside cutoff 1775 50.556465756412834 relax counter 0 log max v [km/s]= 4.3010340690995674 check gamma integral 4.3488540539097106E-002 3840 8.935418 6.765E+04 -22.453265 3.559380 51.678740 0.000000 0.000000 0.000000 0.213409 -2.864934 2752 208 -7.3621E+00 8.935374 1.551071 -8.040553 8.336568 -99.000000 51.678740 0.000000 0.048232 0.786591 0.583700 6 2.8821E+05 4.466520 7.377886 3.559380 -9.880151 -6.565690 48.978890 0.000004 0.000000 0.436111 0.111E+04 lgRho_cntr log_rel_run_E_err -7.6130522838668506 rel_E_err 2.5455095461420812D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1770 0.97929735796177764 9.2329311365640380E+049 k, q, energy_removed_layers after adjustment is 1776 0.97828363890540437 9.2440047695105746E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9582.9921875000000 max vel inside fraction of cutoff 4073.3062822496654 max c/cs inside fraction of cutoff 4.7019640151853048 average v/vesc outside cutoff 1.8758695474554323 Kinetic plus potential energy outside cutoff 9.2440047695105746E+049 mass inside cutoff 1776 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010335364083572 check gamma integral 4.4117334312285636E-002 3850 8.917567 6.711E+04 -22.648336 3.504334 51.678740 0.000000 0.000000 0.000000 0.213409 -2.910927 2747 208 -7.3832E+00 8.917513 1.555718 -8.520916 8.042625 -99.000000 51.678740 0.000000 0.048232 0.786591 0.585058 6 2.8821E+05 4.415963 7.373187 3.504334 -11.326832 -6.584130 48.978890 0.000004 0.000000 0.436111 0.111E+04 lgRho_cntr log_rel_run_E_err -7.6126235773292290 rel_E_err 2.2986548553710688D-12 Using fixed_vsurf 20000.000000000000 save photos/x850 for model 3850 k, q, energy_removed_layers before adjustment is 1774 0.97913516291275815 9.2392477478482977E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540460 9.2472280593326087E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9596.3007812500000 max vel inside fraction of cutoff 3911.0734238431637 max c/cs inside fraction of cutoff 4.6133458620356169 average v/vesc outside cutoff 1.8827493384799281 Kinetic plus potential energy outside cutoff 9.2472280593326087E+049 mass inside cutoff 1779 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010332579696380 check gamma integral 4.4690425413242432E-002 3860 8.899798 6.659E+04 -22.851239 3.450852 51.678740 0.000000 0.000000 0.000000 0.213409 -2.956709 2744 208 -7.3919E+00 8.899736 1.560170 -9.075308 7.742870 -99.000000 51.678740 0.000000 0.048232 0.786591 0.586462 6 2.8821E+05 4.365756 7.368708 3.450852 -12.823453 -6.601720 48.978890 0.000004 0.000000 0.436111 0.112E+04 lgRho_cntr log_rel_run_E_err -7.6122052021361855 rel_E_err 2.3669520095716991D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1774 0.97913516291275815 9.2422389698573313E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540460 9.2502569287585285E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9609.1835937500000 max vel inside fraction of cutoff 3739.3980096104879 max c/cs inside fraction of cutoff 4.5370992584309509 average v/vesc outside cutoff 1.8893738028523976 Kinetic plus potential energy outside cutoff 9.2502569287585285E+049 mass inside cutoff 1779 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010330899208187 check gamma integral 4.5221542567733079E-002 3870 8.880330 6.604E+04 -23.079549 3.393255 51.678740 0.000000 0.000000 0.000000 0.213409 -3.006943 2744 208 -7.3847E+00 8.880262 1.565005 -9.804563 7.407686 -99.000000 51.678740 0.000000 0.048232 0.786591 0.588049 6 2.8821E+05 4.310853 7.363862 3.393255 -14.531049 -6.620732 48.978890 0.000004 0.000000 0.436111 0.112E+04 lgRho_cntr log_rel_run_E_err -7.6117005763492607 rel_E_err 2.1440527129336142D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1774 0.97913516291275815 9.2454239903670942E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540460 9.2534811135768105E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9623.3261718750000 max vel inside fraction of cutoff 3543.1886535872090 max c/cs inside fraction of cutoff 4.4525044222957755 average v/vesc outside cutoff 1.8966050749057934 Kinetic plus potential energy outside cutoff 9.2534811135768105E+049 mass inside cutoff 1779 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010330274973052 check gamma integral 4.5771518001256208E-002 3880 8.859841 6.545E+04 -23.315949 3.333097 51.678740 0.000000 0.000000 0.000000 0.213409 -3.059917 2738 208 -7.2127E+00 8.859770 1.570209 -10.668954 7.049921 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589769 6 2.8821E+05 4.253185 7.358664 3.333097 -16.409036 -6.641093 48.978890 0.000004 0.000000 0.436111 0.113E+04 lgRho_cntr log_rel_run_E_err -7.6113143247471688 rel_E_err 2.5750725244492327D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1774 0.97913516291275793 9.2487804436811096E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540437 9.2568777560947331E+049 Layers above q= 0.97828363890540437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9638.7265625000000 max vel inside fraction of cutoff 3324.2579214029806 max c/cs inside fraction of cutoff 4.2965797336947613 average v/vesc outside cutoff 1.9044331576535993 Kinetic plus potential energy outside cutoff 9.2568777560947331E+049 mass inside cutoff 1779 50.556465756412841 relax counter 0 log max v [km/s]= 4.3010342883472426 check gamma integral 4.6329137865886619E-002 3890 8.839948 6.485E+04 -23.548760 3.275809 51.678740 0.000000 0.000000 0.000000 0.213409 -3.111461 2739 208 -7.3227E+00 8.839877 1.575492 -11.571944 6.703933 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591489 6 2.8821E+05 4.197297 7.353383 3.275809 -18.314974 -6.661646 48.978890 0.000004 0.000000 0.436111 0.113E+04 lgRho_cntr log_rel_run_E_err -7.6108996347350057 rel_E_err 1.9704240432034187D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1772 0.97913516291275815 9.2521126017408618E+049 k, q, energy_removed_layers after adjustment is 1777 0.97828363890540460 9.2602486646098326E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9654.5507812500000 max vel inside fraction of cutoff 3157.0059591503905 max c/cs inside fraction of cutoff 4.1931088191976738 average v/vesc outside cutoff 1.9124248177196845 Kinetic plus potential energy outside cutoff 9.2602486646098326E+049 mass inside cutoff 1777 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010332125602906 check gamma integral 4.6856255418085982E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 8.820312 6.423E+04 -23.793233 3.223279 51.678740 0.000000 0.000000 0.000000 0.213409 -3.162457 2740 208 -7.2264E+00 8.820242 1.581048 -12.551018 6.373074 -99.000000 51.678740 0.000000 0.048232 0.786591 0.593230 6 2.8821E+05 4.142224 7.347822 3.223279 -20.279487 -6.683142 48.978890 0.000004 0.000000 0.436111 0.114E+04 max increase log_rel_run_E_err -7.6064814306235906 rel_E_err 2.1212905936155903D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile25.data for model 3900 save photos/x900 for model 3900 k, q, energy_removed_layers before adjustment is 1774 0.97913516291275837 9.2555364374300307E+049 k, q, energy_removed_layers after adjustment is 1779 0.97828363890540482 9.2637110612427619E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9671.3984375000000 max vel inside fraction of cutoff 2966.9695723753475 max c/cs inside fraction of cutoff 4.1045916010640715 average v/vesc outside cutoff 1.9208791091391415 Kinetic plus potential energy outside cutoff 9.2637110612427619E+049 mass inside cutoff 1779 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010338211901784 check gamma integral 4.7366505440774968E-002 3910 8.799864 6.353E+04 -24.061368 3.168567 51.678740 0.000000 0.000000 0.000000 0.213409 -3.215703 2751 208 -7.2384E+00 8.799799 1.587377 -13.664817 6.051495 -99.000000 51.678740 0.000000 0.048232 0.786591 0.595085 6 2.8821E+05 4.084962 7.341472 3.168567 -22.418201 -6.707487 48.978890 0.000004 0.000000 0.436111 0.115E+04 lgRho_cntr log_rel_run_E_err -7.6051970714936141 rel_E_err 1.7978135749639979D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1782 0.97913516291275859 9.2593364512621945E+049 k, q, energy_removed_layers after adjustment is 1787 0.97828363890540504 9.2675523049215021E+049 Layers above q= 0.97828363890540504 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9690.8613281250000 max vel inside fraction of cutoff 2761.3504113457279 max c/cs inside fraction of cutoff 3.9783071732540352 average v/vesc outside cutoff 1.9305720931127963 Kinetic plus potential energy outside cutoff 9.2675523049215021E+049 mass inside cutoff 1787 50.556465756412877 relax counter 0 log max v [km/s]= 4.3010335398293824 check gamma integral 4.7894774810445871E-002 3920 8.779243 6.276E+04 -24.345091 3.113389 51.678740 0.000000 0.000000 0.000000 0.213409 -3.269538 2756 208 -7.1264E+00 8.779183 1.594475 -14.911967 5.763304 -99.000000 51.678740 0.000000 0.048232 0.786591 0.596999 6 2.8821E+05 4.027300 7.334309 3.113389 -24.675118 -6.734626 48.978890 0.000004 0.000000 0.436111 0.115E+04 lgRho_cntr log_rel_run_E_err -7.6041976857828182 rel_E_err 1.6940088388156660D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1783 0.97913516291275859 9.2634802841908056E+049 k, q, energy_removed_layers after adjustment is 1789 0.97814204549000305 9.2717447527991413E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9713.0273437500000 max vel inside fraction of cutoff 2551.5311996059354 max c/cs inside fraction of cutoff 3.8334019779236201 average v/vesc outside cutoff 1.9351083850047250 Kinetic plus potential energy outside cutoff 9.2717447527991413E+049 mass inside cutoff 1789 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010343073329524 check gamma integral 4.8422650639369014E-002 3930 8.759563 6.194E+04 -24.631287 3.060740 51.678740 0.000000 0.000000 0.000000 0.213409 -3.321022 2752 208 -7.0628E+00 8.759511 1.602069 -16.264157 5.528233 -99.000000 51.678740 0.000000 0.048232 0.786591 0.598870 6 2.8821E+05 3.972358 7.326582 3.060740 -26.925348 -6.763484 48.978890 0.000004 0.000000 0.436111 0.116E+04 max increase log_rel_run_E_err -7.6038842384794432 rel_E_err 1.6895921968711180D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1780 0.97913516291275882 9.2677799735436085E+049 k, q, energy_removed_layers after adjustment is 1786 0.97814204549000328 9.2760922704876728E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9737.1445312500000 max vel inside fraction of cutoff 2350.2919807049343 max c/cs inside fraction of cutoff 3.6282958372843490 average v/vesc outside cutoff 1.9468531818227615 Kinetic plus potential energy outside cutoff 9.2760922704876728E+049 mass inside cutoff 1786 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010346848754635 check gamma integral 4.8915748409307513E-002 3940 8.739701 6.096E+04 -24.937755 3.007583 51.678740 0.000000 0.000000 0.000000 0.213409 -3.373076 2755 208 -7.0650E+00 8.739664 1.611182 -17.846848 5.324516 -99.000000 51.678740 0.000000 0.048232 0.786591 0.600798 6 2.8821E+05 3.917007 7.317215 3.007583 -29.298730 -6.797898 48.978890 0.000004 0.000000 0.436111 0.117E+04 min_dr_div_cs log_rel_run_E_err -7.6034784251465242 rel_E_err 1.5966613185089574D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1778 0.97897340140057998 9.2754592658242036E+049 k, q, energy_removed_layers after adjustment is 1783 0.97814204549000328 9.2811233553579010E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9766.6523437500000 max vel inside fraction of cutoff 2162.7179885401220 max c/cs inside fraction of cutoff 3.5000174977559828 average v/vesc outside cutoff 1.9610831401332318 Kinetic plus potential energy outside cutoff 9.2811233553579010E+049 mass inside cutoff 1783 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010343509724738 check gamma integral 4.9414569233305922E-002 3950 8.722260 5.987E+04 -25.246171 2.960883 51.678740 0.000000 0.000000 0.000000 0.213409 -3.418837 2763 208 -7.0088E+00 8.722240 1.621516 -19.503429 5.164223 -99.000000 51.678740 0.000000 0.048232 0.786591 0.602530 6 2.8821E+05 3.868484 7.306451 2.960883 -31.473230 -6.836629 48.978890 0.000004 0.000000 0.436111 0.119E+04 min_dr_div_cs log_rel_run_E_err -7.6022417410882355 rel_E_err 1.4906485113504642D-12 Using fixed_vsurf 20000.000000000000 save photos/x950 for model 3950 k, q, energy_removed_layers before adjustment is 1776 0.97897340140057976 9.2808861485214761E+049 k, q, energy_removed_layers after adjustment is 1781 0.97814204549000305 9.2865911665190803E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9800.8691406250000 max vel inside fraction of cutoff 1927.8338857772083 max c/cs inside fraction of cutoff 3.2972222673498406 average v/vesc outside cutoff 1.9773963096608986 Kinetic plus potential energy outside cutoff 9.2865911665190803E+049 mass inside cutoff 1781 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010345651599540 check gamma integral 4.9866971653006936E-002 3960 8.709040 5.876E+04 -25.513915 2.925496 51.678740 0.000000 0.000000 0.000000 0.213409 -3.453528 2756 208 -6.9254E+00 8.709037 1.632128 -20.915772 5.051229 -99.000000 51.678740 0.000000 0.048232 0.786591 0.603870 6 2.8821E+05 3.831770 7.295207 2.925496 -33.178348 -6.876055 48.978890 0.000004 0.000000 0.436111 0.120E+04 min_dr_div_cs log_rel_run_E_err -7.6019301458471045 rel_E_err 1.4068909804204560D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1779 0.97897340140057976 9.2862116061843047E+049 k, q, energy_removed_layers after adjustment is 1784 0.97814204549000305 9.2919520125001375E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9836.8652343750000 max vel inside fraction of cutoff 1734.6092229754170 max c/cs inside fraction of cutoff 3.1028534869580655 average v/vesc outside cutoff 1.9943429209596095 Kinetic plus potential energy outside cutoff 9.2919520125001375E+049 mass inside cutoff 1784 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010350840472578 check gamma integral 5.0216740580848240E-002 3970 8.698379 5.723E+04 -25.804285 2.896854 51.678740 0.000000 0.000000 0.000000 0.213409 -3.481549 2747 208 -6.7317E+00 8.698379 1.646995 -22.562827 4.962920 -99.000000 51.678740 0.000000 0.048232 0.786591 0.604968 6 2.8821E+05 3.802161 7.279188 2.896854 -34.596472 -6.930646 48.987684 0.000004 0.000000 0.436111 0.122E+04 max increase log_rel_run_E_err -7.6003251096889333 rel_E_err 1.0674432011778111D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1775 0.97897340140057976 9.2932760599205712E+049 k, q, energy_removed_layers after adjustment is 1780 0.97814204549000305 9.2990553885847918E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9888.7929687500000 max vel inside fraction of cutoff 1648.2806779228808 max c/cs inside fraction of cutoff 2.8666229434070378 average v/vesc outside cutoff 2.0184379507029870 Kinetic plus potential energy outside cutoff 9.2990553885847918E+049 mass inside cutoff 1780 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010370210483870 check gamma integral 5.0518493252646998E-002 3980 8.697182 5.554E+04 -25.996705 2.893467 51.678740 0.000000 0.000000 0.000000 0.213409 -3.484695 2740 208 -6.6751E+00 8.697182 1.663793 -24.162089 4.951723 -99.000000 51.678740 0.000000 0.048232 0.786591 0.605092 6 2.8821E+05 3.798839 7.260854 2.893467 -34.767989 -6.991533 48.987684 0.000004 0.000000 0.436111 0.125E+04 max increase log_rel_run_E_err -7.5999612635743157 rel_E_err 4.8244769575984095D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1776 0.97897340140057976 9.3007288609386429E+049 k, q, energy_removed_layers after adjustment is 1781 0.97814204549000305 9.3065387912228808E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -9949.6464843750000 max vel inside fraction of cutoff 1654.2426343756104 max c/cs inside fraction of cutoff 2.8064007902904917 average v/vesc outside cutoff 2.0461539870761936 Kinetic plus potential energy outside cutoff 9.3065387912228808E+049 mass inside cutoff 1781 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010370983129453 check gamma integral 5.0604167781981027E-002 3990 8.708891 5.376E+04 -26.003390 2.924490 51.678740 0.000000 0.000000 0.000000 0.213409 -3.454078 2744 208 -6.6852E+00 8.708891 1.682106 -25.497561 5.045530 -99.000000 51.678740 0.000000 0.048232 0.786591 0.603852 6 2.8821E+05 3.831292 7.240719 2.924490 -33.229156 -7.057204 48.987684 0.000004 0.000000 0.436111 0.128E+04 min_dr_div_cs log_rel_run_E_err -7.5970558472899841 rel_E_err 1.2733549738434838D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1771 0.97881077281471940 9.3104678233606440E+049 k, q, energy_removed_layers after adjustment is 1775 0.97814204549000328 9.3140971040536247E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10018.726562500000 max vel inside fraction of cutoff 1659.1448696701532 max c/cs inside fraction of cutoff 2.7356467181044124 average v/vesc outside cutoff 2.0769851958628367 Kinetic plus potential energy outside cutoff 9.3140971040536247E+049 mass inside cutoff 1775 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010361616043458 check gamma integral 5.0377468567322121E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 8.730579 5.222E+04 -25.798778 2.982127 51.678740 0.000000 0.000000 0.000000 0.213409 -3.397566 2741 208 -6.8196E+00 8.730579 1.698326 -26.073622 5.231995 -99.000000 51.678740 0.000000 0.048232 0.786591 0.601570 6 2.8821E+05 3.891424 7.222616 2.982127 -30.469247 -7.114726 48.987684 0.000004 0.000000 0.436111 0.131E+04 lgRho_cntr log_rel_run_E_err -7.5966760054441389 rel_E_err 1.3880334305895335D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile26.data for model 4000 save photos/4000 for model 4000 k, q, energy_removed_layers before adjustment is 1765 0.97881077281471918 9.3166797595429315E+049 k, q, energy_removed_layers after adjustment is 1769 0.97814204549000305 9.3203124381985053E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10082.394531250000 max vel inside fraction of cutoff 1648.7122545980835 max c/cs inside fraction of cutoff 2.6683532924291771 average v/vesc outside cutoff 2.1048389289764171 Kinetic plus potential energy outside cutoff 9.3203124381985053E+049 mass inside cutoff 1769 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010341246341799 check gamma integral 4.9873368046043469E-002 4010 8.749713 5.127E+04 -25.549733 3.033049 51.678740 0.000000 0.000000 0.000000 0.213409 -3.347767 2742 208 -6.9352E+00 8.749713 1.708416 -25.960679 5.415610 -99.000000 51.678740 0.000000 0.048232 0.786591 0.599607 5 2.8821E+05 3.944568 7.211129 3.033049 -28.138555 -7.150202 48.987684 0.000004 0.000000 0.436111 0.133E+04 lgRho_cntr log_rel_run_E_err -7.5857615073197948 rel_E_err 5.7039852392065111D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1762 0.97881077281471918 9.3203352317940429E+049 k, q, energy_removed_layers after adjustment is 1766 0.97814204549000305 9.3239666250199150E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10123.212890625000 max vel inside fraction of cutoff 1675.1128127315992 max c/cs inside fraction of cutoff 2.6242317567146967 average v/vesc outside cutoff 2.1224198790635627 Kinetic plus potential energy outside cutoff 9.3239666250199150E+049 mass inside cutoff 1766 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010329905156217 check gamma integral 4.9400430607929563E-002 4020 8.768414 5.053E+04 -25.271881 3.082852 51.678740 0.000000 0.000000 0.000000 0.213409 -3.299183 2742 208 -7.0072E+00 8.768414 1.716479 -25.578055 5.621114 -99.000000 51.678740 0.000000 0.048232 0.786591 0.597728 5 2.8821E+05 3.996581 7.201803 3.082852 -25.952248 -7.178400 48.987684 0.000004 0.000000 0.436111 0.134E+04 lgRho_cntr log_rel_run_E_err -7.5805971237580048 rel_E_err 1.8206005240218780D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1760 0.97881077281471940 9.3231494037065640E+049 k, q, energy_removed_layers after adjustment is 1764 0.97814204549000328 9.3267780406561222E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10156.523437500000 max vel inside fraction of cutoff 1680.1664460035495 max c/cs inside fraction of cutoff 2.5876871317450050 average v/vesc outside cutoff 2.1366189205663439 Kinetic plus potential energy outside cutoff 9.3267780406561222E+049 mass inside cutoff 1764 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010324175238761 check gamma integral 4.8924139281209852E-002 4030 8.786860 4.990E+04 -24.978922 3.131999 51.678740 0.000000 0.000000 0.000000 0.213409 -3.251360 2742 208 -7.0566E+00 8.786860 1.723394 -24.920150 5.855878 -99.000000 51.678740 0.000000 0.048232 0.786591 0.595911 5 2.8821E+05 4.047953 7.193752 3.131999 -23.881101 -7.202491 48.987684 0.000004 0.000000 0.436111 0.135E+04 lgRho_cntr log_rel_run_E_err -7.5786875523818136 rel_E_err 8.1389397064870516D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1759 0.97881077281471940 9.3254899835736787E+049 k, q, energy_removed_layers after adjustment is 1763 0.97814204549000328 9.3291151145754335E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10185.589843750000 max vel inside fraction of cutoff 1683.0076907327507 max c/cs inside fraction of cutoff 2.5554140743039175 average v/vesc outside cutoff 2.1489043798880254 Kinetic plus potential energy outside cutoff 9.3291151145754335E+049 mass inside cutoff 1763 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010320700265732 check gamma integral 4.8443294064013945E-002 4040 8.805114 4.933E+04 -24.681880 3.180659 51.678740 0.000000 0.000000 0.000000 0.213409 -3.204136 2746 208 -7.0896E+00 8.805114 1.729605 -23.768465 6.120858 -99.000000 51.678740 0.000000 0.048232 0.786591 0.594150 5 2.8821E+05 4.098859 7.186497 3.180659 -21.911454 -7.224048 48.987684 0.000004 0.000000 0.436111 0.137E+04 lgRho_cntr log_rel_run_E_err -7.5777021268647440 rel_E_err 4.8970242995041748D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1757 0.97881077281471940 9.3275343806423336E+049 k, q, energy_removed_layers after adjustment is 1761 0.97814204549000328 9.3311555184123437E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10212.087890625000 max vel inside fraction of cutoff 1684.8188828838265 max c/cs inside fraction of cutoff 2.5256854509448603 average v/vesc outside cutoff 2.1600211959497941 Kinetic plus potential energy outside cutoff 9.3311555184123437E+049 mass inside cutoff 1761 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010318470749782 check gamma integral 4.7956115454925369E-002 4050 8.823211 4.882E+04 -24.389501 3.228924 51.678740 0.000000 0.000000 0.000000 0.213409 -3.157421 2746 208 -7.1097E+00 8.823211 1.735377 -22.237908 6.410364 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592441 5 2.8821E+05 4.149396 7.179735 3.228924 -20.034190 -7.244014 48.987684 0.000004 0.000000 0.436111 0.138E+04 lgRho_cntr log_rel_run_E_err -7.5770319184093520 rel_E_err 3.6148348429863532D-12 Using fixed_vsurf 20000.000000000000 save photos/x050 for model 4050 k, q, energy_removed_layers before adjustment is 1754 0.97881077281471940 9.3293891701627565E+049 k, q, energy_removed_layers after adjustment is 1758 0.97814204549000328 9.3330059145898681E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10237.060546875000 max vel inside fraction of cutoff 1683.1578786017085 max c/cs inside fraction of cutoff 2.4974106986542126 average v/vesc outside cutoff 2.1704273288495233 Kinetic plus potential energy outside cutoff 9.3330059145898681E+049 mass inside cutoff 1758 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010317014893280 check gamma integral 4.7461556948042764E-002 4060 8.841151 4.832E+04 -24.107439 3.276801 51.678740 0.000000 0.000000 0.000000 0.213409 -3.111216 2741 208 -7.1174E+00 8.841151 1.740902 -20.601011 6.714829 -99.000000 51.678740 0.000000 0.048232 0.786591 0.590782 5 2.8821E+05 4.199564 7.173170 3.276801 -18.244432 -7.263051 48.987684 0.000004 0.000000 0.436111 0.139E+04 lgRho_cntr log_rel_run_E_err -7.5764872323256212 rel_E_err 3.1793965166675992D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1749 0.97881077281471940 9.3311174595507358E+049 k, q, energy_removed_layers after adjustment is 1753 0.97814204549000328 9.3347294138208581E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10261.273437500000 max vel inside fraction of cutoff 1677.3925467830086 max c/cs inside fraction of cutoff 2.4697573615718373 average v/vesc outside cutoff 2.1804489018545015 Kinetic plus potential energy outside cutoff 9.3347294138208581E+049 mass inside cutoff 1753 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010316145298875 check gamma integral 4.6959783781371979E-002 4070 8.861785 4.776E+04 -23.794880 3.336432 51.678740 0.000000 0.000000 0.000000 0.213409 -3.058240 2740 208 -6.9495E+00 8.861785 1.747284 -18.717308 7.075110 -99.000000 51.678740 0.000000 0.048232 0.786591 0.588913 5 2.8821E+05 4.257336 7.165616 3.336432 -16.270053 -7.284975 48.987684 0.000004 0.000000 0.436111 0.140E+04 lgRho_cntr log_rel_run_E_err -7.5757878618275454 rel_E_err 3.6494935061560332D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1744 0.97881077281471962 9.3330691154359772E+049 k, q, energy_removed_layers after adjustment is 1748 0.97814204549000350 9.3366748578998992E+049 Layers above q= 0.97814204549000350 