DATE: 2025-09-19 TIME: 05:53:51 run inlist_pulses_header DATE: 2025-09-19 TIME: 05:53:51 reading user weak rate file /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/rate_tables/S13_r_be7_wk_li7.h5 version_number 30e57e2 WARNING: Failed to find colors namelist in file: inlist read inlist_pulses read inlist_ppisn read inlist_extra The terminal output contains the following information 'step' is the number of steps since the start of the run, 'lg_dt' is log10 timestep in years, 'age_yr' is the simulated years since the start run, 'lg_Tcntr' is log10 center temperature (K), 'lg_Dcntr' is log10 center density (g/cm^3), 'lg_Tmax' is log10 max temperature (K), 'Teff' is the surface temperature (K), 'lg_R' is log10 surface radius (Rsun), 'lg_L' is log10 surface luminosity (Lsun), 'lg_LH' is log10 total PP and CNO hydrogen burning power (Lsun), 'lg_L3a' is log10 total triple-alpha helium burning power (Lsun), 'lg_gsurf' is log10 surface gravity, 'lg_Lnuc' is log10 nuclear power (Lsun), 'lg_Lneu' is log10 total neutrino power (Lsun), 'lg_Lphoto' is log10 total photodisintegration (Lsun), 'Mass' is the total stellar baryonic mass (Msun), 'lg_Mdot' is log10 magnitude of rate of change of mass (Msun/year), 'lg_Dsurf' is log10 surface density (g/cm^3), 'H_env' is the amount of mass where H is dominant, 'He_core' is the largest mass where He is dominant. 'CO_core' is the largest mass where CO is dominant. 'H_cntr' is the center H1 mass fraction, 'He_cntr' is the center He4 mass fraction, 'C_cntr' is the center C12 mass fraction, 'N_cntr' is the center N14 mass fraction, 'O_cntr' is the center O16 mass fraction, 'Ne_cntr' is the center Ne20 mass fraction, 'gam_cntr' is the center plasma interaction parameter, 'eta_cntr' is the center electron degeneracy parameter, 'zones' is the number of zones in the current model, 'iters' is the number of solver iterations for the current step, 'retry' is the number of step retries required during the run, 'dt_limit' is an indication of what limited the timestep. All this and more are saved in the LOGS directory during the run. load saved model he_dep.mod set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 create rate data for r1216_to_mg24 create rate data for r1216_to_si28 create rate data for ral27pa_aux create rate data for ral27pg_aux create rate data for rmg24ap_aux create rate data for rmg24ap_to_si28 create rate data for rmg24gp_aux create rate data for rmg24gp_to_ne20 create rate data for rne20gp_aux create rate data for rne20gp_to_o16 create rate data for ro16gp_to_c12 create rate data for rsi28gp_aux create rate data for rsi28gp_to_mg24 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r1216_to_mg24_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r1216_to_si28_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/ral27pa_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/ral27pg_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rmg24ap_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rmg24ap_to_si28_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rmg24gp_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rmg24gp_to_ne20_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rne20gp_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rne20gp_to_o16_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/ro16gp_to_c12_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rsi28gp_aux_1.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/rsi28gp_to_mg24_1.bin set special rate factor for r_c12_ag_o16 1 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 10 1.0000000000000000 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/eosDT_data/cache/mesa-FreeEOS_70z00x.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/eosDT_data/cache/mesa-FreeEOS_80z00x_CO.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/gs98_co_z0.001_x0.0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/gs98_co_z0.001_x0.03.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/gs98_co_z0.004_x0.0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/gs98_co_z0.004_x0.03.bin set_initial_number_retries 0 new_v_flag T new_w_div_wc_flag T setting w_div_wc flag T new_rotation_flag T net name co_burn.net v_flag T rotation_flag T w_div_wc_flag T set_cumulative_energy_error 0.0000000000000000D+00 kap_option gs98 kap_CO_option gs98_co kap_lowT_option lowT_fa05_gs98 OMP_NUM_THREADS 64 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ save LOGS/profile1.data for model 1578 1580 8.552300 1.571E+05 -13.259668 6.201394 51.891032 0.000000 0.000000 0.000000 0.224541 -4.771204 2680 0 2.0896E+00 8.552300 0.329328 0.743436 4.146266 -99.000000 51.891032 0.000446 0.800793 0.775459 0.153351 4 2.8410E+05 3.007828 6.398204 6.201392 -52.386747 -8.730420 49.084165 0.153191 0.039932 0.000000 -0.752E-08 lgRho_cntr log_rel_run_E_err -10.9789496950442693 rel_E_err 1.0496640057054846D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.9144870930830864E-002 1590 8.578522 1.611E+05 -15.525254 5.381695 51.891032 0.000000 0.000000 0.000000 0.224541 -4.686281 2680 0 1.2421E+00 8.578522 0.309657 -3.455829 4.339879 -99.000000 51.891032 0.000013 0.799875 0.775459 0.153736 5 2.8455E+05 3.086804 6.402565 5.381695 -47.673507 -8.734023 49.084165 0.152946 0.041287 0.000000 -0.182E-07 lg_XHe_cntr log_rel_run_E_err -10.9805774647919971 rel_E_err 1.0457371464498486D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8868636448578667E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1600 8.587271 1.625E+05 -16.876562 4.348124 51.891032 0.000000 0.000000 0.000000 0.224540 -4.657955 2680 0 9.2773E-01 8.587271 0.303116 -6.904905 4.404364 -99.000000 51.891032 0.000001 0.799842 0.775460 0.153762 4 2.8466E+05 3.113186 6.403968 4.348124 -46.166268 -8.732859 49.084165 0.152941 0.041331 0.000000 -0.184E-07 max increase log_rel_run_E_err -10.9858447811304210 rel_E_err 1.0331305854649140D-11 save LOGS/profile2.data for model 1600 save photos/x600 for model 1600 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8776285259291334E-002 1610 8.603236 1.649E+05 -18.545742 0.874226 51.891032 0.000000 0.000000 0.000000 0.224540 -4.606339 2682 0 1.2858E+00 8.603236 0.291662 -6.643574 4.521972 -99.000000 51.891032 0.000000 0.799840 0.775460 0.153793 3 2.8484E+05 3.161342 6.406618 0.874226 -43.492411 -8.730082 49.084165 0.152941 0.041333 0.000000 -0.163E-07 lgRho_cntr log_rel_run_E_err -10.9870322734592225 rel_E_err 1.0303095528353914D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8604181898845772E-002 1620 8.621416 1.675E+05 -20.324220 -0.379772 51.891032 0.000000 0.000000 0.000000 0.224540 -4.547701 2792 0 1.2910E+00 8.621416 0.279487 -5.948593 4.655973 -99.000000 51.891032 0.000000 0.799840 0.775460 0.153830 4 2.8505E+05 3.216194 6.409787 -0.379773 -40.562598 -8.727060 49.084165 0.152941 0.041333 0.000000 -0.139E-07 lgRho_cntr log_rel_run_E_err -10.9767334738322457 rel_E_err 1.0550341713615261D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8401745990022518E-002 1630 8.640503 1.709E+05 -20.480158 -0.009719 51.886181 0.000000 0.000000 0.000000 0.224130 -4.486251 2868 0 1.4600E+00 8.640503 0.261368 -5.251038 4.797138 -4.178206 51.886181 0.000000 0.799840 0.775870 0.153874 5 2.8528E+05 3.273823 6.408760 -0.009721 -37.612927 -8.679629 49.084165 0.152941 0.041333 0.000000 -0.172E-07 lgRho_cntr log_rel_run_E_err -10.9735497051942588 rel_E_err 1.0627969387381116D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.8183611687654337E-002 1640 8.658923 1.739E+05 -20.380830 0.340606 51.870759 0.000000 0.000000 0.000000 0.222905 -4.426868 2924 0 1.3969E+00 8.658923 0.247876 -4.614625 4.934651 -4.172977 51.870759 0.000000 0.799840 0.777095 0.153930 5 2.8551E+05 3.329561 6.411219 0.340602 -34.884067 -8.663767 49.084165 0.152941 0.041333 0.000000 -0.125E-07 lgRho_cntr log_rel_run_E_err -10.9663842026799916 rel_E_err 1.0804776736791063D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7969937250854494E-002 1650 8.677183 1.765E+05 -19.331222 0.683060 51.854960 0.000000 0.000000 0.000000 0.221454 -4.367887 2919 0 1.3647E+00 8.677183 0.236127 -4.008088 5.073990 -4.166989 51.854960 0.000000 0.799840 0.778546 0.154003 5 2.8574E+05 3.384957 6.413989 0.683051 -32.287876 -8.651894 49.084165 0.152941 0.041333 0.000000 -0.107E-07 lgRho_cntr log_rel_run_E_err -10.9746685251669156 rel_E_err 1.0600625081458276D-11 save photos/x650 for model 1650 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7750740115445056E-002 1660 8.695255 1.790E+05 -19.264632 1.017259 51.838878 0.000000 0.000000 0.000000 0.220468 -4.309262 2929 0 1.3688E+00 8.695255 0.225319 -3.430923 5.217951 -4.160973 51.838878 0.000000 0.799840 0.779532 0.154098 5 2.8598E+05 3.439981 6.416834 1.017243 -29.821093 -8.641287 49.084165 0.152941 0.041333 0.000000 -0.951E-08 lgRho_cntr log_rel_run_E_err -10.9712295177063837 rel_E_err 1.0684900500359192D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7526419649534031E-002 1670 8.711744 1.812E+05 -18.611603 1.318169 51.823904 0.000000 0.000000 0.000000 0.219796 -4.255283 2947 0 1.3286E+00 8.711744 0.216092 -2.923996 5.358958 -4.155382 51.823904 0.000000 0.799840 0.780204 0.154220 5 2.8619E+05 3.490478 6.419467 1.318144 -27.655768 -8.632445 49.084165 0.152941 0.041333 0.000000 -0.863E-08 lgRho_cntr log_rel_run_E_err -10.9786750996227109 rel_E_err 1.0503278964138076D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7315158927393651E-002 1680 8.727992 1.833E+05 -19.043971 1.611219 51.808999 0.000000 0.000000 0.000000 0.219494 -4.201186 2972 0 1.3217E+00 8.727992 0.207500 -2.442195 5.512617 -4.149494 51.808999 0.000000 0.799840 0.780506 0.154396 5 2.8641E+05 3.540709 6.422068 1.611180 -25.598684 -8.624520 49.084165 0.152941 0.041333 0.000000 -0.790E-08 lgRho_cntr log_rel_run_E_err -10.9783908857826731 rel_E_err 1.0510154838399761D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.7100623293118607E-002 1690 8.744082 1.852E+05 -19.120454 1.898129 51.794314 0.000000 0.000000 0.000000 0.219347 -4.145880 2981 0 1.3039E+00 8.744082 0.199457 -1.982119 5.685384 -4.143587 51.794314 0.000000 0.799840 0.780653 0.154669 4 2.8661E+05 3.591280 6.424628 1.898072 -23.633545 -8.617438 49.084165 0.152941 0.041333 0.000000 -0.745E-08 lgRho_cntr log_rel_run_E_err -10.9739053616350102 rel_E_err 1.0619269395539283D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6881684541660994E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1700 8.759899 1.871E+05 -18.426458 2.176472 51.780332 0.000000 0.000000 0.000000 0.219217 -4.088400 2988 0 1.2680E+00 8.759899 0.191934 -1.546292 5.879986 -4.138049 51.780332 0.000000 0.799839 0.780783 0.155107 4 2.8680E+05 3.642414 6.427102 2.176390 -21.768789 -8.611015 49.084165 0.152941 0.041333 0.000000 -0.736E-08 lgRho_cntr log_rel_run_E_err -10.9814580649333866 rel_E_err 1.0436188987226912D-11 save LOGS/profile3.data for model 1700 save photos/x700 for model 1700 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6659835777108735E-002 1710 8.775281 1.889E+05 -19.282885 2.442285 51.767711 0.000000 0.000000 0.000000 0.219020 -4.027497 2998 0 1.2051E+00 8.775281 0.184835 -1.138107 6.094014 -4.132950 51.767711 0.000000 0.799839 0.780980 0.155802 4 2.8698E+05 3.694379 6.429429 2.442171 -20.016297 -8.604658 49.084165 0.152941 0.041334 0.000000 -0.789E-08 lgRho_cntr log_rel_run_E_err -10.9795690132721901 rel_E_err 1.0481682170544201D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6437351596740693E-002 1720 8.790067 1.906E+05 -19.212134 2.693205 51.757107 0.000000 0.000000 0.000000 0.218718 -3.962092 3001 0 1.1089E+00 8.790067 0.177981 -0.760332 6.320073 -4.128319 51.757107 0.000000 0.799839 0.781282 0.156837 4 2.8712E+05 3.747364 6.431548 2.693053 -18.386095 -8.597391 49.084165 0.152940 0.041335 0.000000 -0.942E-08 lgRho_cntr log_rel_run_E_err -10.9736978021604674 rel_E_err 1.0624345805335293D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.6216734693326343E-002 1730 8.804175 1.924E+05 -18.848229 2.936181 51.748869 0.000000 0.000000 0.000000 0.218358 -3.891895 2995 0 9.7968E-01 8.804175 0.171143 -0.412981 6.549532 -4.124274 51.748869 0.000000 0.799837 0.781642 0.158247 4 2.8723E+05 3.801345 6.433422 2.935986 -16.878503 -8.588250 49.084165 0.152938 0.041339 0.000000 -0.126E-07 lgRho_cntr log_rel_run_E_err -10.9868033904432156 rel_E_err 1.0308526923868984D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5999496269874957E-002 1740 8.817647 1.941E+05 -19.118138 3.189902 51.742899 0.000000 0.000000 0.000000 0.218023 -3.817564 3004 0 8.2461E-01 8.817647 0.164114 -0.092601 6.776388 -4.120816 51.742899 0.000000 0.799834 0.781977 0.159998 4 2.8731E+05 3.856098 6.435055 3.189675 -15.481123 -8.576607 49.084165 0.152933 0.041347 0.000000 -0.183E-07 lgRho_cntr log_rel_run_E_err -10.9758623953147900 rel_E_err 1.0571524111927605D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5785226320980227E-002 1750 8.830619 1.959E+05 -19.376660 3.472761 51.738780 0.000000 0.000000 0.000000 0.217751 -3.740244 3011 0 6.5285E-01 8.830619 0.156778 0.206248 6.998143 -4.117836 51.738780 0.000000 0.799827 0.782249 0.162018 4 2.8736E+05 3.911345 6.436477 3.472526 -14.173882 -8.562303 49.084165 0.152923 0.041363 0.000000 -0.280E-07 lgRho_cntr log_rel_run_E_err -10.9979119270058519 rel_E_err 1.0048195425629336D-11 save photos/x750 for model 1750 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5571790625613284E-002 1760 8.843250 1.978E+05 -19.819421 3.791246 51.736023 0.000000 0.000000 0.000000 0.217551 -3.661059 3022 0 4.7182E-01 8.843250 0.149080 0.488998 7.214516 -4.115280 51.736023 0.000000 0.799815 0.782449 0.164228 4 2.8740E+05 3.966863 6.437731 3.791029 -12.936394 -8.545429 49.084165 0.152904 0.041394 0.000000 -0.439E-07 lgRho_cntr log_rel_run_E_err -10.9920161775036416 rel_E_err 1.0185534461513937D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5356174140899583E-002 1770 8.855678 1.998E+05 -19.668753 4.141169 51.734206 0.000000 0.000000 0.000000 0.217415 -3.580881 3033 0 2.8641E-01 8.855678 0.141019 0.760001 7.426052 -4.113019 51.734206 0.000000 0.799794 0.782585 0.166565 4 2.8742E+05 4.022505 6.438851 4.140988 -11.752117 -8.526225 49.084165 0.152871 0.041448 0.000000 -0.691E-07 lgRho_cntr log_rel_run_E_err -10.9969192661895612 rel_E_err 1.0071188712925751D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.5135121761535606E-002 1780 8.868008 2.018E+05 -19.694435 4.514075 51.733018 0.000000 0.000000 0.000000 0.217322 -3.500320 3039 0 9.9568E-02 8.868008 0.132618 1.022356 7.633389 -4.111033 51.733018 0.000000 0.799756 0.782678 0.168982 4 2.8744E+05 4.078184 6.439869 4.513935 -10.609121 -8.505033 49.084165 0.152814 0.041542 0.000000 -0.109E-06 lgRho_cntr log_rel_run_E_err -10.9981700892603644 rel_E_err 1.0042224145686796D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4905347851442408E-002 1790 8.880316 2.040E+05 -19.721839 4.901865 51.732241 0.000000 0.000000 0.000000 0.217259 -3.419789 3051 0 -8.6961E-02 8.880316 0.123907 1.278145 7.837016 -4.109257 51.732241 0.000000 0.799692 0.782741 0.171448 4 2.8745E+05 4.133848 6.440807 4.901762 -9.499249 -8.482197 49.084165 0.152716 0.041703 0.000000 -0.170E-06 lgRho_cntr log_rel_run_E_err -10.9967527335842750 rel_E_err 1.0075051306092145D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4663466688494934E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1800 8.892653 2.062E+05 -20.275741 5.298540 51.731733 0.000000 0.000000 0.000000 0.217217 -3.339565 3056 0 -2.7210E-01 8.892653 0.114922 1.528737 8.037264 -4.107648 51.731733 0.000000 0.799581 0.782783 0.173946 4 2.8746E+05 4.189463 6.441682 5.298466 -8.416951 -8.458062 49.084165 0.152547 0.041979 0.000000 -0.264E-06 lgRho_cntr log_rel_run_E_err -11.0029708672562769 rel_E_err 9.9318266949706524D-12 save LOGS/profile4.data for model 1800 save photos/x800 for model 1800 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4405811008642229E-002 1810 8.905055 2.085E+05 -19.608980 5.700196 51.731400 0.000000 0.000000 0.000000 0.217189 -3.259842 3067 0 -4.5515E-01 8.905055 0.105701 1.775047 8.234352 -4.106206 51.731400 0.000000 0.799393 0.782811 0.176467 4 2.8746E+05 4.245010 6.442508 5.700144 -7.358227 -8.432936 49.084165 0.152261 0.042450 0.000000 -0.407E-06 lgRho_cntr log_rel_run_E_err -10.9949902727759312 rel_E_err 1.0116021116286203D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.4128215131550061E-002 1820 8.917552 2.109E+05 -19.361460 6.104453 51.731179 0.000000 0.000000 0.000000 0.217170 -3.180776 3074 0 -6.3559E-01 8.917552 0.096273 2.017729 8.428449 -4.104898 51.731179 0.000000 0.799073 0.782830 0.179013 4 2.8746E+05 4.300471 6.443297 6.104418 -6.319768 -8.407052 49.084165 0.151774 0.043251 0.000001 -0.624E-06 lgRho_cntr log_rel_run_E_err -10.9981379432611508 rel_E_err 1.0042967487567791D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3825781641705426E-002 1830 8.930171 2.133E+05 -18.311715 6.509903 51.731033 0.000000 0.000000 0.000000 0.217158 -3.102515 3082 0 -8.1293E-01 8.930171 0.086658 2.257321 8.619742 -4.103750 51.731033 0.000000 0.798527 0.782842 0.181599 4 2.8746E+05 4.355831 6.444058 6.509878 -5.298179 -8.380359 49.084165 0.150942 0.044617 0.000001 -0.935E-06 lgRho_cntr log_rel_run_E_err -10.9939798831435525 rel_E_err 1.0139583519843503D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3492614498953593E-002 1840 8.942947 2.158E+05 -17.175415 6.915710 51.730935 0.000000 0.000000 0.000000 0.217150 -3.025242 3086 0 -9.8662E-01 8.942947 0.076879 2.494378 8.808496 -4.102719 51.730935 0.000000 0.797594 0.782850 0.184257 4 2.8747E+05 4.411072 6.444804 6.915693 -4.289183 -8.352664 49.084165 0.149521 0.046951 0.000002 -0.140E-05 lgRho_cntr log_rel_run_E_err -10.9995271511850774 rel_E_err 1.0010893675627471D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.3121468759987562E-002 1850 8.955929 2.184E+05 -16.030108 7.321349 51.730869 0.000000 0.000000 0.000000 0.217144 -2.949224 3101 0 -1.1559E+00 8.955929 0.066937 2.729603 8.995137 -4.101729 51.730869 0.000000 0.796000 0.782856 0.187051 4 2.8747E+05 4.466168 6.445545 7.321338 -3.286710 -8.323694 49.084165 0.147091 0.050938 0.000003 -0.207E-05 lgRho_cntr log_rel_run_E_err -11.0037132252214480 rel_E_err 9.9148643040447077D-12 save photos/x850 for model 1850 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2703225432475039E-002 1860 8.969197 2.197E+05 -14.830859 7.726379 51.730864 0.000000 0.000000 0.000000 0.217143 -2.874873 3105 0 -1.3195E+00 8.969197 0.064790 2.964053 9.180372 -99.000000 51.730864 0.000000 0.793284 0.782857 0.190093 3 2.8747E+05 4.521080 6.451765 7.726371 -2.281848 -8.349843 49.084165 0.142941 0.057734 0.000006 -0.257E-05 lgRho_cntr log_rel_run_E_err -11.4397826450256677 rel_E_err -3.6325981294557544D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.2225983444788638E-002 1870 8.982869 2.223E+05 -13.770941 8.129971 51.730864 0.000000 0.000000 0.000000 0.217143 -2.802820 3115 0 -1.4757E+00 8.982869 0.055255 3.199211 9.365292 -99.000000 51.730864 0.000000 0.788696 0.782857 0.193580 3 2.8747E+05 4.575751 6.452808 8.129966 -1.262293 -8.321663 49.084165 0.135907 0.069212 0.000012 -0.401E-05 lgRho_cntr log_rel_run_E_err -11.3940731363406513 rel_E_err -4.0357742373793959D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1673729203112526E-002 1880 8.997111 2.250E+05 -12.672411 8.529895 51.730864 0.000000 0.000000 0.000000 0.217143 -2.733888 3124 0 -1.6226E+00 8.997111 0.045063 3.437225 9.551466 -99.000000 51.730864 0.000000 0.781138 0.782857 0.197831 3 2.8747E+05 4.630120 6.453758 8.529892 -0.213296 -8.289424 49.084165 0.124249 0.088121 0.000024 -0.586E-05 lgRho_cntr log_rel_run_E_err -11.4773519968187276 rel_E_err -3.3315627926632638D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.1024138729540499E-002 set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 create rate data for r_c12_ag_o16 create rate data for r_o16_ga_c12 create rate data for r_c12_to_he4_he4_he4 create rate data for r_he4_he4_he4_to_c12 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_c12_ag_o16_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_o16_ga_c12_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_c12_to_he4_he4_he4_0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/rates_data/cache/r_he4_he4_he4_to_c12_0.bin set special rate factor for r_c12_ag_o16 3 1.0000000000000000 set special rate factor for r_he4_he4_he4_to_c12 24 1.0000000000000000 change to "approx21_plus_co56.net" number of species 22 new net = approx21_plus_co56.net 1890 9.005150 2.266E+05 -15.402688 8.744238 51.730864 0.000000 0.000000 0.000000 0.217143 -2.697827 3127 0 -1.8093E+00 9.005150 0.039329 3.568555 9.653826 -99.000000 51.730864 0.000000 0.775414 0.782857 0.200599 3 2.8747E+05 4.659608 6.454275 8.744235 0.372990 -8.270830 49.084165 0.115358 0.102443 0.000034 -0.714E-05 max increase log_rel_run_E_err -11.7662901890526985 rel_E_err 1.7128124494984281D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 4.0619781566482480E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 1900 9.019956 2.295E+05 -13.494740 9.110872 51.730864 0.000000 0.000000 0.000000 0.217143 -2.636257 3131 0 -1.8293E+00 9.019956 0.028685 3.806503 9.838123 -99.000000 51.730864 0.000000 0.761866 0.782857 0.206606 3 2.8747E+05 4.711878 6.455201 9.110870 1.443492 -8.235775 49.084165 0.094077 0.136343 0.000064 -0.993E-05 lgRho_cntr log_rel_run_E_err -11.7230012186441570 rel_E_err -1.8923383086759233D-12 save LOGS/profile5.data for model 1900 save photos/x900 for model 1900 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.9791969786393287E-002 1910 9.035455 2.326E+05 -12.941051 9.451620 51.730864 0.000000 0.000000 0.000000 0.217143 -2.572991 3114 0 -1.9680E+00 9.035455 0.017388 4.053506 10.027994 -99.000000 51.730864 0.000000 0.745317 0.782857 0.214043 3 2.8747E+05 4.766121 6.456170 9.451619 2.544898 -8.198412 49.084165 0.067580 0.177752 0.000114 -0.137E-04 lgRho_cntr log_rel_run_E_err -12.3619449609924938 rel_E_err -4.3456529401000724D-13 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.8782133713503045E-002 1920 9.050222 2.357E+05 -14.294332 9.734195 51.730864 0.000000 0.000000 0.000000 0.217143 -2.505584 3076 0 -2.1242E+00 9.050222 0.006344 4.290588 10.208792 -99.000000 51.730864 0.000000 0.730682 0.782857 0.221632 3 2.8747E+05 4.820874 6.457122 9.734194 3.565152 -8.162177 49.084165 0.043591 0.214380 0.000176 -0.185E-04 lgRho_cntr log_rel_run_E_err -11.8484965258201189 rel_E_err 1.4174360503115159D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.7644368791234513E-002 1930 9.063817 2.387E+05 -13.025176 9.961710 51.730864 0.000000 0.000000 0.000000 0.217143 -2.433221 3039 0 -2.2850E+00 9.063817 -0.004055 4.510197 10.374896 -99.000000 51.730864 0.000000 0.720609 0.782857 0.228334 3 2.8747E+05 4.875705 6.458034 9.961709 4.465337 -8.128477 49.084165 0.026692 0.239596 0.000235 -0.247E-04 lgRho_cntr log_rel_run_E_err -11.4657847565147915 rel_E_err 3.4214897515581058D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.6421773903821848E-002 1940 9.076541 2.415E+05 -13.713810 10.152070 51.730864 0.000000 0.000000 0.000000 0.217143 -2.357919 3013 0 -2.4382E+00 9.076541 -0.013812 4.714024 10.527841 -99.000000 51.730864 0.000000 0.714451 0.782857 0.233998 3 2.8747E+05 4.930276 6.458916 10.152068 5.265225 -8.097267 49.084165 0.016145 0.255009 0.000282 -0.328E-04 lgRho_cntr log_rel_run_E_err -11.2853964970248040 rel_E_err 5.1832660716998670D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.5124678557313771E-002 1950 9.088823 2.443E+05 -12.055235 10.320360 51.730864 0.000000 0.000000 0.000000 0.217143 -2.281473 2971 0 -2.5823E+00 9.088823 -0.023135 4.906654 10.671312 -99.000000 51.730864 0.000000 0.710800 0.782857 0.238871 3 2.8747E+05 4.984570 6.459786 10.320359 5.997368 -8.067813 49.084165 0.009776 0.264142 0.000318 -0.435E-04 lgRho_cntr log_rel_run_E_err -11.0396261259717861 rel_E_err 9.1279630634267411D-12 save photos/x950 for model 1950 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.3741881435774494E-002 1960 9.100954 2.469E+05 -11.734918 10.475618 51.730864 0.000000 0.000000 0.000000 0.217143 -2.204898 2933 0 -2.7197E+00 9.100954 -0.032163 5.091735 10.808213 -99.000000 51.730864 0.000000 0.708638 0.782857 0.243199 3 2.8747E+05 5.038663 6.460659 10.475616 6.685580 -8.039660 49.079779 0.005933 0.269543 0.000346 -0.575E-04 lgRho_cntr log_rel_run_E_err -10.8745009382248199 rel_E_err 1.3350547053838529D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.2259654466812449E-002 1970 9.113102 2.496E+05 -11.493607 10.622977 51.730864 0.000000 0.000000 0.000000 0.217143 -2.128727 2900 0 -2.8526E+00 9.113102 -0.041046 5.271655 10.940441 -99.000000 51.730864 0.000000 0.707361 0.782857 0.247146 3 2.8747E+05 5.092625 6.461548 10.622975 7.344610 -8.012347 49.079779 0.003601 0.272722 0.000368 -0.760E-04 lgRho_cntr log_rel_run_E_err -10.7365371333127460 rel_E_err 1.8342683256789848D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 3.0667584941021155E-002 1980 9.125364 2.523E+05 -11.838530 10.765522 51.730864 0.000000 0.000000 0.000000 0.217143 -2.053247 2863 0 -2.9826E+00 9.125364 -0.049932 5.447968 11.069232 -99.000000 51.730864 0.000000 0.706644 0.782857 0.250818 3 2.8747E+05 5.146501 6.462461 10.765520 7.983352 -7.985420 49.079779 0.002182 0.274496 0.000390 -0.101E-03 lgRho_cntr log_rel_run_E_err -10.6662710215841106 rel_E_err 2.1563982882615277D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.8959022290028960E-002 1990 9.137797 2.550E+05 -11.208581 10.905349 51.730864 0.000000 0.000000 0.000000 0.217143 -1.978647 2827 0 -3.1106E+00 9.137797 -0.058639 5.621785 11.195459 -99.000000 51.730864 0.000000 0.706375 0.782857 0.254275 3 2.8747E+05 5.200318 6.463402 10.905347 8.607226 -7.959555 49.079779 0.001315 0.275147 0.000419 -0.132E-03 lgRho_cntr log_rel_run_E_err -10.5829523765759319 rel_E_err 2.6124478118468949D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.7130350401358569E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2000 9.150456 2.577E+05 -10.913906 11.044289 51.730864 0.000000 0.000000 0.000000 0.217143 -1.905159 2800 0 -3.2368E+00 9.150456 -0.067318 5.794044 11.319846 -99.000000 51.730864 0.000000 0.706749 0.782857 0.257543 3 2.8747E+05 5.254074 6.464381 11.044287 9.219683 -7.934282 49.079779 0.000787 0.274204 0.000479 -0.175E-03 lgRho_cntr log_rel_run_E_err -10.5384122313753767 rel_E_err 2.8945947402910067D-11 save LOGS/profile6.data for model 2000 save photos/2000 for model 2000 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.5179537684102894E-002 2010 9.163428 2.605E+05 -14.515969 11.184786 51.730864 0.000000 0.000000 0.000000 0.217143 -1.833315 2780 0 -3.3593E+00 9.163428 -0.076142 5.965895 11.443248 -99.000000 51.730864 0.000000 0.708698 0.782857 0.260604 4 2.8747E+05 5.307704 6.465407 11.184783 9.823237 -7.909070 49.079779 0.000464 0.269396 0.000658 -0.231E-03 lgRho_cntr log_rel_run_E_err -11.0117314249816793 rel_E_err 9.7334897308169253D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.3102442349868357E-002 retry: check_lgL_power_photo_change hard limit 2014 2020 9.172750 2.625E+05 -10.660726 11.286727 51.730864 0.000000 0.000000 0.000000 0.217143 -1.784992 2755 1 -3.6868E+00 9.172750 -0.082360 6.086311 11.529367 -99.000000 51.730864 0.000000 0.712342 0.782857 0.262558 3 2.8747E+05 5.344846 6.466161 11.286724 10.239608 -7.891638 49.079779 0.000316 0.260497 0.001028 -0.281E-03lgL_power_phot log_rel_run_E_err -10.8724510702151242 rel_E_err 1.3413710524529896D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.1573698390878193E-002 2030 9.180643 2.641E+05 -10.610559 11.374337 51.730864 0.000000 0.000000 0.000000 0.217143 -1.747372 2740 1 -3.7518E+00 9.180643 -0.087453 6.185972 11.600426 -99.000000 51.730864 0.000000 0.718380 0.782857 0.263981 3 2.8747E+05 5.374898 6.466799 11.374334 10.577390 -7.877569 49.079779 0.000227 0.245926 0.001828 -0.324E-03lgL_power_phot log_rel_run_E_err -10.8867843529158232 rel_E_err 1.2978235397939389D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 2.0266395921710940E-002 2040 9.188757 2.658E+05 -10.314028 11.466023 51.730864 0.000000 0.000000 0.000000 0.217143 -1.713211 2724 1 -3.8101E+00 9.188757 -0.092600 6.285910 11.671466 -99.000000 51.730864 0.000000 0.729316 0.782857 0.265144 3 2.8747E+05 5.403874 6.467464 11.466020 10.905481 -7.863533 49.079779 0.000159 0.220034 0.003921 -0.382E-03lgL_power_phot log_rel_run_E_err -10.8019802992538985 rel_E_err 1.5776828359414119D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.8920855890603289E-002 2050 9.197125 2.675E+05 -9.926110 11.562567 51.730864 0.000000 0.000000 0.000000 0.217143 -1.683824 2697 1 -3.8571E+00 9.197125 -0.097815 6.386339 11.742645 -99.000000 51.730864 0.000000 0.747491 0.782857 0.265976 3 2.8747E+05 5.431265 6.468121 11.562564 11.216994 -7.849341 49.079779 0.000107 0.178457 0.009361 -0.422E-03lgL_power_phot log_rel_run_E_err -10.7632617823845962 rel_E_err 1.7247979114248449D-11 save photos/x050 for model 2050 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.7537391061493501E-002 2060 9.205744 2.692E+05 -9.717595 11.662751 51.730864 0.000000 0.000000 0.000000 0.217143 -1.658618 2685 1 -3.8859E+00 9.205744 -0.103151 6.488343 11.814717 -99.000000 51.730864 0.000000 0.773469 0.782857 0.266568 3 2.8747E+05 5.457309 6.468788 11.662748 11.502481 -7.834898 49.079779 0.000068 0.122481 0.021781 -0.459E-03lgL_power_phot log_rel_run_E_err -10.6338745625543218 rel_E_err 2.3234077702318780D-11 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.6104481358713427E-002 2070 9.215546 2.713E+05 -12.079457 11.773680 51.730864 0.000000 0.000000 0.000000 0.217143 -1.628933 2662 1 -3.7595E+00 9.215546 -0.109550 6.606876 11.898185 -99.000000 51.730864 0.000000 0.805459 0.782857 0.267462 4 2.8747E+05 5.487352 6.469574 11.773677 11.777583 -7.817655 49.079779 0.000035 0.060238 0.045813 -0.521E-03lgL_power_phot log_rel_run_E_err -11.0017497133482074 rel_E_err 9.9597924111117547D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.4409975379492007E-002 2080 9.228422 2.743E+05 -11.825282 11.913275 51.730864 0.000000 0.000000 0.000000 0.217143 -1.573513 2645 1 -3.7884E+00 9.228422 -0.118463 6.771667 12.013583 -99.000000 51.730864 0.000000 0.833277 0.782857 0.269872 4 2.8747E+05 5.533893 6.470670 11.913272 12.059822 -7.793922 49.079779 0.000009 0.014340 0.076679 -0.642E-03 lgRho_cntr log_rel_run_E_err -11.0031234003711980 rel_E_err 9.9283390465678894D-12 Setting energy conservation error to zero until hydro is turned on for the first time check gamma integral 1.2015812490562185E-002 Turning on Riemann hydro! save LOGS/prehydro_prof001.data for model 2088 2090 9.239195 2.757E+05 -10.716156 12.029052 51.730864 0.000000 0.000000 0.000000 0.217143 -1.515134 2656 1 -5.4199E+00 9.239195 -0.127145 6.912995 12.111973 -99.000000 51.730864 0.000000 0.841940 0.782857 0.272621 5 2.8747E+05 5.578040 6.461947 12.029049 12.239425 -7.435488 49.079779 0.000002 0.002355 0.088840 0.460E-02 max increase log_rel_run_E_err -8.3706388798969300 rel_E_err 1.0635441667592985D-11 check gamma integral 9.9396986013072300E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2100 9.240442 2.744E+05 -10.265093 12.044006 51.730864 0.000000 0.000000 0.000000 0.217143 -1.508266 2775 1 -4.8001E+00 9.240442 -0.119196 6.929314 12.123310 -99.000000 51.730864 0.000000 0.842376 0.782857 0.272935 5 2.8747E+05 5.583200 6.469915 12.044003 12.258836 -7.479834 49.079779 0.000001 0.001786 0.089497 0.491E-02 max_dt log_rel_run_E_err -8.3606914935779599 rel_E_err 9.8995092030094871D-12 save LOGS/profile7.data for model 2100 save photos/x100 for model 2100 check gamma integral 9.6991296692884432E-003 2110 9.242347 2.746E+05 -11.893664 12.065442 51.730864 0.000000 0.000000 0.000000 0.217143 -1.497647 2932 1 -4.8001E+00 9.242347 -0.118807 6.953851 12.140357 -99.000000 51.730864 0.000000 0.842889 0.782857 0.273421 5 2.8747E+05 5.591138 6.471725 12.065438 12.285968 -7.486232 49.079779 0.000001 0.001119 0.090283 -0.871E-03 max_dt log_rel_run_E_err -8.3516357080684642 rel_E_err 9.4370363636717852D-12 check gamma integral 9.3370679297550083E-003 2120 9.244327 2.750E+05 -12.011523 12.087109 51.730864 0.000000 0.000000 0.000000 0.217143 -1.486508 3095 1 -4.8001E+00 9.244327 -0.119901 6.979215 12.157973 -99.000000 51.730864 0.000000 0.843252 0.782857 0.273931 5 2.8747E+05 5.599434 6.472076 12.087105 12.312483 -7.482900 49.079779 0.000001 0.000644 0.090855 -0.120E-02 max_dt log_rel_run_E_err -8.3431944197000476 rel_E_err 8.7454881539503919D-12 check gamma integral 8.9625486054618949E-003 2130 9.246397 2.754E+05 -11.534523 12.109279 51.730864 0.000000 0.000000 0.000000 0.217143 -1.474809 3251 1 -4.8001E+00 9.246397 -0.121182 7.005553 12.176262 -99.000000 51.730864 0.000000 0.843486 0.782857 0.274467 5 2.8747E+05 5.608132 6.472336 12.109276 12.338735 -7.478592 49.079779 0.000000 0.000334 0.091241 -0.132E-02 max_dt log_rel_run_E_err -8.3353243747330019 rel_E_err 8.4122934099865926D-12 check gamma integral 8.5733746949838777E-003 2140 9.248569 2.759E+05 -12.633227 12.132114 51.730864 0.000000 0.000000 0.000000 0.217143 -1.462521 3384 1 -4.8001E+00 9.248569 -0.122568 7.033025 12.195312 -99.000000 51.730864 0.000000 0.843616 0.782857 0.275028 5 2.8747E+05 5.617267 6.472578 12.132111 12.364947 -7.473820 49.079779 0.000000 0.000153 0.091479 -0.141E-02 max_dt log_rel_run_E_err -8.3280854071759123 rel_E_err 7.9755292224556534D-12 check gamma integral 8.1677910227880932E-003 2150 9.250872 2.765E+05 -13.257869 12.156204 51.730864 0.000000 0.000000 0.000000 0.217143 -1.449571 3008 1 -4.8001E+00 9.250872 -0.124209 7.061871 12.215333 -99.000000 51.730864 0.000000 0.843671 0.782857 0.275615 5 2.8747E+05 5.626918 6.472820 12.156200 12.391875 -7.468049 49.079779 0.000000 0.000061 0.091615 -0.157E-02 max_dt log_rel_run_E_err -8.3222025609956667 rel_E_err 5.9283441029028665D-12 save photos/x150 for model 2150 check gamma integral 7.7414236307331193E-003 2160 9.253316 2.770E+05 -11.402166 12.181537 51.730864 0.000000 0.000000 0.000000 0.217143 -1.435932 2830 1 -4.8001E+00 9.253316 -0.125900 7.092197 12.236392 -99.000000 51.730864 0.000000 0.843679 0.782857 0.276230 5 2.8747E+05 5.637119 6.473073 12.181533 12.419529 -7.462104 49.079779 0.000000 0.000023 0.091692 -0.173E-02 max_dt log_rel_run_E_err -8.3173958998577895 rel_E_err 5.4052305308906967D-12 check gamma integral 7.2929804974798170E-003 2170 9.255922 2.776E+05 -10.792618 12.208371 51.730864 0.000000 0.000000 0.000000 0.217143 -1.421540 2691 1 -4.8001E+00 9.255922 -0.127524 7.124259 12.258631 -99.000000 51.730864 0.000000 0.843660 0.782857 0.276875 5 2.8747E+05 5.647931 6.473347 12.208367 12.448241 -7.456477 49.053519 0.000000 0.000011 0.091747 -0.185E-02 max_dt log_rel_run_E_err -8.3130993410537695 rel_E_err 5.0024543094049285D-12 check gamma integral 6.8196076483078008E-003 2180 9.258705 2.782E+05 -11.657001 12.236782 51.730864 0.000000 0.000000 0.000000 0.217143 -1.406331 2609 1 -4.8001E+00 9.258705 -0.129298 7.158203 12.282163 -99.000000 51.730864 0.000000 0.843626 0.782857 0.277552 5 2.8747E+05 5.659412 6.473609 12.236778 12.478113 -7.450227 49.053519 0.000000 0.000008 0.091802 -0.179E-02 max_dt log_rel_run_E_err -8.3093070442390786 rel_E_err 4.5383186767178635D-12 check gamma integral 6.3191920467587804E-003 2190 9.261695 2.789E+05 -11.019898 12.267187 51.730864 0.000000 0.000000 0.000000 0.217143 -1.390194 2603 1 -4.8001E+00 9.261695 -0.131180 7.194421 12.307211 -99.000000 51.730864 0.000000 0.843580 0.782857 0.278266 5 2.8747E+05 5.671664 6.473907 12.267183 12.509633 -7.443633 49.053519 0.000000 0.000007 0.091870 -0.190E-02 max_dt log_rel_run_E_err -8.3055915792822219 rel_E_err 4.5694624021984199D-12 check gamma integral 5.7872865051696327E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2200 9.264919 2.796E+05 -10.315966 12.299767 51.730864 0.000000 0.000000 0.000000 0.217143 -1.373018 2601 1 -4.8001E+00 9.264919 -0.133190 7.233113 12.333959 -99.000000 51.730864 0.000000 0.843519 0.782857 0.279021 5 2.8747E+05 5.684781 6.474228 12.299763 12.542982 -7.436595 49.053519 0.000000 0.000007 0.091958 -0.204E-02 max_dt log_rel_run_E_err -8.3018961266276499 rel_E_err 4.6184142155549431D-12 save LOGS/profile8.data for model 2200 save photos/x200 for model 2200 check gamma integral 5.2205122411439226E-003 2210 9.268412 2.803E+05 -10.023245 12.334884 51.730864 0.000000 0.000000 0.000000 0.217143 -1.354657 2602 1 -4.8001E+00 9.268412 -0.135346 7.274657 12.362670 -99.000000 51.730864 0.000000 0.843436 0.782857 0.279824 5 2.8747E+05 5.698889 6.474577 12.334880 12.578535 -7.429042 49.049212 0.000000 0.000007 0.092077 -0.219E-02 max_dt log_rel_run_E_err -8.2981899493245397 rel_E_err 4.5206349298923160D-12 check gamma integral 4.6139889615846516E-003 2220 9.272218 2.811E+05 -9.229702 12.372949 51.730864 0.000000 0.000000 0.000000 0.217143 -1.334939 2603 1 -4.8001E+00 9.272218 -0.137679 7.319509 12.393657 -99.000000 51.730864 0.000000 0.843321 0.782857 0.280683 5 2.8747E+05 5.714144 6.474955 12.372945 12.616704 -7.420860 49.049212 0.000000 0.000007 0.092242 -0.237E-02 max_dt log_rel_run_E_err -8.2943985757088168 rel_E_err 4.6324930807948913D-12 check gamma integral 3.9619946463130698E-003 2230 9.276394 2.820E+05 -9.020127 12.414487 51.730864 0.000000 0.000000 0.000000 0.217143 -1.313650 2604 1 -4.8001E+00 9.276394 -0.140213 7.368240 12.427319 -99.000000 51.730864 0.000000 0.843157 0.782857 0.281610 5 2.8747E+05 5.730738 6.475370 12.414484 12.658001 -7.411972 49.049212 0.000000 0.000006 0.092478 -0.257E-02 max_dt log_rel_run_E_err -8.2904957143292251 rel_E_err 4.9280295264342909D-12 check gamma integral 3.2574604281777743E-003 2240 9.281011 2.830E+05 -8.201231 12.460166 51.730864 0.000000 0.000000 0.000000 0.217143 -1.290526 2604 1 -4.8001E+00 9.281011 -0.142982 7.421578 12.464164 -99.000000 51.730864 0.000000 0.842914 0.782857 0.282620 5 2.8747E+05 5.748915 6.475830 12.460162 12.703065 -7.402253 49.049212 0.000000 0.000006 0.092825 -0.281E-02 max_dt log_rel_run_E_err -8.2863492848520028 rel_E_err 5.2548951923779198D-12 check gamma integral 2.4916153042892838E-003 2250 9.286164 2.841E+05 -6.878695 12.510844 51.730864 0.000000 0.000000 0.000000 0.217143 -1.265247 2604 1 -4.8001E+00 9.286164 -0.146038 7.480463 12.504848 -99.000000 51.730864 0.000000 0.842542 0.782857 0.283734 5 2.8747E+05 5.768986 6.476346 12.510840 12.752699 -7.391525 49.049212 0.000000 0.000006 0.093358 -0.311E-02 max_dt log_rel_run_E_err -8.2800703049182101 rel_E_err 1.1525920415052430D-11 save photos/x250 for model 2250 check gamma integral 1.6534733313790185E-003 reached high velocities 0.39198479756111626 stopping in at least 1486.0936035952680 seconds 2260 9.292055 2.853E+05 -5.587560 12.567278 51.730864 0.000000 0.000000 0.000000 0.217143 -1.236986 2605 1 -4.7210E+00 9.292055 -0.149480 7.546862 12.550781 -99.000000 51.730864 0.000000 0.841925 0.782857 0.285014 5 2.8747E+05 5.791670 6.476944 12.567273 12.807303 -7.379442 49.049212 0.000000 0.000006 0.094242 -0.319E-02 max increase log_rel_run_E_err -8.2200026778424338 rel_E_err 1.1054153641615967D-10 check gamma integral 7.1832589014244773E-004 save LOGS/gamma1_prof001.data for model 2264 retry: check_lgL_power_photo_change hard limit 2268 2270 9.299158 2.866E+05 -3.008363 12.505453 51.730864 0.000000 0.000000 0.000000 0.217143 -1.194994 2604 2 -4.6458E+00 9.299158 -0.152941 7.613536 12.600647 -99.000000 51.730864 0.000000 0.839381 0.782857 0.287872 5 2.8747E+05 5.822453 6.478189 12.505447 12.712480 -7.368597 49.049212 0.000000 0.000005 0.097878 0.158E-01 max increase log_rel_run_E_err -8.1727904772767790 rel_E_err 8.8530606295640701D-11 check gamma integral -2.6897987311628622E-004 retry: max correction jumped -- give up in solver 2271 retry: max correction jumped -- give up in solver 2272 retry: some xa < min_xa_hard_limit 2273 retry: check_lgL_power_photo_change hard limit 2274 retry: check_lgL_power_photo_change hard limit 2276 retry: check_lgL_power_photo_change hard limit 2278 2280 9.296997 2.854E+05 -3.138869 12.420964 51.730864 0.000000 0.000000 0.000000 0.217143 -1.199576 2604 8 -6.1596E+00 9.296997 -0.151058 7.582246 12.581553 -99.000000 51.730864 0.000000 0.839227 0.782857 0.288062 5 2.8747E+05 5.816613 6.474092 12.420958 12.613054 -7.373674 49.049212 0.000000 0.000006 0.098098 -0.159E+00lgL_power_phot log_rel_run_E_err -8.1182030650447583 rel_E_err 4.8001039428833427D-12 check gamma integral 1.2416308014124458E-004 retry: check_lgL_power_photo_change hard limit 2282 2290 9.307570 2.867E+05 -2.950776 12.758864 51.730864 0.000000 0.000000 0.000000 0.217143 -1.168124 2606 9 -6.4986E+00 9.307570 -0.157441 7.715134 12.669541 -99.000000 51.730864 0.000000 0.839183 0.782857 0.288242 5 2.8747E+05 5.849084 6.469439 12.758860 13.012738 -7.346596 49.049212 0.000000 0.000005 0.098162 -0.365E+00lgL_power_phot log_rel_run_E_err -8.1154696094794812 rel_E_err 4.9448578052748742D-12 check gamma integral -1.6144326508674676E-003 retry: check_lgL_power_photo_change hard limit 2291 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2300 9.318647 2.875E+05 -2.727144 13.122368 51.730864 0.000000 0.000000 0.000000 0.217143 -1.135133 2609 10 -6.7664E+00 9.318647 -0.163136 7.850428 12.760427 -99.000000 51.730864 0.000000 0.839128 0.782857 0.288443 5 2.8747E+05 5.883147 6.463172 13.122365 13.420838 -7.321884 49.049212 0.000000 0.000005 0.098241 -0.579E+00lgL_power_phot log_rel_run_E_err -8.1125685772327856 rel_E_err 4.8917791005209581D-12 save LOGS/profile9.data for model 2300 save photos/x300 for model 2300 check gamma integral -3.3315872893578233E-003 retry: check_lgL_power_photo_change hard limit 2303 2310 9.329391 2.880E+05 -2.505774 13.480551 51.730864 0.000000 0.000000 0.000000 0.217143 -1.103051 2612 11 -7.0237E+00 9.329391 -0.167927 7.978040 12.847322 -99.000000 51.730864 0.000000 0.839048 0.782857 0.288660 5 2.8747E+05 5.916249 6.456527 13.480550 13.804549 -7.301008 49.049212 0.000000 0.000004 0.098357 -0.789E+00lgL_power_phot log_rel_run_E_err -8.1094680630980829 rel_E_err 5.2386209850632547D-12 check gamma integral -4.8867421713027709E-003 2320 9.341461 2.882E+05 -2.306193 13.883002 51.730864 0.000000 0.000000 0.000000 0.217143 -1.066972 2613 11 -7.1410E+00 9.341461 -0.172625 8.117687 12.943563 -99.000000 51.730864 0.000000 0.838893 0.782857 0.288937 5 2.8747E+05 5.953494 6.448391 13.883001 14.218210 -7.278334 49.049212 0.000000 0.000004 0.098581 -0.101E+01lgL_power_phot log_rel_run_E_err -8.1062448248375798 rel_E_err 5.4719227797992114D-12 check gamma integral -6.4993046601922915E-003 2330 9.354398 2.882E+05 -2.203835 14.302216 51.730864 0.000000 0.000000 0.000000 0.217143 -1.028392 2616 11 -7.2635E+00 9.354398 -0.177017 8.264125 13.045210 -99.000000 51.730864 0.000000 0.838567 0.782857 0.289286 5 2.8747E+05 5.993426 6.439571 14.302215 14.633686 -7.258570 49.049212 0.000000 0.000004 0.099052 -0.125E+01lgL_power_phot log_rel_run_E_err -8.1024600744080164 rel_E_err 5.6140036651936581D-12 check gamma integral -8.0666856616531651E-003 2340 9.367813 2.881E+05 -2.182898 14.703965 51.730864 0.000000 0.000000 0.000000 0.217143 -0.988764 2619 11 -7.3669E+00 9.367813 -0.181084 8.413884 13.149152 -99.000000 51.730864 0.000000 0.837841 0.782857 0.289747 4 2.8747E+05 6.034737 6.430556 14.703965 15.019900 -7.241979 49.049212 0.000001 0.000004 0.100106 -0.151E+01lgL_power_phot log_rel_run_E_err -8.0979027660551601 rel_E_err 5.6921975130477706D-12 check gamma integral -9.5181071988793380E-003 2350 9.381977 2.878E+05 -1.963413 15.066499 51.730864 0.000000 0.000000 0.000000 0.217143 -0.948032 2621 11 -7.4367E+00 9.381977 -0.185005 8.571846 13.257407 -99.000000 51.730864 0.000000 0.836053 0.782857 0.290458 3 2.8747E+05 6.077947 6.421016 15.066499 15.358105 -7.226650 49.049212 0.000001 0.000003 0.102714 -0.177E+01lgL_power_phot log_rel_run_E_err -8.0916763791597326 rel_E_err 5.1264741248159463D-12 save photos/x350 for model 2350 check gamma integral -1.0864273489010591E-002 2360 9.397854 2.874E+05 -1.589355 15.382629 51.730864 0.000000 0.000000 0.000000 0.217143 -0.905781 2623 11 -7.4641E+00 9.397854 -0.189086 8.751407 13.376683 -99.000000 51.730864 0.000000 0.830816 0.782857 0.291943 4 2.8747E+05 6.124968 6.410752 15.382629 15.637746 -7.210840 49.049212 0.000002 0.000004 0.110380 -0.207E+01lgL_power_phot log_rel_run_E_err -8.0814337558225198 rel_E_err 6.1104628751533873D-12 check gamma integral -1.2150052001486290E-002 2370 9.419366 2.870E+05 -1.075850 15.699080 51.730864 0.000000 0.000000 0.000000 0.217143 -0.864809 2633 11 -7.3981E+00 9.419366 -0.194239 9.000648 13.532648 -99.000000 51.730864 0.000000 0.806694 0.782857 0.297692 4 2.8747E+05 6.181446 6.397464 15.699080 15.874536 -7.191084 49.049212 0.000004 0.000004 0.145393 -0.247E+01 max increase log_rel_run_E_err -8.0622575473619573 rel_E_err 6.5278315202288111D-12 check gamma integral -1.3509517688701567E-002 2380 9.443617 2.864E+05 -0.539759 15.991282 51.730864 0.000000 0.000000 0.000000 0.217143 -0.873164 2638 11 -7.6107E+00 9.443617 -0.199747 9.289673 13.697771 -99.000000 51.730864 0.000000 0.704061 0.782857 0.323856 4 2.8747E+05 6.219414 6.382884 15.991282 16.034123 -7.170473 49.049212 0.000010 0.000017 0.238045 -0.293E+01 XO_cntr log_rel_run_E_err -8.0282781917587247 rel_E_err 7.4319183483958007D-12 check gamma integral -1.4554620274425506E-002 2390 9.455819 2.860E+05 -0.295518 16.124361 51.730864 0.000000 0.000000 0.000000 0.217143 -0.906396 2640 11 -7.8938E+00 9.455819 -0.202678 9.448501 13.780397 -99.000000 51.730864 0.000000 0.588706 0.782857 0.359276 4 2.8747E+05 6.223559 6.374804 16.124361 16.133077 -7.159798 49.049212 0.000014 0.000019 0.273672 -0.319E+01 XO_cntr log_rel_run_E_err -8.0001714322774955 rel_E_err 8.2029223858662913D-12 check gamma integral -1.4942309522440765E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2400 9.463548 2.857E+05 -0.151678 16.203673 51.730864 0.000000 0.000000 0.000000 0.217143 -0.937987 2644 11 -7.9829E+00 9.463548 -0.204807 9.563925 13.835986 -99.000000 51.730864 0.000000 0.484274 0.782857 0.396688 4 2.8747E+05 6.220010 6.368745 16.203673 16.239170 -7.152196 49.049212 0.000018 0.000018 0.313486 -0.338E+01 XO_cntr log_rel_run_E_err -7.9741797687082716 rel_E_err 9.0079185728174414D-12 save LOGS/profile10.data for model 2400 save photos/x400 for model 2400 check gamma integral -1.5163547825791608E-002 2410 9.470114 2.854E+05 -0.041076 16.265725 51.730864 0.000000 0.000000 0.000000 0.217143 -0.969026 2646 11 -7.9647E+00 9.470114 -0.207061 9.684159 13.889100 -99.000000 51.730864 0.000000 0.375149 0.782857 0.442671 4 2.8747E+05 6.213933 6.362129 16.265725 16.380508 -7.144302 49.049212 0.000021 0.000016 0.351582 -0.359E+01 dX_nuc o16 log_rel_run_E_err -7.9425456964521857 rel_E_err 9.1839889339935944D-12 check gamma integral -1.5354616227328914E-002 2420 9.475796 2.849E+05 0.023827 16.308385 51.730864 0.000000 0.000000 0.000000 0.217143 -0.996694 2652 11 -7.7830E+00 9.475796 -0.209778 9.823069 13.943539 -99.000000 51.730864 0.000000 0.267925 0.782857 0.497448 4 2.8747E+05 6.207398 6.353849 16.308385 16.562194 -7.135003 49.049212 0.000022 0.000013 0.380480 -0.384E+01 dX_nuc o16 log_rel_run_E_err -7.9000992717933860 rel_E_err 1.0436530407807773D-11 check gamma integral -1.5540583598200175E-002 2430 9.479920 2.843E+05 -0.014313 16.317514 51.730864 0.000000 0.000000 0.000000 0.217143 -1.017200 2661 11 -7.8683E+00 9.479920 -0.212972 9.970900 13.992486 -99.000000 51.730864 0.000000 0.182429 0.782857 0.551531 4 2.8747E+05 6.201850 6.343673 16.317514 16.743674 -7.124398 49.049212 0.000021 0.000010 0.392348 -0.416E+01 dX_nuc o16 log_rel_run_E_err -7.8463881425838711 rel_E_err 1.2106883671092739D-11 check gamma integral -1.5716071910120380E-002 2440 9.482018 2.833E+05 -0.353537 16.266214 51.730864 0.000000 0.000000 0.000000 0.217143 -1.035376 2671 11 -7.7543E+00 9.482018 -0.217372 10.128351 14.031642 -99.000000 51.730864 0.000001 0.116759 0.782857 0.603404 4 2.8747E+05 6.194395 6.328985 16.266214 16.882116 -7.110393 49.049212 0.000017 0.000007 0.388248 -0.461E+01 dX_nuc o16 log_rel_run_E_err -7.7733844723115713 rel_E_err 1.4085153645201581D-11 check gamma integral -1.5924614782697917E-002 2450 9.476734 2.811E+05 -2.129451 15.993622 51.730864 0.000000 0.000000 0.000000 0.217143 -1.070002 2672 11 -7.4418E+00 9.476734 -0.225297 10.222431 14.020357 -99.000000 51.730864 0.000000 0.072447 0.782857 0.646146 5 2.8747E+05 6.167455 6.299747 15.993621 16.757372 -7.087125 49.049212 0.000011 0.000005 0.374596 -0.550E+01 dX_nuc o16 log_rel_run_E_err -7.6758678369498048 rel_E_err 1.8209430181369930D-11 save photos/x450 for model 2450 check gamma integral -1.6348345013971886E-002 2460 9.459350 2.784E+05 -3.984743 15.432091 51.730864 0.000000 0.000000 0.000000 0.217143 -1.133672 2658 11 -7.7147E+00 9.459350 -0.234051 10.082662 13.906871 -99.000000 51.730864 0.000000 0.061540 0.782857 0.655782 5 2.8747E+05 6.108194 6.265307 15.432089 16.131263 -7.064022 49.084341 0.000007 0.000003 0.371190 -0.656E+01 lgRho_cntr log_rel_run_E_err -7.6316753487338289 rel_E_err 1.9431103133411435D-11 check gamma integral -1.6872765460906620E-002 2470 9.442847 2.765E+05 -4.725240 14.944074 51.730864 0.000000 0.000000 0.000000 0.217143 -1.191834 2651 11 -7.8753E+00 9.442847 -0.239740 9.903936 13.790572 -99.000000 51.730864 0.000000 0.060186 0.782857 0.654942 8 2.8747E+05 6.053775 6.241971 14.944070 15.503718 -7.050400 49.084341 0.000005 0.000002 0.371583 -0.731E+01 lgRho_cntr log_rel_run_E_err -6.7436788024767091 rel_E_err 7.4458817526402979D-10 check gamma integral -1.7066424432211260E-002 2480 9.426872 2.750E+05 -5.274104 14.493693 51.730864 0.000000 0.000000 0.000000 0.217143 -1.248749 2637 11 -7.9680E+00 9.426872 -0.244431 9.724298 13.675329 -99.000000 51.730864 0.000000 0.059919 0.782857 0.652917 7 2.8747E+05 6.001189 6.222907 14.493686 14.880620 -7.039867 49.084341 0.000004 0.000002 0.371836 -0.794E+01 lgRho_cntr log_rel_run_E_err -6.6964094242890910 rel_E_err 9.8181325040386666D-11 check gamma integral -1.6997478551579619E-002 2490 9.411171 2.736E+05 -5.746826 14.070058 51.730864 0.000000 0.000000 0.000000 0.217143 -1.305519 2615 11 -8.0309E+00 9.411171 -0.248652 9.546617 13.560031 -99.000000 51.730864 0.000000 0.059858 0.782857 0.650656 8 2.8747E+05 5.949424 6.205946 14.070045 14.256552 -7.030822 49.084341 0.000003 0.000001 0.371892 -0.853E+01 lgRho_cntr log_rel_run_E_err -6.6925388696087111 rel_E_err 1.8888637834965255D-11 check gamma integral -1.6668951556284776E-002 residual_norm > tol_residual_norm 2493 4.0283601965488520D+00 9.9999999999999995D-07 max_residual > tol_max_residual 2493 5.0472740494762926D+05 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2493 4.7564876559149234D-04 3.7081306036917914D-05 1.2360435345639305D-02 max_abs_correction > tol_max_correction*coeff 2493 8.0903299280052838D+00 3.7081306036917915D-03 1.2360435345639305D-02 retry: avg+max corr+resid -- give up in solver 2493 residual_norm > tol_residual_norm 2494 9.1247141942483310D+01 9.9999999999999995D-07 max_residual > tol_max_residual 2494 1.1247655468925403D+07 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2494 5.0795922572267659D-03 4.5196042349700600D-06 1.5065347449900201D-03 max_abs_correction > tol_max_correction*coeff 2494 6.6377493338636839D+01 4.5196042349700602D-04 1.5065347449900201D-03 retry: avg+max corr+resid -- give up in solver 2494 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.0.bin write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/kap_data/cache/lowT_fa05_gs98_z0.1_x0.1.bin residual_norm > tol_residual_norm 2496 6.1019815202069818D+00 9.9999999999999995D-07 max_residual > tol_max_residual 2496 7.6275817290667421D+05 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 2496 1.6884831356835037D+00 1.7767426494227849D-02 5.9224754980759499D-02 retry: max corr, avg+max resid -- give up in solver 2496 residual_norm > tol_residual_norm 2500 1.9773927935123076D-03 9.9999999999999995D-07 max_residual > tol_max_residual 2500 1.4189065878911236D+02 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 2500 6.5715245369006270D-01 4.5651507243932632D-02 1.5217169081310877D-01 retry: max corr, avg+max resid -- give up in solver 2500 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2500 9.404080 2.730E+05 -5.953783 13.884537 51.730864 0.000000 0.000000 0.000000 0.217143 -1.331407 2609 15 -8.6960E+00 9.404080 -0.250483 9.466327 13.507305 -99.000000 51.730864 0.000000 0.059849 0.782857 0.649606 5 2.8747E+05 5.926023 6.198492 13.884520 13.971869 -7.027029 49.084341 0.000002 0.000001 0.371896 -0.879E+01 retry log_rel_run_E_err -6.6918111220730196 rel_E_err 1.8358814881030842D-11 save LOGS/profile11.data for model 2500 save photos/x500 for model 2500 k, q, energy_removed_layers before adjustment is 201 0.99999739243322283 1.5375645047458057E+047 k, q, energy_removed_layers after adjustment is 214 0.99998777321717114 2.5902553906083873E+047 Layers above q= 0.99998777321717114 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10403.052734375000 max vel inside fraction of cutoff 1647.5707568477351 max c/cs inside fraction of cutoff 0.58590905016463790 average v/vesc outside cutoff 0.93701815396202270 Kinetic plus potential energy outside cutoff 2.5902553906083873E+047 mass inside cutoff 214 51.730231248204994 relax counter 0 log max v [km/s]= 4.0564895077215324 check gamma integral -1.6430967248286060E-002 residual_norm > tol_residual_norm 2505 1.2946031531747821D-02 9.9999999999999995D-07 max_residual > tol_max_residual 2505 4.7226560768517834D+02 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2505 7.6820270395599576D-04 3.5301486068299555D-05 1.1767162022766517D-02 max_abs_correction > tol_max_correction*coeff 2505 8.4982258089524905D+00 3.5301486068299551D-03 1.1767162022766517D-02 retry: avg+max corr+resid -- give up in solver 2505 residual_norm > tol_residual_norm 2508 8.4084143552978929D+01 9.9999999999999995D-07 max_residual > tol_max_residual 2508 8.7659005192260109D+06 1.0000000000000000D-03 correction_norm > tol_correction_norm*coeff 2508 1.9240933686076496D-02 5.3369582954365198D-07 1.7789860984788401D-04 max_abs_correction > tol_max_correction*coeff 2508 5.6211793945723991D+02 5.3369582954365204D-05 1.7789860984788401D-04 retry: avg+max corr+resid -- give up in solver 2508 residual_norm > tol_residual_norm 2510 6.6581252280705974D-05 9.9999999999999995D-07 max_residual > tol_max_residual 2510 4.4738017661007339D+00 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 2510 2510 9.399004 2.726E+05 -6.100714 13.753784 51.730864 0.000000 0.000000 0.000000 0.217143 -1.350023 2609 18 -8.8073E+00 9.399004 -0.251774 9.408819 13.469294 -99.000000 51.730864 0.000000 0.059845 0.782857 0.648849 5 2.8747E+05 5.909267 6.193209 13.753764 13.767340 -7.024399 49.084341 0.000002 0.000001 0.371896 -0.898E+01 retry log_rel_run_E_err -6.6913732575520450 rel_E_err 1.7246434199498591D-11 k, q, energy_removed_layers before adjustment is 203 0.99999638071230768 2.1829566954978307E+047 k, q, energy_removed_layers after adjustment is 215 0.99998673429213114 3.1177824672612283E+047 Layers above q= 0.99998673429213114 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10403.947265625000 max vel inside fraction of cutoff 1707.5279736345665 max c/cs inside fraction of cutoff 0.61179103004659918 average v/vesc outside cutoff 1.0403253712522276 Kinetic plus potential energy outside cutoff 3.1177824672612283E+047 mass inside cutoff 215 51.730177503715304 relax counter 0 log max v [km/s]= 4.1750447710430558 check gamma integral -1.6224940109739749E-002 residual_norm > tol_residual_norm 2517 5.7105898363287166D-03 9.9999999999999995D-07 max_residual > tol_max_residual 2517 3.5626396783165154D+02 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 2517 3.2980977675278028D-01 2.9999999999999999D-02 1.0000000000000001D-01 retry: max corr, avg+max resid -- give up in solver 2517 retry: adjust_correction failed in eval_equations -- give up in solver 2518 residual_norm > tol_residual_norm 2520 1.8620637334990828D-06 9.9999999999999995D-07 max_residual > tol_max_residual 2520 1.7429207673670102D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 2520 2520 9.394179 2.722E+05 -6.239882 13.630985 51.730864 0.000000 0.000000 0.000000 0.217143 -1.367790 2618 21 -8.9186E+00 9.394179 -0.252987 9.354112 13.432950 -99.000000 51.730864 0.000000 0.059842 0.782857 0.648125 5 2.8747E+05 5.893331 6.188235 13.630962 13.572532 -7.021963 49.084341 0.000002 0.000001 0.371896 -0.915E+01 retry log_rel_run_E_err -6.6909760075099811 rel_E_err 1.7267488582126346D-11 k, q, energy_removed_layers before adjustment is 199 0.99999504880750312 2.7328164416308678E+047 k, q, energy_removed_layers after adjustment is 214 0.99998415796032569 3.5466917951569797E+047 Layers above q= 0.99998415796032569 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10404.773437500000 max vel inside fraction of cutoff 1761.8115770398704 max c/cs inside fraction of cutoff 0.63570523161079440 average v/vesc outside cutoff 1.0158152449354967 Kinetic plus potential energy outside cutoff 3.5466917951569797E+047 mass inside cutoff 214 51.730044227845703 relax counter 0 log max v [km/s]= 4.2827143360424147 check gamma integral -1.6000881847266196E-002 2530 9.387049 2.719E+05 -6.445426 13.452018 51.730864 0.000000 0.000000 0.000000 0.217143 -1.394177 2600 21 -8.1268E+00 9.387049 -0.254759 9.273183 13.378861 -99.000000 51.730864 0.000000 0.059840 0.782857 0.647045 21 2.8747E+05 5.869763 6.182888 13.451989 13.284326 -7.016543 49.084341 0.000002 0.000001 0.371894 -0.940E+01 max increase log_rel_run_E_err -6.6905930173389869 rel_E_err 1.6978395442349101D-11 k, q, energy_removed_layers before adjustment is 177 0.99999368606795469 3.3093419943679346E+047 k, q, energy_removed_layers after adjustment is 191 0.99998323229524111 4.0874951657929902E+047 Layers above q= 0.99998323229524111 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10405.958984375000 max vel inside fraction of cutoff 1837.5494086307251 max c/cs inside fraction of cutoff 0.66988984281064279 average v/vesc outside cutoff 1.1043537772357919 Kinetic plus potential energy outside cutoff 4.0874951657929902E+047 mass inside cutoff 191 51.729996342391331 relax counter 0 log max v [km/s]= 4.4546330712175477 check gamma integral -1.5618492311767325E-002 2540 9.370453 1.966E+06 -6.928656 13.046129 51.730864 0.000000 0.000000 0.000000 0.217143 -1.456164 2596 21 -8.1297E+00 9.370453 -0.206954 9.084444 13.251244 -99.000000 51.730864 0.000000 0.059839 0.782857 0.644493 6 2.8747E+05 5.814821 9.714883 13.046081 12.615648 -7.126685 49.084341 0.000002 0.000000 0.371892 0.113E+02 lgRho_cntr log_rel_run_E_err -6.6902417610320848 rel_E_err 1.6564578057666407D-11 k, q, energy_removed_layers before adjustment is 170 0.99999059000613810 4.4031122301502755E+047 k, q, energy_removed_layers after adjustment is 185 0.99998049836802694 5.0220967848336256E+047 Layers above q= 0.99998049836802694 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10408.570312500000 max vel inside fraction of cutoff 1995.7490337314373 max c/cs inside fraction of cutoff 0.74464835081223613 average v/vesc outside cutoff 1.1711679217342150 Kinetic plus potential energy outside cutoff 5.0220967848336256E+047 mass inside cutoff 185 51.729854913975117 relax counter 0 log max v [km/s]= 4.9680799785038579 check gamma integral -1.4487076497090096E-002 2550 9.355158 8.542E+05 -7.386458 12.683301 51.730864 0.000000 0.000000 0.000000 0.217143 -1.513808 2702 21 -8.1538E+00 9.355158 0.035850 8.909632 13.131357 -99.000000 51.730864 0.000000 0.059838 0.782857 0.642131 5 2.8747E+05 5.764152 8.752560 12.683228 12.008030 -7.590287 49.084341 0.000002 0.000000 0.371892 0.617E+02 lgRho_cntr log_rel_run_E_err -6.6899164978316250 rel_E_err 1.5924285815412896D-11 save photos/x550 for model 2550 k, q, energy_removed_layers before adjustment is 289 0.99998826978011501 5.1154862991603157E+047 k, q, energy_removed_layers after adjustment is 301 0.99997836942249374 5.6541861529921725E+047 Layers above q= 0.99997836942249374 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10410.837890625000 max vel inside fraction of cutoff 2123.6421479189539 max c/cs inside fraction of cutoff 0.80864915357311273 average v/vesc outside cutoff 1.2062559855116843 Kinetic plus potential energy outside cutoff 5.6541861529921725E+047 mass inside cutoff 301 51.729744781783808 relax counter 0 log max v [km/s]= 5.2121803330907515 check gamma integral -1.3138252088824180E-002 2560 9.339911 5.942E+05 -7.858101 12.329652 51.730864 0.000000 0.000000 0.000000 0.217143 -1.571646 2792 21 -8.1723E+00 9.339911 0.211066 8.733945 13.009482 -99.000000 51.730864 0.000000 0.059838 0.782857 0.639782 5 2.8747E+05 5.713634 8.472576 12.329542 11.415413 -7.939823 49.084341 0.000002 0.000000 0.371891 0.944E+02 lgRho_cntr log_rel_run_E_err -6.6896081109509282 rel_E_err 1.4986849187536532D-11 k, q, energy_removed_layers before adjustment is 387 0.99998591084582744 5.6890816856859682E+047 k, q, energy_removed_layers after adjustment is 401 0.99997542248737237 6.1395657328388164E+047 Layers above q= 0.99997542248737237 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10413.000000000000 max vel inside fraction of cutoff 2237.8378296229566 max c/cs inside fraction of cutoff 0.86873220995170408 average v/vesc outside cutoff 1.2403501039835849 Kinetic plus potential energy outside cutoff 6.1395657328388164E+047 mass inside cutoff 401 51.729592334284561 relax counter 0 log max v [km/s]= 5.2565753878153396 check gamma integral -1.1496245857877905E-002 2570 9.324690 4.707E+05 -8.345083 11.982301 51.730864 0.000000 0.000000 0.000000 0.217143 -1.629616 2845 21 -8.1867E+00 9.324690 0.339230 8.556721 12.885332 -99.000000 51.730864 0.000000 0.059838 0.782857 0.637459 5 2.8747E+05 5.663231 8.324156 11.982138 10.836605 -8.196418 49.084341 0.000002 0.000000 0.371891 0.118E+03 lgRho_cntr log_rel_run_E_err -6.6893126525156159 rel_E_err 1.3681868776935042D-11 k, q, energy_removed_layers before adjustment is 446 0.99998415796032691 6.1307127513591459E+047 k, q, energy_removed_layers after adjustment is 459 0.99997406497724417 6.5402770387650325E+047 Layers above q= 0.99997406497724417 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10415.080078125000 max vel inside fraction of cutoff 2341.4382219597878 max c/cs inside fraction of cutoff 0.92577402858528668 average v/vesc outside cutoff 1.2767835812724995 Kinetic plus potential energy outside cutoff 6.5402770387650325E+047 mass inside cutoff 459 51.729522109113077 relax counter 0 log max v [km/s]= 5.2804267104223355 check gamma integral -9.5614766810191588E-003 2580 9.309479 3.974E+05 -8.848209 11.638853 51.730864 0.000000 0.000000 0.000000 0.217143 -1.687627 2871 21 -8.1977E+00 9.309479 0.439503 8.377325 12.758654 -99.000000 51.730864 0.000000 0.059838 0.782857 0.635176 5 2.8747E+05 5.612925 8.230691 11.638615 10.265431 -8.397125 49.084341 0.000002 0.000000 0.371891 0.137E+03 lgRho_cntr log_rel_run_E_err -6.6890259922058544 rel_E_err 1.3767337392382213D-11 k, q, energy_removed_layers before adjustment is 480 0.99998248268958889 6.5282401617231671E+047 k, q, energy_removed_layers after adjustment is 491 0.99997263782481161 6.8783468646740247E+047 Layers above q= 0.99997263782481161 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10417.103515625000 max vel inside fraction of cutoff 2436.7491880623588 max c/cs inside fraction of cutoff 0.98045729352913091 average v/vesc outside cutoff 1.3040037407664611 Kinetic plus potential energy outside cutoff 6.8783468646740247E+047 mass inside cutoff 491 51.729448281285045 relax counter 0 log max v [km/s]= 5.2972751386613117 check gamma integral -7.3402467409852575E-003 2590 9.294263 3.480E+05 -9.368378 11.297020 51.730864 0.000000 0.000000 0.000000 0.217143 -1.745577 2906 21 -8.2057E+00 9.294263 0.521843 8.195149 12.629165 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632952 4 2.8747E+05 5.562706 8.164773 11.296676 9.693424 -8.561916 49.084341 0.000002 0.000000 0.371891 0.152E+03 lgRho_cntr log_rel_run_E_err -6.6887447307601287 rel_E_err 1.3432262810472586D-11 k, q, energy_removed_layers before adjustment is 513 0.99998110726936806 6.8161807202036561E+047 k, q, energy_removed_layers after adjustment is 527 0.99997040079562338 7.1670674270598510E+047 Layers above q= 0.99997040079562338 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10419.083984375000 max vel inside fraction of cutoff 2525.7743977206355 max c/cs inside fraction of cutoff 1.0334662375228161 average v/vesc outside cutoff 1.2915858343511739 Kinetic plus potential energy outside cutoff 7.1670674270598510E+047 mass inside cutoff 527 51.729332557832905 relax counter 0 log max v [km/s]= 5.3105572980514690 check gamma integral -4.8450986802588761E-003 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2600 9.279026 3.118E+05 -9.906482 10.954841 51.730864 0.000000 0.000000 0.000000 0.217143 -1.803356 2920 21 -8.2110E+00 9.279026 0.591850 8.009600 12.496577 -99.000000 51.730864 0.000000 0.059838 0.782857 0.630803 4 2.8747E+05 5.512562 8.113890 10.954348 9.112754 -8.702015 49.084341 0.000002 0.000000 0.371891 0.166E+03 lgRho_cntr log_rel_run_E_err -6.6884704895039899 rel_E_err 1.2940173926708401D-11 save LOGS/profile12.data for model 2600 save photos/x600 for model 2600 k, q, energy_removed_layers before adjustment is 533 0.99997987815944689 7.0798384912222540E+047 k, q, energy_removed_layers after adjustment is 547 0.99996865856288020 7.4207435532722349E+047 Layers above q= 0.99996865856288020 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10421.033203125000 max vel inside fraction of cutoff 2610.0808885626157 max c/cs inside fraction of cutoff 1.0853873527533187 average v/vesc outside cutoff 1.3106821652195471 Kinetic plus potential energy outside cutoff 7.4207435532722349E+047 mass inside cutoff 547 51.729242430628247 relax counter 0 log max v [km/s]= 5.3216856417390055 check gamma integral -2.0961798580235373E-003 2610 9.263751 2.838E+05 -10.463401 10.610535 51.730864 0.000000 0.000000 0.000000 0.217143 -1.860843 2946 21 -8.2138E+00 9.263751 0.652953 7.820071 12.360586 -99.000000 51.730864 0.000000 0.059838 0.782857 0.628748 4 2.8747E+05 5.462490 8.072365 10.609831 8.516666 -8.824288 49.084341 0.000002 0.000000 0.371891 0.178E+03 lgRho_cntr log_rel_run_E_err -6.6882093152899307 rel_E_err 1.2183302532287063D-11 k, q, energy_removed_layers before adjustment is 558 0.99997836942249430 7.3526103761092316E+047 k, q, energy_removed_layers after adjustment is 571 0.99996766162545592 7.6451566845489007E+047 Layers above q= 0.99996766162545592 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10422.966796875000 max vel inside fraction of cutoff 2690.8445948363574 max c/cs inside fraction of cutoff 1.1367091408240459 average v/vesc outside cutoff 1.3320964932063895 Kinetic plus potential energy outside cutoff 7.6451566845489007E+047 mass inside cutoff 571 51.729190858194180 relax counter 0 log max v [km/s]= 5.3313548325606925 check gamma integral 8.7828597375512636E-004 2620 9.246989 2.596E+05 -11.094787 10.229569 51.730864 0.000000 0.000000 0.000000 0.217143 -1.923240 2958 21 -8.1748E+00 9.246989 0.712208 7.607465 12.207581 -99.000000 51.730864 0.000000 0.059838 0.782857 0.626630 4 2.8747E+05 5.407806 8.036186 10.228531 7.838366 -8.942860 49.084341 0.000002 0.000000 0.371891 0.189E+03 lgRho_cntr log_rel_run_E_err -6.6879522609320841 rel_E_err 1.2297377900948475D-11 k, q, energy_removed_layers before adjustment is 572 0.99997646240375015 7.6213219370448277E+047 k, q, energy_removed_layers after adjustment is 585 0.99996557370667649 7.8675199104849741E+047 Layers above q= 0.99996557370667649 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10425.076171875000 max vel inside fraction of cutoff 2776.0937258961599 max c/cs inside fraction of cutoff 1.1926218686688177 average v/vesc outside cutoff 1.3348193579846013 Kinetic plus potential energy outside cutoff 7.8675199104849741E+047 mass inside cutoff 585 51.729082848352277 relax counter 0 log max v [km/s]= 5.3407618852023298 check gamma integral 4.3454619450380046E-003 2630 9.230004 2.393E+05 -11.754988 9.839342 51.730864 0.000000 0.000000 0.000000 0.217143 -1.985484 2969 21 -8.1724E+00 9.230004 0.765912 7.386498 12.048288 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624660 3 2.8747E+05 5.352750 8.002229 9.837809 7.109419 -9.050322 49.084341 0.000002 0.000000 0.371891 0.201E+03 lgRho_cntr log_rel_run_E_err -6.6877075258668439 rel_E_err 1.1382925293390319D-11 k, q, energy_removed_layers before adjustment is 589 0.99997542248737281 7.8001392868768953E+047 k, q, energy_removed_layers after adjustment is 603 0.99996378160597921 8.0689402417346613E+047 Layers above q= 0.99996378160597921 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10427.207031250000 max vel inside fraction of cutoff 2859.6296875370886 max c/cs inside fraction of cutoff 1.2492033346861102 average v/vesc outside cutoff 1.3453569229100957 Kinetic plus potential energy outside cutoff 8.0689402417346613E+047 mass inside cutoff 603 51.728990141435276 relax counter 0 log max v [km/s]= 5.3493379604465030 check gamma integral 8.0093312304412752E-003 2640 9.212923 2.222E+05 -12.436358 9.442114 51.730864 0.000000 0.000000 0.000000 0.217143 -2.046867 2976 21 -8.1676E+00 9.212923 0.814953 7.157801 11.883509 -99.000000 51.730864 0.000000 0.059838 0.782857 0.622884 3 2.8747E+05 5.297796 7.971928 9.439851 6.278280 -9.148450 49.084341 0.000002 0.000000 0.371891 0.212E+03 lgRho_cntr log_rel_run_E_err -6.6874720739289204 rel_E_err 1.1016712155249483D-11 k, q, energy_removed_layers before adjustment is 602 0.99997406497724428 8.0021943274848866E+047 k, q, energy_removed_layers after adjustment is 615 0.99996284601328689 8.2544398594725689E+047 Layers above q= 0.99996284601328689 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10429.357421875000 max vel inside fraction of cutoff 2941.2173300191848 max c/cs inside fraction of cutoff 1.3063103192804493 average v/vesc outside cutoff 1.3649236534201812 Kinetic plus potential energy outside cutoff 8.2544398594725689E+047 mass inside cutoff 615 51.728941742417184 relax counter 0 log max v [km/s]= 5.3572068979540699 check gamma integral 1.1767675494794842E-002 2650 9.195649 2.075E+05 -13.130923 9.035964 51.730864 0.000000 0.000000 0.000000 0.217143 -2.107506 2980 21 -8.1794E+00 9.195649 0.860579 6.918913 11.711903 -99.000000 51.730864 0.000000 0.059838 0.782857 0.621321 3 2.8747E+05 5.242701 7.944155 9.032634 4.487085 -9.239745 49.084341 0.000002 0.000000 0.371891 0.222E+03 lgRho_cntr log_rel_run_E_err -6.6872449291204292 rel_E_err 1.0720268842122788D-11 save photos/x650 for model 2650 k, q, energy_removed_layers before adjustment is 612 0.99997263782481205 8.1947942521077061E+047 k, q, energy_removed_layers after adjustment is 625 0.99996091505584173 8.4258849460607192E+047 Layers above q= 0.99996091505584173 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10431.548828125000 max vel inside fraction of cutoff 3021.5836146868205 max c/cs inside fraction of cutoff 1.3645239652120116 average v/vesc outside cutoff 1.3705886090116384 Kinetic plus potential energy outside cutoff 8.4258849460607192E+047 mass inside cutoff 625 51.728841852320691 relax counter 0 log max v [km/s]= 5.3645629050411792 check gamma integral 1.5556561725079420E-002 2660 9.178279 1.950E+05 -13.788661 8.610822 51.730864 0.000000 0.000000 0.000000 0.217143 -2.166868 2978 21 -8.1785E+00 9.178279 0.903286 6.669772 11.533964 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620005 3 2.8747E+05 5.187829 7.921742 8.605819 4.529665 -9.325196 49.084341 0.000002 0.000000 0.371891 0.232E+03 lgRho_cntr log_rel_run_E_err -6.6870262864791288 rel_E_err 1.0132343424810538D-11 k, q, energy_removed_layers before adjustment is 617 0.99997191156076615 8.3457799254268327E+047 k, q, energy_removed_layers after adjustment is 630 0.99995991765007075 8.5867351144313460E+047 Layers above q= 0.99995991765007075 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10433.779296875000 max vel inside fraction of cutoff 3091.7158754741531 max c/cs inside fraction of cutoff 1.4165783944698607 average v/vesc outside cutoff 1.3869870840731267 Kinetic plus potential energy outside cutoff 8.5867351144313460E+047 mass inside cutoff 630 51.728790255658637 relax counter 0 log max v [km/s]= 5.3715080400663711 check gamma integral 1.9266683078951869E-002 2670 9.160759 1.836E+05 -14.320463 8.182621 51.730864 0.000000 0.000000 0.000000 0.217143 -2.225002 2979 21 -8.1723E+00 9.160759 0.943813 6.408045 11.348679 -99.000000 51.730864 0.000000 0.059838 0.782857 0.618950 3 2.8747E+05 5.133049 7.898042 8.175261 4.000136 -9.406287 49.084341 0.000002 0.000000 0.371891 0.242E+03 lgRho_cntr log_rel_run_E_err -6.6868157897992413 rel_E_err 1.0013048243565257D-11 k, q, energy_removed_layers before adjustment is 624 0.99997040079562360 8.5224342685961516E+047 k, q, energy_removed_layers after adjustment is 636 0.99995889858137932 8.7388460769136347E+047 Layers above q= 0.99995889858137932 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10436.076171875000 max vel inside fraction of cutoff 3169.2193377340386 max c/cs inside fraction of cutoff 1.4769664937812266 average v/vesc outside cutoff 1.4028279169254099 Kinetic plus potential energy outside cutoff 8.7388460769136347E+047 mass inside cutoff 636 51.728737538355013 relax counter 0 log max v [km/s]= 5.3781671188885358 check gamma integral 2.2824801152405490E-002 2680 9.142082 1.727E+05 -14.613057 7.732047 51.730864 0.000000 0.000000 0.000000 0.217143 -2.285005 2983 21 -8.0010E+00 9.142082 0.984805 6.115622 11.144339 -99.000000 51.730864 0.000000 0.059838 0.782857 0.618132 3 2.8747E+05 5.075297 7.873769 7.721414 3.066903 -9.488306 49.084341 0.000002 0.000000 0.371891 0.253E+03 lgRho_cntr log_rel_run_E_err -6.6866151066954718 rel_E_err 9.2298640164025205D-12 k, q, energy_removed_layers before adjustment is 634 0.99996865856288086 8.7092495507324240E+047 k, q, energy_removed_layers after adjustment is 645 0.99995784245997565 8.8920644869921710E+047 Layers above q= 0.99995784245997565 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10438.583984375000 max vel inside fraction of cutoff 3250.1195985394506 max c/cs inside fraction of cutoff 1.5428190983120325 average v/vesc outside cutoff 1.4233952199281239 Kinetic plus potential energy outside cutoff 8.8920644869921710E+047 mass inside cutoff 645 51.728682904282579 relax counter 0 log max v [km/s]= 5.3849343544399488 check gamma integral 2.6337144777269391E-002 2690 9.123792 1.632E+05 -14.734311 7.299165 51.730864 0.000000 0.000000 0.000000 0.217143 -2.341806 2982 21 -8.0997E+00 9.123792 1.023228 5.813705 10.936988 -99.000000 51.730864 0.000000 0.059838 0.782857 0.617641 3 2.8747E+05 5.019391 7.852523 7.284726 2.115152 -9.565184 49.084341 0.000002 0.000000 0.371891 0.263E+03 lgRho_cntr log_rel_run_E_err -6.6864196323933234 rel_E_err 8.8720133988538958D-12 k, q, energy_removed_layers before adjustment is 637 0.99996766162545669 8.8509674567328917E+047 k, q, energy_removed_layers after adjustment is 648 0.99995656021094836 9.0351974683252212E+047 Layers above q= 0.99995656021094836 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10441.125000000000 max vel inside fraction of cutoff 3327.6893795419251 max c/cs inside fraction of cutoff 1.6090606150992450 average v/vesc outside cutoff 1.4364523640651814 Kinetic plus potential energy outside cutoff 9.0351974683252212E+047 mass inside cutoff 648 51.728616572432848 relax counter 0 log max v [km/s]= 5.3913262630927141 check gamma integral 2.9441039903539929E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2700 9.105650 1.545E+05 -14.859701 6.883897 51.730864 0.000000 0.000000 0.000000 0.217143 -2.396327 2982 21 -8.1116E+00 9.105650 1.060056 5.496666 10.723858 -99.000000 51.730864 0.000000 0.059838 0.782857 0.617446 3 2.8747E+05 4.964553 7.830641 6.865716 1.132671 -9.638869 49.084341 0.000002 0.000000 0.371891 0.273E+03 lgRho_cntr log_rel_run_E_err -6.6862333350389180 rel_E_err 8.7067930630763184D-12 save LOGS/profile13.data for model 2700 save photos/x700 for model 2700 k, q, energy_removed_layers before adjustment is 641 0.99996663876636394 8.9872898125319702E+047 k, q, energy_removed_layers after adjustment is 652 0.99995522086333533 9.1712710579330651E+047 Layers above q= 0.99995522086333533 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10443.740234375000 max vel inside fraction of cutoff 3402.8685065368991 max c/cs inside fraction of cutoff 1.6766955623883435 average v/vesc outside cutoff 1.4478911216832988 Kinetic plus potential energy outside cutoff 9.1712710579330651E+047 mass inside cutoff 652 51.728547286823968 relax counter 0 log max v [km/s]= 5.3974837107160489 check gamma integral 3.2162711018796294E-002 2710 9.086076 1.458E+05 -14.985641 6.454166 51.730864 0.000000 0.000000 0.000000 0.217143 -2.453314 2981 21 -8.0129E+00 9.086076 1.098723 5.132123 10.485177 -99.000000 51.730864 0.000000 0.059838 0.782857 0.617539 3 2.8747E+05 4.906026 7.807277 6.432968 0.027961 -9.716235 49.084341 0.000002 0.000000 0.371891 0.285E+03 lgRho_cntr log_rel_run_E_err -6.6860531937103369 rel_E_err 8.3595316248224172D-12 k, q, energy_removed_layers before adjustment is 645 0.99996469360964158 9.1485803870756967E+047 k, q, energy_removed_layers after adjustment is 655 0.99995384743720150 9.3126368731329344E+047 Layers above q= 0.99995384743720150 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10446.695312500000 max vel inside fraction of cutoff 3481.8146267668553 max c/cs inside fraction of cutoff 1.7521365390266594 average v/vesc outside cutoff 1.4615704647910877 Kinetic plus potential energy outside cutoff 9.3126368731329344E+047 mass inside cutoff 655 51.728476238303770 relax counter 0 log max v [km/s]= 5.4039646750425865 check gamma integral 3.4696551147191161E-002 2720 9.067459 1.382E+05 -15.103457 6.060056 51.730864 0.000000 0.000000 0.000000 0.217143 -2.505930 2985 21 -8.0554E+00 9.067459 1.134722 4.761288 10.249503 -99.000000 51.730864 0.000000 0.059838 0.782857 0.617900 3 2.8747E+05 4.850937 7.785558 6.037660 -1.067317 -9.788260 49.084341 0.000002 0.000000 0.371891 0.296E+03 lgRho_cntr log_rel_run_E_err -6.6858843336930169 rel_E_err 7.6413848189899830D-12 k, q, energy_removed_layers before adjustment is 654 0.99996378160597976 9.2728304770144602E+047 k, q, energy_removed_layers after adjustment is 664 0.99995241327594930 9.4421635593747904E+047 Layers above q= 0.99995241327594930 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10449.650390625000 max vel inside fraction of cutoff 3554.4892688157879 max c/cs inside fraction of cutoff 1.8264211862042066 average v/vesc outside cutoff 1.4708655205863486 Kinetic plus potential energy outside cutoff 9.4421635593747904E+047 mass inside cutoff 664 51.728402047903437 relax counter 0 log max v [km/s]= 5.4100142252065950 check gamma integral 3.6737926297826518E-002 2730 9.047861 1.307E+05 -15.227867 5.651930 51.730864 0.000000 0.000000 0.000000 0.217143 -2.559939 2991 21 -7.8799E+00 9.047861 1.172026 4.342358 9.992029 -99.000000 51.730864 0.000000 0.059838 0.782857 0.618531 4 2.8747E+05 4.793471 7.763549 5.630099 -2.269099 -9.862898 49.084341 0.000002 0.000000 0.371891 0.308E+03 lgRho_cntr log_rel_run_E_err -6.6857220383640934 rel_E_err 7.6893992012533889D-12 k, q, energy_removed_layers before adjustment is 662 0.99996187797925762 9.4260797519681855E+047 k, q, energy_removed_layers after adjustment is 672 0.99994960382244069 9.5749341049590355E+047 Layers above q= 0.99994960382244069 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10452.935546875000 max vel inside fraction of cutoff 3627.9629394210283 max c/cs inside fraction of cutoff 1.9075158690691782 average v/vesc outside cutoff 1.4691042513596400 Kinetic plus potential energy outside cutoff 9.5749341049590355E+047 mass inside cutoff 672 51.728256712446765 relax counter 0 log max v [km/s]= 5.4162958471107459 check gamma integral 3.8538747852200184E-002 2740 9.028651 1.238E+05 -15.350549 5.249975 51.730864 0.000000 0.000000 0.000000 0.217143 -2.611748 2995 21 -7.9890E+00 9.028651 1.208138 3.900866 9.730145 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619371 3 2.8747E+05 4.737610 7.742200 5.230088 -3.497392 -9.935151 49.084341 0.000002 0.000000 0.371891 0.320E+03 lgRho_cntr log_rel_run_E_err -6.6855665277773229 rel_E_err 7.3394942309607413D-12 k, q, energy_removed_layers before adjustment is 669 0.99996091505584239 9.5473884268200484E+047 k, q, energy_removed_layers after adjustment is 679 0.99994813625235079 9.7041790644295271E+047 Layers above q= 0.99994813625235079 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10456.345703125000 max vel inside fraction of cutoff 3696.6746285385543 max c/cs inside fraction of cutoff 1.9900895369935314 average v/vesc outside cutoff 1.4821787357580030 Kinetic plus potential energy outside cutoff 9.7041790644295271E+047 mass inside cutoff 679 51.728180793778400 relax counter 0 log max v [km/s]= 5.4224017817043810 check gamma integral 4.0007615371710575E-002 2750 9.009472 1.174E+05 -15.474065 4.841347 51.730864 0.000000 0.000000 0.000000 0.217143 -2.662618 3000 21 -7.8986E+00 9.009472 1.243844 3.427180 9.459164 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620395 3 2.8747E+05 4.682227 7.720473 4.824281 -4.775118 -10.006589 49.084341 0.000002 0.000000 0.371891 0.333E+03 max increase log_rel_run_E_err -6.6854182732105514 rel_E_err 6.7255058976380311D-12 save photos/x750 for model 2750 k, q, energy_removed_layers before adjustment is 675 0.99995889858137976 9.6922592043431697E+047 k, q, energy_removed_layers after adjustment is 684 0.99994660689660519 9.8298714621354301E+047 Layers above q= 0.99994660689660519 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10459.957031250000 max vel inside fraction of cutoff 3760.7329352834231 max c/cs inside fraction of cutoff 2.0751106430314721 average v/vesc outside cutoff 1.4874266782987919 Kinetic plus potential energy outside cutoff 9.8298714621354301E+047 mass inside cutoff 684 51.728101678884705 relax counter 0 log max v [km/s]= 5.4284487435626438 check gamma integral 4.1235184531873754E-002 2760 8.989354 1.110E+05 -15.604835 4.405302 51.730864 0.000000 0.000000 0.000000 0.217143 -2.715325 3000 21 -7.9111E+00 8.989354 1.281007 2.892380 9.164438 -99.000000 51.730864 0.000000 0.059838 0.782857 0.621634 3 2.8747E+05 4.624469 7.697405 4.391762 -6.172933 -10.080943 49.084341 0.000002 0.000000 0.371891 0.347E+03 lgRho_cntr log_rel_run_E_err -6.6852756142594041 rel_E_err 6.5139749761395996D-12 k, q, energy_removed_layers before adjustment is 678 0.99995784245997565 9.8183070360067943E+047 k, q, energy_removed_layers after adjustment is 688 0.99994425622842242 9.9607692799177898E+047 Layers above q= 0.99994425622842242 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10463.988281250000 max vel inside fraction of cutoff 3822.9929592230014 max c/cs inside fraction of cutoff 2.1675207953831270 average v/vesc outside cutoff 1.4937330155134638 Kinetic plus potential energy outside cutoff 9.9607692799177898E+047 mass inside cutoff 688 51.727980076789223 relax counter 0 log max v [km/s]= 5.4347419408171831 check gamma integral 4.2322432101816382E-002 2770 8.970246 1.052E+05 -15.730210 3.994018 51.730864 0.000000 0.000000 0.000000 0.217143 -2.764937 3001 21 -7.9161E+00 8.970246 1.316069 2.346767 8.874627 -99.000000 51.730864 0.000000 0.059838 0.782857 0.622944 3 2.8747E+05 4.569890 7.675649 3.984122 -7.557269 -10.151093 49.084341 0.000002 0.000000 0.371891 0.361E+03 lgRho_cntr log_rel_run_E_err -6.6851406170942251 rel_E_err 6.2300433867583448D-12 k, q, energy_removed_layers before adjustment is 683 0.99995522086333510 9.9672983114252437E+047 k, q, energy_removed_layers after adjustment is 692 0.99994303514954308 1.0083696651392632E+048 Layers above q= 0.99994303514954308 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10468.062500000000 max vel inside fraction of cutoff 3876.2994625120800 max c/cs inside fraction of cutoff 2.2576864445158611 average v/vesc outside cutoff 1.5106217391959642 Kinetic plus potential energy outside cutoff 1.0083696651392632E+048 mass inside cutoff 692 51.727916909324080 relax counter 0 log max v [km/s]= 5.4406782859528491 check gamma integral 4.3211626167668209E-002 2780 8.949755 9.948E+04 -15.865983 3.582512 51.730864 0.000000 0.000000 0.000000 0.217143 -2.817874 3004 21 -7.8129E+00 8.949755 1.353482 1.718283 8.553158 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624462 3 2.8747E+05 4.511589 7.652684 3.576535 -9.105963 -10.225947 49.084341 0.000002 0.000000 0.371891 0.376E+03 lgRho_cntr log_rel_run_E_err -6.6850112646975486 rel_E_err 6.1353365388066845D-12 k, q, energy_removed_layers before adjustment is 688 0.99995384743720117 1.0092034176356819E+048 k, q, energy_removed_layers after adjustment is 698 0.99994051202274181 1.0213651793264828E+048 Layers above q= 0.99994051202274181 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10472.724609375000 max vel inside fraction of cutoff 3926.8456789507418 max c/cs inside fraction of cutoff 2.3571925768956974 average v/vesc