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10289.626953125000 max vel inside fraction of cutoff 1680.9177786350933 max c/cs inside fraction of cutoff 2.4370793933655945 average v/vesc outside cutoff 2.1921100334024408 Kinetic plus potential energy outside cutoff 9.3366748578998992E+049 mass inside cutoff 1748 50.549148387122010 relax counter 0 log max v [km/s]= 4.3010322634068157 check gamma integral 4.6367021447891760E-002 4080 8.881746 4.718E+04 -23.501855 3.394892 51.678740 0.000000 0.000000 0.000000 0.213409 -3.007099 2743 208 -6.9625E+00 8.881746 1.754005 -16.903615 7.424989 -99.000000 51.678740 0.000000 0.048232 0.786591 0.587156 5 2.8821E+05 4.313329 7.157597 3.394892 -14.441325 -7.307978 48.987684 0.000004 0.000000 0.436111 0.142E+04 max increase log_rel_run_E_err -7.5753351361310868 rel_E_err 4.6449038750345574D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1741 0.97881077281471962 9.3350682785300008E+049 k, q, energy_removed_layers after adjustment is 1745 0.97814204549000350 9.3386667383029242E+049 Layers above q= 0.97814204549000350 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10319.945312500000 max vel inside fraction of cutoff 1690.0699272849063 max c/cs inside fraction of cutoff 2.4017929445145940 average v/vesc outside cutoff 2.2044869667520710 Kinetic plus potential energy outside cutoff 9.3386667383029242E+049 mass inside cutoff 1745 50.549148387122010 relax counter 0 log max v [km/s]= 4.3010321072833753 check gamma integral 4.5773232440760404E-002 4090 8.901039 4.640E+04 -23.212224 3.452049 51.678740 0.000000 0.000000 0.000000 0.213409 -2.957755 2745 208 -6.7372E+00 8.901039 1.763045 -14.948127 7.759393 -99.000000 51.678740 0.000000 0.048232 0.786591 0.585511 5 2.8821E+05 4.367550 7.146748 3.452049 -12.744717 -7.338810 48.987684 0.000004 0.000000 0.436111 0.144E+04 lgRho_cntr log_rel_run_E_err -7.5728509217210158 rel_E_err 5.3091403047423276D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1743 0.97864857776569991 9.3395526713641098E+049 k, q, energy_removed_layers after adjustment is 1746 0.97814204549000350 9.3412399594182689E+049 Layers above q= 0.97814204549000350 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10361.466796875000 max vel inside fraction of cutoff 1812.2493554739442 max c/cs inside fraction of cutoff 2.3528981427645763 average v/vesc outside cutoff 2.2212758824989787 Kinetic plus potential energy outside cutoff 9.3412399594182689E+049 mass inside cutoff 1746 50.549148387122010 relax counter 0 log max v [km/s]= 4.3010332939059763 check gamma integral 4.5164218661824539E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 8.893114 4.477E+04 -23.197622 3.428828 51.678740 0.000000 0.000000 0.000000 0.213409 -2.978347 2734 208 -6.6498E+00 8.893114 1.782425 -13.645603 7.627540 -99.000000 51.678740 0.000000 0.048232 0.786591 0.586117 5 2.8821E+05 4.345123 7.123337 3.428828 -13.414920 -7.404839 48.987684 0.000004 0.000000 0.436111 0.148E+04 lgRho_cntr log_rel_run_E_err -7.5703231981058874 rel_E_err 3.0364694770683409D-11 Using fixed_vsurf 20000.000000000000 save LOGS/profile27.data for model 4100 save photos/x100 for model 4100 k, q, energy_removed_layers before adjustment is 1734 0.97864857776569969 9.3447660611693722E+049 k, q, energy_removed_layers after adjustment is 1737 0.97814204549000328 9.3464319675830340E+049 Layers above q= 0.97814204549000328 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10453.455078125000 max vel inside fraction of cutoff 1960.4399358104781 max c/cs inside fraction of cutoff 2.2422283875607354 average v/vesc outside cutoff 2.2579058656060025 Kinetic plus potential energy outside cutoff 9.3464319675830340E+049 mass inside cutoff 1737 50.549148387122003 relax counter 0 log max v [km/s]= 4.3010335481710849 check gamma integral 4.5330912999625154E-002 4110 8.872757 4.406E+04 -23.427590 3.369269 51.678740 0.000000 0.000000 0.000000 0.213409 -3.030947 2729 208 -6.9713E+00 8.872751 1.790947 -14.258319 7.275168 -99.000000 51.678740 0.000000 0.048232 0.786591 0.587784 5 2.8821E+05 4.287736 7.112822 3.369269 -15.226320 -7.433850 48.987684 0.000004 0.000000 0.436111 0.150E+04 lgRho_cntr log_rel_run_E_err -7.5697018923749226 rel_E_err 2.8387641219352602D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1731 0.97864857776569947 9.3469324491690995E+049 k, q, energy_removed_layers after adjustment is 1734 0.97814204549000305 9.3485879349835944E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10495.220703125000 max vel inside fraction of cutoff 1970.2880602975274 max c/cs inside fraction of cutoff 2.1910725364804846 average v/vesc outside cutoff 2.2742688510205573 Kinetic plus potential energy outside cutoff 9.3485879349835944E+049 mass inside cutoff 1734 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010316453048754 check gamma integral 4.5911249444174337E-002 4120 8.854521 4.355E+04 -23.648358 3.315210 51.678740 0.000000 0.000000 0.000000 0.213409 -3.078145 2730 208 -7.0251E+00 8.854507 1.797185 -15.092376 6.956404 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589327 5 2.8821E+05 4.236419 7.105170 3.315210 -16.920968 -7.455071 48.987684 0.000004 0.000000 0.436111 0.151E+04 lgRho_cntr log_rel_run_E_err -7.5691943365978736 rel_E_err 3.5426371452344500D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1734 0.97864857776569925 9.3484717616478123E+049 k, q, energy_removed_layers after adjustment is 1737 0.97814204549000283 9.3501192434567623E+049 Layers above q= 0.97814204549000283 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10526.318359375000 max vel inside fraction of cutoff 1896.3026796903384 max c/cs inside fraction of cutoff 2.1526135112380325 average v/vesc outside cutoff 2.2863515282879900 Kinetic plus potential energy outside cutoff 9.3501192434567623E+049 mass inside cutoff 1737 50.549148387121974 relax counter 0 log max v [km/s]= 4.3010314041379711 check gamma integral 4.6422822158443504E-002 4130 8.835211 4.305E+04 -23.895676 3.261204 51.678740 0.000000 0.000000 0.000000 0.213409 -3.128242 2729 208 -6.9533E+00 8.835193 1.803470 -16.239311 6.622141 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591000 5 2.8821E+05 4.182170 7.097435 3.261204 -18.791283 -7.476418 48.987684 0.000004 0.000000 0.436111 0.153E+04 lgRho_cntr log_rel_run_E_err -7.5678813327232302 rel_E_err 9.9962465569077602D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1735 0.97864857776569947 9.3499690858082794E+049 k, q, energy_removed_layers after adjustment is 1738 0.97814204549000305 9.3516081957348320E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10558.107421875000 max vel inside fraction of cutoff 1727.7829148223693 max c/cs inside fraction of cutoff 2.1129740945299722 average v/vesc outside cutoff 2.2986068642639323 Kinetic plus potential energy outside cutoff 9.3516081957348320E+049 mass inside cutoff 1738 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010315908981616 check gamma integral 4.6956163985213031E-002 4140 8.815594 4.253E+04 -24.169769 3.208709 51.678740 0.000000 0.000000 0.000000 0.213409 -3.179256 2726 208 -6.9969E+00 8.815576 1.810027 -17.591278 6.295543 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592740 5 2.8821E+05 4.127150 7.089340 3.208709 -20.774581 -7.498668 48.978890 0.000004 0.000000 0.436111 0.154E+04 lgRho_cntr log_rel_run_E_err -7.5669473959321145 rel_E_err 3.8426728375550805D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1733 0.97864857776569947 9.3514927714379390E+049 k, q, energy_removed_layers after adjustment is 1736 0.97814204549000305 9.3531228375907486E+049 Layers above q= 0.97814204549000305 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10591.761718750000 max vel inside fraction of cutoff 1678.0325125387994 max c/cs inside fraction of cutoff 2.0706598165181673 average v/vesc outside cutoff 2.3114910886556523 Kinetic plus potential energy outside cutoff 9.3531228375907486E+049 mass inside cutoff 1736 50.549148387121981 relax counter 0 log max v [km/s]= 4.3010313870423715 check gamma integral 4.7491360556244921E-002 4150 8.795023 4.193E+04 -24.480513 3.153648 51.678740 0.000000 0.000000 0.000000 0.213409 -3.232890 2727 208 -6.9081E+00 8.795010 1.817650 -19.220736 5.979798 -99.000000 51.678740 0.000000 0.048232 0.786591 0.594606 5 2.8821E+05 4.069546 7.079906 3.153648 -22.948866 -7.524555 48.981091 0.000004 0.000000 0.436111 0.156E+04 lgRho_cntr log_rel_run_E_err -7.5656609223824729 rel_E_err 4.8301021270895796D-12 Using fixed_vsurf 20000.000000000000 save photos/x150 for model 4150 k, q, energy_removed_layers before adjustment is 1733 0.97864857776569925 9.3532037865974600E+049 k, q, energy_removed_layers after adjustment is 1735 0.97828363890540482 9.3548262518339140E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10631.542968750000 max vel inside fraction of cutoff 1675.3361904229537 max c/cs inside fraction of cutoff 2.0201906233122466 average v/vesc outside cutoff 2.3355072375750336 Kinetic plus potential energy outside cutoff 9.3548262518339140E+049 mass inside cutoff 1735 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010316203350500 check gamma integral 4.8050641485612777E-002 4160 8.774871 4.122E+04 -24.811352 3.099698 51.678740 0.000000 0.000000 0.000000 0.213409 -3.285546 2726 208 -6.8021E+00 8.774868 1.826789 -21.118034 5.707297 -99.000000 51.678740 0.000000 0.048232 0.786591 0.596477 5 2.8821E+05 4.013214 7.068587 3.099698 -25.177412 -7.555676 48.981091 0.000004 0.000000 0.436111 0.159E+04 lgRho_cntr log_rel_run_E_err -7.5633121101397478 rel_E_err 9.9342479863205164D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1732 0.97864857776569925 9.3551810295897339E+049 k, q, energy_removed_layers after adjustment is 1734 0.97828363890540482 9.3567944670165104E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10680.152343750000 max vel inside fraction of cutoff 1669.7108406844470 max c/cs inside fraction of cutoff 1.9578643358908063 average v/vesc outside cutoff 2.3539125523120941 Kinetic plus potential energy outside cutoff 9.3567944670165104E+049 mass inside cutoff 1734 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010319478551997 check gamma integral 4.8603904514906870E-002 4170 8.755724 4.025E+04 -25.166672 3.048381 51.678740 0.000000 0.000000 0.000000 0.213409 -3.335696 2720 208 -6.5548E+00 8.755724 1.839488 -23.258181 5.484780 -99.000000 51.678740 0.000000 0.048232 0.786591 0.598297 5 2.8821E+05 3.959752 7.052856 3.048381 -27.391421 -7.599324 48.981091 0.000004 0.000000 0.436111 0.162E+04 max increase log_rel_run_E_err -7.5592853472133514 rel_E_err 2.8094289883861113D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1727 0.97864857776569925 9.3578216629203746E+049 k, q, energy_removed_layers after adjustment is 1729 0.97828363890540482 9.3594219897459511E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10749.419921875000 max vel inside fraction of cutoff 1671.6497842674592 max c/cs inside fraction of cutoff 1.9086439218229734 average v/vesc outside cutoff 2.3798372775449601 Kinetic plus potential energy outside cutoff 9.3594219897459511E+049 mass inside cutoff 1729 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010331331179472 check gamma integral 4.9134607620627879E-002 4180 8.762321 3.777E+04 -25.248663 3.065510 51.678740 0.000000 0.000000 0.000000 0.213409 -3.318910 2688 208 -6.0766E+00 8.762321 1.873925 -25.227548 5.554923 -99.000000 51.678740 0.000000 0.048232 0.786591 0.597566 6 2.8821E+05 3.977949 7.011000 3.065510 -26.637034 -7.722979 48.981091 0.000004 0.000000 0.436111 0.170E+04 lgRho_cntr log_rel_run_E_err -7.5524155836562761 rel_E_err 1.5000000721134984D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1709 0.97864857776569902 9.3642535194745325E+049 k, q, energy_removed_layers after adjustment is 1711 0.97828363890540460 9.3658158258544343E+049 Layers above q= 0.97828363890540460 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10947.783203125000 max vel inside fraction of cutoff 1651.6400788830128 max c/cs inside fraction of cutoff 2.0599196135142011 average v/vesc outside cutoff 2.4521887558343947 Kinetic plus potential energy outside cutoff 9.3658158258544343E+049 mass inside cutoff 1711 50.556465756412848 relax counter 0 log max v [km/s]= 4.3010372617660231 check gamma integral 4.9043791922061319E-002 4190 8.791221 3.663E+04 -24.830061 3.142401 51.678740 0.000000 0.000000 0.000000 0.213409 -3.244173 2669 208 -6.7475E+00 8.791221 1.890704 -23.973554 5.920941 -99.000000 51.678740 0.000000 0.048232 0.786591 0.594683 5 2.8821E+05 4.058348 6.991349 3.142401 -23.388885 -7.788369 48.981091 0.000004 0.000000 0.436111 0.173E+04 lgRho_cntr log_rel_run_E_err -7.5510177627092228 rel_E_err 1.6763507202634172D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1702 0.97864857776569925 9.3670180628865007E+049 k, q, energy_removed_layers after adjustment is 1704 0.97828363890540482 9.3685608798808444E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11050.283203125000 max vel inside fraction of cutoff 1628.0318056689953 max c/cs inside fraction of cutoff 2.2947448887514450 average v/vesc outside cutoff 2.4884893348391866 Kinetic plus potential energy outside cutoff 9.3685608798808444E+049 mass inside cutoff 1704 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010315477002550 check gamma integral 4.8298176717150969E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4200 8.809660 3.609E+04 -24.542511 3.191582 51.678740 0.000000 0.000000 0.000000 0.213409 -3.196471 2669 208 -6.8080E+00 8.809660 1.898894 -22.563293 6.196310 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592921 5 2.8821E+05 4.109798 6.981911 3.191582 -21.419206 -7.821556 48.981091 0.000004 0.000000 0.436111 0.174E+04 lgRho_cntr log_rel_run_E_err -7.5507533339779229 rel_E_err 1.6632688572170272D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile28.data for model 4200 save photos/x200 for model 4200 k, q, energy_removed_layers before adjustment is 1701 0.97846678914250507 9.3694949290802925E+049 k, q, energy_removed_layers after adjustment is 1702 0.97828363890540482 9.3698475581048690E+049 Layers above q= 0.97828363890540482 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11101.771484375000 max vel inside fraction of cutoff 1635.1314629536507 max c/cs inside fraction of cutoff 2.3938895118391152 average v/vesc outside cutoff 2.5064705068279882 Kinetic plus potential energy outside cutoff 9.3698475581048690E+049 mass inside cutoff 1702 50.556465756412862 relax counter 0 log max v [km/s]= 4.3010313106860476 check gamma integral 4.7803308707016691E-002 4210 8.829165 3.555E+04 -24.238094 3.243649 51.678740 0.000000 0.000000 0.000000 0.213409 -3.146147 2670 208 -6.7857E+00 8.829165 1.907226 -20.817296 6.515203 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591094 5 2.8821E+05 4.164292 6.972524 3.243649 -19.418783 -7.856570 48.981091 0.000004 0.000000 0.436111 0.175E+04 lgRho_cntr log_rel_run_E_err -7.5504817201322352 rel_E_err 1.7373430243284585D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1698 0.97846678914250529 9.3707646763068200E+049 k, q, energy_removed_layers after adjustment is 1699 0.97828363890540504 9.3711125288128036E+049 Layers above q= 0.97828363890540504 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11155.152343750000 max vel inside fraction of cutoff 1662.1734677300365 max c/cs inside fraction of cutoff 2.4409318334929222 average v/vesc outside cutoff 2.5249407846584591 Kinetic plus potential energy outside cutoff 9.3711125288128036E+049 mass inside cutoff 1699 50.556465756412877 relax counter 0 log max v [km/s]= 4.3010313379442895 check gamma integral 4.7264569100094668E-002 4220 8.848890 3.492E+04 -23.926397 3.296902 51.678740 0.000000 0.000000 0.000000 0.213409 -3.095384 2671 208 -6.6574E+00 8.848890 1.917252 -18.856299 6.855136 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589290 5 2.8821E+05 4.219485 6.961517 3.296902 -17.478199 -7.900187 48.981091 0.000004 0.000000 0.436111 0.176E+04 lgRho_cntr log_rel_run_E_err -7.5501841994533496 rel_E_err 1.8669726853996176D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1701 0.97846678914250551 9.3721618989861133E+049 k, q, energy_removed_layers after adjustment is 1702 0.97828363890540526 9.3725039525273025E+049 Layers above q= 0.97828363890540526 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11220.765625000000 max vel inside fraction of cutoff 1646.4975752259400 max c/cs inside fraction of cutoff 2.4616737177749375 average v/vesc outside cutoff 2.5473901736414484 Kinetic plus potential energy outside cutoff 9.3725039525273025E+049 mass inside cutoff 1702 50.556465756412891 relax counter 0 log max v [km/s]= 4.3010317214536578 check gamma integral 4.6700512937198319E-002 4230 8.847465 3.351E+04 -23.854762 3.293006 51.678740 0.000000 0.000000 0.000000 0.213409 -3.099361 2680 208 -6.1538E+00 8.847465 1.940807 -17.486753 6.833222 -99.000000 51.678740 0.000000 0.048232 0.786591 0.589358 5 2.8821E+05 4.215361 6.936909 3.293006 -17.603499 -8.008810 48.981091 0.000004 0.000000 0.436111 0.178E+04 lgRho_cntr log_rel_run_E_err -7.5485242121935912 rel_E_err 2.2271673419512206D-11 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1697 0.97846678914250540 9.3752008115782274E+049 k, q, energy_removed_layers after adjustment is 1698 0.97828363890540515 9.3755291272533634E+049 Layers above q= 0.97828363890540515 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11381.003906250000 max vel inside fraction of cutoff 1648.7273912590861 max c/cs inside fraction of cutoff 2.5356976983993587 average v/vesc outside cutoff 2.6012488509421781 Kinetic plus potential energy outside cutoff 9.3755291272533634E+049 mass inside cutoff 1698 50.556465756412877 relax counter 0 log max v [km/s]= 4.3010347544844763 check gamma integral 4.6697083315369155E-002 4240 8.823650 3.274E+04 -24.161687 3.229071 51.678740 0.000000 0.000000 0.000000 0.213409 -3.161318 2678 208 -6.6753E+00 8.823650 1.954231 -18.749083 6.427649 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591421 5 2.8821E+05 4.148467 6.923661 3.229071 -19.955850 -8.073837 48.981091 0.000004 0.000000 0.436111 0.178E+04 lgRho_cntr log_rel_run_E_err -7.5481226121539073 rel_E_err 1.9007833687745574D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1687 0.97846678914250540 9.3769131931041865E+049 k, q, energy_removed_layers after adjustment is 1688 0.97828363890540515 9.3772336297882177E+049 Layers above q= 0.97828363890540515 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11476.287109375000 max vel inside fraction of cutoff 1623.5187818278500 max c/cs inside fraction of cutoff 2.5735935827138268 average v/vesc outside cutoff 2.6326550725468176 Kinetic plus potential energy outside cutoff 9.3772336297882177E+049 mass inside cutoff 1688 50.556465756412877 relax counter 0 log max v [km/s]= 4.3010314250944699 check gamma integral 4.7353537404902446E-002 4250 8.804190 3.217E+04 -24.444356 3.176982 51.678740 0.000000 0.000000 0.000000 0.213409 -3.212018 2674 208 -6.5677E+00 8.804190 1.964550 -20.246197 6.116475 -99.000000 51.678740 0.000000 0.048232 0.786591 0.593165 5 2.8821E+05 4.093925 6.913769 3.176982 -21.974097 -8.125367 48.981091 0.000004 0.000000 0.436111 0.178E+04 max increase log_rel_run_E_err -7.5478409406584976 rel_E_err 1.9412185338313127D-12 Using fixed_vsurf 20000.000000000000 save photos/x250 for model 4250 k, q, energy_removed_layers before adjustment is 1684 0.97846678914250518 9.3781441543541390E+049 k, q, energy_removed_layers after adjustment is 1685 0.97828363890540493 9.3784585211233585E+049 Layers above q= 0.97828363890540493 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11551.562500000000 max vel inside fraction of cutoff 1598.6887176775263 max c/cs inside fraction of cutoff 2.5884531764889447 average v/vesc outside cutoff 2.6571325891980369 Kinetic plus potential energy outside cutoff 9.3784585211233585E+049 mass inside cutoff 1685 50.556465756412869 relax counter 0 log max v [km/s]= 4.3010317251790200 check gamma integral 4.7894259295766135E-002 4260 8.785154 3.138E+04 -24.773795 3.125965 51.678740 0.000000 0.000000 0.000000 0.213409 -3.261733 2669 208 -6.3560E+00 8.785154 1.979406 -22.335916 5.841101 -99.000000 51.678740 0.000000 0.048232 0.786591 0.594910 5 2.8821E+05 4.040644 6.899933 3.125965 -24.037180 -8.201453 48.981091 0.000004 0.000000 0.436111 0.178E+04 lgRho_cntr log_rel_run_E_err -7.5474443333601906 rel_E_err 3.2689467677729483D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1680 0.97846678914250518 9.3797701030522285E+049 k, q, energy_removed_layers after adjustment is 1681 0.97828363890540493 9.3800757640263754E+049 Layers above q= 0.97828363890540493 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11663.121093750000 max vel inside fraction of cutoff 1580.2675268385569 max c/cs inside fraction of cutoff 2.6004922206520393 average v/vesc outside cutoff 2.6928825478144769 Kinetic plus potential energy outside cutoff 9.3800757640263754E+049 mass inside cutoff 1681 50.556465756412869 relax counter 0 log max v [km/s]= 4.3010325267716087 check gamma integral 4.8435846311523645E-002 4270 8.803532 2.948E+04 -24.591321 3.174723 51.678740 0.000000 0.000000 0.000000 0.213409 -3.214486 2654 208 -6.1378E+00 8.803532 2.016781 -22.448258 6.104296 -99.000000 51.678740 0.000000 0.048232 0.786591 0.593078 5 2.8821E+05 4.091760 6.866119 3.174723 -22.056671 -8.400041 48.981091 0.000004 0.000000 0.436111 0.176E+04 lgRho_cntr log_rel_run_E_err -7.5450649711451581 rel_E_err 3.1313319228779037D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1714 0.96999416222777146 9.2997016627275992E+049 k, q, energy_removed_layers after adjustment is 1754 0.95687779179823362 9.7745862543745910E+049 Layers above q= 0.95687779179823362 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11961.265625000000 max vel inside fraction of cutoff 1190.5445803608229 max c/cs inside fraction of cutoff 1.3527654748951956 average v/vesc outside cutoff 1.8096677403693580 Kinetic plus potential energy outside cutoff 9.7745862543745910E+049 mass inside cutoff 1754 49.450238550700227 relax counter 0 log max v [km/s]= 4.3010330106448684 check gamma integral 4.7992080322266990E-002 4280 8.823883 2.861E+04 -24.267934 3.229099 51.678740 0.000000 0.000000 0.000000 0.213409 -3.161940 2646 208 -6.2563E+00 8.823883 2.034494 -20.572105 6.429893 -99.000000 51.678740 0.000000 0.048232 0.786591 0.591161 5 2.8821E+05 4.148594 6.849531 3.229099 -19.943023 -8.494900 48.981091 0.000004 0.000000 0.436111 0.174E+04 max increase log_rel_run_E_err -7.5447794876547345 rel_E_err 2.0101959140633582D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1702 0.96966513846492197 9.4161078960558814E+049 k, q, energy_removed_layers after adjustment is 1740 0.95721313954634579 9.8418479785405609E+049 Layers above q= 0.95721313954634579 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12111.771484375000 max vel inside fraction of cutoff 1201.2472172590271 max c/cs inside fraction of cutoff 1.4367693706603315 average v/vesc outside cutoff 1.8513969746918639 Kinetic plus potential energy outside cutoff 9.8418479785405609E+049 mass inside cutoff 1740 49.467568899762284 relax counter 0 log max v [km/s]= 4.3010319623102493 check gamma integral 4.7430592729974193E-002 4290 8.811245 2.686E+04 -24.399253 3.195410 51.678740 0.000000 0.000000 0.000000 0.213409 -3.195023 2635 208 -6.1357E+00 8.811245 2.071335 -20.697853 6.226092 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592255 5 2.8821E+05 4.113089 6.813562 3.195410 -21.237036 -8.694361 48.981091 0.000004 0.000000 0.436111 0.165E+04 lgRho_cntr log_rel_run_E_err -7.5437972564948401 rel_E_err 1.8690136141754810D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1683 0.96888666788626143 9.6286575228795646E+049 k, q, energy_removed_layers after adjustment is 1718 0.95771674500212289 9.9565592852258780E+049 Layers above q= 0.95771674500212289 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12445.187500000000 max vel inside fraction of cutoff 1188.5931994703735 max c/cs inside fraction of cutoff 1.4832666919242736 average v/vesc outside cutoff 1.9366532472018960 Kinetic plus potential energy outside cutoff 9.9565592852258780E+049 mass inside cutoff 1718 49.493594595140593 relax counter 0 log max v [km/s]= 4.3010317447320912 check gamma integral 4.7770866662329325E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4300 8.805376 2.510E+04 -24.529656 3.179667 51.678740 0.000000 0.000000 0.000000 0.213409 -3.210408 2625 208 -5.6444E+00 8.805376 2.110226 -21.837570 6.133729 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592768 6 2.8821E+05 4.096611 6.773696 3.179667 -21.857214 -8.899296 48.981091 0.000004 0.000000 0.436111 0.153E+04 max increase log_rel_run_E_err -7.5427334269476853 rel_E_err 1.6350684888993230D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile29.data for model 4300 save photos/x300 for model 4300 k, q, energy_removed_layers before adjustment is 1672 0.96835111110122019 9.7963968189089935E+049 k, q, energy_removed_layers after adjustment is 1700 0.95947365954408437 1.0048321008217014E+050 Layers above q= 0.95947365954408437 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12829.228515625000 max vel inside fraction of cutoff 1179.4749942452220 max c/cs inside fraction of cutoff 1.6602020308813481 average v/vesc outside cutoff 2.0643533476301221 Kinetic plus potential energy outside cutoff 1.0048321008217014E+050 mass inside cutoff 1700 49.584389724840406 relax counter 0 log max v [km/s]= 4.3010331706804132 check gamma integral 4.7970104402349098E-002 4310 8.808961 2.165E+04 -24.468718 3.189480 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201235 2615 208 -5.2910E+00 8.808961 2.197853 -21.463245 6.189687 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592410 6 2.8821E+05 4.106578 6.691975 3.189480 -21.478723 -9.324544 48.981091 0.000004 0.000000 0.436111 0.139E+04 varcontrol log_rel_run_E_err -7.5418887914272776 rel_E_err 1.6979297898722525D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1655 0.96703143341936004 1.0067517856738978E+050 k, q, energy_removed_layers after adjustment is 1719 0.94503034701962174 1.0698352766481277E+050 Layers above q= 0.94503034701962174 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13831.591796875000 max vel inside fraction of cutoff 671.28970371183516 max c/cs inside fraction of cutoff 0.86214522339104682 average v/vesc outside cutoff 1.8598204049556268 Kinetic plus potential energy outside cutoff 1.0698352766481277E+050 mass inside cutoff 1719 48.837977533107157 relax counter 0 log max v [km/s]= 4.3010317754758454 check gamma integral 4.7903361954254743E-002 4320 8.809241 1.813E+04 -24.468871 3.190657 51.678740 0.000000 0.000000 0.000000 0.213409 -3.200508 2609 208 -5.2381E+00 8.809241 2.311764 -21.515893 6.194082 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592384 6 2.8821E+05 4.107362 6.612222 3.190657 -21.449282 -9.800080 48.981091 0.000004 0.000000 0.436111 0.125E+04 varcontrol log_rel_run_E_err -7.5416318606864179 rel_E_err 1.7113522772194989D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1650 0.95872167219858473 1.0696426628657498E+050 k, q, energy_removed_layers after adjustment is 1678 0.94911519360603103 1.0927781896765977E+050 Layers above q= 0.94911519360603103 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -15476.816406250000 max vel inside fraction of cutoff 638.49421824490651 max c/cs inside fraction of cutoff 1.0385177595894259 average v/vesc outside cutoff 2.2031772429414240 Kinetic plus potential energy outside cutoff 1.0927781896765977E+050 mass inside cutoff 1678 49.049077257515371 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.7933439536108569E-002 4330 8.809023 1.482E+04 -24.475479 3.190766 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201074 2573 208 -4.9786E+00 8.809023 2.450954 -21.590469 6.190655 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592404 6 2.8821E+05 4.106752 6.540319 3.190766 -21.472136 -10.306062 48.981091 0.000004 0.000000 0.436111 0.109E+04 min_dr_div_cs log_rel_run_E_err -7.5413747673464098 rel_E_err 1.6433946433873643D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1600 0.95721313954634413 1.0977671208545960E+050 k, q, energy_removed_layers after adjustment is 1630 0.94656481826032735 1.1137604490705078E+050 Layers above q= 0.94656481826032735 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -18171.041015625000 max vel inside fraction of cutoff 414.57979257251742 max c/cs inside fraction of cutoff 0.72092463081633062 average v/vesc outside cutoff 2.4446738064977165 Kinetic plus potential energy outside cutoff 1.1137604490705078E+050 mass inside cutoff 1630 48.917277073291366 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.7971847723240015E-002 4340 8.808869 1.297E+04 -24.480217 3.191613 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201475 2548 208 -4.7014E+00 8.808869 2.627662 -21.643888 6.188231 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592418 6 2.8821E+05 4.106321 6.662005 3.191613 -21.488325 -11.156566 48.981091 0.000004 0.000000 0.436111 0.545E+03 varcontrol log_rel_run_E_err -7.5411197794681000 rel_E_err 1.7076154888263990D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1554 0.95435701912200721 1.1202630720418574E+050 k, q, energy_removed_layers after adjustment is 1573 0.94741639718350401 1.1270941617630806E+050 Layers above q= 0.94741639718350401 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -23104.642578125000 max vel inside fraction of cutoff 316.49589910223608 max c/cs inside fraction of cutoff 0.68417953933787334 average v/vesc outside cutoff 2.9615756790616974 Kinetic plus potential energy outside cutoff 1.1270941617630806E+050 mass inside cutoff 1573 48.961285598995254 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8002590445253623E-002 max_abs_correction > tol_max_correction*coeff 4342 2.2557351036333266D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4342 max_abs_correction > tol_max_correction*coeff 4342 9.8270632820485742D-03 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4342 4350 8.808819 1.193E+04 -24.481576 3.192545 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201605 2507 210 -4.6351E+00 8.808819 2.736558 -21.661330 6.187442 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592423 5 2.8821E+05 4.106180 6.734186 3.192545 -21.493598 -16.269343 48.977746 0.000004 0.000000 0.436111 0.178E+01 max increase log_rel_run_E_err -7.5408236051142179 rel_E_err 2.2468628648553811D-12 Using fixed_vsurf 20000.000000000000 save photos/x350 for model 4350 k, q, energy_removed_layers before adjustment is 1487 0.95351561574185306 1.1270952891516095E+050 k, q, energy_removed_layers after adjustment is 1505 0.94775753296066367 1.1316561459269022E+050 Layers above q= 0.94775753296066367 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -27310.595703125000 max vel inside fraction of cutoff 242.19234027979701 max c/cs inside fraction of cutoff 0.57708476871780146 average v/vesc outside cutoff 3.3258163673001460 Kinetic plus potential energy outside cutoff 1.1316561459269022E+050 mass inside cutoff 1505 48.978915066105181 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8013834230968465E-002 4360 8.808796 8945.640 -24.482236 3.195723 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201665 2420 210 -4.2712E+00 8.808796 2.962393 -21.669351 6.187080 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592425 5 2.8821E+05 4.106115 6.685926 3.195723 -21.496023 -18.988975 48.977746 0.000004 0.000000 0.436111 0.138E+00 varcontrol log_rel_run_E_err -7.5405053706392442 rel_E_err 1.8379256196656705D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1358 0.95216457473675498 1.1349932482122309E+050 k, q, energy_removed_layers after adjustment is 1368 0.94886134526877208 1.1368302752000650E+050 Layers above q= 0.94886134526877208 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -40245.205078125000 max vel inside fraction of cutoff 98.155317191515678 max c/cs inside fraction of cutoff 0.28888570142615977 average v/vesc outside cutoff 4.2846032063647357 Kinetic plus potential energy outside cutoff 1.1368302752000650E+050 mass inside cutoff 1368 49.035958695311557 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8020809711452624E-002 4370 8.808836 6439.716 -24.479720 3.201156 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201559 2409 210 -4.0804E+00 8.808836 3.188184 -21.655311 6.187719 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592422 5 2.8821E+05 4.106229 6.566528 3.201156 -21.491758 -20.975447 48.981091 0.000004 0.000000 0.436111 0.271E-01 varcontrol log_rel_run_E_err -7.5402281187805045 rel_E_err 1.8182166106374168D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1333 0.95115042329108979 1.1388298917531272E+050 k, q, energy_removed_layers after adjustment is 1336 0.94945562277057682 1.1392506329690844E+050 Layers above q= 0.94945562277057682 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -61996.013671875000 max vel inside fraction of cutoff 77.306442216260166 max c/cs inside fraction of cutoff 0.24191147331077562 average v/vesc outside cutoff 5.5170555897201190 Kinetic plus potential energy outside cutoff 1.1392506329690844E+050 mass inside cutoff 1336 49.066670207775793 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8015910726054968E-002 retry: logT > hydro_mtx_max_allowed_logT 1172 4380 4380 8.808905 4485.940 -24.478988 3.208852 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201379 2502 211 -4.2346E+00 8.808905 3.390330 -21.631285 6.188809 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592415 5 2.8821E+05 4.106423 6.342767 3.208852 -21.484486 -21.986146 48.981091 0.000004 0.000000 0.436111 0.174E-01 retry log_rel_run_E_err -7.5399727314427771 rel_E_err 1.6627634102947375D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1342 0.95047336226077206 1.1396720088197398E+050 k, q, energy_removed_layers after adjustment is 1345 0.94945562277057849 1.1398205246591689E+050 Layers above q= 0.94945562277057849 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -93797.156250000000 max vel inside fraction of cutoff 52.151115139898977 max c/cs inside fraction of cutoff 0.13866311935486975 average v/vesc outside cutoff 6.8719283375773150 Kinetic plus potential energy outside cutoff 1.1398205246591689E+050 mass inside cutoff 1345 49.066670207775879 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8007424574428158E-002 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1116 4382 retry: logT < hydro_mtx_min_allowed_logT 1162 4385 retry: abs(dlogT) > hydro_mtx_max_allowed_abs_dlogT 1158 4387 retry: logT < hydro_mtx_min_allowed_logT 1162 4387 max_residual > tol_max_residual 4389 1.4888073250862626D-03 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4389 4.2664311242897619D-03 1.1569069869949667D-03 3.8563566233165558D-01 retry: max corr+resid -- give up in solver 4389 4390 8.808923 4251.358 -24.478531 3.211450 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201333 2502 216 -4.9479E+00 8.808923 3.443372 -21.625272 6.189083 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592414 5 2.8821E+05 4.106472 6.355548 3.211450 -21.482659 -22.221217 48.981091 0.000004 0.000000 0.436111 0.148E-01 max increase log_rel_run_E_err -7.5397078206891859 rel_E_err 1.6223282349406297D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1342 0.95047336226077206 1.1398102781458835E+050 k, q, energy_removed_layers after adjustment is 1344 0.94979415966273273 1.1399345545090176E+050 Layers above q= 0.94979415966273273 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -104897.83203125000 max vel inside fraction of cutoff 39.137143345803494 max c/cs inside fraction of cutoff 0.10261749526459671 average v/vesc outside cutoff 7.3285377266859859 Kinetic plus potential energy outside cutoff 1.1399345545090176E+050 mass inside cutoff 1344 49.084165367783491 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005316605349346E-002 retry: adjust_correction failed in eval_equations -- give up in solver 4394 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4400 8.808931 4175.320 -24.478291 3.212907 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201313 2478 217 -4.4571E+00 8.808931 3.470902 -21.622531 6.189208 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106494 6.379257 3.212907 -21.481828 -22.334573 48.977699 0.000004 0.000000 0.436111 0.135E-01 max increase log_rel_run_E_err -7.5394521648962094 rel_E_err 1.7060872425856147D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile30.data for model 4400 save photos/x400 for model 4400 k, q, energy_removed_layers before adjustment is 1266 0.95047336226077206 1.1397681746299406E+050 k, q, energy_removed_layers after adjustment is 1268 0.94979415966273273 1.1398845770912705E+050 Layers above q= 0.94979415966273273 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -111216.54882812500 max vel inside fraction of cutoff 29.124425880698347 max c/cs inside fraction of cutoff 7.5094943805396872E-002 average v/vesc outside cutoff 7.5527337284968112 Kinetic plus potential energy outside cutoff 1.1398845770912705E+050 mass inside cutoff 1268 49.084165367783491 relax counter 0 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8004381150245162E-002 4410 8.808943 4146.977 -24.477863 3.216758 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201280 2528 217 -4.2373E+00 8.808943 3.537580 -21.618233 6.189405 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592412 5 2.8821E+05 4.106529 6.500781 3.216758 -21.480518 -22.592984 48.979848 0.000004 0.000000 0.436111 0.101E-01 min_dr_div_cs log_rel_run_E_err -7.5391910758965244 rel_E_err 1.8151598415387546D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1298 0.95047336226077217 1.1398946223863605E+050 k, q, energy_removed_layers after adjustment is 1300 0.94979415966273284 1.1399981386670689E+050 Layers above q= 0.94979415966273284 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -128287.55859375000 max vel inside fraction of cutoff 7.7091610260237342 max c/cs inside fraction of cutoff 1.9427895038457398E-002 average v/vesc outside cutoff 8.1363639046347309 Kinetic plus potential energy outside cutoff 1.1399981386670689E+050 mass inside cutoff 1300 49.084165367783491 relax counter 6 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8003193961120828E-002 4420 8.808942 4011.886 -24.477491 3.220139 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201283 2541 217 -4.2252E+00 8.808942 3.590247 -21.618686 6.189386 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592412 5 2.8821E+05 4.106526 6.548581 3.220139 -21.480651 -22.785731 48.979848 0.000004 0.000000 0.436111 0.867E-02 max increase log_rel_run_E_err -7.5389269694266972 rel_E_err 1.7716666064560149D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1295 0.95047336226077239 1.1399064544958623E+050 k, q, energy_removed_layers after adjustment is 1300 0.94962468042430292 1.1400474662854409E+050 Layers above q= 0.94962468042430292 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -143751.49218750000 max vel inside fraction of cutoff 2.3856116226675019 max c/cs inside fraction of cutoff 5.8579675113148814E-003 average v/vesc outside cutoff 8.6019084380675643 Kinetic plus potential energy outside cutoff 1.1400474662854409E+050 mass inside cutoff 1300 49.075406894296513 relax counter 16 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8003754183756214E-002 4430 8.808938 3845.167 -24.477976 3.223955 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201293 2485 217 -4.2986E+00 8.808938 3.644080 -21.620051 6.189325 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592412 5 2.8821E+05 4.106515 6.582515 3.223955 -21.481060 -22.975612 48.985229 0.000004 0.000000 0.436111 0.759E-02 min_dr_div_cs log_rel_run_E_err -7.5386559836162892 rel_E_err 1.7375174771973694D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1225 0.95047336226077062 1.1399726656099178E+050 k, q, energy_removed_layers after adjustment is 1230 0.94962468042430115 1.1400975644914134E+050 Layers above q= 0.94962468042430115 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -161620.52734375000 max vel inside fraction of cutoff 6.4059649537871426 max c/cs inside fraction of cutoff 1.5839899241432736E-002 average v/vesc outside cutoff 9.1318050059159290 Kinetic plus potential energy outside cutoff 1.1400975644914134E+050 mass inside cutoff 1230 49.075406894296421 relax counter 26 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8004759575326648E-002 4440 8.808934 3692.153 -24.478188 3.226759 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201305 2509 217 -4.3736E+00 8.808934 3.680534 -21.621643 6.189254 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106502 6.584880 3.226759 -21.481539 -23.101070 48.985229 0.000004 0.000000 0.436111 0.712E-02 min_dr_div_cs log_rel_run_E_err -7.5383982538714776 rel_E_err 1.7193385230859947D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1235 0.95029928325695723 1.1400542190590534E+050 k, q, energy_removed_layers after adjustment is 1239 0.94962468042430048 1.1401233099299978E+050 Layers above q= 0.94962468042430048 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -175041.53515625000 max vel inside fraction of cutoff 5.6932110672893534 max c/cs inside fraction of cutoff 1.4159020279750884E-002 average v/vesc outside cutoff 9.5090792778652933 Kinetic plus potential energy outside cutoff 1.1401233099299978E+050 mass inside cutoff 1239 49.075406894296385 relax counter 36 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005633734462844E-002 4450 8.808931 3547.826 -24.478337 3.229357 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201312 2478 217 -4.3326E+00 8.808931 3.712246 -21.622578 6.189213 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106495 6.579034 3.229357 -21.481819 -23.208552 48.985229 0.000004 0.000000 0.436111 0.682E-02 min_dr_div_cs log_rel_run_E_err -7.5381421464444163 rel_E_err 1.7477108405019676D-12 Using fixed_vsurf 20000.000000000000 save photos/x450 for model 4450 k, q, energy_removed_layers before adjustment is 1186 0.95029928325695667 1.1400808935893518E+050 k, q, energy_removed_layers after adjustment is 1189 0.94979415966273006 1.1401437645088757E+050 Layers above q= 0.94979415966273006 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -187668.95703125000 max vel inside fraction of cutoff 1.8084996559837412 max c/cs inside fraction of cutoff 4.6095140099355180E-003 average v/vesc outside cutoff 9.8818795420787655 Kinetic plus potential energy outside cutoff 1.1401437645088757E+050 mass inside cutoff 1189 49.084165367783349 relax counter 46 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8006163380578337E-002 4460 8.808932 3429.154 -24.478299 3.231617 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201310 2508 217 -4.3690E+00 8.808932 3.738357 -21.622382 6.189223 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106497 6.572155 3.231617 -21.481756 -23.296059 48.985229 0.000004 0.000000 0.436111 0.660E-02 min_dr_div_cs log_rel_run_E_err -7.5378893146683517 rel_E_err 1.7341190650545665D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1191 0.95029928325695734 1.1401014052238402E+050 k, q, energy_removed_layers after adjustment is 1194 0.94979415966273073 1.1401605695000616E+050 Layers above q= 0.94979415966273073 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -198781.11132812500 max vel inside fraction of cutoff 3.3400047417797363 max c/cs inside fraction of cutoff 8.5044580236827722E-003 average v/vesc outside cutoff 10.174803298328037 Kinetic plus potential energy outside cutoff 1.1401605695000616E+050 mass inside cutoff 1194 49.084165367783378 relax counter 56 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8006173055061607E-002 4470 8.808934 3364.538 -24.478256 3.233449 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201304 2533 217 -4.6268E+00 8.808934 3.758631 -21.621560 6.189261 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106504 6.579658 3.233449 -21.481503 -23.363459 48.985229 0.000004 0.000000 0.436111 0.634E-02 min_dr_div_cs log_rel_run_E_err -7.5376358553667666 rel_E_err 1.5946350555768078D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1205 0.95029928325695756 1.1401172222833011E+050 k, q, energy_removed_layers after adjustment is 1208 0.94979415966273095 1.1401736977264055E+050 Layers above q= 0.94979415966273095 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -207882.22851562500 max vel inside fraction of cutoff 5.7866756429064603 max c/cs inside fraction of cutoff 1.4693385043068394E-002 average v/vesc outside cutoff 10.418136194516421 Kinetic plus potential energy outside cutoff 1.1401736977264055E+050 mass inside cutoff 1208 49.084165367783399 relax counter 66 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005887085660628E-002 4480 8.808937 3301.207 -24.478165 3.235019 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201296 2505 217 -4.7047E+00 8.808937 3.775427 -21.620578 6.189307 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592413 5 2.8821E+05 4.106512 6.580239 3.235019 -21.481203 -23.418967 48.985229 0.000004 0.000000 0.436111 0.618E-02 min_dr_div_cs log_rel_run_E_err -7.5373818996318720 rel_E_err 1.6833201331542978D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1169 0.95029928325695734 1.1401299981169737E+050 k, q, energy_removed_layers after adjustment is 1172 0.94979415966273073 1.1401843378166981E+050 Layers above q= 0.94979415966273073 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -215750.31054687500 max vel inside fraction of cutoff 6.3834719355236684 max c/cs inside fraction of cutoff 1.6157868040723417E-002 average v/vesc outside cutoff 10.615497938100063 Kinetic plus potential energy outside cutoff 1.1401843378166981E+050 mass inside cutoff 1172 49.084165367783378 relax counter 76 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005516233719757E-002 4490 8.808939 3252.979 -24.478082 3.236172 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201291 2519 217 -4.7683E+00 8.808939 3.787470 -21.619937 6.189336 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592412 5 2.8821E+05 4.106517 6.578759 3.236172 -21.481006 -23.458597 48.985229 0.000004 0.000000 0.436111 0.608E-02 min_dr_div_cs log_rel_run_E_err -7.5371323781965627 rel_E_err 1.6955524670332979D-12 Using fixed_vsurf 20000.000000000000 k, q, energy_removed_layers before adjustment is 1182 0.95029928325695801 1.1401386623844190E+050 k, q, energy_removed_layers after adjustment is 1185 0.94979415966273140 1.1401915093442770E+050 Layers above q= 0.94979415966273140 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -221582.14453125000 max vel inside fraction of cutoff 6.1345654335774249 max c/cs inside fraction of cutoff 1.5487621832255048E-002 average v/vesc outside cutoff 10.759925937403906 Kinetic plus potential energy outside cutoff 1.1401915093442770E+050 mass inside cutoff 1185 49.084165367783420 relax counter 86 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005254940063379E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4500 8.808940 3202.151 -24.478043 3.237362 51.678740 0.000000 0.000000 0.000000 0.213409 -3.201287 2529 217 -4.6878E+00 8.808940 3.799672 -21.619428 6.189360 -99.000000 51.678740 0.000000 0.048232 0.786591 0.592412 5 2.8821E+05 4.106521 6.575805 3.237362 -21.480850 -23.498612 48.985229 0.000004 0.000000 0.436111 0.599E-02 min_dr_div_cs log_rel_run_E_err -7.5368852386395062 rel_E_err 1.6187598030248266D-12 Using fixed_vsurf 20000.000000000000 save LOGS/profile31.data for model 4500 save photos/x500 for model 4500 k, q, energy_removed_layers before adjustment is 1188 0.95029928325695845 1.1401462472107165E+050 k, q, energy_removed_layers after adjustment is 1191 0.94979415966273184 1.1401976103705275E+050 Layers above q= 0.94979415966273184 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -227658.17187500000 max vel inside fraction of cutoff 5.2614895053526292 max c/cs inside fraction of cutoff 1.3247903554741560E-002 average v/vesc outside cutoff 10.907032947115301 Kinetic plus potential energy outside cutoff 1.1401976103705275E+050 mass inside cutoff 1191 49.084165367783449 relax counter 96 log max v [km/s]= 4.3010299956639804 check gamma integral 4.8005031443571176E-002 Relaxing model to lower mass! save LOGS/prerelax_prof001.data for model 4503 removing cells 1181 49.084165367783420 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 change to "basic.net" number of species 8 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 6 1.0000000000000000 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.7.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.7.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.5.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.5.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.8.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.8.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_ag_o16_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_o16_ga_c12_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 relax_composition: num_steps_to_use 100 avg remaining difference, lambda 8.6363491935293940D-02 7.0922471359550140D-03 avg remaining difference, lambda 8.3862441184665473D-02 1.4184494271910028D-02 avg remaining difference, lambda 8.1747082422266748D-02 1.6372110008342447D-02 avg remaining difference, lambda 8.0145291471499167D-02 1.9508684725165194D-02 avg remaining difference, lambda 7.8412087324692195D-02 2.1670644466169529D-02 avg remaining difference, lambda 7.6698236426792618D-02 2.1856973024429398D-02 avg remaining difference, lambda 7.5064668393849024D-02 2.1298638526312294D-02 avg remaining difference, lambda 7.3388959347418875D-02 2.2242920043478626D-02 avg remaining difference, lambda 7.1669127150863321D-02 2.3434481067991023D-02 avg remaining difference, lambda 6.9942941500423544D-02 2.4085484238516832D-02 10 7.714851 6.269E+04 -99.000000 -99.000000 49.084165 49.084165 0.574236 0.004427 0.248880 -6.685643 1223 0 -4.1173E+00 7.714851 0.874060 -99.000000 -99.000000 -99.000000 0.000000 0.232750 0.015814 0.174408 0.014283 6 6.0761E-04 0.683740 5.891573 -99.000000 -99.000000 -8.796377 0.000000 0.000067 0.001718 0.076810 0.000E+00 varcontrol avg remaining difference, lambda 6.8231256720560476D-02 2.4472587592904875D-02 avg remaining difference, lambda 6.6509148002460688D-02 2.5060843019463597D-02 avg remaining difference, lambda 6.4777487348532697D-02 2.6170028606033770D-02 avg remaining difference, lambda 6.3013097495486406D-02 2.7282323148420023D-02 avg remaining difference, lambda 6.1252947041610856D-02 2.7933088657992242D-02 avg remaining difference, lambda 5.9521278321255075D-02 2.8270781896596858D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.35.