outside cutoff 1.5166922841819177 Kinetic plus potential energy outside cutoff 1.0213651793264828E+048 mass inside cutoff 698 51.727786385795305 relax counter 0 log max v [km/s]= 5.4470085103000301 check gamma integral 4.4052477737026953E-002 2790 8.930372 9.436E+04 -15.995696 3.262855 51.730864 0.000000 0.000000 0.000000 0.217143 -2.867796 3005 21 -7.8516E+00 8.930372 1.388731 1.080548 8.239086 -99.000000 51.730864 0.000000 0.059838 0.782857 0.625993 3 2.8747E+05 4.456630 7.631399 3.259992 -10.634664 -10.296471 49.084341 0.000002 0.000000 0.371891 0.390E+03 lgRho_cntr log_rel_run_E_err -6.6848868553604612 rel_E_err 5.7784374466669245D-12 k, q, energy_removed_layers before adjustment is 693 0.99995241327594919 1.0208486910886150E+048 k, q, energy_removed_layers after adjustment is 704 0.99993787860129557 1.0336782142029389E+048 Layers above q= 0.99993787860129557 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10477.433593750000 max vel inside fraction of cutoff 3968.6272166145391 max c/cs inside fraction of cutoff 2.4541880897427246 average v/vesc outside cutoff 1.5216698078756674 Kinetic plus potential energy outside cutoff 1.0336782142029389E+048 mass inside cutoff 704 51.727650156629267 relax counter 0 log max v [km/s]= 5.4529798000247771 check gamma integral 4.4771630634950821E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2800 8.910092 8.921E+04 -16.132842 3.032524 51.730864 0.000000 0.000000 0.000000 0.217143 -2.920000 3008 21 -7.6739E+00 8.910092 1.425551 0.365155 7.900560 -99.000000 51.730864 0.000000 0.059838 0.782857 0.627672 4 2.8747E+05 4.399281 7.607517 3.031588 -12.303786 -10.370137 49.084341 0.000002 0.000000 0.371891 0.407E+03 lgRho_cntr log_rel_run_E_err -6.6847718238110838 rel_E_err 5.2958297894891278D-12 save LOGS/profile14.data for model 2800 save photos/x800 for model 2800 k, q, energy_removed_layers before adjustment is 700 0.99994960382244058 1.0355069010071224E+048 k, q, energy_removed_layers after adjustment is 711 0.99993503063645572 1.0467005518490742E+048 Layers above q= 0.99993503063645572 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10482.701171875000 max vel inside fraction of cutoff 4005.1114187753842 max c/cs inside fraction of cutoff 2.5582856142495558 average v/vesc outside cutoff 1.5281746009118269 Kinetic plus potential energy outside cutoff 1.0467005518490742E+048 mass inside cutoff 711 51.727502828948175 relax counter 0 log max v [km/s]= 5.4592020231960294 check gamma integral 4.5469667175945340E-002 2810 8.890329 8.443E+04 -16.267921 2.895950 51.730864 0.000000 0.000000 0.000000 0.217143 -2.970902 3007 21 -7.7800E+00 8.890329 1.461429 -0.381841 7.562165 -99.000000 51.730864 0.000000 0.059838 0.782857 0.629377 4 2.8747E+05 4.343524 7.583593 2.895721 -14.002058 -10.441917 49.084341 0.000002 0.000000 0.371891 0.424E+03 lgRho_cntr log_rel_run_E_err -6.6846647333065121 rel_E_err 5.0294787329089281D-12 k, q, energy_removed_layers before adjustment is 704 0.99994813625235068 1.0472207604686969E+048 k, q, energy_removed_layers after adjustment is 716 0.99993196198206002 1.0598623532926976E+048 Layers above q= 0.99993196198206002 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10488.203125000000 max vel inside fraction of cutoff 4033.5145452785109 max c/cs inside fraction of cutoff 2.6622242343406679 average v/vesc outside cutoff 1.5324187226744530 Kinetic plus potential energy outside cutoff 1.0598623532926976E+048 mass inside cutoff 716 51.727344084805729 relax counter 0 log max v [km/s]= 5.4652370865772610 check gamma integral 4.6113478839795996E-002 2820 8.870703 7.989E+04 -16.403498 2.808385 51.730864 0.000000 0.000000 0.000000 0.217143 -3.021526 3011 21 -7.6868E+00 8.870703 1.497129 -1.175542 7.220277 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631128 4 2.8747E+05 4.288267 7.559001 2.808340 -15.761769 -10.513342 49.084341 0.000002 0.000000 0.371891 0.443E+03 max increase log_rel_run_E_err -6.6845630098953945 rel_E_err 4.7708781015188164D-12 k, q, energy_removed_layers before adjustment is 714 0.99994545277834246 1.0601033021837860E+048 k, q, energy_removed_layers after adjustment is 727 0.99992567421531586 1.0740033524985316E+048 Layers above q= 0.99992567421531586 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10494.066406250000 max vel inside fraction of cutoff 4054.8288577432027 max c/cs inside fraction of cutoff 2.7679957570750711 average v/vesc outside cutoff 1.5214116164250777 Kinetic plus potential energy outside cutoff 1.0740033524985316E+048 mass inside cutoff 727 51.727018813200999 relax counter 0 log max v [km/s]= 5.4712026614247620 check gamma integral 4.6728946084001216E-002 Warning: maximum velocity exceeds speed of light 1 0.2997948110E+11 0.1000007849E+01 Warning: maximum velocity exceeds speed of light 1 0.3001932483E+11 0.1001336893E+01 2830 8.850220 7.537E+04 -16.546589 2.736943 51.730864 0.000000 0.000000 0.000000 0.217143 -3.074486 3008 21 -7.6952E+00 8.850220 1.534562 -2.063225 6.862028 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633008 5 2.8747E+05 4.230694 7.532552 2.736936 -17.679966 -10.588234 49.084341 0.000002 0.000000 0.371891 0.463E+03 lgRho_cntr log_rel_run_E_err -6.6844666923251213 rel_E_err 4.4192720459690552D-12 k, q, energy_removed_layers before adjustment is 775 0.99915998627989855 3.5439656001245959E+048 k, q, energy_removed_layers after adjustment is 811 0.99632990392352738 6.9179987592358125E+048 Layers above q= 0.99632990392352738 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10500.662109375000 max vel inside fraction of cutoff 3905.8872519681222 max c/cs inside fraction of cutoff 2.6938641121304321 average v/vesc outside cutoff 0.98047220576608929 Kinetic plus potential energy outside cutoff 6.9179987592358125E+048 mass inside cutoff 811 51.541006510159320 relax counter 0 log max v [km/s]= 5.4774009202059757 check gamma integral 4.7354435719864786E-002 Warning: maximum velocity exceeds speed of light 1 0.3005749974E+11 0.1002610271E+01 Warning: maximum velocity exceeds speed of light 1 0.3009490065E+11 0.1003857830E+01 Warning: maximum velocity exceeds speed of light 1 0.3013194708E+11 0.1005093566E+01 Warning: maximum velocity exceeds speed of light 1 0.3017609328E+11 0.1006566125E+01 Warning: maximum velocity exceeds speed of light 1 0.3022862366E+11 0.1008318350E+01 Warning: maximum velocity exceeds speed of light 1 0.3027251094E+11 0.1009782272E+01 Warning: maximum velocity exceeds speed of light 1 0.3031269307E+11 0.1011122604E+01 Warning: maximum velocity exceeds speed of light 1 0.3035118481E+11 0.1012406550E+01 Warning: maximum velocity exceeds speed of light 1 0.3038888778E+11 0.1013664186E+01 Warning: maximum velocity exceeds speed of light 1 0.3042622571E+11 0.1014909645E+01 2840 8.830841 7.128E+04 -16.683500 2.681048 51.730864 0.000000 0.000000 0.000000 0.217143 -3.124704 3011 21 -7.6949E+00 8.830841 1.570214 -2.962550 6.529183 -99.000000 51.730864 0.000000 0.059838 0.782857 0.634838 5 2.8747E+05 4.176315 7.506993 2.681047 -19.575214 -10.659564 49.084341 0.000002 0.000000 0.371891 0.483E+03 lgRho_cntr log_rel_run_E_err -6.6843751865518692 rel_E_err 4.4362852307396915D-12 k, q, energy_removed_layers before adjustment is 790 0.99853384519510802 6.5064479453754368E+048 k, q, energy_removed_layers after adjustment is 822 0.99528551031672441 1.0676654310074320E+049 Layers above q= 0.99528551031672441 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10507.398437500000 max vel inside fraction of cutoff 3850.2879855258907 max c/cs inside fraction of cutoff 2.7268477324036779 average v/vesc outside cutoff 1.0139571784262391 Kinetic plus potential energy outside cutoff 1.0676654310074320E+049 mass inside cutoff 822 51.486979126784171 relax counter 0 log max v [km/s]= 5.4832480827170995 check gamma integral 4.7935528294242857E-002 Warning: maximum velocity exceeds speed of light 1 0.3047069884E+11 0.1016393109E+01 Warning: maximum velocity exceeds speed of light 1 0.3052359297E+11 0.1018157467E+01 Warning: maximum velocity exceeds speed of light 1 0.3056779992E+11 0.1019632052E+01 Warning: maximum velocity exceeds speed of light 1 0.3060827907E+11 0.1020982291E+01 Warning: maximum velocity exceeds speed of light 1 0.3064705727E+11 0.1022275793E+01 Warning: maximum velocity exceeds speed of light 1 0.3068504170E+11 0.1023542817E+01 Warning: maximum velocity exceeds speed of light 1 0.3072265875E+11 0.1024797587E+01 Warning: maximum velocity exceeds speed of light 1 0.3076745232E+11 0.1026291740E+01 Warning: maximum velocity exceeds speed of light 1 0.3082071144E+11 0.1028068273E+01 Warning: maximum velocity exceeds speed of light 1 0.3086523480E+11 0.1029553412E+01 2850 8.810144 6.707E+04 -16.831429 2.624774 51.730864 0.000000 0.000000 0.000000 0.217143 -3.178490 3011 21 -7.5859E+00 8.810144 1.608668 -3.992737 6.191898 -99.000000 51.730864 0.000000 0.059838 0.782857 0.636837 5 2.8747E+05 4.118322 7.478050 2.624774 -21.689752 -10.736497 49.084341 0.000002 0.000000 0.371891 0.507E+03 lgRho_cntr log_rel_run_E_err -6.6842884848392883 rel_E_err 4.1317490250446309D-12 save photos/x850 for model 2850 k, q, energy_removed_layers before adjustment is 799 0.99770663695797313 1.0725812566353920E+049 k, q, energy_removed_layers after adjustment is 831 0.99386079436825470 1.5333626310748139E+049 Layers above q= 0.99386079436825470 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10515.208984375000 max vel inside fraction of cutoff 3799.1258887085050 max c/cs inside fraction of cutoff 2.7813130383233657 average v/vesc outside cutoff 1.0093170769723623 Kinetic plus potential energy outside cutoff 1.5333626310748139E+049 mass inside cutoff 831 51.413277340171085 relax counter 0 log max v [km/s]= 5.4894695851048976 check gamma integral 4.8548462559718550E-002 Warning: maximum velocity exceeds speed of light 1 0.3090601084E+11 0.1030913554E+01 Warning: maximum velocity exceeds speed of light 1 0.3094507816E+11 0.1032216700E+01 Warning: maximum velocity exceeds speed of light 1 0.3098334967E+11 0.1033493300E+01 Warning: maximum velocity exceeds speed of light 1 0.3102125381E+11 0.1034757646E+01 Warning: maximum velocity exceeds speed of light 1 0.3106637950E+11 0.1036262877E+01 Warning: maximum velocity exceeds speed of light 1 0.3112002021E+11 0.1038052138E+01 Warning: maximum velocity exceeds speed of light 1 0.3116487674E+11 0.1039548391E+01 Warning: maximum velocity exceeds speed of light 1 0.3120596710E+11 0.1040919018E+01 Warning: maximum velocity exceeds speed of light 1 0.3124534188E+11 0.1042232419E+01 Warning: maximum velocity exceeds speed of light 1 0.3128391867E+11 0.1043519203E+01 2860 8.790609 6.325E+04 -16.972709 2.572349 51.730864 0.000000 0.000000 0.000000 0.217143 -3.229371 3012 21 -7.6162E+00 8.790609 1.645400 -5.036047 5.902795 -99.000000 51.730864 0.000000 0.059838 0.782857 0.638773 5 2.8747E+05 4.063670 7.449832 2.572349 -23.775322 -10.809985 49.084341 0.000002 0.000000 0.371891 0.530E+03 lgRho_cntr log_rel_run_E_err -6.6842070868154311 rel_E_err 3.6967785596861362D-12 k, q, energy_removed_layers before adjustment is 809 0.99690769311166283 1.5179654620773477E+049 k, q, energy_removed_layers after adjustment is 837 0.99261826308102774 2.0198286115251106E+049 Layers above q= 0.99261826308102774 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10523.228515625000 max vel inside fraction of cutoff 3720.9275445110488 max c/cs inside fraction of cutoff 2.7993830530169124 average v/vesc outside cutoff 1.0323133023330742 Kinetic plus potential energy outside cutoff 2.0198286115251106E+049 mass inside cutoff 837 51.349000123446139 relax counter 0 log max v [km/s]= 5.4953211482288795 check gamma integral 4.9121842390957834E-002 Warning: maximum velocity exceeds speed of light 1 0.3132212877E+11 0.1044793754E+01 Warning: maximum velocity exceeds speed of light 1 0.3136760964E+11 0.1046310833E+01 Warning: maximum velocity exceeds speed of light 1 0.3142166021E+11 0.1048113766E+01 Warning: maximum velocity exceeds speed of light 1 0.3146687572E+11 0.1049621993E+01 Warning: maximum velocity exceeds speed of light 1 0.3150830839E+11 0.1051004038E+01 Warning: maximum velocity exceeds speed of light 1 0.3154802585E+11 0.1052328870E+01 Warning: maximum velocity exceeds speed of light 1 0.3158695478E+11 0.1053627399E+01 Warning: maximum velocity exceeds speed of light 1 0.3162554063E+11 0.1054914485E+01 Warning: maximum velocity exceeds speed of light 1 0.3167148957E+11 0.1056447176E+01 Warning: maximum velocity exceeds speed of light 1 0.3172611358E+11 0.1058269237E+01 2870 8.770223 5.947E+04 -17.121886 2.517832 51.730864 0.000000 0.000000 0.000000 0.217143 -3.282607 3014 21 -7.4316E+00 8.770223 1.684311 -6.205517 5.639802 -99.000000 51.730864 0.000000 0.059838 0.782857 0.640836 5 2.8747E+05 4.006716 7.420496 2.517832 -26.049009 -10.887834 49.084341 0.000002 0.000000 0.371891 0.556E+03 lgRho_cntr log_rel_run_E_err -6.6841297515354778 rel_E_err 3.6619960188902078D-12 k, q, energy_removed_layers before adjustment is 819 0.99603990024324740 2.0285535808044425E+049 k, q, energy_removed_layers after adjustment is 846 0.99127190215040739 2.5593040557946337E+049 Layers above q= 0.99127190215040739 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10532.367187500000 max vel inside fraction of cutoff 3650.9345775167776 max c/cs inside fraction of cutoff 2.8473627462863278 average v/vesc outside cutoff 1.0530922081611305 Kinetic plus potential energy outside cutoff 2.5593040557946337E+049 mass inside cutoff 846 51.279351709585569 relax counter 0 log max v [km/s]= 5.5014168746734828 check gamma integral 4.9716388611263838E-002 Warning: maximum velocity exceeds speed of light 1 0.3177184013E+11 0.1059794510E+01 Warning: maximum velocity exceeds speed of light 1 0.3181376028E+11 0.1061192816E+01 Warning: maximum velocity exceeds speed of light 1 0.3185395793E+11 0.1062533666E+01 Warning: maximum velocity exceeds speed of light 1 0.3189336555E+11 0.1063848162E+01 Warning: maximum velocity exceeds speed of light 1 0.3193241891E+11 0.1065150842E+01 Warning: maximum velocity exceeds speed of light 1 0.3197889440E+11 0.1066701098E+01 Warning: maximum velocity exceeds speed of light 1 0.3203411154E+11 0.1068542943E+01 Warning: maximum velocity exceeds speed of light 1 0.3208034897E+11 0.1070085258E+01 Warning: maximum velocity exceeds speed of light 1 0.3212274465E+11 0.1071499425E+01 Warning: maximum velocity exceeds speed of light 1 0.3216339629E+11 0.1072855418E+01 2880 8.750387 5.594E+04 -17.268755 2.464839 51.730864 0.000000 0.000000 0.000000 0.217143 -3.334518 3014 21 -7.5260E+00 8.750387 1.722846 -7.429632 5.421203 -99.000000 51.730864 0.000000 0.059838 0.782857 0.642891 5 2.8747E+05 3.951377 7.391161 2.464839 -28.361267 -10.964930 49.084341 0.000002 0.000000 0.371891 0.583E+03 lgRho_cntr log_rel_run_E_err -6.6840564208572424 rel_E_err 3.3861931957000579D-12 k, q, energy_removed_layers before adjustment is 825 0.99507388778421824 2.5590214379788848E+049 k, q, energy_removed_layers after adjustment is 851 0.99004148548456283 3.1043655798574241E+049 Layers above q= 0.99004148548456283 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10542.125000000000 max vel inside fraction of cutoff 3580.4643618612690 max c/cs inside fraction of cutoff 2.8985583834531341 average v/vesc outside cutoff 1.0532855445889273 Kinetic plus potential energy outside cutoff 3.1043655798574241E+049 mass inside cutoff 851 51.215701192688741 relax counter 0 log max v [km/s]= 5.5073619017714348 check gamma integral 5.0292022527848632E-002 Warning: maximum velocity exceeds speed of light 1 0.3220324283E+11 0.1074184556E+01 Warning: maximum velocity exceeds speed of light 1 0.3225063981E+11 0.1075765549E+01 Warning: maximum velocity exceeds speed of light 1 0.3230692847E+11 0.1077643136E+01 Warning: maximum velocity exceeds speed of light 1 0.3235383716E+11 0.1079207842E+01 Warning: maximum velocity exceeds speed of light 1 0.3239675394E+11 0.1080639392E+01 Warning: maximum velocity exceeds speed of light 1 0.3243786756E+11 0.1082010794E+01 Warning: maximum velocity exceeds speed of light 1 0.3247815406E+11 0.1083354607E+01 Warning: maximum velocity exceeds speed of light 1 0.3252606373E+11 0.1084952702E+01 Warning: maximum velocity exceeds speed of light 1 0.3258291651E+11 0.1086849106E+01 Warning: maximum velocity exceeds speed of light 1 0.3263030076E+11 0.1088429675E+01 2890 8.729552 5.235E+04 -17.424910 2.409187 51.730864 0.000000 0.000000 0.000000 0.217143 -3.389172 3010 21 -7.4215E+00 8.729552 1.764215 -8.817857 5.222225 -99.000000 51.730864 0.000000 0.059838 0.782857 0.645094 5 2.8747E+05 3.893330 7.358687 2.409187 -30.901181 -11.047694 49.084341 0.000002 0.000000 0.371891 0.615E+03 lgRho_cntr log_rel_run_E_err -6.6839878439912619 rel_E_err 3.1540577004574037D-12 k, q, energy_removed_layers before adjustment is 827 0.99399195149453989 3.1524139502485477E+049 k, q, energy_removed_layers after adjustment is 851 0.98876225518870053 3.6849498325017290E+049 Layers above q= 0.98876225518870053 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10553.451171875000 max vel inside fraction of cutoff 3478.3764500889051 max c/cs inside fraction of cutoff 2.9118468580314847 average v/vesc outside cutoff 1.0720723935100118 Kinetic plus potential energy outside cutoff 3.6849498325017290E+049 mass inside cutoff 851 51.149525504548308 relax counter 0 log max v [km/s]= 5.5136210767702094 check gamma integral 5.0894537299929050E-002 Warning: maximum velocity exceeds speed of light 1 0.3267366356E+11 0.1089876102E+01 Warning: maximum velocity exceeds speed of light 1 0.3271521388E+11 0.1091262072E+01 Warning: maximum velocity exceeds speed of light 1 0.3275593357E+11 0.1092620334E+01 Warning: maximum velocity exceeds speed of light 1 0.3280433989E+11 0.1094234996E+01 Warning: maximum velocity exceeds speed of light 1 0.3286177452E+11 0.1096150809E+01 Warning: maximum velocity exceeds speed of light 1 0.3290965547E+11 0.1097747945E+01 Warning: maximum velocity exceeds speed of light 1 0.3295347055E+11 0.1099209459E+01 Warning: maximum velocity exceeds speed of light 1 0.3299544820E+11 0.1100609682E+01 Warning: maximum velocity exceeds speed of light 1 0.3303658180E+11 0.1101981752E+01 Warning: maximum velocity exceeds speed of light 1 0.3308545318E+11 0.1103611925E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 2900 8.709596 4.902E+04 -17.576318 2.355894 51.730864 0.000000 0.000000 0.000000 0.217143 -3.441607 3013 21 -7.3693E+00 8.709596 1.804857 -10.257213 5.050351 -99.000000 51.730864 0.000000 0.059838 0.782857 0.647253 5 2.8747E+05 3.837816 7.325925 2.355894 -33.445845 -11.129004 49.084341 0.000002 0.000000 0.371891 0.647E+03 max increase log_rel_run_E_err -6.6839227320657661 rel_E_err 3.0098237878385470D-12 save LOGS/profile15.data for model 2900 save photos/x900 for model 2900 k, q, energy_removed_layers before adjustment is 834 0.99285074512163951 3.7620817104581303E+049 k, q, energy_removed_layers after adjustment is 855 0.98787235378331206 4.2394115316133331E+049 Layers above q= 0.98787235378331206 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10565.509765625000 max vel inside fraction of cutoff 3411.1024040184961 max c/cs inside fraction of cutoff 2.9795368110750053 average v/vesc outside cutoff 1.1086266779720519 Kinetic plus potential energy outside cutoff 4.2394115316133331E+049 mass inside cutoff 855 51.103490136195006 relax counter 0 log max v [km/s]= 5.5196370876669523 check gamma integral 5.1470209035191741E-002 Warning: maximum velocity exceeds speed of light 1 0.3314340643E+11 0.1105545038E+01 Warning: maximum velocity exceeds speed of light 1 0.3319174170E+11 0.1107157329E+01 Warning: maximum velocity exceeds speed of light 1 0.3323598890E+11 0.1108633257E+01 Warning: maximum velocity exceeds speed of light 1 0.3327839492E+11 0.1110047769E+01 Warning: maximum velocity exceeds speed of light 1 0.3331996273E+11 0.1111434322E+01 Warning: maximum velocity exceeds speed of light 1 0.3336934258E+11 0.1113081456E+01 Warning: maximum velocity exceeds speed of light 1 0.3342788496E+11 0.1115034220E+01 Warning: maximum velocity exceeds speed of light 1 0.3347675984E+11 0.1116664511E+01 Warning: maximum velocity exceeds speed of light 1 0.3352152593E+11 0.1118157747E+01 Warning: maximum velocity exceeds speed of light 1 0.3356444381E+11 0.1119589333E+01 2910 8.688969 4.569E+04 -17.734771 2.300812 51.730864 0.000000 0.000000 0.000000 0.217143 -3.495906 3010 21 -7.3829E+00 8.688969 1.848167 -11.872838 4.883073 -99.000000 51.730864 0.000000 0.059838 0.782857 0.649531 5 2.8747E+05 3.780513 7.290334 2.300812 -36.196887 -11.215652 49.084341 0.000002 0.000000 0.371891 0.684E+03 lgRho_cntr log_rel_run_E_err -6.6838613965090614 rel_E_err 2.8355330369498222D-12 k, q, energy_removed_layers before adjustment is 836 0.99180313018170607 4.3297914118077000E+049 k, q, energy_removed_layers after adjustment is 856 0.98636710517958825 4.8022885062045693E+049 Layers above q= 0.98636710517958825 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10579.464843750000 max vel inside fraction of cutoff 3280.8976372390889 max c/cs inside fraction of cutoff 2.9714566564511911 average v/vesc outside cutoff 1.1087415370524123 Kinetic plus potential energy outside cutoff 4.8022885062045693E+049 mass inside cutoff 856 51.025622325765525 relax counter 0 log max v [km/s]= 5.5258794549629275 check gamma integral 5.2064543756070454E-002 Warning: maximum velocity exceeds speed of light 1 0.3360652159E+11 0.1120992897E+01 Warning: maximum velocity exceeds speed of light 1 0.3365648380E+11 0.1122659457E+01 Warning: maximum velocity exceeds speed of light 1 0.3371568870E+11 0.1124634320E+01 Warning: maximum velocity exceeds speed of light 1 0.3376514297E+11 0.1126283936E+01 Warning: maximum velocity exceeds speed of light 1 0.3381046462E+11 0.1127795704E+01 Warning: maximum velocity exceeds speed of light 1 0.3385393518E+11 0.1129245726E+01 Warning: maximum velocity exceeds speed of light 1 0.3389657190E+11 0.1130667934E+01 Warning: maximum velocity exceeds speed of light 1 0.3394718347E+11 0.1132356154E+01 Warning: maximum velocity exceeds speed of light 1 0.3400713910E+11 0.1134356058E+01 Warning: maximum velocity exceeds speed of light 1 0.3405727251E+11 0.1136028329E+01 2920 8.668213 4.245E+04 -17.896249 2.245391 51.730864 0.000000 0.000000 0.000000 0.217143 -3.550631 3019 21 -7.2697E+00 8.668213 1.893391 -13.641956 4.719806 -99.000000 51.730864 0.000000 0.059838 0.782857 0.651873 5 2.8747E+05 3.722933 7.253023 2.245391 -39.095200 -11.306128 49.084341 0.000002 0.000000 0.371891 0.724E+03 lgRho_cntr log_rel_run_E_err -6.6838033336434020 rel_E_err 2.6351555891097433D-12 k, q, energy_removed_layers before adjustment is 848 0.99072318845016827 4.9231160723339815E+049 k, q, energy_removed_layers after adjustment is 867 0.98534604660011971 5.3516250295235022E+049 Layers above q= 0.98534604660011971 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10595.369140625000 max vel inside fraction of cutoff 3195.9807195497710 max c/cs inside fraction of cutoff 3.0314926605485550 average v/vesc outside cutoff 1.1482462322474374 Kinetic plus potential energy outside cutoff 5.3516250295235022E+049 mass inside cutoff 867 50.972802083510025 relax counter 0 log max v [km/s]= 5.5322098644186539 check gamma integral 5.2662539994089465E-002 Warning: maximum velocity exceeds speed of light 1 0.3410325292E+11 0.1137562070E+01 Warning: maximum velocity exceeds speed of light 1 0.3414738343E+11 0.1139034106E+01 Warning: maximum velocity exceeds speed of light 1 0.3419069202E+11 0.1140478725E+01 Warning: maximum velocity exceeds speed of light 1 0.3424209115E+11 0.1142193215E+01 Warning: maximum velocity exceeds speed of light 1 0.3430296581E+11 0.1144223775E+01 Warning: maximum velocity exceeds speed of light 1 0.3435393329E+11 0.1145923867E+01 Warning: maximum velocity exceeds speed of light 1 0.3440072417E+11 0.1147484643E+01 Warning: maximum velocity exceeds speed of light 1 0.3444569096E+11 0.1148984574E+01 Warning: maximum velocity exceeds speed of light 1 0.3448985960E+11 0.1150457881E+01 Warning: maximum velocity exceeds speed of light 1 0.3454227159E+11 0.1152206157E+01 2930 8.648360 3.947E+04 -18.052638 2.192398 51.730864 0.000000 0.000000 0.000000 0.217143 -3.603029 3023 21 -7.2053E+00 8.648360 1.938571 -15.447436 4.565609 -99.000000 51.730864 0.000000 0.059838 0.782857 0.654163 5 2.8747E+05 3.667943 7.216905 2.192398 -41.995314 -11.396515 49.084341 0.000002 0.000000 0.371891 0.766E+03 max increase log_rel_run_E_err -6.6837489578098896 rel_E_err 2.5633222936336462D-12 k, q, energy_removed_layers before adjustment is 855 0.98940391826076124 5.4883942113978404E+049 k, q, energy_removed_layers after adjustment is 871 0.98449598984891995 5.8576563831829656E+049 Layers above q= 0.98449598984891995 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10612.750000000000 max vel inside fraction of cutoff 3089.9450284736854 max c/cs inside fraction of cutoff 3.0609147982052134 average v/vesc outside cutoff 1.1615513586258244 Kinetic plus potential energy outside cutoff 5.8576563831829656E+049 mass inside cutoff 871 50.928827913533738 relax counter 0 log max v [km/s]= 5.5383508944525861 check gamma integral 5.3235108236639517E-002 Warning: maximum velocity exceeds speed of light 1 0.3460433080E+11 0.1154276229E+01 Warning: maximum velocity exceeds speed of light 1 0.3465637340E+11 0.1156012183E+01 Warning: maximum velocity exceeds speed of light 1 0.3470420127E+11 0.1157607550E+01 Warning: maximum velocity exceeds speed of light 1 0.3475018059E+11 0.1159141255E+01 Warning: maximum velocity exceeds speed of light 1 0.3479536613E+11 0.1160648482E+01 Warning: maximum velocity exceeds speed of light 1 0.3484895365E+11 0.1162435969E+01 Warning: maximum velocity exceeds speed of light 1 0.3491236549E+11 0.1164551161E+01 Warning: maximum velocity exceeds speed of light 1 0.3496562928E+11 0.1166327849E+01 Warning: maximum velocity exceeds speed of light 1 0.3501464945E+11 0.1167962986E+01 Warning: maximum velocity exceeds speed of light 1 0.3506182804E+11 0.1169536695E+01 2940 8.627915 3.648E+04 -18.215756 2.137831 51.730864 0.000000 0.000000 0.000000 0.217143 -3.657059 3027 21 -7.2015E+00 8.627915 1.987698 -17.269762 4.407415 -99.000000 51.730864 0.000000 0.059838 0.782857 0.656568 5 2.8747E+05 3.611388 7.178162 2.137831 -45.119327 -11.494800 49.084341 0.000002 0.000000 0.371891 0.813E+03 lgRho_cntr log_rel_run_E_err -6.6836972482448669 rel_E_err 2.4308087530469447D-12 k, q, energy_removed_layers before adjustment is 859 0.98855400458462450 5.9998455648296295E+049 k, q, energy_removed_layers after adjustment is 874 0.98348247201662797 6.3538916507067732E+049 Layers above q= 0.98348247201662797 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10633.515625000000 max vel inside fraction of cutoff 2986.3978896152835 max c/cs inside fraction of cutoff 3.1140863250467063 average v/vesc outside cutoff 1.1885523908850033 Kinetic plus potential energy outside cutoff 6.3538916507067732E+049 mass inside cutoff 874 50.876397760643002 relax counter 0 log max v [km/s]= 5.5448345554322156 check gamma integral 5.3826446714504921E-002 Warning: maximum velocity exceeds speed of light 1 0.3510823535E+11 0.1171084676E+01 Warning: maximum velocity exceeds speed of light 1 0.3516324644E+11 0.1172919648E+01 Warning: maximum velocity exceeds speed of light 1 0.3522830724E+11 0.1175089843E+01 Warning: maximum velocity exceeds speed of light 1 0.3528307605E+11 0.1176916734E+01 Warning: maximum velocity exceeds speed of light 1 0.3533356848E+11 0.1178600980E+01 Warning: maximum velocity exceeds speed of light 1 0.3538223199E+11 0.1180224220E+01 Warning: maximum velocity exceeds speed of light 1 0.3543015983E+11 0.1181822921E+01 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/eosDT_data/cache/mesa-FreeEOS_90z00x_CO.bin Warning: maximum velocity exceeds speed of light 1 0.3548694752E+11 0.1183717154E+01 Warning: maximum velocity exceeds speed of light 1 0.3555406860E+11 0.1185956072E+01 Warning: maximum velocity exceeds speed of light 1 0.3561072888E+11 0.1187846056E+01 2950 8.607443 3.353E+04 -18.381221 2.083264 51.730864 0.000000 0.000000 0.000000 0.217143 -3.711205 3027 21 -7.0687E+00 8.607443 2.040481 -18.944591 4.248995 -99.000000 51.730864 0.000000 0.059838 0.782857 0.659027 5 2.8747E+05 3.554844 7.137513 2.083264 -48.393618 -11.600398 49.084341 0.000002 0.000000 0.371891 0.865E+03 lgRho_cntr log_rel_run_E_err -6.6836492728537742 rel_E_err 2.1962156715741968D-12 save photos/x950 for model 2950 k, q, energy_removed_layers before adjustment is 861 0.98705902517176181 6.5562634734313491E+049 k, q, energy_removed_layers after adjustment is 875 0.98238960844213241 6.8257828028834865E+049 Layers above q= 0.98238960844213241 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10658.222656250000 max vel inside fraction of cutoff 2864.9498678881596 max c/cs inside fraction of cutoff 3.1510305837093329 average v/vesc outside cutoff 1.2099508947033981 Kinetic plus potential energy outside cutoff 6.8257828028834865E+049 mass inside cutoff 875 50.819862983973167 relax counter 0 log max v [km/s]= 5.5515808629042507 check gamma integral 5.4421377782162633E-002 Warning: maximum velocity exceeds speed of light 1 0.3566307377E+11 0.1189592094E+01 Warning: maximum velocity exceeds speed of light 1 0.3571360562E+11 0.1191277654E+01 Warning: maximum velocity exceeds speed of light 1 0.3577342217E+11 0.1193272920E+01 Warning: maximum velocity exceeds speed of light 1 0.3584404963E+11 0.1195628798E+01 Warning: maximum velocity exceeds speed of light 1 0.3590326063E+11 0.1197603865E+01 Warning: maximum velocity exceeds speed of light 1 0.3595782722E+11 0.1199424010E+01 Warning: maximum velocity exceeds speed of light 1 0.3601047999E+11 0.1201180318E+01 Warning: maximum velocity exceeds speed of light 1 0.3607274859E+11 0.1203257375E+01 Warning: maximum velocity exceeds speed of light 1 0.3614619831E+11 0.1205707393E+01 Warning: maximum velocity exceeds speed of light 1 0.3620796349E+11 0.1207767658E+01 2960 8.586824 3.056E+04 -18.550112 2.034163 51.730864 0.000000 0.000000 0.000000 0.217143 -3.765783 3022 21 -6.9712E+00 8.586824 2.099012 -20.705728 4.089086 -99.000000 51.730864 0.000000 0.059838 0.782857 0.661555 5 2.8747E+05 3.497974 7.093215 2.034163 -51.847039 -11.717494 49.084341 0.000002 0.000000 0.371891 0.926E+03 lgRho_cntr log_rel_run_E_err -6.6836040405126882 rel_E_err 2.0786358922570411D-12 k, q, energy_removed_layers before adjustment is 854 0.98613488989924469 7.0250993573331812E+049 k, q, energy_removed_layers after adjustment is 868 0.98165150189813788 7.2798140923102585E+049 Layers above q= 0.98165150189813788 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10688.869140625000 max vel inside fraction of cutoff 2730.1111740468154 max c/cs inside fraction of cutoff 3.1852725371628785 average v/vesc outside cutoff 1.2525122073958477 Kinetic plus potential energy outside cutoff 7.2798140923102585E+049 mass inside cutoff 868 50.781680094912630 relax counter 0 log max v [km/s]= 5.5588040986531873 check gamma integral 5.5025099826931448E-002 Warning: maximum velocity exceeds speed of light 1 0.3626503548E+11 0.1209671375E+01 Warning: maximum velocity exceeds speed of light 1 0.3632023480E+11 0.1211512626E+01 Warning: maximum velocity exceeds speed of light 1 0.3638544523E+11 0.1213687812E+01 Warning: maximum velocity exceeds speed of light 1 0.3646225971E+11 0.1216250067E+01 Warning: maximum velocity exceeds speed of light 1 0.3652722435E+11 0.1218417054E+01 Warning: maximum velocity exceeds speed of light 1 0.3658752098E+11 0.1220428333E+01 Warning: maximum velocity exceeds speed of light 1 0.3664605508E+11 0.1222380820E+01 Warning: maximum velocity exceeds speed of light 1 0.3671511977E+11 0.1224684570E+01 Warning: maximum velocity exceeds speed of light 1 0.3679635526E+11 0.1227394295E+01 Warning: maximum velocity exceeds speed of light 1 0.3686562535E+11 0.1229704896E+01 2970 8.566643 2.753E+04 -18.717641 1.986862 51.730864 0.000000 0.000000 0.000000 0.217143 -3.819221 3021 21 -6.8520E+00 8.566643 2.165032 -22.738350 3.932022 -99.000000 51.730864 0.000000 0.059838 0.782857 0.664081 5 2.8747E+05 3.442398 7.044036 1.986862 -55.385572 -11.849573 49.084341 0.000002 0.000000 0.371891 0.997E+03 lgRho_cntr log_rel_run_E_err -6.6835619101771888 rel_E_err 1.9313773843347472D-12 k, q, energy_removed_layers before adjustment is 853 0.98508695638455646 7.4915867197742916E+049 k, q, energy_removed_layers after adjustment is 865 0.98068864118827070 7.7122554196335234E+049 Layers above q= 0.98068864118827070 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10728.091796875000 max vel inside fraction of cutoff 2580.1444445214947 max c/cs inside fraction of cutoff 3.2222036105294118 average v/vesc outside cutoff 1.2767662150636203 Kinetic plus potential energy outside cutoff 7.7122554196335234E+049 mass inside cutoff 865 50.731870478720019 relax counter 0 log max v [km/s]= 5.5666216051911048 check gamma integral 5.5622836950655834E-002 Warning: maximum velocity exceeds speed of light 1 0.3693034095E+11 0.1231863577E+01 Warning: maximum velocity exceeds speed of light 1 0.3700652396E+11 0.1234404768E+01 Warning: maximum velocity exceeds speed of light 1 0.3709588319E+11 0.1237385471E+01 Warning: maximum velocity exceeds speed of light 1 0.3717145553E+11 0.1239906293E+01 Warning: maximum velocity exceeds speed of light 1 0.3724204099E+11 0.1242260771E+01 Warning: maximum velocity exceeds speed of light 1 0.3732492966E+11 0.1245025639E+01 Warning: maximum velocity exceeds speed of light 1 0.3742188279E+11 0.1248259647E+01 Warning: maximum velocity exceeds speed of light 1 0.3750505901E+11 0.1251034107E+01 Warning: maximum velocity exceeds speed of light 1 0.3758376207E+11 0.1253659359E+01 Warning: maximum velocity exceeds speed of light 1 0.3767586961E+11 0.1256731736E+01 2980 8.546754 2.412E+04 -18.885046 1.940079 51.730864 0.000000 0.000000 0.000000 0.217143 -3.871903 3025 21 -6.6364E+00 8.546754 2.249248 -25.416494 3.776344 -99.000000 51.730864 0.000000 0.059838 0.782857 0.666622 5 2.8747E+05 3.387704 6.982603 1.940079 -59.034312 -12.018052 49.084341 0.000002 0.000000 0.371891 0.109E+04 max increase log_rel_run_E_err -6.6835227314208261 rel_E_err 1.8336464029769474D-12 k, q, energy_removed_layers before adjustment is 854 0.98377651480331318 7.9982882294563940E+049 k, q, energy_removed_layers after adjustment is 865 0.98008319719418779 8.1528780930337751E+049 Layers above q= 0.98008319719418779 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10786.414062500000 max vel inside fraction of cutoff 2406.0437212255674 max c/cs inside fraction of cutoff 3.2892497646543593 average v/vesc outside cutoff 1.3359263611636589 Kinetic plus potential energy outside cutoff 8.1528780930337751E+049 mass inside cutoff 865 50.700550337953715 relax counter 0 log max v [km/s]= 5.5760632852244099 check gamma integral 5.6224430608898625E-002 Warning: maximum velocity exceeds speed of light 1 0.3778317590E+11 0.1260311088E+01 Warning: maximum velocity exceeds speed of light 1 0.3787834878E+11 0.1263485714E+01 Warning: maximum velocity exceeds speed of light 1 0.3798902669E+11 0.1267177532E+01 Warning: maximum velocity exceeds speed of light 1 0.3811702014E+11 0.1271446933E+01 Warning: maximum velocity exceeds speed of light 1 0.3823322676E+11 0.1275323169E+01 Warning: maximum velocity exceeds speed of light 1 0.3836720060E+11 0.1279792056E+01 Warning: maximum velocity exceeds speed of light 1 0.3852060414E+11 0.1284909047E+01 Warning: maximum velocity exceeds speed of light 1 0.3869495384E+11 0.1290724727E+01 Warning: maximum velocity exceeds speed of light 1 0.3888722591E+11 0.1297138233E+01 Warning: maximum velocity exceeds speed of light 1 0.3904901102E+11 0.1302534803E+01 2990 8.535190 1.899E+04 -18.984279 1.912797 51.730864 0.000000 0.000000 0.000000 0.217143 -3.902527 3046 21 -6.2118E+00 8.535190 2.403443 -30.391929 3.683143 -99.000000 51.730864 0.000000 0.059838 0.782857 0.668124 5 2.8747E+05 3.355946 6.875272 1.912797 -61.234177 -12.326527 49.084341 0.000002 0.000000 0.371891 0.128E+04 min_dr_div_cs log_rel_run_E_err -6.6834858726177195 rel_E_err 1.6482032227647896D-12 k, q, energy_removed_layers before adjustment is 861 0.98165150189813810 8.6597177931914531E+049 k, q, energy_removed_layers after adjustment is 870 0.97891973813667688 8.7323304288026037E+049 Layers above q= 0.97891973813667688 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -10923.199218750000 max vel inside fraction of cutoff 2067.6023611297992 max c/cs inside fraction of cutoff 3.1866952157558650 average v/vesc outside cutoff 1.4485681938174366 Kinetic plus potential energy outside cutoff 8.7323304288026037E+049 mass inside cutoff 870 50.640363595970641 relax counter 0 log max v [km/s]= 5.5916100391795478 check gamma integral 5.6612973661311607E-002 write /mnt/home/pmocz/ceph/mesa-git-tests/tmp.EXYC17c8ij/data/eosDT_data/cache/mesa-FreeEOS_100z00x_CO.bin Warning: maximum velocity exceeds speed of light 1 0.3923148048E+11 0.1308621329E+01 Warning: maximum velocity exceeds speed of light 1 0.3942796356E+11 0.1315175299E+01 Warning: maximum velocity exceeds speed of light 1 0.3957689242E+11 0.1320143031E+01 Warning: maximum velocity exceeds speed of light 1 0.3969107178E+11 0.1323951645E+01 Warning: maximum velocity exceeds speed of light 1 0.3977939938E+11 0.1326897936E+01 Warning: maximum velocity exceeds speed of light 1 0.3984819456E+11 0.1329192696E+01 Warning: maximum velocity exceeds speed of light 1 0.3990397712E+11 0.1331053402E+01 Warning: maximum velocity exceeds speed of light 1 0.3995194843E+11 0.1332653553E+01 Warning: maximum velocity exceeds speed of light 1 0.3999477584E+11 0.1334082122E+01 Warning: maximum velocity exceeds speed of light 1 0.4003392779E+11 0.1335388090E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3000 8.563138 1.576E+04 -18.750190 1.978244 51.730864 0.000000 0.000000 0.000000 0.217143 -3.829316 3109 21 -6.6706E+00 8.563138 2.525716 -31.781559 3.897180 -99.000000 51.730864 0.000000 0.059838 0.782857 0.664347 5 2.8747E+05 3.432403 6.796380 1.978244 -56.023065 -12.571136 49.066765 0.000002 0.000000 0.371891 0.144E+04 lgRho_cntr log_rel_run_E_err -6.6834500627954396 rel_E_err 1.7035930886121728D-12 save LOGS/profile16.data for model 3000 save photos/3000 for model 3000 k, q, energy_removed_layers before adjustment is 869 0.98068864118827093 8.9738808890371038E+049 k, q, energy_removed_layers after adjustment is 876 0.97855366919699671 9.0191260015992228E+049 Layers above q= 0.97855366919699671 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11067.726562500000 max vel inside fraction of cutoff 1833.4785446210194 max c/cs inside fraction of cutoff 3.2209842244233569 average v/vesc outside cutoff 1.5545140655568199 Kinetic plus potential energy outside cutoff 9.0191260015992228E+049 mass inside cutoff 876 50.621426533528847 relax counter 0 log max v [km/s]= 5.6024282015126046 check gamma integral 5.5846678575411972E-002 Warning: maximum velocity exceeds speed of light 1 0.4007026788E+11 0.1336600265E+01 Warning: maximum velocity exceeds speed of light 1 0.4010434106E+11 0.1337736824E+01 Warning: maximum velocity exceeds speed of light 1 0.4013651286E+11 0.1338809960E+01 Warning: maximum velocity exceeds speed of light 1 0.4016704395E+11 0.1339828367E+01 Warning: maximum velocity exceeds speed of light 1 0.4019612908E+11 0.1340798543E+01 Warning: maximum velocity exceeds speed of light 1 0.4022392154E+11 0.1341725599E+01 Warning: maximum velocity exceeds speed of light 1 0.4025054725E+11 0.1342613738E+01 Warning: maximum velocity exceeds speed of light 1 0.4027611116E+11 0.1343466458E+01 Warning: maximum velocity exceeds speed of light 1 0.4030070111E+11 0.1344286690E+01 Warning: maximum velocity exceeds speed of light 1 0.4032439215E+11 0.1345076938E+01 3010 8.582947 1.487E+04 -18.586286 2.024503 51.730864 0.000000 0.000000 0.000000 0.217143 -3.777319 3146 21 -6.8336E+00 8.582947 2.564047 -31.127637 4.049724 -99.000000 51.730864 0.000000 0.059838 0.782857 0.661757 5 2.8747E+05 3.486743 6.772099 2.024503 -52.522108 -12.647820 49.066765 0.000002 0.000000 0.371891 0.149E+04 lgRho_cntr log_rel_run_E_err -6.6834127084524919 rel_E_err 1.7368649642825304D-12 k, q, energy_removed_layers before adjustment is 870 0.98039311283592590 9.0525556371725118E+049 k, q, energy_removed_layers after adjustment is 876 0.97855366919699671 9.0893874188415346E+049 Layers above q= 0.97855366919699671 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11121.306640625000 max vel inside fraction of cutoff 1761.4024431555276 max c/cs inside fraction of cutoff 3.2248923411606012 average v/vesc outside cutoff 1.5937327115881057 Kinetic plus potential energy outside cutoff 9.0893874188415346E+049 mass inside cutoff 876 50.621426533528847 relax counter 0 log max v [km/s]= 5.6055678296007390 check gamma integral 5.5291652128966279E-002 Warning: maximum velocity exceeds speed of light 1 0.4034724984E+11 0.1345839389E+01 Warning: maximum velocity exceeds speed of light 1 0.4036933250E+11 0.1346575987E+01 Warning: maximum velocity exceeds speed of light 1 0.4039069230E+11 0.1347288473E+01 Warning: maximum velocity exceeds speed of light 1 0.4041137563E+11 0.1347978395E+01 Warning: maximum velocity exceeds speed of light 1 0.4043142388E+11 0.1348647132E+01 Warning: maximum velocity exceeds speed of light 1 0.4045087437E+11 0.1349295931E+01 Warning: maximum velocity exceeds speed of light 1 0.4046976111E+11 0.1349925925E+01 Warning: maximum velocity exceeds speed of light 1 0.4048811517E+11 0.1350538150E+01 Warning: maximum velocity exceeds speed of light 1 0.4050596494E+11 0.1351133554E+01 Warning: maximum velocity exceeds speed of light 1 0.4052333644E+11 0.1351713005E+01 3020 8.602097 1.427E+04 -18.429624 2.069071 51.730864 0.000000 0.000000 0.000000 0.217143 -3.727065 3171 21 -6.9261E+00 8.602097 2.591405 -30.509705 4.197181 -99.000000 51.730864 0.000000 0.059838 0.782857 0.659303 5 2.8747E+05 3.539353 6.754656 2.069071 -49.282443 -12.702549 49.066765 0.000002 0.000000 0.371891 0.153E+04 lgRho_cntr log_rel_run_E_err -6.6833736162122754 rel_E_err 1.8230664527132815D-12 k, q, energy_removed_layers before adjustment is 873 0.98008319719418835 9.1061175714774716E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352326 9.1341033385959670E+049 Layers above q= 