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.35.bin avg remaining difference, lambda 5.7825678709717825D-02 2.8487284655539086D-02 avg remaining difference, lambda 5.6167929846234338D-02 2.8668039678365981D-02 avg remaining difference, lambda 5.4548167130368017D-02 2.8837856578181671D-02 avg remaining difference, lambda 5.2966256938042841D-02 2.9000244481286293D-02 20 7.852680 7.528E+04 -99.000000 -99.000000 49.084165 49.084165 0.434856 0.003352 0.213547 -6.425752 1223 0 -4.0367E+00 7.852680 0.760053 -99.000000 -99.000000 -99.000000 0.000000 0.176256 0.023683 0.349722 0.022732 6 1.4764E-03 1.046190 5.981566 -99.000000 -99.000000 -8.489533 0.000000 0.000051 0.001301 0.164021 0.000E+00 varcontrol avg remaining difference, lambda 5.1421738547594131D-02 2.9160421583700424D-02 avg remaining difference, lambda 4.9913232042723028D-02 2.9335968408627032D-02 avg remaining difference, lambda 4.8434464426745136D-02 2.9537804850795869D-02 avg remaining difference, lambda 4.6992781011445960D-02 2.9765651942235058D-02 avg remaining difference, lambda 4.5578033391806827D-02 3.0017002433447848D-02 avg remaining difference, lambda 4.4189644688369244D-02 3.0285422015588988D-02 avg remaining difference, lambda 4.2834961522103976D-02 3.0568374965775032D-02 avg remaining difference, lambda 4.1512023502476798D-02 3.0884538508184810D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.2.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.2.bin avg remaining difference, lambda 4.0205002442901983D-02 3.1223971421310011D-02 avg remaining difference, lambda 3.8933739529114532D-02 3.1576205904334090D-02 30 7.988847 8.984E+04 -99.000000 -99.000000 49.084165 49.084165 0.319895 0.002466 0.184404 -6.132031 1240 0 -3.9997E+00 7.988847 0.644269 -99.000000 -99.000000 -99.000000 0.000000 0.129660 0.030173 0.494322 0.034135 4 2.4345E-03 1.417741 6.057140 -99.000000 -99.000000 -8.348161 0.000000 0.000039 0.000957 0.235952 0.000E+00 varcontrol avg remaining difference, lambda 3.7686630462761557D-02 3.1945185147616850D-02 avg remaining difference, lambda 3.6464946335098468D-02 3.2330823346983770D-02 avg remaining difference, lambda 3.5269552244491430D-02 3.2739080528647470D-02 avg remaining difference, lambda 3.4093850155464102D-02 3.3163813403439220D-02 avg remaining difference, lambda 3.2946517972971420D-02 3.3609620472984734D-02 avg remaining difference, lambda 3.1816144230682832D-02 3.4097699661522339D-02 avg remaining difference, lambda 3.0711687197358260D-02 3.4629567663437728D-02 avg remaining difference, lambda 2.9628443918582457D-02 3.5187516382840046D-02 avg remaining difference, lambda 2.8568547720923026D-02 3.5772928569478939D-02 avg remaining difference, lambda 2.7525348627573505D-02 3.6390513506419073D-02 40 8.119673 1.058E+05 -99.000000 -99.000000 49.084165 2.172359 0.226378 0.001745 0.160697 -5.830545 1262 0 -3.9381E+00 8.119673 0.529201 -99.000000 -99.000000 -99.000000 0.000000 0.091755 0.035452 0.611949 0.050314 4 3.5115E-03 1.781331 6.111525 -99.000000 -99.000000 -8.280703 46.911806 0.000029 0.000677 0.294466 0.000E+00 varcontrol avg remaining difference, lambda 2.6504474543210234D-02 3.7046950113068723D-02 avg remaining difference, lambda 2.5503654712630008D-02 3.7760410700708846D-02 avg remaining difference, lambda 2.4519095039977283D-02 3.8521856843329712D-02 avg remaining difference, lambda 2.3554837427415622D-02 3.9326803331298670D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.1.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.1.bin avg remaining difference, lambda 2.2607365762649149D-02 4.0182849568785831D-02 avg remaining difference, lambda 2.1675579958327654D-02 4.1092836167766933D-02 avg remaining difference, lambda 2.0763535826931519D-02 4.2077035672262349D-02 avg remaining difference, lambda 1.9866236064267115D-02 4.3133531286465306D-02 avg remaining difference, lambda 1.8986803887732346D-02 4.4267680913533496D-02 avg remaining difference, lambda 1.8122926636812205D-02 4.5498825396879113D-02 50 8.246024 1.243E+05 -99.000000 -99.000000 49.084165 1.295668 0.149107 0.001149 0.141108 -5.525618 1271 0 -3.8411E+00 8.246024 0.418481 -99.000000 -99.000000 -99.000000 0.000000 0.060436 0.039815 0.709142 0.075734 4 4.8073E-03 2.137347 6.169756 -99.000000 -99.000000 -8.306080 47.788497 0.000021 0.000446 0.342815 0.000E+00 varcontrol avg remaining difference, lambda 1.7271784566836996D-02 4.6883863638811051D-02 avg remaining difference, lambda 1.6435983483884368D-02 4.8391126404030274D-02 avg remaining difference, lambda 1.5614198083478536D-02 4.9958849891402833D-02 avg remaining difference, lambda 1.4807504515383027D-02 5.1623925128979592D-02 avg remaining difference, lambda 1.4016456436896205D-02 5.3422108397235699D-02 avg remaining difference, lambda 1.3238744193109202D-02 5.5365956933122400D-02 avg remaining difference, lambda 1.2477444667339466D-02 5.7505421337033076D-02 avg remaining difference, lambda 1.1729965185382671D-02 5.9827336300512360D-02 write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.001_x0.0.bin write /nfs/roberts/project/pi_epb37/ekf27/MESA_testhub/work/runs/32712136/MESA/data/kap_data/cache/gs98_z0.002_x0.0.bin avg remaining difference, lambda 1.0997966257779847D-02 6.2364824182119367D-02 avg remaining difference, lambda 1.0281430460958868D-02 6.5151667551568801D-02 60 8.368629 1.463E+05 -99.000000 -99.000000 49.084165 0.000000 0.084626 0.000652 0.124762 -5.219819 1281 0 -3.6852E+00 8.368629 0.316382 -99.000000 -99.000000 -99.000000 49.084165 0.034301 0.043455 0.790246 0.122121 5 6.5517E-03 2.486562 6.248546 -99.000000 -99.000000 -8.689237 48.388197 0.000014 0.000253 0.383160 0.000E+00 varcontrol avg remaining difference, lambda 9.5790352200536485D-03 6.8277826009635792D-02 avg remaining difference, lambda 8.8914790408899831D-03 7.1738336341786058D-02 avg remaining difference, lambda 8.2194857109202622D-03 7.5577233098369737D-02 avg remaining difference, lambda 7.5635697488634582D-03 7.9800128988993121D-02 avg remaining difference, lambda 6.9236200468530606D-03 8.4609488015992065D-02 avg remaining difference, lambda 6.3006819876126694D-03 9.0010983353726773D-02 avg remaining difference, lambda 5.6931625942800166D-03 9.6307924416800167D-02 avg remaining difference, lambda 5.1031545620230760D-03 1.0359715903859551D-01 avg remaining difference, lambda 4.5325789848048737D-03 1.1180842239308708D-01 avg remaining difference, lambda 3.9815547165132888D-03 1.2146023965442371D-01 70 8.482648 1.700E+05 -99.000000 -99.000000 49.084165 0.000000 0.032783 0.000253 0.111620 -4.928868 1289 0 -3.4147E+00 8.482648 0.220361 -99.000000 -99.000000 -99.000000 49.084165 0.013288 0.046381 0.855456 0.225567 4 9.4137E-03 2.814171 6.317225 -99.000000 -99.000000 -9.062816 48.841952 0.000008 0.000098 0.415599 0.000E+00 varcontrol avg remaining difference, lambda 3.4508858206275159D-03 1.3328185395491482D-01 avg remaining difference, lambda 2.9429173542669710D-03 1.4719947296495667D-01 avg remaining difference, lambda 2.4592035847555531D-03 1.6433082435277901D-01 avg remaining difference, lambda 2.0023617461259113D-03 1.8576825906215091D-01 avg remaining difference, lambda 1.5751934194368814D-03 2.1333231677641223D-01 avg remaining difference, lambda 1.1815060616628425D-03 2.4992963524028564D-01 avg remaining difference, lambda 8.2685353097450168D-04 3.0017002678892862D-01 avg remaining difference, lambda 5.1832971935782254D-04 3.7307836360524610D-01 avg remaining difference, lambda 2.6691778652468856D-04 4.8504285800311664D-01 avg remaining difference, lambda 8.6396641430258305D-05 6.7631800899129457D-01 hydro_solver_step returned ierr -1 s% model_number 80 nz 1292 s% num_retries 0 retry: get_T_tau -- L <= 0 80 avg remaining difference, lambda 1.7665746245022971D-04 3.3815900449564729D-01 80 8.560358 1.886E+05 -99.000000 -99.000000 49.084165 0.000000 0.001455 0.000011 0.103678 -4.727963 1292 1 -2.9700E+00 8.560358 0.144196 -99.000000 -99.000000 -99.000000 49.084165 0.000590 0.048150 0.894861 0.442275 3 1.7622E-02 3.038873 6.345612 -99.000000 -99.000000 -8.837159 48.974070 0.000005 0.000005 0.435201 0.000E+00 retry avg remaining difference, lambda 5.7182756736538838D-05 6.7631800899129457D-01 hydro_solver_step returned ierr -1 s% model_number 81 nz 1293 s% num_retries 1 retry: get_T_tau -- L <= 0 81 avg remaining difference, lambda 1.1692307170458596D-04 3.3815900449564729D-01 avg remaining difference, lambda 3.7846005107718586D-05 6.7631800899129457D-01 hydro_solver_step returned ierr -1 s% model_number 82 nz 1293 s% num_retries 2 retry: get_T_tau -- L <= 0 82 avg remaining difference, lambda 7.7384712131487544D-05 3.3815900449564729D-01 hydro_solver_step returned ierr -1 s% model_number 82 nz 1293 s% num_retries 3 retry: get_T_tau -- L <= 0 82 avg remaining difference, lambda 9.7154065643370621D-05 1.6907950224782364D-01 avg remaining difference, lambda 6.4300658556241987D-05 3.3815900449564729D-01 hydro_solver_step returned ierr -1 s% model_number 83 nz 1293 s% num_retries 4 retry: get_T_tau -- L <= 0 83 avg remaining difference, lambda 8.0727449004018131D-05 1.6907950224782364D-01 avg remaining difference, lambda 5.3428850292577793D-05 3.3815900449564729D-01 hydro_solver_step returned ierr -1 s% model_number 84 nz 1293 s% num_retries 5 retry: get_T_tau -- L <= 0 84 avg remaining difference, lambda 6.7078236587028543D-05 1.6907950224782364D-01 avg remaining difference, lambda 4.4391583946481741D-05 3.3815900449564729D-01 hydro_solver_step returned ierr -1 s% model_number 85 nz 1295 s% num_retries 6 retry: get_T_tau -- L <= 0 85 avg remaining difference, lambda 5.5732233692641289D-05 1.6907950224782364D-01 avg remaining difference, lambda 3.6885991999727388D-05 3.3815900449564729D-01 hydro_solver_step returned ierr -1 s% model_number 86 nz 1295 s% num_retries 7 retry: logRho > hydro_mtx_max_allowed_logRho 46 86 avg remaining difference, lambda 4.6309199703079418D-05 1.6907950224782364D-01 avg remaining difference, lambda 3.0649441829573230D-05 3.3815900449564729D-01 avg remaining difference, lambda 9.9207848788887412D-06 6.7631800899129457D-01 avg remaining difference, lambda 0.0000000000000000D+00 1.0000000000000000D+00 avg remaining difference, lambda 0.0000000000000000D+00 1.0000000000000000D+00 90 8.564151 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718127 1295 8 -2.0768E+00 8.564151 0.150251 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 3 3.7253E-02 3.049865 6.221516 -99.000000 -99.000000 -7.861304 48.984716 0.000004 0.000000 0.436111 0.000E+00 varcontrol finished doing relax composition relax_angular_momentum: max_steps_to_use 1000 10 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 1.0000E-08 3.049840 6.221512 -99.000000 -99.000000 -7.861314 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8782968623791542E-004 1.0000000000000001E-009 10 20 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 2.0000E-08 3.049840 6.221510 -99.000000 -99.000000 -7.861311 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704300308169436E-004 1.0000000000000001E-009 20 30 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 3 3.0000E-08 3.049840 6.221509 -99.000000 -99.000000 -7.861309 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704348702081550E-004 1.0000000000000001E-009 30 40 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 3 4.0000E-08 3.049840 6.221509 -99.000000 -99.000000 -7.861308 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8705558892470738E-004 1.0000000000000001E-009 40 50 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 5.0000E-08 3.049840 6.221509 -99.000000 -99.000000 -7.861308 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704746952919918E-004 1.0000000000000001E-009 50 60 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 6.0000E-08 3.049840 6.221509 -99.000000 -99.000000 -7.861308 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704548902740916E-004 1.0000000000000001E-009 60 70 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 7.0000E-08 3.049840 6.221509 -99.000000 -99.000000 -7.861309 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704419121133260E-004 1.0000000000000001E-009 70 80 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 8.0000E-08 3.049840 6.221510 -99.000000 -99.000000 -7.861310 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8704779483987991E-004 1.0000000000000001E-009 80 90 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 9.0000E-08 3.049840 6.221510 -99.000000 -99.000000 -7.861311 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8705544687457791E-004 1.0000000000000001E-009 90 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 8.564142 1.744E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.718153 1295 217 -9.0000E+00 8.564142 0.150260 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.462589 2 1.0000E-07 3.049840 6.221511 -99.000000 -99.000000 -7.861312 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_angular_momentum avg rel err, dt, model 2.8705218675266736E-004 1.0000000000000001E-009 100 finished doing relax angular momentum relax_entropy: max_steps_to_use 10000 10 8.632040 1.662E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.322121 1295 217 -1.6301E+01 8.632040 0.160288 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.490944 3 5.0000E-16 3.331043 6.158185 -99.000000 -99.000000 -7.766553 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.21332788666977956 4.9999999999999999E-017 10 20 8.677993 1.547E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -4.047558 1295 217 -1.6301E+01 8.677993 0.201207 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.512435 3 1.0000E-15 3.524724 6.115430 -99.000000 -99.000000 -7.772202 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.18338358230957383 4.9999999999999999E-017 20 30 8.709408 1.413E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.852216 1297 217 -1.6301E+01 8.709408 0.267650 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.529108 3 1.5000E-15 3.660686 6.091037 -99.000000 -99.000000 -7.836265 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.15760936587013402 4.9999999999999999E-017 30 40 8.731124 1.270E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.710364 1303 217 -1.6301E+01 8.731124 0.356023 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.542220 3 2.0000E-15 3.757729 6.081792 -99.000000 -99.000000 -7.940302 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.13584721810328418 4.9999999999999999E-017 40 50 8.746488 1.114E+05 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.605138 1314 217 -1.6301E+01 8.746488 0.463164 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.552604 3 2.5000E-15 3.828536 6.068598 -99.000000 -99.000000 -8.085406 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.11682820170094699 4.9999999999999999E-017 50 60 8.757801 9.542E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.525187 1329 217 -1.6301E+01 8.757801 0.585600 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.560846 3 3.0000E-15 3.881762 6.044455 -99.000000 -99.000000 -8.262890 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 0.10029362076086258 4.9999999999999999E-017 60 70 8.766576 8.161E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.462889 1346 217 -1.6301E+01 8.766576 0.718878 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.567382 3 3.5000E-15 3.923184 6.039409 -99.000000 -99.000000 -8.449020 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.6851518158595847E-002 4.9999999999999999E-017 70 80 8.773729 6.986E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.413249 1366 217 -1.6301E+01 8.773729 0.857393 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.572554 3 4.0000E-15 3.956465 6.046445 -99.000000 -99.000000 -8.651845 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.3667826059436101E-002 4.9999999999999999E-017 80 90 8.779733 5.968E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.373117 1384 217 -1.6301E+01 8.779733 0.995075 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.576643 3 4.5000E-15 3.983749 6.048193 -99.000000 -99.000000 -8.845367 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.2131065056881055E-002 4.9999999999999999E-017 90 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 100 8.784832 5.109E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.340431 1392 217 -1.6301E+01 8.784832 1.125889 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.579873 3 5.0000E-15 4.006323 6.039928 -99.000000 -99.000000 -9.035291 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.1237463849346521E-002 4.9999999999999999E-017 100 110 8.789150 4.493E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.313772 1407 217 -1.6301E+01 8.789150 1.244983 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.582429 3 5.5000E-15 4.025006 6.054776 -99.000000 -99.000000 -9.215665 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.1447130182385987E-002 4.9999999999999999E-017 110 120 8.792777 4.069E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.292060 1412 217 -1.6301E+01 8.792777 1.349275 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.584454 3 6.0000E-15 4.040411 6.091092 -99.000000 -99.000000 -9.335593 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.3446668738099386E-002 4.9999999999999999E-017 120 130 8.795798 3.774E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.274421 1423 217 -1.6301E+01 8.795798 1.437656 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.586061 3 6.5000E-15 4.053052 6.137291 -99.000000 -99.000000 -9.446503 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.6522918758381784E-002 4.9999999999999999E-017 130 140 8.798296 3.560E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.260121 1433 217 -1.6301E+01 8.798296 1.510542 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.587339 3 7.0000E-15 4.063383 6.181368 -99.000000 -99.000000 -9.531986 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.0890313646757922E-002 4.9999999999999999E-017 140 150 8.800350 3.398E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.248552 1445 217 -1.6301E+01 8.800350 1.569369 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.588356 3 7.5000E-15 4.071797 6.218465 -99.000000 -99.000000 -9.598661 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6314510044568648E-002 4.9999999999999999E-017 150 160 8.802029 3.277E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.239207 1440 217 -1.6301E+01 8.802029 1.616075 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.589166 3 8.0000E-15 4.078628 6.248783 -99.000000 -99.000000 -9.650690 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.2575358040420174E-002 4.9999999999999999E-017 160 170 8.803397 3.186E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.231669 1441 217 -1.6301E+01 8.803397 1.652697 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.589813 3 8.5000E-15 4.084163 6.273060 -99.000000 -99.000000 -9.691160 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 9.6379770102892476E-003 4.9999999999999999E-017 170 180 8.804510 3.117E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.225591 1442 217 -1.6301E+01 8.804510 1.681122 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.590329 3 9.0000E-15 4.088642 6.291945 -99.000000 -99.000000 -9.722567 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.3815755892980362E-003 4.9999999999999999E-017 180 190 8.805413 3.065E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.220696 1443 217 -1.6301E+01 8.805413 1.703006 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.590742 3 9.5000E-15 4.092261 6.306452 -99.000000 -99.000000 -9.746735 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.6629533284613927E-003 4.9999999999999999E-017 190 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 200 8.806145 3.026E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.216755 1450 217 -1.6301E+01 8.806145 1.719738 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591071 3 1.0000E-14 4.095182 6.317543 -99.000000 -99.000000 -9.765159 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.3316727966202593E-003 4.9999999999999999E-017 200 210 8.806737 2.996E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.213585 1441 217 -1.6301E+01 8.806737 1.732506 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591334 3 1.0500E-14 4.097538 6.325611 -99.000000 -99.000000 -9.778168 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.3154499377419117E-003 4.9999999999999999E-017 210 220 8.807215 2.973E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.211033 1443 217 -1.6301E+01 8.807215 1.742180 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591545 3 1.1000E-14 4.099438 6.332068 -99.000000 -99.000000 -9.788807 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.5297600996287898E-003 4.9999999999999999E-017 220 230 8.807602 2.957E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.208982 1442 217 -1.6301E+01 8.807602 1.749522 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591713 3 1.1500E-14 4.100968 6.336976 -99.000000 -99.000000 -9.796849 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.9292860613953139E-003 4.9999999999999999E-017 230 240 8.807914 2.944E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.207333 1443 217 -1.6301E+01 8.807914 1.755080 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591848 3 1.2000E-14 4.102200 6.340697 -99.000000 -99.000000 -9.802919 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.4715990822290672E-003 4.9999999999999999E-017 240 250 8.808165 2.935E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.206008 1441 217 -1.6301E+01 8.808165 1.759280 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.591956 3 1.2500E-14 4.103192 6.343513 -99.000000 -99.000000 -9.807497 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.1211359762284441E-003 4.9999999999999999E-017 250 260 8.808368 2.928E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.204943 1441 217 -1.6301E+01 8.808368 1.762451 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592042 3 1.3000E-14 4.103990 6.345640 -99.000000 -99.000000 -9.810946 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.5417897772574968E-004 4.9999999999999999E-017 260 270 8.808532 2.922E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.204087 1441 217 -1.6301E+01 8.808532 1.764843 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592111 3 1.3500E-14 4.104633 6.347246 -99.000000 -99.000000 -9.813545 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.5026107477886611E-004 4.9999999999999999E-017 270 280 8.808663 2.918E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.203399 1441 217 -1.6301E+01 8.808663 1.766646 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592166 3 1.4000E-14 4.105150 6.348457 -99.000000 -99.000000 -9.815502 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.9517918825996556E-004 4.9999999999999999E-017 280 290 8.808770 2.915E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.202846 1441 217 -1.6301E+01 8.808770 1.768005 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592210 3 1.4500E-14 4.105565 6.349370 -99.000000 -99.000000 -9.816977 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.7721378918879900E-004 4.9999999999999999E-017 290 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 300 8.808855 2.910E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.202403 1439 217 -1.6301E+01 8.808855 1.769046 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592246 3 1.5000E-14 4.105900 6.348274 -99.000000 -99.000000 -9.813755 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.8785443329000233E-004 4.9999999999999999E-017 300 310 8.808924 2.908E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.202046 1439 217 -1.6301E+01 8.808924 1.769817 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592274 3 1.5500E-14 4.106168 6.348801 -99.000000 -99.000000 -9.814616 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.1944929324805312E-004 4.9999999999999999E-017 310 320 8.808979 2.907E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.201760 1439 217 -1.6301E+01 8.808979 1.770398 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592297 3 1.6000E-14 4.106384 6.349198 -99.000000 -99.000000 -9.815264 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.6736966305263632E-004 4.9999999999999999E-017 320 330 8.809024 2.906E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.201530 1439 217 -1.6301E+01 8.809024 1.770836 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592315 3 1.6500E-14 4.106558 6.349496 -99.000000 -99.000000 -9.815751 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.2770508647775688E-004 4.9999999999999999E-017 330 340 8.809060 2.905E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.201346 1439 217 -1.6301E+01 8.809060 1.771165 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592329 3 1.7000E-14 4.106697 6.349721 -99.000000 -99.000000 -9.816119 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 9.7484458080395776E-005 4.9999999999999999E-017 340 350 8.809089 2.905E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.201198 1439 217 -1.6301E+01 8.809089 1.771413 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592341 3 1.7500E-14 4.106809 6.349890 -99.000000 -99.000000 -9.816395 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 7.4449975423129629E-005 4.9999999999999999E-017 350 360 8.809112 2.904E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.201079 1439 217 -1.6301E+01 8.809112 1.771599 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592350 3 1.8000E-14 4.106899 6.350018 -99.000000 -99.000000 -9.816603 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.6885497923911590E-005 4.9999999999999999E-017 360 370 8.809130 2.904E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200983 1439 217 -1.6301E+01 8.809130 1.771740 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592358 3 1.8500E-14 4.106972 6.350114 -99.000000 -99.000000 -9.816760 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.3486247232951325E-005 4.9999999999999999E-017 370 380 8.809145 2.904E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200907 1439 217 -1.6301E+01 8.809145 1.771846 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592364 3 1.9000E-14 4.107030 6.350186 -99.000000 -99.000000 -9.816878 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.3259903027989097E-005 4.9999999999999999E-017 380 390 8.809157 2.904E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200845 1439 217 -1.6301E+01 8.809157 1.771925 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592369 3 1.9500E-14 4.107076 6.350241 -99.000000 -99.000000 -9.816966 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.5451545142543297E-005 4.9999999999999999E-017 390 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 400 8.809167 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200796 1439 217 -1.6301E+01 8.809167 1.771985 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592372 3 2.0000E-14 4.107114 6.350281 -99.000000 -99.000000 -9.817033 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.9486608265095521E-005 4.9999999999999999E-017 400 410 8.809175 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200756 1439 217 -1.6301E+01 8.809175 1.772030 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592375 3 2.0500E-14 4.107144 6.350312 -99.000000 -99.000000 -9.817083 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.4927677433506832E-005 4.9999999999999999E-017 410 420 8.809181 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200725 1439 217 -1.6301E+01 8.809181 1.772064 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592378 3 2.1000E-14 4.107168 6.350335 -99.000000 -99.000000 -9.817121 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.1441607476101690E-005 4.9999999999999999E-017 420 430 8.809186 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200699 1439 217 -1.6301E+01 8.809186 1.772089 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592380 3 2.1500E-14 4.107187 6.350353 -99.000000 -99.000000 -9.817150 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.7745640575626672E-006 4.9999999999999999E-017 430 440 8.809190 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200679 1439 217 -1.6301E+01 8.809190 1.772109 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592381 3 2.2000E-14 4.107203 6.350366 -99.000000 -99.000000 -9.817171 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.7330618657118363E-006 4.9999999999999999E-017 440 450 8.809193 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200662 1439 217 -1.6301E+01 8.809193 1.772123 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592383 3 2.2500E-14 4.107215 6.350376 -99.000000 -99.000000 -9.817187 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 5.1695533648826975E-006 4.9999999999999999E-017 450 460 8.809196 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200649 1439 217 -1.6301E+01 8.809196 1.772134 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592384 3 2.3000E-14 4.107225 6.350383 -99.000000 -99.000000 -9.817199 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.9714726288835039E-006 4.9999999999999999E-017 460 470 8.809198 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200639 1439 217 -1.6301E+01 8.809198 1.772142 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592385 3 2.3500E-14 4.107233 6.350389 -99.000000 -99.000000 -9.817208 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.0529035828310381E-006 4.9999999999999999E-017 470 480 8.809200 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200630 1439 217 -1.6301E+01 8.809200 1.772148 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592385 3 2.4000E-14 4.107240 6.350393 -99.000000 -99.000000 -9.817215 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.3482438134297280E-006 4.9999999999999999E-017 480 490 8.809201 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200623 1439 217 -1.6301E+01 8.809201 1.772153 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592386 3 2.4500E-14 4.107245 6.350396 -99.000000 -99.000000 -9.817220 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.8073641883653466E-006 4.9999999999999999E-017 490 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 500 8.809202 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200618 1439 217 -1.6301E+01 8.809202 1.772156 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592386 3 2.5000E-14 4.107249 6.350399 -99.000000 -99.000000 -9.817224 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.3919580785560277E-006 4.9999999999999999E-017 500 510 8.809203 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200613 1439 217 -1.6301E+01 8.809203 1.772159 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592386 3 2.5500E-14 4.107252 6.350400 -99.000000 -99.000000 -9.817227 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.0727273426587972E-006 4.9999999999999999E-017 510 520 8.809204 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200610 1439 217 -1.6301E+01 8.809204 1.772161 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.6000E-14 4.107255 6.350402 -99.000000 -99.000000 -9.817229 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 8.2725515864022495E-007 4.9999999999999999E-017 520 530 8.809204 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200607 1439 217 -1.6301E+01 8.809204 1.772162 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.6500E-14 4.107257 6.350403 -99.000000 -99.000000 -9.817231 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 6.3838748593332424E-007 4.9999999999999999E-017 530 540 8.809205 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200605 1439 217 -1.6301E+01 8.809205 1.772163 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.7000E-14 4.107259 6.350403 -99.000000 -99.000000 -9.817232 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 4.9297498323812677E-007 4.9999999999999999E-017 540 550 8.809205 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200603 1439 217 -1.6301E+01 8.809205 1.772164 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.7500E-14 4.107260 6.350404 -99.000000 -99.000000 -9.817233 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 3.8094492002949462E-007 4.9999999999999999E-017 550 560 8.809205 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200602 1439 217 -1.6301E+01 8.809205 1.772165 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.8000E-14 4.107262 6.350404 -99.000000 -99.000000 -9.817234 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.9457923557135513E-007 4.9999999999999999E-017 560 570 8.809206 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200600 1439 217 -1.6301E+01 8.809206 1.772165 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592387 3 2.8500E-14 4.107262 6.350405 -99.000000 -99.000000 -9.817234 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 2.2795475559723749E-007 4.9999999999999999E-017 570 580 8.809206 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200600 1439 217 -1.6301E+01 8.809206 1.772166 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592388 3 2.9000E-14 4.107263 6.350405 -99.000000 -99.000000 -9.817234 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.7652498512647412E-007 4.9999999999999999E-017 580 590 8.809206 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200599 1439 217 -1.6301E+01 8.809206 1.772166 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592388 3 2.9500E-14 4.107264 6.350405 -99.000000 -99.000000 -9.817235 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.3679795442830149E-007 4.9999999999999999E-017 590 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 600 8.809206 2.903E+04 -99.000000 -99.000000 49.084165 0.000000 0.000000 0.000000 0.103309 -3.200598 1439 217 -1.6301E+01 8.809206 1.772166 -99.000000 -99.000000 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592388 3 3.0000E-14 4.107264 6.350405 -99.000000 -99.000000 -9.817235 48.984716 0.000004 0.000000 0.436111 0.000E+00 max_dt relax_entropy avg rel err, dt, model 1.0609078643091840E-007 4.9999999999999999E-017 600 finished doing relax entropy save LOGS/postrelax_prof001.data for model 4503 max_residual > tol_max_residual 4507 2.0299699874955786D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4507 4510 8.811029 2.448E+04 -20.121924 3.234268 49.084165 0.000000 0.000000 0.000000 0.103309 -3.195870 1431 218 -5.3250E+00 8.811029 1.774547 -21.824329 6.218221 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592219 14 2.8821E+05 4.112362 6.059233 3.234268 -21.282997 -9.271124 48.986364 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5605312563778684 rel_E_err 2.2475627533689036D-12 check gamma integral 4.8005650887488531E-002 residual_norm > tol_residual_norm 4518 1.2942771422160266D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4518 2.4859020463091491D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4518 residual_norm > tol_residual_norm 4519 1.8983933111393095D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4519 5.1692943165485970D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4519 residual_norm > tol_residual_norm 4519 2.8835317222902804D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4519 7.9155260387152357D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4519 4520 8.811720 2.397E+04 -24.199472 3.238266 49.084165 0.000000 0.000000 0.000000 0.103309 -3.194077 1429 221 -5.4363E+00 8.811720 1.784311 -21.976265 6.228876 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592155 14 2.8821E+05 4.114295 6.041756 3.238266 -21.210855 -9.260754 48.982627 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5586901413654894 rel_E_err 9.4047892124433438D-11 check gamma integral 4.8020090384341338E-002 residual_norm > tol_residual_norm 4522 1.2210958948498106D-04 9.9999999999999995D-07 max_residual > tol_max_residual 4522 4.4510789042299166D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4522 residual_norm > tol_residual_norm 4529 2.1619674082877762D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4529 1.0344048251137750D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4529 4530 8.811765 2.382E+04 -19.949958 3.239006 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193959 1432 223 -5.2466E+00 8.811765 1.789737 -21.992246 6.229571 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592151 12 2.8821E+05 4.114422 6.042176 3.239006 -21.206123 -9.264443 48.979666 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5567881127633951 rel_E_err 2.7634283407865856D-12 check gamma integral 4.8023845447629297E-002 residual_norm > tol_residual_norm 4535 5.8859340371982696D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4535 6.3772179554346400D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4535 residual_norm > tol_residual_norm 4539 4.7343554036234925D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4539 6.0260339034880143D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4539 4540 8.811784 2.360E+04 -24.445813 3.239753 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193910 1435 225 -5.0568E+00 8.811784 1.799318 -21.999868 6.229853 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592149 12 2.8821E+05 4.114475 6.045301 3.239753 -21.204180 -9.273091 48.979666 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5554133648271984 rel_E_err 3.5887491062748995D-12 check gamma integral 4.8027431703755209E-002 residual_norm > tol_residual_norm 4543 3.7673718867833797D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4543 6.2287540654433572D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4543 residual_norm > tol_residual_norm 4546 4.4898259078028575D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4546 7.9421102541031338D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4546 residual_norm > tol_residual_norm 4550 5.7333290866189207D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4550 8.6825288155120764D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4550 4550 8.811789 2.338E+04 -24.430212 3.240395 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193897 1434 228 -5.1681E+00 8.811789 1.808308 -22.001827 6.229930 -99.000000 49.084165 0.000000 0.048232 0.896691 0.592149 10 2.8821E+05 4.114489 6.046714 3.240395 -21.203637 -9.280121 48.984716 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5548327793715790 rel_E_err 4.3911175169142580D-12 save photos/x550 for model 4550 check gamma integral 4.8029437867977642E-002 residual_norm > tol_residual_norm 4554 8.1933061214628879D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4554 1.0457921553172368D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4554 residual_norm > tol_residual_norm 4558 5.5817720382827388D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4558 9.9915824485673460D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4558 4560 8.811795 2.314E+04 -24.356078 3.240997 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193882 1406 230 -4.9783E+00 8.811795 1.817405 -22.002517 6.229998 -4.934951 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114505 6.046661 3.240997 -21.203038 -9.286209 48.991216 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5541582768525348 rel_E_err 3.9089580511520805D-12 check gamma integral 4.8030826995656861E-002 residual_norm > tol_residual_norm 4562 7.0761187084370347D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4562 1.1735042677580715D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4562 residual_norm > tol_residual_norm 4565 7.0429028737583991D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4565 1.2708520165980344D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4565 residual_norm > tol_residual_norm 4569 6.6377200356636384D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4569 1.4566942949935019D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4569 4570 8.811797 2.291E+04 -23.986110 3.241552 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193878 1405 233 -5.0896E+00 8.811797 1.825559 -22.002710 6.230019 -4.941382 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114510 6.045865 3.241552 -21.202872 -9.291226 48.993995 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5533770392247472 rel_E_err 3.9522945566668024D-12 check gamma integral 4.8031798338898785E-002 residual_norm > tol_residual_norm 4573 4.4588175330211694D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4573 6.5745431532518273D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4573 residual_norm > tol_residual_norm 4577 3.2716660121155644D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4577 6.3882487578785757D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4577 4580 8.811798 2.268E+04 -23.606420 3.242148 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193875 1408 235 -4.8999E+00 8.811798 1.833618 -22.002723 6.230035 -4.948394 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114513 6.044640 3.242148 -21.202762 -9.295984 48.997886 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5526658802082354 rel_E_err 3.7967643858130170D-12 check gamma integral 4.8032617969959911E-002 residual_norm > tol_residual_norm 4581 3.4703784507327083D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4581 6.2065880819364233D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4581 residual_norm > tol_residual_norm 4584 4.5489079077083607D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4584 7.9439989037857484D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4584 residual_norm > tol_residual_norm 4588 4.7588350962608509D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4588 7.7995234725853207D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4588 4590 8.811799 2.250E+04 -23.388506 3.242673 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193873 1408 238 -5.0111E+00 8.811799 1.840215 -22.002658 6.230047 -4.954685 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114515 6.043646 3.242673 -21.202677 -9.299967 48.997886 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5519699253963184 rel_E_err 3.4765552917810030D-12 check gamma integral 4.8033209864424567E-002 residual_norm > tol_residual_norm 4592 4.6669616885949563D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4592 6.9898040285935936D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4592 residual_norm > tol_residual_norm 4596 3.7123335115007770D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4596 6.5928660201037687D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4596 residual_norm > tol_residual_norm 4600 6.2580215695294793D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4600 1.5212274487099808D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4600 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4600 8.811799 2.231E+04 -22.787157 3.243253 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193871 1411 241 -5.1224E+00 8.811799 1.846961 -22.002512 6.230059 -4.960692 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114517 6.042776 3.243253 -21.202595 -9.304205 49.000179 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5514001627270240 rel_E_err 2.9244153473993348D-12 save LOGS/profile32.data for model 4600 save photos/x600 for model 4600 check gamma integral 4.8033759430637667E-002 residual_norm > tol_residual_norm 4606 3.1870180855633730D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4606 1.1990843254813148D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4606 residual_norm > tol_residual_norm 4607 4.0909140666181088D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4607 7.2116563204900092D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4607 4610 8.811800 2.211E+04 -23.114149 3.243939 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193868 1414 243 -4.9327E+00 8.811800 1.854442 -22.002336 6.230073 -4.966287 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114520 6.042086 3.243939 -21.202507 -9.309147 49.002069 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5509778570667194 rel_E_err 2.8653491659232397D-12 check gamma integral 4.8034312154016601E-002 residual_norm > tol_residual_norm 4611 4.8666753528930513D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4611 8.2949580635419448D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4611 residual_norm > tol_residual_norm 4615 4.7493812372621832D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4615 8.1375964618482829D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4615 residual_norm > tol_residual_norm 4620 3.9522235415368069D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4620 1.5012921743062538D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4620 4620 8.811801 2.195E+04 -23.041350 3.244536 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193867 1417 246 -5.0439E+00 8.811801 1.860577 -22.002232 6.230083 -4.970511 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114522 6.041791 3.244536 -21.202435 -9.313408 49.003933 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5505512876098058 rel_E_err 2.8918325719702540D-12 check gamma integral 4.8034734227737796E-002 residual_norm > tol_residual_norm 4624 3.8116289059075748D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4624 1.4492895534322905D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4624 residual_norm > tol_residual_norm 4628 3.6745110735976660D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4628 1.3984957385534713D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4628 residual_norm > tol_residual_norm 4630 6.8167704521692792D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4630 8.9583220100018679D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4630 4630 8.811802 2.178E+04 -22.979064 3.245232 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193865 1418 249 -5.1552E+00 8.811802 1.867316 -22.002106 6.230095 -4.974467 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114524 6.041702 3.245232 -21.202356 -9.318244 49.006146 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5501187748855738 rel_E_err 2.8184813778980066D-12 check gamma integral 4.8035166555580655E-002 residual_norm > tol_residual_norm 4635 4.0895029208151904D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4635 1.5603028449665304D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4635 residual_norm > tol_residual_norm 4639 3.9400476269694988D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4639 1.5044726976960307D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4639 4640 8.811802 2.163E+04 -22.933242 3.245886 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193863 1418 251 -4.9655E+00 8.811802 1.873299 -22.001995 6.230106 -4.977359 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114526 6.041800 3.245886 -21.202286 -9.322635 49.006146 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5496939385415347 rel_E_err 2.4899260147828365D-12 check gamma integral 4.8035526835196005E-002 residual_norm > tol_residual_norm 4642 4.5506631263156991D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4642 1.7395165266563925D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4642 residual_norm > tol_residual_norm 4646 4.3776327002013184D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4646 1.6768718064162477D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4646 residual_norm > tol_residual_norm 4650 4.2051069989790642D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4650 1.6163251235660772D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4650 4650 8.811803 2.150E+04 -22.897212 3.246508 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193861 1424 254 -5.0768E+00 8.811803 1.878696 -22.001898 6.230116 -4.979845 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114527 6.042003 3.246508 -21.202223 -9.326644 49.007971 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5492619245187722 rel_E_err 2.8701641347509532D-12 save photos/x650 for model 4650 check gamma integral 4.8035835313651999E-002 residual_norm > tol_residual_norm 4654 4.0500394362429829D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4654 1.5577260892899233D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4654 residual_norm > tol_residual_norm 4657 4.6726134320740912D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4657 1.8003925095416370D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4657 4660 8.811803 2.138E+04 -22.864307 3.247139 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193860 1425 256 -4.8870E+00 8.811803 1.883900 -22.001810 6.230125 -4.981880 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114529 6.042273 3.247139 -21.202162 -9.330525 49.009413 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5488417433813391 rel_E_err 2.9497749432271981D-12 check gamma integral 4.8036119947591119E-002 residual_norm > tol_residual_norm 4661 4.4976668786638948D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4661 1.7350960402533011D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4661 residual_norm > tol_residual_norm 4665 4.3318920506427935D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4665 1.6720129104534459D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4665 residual_norm > tol_residual_norm 4669 4.1660076186555644D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4669 1.6110791389469209D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4669 4670 8.811804 2.126E+04 -22.836476 3.247737 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193858 1428 259 -4.9983E+00 8.811804 1.888619 -22.001736 6.230133 -4.983747 49.084165 0.000000 0.048232 0.896691 0.592148 12 2.8821E+05 4.114530 6.042572 3.247737 -21.202108 -9.334044 49.009413 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5484090798407646 rel_E_err 2.6032429533392165D-12 check gamma integral 4.8036368145762079E-002 residual_norm > tol_residual_norm 4672 4.7563256594314596D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4672 7.7662986068433068D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4672 residual_norm > tol_residual_norm 4677 1.2418894478006290D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4677 1.8185962919989588D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4677 residual_norm > tol_residual_norm 4679 1.3212137359822606D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4679 2.0361904848415116D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4679 max_residual > tol_max_residual 4679 4.0304871864420208D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4679 residual_norm > tol_residual_norm 4680 1.2771276977711587D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4680 3.4686283252311427D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4680 4680 8.811804 2.117E+04 -22.811314 3.248260 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1427 264 -5.7116E+00 8.811804 1.892581 -22.001680 6.230140 -4.985314 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114532 6.042852 3.248260 -21.202062 -9.336987 49.010843 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5480418422625597 rel_E_err 1.9705292104691654D-12 check gamma integral 4.8036569838063758E-002 residual_norm > tol_residual_norm 4683 1.6452870673600260D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4683 3.4647652559863448D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4683 residual_norm > tol_residual_norm 4685 2.1271085158744057D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4685 4.7802561398758547D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4685 residual_norm > tol_residual_norm 4689 2.1850148211313135D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4689 4.5710651038675915D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4689 4690 8.811805 2.115E+04 -22.810506 3.248363 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1429 267 -5.8229E+00 8.811805 1.893352 -22.001673 6.230142 -4.985572 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114532 6.042917 3.248363 -21.202053 -9.337564 49.010843 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5477347136324946 rel_E_err 1.9300817533918799D-12 check gamma integral 4.8036608052819424E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4700 8.811805 2.111E+04 -22.800346 3.248630 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1430 267 -5.0311E+00 8.811805 1.895322 -22.001658 6.230145 -4.986130 49.084165 0.000000 0.048232 0.896691 0.592147 14 2.8821E+05 4.114533 6.043069 3.248630 -21.202030 -9.339022 49.010843 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5474177949037724 rel_E_err 2.0624989889152087D-12 save LOGS/profile33.data for model 4700 save photos/x700 for model 4700 check gamma integral 4.8036705269534352E-002 max_residual > tol_max_residual 4701 2.1557322616842536D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4701 max_residual > tol_max_residual 4701 8.6690966421585358D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4701 max_residual > tol_max_residual 4701 1.7195539423446218D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4701 residual_norm > tol_residual_norm 4709 1.7457972256757968D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4709 2.9522945387913717D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4709 residual_norm > tol_residual_norm 4710 1.1319403527342498D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4710 6.6301382114015553D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4710 4710 8.811805 2.108E+04 -22.794552 3.248789 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1430 272 -5.7444E+00 8.811805 1.896476 -22.001650 6.230147 -4.986618 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043168 3.248789 -21.202017 -9.339879 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5471056068746618 rel_E_err 2.0669931407682928D-12 check gamma integral 4.8036761622440999E-002 residual_norm > tol_residual_norm 4713 1.2930931818385686D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4713 7.4814272647930766D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4713 max_residual > tol_max_residual 4714 1.9990202655479853D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4714 max_residual > tol_max_residual 4715 2.6730182587131283D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4715 max_residual > tol_max_residual 4716 3.3132629249200601D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4716 max_residual > tol_max_residual 4717 3.8759825728183546D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4717 max_residual > tol_max_residual 4718 4.3143657669457922D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4718 max_residual > tol_max_residual 4719 4.6288753509878260D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4719 max_residual > tol_max_residual 4720 4.8408129131607851D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4720 4720 8.811805 2.107E+04 -22.792800 3.248838 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 280 -7.3608E+00 8.811805 1.896830 -22.001648 6.230148 -4.986754 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043199 3.248838 -21.202013 -9.340142 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5467936810141962 rel_E_err 2.0019883063476607D-12 check gamma integral 4.8036778780425067E-002 max_residual > tol_max_residual 4723 4.8929795751750750D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4723 max_residual > tol_max_residual 4727 4.8921774940182620D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4727 max_residual > tol_max_residual 4730 4.9405801023293824D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4730 4730 8.811805 2.107E+04 -22.792701 3.248841 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 283 -7.4721E+00 8.811805 1.896850 -22.001647 6.230148 -4.986761 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043200 3.248841 -21.202013 -9.340157 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5464926407822821 rel_E_err 1.9337733595276239D-12 check gamma integral 4.8036779764135139E-002 max_residual > tol_max_residual 4734 4.9409349445025071D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4734 max_residual > tol_max_residual 4738 4.9418893399794751D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4738 4740 8.811805 2.107E+04 -22.792606 3.248844 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 285 -7.2824E+00 8.811805 1.896869 -22.001647 6.230148 -4.986768 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043202 3.248844 -21.202013 -9.340171 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5461888645985420 rel_E_err 1.9393910609091096D-12 check gamma integral 4.8036780695907867E-002 max_residual > tol_max_residual 4741 4.9886645403348667D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4741 max_residual > tol_max_residual 4745 4.9903410317416567D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4745 max_residual > tol_max_residual 4749 4.9925880232050530D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4749 4750 8.811805 2.107E+04 -22.792521 3.248846 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 288 -7.3936E+00 8.811805 1.896886 -22.001647 6.230148 -4.986774 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043203 3.248846 -21.202012 -9.340183 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5458831251799943 rel_E_err 1.9806410403414314D-12 save photos/x750 for model 4750 check gamma integral 4.8036781525742554E-002 max_residual > tol_max_residual 4753 4.9954350287306042D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4753 max_residual > tol_max_residual 4756 5.0423785566419459D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4756 max_residual > tol_max_residual 4760 5.0456557075296685D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4760 4760 8.811805 2.107E+04 -22.792435 3.248848 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 291 -7.5049E+00 8.811805 1.896904 -22.001647 6.230148 -4.986780 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043205 3.248848 -21.202012 -9.340196 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5455778603612709 rel_E_err 2.0141867434346280D-12 check gamma integral 4.8036782376437735E-002 max_residual > tol_max_residual 4764 5.0494969095696916D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4764 max_residual > tol_max_residual 4768 5.0539515133473260D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4768 4770 8.811805 2.107E+04 -22.792347 3.248851 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 293 -7.3152E+00 8.811805 1.896922 -22.001647 6.230148 -4.986786 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043206 3.248851 -21.202012 -9.340209 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5452790828701612 rel_E_err 1.9604173147685415D-12 check gamma integral 4.8036783241023555E-002 max_residual > tol_max_residual 4772 5.0590721139967217D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4772 max_residual > tol_max_residual 4776 5.0649191727907050D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4776 max_residual > tol_max_residual 4780 5.0715523651628264D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4780 4780 8.811805 2.107E+04 -22.792247 3.248854 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 296 -7.4264E+00 8.811805 1.896941 -22.001647 6.230148 -4.986792 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043208 3.248854 -21.202012 -9.340224 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5449778630038482 rel_E_err 1.9451692677483554D-12 check gamma integral 4.8036784189019799E-002 max_residual > tol_max_residual 4784 5.0790294830548914D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4784 max_residual > tol_max_residual 4789 5.0318914029001079D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4789 4790 8.811805 2.107E+04 -22.792134 3.248857 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 298 -7.2367E+00 8.811805 1.896964 -22.001647 6.230148 -4.986799 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043210 3.248857 -21.202011 -9.340241 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5446762166990498 rel_E_err 2.0019883055424189D-12 check gamma integral 4.8036785302850972E-002 max_residual > tol_max_residual 4793 5.0436084036165625D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4793 max_residual > tol_max_residual 4797 5.0567877570570290D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4797 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4800 8.811805 2.107E+04 -22.790723 3.248861 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 300 -7.0469E+00 8.811805 1.896993 -22.001646 6.230148 -4.986808 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043212 3.248861 -21.202011 -9.340262 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5443741669661950 rel_E_err 1.9613803488645303D-12 save LOGS/profile34.data for model 4800 save photos/x800 for model 4800 check gamma integral 4.8036786696449729E-002 max_residual > tol_max_residual 4801 5.0715417013992035D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4801 max_residual > tol_max_residual 4806 5.0151967839942128D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4806 max_residual > tol_max_residual 4810 5.0377959818198946D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4810 4810 8.811805 2.107E+04 -22.791827 3.248865 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 303 -7.1582E+00 8.811805 1.897027 -22.001646 6.230148 -4.986819 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043215 3.248865 -21.202011 -9.340288 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5440690213073820 rel_E_err 1.9056848510105413D-12 check gamma integral 4.8036788346972233E-002 max_residual > tol_max_residual 4814 5.0637392130691773D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4814 max_residual > tol_max_residual 4819 5.0001387942913721D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4819 4820 8.811805 2.107E+04 -22.791212 3.248871 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1429 305 -6.9685E+00 8.811805 1.897070 -22.001646 6.230148 -4.986832 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043219 3.248871 -21.202010 -9.340319 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5437688343474747 rel_E_err 1.9824066024830305D-12 check gamma integral 4.8036790408076117E-002 max_residual > tol_max_residual 4823 5.0382564554351549D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4823 max_residual > tol_max_residual 4828 4.9702572643953113D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4828 4830 8.811805 2.107E+04 -22.791336 3.248879 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1429 307 -6.7787E+00 8.811805 1.897127 -22.001646 6.230148 -4.986849 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043224 3.248879 -21.202010 -9.340362 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5434680775584413 rel_E_err 1.9820855905547041D-12 check gamma integral 4.8036793181441467E-002 max_residual > tol_max_residual 4831 3.1060456941105836D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4831 max_residual > tol_max_residual 4832 3.0670898150424154D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4832 max_residual > tol_max_residual 4833 3.6816238745621128D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4833 max_residual > tol_max_residual 4836 4.8367918779730935D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4836 4840 8.811805 2.106E+04 -22.791231 3.248882 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1431 311 -7.1910E+00 8.811805 1.897148 -22.001645 6.230148 -4.986857 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043226 3.248882 -21.202009 -9.340378 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5431681594262585 rel_E_err 1.9398725763912606D-12 check gamma integral 4.8036794215839791E-002 max_residual > tol_max_residual 4841 8.5529436494821611D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4841 4850 8.811805 2.106E+04 -22.791029 3.248888 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1431 312 -6.7002E+00 8.811805 1.897190 -22.001645 6.230148 -4.986869 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043230 3.248888 -21.202009 -9.340408 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5428664410786839 rel_E_err 2.0143472472433158D-12 save photos/x850 for model 4850 check gamma integral 4.8036796206277044E-002 max_residual > tol_max_residual 4859 1.0689396907184800D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4859 4860 8.811805 2.106E+04 -22.790009 3.248917 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1431 313 -6.2095E+00 8.811805 1.897398 -22.001644 6.230149 -4.986928 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043248 3.248917 -21.202006 -9.340563 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5425647355525953 rel_E_err 2.1315164479437685D-12 check gamma integral 4.8036806262598986E-002 max_residual > tol_max_residual 4863 1.1019138078457738D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4863 max_residual > tol_max_residual 4868 1.0336948432077562D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4868 4870 8.811805 2.105E+04 -22.788407 3.248963 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1431 315 -6.0197E+00 8.811805 1.897725 -22.001642 6.230149 -4.987029 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043276 3.248963 -21.202003 -9.340805 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5422595321027970 rel_E_err 2.0936370866784347D-12 check gamma integral 4.8036822057097001E-002 max_residual > tol_max_residual 4872 1.0703363355573255D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4872 max_residual > tol_max_residual 4876 1.1063651471389414D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4876 4880 8.811805 2.104E+04 -22.786398 3.249020 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1431 317 -5.8300E+00 8.811805 1.898138 -22.001639 6.230150 -4.987156 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043311 3.249020 -21.201998 -9.341109 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5419562718014612 rel_E_err 2.0292742750286714D-12 check gamma integral 4.8036841941543125E-002 max_residual > tol_max_residual 4881 1.0305222161236985D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4881 max_residual > tol_max_residual 4881 1.5862828884221594D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4881 max_residual > tol_max_residual 4881 2.1848553098826561D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4881 max_residual > tol_max_residual 4882 3.0466723384878915D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4882 max_residual > tol_max_residual 4884 3.7495151636274607D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4884 max_residual > tol_max_residual 4888 3.4748835302334601D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4888 max_residual > tol_max_residual 4890 3.7063988735904524D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4890 4890 8.811805 2.104E+04 -22.786148 3.249028 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 324 -7.1454E+00 8.811805 1.898191 -22.001639 6.230150 -4.987192 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043316 3.249028 -21.201997 -9.341149 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5416584995238640 rel_E_err 1.9769493981347142D-12 check gamma integral 4.8036844516948944E-002 max_residual > tol_max_residual 4893 3.4766968949641791D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4893 max_residual > tol_max_residual 4898 2.2779610518657512D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4898 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4900 8.811805 2.104E+04 -22.785966 3.249033 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 326 -6.9556E+00 8.811805 1.898229 -22.001639 6.230150 -4.987204 49.084165 0.000000 0.048232 0.896691 0.592147 13 2.8821E+05 4.114533 6.043319 3.249033 -21.201997 -9.341176 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5413555947856841 rel_E_err 1.9880242950425619D-12 save LOGS/profile35.data for model 4900 save photos/x900 for model 4900 check gamma integral 4.8036846329338127E-002 max_residual > tol_max_residual 4902 1.2956485638548700D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 4902 residual_norm > tol_residual_norm 4905 1.0924067568439305D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4905 2.6449601169320414D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4905 residual_norm > tol_residual_norm 4906 1.4495085893859883D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4906 3.6798217197255889D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4906 residual_norm > tol_residual_norm 4907 1.8281799168378179D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4907 4.9487385377934717D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4907 residual_norm > tol_residual_norm 4908 2.2652655916379166D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4908 6.4712494901694506D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4908 residual_norm > tol_residual_norm 4909 2.7048582627809221D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4909 8.1210981666376747D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4909 residual_norm > tol_residual_norm 4910 2.9400684442259657D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4910 8.8079173850833170D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4910 4910 8.811805 2.104E+04 -22.785850 3.249036 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 333 -8.2710E+00 8.811805 1.898253 -22.001638 6.230150 -4.987213 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249036 -21.201997 -9.341194 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5410543936238446 rel_E_err 1.9729367538169741D-12 check gamma integral 4.8036847474676722E-002 residual_norm > tol_residual_norm 4911 3.1868177393668819D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4911 9.7006689465704132D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4911 max_residual > tol_max_residual 4911 7.7791235536992980D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4911 max_residual > tol_max_residual 4911 7.8905907462020787D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4911 max_residual > tol_max_residual 4911 7.9469706768611151D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4911 residual_norm > tol_residual_norm 4917 3.5491218641296226D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4917 1.0890166759126767D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4917 4920 8.811805 2.104E+04 -22.785850 3.249036 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 338 -8.9843E+00 8.811805 1.898253 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249036 -21.201997 -9.341194 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5407527329244957 rel_E_err 2.0623384599934664D-12 check gamma integral 4.8036847488933943E-002 residual_norm > tol_residual_norm 4921 3.5121564559659070D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4921 1.0856122338785459D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4921 residual_norm > tol_residual_norm 4925 3.5165214509216318D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4925 1.0837928694298986D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4925 max_residual > tol_max_residual 4928 7.3728684381692269D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4928 4930 8.811805 2.104E+04 -22.785848 3.249036 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 341 -9.0956E+00 8.811805 1.898253 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249036 -21.201997 -9.341194 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5404483903163193 rel_E_err 2.0292742742747306D-12 check gamma integral 4.8036847504214358E-002 residual_norm > tol_residual_norm 4932 3.5312141298466312D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4932 1.0897756761592325D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4932 residual_norm > tol_residual_norm 4936 3.5507097627941210D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4936 1.0892316753175098D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4936 residual_norm > tol_residual_norm 4940 3.5139688501508732D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4940 1.0858696365373766D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4940 4940 8.811805 2.104E+04 -22.785847 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 344 -9.2069E+00 8.811805 1.898254 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341195 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5401485185895227 rel_E_err 2.0687586903093011D-12 check gamma integral 4.8036847519271987E-002 residual_norm > tol_residual_norm 4943 3.4699186178064177D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4943 1.0542468354178296D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4943 max_residual > tol_max_residual 4947 6.7538225648829308D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4947 4950 8.811805 2.104E+04 -22.785845 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 346 -9.0171E+00 8.811805 1.898254 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341195 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5398485904150858 rel_E_err 2.1143423250772063D-12 save photos/x950 for model 4950 check gamma integral 4.8036847535617128E-002 residual_norm > tol_residual_norm 4951 3.5315709104226113D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4951 1.0899069997337880D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4951 residual_norm > tol_residual_norm 4955 3.5526067478717118D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4955 1.0894225093008194D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4955 residual_norm > tol_residual_norm 4959 3.5157462027769839D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4959 1.0861046125516929D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4959 4960 8.811805 2.104E+04 -22.785844 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 349 -9.1284E+00 8.811805 1.898254 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341195 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5395493811014411 rel_E_err 2.0196439290145704D-12 check gamma integral 4.8036847549740809E-002 residual_norm > tol_residual_norm 4962 3.4723222933945636D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4962 1.0554954619956569D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4962 max_residual > tol_max_residual 4966 6.1352643577080512D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4966 residual_norm > tol_residual_norm 4970 3.5319682920008845D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4970 