0.97823124698352326 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11162.306640625000 max vel inside fraction of cutoff 1694.5758649884594 max c/cs inside fraction of cutoff 3.1767046043376146 average v/vesc outside cutoff 1.6123797558366557 Kinetic plus potential energy outside cutoff 9.1341033385959670E+049 mass inside cutoff 879 50.604747353933604 relax counter 0 log max v [km/s]= 5.6077051952390278 check gamma integral 5.4748597787871868E-002 Warning: maximum velocity exceeds speed of light 1 0.4054025355E+11 0.1352277300E+01 Warning: maximum velocity exceeds speed of light 1 0.4055673831E+11 0.1352827172E+01 Warning: maximum velocity exceeds speed of light 1 0.4057281112E+11 0.1353363303E+01 Warning: maximum velocity exceeds speed of light 1 0.4058849082E+11 0.1353886322E+01 Warning: maximum velocity exceeds speed of light 1 0.4060379500E+11 0.1354396814E+01 Warning: maximum velocity exceeds speed of light 1 0.4061874003E+11 0.1354895327E+01 Warning: maximum velocity exceeds speed of light 1 0.4063334117E+11 0.1355382368E+01 Warning: maximum velocity exceeds speed of light 1 0.4064761272E+11 0.1355858416E+01 Warning: maximum velocity exceeds speed of light 1 0.4066156804E+11 0.1356323915E+01 Warning: maximum velocity exceeds speed of light 1 0.4067521964E+11 0.1356779284E+01 3030 8.620989 1.380E+04 -18.276796 2.118379 51.730864 0.000000 0.000000 0.000000 0.217143 -3.677514 3183 21 -6.9953E+00 8.620989 2.613070 -29.920654 4.342649 -99.000000 51.730864 0.000000 0.059838 0.782857 0.656929 5 2.8747E+05 3.591326 6.740815 2.118379 -46.219830 -12.745890 49.066765 0.000002 0.000000 0.371891 0.156E+04 lgRho_cntr log_rel_run_E_err -6.6833329498944538 rel_E_err 1.9869616553743956D-12 k, q, energy_removed_layers before adjustment is 874 0.98008319719418813 9.1373154514018137E+049 k, q, energy_removed_layers after adjustment is 880 0.97823124698352304 9.1672435235853598E+049 Layers above q= 0.97823124698352304 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11196.509765625000 max vel inside fraction of cutoff 1654.7315857675558 max c/cs inside fraction of cutoff 3.1721631476004104 average v/vesc outside cutoff 1.6354860765306594 Kinetic plus potential energy outside cutoff 9.1672435235853598E+049 mass inside cutoff 880 50.604747353933590 relax counter 0 log max v [km/s]= 5.6093299067197497 check gamma integral 5.4208529988672434E-002 Warning: maximum velocity exceeds speed of light 1 0.4068857923E+11 0.1357224911E+01 Warning: maximum velocity exceeds speed of light 1 0.4070165782E+11 0.1357661167E+01 Warning: maximum velocity exceeds speed of light 1 0.4071446579E+11 0.1358088394E+01 Warning: maximum velocity exceeds speed of light 1 0.4072701291E+11 0.1358506921E+01 Warning: maximum velocity exceeds speed of light 1 0.4073930924E+11 0.1358917082E+01 Warning: maximum velocity exceeds speed of light 1 0.4075136303E+11 0.1359319154E+01 Warning: maximum velocity exceeds speed of light 1 0.4076318258E+11 0.1359713411E+01 Warning: maximum velocity exceeds speed of light 1 0.4077477581E+11 0.1360100120E+01 Warning: maximum velocity exceeds speed of light 1 0.4078615025E+11 0.1360479531E+01 Warning: maximum velocity exceeds speed of light 1 0.4079731306E+11 0.1360851882E+01 3040 8.639726 1.343E+04 -18.126893 2.168203 51.730864 0.000000 0.000000 0.000000 0.217143 -3.628400 3192 21 -7.0520E+00 8.639726 2.631075 -29.357931 4.487050 -99.000000 51.730864 0.000000 0.059838 0.782857 0.654618 5 2.8747E+05 3.642947 6.729342 2.168203 -43.307275 -12.781911 49.066765 0.000002 0.000000 0.371891 0.158E+04 lgRho_cntr log_rel_run_E_err -6.6832903910834505 rel_E_err 2.0782668379120955D-12 k, q, energy_removed_layers before adjustment is 873 0.98008319719418802 9.1614293909857752E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.1927293104373684E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11226.164062500000 max vel inside fraction of cutoff 1625.8912046730686 max c/cs inside fraction of cutoff 3.1783207866613039 average v/vesc outside cutoff 1.6550413730048541 Kinetic plus potential energy outside cutoff 9.1927293104373684E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6106315610546567 check gamma integral 5.3669383847143856E-002 Warning: maximum velocity exceeds speed of light 1 0.4080827098E+11 0.1361217399E+01 Warning: maximum velocity exceeds speed of light 1 0.4081903040E+11 0.1361576294E+01 Warning: maximum velocity exceeds speed of light 1 0.4082959739E+11 0.1361928771E+01 Warning: maximum velocity exceeds speed of light 1 0.4083997771E+11 0.1362275021E+01 Warning: maximum velocity exceeds speed of light 1 0.4085017690E+11 0.1362615230E+01 Warning: maximum velocity exceeds speed of light 1 0.4086020026E+11 0.1362949573E+01 Warning: maximum velocity exceeds speed of light 1 0.4087005290E+11 0.1363278222E+01 Warning: maximum velocity exceeds speed of light 1 0.4087973976E+11 0.1363601340E+01 Warning: maximum velocity exceeds speed of light 1 0.4088926558E+11 0.1363919088E+01 Warning: maximum velocity exceeds speed of light 1 0.4089863491E+11 0.1364231615E+01 3050 8.658356 1.312E+04 -17.979486 2.217756 51.730864 0.000000 0.000000 0.000000 0.217143 -3.579608 3197 21 -7.1006E+00 8.658356 2.646486 -28.820093 4.631071 -99.000000 51.730864 0.000000 0.059838 0.782857 0.652364 5 2.8747E+05 3.694343 6.719536 2.217756 -40.529541 -12.812740 49.066765 0.000002 0.000000 0.371891 0.161E+04 lgRho_cntr log_rel_run_E_err -6.6832461392027547 rel_E_err 2.2139952604698505D-12 save photos/x050 for model 3050 k, q, energy_removed_layers before adjustment is 876 0.97976414455651406 9.1886561596422133E+049 k, q, energy_removed_layers after adjustment is 881 0.97823124698352293 9.2131295566315947E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11252.468750000000 max vel inside fraction of cutoff 1594.7679410597184 max c/cs inside fraction of cutoff 3.1710922133848536 average v/vesc outside cutoff 1.6720400390634147 Kinetic plus potential energy outside cutoff 9.2131295566315947E+049 mass inside cutoff 881 50.604747353933590 relax counter 0 log max v [km/s]= 5.6117088126009671 check gamma integral 5.3130385188585504E-002 Warning: maximum velocity exceeds speed of light 1 0.4090785207E+11 0.1364539066E+01 Warning: maximum velocity exceeds speed of light 1 0.4091692120E+11 0.1364841580E+01 Warning: maximum velocity exceeds speed of light 1 0.4092584620E+11 0.1365139286E+01 Warning: maximum velocity exceeds speed of light 1 0.4093463084E+11 0.1365432310E+01 Warning: maximum velocity exceeds speed of light 1 0.4094327871E+11 0.1365720772E+01 Warning: maximum velocity exceeds speed of light 1 0.4095179328E+11 0.1366004787E+01 Warning: maximum velocity exceeds speed of light 1 0.4096017797E+11 0.1366284470E+01 Warning: maximum velocity exceeds speed of light 1 0.4096843600E+11 0.1366559929E+01 Warning: maximum velocity exceeds speed of light 1 0.4097657052E+11 0.1366831267E+01 Warning: maximum velocity exceeds speed of light 1 0.4098458461E+11 0.1367098588E+01 3060 8.676903 1.286E+04 -17.834349 2.267103 51.730864 0.000000 0.000000 0.000000 0.217143 -3.531082 3204 21 -7.1437E+00 8.676903 2.659942 -28.306285 4.775583 -99.000000 51.730864 0.000000 0.059838 0.782857 0.650162 4 2.8747E+05 3.745579 6.711003 2.267103 -37.876176 -12.839659 49.066765 0.000002 0.000000 0.371891 0.163E+04 lgRho_cntr log_rel_run_E_err -6.6831997645254440 rel_E_err 2.2070013776854416D-12 k, q, energy_removed_layers before adjustment is 876 0.97976414455651406 9.2051074362568685E+049 k, q, energy_removed_layers after adjustment is 882 0.97823124698352293 9.2301383970929814E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11276.160156250000 max vel inside fraction of cutoff 1567.1026205449919 max c/cs inside fraction of cutoff 3.1633899128289933 average v/vesc outside cutoff 1.6871092464922306 Kinetic plus potential energy outside cutoff 9.2301383970929814E+049 mass inside cutoff 882 50.604747353933590 relax counter 0 log max v [km/s]= 5.6126205377035721 check gamma integral 5.2591263056309748E-002 Warning: maximum velocity exceeds speed of light 1 0.4099248122E+11 0.1367361991E+01 Warning: maximum velocity exceeds speed of light 1 0.4100026325E+11 0.1367621571E+01 Warning: maximum velocity exceeds speed of light 1 0.4100793344E+11 0.1367877421E+01 Warning: maximum velocity exceeds speed of light 1 0.4101549446E+11 0.1368129630E+01 Warning: maximum velocity exceeds speed of light 1 0.4102294890E+11 0.1368378283E+01 Warning: maximum velocity exceeds speed of light 1 0.4103029923E+11 0.1368623464E+01 Warning: maximum velocity exceeds speed of light 1 0.4103754783E+11 0.1368865251E+01 Warning: maximum velocity exceeds speed of light 1 0.4104469696E+11 0.1369103720E+01 Warning: maximum velocity exceeds speed of light 1 0.4105174884E+11 0.1369338946E+01 Warning: maximum velocity exceeds speed of light 1 0.4105870560E+11 0.1369570998E+01 3070 8.695381 1.263E+04 -17.691337 2.316276 51.730864 0.000000 0.000000 0.000000 0.217143 -3.482793 3221 21 -7.1825E+00 8.695381 2.671866 -27.815593 4.922113 -99.000000 51.730864 0.000000 0.059838 0.782857 0.648010 4 2.8747E+05 3.796693 6.703476 2.316276 -35.339086 -12.863513 49.066765 0.000002 0.000000 0.371891 0.164E+04 lgRho_cntr log_rel_run_E_err -6.6831509113024588 rel_E_err 2.4306324646355884D-12 k, q, energy_removed_layers before adjustment is 875 0.97976414455651406 9.2191997045943844E+049 k, q, energy_removed_layers after adjustment is 882 0.97823124698352293 9.2445390487150747E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11297.734375000000 max vel inside fraction of cutoff 1580.5336258295297 max c/cs inside fraction of cutoff 3.1558264571332133 average v/vesc outside cutoff 1.7006341722797389 Kinetic plus potential energy outside cutoff 9.2445390487150747E+049 mass inside cutoff 882 50.604747353933590 relax counter 0 log max v [km/s]= 5.6134052538715062 check gamma integral 5.2051890199316136E-002 Warning: maximum velocity exceeds speed of light 1 0.4106556935E+11 0.1369799948E+01 Warning: maximum velocity exceeds speed of light 1 0.4107234213E+11 0.1370025864E+01 Warning: maximum velocity exceeds speed of light 1 0.4107902593E+11 0.1370248812E+01 Warning: maximum velocity exceeds speed of light 1 0.4108562269E+11 0.1370468856E+01 Warning: maximum velocity exceeds speed of light 1 0.4109213425E+11 0.1370686058E+01 Warning: maximum velocity exceeds speed of light 1 0.4109856242E+11 0.1370900479E+01 Warning: maximum velocity exceeds speed of light 1 0.4110490889E+11 0.1371112174E+01 Warning: maximum velocity exceeds speed of light 1 0.4111117532E+11 0.1371321200E+01 Warning: maximum velocity exceeds speed of light 1 0.4111736331E+11 0.1371527609E+01 Warning: maximum velocity exceeds speed of light 1 0.4112347440E+11 0.1371731453E+01 3080 8.713798 1.242E+04 -17.550356 2.365296 51.730864 0.000000 0.000000 0.000000 0.217143 -3.434728 3245 21 -7.2177E+00 8.713798 2.682558 -27.346529 5.073389 -99.000000 51.730864 0.000000 0.059838 0.782857 0.645906 4 2.8747E+05 3.847707 6.696735 2.365296 -32.911577 -12.884901 49.066765 0.000002 0.000000 0.371891 0.166E+04 lgRho_cntr log_rel_run_E_err -6.6830995252768357 rel_E_err 2.5584225240387464D-12 k, q, energy_removed_layers before adjustment is 874 0.97976414455651406 9.2314456904137087E+049 k, q, energy_removed_layers after adjustment is 881 0.97823124698352293 9.2570766159168882E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11317.554687500000 max vel inside fraction of cutoff 1747.0687759053963 max c/cs inside fraction of cutoff 3.1484097351364015 average v/vesc outside cutoff 1.7129119354890896 Kinetic plus potential energy outside cutoff 9.2570766159168882E+049 mass inside cutoff 881 50.604747353933590 relax counter 0 log max v [km/s]= 5.6140897997896495 check gamma integral 5.1512125484778591E-002 Warning: maximum velocity exceeds speed of light 1 0.4112951013E+11 0.1371932783E+01 Warning: maximum velocity exceeds speed of light 1 0.4113547198E+11 0.1372131649E+01 Warning: maximum velocity exceeds speed of light 1 0.4114136145E+11 0.1372328101E+01 Warning: maximum velocity exceeds speed of light 1 0.4114718000E+11 0.1372522187E+01 Warning: maximum velocity exceeds speed of light 1 0.4115292909E+11 0.1372713956E+01 Warning: maximum velocity exceeds speed of light 1 0.4115861015E+11 0.1372903455E+01 Warning: maximum velocity exceeds speed of light 1 0.4116422457E+11 0.1373090732E+01 Warning: maximum velocity exceeds speed of light 1 0.4116977374E+11 0.1373275833E+01 Warning: maximum velocity exceeds speed of light 1 0.4117525896E+11 0.1373458800E+01 Warning: maximum velocity exceeds speed of light 1 0.4118068152E+11 0.1373639677E+01 3090 8.732159 1.224E+04 -17.411365 2.414172 51.730864 0.000000 0.000000 0.000000 0.217143 -3.386884 3264 21 -7.2500E+00 8.732159 2.692237 -26.897287 5.233983 -99.000000 51.730864 0.000000 0.059838 0.782857 0.643848 4 2.8747E+05 3.898631 6.690621 2.414172 -30.587940 -12.904266 49.066765 0.000002 0.000000 0.371891 0.167E+04 lgRho_cntr log_rel_run_E_err -6.6830458202383838 rel_E_err 2.6508624906573925D-12 k, q, energy_removed_layers before adjustment is 874 0.97952322925541901 9.2495590506191606E+049 k, q, energy_removed_layers after adjustment is 880 0.97823124698352315 9.2680285650481298E+049 Layers above q= 0.97823124698352315 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11335.896484375000 max vel inside fraction of cutoff 1921.7970501417169 max c/cs inside fraction of cutoff 3.1411267025181475 average v/vesc outside cutoff 1.7241449235481943 Kinetic plus potential energy outside cutoff 9.2680285650481298E+049 mass inside cutoff 880 50.604747353933597 relax counter 0 log max v [km/s]= 5.6146935296755007 check gamma integral 5.0971673096989620E-002 Warning: maximum velocity exceeds speed of light 1 0.4118604263E+11 0.1373818504E+01 Warning: maximum velocity exceeds speed of light 1 0.4119134351E+11 0.1373995323E+01 Warning: maximum velocity exceeds speed of light 1 0.4119658532E+11 0.1374170171E+01 Warning: maximum velocity exceeds speed of light 1 0.4120176921E+11 0.1374343087E+01 Warning: maximum velocity exceeds speed of light 1 0.4120689631E+11 0.1374514108E+01 Warning: maximum velocity exceeds speed of light 1 0.4121196773E+11 0.1374683273E+01 Warning: maximum velocity exceeds speed of light 1 0.4121698456E+11 0.1374850616E+01 Warning: maximum velocity exceeds speed of light 1 0.4122194787E+11 0.1375016174E+01 Warning: maximum velocity exceeds speed of light 1 0.4122685871E+11 0.1375179982E+01 Warning: maximum velocity exceeds speed of light 1 0.4123171809E+11 0.1375342074E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3100 8.750463 1.208E+04 -17.274300 2.462901 51.730864 0.000000 0.000000 0.000000 0.217143 -3.339267 3291 21 -7.2791E+00 8.750463 2.701081 -26.466465 5.410675 -99.000000 51.730864 0.000000 0.059838 0.782857 0.641836 4 2.8747E+05 3.949464 6.685042 2.462901 -28.363284 -12.921958 49.066765 0.000002 0.000000 0.371891 0.169E+04 lgRho_cntr log_rel_run_E_err -6.6829894570287998 rel_E_err 2.6771400298189019D-12 save LOGS/profile17.data for model 3100 save photos/x100 for model 3100 k, q, energy_removed_layers before adjustment is 874 0.97952322925541901 9.2590079997476420E+049 k, q, energy_removed_layers after adjustment is 880 0.97823124698352315 9.2777144435418137E+049 Layers above q= 0.97823124698352315 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11352.994140625000 max vel inside fraction of cutoff 2100.7350189833860 max c/cs inside fraction of cutoff 3.1339794675472015 average v/vesc outside cutoff 1.7345069802186892 Kinetic plus potential energy outside cutoff 9.2777144435418137E+049 mass inside cutoff 880 50.604747353933597 relax counter 0 log max v [km/s]= 5.6152314318790637 check gamma integral 5.0429675623155840E-002 Warning: maximum velocity exceeds speed of light 1 0.4123652700E+11 0.1375502482E+01 Warning: maximum velocity exceeds speed of light 1 0.4124128636E+11 0.1375661237E+01 Warning: maximum velocity exceeds speed of light 1 0.4124599707E+11 0.1375818369E+01 Warning: maximum velocity exceeds speed of light 1 0.4125066000E+11 0.1375973908E+01 Warning: maximum velocity exceeds speed of light 1 0.4125527597E+11 0.1376127880E+01 Warning: maximum velocity exceeds speed of light 1 0.4125984575E+11 0.1376280312E+01 Warning: maximum velocity exceeds speed of light 1 0.4126437012E+11 0.1376431228E+01 Warning: maximum velocity exceeds speed of light 1 0.4126884979E+11 0.1376580654E+01 Warning: maximum velocity exceeds speed of light 1 0.4127328546E+11 0.1376728612E+01 Warning: maximum velocity exceeds speed of light 1 0.4127767783E+11 0.1376875126E+01 3110 8.768715 1.193E+04 -17.138992 2.511498 51.730864 0.000000 0.000000 0.000000 0.217143 -3.291873 3297 21 -7.3054E+00 8.768715 2.709231 -26.052998 5.611588 -99.000000 51.730864 0.000000 0.059838 0.782857 0.639868 4 2.8747E+05 4.000221 6.679918 2.511498 -26.232135 -12.938262 49.066765 0.000002 0.000000 0.371891 0.170E+04 lgRho_cntr log_rel_run_E_err -6.6829303945328133 rel_E_err 2.9194857213054346D-12 k, q, energy_removed_layers before adjustment is 873 0.97952322925541879 9.2674300228505263E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.2863775149242488E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11369.041015625000 max vel inside fraction of cutoff 2290.2374065003028 max c/cs inside fraction of cutoff 3.1269686699636003 average v/vesc outside cutoff 1.7441401320086742 Kinetic plus potential energy outside cutoff 9.2863775149242488E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6157152570305273 check gamma integral 4.9884868442220252E-002 Warning: maximum velocity exceeds speed of light 1 0.4128202754E+11 0.1377020216E+01 Warning: maximum velocity exceeds speed of light 1 0.4128633523E+11 0.1377163906E+01 Warning: maximum velocity exceeds speed of light 1 0.4129060152E+11 0.1377306214E+01 Warning: maximum velocity exceeds speed of light 1 0.4129482698E+11 0.1377447160E+01 Warning: maximum velocity exceeds speed of light 1 0.4129901215E+11 0.1377586762E+01 Warning: maximum velocity exceeds speed of light 1 0.4130315751E+11 0.1377725036E+01 Warning: maximum velocity exceeds speed of light 1 0.4130726351E+11 0.1377861998E+01 Warning: maximum velocity exceeds speed of light 1 0.4131133055E+11 0.1377997660E+01 Warning: maximum velocity exceeds speed of light 1 0.4131535900E+11 0.1378132034E+01 Warning: maximum velocity exceeds speed of light 1 0.4131934923E+11 0.1378265134E+01 3120 8.786933 1.180E+04 -17.005229 2.560007 51.730864 0.000000 0.000000 0.000000 0.217143 -3.244663 3305 21 -7.3305E+00 8.786933 2.716786 -25.656470 5.843260 -99.000000 51.730864 0.000000 0.059838 0.782857 0.637943 4 2.8747E+05 4.050948 6.675190 2.560007 -24.188190 -12.953375 49.066765 0.000002 0.000000 0.371891 0.171E+04 lgRho_cntr log_rel_run_E_err -6.6828678138337780 rel_E_err 3.0899974752983280D-12 k, q, energy_removed_layers before adjustment is 873 0.97952322925541879 9.2750078954416768E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.2941923650807994E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11384.171875000000 max vel inside fraction of cutoff 2495.2444523304052 max c/cs inside fraction of cutoff 3.1201011029648256 average v/vesc outside cutoff 1.7531440822627713 Kinetic plus potential energy outside cutoff 9.2941923650807994E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6161534729044549 check gamma integral 4.9336868438500832E-002 Warning: maximum velocity exceeds speed of light 1 0.4132330159E+11 0.1378396971E+01 Warning: maximum velocity exceeds speed of light 1 0.4132721645E+11 0.1378527556E+01 Warning: maximum velocity exceeds speed of light 1 0.4133109417E+11 0.1378656903E+01 Warning: maximum velocity exceeds speed of light 1 0.4133493516E+11 0.1378785025E+01 Warning: maximum velocity exceeds speed of light 1 0.4133873984E+11 0.1378911935E+01 Warning: maximum velocity exceeds speed of light 1 0.4134250865E+11 0.1379037649E+01 Warning: maximum velocity exceeds speed of light 1 0.4134624206E+11 0.1379162182E+01 Warning: maximum velocity exceeds speed of light 1 0.4134994054E+11 0.1379285550E+01 Warning: maximum velocity exceeds speed of light 1 0.4135360459E+11 0.1379407770E+01 Warning: maximum velocity exceeds speed of light 1 0.4135723471E+11 0.1379528858E+01 3130 8.805128 1.167E+04 -16.873121 2.608459 51.730864 0.000000 0.000000 0.000000 0.217143 -3.197613 3315 21 -7.3558E+00 8.805128 2.723803 -25.277742 6.106634 -99.000000 51.730864 0.000000 0.059838 0.782857 0.636058 4 2.8747E+05 4.101679 6.670814 2.608459 -22.226734 -12.967413 49.066765 0.000002 0.000000 0.371891 0.172E+04 lgRho_cntr log_rel_run_E_err -6.6828014107414235 rel_E_err 3.1966149705300833D-12 k, q, energy_removed_layers before adjustment is 873 0.97952322925541879 9.2818593359429938E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.3012734930160343E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11398.449218750000 max vel inside fraction of cutoff 2720.3813568278874 max c/cs inside fraction of cutoff 3.1134009088639298 average v/vesc outside cutoff 1.7615726600150763 Kinetic plus potential energy outside cutoff 9.3012734930160343E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6165514926383242 check gamma integral 4.8787384256522626E-002 Warning: maximum velocity exceeds speed of light 1 0.4136083141E+11 0.1379648831E+01 Warning: maximum velocity exceeds speed of light 1 0.4136439522E+11 0.1379767707E+01 Warning: maximum velocity exceeds speed of light 1 0.4136792667E+11 0.1379885503E+01 Warning: maximum velocity exceeds speed of light 1 0.4137142633E+11 0.1380002239E+01 Warning: maximum velocity exceeds speed of light 1 0.4137489475E+11 0.1380117933E+01 Warning: maximum velocity exceeds speed of light 1 0.4137833254E+11 0.1380232605E+01 Warning: maximum velocity exceeds speed of light 1 0.4138174028E+11 0.1380346275E+01 Warning: maximum velocity exceeds speed of light 1 0.4138511858E+11 0.1380458963E+01 Warning: maximum velocity exceeds speed of light 1 0.4138846805E+11 0.1380570690E+01 Warning: maximum velocity exceeds speed of light 1 0.4139178932E+11 0.1380681475E+01 3140 8.823276 1.156E+04 -16.742942 2.656794 51.730864 0.000000 0.000000 0.000000 0.217143 -3.150787 3321 21 -7.3794E+00 8.823276 2.730337 -24.917419 6.395889 -99.000000 51.730864 0.000000 0.059838 0.782857 0.634218 5 2.8747E+05 4.152349 6.666750 2.656794 -20.346914 -12.980484 49.066765 0.000002 0.000000 0.371891 0.173E+04 lgRho_cntr log_rel_run_E_err -6.6827323667035685 rel_E_err 3.5313997830289595D-12 k, q, energy_removed_layers before adjustment is 872 0.97952322925541879 9.2880834542785670E+049 k, q, energy_removed_layers after adjustment is 878 0.97823124698352293 9.3077191366416667E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11411.941406250000 max vel inside fraction of cutoff 2953.2073939867128 max c/cs inside fraction of cutoff 3.1068794262812158 average v/vesc outside cutoff 1.7694783433700505 Kinetic plus potential energy outside cutoff 9.3077191366416667E+049 mass inside cutoff 878 50.604747353933590 relax counter 0 log max v [km/s]= 5.6169142008164581 check gamma integral 4.8237532903121272E-002 Warning: maximum velocity exceeds speed of light 1 0.4139508301E+11 0.1380791341E+01 Warning: maximum velocity exceeds speed of light 1 0.4139834976E+11 0.1380900308E+01 Warning: maximum velocity exceeds speed of light 1 0.4140159015E+11 0.1381008396E+01 Warning: maximum velocity exceeds speed of light 1 0.4140480484E+11 0.1381115626E+01 Warning: maximum velocity exceeds speed of light 1 0.4140799439E+11 0.1381222018E+01 Warning: maximum velocity exceeds speed of light 1 0.4141115936E+11 0.1381327590E+01 Warning: maximum velocity exceeds speed of light 1 0.4141430030E+11 0.1381432361E+01 Warning: maximum velocity exceeds speed of light 1 0.4141741772E+11 0.1381536347E+01 Warning: maximum velocity exceeds speed of light 1 0.4142051208E+11 0.1381639563E+01 Warning: maximum velocity exceeds speed of light 1 0.4142358385E+11 0.1381742027E+01 3150 8.841356 1.145E+04 -16.614618 2.704971 51.730864 0.000000 0.000000 0.000000 0.217143 -3.104246 3333 21 -7.3988E+00 8.841356 2.736471 -24.573717 6.701891 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632423 5 2.8747E+05 4.202896 6.662944 2.704971 -18.546852 -12.992756 49.066765 0.000002 0.000000 0.371891 0.174E+04 lgRho_cntr log_rel_run_E_err -6.6826601471346541 rel_E_err 3.5166557097138663D-12 save photos/x150 for model 3150 k, q, energy_removed_layers before adjustment is 872 0.97952322925541879 9.2937949110544165E+049 k, q, energy_removed_layers after adjustment is 878 0.97823124698352293 9.3136448241051808E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11424.787109375000 max vel inside fraction of cutoff 3224.9665750191925 max c/cs inside fraction of cutoff 3.1951143608023291 average v/vesc outside cutoff 1.7769513430805977 Kinetic plus potential energy outside cutoff 9.3136448241051808E+049 mass inside cutoff 878 50.604747353933590 relax counter 0 log max v [km/s]= 5.6172476701259759 check gamma integral 4.7684872371824602E-002 Warning: maximum velocity exceeds speed of light 1 0.4142663347E+11 0.1381843751E+01 Warning: maximum velocity exceeds speed of light 1 0.4142966131E+11 0.1381944749E+01 Warning: maximum velocity exceeds speed of light 1 0.4143266780E+11 0.1382045035E+01 Warning: maximum velocity exceeds speed of light 1 0.4143565331E+11 0.1382144621E+01 Warning: maximum velocity exceeds speed of light 1 0.4143861818E+11 0.1382243518E+01 Warning: maximum velocity exceeds speed of light 1 0.4144156279E+11 0.1382341740E+01 Warning: maximum velocity exceeds speed of light 1 0.4144448749E+11 0.1382439297E+01 Warning: maximum velocity exceeds speed of light 1 0.4144739265E+11 0.1382536203E+01 Warning: maximum velocity exceeds speed of light 1 0.4145027856E+11 0.1382632467E+01 Warning: maximum velocity exceeds speed of light 1 0.4145314555E+11 0.1382728099E+01 3160 8.859375 1.135E+04 -16.487931 2.756995 51.730864 0.000000 0.000000 0.000000 0.217143 -3.057966 3379 21 -7.4147E+00 8.859375 2.742289 -23.533081 7.015901 -99.000000 51.730864 0.000000 0.059838 0.782857 0.630675 5 2.8747E+05 4.253346 6.659336 2.756995 -16.821710 -13.004393 49.066765 0.000002 0.000000 0.371891 0.175E+04 lgRho_cntr log_rel_run_E_err -6.6825816163217695 rel_E_err 4.1565480844089042D-12 k, q, energy_removed_layers before adjustment is 872 0.97928009046427533 9.3036940913183092E+049 k, q, energy_removed_layers after adjustment is 877 0.97823124698352293 9.3191544393127642E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11437.125000000000 max vel inside fraction of cutoff 3517.3104263986365 max c/cs inside fraction of cutoff 3.4427392639908216 average v/vesc outside cutoff 1.7840841578079591 Kinetic plus potential energy outside cutoff 9.3191544393127642E+049 mass inside cutoff 877 50.604747353933590 relax counter 0 log max v [km/s]= 5.6175574912763242 check gamma integral 4.7125197153857018E-002 Warning: maximum velocity exceeds speed of light 1 0.4145599390E+11 0.1382823110E+01 Warning: maximum velocity exceeds speed of light 1 0.4145882395E+11 0.1382917510E+01 Warning: maximum velocity exceeds speed of light 1 0.4146163595E+11 0.1383011308E+01 Warning: maximum velocity exceeds speed of light 1 0.4146443018E+11 0.1383104514E+01 Warning: maximum velocity exceeds speed of light 1 0.4146720692E+11 0.1383197136E+01 Warning: maximum velocity exceeds speed of light 1 0.4146996644E+11 0.1383289183E+01 Warning: maximum velocity exceeds speed of light 1 0.4147270902E+11 0.1383380666E+01 Warning: maximum velocity exceeds speed of light 1 0.4147543495E+11 0.1383471593E+01 Warning: maximum velocity exceeds speed of light 1 0.4147814453E+11 0.1383561975E+01 Warning: maximum velocity exceeds speed of light 1 0.4148083808E+11 0.1383651822E+01 3170 8.877340 1.126E+04 -16.362902 2.809863 51.730864 0.000000 0.000000 0.000000 0.217143 -3.011920 3377 21 -7.4281E+00 8.877340 2.747845 -20.075869 7.330798 -99.000000 51.730864 0.000000 0.059838 0.782857 0.628974 5 2.8747E+05 4.303723 6.655893 2.809863 -15.167618 -13.015509 49.066765 0.000002 0.000000 0.371891 0.175E+04 lgRho_cntr log_rel_run_E_err -6.6824329070478514 rel_E_err 7.4771737662660736D-12 k, q, energy_removed_layers before adjustment is 872 0.97928009046427533 9.3085611433130536E+049 k, q, energy_removed_layers after adjustment is 877 0.97823124698352293 9.3242044085090479E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11449.062500000000 max vel inside fraction of cutoff 3829.1852237522094 max c/cs inside fraction of cutoff 3.7236127242078259 average v/vesc outside cutoff 1.7909115132530340 Kinetic plus potential energy outside cutoff 9.3242044085090479E+049 mass inside cutoff 877 50.604747353933590 relax counter 0 log max v [km/s]= 5.6178475223200159 check gamma integral 4.6554598800021177E-002 Warning: maximum velocity exceeds speed of light 1 0.4148350371E+11 0.1383740738E+01 Warning: maximum velocity exceeds speed of light 1 0.4148611824E+11 0.1383827949E+01 Warning: maximum velocity exceeds speed of light 1 0.4148867555E+11 0.1383913252E+01 Warning: maximum velocity exceeds speed of light 1 0.4149117263E+11 0.1383996546E+01 Warning: maximum velocity exceeds speed of light 1 0.4149360727E+11 0.1384077756E+01 Warning: maximum velocity exceeds speed of light 1 0.4149598660E+11 0.1384157122E+01 Warning: maximum velocity exceeds speed of light 1 0.4149830589E+11 0.1384234486E+01 Warning: maximum velocity exceeds speed of light 1 0.4150057065E+11 0.1384310030E+01 Warning: maximum velocity exceeds speed of light 1 0.4150278846E+11 0.1384384008E+01 Warning: maximum velocity exceeds speed of light 1 0.4150495921E+11 0.1384456417E+01 3180 8.893824 1.117E+04 -16.249398 2.858858 51.730864 0.000000 0.000000 0.000000 0.217143 -2.969729 3389 21 -7.5093E+00 8.893824 2.752776 -17.524061 7.617068 -99.000000 51.730864 0.000000 0.059838 0.782857 0.627456 5 2.8747E+05 4.350027 6.652825 2.858858 -13.705792 -13.025374 49.066765 0.000002 0.000000 0.371891 0.176E+04 min_dr_div_cs log_rel_run_E_err -6.6823059913157232 rel_E_err 5.8202639279500859D-12 k, q, energy_removed_layers before adjustment is 872 0.97928009046427533 9.3129030047639262E+049 k, q, energy_removed_layers after adjustment is 877 0.97823124698352293 9.3287100742263390E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11459.777343750000 max vel inside fraction of cutoff 4084.9273886231176 max c/cs inside fraction of cutoff 3.9874384619816179 average v/vesc outside cutoff 1.7970304223972249 Kinetic plus potential energy outside cutoff 9.3287100742263390E+049 mass inside cutoff 877 50.604747353933590 relax counter 0 log max v [km/s]= 5.6180999913823735 check gamma integral 4.6015019601152986E-002 Warning: maximum velocity exceeds speed of light 1 0.4150755586E+11 0.1384543031E+01 Warning: maximum velocity exceeds speed of light 1 0.4151065996E+11 0.1384646573E+01 Warning: maximum velocity exceeds speed of light 1 0.4151331909E+11 0.1384735272E+01 Warning: maximum velocity exceeds speed of light 1 0.4151577747E+11 0.1384817275E+01 Warning: maximum velocity exceeds speed of light 1 0.4151814395E+11 0.1384896212E+01 Warning: maximum velocity exceeds speed of light 1 0.4152045086E+11 0.1384973162E+01 Warning: maximum velocity exceeds speed of light 1 0.4152320957E+11 0.1385065183E+01 Warning: maximum velocity exceeds speed of light 1 0.4152650626E+11 0.1385175149E+01 Warning: maximum velocity exceeds speed of light 1 0.4152923284E+11 0.1385266098E+01 Warning: maximum velocity exceeds speed of light 1 0.4153152376E+11 0.1385342515E+01 3190 8.912719 1.108E+04 -16.120575 2.916982 51.730864 0.000000 0.000000 0.000000 0.217143 -2.921453 3413 21 -7.4715E+00 8.912719 2.758315 -15.434923 7.939460 -99.000000 51.730864 0.000000 0.059838 0.782857 0.625762 5 2.8747E+05 4.403191 6.649372 2.916982 -12.092993 -13.036454 49.066765 0.000002 0.000000 0.371891 0.177E+04 min_dr_div_cs log_rel_run_E_err -6.6143787946414125 rel_E_err 2.6657071509552015D-09 k, q, energy_removed_layers before adjustment is 874 0.97928009046427533 9.3174929174684480E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.3334844442531925E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11471.949218750000 max vel inside fraction of cutoff 4282.3643891543570 max c/cs inside fraction of cutoff 4.2293331370853364 average v/vesc outside cutoff 1.8039180204861343 Kinetic plus potential energy outside cutoff 9.3334844442531925E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6183778653451180 check gamma integral 4.5368346204841210E-002 Warning: maximum velocity exceeds speed of light 1 0.4153344099E+11 0.1385406467E+01 Warning: maximum velocity exceeds speed of light 1 0.4153513757E+11 0.1385463058E+01 Warning: maximum velocity exceeds speed of light 1 0.4153670605E+11 0.1385515377E+01 Warning: maximum velocity exceeds speed of light 1 0.4153819287E+11 0.1385564972E+01 Warning: maximum velocity exceeds speed of light 1 0.4153962037E+11 0.1385612588E+01 Warning: maximum velocity exceeds speed of light 1 0.4154100339E+11 0.1385658721E+01 Warning: maximum velocity exceeds speed of light 1 0.4154235575E+11 0.1385703831E+01 Warning: maximum velocity exceeds speed of light 1 0.4154368955E+11 0.1385748321E+01 Warning: maximum velocity exceeds speed of light 1 0.4154501194E+11 0.1385792432E+01 Warning: maximum velocity exceeds speed of light 1 0.4154659552E+11 0.1385845254E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3200 8.923672 1.103E+04 -16.046294 2.952264 51.730864 0.000000 0.000000 0.000000 0.217143 -2.893433 3426 21 -7.6234E+00 8.923672 2.761509 -14.260098 8.123182 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624819 6 2.8747E+05 4.434081 6.647380 2.952264 -11.187299 -13.042843 49.066765 0.000002 0.000000 0.371891 0.177E+04 max increase log_rel_run_E_err -6.6135973008222733 rel_E_err 4.8724340547102406D-12 save LOGS/profile18.data for model 3200 save photos/x200 for model 3200 k, q, energy_removed_layers before adjustment is 874 0.97928009046427533 9.3202136625895823E+049 k, q, energy_removed_layers after adjustment is 879 0.97823124698352293 9.3363113101970274E+049 Layers above q= 0.97823124698352293 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11479.037109375000 max vel inside fraction of cutoff 4429.0918868814733 max c/cs inside fraction of cutoff 4.3817219122164710 average v/vesc outside cutoff 1.8079231803440448 Kinetic plus potential energy outside cutoff 9.3363113101970274E+049 mass inside cutoff 879 50.604747353933590 relax counter 0 log max v [km/s]= 5.6185354418741449 check gamma integral 4.4976254562170345E-002 Warning: maximum velocity exceeds speed of light 1 0.4154849107E+11 0.1385908483E+01 Warning: maximum velocity exceeds speed of light 1 0.4155000449E+11 0.1385958965E+01 Warning: maximum velocity exceeds speed of light 1 0.4155131742E+11 0.1386002760E+01 Warning: maximum velocity exceeds speed of light 1 0.4155256035E+11 0.1386044220E+01 Warning: maximum velocity exceeds speed of light 1 0.4155379382E+11 0.1386085364E+01 Warning: maximum velocity exceeds speed of light 1 0.4155501288E+11 0.1386126027E+01 Warning: maximum velocity exceeds speed of light 1 0.4155620287E+11 0.1386165721E+01 Warning: maximum velocity exceeds speed of light 1 0.4155737034E+11 0.1386204664E+01 Warning: maximum velocity exceeds speed of light 1 0.4155876869E+11 0.1386251307E+01 Warning: maximum velocity exceeds speed of light 1 0.4156044292E+11 0.1386307154E+01 3210 8.933867 1.098E+04 -15.977482 2.986930 51.730864 0.000000 0.000000 0.000000 0.217143 -2.867342 3440 21 -7.5912E+00 8.933867 2.764479 -13.410555 8.291687 -99.000000 51.730864 0.000000 0.059838 0.782857 0.623961 6 2.8747E+05 4.462880 6.645527 2.986930 -10.362897 -13.048785 49.066765 0.000002 0.000000 0.371891 0.178E+04 min_dr_div_cs log_rel_run_E_err -6.5877792297527575 rel_E_err 1.6807871262549716D-10 k, q, energy_removed_layers before adjustment is 874 0.97928009046427533 9.3227170946997985E+049 k, q, energy_removed_layers after adjustment is 881 0.97806857551941828 9.3386705830887429E+049 Layers above q= 0.97806857551941828 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11485.669921875000 max vel inside fraction of cutoff 4508.5804389115747 max c/cs inside fraction of cutoff 4.4824983351800540 average v/vesc outside cutoff 1.7982006122896130 Kinetic plus potential energy outside cutoff 9.3386705830887429E+049 mass inside cutoff 881 50.596332218587939 relax counter 0 log max v [km/s]= 5.6186801673257696 check gamma integral 4.4598200391034848E-002 Warning: maximum velocity exceeds speed of light 1 0.4156185606E+11 0.1386354291E+01 Warning: maximum velocity exceeds speed of light 1 0.4156317034E+11 0.1386398131E+01 Warning: maximum velocity exceeds speed of light 1 0.4156445206E+11 0.1386440884E+01 Warning: maximum velocity exceeds speed of light 1 0.4156570922E+11 0.1386482819E+01 Warning: maximum velocity exceeds speed of light 1 0.4156692842E+11 0.1386523487E+01 Warning: maximum velocity exceeds speed of light 1 0.4156811409E+11 0.1386563037E+01 Warning: maximum velocity exceeds speed of light 1 0.4156927933E+11 0.1386601905E+01 Warning: maximum velocity exceeds speed of light 1 0.4157067495E+11 0.1386648458E+01 Warning: maximum velocity exceeds speed of light 1 0.4157234584E+11 0.1386704192E+01 Warning: maximum velocity exceeds speed of light 1 0.4157373855E+11 0.1386750648E+01 3220 8.943785 1.093E+04 -15.911127 3.023143 51.730864 0.000000 0.000000 0.000000 0.217143 -2.841945 3436 21 -7.6633E+00 8.943785 2.767365 -12.689265 8.452531 -99.000000 51.730864 0.000000 0.059838 0.782857 0.623149 6 2.8747E+05 4.490934 6.643729 3.023143 -9.578755 -13.054559 49.066765 0.000002 0.000000 0.371891 0.178E+04 min_dr_div_cs log_rel_run_E_err -6.5303973309772116 rel_E_err 4.9068408251344267D-12 k, q, energy_removed_layers before adjustment is 875 0.97928009046427533 9.3250291975381376E+049 k, q, energy_removed_layers after adjustment is 882 0.97806857551941828 9.3410703417702065E+049 Layers above q= 0.97806857551941828 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11492.156250000000 max vel inside fraction of cutoff 4573.5292613788160 max c/cs inside fraction of cutoff 4.5686839021736887 average v/vesc outside cutoff 1.8018032441900886 Kinetic plus potential energy outside cutoff 9.3410703417702065E+049 mass inside cutoff 882 50.596332218587939 relax counter 0 log max v [km/s]= 5.6188190805261282 check gamma integral 4.4219381884141949E-002 Warning: maximum velocity exceeds speed of light 1 0.4157502320E+11 0.1386793500E+01 Warning: maximum velocity exceeds speed of light 1 0.4157627460E+11 0.1386835242E+01 Warning: maximum velocity exceeds speed of light 1 0.4157749785E+11 0.1386876045E+01 Warning: maximum velocity exceeds speed of light 1 0.4157867839E+11 0.1386915424E+01 Warning: maximum velocity exceeds speed of light 1 0.4157983061E+11 0.1386953858E+01 Warning: maximum velocity exceeds speed of light 1 0.4158097385E+11 0.1386991992E+01 Warning: maximum velocity exceeds speed of light 1 0.4158234312E+11 0.1387037666E+01 Warning: maximum velocity exceeds speed of light 1 0.4158398245E+11 0.1387092348E+01 Warning: maximum velocity exceeds speed of light 1 0.4158535582E+11 0.1387138159E+01 Warning: maximum velocity exceeds speed of light 1 0.4158663051E+11 0.1387180678E+01 3230 8.953452 1.088E+04 -15.847074 3.061761 51.730864 0.000000 0.000000 0.000000 0.217143 -2.817162 3439 21 -7.6939E+00 8.953452 2.770197 -12.028205 8.606139 -99.000000 51.730864 0.000000 0.059838 0.782857 0.622378 5 2.8747E+05 4.518323 6.641968 3.061761 -8.831212 -13.060223 49.066765 0.000002 0.000000 0.371891 0.179E+04 min_dr_div_cs log_rel_run_E_err -6.4470531046839872 rel_E_err 9.8939430202561585D-09 k, q, energy_removed_layers before adjustment is 875 0.97928009046427533 9.3273688974692635E+049 k, q, energy_removed_layers after adjustment is 883 0.97790554270931263 9.3435055118878788E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11498.562500000000 max vel inside fraction of cutoff 4630.3993002503594 max c/cs inside fraction of cutoff 4.6533522105277445 average v/vesc outside cutoff 1.8005741761503096 Kinetic plus potential energy outside cutoff 9.3435055118878788E+049 mass inside cutoff 883 50.587898390501543 relax counter 0 log max v [km/s]= 5.6189537337767312 check gamma integral 4.3838504225298509E-002 Warning: maximum velocity exceeds speed of light 1 0.4158787061E+11 0.1387222043E+01 Warning: maximum velocity exceeds speed of light 1 0.4158935560E+11 0.1387271577E+01 Warning: maximum velocity exceeds speed of light 1 0.4159113309E+11 0.1387330868E+01 Warning: maximum velocity exceeds speed of light 1 0.4159260684E+11 0.1387380027E+01 Warning: maximum velocity exceeds speed of light 1 0.4159397821E+11 0.1387425771E+01 Warning: maximum velocity exceeds speed of light 1 0.4159533506E+11 0.1387471030E+01 Warning: maximum velocity exceeds speed of light 1 0.4159667104E+11 0.1387515594E+01 Warning: maximum velocity exceeds speed of light 1 0.4159796536E+11 0.1387558768E+01 Warning: maximum velocity exceeds speed of light 1 0.4159922424E+11 0.1387600759E+01 Warning: maximum velocity exceeds speed of light 1 0.4160073159E+11 0.1387651039E+01 3240 8.963855 1.083E+04 -15.778585 3.108302 51.730864 0.000000 0.000000 0.000000 0.217143 -2.790454 3437 21 -7.6124E+00 8.963855 2.773333 -11.405407 8.768384 -99.000000 51.730864 0.000000 0.059838 0.782857 0.621574 6 2.8747E+05 4.547847 6.640022 3.108302 -8.044090 -13.066498 49.066765 0.000002 0.000000 0.371891 0.179E+04 max increase log_rel_run_E_err -6.4253099392317914 rel_E_err 1.1015763567913647D-09 k, q, energy_removed_layers before adjustment is 875 0.97928009046427533 9.3299350317985775E+049 k, q, energy_removed_layers after adjustment is 883 0.97790554270931263 9.3461822041201698E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11505.703125000000 max vel inside fraction of cutoff 4673.4551364209401 max c/cs inside fraction of cutoff 4.7241177698393173 average v/vesc outside cutoff 1.8045031963599751 Kinetic plus potential energy outside cutoff 9.3461822041201698E+049 mass inside cutoff 883 50.587898390501543 relax counter 0 log max v [km/s]= 5.6191009682203301 check gamma integral 4.3410898753225104E-002 Warning: maximum velocity exceeds speed of light 1 0.4160253568E+11 0.1387711217E+01 Warning: maximum velocity exceeds speed of light 1 0.4160404852E+11 0.1387761680E+01 Warning: maximum velocity exceeds speed of light 1 0.4160545757E+11 0.1387808681E+01 Warning: maximum velocity exceeds speed of light 1 0.4160683222E+11 0.1387854534E+01 Warning: maximum velocity exceeds speed of light 1 0.4160815422E+11 0.1387898632E+01 Warning: maximum velocity exceeds speed of light 1 0.4160931641E+11 0.1387937398E+01 Warning: maximum velocity exceeds speed of light 1 0.4161030373E+11 0.1387970332E+01 Warning: maximum velocity exceeds speed of light 1 0.4161120723E+11 0.1388000469E+01 Warning: maximum velocity exceeds speed of light 1 0.4161207869E+11 0.1388029538E+01 Warning: maximum velocity exceeds speed of light 1 0.4161292845E+11 0.1388057883E+01 3250 8.972467 1.079E+04 -15.722134 3.151783 51.730864 0.000000 0.000000 0.000000 0.217143 -2.768287 3457 21 -7.8535E+00 8.972467 2.776081 -10.895597 8.900487 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620931 6 2.8747E+05 4.572337 6.638324 3.151783 -7.405530 -13.071994 49.066765 0.000002 0.000000 0.371891 0.180E+04 min_dr_div_cs log_rel_run_E_err -6.4207168826666470 rel_E_err 5.1658245405100461D-12 save photos/x250 for model 3250 k, q, energy_removed_layers before adjustment is 875 0.97928009046427533 9.3321618015135645E+049 k, q, energy_removed_layers after adjustment is 883 0.97790554270931263 9.3485017673937110E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11511.998046875000 max vel inside fraction of cutoff 4742.6129715308507 max c/cs inside fraction of cutoff 4.7973649943835053 average v/vesc outside cutoff 1.8079555231290489 Kinetic plus potential energy outside cutoff 9.3485017673937110E+049 mass inside cutoff 883 50.587898390501543 relax counter 0 log max v [km/s]= 5.6192282797342399 check gamma integral 4.3039098926811514E-002 Warning: maximum velocity exceeds speed of light 1 0.4161375794E+11 0.1388085552E+01 Warning: maximum velocity exceeds speed of light 1 0.4161457697E+11 0.1388112871E+01 Warning: maximum velocity exceeds speed of light 1 0.4161555836E+11 0.1388145607E+01 Warning: maximum velocity exceeds speed of light 1 0.4161673397E+11 0.1388184821E+01 Warning: maximum velocity exceeds speed of light 1 0.4161772446E+11 0.1388217860E+01 Warning: maximum velocity exceeds speed of light 1 0.4161864651E+11 0.1388248617E+01 Warning: maximum velocity exceeds speed of light 1 0.4161954881E+11 0.1388278714E+01 Warning: maximum velocity exceeds speed of light 1 0.4162042611E+11 0.1388307978E+01 Warning: maximum velocity exceeds speed of light 1 0.4162127013E+11 0.1388336131E+01 Warning: maximum velocity exceeds speed of light 1 0.4162208455E+11 0.1388363297E+01 3260 8.978553 1.075E+04 -15.682410 3.185648 51.730864 0.000000 0.000000 0.000000 0.217143 -2.752579 3445 21 -7.8660E+00 8.978553 2.778164 -10.533482 8.992535 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620493 6 2.8747E+05 4.589675 6.637039 3.185648 -6.961423 -13.076162 49.068983 0.000002 0.000000 0.371891 0.180E+04 min_dr_div_cs log_rel_run_E_err -6.4175958120976171 rel_E_err 5.3179992975853057D-12 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3337438973585769E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3501514229200873E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11516.798828125000 max vel inside fraction of cutoff 4775.0660100117275 max c/cs inside fraction of cutoff 4.8670332048825200 average v/vesc outside cutoff 1.8105614406110389 Kinetic plus potential energy outside cutoff 9.3501514229200873E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6193238271493744 check gamma integral 4.2764520600501975E-002 Warning: maximum velocity exceeds speed of light 1 0.4162306043E+11 0.1388395849E+01 Warning: maximum velocity exceeds speed of light 1 0.4162422940E+11 0.1388434842E+01 Warning: maximum velocity exceeds speed of light 1 0.4162562920E+11 0.1388481534E+01 Warning: maximum velocity exceeds speed of light 1 0.4162686304E+11 0.1388522691E+01 Warning: maximum velocity exceeds speed of light 1 0.4162804678E+11 0.1388562176E+01 Warning: maximum velocity exceeds speed of light 1 0.4162920636E+11 0.1388600855E+01 Warning: maximum velocity exceeds speed of light 1 0.4163032628E+11 0.1388638212E+01 Warning: maximum velocity exceeds speed of light 1 0.4163140662E+11 0.1388674248E+01 Warning: maximum velocity exceeds speed of light 1 0.4163246706E+11 0.1388709620E+01 Warning: maximum velocity exceeds speed of light 1 0.4163373709E+11 0.1388751984E+01 3270 8.985599 1.071E+04 -15.636700 3.228483 51.730864 0.000000 0.000000 0.000000 0.217143 -2.734354 3434 21 -7.6653E+00 8.985599 2.780844 -10.158193 9.097476 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619999 7 2.8747E+05 4.609776 6.635392 3.228483 -6.454794 -13.081524 49.075594 0.000002 0.000000 0.371891 0.180E+04 max increase log_rel_run_E_err -6.4063619868965640 rel_E_err 5.2796246994443632D-12 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3358846106086831E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3523750324286287E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11523.007812500000 max vel inside fraction of cutoff 4770.3973989215647 max c/cs inside fraction of cutoff 4.8799659642515341 average v/vesc outside cutoff 1.8139472957604970 Kinetic plus potential energy outside cutoff 9.3523750324286287E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6194453954245258 check gamma integral 4.2433260885569923E-002 Warning: maximum velocity exceeds speed of light 1 0.4163525756E+11 0.1388802702E+01 Warning: maximum velocity exceeds speed of light 1 0.4163651541E+11 0.1388844659E+01 Warning: maximum velocity exceeds speed of light 1 0.4163769192E+11 0.1388883903E+01 Warning: maximum velocity exceeds speed of light 1 0.4163884536E+11 0.1388922378E+01 Warning: maximum velocity exceeds speed of light 1 0.4163995022E+11 0.1388959232E+01 Warning: maximum velocity exceeds speed of light 1 0.4164098999E+11 0.1388993915E+01 Warning: maximum velocity exceeds speed of light 1 0.4164223529E+11 0.1389035454E+01 Warning: maximum velocity exceeds speed of light 1 0.4164372615E+11 0.1389085183E+01 Warning: maximum velocity exceeds speed of light 1 0.4164551014E+11 0.1389144691E+01 Warning: maximum velocity exceeds speed of light 1 0.4164693412E+11 0.1389192190E+01 3280 8.992228 1.066E+04 -15.594147 3.273417 51.730864 0.000000 0.000000 0.000000 0.217143 -2.717158 3461 21 -7.6066E+00 8.992228 2.783920 -9.747263 9.194250 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619550 7 2.8747E+05 4.628719 6.633508 3.273417 -5.986075 -13.087676 49.075594 0.000002 0.000000 0.371891 0.181E+04 min_dr_div_cs log_rel_run_E_err -6.3908559421463389 rel_E_err 6.9225295038063861D-10 k, q, energy_removed_layers before adjustment is 876 0.97928009046427533 9.3383198340645363E+049 k, q, energy_removed_layers after adjustment is 884 0.97790554270931263 9.3549001143317346E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11530.175781250000 max vel inside fraction of cutoff 4794.0331343466487 max c/cs inside fraction of cutoff 4.9447092563931028 average v/vesc outside cutoff 1.8178448282769244 Kinetic plus potential energy outside cutoff 9.3549001143317346E+049 mass inside cutoff 884 50.587898390501543 relax counter 0 log max v [km/s]= 5.6195830359479357 check gamma integral 4.2105057408789219E-002 Warning: maximum velocity exceeds speed of light 1 0.4164807125E+11 0.1389230120E+01 Warning: maximum velocity exceeds speed of light 1 0.4164901628E+11 0.1389261643E+01 Warning: maximum velocity exceeds speed of light 1 0.4164986037E+11 0.1389289799E+01 Warning: maximum velocity exceeds speed of light 1 0.4165063304E+11 0.1389315573E+01 Warning: maximum velocity exceeds speed of light 1 0.4165136427E+11 0.1389339964E+01 Warning: maximum velocity exceeds speed of light 1 0.4165205985E+11 0.1389363166E+01 Warning: maximum velocity exceeds speed of light 1 0.4165289342E+11 0.1389390971E+01 Warning: maximum velocity exceeds speed of light 1 0.4165389211E+11 0.1389424283E+01 Warning: maximum velocity exceeds speed of light 1 0.4165508823E+11 0.1389464182E+01 Warning: maximum velocity exceeds speed of light 1 0.4165652025E+11 0.1389511949E+01 3290 8.995811 1.062E+04 -15.571240 3.301206 51.730864 0.000000 0.000000 0.000000 0.217143 -2.707837 3466 21 -7.5975E+00 8.995811 2.786180 -9.450833 9.246087 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619315 7 2.8747E+05 4.638972 6.632128 3.301206 -5.735725 -13.092198 49.075594 0.000002 0.000000 0.371891 0.181E+04 min_dr_div_cs log_rel_run_E_err -6.3807148210373095 rel_E_err 5.2280533642207276D-10 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3399914120852542E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3566394713009383E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11535.474609375000 max vel inside fraction of cutoff 4770.5054450592324 max c/cs inside fraction of cutoff 4.9504344320870786 average v/vesc outside cutoff 1.8207072010617318 Kinetic plus potential energy outside cutoff 9.3566394713009383E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6196829886268729 check gamma integral 4.1913573628582834E-002 Warning: maximum velocity exceeds speed of light 1 0.4165783220E+11 0.1389555711E+01 Warning: maximum velocity exceeds speed of light 1 0.4165911687E+11 0.1389598563E+01 Warning: maximum velocity exceeds speed of light 1 0.4166038660E+11 0.1389640916E+01 Warning: maximum velocity exceeds speed of light 1 0.4166162477E+11 0.1389682217E+01 Warning: maximum velocity exceeds speed of light 1 0.4166283269E+11 0.1389722509E+01 Warning: maximum velocity exceeds speed of light 1 0.4166402878E+11 0.1389762406E+01 Warning: maximum velocity exceeds speed of light 1 0.4166546070E+11 0.1389810170E+01 Warning: maximum velocity exceeds speed of light 1 0.4166717413E+11 0.1389867324E+01 Warning: maximum velocity exceeds speed of light 1 0.4166860462E+11 0.1389915040E+01 Warning: maximum velocity exceeds speed of light 1 0.4166995582E+11 0.1389960111E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3300 8.998551 1.057E+04 -15.553076 3.328509 51.730864 0.000000 0.000000 0.000000 0.217143 -2.700693 3465 21 -7.6132E+00 8.998551 2.789390 -9.109368 9.287356 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619139 7 2.8747E+05 4.646823 6.630173 3.328509 -5.543415 -13.098620 49.075594 0.000002 0.000000 0.371891 0.182E+04 min_dr_div_cs log_rel_run_E_err -6.3617281483942465 rel_E_err 5.2499476178565507D-12 save LOGS/profile19.data for model 3300 save photos/x300 for model 3300 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3424926397445389E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3592407628106220E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11543.046875000000 max vel inside fraction of cutoff 4782.6003376011095 max c/cs inside fraction of cutoff 5.0102201102959976 average v/vesc outside cutoff 1.8248010872606499 Kinetic plus potential energy outside cutoff 9.3592407628106220E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6198230400370122 check gamma integral 4.1735037429707730E-002 Warning: maximum velocity exceeds speed of light 1 0.4167128373E+11 0.1390004405E+01 Warning: maximum velocity exceeds speed of light 1 0.4167255082E+11 0.1390046671E+01 Warning: maximum velocity exceeds speed of light 1 0.4167373196E+11 0.1390086069E+01 Warning: maximum velocity exceeds speed of light 1 0.4167483498E+11 0.1390122862E+01 Warning: maximum velocity exceeds speed of light 1 0.4167588673E+11 0.1390157945E+01 Warning: maximum velocity exceeds speed of light 1 0.4167690015E+11 0.1390191749E+01 Warning: maximum velocity exceeds speed of light 1 0.4167788669E+11 0.1390224656E+01 Warning: maximum velocity exceeds speed of light 1 0.4167885531E+11 0.1390256966E+01 Warning: maximum velocity exceeds speed of light 1 0.4167981449E+11 0.1390288961E+01 Warning: maximum velocity exceeds speed of light 1 0.4168076990E+11 0.1390320830E+01 3310 8.998882 1.053E+04 -15.549891 3.338223 51.730864 0.000000 0.000000 0.000000 0.217143 -2.699829 3465 21 -7.7558E+00 8.998882 2.792009 -8.849636 9.294989 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619118 7 2.8747E+05 4.647772 6.628583 3.338223 -5.517094 -13.103858 49.075594 0.000002 0.000000 0.371891 0.182E+04 min_dr_div_cs log_rel_run_E_err -6.3612264560561940 rel_E_err 5.2480571850817356D-12 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3445162828159435E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3613471322976942E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11549.265625000000 max vel inside fraction of cutoff 4794.0815096960159 max c/cs inside fraction of cutoff 5.0509379358436757 average v/vesc outside cutoff 1.8281524408662322 Kinetic plus potential energy outside cutoff 9.3613471322976942E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6199357323434720 check gamma integral 4.1673789536056181E-002 Warning: maximum velocity exceeds speed of light 1 0.4168191414E+11 0.1390358998E+01 Warning: maximum velocity exceeds speed of light 1 0.4168328401E+11 0.1390404691E+01 Warning: maximum velocity exceeds speed of light 1 0.4168442852E+11 0.1390442868E+01 Warning: maximum velocity exceeds speed of light 1 0.4168550982E+11 0.1390478937E+01 Warning: maximum velocity exceeds speed of light 1 0.4168657132E+11 0.1390514345E+01 Warning: maximum velocity exceeds speed of light 1 0.4168758195E+11 0.1390548056E+01 Warning: maximum velocity exceeds speed of light 1 0.4168854811E+11 0.1390580283E+01 Warning: maximum velocity exceeds speed of light 1 0.4168948458E+11 0.1390611520E+01 Warning: maximum velocity exceeds speed of light 1 0.4169060614E+11 0.1390648932E+01 Warning: maximum velocity exceeds speed of light 1 0.4169194884E+11 0.1390693719E+01 3320 8.997829 1.049E+04 -15.555780 3.335707 51.730864 0.000000 0.000000 0.000000 0.217143 -2.702578 3477 21 -7.5996E+00 8.997829 2.794751 -8.589003 9.282119 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619185 8 2.8747E+05 4.644753 6.626918 3.335707 -5.587338 -13.109345 49.075594 0.000002 0.000000 0.371891 0.182E+04 max increase log_rel_run_E_err -6.3512180701454408 rel_E_err 5.3098728374634121D-12 k, q, energy_removed_layers before adjustment is 877 0.97928009046427533 9.3466188143573919E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3635354475695214E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11555.814453125000 max vel inside fraction of cutoff 4761.3593818848494 max c/cs inside fraction of cutoff 5.0620848795918034 average v/vesc outside cutoff 1.8316729076942213 Kinetic plus potential energy outside cutoff 9.3635354475695214E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6200521962022503 check gamma integral 4.1686370117039538E-002 Warning: maximum velocity exceeds speed of light 1 0.4169355552E+11 0.1390747312E+01 Warning: maximum velocity exceeds speed of light 1 0.4169494402E+11 0.1390793628E+01 Warning: maximum velocity exceeds speed of light 1 0.4169660530E+11 0.1390849042E+01 Warning: maximum velocity exceeds speed of light 1 0.4169859176E+11 0.1390915303E+01 Warning: maximum velocity exceeds speed of light 1 0.4170017642E+11 0.1390968162E+01 Warning: maximum velocity exceeds speed of light 1 0.4170158671E+11 0.1391015204E+01 Warning: maximum velocity exceeds speed of light 1 0.4170295086E+11 0.1391060707E+01 Warning: maximum velocity exceeds speed of light 1 0.4170425084E+11 0.1391104070E+01 Warning: maximum velocity exceeds speed of light 1 0.4170548591E+11 0.1391145267E+01 Warning: maximum velocity exceeds speed of light 1 0.4170669211E+11 0.1391185502E+01 3330 8.994779 1.043E+04 -15.575647 3.313194 51.730864 0.000000 0.000000 0.000000 0.217143 -2.710535 3476 21 -7.6346E+00 8.994779 2.798427 -8.309214 9.237499 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619380 7 2.8747E+05 4.636013 6.624686 3.313194 -5.800740 -13.116698 49.075594 0.000002 0.000000 0.371891 0.183E+04 min_dr_div_cs log_rel_run_E_err -6.3339209319357366 rel_E_err 7.0704201358265627D-10 k, q, energy_removed_layers before adjustment is 878 0.97910001318239581 9.3537055890610161E+049 k, q, energy_removed_layers after adjustment is 885 0.97790554270931263 9.3664370088004259E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11564.656250000000 max vel inside fraction of cutoff 4715.3575408869983 max c/cs inside fraction of cutoff 5.0558205748315164 average v/vesc outside cutoff 1.8364089426091510 Kinetic plus potential energy outside cutoff 9.3664370088004259E+049 mass inside cutoff 885 50.587898390501543 relax counter 0 log max v [km/s]= 5.6202057459728341 check gamma integral 4.1811637122530290E-002 Warning: maximum velocity exceeds speed of light 1 0.4170789190E+11 0.1391225522E+01 Warning: maximum velocity exceeds speed of light 1 0.4170932784E+11 0.1391273420E+01 Warning: maximum velocity exceeds speed of light 1 0.4171104550E+11 0.1391330715E+01 Warning: maximum velocity exceeds speed of light 1 0.4171247383E+11 0.1391378359E+01 Warning: maximum velocity exceeds speed of light 1 0.4171382338E+11 0.1391423375E+01 Warning: maximum velocity exceeds speed of light 1 0.4171514543E+11 0.1391467474E+01 Warning: maximum velocity exceeds speed of light 1 0.4171639924E+11 0.1391509297E+01 Warning: maximum velocity exceeds speed of light 1 0.4171789957E+11 0.1391559342E+01 Warning: maximum velocity exceeds speed of light 1 0.4171969385E+11 0.1391619193E+01 Warning: maximum velocity exceeds speed of light 1 0.4172120701E+11 0.1391669667E+01 3340 8.989791 1.037E+04 -15.608180 3.272754 51.730864 0.000000 0.000000 0.000000 0.217143 -2.723530 3475 21 -7.5244E+00 8.989791 2.802115 -8.067600 9.163668 -99.000000 51.730864 0.000000 0.059838 0.782857 0.619705 8 2.8747E+05 4.621731 6.622450 3.272754 -6.152575 -13.124075 49.075594 0.000002 0.000000 0.371891 0.183E+04 min_dr_div_cs log_rel_run_E_err -6.3031914760014995 rel_E_err 6.4116230433338230D-10 k, q, energy_removed_layers before adjustment is 877 0.97910001318239581 9.3565023050900084E+049 k, q, energy_removed_layers after adjustment is 884 0.97790554270931263 9.3693098102687453E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11573.597656250000 max vel inside fraction of cutoff 4667.5668734829915 max c/cs inside fraction of cutoff 5.0915274124370526 average v/vesc outside cutoff 1.8411792561598661 Kinetic plus potential energy outside cutoff 9.3693098102687453E+049 mass inside cutoff 884 50.587898390501543 relax counter 0 log max v [km/s]= 5.6203568642834476 check gamma integral 4.2037710546979787E-002 Warning: maximum velocity exceeds speed of light 1 0.4172242960E+11 0.1391710448E+01 Warning: maximum velocity exceeds speed of light 1 0.4172389260E+11 0.1391759248E+01 Warning: maximum velocity exceeds speed of light 1 0.4172564228E+11 0.1391817611E+01 Warning: maximum velocity exceeds speed of light 1 0.4172703824E+11 0.1391864176E+01 Warning: maximum velocity exceeds speed of light 1 0.4172815260E+11 0.1391901347E+01 Warning: maximum velocity exceeds speed of light 1 0.4172904254E+11 0.1391931032E+01 Warning: maximum velocity exceeds speed of light 1 0.4172979131E+11 0.1391956008E+01 Warning: maximum velocity exceeds speed of light 1 0.4173068825E+11 0.1391985927E+01 Warning: maximum velocity exceeds speed of light 1 0.4173176231E+11 0.1392021753E+01 Warning: maximum velocity exceeds speed of light 1 0.4173304791E+11 0.1392064637E+01 3350 8.984246 1.032E+04 -15.644062 3.230811 51.730864 0.000000 0.000000 0.000000 0.217143 -2.737942 3467 21 -7.5852E+00 8.984246 2.805176 -7.895146 9.081571 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620075 9 2.8747E+05 4.605877 6.620593 3.230811 -6.546783 -13.130198 49.075594 0.000002 0.000000 0.371891 0.184E+04 min_dr_div_cs log_rel_run_E_err -6.2975450609247989 rel_E_err 1.0947725215658999D-11 save photos/x350 for model 3350 k, q, energy_removed_layers before adjustment is 879 0.97910001318239581 9.3587977626025643E+049 k, q, energy_removed_layers after adjustment is 886 0.97790554270931263 9.3716646252599121E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11581.074218750000 max vel inside fraction of cutoff 4644.5880521744875 max c/cs inside fraction of cutoff 5.1101401555378496 average v/vesc outside cutoff 1.8451538770377967 Kinetic plus potential energy outside cutoff 9.3716646252599121E+049 mass inside cutoff 886 50.587898390501543 relax counter 0 log max v [km/s]= 5.6204801039472132 check gamma integral 4.2284481341449458E-002 Warning: maximum velocity exceeds speed of light 1 0.4173419883E+11 0.1392103027E+01 Warning: maximum velocity exceeds speed of light 1 0.4173534132E+11 0.1392141136E+01 Warning: maximum velocity exceeds speed of light 1 0.4173643720E+11 0.1392177691E+01 Warning: maximum velocity exceeds speed of light 1 0.4173746697E+11 0.1392212041E+01 Warning: maximum velocity exceeds speed of light 1 0.4173869964E+11 0.1392253158E+01 Warning: maximum velocity exceeds speed of light 1 0.4174017445E+11 0.1392302352E+01 Warning: maximum velocity exceeds speed of light 1 0.4174139398E+11 0.1392343031E+01 Warning: maximum velocity exceeds speed of light 1 0.4174252378E+11 0.1392380718E+01 Warning: maximum velocity exceeds speed of light 1 0.4174360293E+11 0.1392416714E+01 Warning: maximum velocity exceeds speed of light 1 0.4174463243E+11 0.1392451054E+01 3360 8.977717 1.028E+04 -15.686819 3.186210 51.730864 0.000000 0.000000 0.000000 0.217143 -2.754876 3483 21 -7.6716E+00 8.977717 2.808220 -7.758589 8.983032 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620525 9 2.8747E+05 4.587232 6.618745 3.186210 -7.018378 -13.136288 49.075594 0.000002 0.000000 0.371891 0.184E+04 min_dr_div_cs log_rel_run_E_err -6.2871561867484926 rel_E_err 5.8327499369083063D-12 k, q, energy_removed_layers before adjustment is 879 0.97910001318239581 9.3610566114465040E+049 k, q, energy_removed_layers after adjustment is 886 0.97790554270931263 9.3739787338804009E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11588.558593750000 max vel inside fraction of cutoff 4604.5546843159109 max c/cs inside fraction of cutoff 5.1024096850505112 average v/vesc outside cutoff 1.8491198526719710 Kinetic plus potential energy outside cutoff 9.3739787338804009E+049 mass inside cutoff 886 50.587898390501543 relax counter 0 log max v [km/s]= 5.6206006413259360 check gamma integral 4.2569198918521400E-002 Warning: maximum velocity exceeds speed of light 1 0.4174562520E+11 0.1392484170E+01 Warning: maximum velocity exceeds speed of light 1 0.4174648332E+11 0.1392512794E+01 Warning: maximum velocity exceeds speed of light 1 0.4174722151E+11 0.1392537417E+01 Warning: maximum velocity exceeds speed of light 1 0.4174793070E+11 0.1392561073E+01 Warning: maximum velocity exceeds speed of light 1 0.4174861256E+11 0.1392583817E+01 Warning: maximum velocity exceeds speed of light 1 0.4174925753E+11 0.1392605331E+01 Warning: maximum velocity exceeds speed of light 1 0.4175003027E+11 0.1392631107E+01 Warning: maximum velocity exceeds speed of light 1 0.4175095576E+11 0.1392661978E+01 Warning: maximum velocity exceeds speed of light 1 0.4175172200E+11 0.1392687537E+01 Warning: maximum velocity exceeds speed of light 1 0.4175243109E+11 0.1392711190E+01 3370 8.972729 1.025E+04 -15.719630 3.155746 51.730864 0.000000 0.000000 0.000000 0.217143 -2.767782 3488 21 -7.8265E+00 8.972729 2.810297 -7.684942 8.906807 -99.000000 51.730864 0.000000 0.059838 0.782857 0.620878 8 2.8747E+05 4.573010 6.617484 3.155746 -7.383216 -13.140444 49.075594 0.000002 0.000000 0.371891 0.185E+04 min_dr_div_cs log_rel_run_E_err -6.2725744431101438 rel_E_err 6.9457567001181073D-10 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3625841277168323E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3755418031923481E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11593.699218750000 max vel inside fraction of cutoff 4590.9502937371180 max c/cs inside fraction of cutoff 5.1408068633336566 average v/vesc outside cutoff 1.8518331835655160 Kinetic plus potential energy outside cutoff 9.3755418031923481E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6206817678843848 check gamma integral 4.2780144160899300E-002 Warning: maximum velocity exceeds speed of light 1 0.4175312503E+11 0.1392734337E+01 Warning: maximum velocity exceeds speed of light 1 0.4175379360E+11 0.1392756638E+01 Warning: maximum velocity exceeds speed of light 1 0.4175443555E+11 0.1392778052E+01 Warning: maximum velocity exceeds speed of light 1 0.4175506108E+11 0.1392798917E+01 Warning: maximum velocity exceeds speed of light 1 0.4175581051E+11 0.1392823915E+01 Warning: maximum velocity exceeds speed of light 1 0.4175670813E+11 0.1392853857E+01 Warning: maximum velocity exceeds speed of light 1 0.4175751829E+11 0.1392880880E+01 Warning: maximum velocity exceeds speed of light 1 0.4175831669E+11 0.1392907512E+01 Warning: maximum velocity exceeds speed of light 1 0.4175907604E+11 0.1392932842E+01 Warning: maximum velocity exceeds speed of light 1 0.4175980868E+11 0.1392957280E+01 3380 8.967564 1.022E+04 -15.753702 3.127126 51.730864 0.000000 0.000000 0.000000 0.217143 -2.781128 3489 21 -7.8055E+00 8.967564 2.812285 -7.640586 8.827147 -99.000000 51.730864 0.000000 0.059838 0.782857 0.621251 8 2.8747E+05 4.558297 6.616279 3.127126 -7.765154 -13.144420 49.075594 0.000002 0.000000 0.371891 0.185E+04 min_dr_div_cs log_rel_run_E_err -6.2596796917881168 rel_E_err 7.6714602168366579D-10 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3640361962180061E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3770262367149359E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11598.638671875000 max vel inside fraction of cutoff 4530.2178567045894 max c/cs inside fraction of cutoff 5.0832080164792242 average v/vesc outside cutoff 1.8544362224014226 Kinetic plus potential energy outside cutoff 9.3770262367149359E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6207585003388552 check gamma integral 4.2991136561037750E-002 Warning: maximum velocity exceeds speed of light 1 0.4176053714E+11 0.1392981579E+01 Warning: maximum velocity exceeds speed of light 1 0.4176124966E+11 0.1393005346E+01 Warning: maximum velocity exceeds speed of light 1 0.4176194331E+11 0.1393028484E+01 Warning: maximum velocity exceeds speed of light 1 0.4176262082E+11 0.1393051083E+01 Warning: maximum velocity exceeds speed of light 1 0.4176343239E+11 0.1393078154E+01 Warning: maximum velocity exceeds speed of light 1 0.4176440423E+11 0.1393110571E+01 Warning: maximum velocity exceeds speed of light 1 0.4176524101E+11 0.1393138483E+01 Warning: maximum velocity exceeds speed of light 1 0.4176602595E+11 0.1393164666E+01 Warning: maximum velocity exceeds speed of light 1 0.4176677423E+11 0.1393189626E+01 Warning: maximum velocity exceeds speed of light 1 0.4176748995E+11 0.1393213499E+01 3390 8.961723 1.018E+04 -15.792349 3.097807 51.730864 0.000000 0.000000 0.000000 0.217143 -2.796198 3482 21 -7.8084E+00 8.961723 2.814379 -7.620749 8.736247 -99.000000 51.730864 0.000000 0.059838 0.782857 0.621682 8 2.8747E+05 4.541679 6.615012 3.097807 -8.202221 -13.148609 49.075594 0.000002 0.000000 0.371891 0.185E+04 min_dr_div_cs log_rel_run_E_err -6.2416336366052860 rel_E_err 7.7962941007423696D-10 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3655543403781719E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3785767168962937E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11603.865234375000 max vel inside fraction of cutoff 4484.5632275150674 max c/cs inside fraction of cutoff 5.0737942875514621 average v/vesc outside cutoff 1.8571843806033788 Kinetic plus potential energy outside cutoff 9.3785767168962937E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6208383767805810 check gamma integral 4.3220672934862002E-002 Warning: maximum velocity exceeds speed of light 1 0.4176819698E+11 0.1393237083E+01 Warning: maximum velocity exceeds speed of light 1 0.4176888935E+11 0.1393260178E+01 Warning: maximum velocity exceeds speed of light 1 0.4176956522E+11 0.1393282723E+01 Warning: maximum velocity exceeds speed of light 1 0.4177037481E+11 0.1393309728E+01 Warning: maximum velocity exceeds speed of light 1 0.4177134424E+11 0.1393342065E+01 Warning: maximum velocity exceeds speed of light 1 0.4177217580E+11 0.1393369803E+01 Warning: maximum velocity exceeds speed of light 1 0.4177295254E+11 0.1393395712E+01 Warning: maximum velocity exceeds speed of light 1 0.4177371563E+11 0.1393421166E+01 Warning: maximum velocity exceeds speed of light 1 0.4177445136E+11 0.1393445707E+01 Warning: maximum velocity exceeds speed of light 1 0.4177515221E+11 0.1393469085E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3400 8.955425 1.015E+04 -15.834036 3.069179 51.730864 0.000000 0.000000 0.000000 0.217143 -2.812430 3482 21 -7.8101E+00 8.955425 2.816493 -7.640996 8.637504 -99.000000 51.730864 0.000000 0.059838 0.782857 0.622156 8 2.8747E+05 4.523779 6.613736 3.069179 -8.679381 -13.152839 49.075594 0.000002 0.000000 0.371891 0.186E+04 min_dr_div_cs log_rel_run_E_err -6.2321115024523719 rel_E_err 1.2088322221549182D-09 save LOGS/profile20.data for model 3400 save photos/x400 for model 3400 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3670762872827010E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3801296096433804E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11609.167968750000 max vel inside fraction of cutoff 4430.6374395090415 max c/cs inside fraction of cutoff 5.0723935648444147 average v/vesc outside cutoff 1.8599659618368320 Kinetic plus potential energy outside cutoff 9.3801296096433804E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6209180409766297 check gamma integral 4.3457390798213653E-002 Warning: maximum velocity exceeds speed of light 1 0.4177599165E+11 0.1393497086E+01 Warning: maximum velocity exceeds speed of light 1 0.4177699670E+11 0.1393530610E+01 Warning: maximum velocity exceeds speed of light 1 0.4177786047E+11 0.1393559423E+01 Warning: maximum velocity exceeds speed of light 1 0.4177867016E+11 0.1393586431E+01 Warning: maximum velocity exceeds speed of light 1 0.4177942699E+11 0.1393611676E+01 Warning: maximum velocity exceeds speed of light 1 0.4178033331E+11 0.1393641908E+01 Warning: maximum velocity exceeds speed of light 1 0.4178141819E+11 0.1393678095E+01 Warning: maximum velocity exceeds speed of light 1 0.4178230507E+11 0.1393707678E+01 Warning: maximum velocity exceeds speed of light 1 0.4178312966E+11 0.1393735184E+01 Warning: maximum velocity exceeds speed of light 1 0.4178391370E+11 0.1393761337E+01 3410 8.947681 1.011E+04 -15.885266 3.037246 51.730864 0.000000 0.000000 0.000000 0.217143 -2.832372 3487 21 -7.7527E+00 8.947681 2.818944 -7.720560 8.515092 -99.000000 51.730864 0.000000 0.059838 0.782857 0.622751 9 2.8747E+05 4.501793 6.612260 3.037246 -9.274277 -13.157743 49.075594 0.000002 0.000000 0.371891 0.186E+04 min_dr_div_cs log_rel_run_E_err -6.2176892856422903 rel_E_err 4.7671462608843638D-12 k, q, energy_removed_layers before adjustment is 881 0.97910001318239581 9.3687625138677190E+049 k, q, energy_removed_layers after adjustment is 888 0.97790554270931263 9.3818495533357965E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11615.343750000000 max vel inside fraction of cutoff 4351.5430962252776 max c/cs inside fraction of cutoff 5.0449899187915088 average v/vesc outside cutoff 1.8631841578339459 Kinetic plus potential energy outside cutoff 9.3818495533357965E+049 mass inside cutoff 888 50.587898390501543 relax counter 0 log max v [km/s]= 5.6210091158924076 check gamma integral 4.3734981837822255E-002 Warning: maximum velocity exceeds speed of light 1 0.4178464368E+11 0.1393785686E+01 Warning: maximum velocity exceeds speed of light 1 0.4178551788E+11 0.1393814846E+01 Warning: maximum velocity exceeds speed of light 1 0.4178656435E+11 0.1393849753E+01 Warning: maximum velocity exceeds speed of light 1 0.4178742004E+11 0.1393878296E+01 Warning: maximum velocity exceeds speed of light 1 0.4178821965E+11 0.1393904968E+01 Warning: maximum velocity exceeds speed of light 1 0.4178898595E+11 0.1393930529E+01 Warning: maximum velocity exceeds speed of light 1 0.4178970445E+11 0.1393954495E+01 Warning: maximum velocity exceeds speed of light 1 0.4179056490E+11 0.1393983197E+01 Warning: maximum velocity exceeds speed of light 1 0.4179159492E+11 0.1394017555E+01 Warning: maximum velocity exceeds speed of light 1 0.4179244134E+11 0.1394045788E+01 3420 8.939700 1.008E+04 -15.938353 3.007055 51.730864 0.000000 0.000000 0.000000 0.217143 -2.852905 3479 21 -7.7108E+00 8.939700 2.821365 -7.847849 8.387115 -99.000000 51.730864 0.000000 0.059838 0.782857 0.623379 9 2.8747E+05 4.479162 6.610805 3.007055 -9.898048 -13.162585 49.075594 0.000002 0.000000 0.371891 0.186E+04 min_dr_div_cs log_rel_run_E_err -6.2087479567761203 rel_E_err 3.4918431408044894D-11 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3704745322027561E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3835927352778209E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11621.472656250000 max vel inside fraction of cutoff 4271.3081289774636 max c/cs inside fraction of cutoff 5.0132129611145713 average v/vesc outside cutoff 1.8663851358725121 Kinetic plus potential energy outside cutoff 9.3835927352778209E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6210977415949417 check gamma integral 4.4009705960204835E-002 Warning: maximum velocity exceeds speed of light 1 0.4179323164E+11 0.1394072150E+01 Warning: maximum velocity exceeds speed of light 1 0.4179398745E+11 0.1394097361E+01 Warning: maximum velocity exceeds speed of light 1 0.4179469497E+11 0.1394120961E+01 Warning: maximum velocity exceeds speed of light 1 0.4179554228E+11 0.1394149224E+01 Warning: maximum velocity exceeds speed of light 1 0.4179655655E+11 0.1394183057E+01 Warning: maximum velocity exceeds speed of light 1 0.4179738237E+11 0.1394210603E+01 Warning: maximum velocity exceeds speed of light 1 0.4179837099E+11 0.1394243580E+01 Warning: maximum velocity exceeds speed of light 1 0.4179955390E+11 0.1394283038E+01 Warning: maximum velocity exceeds speed of light 1 0.4180054565E+11 0.1394316119E+01 Warning: maximum velocity exceeds speed of light 1 0.4180148839E+11 0.1394347565E+01 3430 8.930843 1.004E+04 -15.997815 2.975828 51.730864 0.000000 0.000000 0.000000 0.217143 -2.875681 3463 21 -7.6544E+00 8.930843 2.823973 -8.041167 8.242592 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624091 8 2.8747E+05 4.454077 6.609239 2.975828 -10.603876 -13.167803 49.075594 0.000002 0.000000 0.371891 0.187E+04 min_dr_div_cs log_rel_run_E_err -6.1978829387838301 rel_E_err 3.1554275833393684D-09 k, q, energy_removed_layers before adjustment is 880 0.97910001318239581 9.3723023042120210E+049 k, q, energy_removed_layers after adjustment is 887 0.97790554270931263 9.3854518596297273E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11628.119140625000 max vel inside fraction of cutoff 4172.4608234214047 max c/cs inside fraction of cutoff 4.9541537086229832 average v/vesc outside cutoff 1.8698437652845548 Kinetic plus potential energy outside cutoff 9.3854518596297273E+049 mass inside cutoff 887 50.587898390501543 relax counter 0 log max v [km/s]= 5.6211917455881766 check gamma integral 4.4303789725350998E-002 Warning: maximum velocity exceeds speed of light 1 0.4180240711E+11 0.1394378211E+01 Warning: maximum velocity exceeds speed of light 1 0.4180327892E+11 0.1394407291E+01 Warning: maximum velocity exceeds speed of light 1 0.4180432238E+11 0.1394442097E+01 Warning: maximum velocity exceeds speed of light 1 0.4180557063E+11 0.1394483734E+01 Warning: maximum velocity exceeds speed of light 1 0.4180657197E+11 0.1394517135E+01 Warning: maximum velocity exceeds speed of light 1 0.4180751190E+11 0.1394548488E+01 Warning: maximum velocity exceeds speed of light 1 0.4180839632E+11 0.1394577989E+01 Warning: maximum velocity exceeds speed of light 1 0.4180945478E+11 0.1394613295E+01 Warning: maximum velocity exceeds speed of light 1 0.4181072084E+11 0.1394655527E+01 Warning: maximum velocity exceeds speed of light 1 0.4181223423E+11 0.1394706008E+01 3440 8.919802 9990.781 -16.072269 2.939223 51.730864 0.000000 0.000000 0.000000 0.217143 -2.904078 3451 21 -7.4371E+00 8.919802 2.827129 -8.345018 8.059825 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624997 9 2.8747E+05 4.422843 6.607348 2.939223 -11.502573 -13.174115 49.075594 0.000002 0.000000 0.371891 0.187E+04 max increase log_rel_run_E_err -6.1867527886857330 rel_E_err 3.4166219365634679D-09 k, q, energy_removed_layers before adjustment is 881 0.97910001318239581 9.3743965905290881E+049 k, q, energy_removed_layers after adjustment is 888 0.97790554270931263 9.3875811543303883E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11636.210937500000 max vel inside fraction of cutoff 4033.3211613892008 max c/cs inside fraction of cutoff 4.8837987220683097 average v/vesc outside cutoff 1.8740302184726598 Kinetic plus potential energy outside cutoff 9.3875811543303883E+049 mass inside cutoff 888 50.587898390501543 relax counter 0 log max v [km/s]= 5.6213033746273924 check gamma integral 4.4653918512815721E-002 Warning: maximum velocity exceeds speed of light 1 0.4181404185E+11 0.1394766304E+01 Warning: maximum velocity exceeds speed of light 1 0.4181559841E+11 0.1394818225E+01 Warning: maximum velocity exceeds speed of light 1 0.4181706135E+11 0.1394867023E+01 Warning: maximum velocity exceeds speed of light 1 0.4181847147E+11 0.1394914060E+01 Warning: maximum velocity exceeds speed of light 1 0.4181981340E+11 0.1394958822E+01 Warning: maximum velocity exceeds speed of light 1 0.4182141688E+11 0.1395012308E+01 Warning: maximum velocity exceeds speed of light 1 0.4182333121E+11 0.1395076163E+01 Warning: maximum velocity exceeds speed of light 1 0.4182491403E+11 0.1395128961E+01 Warning: maximum velocity exceeds speed of light 1 0.4182636183E+11 0.1395177254E+01 Warning: maximum velocity exceeds speed of light 1 0.4182756797E+11 0.1395217486E+01 3450 8.903213 9922.004 -16.184661 2.887110 51.730864 0.000000 0.000000 0.000000 0.217143 -2.946801 3471 21 -7.5180E+00 8.903213 2.831749 -8.900039 7.780459 -99.000000 51.730864 0.000000 0.059838 0.782857 0.626388 9 2.8747E+05 4.375973 6.604589 2.887110 -12.892600 -13.183357 49.075594 0.000002 0.000000 0.371891 0.188E+04 min_dr_div_cs log_rel_run_E_err -6.1729039680066577 rel_E_err 2.8176498536810414D-09 save photos/x450 for model 3450 k, q, energy_removed_layers before adjustment is 881 0.97910001318239581 9.3775528484257906E+049 k, q, energy_removed_layers after adjustment is 888 0.97790554270931263 9.3907832893312115E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11648.160156250000 max vel inside fraction of cutoff 3886.1001157816099 max c/cs inside fraction of cutoff 4.8128002866571782 average v/vesc outside cutoff 1.8802036178592076 Kinetic plus potential energy outside cutoff 9.3907832893312115E+049 mass inside cutoff 888 50.587898390501543 relax counter 0 log max v [km/s]= 5.6214626135845487 check gamma integral 4.5152842735791385E-002 Warning: maximum velocity exceeds speed of light 1 0.4182854938E+11 0.1395250223E+01 Warning: maximum velocity exceeds speed of light 1 0.4182942434E+11 0.1395279408E+01 Warning: maximum velocity exceeds speed of light 1 0.4183024613E+11 0.1395306820E+01 Warning: maximum velocity exceeds speed of light 1 0.4183122960E+11 0.1395339625E+01 Warning: maximum velocity exceeds speed of light 1 0.4183240590E+11 0.1395378863E+01 Warning: maximum velocity exceeds speed of light 1 0.4183336914E+11 0.1395410992E+01 Warning: maximum velocity exceeds speed of light 1 0.4183426184E+11 0.1395440770E+01 Warning: maximum velocity exceeds speed of light 1 0.4183507964E+11 0.1395468049E+01 Warning: maximum velocity exceeds speed of light 1 0.4183584971E+11 0.1395493735E+01 Warning: maximum velocity exceeds speed of light 1 0.4183677138E+11 0.1395524479E+01 3460 8.892955 9879.974 -16.254870 2.855884 51.730864 0.000000 0.000000 0.000000 0.217143 -2.973198 3471 21 -7.6237E+00 8.892955 2.834589 -9.271727 7.604437 -99.000000 51.730864 0.000000 0.059838 0.782857 0.627279 9 2.8747E+05 4.347051 6.602896 2.855884 -13.778079 -13.189040 49.075594 0.000002 0.000000 0.371891 0.188E+04 max increase log_rel_run_E_err -6.1672685691693410 rel_E_err 2.4483734375025406D-09 k, q, energy_removed_layers before adjustment is 882 0.97910001318239581 9.3794141754553158E+049 k, q, energy_removed_layers after adjustment is 889 0.97790554270931263 9.3926700271506435E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11655.566406250000 max vel inside fraction of cutoff 3807.5687880395799 max c/cs inside fraction of cutoff 4.7873327094509586 average v/vesc outside cutoff 1.8840008616556354 Kinetic plus potential energy outside cutoff 9.3926700271506435E+049 mass inside cutoff 889 50.587898390501543 relax counter 0 log max v [km/s]= 5.6215581618448391 check gamma integral 4.5449582373616730E-002 Warning: maximum velocity exceeds speed of light 1 0.4183787392E+11 0.1395561256E+01 Warning: maximum velocity exceeds speed of light 1 0.4183876706E+11 0.1395591048E+01 Warning: maximum velocity exceeds speed of light 1 0.4183960417E+11 0.1395618971E+01 Warning: maximum velocity exceeds speed of light 1 0.4184042570E+11 0.1395646374E+01 Warning: maximum velocity exceeds speed of light 1 0.4184140872E+11 0.1395679164E+01 Warning: maximum velocity exceeds speed of light 1 0.4184258433E+11 0.1395718378E+01 Warning: maximum velocity exceeds speed of light 1 0.4184354503E+11 0.1395750424E+01 Warning: maximum velocity exceeds speed of light 1 0.4184442722E+11 0.1395779850E+01 Warning: maximum velocity exceeds speed of light 1 0.4184522687E+11 0.1395806524E+01 Warning: maximum velocity exceeds speed of light 1 0.4184618375E+11 0.1395838442E+01 3470 8.882255 9836.328 -16.328503 2.823882 51.730864 0.000000 0.000000 0.000000 0.217143 -3.000754 3470 21 -7.5956E+00 8.882255 2.837554 -9.665943 7.419018 -99.000000 51.730864 0.000000 0.059838 0.782857 0.628224 9 2.8747E+05 4.316914 6.601133 2.823882 -14.722789 -13.194970 49.075594 0.000002 0.000000 0.371891 0.189E+04 max increase log_rel_run_E_err -6.1601997345490629 rel_E_err 1.0140062160597386D-09 k, q, energy_removed_layers before adjustment is 882 0.97910001318239581 9.3813915319826529E+049 k, q, energy_removed_layers after adjustment is 889 0.97790554270931263 9.3946717009449074E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11663.345703125000 max vel inside fraction of cutoff 3688.2360280818225 max c/cs inside fraction of cutoff 4.7046136135057051 average v/vesc outside cutoff 1.8879909813283222 Kinetic plus potential energy outside cutoff 9.3946717009449074E+049 mass inside cutoff 889 50.587898390501543 relax counter 0 log max v [km/s]= 