1.0900621393232979D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4970 4970 8.811805 2.104E+04 -22.785842 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 352 -9.2397E+00 8.811805 1.898255 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341195 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5392509930576397 rel_E_err 1.9040797846553040D-12 check gamma integral 4.8036847562750999E-002 residual_norm > tol_residual_norm 4974 3.5543462431354787D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4974 1.0896444098825286D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4974 residual_norm > tol_residual_norm 4978 3.5175860260215657D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4978 1.0863792994405466D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4978 4980 8.811805 2.104E+04 -22.785841 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 354 -9.0499E+00 8.811805 1.898255 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341196 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5389511051912859 rel_E_err 2.0132236988406408D-12 check gamma integral 4.8036847579073644E-002 residual_norm > tol_residual_norm 4981 3.4747668299916455D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4981 1.0567693521197044D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4981 max_residual > tol_max_residual 4985 5.5171214722870981D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 4985 residual_norm > tol_residual_norm 4989 3.5323762673189929D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4989 1.0902241196393767D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4989 4990 8.811805 2.104E+04 -22.785839 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 357 -9.1612E+00 8.811805 1.898255 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341196 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5386510074169948 rel_E_err 2.0307188262918483D-12 check gamma integral 4.8036847593300618E-002 residual_norm > tol_residual_norm 4993 3.5560739428934462D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4993 1.0898590690820253D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4993 residual_norm > tol_residual_norm 4997 3.5193894026218094D-05 9.9999999999999995D-07 max_residual > tol_max_residual 4997 1.0866290445096649D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4997 residual_norm > tol_residual_norm 5000 3.4770593832057719D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5000 1.0579581468068973D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5000 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5000 8.811805 2.104E+04 -22.785838 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 360 -9.2725E+00 8.811805 1.898255 -22.001638 6.230150 -4.987214 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341196 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5383531683443996 rel_E_err 2.0793520704289418D-12 save LOGS/profile36.data for model 5000 save photos/5000 for model 5000 check gamma integral 4.8036847608669733E-002 max_residual > tol_max_residual 5004 4.8994769880470719D-03 1.0000000000000000D-03 retry: max resid -- give up in solver 5004 5010 8.811805 2.104E+04 -22.785836 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 361 -8.7817E+00 8.811805 1.898256 -22.001638 6.230150 -4.987215 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043321 3.249037 -21.201997 -9.341196 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5380534039142919 rel_E_err 2.0279902285079933D-12 check gamma integral 4.8036847627562912E-002 5020 8.811805 2.104E+04 -22.785826 3.249037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 361 -7.9899E+00 8.811805 1.898258 -22.001638 6.230150 -4.987215 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043322 3.249037 -21.201997 -9.341198 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5377524636537627 rel_E_err 1.9987781809158655D-12 check gamma integral 4.8036847726586437E-002 5030 8.811805 2.104E+04 -22.785763 3.249039 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 361 -7.1981E+00 8.811805 1.898271 -22.001638 6.230150 -4.987219 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043323 3.249039 -21.201996 -9.341207 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5374520177406978 rel_E_err 1.9970126175323391D-12 check gamma integral 4.8036848349318782E-002 5040 8.811805 2.104E+04 -22.785378 3.249050 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 361 -6.4063E+00 8.811805 1.898351 -22.001638 6.230150 -4.987240 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043330 3.249050 -21.201995 -9.341267 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5371528361757250 rel_E_err 2.0846487597368469D-12 check gamma integral 4.8036852194922403E-002 max_residual > tol_max_residual 5049 1.1058330755252239D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5049 5050 8.811805 2.103E+04 -22.783414 3.249107 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 362 -5.9155E+00 8.811805 1.898755 -22.001635 6.230151 -4.987360 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043364 3.249107 -21.201991 -9.341564 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5368610790318158 rel_E_err 1.9491818984717211D-12 save photos/x050 for model 5050 check gamma integral 4.8036871574288910E-002 residual_norm > tol_residual_norm 5053 1.4723820342488368D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5053 1.0091196225535813D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5053 residual_norm > tol_residual_norm 5057 1.4305302566611683D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5057 9.8043260076594876D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5057 5060 8.811805 2.101E+04 -22.780622 3.249190 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1428 364 -5.7257E+00 8.811805 1.899345 -22.001632 6.230152 -4.987543 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114533 6.043414 3.249190 -21.201984 -9.341998 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5365601780834348 rel_E_err 2.0661905895320758D-12 check gamma integral 4.8036899799583012E-002 residual_norm > tol_residual_norm 5061 1.3895319350118270D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5061 9.5232953787157792D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5061 residual_norm > tol_residual_norm 5065 1.3493857124929270D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5065 9.2481128518656600D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5065 5070 8.811805 2.100E+04 -22.777279 3.249291 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193857 1429 366 -5.5360E+00 8.811805 1.900050 -22.001627 6.230153 -4.987759 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114533 6.043474 3.249291 -21.201976 -9.342516 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5362627422169446 rel_E_err 2.0917109986396627D-12 check gamma integral 4.8036933403124503E-002 residual_norm > tol_residual_norm 5071 1.1215247731752460D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5071 6.6776206284808140D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5071 residual_norm > tol_residual_norm 5075 1.0971486460520789D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5075 6.4662445019609716D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5075 residual_norm > tol_residual_norm 5079 1.0741190760179192D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5079 6.2604215528459864D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5079 5080 8.811805 2.098E+04 -22.773014 3.249423 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1428 369 -5.6473E+00 8.811805 1.900969 -22.001622 6.230155 -4.988067 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114534 6.043552 3.249423 -21.201965 -9.343188 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5359572057764357 rel_E_err 1.9990991704745193D-12 check gamma integral 4.8036976971122018E-002 max_residual > tol_max_residual 5084 5.1773902035568357D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5084 max_residual > tol_max_residual 5088 5.0056987834416679D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5088 5090 8.811806 2.095E+04 -22.767425 3.249600 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1428 371 -5.4575E+00 8.811806 1.902189 -22.001615 6.230157 -4.988449 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114534 6.043655 3.249600 -21.201951 -9.344079 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5356481828855886 rel_E_err 2.0427567252780294D-12 check gamma integral 4.8037034442512658E-002 max_residual > tol_max_residual 5092 4.8389824260462434D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5092 residual_norm > tol_residual_norm 5096 2.2864723660743165D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5096 3.5299590322782147D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5096 residual_norm > tol_residual_norm 5100 2.2573930774919698D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5100 3.5292054534205662D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5100 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5100 8.811806 2.092E+04 -22.761496 3.249794 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193856 1428 374 -5.5688E+00 8.811806 1.903515 -22.001608 6.230160 -4.988889 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114535 6.043769 3.249794 -21.201936 -9.345042 49.012610 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5353410848733429 rel_E_err 2.0422751965883143D-12 save LOGS/profile37.data for model 5100 save photos/x100 for model 5100 check gamma integral 4.8037096385051714E-002 residual_norm > tol_residual_norm 5104 2.2283085898420147D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5104 3.5254179627638771D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5104 max_residual > tol_max_residual 5108 1.2600679844138167D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5108 5110 8.811806 2.088E+04 -22.755284 3.250006 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193855 1428 376 -5.3790E+00 8.811806 1.904937 -22.001600 6.230162 -4.989330 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114535 6.043891 3.250006 -21.201920 -9.346072 49.012610 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5350340415952148 rel_E_err 2.1267012095178440D-12 check gamma integral 4.8037162294999818E-002 max_residual > tol_max_residual 5112 1.2977621656904394D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5112 max_residual > tol_max_residual 5117 1.1625675125913977D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5117 5120 8.811806 2.084E+04 -22.747717 3.250274 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193855 1425 378 -5.1893E+00 8.811806 1.906718 -22.001591 6.230165 -4.989899 49.084165 0.000000 0.048232 0.896691 0.592147 14 2.8821E+05 4.114536 6.044034 3.250274 -21.201899 -9.341999 49.014708 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5347278797795845 rel_E_err 1.9556020630911185D-12 check gamma integral 4.8037243851291586E-002 residual_norm > tol_residual_norm 5121 2.0494043058645670D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5121 3.2039754738231958D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5121 max_residual > tol_max_residual 5123 1.6477944354794067D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5123 max_residual > tol_max_residual 5127 1.6715472639138348D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5127 5130 8.811806 2.081E+04 -22.741800 3.250494 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193854 1422 381 -5.3006E+00 8.811806 1.908157 -22.001584 6.230168 -4.990383 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114536 6.044158 3.250494 -21.201883 -9.343080 49.014708 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5344232096420942 rel_E_err 1.9949259592256330D-12 check gamma integral 4.8037309266189078E-002 max_residual > tol_max_residual 5131 1.6950399515521478D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5131 max_residual > tol_max_residual 5136 3.3058231141452246D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5136 residual_norm > tol_residual_norm 5140 1.7531220911543876D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5140 3.0234933866264194D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5140 5140 8.811806 2.077E+04 -22.735079 3.250755 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193854 1424 384 -5.4118E+00 8.811806 1.909832 -22.001576 6.230171 -4.990940 49.084165 0.000000 0.048232 0.896691 0.592147 10 2.8821E+05 4.114536 6.044302 3.250755 -21.201864 -9.344332 49.014708 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5341191303535009 rel_E_err 2.0766233699808397D-12 check gamma integral 4.8037384780901013E-002 residual_norm > tol_residual_norm 5144 1.7140125355403116D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5144 3.0884293862630873D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5144 residual_norm > tol_residual_norm 5150 1.4190561589562666D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5150 2.3493250624229193D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5150 5150 8.811807 2.072E+04 -22.726466 3.251108 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193853 1426 386 -5.2221E+00 8.811807 1.912058 -22.001566 6.230175 -4.991649 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114537 6.044488 3.251108 -21.201838 -9.345980 49.014708 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5338127987965127 rel_E_err 2.2230045895169248D-12 save photos/x150 for model 5150 check gamma integral 4.8037484026258577E-002 max_residual > tol_max_residual 5157 2.0491170978530544D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5157 max_residual > tol_max_residual 5160 1.7069794170953039D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5160 5160 8.811807 2.063E+04 -22.711529 3.251779 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193852 1425 388 -5.0323E+00 8.811807 1.916154 -22.001552 6.230182 -4.993002 49.084165 0.000000 0.048232 0.896691 0.592147 12 2.8821E+05 4.114538 6.044814 3.251779 -21.201792 -9.348968 49.014708 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5334980914586378 rel_E_err 2.1677905702198665D-12 check gamma integral 4.8037663660125039E-002 residual_norm > tol_residual_norm 5163 1.3008646648938314D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5163 1.8268597474811729D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5163 residual_norm > tol_residual_norm 5167 1.3785984363084399D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5167 2.5057318579161197D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5167 residual_norm > tol_residual_norm 5170 1.6301857682411894D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5170 2.7857972459809272D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5170 5170 8.811808 2.055E+04 -22.699855 3.252364 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193851 1425 391 -5.1436E+00 8.811808 1.919603 -22.001542 6.230188 -4.994177 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114540 6.045095 3.252364 -21.201753 -9.351455 49.016266 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5331854192751742 rel_E_err 2.1504559129981681D-12 check gamma integral 4.8037811797222690E-002 residual_norm > tol_residual_norm 5175 1.4183098878614774D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5175 2.4019384465977071D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5175 max_residual > tol_max_residual 5179 1.3676745397147529D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5179 5180 8.811808 2.047E+04 -22.688380 3.253001 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193850 1425 393 -4.9539E+00 8.811808 1.923225 -22.001536 6.230194 -4.995362 49.084165 0.000000 0.048233 0.896691 0.592147 16 2.8821E+05 4.114541 6.045382 3.253001 -21.201712 -9.354028 49.017124 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5328721548271638 rel_E_err 2.0729316013861720D-12 check gamma integral 4.8037964334595153E-002 residual_norm > tol_residual_norm 5181 1.2967729901710448D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5181 2.7668663288078311D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5181 residual_norm > tol_residual_norm 5185 1.2643805388956556D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5185 2.7192906716907144D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5185 residual_norm > tol_residual_norm 5190 1.6686459544743798D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5190 2.4827631253028056D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5190 5190 8.811808 2.040E+04 -22.679686 3.253532 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1427 396 -5.0651E+00 8.811808 1.926149 -22.001534 6.230199 -4.996385 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045615 3.253532 -21.201679 -9.356081 49.017977 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5325624673125446 rel_E_err 2.0832039359021646D-12 check gamma integral 4.8038085259689563E-002 max_residual > tol_max_residual 5192 1.1884687079484899D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5192 max_residual > tol_max_residual 5192 3.7045235272534512D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5192 residual_norm > tol_residual_norm 5193 1.0796810006706853D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5193 5.6671009020104413D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5193 residual_norm > tol_residual_norm 5194 1.5310553488453133D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5194 8.3062394049279731D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5194 max_residual > tol_max_residual 5194 2.8287512983335723D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5194 max_residual > tol_max_residual 5195 3.2857165779212501D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5195 max_residual > tol_max_residual 5198 3.4092027717219586D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5198 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5200 8.811808 2.039E+04 -22.678144 3.253632 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 403 -6.3805E+00 8.811808 1.926692 -22.001534 6.230200 -4.996637 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045662 3.253632 -21.201673 -9.356463 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5322624493450041 rel_E_err 2.0063216828727234D-12 save LOGS/profile38.data for model 5200 save photos/x200 for model 5200 check gamma integral 4.8038107518661437E-002 residual_norm > tol_residual_norm 5201 1.9126503237946529D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5201 6.5776693634127481D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5201 residual_norm > tol_residual_norm 5205 1.8674018415766248D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5205 6.3838584634545514D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5205 residual_norm > tol_residual_norm 5209 1.8233198606208807D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5209 6.1949167943014871D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5209 5210 8.811808 2.039E+04 -22.677860 3.253650 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 406 -6.4918E+00 8.811808 1.926792 -22.001534 6.230201 -4.996668 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045671 3.253650 -21.201672 -9.356534 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5319633468701515 rel_E_err 2.0401883918097995D-12 check gamma integral 4.8038111589243829E-002 max_residual > tol_max_residual 5212 3.3377908967352779D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5212 max_residual > tol_max_residual 5216 3.3174356153224782D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5216 max_residual > tol_max_residual 5219 3.4259690186096127D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5219 5220 8.811808 2.038E+04 -22.677601 3.253666 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 409 -6.6031E+00 8.811808 1.926881 -22.001534 6.230201 -4.996696 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045679 3.253666 -21.201671 -9.356596 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5316675041363021 rel_E_err 1.9819248092463449D-12 check gamma integral 4.8038115214276360E-002 max_residual > tol_max_residual 5223 3.4064642438814741D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5223 max_residual > tol_max_residual 5226 3.5091669060681119D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5226 max_residual > tol_max_residual 5230 3.4905061892870959D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5230 5230 8.811808 2.038E+04 -22.677367 3.253681 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 412 -6.7144E+00 8.811808 1.926959 -22.001534 6.230201 -4.996721 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045687 3.253681 -21.201670 -9.356652 49.017977 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5313734289773322 rel_E_err 1.9470950640643868D-12 check gamma integral 4.8038118432639894E-002 max_residual > tol_max_residual 5233 3.5872667593701724D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5233 max_residual > tol_max_residual 5237 3.5695374138817924D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5237 5240 8.811808 2.038E+04 -22.677186 3.253694 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 414 -6.5246E+00 8.811808 1.927029 -22.001534 6.230201 -4.996742 49.084165 0.000000 0.048233 0.896691 0.592147 16 2.8821E+05 4.114542 6.045693 3.253694 -21.201669 -9.356701 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5310788779534876 rel_E_err 2.0381018147326685D-12 check gamma integral 4.8038121279994572E-002 max_residual > tol_max_residual 5241 3.5514649999662716D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5241 max_residual > tol_max_residual 5244 3.6443851539674187D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5244 max_residual > tol_max_residual 5248 3.6272630474401039D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5248 5250 8.811808 2.038E+04 -22.677009 3.253705 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 417 -6.6359E+00 8.811808 1.927091 -22.001534 6.230201 -4.996762 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045698 3.253705 -21.201668 -9.356745 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5307836652368234 rel_E_err 1.9978148747741558D-12 save photos/x250 for model 5250 check gamma integral 4.8038123801840860E-002 max_residual > tol_max_residual 5251 3.7142825997519023D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5251 max_residual > tol_max_residual 5255 3.6981464639610877D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5255 max_residual > tol_max_residual 5258 3.7793269238210331D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5258 5260 8.811808 2.038E+04 -22.676866 3.253715 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 420 -6.7472E+00 8.811808 1.927142 -22.001534 6.230201 -4.996779 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045703 3.253715 -21.201668 -9.356781 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5304874352472426 rel_E_err 2.0003829659983355D-12 check gamma integral 4.8038125897661911E-002 max_residual > tol_max_residual 5262 3.7641898873060686D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5262 max_residual > tol_max_residual 5265 3.8396861592537815D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5265 max_residual > tol_max_residual 5269 3.8255380835874181D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5269 5270 8.811808 2.038E+04 -22.676103 3.253723 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 423 -6.8584E+00 8.811808 1.927188 -22.001534 6.230201 -4.996794 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045707 3.253723 -21.201667 -9.356813 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5301939781309901 rel_E_err 2.0838459473246902D-12 check gamma integral 4.8038127765434771E-002 max_residual > tol_max_residual 5272 3.8955322744497652D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5272 max_residual > tol_max_residual 5275 3.9585064809995872D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5275 max_residual > tol_max_residual 5279 3.9466122409999214D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5279 5280 8.811808 2.038E+04 -22.676631 3.253730 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 426 -6.9697E+00 8.811808 1.927224 -22.001534 6.230201 -4.996806 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045710 3.253730 -21.201667 -9.356837 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5299001807415866 rel_E_err 1.9840113802943789D-12 check gamma integral 4.8038129210357917E-002 max_residual > tol_max_residual 5282 4.0046077946445699D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5282 max_residual > tol_max_residual 5286 3.9935844645249366D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5286 max_residual > tol_max_residual 5289 4.0469034492588089D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5289 5290 8.811808 2.038E+04 -22.676553 3.253735 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 429 -7.0810E+00 8.811808 1.927253 -22.001534 6.230201 -4.996816 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045712 3.253735 -21.201667 -9.356858 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5296075070118142 rel_E_err 2.0002224591610874D-12 check gamma integral 4.8038130409921199E-002 max_residual > tol_max_residual 5292 4.0943582617885207D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5292 max_residual > tol_max_residual 5296 4.0852980340409017D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5296 max_residual > tol_max_residual 5299 4.1286918717104784D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5299 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5300 8.811808 2.038E+04 -22.676489 3.253739 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 432 -7.1923E+00 8.811808 1.927276 -22.001534 6.230201 -4.996824 49.084165 0.000000 0.048233 0.896691 0.592147 16 2.8821E+05 4.114542 6.045714 3.253739 -21.201666 -9.356874 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5293174782387240 rel_E_err 2.0289529853604911D-12 save LOGS/profile39.data for model 5300 save photos/x300 for model 5300 check gamma integral 4.8038131337270619E-002 max_residual > tol_max_residual 5302 4.1670949487649156D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5302 max_residual > tol_max_residual 5305 4.2009647011222763D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5305 max_residual > tol_max_residual 5308 4.2307705863745153D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5308 max_residual > tol_max_residual 5310 4.2840277681930106D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5310 5310 8.811808 2.038E+04 -22.676447 3.253742 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 436 -7.6046E+00 8.811808 1.927290 -22.001534 6.230201 -4.996829 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045715 3.253742 -21.201666 -9.356884 49.017977 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5290242870887765 rel_E_err 2.0218907329336209D-12 check gamma integral 4.8038131934861762E-002 max_residual > tol_max_residual 5312 4.3234165294246757D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5312 max_residual > tol_max_residual 5312 4.3748834968226610D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5312 max_residual > tol_max_residual 5313 4.3961490791969003D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5313 max_residual > tol_max_residual 5318 4.3886282727713742D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5318 5320 8.811808 2.038E+04 -22.676439 3.253743 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193849 1428 440 -8.0169E+00 8.811808 1.927293 -22.001534 6.230201 -4.996831 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045715 3.253743 -21.201666 -9.356886 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5287330152794247 rel_E_err 2.0618566607371476D-12 check gamma integral 4.8038132060302559E-002 residual_norm > tol_residual_norm 5323 7.4130860275408971D-05 9.9999999999999995D-07 max_residual > tol_max_residual 5323 3.8519504022673505D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5323 max_residual > tol_max_residual 5330 4.3417965509823131D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5330 5330 8.811808 2.038E+04 -22.676398 3.253743 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 442 -7.8271E+00 8.811808 1.927298 -22.001534 6.230201 -4.996832 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045716 3.253743 -21.201666 -9.356889 49.017977 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5284397734642967 rel_E_err 1.9838508739351031D-12 check gamma integral 4.8038132239643365E-002 max_residual > tol_max_residual 5337 4.2766122006720100D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5337 5340 8.811808 2.038E+04 -22.676399 3.253745 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 443 -7.3364E+00 8.811808 1.927307 -22.001534 6.230201 -4.996835 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045716 3.253745 -21.201666 -9.356896 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5281479384148424 rel_E_err 2.0005434702176249D-12 check gamma integral 4.8038132628788928E-002 max_residual > tol_max_residual 5344 4.1659062391055851D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5344 5350 8.811808 2.037E+04 -22.676329 3.253750 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 444 -6.8456E+00 8.811808 1.927332 -22.001534 6.230201 -4.996842 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045719 3.253750 -21.201666 -9.356913 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5278564591982384 rel_E_err 1.9777516557430935D-12 save photos/x350 for model 5350 check gamma integral 4.8038133623049241E-002 5360 8.811808 2.037E+04 -22.675022 3.253774 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1428 444 -6.0538E+00 8.811808 1.927464 -22.001534 6.230202 -4.996877 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045730 3.253774 -21.201664 -9.357006 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5275587941814672 rel_E_err 2.0875375763978949D-12 check gamma integral 4.8038139014016386E-002 residual_norm > tol_residual_norm 5368 1.2116728713155263D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5368 5.5471951735395063D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5368 5370 8.811808 2.036E+04 -22.663491 3.253888 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1427 445 -5.5630E+00 8.811808 1.928074 -22.001534 6.230203 -4.997061 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045780 3.253888 -21.201657 -9.357430 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5272622777403662 rel_E_err 2.0735735705783065D-12 check gamma integral 4.8038163844858345E-002 residual_norm > tol_residual_norm 5372 1.1827419647397512D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5372 5.3843804554778836D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5372 residual_norm > tol_residual_norm 5376 1.1504327668204919D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5376 5.2254152731905167D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5376 residual_norm > tol_residual_norm 5380 1.1228867074574971D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5380 5.0701551188134991D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5380 5380 8.811808 2.034E+04 -22.672059 3.254036 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1432 448 -5.6743E+00 8.811808 1.928864 -22.001534 6.230204 -4.997330 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114542 6.045845 3.254036 -21.201649 -9.357979 49.017977 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5269637780334984 rel_E_err 2.0649062518988959D-12 check gamma integral 4.8038195879466637E-002 residual_norm > tol_residual_norm 5384 1.9954716016805118D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5384 6.1828342627136851D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5384 residual_norm > tol_residual_norm 5388 1.9528596008632760D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5388 6.0705600957333440D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5388 5390 8.811809 2.032E+04 -22.669743 3.254197 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193848 1432 450 -5.4845E+00 8.811809 1.929718 -22.001534 6.230206 -4.997603 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114543 6.045915 3.254197 -21.201639 -9.358570 49.017977 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5266653850790801 rel_E_err 2.1042301463564252D-12 check gamma integral 4.8038230363466071E-002 max_residual > tol_max_residual 5392 1.2076628935462864D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5392 max_residual > tol_max_residual 5396 1.3202537687823038D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5396 max_residual > tol_max_residual 5400 1.6015101449203518D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5400 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5400 8.811809 2.030E+04 -22.667165 3.254375 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193847 1429 453 -5.5958E+00 8.811809 1.930648 -22.001535 6.230207 -4.997922 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114543 6.045990 3.254375 -21.201629 -9.359211 49.019161 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5263676352252800 rel_E_err 1.9726154357336700D-12 save LOGS/profile40.data for model 5400 save photos/x400 for model 5400 check gamma integral 4.8038267788457774E-002 max_residual > tol_max_residual 5404 1.5828317375887607D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5404 max_residual > tol_max_residual 5408 1.3768833817096747D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5408 5410 8.811809 2.028E+04 -22.664633 3.254567 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193847 1427 455 -5.4060E+00 8.811809 1.931650 -22.001536 6.230209 -4.998246 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114543 6.046070 3.254567 -21.201617 -9.359899 49.019161 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5260672784072140 rel_E_err 2.0451640144778268D-12 check gamma integral 4.8038307940132731E-002 residual_norm > tol_residual_norm 5412 2.7489220393932529D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5412 4.8511839949598540D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5412 residual_norm > tol_residual_norm 5416 2.2946069571416080D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5416 4.8953302664962839D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5416 residual_norm > tol_residual_norm 5419 1.5028079841016160D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5419 4.3351127661329876D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5419 5420 8.811809 2.025E+04 -22.662010 3.254765 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193847 1430 458 -5.5173E+00 8.811809 1.932669 -22.001537 6.230211 -4.998598 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114544 6.046152 3.254765 -21.201606 -9.360596 49.019161 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5257658848668356 rel_E_err 2.0657087357548300D-12 check gamma integral 4.8038348579209383E-002 max_residual > tol_max_residual 5423 4.2050266404838520D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5423 residual_norm > tol_residual_norm 5427 1.6874897599032926D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5427 5.8844168742281815D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5427 5430 8.811809 2.023E+04 -22.659421 3.254966 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193847 1430 460 -5.3276E+00 8.811809 1.933694 -22.001538 6.230213 -4.998929 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114544 6.046234 3.254966 -21.201595 -9.361294 49.019161 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5254652543628833 rel_E_err 2.0265453256507785D-12 check gamma integral 4.8038389239288305E-002 residual_norm > tol_residual_norm 5431 1.6509301391163788D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5431 5.7779332393318172D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5431 residual_norm > tol_residual_norm 5439 1.2180803944791611D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5439 2.8443957221272586D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5439 residual_norm > tol_residual_norm 5440 2.0809574084895526D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5440 4.2857839641847070D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5440 5440 8.811809 2.020E+04 -22.655585 3.255274 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193846 1430 463 -5.4388E+00 8.811809 1.935241 -22.001541 6.230215 -4.999475 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114544 6.046352 3.255274 -21.201578 -9.362340 49.019161 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5251643380212920 rel_E_err 2.1093662620401092D-12 check gamma integral 4.8038450267160290E-002 residual_norm > tol_residual_norm 5443 2.1939353324084822D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5443 4.6161984781806505D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5443 residual_norm > tol_residual_norm 5447 1.3033871239143872D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5447 5.4659812502277895D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5447 residual_norm > tol_residual_norm 5450 1.7476646875646211D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5450 6.2372554027622040D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5450 5450 8.811809 2.017E+04 -22.652911 3.255498 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193846 1430 466 -5.5501E+00 8.811809 1.936358 -22.001543 6.230217 -4.999862 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114545 6.046441 3.255498 -21.201565 -9.363093 49.019161 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5248599059306569 rel_E_err 2.0637826217251477D-12 save photos/x450 for model 5450 check gamma integral 4.8038494051326361E-002 max_residual > tol_max_residual 5454 3.8161906158500673D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5454 max_residual > tol_max_residual 5458 1.7438692774208710D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5458 5460 8.811809 2.015E+04 -22.650473 3.255711 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193845 1429 468 -5.3604E+00 8.811809 1.937405 -22.001546 6.230219 -5.000206 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114545 6.046522 3.255711 -21.201554 -9.363795 49.020504 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5245598645544911 rel_E_err 2.1541473315855711D-12 check gamma integral 4.8038534844627098E-002 residual_norm > tol_residual_norm 5462 1.3807001799382515D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5462 5.8848067591973863D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5462 residual_norm > tol_residual_norm 5466 1.3487201954269501D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5466 5.7765620352362552D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5466 5470 8.811810 2.012E+04 -22.647681 3.255962 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193845 1429 470 -5.1706E+00 8.811810 1.938630 -22.001549 6.230221 -5.000611 49.084165 0.000000 0.048233 0.896691 0.592147 15 2.8821E+05 4.114545 6.046613 3.255962 -21.201540 -9.364611 49.020504 0.000004 0.000000 0.436111 0.000E+00 solver log_rel_run_E_err -7.5242613291962464 rel_E_err 2.1162679645162086D-12 check gamma integral 4.8038582430123405E-002 max_residual > tol_max_residual 5472 1.8860311217548956D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5472 residual_norm > tol_residual_norm 5476 1.7922916036086634D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5476 4.4560369779075397D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5476 residual_norm > tol_residual_norm 5480 2.0360254203157040D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5480 3.7987389547845467D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5480 5480 8.811810 2.008E+04 -22.643625 3.256323 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193845 1429 473 -5.2819E+00 8.811810 1.940360 -22.001555 6.230224 -5.001238 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114546 6.046742 3.256323 -21.201521 -9.365756 49.020504 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5239518055600811 rel_E_err 2.1048720352416928D-12 check gamma integral 4.8038649156380682E-002 max_residual > tol_max_residual 5484 2.2105774116336869D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5484 max_residual > tol_max_residual 5487 2.0615212344329774D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5487 5490 8.811810 2.004E+04 -22.640113 3.256689 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193844 1427 475 -5.0921E+00 8.811810 1.942096 -22.001561 6.230227 -5.001823 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114546 6.046864 3.256689 -21.201502 -9.359220 49.020504 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5236354101721687 rel_E_err 2.1615305310771581D-12 check gamma integral 4.8038715305128328E-002 max_residual > tol_max_residual 5491 2.0481380543625912D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5491 max_residual > tol_max_residual 5495 2.0356968328909365D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5495 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 5500 8.811810 2.000E+04 -22.636171 3.257099 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193844 1430 477 -4.9024E+00 8.811810 1.943989 -22.001569 6.230230 -5.002479 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114547 6.047000 3.257099 -21.201481 -9.369644 49.021670 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5233151079357174 rel_E_err 2.2931451929204122D-12 save LOGS/profile41.data for model 5500 save photos/x500 for model 5500 check gamma integral 4.8038787554427684E-002 residual_norm > tol_residual_norm 5501 1.1241210681473642D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5501 2.3125353300149552D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5501 max_residual > tol_max_residual 5507 2.1119691727472717D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5507 max_residual > tol_max_residual 5508 3.7471472629737559D-02 1.0000000000000000D-03 retry: max resid -- give up in solver 5508 5510 8.811810 1.994E+04 -22.630857 3.257692 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193843 1432 480 -5.0137E+00 8.811810 1.946675 -22.001583 6.230235 -5.003486 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114548 6.047183 3.257692 -21.201452 -9.371347 49.021670 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5229965456311092 rel_E_err 2.1714818194296210D-12 check gamma integral 4.8038888690804610E-002 residual_norm > tol_residual_norm 5511 1.1011227625967880D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5511 4.3357698118714511D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5511 residual_norm > tol_residual_norm 5514 1.0708240857229769D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5514 4.9970829659302871D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5514 residual_norm > tol_residual_norm 5518 1.0490814098654018D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5518 4.9124493516344070D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5518 residual_norm > tol_residual_norm 5520 3.0343993372047106D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5520 6.3358074217031643D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5520 5520 8.811811 1.991E+04 -22.627999 3.258031 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193842 1429 484 -5.4260E+00 8.811811 1.948187 -22.001591 6.230237 -5.004088 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114548 6.047288 3.258031 -21.201435 -9.372300 49.021670 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5226832486693178 rel_E_err 2.0435587433071838D-12 check gamma integral 4.8038945027213960E-002 residual_norm > tol_residual_norm 5524 2.5691904674581539D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5524 6.1314445013809962D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5524 residual_norm > tol_residual_norm 5529 1.1459434157020054D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5529 5.4159720330758845D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5529 5530 8.811811 1.988E+04 -22.625583 3.258331 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193842 1429 486 -5.2362E+00 8.811811 1.949501 -22.001599 6.230240 -5.004553 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114549 6.047377 3.258331 -21.201421 -9.373122 49.022498 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5223685292429634 rel_E_err 2.1979652194835000D-12 check gamma integral 4.8038993752068979E-002 residual_norm > tol_residual_norm 5531 3.2445445484968914D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5531 6.8675184825920527D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5531 residual_norm > tol_residual_norm 5535 3.1615033455257952D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5535 6.6439091211353024D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5535 residual_norm > tol_residual_norm 5539 2.6800763831259872D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5539 6.4276325734422407D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5539 5540 8.811811 1.986E+04 -22.623657 3.258578 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193842 1429 489 -5.3475E+00 8.811811 1.950576 -22.001606 6.230242 -5.004960 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114549 6.047450 3.258578 -21.201409 -9.373792 49.022498 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5220631931385764 rel_E_err 2.1860877802264126D-12 check gamma integral 4.8039033375965219E-002 residual_norm > tol_residual_norm 5542 2.8611360080945519D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5542 7.4316204481919210D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5542 residual_norm > tol_residual_norm 5546 2.7769316527117034D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5546 7.1878868932958584D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5546 residual_norm > tol_residual_norm 5550 2.8601420496901412D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5550 6.9521097824527964D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5550 5550 8.811811 1.983E+04 -22.621877 3.258813 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193841 1429 492 -5.4588E+00 8.811811 1.951591 -22.001613 6.230243 -5.005346 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114549 6.047517 3.258813 -21.201398 -9.374421 49.022498 0.000004 0.000000 0.436111 0.000E+00 retry log_rel_run_E_err -7.5217622175629835 rel_E_err 2.0324838003361609D-12 save photos/x550 for model 5550 check gamma integral 4.8039070630889823E-002 residual_norm > tol_residual_norm 5553 3.0580777372426707D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5553 8.0342242273015868D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5553 residual_norm > tol_residual_norm 5557 2.9682466439669895D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5557 7.7692804549036626D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5557 5560 8.811811 1.981E+04 -22.620236 3.259037 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193841 1430 494 -5.2690E+00 8.811811 1.952545 -22.001620 6.230245 -5.005684 49.084165 0.000000 0.048233 0.896691 0.592147 13 2.8821E+05 4.114550 6.047580 3.259037 -21.201388 -9.375009 49.023321 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5214677150646878 rel_E_err 2.0451637373248799D-12 check gamma integral 4.8039105511302034E-002 residual_norm > tol_residual_norm 5561 2.8768565009015705D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5561 7.5130590991140694D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5561 residual_norm > tol_residual_norm 5566 2.5792634690257366D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5566 6.0788027691971211D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5566 residual_norm > tol_residual_norm 5568 3.1668318546323173D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5568 8.3963886582816380D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5568 5570 8.811811 1.979E+04 -22.618593 3.259267 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193841 1431 497 -5.3803E+00 8.811811 1.953517 -22.001627 6.230247 -5.006061 49.084165 0.000000 0.048233 0.896691 0.592147 12 2.8821E+05 4.114550 6.047643 3.259267 -21.201378 -9.375606 49.023321 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5211741019479010 rel_E_err 2.0377804602570130D-12 check gamma integral 4.8039140987612805E-002 residual_norm > tol_residual_norm 5572 3.0782319338384793D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5572 8.1182067576747979D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5572 residual_norm > tol_residual_norm 5576 2.9867523574930170D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5576 7.8492044531225047D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5576 5580 8.811811 1.977E+04 -22.616814 3.259502 49.084165 0.000000 0.000000 0.000000 0.103309 -3.193841 1428 499 -5.1905E+00 8.811811 1.954499 -22.001635 6.230248 -5.006411 49.084165 0.000000 0.048233 0.896691 0.592147 13 2.8821E+05 4.114550 6.047705 3.259502 -21.201367 -9.376207 49.023321 0.000004 0.000000 0.436111 0.000E+00 max increase log_rel_run_E_err -7.5208719214889790 rel_E_err 2.0795119291021908D-12 check gamma integral 4.8039176609528361E-002 residual_norm > tol_residual_norm 5581 2.6859212325707642D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5581 6.3503926430882193D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5581 residual_norm > tol_residual_norm 5583 3.2901264111438294D-06 9.9999999999999995D-07 max_residual > tol_max_residual 5583 8.7675762962756990D-02 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 5583 num_retries 501 max_number_retries 500 stopping because of problems -- too many retries terminated evolution: hydro_failed termination code: max_number_retries runtime (minutes), retries, steps 83.08 501 5583 DATE: 2026-11-10 TIME: 07:22:24 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************