5.6216558577745745 check gamma integral 4.5749641857710813E-002 Warning: maximum velocity exceeds speed of light 1 0.4184732811E+11 0.1395876614E+01 Warning: maximum velocity exceeds speed of light 1 0.4184835310E+11 0.1395910804E+01 Warning: maximum velocity exceeds speed of light 1 0.4184934364E+11 0.1395943845E+01 Warning: maximum velocity exceeds speed of light 1 0.4185031028E+11 0.1395976088E+01 Warning: maximum velocity exceeds speed of light 1 0.4185146619E+11 0.1396014645E+01 Warning: maximum velocity exceeds speed of light 1 0.4185284747E+11 0.1396060720E+01 Warning: maximum velocity exceeds speed of light 1 0.4185394877E+11 0.1396097455E+01 Warning: maximum velocity exceeds speed of light 1 0.4185497893E+11 0.1396131818E+01 Warning: maximum velocity exceeds speed of light 1 0.4185596235E+11 0.1396164621E+01 Warning: maximum velocity exceeds speed of light 1 0.4185691142E+11 0.1396196278E+01 3480 8.869847 9785.696 -16.414166 2.787521 51.730864 0.000000 0.000000 0.000000 0.217143 -3.032759 3464 21 -7.5850E+00 8.869847 2.841011 -10.133952 7.202865 -99.000000 51.730864 0.000000 0.059838 0.782857 0.629338 8 2.8747E+05 4.281999 6.599082 2.787521 -15.845296 -13.201886 49.075594 0.000002 0.000000 0.371891 0.189E+04 min_dr_div_cs log_rel_run_E_err -6.1494963861534426 rel_E_err 2.6655833660439787D-09 k, q, energy_removed_layers before adjustment is 883 0.97891973813667665 9.3875411376791343E+049 k, q, energy_removed_layers after adjustment is 889 0.97790554270931263 9.3969765796982747E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11672.482421875000 max vel inside fraction of cutoff 3557.3217684722395 max c/cs inside fraction of cutoff 4.6531497803508177 average v/vesc outside cutoff 1.8926615988246049 Kinetic plus potential energy outside cutoff 9.3969765796982747E+049 mass inside cutoff 889 50.587898390501543 relax counter 0 log max v [km/s]= 5.6217671789857020 check gamma integral 4.6087180772270933E-002 Warning: maximum velocity exceeds speed of light 1 0.4185804626E+11 0.1396234133E+01 Warning: maximum velocity exceeds speed of light 1 0.4185940229E+11 0.1396279365E+01 Warning: maximum velocity exceeds speed of light 1 0.4186102121E+11 0.1396333366E+01 Warning: maximum velocity exceeds speed of light 1 0.4186248637E+11 0.1396382239E+01 Warning: maximum velocity exceeds speed of light 1 0.4186388261E+11 0.1396428813E+01 Warning: maximum velocity exceeds speed of light 1 0.4186522731E+11 0.1396473667E+01 Warning: maximum velocity exceeds speed of light 1 0.4186683253E+11 0.1396527211E+01 Warning: maximum velocity exceeds speed of light 1 0.4186874671E+11 0.1396591061E+01 Warning: maximum velocity exceeds speed of light 1 0.4187036710E+11 0.1396645112E+01 Warning: maximum velocity exceeds speed of light 1 0.4187184802E+11 0.1396694510E+01 3490 8.852476 9713.446 -16.535183 2.735753 51.730864 0.000000 0.000000 0.000000 0.217143 -3.077692 3458 21 -7.3708E+00 8.852476 2.845979 -10.851571 6.899482 -99.000000 51.730864 0.000000 0.059838 0.782857 0.630921 9 2.8747E+05 4.233157 6.596146 2.735753 -17.468803 -13.211826 49.075594 0.000002 0.000000 0.371891 0.190E+04 min_dr_div_cs log_rel_run_E_err -6.1330404720365976 rel_E_err 1.4459192431391585D-09 k, q, energy_removed_layers before adjustment is 884 0.97891973813667665 9.3907015224180821E+049 k, q, energy_removed_layers after adjustment is 890 0.97790554270931263 9.4001607080496988E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11685.740234375000 max vel inside fraction of cutoff 3366.3609339932286 max c/cs inside fraction of cutoff 4.5200950504722135 average v/vesc outside cutoff 1.8993935192998550 Kinetic plus potential energy outside cutoff 9.4001607080496988E+049 mass inside cutoff 890 50.587898390501543 relax counter 0 log max v [km/s]= 5.6219221289158208 check gamma integral 4.6547813659562697E-002 Warning: maximum velocity exceeds speed of light 1 0.4187324314E+11 0.1396741046E+01 Warning: maximum velocity exceeds speed of light 1 0.4187453176E+11 0.1396784030E+01 Warning: maximum velocity exceeds speed of light 1 0.4187573999E+11 0.1396824332E+01 Warning: maximum velocity exceeds speed of light 1 0.4187691435E+11 0.1396863505E+01 Warning: maximum velocity exceeds speed of light 1 0.4187831678E+11 0.1396910285E+01 Warning: maximum velocity exceeds speed of light 1 0.4187998991E+11 0.1396966094E+01 Warning: maximum velocity exceeds speed of light 1 0.4188142005E+11 0.1397013799E+01 Warning: maximum velocity exceeds speed of light 1 0.4188274399E+11 0.1397057960E+01 Warning: maximum velocity exceeds speed of light 1 0.4188400759E+11 0.1397100109E+01 Warning: maximum velocity exceeds speed of light 1 0.4188522280E+11 0.1397140645E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3500 8.837046 9646.903 -16.643823 2.692755 51.730864 0.000000 0.000000 0.000000 0.217143 -3.117666 3462 21 -7.4365E+00 8.837046 2.850594 -11.553554 6.632746 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632362 9 2.8747E+05 4.189840 6.593434 2.692755 -18.963660 -13.221057 49.075594 0.000002 0.000000 0.371891 0.190E+04 min_dr_div_cs log_rel_run_E_err -6.1224955391514406 rel_E_err 9.0263118947326022D-10 save LOGS/profile21.data for model 3500 save photos/x500 for model 3500 k, q, energy_removed_layers before adjustment is 885 0.97891973813667665 9.3935966178891306E+049 k, q, energy_removed_layers after adjustment is 891 0.97790554270931263 9.4030731070302384E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11698.187500000000 max vel inside fraction of cutoff 3222.4405039628573 max c/cs inside fraction of cutoff 4.4404368996622541 average v/vesc outside cutoff 1.9056783080823447 Kinetic plus potential energy outside cutoff 9.4030731070302384E+049 mass inside cutoff 891 50.587898390501543 relax counter 0 log max v [km/s]= 5.6220608299166006 check gamma integral 4.6950532849016680E-002 Warning: maximum velocity exceeds speed of light 1 0.4188667343E+11 0.1397189032E+01 Warning: maximum velocity exceeds speed of light 1 0.4188840323E+11 0.1397246732E+01 Warning: maximum velocity exceeds speed of light 1 0.4188988222E+11 0.1397296066E+01 Warning: maximum velocity exceeds speed of light 1 0.4189164541E+11 0.1397354880E+01 Warning: maximum velocity exceeds speed of light 1 0.4189374461E+11 0.1397424902E+01 Warning: maximum velocity exceeds speed of light 1 0.4189541336E+11 0.1397480565E+01 Warning: maximum velocity exceeds speed of light 1 0.4189684950E+11 0.1397528469E+01 Warning: maximum velocity exceeds speed of light 1 0.4189818208E+11 0.1397572920E+01 Warning: maximum velocity exceeds speed of light 1 0.4189945514E+11 0.1397615384E+01 Warning: maximum velocity exceeds speed of light 1 0.4190067624E+11 0.1397656116E+01 3510 8.819531 9567.477 -16.768336 2.645926 51.730864 0.000000 0.000000 0.000000 0.217143 -3.163163 3451 21 -7.4091E+00 8.819531 2.856152 -12.405284 6.339741 -99.000000 51.730864 0.000000 0.059838 0.782857 0.634027 9 2.8747E+05 4.140720 6.590187 2.645926 -20.722559 -13.232175 49.075594 0.000002 0.000000 0.371891 0.191E+04 min_dr_div_cs log_rel_run_E_err -6.1092731493899288 rel_E_err 7.7004953517461911D-10 k, q, energy_removed_layers before adjustment is 886 0.97891973813667665 9.3970293381056239E+049 k, q, energy_removed_layers after adjustment is 892 0.97790554270931263 9.4065213032776034E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11713.349609375000 max vel inside fraction of cutoff 3051.6436373505921 max c/cs inside fraction of cutoff 4.3400986870233096 average v/vesc outside cutoff 1.9132948804447683 Kinetic plus potential energy outside cutoff 9.4065213032776034E+049 mass inside cutoff 892 50.587898390501543 relax counter 0 log max v [km/s]= 5.6222210321416002 check gamma integral 4.7401855986545983E-002 Warning: maximum velocity exceeds speed of light 1 0.4190186511E+11 0.1397695772E+01 Warning: maximum velocity exceeds speed of light 1 0.4190328371E+11 0.1397743092E+01 Warning: maximum velocity exceeds speed of light 1 0.4190497448E+11 0.1397799490E+01 Warning: maximum velocity exceeds speed of light 1 0.4190637635E+11 0.1397846251E+01 Warning: maximum velocity exceeds speed of light 1 0.4190764299E+11 0.1397888501E+01 Warning: maximum velocity exceeds speed of light 1 0.4190882766E+11 0.1397928018E+01 Warning: maximum velocity exceeds speed of light 1 0.4191024091E+11 0.1397975159E+01 Warning: maximum velocity exceeds speed of light 1 0.4191192484E+11 0.1398031329E+01 Warning: maximum velocity exceeds speed of light 1 0.4191331706E+11 0.1398077768E+01 Warning: maximum velocity exceeds speed of light 1 0.4191454255E+11 0.1398118646E+01 3520 8.804222 9493.591 -16.878279 2.605020 51.730864 0.000000 0.000000 0.000000 0.217143 -3.202991 3447 21 -7.3828E+00 8.804222 2.861371 -13.199463 6.098373 -99.000000 51.730864 0.000000 0.059838 0.782857 0.635516 9 2.8747E+05 4.097849 6.587158 2.605020 -22.316210 -13.242616 49.075594 0.000002 0.000000 0.371891 0.192E+04 min_dr_div_cs log_rel_run_E_err -6.0977478092189399 rel_E_err 1.0158736433226671D-09 k, q, energy_removed_layers before adjustment is 886 0.97891973813667665 9.4002434946672623E+049 k, q, energy_removed_layers after adjustment is 892 0.97790554270931263 9.4097455446434853E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11727.757812500000 max vel inside fraction of cutoff 2907.3625311187861 max c/cs inside fraction of cutoff 4.2612667071726582 average v/vesc outside cutoff 1.9205050222606748 Kinetic plus potential energy outside cutoff 9.4097455446434853E+049 mass inside cutoff 892 50.587898390501543 relax counter 0 log max v [km/s]= 5.6223647307022171 check gamma integral 4.7793977163252864E-002 Warning: maximum velocity exceeds speed of light 1 0.4191570766E+11 0.1398157510E+01 Warning: maximum velocity exceeds speed of light 1 0.4191709734E+11 0.1398203865E+01 Warning: maximum velocity exceeds speed of light 1 0.4191875282E+11 0.1398259086E+01 Warning: maximum velocity exceeds speed of light 1 0.4192015799E+11 0.1398305957E+01 Warning: maximum velocity exceeds speed of light 1 0.4192147321E+11 0.1398349828E+01 Warning: maximum velocity exceeds speed of light 1 0.4192269343E+11 0.1398390530E+01 Warning: maximum velocity exceeds speed of light 1 0.4192414796E+11 0.1398439048E+01 Warning: maximum velocity exceeds speed of light 1 0.4192587942E+11 0.1398496804E+01 Warning: maximum velocity exceeds speed of light 1 0.4192733759E+11 0.1398545443E+01 Warning: maximum velocity exceeds speed of light 1 0.4192866969E+11 0.1398589877E+01 3530 8.789089 9415.301 -16.987981 2.564591 51.730864 0.000000 0.000000 0.000000 0.217143 -3.242433 3439 21 -7.3188E+00 8.789089 2.866954 -14.056271 5.878791 -99.000000 51.730864 0.000000 0.059838 0.782857 0.637014 9 2.8747E+05 4.055519 6.583938 2.564591 -23.944932 -13.253784 49.075594 0.000002 0.000000 0.371891 0.193E+04 min_dr_div_cs log_rel_run_E_err -6.0845035517058372 rel_E_err 3.4191292029663939D-09 k, q, energy_removed_layers before adjustment is 888 0.97891973813667665 9.4034943018071055E+049 k, q, energy_removed_layers after adjustment is 894 0.97790554270931263 9.4130032881006494E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11743.363281250000 max vel inside fraction of cutoff 2745.1985688762261 max c/cs inside fraction of cutoff 4.0999802668495322 average v/vesc outside cutoff 1.9282288434597654 Kinetic plus potential energy outside cutoff 9.4130032881006494E+049 mass inside cutoff 894 50.587898390501543 relax counter 0 log max v [km/s]= 5.6225110833352803 check gamma integral 4.8180246728954088E-002 Warning: maximum velocity exceeds speed of light 1 0.4192994450E+11 0.1398632400E+01 Warning: maximum velocity exceeds speed of light 1 0.4193119350E+11 0.1398674062E+01 Warning: maximum velocity exceeds speed of light 1 0.4193239419E+11 0.1398714113E+01 Warning: maximum velocity exceeds speed of light 1 0.4193354074E+11 0.1398752357E+01 Warning: maximum velocity exceeds speed of light 1 0.4193490727E+11 0.1398797940E+01 Warning: maximum velocity exceeds speed of light 1 0.4193653372E+11 0.1398852193E+01 Warning: maximum velocity exceeds speed of light 1 0.4193846625E+11 0.1398916655E+01 Warning: maximum velocity exceeds speed of light 1 0.4194075773E+11 0.1398993091E+01 Warning: maximum velocity exceeds speed of light 1 0.4194272629E+11 0.1399058754E+01 Warning: maximum velocity exceeds speed of light 1 0.4194455806E+11 0.1399119856E+01 3540 8.772683 9322.855 -17.107945 2.520757 51.730864 0.000000 0.000000 0.000000 0.217143 -3.285295 3415 21 -7.1453E+00 8.772683 2.873617 -15.107549 5.665849 -99.000000 51.730864 0.000000 0.059838 0.782857 0.638663 9 2.8747E+05 4.009671 6.580123 2.520757 -25.772652 -13.267114 49.075594 0.000002 0.000000 0.371891 0.194E+04 lgRho_cntr log_rel_run_E_err -6.0700554261208373 rel_E_err 3.3243051783014120D-09 k, q, energy_removed_layers before adjustment is 889 0.97891973813667665 9.4073588077300725E+049 k, q, energy_removed_layers after adjustment is 895 0.97790554270931263 9.4168722134131611E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11762.242187500000 max vel inside fraction of cutoff 2539.5030473162719 max c/cs inside fraction of cutoff 3.8371244976294996 average v/vesc outside cutoff 1.9375458477163263 Kinetic plus potential energy outside cutoff 9.4168722134131611E+049 mass inside cutoff 895 50.587898390501543 relax counter 0 log max v [km/s]= 5.6226756228672805 check gamma integral 4.8597243623138199E-002 Warning: maximum velocity exceeds speed of light 1 0.4194630503E+11 0.1399178128E+01 Warning: maximum velocity exceeds speed of light 1 0.4194798901E+11 0.1399234300E+01 Warning: maximum velocity exceeds speed of light 1 0.4194964332E+11 0.1399289482E+01 Warning: maximum velocity exceeds speed of light 1 0.4195160624E+11 0.1399354958E+01 Warning: maximum velocity exceeds speed of light 1 0.4195392986E+11 0.1399432465E+01 Warning: maximum velocity exceeds speed of light 1 0.4195591413E+11 0.1399498654E+01 Warning: maximum velocity exceeds speed of light 1 0.4195779104E+11 0.1399561260E+01 Warning: maximum velocity exceeds speed of light 1 0.4195956243E+11 0.1399620348E+01 Warning: maximum velocity exceeds speed of light 1 0.4196166003E+11 0.1399690316E+01 Warning: maximum velocity exceeds speed of light 1 0.4196413696E+11 0.1399772938E+01 3550 8.753532 9200.870 -17.249504 2.469578 51.730864 0.000000 0.000000 0.000000 0.217143 -3.335457 3394 21 -6.9636E+00 8.753532 2.882533 -16.554314 5.449598 -99.000000 51.730864 0.000000 0.059838 0.782857 0.640622 10 2.8747E+05 3.956206 6.575075 2.469578 -27.991329 -13.284950 49.075594 0.000002 0.000000 0.371891 0.195E+04 lgRho_cntr log_rel_run_E_err -6.0546243970935940 rel_E_err 8.9890973404274897D-10 save photos/x550 for model 3550 k, q, energy_removed_layers before adjustment is 889 0.97891973813667665 9.4124708379273789E+049 k, q, energy_removed_layers after adjustment is 895 0.97790554270931263 9.4219862570191541E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11787.951171875000 max vel inside fraction of cutoff 2304.3941705772040 max c/cs inside fraction of cutoff 3.5536667634927053 average v/vesc outside cutoff 1.9501443171050119 Kinetic plus potential energy outside cutoff 9.4219862570191541E+049 mass inside cutoff 895 50.587898390501543 relax counter 0 log max v [km/s]= 5.6228782958098451 check gamma integral 4.9084501247263414E-002 Warning: maximum velocity exceeds speed of light 1 0.4196625650E+11 0.1399843638E+01 Warning: maximum velocity exceeds speed of light 1 0.4196793295E+11 0.1399899558E+01 Warning: maximum velocity exceeds speed of light 1 0.4196926188E+11 0.1399943887E+01 Warning: maximum velocity exceeds speed of light 1 0.4197083906E+11 0.1399996496E+01 Warning: maximum velocity exceeds speed of light 1 0.4197270653E+11 0.1400058788E+01 Warning: maximum velocity exceeds speed of light 1 0.4197491148E+11 0.1400132337E+01 Warning: maximum velocity exceeds speed of light 1 0.4197665251E+11 0.1400190411E+01 Warning: maximum velocity exceeds speed of light 1 0.4197803071E+11 0.1400236383E+01 Warning: maximum velocity exceeds speed of light 1 0.4197912396E+11 0.1400272850E+01 Warning: maximum velocity exceeds speed of light 1 0.4198000466E+11 0.1400302227E+01 3560 8.739007 9093.622 -17.357948 2.430776 51.730864 0.000000 0.000000 0.000000 0.217143 -3.373538 3386 21 -7.3630E+00 8.739007 2.890492 -17.865304 5.305055 -99.000000 51.730864 0.000000 0.059838 0.782857 0.642141 8 2.8747E+05 3.915717 6.570626 2.430776 -29.737589 -13.300872 49.075594 0.000002 0.000000 0.371891 0.196E+04 min_dr_div_cs log_rel_run_E_err -6.0467478978099765 rel_E_err 3.0971917004634286D-12 k, q, energy_removed_layers before adjustment is 889 0.97891973813667665 9.4168942813967344E+049 k, q, energy_removed_layers after adjustment is 895 0.97790554270931263 9.4264105914945221E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11811.337890625000 max vel inside fraction of cutoff 2166.7719737511816 max c/cs inside fraction of cutoff 3.4387114871549227 average v/vesc outside cutoff 1.9615028676999058 Kinetic plus potential energy outside cutoff 9.4264105914945221E+049 mass inside cutoff 895 50.587898390501543 relax counter 0 log max v [km/s]= 5.6230424824516287 check gamma integral 4.9455884274341222E-002 Warning: maximum velocity exceeds speed of light 1 0.4198105272E+11 0.1400337187E+01 Warning: maximum velocity exceeds speed of light 1 0.4198229777E+11 0.1400378717E+01 Warning: maximum velocity exceeds speed of light 1 0.4198377375E+11 0.1400427950E+01 Warning: maximum velocity exceeds speed of light 1 0.4198494300E+11 0.1400466952E+01 Warning: maximum velocity exceeds speed of light 1 0.4198594671E+11 0.1400500433E+01 Warning: maximum velocity exceeds speed of light 1 0.4198688636E+11 0.1400531776E+01 Warning: maximum velocity exceeds speed of light 1 0.4198800296E+11 0.1400569022E+01 Warning: maximum velocity exceeds speed of light 1 0.4198932712E+11 0.1400613191E+01 Warning: maximum velocity exceeds speed of light 1 0.4199045227E+11 0.1400650722E+01 Warning: maximum velocity exceeds speed of light 1 0.4199141184E+11 0.1400682730E+01 3570 8.729230 9010.423 -17.431336 2.404676 51.730864 0.000000 0.000000 0.000000 0.217143 -3.399169 3370 21 -7.2833E+00 8.729230 2.896748 -18.862583 5.215117 -99.000000 51.730864 0.000000 0.059838 0.782857 0.643184 8 2.8747E+05 3.888502 6.567171 2.404676 -30.944597 -13.313387 49.075594 0.000002 0.000000 0.371891 0.197E+04 min_dr_div_cs log_rel_run_E_err -6.0423885913404414 rel_E_err 5.9771469126200537D-10 k, q, energy_removed_layers before adjustment is 890 0.97891973813667665 9.4202559748571681E+049 k, q, energy_removed_layers after adjustment is 896 0.97790554270931263 9.4297765484895521E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11830.019531250000 max vel inside fraction of cutoff 2029.6530430437942 max c/cs inside fraction of cutoff 3.2994214256978780 average v/vesc outside cutoff 1.9704920535610078 Kinetic plus potential energy outside cutoff 9.4297765484895521E+049 mass inside cutoff 896 50.587898390501543 relax counter 0 log max v [km/s]= 5.6231604767968211 check gamma integral 4.9706601347452757E-002 Warning: maximum velocity exceeds speed of light 1 0.4199223371E+11 0.1400710144E+01 Warning: maximum velocity exceeds speed of light 1 0.4199300651E+11 0.1400735922E+01 Warning: maximum velocity exceeds speed of light 1 0.4199376318E+11 0.1400761162E+01 Warning: maximum velocity exceeds speed of light 1 0.4199466328E+11 0.1400791186E+01 Warning: maximum velocity exceeds speed of light 1 0.4199573207E+11 0.1400826837E+01 Warning: maximum velocity exceeds speed of light 1 0.4199657986E+11 0.1400855116E+01 Warning: maximum velocity exceeds speed of light 1 0.4199731880E+11 0.1400879764E+01 Warning: maximum velocity exceeds speed of light 1 0.4199802261E+11 0.1400903241E+01 Warning: maximum velocity exceeds speed of light 1 0.4199869879E+11 0.1400925796E+01 Warning: maximum velocity exceeds speed of light 1 0.4199935027E+11 0.1400947527E+01 3580 8.722867 8948.660 -17.479289 2.387695 51.730864 0.000000 0.000000 0.000000 0.217143 -3.415850 3365 21 -7.4173E+00 8.722867 2.901442 -19.561210 5.158979 -99.000000 51.730864 0.000000 0.059838 0.782857 0.643872 7 2.8747E+05 3.870804 6.564610 2.387695 -31.744209 -13.322777 49.075594 0.000002 0.000000 0.371891 0.197E+04 min_dr_div_cs log_rel_run_E_err -6.0409096763996448 rel_E_err 9.7215602803446891D-10 k, q, energy_removed_layers before adjustment is 889 0.97891973813667643 9.4227471694742093E+049 k, q, energy_removed_layers after adjustment is 895 0.97790554270931240 9.4322758418724127E+049 Layers above q= 0.97790554270931240 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11844.210937500000 max vel inside fraction of cutoff 1958.1398687608489 max c/cs inside fraction of cutoff 3.2545146780050667 average v/vesc outside cutoff 1.9772907090980858 Kinetic plus potential energy outside cutoff 9.4322758418724127E+049 mass inside cutoff 895 50.587898390501522 relax counter 0 log max v [km/s]= 5.6232425719007422 check gamma integral 4.9872051646193807E-002 Warning: maximum velocity exceeds speed of light 1 0.4199998049E+11 0.1400968549E+01 Warning: maximum velocity exceeds speed of light 1 0.4200057139E+11 0.1400988259E+01 Warning: maximum velocity exceeds speed of light 1 0.4200113507E+11 0.1401007062E+01 Warning: maximum velocity exceeds speed of light 1 0.4200168026E+11 0.1401025247E+01 Warning: maximum velocity exceeds speed of light 1 0.4200232979E+11 0.1401046913E+01 Warning: maximum velocity exceeds speed of light 1 0.4200310247E+11 0.1401072687E+01 Warning: maximum velocity exceeds speed of light 1 0.4200402000E+11 0.1401103293E+01 Warning: maximum velocity exceeds speed of light 1 0.4200510713E+11 0.1401139555E+01 Warning: maximum velocity exceeds speed of light 1 0.4200639176E+11 0.1401182406E+01 Warning: maximum velocity exceeds speed of light 1 0.4200790475E+11 0.1401232874E+01 3590 8.716577 8877.383 -17.527021 2.370906 51.730864 0.000000 0.000000 0.000000 0.217143 -3.432352 3364 21 -7.0086E+00 8.716577 2.906912 -20.303462 5.104677 -99.000000 51.730864 0.000000 0.059838 0.782857 0.644556 8 2.8747E+05 3.853316 6.561658 2.370906 -32.546091 -13.333720 49.075594 0.000002 0.000000 0.371891 0.198E+04 min_dr_div_cs log_rel_run_E_err -6.0372175914939508 rel_E_err 3.5500172263274955D-09 k, q, energy_removed_layers before adjustment is 891 0.97873698964755174 9.4288036184980824E+049 k, q, energy_removed_layers after adjustment is 896 0.97790554270931240 9.4350649806426108E+049 Layers above q= 0.97790554270931240 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11860.943359375000 max vel inside fraction of cutoff 1837.4805183562612 max c/cs inside fraction of cutoff 3.1026020026728149 average v/vesc outside cutoff 1.9852524740834296 Kinetic plus potential energy outside cutoff 9.4350649806426108E+049 mass inside cutoff 896 50.587898390501522 relax counter 0 log max v [km/s]= 5.6233310204979343 check gamma integral 5.0040235096719794E-002 Warning: maximum velocity exceeds speed of light 1 0.4200923572E+11 0.1401277270E+01 Warning: maximum velocity exceeds speed of light 1 0.4201031855E+11 0.1401313390E+01 Warning: maximum velocity exceeds speed of light 1 0.4201117512E+11 0.1401341962E+01 Warning: maximum velocity exceeds speed of light 1 0.4201193773E+11 0.1401367399E+01 Warning: maximum velocity exceeds speed of light 1 0.4201265274E+11 0.1401391250E+01 Warning: maximum velocity exceeds speed of light 1 0.4201330006E+11 0.1401412842E+01 Warning: maximum velocity exceeds speed of light 1 0.4201388290E+11 0.1401432283E+01 Warning: maximum velocity exceeds speed of light 1 0.4201457534E+11 0.1401455381E+01 Warning: maximum velocity exceeds speed of light 1 0.4201539629E+11 0.1401482765E+01 Warning: maximum velocity exceeds speed of light 1 0.4201636710E+11 0.1401515148E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3600 8.711058 8800.745 -17.569372 2.356174 51.730864 0.000000 0.000000 0.000000 0.217143 -3.446834 3361 21 -7.1507E+00 8.711058 2.912860 -21.026184 5.057524 -99.000000 51.730864 0.000000 0.059838 0.782857 0.645160 7 2.8747E+05 3.837980 6.558492 2.356174 -33.259431 -13.345618 49.075594 0.000002 0.000000 0.371891 0.199E+04 max increase log_rel_run_E_err -6.0347255190067699 rel_E_err 1.2250582050078781D-11 save LOGS/profile22.data for model 3600 save photos/x600 for model 3600 k, q, energy_removed_layers before adjustment is 890 0.97873698964755174 9.4318330167002357E+049 k, q, energy_removed_layers after adjustment is 895 0.97790554270931240 9.4381229617332542E+049 Layers above q= 0.97790554270931240 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11879.375000000000 max vel inside fraction of cutoff 1743.0999961948221 max c/cs inside fraction of cutoff 3.0255481651097593 average v/vesc outside cutoff 1.9939820446239891 Kinetic plus potential energy outside cutoff 9.4381229617332542E+049 mass inside cutoff 895 50.587898390501522 relax counter 0 log max v [km/s]= 5.6234184988829394 check gamma integral 5.0195190664946140E-002 Warning: maximum velocity exceeds speed of light 1 0.4201751153E+11 0.1401553322E+01 Warning: maximum velocity exceeds speed of light 1 0.4201885542E+11 0.1401598149E+01 Warning: maximum velocity exceeds speed of light 1 0.4202002020E+11 0.1401637002E+01 Warning: maximum velocity exceeds speed of light 1 0.4202110769E+11 0.1401673277E+01 Warning: maximum velocity exceeds speed of light 1 0.4202214521E+11 0.1401707885E+01 Warning: maximum velocity exceeds speed of light 1 0.4202314544E+11 0.1401741249E+01 Warning: maximum velocity exceeds speed of light 1 0.4202410216E+11 0.1401773161E+01 Warning: maximum velocity exceeds speed of light 1 0.4202490536E+11 0.1401799953E+01 Warning: maximum velocity exceeds speed of light 1 0.4202555109E+11 0.1401821493E+01 Warning: maximum velocity exceeds speed of light 1 0.4202613413E+11 0.1401840941E+01 3610 8.705662 8701.216 -17.611059 2.341770 51.730864 0.000000 0.000000 0.000000 0.217143 -3.460999 3378 21 -7.2967E+00 8.705662 2.920682 -21.882050 5.011966 -99.000000 51.730864 0.000000 0.059838 0.782857 0.645754 7 2.8747E+05 3.822993 6.554378 2.341770 -33.965592 -13.361266 49.075594 0.000002 0.000000 0.371891 0.200E+04 min_dr_div_cs log_rel_run_E_err -6.0309947611275261 rel_E_err 2.7365086148549877D-12 k, q, energy_removed_layers before adjustment is 892 0.97873698964755207 9.4355802273429448E+049 k, q, energy_removed_layers after adjustment is 897 0.97790554270931274 9.4419225672359457E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11903.994140625000 max vel inside fraction of cutoff 1721.8087716199182 max c/cs inside fraction of cutoff 2.9034557442612998 average v/vesc outside cutoff 2.0055351763821458 Kinetic plus potential energy outside cutoff 9.4419225672359457E+049 mass inside cutoff 897 50.587898390501543 relax counter 0 log max v [km/s]= 5.6235194422801369 check gamma integral 5.0354841956208540E-002 Warning: maximum velocity exceeds speed of light 1 0.4202668923E+11 0.1401859457E+01 Warning: maximum velocity exceeds speed of light 1 0.4202722723E+11 0.1401877402E+01 Warning: maximum velocity exceeds speed of light 1 0.4202774556E+11 0.1401894692E+01 Warning: maximum velocity exceeds speed of light 1 0.4202825071E+11 0.1401911542E+01 Warning: maximum velocity exceeds speed of light 1 0.4202884867E+11 0.1401931488E+01 Warning: maximum velocity exceeds speed of light 1 0.4202955443E+11 0.1401955030E+01 Warning: maximum velocity exceeds speed of light 1 0.4203017096E+11 0.1401975595E+01 Warning: maximum velocity exceeds speed of light 1 0.4203075169E+11 0.1401994966E+01 Warning: maximum velocity exceeds speed of light 1 0.4203131793E+11 0.1402013853E+01 Warning: maximum velocity exceeds speed of light 1 0.4203198564E+11 0.1402036126E+01 3620 8.702997 8633.468 -17.631476 2.334661 51.730864 0.000000 0.000000 0.000000 0.217143 -3.467993 3371 21 -7.1783E+00 8.702997 2.926070 -22.431538 4.990013 -99.000000 51.730864 0.000000 0.059838 0.782857 0.646050 7 2.8747E+05 3.815595 6.551575 2.334661 -34.317111 -13.372044 49.075594 0.000002 0.000000 0.371891 0.200E+04 max increase log_rel_run_E_err -6.0268729835364416 rel_E_err 2.4092845469894529D-12 k, q, energy_removed_layers before adjustment is 891 0.97873698964755207 9.4381888578288883E+049 k, q, energy_removed_layers after adjustment is 896 0.97790554270931274 9.4445745563724856E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11921.208984375000 max vel inside fraction of cutoff 1755.9958586002315 max c/cs inside fraction of cutoff 2.8142204957167780 average v/vesc outside cutoff 2.0135733186957037 Kinetic plus potential energy outside cutoff 9.4445745563724856E+049 mass inside cutoff 896 50.587898390501543 relax counter 0 log max v [km/s]= 5.6235799070457979 check gamma integral 5.0436497270624575E-002 Warning: maximum velocity exceeds speed of light 1 0.4203276999E+11 0.1402062289E+01 Warning: maximum velocity exceeds speed of light 1 0.4203339172E+11 0.1402083028E+01 Warning: maximum velocity exceeds speed of light 1 0.4203395084E+11 0.1402101678E+01 Warning: maximum velocity exceeds speed of light 1 0.4203460870E+11 0.1402123622E+01 Warning: maximum velocity exceeds speed of light 1 0.4203537935E+11 0.1402149328E+01 Warning: maximum velocity exceeds speed of light 1 0.4203599712E+11 0.1402169934E+01 Warning: maximum velocity exceeds speed of light 1 0.4203654323E+11 0.1402188151E+01 Warning: maximum velocity exceeds speed of light 1 0.4203706429E+11 0.1402205532E+01 Warning: maximum velocity exceeds speed of light 1 0.4203767592E+11 0.1402225933E+01 Warning: maximum velocity exceeds speed of light 1 0.4203839028E+11 0.1402249762E+01 3630 8.700918 8547.625 -17.647244 2.329120 51.730864 0.000000 0.000000 0.000000 0.217143 -3.473449 3363 21 -7.0602E+00 8.700918 2.932974 -23.099682 4.973251 -99.000000 51.730864 0.000000 0.059838 0.782857 0.646281 7 2.8747E+05 3.809825 6.548023 2.329120 -34.592460 -13.385854 49.075596 0.000002 0.000000 0.371891 0.201E+04 min_dr_div_cs log_rel_run_E_err -6.0242928135043226 rel_E_err 2.6618389333808224D-12 k, q, energy_removed_layers before adjustment is 892 0.97873698964755207 9.4414542119767459E+049 k, q, energy_removed_layers after adjustment is 897 0.97790554270931274 9.4479007955106232E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11943.576171875000 max vel inside fraction of cutoff 1756.1805066101581 max c/cs inside fraction of cutoff 2.6897909999816645 average v/vesc outside cutoff 2.0239509747792455 Kinetic plus potential energy outside cutoff 9.4479007955106232E+049 mass inside cutoff 897 50.587898390501543 relax counter 0 log max v [km/s]= 5.6236460778189956 check gamma integral 5.0506758483715254E-002 Warning: maximum velocity exceeds speed of light 1 0.4203895274E+11 0.1402268524E+01 Warning: maximum velocity exceeds speed of light 1 0.4203946084E+11 0.1402285472E+01 Warning: maximum velocity exceeds speed of light 1 0.4203995067E+11 0.1402301811E+01 Warning: maximum velocity exceeds speed of light 1 0.4204052362E+11 0.1402320922E+01 Warning: maximum velocity exceeds speed of light 1 0.4204118988E+11 0.1402343146E+01 Warning: maximum velocity exceeds speed of light 1 0.4204170932E+11 0.1402360473E+01 Warning: maximum velocity exceeds speed of light 1 0.4204216804E+11 0.1402375774E+01 Warning: maximum velocity exceeds speed of light 1 0.4204259981E+11 0.1402390177E+01 Warning: maximum velocity exceeds speed of light 1 0.4204310329E+11 0.1402406971E+01 Warning: maximum velocity exceeds speed of light 1 0.4204368647E+11 0.1402426424E+01 3640 8.700485 8460.722 -17.650584 2.327965 51.730864 0.000000 0.000000 0.000000 0.217143 -3.474586 3351 21 -7.0362E+00 8.700485 2.940053 -23.744886 4.969629 -99.000000 51.730864 0.000000 0.059838 0.782857 0.646330 6 2.8747E+05 3.808623 6.544430 2.327965 -34.650179 -13.400016 49.075596 0.000002 0.000000 0.371891 0.202E+04 min_dr_div_cs log_rel_run_E_err -6.0209017475022009 rel_E_err 2.9675129666002772D-12 k, q, energy_removed_layers before adjustment is 891 0.97873698964755207 9.4447174813388824E+049 k, q, energy_removed_layers after adjustment is 896 0.97790554270931274 9.4512285297763964E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -11966.882812500000 max vel inside fraction of cutoff 1762.2866487736601 max c/cs inside fraction of cutoff 2.6683440318592972 average v/vesc outside cutoff 2.0346843732113040 Kinetic plus potential energy outside cutoff 9.4512285297763964E+049 mass inside cutoff 896 50.587898390501543 relax counter 0 log max v [km/s]= 5.6237007888171044 check gamma integral 5.0539138408055191E-002 Warning: maximum velocity exceeds speed of light 1 0.4204416987E+11 0.1402442548E+01 Warning: maximum velocity exceeds speed of light 1 0.4204472805E+11 0.1402461167E+01 Warning: maximum velocity exceeds speed of light 1 0.4204536651E+11 0.1402482464E+01 Warning: maximum velocity exceeds speed of light 1 0.4204608781E+11 0.1402506524E+01 Warning: maximum velocity exceeds speed of light 1 0.4204667713E+11 0.1402526181E+01 Warning: maximum velocity exceeds speed of light 1 0.4204719326E+11 0.1402543398E+01 Warning: maximum velocity exceeds speed of light 1 0.4204767303E+11 0.1402559401E+01 Warning: maximum velocity exceeds speed of light 1 0.4204811718E+11 0.1402574216E+01 Warning: maximum velocity exceeds speed of light 1 0.4204851672E+11 0.1402587543E+01 Warning: maximum velocity exceeds speed of light 1 0.4204887745E+11 0.1402599576E+01 3650 8.702894 8341.182 -17.632530 2.334384 51.730864 0.000000 0.000000 0.000000 0.217143 -3.468270 3348 21 -7.0231E+00 8.702894 2.949948 -24.568274 4.988397 -99.000000 51.730864 0.000000 0.059838 0.782857 0.646060 6 2.8747E+05 3.815306 6.539501 2.334384 -34.331463 -13.419811 49.075596 0.000002 0.000000 0.371891 0.203E+04 min_dr_div_cs log_rel_run_E_err -6.0198116124466701 rel_E_err 2.9529570534868388D-12 save photos/x650 for model 3650 k, q, energy_removed_layers before adjustment is 894 0.97873698964755207 9.4490968751678555E+049 k, q, energy_removed_layers after adjustment is 899 0.97790554270931274 9.4556939369555221E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12000.097656250000 max vel inside fraction of cutoff 1738.7408538883110 max c/cs inside fraction of cutoff 2.6372707758340144 average v/vesc outside cutoff 2.0498294280454794 Kinetic plus potential energy outside cutoff 9.4556939369555221E+049 mass inside cutoff 899 50.587898390501543 relax counter 0 log max v [km/s]= 5.6237544062112867 check gamma integral 5.0515904904944932E-002 Warning: maximum velocity exceeds speed of light 1 0.4204921336E+11 0.1402610781E+01 Warning: maximum velocity exceeds speed of light 1 0.4204952809E+11 0.1402621279E+01 Warning: maximum velocity exceeds speed of light 1 0.4204982174E+11 0.1402631074E+01 Warning: maximum velocity exceeds speed of light 1 0.4205014513E+11 0.1402641861E+01 Warning: maximum velocity exceeds speed of light 1 0.4205049161E+11 0.1402653419E+01 Warning: maximum velocity exceeds speed of light 1 0.4205075452E+11 0.1402662188E+01 Warning: maximum velocity exceeds speed of light 1 0.4205097472E+11 0.1402669533E+01 Warning: maximum velocity exceeds speed of light 1 0.4205116705E+11 0.1402675949E+01 Warning: maximum velocity exceeds speed of light 1 0.4205133263E+11 0.1402681472E+01 Warning: maximum velocity exceeds speed of light 1 0.4205147017E+11 0.1402686060E+01 3660 8.708390 8226.093 -17.590858 2.349031 51.730864 0.000000 0.000000 0.000000 0.217143 -3.453876 3347 21 -7.0011E+00 8.708390 2.959631 -25.264657 5.032759 -99.000000 51.730864 0.000000 0.059838 0.782857 0.645445 5 2.8747E+05 3.830552 6.534731 2.349031 -33.609511 -13.439182 49.075596 0.000002 0.000000 0.371891 0.204E+04 min_dr_div_cs log_rel_run_E_err -6.0136759934962321 rel_E_err 2.7046796331166598D-09 k, q, energy_removed_layers before adjustment is 896 0.97873698964755229 9.4532615894553235E+049 k, q, energy_removed_layers after adjustment is 901 0.97790554270931296 9.4599318178429107E+049 Layers above q= 0.97790554270931296 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12033.339843750000 max vel inside fraction of cutoff 1740.8657630719667 max c/cs inside fraction of cutoff 2.6056876697446776 average v/vesc outside cutoff 2.0648320472126209 Kinetic plus potential energy outside cutoff 9.4599318178429107E+049 mass inside cutoff 901 50.587898390501564 relax counter 0 log max v [km/s]= 5.6237811838530769 check gamma integral 5.0414759341205692E-002 Warning: maximum velocity exceeds speed of light 1 0.4205158251E+11 0.1402689807E+01 Warning: maximum velocity exceeds speed of light 1 0.4205167317E+11 0.1402692831E+01 Warning: maximum velocity exceeds speed of light 1 0.4205175222E+11 0.1402695468E+01 Warning: maximum velocity exceeds speed of light 1 0.4205180449E+11 0.1402697212E+01 Warning: maximum velocity exceeds speed of light 1 0.4205181828E+11 0.1402697672E+01 Warning: maximum velocity exceeds speed of light 1 0.4205180413E+11 0.1402697200E+01 Warning: maximum velocity exceeds speed of light 1 0.4205176331E+11 0.1402695838E+01 Warning: maximum velocity exceeds speed of light 1 0.4205169735E+11 0.1402693638E+01 Warning: maximum velocity exceeds speed of light 1 0.4205160971E+11 0.1402690714E+01 Warning: maximum velocity exceeds speed of light 1 0.4205150118E+11 0.1402687094E+01 3670 8.717073 8110.253 -17.524931 2.372173 51.730864 0.000000 0.000000 0.000000 0.217143 -3.431163 3361 21 -6.9888E+00 8.717073 2.969528 -25.823859 5.105195 -99.000000 51.730864 0.000000 0.059838 0.782857 0.644477 5 2.8747E+05 3.854647 6.529886 2.372173 -32.485902 -13.458978 49.075596 0.000002 0.000000 0.371891 0.206E+04 min_dr_div_cs log_rel_run_E_err -6.0076558979976387 rel_E_err 2.3820813896891527D-10 k, q, energy_removed_layers before adjustment is 895 0.97873698964755229 9.4573826763264232E+049 k, q, energy_removed_layers after adjustment is 900 0.97790554270931296 9.4641125675085118E+049 Layers above q= 0.97790554270931296 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12068.089843750000 max vel inside fraction of cutoff 1750.2189126374797 max c/cs inside fraction of cutoff 2.5722490500578408 average v/vesc outside cutoff 2.0803610768241914 Kinetic plus potential energy outside cutoff 9.4641125675085118E+049 mass inside cutoff 900 50.587898390501564 relax counter 0 log max v [km/s]= 5.6237815040854535 check gamma integral 5.0227917735998003E-002 Warning: maximum velocity exceeds speed of light 1 0.4205133825E+11 0.1402681659E+01 Warning: maximum velocity exceeds speed of light 1 0.4205109579E+11 0.1402673572E+01 Warning: maximum velocity exceeds speed of light 1 0.4205085727E+11 0.1402665616E+01 Warning: maximum velocity exceeds speed of light 1 0.4205060286E+11 0.1402657130E+01 Warning: maximum velocity exceeds speed of light 1 0.4205032120E+11 0.1402647734E+01 Warning: maximum velocity exceeds speed of light 1 0.4205001728E+11 0.1402637597E+01 Warning: maximum velocity exceeds speed of light 1 0.4204969818E+11 0.1402626953E+01 Warning: maximum velocity exceeds speed of light 1 0.4204936118E+11 0.1402615712E+01 Warning: maximum velocity exceeds speed of light 1 0.4204892136E+11 0.1402601041E+01 Warning: maximum velocity exceeds speed of light 1 0.4204834276E+11 0.1402581741E+01 3680 8.730402 7983.931 -17.424127 2.407686 51.730864 0.000000 0.000000 0.000000 0.217143 -3.396370 3368 21 -6.8073E+00 8.730402 2.980492 -26.165876 5.221963 -99.000000 51.730864 0.000000 0.059838 0.782857 0.643000 5 2.8747E+05 3.891645 6.524545 2.407686 -30.802063 -13.480912 49.075596 0.000002 0.000000 0.371891 0.207E+04 min_dr_div_cs log_rel_run_E_err -6.0008674457696678 rel_E_err 4.0504210572561302D-09 k, q, energy_removed_layers before adjustment is 897 0.97873698964755229 9.4617469753799333E+049 k, q, energy_removed_layers after adjustment is 902 0.97790554270931296 9.4685240796384419E+049 Layers above q= 0.97790554270931296 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12107.527343750000 max vel inside fraction of cutoff 1759.2554333420608 max c/cs inside fraction of cutoff 2.5339210740215887 average v/vesc outside cutoff 2.0977752539510570 Kinetic plus potential energy outside cutoff 9.4685240796384419E+049 mass inside cutoff 902 50.587898390501564 relax counter 0 log max v [km/s]= 5.6237488837742147 check gamma integral 4.9915009331912681E-002 Warning: maximum velocity exceeds speed of light 1 0.4204781269E+11 0.1402564059E+01 Warning: maximum velocity exceeds speed of light 1 0.4204727854E+11 0.1402546242E+01 Warning: maximum velocity exceeds speed of light 1 0.4204659071E+11 0.1402523299E+01 Warning: maximum velocity exceeds speed of light 1 0.4204569861E+11 0.1402493541E+01 Warning: maximum velocity exceeds speed of light 1 0.4204493806E+11 0.1402468172E+01 Warning: maximum velocity exceeds speed of light 1 0.4204421181E+11 0.1402443947E+01 Warning: maximum velocity exceeds speed of light 1 0.4204348859E+11 0.1402419823E+01 Warning: maximum velocity exceeds speed of light 1 0.4204278162E+11 0.1402396241E+01 Warning: maximum velocity exceeds speed of light 1 0.4204209163E+11 0.1402373225E+01 Warning: maximum velocity exceeds speed of light 1 0.4204140408E+11 0.1402350291E+01 3690 8.748753 7855.053 -17.286572 2.456563 51.730864 0.000000 0.000000 0.000000 0.217143 -3.348592 3390 21 -6.9706E+00 8.748753 2.991864 -26.085025 5.397279 -99.000000 51.730864 0.000000 0.059838 0.782857 0.640990 5 2.8747E+05 3.942618 6.519018 2.456563 -28.563099 -13.503661 49.088611 0.000002 0.000000 0.371891 0.208E+04 min_dr_div_cs log_rel_run_E_err -5.9958868951600026 rel_E_err 2.5721432415804900D-11 k, q, energy_removed_layers before adjustment is 900 0.97855366919699660 9.4684750422409980E+049 k, q, energy_removed_layers after adjustment is 904 0.97790554270931274 9.4729403319988143E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12149.498046875000 max vel inside fraction of cutoff 1735.5740343212603 max c/cs inside fraction of cutoff 2.4928406315173124 average v/vesc outside cutoff 2.1161042914187460 Kinetic plus potential energy outside cutoff 9.4729403319988143E+049 mass inside cutoff 904 50.587898390501543 relax counter 0 log max v [km/s]= 5.6236772120227903 check gamma integral 4.9461656159579565E-002 Warning: maximum velocity exceeds speed of light 1 0.4204070101E+11 0.1402326840E+01 Warning: maximum velocity exceeds speed of light 1 0.4203982539E+11 0.1402297632E+01 Warning: maximum velocity exceeds speed of light 1 0.4203872874E+11 0.1402261052E+01 Warning: maximum velocity exceeds speed of light 1 0.4203777035E+11 0.1402229083E+01 Warning: maximum velocity exceeds speed of light 1 0.4203686092E+11 0.1402198748E+01 Warning: maximum velocity exceeds speed of light 1 0.4203597011E+11 0.1402169034E+01 Warning: maximum velocity exceeds speed of light 1 0.4203508528E+11 0.1402139519E+01 Warning: maximum velocity exceeds speed of light 1 0.4203420031E+11 0.1402110000E+01 Warning: maximum velocity exceeds speed of light 1 0.4203331232E+11 0.1402080379E+01 Warning: maximum velocity exceeds speed of light 1 0.4203241996E+11 0.1402050613E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3700 8.768519 7746.360 -17.140117 2.509206 51.730864 0.000000 0.000000 0.000000 0.217143 -3.297246 3405 21 -6.9897E+00 8.768519 3.001607 -25.664750 5.613186 -99.000000 51.730864 0.000000 0.059838 0.782857 0.638864 5 2.8747E+05 3.997587 6.514299 2.509206 -26.250627 -13.523152 49.088611 0.000002 0.000000 0.371891 0.209E+04 lgRho_cntr log_rel_run_E_err -5.9955587066889384 rel_E_err 3.5937801560299497D-11 save LOGS/profile23.data for model 3700 save photos/x700 for model 3700 k, q, energy_removed_layers before adjustment is 904 0.97855366919699682 9.4719947636996998E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931296 9.4764640690591253E+049 Layers above q= 0.97790554270931296 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12186.347656250000 max vel inside fraction of cutoff 1743.6085915061897 max c/cs inside fraction of cutoff 2.4691533259396334 average v/vesc outside cutoff 2.1319934165932168 Kinetic plus potential energy outside cutoff 9.4764640690591253E+049 mass inside cutoff 908 50.587898390501564 relax counter 0 log max v [km/s]= 5.6235843946028492 check gamma integral 4.8956812425335082E-002 Warning: maximum velocity exceeds speed of light 1 0.4203152266E+11 0.1402020683E+01 Warning: maximum velocity exceeds speed of light 1 0.4203062026E+11 0.1401990582E+01 Warning: maximum velocity exceeds speed of light 1 0.4202971277E+11 0.1401960311E+01 Warning: maximum velocity exceeds speed of light 1 0.4202880031E+11 0.1401929875E+01 Warning: maximum velocity exceeds speed of light 1 0.4202788299E+11 0.1401899276E+01 Warning: maximum velocity exceeds speed of light 1 0.4202696092E+11 0.1401868519E+01 Warning: maximum velocity exceeds speed of light 1 0.4202603416E+11 0.1401837606E+01 Warning: maximum velocity exceeds speed of light 1 0.4202510274E+11 0.1401806537E+01 Warning: maximum velocity exceeds speed of light 1 0.4202416674E+11 0.1401775316E+01 Warning: maximum velocity exceeds speed of light 1 0.4202322625E+11 0.1401743944E+01 3710 8.787045 7661.215 -17.004410 2.558559 51.730864 0.000000 0.000000 0.000000 0.217143 -3.249208 3409 21 -7.0474E+00 8.787045 3.009360 -24.965873 5.848338 -99.000000 51.730864 0.000000 0.059838 0.782857 0.636916 5 2.8747E+05 4.049186 6.510605 2.558559 -24.172479 -13.538661 49.088611 0.000002 0.000000 0.371891 0.210E+04 lgRho_cntr log_rel_run_E_err -5.9954109421653135 rel_E_err 3.0580282131900496D-11 k, q, energy_removed_layers before adjustment is 906 0.97855366919699671 9.4746943334384725E+049 k, q, energy_removed_layers after adjustment is 910 0.97790554270931285 9.4791616241893380E+049 Layers above q= 0.97790554270931285 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12216.275390625000 max vel inside fraction of cutoff 1744.1445709692296 max c/cs inside fraction of cutoff 2.4748710250141701 average v/vesc outside cutoff 2.1447710841356868 Kinetic plus potential energy outside cutoff 9.4791616241893380E+049 mass inside cutoff 910 50.587898390501550 relax counter 0 log max v [km/s]= 5.6234893914844015 check gamma integral 4.8472500661955804E-002 Warning: maximum velocity exceeds speed of light 1 0.4202228141E+11 0.1401712428E+01 Warning: maximum velocity exceeds speed of light 1 0.4202133235E+11 0.1401680770E+01 Warning: maximum velocity exceeds speed of light 1 0.4202037916E+11 0.1401648975E+01 Warning: maximum velocity exceeds speed of light 1 0.4201942189E+11 0.1401617044E+01 Warning: maximum velocity exceeds speed of light 1 0.4201846056E+11 0.1401584978E+01 Warning: maximum velocity exceeds speed of light 1 0.4201749514E+11 0.1401552775E+01 Warning: maximum velocity exceeds speed of light 1 0.4201652560E+11 0.1401520434E+01 Warning: maximum velocity exceeds speed of light 1 0.4201555189E+11 0.1401487955E+01 Warning: maximum velocity exceeds speed of light 1 0.4201457395E+11 0.1401455335E+01 Warning: maximum velocity exceeds speed of light 1 0.4201359172E+11 0.1401422571E+01 3720 8.805371 7587.184 -16.871624 2.607387 51.730864 0.000000 0.000000 0.000000 0.217143 -3.201788 3421 21 -7.0875E+00 8.805371 3.016193 -23.729247 6.113659 -99.000000 51.730864 0.000000 0.059838 0.782857 0.635029 5 2.8747E+05 4.100299 6.507401 2.607387 -22.198075 -13.552329 49.088611 0.000002 0.000000 0.371891 0.211E+04 lgRho_cntr log_rel_run_E_err -5.9952713629421126 rel_E_err 3.3067269642988178D-11 k, q, energy_removed_layers before adjustment is 904 0.97855366919699671 9.4770983461071249E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931285 9.4815609456141898E+049 Layers above q= 0.97790554270931285 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12243.099609375000 max vel inside fraction of cutoff 1749.4575199634392 max c/cs inside fraction of cutoff 2.4446733306662551 average v/vesc outside cutoff 2.1561571935273922 Kinetic plus potential energy outside cutoff 9.4815609456141898E+049 mass inside cutoff 908 50.587898390501550 relax counter 0 log max v [km/s]= 5.6233898107219442 check gamma integral 4.7983524023269677E-002 Warning: maximum velocity exceeds speed of light 1 0.4201260510E+11 0.1401389661E+01 Warning: maximum velocity exceeds speed of light 1 0.4201161398E+11 0.1401356600E+01 Warning: maximum velocity exceeds speed of light 1 0.4201061823E+11 0.1401323386E+01 Warning: maximum velocity exceeds speed of light 1 0.4200961769E+11 0.1401290011E+01 Warning: maximum velocity exceeds speed of light 1 0.4200861216E+11 0.1401256471E+01 Warning: maximum velocity exceeds speed of light 1 0.4200760148E+11 0.1401222758E+01 Warning: maximum velocity exceeds speed of light 1 0.4200658545E+11 0.1401188867E+01 Warning: maximum velocity exceeds speed of light 1 0.4200556391E+11 0.1401154792E+01 Warning: maximum velocity exceeds speed of light 1 0.4200453669E+11 0.1401120528E+01 Warning: maximum velocity exceeds speed of light 1 0.4200350363E+11 0.1401086068E+01 3730 8.823526 7519.982 -16.741477 2.655771 51.730864 0.000000 0.000000 0.000000 0.217143 -3.154917 3442 21 -7.1136E+00 8.823526 3.022438 -22.147229 6.403392 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633198 5 2.8747E+05 4.151002 6.504437 2.655771 -20.318658 -13.564821 49.088611 0.000002 0.000000 0.371891 0.211E+04 lgRho_cntr log_rel_run_E_err -5.9951333100146629 rel_E_err 3.3132116526832527D-11 k, q, energy_removed_layers before adjustment is 904 0.97855366919699671 9.4792437510770542E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931285 9.4837001860037975E+049 Layers above q= 0.97790554270931285 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12268.000000000000 max vel inside fraction of cutoff 1748.2997068039053 max c/cs inside fraction of cutoff 2.4178504791004745 average v/vesc outside cutoff 2.1666510868186424 Kinetic plus potential energy outside cutoff 9.4837001860037975E+049 mass inside cutoff 908 50.587898390501550 relax counter 0 log max v [km/s]= 5.6232855176044927 check gamma integral 4.7489215844232435E-002 Warning: maximum velocity exceeds speed of light 1 0.4200246452E+11 0.1401051407E+01 Warning: maximum velocity exceeds speed of light 1 0.4200141917E+11 0.1401016538E+01 Warning: maximum velocity exceeds speed of light 1 0.4200036734E+11 0.1400981453E+01 Warning: maximum velocity exceeds speed of light 1 0.4199930879E+11 0.1400946143E+01 Warning: maximum velocity exceeds speed of light 1 0.4199824324E+11 0.1400910601E+01 Warning: maximum velocity exceeds speed of light 1 0.4199717041E+11 0.1400874815E+01 Warning: maximum velocity exceeds speed of light 1 0.4199609000E+11 0.1400838776E+01 Warning: maximum velocity exceeds speed of light 1 0.4199500169E+11 0.1400802474E+01 Warning: maximum velocity exceeds speed of light 1 0.4199390513E+11 0.1400765897E+01 Warning: maximum velocity exceeds speed of light 1 0.4199279997E+11 0.1400729033E+01 3740 8.841506 7456.898 -16.613935 2.703717 51.730864 0.000000 0.000000 0.000000 0.217143 -3.108604 3464 21 -7.1253E+00 8.841506 3.028340 -20.522494 6.707905 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631423 5 2.8747E+05 4.201284 6.501606 2.703717 -18.529376 -13.576628 49.071126 0.000002 0.000000 0.371891 0.212E+04 lgRho_cntr log_rel_run_E_err -5.9950126431859614 rel_E_err 2.2323875512809045D-11 k, q, energy_removed_layers before adjustment is 904 0.97855366919699671 9.4812264172463883E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931285 9.4856756976904567E+049 Layers above q= 0.97790554270931285 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12291.869140625000 max vel inside fraction of cutoff 1751.5759276912897 max c/cs inside fraction of cutoff 2.3925832198566659 average v/vesc outside cutoff 2.1766457056332360 Kinetic plus potential energy outside cutoff 9.4856756976904567E+049 mass inside cutoff 908 50.587898390501550 relax counter 0 log max v [km/s]= 5.6231748332136693 check gamma integral 4.6988817688896414E-002 Warning: maximum velocity exceeds speed of light 1 0.4199168585E+11 0.1400691870E+01 Warning: maximum velocity exceeds speed of light 1 0.4199056239E+11 0.1400654395E+01 Warning: maximum velocity exceeds speed of light 1 0.4198920033E+11 0.1400608962E+01 Warning: maximum velocity exceeds speed of light 1 0.4198754594E+11 0.1400553777E+01 Warning: maximum velocity exceeds speed of light 1 0.4198615057E+11 0.1400507233E+01 Warning: maximum velocity exceeds speed of light 1 0.4198486202E+11 0.1400464251E+01 Warning: maximum velocity exceeds speed of light 1 0.4198361697E+11 0.1400422721E+01 Warning: maximum velocity exceeds speed of light 1 0.4198238606E+11 0.1400381662E+01 Warning: maximum velocity exceeds speed of light 1 0.4198115476E+11 0.1400340590E+01 Warning: maximum velocity exceeds speed of light 1 0.4197991553E+11 0.1400299254E+01 3750 8.861069 7389.349 -16.476627 2.760406 51.730864 0.000000 0.000000 0.000000 0.217143 -3.058351 3472 21 -7.1156E+00 8.861069 3.034719 -18.798047 7.048844 -99.000000 51.730864 0.000000 0.059838 0.782857 0.629534 5 2.8747E+05 4.256068 6.498557 2.760406 -16.660361 -13.589390 49.071126 0.000002 0.000000 0.371891 0.213E+04 lgRho_cntr log_rel_run_E_err -5.9948830935388848 rel_E_err 1.8075437140840295D-11 save photos/x750 for model 3750 k, q, energy_removed_layers before adjustment is 903 0.97855366919699649 9.4833205714712530E+049 k, q, energy_removed_layers after adjustment is 907 0.97790554270931263 9.4877609135253669E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12318.041015625000 max vel inside fraction of cutoff 1752.7046577342462 max c/cs inside fraction of cutoff 2.3650057627018906 average v/vesc outside cutoff 2.1875340474677851 Kinetic plus potential energy outside cutoff 9.4877609135253669E+049 mass inside cutoff 907 50.587898390501543 relax counter 0 log max v [km/s]= 5.6230415603475947 check gamma integral 4.6429686195443506E-002 Warning: maximum velocity exceeds speed of light 1 0.4197841389E+11 0.1400249165E+01 Warning: maximum velocity exceeds speed of light 1 0.4197659098E+11 0.1400188359E+01 Warning: maximum velocity exceeds speed of light 1 0.4197504260E+11 0.1400136710E+01 Warning: maximum velocity exceeds speed of light 1 0.4197360282E+11 0.1400088685E+01 Warning: maximum velocity exceeds speed of light 1 0.4197220243E+11 0.1400041973E+01 Warning: maximum velocity exceeds speed of light 1 0.4197080897E+11 0.1399995492E+01 Warning: maximum velocity exceeds speed of light 1 0.4196912074E+11 0.1399939179E+01 Warning: maximum velocity exceeds speed of light 1 0.4196707186E+11 0.1399870835E+01 Warning: maximum velocity exceeds speed of light 1 0.4196532353E+11 0.1399812517E+01 Warning: maximum velocity exceeds speed of light 1 0.4196368644E+11 0.1399757910E+01 3760 8.881764 7313.721 -16.333050 2.821152 51.730864 0.000000 0.000000 0.000000 0.217143 -3.005327 3500 21 -7.0359E+00 8.881764 3.041918 -17.007750 7.410957 -99.000000 51.730864 0.000000 0.059838 0.782857 0.627586 5 2.8747E+05 4.314118 6.495083 2.821152 -14.767794 -13.603790 49.071126 0.000002 0.000000 0.371891 0.213E+04 lgRho_cntr log_rel_run_E_err -5.9946877122531674 rel_E_err 4.5668948447200234D-11 k, q, energy_removed_layers before adjustment is 902 0.97855366919699649 9.4856238036544025E+049 k, q, energy_removed_layers after adjustment is 906 0.97790554270931263 9.4900527892384186E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12348.050781250000 max vel inside fraction of cutoff 1754.9265666102510 max c/cs inside fraction of cutoff 2.3333202455963509 average v/vesc outside cutoff 2.1999289025059174 Kinetic plus potential energy outside cutoff 9.4900527892384186E+049 mass inside cutoff 906 50.587898390501543 relax counter 0 log max v [km/s]= 5.6228736332205207 check gamma integral 4.5817261489489301E-002 Warning: maximum velocity exceeds speed of light 1 0.4196208126E+11 0.1399704367E+01 Warning: maximum velocity exceeds speed of light 1 0.4196013592E+11 0.1399639477E+01 Warning: maximum velocity exceeds speed of light 1 0.4195777386E+11 0.1399560688E+01 Warning: maximum velocity exceeds speed of light 1 0.4195574017E+11 0.1399492851E+01 Warning: maximum velocity exceeds speed of light 1 0.4195381264E+11 0.1399428555E+01 Warning: maximum velocity exceeds speed of light 1 0.4195189665E+11 0.1399364645E+01 Warning: maximum velocity exceeds speed of light 1 0.4194957287E+11 0.1399287132E+01 Warning: maximum velocity exceeds speed of light 1 0.4194674925E+11 0.1399192946E+01 Warning: maximum velocity exceeds speed of light 1 0.4194422718E+11 0.1399108819E+01 Warning: maximum velocity exceeds speed of light 1 0.4194175512E+11 0.1399026360E+01 3770 8.901186 7223.900 -16.199777 2.879425 51.730864 0.000000 0.000000 0.000000 0.217143 -2.955644 3513 21 -6.9014E+00 8.901186 3.050564 -15.198555 7.746493 -99.000000 51.730864 0.000000 0.059838 0.782857 0.625817 5 2.8747E+05 4.368705 6.490910 2.879425 -13.067114 -13.621087 49.071126 0.000002 0.000000 0.371891 0.214E+04 lgRho_cntr log_rel_run_E_err -5.9943346160436253 rel_E_err 8.6604960141773300D-11 k, q, energy_removed_layers before adjustment is 901 0.97855366919699649 9.4882703719320258E+049 k, q, energy_removed_layers after adjustment is 905 0.97790554270931263 9.4926841605767942E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12384.775390625000 max vel inside fraction of cutoff 1856.9012837303712 max c/cs inside fraction of cutoff 2.2942983788185942 average v/vesc outside cutoff 2.2149559084581103 Kinetic plus potential energy outside cutoff 9.4926841605767942E+049 mass inside cutoff 905 50.587898390501543 relax counter 0 log max v [km/s]= 5.6226466002207189 check gamma integral 4.5210917837192201E-002 Warning: maximum velocity exceeds speed of light 1 0.4193875238E+11 0.1398926199E+01 Warning: maximum velocity exceeds speed of light 1 0.4193509718E+11 0.1398804275E+01 Warning: maximum velocity exceeds speed of light 1 0.4193187888E+11 0.1398696924E+01 Warning: maximum velocity exceeds speed of light 1 0.4192898642E+11 0.1398600442E+01 Warning: maximum velocity exceeds speed of light 1 0.4192628768E+11 0.1398510422E+01 Warning: maximum velocity exceeds speed of light 1 0.4192367841E+11 0.1398423386E+01 Warning: maximum velocity exceeds speed of light 1 0.4192117611E+11 0.1398339918E+01 Warning: maximum velocity exceeds speed of light 1 0.4191884797E+11 0.1398262259E+01 Warning: maximum velocity exceeds speed of light 1 0.4191664311E+11 0.1398188713E+01 Warning: maximum velocity exceeds speed of light 1 0.4191397399E+11 0.1398099681E+01 3780 8.910793 7124.908 -16.134242 2.909097 51.730864 0.000000 0.000000 0.000000 0.217143 -2.931053 3549 21 -6.9120E+00 8.910793 3.060246 -13.800348 7.910169 -99.000000 51.730864 0.000000 0.059838 0.782857 0.624972 5 2.8747E+05 4.395765 6.486302 2.909097 -12.251465 -13.640453 49.071126 0.000002 0.000000 0.371891 0.215E+04 max increase log_rel_run_E_err -5.9940591329178199 rel_E_err 1.3318303433216572D-11 k, q, energy_removed_layers before adjustment is 900 0.97855366919699649 9.4911724780881530E+049 k, q, energy_removed_layers after adjustment is 904 0.97790554270931263 9.4955673976745833E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12426.798828125000 max vel inside fraction of cutoff 2109.9090844862862 max c/cs inside fraction of cutoff 2.2492156493635784 average v/vesc outside cutoff 2.2320000013695402 Kinetic plus potential energy outside cutoff 9.4955673976745833E+049 mass inside cutoff 904 50.587898390501543 relax counter 0 log max v [km/s]= 5.6223588395857007 check gamma integral 4.4880157405125402E-002 Warning: maximum velocity exceeds speed of light 1 0.4191073767E+11 0.1397991729E+01 Warning: maximum velocity exceeds speed of light 1 0.4190680624E+11 0.1397860590E+01 Warning: maximum velocity exceeds speed of light 1 0.4190363061E+11 0.1397754663E+01 Warning: maximum velocity exceeds speed of light 1 0.4190106096E+11 0.1397668949E+01 Warning: maximum velocity exceeds speed of light 1 0.4189794927E+11 0.1397565154E+01 Warning: maximum velocity exceeds speed of light 1 0.4189417494E+11 0.1397439256E+01 Warning: maximum velocity exceeds speed of light 1 0.4189112980E+11 0.1397337681E+01 Warning: maximum velocity exceeds speed of light 1 0.4188855496E+11 0.1397251793E+01 Warning: maximum velocity exceeds speed of light 1 0.4188608367E+11 0.1397169360E+01 Warning: maximum velocity exceeds speed of light 1 0.4188369955E+11 0.1397089834E+01 3790 8.905469 7030.197 -16.170311 2.892630 51.730864 0.000000 0.000000 0.000000 0.217143 -2.944744 3550 21 -6.9993E+00 8.905469 3.069637 -13.278369 7.820279 -99.000000 51.730864 0.000000 0.059838 0.782857 0.625425 5 2.8747E+05 4.380738 6.481838 2.892630 -12.700604 -13.659240 49.071126 0.000002 0.000000 0.371891 0.216E+04 min_dr_div_cs log_rel_run_E_err -5.9931589010171162 rel_E_err 1.5222293419559803D-11 k, q, energy_removed_layers before adjustment is 900 0.97855366919699649 9.4938876170837595E+049 k, q, energy_removed_layers after adjustment is 904 0.97790554270931263 9.4982623987404145E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12468.496093750000 max vel inside fraction of cutoff 2300.4258296996845 max c/cs inside fraction of cutoff 2.2039503633431639 average v/vesc outside cutoff 2.2487412355563006 Kinetic plus potential energy outside cutoff 9.4982623987404145E+049 mass inside cutoff 904 50.587898390501543 relax counter 0 log max v [km/s]= 5.6220450355777318 check gamma integral 4.5018840497171177E-002 Warning: maximum velocity exceeds speed of light 1 0.4188150141E+11 0.1397016512E+01 Warning: maximum velocity exceeds speed of light 1 0.4187952904E+11 0.1396950721E+01 Warning: maximum velocity exceeds speed of light 1 0.4187714784E+11 0.1396871293E+01 Warning: maximum velocity exceeds speed of light 1 0.4187426980E+11 0.1396775292E+01 Warning: maximum velocity exceeds speed of light 1 0.4187078660E+11 0.1396659105E+01 Warning: maximum velocity exceeds speed of light 1 0.4186798120E+11 0.1396565527E+01 Warning: maximum velocity exceeds speed of light 1 0.4186548552E+11 0.1396482280E+01 Warning: maximum velocity exceeds speed of light 1 0.4186299808E+11 0.1396399308E+01 Warning: maximum velocity exceeds speed of light 1 0.4186059044E+11 0.1396318997E+01 Warning: maximum velocity exceeds speed of light 1 0.4185828770E+11 0.1396242186E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3800 8.892725 6958.646 -16.257295 2.853802 51.730864 0.000000 0.000000 0.000000 0.217143 -2.977574 3541 21 -7.0412E+00 8.892725 3.076823 -13.484887 7.602264 -99.000000 51.730864 0.000000 0.059838 0.782857 0.626520 6 2.8747E+05 4.344785 6.478438 2.853802 -13.797688 -13.673614 49.071126 0.000002 0.000000 0.371891 0.217E+04 min_dr_div_cs log_rel_run_E_err -5.9858018037259670 rel_E_err 4.0766066492592077D-12 save LOGS/profile24.data for model 3800 save photos/x800 for model 3800 k, q, energy_removed_layers before adjustment is 901 0.97855366919699649 9.4959017906835153E+049 k, q, energy_removed_layers after adjustment is 905 0.97790554270931263 9.5002599455217976E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12501.031250000000 max vel inside fraction of cutoff 2332.3983451448662 max c/cs inside fraction of cutoff 2.1682628418998142 average v/vesc outside cutoff 2.2616894316378993 Kinetic plus potential energy outside cutoff 9.5002599455217976E+049 mass inside cutoff 905 50.587898390501543 relax counter 0 log max v [km/s]= 5.6217814586780968 check gamma integral 4.5390613174318105E-002 Warning: maximum velocity exceeds speed of light 1 0.4185612564E+11 0.1396170068E+01 Warning: maximum velocity exceeds speed of light 1 0.4185351617E+11 0.1396083025E+01 Warning: maximum velocity exceeds speed of light 1 0.4185036327E+11 0.1395977856E+01 Warning: maximum velocity exceeds speed of light 1 0.4184753104E+11 0.1395883383E+01 Warning: maximum velocity exceeds speed of light 1 0.4184472588E+11 0.1395789813E+01 Warning: maximum velocity exceeds speed of light 1 0.4184206920E+11 0.1395701196E+01 Warning: maximum velocity exceeds speed of light 1 0.4183957459E+11 0.1395617984E+01 Warning: maximum velocity exceeds speed of light 1 0.4183656280E+11 0.1395517522E+01 Warning: maximum velocity exceeds speed of light 1 0.4183292247E+11 0.1395396093E+01 Warning: maximum velocity exceeds speed of light 1 0.4182999351E+11 0.1395298394E+01 3810 8.874043 6885.773 -16.385984 2.798471 51.730864 0.000000 0.000000 0.000000 0.217143 -3.025823 3560 21 -6.9624E+00 8.874043 3.084225 -14.212335 7.277887 -99.000000 51.730864 0.000000 0.059838 0.782857 0.628156 6 2.8747E+05 4.292137 6.474955 2.798471 -15.461773 -13.688422 49.071126 0.000002 0.000000 0.371891 0.218E+04 min_dr_div_cs log_rel_run_E_err -5.9818538184037600 rel_E_err 2.4110719489670150D-09 k, q, energy_removed_layers before adjustment is 902 0.97839321118192146 9.4997704566816997E+049 k, q, energy_removed_layers after adjustment is 905 0.97790554270931263 9.5022600001335896E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12535.144531250000 max vel inside fraction of cutoff 2201.0784971319454 max c/cs inside fraction of cutoff 2.1303393223598404 average v/vesc outside cutoff 2.2751573671839247 Kinetic plus potential energy outside cutoff 9.5022600001335896E+049 mass inside cutoff 905 50.587898390501543 relax counter 0 log max v [km/s]= 5.6214877971841721 check gamma integral 4.5927225188939581E-002 Warning: maximum velocity exceeds speed of light 1 0.4182763629E+11 0.1395219765E+01 Warning: maximum velocity exceeds speed of light 1 0.4182547889E+11 0.1395147802E+01 Warning: maximum velocity exceeds speed of light 1 0.4182340857E+11 0.1395078744E+01 Warning: maximum velocity exceeds speed of light 1 0.4182091259E+11 0.1394995487E+01 Warning: maximum velocity exceeds speed of light 1 0.4181790078E+11 0.1394895024E+01 Warning: maximum velocity exceeds speed of light 1 0.4181426272E+11 0.1394773671E+01 Warning: maximum velocity exceeds speed of light 1 0.4181122453E+11 0.1394672328E+01 Warning: maximum velocity exceeds speed of light 1 0.4180845031E+11 0.1394579790E+01 Warning: maximum velocity exceeds speed of light 1 0.4180579849E+11 0.1394491335E+01 Warning: maximum velocity exceeds speed of light 1 0.4180323923E+11 0.1394405967E+01 3820 8.855112 6822.232 -16.517781 2.742295 51.730864 0.000000 0.000000 0.000000 0.217143 -3.074817 3539 21 -7.0422E+00 8.855112 3.090752 -15.226421 6.946761 -99.000000 51.730864 0.000000 0.059838 0.782857 0.629860 6 2.8747E+05 4.238873 6.471904 2.742295 -17.218384 -13.701479 49.071126 0.000002 0.000000 0.371891 0.218E+04 min_dr_div_cs log_rel_run_E_err -5.9791888992311870 rel_E_err 1.1170383480825906D-09 k, q, energy_removed_layers before adjustment is 901 0.97839321118192146 9.5015008570346078E+049 k, q, energy_removed_layers after adjustment is 904 0.97790554270931263 9.5039764085349408E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12565.730468750000 max vel inside fraction of cutoff 2059.3108772499586 max c/cs inside fraction of cutoff 2.0959350504381877 average v/vesc outside cutoff 2.2871428677520016 Kinetic plus potential energy outside cutoff 9.5039764085349408E+049 mass inside cutoff 904 50.587898390501543 relax counter 0 log max v [km/s]= 5.6212099354898646 check gamma integral 4.6459347685852262E-002 Warning: maximum velocity exceeds speed of light 1 0.4180080608E+11 0.1394324806E+01 Warning: maximum velocity exceeds speed of light 1 0.4179787188E+11 0.1394226932E+01 Warning: maximum velocity exceeds speed of light 1 0.4179433014E+11 0.1394108792E+01 Warning: maximum velocity exceeds speed of light 1 0.4179130454E+11 0.1394007869E+01 Warning: maximum velocity exceeds speed of light 1 0.4178850028E+11 0.1393914328E+01 Warning: maximum velocity exceeds speed of light 1 0.4178579180E+11 0.1393823983E+01 Warning: maximum velocity exceeds speed of light 1 0.4178312083E+11 0.1393734889E+01 Warning: maximum velocity exceeds speed of light 1 0.4178045872E+11 0.1393646091E+01 Warning: maximum velocity exceeds speed of light 1 0.4177779070E+11 0.1393557095E+01 Warning: maximum velocity exceeds speed of light 1 0.4177457334E+11 0.1393449776E+01 3830 8.835558 6758.962 -16.655460 2.687346 51.730864 0.000000 0.000000 0.000000 0.217143 -3.125546 3537 21 -6.9628E+00 8.835558 3.097319 -16.462080 6.608416 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631667 7 2.8747E+05 4.183942 6.468852 2.687346 -19.110489 -13.714616 49.071126 0.000002 0.000000 0.371891 0.219E+04 max increase log_rel_run_E_err -5.9773117952516124 rel_E_err 3.4223464026243999D-12 k, q, energy_removed_layers before adjustment is 901 0.97839321118192146 9.5031986506457645E+049 k, q, energy_removed_layers after adjustment is 904 0.97790554270931263 9.5056594708424596E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12596.992187500000 max vel inside fraction of cutoff 1860.5487067665126 max c/cs inside fraction of cutoff 2.0603670679635440 average v/vesc outside cutoff 2.2993073894061711 Kinetic plus potential energy outside cutoff 9.5056594708424596E+049 mass inside cutoff 904 50.587898390501543 relax counter 0 log max v [km/s]= 5.6209120229777270 check gamma integral 4.7000647056791515E-002 Warning: maximum velocity exceeds speed of light 1 0.4177068992E+11 0.1393320239E+01 Warning: maximum velocity exceeds speed of light 1 0.4176744374E+11 0.1393211958E+01 Warning: maximum velocity exceeds speed of light 1 0.4176443309E+11 0.1393111534E+01 Warning: maximum velocity exceeds speed of light 1 0.4176151711E+11 0.1393014267E+01 Warning: maximum velocity exceeds speed of light 1 0.4175863093E+11 0.1392917994E+01 Warning: maximum velocity exceeds speed of light 1 0.4175574277E+11 0.1392821656E+01 Warning: maximum velocity exceeds speed of light 1 0.4175226005E+11 0.1392705485E+01 Warning: maximum velocity exceeds speed of light 1 0.4174805651E+11 0.1392565270E+01 Warning: maximum velocity exceeds speed of light 1 0.4174449239E+11 0.1392446383E+01 Warning: maximum velocity exceeds speed of light 1 0.4174118360E+11 0.1392336014E+01 3840 8.815103 6690.545 -16.801186 2.632624 51.730864 0.000000 0.000000 0.000000 0.217143 -3.178759 3533 21 -6.9712E+00 8.815103 3.104498 -17.924513 6.269000 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633602 6 2.8747E+05 4.126565 6.465537 2.632624 -21.178064 -13.728977 49.071126 0.000002 0.000000 0.371891 0.220E+04 lgRho_cntr log_rel_run_E_err -5.9764394013562088 rel_E_err 3.3692268831832449D-12 k, q, energy_removed_layers before adjustment is 902 0.97839321118192146 9.5049329378835231E+049 k, q, energy_removed_layers after adjustment is 905 0.97790554270931263 9.5073769468488179E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12631.738281250000 max vel inside fraction of cutoff 1762.3111931301094 max c/cs inside fraction of cutoff 2.0203521685166774 average v/vesc outside cutoff 2.3126982940362106 Kinetic plus potential energy outside cutoff 9.5073769468488179E+049 mass inside cutoff 905 50.587898390501543 relax counter 0 log max v [km/s]= 5.6205647596601755 check gamma integral 4.7561068689717108E-002 Warning: maximum velocity exceeds speed of light 1 0.4173797031E+11 0.1392228830E+01 Warning: maximum velocity exceeds speed of light 1 0.4173477904E+11 0.1392122381E+01 Warning: maximum velocity exceeds speed of light 1 0.4173093037E+11 0.1391994003E+01 Warning: maximum velocity exceeds speed of light 1 0.4172628453E+11 0.1391839035E+01 Warning: maximum velocity exceeds speed of light 1 0.4172233594E+11 0.1391707324E+01 Warning: maximum velocity exceeds speed of light 1 0.4171865693E+11 0.1391584605E+01 Warning: maximum velocity exceeds speed of light 1 0.4171506984E+11 0.1391464953E+01 Warning: maximum velocity exceeds speed of light 1 0.4171149277E+11 0.1391345635E+01 Warning: maximum velocity exceeds speed of light 1 0.4170717817E+11 0.1391201715E+01 Warning: maximum velocity exceeds speed of light 1 0.4170196893E+11 0.1391027953E+01 3850 8.794959 6616.287 -16.946436 2.578757 51.730864 0.000000 0.000000 0.000000 0.217143 -3.231299 3516 21 -6.7953E+00 8.794959 3.112387 -19.565176 5.961992 -99.000000 51.730864 0.000000 0.059838 0.782857 0.635556 6 2.8747E+05 4.070143 6.461926 2.578757 -23.306702 -13.744758 49.071126 0.000002 0.000000 0.371891 0.220E+04 lgRho_cntr log_rel_run_E_err -5.9723747247497352 rel_E_err 3.3321754229032618D-12 save photos/x850 for model 3850 k, q, energy_removed_layers before adjustment is 904 0.97839321118192157 9.5067817932529872E+049 k, q, energy_removed_layers after adjustment is 907 0.97790554270931274 9.5092065522376479E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12670.621093750000 max vel inside fraction of cutoff 1746.6962079440978 max c/cs inside fraction of cutoff 1.9749809130637341 average v/vesc outside cutoff 2.3275622976471850 Kinetic plus potential energy outside cutoff 9.5092065522376479E+049 mass inside cutoff 907 50.587898390501543 relax counter 0 log max v [km/s]= 5.6201565603394936 check gamma integral 4.8110038740897226E-002 Warning: maximum velocity exceeds speed of light 1 0.4169750140E+11 0.1390878933E+01 Warning: maximum velocity exceeds speed of light 1 0.4169330830E+11 0.1390739066E+01 Warning: maximum velocity exceeds speed of light 1 0.4168919428E+11 0.1390601837E+01 Warning: maximum velocity exceeds speed of light 1 0.4168423020E+11 0.1390436253E+01 Warning: maximum velocity exceeds speed of light 1 0.4167823426E+11 0.1390236250E+01 Warning: maximum velocity exceeds speed of light 1 0.4167309137E+11 0.1390064702E+01 Warning: maximum velocity exceeds speed of light 1 0.4166824741E+11 0.1389903125E+01 Warning: maximum velocity exceeds speed of light 1 0.4166347092E+11 0.1389743798E+01 Warning: maximum velocity exceeds speed of light 1 0.4165770513E+11 0.1389551472E+01 Warning: maximum velocity exceeds speed of light 1 0.4165073748E+11 0.1389319056E+01 3860 8.774836 6527.446 -17.093288 2.524955 51.730864 0.000000 0.000000 0.000000 0.217143 -3.283914 3503 21 -6.6930E+00 8.774836 3.121962 -21.450416 5.692453 -99.000000 51.730864 0.000000 0.059838 0.782857 0.637552 5 2.8747E+05 4.013862 6.457591 2.524955 -25.529049 -13.763911 49.071126 0.000002 0.000000 0.371891 0.221E+04 lgRho_cntr log_rel_run_E_err -5.9676337887657507 rel_E_err 7.6570773263520641D-10 k, q, energy_removed_layers before adjustment is 905 0.97839321118192157 9.5089668117172797E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931274 9.5113672513022154E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12718.824218750000 max vel inside fraction of cutoff 1755.3095689882057 max c/cs inside fraction of cutoff 1.9315290557783757 average v/vesc outside cutoff 2.3458398413191741 Kinetic plus potential energy outside cutoff 9.5113672513022154E+049 mass inside cutoff 908 50.587898390501543 relax counter 0 log max v [km/s]= 5.6196226955291309 check gamma integral 4.8658495513778238E-002 Warning: maximum velocity exceeds speed of light 1 0.4164467514E+11 0.1389116838E+01 Warning: maximum velocity exceeds speed of light 1 0.4163889258E+11 0.1388923953E+01 Warning: maximum velocity exceeds speed of light 1 0.4163190700E+11 0.1388690939E+01 Warning: maximum velocity exceeds speed of light 1 0.4162345774E+11 0.1388409102E+01 Warning: maximum velocity exceeds speed of light 1 0.4161608205E+11 0.1388163075E+01 Warning: maximum velocity exceeds speed of light 1 0.4160896976E+11 0.1387925835E+01 Warning: maximum velocity exceeds speed of light 1 0.4160037002E+11 0.1387638979E+01 Warning: maximum velocity exceeds speed of light 1 0.4158995741E+11 0.1387291651E+01 Warning: maximum velocity exceeds speed of light 1 0.4158049270E+11 0.1386975943E+01 Warning: maximum velocity exceeds speed of light 1 0.4156902792E+11 0.1386593519E+01 3870 8.755534 6400.890 -17.235762 2.473357 51.730864 0.000000 0.000000 0.000000 0.217143 -3.334489 3498 21 -6.5085E+00 8.755534 3.135858 -23.548635 5.470657 -99.000000 51.730864 0.000000 0.059838 0.782857 0.639512 5 2.8747E+05 3.959954 6.451372 2.473357 -27.755039 -13.791709 49.071126 0.000002 0.000000 0.371891 0.222E+04 max increase log_rel_run_E_err -5.9675879864248360 rel_E_err 7.8498100182465405D-12 k, q, energy_removed_layers before adjustment is 905 0.97839321118192157 9.5120703821548378E+049 k, q, energy_removed_layers after adjustment is 908 0.97790554270931274 9.5145058344630890E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12790.818359375000 max vel inside fraction of cutoff 1763.0972336495502 max c/cs inside fraction of cutoff 2.0030321785080254 average v/vesc outside cutoff 2.3728312405150391 Kinetic plus potential energy outside cutoff 9.5145058344630890E+049 mass inside cutoff 908 50.587898390501543 relax counter 0 log max v [km/s]= 5.6187698687687746 check gamma integral 4.9191616956897034E-002 Warning: maximum velocity exceeds speed of light 1 0.4155511733E+11 0.1386129511E+01 Warning: maximum velocity exceeds speed of light 1 0.4154203706E+11 0.1385693200E+01 Warning: maximum velocity exceeds speed of light 1 0.4152615370E+11 0.1385163389E+01 Warning: maximum velocity exceeds speed of light 1 0.4150682795E+11 0.1384518751E+01 Warning: maximum velocity exceeds speed of light 1 0.4149017121E+11 0.1383963142E+01 Warning: maximum velocity exceeds speed of light 1 0.4147440600E+11 0.1383437271E+01 Warning: maximum velocity exceeds speed of light 1 0.4145863610E+11 0.1382911244E+01 Warning: maximum velocity exceeds speed of light 1 0.4144285338E+11 0.1382384789E+01 Warning: maximum velocity exceeds speed of light 1 0.4142751838E+11 0.1381873269E+01 Warning: maximum velocity exceeds speed of light 1 0.4141262723E+11 0.1381376553E+01 3880 8.752024 6196.263 -17.262130 2.463974 51.730864 0.000000 0.000000 0.000000 0.217143 -3.343722 3477 21 -6.4415E+00 8.752024 3.159010 -25.252984 5.433176 -99.000000 51.730864 0.000000 0.059838 0.782857 0.639868 5 2.8747E+05 3.950149 6.441232 2.463974 -28.170814 -13.838020 49.071126 0.000002 0.000000 0.371891 0.224E+04 min_dr_div_cs log_rel_run_E_err -5.9674304031794625 rel_E_err 5.6533004780936531D-11 k, q, energy_removed_layers before adjustment is 909 0.97839321118192146 9.5168125521930516E+049 k, q, energy_removed_layers after adjustment is 912 0.97790554270931263 9.5192042864180914E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -12916.367187500000 max vel inside fraction of cutoff 1746.0249589089626 max c/cs inside fraction of cutoff 2.1526553108814070 average v/vesc outside cutoff 2.4146120445901906 Kinetic plus potential energy outside cutoff 9.5192042864180914E+049 mass inside cutoff 912 50.587898390501543 relax counter 0 log max v [km/s]= 5.6171327831121136 check gamma integral 4.9341345178995931E-002 Warning: maximum velocity exceeds speed of light 1 0.4139457214E+11 0.1380774300E+01 Warning: maximum velocity exceeds speed of light 1 0.4137264264E+11 0.1380042811E+01 Warning: maximum velocity exceeds speed of light 1 0.4134595552E+11 0.1379152624E+01 Warning: maximum velocity exceeds speed of light 1 0.4132437264E+11 0.1378432697E+01 Warning: maximum velocity exceeds speed of light 1 0.4130695925E+11 0.1377851849E+01 Warning: maximum velocity exceeds speed of light 1 0.4129293520E+11 0.1377384057E+01 Warning: maximum velocity exceeds speed of light 1 0.4128103990E+11 0.1376987272E+01 Warning: maximum velocity exceeds speed of light 1 0.4127040017E+11 0.1376632369E+01 Warning: maximum velocity exceeds speed of light 1 0.4126056586E+11 0.1376304332E+01 Warning: maximum velocity exceeds speed of light 1 0.4125128948E+11 0.1375994905E+01 3890 8.777711 6020.764 -17.072712 2.532380 51.730864 0.000000 0.000000 0.000000 0.217143 -3.277114 3471 21 -6.6824E+00 8.777711 3.179627 -24.848868 5.727878 -99.000000 51.730864 0.000000 0.059838 0.782857 0.637112 5 2.8747E+05 4.021587 6.432555 2.532380 -25.206623 -13.879263 49.071126 0.000002 0.000000 0.371891 0.225E+04 lgRho_cntr log_rel_run_E_err -5.9672248195712658 rel_E_err 1.2643631216718740D-11 k, q, energy_removed_layers before adjustment is 911 0.97839321118192146 9.5208222850147680E+049 k, q, energy_removed_layers after adjustment is 914 0.97790554270931263 9.5231578628240799E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13034.410156250000 max vel inside fraction of cutoff 1741.2170923098524 max c/cs inside fraction of cutoff 2.3241077823910459 average v/vesc outside cutoff 2.4569820041393720 Kinetic plus potential energy outside cutoff 9.5231578628240799E+049 mass inside cutoff 914 50.587898390501543 relax counter 0 log max v [km/s]= 5.6154375287677407 check gamma integral 4.8702625776325552E-002 Warning: maximum velocity exceeds speed of light 1 0.4124242642E+11 0.1375699265E+01 Warning: maximum velocity exceeds speed of light 1 0.4123388671E+11 0.1375414411E+01 Warning: maximum velocity exceeds speed of light 1 0.4122561068E+11 0.1375138353E+01 Warning: maximum velocity exceeds speed of light 1 0.4121755622E+11 0.1374869685E+01 Warning: maximum velocity exceeds speed of light 1 0.4120969184E+11 0.1374607357E+01 Warning: maximum velocity exceeds speed of light 1 0.4120199282E+11 0.1374350546E+01 Warning: maximum velocity exceeds speed of light 1 0.4119443900E+11 0.1374098577E+01 Warning: maximum velocity exceeds speed of light 1 0.4118701340E+11 0.1373850886E+01 Warning: maximum velocity exceeds speed of light 1 0.4117970141E+11 0.1373606984E+01 Warning: maximum velocity exceeds speed of light 1 0.4117249021E+11 0.1373366444E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 3900 8.796772 5944.156 -16.933941 2.583184 51.730864 0.000000 0.000000 0.000000 0.217143 -3.227724 3478 21 -6.8064E+00 8.796772 3.188828 -23.771116 5.987661 -99.000000 51.730864 0.000000 0.059838 0.782857 0.635136 5 2.8747E+05 4.074720 6.428710 2.583184 -23.112509 -13.897667 49.071126 0.000002 0.000000 0.371891 0.226E+04 lgRho_cntr log_rel_run_E_err -5.9671961449401154 rel_E_err 3.8059065357766907D-12 save LOGS/profile25.data for model 3900 save photos/x900 for model 3900 k, q, energy_removed_layers before adjustment is 913 0.97839321118192146 9.5225220774385270E+049 k, q, energy_removed_layers after adjustment is 916 0.97790554270931263 9.5248142380248523E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13089.072265625000 max vel inside fraction of cutoff 1747.1052397023429 max c/cs inside fraction of cutoff 2.4095289517908678 average v/vesc outside cutoff 2.4762731010110506 Kinetic plus potential energy outside cutoff 9.5248142380248523E+049 mass inside cutoff 916 50.587898390501543 relax counter 0 log max v [km/s]= 5.6146071349503481 check gamma integral 4.8202180592026272E-002 Warning: maximum velocity exceeds speed of light 1 0.4116536839E+11 0.1373128886E+01 Warning: maximum velocity exceeds speed of light 1 0.4115832565E+11 0.1372893966E+01 Warning: maximum velocity exceeds speed of light 1 0.4115135261E+11 0.1372661370E+01 Warning: maximum velocity exceeds speed of light 1 0.4114444061E+11 0.1372430811E+01 Warning: maximum velocity exceeds speed of light 1 0.4113758160E+11 0.1372202019E+01 Warning: maximum velocity exceeds speed of light 1 0.4113076804E+11 0.1371974742E+01 Warning: maximum velocity exceeds speed of light 1 0.4112399276E+11 0.1371748744E+01 Warning: maximum velocity exceeds speed of light 1 0.4111724895E+11 0.1371523794E+01 Warning: maximum velocity exceeds speed of light 1 0.4111053004E+11 0.1371299676E+01 Warning: maximum velocity exceeds speed of light 1 0.4110382964E+11 0.1371076174E+01 3910 8.815074 5881.354 -16.802101 2.631982 51.730864 0.000000 0.000000 0.000000 0.217143 -3.180400 3486 21 -6.8501E+00 8.815074 3.196445 -22.330149 6.268266 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633279 5 2.8747E+05 4.125812 6.425493 2.631982 -21.182197 -13.912905 49.071126 0.000002 0.000000 0.371891 0.227E+04 lgRho_cntr log_rel_run_E_err -5.9671814492254285 rel_E_err 3.5711213669972717D-12 k, q, energy_removed_layers before adjustment is 915 0.97823124698352304 9.5252129120043154E+049 k, q, energy_removed_layers after adjustment is 917 0.97790554270931274 9.5261300307426036E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13135.294921875000 max vel inside fraction of cutoff 1756.9851339612787 max c/cs inside fraction of cutoff 2.4116536692600250 average v/vesc outside cutoff 2.4924359177504929 Kinetic plus potential energy outside cutoff 9.5261300307426036E+049 mass inside cutoff 917 50.587898390501543 relax counter 0 log max v [km/s]= 5.6138822869661951 check gamma integral 4.7707334493122658E-002 Warning: maximum velocity exceeds speed of light 1 0.4109714152E+11 0.1370853083E+01 Warning: maximum velocity exceeds speed of light 1 0.4109045948E+11 0.1370630194E+01 Warning: maximum velocity exceeds speed of light 1 0.4108377732E+11 0.1370407301E+01 Warning: maximum velocity exceeds speed of light 1 0.4107708878E+11 0.1370184195E+01 Warning: maximum velocity exceeds speed of light 1 0.4107038745E+11 0.1369960663E+01 Warning: maximum velocity exceeds speed of light 1 0.4106232242E+11 0.1369691643E+01 Warning: maximum velocity exceeds speed of light 1 0.4105261066E+11 0.1369367693E+01 Warning: maximum velocity exceeds speed of light 1 0.4104445205E+11 0.1369095551E+01 Warning: maximum velocity exceeds speed of light 1 0.4103693682E+11 0.1368844870E+01 Warning: maximum velocity exceeds speed of light 1 0.4102968680E+11 0.1368603035E+01 3920 8.834587 5817.342 -16.663041 2.684031 51.730864 0.000000 0.000000 0.000000 0.217143 -3.130083 3509 21 -6.8275E+00 8.834587 3.204296 -20.567463 6.592090 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631339 5 2.8747E+05 4.180353 6.422184 2.684031 -19.207334 -13.928610 49.071126 0.000002 0.000000 0.371891 0.227E+04 lgRho_cntr log_rel_run_E_err -5.9671649359189347 rel_E_err 3.9238672840790124D-12 k, q, energy_removed_layers before adjustment is 916 0.97823124698352304 9.5265765204733989E+049 k, q, energy_removed_layers after adjustment is 918 0.97790554270931274 9.5274636163469301E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13183.880859375000 max vel inside fraction of cutoff 1761.9224777381626 max c/cs inside fraction of cutoff 2.4367026953793709 average v/vesc outside cutoff 2.5092973230098292 Kinetic plus potential energy outside cutoff 9.5274636163469301E+049 mass inside cutoff 918 50.587898390501543 relax counter 0 log max v [km/s]= 5.6130982017671682 check gamma integral 4.7164961132042237E-002 Warning: maximum velocity exceeds speed of light 1 0.4102252481E+11 0.1368364137E+01 Warning: maximum velocity exceeds speed of light 1 0.4101390460E+11 0.1368076598E+01 Warning: maximum velocity exceeds speed of light 1 0.4100352332E+11 0.1367730315E+01 Warning: maximum velocity exceeds speed of light 1 0.4099472078E+11 0.1367436694E+01 Warning: maximum velocity exceeds speed of light 1 0.4098651460E+11 0.1367162966E+01 Warning: maximum velocity exceeds speed of light 1 0.4097849370E+11 0.1366895417E+01 Warning: maximum velocity exceeds speed of light 1 0.4096883835E+11 0.1366573350E+01 Warning: maximum velocity exceeds speed of light 1 0.4095720877E+11 0.1366185429E+01 Warning: maximum velocity exceeds speed of light 1 0.4094714894E+11 0.1365849869E+01 Warning: maximum velocity exceeds speed of light 1 0.4093755966E+11 0.1365530005E+01 3930 8.854698 5742.696 -16.521333 2.740189 51.730864 0.000000 0.000000 0.000000 0.217143 -3.078360 3535 21 -6.7193E+00 8.854698 3.213568 -18.563486 6.940368 -99.000000 51.730864 0.000000 0.059838 0.782857 0.629387 5 2.8747E+05 4.236652 6.418294 2.740189 -17.257814 -13.947158 49.071126 0.000002 0.000000 0.371891 0.228E+04 lgRho_cntr log_rel_run_E_err -5.9671406341527042 rel_E_err 5.5151922138129551D-12 k, q, energy_removed_layers before adjustment is 915 0.97823124698352304 9.5281293318182121E+049 k, q, energy_removed_layers after adjustment is 917 0.97790554270931274 9.5289845728857038E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13242.521484375000 max vel inside fraction of cutoff 1755.2035972270216 max c/cs inside fraction of cutoff 2.4623893933373444 average v/vesc outside cutoff 2.5294633330827834 Kinetic plus potential energy outside cutoff 9.5289845728857038E+049 mass inside cutoff 917 50.587898390501543 relax counter 0 log max v [km/s]= 5.6121219502507529 check gamma integral 4.6587273090217991E-002 Warning: maximum velocity exceeds speed of light 1 0.4092601166E+11 0.1365144805E+01 Warning: maximum velocity exceeds speed of light 1 0.4091209560E+11 0.1364680615E+01 Warning: maximum velocity exceeds speed of light 1 0.4089964164E+11 0.1364265196E+01 Warning: maximum velocity exceeds speed of light 1 0.4088463098E+11 0.1363764494E+01 Warning: maximum velocity exceeds speed of light 1 0.4086652424E+11 0.1363160518E+01 Warning: maximum velocity exceeds speed of light 1 0.4084466223E+11 0.1362431280E+01 Warning: maximum velocity exceeds speed of light 1 0.4081823771E+11 0.1361549853E+01 Warning: maximum velocity exceeds speed of light 1 0.4078625833E+11 0.1360483136E+01 Warning: maximum velocity exceeds speed of light 1 0.4074750085E+11 0.1359190325E+01 Warning: maximum velocity exceeds speed of light 1 0.4071267806E+11 0.1358028762E+01 3940 8.861274 5580.380 -16.475204 2.759851 51.730864 0.000000 0.000000 0.000000 0.217143 -3.061593 3595 21 -6.1859E+00 8.861274 3.234308 -16.683381 7.056021 -99.000000 51.730864 0.000000 0.059838 0.782857 0.628735 5 2.8747E+05 4.255030 6.409965 2.759851 -16.638016 -13.988644 49.071126 0.000002 0.000000 0.371891 0.228E+04 min_dr_div_cs log_rel_run_E_err -5.9659247768107555 rel_E_err 5.5720925238981387D-10 k, q, energy_removed_layers before adjustment is 917 0.97823124698352304 9.5312863513675824E+049 k, q, energy_removed_layers after adjustment is 919 0.97790554270931274 9.5320844207981550E+049 Layers above q= 0.97790554270931274 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13378.861328125000 max vel inside fraction of cutoff 1736.1817958447232 max c/cs inside fraction of cutoff 2.5280025931815486 average v/vesc outside cutoff 2.5755729742687548 Kinetic plus potential energy outside cutoff 9.5320844207981550E+049 mass inside cutoff 919 50.587898390501543 relax counter 0 log max v [km/s]= 5.6097296710452413 check gamma integral 4.6356581866092025E-002 Warning: maximum velocity exceeds speed of light 1 0.4068255102E+11 0.1357023832E+01 Warning: maximum velocity exceeds speed of light 1 0.4065831219E+11 0.1356215312E+01 Warning: maximum velocity exceeds speed of light 1 0.4063883397E+11 0.1355565588E+01 Warning: maximum velocity exceeds speed of light 1 0.4062260085E+11 0.1355024110E+01 Warning: maximum velocity exceeds speed of light 1 0.4060831613E+11 0.1354547623E+01 Warning: maximum velocity exceeds speed of light 1 0.4059524747E+11 0.1354111699E+01 Warning: maximum velocity exceeds speed of light 1 0.4058297362E+11 0.1353702287E+01 Warning: maximum velocity exceeds speed of light 1 0.4057124234E+11 0.1353310974E+01 Warning: maximum velocity exceeds speed of light 1 0.4055989509E+11 0.1352932471E+01 Warning: maximum velocity exceeds speed of light 1 0.4054882667E+11 0.1352563268E+01 3950 8.837869 5475.467 -16.639525 2.692610 51.730864 0.000000 0.000000 0.000000 0.217143 -3.122366 3602 21 -6.6999E+00 8.837869 3.248096 -17.759984 6.649519 -99.000000 51.730864 0.000000 0.059838 0.782857 0.630865 5 2.8747E+05 4.189222 6.404571 2.692610 -18.881793 -14.016225 49.071126 0.000002 0.000000 0.371891 0.229E+04 lgRho_cntr log_rel_run_E_err -5.9658955182172519 rel_E_err 3.8546808462083050D-12 save photos/x950 for model 3950 k, q, energy_removed_layers before adjustment is 920 0.97823124698352293 9.5332071125308099E+049 k, q, energy_removed_layers after adjustment is 922 0.97790554270931263 9.5339758085129283E+049 Layers above q= 0.97790554270931263 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13473.617187500000 max vel inside fraction of cutoff 1718.2136296790702 max c/cs inside fraction of cutoff 2.5692164920109870 average v/vesc outside cutoff 2.6070129154082560 Kinetic plus potential energy outside cutoff 9.5339758085129283E+049 mass inside cutoff 922 50.587898390501543 relax counter 0 log max v [km/s]= 5.6079782918552494 check gamma integral 4.7005638052064029E-002 Warning: maximum velocity exceeds speed of light 1 0.4053796332E+11 0.1352200906E+01 Warning: maximum velocity exceeds speed of light 1 0.4052725043E+11 0.1351843562E+01 Warning: maximum velocity exceeds speed of light 1 0.4051664540E+11 0.1351489816E+01 Warning: maximum velocity exceeds speed of light 1 0.4050611341E+11 0.1351138507E+01 Warning: maximum velocity exceeds speed of light 1 0.4049562487E+11 0.1350788647E+01 Warning: maximum velocity exceeds speed of light 1 0.4048515372E+11 0.1350439367E+01 Warning: maximum velocity exceeds speed of light 1 0.4047467638E+11 0.1350089881E+01 Warning: maximum velocity exceeds speed of light 1 0.4046207168E+11 0.1349669433E+01 Warning: maximum velocity exceeds speed of light 1 0.4044690031E+11 0.1349163371E+01 Warning: maximum velocity exceeds speed of light 1 0.4043413023E+11 0.1348737406E+01 3960 8.818485 5407.360 -16.777361 2.640738 51.730864 0.000000 0.000000 0.000000 0.217143 -3.172781 3600 21 -6.6480E+00 8.818485 3.257196 -19.148203 6.325049 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632690 5 2.8747E+05 4.134833 6.401027 2.640738 -20.828925 -14.034427 49.071101 0.000002 0.000000 0.371891 0.229E+04 lgRho_cntr log_rel_run_E_err -5.9658806531154704 rel_E_err 3.7382333250426638D-12 k, q, energy_removed_layers before adjustment is 995 0.96910703255132069 9.3122877504164940E+049 k, q, energy_removed_layers after adjustment is 1043 0.95048856627597889 1.0242439594832536E+050 Layers above q= 0.95048856627597889 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13538.035156250000 max vel inside fraction of cutoff 1285.9277449824967 max c/cs inside fraction of cutoff 1.1601853464066538 average v/vesc outside cutoff 1.6022420503820110 Kinetic plus potential energy outside cutoff 1.0242439594832536E+050 mass inside cutoff 1043 49.169594518185164 relax counter 0 log max v [km/s]= 5.6067481055034660 check gamma integral 4.7546997182641076E-002 Warning: maximum velocity exceeds speed of light 1 0.4042233239E+11 0.1348343873E+01 Warning: maximum velocity exceeds speed of light 1 0.4041090599E+11 0.1347962729E+01 Warning: maximum velocity exceeds speed of light 1 0.4039956806E+11 0.1347584537E+01 Warning: maximum velocity exceeds speed of light 1 0.4038592727E+11 0.1347129529E+01 Warning: maximum velocity exceeds speed of light 1 0.4036950791E+11 0.1346581838E+01 Warning: maximum velocity exceeds speed of light 1 0.4035543559E+11 0.1346112436E+01 Warning: maximum velocity exceeds speed of light 1 0.4034220141E+11 0.1345670991E+01 Warning: maximum velocity exceeds speed of light 1 0.4032916471E+11 0.1345236134E+01 Warning: maximum velocity exceeds speed of light 1 0.4031347675E+11 0.1344712840E+01 Warning: maximum velocity exceeds speed of light 1 0.4029458833E+11 0.1344082790E+01 3970 8.798719 5329.846 -16.919567 2.587867 51.730864 0.000000 0.000000 0.000000 0.217143 -3.224326 3596 21 -6.4892E+00 8.798719 3.267720 -20.964436 6.018038 -99.000000 51.730864 0.000000 0.059838 0.782857 0.634593 5 2.8747E+05 4.079449 6.396992 2.587867 -22.901371 -14.055478 49.071101 0.000002 0.000000 0.371891 0.230E+04 lgRho_cntr log_rel_run_E_err -5.9658623690340020 rel_E_err 5.7061228233395488D-12 k, q, energy_removed_layers before adjustment is 995 0.96851622516684288 9.4472318617162895E+049 k, q, energy_removed_layers after adjustment is 1044 0.95048856627597900 1.0298182485636357E+050 Layers above q= 0.95048856627597900 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13614.480468750000 max vel inside fraction of cutoff 1265.0588190297774 max c/cs inside fraction of cutoff 1.2157711093411363 average v/vesc outside cutoff 1.6195604069081146 Kinetic plus potential energy outside cutoff 1.0298182485636357E+050 mass inside cutoff 1044 49.169594518185171 relax counter 0 log max v [km/s]= 5.6052467231953971 check gamma integral 4.8101831721151692E-002 Warning: maximum velocity exceeds speed of light 1 0.4027803685E+11 0.1343530692E+01 Warning: maximum velocity exceeds speed of light 1 0.4026211589E+11 0.1342999626E+01 Warning: maximum velocity exceeds speed of light 1 0.4024294833E+11 0.1342360265E+01 Warning: maximum velocity exceeds speed of light 1 0.4021985799E+11 0.1341590054E+01 Warning: maximum velocity exceeds speed of light 1 0.4019903421E+11 0.1340895447E+01 Warning: maximum velocity exceeds speed of light 1 0.4017394361E+11 0.1340058515E+01 Warning: maximum velocity exceeds speed of light 1 0.4014368920E+11 0.1339049337E+01 Warning: maximum velocity exceeds speed of light 1 0.4011506781E+11 0.1338094630E+01 Warning: maximum velocity exceeds speed of light 1 0.4008053951E+11 0.1336942890E+01 Warning: maximum velocity exceeds speed of light 1 0.4003884631E+11 0.1335552154E+01 3980 8.782134 5200.743 -17.040258 2.543533 51.730864 0.000000 0.000000 0.000000 0.217143 -3.267650 3580 21 -6.1632E+00 8.782134 3.285657 -23.250547 5.786607 -99.000000 51.730864 0.000000 0.059838 0.782857 0.636229 5 2.8747E+05 4.033048 6.390270 2.543533 -24.711171 -14.091358 49.071101 0.000002 0.000000 0.371891 0.230E+04 max increase log_rel_run_E_err -5.9658196994033617 rel_E_err 1.7936716047435250D-11 k, q, energy_removed_layers before adjustment is 999 0.96743934864279424 9.6846210370787773E+049 k, q, energy_removed_layers after adjustment is 1049 0.95107944936807398 1.0383618868314063E+050 Layers above q= 0.95107944936807398 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13749.808593750000 max vel inside fraction of cutoff 1275.2180116437441 max c/cs inside fraction of cutoff 1.2640057689941309 average v/vesc outside cutoff 1.6623373343894199 Kinetic plus potential energy outside cutoff 1.0383618868314063E+050 mass inside cutoff 1049 49.200161410914660 relax counter 0 log max v [km/s]= 5.6024815551318712 check gamma integral 4.8587228627357877E-002 Warning: maximum velocity exceeds speed of light 1 0.3998844752E+11 0.1333871031E+01 Warning: maximum velocity exceeds speed of light 1 0.3992745171E+11 0.1331836430E+01 Warning: maximum velocity exceeds speed of light 1 0.3985353056E+11 0.1329370686E+01 Warning: maximum velocity exceeds speed of light 1 0.3979035762E+11 0.1327263464E+01 Warning: maximum velocity exceeds speed of light 1 0.3973949724E+11 0.1325566944E+01 Warning: maximum velocity exceeds speed of light 1 0.3969860469E+11 0.1324202915E+01 Warning: maximum velocity exceeds speed of light 1 0.3966562604E+11 0.1323102866E+01 Warning: maximum velocity exceeds speed of light 1 0.3963731218E+11 0.1322158417E+01 Warning: maximum velocity exceeds speed of light 1 0.3961184318E+11 0.1321308863E+01 Warning: maximum velocity exceeds speed of light 1 0.3958818592E+11 0.1320519742E+01 3990 8.804606 5005.074 -16.877352 2.603445 51.730864 0.000000 0.000000 0.000000 0.217143 -3.209552 3589 21 -6.4346E+00 8.804606 3.313869 -22.604795 6.106028 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633898 5 2.8747E+05 4.095683 6.380074 2.603445 -22.275293 -14.147790 49.071101 0.000002 0.000000 0.371891 0.230E+04 lgRho_cntr log_rel_run_E_err -5.9656996837102216 rel_E_err 3.3490040038087259D-12 k, q, energy_removed_layers before adjustment is 998 0.96700061197379916 9.9089089255418437E+049 k, q, energy_removed_layers after adjustment is 1046 0.95251645639853133 1.0503757749079376E+050 Layers above q= 0.95251645639853133 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -13976.343750000000 max vel inside fraction of cutoff 1278.3104232117144 max c/cs inside fraction of cutoff 1.3426866996467035 average v/vesc outside cutoff 1.7441470452977905 Kinetic plus potential energy outside cutoff 1.0503757749079376E+050 mass inside cutoff 1046 49.274499025815388 relax counter 0 log max v [km/s]= 5.5975656012360488 check gamma integral 4.8017824872653610E-002 Warning: maximum velocity exceeds speed of light 1 0.3956572832E+11 0.1319770637E+01 Warning: maximum velocity exceeds speed of light 1 0.3954408705E+11 0.1319048762E+01 Warning: maximum velocity exceeds speed of light 1 0.3952300601E+11 0.1318345574E+01 Warning: maximum velocity exceeds speed of light 1 0.3950230135E+11 0.1317654941E+01 Warning: maximum velocity exceeds speed of light 1 0.3948183077E+11 0.1316972116E+01 Warning: maximum velocity exceeds speed of light 1 0.3946147558E+11 0.1316293140E+01 Warning: maximum velocity exceeds speed of light 1 0.3944112933E+11 0.1315614462E+01 Warning: maximum velocity exceeds speed of light 1 0.3941665392E+11 0.1314798050E+01 Warning: maximum velocity exceeds speed of light 1 0.3938719799E+11 0.1313815506E+01 Warning: maximum velocity exceeds speed of light 1 0.3936199840E+11 0.1312974938E+01 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4000 8.824056 4918.850 -16.737929 2.655346 51.730864 0.000000 0.000000 0.000000 0.217143 -3.159315 3615 21 -6.4174E+00 8.824056 3.326766 -20.883433 6.416568 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631946 5 2.8747E+05 4.150011 6.375680 2.655346 -20.261254 -14.173587 49.071101 0.000002 0.000000 0.371891 0.230E+04 lgRho_cntr log_rel_run_E_err -5.9656856583802886 rel_E_err 3.7439056157398914D-12 save LOGS/profile26.data for model 4000 save photos/4000 for model 4000 k, q, energy_removed_layers before adjustment is 999 0.96659289865433751 1.0014875293229030E+050 k, q, energy_removed_layers after adjustment is 1043 0.95311778839865691 1.0553989833119357E+050 Layers above q= 0.95311778839865691 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14085.802734375000 max vel inside fraction of cutoff 1272.6342285346907 max c/cs inside fraction of cutoff 1.4343194877271501 average v/vesc outside cutoff 1.7821746456854108 Kinetic plus potential energy outside cutoff 1.0553989833119357E+050 mass inside cutoff 1043 49.305606449582548 relax counter 0 log max v [km/s]= 5.5950771393748102 check gamma integral 4.7482495545068858E-002 Warning: maximum velocity exceeds speed of light 1 0.3933823420E+11 0.1312182250E+01 Warning: maximum velocity exceeds speed of light 1 0.3930964039E+11 0.1311228463E+01 Warning: maximum velocity exceeds speed of light 1 0.3927521817E+11 0.1310080261E+01 Warning: maximum velocity exceeds speed of light 1 0.3924464278E+11 0.1309060376E+01 Warning: maximum velocity exceeds speed of light 1 0.3920783025E+11 0.1307832442E+01 Warning: maximum velocity exceeds speed of light 1 0.3916347964E+11 0.1306353065E+01 Warning: maximum velocity exceeds speed of light 1 0.3911000471E+11 0.1304569333E+01 Warning: maximum velocity exceeds speed of light 1 0.3904547323E+11 0.1302416795E+01 Warning: maximum velocity exceeds speed of light 1 0.3896752184E+11 0.1299816617E+01 Warning: maximum velocity exceeds speed of light 1 0.3887325660E+11 0.1296672267E+01 4010 8.832133 4753.537 -16.680383 2.676939 51.730864 0.000000 0.000000 0.000000 0.217143 -3.138583 3673 21 -5.8631E+00 8.832133 3.352269 -19.266867 6.552419 -99.000000 51.730864 0.000000 0.059838 0.782857 0.631128 5 2.8747E+05 4.172556 6.367300 2.676939 -19.449203 -14.224600 49.071101 0.000002 0.000000 0.371891 0.229E+04 max increase log_rel_run_E_err -5.9656434454869292 rel_E_err 1.0627930201834876D-11 k, q, energy_removed_layers before adjustment is 1006 0.96598055847203756 1.0192182576534548E+050 k, q, energy_removed_layers after adjustment is 1049 0.95373340496441672 1.0641561557710974E+050 Layers above q= 0.95373340496441672 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14314.232421875000 max vel inside fraction of cutoff 1234.4843463886887 max c/cs inside fraction of cutoff 1.4755522071989642 average v/vesc outside cutoff 1.8454553047767690 Kinetic plus potential energy outside cutoff 1.0641561557710974E+050 mass inside cutoff 1049 49.337452826268262 relax counter 0 log max v [km/s]= 5.5896509251250892 check gamma integral 4.7237113488481676E-002 Warning: maximum velocity exceeds speed of light 1 0.3875913210E+11 0.1292865483E+01 Warning: maximum velocity exceeds speed of light 1 0.3866721378E+11 0.1289799418E+01 Warning: maximum velocity exceeds speed of light 1 0.3859329427E+11 0.1287333729E+01 Warning: maximum velocity exceeds speed of light 1 0.3853391761E+11 0.1285353136E+01 Warning: maximum velocity exceeds speed of light 1 0.3848626428E+11 0.1283763592E+01 Warning: maximum velocity exceeds speed of light 1 0.3844364550E+11 0.1282341983E+01 Warning: maximum velocity exceeds speed of light 1 0.3840231006E+11 0.1280963181E+01 Warning: maximum velocity exceeds speed of light 1 0.3835254992E+11 0.1279303361E+01 Warning: maximum velocity exceeds speed of light 1 0.3829261425E+11 0.1277304123E+01 Warning: maximum velocity exceeds speed of light 1 0.3823584125E+11 0.1275410379E+01 4020 8.805189 4570.933 -16.873050 2.604797 51.730864 0.000000 0.000000 0.000000 0.217143 -3.208964 3729 21 -6.1024E+00 8.805189 3.381715 -21.447313 6.115875 -99.000000 51.730864 0.000000 0.059838 0.782857 0.633647 5 2.8747E+05 4.096915 6.358143 2.604797 -22.212711 -14.283497 49.071101 0.000002 0.000000 0.371891 0.228E+04 lgRho_cntr log_rel_run_E_err -5.9655822742279430 rel_E_err 8.8084363069944634D-12 k, q, energy_removed_layers before adjustment is 1013 0.96532710614108574 1.0372314629212974E+050 k, q, energy_removed_layers after adjustment is 1055 0.95435088950040081 1.0727639539101076E+050 Layers above q= 0.95435088950040081 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -14599.361328125000 max vel inside fraction of cutoff 1180.8984599954374 max c/cs inside fraction of cutoff 1.4866407000176984 average v/vesc outside cutoff 1.9192318414387346 Kinetic plus potential energy outside cutoff 1.0727639539101076E+050 mass inside cutoff 1055 49.369395834667131 relax counter 0 log max v [km/s]= 5.5824706497637830 check gamma integral 4.8002472314351105E-002 Warning: maximum velocity exceeds speed of light 1 0.3816743706E+11 0.1273128661E+01 Warning: maximum velocity exceeds speed of light 1 0.3808496053E+11 0.1270377540E+01 Warning: maximum velocity exceeds speed of light 1 0.3798543982E+11 0.1267057887E+01 Warning: maximum velocity exceeds speed of light 1 0.3786523533E+11 0.1263048296E+01 Warning: maximum velocity exceeds speed of light 1 0.3771996864E+11 0.1258202721E+01 Warning: maximum velocity exceeds speed of light 1 0.3760054878E+11 0.1254219303E+01 Warning: maximum velocity exceeds speed of light 1 0.3749977402E+11 0.1250857819E+01 Warning: maximum velocity exceeds speed of light 1 0.3740917660E+11 0.1247835814E+01 Warning: maximum velocity exceeds speed of light 1 0.3732397631E+11 0.1244993839E+01 Warning: maximum velocity exceeds speed of light 1 0.3722134836E+11 0.1241570539E+01 4030 8.817420 4336.596 -16.785302 2.637515 51.730864 0.000000 0.000000 0.000000 0.217143 -3.177404 3733 21 -5.8660E+00 8.817420 3.422065 -21.027078 6.308607 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632406 5 2.8747E+05 4.131054 6.347419 2.637515 -20.938015 -14.364204 49.071101 0.000002 0.000000 0.371891 0.224E+04 max increase log_rel_run_E_err -5.9653268478618156 rel_E_err 1.7150705403793606D-11 k, q, energy_removed_layers before adjustment is 1008 0.96463146168217917 1.0554157698553600E+050 k, q, energy_removed_layers after adjustment is 1128 0.93891494953171750 1.1533729298841623E+050 Layers above q= 0.93891494953171750 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -15032.294921875000 max vel inside fraction of cutoff 841.30753920757468 max c/cs inside fraction of cutoff 0.86569319980030113 average v/vesc outside cutoff 1.6737660054278973 Kinetic plus potential energy outside cutoff 1.1533729298841623E+050 mass inside cutoff 1128 48.570881327290266 relax counter 0 log max v [km/s]= 5.5707921016396993 check gamma integral 4.7699406735203460E-002 Warning: maximum velocity exceeds speed of light 1 0.3709763015E+11 0.1237443744E+01 Warning: maximum velocity exceeds speed of light 1 0.3698214792E+11 0.1233591671E+01 Warning: maximum velocity exceeds speed of light 1 0.3686829720E+11 0.1229794020E+01 Warning: maximum velocity exceeds speed of light 1 0.3675467753E+11 0.1226004076E+01 Warning: maximum velocity exceeds speed of light 1 0.3661773765E+11 0.1221436253E+01 Warning: maximum velocity exceeds speed of light 1 0.3645260560E+11 0.1215928040E+01 Warning: maximum velocity exceeds speed of light 1 0.3630614684E+11 0.1211042702E+01 Warning: maximum velocity exceeds speed of light 1 0.3612956562E+11 0.1205152586E+01 Warning: maximum velocity exceeds speed of light 1 0.3591654217E+11 0.1198046889E+01 Warning: maximum velocity exceeds speed of light 2 0.3572881968E+11 0.1191785141E+01 4040 8.811874 4070.240 -16.825031 2.622830 51.730864 0.000000 0.000000 0.000000 0.217143 -3.191865 3749 21 -5.6049E+00 8.811874 3.471712 -21.312081 6.219944 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632934 5 2.8747E+05 4.115503 6.336597 2.622830 -21.511760 -14.463502 49.071101 0.000002 0.000000 0.371891 0.218E+04 min_dr_div_cs log_rel_run_E_err -5.9651201497382029 rel_E_err 5.1025646758683529D-11 k, q, energy_removed_layers before adjustment is 1007 0.96401921550618097 1.0724610935727242E+050 k, q, energy_removed_layers after adjustment is 1122 0.93978009637474091 1.1696202332662773E+050 Layers above q= 0.93978009637474091 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -15644.054687500000 max vel inside fraction of cutoff 685.73474791206058 max c/cs inside fraction of cutoff 0.76766442118811529 average v/vesc outside cutoff 1.7879370432816069 Kinetic plus potential energy outside cutoff 1.1696202332662773E+050 mass inside cutoff 1122 48.615636120750665 relax counter 0 log max v [km/s]= 5.5530186693550974 check gamma integral 4.7875145404909454E-002 Warning: maximum velocity exceeds speed of light 2 0.3554724130E+11 0.1185728338E+01 Warning: maximum velocity exceeds speed of light 2 0.3536752627E+11 0.1179733690E+01 Warning: maximum velocity exceeds speed of light 2 0.3518949094E+11 0.1173795071E+01 Warning: maximum velocity exceeds speed of light 3 0.3497500172E+11 0.1166640480E+01 Warning: maximum velocity exceeds speed of light 3 0.3473987131E+11 0.1158797374E+01 Warning: maximum velocity exceeds speed of light 3 0.3452333469E+11 0.1151574490E+01 Warning: maximum velocity exceeds speed of light 3 0.3426115757E+11 0.1142829202E+01 Warning: maximum velocity exceeds speed of light 4 0.3395957034E+11 0.1132769335E+01 Warning: maximum velocity exceeds speed of light 4 0.3371071898E+11 0.1124468547E+01 Warning: maximum velocity exceeds speed of light 4 0.3347821515E+11 0.1116713055E+01 4050 8.813500 3740.653 -16.813376 2.627443 51.730864 0.000000 0.000000 0.000000 0.217143 -3.187655 3741 21 -5.4543E+00 8.813500 3.538862 -21.267609 6.245733 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632773 5 2.8747E+05 4.120048 6.324207 2.627443 -21.342837 -14.597799 49.071101 0.000002 0.000000 0.371891 0.205E+04 min_dr_div_cs log_rel_run_E_err -5.9649241080658237 rel_E_err 2.2061927252749217D-11 save photos/x050 for model 4050 k, q, energy_removed_layers before adjustment is 1038 0.95557991440503454 1.1457269260873430E+050 k, q, energy_removed_layers after adjustment is 1155 0.93388631769951236 1.2022588972668795E+050 Layers above q= 0.93388631769951236 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -16648.755859375000 max vel inside fraction of cutoff 382.69923194831080 max c/cs inside fraction of cutoff 0.41808031530290213 average v/vesc outside cutoff 1.8101510778564911 Kinetic plus potential energy outside cutoff 1.2022588972668795E+050 mass inside cutoff 1155 48.310745859128332 relax counter 0 log max v [km/s]= 5.5247622961123888 check gamma integral 4.7862896850382544E-002 Warning: maximum velocity exceeds speed of light 5 0.3320553376E+11 0.1107617382E+01 Warning: maximum velocity exceeds speed of light 5 0.3289290667E+11 0.1097189265E+01 Warning: maximum velocity exceeds speed of light 5 0.3262628628E+11 0.1088295766E+01 Warning: maximum velocity exceeds speed of light 6 0.3238070048E+11 0.1080103906E+01 Warning: maximum velocity exceeds speed of light 6 0.3209692302E+11 0.1070638108E+01 Warning: maximum velocity exceeds speed of light 6 0.3174943608E+11 0.1059047192E+01 Warning: maximum velocity exceeds speed of light 7 0.3147491237E+11 0.1049890066E+01 Warning: maximum velocity exceeds speed of light 7 0.3122130390E+11 0.1041430599E+01 Warning: maximum velocity exceeds speed of light 8 0.3096849786E+11 0.1032997897E+01 Warning: maximum velocity exceeds speed of light 8 0.3068857237E+11 0.1023660587E+01 4060 8.813431 3399.954 -16.813876 2.627661 51.730864 0.000000 0.000000 0.000000 0.217143 -3.187834 3740 21 -5.2719E+00 8.813431 3.615470 -21.333106 6.244621 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632780 5 2.8747E+05 4.119855 6.311526 2.627661 -21.350022 -14.750988 49.071101 0.000002 0.000000 0.371891 0.183E+04 max increase log_rel_run_E_err -5.9647578391200851 rel_E_err 2.2795019605048728D-11 k, q, energy_removed_layers before adjustment is 1041 0.95435088950040214 1.1766624719145081E+050 k, q, energy_removed_layers after adjustment is 1133 0.93712260032645889 1.2197670172216402E+050 Layers above q= 0.93712260032645889 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -18149.199218750000 max vel inside fraction of cutoff 370.08472065987803 max c/cs inside fraction of cutoff 0.48421426955705354 average v/vesc outside cutoff 2.0728727630779815 Kinetic plus potential energy outside cutoff 1.2197670172216402E+050 mass inside cutoff 1133 48.478161554760185 relax counter 0 log max v [km/s]= 5.4869766855192621 check gamma integral 4.7896029833327365E-002 Warning: maximum velocity exceeds speed of light 8 0.3034362147E+11 0.1012154264E+01 Warning: maximum velocity exceeds speed of light 9 0.3005431661E+11 0.1002504093E+01 4070 8.813233 3066.597 -16.815298 2.627864 51.730864 0.000000 0.000000 0.000000 0.217143 -3.188348 3748 21 -4.9631E+00 8.813233 3.708166 -21.400756 6.241463 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632799 5 2.8747E+05 4.119301 6.317652 2.627864 -21.370564 -14.936255 49.071101 0.000002 0.000000 0.371891 0.135E+04 min_dr_div_cs log_rel_run_E_err -5.9646432122780215 rel_E_err 2.0239219872769335D-11 k, q, energy_removed_layers before adjustment is 1053 0.95003492762414210 1.2151824577016744E+050 k, q, energy_removed_layers after adjustment is 1114 0.93906141993338987 1.2365497928442298E+050 Layers above q= 0.93906141993338987 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -20887.113281250000 max vel inside fraction of cutoff 351.84176694548904 max c/cs inside fraction of cutoff 0.55849135331117461 average v/vesc outside cutoff 2.4323914566646683 Kinetic plus potential energy outside cutoff 1.2365497928442298E+050 mass inside cutoff 1114 48.578458367682629 relax counter 0 log max v [km/s]= 5.4228071977048184 check gamma integral 4.7934108706807761E-002 4080 8.813091 2993.872 -16.816316 2.628628 51.730864 0.000000 0.000000 0.000000 0.217143 -3.188715 3804 21 -4.8231E+00 8.813091 3.786273 -21.448938 6.239206 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632813 5 2.8747E+05 4.118905 6.432174 2.628628 -21.385261 -15.091917 49.071101 0.000002 0.000000 0.371891 0.702E+03 min_dr_div_cs log_rel_run_E_err -5.9646021724885721 rel_E_err 4.5711407550411709D-12 k, q, energy_removed_layers before adjustment is 1052 0.94841431355515771 1.2358554545336451E+050 k, q, energy_removed_layers after adjustment is 1108 0.93926891989268035 1.2486663029121836E+050 Layers above q= 0.93926891989268035 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -25187.392578125000 max vel inside fraction of cutoff 271.71475235482313 max c/cs inside fraction of cutoff 0.48543204337573342 average v/vesc outside cutoff 2.8492984899766207 Kinetic plus potential energy outside cutoff 1.2486663029121836E+050 mass inside cutoff 1108 48.589192519804861 relax counter 0 log max v [km/s]= 5.3177435100590857 check gamma integral 4.7963851438131290E-002 4090 8.812997 2957.906 -16.816995 2.630254 51.730864 0.000000 0.000000 0.000000 0.217143 -3.188960 3867 21 -4.5089E+00 8.812997 3.862831 -21.481245 6.237701 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632822 5 2.8747E+05 4.118641 6.564292 2.630254 -21.395069 -15.244393 49.071101 0.000002 0.000000 0.371891 0.583E+03 min_dr_div_cs log_rel_run_E_err -5.9645823541281144 rel_E_err 6.2645475694488533D-12 k, q, energy_removed_layers before adjustment is 1055 0.94638133568588301 1.2498663226769342E+050 k, q, energy_removed_layers after adjustment is 1106 0.93962728529356421 1.2563344165673294E+050 Layers above q= 0.93962728529356421 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -32325.251953125000 max vel inside fraction of cutoff 188.41217430838961 max c/cs inside fraction of cutoff 0.38695455404286855 average v/vesc outside cutoff 3.4285394344831515 Kinetic plus potential energy outside cutoff 1.2563344165673294E+050 mass inside cutoff 1106 48.607731071530779 relax counter 0 log max v [km/s]= 5.2017106001588829 check gamma integral 4.7984828973894236E-002 __________________________________________________________________________________________________________________________________________________ step lg_Tmax Teff lg_LH lg_Lnuc_tot Mass H_rich H_cntr N_cntr Y_surf eta_cntr zones retry lg_dt_yrs lg_Tcntr lg_R lg_L3a lg_Lneu lg_Mdot He_core He_cntr O_cntr Z_surf gam_cntr iters age_yrs lg_Dcntr lg_L lg_LZ lg_Lphoto lg_Dsurf CO_core C_cntr Ne_cntr Si_cntr v_div_cs dt_limit __________________________________________________________________________________________________________________________________________________ 4100 8.812951 2533.649 -16.817326 2.632825 51.730864 0.000000 0.000000 0.000000 0.217143 -3.189079 3933 21 -4.4387E+00 8.812951 3.973683 -21.496948 6.236968 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632827 5 2.8747E+05 4.118512 6.517045 2.632825 -21.399850 -15.466241 49.071101 0.000002 0.000000 0.371891 0.710E+03 min_dr_div_cs log_rel_run_E_err -5.9645667413419474 rel_E_err 3.4947549559110729D-12 save LOGS/profile27.data for model 4100 save photos/x100 for model 4100 k, q, energy_removed_layers before adjustment is 1061 0.94500750730404415 1.2571459418144942E+050 k, q, energy_removed_layers after adjustment is 1109 0.94034653189758965 1.2604310199326803E+050 Layers above q= 0.94034653189758965 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -42692.568359375000 max vel inside fraction of cutoff 113.29750210153819 max c/cs inside fraction of cutoff 0.28529353598035623 average v/vesc outside cutoff 4.1428570076256257 Kinetic plus potential energy outside cutoff 1.2604310199326803E+050 mass inside cutoff 1109 48.644938319606446 relax counter 0 log max v [km/s]= 5.1661248779921811 check gamma integral 4.7994596010596337E-002 4110 8.812935 2242.401 -16.817435 2.636327 51.730864 0.000000 0.000000 0.000000 0.217143 -3.189119 3975 21 -4.2469E+00 8.812935 4.066918 -21.502170 6.236724 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632828 9 2.8747E+05 4.118469 6.491383 2.636327 -21.401438 -15.651791 49.071101 0.000002 0.000000 0.371891 0.418E+03 max increase log_rel_run_E_err -5.9645519007305454 rel_E_err 6.3987638099903270D-12 k, q, energy_removed_layers before adjustment is 1074 0.94415425996335178 1.2607050604492232E+050 k, q, energy_removed_layers after adjustment is 1111 0.94075614663434692 1.2625598069633544E+050 Layers above q= 0.94075614663434692 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -56566.005859375000 max vel inside fraction of cutoff 39.826246884283869 max c/cs inside fraction of cutoff 0.10658846251236190 average v/vesc outside cutoff 4.9284912583243132 Kinetic plus potential energy outside cutoff 1.2625598069633544E+050 mass inside cutoff 1111 48.666128043743726 relax counter 0 log max v [km/s]= 5.1295670396714863 check gamma integral 4.7997742275325606E-002 retry: adjust_correction failed in eval_equations -- give up in solver 4119 4120 8.812940 2186.074 -16.817401 2.641599 51.730864 0.000000 0.000000 0.000000 0.217143 -3.189106 4001 22 -4.1959E+00 8.812940 4.097265 -21.500553 6.236801 -99.000000 51.730864 0.000000 0.059838 0.782857 0.632828 12 2.8747E+05 4.118483 6.507883 2.641599 -21.400938 -15.281087 49.072201 0.000002 0.000000 0.371891 0.107E+03 max increase log_rel_run_E_err -5.9645345807508638 rel_E_err 3.3662077958601832D-12 k, q, energy_removed_layers before adjustment is 1058 0.94350051353033493 1.2628315141333436E+050 k, q, energy_removed_layers after adjustment is 1087 0.94113653056156299 1.2638076367974525E+050 Layers above q= 0.94113653056156299 will be removed checking for conditions inside q= 0.98999999999999999 of material that will remain check time left -77669.830078125000 max vel inside fraction of cutoff 16.860297302191864 max c/cs inside fraction of cutoff 4.7286041077809843E-002 average v/vesc outside cutoff 5.9270006661755108 Kinetic plus potential energy outside cutoff 1.2638076367974525E+050 mass inside cutoff 1087 48.685805632855327 relax counter 7 log max v [km/s]= 5.0890530153482212 check gamma integral 4.7999121341521407E-002 residual_norm > tol_residual_norm 4126 1.0816024510829297D-06 9.9999999999999995D-07 max_residual > tol_max_residual 4126 1.1388053014863544D-01 1.0000000000000000D-03 retry: avg+max resid -- give up in solver 4126 residual_norm > tol_residual_norm 4126 1.1501525284478985D-04 9.9999999999999995D-07 max_residual > tol_max_residual 4126 1.4185730130975895D+01 1.0000000000000000D-03 max_abs_correction > tol_max_correction*coeff 4126 1.8572861584248396D-02 8.4888378216234827D-04 2.8296126072078276D-01 retry: max corr, avg+max resid -- give up in solver 4126 retry 4126 retry 4127 retry 4127 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 retry 4128 max_abs_correction > tol_max_correction*coeff 4128 1.1949931337284267D-02 1.4709954554057527D-03 4.9033181846858426D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.4093632903009119D-02 8.9345943535390211D-04 2.9781981178463401D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.3328395443404405D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.3947816499184012D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.8113906011505518D-02 1.1446590059445909D-03 3.8155300198153025D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.2188754014223775D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.3347447206324513D-02 1.3580264950738155D-03 4.5267549835793847D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.6244131811196917D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.2381032963122081D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.4817297082159778D-02 1.4933130859813128D-03 4.9777102866043760D-01 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 5.7887073502220826D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 6.8038766373462303D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.4652103342201640D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.6526449611558003D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.0425197700124333D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.2986330276454921D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.9241750437594799D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.2023441679228612D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.5344688588200236D-02 6.2435703614560861D-04 2.0811901204853619D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.9697568497523606D-02 1.0330097527427016D-03 3.4433658424756719D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.0124238323387694D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 5.4328093153096758D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.6000771535903475D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 4.8246906762678600D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.5648619369453767D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 6.7433608974519832D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 6.3055597751724234D-06 6.0000000000000002D-06 2.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 7.1610282466165784D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.7281219258167823D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 6.7966265220153344D-06 6.0000000000000002D-06 2.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 7.2823442808689492D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.2781000314977757D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.4007712979621033D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.1084678014478428D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.2938254057164929D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 6.2250068079943882D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 4.4860718019956447D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.1760559439431903D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 3.7242832576789245D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.3700899384929697D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.7311606425765911D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 4.0473160857696013D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.1783601080532008D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.0751697342724669D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 3.2260440047837111D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.1541389177284138D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 2.4500567213290657D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.6699351544540675D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 3.3146238087371604D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.6701926732497991D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 3.3146238087622064D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 4.3623267413169140D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 2.7322014179889702D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.3522658660280780D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 1.6816360515269874D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.9588410141394107D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.3180681393941048D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 4.4332701725207410D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.2612043607135099D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.2589786621958874D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.1878701039527607D-02 1.4775713722343772D-03 4.9252379074479241D-01 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.8362980836077745D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 2.5544858481134636D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 4.1552213611340372D-02 3.0000000000000001D-03 1.0000000000000000D+00 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 3.8577618225478079D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 2.7248946661953655D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 max_abs_correction > tol_max_correction*coeff 4128 3.5978122779731107D-02 6.0000000000000006D-04 2.0000000000000001D-01 retry: max corr -- give up in solver 4128 correction_norm > tol_correction_norm*coeff 4128 7.4249675539099061D-06 3.0000000000000001D-06 1.0000000000000001D-01 max_abs_correction > tol_max_correction*coeff 4128 3.1266896547856950D-02 3.0000000000000003D-04 1.0000000000000001D-01 retry: avg+max corr -- give up in solver 4128 dt 5.0423955702534588D-21 min_timestep_limit 9.9999999999999995D-21 stopping because of problems dt < min_timestep_limit terminated evolution: cannot find acceptable model termination code: min_timestep_limit runtime (minutes), retries, steps 16.27 101 4128 DATE: 2025-09-19 TIME: 06:10:25 ****************************************************************** failed to create final.mod when running inlist_pulses_header ****************************************************************** ******************** ppisn failed: non-zero exit code ********************